Red Hat Enterprise Linux 5
International Language Support Guide
Internationalization Guide
Edition 0
Legal Notice
Copyright © 2008 Red Hat.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at
http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, JBoss, MetaMatrix, Fedora, the Infinity Logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
All other trademarks are the property of their respective owners.
1801 Varsity Drive
Raleigh, NC 27606-2072 USA
Phone: +1 919 754 3700
Phone: 888 733 4281
Fax: +1 919 754 3701
Abstract
This book is about international language support for Red Hat Enterprise Linux 5.
This guide explains how to use international languages supported in Red Hat Enterprise Linux 5. It explains how to:
install the packages that are required to support your language, such as fonts to display its characters and input methods.
set the language so that used applications will run and appear in the chosen language.
configure the keyboard in order to input your language correctly.
use the SCIM input method for Asian languages.
The next chapter introduces language support installation during and after installation. Chapter 3 describes how to change your default language while chapter 4 discusses keyboard installation and configuration. System documentation is discussed in chapter 5. Adding fonts is discussed in chapter 6 while chapter 7 describes how to use the Smart Common Input Method. Chapter 8 describes how to write in Japanese, Chinese, Korean and Indic languages. In chapter 9 advanced topics discussed include using the iconv and iconvmv tools. Language support in shipped applications including Firefox Evolution and gedit, the Gnome text editor are discussed in chapter 10.
Chapter 2. Installing and supporting languages
Red Hat Enterprise Linux 5 supports installation of multiple languages and changing of languages based on your requirements. Please only install those languages that you will use as this will save you a significant amount of disk space.
The following languages are supported in Red Hat Enterprise Linux 5:
East Asian Languages - Chinese (Simplified), Chinese (Traditional), Japanese and Korean.
European Languages - French, German, Italian, Portuguese (Brazilian), Russian and Spanish.
Indic Languages - Assamese, Bengali, Gujarati, Hindi, Kannada, Malayalam, Marathi, Oriya, Punjabi, Sinhalese, Tamil and Telugu.
The table below summarizes the currently supported languages, their locales, default fonts installed and packages required for some of the supported languages.
Table 2.1. Red Hat Enterprise Linux 5 International Languages
|
Territory
|
Language
|
Locale
|
Fonts
|
Package Names
|
|---|
|
China
|
Simplified Chinese
|
zh_CN.UTF-8
|
AR PL (ShanHeiSun and Zenkai) Uni
|
fonts-chinese, scim-pinyin, scim-tables
|
|
Japan
|
Japanese
|
ja_JP.UTF-8
|
Sazanami (Gothic and Mincho)
|
fonts-japanese, scim-anthy
|
|
Korea
|
Hangul
|
ko_KR.UTF-8
|
Baekmuk (Batang, Dotum, Gulim, Headline)
|
fonts-korean, scim-hangul
|
|
Taiwan
|
Traditional Chinese
|
zh_TW.UTF-8
|
AR PL (ShanHeiSun and Zenkai) Uni
|
fonts-chinese, scim-chewing, scim-tables
|
|
Brazil
|
Portuguese
|
pt_BR.UTF-8
|
standard latin fonts
|
|
|
France
|
French
|
ft_FR.UTF-8
|
standard latin fonts
|
|
|
Germany
|
German
|
de_DE.UTF-8
|
standard latin fonts
|
|
|
Italy
|
Italy
|
it_IT.UTF-8
|
standard latin fonts
|
|
|
Russia
|
Russian
|
ru_RU.UTF-8
|
KOI8-R, fonts-KOI8-R-100dpi, fonts-KOI8-R-75dpi and xorg-x11-fonts-cyrillic
|
fonts-KO18-R, fonts-KO18-R-100 dpi,fonts-KO18-R-75dpi, xorg-x11-fonts-cyrillic
|
|
Spain
|
Spanish
|
es_ES.UTF-8
|
standard latin fonts
|
|
|
India
|
Assamese
|
as_IN.UTF-8
|
Lohit Bengali
|
fonts-bengali, scim-m17n, m17n-db-assamese
|
|
Bengali
|
bn_IN.UTF-8
|
Lohit Bengali
|
fonts-bengali, scim-m17n, m17n-db-bengali
|
|
Gujarati
|
gu_IN.UTF-8
|
Lohit Gujarati
|
fonts-gujarati, scim-m17n, m17n-db-gujarati
|
|
Hindi
|
hi_IN.UTF-8
|
Lohit Hindi
|
fonts-hindi, scim-m17n, m17n-db-hindi
|
|
Kannada
|
kn_IN.UTF-8
|
Lohit Kannada
|
fonts-kannada, scim-m17n, m17n-db-kannada
|
|
Malayalam
|
ml_IN.UTF-8
|
Lohit Malayalam
|
fonts-malayalam, scim-m17n, m17n-db-malayalam
|
|
Marathi
|
mr_IN.UTF-8
|
Lohit Hindi
|
fonts-hindi, scim-m17n, m17n-db-marathi
|
|
Oriya
|
or_IN.UTF-8
|
Lohit Oriya
|
fonts-oriya, scim-m17n, m17n-db-oriya
|
|
Punjabi
|
pa_IN.UTF-8
|
Lohit Punjabi
|
fonts-punjabi, scim-m17n, m17n-db-punjabi
|
|
Tamil
|
ta_IN.UTF-8
|
Lohit Tamil
|
fonts-tamil, scim-m17n, m17n-db-tamil
|
|
Telugu
|
te_IN.UTF-8
|
Lohit Telugu
|
fonts-telugu, scim-m17n, m17n-db-telugu
|
|
Sri Lanka
|
Sinhala
|
si_LK.UTF-8
|
LKLUG
|
fonts-sinhala, scim-sinhala, scim-m17n, m17n-db-sinhala
|
Red Hat Enterprise Linux 5 uses the UTF-8 (8bit Unicode Transformation Format) encoding for supported locales. This allows you to create, edit and view documents written in different locales using UTF-8.
Please note that applications such as KDE and Open Office may use additional files for internationalization.
2.1. Adding language support during installation
During your installation, the installation language you select becomes your default language after installation. The figure below illustrates the language selection window during installation. The selected language affects the default for:
user interface,
documentation,
fonts,
date, time formats and locale information,
input methods for Asian languages.
These areas will be discussed later in this guide.
During installation you can also install support for multiple languages from the package selection window as illustrated below.
2.2. Adding language support after installation
After installation, you can still add, remove and change supported languages using the Package Manager. The Package Manager can be accessed from the system menu by clicking => . In the first tab you can view the application categories among which is “Languages” from which you can select the languages you wish to support. Please select only the languages you wish to use as this can save you a significant amount of disk space. The language selection feature in the Package Manager is illustrated below. Some languages have optional packages which you can select and install.
Chapter 3. Changing the default language
You can set your default language during the installation process of Red Hat Enterprise Linux 5 which also specifies your locale settings. To change the default language you do not need to restart or reinstall Red Hat Enterprise Linux 5. You can do this as root by running the language selection application. This can be accessed from the system menu by clicking => => or typing system-config-language from a terminal. This displays a list of supported languages from which you can select your preference. Clicking on the OK button sets the selected language as default. The figure below illustrates the language selection application.
On selecting your default language, it is recommended to logout of your system in order to reload the language settings including the user interface, characters, input tables and methods.
You can also change the language used on your desktop from the GDM language menu before logging in to your desktop.
Chapter 4. Keyboard installation and configuration
During installation the keyboard you select becomes your default keyboard. You can change your default keyboard after installation or add multiple keyboards which you can change on the fly to suit your input language. The figure below illustrates the keyboard selection menu during the installation process.
4.1. Configuring the keyboard after installation
After installation, you can set the default keyboard by clicking => => from the system menu panel or by typing system-config-keyboard from a terminal. This displays a list of supported keyboard from which you can select the appropriate keyboard for your system. The figure below illustrates the Keyboard Selection utility.
Chapter 5. Red Hat Enterprise Linux 5 System Documentation
Based on your selected language, the system documentation available for Red Hat Enterprise Linux 5 will be in the respective language if this is supported. The figure below illustrates optional packages listed in the Package Manager. Among the optional packages for supported languages, will be documentation in the selected language. In the figure below, the Deployment Guide is listed among the Packages available in Japanese language support.
For an updated list of available documentation for your language, please visit
The Red Hat documentation Page and select a product from the list of available products. Please note that the content of this web site may vary as the site gets updated regularly.
The figure below illustrates the language selection page for Red Hat Enterprise Linux. From the list of languages, select your preferred language and click on the Go button to display an up to date list of available documents for your language. You can also select the preferred format for the document you wish to view or download.
By default installing support for an internationalized language in Red Hat Enterprise Linux 5 also installs the required fonts for the selected language.
Table 2.1, “Red Hat Enterprise Linux 5 International Languages” summarizes a list of the fonts installed for supported languages. This chapter also explains how to install additional fonts.
A common sign that proper fonts for a particular language are not installed is characters appear as boxes with numbers. This is the unicode box which indicates that the fonts required to display the text are missing. The figure below illustrates an example.
Please ensure that you have the correct language support packages installed for your language to display content correctly.
Red Hat Enterprise Linux uses two subsystems to manage and display fonts on the Desktop: Fontconfig and the core X Fonts system. The newer Fontconfig font subsystem simplifies font management and provides advanced display features, such as anti-aliasing. This system is used automatically for modern applications developed using the (Qt 3) or (GTK+ 2) graphical toolkits. For backward compatibility with older legacy X applications, Red Hat Enterprise Linux includes the original font subsystem, called the Core X Font subsystem. This system is provided through the X Font Server (xfs). The xfs service manages the look and scalability of older fonts within some X applications. Legacy fonts will be discussed later in this chapter.
By default, the xfs service is configured to run by default in runlevels 2, 3, 4 and 5 and can be managed using initscript utilities such as chkconfig and the Services Configuration Tool (system-config-services). The X Window System requires the xfs service in order to run.
6.1. Adding new fonts for a user
To add fonts for an individual user, copy the new fonts into the ~/.fonts/ directory in the user's home directory. Use the fc-cache command to update the font information cache, as in the following example:
fc-cache ~/.fonts/
More options on using the fc-cache can be obtained from the fc-cache man page:
man fc-cache
Another easier method to add fonts is as follows:
Double-click on the "Computer" icon on your desktop.
In the "File" menu, choose "Open Location..."
Type in: fonts://
When the fonts window appears, drag and drop the fonts to be installed into this window.
The new fonts you install should be usable by most GNOME applications. Some applications may have to be restarted to use the newly added fonts.
6.2. Adding new fonts for all users
To install fonts for all users you need to login as root and create a directory under
/usr/share/fonts/ for example
/usr/share/fonts/custom. Copy the fonts you wish to add into the directory you created and run:
fc-cache -f /usr/share/fonts/
All existing and new users should now be able to use the installed fonts.
6.3. Working with legacy fonts
The X server looks for a font server specified in the FontPath directive within the Files section of the /etc/X11/xorg.conf configuration file.
The X server connects to the xfs server on a specified port to acquire font information. For this reason, the xfs service must be running for X to start.
6.3.1. Adding Fonts to xfs
To add fonts to the core X font subsystem (xfs), follow these steps:
If it does not already exist, create a directory called /usr/share/fonts/local/ using the following command as root:
mkdir /usr/share/fonts/local/
If creating the /usr/share/fonts/local/ directory is necessary, it must be added to the xfs path using the following command as root:
chkfontpath --add /usr/share/fonts/local/
Copy the new font file into the /usr/share/fonts/local/ directory
Update the font information by issuing the following command as root:
ttmkfdir -d /usr/share/fonts/local/ -o /usr/share/fonts/local/fonts.scale
Reload the xfs font server configuration file by issuing the following command as root:
service xfs reload
Chapter 8. Writing Asian and Indic Languages
Please ensure that your preferred language is installed from the list of supported languages before attempting to change your input method. Please also ensure that you have configured a suitable keyboard for your selected language. The following are examples on how to write in specific languages.
8.1. How to write in Japanese
Start the application you wish to write in and press the CTRL and SPACE keys to start or stop SCIM. If using a Japanese keyboard, you can also start and stop SCIM by pressing the Zenkaku-Hankaku key. When started a SCIM tool bar will be displayed on the right corner of your screen as illustrated below.
If Anthy is not displayed, click on the displayed input method and select Japanese from the list of languages displayed. If Japanese is not listed, this is an indication that you have not added Japanese language support in your system. For more information on adding language support, please read
Section 2.2, “Adding language support after installation”.
On selecting Japanese as your input language, you can start typing. You can press the SPACE key to start Kanji conversion. If you press the SPACE key a second time, a look up window will be displayed as you type your phrases with suggestions which you can select from. To navigate through the list of candidate phrases, you may use the UP and DOWN arrow keys or the SPACE bar. Use the RETURN key to commit your selection to the document.
The input mode button allows you to select your input mode. If using a Japanese keyboard, you can convert between Hiragana and Katanaka by pressing the Hiragana-Katakana key. You can also convert input to Hiragana by pressing the F6 key. To convert to Katanaka press the F7 key. Other input modes available are Half Width Katanaka, Latin and Wide Latin. You can switch to Half-Width Katakana using the F8 key and to Wide Latin using the F9 key. The figure below illustrates the input mode options.
You can also set the conversion mode for your typing to Multi Segment and Single Segment. You can also set your phrases to be converted as you type in either Multi or Single Segments. The figure below illustrates the conversion mode options.
If you wish to add a word to the dictionary, you can do so by clicking on the dictionary icon on the SCIM toolbar. The dictionary tool allows you to add, edit or remove dictionary words. The figure below illustrates the dictionary options available. On clicking the preferred option, you may be required to select your input method by pressing CTRL and SPACE keys and selecting your input method as the dictionary icon executes an application called kasumi which you can also execute from a terminal.
For more shortcuts and descriptions of the input method options, click on the help icon on the SCIM toolbar.
8.2. How to write in Chinese
Please note that Red Hat Enterprise Linux 5 supports the Chewing input method for traditional Chinese and Smart-Pinyin for simplified Chinese.
8.2.1. Writing in Simplified Chinese with Smart Pinyin
To write in Simplified Chinese with Smart Pinyin, start the application you wish to write in and press CTRL and SPACE keys simultaneously to display the SCIM toolbar. Click on the language toolbar and select Chinese (simplified) and Smart Pinyin from the list of languages displayed. If Chinese is not displayed, this is an indication that you have not added Chinese language support in your system. For more information on adding language support, please read
Section 2.2, “Adding language support after installation”.
On selecting Smart Pinyin, you can then start typing. A look up window will be displayed as you type your words with suggestions which you can select from. Press the number keys to select your preferred phrase and the SPACE key to add it to your document. For more shortcuts and descriptions of the input method options, click on the SCIM help icon on the toolbar.
8.2.2. Writing in Traditional Chinese with Chewing
Start the application you wish to write in and press CTRL and SPACE simultaneously to start SCIM. The SCIM tool bar will be displayed on the bottom right corner of your screen from which you can select your desired input method. To write with Chewing, select Chinese (traditional) from the list of languages displayed and select Chewing. If Chinese is not displayed, this is an indication that you have not added Chinese language support in your system. For more information on adding language support, please read
Section 2.2, “Adding language support after installation”. You can then start typing using your desired input method. If you press space, a look up window will be displayed with suggested phrases which you can select from.
Press the <number> key to select your preferred phrase (where <number> is the number of the word from the list displayed). Press the RETURN key on your keyboard to select the selected phrase and add it to your document.
For more shortcuts and descriptions of the input method options click on the SCIM help icon on the toolbar.
8.3. How to write in Korean
Start the application you wish to write in and press CTRL and SPACE keys simultaneously to start or stop SCIM. When started, the SCIM tool bar will be displayed on the right corner of your screen.
Using your mouse, click on the displayed input method if 'Hangul' is not displayed and select Korean from the list of languages displayed. The scim toolbar will display 'Hangul' when Korean is selected as illustrated below. You can then start typing.
You can also switch between Latin (abc..) and Hangul input by clicking on the input mode button as illustrated below.
The input layout button allows you to select your preferred input layout.
You can use the F9 key to convert input to Hanja characters. Pressing on the SCIM Help icon in the toolbar displays a summary of the shortcuts and their usage.
8.4. How to write in Indic Languages
Most Indic languages have 3 types of keymaps, namely:
Inscript - This keymap is defined according to the Government standards.
Phonetic - A phonetic keymap has keys mapped according to the sound of the alphabet. For example, for Hindi, "क" is mapped to "k"
Itrans - An Itrans keymap is similar to phonetic - but has all the combined half characters (halants) mapped separately. There are no halants in Itrans.
Other keymaps are language dependant. For example, many languages have:
Typewriter - A keymap which functions like an actual typewriter
Language specific - Popular keymaps from the community - KGP for Kannada, Tamil99 for Tamil, etc.
To write in an Indic language perform the following:
Start the application you wish to write in and press CTRL and SPACE keys simultaneously to start SCIM. A SCIM toolbar will be displayed on the right corner of your screen from which you can select your desired language as illustrated in
Figure 8.10, “SCIM Toolbar - Indic”. Please note that your default language may vary depending on your language settings. To stop SCIM, press the CTRL and SPACE keys simultaneously again.
To change your language, click on the displayed language or keymap and select your language and type of keymap from the list of languages displayed as illustrated in figure
Figure 7.2, “SCIM language menu”. You can now start typing in your selected language. Please note that your language menu may vary depending on your language settings.
To access help for a particular keymap, select the keymap and click on the Help icon on the SCIM toolbar. This will pop-up a dialog box, displaying the help associated with the current keymap.
Chapter 9. Advanced Topics
9.1. Using the iconv tool
The iconv tool converts the encoding of characters in a file from one coded character set to another. The result is written to standard output unless otherwise specified by the --output option. When doing conversions it is always a good idea to backup ones original files first.
The following are some useful examples of using the
iconv tool.
List character-set encoding names:
iconv --list
Convert ISO8859-1 (legacy Western European) content to utf-8
iconv -f ISO_8859-1 -t UTF-8 oldfile > newfile
In the above example, the oldfile is encoded in ISO8859-1, while the "newfile" will be encoded in UTF-8.
Similarly to convert EUCJP content to UTF-8
iconv -f EUCJP -t UTF-8 oldfile > newfile
See the iconv (1) manpage for more details.
9.2. Using the convmv tool
The convmv is a tool for converting the character-set encoding of file names. It is particularly useful for converting file names encoded in a legacy charset encoding such as ISO-8859 to UTF-8, or EUC to UTF-8. Please ensure you install the
convmv package to use this tool. The following are examples of options available using the
convmv tool.
List character-set encoding names:
convmv --l
convmv runs in test mode by default, one needs to use the
--notest option for the changes to be actually effected.
Convert ISO8859-1 (legacy Western European) filenames in directory DIR to UTF-8
convmv -f iso-8859-1 -t utf8 DIR
Similarly, convert EUCJP filenames in DIR to UTF-8
convmv -f euc-jp -t utf8 DIR
See the convmv (1) manpage for more details.
Chapter 10. Language support in shipped applications
Some applications shipped with Red Hat Enterprise Linux 5 support multiple languages. This section discusses some of these applications.
10.1. Language support in Firefox
Firefox is the default web browser in RHEL5. Firefox allows you to browse web pages in many languages. An upto date list of languages supported in the latest release of Firefox can be found on
http://www.mozilla.com/en-US/firefox/all.html.
Web pages you access may be available in more than one language. To display pages in your preferred language, please set your preferred language order by selecting from the Firefox menu > > icon > tab and section. Click on the Choose button to add or edit your preferred languages list. The Languages window will be displayed listing the order of preference for languages you wish to display content in. Click on the list to display a list of languages supported by your version of Firefox. Languages not listed are not supported. Click on the Add button to add the selected language. You may then move your preferred languages up or down the list of preferred languages. You can also remove a language from the list of prefer ed languages by selecting it and clicking on the Remove button. When done click on the OK button to save your changes or Cancel to cancel the operation.
More documentation on the firefox web browser can be found by clicking on the menu item and selecting or by pressing the key on your keyboard while the Firefox browser window is active.
10.2. Language support in Evolution
Evolution is a communications tool that helps you manage your emails, address book, tasks and multiple calendars.
If you wish to write an email in a supported preferred language, open a mail composition window for a new mail or click on reply or forward for an existing email. To change the encoding of your mail, select > and choose the language encoding that you wish to send the message in. You can set the default encoding for messages you receive and send by selecting in the main window > , then select the or sections. These contain a list from which you can select your preferred character encoding. If you are unsure which encoding to use, select UTF-8, which offers the greatest range of character displays for the greatest range of languages.
More information on Language support for Evolution can be found on the application's documentation which can be obtained by pressing F1 while the application window is active. You can also click on the menu item and selecting from the list of options.
10.3. Language support in gedit
gedit is the official text editor used in the GNOME desktop. gedit also provides support for syntax highlighting for various programming languages including C, C++, Java, HTML, XML, Python, Perl among others.
When opening a file (from the menu > ), you can specify the character encoding for a file under the section in the Open File window. By default gedit can also auto detect the character encoding.
When saving a file (from the menu > ) you can also specify the character encoding to use for the file in the section of the "Save As" window. On selecting the preferred character encoding, click on the
Save button. More information on using
gedit including latest updates can be obtained on
http://www.gedit.org.
This section outlines the Indic language keyboard layouts supported by Red Hat Enterprise Linux 5.
The following illustrations are for inscript keyboards for Indic Languages.
