- BZ#659076
Previously, dracut incorrectly displayed that it loaded SELinux even if SELinux was disabled in the config file and "selinux=0" was not specified on the kernel command line. As a consequence, an error message could confuse the user when booting the system. With this update, the dracut utility is modified and the error message no longer appears.
- BZ#696980
Due to an error in the dracut module script, the system could fail to find the root volume if a static IP address was specified. As a consequence, the system did not boot. With this update, the error is corrected, and the system is able to boot with a static IP address.
- BZ#698160
When mounting the root device over the NFS (Network File System) protocol, the /var/lib/rpcbind directory created by initramfs was world-writable. The dracut tool has been modified to generate initramfs which now sets the ownership to the rpc user and the group.
- BZ#698165
When auto-assembling an md RAID device, initramfs used an invalid parameter when calling the mdadm tool. This prevented the system from booting if the root device was on the RAID device. The invalid parameter has been removed and the system now boots properly.
- BZ#698215
When auto-assembling an md RAID device, an error in the mdraid_start.sh script prevented the system from booting if the root device was on the RAID device. The error in the script has been fixed and the system now boots correctly.
- BZ#701309
Prior to this update, the /var/lib/nfs/prc_pipefs partition could not be accessed on system boot. The problem occurred when booting the system with NFS set as the root partition with at least one separate /var partition. This was caused by initramfs mounting the /var partition over the existing rpc_pipefs partition. The initramfs file system now mounts entries in /etc/fstab.sys, which fixes the problem.
- BZ#707609
The dm-mod and dm-crypt kernel modules were missing from the list of kernel modules, which are pre-loaded for the FIPS-140 check. These modules have been added to the list with this update.
- BZ#712254
When loading SELinux from inside initramfs, the output of the SELinux commands could be garbled if the user used non-Latin locales. The initramfs file system has been modified to turn off localization for the SElinux commands, which results in readable messages.
- BZ#737134
The QLogic qla4xxx iSCSI driver and the iSCSI (Internet Small Computer System Interface) transport layer now support iSCSI boot from Storage Area Network (SAN) using the iscsistart. With this update, dracut is modified to support these changes.
- BZ#737593
If the user installed a system with rootfs on a RAID device where RAID members were encrypted, dracut failed to assemble the RAID device on reboot. As a consequence, the system did not boot. A patch has been applied to address this issue, and the RAID device is now assembled on every boot so that the system boots successfully.
- BZ#741430
When applying SELinux labels for /dev in initramfs, the restorecon tool did not alter the MCS/MLS label only types. To fix this problem, the "-F" option has been added to all calls of restorecon.
- BZ#742920
Prior to this update, the boot process timed out for network settings with DHCP involved. A patch has been applied to extend the timeout interval if DHCP is involved, which fixes the problem.
