Red Hat Summit Red Hat SummitSupportKonsoleEntwicklerDemo startenKontakt

Dieser Inhalt ist in der von Ihnen ausgewählten Sprache nicht verfügbar.

Using Go 1.17.7 Toolset

Red Hat Developer Tools 1

Installing and using Go 1.17.7 Toolset

Eva-Lotte Gebhardt

Olga Tikhomirova

Peter Macko

Kevin Owen

Vladimir Slavik

Red Hat Developer Group Documentation Team

Zuzana Zoubkova

Abstract

Go Toolset is a Red Hat offering for developers on the Red Hat Enterprise Linux (RHEL) operating system. Use this guide for an overview of Go Toolset, to learn how to invoke and use different versions of Go tools, and to find resources with more in-depth information.

Making open source more inclusive
Link kopieren

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. We are beginning with these four terms: master, slave, blacklist, and whitelist. Because of the enormity of this endeavor, these changes will be implemented gradually over several upcoming releases. For more details, see our CTO Chris Wright’s message.

Chapter 1. Go Toolset
Link kopieren

Go Toolset is a Red Hat offering for developers on Red Hat Enterprise Linux (RHEL). It provides the Go programming language tools and libraries. Note that Go is alternatively known as golang.

Go Toolset is distributed as a part of Red Hat Developer Tools for Red Hat Enterprise Linux 7. Go Toolset is available as a module for Red Hat Enterprise Linux 8. Go Toolset is available as packages for Red Hat Enterprise Linux 9.

1.1. Go Toolset components
Link kopieren

The following components are available as a part of Go Toolset:

Expand
NameVersionDescription

golang

RHEL 7 — 1.17.7, RHEL 8 — 1.17.7, RHEL 9 — 1.17.7

A Go compiler.

delve

RHEL 7 — 1.7.0, RHEL 8 — 1.7.0, RHEL 9 — 1.7.0

A Go debugger.

1.2. Go Toolset compatibility
Link kopieren

Go Toolset is available for Red Hat Enterprise Linux 7 and Red Hat Enterprise Linux 8 and Red Hat Enterprise Linux 9 on the following architectures:

  • AMD and Intel 64-bit
  • 64-bit ARM (RHEL 8 and RHEL 9)
  • IBM Power Systems, Little Endian
  • 64-bit IBM Z

1.3. Getting access to Go Toolset on Red Hat Enterprise Linux 7
Link kopieren

To be able to install Go Toolset on Red Hat Enterprise Linux 7, you must access and enable Red Hat Developer Tools and Red Hat Software Collections repositories.
If these repositories are already attached to your system, see Installing Go Toolset.

Procedure

  1. Install Wget by running: 

    # yum install wget
    Copy to Clipboard Toggle word wrap

  2. Download the latest subscription data by running: 

    # subscription-manager refresh
    Copy to Clipboard Toggle word wrap

  3. Register your system by running: 

    # subscription-manager register
    Copy to Clipboard Toggle word wrap

    To register your system using a graphical user interface (GUI), follow the Registering and Unregistering a System guide.

  4. Display a list of all available subscriptions and identify the pool ID by running: 

    # subscription-manager list --available
    Copy to Clipboard Toggle word wrap
  5. Find the pool ID on the line beginning with Pool ID.

  6. Attach the subscription that provides access to the Red Hat Developer Tools repository to your system by running: 

    # subscription-manager attach --pool=<pool ID from the subscription>
    Copy to Clipboard Toggle word wrap
    • Replace <pool ID from the subscription> with the pool ID you identified in the previous step.

  7. Verify which subscriptions are attached to your system by running: 

    # sudo subscription-manager list --consumed
    Copy to Clipboard Toggle word wrap

  8. Enable the rhel-7-variant-devtools-rpms repository by running: 

    # subscription-manager repos --enable rhel-7-<variant>-devtools-rpms
    Copy to Clipboard Toggle word wrap

    • Replace <variant> with your Red Hat Enterprise Linux system variant: server or workstation.

      Use server to access the widest range of development tools.

  9. Enable the rhel-variant-rhscl-7-rpms repository by running: 

    # subscription-manager repos --enable rhel-<variant>-rhscl-7-rpms
    Copy to Clipboard Toggle word wrap
    • Replace <variant> with your Red Hat Enterprise Linux system variant: server or workstation.

  10. Add the Red Hat Developer Tools GPG key to your system by running: 

    # cd /etc/pki/rpm-gpg
# wget -O RPM-GPG-KEY-redhat-devel https://www.redhat.com/security/data/a5787476.txt
# rpm --import RPM-GPG-KEY-redhat-devel
    Copy to Clipboard Toggle word wrap

1.4. Installing Go Toolset
Link kopieren

Complete the following steps to install Go Toolset, including all dependent packages.

Prerequisites

Procedure

On Red Hat Enterprise Linux 7, install the go-toolset-1.17 collection by running: 

# yum install go-toolset-1.17
Copy to Clipboard Toggle word wrap

On Red Hat Enterprise Linux 8, install the go-toolset module by running: 

# yum module install go-toolset
Copy to Clipboard Toggle word wrap

On Red Hat Enterprise Linux 9, install the go-toolset package by running: 

# dnf install go-toolset
Copy to Clipboard Toggle word wrap

1.5. Installing Go documentation
Link kopieren

You can install documentation for the Go programming language on your local system.

Prerequisites

Procedure

To install the golang-docs package, run the following command:

  • On Red Hat Enterprise Linux 7: 

    # yum install go-toolset-1.17-golang-docs
    Copy to Clipboard Toggle word wrap

    You can find the documentation under the following path: /opt/rh/go-toolset-1.17/root/usr/lib/go-toolset-1.17-golang/doc/docs.html.

  • On Red Hat Enterprise Linux 8: 

    # yum install golang-docs
    Copy to Clipboard Toggle word wrap

    You can find the documentation under the following path: /usr/lib/golang/doc/effective_go.html.

  • On Red Hat Enterprise Linux 9: 

    # dnf install golang-docs
    Copy to Clipboard Toggle word wrap

    You can find the documentation under the following path: /usr/lib/golang/doc/go_spec.html.

Chapter 2. The Go compiler
Link kopieren

The Go compiler is a build tool and dependency manager for the Go programming language. It offers error checking and optimization of your code.

2.1. Prerequisites
Link kopieren

2.2. Setting up a Go workspace
Link kopieren

To compile a Go program, you need to set up a Go workspace.

Procedure

  1. Create a workspace directory as a subdirectory of $GOPATH/src.

    A common choice is $HOME/go.

  2. Place your source files into your workspace directory.

  3. Set the location of your workspace directory as an environment variable to the $HOME/.bashrc file by running: 

    $ echo 'export GOPATH=<workspace_dir>' >> $HOME/.bashrc
$ source $HOME/.bashrc
    Copy to Clipboard Toggle word wrap

    Replace <workspace_dir> with the name of your workspace directory.

2.3. Compiling a Go program
Link kopieren

You can compile your Go program using the Go compiler. The Go compiler creates an executable binary file as a result of compiling.

Prerequisites

Procedure

In your project directory, run:

  • On Red Hat Enterprise Linux 7: 

    $ scl enable go-toolset-1.17 'go build <output_file>'
    Copy to Clipboard Toggle word wrap
    • Replace <output_file< with the desired name of your output file and <go_main_package> with the name of your main package.

  • On Red Hat Enterprise Linux 8: 

    $ go build <output_file>
    Copy to Clipboard Toggle word wrap
    • Replace <output_file> with the desired name of your output file and <go_main_package> with the name of your main package.

  • On Red Hat Enterprise Linux 9: 

    $ go build <output_file>
    Copy to Clipboard Toggle word wrap
    • Replace <output_file> with the desired name of your output file and <go_main_package> with the name of your main package.

2.4. Running a Go program
Link kopieren

The Go compiler creates an executable binary file as a result of compiling. Complete the following steps to execute this file and run your program.

Prerequisites

Procedure

To run your program, run in the directory containing the executable file: 

$ ./<file_name>
Copy to Clipboard Toggle word wrap
  • Replace <file_name> with the name of your executable file.

2.5. Installing compiled Go projects
Link kopieren

You can install already compiled Go projects to use their executable files and libraries in further Go projects. After installation, the executable files and libraries of the project are copied to according directories in the Go workspace. Its dependencies are installed as well.

Prerequisites

Procedure

To install a Go project, run:

  • On Red Hat Enterprise Linux 7: 

    $ scl enable go-toolset-1.17 'go install <go_project>'
    Copy to Clipboard Toggle word wrap
    • Replace <go_project> with the name of the Go project you want to install.

  • On Red Hat Enterprise Linux 8: 

    $ go install <go_project>
    Copy to Clipboard Toggle word wrap
    • Replace <go_project> with the name of the Go project you want to install.

  • On Red Hat Enterprise Linux 9: 

    $ go install <go_project>
    Copy to Clipboard Toggle word wrap
    • Replace <go_project> with the name of the Go project you want to install.

2.6. Downloading and installing Go projects
Link kopieren

You can download and install third-party Go projects from online resources to use their executable files and libraries in further Go projects. After installation, the executable files and libraries of the project are copied to according directories in the Go workspace. Its dependencies are installed as well.

Prerequisites

Procedure

  • To download and install a Go project, run:

    • On Red Hat Enterprise Linux 7: 

      $ scl enable go-toolset-1.17 'go get <third_party_go_project>'
      Copy to Clipboard Toggle word wrap
      • Replace <third_party_go_project> with the name of the project you want to download.

    • On Red Hat Enterprise Linux 8: 

      $ go get <third_party_go_project>
      Copy to Clipboard Toggle word wrap
      • Replace <third_party_go_project> with the name of the project you want to download.

    • On Red Hat Enterprise Linux 9: 

      $ go get <third_party_go_project>
      Copy to Clipboard Toggle word wrap
      • Replace <third_party_go_project> with the name of the project you want to download.

  • For information on possible values of third-party projects, run:

    • On Red Hat Enterprise Linux 7: 

      $ scl enable go-toolset-1.17 'go help importpath'
      Copy to Clipboard Toggle word wrap

    • On Red Hat Enterprise Linux 8: 

      $ go help importpath
      Copy to Clipboard Toggle word wrap

    • On Red Hat Enterprise Linux 9: 

      $ go help importpath
      Copy to Clipboard Toggle word wrap

Chapter 3. The gofmt formatting tool
Link kopieren

Instead of a style guide, the Go programming language uses the gofmt code formatting tool. gofmt automatically formats your code according to the Go layout rules.

3.1. Prerequisites
Link kopieren

3.2. Formatting code
Link kopieren

You can use the gofmt formatting tool to format code in a given path. When the path leads to a single file, the changes apply only to the file. When the path leads to a directory, all .go files in the directory are processed.

Procedure

To format your code in a given path, run:

  • On Red Hat Enterprise Linux 7: 

    $ scl enable go-toolset-1.17 'gofmt -w <code_path>'
    Copy to Clipboard Toggle word wrap
    • Replace <code_path> with the path to the code you want to format.

  • On Red Hat Enterprise Linux 8: 

    $ gofmt -w <code_path>
    Copy to Clipboard Toggle word wrap
    • Replace <code_path> with the path to the code you want to format.

  • On Red Hat Enterprise Linux 9: 

    $ gofmt -w <code_path>
    Copy to Clipboard Toggle word wrap
    • Replace <code_path> with the path to the code you want to format.
Note

To print the formatted code to standard output instead of writing it to the original file, omit the -w option.

3.3. Previewing changes to code
Link kopieren

You can use the gofmt formatting tool to preview changes done by formatting code in a given path. The output in unified diff format is printed to standard output.

Procedure

To show differences in your code in a given path, run:

  • On Red Hat Enterprise Linux 7: 

    $ scl enable go-toolset-1.17 'gofmt -d <code_path>'
    Copy to Clipboard Toggle word wrap
    • Replace <code_path> with the path to the code you want to compare.

  • On Red Hat Enterprise Linux 8: 

    $ gofmt -d <code_path>
    Copy to Clipboard Toggle word wrap
    • Replace <code_path> with the path to the code you want to compare.

  • On Red Hat Enterprise Linux 9: 

    $ gofmt -d <code_path>
    Copy to Clipboard Toggle word wrap
    • Replace <code_path> with the path to the code you want to compare.

3.4. Simplifying code
Link kopieren

You can use the gofmt formatting tool to simplify your code.

Procedure

  • To simplify code in a given path, run:

    • On Red Hat Enterprise Linux 7: 

      $ scl enable go-toolset-1.17 'gofmt -s <code_path>'
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to simplify.

    • On Red Hat Enterprise Linux 8: 

      $ gofmt -s <code_path>
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to simplify.

    • On Red Hat Enterprise Linux 9: 

      $ gofmt -s <code_path>
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to simplify.

  • To apply the changes, run:

    • On Red Hat Enterprise Linux 7: 

      $ scl enable go-toolset-1.17 'gofmt -w <code_path>'
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to format.

    • On Red Hat Enterprise Linux 8: 

      $ gofmt -w <code_path>
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to format.

    • On Red Hat Enterprise Linux 9: 

      $ gofmt -w <code_path>
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to format.

3.5. Refactoring code
Link kopieren

You can use the gofmt formatting tool to refactor your code by applying arbitrary substitutions.

Procedure

  • To refactor your code in a given path, run:

    • On Red Hat Enterprise Linux 7: 

      $ scl enable go-toolset-1.17 'gofmt -r <rewrite_rule> <code_path>'
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to refactor and <rewrite_rule> with the rule you want it to be rewritten by.

    • On Red Hat Enterprise Linux 8: 

      $ gofmt -r <rewrite_rule> <code_path>
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to refactor and <rewrite_rule> with the rule you want it to be rewritten by.

    • On Red Hat Enterprise Linux 9: 

      $ gofmt -r <rewrite_rule> <code_path>
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to refactor and <rewrite_rule> with the rule you want it to be rewritten by.

  • To apply the changes, run:

    • On Red Hat Enterprise Linux 7: 

      $ scl enable go-toolset-1.17 'gofmt -w <code_path>'
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to format.

    • On Red Hat Enterprise Linux 8: 

      $ gofmt -w <code_path>
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to format.

    • On Red Hat Enterprise Linux 9: 

      $ gofmt -w <code_path>
      Copy to Clipboard Toggle word wrap
      • Replace <code_path> with the path to the code you want to format.

Chapter 4. The Go race detector
Link kopieren

Go Toolset includes the Go race detector, which is a tool of the Go standard library for finding race conditions.
Note that the race detector has a significant runtime resource overhead.

4.1. Prerequisites
Link kopieren

4.2. Using the Go race detector
Link kopieren

Use the Go race detector to check your code for race conditions.

Procedure

To use the race detector, run:

  • On Red Hat Enterprise Linux 7: 

    $ scl enable go-toolset-1.17 'go build -race -o <output_file> <go_main_package>'
    Copy to Clipboard Toggle word wrap
    • Replace <output_file> with the name of your executable file and <go_main_package> with the name of the package you want to test.

  • On Red Hat Enterprise Linux 8: 

    $ go build -race -o <output_file> <go_main_package>
    Copy to Clipboard Toggle word wrap
    • Replace <output_file> with the name of your executable file and <go_main_package> with the name of the package you want to test.

  • On Red Hat Enterprise Linux 9: 

    $ go build -race -o <output_file> <go_main_package>
    Copy to Clipboard Toggle word wrap
    • Replace <output_file> with the name of your executable file and <go_main_package> with the name of the package you want to test.

Chapter 5. Container images with Go Toolset
Link kopieren

You can build your own Go Toolset containers from either Red Hat Enterprise Linux container images or Red Hat Universal Base Images (UBI).

5.1. Red Hat Enterprise Linux Go Toolset container images contents
Link kopieren

The Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 8 and Red Hat Enterprise Linux 9 container images of Go Toolset contain the following packages:

Expand
ComponentVersionPackage

Go

1.17

RHEL 7 — go-toolset-1.17.7 RHEL 8 — go-toolset-1.17.7 RHEL 9 — go-toolset-1.17.7

5.2. Accessing Red Hat Enterprise Linux container images
Link kopieren

Pull the container image from the Red Hat registry before running your container and performing actions.

Procedure

To pull the required image, run:

  • For an image based on Red Hat Enterprise Linux 7: 

    # podman pull registry.redhat.io/devtools/go-toolset-rhel7
    Copy to Clipboard Toggle word wrap

  • For an image based on Red Hat Enterprise Linux 8: 

    # podman pull registry.redhat.io/rhel8/go-toolset
    Copy to Clipboard Toggle word wrap

  • For an image based on Red Hat Enterprise Linux 9: 

    # podman pull registry.redhat.io/rhel9/go-toolset
    Copy to Clipboard Toggle word wrap

5.3. Accessing the UBI Go Toolset container image on RHEL 8
Link kopieren

On RHEL 8, install the UBI Go Toolset container image to access Go Toolset.
Alternatively, you can install Go Toolset to the RHEL 8 base UBI container image. For further information, see Accessing Go Toolset from the base UBI container image on RHEL 8.

Procedure

To pull the UBI Go Toolset container image from the Red Hat registry, run: 

# podman pull registry.access.redhat.com/ubi8/go-toolset
Copy to Clipboard Toggle word wrap

5.4. Accessing Go Toolset from the base UBI container image on RHEL 8
Link kopieren

On RHEL 8, Go Toolset packages are part of the Red Hat Universal Base Images (UBIs) repositories, which means you can install Go Toolset as an addition to the base UBI container image. To keep the container image size small, install only individual packages instead of the entire Go Toolset.
Alternatively, you can install the UBI Go Toolset container image to access Go Toolset. For further information, see Accessing the UBI Go Toolset container image on RHEL 8.

Prerequisites

  • An existing Containerfile.
    For information on creating Containerfiles, see the Dockerfile reference page.

Procedure

  • To create a container image containing Go Toolset, add the following lines to your Containerfile: 
FROM registry.access.redhat.com/ubi8/ubi:latest

RUN yum module install -y go-toolset
Copy to Clipboard Toggle word wrap

  • To create a container image containing an individual package only, add the following lines to your Containerfile: 

    RUN yum install -y <package-name>
    Copy to Clipboard Toggle word wrap
    • Replace <package-name> with the name of the package you want to install.

You can use the Go Toolset container image as a Source-to-Image (S2I) builder image on Red Hat Enterprise Linux 7.

Procedure

  1. Set the IMPORT_URL variable to a URL specifying the location of your code.
  2. To build your S2I builder image, run the s2i build command.
Note

If the main package location is not identical with the location specified by the IMPORT_URL variable, set the INSTALL_URL variable to a URL that specifies the package location providing the application’s main executable file when built.

Chapter 6. Changes in Go Toolset
Link kopieren

Go Toolset has been updated from version 1.16 to 1.17.7 on RHEL 7 and on RHEL 8. RHEL 9 Beta is distributed with Go Toolset 1.17.7.

Notable changes include:

  • Added an option to convert slices to array pointers.
  • Added support for //go:build lines.
  • Improvements to function call performance on amd64.
  • Function arguments are formatted more clearly in stack traces.
  • Functions containing closures can be inlined.
  • Reduced resource consumption in x509 certificate parsing.
  • The Delve debugger has been rebased to 1.7.0 so that it supports Go Toolset 1.17.7 on RHEL 7 and RHEL 8, and Go Toolset 1.17.7 on RHEL 9.

Legal Notice
Link kopieren

Copyright © 2022 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.
Nach oben
Red Hat logoGithubredditYoutubeTwitter

Lernen

Testen, kaufen und verkaufen

Communitys

Über Red Hat Dokumentation

Wir helfen Red Hat Benutzern, mit unseren Produkten und Diensten innovativ zu sein und ihre Ziele zu erreichen – mit Inhalten, denen sie vertrauen können. Entdecken Sie unsere neuesten Updates.

Mehr Inklusion in Open Source

Red Hat hat sich verpflichtet, problematische Sprache in unserem Code, unserer Dokumentation und unseren Web-Eigenschaften zu ersetzen. Weitere Einzelheiten finden Sie in Red Hat Blog.

Über Red Hat

Wir liefern gehärtete Lösungen, die es Unternehmen leichter machen, plattform- und umgebungsübergreifend zu arbeiten, vom zentralen Rechenzentrum bis zum Netzwerkrand.

Theme

© 2025 Red Hat