Search

5.3. Converting physical machines to virtual machines

download PDF
By now you have prepared a conversion server and your chosen bootable media. Next you will boot the P2V client, connect to your conversion server, and convert your physical machine. The conversion process can take a long time, especially when large physical disks are being converted.

Procedure 5.1. Converting a physical machine to a virtual machine

  1. Boot the P2V client boot media on the conversion server.

    Boot the P2V client boot media on the conversion server that you created in preparation for your conversion. Because the P2V client is built on a Red Hat Enterprise Linux 6 live image, the Red Hat Enterprise Linux 6 splash image is displayed while the tool is booting.
  2. Configure networking if necessary.

    Generally, the P2V client configures networking automatically using DHCP. If it is unable to configure networking automatically, you will need to configure it manually. IP Address, Gateway, and Prefix are required fields. Enter values that are appropriate for your network, and click Use these network settings.
    Note, the P2V client does not support NIC teaming configurations for converting physical machines to virtual machines.
    Configure Networking.

    Figure 5.1. Network configuration on the P2V client

    Note

    To prevent automatic network configuration and configure your network manually, disconnect the physical machine from the network before booting.
  3. Connect to the conversion server.

    When networking is configured, you are prompted for connection details for the conversion server. These include Hostname (either host name or IP address), Username (this must be root), and Password. Enter these details and click Connect.
    Connect to conversion server.

    Figure 5.2. Connecting to the conversion server

  4. Configure the target virtual machine and select hardware to convert.

    After connecting to your conversion server, configure the virtual hardware that will be attached to the converted physical machine, and select the physical hardware to be converted.
    Enter the details for the outputted virtual machine.

    Figure 5.3. Configuring the virtual machine

    1. Configure the following under Target Properties:
      • Select a Destination Profile from the drop down menu. These reflect the target profiles included in the /etc/virt-v2v.conf file on the conversion server.
      • Enter a Name in Target Properties for the virtual machine that will result from the conversion.
      • The Number of CPUs and Memory(MB) in Target Properties are automatically detected and completed. Change these values if more CPUs or memory, or both, are desired on the outputted virtual machine.
    2. Under Fixed Storage, select one or more devices to convert. At least one Fixed Storage device must be converted, including the device containing the operating system installation.
    3. Under Removable Media, select one or more devices to convert.
    4. Under Network Interfaces, select one or more network interfaces to convert.
    5. Optional: If you wish to print debugging messages to a file, select the Enable server-side debugging check box. This instructs the server to write LIBGUESTFS_TRACE and LIBGUESTFS_DEBUG output during the conversion process.
      Note, the Enable server-side debugging check box is available only in Red Hat Enterprise Linux 6.5 and above. See Refer to Section 6.2, “Debugging P2V conversions” for more information on debugging P2V conversions.
    6. Click Convert.
      Conversion started.

      Figure 5.4. Conversion in process

When the conversion is complete, a success message is displayed. You can shut down the physical machine.
The screen reads "A guest has been successfully created on the target server. Remove the temporary boot device from this machine and press 'Power Off' to continue." A Power Off button appears below the text in this window.

Figure 5.5. Conversion successfully completed

You have converted your physical machine into a virtual machine. You can now import and run it on a hypervisor.
Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.