CLI tools

NAME                  READY   STATUS      RESTARTS   AGE     IP            NODE                           NOMINATED NODE
cakephp-ex-1-build    0/1     Completed   0          5m45s   10.131.0.10   ip-10-0-141-74.ec2.internal    <none>
cakephp-ex-1-deploy   0/1     Completed   0          3m44s   10.129.2.9    ip-10-0-147-65.ec2.internal    <none>
cakephp-ex-1-ktz97    1/1     Running     0          3m33s   10.128.2.11   ip-10-0-168-105.ec2.internal   <none>

NAME                  READY   STATUS      RESTARTS   AGE     IP            NODE                           NOMINATED NODE
cakephp-ex-1-build    0/1     Completed   0          5m45s   10.131.0.10   ip-10-0-141-74.ec2.internal    <none>
cakephp-ex-1-deploy   0/1     Completed   0          3m44s   10.129.2.9    ip-10-0-147-65.ec2.internal    <none>
cakephp-ex-1-ktz97    1/1     Running     0          3m33s   10.128.2.11   ip-10-0-168-105.ec2.internal   <none>

--> Scaling cakephp-ex-1 to 1
--> Success

--> Scaling cakephp-ex-1 to 1
--> Success

NAME                                  SHORTNAMES       APIGROUP                              NAMESPACED   KIND
bindings                                                                                     true         Binding
componentstatuses                     cs                                                     false        ComponentStatus
configmaps                            cm                                                     true         ConfigMap
...

NAME                                  SHORTNAMES       APIGROUP                              NAMESPACED   KIND
bindings                                                                                     true         Binding
componentstatuses                     cs                                                     false        ComponentStatus
configmaps                            cm                                                     true         ConfigMap
...

Update pod 'foo' with the annotation 'description' and the value 'my frontend'

  # Update pod 'foo' with the annotation 'description' and the value 'my frontend'
  # If the same annotation is set multiple times, only the last value will be applied
  oc annotate pods foo description='my frontend'

  # Update a pod identified by type and name in "pod.json"
  oc annotate -f pod.json description='my frontend'

  # Update pod 'foo' with the annotation 'description' and the value 'my frontend running nginx', overwriting any existing value
  oc annotate --overwrite pods foo description='my frontend running nginx'

  # Update all pods in the namespace
  oc annotate pods --all description='my frontend running nginx'

  # Update pod 'foo' only if the resource is unchanged from version 1
  oc annotate pods foo description='my frontend running nginx' --resource-version=1

  # Update pod 'foo' by removing an annotation named 'description' if it exists
  # Does not require the --overwrite flag
  oc annotate pods foo description-

Print the supported API resources

  # Print the supported API resources
  oc api-resources

  # Print the supported API resources with more information
  oc api-resources -o wide

  # Print the supported API resources sorted by a column
  oc api-resources --sort-by=name

  # Print the supported namespaced resources
  oc api-resources --namespaced=true

  # Print the supported non-namespaced resources
  oc api-resources --namespaced=false

  # Print the supported API resources with a specific APIGroup
  oc api-resources --api-group=rbac.authorization.k8s.io

Print the supported API versions

  # Print the supported API versions
  oc api-versions

Apply the configuration in pod.json to a pod

  # Apply the configuration in pod.json to a pod
  oc apply -f ./pod.json

  # Apply resources from a directory containing kustomization.yaml - e.g. dir/kustomization.yaml
  oc apply -k dir/

  # Apply the JSON passed into stdin to a pod
  cat pod.json | oc apply -f -

  # Apply the configuration from all files that end with '.json' - i.e. expand wildcard characters in file names
  oc apply -f '*.json'

  # Note: --prune is still in Alpha
  # Apply the configuration in manifest.yaml that matches label app=nginx and delete all other resources that are not in the file and match label app=nginx
  oc apply --prune -f manifest.yaml -l app=nginx

  # Apply the configuration in manifest.yaml and delete all the other config maps that are not in the file
  oc apply --prune -f manifest.yaml --all --prune-allowlist=core/v1/ConfigMap

Edit the last-applied-configuration annotations by type/name in YAML

  # Edit the last-applied-configuration annotations by type/name in YAML
  oc apply edit-last-applied deployment/nginx

  # Edit the last-applied-configuration annotations by file in JSON
  oc apply edit-last-applied -f deploy.yaml -o json

Set the last-applied-configuration of a resource to match the contents of a file

  # Set the last-applied-configuration of a resource to match the contents of a file
  oc apply set-last-applied -f deploy.yaml

  # Execute set-last-applied against each configuration file in a directory
  oc apply set-last-applied -f path/

  # Set the last-applied-configuration of a resource to match the contents of a file; will create the annotation if it does not already exist
  oc apply set-last-applied -f deploy.yaml --create-annotation=true

View the last-applied-configuration annotations by type/name in YAML

  # View the last-applied-configuration annotations by type/name in YAML
  oc apply view-last-applied deployment/nginx

  # View the last-applied-configuration annotations by file in JSON
  oc apply view-last-applied -f deploy.yaml -o json

Get output from running pod mypod; use the 'oc.kubernetes.io/default-container' annotation

  # Get output from running pod mypod; use the 'oc.kubernetes.io/default-container' annotation
  # for selecting the container to be attached or the first container in the pod will be chosen
  oc attach mypod

  # Get output from ruby-container from pod mypod
  oc attach mypod -c ruby-container

  # Switch to raw terminal mode; sends stdin to 'bash' in ruby-container from pod mypod
  # and sends stdout/stderr from 'bash' back to the client
  oc attach mypod -c ruby-container -i -t

  # Get output from the first pod of a replica set named nginx
  oc attach rs/nginx

Check to see if I can create pods in any namespace

  # Check to see if I can create pods in any namespace
  oc auth can-i create pods --all-namespaces

  # Check to see if I can list deployments in my current namespace
  oc auth can-i list deployments.apps

  # Check to see if I can do everything in my current namespace ("*" means all)
  oc auth can-i '*' '*'

  # Check to see if I can get the job named "bar" in namespace "foo"
  oc auth can-i list jobs.batch/bar -n foo

  # Check to see if I can read pod logs
  oc auth can-i get pods --subresource=log

  # Check to see if I can access the URL /logs/
  oc auth can-i get /logs/

  # List all allowed actions in namespace "foo"
  oc auth can-i --list --namespace=foo

Reconcile RBAC resources from a file

  # Reconcile RBAC resources from a file
  oc auth reconcile -f my-rbac-rules.yaml

Print the address of the control plane and cluster services

  # Print the address of the control plane and cluster services
  oc cluster-info

Dump current cluster state to stdout

  # Dump current cluster state to stdout
  oc cluster-info dump

  # Dump current cluster state to /path/to/cluster-state
  oc cluster-info dump --output-directory=/path/to/cluster-state

  # Dump all namespaces to stdout
  oc cluster-info dump --all-namespaces

  # Dump a set of namespaces to /path/to/cluster-state
  oc cluster-info dump --namespaces default,kube-system --output-directory=/path/to/cluster-state

Installing bash completion on macOS using homebrew

  # Installing bash completion on macOS using homebrew
  ## If running Bash 3.2 included with macOS
  brew install bash-completion
  ## or, if running Bash 4.1+
  brew install bash-completion@2
  ## If oc is installed via homebrew, this should start working immediately
  ## If you've installed via other means, you may need add the completion to your completion directory
  oc completion bash > $(brew --prefix)/etc/bash_completion.d/oc


  # Installing bash completion on Linux
  ## If bash-completion is not installed on Linux, install the 'bash-completion' package
  ## via your distribution's package manager.
  ## Load the oc completion code for bash into the current shell
  source <(oc completion bash)
  ## Write bash completion code to a file and source it from .bash_profile
  oc completion bash > ~/.kube/completion.bash.inc
  printf "
  # Kubectl shell completion
  source '$HOME/.kube/completion.bash.inc'
  " >> $HOME/.bash_profile
  source $HOME/.bash_profile

  # Load the oc completion code for zsh[1] into the current shell
  source <(oc completion zsh)
  # Set the oc completion code for zsh[1] to autoload on startup
  oc completion zsh > "${fpath[1]}/_oc"


  # Load the oc completion code for fish[2] into the current shell
  oc completion fish | source
  # To load completions for each session, execute once:
  oc completion fish > ~/.config/fish/completions/oc.fish

  # Load the oc completion code for powershell into the current shell
  oc completion powershell | Out-String | Invoke-Expression
  # Set oc completion code for powershell to run on startup
  ## Save completion code to a script and execute in the profile
  oc completion powershell > $HOME\.kube\completion.ps1
  Add-Content $PROFILE "$HOME\.kube\completion.ps1"
  ## Execute completion code in the profile
  Add-Content $PROFILE "if (Get-Command oc -ErrorAction SilentlyContinue) {
  oc completion powershell | Out-String | Invoke-Expression
  }"
  ## Add completion code directly to the $PROFILE script
  oc completion powershell >> $PROFILE

Display the current-context

  # Display the current-context
  oc config current-context

Delete the minikube cluster

  # Delete the minikube cluster
  oc config delete-cluster minikube

Delete the context for the minikube cluster

  # Delete the context for the minikube cluster
  oc config delete-context minikube

Delete the minikube user

  # Delete the minikube user
  oc config delete-user minikube

List the clusters that oc knows about

  # List the clusters that oc knows about
  oc config get-clusters

List all the contexts in your kubeconfig file

  # List all the contexts in your kubeconfig file
  oc config get-contexts

  # Describe one context in your kubeconfig file
  oc config get-contexts my-context

List the users that oc knows about

  # List the users that oc knows about
  oc config get-users

Rename the context 'old-name' to 'new-name' in your kubeconfig file

  # Rename the context 'old-name' to 'new-name' in your kubeconfig file
  oc config rename-context old-name new-name

Set the server field on the my-cluster cluster to https://1.2.3.4

  # Set the server field on the my-cluster cluster to https://1.2.3.4
  oc config set clusters.my-cluster.server https://1.2.3.4

  # Set the certificate-authority-data field on the my-cluster cluster
  oc config set clusters.my-cluster.certificate-authority-data $(echo "cert_data_here" | base64 -i -)

  # Set the cluster field in the my-context context to my-cluster
  oc config set contexts.my-context.cluster my-cluster

  # Set the client-key-data field in the cluster-admin user using --set-raw-bytes option
  oc config set users.cluster-admin.client-key-data cert_data_here --set-raw-bytes=true

Set only the server field on the e2e cluster entry without touching other values

  # Set only the server field on the e2e cluster entry without touching other values
  oc config set-cluster e2e --server=https://1.2.3.4

  # Embed certificate authority data for the e2e cluster entry
  oc config set-cluster e2e --embed-certs --certificate-authority=~/.kube/e2e/kubernetes.ca.crt

  # Disable cert checking for the e2e cluster entry
  oc config set-cluster e2e --insecure-skip-tls-verify=true

  # Set custom TLS server name to use for validation for the e2e cluster entry
  oc config set-cluster e2e --tls-server-name=my-cluster-name

  # Set proxy url for the e2e cluster entry
  oc config set-cluster e2e --proxy-url=https://1.2.3.4

Set the user field on the gce context entry without touching other values

  # Set the user field on the gce context entry without touching other values
  oc config set-context gce --user=cluster-admin

Set only the "client-key" field on the "cluster-admin"

  # Set only the "client-key" field on the "cluster-admin"
  # entry, without touching other values
  oc config set-credentials cluster-admin --client-key=~/.kube/admin.key

  # Set basic auth for the "cluster-admin" entry
  oc config set-credentials cluster-admin --username=admin --password=uXFGweU9l35qcif

  # Embed client certificate data in the "cluster-admin" entry
  oc config set-credentials cluster-admin --client-certificate=~/.kube/admin.crt --embed-certs=true

  # Enable the Google Compute Platform auth provider for the "cluster-admin" entry
  oc config set-credentials cluster-admin --auth-provider=gcp

  # Enable the OpenID Connect auth provider for the "cluster-admin" entry with additional args
  oc config set-credentials cluster-admin --auth-provider=oidc --auth-provider-arg=client-id=foo --auth-provider-arg=client-secret=bar

  # Remove the "client-secret" config value for the OpenID Connect auth provider for the "cluster-admin" entry
  oc config set-credentials cluster-admin --auth-provider=oidc --auth-provider-arg=client-secret-

  # Enable new exec auth plugin for the "cluster-admin" entry
  oc config set-credentials cluster-admin --exec-command=/path/to/the/executable --exec-api-version=client.authentication.k8s.io/v1beta1

  # Define new exec auth plugin args for the "cluster-admin" entry
  oc config set-credentials cluster-admin --exec-arg=arg1 --exec-arg=arg2

  # Create or update exec auth plugin environment variables for the "cluster-admin" entry
  oc config set-credentials cluster-admin --exec-env=key1=val1 --exec-env=key2=val2

  # Remove exec auth plugin environment variables for the "cluster-admin" entry
  oc config set-credentials cluster-admin --exec-env=var-to-remove-

Unset the current-context

  # Unset the current-context
  oc config unset current-context

  # Unset namespace in foo context
  oc config unset contexts.foo.namespace

Use the context for the minikube cluster

  # Use the context for the minikube cluster
  oc config use-context minikube

Show merged kubeconfig settings

  # Show merged kubeconfig settings
  oc config view

  # Show merged kubeconfig settings and raw certificate data and exposed secrets
  oc config view --raw

  # Get the password for the e2e user
  oc config view -o jsonpath='{.users[?(@.name == "e2e")].user.password}'

!!!Important Note!!!

  # !!!Important Note!!!
  # Requires that the 'tar' binary is present in your container
  # image.  If 'tar' is not present, 'oc cp' will fail.
  #
  # For advanced use cases, such as symlinks, wildcard expansion or
  # file mode preservation, consider using 'oc exec'.

  # Copy /tmp/foo local file to /tmp/bar in a remote pod in namespace <some-namespace>
  tar cf - /tmp/foo | oc exec -i -n <some-namespace> <some-pod> -- tar xf - -C /tmp/bar

  # Copy /tmp/foo from a remote pod to /tmp/bar locally
  oc exec -n <some-namespace> <some-pod> -- tar cf - /tmp/foo | tar xf - -C /tmp/bar

  # Copy /tmp/foo_dir local directory to /tmp/bar_dir in a remote pod in the default namespace
  oc cp /tmp/foo_dir <some-pod>:/tmp/bar_dir

  # Copy /tmp/foo local file to /tmp/bar in a remote pod in a specific container
  oc cp /tmp/foo <some-pod>:/tmp/bar -c <specific-container>

  # Copy /tmp/foo local file to /tmp/bar in a remote pod in namespace <some-namespace>
  oc cp /tmp/foo <some-namespace>/<some-pod>:/tmp/bar

  # Copy /tmp/foo from a remote pod to /tmp/bar locally
  oc cp <some-namespace>/<some-pod>:/tmp/foo /tmp/bar

Create a pod using the data in pod.json

  # Create a pod using the data in pod.json
  oc create -f ./pod.json

  # Create a pod based on the JSON passed into stdin
  cat pod.json | oc create -f -

  # Edit the data in registry.yaml in JSON then create the resource using the edited data
  oc create -f registry.yaml --edit -o json

Create a cluster role named "pod-reader" that allows user to perform "get", "watch" and "list" on pods

  # Create a cluster role named "pod-reader" that allows user to perform "get", "watch" and "list" on pods
  oc create clusterrole pod-reader --verb=get,list,watch --resource=pods

  # Create a cluster role named "pod-reader" with ResourceName specified
  oc create clusterrole pod-reader --verb=get --resource=pods --resource-name=readablepod --resource-name=anotherpod

  # Create a cluster role named "foo" with API Group specified
  oc create clusterrole foo --verb=get,list,watch --resource=rs.apps

  # Create a cluster role named "foo" with SubResource specified
  oc create clusterrole foo --verb=get,list,watch --resource=pods,pods/status

  # Create a cluster role name "foo" with NonResourceURL specified
  oc create clusterrole "foo" --verb=get --non-resource-url=/logs/*

  # Create a cluster role name "monitoring" with AggregationRule specified
  oc create clusterrole monitoring --aggregation-rule="rbac.example.com/aggregate-to-monitoring=true"

Create a cluster role binding for user1, user2, and group1 using the cluster-admin cluster role

  # Create a cluster role binding for user1, user2, and group1 using the cluster-admin cluster role
  oc create clusterrolebinding cluster-admin --clusterrole=cluster-admin --user=user1 --user=user2 --group=group1

Create a new config map named my-config based on folder bar

  # Create a new config map named my-config based on folder bar
  oc create configmap my-config --from-file=path/to/bar

  # Create a new config map named my-config with specified keys instead of file basenames on disk
  oc create configmap my-config --from-file=key1=/path/to/bar/file1.txt --from-file=key2=/path/to/bar/file2.txt

  # Create a new config map named my-config with key1=config1 and key2=config2
  oc create configmap my-config --from-literal=key1=config1 --from-literal=key2=config2

  # Create a new config map named my-config from the key=value pairs in the file
  oc create configmap my-config --from-file=path/to/bar

  # Create a new config map named my-config from an env file
  oc create configmap my-config --from-env-file=path/to/foo.env --from-env-file=path/to/bar.env

Create a cron job

  # Create a cron job
  oc create cronjob my-job --image=busybox --schedule="*/1 * * * *"

  # Create a cron job with a command
  oc create cronjob my-job --image=busybox --schedule="*/1 * * * *" -- date

Create a deployment named my-dep that runs the busybox image

  # Create a deployment named my-dep that runs the busybox image
  oc create deployment my-dep --image=busybox

  # Create a deployment with a command
  oc create deployment my-dep --image=busybox -- date

  # Create a deployment named my-dep that runs the nginx image with 3 replicas
  oc create deployment my-dep --image=nginx --replicas=3

  # Create a deployment named my-dep that runs the busybox image and expose port 5701
  oc create deployment my-dep --image=busybox --port=5701

Create a single ingress called 'simple' that directs requests to foo.com/bar to svc

  # Create a single ingress called 'simple' that directs requests to foo.com/bar to svc
  # svc1:8080 with a tls secret "my-cert"
  oc create ingress simple --rule="foo.com/bar=svc1:8080,tls=my-cert"

  # Create a catch all ingress of "/path" pointing to service svc:port and Ingress Class as "otheringress"
  oc create ingress catch-all --class=otheringress --rule="/path=svc:port"

  # Create an ingress with two annotations: ingress.annotation1 and ingress.annotations2
  oc create ingress annotated --class=default --rule="foo.com/bar=svc:port" \
  --annotation ingress.annotation1=foo \
  --annotation ingress.annotation2=bla

  # Create an ingress with the same host and multiple paths
  oc create ingress multipath --class=default \
  --rule="foo.com/=svc:port" \
  --rule="foo.com/admin/=svcadmin:portadmin"

  # Create an ingress with multiple hosts and the pathType as Prefix
  oc create ingress ingress1 --class=default \
  --rule="foo.com/path*=svc:8080" \
  --rule="bar.com/admin*=svc2:http"

  # Create an ingress with TLS enabled using the default ingress certificate and different path types
  oc create ingress ingtls --class=default \
  --rule="foo.com/=svc:https,tls" \
  --rule="foo.com/path/subpath*=othersvc:8080"

  # Create an ingress with TLS enabled using a specific secret and pathType as Prefix
  oc create ingress ingsecret --class=default \
  --rule="foo.com/*=svc:8080,tls=secret1"

  # Create an ingress with a default backend
  oc create ingress ingdefault --class=default \
  --default-backend=defaultsvc:http \
  --rule="foo.com/*=svc:8080,tls=secret1"

Create a job

  # Create a job
  oc create job my-job --image=busybox

  # Create a job with a command
  oc create job my-job --image=busybox -- date

  # Create a job from a cron job named "a-cronjob"
  oc create job test-job --from=cronjob/a-cronjob

Create a new namespace named my-namespace

  # Create a new namespace named my-namespace
  oc create namespace my-namespace

Create a pod disruption budget named my-pdb that will select all pods with the app=rails label

  # Create a pod disruption budget named my-pdb that will select all pods with the app=rails label
  # and require at least one of them being available at any point in time
  oc create poddisruptionbudget my-pdb --selector=app=rails --min-available=1

  # Create a pod disruption budget named my-pdb that will select all pods with the app=nginx label
  # and require at least half of the pods selected to be available at any point in time
  oc create pdb my-pdb --selector=app=nginx --min-available=50%

Create a priority class named high-priority

  # Create a priority class named high-priority
  oc create priorityclass high-priority --value=1000 --description="high priority"

  # Create a priority class named default-priority that is considered as the global default priority
  oc create priorityclass default-priority --value=1000 --global-default=true --description="default priority"

  # Create a priority class named high-priority that cannot preempt pods with lower priority
  oc create priorityclass high-priority --value=1000 --description="high priority" --preemption-policy="Never"

Create a new resource quota named my-quota

  # Create a new resource quota named my-quota
  oc create quota my-quota --hard=cpu=1,memory=1G,pods=2,services=3,replicationcontrollers=2,resourcequotas=1,secrets=5,persistentvolumeclaims=10

  # Create a new resource quota named best-effort
  oc create quota best-effort --hard=pods=100 --scopes=BestEffort

Create a role named "pod-reader" that allows user to perform "get", "watch" and "list" on pods

  # Create a role named "pod-reader" that allows user to perform "get", "watch" and "list" on pods
  oc create role pod-reader --verb=get --verb=list --verb=watch --resource=pods

  # Create a role named "pod-reader" with ResourceName specified
  oc create role pod-reader --verb=get --resource=pods --resource-name=readablepod --resource-name=anotherpod

  # Create a role named "foo" with API Group specified
  oc create role foo --verb=get,list,watch --resource=rs.apps

  # Create a role named "foo" with SubResource specified
  oc create role foo --verb=get,list,watch --resource=pods,pods/status

Create a role binding for user1, user2, and group1 using the admin cluster role

  # Create a role binding for user1, user2, and group1 using the admin cluster role
  oc create rolebinding admin --clusterrole=admin --user=user1 --user=user2 --group=group1

Create an edge route named "my-route" that exposes the frontend service

  # Create an edge route named "my-route" that exposes the frontend service
  oc create route edge my-route --service=frontend

  # Create an edge route that exposes the frontend service and specify a path
  # If the route name is omitted, the service name will be used
  oc create route edge --service=frontend --path /assets

Create a passthrough route named "my-route" that exposes the frontend service

  # Create a passthrough route named "my-route" that exposes the frontend service
  oc create route passthrough my-route --service=frontend

  # Create a passthrough route that exposes the frontend service and specify
  # a host name. If the route name is omitted, the service name will be used
  oc create route passthrough --service=frontend --hostname=www.example.com

Create a route named "my-route" that exposes the frontend service

  # Create a route named "my-route" that exposes the frontend service
  oc create route reencrypt my-route --service=frontend --dest-ca-cert cert.cert

  # Create a reencrypt route that exposes the frontend service, letting the
  # route name default to the service name and the destination CA certificate
  # default to the service CA
  oc create route reencrypt --service=frontend

If you don't already have a .dockercfg file, you can create a dockercfg secret directly by using:

  # If you don't already have a .dockercfg file, you can create a dockercfg secret directly by using:
  oc create secret docker-registry my-secret --docker-server=DOCKER_REGISTRY_SERVER --docker-username=DOCKER_USER --docker-password=DOCKER_PASSWORD --docker-email=DOCKER_EMAIL

  # Create a new secret named my-secret from ~/.docker/config.json
  oc create secret docker-registry my-secret --from-file=.dockerconfigjson=path/to/.docker/config.json

Create a new secret named my-secret with keys for each file in folder bar

  # Create a new secret named my-secret with keys for each file in folder bar
  oc create secret generic my-secret --from-file=path/to/bar

  # Create a new secret named my-secret with specified keys instead of names on disk
  oc create secret generic my-secret --from-file=ssh-privatekey=path/to/id_rsa --from-file=ssh-publickey=path/to/id_rsa.pub

  # Create a new secret named my-secret with key1=supersecret and key2=topsecret
  oc create secret generic my-secret --from-literal=key1=supersecret --from-literal=key2=topsecret

  # Create a new secret named my-secret using a combination of a file and a literal
  oc create secret generic my-secret --from-file=ssh-privatekey=path/to/id_rsa --from-literal=passphrase=topsecret

  # Create a new secret named my-secret from env files
  oc create secret generic my-secret --from-env-file=path/to/foo.env --from-env-file=path/to/bar.env

Create a new TLS secret named tls-secret with the given key pair

  # Create a new TLS secret named tls-secret with the given key pair
  oc create secret tls tls-secret --cert=path/to/tls.cert --key=path/to/tls.key

Create a new ClusterIP service named my-cs

  # Create a new ClusterIP service named my-cs
  oc create service clusterip my-cs --tcp=5678:8080

  # Create a new ClusterIP service named my-cs (in headless mode)
  oc create service clusterip my-cs --clusterip="None"

Create a new ExternalName service named my-ns

  # Create a new ExternalName service named my-ns
  oc create service externalname my-ns --external-name bar.com

Create a new LoadBalancer service named my-lbs

  # Create a new LoadBalancer service named my-lbs
  oc create service loadbalancer my-lbs --tcp=5678:8080

Create a new NodePort service named my-ns

  # Create a new NodePort service named my-ns
  oc create service nodeport my-ns --tcp=5678:8080

Create a new service account named my-service-account

  # Create a new service account named my-service-account
  oc create serviceaccount my-service-account

Request a token to authenticate to the kube-apiserver as the service account "myapp" in the current namespace

  # Request a token to authenticate to the kube-apiserver as the service account "myapp" in the current namespace
  oc create token myapp

  # Request a token for a service account in a custom namespace
  oc create token myapp --namespace myns

  # Request a token with a custom expiration
  oc create token myapp --duration 10m

  # Request a token with a custom audience
  oc create token myapp --audience https://example.com

  # Request a token bound to an instance of a Secret object
  oc create token myapp --bound-object-kind Secret --bound-object-name mysecret

  # Request a token bound to an instance of a Secret object with a specific uid
  oc create token myapp --bound-object-kind Secret --bound-object-name mysecret --bound-object-uid 0d4691ed-659b-4935-a832-355f77ee47cc

Start a shell session into a pod using the OpenShift tools image

  # Start a shell session into a pod using the OpenShift tools image
  oc debug

  # Debug a currently running deployment by creating a new pod
  oc debug deploy/test

  # Debug a node as an administrator
  oc debug node/master-1

  # Launch a shell in a pod using the provided image stream tag
  oc debug istag/mysql:latest -n openshift

  # Test running a job as a non-root user
  oc debug job/test --as-user=1000000

  # Debug a specific failing container by running the env command in the 'second' container
  oc debug daemonset/test -c second -- /bin/env

  # See the pod that would be created to debug
  oc debug mypod-9xbc -o yaml

  # Debug a resource but launch the debug pod in another namespace
  # Note: Not all resources can be debugged using --to-namespace without modification. For example,
  # volumes and service accounts are namespace-dependent. Add '-o yaml' to output the debug pod definition
  # to disk.  If necessary, edit the definition then run 'oc debug -f -' or run without --to-namespace
  oc debug mypod-9xbc --to-namespace testns

Delete a pod using the type and name specified in pod.json

  # Delete a pod using the type and name specified in pod.json
  oc delete -f ./pod.json

  # Delete resources from a directory containing kustomization.yaml - e.g. dir/kustomization.yaml
  oc delete -k dir

  # Delete resources from all files that end with '.json' - i.e. expand wildcard characters in file names
  oc delete -f '*.json'

  # Delete a pod based on the type and name in the JSON passed into stdin
  cat pod.json | oc delete -f -

  # Delete pods and services with same names "baz" and "foo"
  oc delete pod,service baz foo

  # Delete pods and services with label name=myLabel
  oc delete pods,services -l name=myLabel

  # Delete a pod with minimal delay
  oc delete pod foo --now

  # Force delete a pod on a dead node
  oc delete pod foo --force

  # Delete all pods
  oc delete pods --all

Describe a node

  # Describe a node
  oc describe nodes kubernetes-node-emt8.c.myproject.internal

  # Describe a pod
  oc describe pods/nginx

  # Describe a pod identified by type and name in "pod.json"
  oc describe -f pod.json

  # Describe all pods
  oc describe pods

  # Describe pods by label name=myLabel
  oc describe po -l name=myLabel

  # Describe all pods managed by the 'frontend' replication controller
  # (rc-created pods get the name of the rc as a prefix in the pod name)
  oc describe pods frontend

Diff resources included in pod.json

  # Diff resources included in pod.json
  oc diff -f pod.json

  # Diff file read from stdin
  cat service.yaml | oc diff -f -

Edit the service named 'registry'

  # Edit the service named 'registry'
  oc edit svc/registry

  # Use an alternative editor
  KUBE_EDITOR="nano" oc edit svc/registry

  # Edit the job 'myjob' in JSON using the v1 API format
  oc edit job.v1.batch/myjob -o json

  # Edit the deployment 'mydeployment' in YAML and save the modified config in its annotation
  oc edit deployment/mydeployment -o yaml --save-config

  # Edit the deployment/mydeployment's status subresource
  oc edit deployment mydeployment --subresource='status'

List recent events in the default namespace.

  # List recent events in the default namespace.
  oc events

  # List recent events in all namespaces.
  oc events --all-namespaces

  # List recent events for the specified pod, then wait for more events and list them as they arrive.
  oc events --for pod/web-pod-13je7 --watch

  # List recent events in given format. Supported ones, apart from default, are json and yaml.
  oc events -oyaml

  # List recent only events in given event types
  oc events --types=Warning,Normal

Get output from running the 'date' command from pod mypod, using the first container by default

  # Get output from running the 'date' command from pod mypod, using the first container by default
  oc exec mypod -- date

  # Get output from running the 'date' command in ruby-container from pod mypod
  oc exec mypod -c ruby-container -- date

  # Switch to raw terminal mode; sends stdin to 'bash' in ruby-container from pod mypod
  # and sends stdout/stderr from 'bash' back to the client
  oc exec mypod -c ruby-container -i -t -- bash -il

  # List contents of /usr from the first container of pod mypod and sort by modification time
  # If the command you want to execute in the pod has any flags in common (e.g. -i),
  # you must use two dashes (--) to separate your command's flags/arguments
  # Also note, do not surround your command and its flags/arguments with quotes
  # unless that is how you would execute it normally (i.e., do ls -t /usr, not "ls -t /usr")
  oc exec mypod -i -t -- ls -t /usr

  # Get output from running 'date' command from the first pod of the deployment mydeployment, using the first container by default
  oc exec deploy/mydeployment -- date

  # Get output from running 'date' command from the first pod of the service myservice, using the first container by default
  oc exec svc/myservice -- date

Get the documentation of the resource and its fields

  # Get the documentation of the resource and its fields
  oc explain pods

  # Get the documentation of a specific field of a resource
  oc explain pods.spec.containers

Create a route based on service nginx. The new route will reuse nginx's labels

  # Create a route based on service nginx. The new route will reuse nginx's labels
  oc expose service nginx

  # Create a route and specify your own label and route name
  oc expose service nginx -l name=myroute --name=fromdowntown

  # Create a route and specify a host name
  oc expose service nginx --hostname=www.example.com

  # Create a route with a wildcard
  oc expose service nginx --hostname=x.example.com --wildcard-policy=Subdomain
  # This would be equivalent to *.example.com. NOTE: only hosts are matched by the wildcard; subdomains would not be included

  # Expose a deployment configuration as a service and use the specified port
  oc expose dc ruby-hello-world --port=8080

  # Expose a service as a route in the specified path
  oc expose service nginx --path=/nginx

Extract the secret "test" to the current directory

  # Extract the secret "test" to the current directory
  oc extract secret/test

  # Extract the config map "nginx" to the /tmp directory
  oc extract configmap/nginx --to=/tmp

  # Extract the config map "nginx" to STDOUT
  oc extract configmap/nginx --to=-

  # Extract only the key "nginx.conf" from config map "nginx" to the /tmp directory
  oc extract configmap/nginx --to=/tmp --keys=nginx.conf

List all pods in ps output format

  # List all pods in ps output format
  oc get pods

  # List all pods in ps output format with more information (such as node name)
  oc get pods -o wide

  # List a single replication controller with specified NAME in ps output format
  oc get replicationcontroller web

  # List deployments in JSON output format, in the "v1" version of the "apps" API group
  oc get deployments.v1.apps -o json

  # List a single pod in JSON output format
  oc get -o json pod web-pod-13je7

  # List a pod identified by type and name specified in "pod.yaml" in JSON output format
  oc get -f pod.yaml -o json

  # List resources from a directory with kustomization.yaml - e.g. dir/kustomization.yaml
  oc get -k dir/

  # Return only the phase value of the specified pod
  oc get -o template pod/web-pod-13je7 --template={{.status.phase}}

  # List resource information in custom columns
  oc get pod test-pod -o custom-columns=CONTAINER:.spec.containers[0].name,IMAGE:.spec.containers[0].image

  # List all replication controllers and services together in ps output format
  oc get rc,services

  # List one or more resources by their type and names
  oc get rc/web service/frontend pods/web-pod-13je7

  # List status subresource for a single pod.
  oc get pod web-pod-13je7 --subresource status

Remove the entrypoint on the mysql:latest image

  # Remove the entrypoint on the mysql:latest image
  oc image append --from mysql:latest --to myregistry.com/myimage:latest --image '{"Entrypoint":null}'

  # Add a new layer to the image
  oc image append --from mysql:latest --to myregistry.com/myimage:latest layer.tar.gz

  # Add a new layer to the image and store the result on disk
  # This results in $(pwd)/v2/mysql/blobs,manifests
  oc image append --from mysql:latest --to file://mysql:local layer.tar.gz

  # Add a new layer to the image and store the result on disk in a designated directory
  # This will result in $(pwd)/mysql-local/v2/mysql/blobs,manifests
  oc image append --from mysql:latest --to file://mysql:local --dir mysql-local layer.tar.gz

  # Add a new layer to an image that is stored on disk (~/mysql-local/v2/image exists)
  oc image append --from-dir ~/mysql-local --to myregistry.com/myimage:latest layer.tar.gz

  # Add a new layer to an image that was mirrored to the current directory on disk ($(pwd)/v2/image exists)
  oc image append --from-dir v2 --to myregistry.com/myimage:latest layer.tar.gz

  # Add a new layer to a multi-architecture image for an os/arch that is different from the system's os/arch
  # Note: Wildcard filter is not supported with append. Pass a single os/arch to append
  oc image append --from docker.io/library/busybox:latest --filter-by-os=linux/s390x --to myregistry.com/myimage:latest layer.tar.gz

Extract the busybox image into the current directory

  # Extract the busybox image into the current directory
  oc image extract docker.io/library/busybox:latest

  # Extract the busybox image into a designated directory (must exist)
  oc image extract docker.io/library/busybox:latest --path /:/tmp/busybox

  # Extract the busybox image into the current directory for linux/s390x platform
  # Note: Wildcard filter is not supported with extract. Pass a single os/arch to extract
  oc image extract docker.io/library/busybox:latest --filter-by-os=linux/s390x

  # Extract a single file from the image into the current directory
  oc image extract docker.io/library/centos:7 --path /bin/bash:.

  # Extract all .repo files from the image's /etc/yum.repos.d/ folder into the current directory
  oc image extract docker.io/library/centos:7 --path /etc/yum.repos.d/*.repo:.

  # Extract all .repo files from the image's /etc/yum.repos.d/ folder into a designated directory (must exist)
  # This results in /tmp/yum.repos.d/*.repo on local system
  oc image extract docker.io/library/centos:7 --path /etc/yum.repos.d/*.repo:/tmp/yum.repos.d

  # Extract an image stored on disk into the current directory ($(pwd)/v2/busybox/blobs,manifests exists)
  # --confirm is required because the current directory is not empty
  oc image extract file://busybox:local --confirm

  # Extract an image stored on disk in a directory other than $(pwd)/v2 into the current directory
  # --confirm is required because the current directory is not empty ($(pwd)/busybox-mirror-dir/v2/busybox exists)
  oc image extract file://busybox:local --dir busybox-mirror-dir --confirm

  # Extract an image stored on disk in a directory other than $(pwd)/v2 into a designated directory (must exist)
  oc image extract file://busybox:local --dir busybox-mirror-dir --path /:/tmp/busybox

  # Extract the last layer in the image
  oc image extract docker.io/library/centos:7[-1]

  # Extract the first three layers of the image
  oc image extract docker.io/library/centos:7[:3]

  # Extract the last three layers of the image
  oc image extract docker.io/library/centos:7[-3:]

Show information about an image

  # Show information about an image
  oc image info quay.io/openshift/cli:latest

  # Show information about images matching a wildcard
  oc image info quay.io/openshift/cli:4.*

  # Show information about a file mirrored to disk under DIR
  oc image info --dir=DIR file://library/busybox:latest

  # Select which image from a multi-OS image to show
  oc image info library/busybox:latest --filter-by-os=linux/arm64

Copy image to another tag

  # Copy image to another tag
  oc image mirror myregistry.com/myimage:latest myregistry.com/myimage:stable

  # Copy image to another registry
  oc image mirror myregistry.com/myimage:latest docker.io/myrepository/myimage:stable

  # Copy all tags starting with mysql to the destination repository
  oc image mirror myregistry.com/myimage:mysql* docker.io/myrepository/myimage

  # Copy image to disk, creating a directory structure that can be served as a registry
  oc image mirror myregistry.com/myimage:latest file://myrepository/myimage:latest

  # Copy image to S3 (pull from <bucket>.s3.amazonaws.com/image:latest)
  oc image mirror myregistry.com/myimage:latest s3://s3.amazonaws.com/<region>/<bucket>/image:latest

  # Copy image to S3 without setting a tag (pull via @<digest>)
  oc image mirror myregistry.com/myimage:latest s3://s3.amazonaws.com/<region>/<bucket>/image

  # Copy image to multiple locations
  oc image mirror myregistry.com/myimage:latest docker.io/myrepository/myimage:stable \
  docker.io/myrepository/myimage:dev

  # Copy multiple images
  oc image mirror myregistry.com/myimage:latest=myregistry.com/other:test \
  myregistry.com/myimage:new=myregistry.com/other:target

  # Copy manifest list of a multi-architecture image, even if only a single image is found
  oc image mirror myregistry.com/myimage:latest=myregistry.com/other:test \
  --keep-manifest-list=true

  # Copy specific os/arch manifest of a multi-architecture image
  # Run 'oc image info myregistry.com/myimage:latest' to see available os/arch for multi-arch images
  # Note that with multi-arch images, this results in a new manifest list digest that includes only
  # the filtered manifests
  oc image mirror myregistry.com/myimage:latest=myregistry.com/other:test \
  --filter-by-os=os/arch

  # Copy all os/arch manifests of a multi-architecture image
  # Run 'oc image info myregistry.com/myimage:latest' to see list of os/arch manifests that will be mirrored
  oc image mirror myregistry.com/myimage:latest=myregistry.com/other:test \
  --keep-manifest-list=true

  # Note the above command is equivalent to
  oc image mirror myregistry.com/myimage:latest=myregistry.com/other:test \
  --filter-by-os=.*

Build the current working directory

  # Build the current working directory
  oc kustomize

  # Build some shared configuration directory
  oc kustomize /home/config/production

  # Build from github
  oc kustomize https://github.com/kubernetes-sigs/kustomize.git/examples/helloWorld?ref=v1.0.6

Update pod 'foo' with the label 'unhealthy' and the value 'true'

  # Update pod 'foo' with the label 'unhealthy' and the value 'true'
  oc label pods foo unhealthy=true

  # Update pod 'foo' with the label 'status' and the value 'unhealthy', overwriting any existing value
  oc label --overwrite pods foo status=unhealthy

  # Update all pods in the namespace
  oc label pods --all status=unhealthy

  # Update a pod identified by the type and name in "pod.json"
  oc label -f pod.json status=unhealthy

  # Update pod 'foo' only if the resource is unchanged from version 1
  oc label pods foo status=unhealthy --resource-version=1

  # Update pod 'foo' by removing a label named 'bar' if it exists
  # Does not require the --overwrite flag
  oc label pods foo bar-

Start streaming the logs of the most recent build of the openldap build config

  # Start streaming the logs of the most recent build of the openldap build config
  oc logs -f bc/openldap

  # Start streaming the logs of the latest deployment of the mysql deployment config
  oc logs -f dc/mysql

  # Get the logs of the first deployment for the mysql deployment config. Note that logs
  # from older deployments may not exist either because the deployment was successful
  # or due to deployment pruning or manual deletion of the deployment
  oc logs --version=1 dc/mysql

  # Return a snapshot of ruby-container logs from pod backend
  oc logs backend -c ruby-container

  # Start streaming of ruby-container logs from pod backend
  oc logs -f pod/backend -c ruby-container

Observe changes to services

  # Observe changes to services
  oc observe services

  # Observe changes to services, including the clusterIP and invoke a script for each
  oc observe services --template '{ .spec.clusterIP }' -- register_dns.sh

  # Observe changes to services filtered by a label selector
  oc observe namespaces -l regist-dns=true --template '{ .spec.clusterIP }' -- register_dns.sh

Partially update a node using a strategic merge patch, specifying the patch as JSON

  # Partially update a node using a strategic merge patch, specifying the patch as JSON
  oc patch node k8s-node-1 -p '{"spec":{"unschedulable":true}}'

  # Partially update a node using a strategic merge patch, specifying the patch as YAML
  oc patch node k8s-node-1 -p $'spec:\n unschedulable: true'

  # Partially update a node identified by the type and name specified in "node.json" using strategic merge patch
  oc patch -f node.json -p '{"spec":{"unschedulable":true}}'

  # Update a container's image; spec.containers[*].name is required because it's a merge key
  oc patch pod valid-pod -p '{"spec":{"containers":[{"name":"kubernetes-serve-hostname","image":"new image"}]}}'

  # Update a container's image using a JSON patch with positional arrays
  oc patch pod valid-pod --type='json' -p='[{"op": "replace", "path": "/spec/containers/0/image", "value":"new image"}]'

  # Update a deployment's replicas through the scale subresource using a merge patch.
  oc patch deployment nginx-deployment --subresource='scale' --type='merge' -p '{"spec":{"replicas":2}}'

List all available plugins

  # List all available plugins
  oc plugin list

Add the 'view' role to user1 for the current project

  # Add the 'view' role to user1 for the current project
  oc policy add-role-to-user view user1

  # Add the 'edit' role to serviceaccount1 for the current project
  oc policy add-role-to-user edit -z serviceaccount1

Check whether service accounts sa1 and sa2 can admit a pod with a template pod spec specified in my_resource.yaml

  # Check whether service accounts sa1 and sa2 can admit a pod with a template pod spec specified in my_resource.yaml
  # Service Account specified in myresource.yaml file is ignored
  oc policy scc-review -z sa1,sa2 -f my_resource.yaml

  # Check whether service accounts system:serviceaccount:bob:default can admit a pod with a template pod spec specified in my_resource.yaml
  oc policy scc-review -z system:serviceaccount:bob:default -f my_resource.yaml

  # Check whether the service account specified in my_resource_with_sa.yaml can admit the pod
  oc policy scc-review -f my_resource_with_sa.yaml

  # Check whether the default service account can admit the pod; default is taken since no service account is defined in myresource_with_no_sa.yaml
  oc policy scc-review -f myresource_with_no_sa.yaml

Check whether user bob can create a pod specified in myresource.yaml

  # Check whether user bob can create a pod specified in myresource.yaml
  oc policy scc-subject-review -u bob -f myresource.yaml

  # Check whether user bob who belongs to projectAdmin group can create a pod specified in myresource.yaml
  oc policy scc-subject-review -u bob -g projectAdmin -f myresource.yaml

  # Check whether a service account specified in the pod template spec in myresourcewithsa.yaml can create the pod
  oc policy scc-subject-review -f myresourcewithsa.yaml

Listen on ports 5000 and 6000 locally, forwarding data to/from ports 5000 and 6000 in the pod

  # Listen on ports 5000 and 6000 locally, forwarding data to/from ports 5000 and 6000 in the pod
  oc port-forward pod/mypod 5000 6000

  # Listen on ports 5000 and 6000 locally, forwarding data to/from ports 5000 and 6000 in a pod selected by the deployment
  oc port-forward deployment/mydeployment 5000 6000

  # Listen on port 8443 locally, forwarding to the targetPort of the service's port named "https" in a pod selected by the service
  oc port-forward service/myservice 8443:https

  # Listen on port 8888 locally, forwarding to 5000 in the pod
  oc port-forward pod/mypod 8888:5000

  # Listen on port 8888 on all addresses, forwarding to 5000 in the pod
  oc port-forward --address 0.0.0.0 pod/mypod 8888:5000

  # Listen on port 8888 on localhost and selected IP, forwarding to 5000 in the pod
  oc port-forward --address localhost,10.19.21.23 pod/mypod 8888:5000

  # Listen on a random port locally, forwarding to 5000 in the pod
  oc port-forward pod/mypod :5000

To proxy all of the Kubernetes API and nothing else

  # To proxy all of the Kubernetes API and nothing else
  oc proxy --api-prefix=/

  # To proxy only part of the Kubernetes API and also some static files
  # You can get pods info with 'curl localhost:8001/api/v1/pods'
  oc proxy --www=/my/files --www-prefix=/static/ --api-prefix=/api/

  # To proxy the entire Kubernetes API at a different root
  # You can get pods info with 'curl localhost:8001/custom/api/v1/pods'
  oc proxy --api-prefix=/custom/

  # Run a proxy to the Kubernetes API server on port 8011, serving static content from ./local/www/
  oc proxy --port=8011 --www=./local/www/

  # Run a proxy to the Kubernetes API server on an arbitrary local port
  # The chosen port for the server will be output to stdout
  oc proxy --port=0

  # Run a proxy to the Kubernetes API server, changing the API prefix to k8s-api
  # This makes e.g. the pods API available at localhost:8001/k8s-api/v1/pods/
  oc proxy --api-prefix=/k8s-api

Perform a rollback to the last successfully completed deployment for a deployment config

  # Perform a rollback to the last successfully completed deployment for a deployment config
  oc rollback frontend

  # See what a rollback to version 3 will look like, but do not perform the rollback
  oc rollback frontend --to-version=3 --dry-run

  # Perform a rollback to a specific deployment
  oc rollback frontend-2

  # Perform the rollback manually by piping the JSON of the new config back to oc
  oc rollback frontend -o json | oc replace dc/frontend -f -

  # Print the updated deployment configuration in JSON format instead of performing the rollback
  oc rollback frontend -o json

Cancel the in-progress deployment based on 'nginx'

  # Cancel the in-progress deployment based on 'nginx'
  oc rollout cancel dc/nginx

View the rollout history of a deployment

  # View the rollout history of a deployment
  oc rollout history dc/nginx

  # View the details of deployment revision 3
  oc rollout history dc/nginx --revision=3

Start a new rollout based on the latest images defined in the image change triggers

  # Start a new rollout based on the latest images defined in the image change triggers
  oc rollout latest dc/nginx

  # Print the rolled out deployment config
  oc rollout latest dc/nginx -o json

Mark the nginx deployment as paused. Any current state of

  # Mark the nginx deployment as paused. Any current state of
  # the deployment will continue its function, new updates to the deployment will not
  # have an effect as long as the deployment is paused
  oc rollout pause dc/nginx

Restart a deployment

  # Restart a deployment
  oc rollout restart deployment/nginx

  # Restart a daemon set
  oc rollout restart daemonset/abc

  # Restart deployments with the app=nginx label
  oc rollout restart deployment --selector=app=nginx

Resume an already paused deployment

  # Resume an already paused deployment
  oc rollout resume dc/nginx

Retry the latest failed deployment based on 'frontend'

  # Retry the latest failed deployment based on 'frontend'
  # The deployer pod and any hook pods are deleted for the latest failed deployment
  oc rollout retry dc/frontend

Watch the status of the latest rollout

  # Watch the status of the latest rollout
  oc rollout status dc/nginx

Roll back to the previous deployment

  # Roll back to the previous deployment
  oc rollout undo dc/nginx

  # Roll back to deployment revision 3. The replication controller for that version must exist
  oc rollout undo dc/nginx --to-revision=3

Open a shell session on the first container in pod 'foo'

  # Open a shell session on the first container in pod 'foo'
  oc rsh foo

  # Open a shell session on the first container in pod 'foo' and namespace 'bar'
  # (Note that oc client specific arguments must come before the resource name and its arguments)
  oc rsh -n bar foo

  # Run the command 'cat /etc/resolv.conf' inside pod 'foo'
  oc rsh foo cat /etc/resolv.conf

  # See the configuration of your internal registry
  oc rsh dc/docker-registry cat config.yml

  # Open a shell session on the container named 'index' inside a pod of your job
  oc rsh -c index job/sheduled

Synchronize a local directory with a pod directory

  # Synchronize a local directory with a pod directory
  oc rsync ./local/dir/ POD:/remote/dir

  # Synchronize a pod directory with a local directory
  oc rsync POD:/remote/dir/ ./local/dir

Start a nginx pod

  # Start a nginx pod
  oc run nginx --image=nginx

  # Start a hazelcast pod and let the container expose port 5701
  oc run hazelcast --image=hazelcast/hazelcast --port=5701

  # Start a hazelcast pod and set environment variables "DNS_DOMAIN=cluster" and "POD_NAMESPACE=default" in the container
  oc run hazelcast --image=hazelcast/hazelcast --env="DNS_DOMAIN=cluster" --env="POD_NAMESPACE=default"

  # Start a hazelcast pod and set labels "app=hazelcast" and "env=prod" in the container
  oc run hazelcast --image=hazelcast/hazelcast --labels="app=hazelcast,env=prod"

  # Dry run; print the corresponding API objects without creating them
  oc run nginx --image=nginx --dry-run=client

  # Start a nginx pod, but overload the spec with a partial set of values parsed from JSON
  oc run nginx --image=nginx --overrides='{ "apiVersion": "v1", "spec": { ... } }'

  # Start a busybox pod and keep it in the foreground, don't restart it if it exits
  oc run -i -t busybox --image=busybox --restart=Never

  # Start the nginx pod using the default command, but use custom arguments (arg1 .. argN) for that command
  oc run nginx --image=nginx -- <arg1> <arg2> ... <argN>

  # Start the nginx pod using a different command and custom arguments
  oc run nginx --image=nginx --command -- <cmd> <arg1> ... <argN>

Scale a replica set named 'foo' to 3

  # Scale a replica set named 'foo' to 3
  oc scale --replicas=3 rs/foo

  # Scale a resource identified by type and name specified in "foo.yaml" to 3
  oc scale --replicas=3 -f foo.yaml

  # If the deployment named mysql's current size is 2, scale mysql to 3
  oc scale --current-replicas=2 --replicas=3 deployment/mysql

  # Scale multiple replication controllers
  oc scale --replicas=5 rc/foo rc/bar rc/baz

  # Scale stateful set named 'web' to 3
  oc scale --replicas=3 statefulset/web

Add an image pull secret to a service account to automatically use it for pulling pod images

  # Add an image pull secret to a service account to automatically use it for pulling pod images
  oc secrets link serviceaccount-name pull-secret --for=pull

  # Add an image pull secret to a service account to automatically use it for both pulling and pushing build images
  oc secrets link builder builder-image-secret --for=pull,mount

Unlink a secret currently associated with a service account

  # Unlink a secret currently associated with a service account
  oc secrets unlink serviceaccount-name secret-name another-secret-name ...

Set the 'password' key of a secret

  # Set the 'password' key of a secret
  oc set data secret/foo password=this_is_secret

  # Remove the 'password' key from a secret
  oc set data secret/foo password-

  # Update the 'haproxy.conf' key of a config map from a file on disk
  oc set data configmap/bar --from-file=../haproxy.conf

  # Update a secret with the contents of a directory, one key per file
  oc set data secret/foo --from-file=secret-dir

Update deployment config 'myapp' with a new environment variable

  # Update deployment config 'myapp' with a new environment variable
  oc set env dc/myapp STORAGE_DIR=/local

  # List the environment variables defined on a build config 'sample-build'
  oc set env bc/sample-build --list

  # List the environment variables defined on all pods
  oc set env pods --all --list

  # Output modified build config in YAML
  oc set env bc/sample-build STORAGE_DIR=/data -o yaml

  # Update all containers in all replication controllers in the project to have ENV=prod
  oc set env rc --all ENV=prod

  # Import environment from a secret
  oc set env --from=secret/mysecret dc/myapp

  # Import environment from a config map with a prefix
  oc set env --from=configmap/myconfigmap --prefix=MYSQL_ dc/myapp

  # Remove the environment variable ENV from container 'c1' in all deployment configs
  oc set env dc --all --containers="c1" ENV-

  # Remove the environment variable ENV from a deployment config definition on disk and
  # update the deployment config on the server
  oc set env -f dc.json ENV-

  # Set some of the local shell environment into a deployment config on the server
  oc set env | grep RAILS_ | oc env -e - dc/myapp

Set a deployment configs's nginx container image to 'nginx:1.9.1', and its busybox container image to 'busybox'.

  # Set a deployment configs's nginx container image to 'nginx:1.9.1', and its busybox container image to 'busybox'.
  oc set image dc/nginx busybox=busybox nginx=nginx:1.9.1

  # Set a deployment configs's app container image to the image referenced by the imagestream tag 'openshift/ruby:2.3'.
  oc set image dc/myapp app=openshift/ruby:2.3 --source=imagestreamtag

  # Update all deployments' and rc's nginx container's image to 'nginx:1.9.1'
  oc set image deployments,rc nginx=nginx:1.9.1 --all

  # Update image of all containers of daemonset abc to 'nginx:1.9.1'
  oc set image daemonset abc *=nginx:1.9.1

  # Print result (in yaml format) of updating nginx container image from local file, without hitting the server
  oc set image -f path/to/file.yaml nginx=nginx:1.9.1 --local -o yaml

Print all of the image streams and whether they resolve local names

  # Print all of the image streams and whether they resolve local names
  oc set image-lookup

  # Use local name lookup on image stream mysql
  oc set image-lookup mysql

  # Force a deployment to use local name lookup
  oc set image-lookup deploy/mysql

  # Show the current status of the deployment lookup
  oc set image-lookup deploy/mysql --list

  # Disable local name lookup on image stream mysql
  oc set image-lookup mysql --enabled=false

  # Set local name lookup on all image streams
  oc set image-lookup --all

Clear both readiness and liveness probes off all containers

  # Clear both readiness and liveness probes off all containers
  oc set probe dc/myapp --remove --readiness --liveness

  # Set an exec action as a liveness probe to run 'echo ok'
  oc set probe dc/myapp --liveness -- echo ok

  # Set a readiness probe to try to open a TCP socket on 3306
  oc set probe rc/mysql --readiness --open-tcp=3306

  # Set an HTTP startup probe for port 8080 and path /healthz over HTTP on the pod IP
  oc set probe dc/webapp --startup --get-url=http://:8080/healthz

  # Set an HTTP readiness probe for port 8080 and path /healthz over HTTP on the pod IP
  oc set probe dc/webapp --readiness --get-url=http://:8080/healthz

  # Set an HTTP readiness probe over HTTPS on 127.0.0.1 for a hostNetwork pod
  oc set probe dc/router --readiness --get-url=https://127.0.0.1:1936/stats

  # Set only the initial-delay-seconds field on all deployments
  oc set probe dc --all --readiness --initial-delay-seconds=30

Set a deployments nginx container CPU limits to "200m and memory to 512Mi"

  # Set a deployments nginx container CPU limits to "200m and memory to 512Mi"
  oc set resources deployment nginx -c=nginx --limits=cpu=200m,memory=512Mi

  # Set the resource request and limits for all containers in nginx
  oc set resources deployment nginx --limits=cpu=200m,memory=512Mi --requests=cpu=100m,memory=256Mi

  # Remove the resource requests for resources on containers in nginx
  oc set resources deployment nginx --limits=cpu=0,memory=0 --requests=cpu=0,memory=0

  # Print the result (in YAML format) of updating nginx container limits locally, without hitting the server
  oc set resources -f path/to/file.yaml --limits=cpu=200m,memory=512Mi --local -o yaml