Release notes

Currently, kubevirt prevents mapping multiple network interface controllers (NICs) to a single network attachment definition (NAD). With this enhancement, you can map a single source network to multiple destination NADs.

When the NICs are created in the target virtual machine (VM), each receives a different NAD from the mapped pool. As a result, you can successfully migrate VMs with multiple NICs on the same source network. The following example shows the network-21 source network mapped to the nad-a and nad-b destination NADs:

spec:
  map:
    - destination:
        name: nad-a
        namespace: mtv-5511-test
        type: multus
      source:
        id: network-21
    - destination:
        name: nad-b
        namespace: mtv-5511-test
        type: multus
      source:
        id: network-21

MTV-5623

MTV provides the capability to configure static IP addresses on a source Windows virtual machine (VM) even if the DHCP Client service is disabled. With this enhancement, the network configuration script sets static IPs during a migration without relying on the DHCP service. As a result, MTV preserves static IPs on migrated Windows VMs if you enable the feature_windows_registry_network_config feature flag.

MTV-5245

You can configure a custom ServiceAccount object for all MTV pods, including CDI pods. This enhancement supports migrating workloads that are run under specific service accounts with well-defined RBAC roles. As a result, MTV can access storage backends, pull secrets, or perform API calls requiring a dedicated ServiceAccount object with specific permissions.

MTV-4722

In a single migration plan, you can define which VMs share a disk. This enhancement eliminates the need to create two migration plans when migrating shared disks. Before this update, you had to create one plan where all VMs share a disk and another where none do. As a result, you can streamline the process for migrating shared disks.

MTV-4978

Storage copy offload migrations support mapping Raw Device Mapping (RDM) disks as either logical unit number (LUN) disks or regular disks. This enhancement ensures RDM disks are mapped appropriately. As a result, you can specify that RDM disks attach as LUN disks during a storage copy offload migration.

MTV-5020

MTV supports volume-to-volume copy operations for storage copy offload migrations on HPE Primera and HPE 3PAR arrays. These operations copy the underlying VMware Raw Device Mapping (RDM) or VMware vSphere Virtual Volumes (vVols) volume onto the target volume that the CSI driver creates. With this enhancement, you can perform storage copy offload migrations for HPE Primera or HPE 3PAR storage providers.

MTV-4717

You can control nested virtualization behavior during migration with the enableNestedVirtualization option. This option accepts three values:

Direct OVA import, available as a Technology Preview before this update, is fully supported in MTV 2.11.1. You can upload Open Virtual Appliances (OVAs) to a Network File System (NFS) by using the web browser in the MTV user interface (UI). As a result, you can import OVAs directly from local machines to OpenShift Virtualization.

MTV-3698

You can set a service account name for pre-plan and post-plan hooks in the Create migration plan pages. This UI setting provides greater flexibility and control over the service accounts used in these hooks. It ensures that the accounts have the necessary permissions to manage cluster resources.

Because service account information is not stored in the remote cluster inventory, the Service account field is a free text field. As a result, you can improve the overall security and customization of your deployment.

MTV-3681

This enhancement improves the visibility of pre-migration concerns for individual VMs. It provides a clear taxonomy and visual indicators to distinguish between issue types. These types include critical issues, VM-specific failures, and ignorable warnings.

The updated UI includes new icons, colors, and labels for quick comprehension of validation issue severity. The Conditions column of the VM table displays all current concerns impacting the plan. You can use filters for Name, Severity, Type, and Folder.

A total of critical alerts is displayed at the top of the page. You can click the View all alerts button for detailed analysis. As a result, this improvement increases clarity and simplifies the migration process.

MTV-3712

The Tips and tricks section in the MTV UI is significantly expanded. It offers curated learning paths and improved user guidance.

This enhancement simplifies complex workflow steps and reorganizes content for a better learning process. It also integrates with Red Hat OpenShift Lightspeed for dynamic guidance. As a result, you can learn and navigate the system more effectively.

MTV-3718

MTV provides performance metrics during migration, including network and storage throughput. This enhancement helps you make informed decisions about system configuration for better performance tuning. Real-time insights into these metrics during migration plans are available in the MTV UI. As a result, you can closely monitor and optimize your migration performance.

MTV-3636

You can add descriptive notes to migration plans during creation. With the Description field, you can easily differentiate and manage various plans within the web console.

You can identify the purpose, scope, and owner by adding reasons for each migration. This added context is visible in the Migration plans table and the Plan details page. As a result, you can improve the long-term management and auditing of your migration plans.

MTV-3748

With this enhancement, a consistent interaction model is available for editing forms and fields across the web console. The design includes an Edit button that opens a modal for inputs.

By eliminating varying UI behaviors on different pages, you can increase clarity and reduce configuration errors. As a result, you can manage administrative tasks more efficiently.

MTV-3742

The Create provider form has unique authentication and validation fields for source providers. These providers include OpenShift, OpenStack, Red Hat Virtualization (oVirt), and VMware vSphere. As a result, you can securely and accurately configure connections to each specific provider type.

MTV-3737

With this enhancement, visible validation checks for warm migrations from VMware environments are available in the web console. You receive an alert if the VMware Virtual Disk Development Kit (VDDK) is missing or incorrectly configured.

These validation checks prevent silent failures during migration. Updated MTV documentation provides guidance on VDDK installation. As a result, you can save time on your migration plans.

MTV-3805

Data integrity during VM migration is enhanced by using features introduced in RHEL 10.1. With this enhancement, MTV performs file system-level consistency checks, improves system error handling, and provides internal diagnostics. As a result, warm migration and features such as storage copy offload minimize downtime with efficient disk migration and data transfer.

MTV-3906

The storage copy offload feature accelerates disk transfer in the storage array by bypassing the network. With this enhancement, you can create snapshots and copy base disks. As a result, you can reduce network usage, improve overall performance, and enhance migration efficiency.

Native alerting integrates with the OpenShift Prometheus-based monitoring stack. With this enhancement, MTV provides notifications for migration plan failures or critical issues, reducing manual monitoring. You can configure alerts for email, Slack, or PagerDuty. As a result, you ensure timely notifications and minimize downtime.

MTV-2529

You can perform a pre-migration check for dual-boot VMs. With this enhancement, MTV fetches additional information from guest machines to provide a more accurate conversion assessment before migration. As a result, you can ensure a successful conversion before the migration process begins.

MTV-2481

You can import VMs directly from Amazon EC2. With this enhancement, you can perform cold migrations to ROSA, with storage mapping limited to the same storage. You cannot currently target non-ROSA platforms, different accounts, or different regions, and MTV does not support warm and live migrations for this feature. As a result, you have more migration options.

MTV-2735

You can specify firstboot scripts for individual migration plans. With this enhancement, MTV uses virt-customize to execute the scripts and inject them during VM conversion and startup. This eliminates the need for SSH keys for VM migrations. As a result, you can enhance deployment flexibility and personalization.

MTV-3638

You can assign a secondary network to forklift-controller pods. This capability is similar to Importer and Populator pods.

This enhancement addresses connectivity issues with the Red Hat OpenShift default node network and VMware or RHV providers. The existing CRD flag is reused for network assignment.

As a result, you can simplify the network configuration setup and reduce the need for cluster-wide changes.

MTV-3644

You can set the default gateway directly in the Network Attachment Definition (NAD) configuration. If the default route annotation is not set, MTV attempts to fetch the default gateway from the NAD. As a result, you can ensure proper network routing even without a default route annotation.

MTV-3699

You can customize ephemeral storage during migration. With this enhancement, you can prevent failures due to insufficient node storage in large-scale migrations and Open Virtualization Appliance (OVA) imports.

You can define a storageClass for temporary storage, which enables virt-v2v pods to mount a temporary Persistent Volume Claim (PVC) on the defined storageClass.

As a result, you improve migration stability and reduce the likelihood of migration failures. This capability is available as a Technology Preview feature.

MTV-3709

MTV automatically detects the operating system of the VMs. This enhancement optimizes VM performance in MTV and reduces the need for manual adjustments. As a result, you can save time and reduce potential errors.

MTV-3963

During VM migration, MTV verifies that IP addresses are from the correct subnet before assignment. MTV preserves and assigns IP addresses from the subnet for VMs with explicitly assigned IP addresses during migration to OpenShift Virtualization. As a result, you can ensure accurate IP address assignment and prevent IP address mismatches during migration.

MTV-3130

The virtio-win package, which provides drivers for Microsoft Windows virtual machines, has been rebased to upstream version 1.9.57. This version provides important fixes and enhancements. For more information, see the following security advisory:

RHSA-2026:5077 - Security Advisory

Before this update, virtual machine (VM) UUID duplication in VMware caused inconsistent libvirt domain name returns. As a consequence, duplicate VM names led to confusion and incorrect selection. With this release, the libvirt API correctly identifies VM UUIDs. As a result, libvirt no longer returns incorrect VM names.

MTV-5326

Before this update, setting spec.rdmAsLun=true in a MigrationPlan did not correctly convert the RDM disk interface from virtio to SCSI. As a consequence, the logical unit number (LUN) type was incompatible. With this release, the interface type conversion for RDM disks in a MigrationPlan is corrected. As a result, RDM disks converted to a LUN have the required SCSI interface type.

MTV-5387

Before this update, the GetAllHosts function on Infinidat InfiniBox arrays used an upstream driver that lacked pagination. Because of this, the function silently returned only the first page. As a consequence, host lookups failed during volume mapping on InfiniBox arrays with many hosts. With this release, the GetAllHosts function is updated to use a driver that supports pagination. As a result, MTV prevents host lookup failures during volume mapping on InfiniBox arrays with many hosts.

MTV-5390

Before this update, the script incorrectly treated configurations with multiple IP addresses on a single MAC address as duplicate MAC addresses. As a consequence, the script generated an empty /etc/udev/rules.d/70-persistent-net.rules file, causing issues like renamed network interface controllers (NICs) and missing IP addresses on boot. With this release, the duplicate MAC address detection logic no longer treats multiple IP addresses per MAC address as an error. As a result, MTV correctly handles multiple IP addresses per MAC address during Linux guest migrations, ensuring persistent network configuration in OpenShift Virtualization.

MTV-5522

Before this update, MTV failed to clean up persistent volume claims (PVCs) after archiving a failed XCOPY migration. As a consequence, orphaned PVCs remained on the cluster, which caused logical unit number (LUN) utilization issues. With this release, the PVC cleanup process is updated for XCOPY storage copy offload migrations. As a result, MTV automatically cleans up PVCs after a migration failure, which prevents unnecessary LUN utilization and operational issues.

MTV-5546

Before this update, the Convert-PrefixToMask function failed when PowerShell Constrained Language Mode (CLM) was enabled on the target virtual machine (VM). As a consequence, MTV wrote empty subnet masks to the registry during migration. With this release, the Convert-PrefixToMask function is updated to operate correctly under PowerShell CLM. As a result, MTV writes the correct subnet masks to the registry when PowerShell CLM is enabled on the target VM.

MTV-5555

Before this update, when converting a RHEL 7 guest, XFSv5 incorrectly reported file system corruption without actual issues. As a consequence, these false alarms caused migration plans to fail. With this release, as a temporary measure, MTV adds the feature_xfs_repair_ignore option to skip the test. As a result, enabling this option allows conversions to continue. If you are unsure whether to use this flag in specific cases, contact Red Hat Support for guidance.

MTV-5584

Before this update, the getPopulatorCrList() function filtered only migration user identifiers (UIDs). As a consequence, cleanup deleted custom resources (CRs) of all virtual machines (VMs) that started in previous waves, which caused populator pod failures. With this release, MTV adds a vmID filter to the getPopulatorCrList() function. As a result, the migration process no longer deletes CRs of active VMs during cleanup, which prevents populator pod failures.

MTV-5602

Before this update, unaccounted copy-offload disk operations in the populator flow exceeded the maxInFlight limit. As a consequence, excessive concurrent disk operations caused user scale tests to fail. With this release, the new controller_max_populator_inflight parameter limits running volume populators per ESXi source host. As a result, maxInFlight limits concurrent virtual machine (VM) migrations, which prevents concurrency failures.

MTV-5621

Before this update, a Fibre Channel (FC) initiator lookup format mismatch with the PowerMax API caused ID validation errors. As a consequence, unnecessary re-mapping on unchanged volumes caused failures that prevented MTV from populating PowerMax storage. With this release, MTV uses the correct FC initiator lookup format and removes the unnecessary re-mapping loop. As a result, MTV successfully populates PowerMax storage during storage copy offload migrations.

MTV-5624

Before this update, MTV automatically installed a vSphere Installation Bundle (VIB) called vmkfstools-wrapper on each clone. This often caused memory issues on ESXi hosts, and migrations failed as a result. This release removes automatic VIB installation, and memory failures no longer occur during clone operations. The vmkfstools-wrapper VIB is only needed for storage copy offload migrations. For information about VIB installation, see Setting up storage copy offload using the VIB.

MTV-5320

Before this update, each populator pod attempted to check and install the VIB on the ESXi host at runtime. When many pods spawned simultaneously for a virtual machine with many disks, the concurrent esxcli calls overwhelmed the host. As a consequence, populator pods failed. With this update, the automatic VIB installation is removed from the populator flow. As a result, populator pods no longer fail with VIB installation errors. You must install the VIB on ESXi hosts manually before a migration.

MTV-5320

Before this update, the network configuration script failed to set static IP addresses if the DHCP Client service was disabled in a source Windows virtual machine (VM). As a consequence, MTV did not preserve static IPs during the migration. With this update, a patch was implemented to enable static IP configuration even when the DHCP service is disabled. As a result, MTV preserves static IPs on migrated Windows VMs if the user enables the feature_windows_registry_network_config feature flag.

MTV-5245

Before this update, a user could create a migration plan with the preserve static IP option selected for a VM that had no IP address. As a consequence, MTV allowed the migration to proceed. With this release, the system was modified to verify the presence of an IP address before running the plan. As a result, MTV blocks the migration plan.

MTV-5244

Before this update, the MTV user interface (UI) displayed Hyper-V as a source provider even though it is not supported. As a consequence, users could view an unsupported source provider in the UI. With this release, the UI was modified to remove Hyper-V from the list of available source providers. As a result, the MTV UI does not display Hyper-V as a source provider.

MTV-5174

Before this update, MTV could not distinguish between multiple VMs sharing the same BIOS UUID. As a consequence, MTV incorrectly powered off the first matching VM during migration, leading to potential data loss and downtime. With this release, the migration process was modified to use moRef instead of BIOS UUID. As a result, MTV correctly identifies and powers off the correct VM during migration. While MTV correctly handles the power-off phase, environments with duplicate BIOS UUIDs might still experience migration failures due to a known issue in Libvirt. For more information, see the "Known issues" section.

MTV-5091

Before this update, MTV did not allocate enough disk space when pre-creating output disks during migrations from Red Hat Enterprise Linux (RHEL) 3, 4, or 5. As a consequence, the migrations failed with an error indicating that the destination size was smaller than the source size. With this update, the estimated disk size was increased. As a result, MTV allocates the correct disk space, and the migrations succeed.

MTV-4872

Before this update, migration failures occurred due to memory-related issues on more than 30 virtual machines (VMs). Additionally, during storage copy offload migrations that were set up by using SSH, a script was truncated on some uploads, which prevented other tasks from reading it. As a consequence, some VMs remained incomplete during migration, and the system returned a failed to update task status: failed to get task status: failed to parse status response: failed to parse XML response: EOF error. With this update, the memory footprint and script truncation issues on ESX and ESXi were fixed. As a result, the migration of more than 35 VMs is successful, improving the stability of the migration process. This fix applies only to storage copy offload migrations that are set up by using SSH; it does not apply to migrations that are set up by using a vSphere Installation on Bundle (VIB).

MTV-4732

Before this update, when migrating a virtual machine with a Sun partition table and Veritas storage, the disk cylinder-head-sector (CHS) geometry reported by the operating system did not match the geometry stored on the disk label. As a consequence, the parted command could not find the file system type, and the migration failed with a libguestfs error. With this update, the migration process correctly handles the geometry mismatch. As a result, virtual machines with Sun partition tables and Veritas storage migrate successfully.

MTV-5253

Before this update, virtual machine migrations with the xfsCompatibility parameter enabled to RHEL 9-based platforms encountered issues because the --no-fstrim option was incorrectly applied to the migration process. With this release, the --no-fstrim option is removed for these migrations. As a result, migrations based on RHEL 9 platforms run correctly.

MTV-5062

Before this update, if an ESXi host’s Fibre Channel or iSCSI initiators were not registered as a host object in Dell PowerMax during a storage copy offload migration, the migration proceeded with an empty hostID value. As a consequence, the system displayed an unclear CreateMaskingView error message.

With this update, the system validates the initiator registration. As a result, if the initiators are not registered, the system displays the following message to help you resolve the problem:

Can't find a host on Symmetrix %s with initiators matching %v. Ensure the ESXi host has a corresponding host object in PowerMax with the correct FC/iSCSI initiators registered.

MTV-4873

Before this update, the timeout for a Pure Storage FlashArray HTTP client was hard-coded to 30 seconds. As a consequence, during migrations of VMs with many disks, simultaneous CopyVolume requests to the Pure Storage FlashArray timed out, leaving PVCs stuck in Pending status.

With this update, you can configure the timeout by setting the new STORAGE_HTTP_TIMEOUT_SECONDS key and value in the Pure Storage FlashArray Secret. As a result, migrations complete successfully without timing out. Note that the key’s default value is 30 seconds.

MTV-5004

Before this update, large (multi-terabyte) warm migrations took a long time during the fstrim stage of virt-v2v.

With this update, MTV uses the --no-fstrim option for virt-v2v. As a result, large warm migrations run correctly. The converted guest might use more space after the conversion.

MTV-4941

Before this update, VM migration succeeded when two Network Interface Controllers (NICs) were connected to the same Network Attachment Definition (NAD). As a consequence, users could not boot the VM after successful migration because both NICs were connected to the same target NAD. This update prevents the assignment of multiple NICs to the same NAD during VM migration, avoiding potential boot failures and failed migrations.

MTV-3075

Before this update, misleading ConnectionTestFailed error messages were displayed for Open Virtual Appliance (OVA) providers during creation, due to an issue with the readiness probe in the OVA provider’s pod specification. This update hides misleading ConnectionTestFailed error messages, allowing for accurate progress visualization during provider creation.

MTV-3613

Before this update, the deletion of network or storage maps in the forklift-controller could cause unexpected shutdowns. With this update, deletion of these maps now results in migration plans moving to a NotReady state, instead of actively terminating associated pods.

MTV-4413

Before this update, insufficient memory limits in the forklift-cli-download pod caused Kubernetes OOMKilled memory errors after an update of the MTV Operator. As a result, the pod entered the CrashLoopBackOff state. This update increases memory limits for the forklift-cli-download pod to prevent OOMKilled errors, improving deployment stability.

MTV-4482

Before this update, VM migrations on ESXi hosts with both FC and iSCSI adapters could experience issues with XCOPY usage because NetApp ONTAP initiator groups contained both FC and iSCSI initiators. With this update, you can filter initiators in ONTAP initiator groups by protocol for XCOPY consistency.

MTV-4515

Before this update, copy offload for Persistent Volume Claims (PVCs) that use the ontap-san-economy storage class assumed all PVCs used dedicated FlexVols with a specific LUN path. With this update, MTV detects the economy storage class and extracts the correct LUN path from the PV attributes, ensuring copy offload functionality.

MTV-4556

Before this update, shared PersistentVolumeClaims (PVCs) were not labeled Shareable: true during migration with storage offload. As a consequence, shareable disks were not automatically attached to VMs. With this release, shared PVCs have the Shareable: true label, and shared disks are correctly attached to VMs.

MTV-4580

Before this update, warm migration with SATA CD-ROM and SATA disks failed because of incorrect disk assignment. With this release, the SATA CD-ROM disks are intentionally skipped during warm migration because these disks are not migrated, resulting in successful conversion.

MTV-4592

Before this update, there were disk order inconsistencies in the virt-v2v-inspector because of a conflict in how libvirt and VMware order the disks. As a consequence, users experienced unpredictable boot failures during VM conversion. With this release, the virt-v2v-inspector presents disks in a consistent order, reducing conversion failures in multi-boot VMs.

MTV-4718

MTV 2.11.0 was rebased to Red Hat Enterprise Linux (RHEL) 10, which does not support XFS version 4 (XFSv4). As a result, a new spec.xfsCompatibility option is available on the migration plan. When set to false, the default setting, the plan uses the standard conversion image. When set to true, the plan uses the XFS-compatible conversion image instead of the standard conversion image.

MTV-4685 and MTV-4709

Before this update, during VM migration to Red Hat OpenShift Container Platform with Fibre Channel, migration could stall when target namespaces lacked permission to transfer networks. This update enhances error handling with active blocking of migration when target namespaces lack transfer network permissions.

MTV-4547

Before this update, during cross-cluster live migration, projects were fetched from the host cluster instead of the target cluster. As a consequence, target cluster namespaces were not visible in the UI, causing user inconvenience. With this release, cross-cluster live migration fetches project data from the target cluster, making target cluster namespaces visible in the UI during migration.

MTV-3915

Before this update, VMware Virtual Disk Development Kit (VDDK) image archive upload failure occurred in private namespaces due to incorrect namespace usage. As a consequence, users experienced VDDK image upload failure in private namespaces during source provider creation. With this release, you can upload VDDK tar archives successfully in private namespaces.

MTV-3618

Before this update, if you changed the Migration type on the Plan details page from warm to cold, the MTV user interface (UI) did not refresh, even though the YAML file was updated correctly. As a consequence, the UI did not display the updated migration type. With this release, MTV updates the migration type in both the YAML file and the UI. As a result, the UI correctly displays the updated migration type.

MTV-3476

Before this update, during the migration of a VM with a non-conformant name in OpenShift, the name was standardized. However, the migration progress in the MTV UI showed the original non-conformant VM name. As a consequence, users saw incorrect VM names in the Migration progress list, with links causing 404 errors. With this release, the migration progress now shows accurate VM names and links.

MTV-4386

Before this update, users encountered an Unable to retrieve data error during VM listing in cold migration plans created with static IP preservation on vCenter7. With this release, cold migration plans now retrieve VM data correctly, eliminating Unable to retrieve data errors.

MTV-3266

Before this update, the warm migration progress indicator for DiskTransfer remained unchecked due to incomplete progress evaluation. As a consequence, users saw incomplete migration progress for the DiskTransfer step. With this release, the DiskTransfer progress indicator shows a checkmark when all tasks are completed, improving migration visibility.

MTV-3585

Before this update, you could not fetch and populate volumes for storage mappings from Red Hat OpenShift during plan creation for an OpenShift provider. With this release, plan creation for host-to-host plans includes fetching and populating source storage, improving the selection of storage mappings during plan creation.

MTV-3574

Before this update, incorrect management of network attachments in Red Hat OpenShift target networks during updates led to complications with network mapping during live migration, resulting in inaccurate network configurations. With this release, the target network mapping issue in MTV for an OpenShift source provider is resolved. As a result, cluster-to-cluster live migration now correctly maps networks, improving migration accuracy.

MTV-3576

Before this update, users received a misleading message about VM shutdown during Open Virtual Appliance (OVA) migration, even though no VMs are sourced for OVA providers. With this release, the incorrect message for OVA providers during plan migration is removed.

MTV-3572

Before this update, the Tips and tricks link placement in the upper-right corner of the MTV UI conflicted with reserved UI elements. As a consequence, UI elements were misaligned, causing content shift and potential confusion. With this release, the Tips and tricks link is displayed to the left side of the reserved UI element. As a result, the UI now has improved consistency.

MTV-3870

Before this update, the topic selector in the Tips and tricks panel in the MTV UI displayed the active topic while it was pointing to the active topic. As a consequence, end users saw duplicate topic headings in the topic selector and the top area of the Tips and tricks panel. With this release, the topic selector defaults to No topic selected, enhancing the overall UI consistency.

MTV-3869

Before this update, the Migration plans page in the MTV UI displayed the openshift-mtv project by default, but the target project was not displayed by default. With this update, the default view of the Migration plans page now includes the Target project column, enhancing visibility and navigation for migration plans.

MTV-3864

Before this update, the removal of the Target name column during MTV product updates caused the column to disappear from the Virtual machines tab on the Plan details page in the MTV UI. With this release, the Target name column on the Virtual machines tab is now restored.

MTV-4238

Before this update, the MTV UI became unresponsive when trying to remove an invalid Network Attachment Definition (NAD) during network map creation from YAML. With this release, you can remove network maps with invalid NAD IDs and manage network maps more effectively.

MTV-3610

Before this update, users encountered permission denied errors during OVA file upload. With this release, there is a check for write permissions before OVA upload. As a result, OVA uploads no longer fail due to permission errors.

MTV-3634

Before this update, warm migrations with a Red Hat Virtualization provider failed due to missing support for insecure TLS. As a consequence, warm migration failed with TLS insecure (skip cert validation) in MTV 2.8.5. With this release, InsecureSkipVerify is added to CDI for warm migrations with a RHV provider. As a result, warm migration with TLS insecure (skip cert validation) now succeeds.

MTV-2811

Before this update, warm migrations from VMware vSphere intermittently failed during the Disk transfer phase with a VDDK connection error. With this release, VDDK connection processing is improved, with warm migrations from VMware vSphere now completing successfully during the disk transfer phase.

MTV-3514

Before this update, MTV did not recognize the VirtualPCNet32 network type in VMware during migration. As a consequence, legacy RHEL 5 32-bit VMs were migrated without network interfaces, causing connectivity issues for users. With this release, MTV supports VirtualPCNet32 NICs and detects 32-bit RHEL5 VMs with the VirtualPCNet32 network type, enhancing network interface visibility during migration.

MTV-3796

Before this update, NVMe disk support was missing for VMware vSphere VM migration, meaning NVMe migration could be successful but not validated. With this update, NVMe disk support is added for successful NVMe migration and validation from VMware vSphere.

MTV-2444

Before this update, VM migration failure occurred when multiple interfaces were connected to a pod network in OpenShift Virtualization. With this release, MTV now supports multiple interfaces per VM.

MTV-2666

Before this update, OVA migration left orphaned ova-store-pvc-* PVCs on target clusters, consuming resources. As a consequence, excess OVA-store PVCs could cause potential resource exhaustion for users. With this update, OVA migration no longer leaves leftover PVCs on target clusters, improving resource utilization and reducing potential data loss.

MTV-3659

Before this update, the migration of VMs with DHCP settings from an OVA provider to an OpenShift cluster resulted in the loss of interface settings in the VM YAML file. This caused only one default interface with a pod network to remain in the VM. As a consequence, users experienced VMs with incorrect interface settings after migration. The issue occurred because the OVA scanner identified NICs and other device types based on the display name, which was unreliable. With this update, device identification is based on the resource type provided in the OVF specification, preserving interface settings during migration and preventing incorrect configurations.

MTV-3654