Clusters
Cluster management
Abstract
Chapter 1. Cluster lifecycle with multicluster engine operator overview
The multicluster engine operator is the cluster lifecycle operator that provides cluster management capabilities for OpenShift Container Platform and Red Hat Advanced Cluster Management hub clusters. From the hub cluster, you can create and manage clusters, as well as destroy any clusters that you created. You can also hibernate, resume, and detach clusters.
The multicluster engine operator is the cluster lifecycle operator that provides cluster management capabilities for Red Hat OpenShift Container Platform and Red Hat Advanced Cluster Management hub clusters. If you installed Red Hat Advanced Cluster Management, you do not need to install multicluster engine operator, as it is automatically installed.
Information:
- Your cluster is created by using the OpenShift Container Platform cluster installer with the Hive resource. You can find more information about the process of installing OpenShift Container Platform clusters at Installing and configuring OpenShift Container Platform clusters in the OpenShift Container Platform documentation.
- With your OpenShift Container Platform cluster, you can use multicluster engine operator as a standalone cluster manager for cluster lifecycle function, or you can use it as part of a Red Hat Advanced Cluster Management hub cluster.
- If you are using OpenShift Container Platform only, the operator is included with subscription. Visit About multicluster engine for Kubernetes operator from the OpenShift Container Platform documentation.
- If you subscribe to Red Hat Advanced Cluster Management, you also receive the operator with installation. You can create, manage, and monitor other Kubernetes clusters with the Red Hat Advanced Cluster Management hub cluster.
- Release images are the version of OpenShift Container Platform that you use when you create a cluster. For clusters that are created using Red Hat Advanced Cluster Management, you can enable automatic upgrading of your release images. For more information about release images in Red Hat Advanced Cluster Management, see Release images.
- With hosted control planes for OpenShift Container Platform, you can create control planes as pods on a hosting cluster without the need for dedicated physical machines for each control plane. See the Hosted control planes overview in the OpenShift Container Platform documentation.
Important If you are using multicluster engine operator 2.6 and earlier, the hosted control planes documentation is located in the Red Hat Advanced Cluster Management product documentation. See Red Hat Advanced Cluster Management Hosted control planes.
- Cluster lifecycle architecture
- Release notes for Cluster lifecycle with multicluster engine operator
- Installing and upgrading multicluster engine operator
- Console overview
- multicluster engine for Kubernetes operator Role-based access control
- Network configuration
- Managing credentials
- Cluster lifecycle introduction
- Release images
- Discovery service introduction
- APIs
- Troubleshooting
1.1. Console overview
OpenShift Container Platform console plug-ins are available with the OpenShift Container Platform web console and can be integrated. To use this feature, the console plug-ins must remain enabled. The multicluster engine operator displays certain console features from Infrastructure and Credentials navigation items. If you install Red Hat Advanced Cluster Management, you see more console capability.
Note: With the plug-ins enabled, you can access Red Hat Advanced Cluster Management within the OpenShift Container Platform console from the cluster switcher by selecting All Clusters from the drop-down menu.
- To disable the plug-in, be sure you are in the Administrator perspective in the OpenShift Container Platform console.
- Find Administration in the navigation and click Cluster Settings, then click Configuration tab.
-
From the list of Configuration resources, click the Console resource with the
operator.openshift.io
API group, which contains cluster-wide configuration for the web console. -
Click on the Console plug-ins tab. The
mce
plug-in is listed. Note: If Red Hat Advanced Cluster Management is installed, it is also listed asacm
. - Modify plug-in status from the table. In a few moments, you are prompted to refresh the console.
1.2. multicluster engine operator role-based access control
RBAC is validated at the console level and at the API level. Actions in the console can be enabled or disabled based on user access role permissions. View the following sections for more information on RBAC for specific lifecycles in the product:
1.2.1. Overview of roles
Some product resources are cluster-wide and some are namespace-scoped. You must apply cluster role bindings and namespace role bindings to your users for consistent access controls. View the table list of the following role definitions that are supported:
1.2.1.1. Table of role definition
Role | Definition |
---|---|
|
This is an OpenShift Container Platform default role. A user with cluster binding to the |
|
A user with cluster binding to the |
|
A user with cluster binding to the |
|
A user with cluster binding to the |
|
A user with cluster binding to the |
|
A user with cluster binding to the |
|
Admin, edit, and view are OpenShift Container Platform default roles. A user with a namespace-scoped binding to these roles has access to |
Important:
- Any user can create projects from OpenShift Container Platform, which gives administrator role permissions for the namespace.
-
If a user does not have role access to a cluster, the cluster name is not visible. The cluster name is displayed with the following symbol:
-
.
RBAC is validated at the console level and at the API level. Actions in the console can be enabled or disabled based on user access role permissions. View the following sections for more information on RBAC for specific lifecycles in the product.
1.2.2. Cluster lifecycle RBAC
View the following cluster lifecycle RBAC operations:
Create and administer cluster role bindings for all managed clusters. For example, create a cluster role binding to the cluster role
open-cluster-management:cluster-manager-admin
by entering the following command:oc create clusterrolebinding <role-binding-name> --clusterrole=open-cluster-management:cluster-manager-admin --user=<username>
This role is a super user, which has access to all resources and actions. You can create cluster-scoped
managedcluster
resources, the namespace for the resources that manage the managed cluster, and the resources in the namespace with this role. You might need to add theusername
of the ID that requires the role association to avoid permission errors.Run the following command to administer a cluster role binding for a managed cluster named
cluster-name
:oc create clusterrolebinding (role-binding-name) --clusterrole=open-cluster-management:admin:<cluster-name> --user=<username>
This role has read and write access to the cluster-scoped
managedcluster
resource. This is needed because themanagedcluster
is a cluster-scoped resource and not a namespace-scoped resource.Create a namespace role binding to the cluster role
admin
by entering the following command:oc create rolebinding <role-binding-name> -n <cluster-name> --clusterrole=admin --user=<username>
This role has read and write access to the resources in the namespace of the managed cluster.
Create a cluster role binding for the
open-cluster-management:view:<cluster-name>
cluster role to view a managed cluster namedcluster-name
Enter the following command:oc create clusterrolebinding <role-binding-name> --clusterrole=open-cluster-management:view:<cluster-name> --user=<username>
This role has read access to the cluster-scoped
managedcluster
resource. This is needed because themanagedcluster
is a cluster-scoped resource.Create a namespace role binding to the cluster role
view
by entering the following command:oc create rolebinding <role-binding-name> -n <cluster-name> --clusterrole=view --user=<username>
This role has read-only access to the resources in the namespace of the managed cluster.
View a list of the managed clusters that you can access by entering the following command:
oc get managedclusters.clusterview.open-cluster-management.io
This command is used by administrators and users without cluster administrator privileges.
View a list of the managed cluster sets that you can access by entering the following command:
oc get managedclustersets.clusterview.open-cluster-management.io
This command is used by administrators and users without cluster administrator privileges.
1.2.2.1. Cluster pools RBAC
View the following cluster pool RBAC operations:
As a cluster administrator, use cluster pool provision clusters by creating a managed cluster set and grant administrator permission to roles by adding the role to the group. View the following examples:
Grant
admin
permission to theserver-foundation-clusterset
managed cluster set with the following command:oc adm policy add-cluster-role-to-group open-cluster-management:clusterset-admin:server-foundation-clusterset server-foundation-team-admin
Grant
view
permission to theserver-foundation-clusterset
managed cluster set with the following command:oc adm policy add-cluster-role-to-group open-cluster-management:clusterset-view:server-foundation-clusterset server-foundation-team-user
Create a namespace for the cluster pool,
server-foundation-clusterpool
. View the following examples to grant role permissions:Grant
admin
permission toserver-foundation-clusterpool
for theserver-foundation-team-admin
by running the following commands:oc adm new-project server-foundation-clusterpool oc adm policy add-role-to-group admin server-foundation-team-admin --namespace server-foundation-clusterpool
As a team administrator, create a cluster pool named
ocp46-aws-clusterpool
with a cluster set label,cluster.open-cluster-management.io/clusterset=server-foundation-clusterset
in the cluster pool namespace:-
The
server-foundation-webhook
checks if the cluster pool has the cluster set label, and if the user has permission to create cluster pools in the cluster set. -
The
server-foundation-controller
grantsview
permission to theserver-foundation-clusterpool
namespace forserver-foundation-team-user
.
-
The
When a cluster pool is created, the cluster pool creates a
clusterdeployment
. Continue reading for more details:-
The
server-foundation-controller
grantsadmin
permission to theclusterdeployment
namespace forserver-foundation-team-admin
. The
server-foundation-controller
grantsview
permissionclusterdeployment
namespace forserver-foundation-team-user
.Note: As a
team-admin
andteam-user
, you haveadmin
permission to theclusterpool
,clusterdeployment
, andclusterclaim
.
-
The
1.2.2.2. Console and API RBAC table for cluster lifecycle
View the following console and API RBAC tables for cluster lifecycle:
Resource | Admin | Edit | View |
---|---|---|---|
Clusters | read, update, delete | - | read |
Cluster sets | get, update, bind, join | edit role not mentioned | get |
Managed clusters | read, update, delete | no edit role mentioned | get |
Provider connections | create, read, update, and delete | - | read |
API | Admin | Edit | View |
---|---|---|---|
You can use | create, read, update, delete | read, update | read |
You can use | read | read | read |
| update | update | |
You can use | create, read, update, delete | read, update | read |
| read | read | read |
You can use | create, read, update, delete | read, update | read |
| create, read, update, delete | read, update | read |
| create, read, update, delete | read, update | read |
| create, read, update, delete | read, update | read |
| create, read, update, delete | read, update | read |
| create, read, update, delete | read, update | read |
| create, read, update, delete | read, update | read |
| create, read, update, delete | read, update | read |
1.2.2.3. Credentials role-based access control
The access to credentials is controlled by Kubernetes. Credentials are stored and secured as Kubernetes secrets. The following permissions apply to accessing secrets in Red Hat Advanced Cluster Management for Kubernetes:
- Users with access to create secrets in a namespace can create credentials.
- Users with access to read secrets in a namespace can also view credentials.
-
Users with the Kubernetes cluster roles of
admin
andedit
can create and edit secrets. -
Users with the Kubernetes cluster role of
view
cannot view secrets because reading the contents of secrets enables access to service account credentials.
1.3. Network configuration
Configure your network settings to allow the connections.
Important: The trusted CA bundle is available in the multicluster engine operator namespace, but that enhancement requires changes to your network. The trusted CA bundle ConfigMap uses the default name of trusted-ca-bundle
. You can change this name by providing it to the operator in an environment variable named TRUSTED_CA_BUNDLE
. See Configuring the cluster-wide proxy in the Networking section of Red Hat OpenShift Container Platform for more information.
Note: Registration Agent
and Work Agent
on the managed cluster do not support proxy settings because they communicate with apiserver
on the hub cluster by establishing an mTLS connection, which cannot pass through the proxy.
For the multicluster engine operator cluster networking requirements, see the following table:
Direction | Protocol | Connection | Port (if specified) |
---|---|---|---|
Outbound | Kubernetes API server of the provisioned managed cluster | 6443 | |
Outbound from the OpenShift Container Platform managed cluster to the hub cluster | TCP | Communication between the Ironic Python Agent and the bare metal operator on the hub cluster | 6180, 6183, 6385, and 5050 |
Outbound from the hub cluster to the Ironic Python Agent on the managed cluster | TCP | Communication between the bare metal node where the Ironic Python Agent is running and the Ironic conductor service | 9999 |
Outbound and inbound |
The | 443 | |
Inbound | The Kubernetes API server of the multicluster engine for Kubernetes operator cluster from the managed cluster | 6443 |
Note: The managed cluster must be able to reach the hub cluster control plane node IP addresses.
1.4. Release notes for Cluster lifecycle with multicluster engine operator
Learn about new features and enhancements, support, deprecations, removals, and Errata bug fixes.
- What’s new for Cluster lifecycle with multicluster engine operator
- Errata updates for Cluster lifecycle with multicluster engine operator
- Known issues and limitations for Cluster lifecycle with multicluster engine operator
- Deprecations and removals for Cluster lifecycle with multicluster engine operator
Important: OpenShift Container Platform release notes are not documented in this product documentation. For your OpenShift Container Platform cluster, see OpenShift Container Platform release notes.
Deprecated: multicluster engine operator 2.2 and earlier versions are no longer supported. The documentation might remain available, but without any Errata or other updates.
Best practice: Upgrade to the most recent version.
- The documentation references the earliest supported OpenShift Container Platform version, unless a specific component or function is introduced and tested only on a more recent version of OpenShift Container Platform.
- For full support information, see the multicluster engine operator Support matrix. For lifecycle information, see Red Hat OpenShift Container Platform Life Cycle policy.
- If you experience issues with one of the currently supported releases, or the product documentation, go to Red Hat Support where you can troubleshoot, view Knowledgebase articles, connect with the Support Team, or open a case. You must log in with your credentials.
- You can also learn more about the Customer Portal documentation at Red Hat Customer Portal FAQ.
1.4.1. What’s new for Cluster lifecycle with multicluster engine operator
Learn about new features for creating, importing, managing, and destroying Kubernetes clusters across various infrastructure cloud providers, private clouds, and on-premises data centers.
For full support information, see the multicluster engine operator Support matrix. For lifecycle information, see Red Hat OpenShift Container Platform Life Cycle policy.
Important: Cluster management now supports all providers that are certified through the Cloud Native Computing Foundation (CNCF) Kubernetes Conformance Program. Choose a vendor that is recognized by CNFC for your hybrid cloud multicluster management.
See the following information about using CNFC providers:
- Learn how CNFC providers are certified at Certified Kubernetes Conformance.
- For Red Hat support information about CNFC third-party providers, see Red Hat support with third party components, or Contact Red Hat support.
-
If you bring your own CNFC conformance certified cluster, you need to change the OpenShift Container Platform CLI
oc
command to the Kubernetes CLI command,kubectl
.
1.4.1.1. New features and enhancements for components
Learn more about new features for specific components.
Note: Some features and components are identified and released as Technology Preview.
Important: The hosted control planes documentation is now located in the OpenShift Container Platform documentation. See the Hosted control planes overview in the OpenShift Container Platform documentation.
If you are using multicluster engine operator 2.6 and earlier, the hosted control planes documentation is located in the Red Hat Advanced Cluster Management product documentation. See Red Hat Advanced Cluster Management Hosted control planes.
1.4.1.2. Cluster management
Learn about new features and enhancements for Cluster lifecycle with multicluster engine operator.
-
You can now set a duration to choose when the
kubeconfig
bootstrap in the klusterlet manifest expires. To learn more, see Importing a cluster. - You can now import all cluster resources and continue using them after moving a managed cluster that was installed by the Assisted Installer from one hub cluster to another hub cluster. To learn more, see Importing cluster resources.
- You can now connect to OpenShift Cluster Manager with Service Account credentials. To learn more, see Creating a credential for Red Hat OpenShift Cluster Manager.
- You can now specify the CA bundle when importing a managed cluster. To learn more, see Customizing the server URL and CA bundle of the hub cluster API server when importing a managed cluster (Technology Preview).
1.4.2. Errata updates for Cluster lifecycle with multicluster engine operator
For multicluster engine operator, the Errata updates are automatically applied when released.
If no release notes are listed, the product does not have an Errata release at this time.
Important: For reference, Jira links and Jira numbers might be added to the content and used internally. Links that require access might not be available for the user.
1.4.3. Known issues and limitations for Cluster lifecycle with multicluster engine operator
Review the known issues and limitations for Cluster lifecycle with multicluster engine operator for this release, or known issues that continued from the previous release.
Cluster management known issues and limitations are part of the Cluster lifecycle with multicluster engine operator documentation. Known issues for {mce-short) integrated with Red Hat Advanced Cluster Management are documented in the Release notes for Red Hat Advanced Cluster Management.
Important: OpenShift Container Platform release notes are not documented in this product documentation. For your OpenShift Container Platform cluster, see OpenShift Container Platform release notes.
1.4.3.1. Installation
Learn about known issues and limitations during multicluster engine operator installation.
1.4.3.1.1. Status stuck when installing on OpenShift Service on AWS with hosted control plane cluster
Installation status might get stuck in the Installing
state when you install multicluster engine operator on a OpenShift Service on AWS with hosted control planes cluster. The local-cluster
might also remain in the Unknown
state.
When you check the klusterlet-agent
pod log in the open-cluster-management-agent
namespace on your hub cluster, you see an error that resembles the following:
E0809 18:45:29.450874 1 reflector.go:147] k8s.io/client-go@v0.29.4/tools/cache/reflector.go:229: Failed to watch *v1.CertificateSigningRequest: failed to list *v1.CertificateSigningRequest: Get "https://api.xxx.openshiftapps.com:443/apis/certificates.k8s.io/v1/certificatesigningrequests?limit=500&resourceVersion=0": tls: failed to verify certificate: x509: certificate signed by unknown authority
To resolve the problem, configure the hub cluster API server verification strategy. Complete the following steps:
-
Create a
KlusterletConfig
resource with nameglobal
if it does not exist. Set the
spec.hubKubeAPIServerConfig.serverVerificationStrategy
toUseSystemTruststore
. See the following example:apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: global spec: hubKubeAPIServerConfig: serverVerificationStrategy: UseSystemTruststore
Apply the resource by running the following command on the hub cluster. Replace
<filename>
with the name of your file:oc apply -f <filename>
If the
local-cluster
state does not recover in one minute, export and decode theimport.yaml
file by running the following command on the hub cluster:oc get secret local-cluster-import -n local-cluster -o jsonpath={.data.import\.yaml} | base64 --decode > import.yaml
Apply the file by running the following command on the hub cluster:
oc apply -f import.yaml
1.4.3.1.2. installNamespace field can only have one value
When enabling the managed-serviceaccount
add-on, the installNamespace
field in the ManagedClusterAddOn
resource must have open-cluster-management-agent-addon
as the value. Other values are ignored. The managed-serviceaccount
add-on agent is always deployed in the open-cluster-management-agent-addon
namespace on the managed cluster.
1.4.3.2. Cluster
Learn about known issues and limitations for Cluster lifecycle with multicluster engine operator, such as issues with creating, discovering, importing, and removing clusters, and more cluster management issues for multicluster engine operator.
1.4.3.2.1. Limitation with nmstate
Develop quicker by configuring copy and paste features. To configure the copy-from-mac
feature in the assisted-installer
, you must add the mac-address
to the nmstate
definition interface and the mac-mapping
interface. The mac-mapping
interface is provided outside the nmstate
definition interface. As a result, you must provide the same mac-address
twice.
If you have a different version of VolSync installed, replace v0.6.0
with your installed version.
1.4.3.2.2. Deleting a managed cluster set does not automatically remove its label
After you delete a ManagedClusterSet
, the label that is added to each managed cluster that associates the cluster to the cluster set is not automatically removed. Manually remove the label from each of the managed clusters that were included in the deleted managed cluster set. The label resembles the following example: cluster.open-cluster-management.io/clusterset:<ManagedClusterSet Name>
.
1.4.3.2.3. ClusterClaim error
If you create a Hive ClusterClaim
against a ClusterPool
and manually set the ClusterClaimspec
lifetime field to an invalid golang time value, the product stops fulfilling and reconciling all ClusterClaims
, not just the malformed claim.
You see the following error in the clusterclaim-controller
pod logs, which is a specific example with the PoolName
and invalid lifetime
included:
E0203 07:10:38.266841 1 reflector.go:138] sigs.k8s.io/controller-runtime/pkg/cache/internal/informers_map.go:224: Failed to watch *v1.ClusterClaim: failed to list *v1.ClusterClaim: v1.ClusterClaimList.Items: []v1.ClusterClaim: v1.ClusterClaim.v1.ClusterClaim.Spec: v1.ClusterClaimSpec.Lifetime: unmarshalerDecoder: time: unknown unit "w" in duration "1w", error found in #10 byte of ...|time":"1w"}},{"apiVe|..., bigger context ...|clusterPoolName":"policy-aas-hubs","lifetime":"1w"}},{"apiVersion":"hive.openshift.io/v1","kind":"Cl|...
You can delete the invalid claim.
If the malformed claim is deleted, claims begin successfully reconciling again without any further interaction.
1.4.3.2.4. The product channel out of sync with provisioned cluster
The clusterimageset
is in fast
channel, but the provisioned cluster is in stable
channel. Currently the product does not sync the channel
to the provisioned OpenShift Container Platform cluster.
Change to the right channel in the OpenShift Container Platform console. Click Administration > Cluster Settings > Details Channel.
1.4.3.2.5. Selecting a subnet is required when creating an on-premises cluster
When you create an on-premises cluster using the console, you must select an available subnet for your cluster. It is not marked as a required field.
1.4.3.2.6. Cluster provision with Ansible automation fails in proxy environment
An Automation template that is configured to automatically provision a managed cluster might fail when both of the following conditions are met:
- The hub cluster has cluster-wide proxy enabled.
- The Ansible Automation Platform can only be reached through the proxy.
1.4.3.2.7. Cannot delete managed cluster namespace manually
You cannot delete the namespace of a managed cluster manually. The managed cluster namespace is automatically deleted after the managed cluster is detached. If you delete the managed cluster namespace manually before the managed cluster is detached, the managed cluster shows a continuous terminating status after you delete the managed cluster. To delete this terminating managed cluster, manually remove the finalizers from the managed cluster that you detached.
1.4.3.2.8. Automatic secret updates for provisioned clusters is not supported
When you change your cloud provider access key on the cloud provider side, you also need to update the corresponding credential for this cloud provider on the console of multicluster engine operator. This is required when your credentials expire on the cloud provider where the managed cluster is hosted and you try to delete the managed cluster.
1.4.3.2.9. Process to destroy a cluster does not complete
When you destroy a managed cluster, the status continues to display Destroying
after one hour, and the cluster is not destroyed. To resolve this issue complete the following steps:
- Manually ensure that there are no orphaned resources on your cloud, and that all of the provider resources that are associated with the managed cluster are cleaned up.
Open the
ClusterDeployment
information for the managed cluster that is being removed by entering the following command:oc edit clusterdeployment/<mycluster> -n <namespace>
Replace
mycluster
with the name of the managed cluster that you are destroying.Replace
namespace
with the namespace of the managed cluster.-
Remove the
hive.openshift.io/deprovision
finalizer to forcefully stop the process that is trying to clean up the cluster resources in the cloud. -
Save your changes and verify that
ClusterDeployment
is gone. Manually remove the namespace of the managed cluster by running the following command:
oc delete ns <namespace>
Replace
namespace
with the namespace of the managed cluster.
1.4.3.2.10. Cannot upgrade OpenShift Container Platform managed clusters on OpenShift Container Platform Dedicated with the console
You cannot use the Red Hat Advanced Cluster Management console to upgrade OpenShift Container Platform managed clusters that are in the OpenShift Container Platform Dedicated environment.
1.4.3.2.11. Work manager add-on search details
The search details page for a certain resource on a certain managed cluster might fail. You must ensure that the work-manager add-on in the managed cluster is in Available
status before you can search.
1.4.3.2.12. Non-OpenShift Container Platform managed clusters require ManagedServiceAccount or LoadBalancer for pod logs
The ManagedServiceAccount
and cluster proxy add-ons are enabled by default in Red Hat Advanced Cluster Management version 2.10 and newer. If the add-ons are disabled after upgrading, you must enable the ManagedServiceAccount
and cluster proxy add-ons manually to use the pod log feature on non-OpenShift Container Platform managed clusters.
See ManagedServiceAccount add-on to learn how to enable ManagedServiceAccount
and see Using cluster proxy add-ons to learn how to enable a cluster proxy add-on.
1.4.3.2.13. OpenShift Container Platform 4.10.z does not support hosted control plane clusters with proxy configuration
When you create a hosting service cluster with a cluster-wide proxy configuration on OpenShift Container Platform 4.10.z, the nodeip-configuration.service
service does not start on the worker nodes.
1.4.3.2.14. Client cannot reach iPXE script
iPXE is an open source network boot firmware. See iPXE for more details.
When booting a node, the URL length limitation in some DHCP servers cuts off the ipxeScript
URL in the InfraEnv
custom resource definition, resulting in the following error message in the console:
no bootable devices
To work around the issue, complete the following steps:
Apply the
InfraEnv
custom resource definition when using an assisted installation to expose thebootArtifacts
, which might resemble the following file:status: agentLabelSelector: matchLabels: infraenvs.agent-install.openshift.io: qe2 bootArtifacts: initrd: https://assisted-image-service-multicluster-engine.redhat.com/images/0000/pxe-initrd?api_key=0000000&arch=x86_64&version=4.11 ipxeScript: https://assisted-service-multicluster-engine.redhat.com/api/assisted-install/v2/infra-envs/00000/downloads/files?api_key=000000000&file_name=ipxe-script kernel: https://mirror.openshift.com/pub/openshift-v4/x86_64/dependencies/rhcos/4.12/latest/rhcos-live-kernel-x86_64 rootfs: https://mirror.openshift.com/pub/openshift-v4/x86_64/dependencies/rhcos/4.12/latest/rhcos-live-rootfs.x86_64.img
-
Create a proxy server to expose the
bootArtifacts
with short URLs. Copy the
bootArtifacts
and add them them to the proxy by running the following commands:for artifact in oc get infraenv qe2 -ojsonpath="{.status.bootArtifacts}" | jq ". | keys[]" | sed "s/\"//g" do curl -k oc get infraenv qe2 -ojsonpath="{.status.bootArtifacts.${artifact}}"` -o $artifact
-
Add the
ipxeScript
artifact proxy URL to thebootp
parameter inlibvirt.xml
.
1.4.3.2.15. Cannot delete ClusterDeployment after upgrading Red Hat Advanced Cluster Management
If you are using the removed BareMetalAssets API in Red Hat Advanced Cluster Management 2.6, the ClusterDeployment
cannot be deleted after upgrading to Red Hat Advanced Cluster Management 2.7 because the BareMetalAssets API is bound to the ClusterDeployment
.
To work around the issue, run the following command to remove the finalizers
before upgrading to Red Hat Advanced Cluster Management 2.7:
oc patch clusterdeployment <clusterdeployment-name> -p '{"metadata":{"finalizers":null}}' --type=merge
1.4.3.2.16. Managed cluster stuck in Pending status after deployment
The converged flow is the default process of provisioning. When you use the BareMetalHost
resource for the Bare Metal Operator (BMO) to connect your host to a live ISO, the Ironic Python Agent does the following actions:
- It runs the steps in the Bare Metal installer-provisioned-infrastructure.
- It starts the Assisted Installer agent, and the agent handles the rest of the install and provisioning process.
If the Assisted Installer agent starts slowly and you deploy a managed cluster, the managed cluster might become stuck in the Pending
status and not have any agent resources. You can work around the issue by disabling the converged flow.
Important: When you disable the converged flow, only the Assisted Installer agent runs in the live ISO, reducing the number of open ports and disabling any features you enabled with the Ironic Python Agent agent, including the following:
- Pre-provisioning disk cleaning
- iPXE boot firmware
- BIOS configuration
To decide what port numbers you want to enable or disable without disabling the converged flow, see Network configuration.
To disable the converged flow, complete the following steps:
Create the following ConfigMap on the hub cluster:
apiVersion: v1 kind: ConfigMap metadata: name: my-assisted-service-config namespace: multicluster-engine data: ALLOW_CONVERGED_FLOW: "false" 1
- 1
- When you set the parameter value to "false", you also disable any features enabled by the Ironic Python Agent.
Apply the ConfigMap by running the following command:
oc annotate --overwrite AgentServiceConfig agent unsupported.agent-install.openshift.io/assisted-service-configmap=my-assisted-service-config
1.4.3.2.17. ManagedClusterSet API specification limitation
The selectorType: LaberSelector
setting is not supported when using the Clustersets API. The selectorType: ExclusiveClusterSetLabel
setting is supported.
1.4.3.2.18. The Cluster curator does not support OpenShift Container Platform Dedicated clusters
When you upgrade an OpenShift Container Platform Dedicated cluster by using the ClusterCurator
resource, the upgrade fails because the Cluster curator does not support OpenShift Container Platform Dedicated clusters.
1.4.3.2.19. Custom ingress domain is not applied correctly
You can specify a custom ingress domain by using the ClusterDeployment
resource while installing a managed cluster, but the change is only applied after the installation by using the SyncSet
resource. As a result, the spec
field in the clusterdeployment.yaml
file displays the custom ingress domain you specified, but the status
still displays the default domain.
1.4.3.3. Central infrastructure management
1.4.3.3.1. Cluster provisioning with infrastructure operator for Red Hat OpenShift fails
When creating OpenShift Container Platform clusters by using the infrastructure operator for Red Hat OpenShift, the file name of the ISO image might be too long. The long image name causes the image provisioning and the cluster provisioning to fail. To determine if this is the problem, complete the following steps:
View the bare metal host information for the cluster that you are provisioning by running the following command:
oc get bmh -n <cluster_provisioning_namespace>
Run the
describe
command to view the error information:oc describe bmh -n <cluster_provisioning_namespace> <bmh_name>
An error similar to the following example indicates that the length of the filename is the problem:
Status: Error Count: 1 Error Message: Image provisioning failed: ... [Errno 36] File name too long ...
If this problem occurs, it is typically on the following versions of OpenShift Container Platform, because the infrastructure operator for Red Hat OpenShift was not using image service:
- 4.8.17 and earlier
- 4.9.6 and earlier
To avoid this error, upgrade your OpenShift Container Platform to version 4.8.18 or later, or 4.9.7 or later.
1.4.3.3.2. Cannot use host inventory to boot with the discovery image and add hosts automatically
You cannot use a host inventory, or InfraEnv
custom resource, to both boot with the discovery image and add hosts automatically. If you used your previous InfraEnv
resource for the BareMetalHost
resource, and you want to boot the image yourself, you can work around the issue by creating a new InfraEnv
resource.
1.4.3.3.3. A single-node OpenShift cluster installation requires a matching OpenShift Container Platform with infrastructure operator for Red Hat OpenShift
If you want to install a single-node OpenShift cluster with an Red Hat OpenShift Container Platform version before 4.16, your InfraEnv
custom resource and your booted host must use the same OpenShift Container Platform version that you are using to install the single-node OpenShift cluster. The installation fails if the versions do not match.
To work around the issue, edit your InfraEnv
resource before you boot a host with the Discovery ISO, and include the following content:
apiVersion: agent-install.openshift.io/v1beta1 kind: InfraEnv spec: osImageVersion: 4.15
The osImageVersion
field must match the Red Hat OpenShift Container Platform cluster version that you want to install.
1.4.3.3.4. tolerations and nodeSelector settings do not affect the managed-serviceaccount agent
The tolerations
and nodeSelector
settings configured on the MultiClusterEngine
and MultiClusterHub
resources do not affect the managed-serviceaccount
agent deployed on the local cluster. The managed-serviceaccount
add-on is not always required on the local cluster.
If the managed-serviceaccount
add-on is required, you can work around the issue by completing the following steps:
-
Create the
addonDeploymentConfig
custom resource. -
Set the
tolerations
andnodeSelector
values for the local cluster andmanaged-serviceaccount
agent. -
Update the
managed-serviceaccount
ManagedClusterAddon
in the local cluster namespace to use theaddonDeploymentConfig
custom resource you created.
See Configuring nodeSelectors and tolerations for klusterlet add-ons to learn more about how to use the addonDeploymentConfig
custom resource to configure tolerations
and nodeSelector
for add-ons.
1.4.4. Deprecations and removals for Cluster lifecycle with multicluster engine operator
Learn when parts of the product are deprecated or removed from multicluster engine operator. Consider the alternative actions in the Recommended action and details, which display in the tables for the current release and for two prior releases. Tables are removed if no entries are added for that section this release.
Deprecated: multicluster engine operator 2.2 and earlier versions are no longer supported. The documentation might remain available, but without any Errata or other updates.
Best practice: Upgrade to the most recent version.
1.4.4.1. API deprecations and removals
multicluster engine operator follows the Kubernetes deprecation guidelines for APIs. See the Kubernetes Deprecation Policy for more details about that policy. multicluster engine operator APIs are only deprecated or removed outside of the following timelines:
-
All
V1
APIs are generally available and supported for 12 months or three releases, whichever is greater. V1 APIs are not removed, but can be deprecated outside of that time limit. -
All
beta
APIs are generally available for nine months or three releases, whichever is greater. Beta APIs are not removed outside of that time limit. -
All
alpha
APIs are not required to be supported, but might be listed as deprecated or removed if it benefits users.
1.4.4.1.1. API deprecations
Product or category | Affected item | Version | Recommended action | More details and links |
---|---|---|---|---|
ManagedServiceAccount |
The | 2.4 |
Use | None |
KlusterletConfig |
The | 2.7 |
Use the | None |
KlusterletConfig |
The | 2.7 |
Use the | None |
KlusterletConfig |
The | 2.7 |
Use the | None |
1.4.4.2. Removals
A removed item is typically function that was deprecated in previous releases and is no longer available in the product. You must use alternatives for the removed function. Consider the alternative actions in the Recommended action and details that are provided in the following table:
Product or category | Affected item | Version | Recommended action | More details and links |
---|---|---|---|---|
Cluster lifecycle | Create cluster on Red Hat Virtualization | 2.6 | None | None |
Cluster lifecycle | Klusterlet Operator Lifecycle Manager Operator | 2.6 | None | None |
1.5. Installing and upgrading multicluster engine operator
The multicluster engine operator is a software operator that enhances cluster fleet management. The multicluster engine operator supportsRed Hat OpenShift Container Platform and Kubernetes cluster lifecycle management across clouds and data centers.
The documentation references the earliest supported OpenShift Container Platform version, unless a specific component or function is introduced and tested only on a more recent version of OpenShift Container Platform.
For full support information, see the multicluster engine operator Support matrix. For life cycle information, see Red Hat OpenShift Container Platform Life Cycle policy.
Important: If you are using Red Hat Advanced Cluster Management, then multicluster engine for Kubernetes operator is already installed on the cluster.
Deprecated: multicluster engine operator 2.2 and earlier versions are no longer supported. The documentation might remain available, but without any Errata or other updates.
Best practice: Upgrade to the most recent version.
See the following documentation:
1.5.1. Installing while connected online
The multicluster engine operator is installed with Operator Lifecycle Manager, which manages the installation, upgrade, and removal of the components that encompass the multicluster engine operator.
Required access: Cluster administrator
Important:
-
For OpenShift Container Platform Dedicated environment, you must have
cluster-admin
permissions. By defaultdedicated-admin
role does not have the required permissions to create namespaces in the OpenShift Container Platform Dedicated environment. - By default, the multicluster engine operator components are installed on worker nodes of your OpenShift Container Platform cluster without any additional configuration. You can install multicluster engine operator onto worker nodes by using the OpenShift Container Platform OperatorHub web console interface, or by using the OpenShift Container Platform CLI.
- If you have configured your OpenShift Container Platform cluster with infrastructure nodes, you can install multicluster engine operator onto those infrastructure nodes by using the OpenShift Container Platform CLI with additional resource parameters. See the Installing multicluster engine on infrastructure nodes section for those details.
If you plan to import Kubernetes clusters that were not created by OpenShift Container Platform or multicluster engine for Kubernetes operator, you will need to configure an image pull secret. For information on how to configure an image pull secret and other advanced configurations, see options in the Advanced configuration section of this documentation.
1.5.1.1. Prerequisites
Before you install multicluster engine for Kubernetes operator, see the following requirements:
- Your Red Hat OpenShift Container Platform cluster must have access to the multicluster engine operator in the OperatorHub catalog from the OpenShift Container Platform console.
- You need access to the catalog.redhat.com.
A supported version of OpenShift Container Platform must be deployed in your environment, and you must be logged into with the OpenShift Container Platform CLI. See the following install documentation:
-
Your OpenShift Container Platform command line interface (CLI) must be configured to run
oc
commands. See Getting started with the CLI for information about installing and configuring the OpenShift Container Platform CLI. - Your OpenShift Container Platform permissions must allow you to create a namespace.
- You must have an Internet connection to access the dependencies for the operator.
To install in a OpenShift Container Platform Dedicated environment, see the following:
- You must have the OpenShift Container Platform Dedicated environment configured and running.
-
You must have
cluster-admin
authority to the OpenShift Container Platform Dedicated environment where you are installing the engine.
- If you plan to create managed clusters by using the Assisted Installer that is provided with Red Hat OpenShift Container Platform, see Preparing to install with the Assisted Installer topic in the OpenShift Container Platform documentation for the requirements.
1.5.1.2. Confirm your OpenShift Container Platform installation
You must have a supported OpenShift Container Platform version, including the registry and storage services, installed and working. For more information about installing OpenShift Container Platform, see the OpenShift Container Platform documentation.
- Verify that multicluster engine operator is not already installed on your OpenShift Container Platform cluster. The multicluster engine operator allows only one single installation on each OpenShift Container Platform cluster. Continue with the following steps if there is no installation.
To ensure that the OpenShift Container Platform cluster is set up correctly, access the OpenShift Container Platform web console with the following command:
kubectl -n openshift-console get route console
See the following example output:
console console-openshift-console.apps.new-coral.purple-chesterfield.com console https reencrypt/Redirect None
-
Open the URL in your browser and check the result. If the console URL displays
console-openshift-console.router.default.svc.cluster.local
, set the value foropenshift_master_default_subdomain
when you install OpenShift Container Platform. See the following example of a URL:https://console-openshift-console.apps.new-coral.purple-chesterfield.com
.
You can proceed to install multicluster engine operator.
1.5.1.3. Installing from the OperatorHub web console interface
Best practice: From the Administrator view in your OpenShift Container Platform navigation, install the OperatorHub web console interface that is provided with OpenShift Container Platform.
- Select Operators > OperatorHub to access the list of available operators, and select multicluster engine for Kubernetes operator.
-
Click
Install
. On the Operator Installation page, select the options for your installation:
Namespace:
- The multicluster engine operator engine must be installed in its own namespace, or project.
-
By default, the OperatorHub console installation process creates a namespace titled
multicluster-engine
. Best practice: Continue to use themulticluster-engine
namespace if it is available. -
If there is already a namespace named
multicluster-engine
, select a different namespace.
- Channel: The channel that you select corresponds to the release that you are installing. When you select the channel, it installs the identified release, and establishes that the future errata updates within that release are obtained.
Approval strategy: The approval strategy identifies the human interaction that is required for applying updates to the channel or release to which you subscribed.
- Select Automatic, which is selected by default, to ensure any updates within that release are automatically applied.
- Select Manual to receive a notification when an update is available. If you have concerns about when the updates are applied, this might be best practice for you.
Note: To upgrade to the next minor release, you must return to the OperatorHub page and select a new channel for the more current release.
- Select Install to apply your changes and create the operator.
See the following process to create the MultiClusterEngine custom resource.
- In the OpenShift Container Platform console navigation, select Installed Operators > multicluster engine for Kubernetes.
- Select the MultiCluster Engine tab.
- Select Create MultiClusterEngine.
Update the default values in the YAML file. See options in the MultiClusterEngine advanced configuration section of the documentation.
- The following example shows the default template that you can copy into the editor:
apiVersion: multicluster.openshift.io/v1 kind: MultiClusterEngine metadata: name: multiclusterengine spec: {}
Select Create to initialize the custom resource. It can take up to 10 minutes for the multicluster engine operator engine to build and start.
After the MultiClusterEngine resource is created, the status for the resource is
Available
on the MultiCluster Engine tab.
1.5.1.4. Installing from the OpenShift Container Platform CLI
Create a multicluster engine operator engine namespace where the operator requirements are contained. Run the following command, where
namespace
is the name for your multicluster engine for Kubernetes operator namespace. The value fornamespace
might be referred to as Project in the OpenShift Container Platform environment:oc create namespace <namespace>
Switch your project namespace to the one that you created. Replace
namespace
with the name of the multicluster engine for Kubernetes operator namespace that you created in step 1.oc project <namespace>
Create a YAML file to configure an
OperatorGroup
resource. Each namespace can have only one operator group. Replacedefault
with the name of your operator group. Replacenamespace
with the name of your project namespace. See the following example:apiVersion: operators.coreos.com/v1 kind: OperatorGroup metadata: name: <default> namespace: <namespace> spec: targetNamespaces: - <namespace>
Run the following command to create the
OperatorGroup
resource. Replaceoperator-group
with the name of the operator group YAML file that you created:oc apply -f <path-to-file>/<operator-group>.yaml
Create a YAML file to configure an OpenShift Container Platform Subscription. Your file should look similar to the following example:
apiVersion: operators.coreos.com/v1alpha1 kind: Subscription metadata: name: multicluster-engine spec: sourceNamespace: openshift-marketplace source: redhat-operators channel: stable-2.1 installPlanApproval: Automatic name: multicluster-engine
Note: For installing the multicluster engine for Kubernetes operator on infrastructure nodes, the see Operator Lifecycle Manager Subscription additional configuration section.
Run the following command to create the OpenShift Container Platform Subscription. Replace
subscription
with the name of the subscription file that you created:oc apply -f <path-to-file>/<subscription>.yaml
Create a YAML file to configure the
MultiClusterEngine
custom resource. Your default template should look similar to the following example:apiVersion: multicluster.openshift.io/v1 kind: MultiClusterEngine metadata: name: multiclusterengine spec: {}
Note: For installing the multicluster engine operator on infrastructure nodes, see the MultiClusterEngine custom resource additional configuration section:
Run the following command to create the
MultiClusterEngine
custom resource. Replacecustom-resource
with the name of your custom resource file:oc apply -f <path-to-file>/<custom-resource>.yaml
If this step fails with the following error, the resources are still being created and applied. Run the command again in a few minutes when the resources are created:
error: unable to recognize "./mce.yaml": no matches for kind "MultiClusterEngine" in version "operator.multicluster-engine.io/v1"
Run the following command to get the custom resource. It can take up to 10 minutes for the
MultiClusterEngine
custom resource status to display asAvailable
in thestatus.phase
field after you run the following command:oc get mce -o=jsonpath='{.items[0].status.phase}'
If you are reinstalling the multicluster engine operator and the pods do not start, see Troubleshooting reinstallation failure for steps to work around this problem.
Notes:
-
A
ServiceAccount
with aClusterRoleBinding
automatically gives cluster administrator privileges to multicluster engine operator and to any user credentials with access to the namespace where you install multicluster engine operator.
1.5.1.5. Installing on infrastructure nodes
An OpenShift Container Platform cluster can be configured to contain infrastructure nodes for running approved management components. Running components on infrastructure nodes avoids allocating OpenShift Container Platform subscription quota for the nodes that are running those management components.
After adding infrastructure nodes to your OpenShift Container Platform cluster, follow the Installing from the OpenShift Container Platform CLI instructions and add the following configurations to the Operator Lifecycle Manager Subscription and MultiClusterEngine
custom resource.
1.5.1.5.1. Add infrastructure nodes to the OpenShift Container Platform cluster
Follow the procedures that are described in Creating infrastructure machine sets in the OpenShift Container Platform documentation. Infrastructure nodes are configured with a Kubernetes taint
and label
to keep non-management workloads from running on them.
To be compatible with the infrastructure node enablement provided by multicluster engine operator, ensure your infrastructure nodes have the following taint
and label
applied:
metadata: labels: node-role.kubernetes.io/infra: "" spec: taints: - effect: NoSchedule key: node-role.kubernetes.io/infra
1.5.1.5.2. Operator Lifecycle Manager Subscription additional configuration
Add the following additional configuration before applying the Operator Lifecycle Manager Subscription:
spec: config: nodeSelector: node-role.kubernetes.io/infra: "" tolerations: - key: node-role.kubernetes.io/infra effect: NoSchedule operator: Exists
1.5.1.5.3. MultiClusterEngine custom resource additional configuration
Add the following additional configuration before applying the MultiClusterEngine
custom resource:
spec: nodeSelector: node-role.kubernetes.io/infra: ""
1.5.2. Install on disconnected networks
You might need to install the multicluster engine operator on Red Hat OpenShift Container Platform clusters that are not connected to the Internet. The procedure to install on a disconnected engine requires some of the same steps as the connected installation.
Important: You must install multicluster engine operator on a cluster that does not have Red Hat Advanced Cluster Management for Kubernetes earlier than 2.5 installed. The multicluster engine operator cannot co-exist with Red Hat Advanced Cluster Management for Kubernetes on versions earlier than 2.5 because they provide some of the same management components. It is recommended that you install multicluster engine operator on a cluster that has never previously installed Red Hat Advanced Cluster Management. If you are using Red Hat Advanced Cluster Management for Kubernetes at version 2.5.0 or later then multicluster engine operator is already installed on the cluster with it.
You must download copies of the packages to access them during the installation, rather than accessing them directly from the network during the installation.
1.5.2.1. Prerequisites
You must meet the following requirements before you install The multicluster engine operator:
- A supported OpenShift Container Platform version must be deployed in your environment, and you must be logged in with the command line interface (CLI).
You need access to catalog.redhat.com.
Note: For managing bare metal clusters, you need a supported OpenShift Container Platform version.
- Your Red Hat OpenShift Container Platform permissions must allow you to create a namespace.
- You must have a workstation with Internet connection to download the dependencies for the operator.
1.5.2.2. Confirm your OpenShift Container Platform installation
- You must have a supported OpenShift Container Platform version, including the registry and storage services, installed and working in your cluster. For information about OpenShift Container Platform, see OpenShift Container Platform documentation.
When and if you are connected, accessing the OpenShift Container Platform web console with the following command to verify:
oc -n openshift-console get route console
See the following example output:
console console-openshift-console.apps.new-name.purple-name.com console https reencrypt/Redirect None
The console URL in this example is:
https:// console-openshift-console.apps.new-coral.purple-chesterfield.com
. Open the URL in your browser and check the result.If the console URL displays
console-openshift-console.router.default.svc.cluster.local
, set the value foropenshift_master_default_subdomain
when you install OpenShift Container Platform.
1.5.2.3. Installing in a disconnected environment
Important: You need to download the required images to a mirroring registry to install the operators in a disconnected environment. Without the download, you might receive ImagePullBackOff
errors during your deployment.
Follow these steps to install the multicluster engine operator in a disconnected environment:
Create a mirror registry. If you do not already have a mirror registry, create one by completing the procedure in the Disconnected installation mirroring topic of the Red Hat OpenShift Container Platform documentation.
If you already have a mirror registry, you can configure and use your existing one.
Note: For bare metal only, you need to provide the certificate information for the disconnected registry in your
install-config.yaml
file. To access the image in a protected disconnected registry, you must provide the certificate information so the multicluster engine operator can access the registry.- Copy the certificate information from the registry.
-
Open the
install-config.yaml
file in an editor. -
Find the entry for
additionalTrustBundle: |
. Add the certificate information after the
additionalTrustBundle
line. The resulting content should look similar to the following example:additionalTrustBundle: | -----BEGIN CERTIFICATE----- certificate_content -----END CERTIFICATE----- sshKey: >-
Important: Additional mirrors for disconnected image registries are needed if the following Governance policies are required:
-
Container Security Operator policy: Locate the images in the
registry.redhat.io/quay
source. -
Compliance Operator policy: Locate the images in the
registry.redhat.io/compliance
source. Gatekeeper Operator policy: Locate the images in the
registry.redhat.io/gatekeeper
source.See the following example of mirrors lists for all three operators:
- mirrors: - <your_registry>/rhacm2 source: registry.redhat.io/rhacm2 - mirrors: - <your_registry>/quay source: registry.redhat.io/quay - mirrors: - <your_registry>/compliance source: registry.redhat.io/compliance
-
Container Security Operator policy: Locate the images in the
-
Save the
install-config.yaml
file. Create a YAML file that contains the
ImageContentSourcePolicy
with the namemce-policy.yaml
. Note: If you modify this on a running cluster, it causes a rolling restart of all nodes.apiVersion: operator.openshift.io/v1alpha1 kind: ImageContentSourcePolicy metadata: name: mce-repo spec: repositoryDigestMirrors: - mirrors: - mirror.registry.com:5000/multicluster-engine source: registry.redhat.io/multicluster-engine
Apply the ImageContentSourcePolicy file by entering the following command:
oc apply -f mce-policy.yaml
Enable the disconnected Operator Lifecycle Manager Red Hat Operators and Community Operators.
the multicluster engine operator is included in the Operator Lifecycle Manager Red Hat Operator catalog.
- Configure the disconnected Operator Lifecycle Manager for the Red Hat Operator catalog. Follow the steps in the Using Operator Lifecycle Manager on restricted networks topic of theRed Hat OpenShift Container Platform documentation.
- Continue to install the multicluster engine operator for Kubernetes from the Operator Lifecycle Manager catalog.
See Installing while connected online for the required steps.
1.5.3. Advanced configuration
The multicluster engine operator is installed using an operator that deploys all of the required components. The multicluster engine operator can be further configured during or after installation. Learn more about the advanced configuration options.
1.5.3.1. Deployed components
Add one or more of the following attributes to the MultiClusterEngine
custom resource:
Name | Description | Enabled |
assisted-service | Installs OpenShift Container Platform with minimal infrastructure prerequisites and comprehensive pre-flight validations | True |
cluster-lifecycle | Provides cluster management capabilities for OpenShift Container Platform and Kubernetes hub clusters | True |
cluster-manager | Manages various cluster-related operations within the cluster environment | True |
cluster-proxy-addon |
Automates the installation of | True |
console-mce | Enables the multicluster engine operator console plug-in | True |
discovery | Discovers and identifies new clusters within the OpenShift Cluster Manager | True |
hive | Provisions and performs initial configuration of OpenShift Container Platform clusters | True |
hypershift | Hosts OpenShift Container Platform control planes at scale with cost and time efficiency, and cross-cloud portability | True |
hypershift-local-hosting | Enables local hosting capabilities for within the local cluster environment | True |
local-cluster | Enables the import and self-management of the local hub cluster where the multicluster engine operator is deployed | True |
managedserviceacccount | Syncronizes service accounts to managed clusters and collects tokens as secret resources back to the hub cluster | False |
server-foundation | Provides foundational services for server-side operations within the multicluster environment | True |
When you install multicluster engine operator on to the cluster, not all of the listed components are enabled by default.
You can further configure multicluster engine operator during or after installation by adding one or more attributes to the MultiClusterEngine
custom resource. Continue reading for information about the attributes that you can add.
1.5.3.2. Console and component configuration
The following example displays the spec.overrides
default template that you can use to enable or disable the component:
apiVersion: operator.open-cluster-management.io/v1
kind: MultiClusterEngine
metadata:
name: multiclusterengine
spec:
overrides:
components:
- name: <name> 1
enabled: true
-
Replace
name
with the name of the component.
Alternatively, you can run the following command. Replace namespace
with the name of your project and name
with the name of the component:
oc patch MultiClusterEngine <multiclusterengine-name> --type=json -p='[{"op": "add", "path": "/spec/overrides/components/-","value":{"name":"<name>","enabled":true}}]'
1.5.3.3. Local-cluster enablement
By default, the cluster that is running multicluster engine operator manages itself. To install multicluster engine operator without the cluster managing itself, specify the following values in the spec.overrides.components
settings in the MultiClusterEngine
section:
apiVersion: multicluster.openshift.io/v1 kind: MultiClusterEngine metadata: name: multiclusterengine spec: overrides: components: - name: local-cluster enabled: false
-
The
name
value identifies the hub cluster as alocal-cluster
. -
The
enabled
setting specifies whether the feature is enabled or disabled. When the value istrue
, the hub cluster manages itself. When the value isfalse
, the hub cluster does not manage itself.
A hub cluster that is managed by itself is designated as the local-cluster
in the list of clusters.
1.5.3.4. Custom image pull secret
If you plan to import Kubernetes clusters that were not created by OpenShift Container Platform or the multicluster engine operator, generate a secret that contains your OpenShift Container Platform pull secret information to access the entitled content from the distribution registry.
The secret requirements for OpenShift Container Platform clusters are automatically resolved by OpenShift Container Platform and multicluster engine for Kubernetes operator, so you do not have to create the secret if you are not importing other types of Kubernetes clusters to be managed.
Important: These secrets are namespace-specific, so make sure that you are in the namespace that you use for your engine.
- Download your OpenShift Container Platform pull secret file from cloud.redhat.com/openshift/install/pull-secret by selecting Download pull secret. Your OpenShift Container Platform pull secret is associated with your Red Hat Customer Portal ID, and is the same across all Kubernetes providers.
Run the following command to create your secret:
oc create secret generic <secret> -n <namespace> --from-file=.dockerconfigjson=<path-to-pull-secret> --type=kubernetes.io/dockerconfigjson
-
Replace
secret
with the name of the secret that you want to create. -
Replace
namespace
with your project namespace, as the secrets are namespace-specific. -
Replace
path-to-pull-secret
with the path to your OpenShift Container Platform pull secret that you downloaded.
-
Replace
The following example displays the spec.imagePullSecret
template to use if you want to use a custom pull secret. Replace secret
with the name of your pull secret:
apiVersion: multicluster.openshift.io/v1 kind: MultiClusterEngine metadata: name: multiclusterengine spec: imagePullSecret: <secret>
1.5.3.5. Target namespace
The operands can be installed in a designated namespace by specifying a location in the MultiClusterEngine
custom resource. This namespace is created upon application of the MultiClusterEngine
custom resource.
Important: If no target namespace is specified, the operator will install to the multicluster-engine
namespace and will set it in the MultiClusterEngine
custom resource specification.
The following example displays the spec.targetNamespace
template that you can use to specify a target namespace. Replace target
with the name of your destination namespace. Note: The target
namespace cannot be the default
namespace:
apiVersion: multicluster.openshift.io/v1 kind: MultiClusterEngine metadata: name: multiclusterengine spec: targetNamespace: <target>
1.5.3.6. availabilityConfig
The hub cluster has two availabilities: High
and Basic
. By default, the hub cluster has an availability of High
, which gives hub cluster components a replicaCount
of 2
. This provides better support in cases of failover but consumes more resources than the Basic
availability, which gives components a replicaCount
of 1
.
Important: Set spec.availabilityConfig
to Basic
if you are using multicluster engine operator on a single-node OpenShift cluster.
The following examples shows the spec.availabilityConfig
template with Basic
availability:
apiVersion: multicluster.openshift.io/v1 kind: MultiClusterEngine metadata: name: multiclusterengine spec: availabilityConfig: "Basic"
1.5.3.7. nodeSelector
You can define a set of node selectors in the MultiClusterEngine
to install to specific nodes on your cluster. The following example shows spec.nodeSelector
to assign pods to nodes with the label node-role.kubernetes.io/infra
:
spec: nodeSelector: node-role.kubernetes.io/infra: ""
To define a set of node selectors for the Red Hat Advanced Cluster Management for Kubernetes hub cluster, see nodeSelector in the Red Hat Advanced Cluster Management documentation.
1.5.3.8. tolerations
You can define a list of tolerations to allow the MultiClusterEngine
to tolerate specific taints defined on the cluster. The following example shows a spec.tolerations
that matches a node-role.kubernetes.io/infra
taint:
spec: tolerations: - key: node-role.kubernetes.io/infra effect: NoSchedule operator: Exists
The previous infra-node toleration is set on pods by default without specifying any tolerations in the configuration. Customizing tolerations in the configuration will replace this default behavior.
To define a list of tolerations for the Red Hat Advanced Cluster Management for Kubernetes hub cluster,, see tolerations in the Red Hat Advanced Cluster Management documentation.
1.5.3.9. ManagedServiceAccount add-on
The ManagedServiceAccount
add-on allows you to create or delete a service account on a managed cluster. To install with this add-on enabled, include the following in the MultiClusterEngine
specification in spec.overrides
:
apiVersion: multicluster.openshift.io/v1 kind: MultiClusterEngine metadata: name: multiclusterengine spec: overrides: components: - name: managedserviceaccount enabled: true
The ManagedServiceAccount
add-on can be enabled after creating MultiClusterEngine
by editing the resource on the command line and setting the managedserviceaccount
component to enabled: true
. Alternatively, you can run the following command and replace <multiclusterengine-name> with the name of your MultiClusterEngine
resource.
oc patch MultiClusterEngine <multiclusterengine-name> --type=json -p='[{"op": "add", "path": "/spec/overrides/components/-","value":{"name":"managedserviceaccount","enabled":true}}]'
1.5.4. Uninstalling
When you uninstall multicluster engine for Kubernetes operator, you see two different levels of the process: A custom resource removal and a complete operator uninstall. It might take up to five minutes to complete the uninstall process.
-
The custom resource removal is the most basic type of uninstall that removes the custom resource of the
MultiClusterEngine
instance but leaves other required operator resources. This level of uninstall is helpful if you plan to reinstall using the same settings and components. - The second level is a more complete uninstall that removes most operator components, excluding components such as custom resource definitions. When you continue with this step, it removes all of the components and subscriptions that were not removed with the custom resource removal. After this uninstall, you must reinstall the operator before reinstalling the custom resource.
1.5.4.1. Prerequisite: Detach enabled services
Before you uninstall the multicluster engine for Kubernetes operator, you must detach all of the clusters that are managed by that engine. To avoid errors, detach all clusters that are still managed by the engine, then try to uninstall again.
If you have managed clusters attached, you might see the following message.
Cannot delete MultiClusterEngine resource because ManagedCluster resource(s) exist
For more information about detaching clusters, see the Removing a cluster from management section by selecting the information for your provider in Creating clusters.
1.5.4.2. Removing resources by using commands
-
If you have not already. ensure that your OpenShift Container Platform CLI is configured to run
oc
commands. See Getting started with the OpenShift CLI in the OpenShift Container Platform documentation for more information about how to configure theoc
commands. Change to your project namespace by entering the following command. Replace namespace with the name of your project namespace:
oc project <namespace>
Enter the following command to remove the
MultiClusterEngine
custom resource:oc delete multiclusterengine --all
You can view the progress by entering the following command:
oc get multiclusterengine -o yaml
-
Enter the following commands to delete the multicluster-engine
ClusterServiceVersion
in the namespace it is installed in:
❯ oc get csv NAME DISPLAY VERSION REPLACES PHASE multicluster-engine.v2.0.0 multicluster engine for Kubernetes 2.0.0 Succeeded ❯ oc delete clusterserviceversion multicluster-engine.v2.0.0 ❯ oc delete sub multicluster-engine
The CSV version shown here may be different.
1.5.4.3. Deleting the components by using the console
When you use the RedHat OpenShift Container Platform console to uninstall, you remove the operator. Complete the following steps to uninstall by using the console:
- In the OpenShift Container Platform console navigation, select Operators > Installed Operators > multicluster engine for Kubernetes.
Remove the
MultiClusterEngine
custom resource.- Select the tab for Multiclusterengine.
- Select the Options menu for the MultiClusterEngine custom resource.
- Select Delete MultiClusterEngine.
Run the clean-up script according to the procedure in the following section.
Tip: If you plan to reinstall the same multicluster engine for Kubernetes operator version, you can skip the rest of the steps in this procedure and reinstall the custom resource.
- Navigate to Installed Operators.
- Remove the _ multicluster engine for Kubernetes_ operator by selecting the Options menu and selecting Uninstall operator.
1.5.4.4. Troubleshooting Uninstall
If the multicluster engine custom resource is not being removed, remove any potential remaining artifacts by running the clean-up script.
Copy the following script into a file:
#!/bin/bash oc delete apiservice v1.admission.cluster.open-cluster-management.io v1.admission.work.open-cluster-management.io oc delete validatingwebhookconfiguration multiclusterengines.multicluster.openshift.io oc delete mce --all
See Disconnected installation mirroring for more information.
1.6. Managing credentials
A credential is required to create and manage a Red Hat OpenShift Container Platform cluster on a cloud service provider with multicluster engine operator. The credential stores the access information for a cloud provider. Each provider account requires its own credential, as does each domain on a single provider.
You can create and manage your cluster credentials. Credentials are stored as Kubernetes secrets. Secrets are copied to the namespace of a managed cluster so that the controllers for the managed cluster can access the secrets. When a credential is updated, the copies of the secret are automatically updated in the managed cluster namespaces.
Note: Changes to the pull secret, SSH keys, or base domain of the cloud provider credentials are not reflected for existing managed clusters, as they have already been provisioned using the original credentials.
Required access: Edit
- Creating a credential for Amazon Web Services
- Creating a credential for Microsoft Azure
- Creating a credential for Google Cloud Platform
- Creating a credential for VMware vSphere
- Creating a credential for Red Hat OpenStack Platform
- Creating a credential for Red Hat OpenShift Cluster Manager
- Creating a credential for Ansible Automation Platform
- Creating a credential for an on-premises environment
1.6.1. Creating a credential for Amazon Web Services
You need a credential to use multicluster engine operator console to deploy and manage an Red Hat OpenShift Container Platform cluster on Amazon Web Services (AWS).
Required access: Edit
Note: This procedure must be done before you can create a cluster with multicluster engine operator.
1.6.1.1. Prerequisites
You must have the following prerequisites before creating a credential:
- A deployed multicluster engine operator hub cluster
- Internet access for your multicluster engine operator hub cluster so it can create the Kubernetes cluster on Amazon Web Services (AWS)
- AWS login credentials, which include access key ID and secret access key. See Understanding and getting your security credentials.
- Account permissions that allow installing clusters on AWS. See Configuring an AWS account for instructions on how to configure an AWS account.
1.6.1.2. Managing a credential by using the console
To create a credential from the multicluster engine operator console, complete the steps in the console.
Start at the navigation menu. Click Credentials to choose from existing credential options. Tip: Create a namespace specifically to host your credentials, both for convenience and added security.
You can optionally add a Base DNS domain for your credential. If you add the base DNS domain to the credential, it is automatically populated in the correct field when you create a cluster with this credential. See the following steps:
- Add your AWS access key ID for your AWS account. See Log in to AWS to find your ID.
- Provide the contents for your new AWS Secret Access Key.
If you want to enable a proxy, enter the proxy information:
-
HTTP proxy URL: The URL that should be used as a proxy for
HTTP
traffic. -
HTTPS proxy URL: The secure proxy URL that should be used for
HTTPS
traffic. If no value is provided, the same value as theHTTP Proxy URL
is used for bothHTTP
andHTTPS
. -
No proxy domains: A comma-separated list of domains that should bypass the proxy. Begin a domain name with a period
.
to include all of the subdomains that are in that domain. Add an asterisk*
to bypass the proxy for all destinations. - Additional trust bundle: One or more additional CA certificates that are required for proxying HTTPS connections.
-
HTTP proxy URL: The URL that should be used as a proxy for
- Enter your Red Hat OpenShift pull secret. See Download your Red Hat OpenShift pull secret to download your pull secret.
- Add your SSH private key and SSH public key, which allows you to connect to the cluster. You can use an existing key pair, or create a new one with key generation program.
You can create a cluster that uses this credential by completing the steps in Creating a cluster on Amazon Web Services or Creating a cluster on Amazon Web Services GovCloud.
You can edit your credential in the console. If the cluster was created by using this provider connection, then the <cluster-name>-aws-creds>
secret from <cluster-namespace>
will get updated with the new credentials.
Note: Updating credentials does not work for cluster pool claimed clusters.
When you are no longer managing a cluster that is using a credential, delete the credential to protect the information in the credential. Select Actions to delete in bulk, or select the options menu beside the credential that you want to delete.
1.6.1.2.1. Creating an S3 secret
To create an Amazon Simple Storage Service (S3) secret, complete the following task from the console:
- Click Add credential > AWS > S3 Bucket. If you click For Hosted Control Plane, the name and namespace are provided.
Enter information for the following fields that are provided:
-
bucket name
: Add the name of the S3 bucket. -
aws_access_key_id
: Add your AWS access key ID for your AWS account. Log in to AWS to find your ID. -
aws_secret_access_key
: Provide the contents for your new AWS Secret Access Key. -
Region
: Enter your AWS region.
-
1.6.1.3. Creating an opaque secret by using the API
To create an opaque secret for Amazon Web Services by using the API, apply YAML content in the YAML preview window that is similar to the following example:
kind: Secret metadata: name: <managed-cluster-name>-aws-creds namespace: <managed-cluster-namespace> type: Opaque data: aws_access_key_id: $(echo -n "${AWS_KEY}" | base64 -w0) aws_secret_access_key: $(echo -n "${AWS_SECRET}" | base64 -w0)
Notes:
- Opaque secrets are not visible in the console.
- Opaque secrets are created in the managed cluster namespace you chose. Hive uses the opaque secret to provision the cluster. When provisioning the cluster by using the Red Hat Advanced Cluster Management console, the credentials you previoulsy created are copied to the managed cluster namespace as the opaque secret.
-
Add labels to your credentials to view your secret in the console. For example, the following AWS S3 Bucket
oc label secret
is appended withtype=awss3
andcredentials --from-file=….
:
oc label secret hypershift-operator-oidc-provider-s3-credentials -n local-cluster "cluster.open-cluster-management.io/type=awss3" oc label secret hypershift-operator-oidc-provider-s3-credentials -n local-cluster "cluster.open-cluster-management.io/credentials=credentials="
1.6.1.4. Additional resources
- See Understanding and getting your security credentials.
- See Configuring an AWS account.
- Log in to AWS.
- Download your Red Hat OpenShift pull secret.
- See Generating a key pair for cluster node SSH access for more information about how to generate a key.
- See Creating a cluster on Amazon Web Services.
- See Creating a cluster on Amazon Web Services GovCloud.
- Return to Creating a credential for Amazon Web Services.
1.6.2. Creating a credential for Microsoft Azure
You need a credential to use multicluster engine operator console to create and manage a Red Hat OpenShift Container Platform cluster on Microsoft Azure or on Microsoft Azure Government.
Required access: Edit
Note: This procedure is a prerequisite for creating a cluster with multicluster engine operator.
1.6.2.1. Prerequisites
You must have the following prerequisites before creating a credential:
- A deployed multicluster engine operator hub cluster.
- Internet access for your multicluster engine operator hub cluster so that it can create the Kubernetes cluster on Azure.
- Azure login credentials, which include your Base Domain Resource Group and Azure Service Principal JSON. See Microsoft Azure portal to get your login credentials.
- Account permissions that allow installing clusters on Azure. See How to configure Cloud Services and Configuring an Azure account for more information.
1.6.2.2. Managing a credential by using the console
To create a credential from the multicluster engine operator console, complete the steps in the console. Start at the navigation menu. Click Credentials to choose from existing credential options. Tip: Create a namespace specifically to host your credentials, both for convenience and added security.
- Optional: Add a Base DNS domain for your credential. If you add the base DNS domain to the credential, it is automatically populated in the correct field when you create a cluster with this credential.
-
Select whether the environment for your cluster is
AzurePublicCloud
orAzureUSGovernmentCloud
. The settings are different for the Azure Government environment, so ensure that this is set correctly. - Add your Base domain resource group name for your Azure account. This entry is the resource name that you created with your Azure account. You can find your Base Domain Resource Group Name by selecting Home > DNS Zones in the Azure interface. See Create an Azure service principal with the Azure CLI to find your base domain resource group name.
Provide the contents for your Client ID. This value is generated as the
appId
property when you create a service principal with the following command:az ad sp create-for-rbac --role Contributor --name <service_principal> --scopes <subscription_path>
Replace service_principal with the name of your service principal.
Add your Client Secret. This value is generated as the
password
property when you create a service principal with the following command:az ad sp create-for-rbac --role Contributor --name <service_principal> --scopes <subscription_path>
Replace service_principal with the name of your service principal.
Add your Subscription ID. This value is the
id
property in the output of the following command:az account show
Add your Tenant ID. This value is the
tenantId
property in the output of the following command:az account show
If you want to enable a proxy, enter the proxy information:
-
HTTP proxy URL: The URL that should be used as a proxy for
HTTP
traffic. -
HTTPS proxy URL: The secure proxy URL that should be used for
HTTPS
traffic. If no value is provided, the same value as theHTTP Proxy URL
is used for bothHTTP
andHTTPS
. -
No proxy domains: A comma-separated list of domains that should bypass the proxy. Begin a domain name with a period
.
to include all of the subdomains that are in that domain. Add an asterisk*
to bypass the proxy for all destinations. - Additional trust bundle: One or more additional CA certificates that are required for proxying HTTPS connections.
-
HTTP proxy URL: The URL that should be used as a proxy for
- Enter your Red Hat OpenShift pull secret. See Download your Red Hat OpenShift pull secret to download your pull secret.
- Add your SSH private key and SSH public key to use to connect to the cluster. You can use an existing key pair, or create a new pair using a key generation program.
You can create a cluster that uses this credential by completing the steps in Creating a cluster on Microsoft Azure.
You can edit your credential in the console.
When you are no longer managing a cluster that is using a credential, delete the credential to protect the information in the credential. Select Actions to delete in bulk, or select the options menu beside the credential that you want to delete.
1.6.2.3. Creating an opaque secret by using the API
To create an opaque secret for Microsoft Azure by using the API instead of the console, apply YAML content in the YAML preview window that is similar to the following example:
kind: Secret metadata: name: <managed-cluster-name>-azure-creds namespace: <managed-cluster-namespace> type: Opaque data: baseDomainResourceGroupName: $(echo -n "${azure_resource_group_name}" | base64 -w0) osServicePrincipal.json: $(base64 -w0 "${AZURE_CRED_JSON}")
Notes:
- Opaque secrets are not visible in the console.
- Opaque secrets are created in the managed cluster namespace you chose. Hive uses the opaque secret to provision the cluster. When provisioning the cluster by using the Red Hat Advanced Cluster Management console, the credentials you previoulsy created are copied to the managed cluster namespace as the opaque secret.
1.6.2.4. Additional resources
- See Microsoft Azure portal.
- See How to configure Cloud Services.
- See Configuring an Azure account.
- See Create an Azure service principal with the Azure CLI to find your base domain resource group name.
- Download your Red Hat OpenShift pull secret.
- See Generating a key pair for cluster node SSH access for more information about how to generate a key.
- See Creating a cluster on Microsoft Azure.
- Return to Creating a credential for Microsoft Azure.
1.6.3. Creating a credential for Google Cloud Platform
You need a credential to use multicluster engine operator console to create and manage a Red Hat OpenShift Container Platform cluster on Google Cloud Platform (GCP).
Required access: Edit
Note: This procedure is a prerequisite for creating a cluster with multicluster engine operator.
1.6.3.1. Prerequisites
You must have the following prerequisites before creating a credential:
- A deployed multicluster engine operator hub cluster
- Internet access for your multicluster engine operator hub cluster so it can create the Kubernetes cluster on GCP
- GCP login credentials, which include user Google Cloud Platform Project ID and Google Cloud Platform service account JSON key. See Creating and managing projects.
- Account permissions that allow installing clusters on GCP. See Configuring a GCP project for instructions on how to configure an account.
1.6.3.2. Managing a credential by using the console
To create a credential from the multicluster engine operator console, complete the steps in the console.
Start at the navigation menu. Click Credentials to choose from existing credential options. Tip: Create a namespace specifically to host your credentials, for both convenience and security.
You can optionally add a Base DNS domain for your credential. If you add the base DNS domain to the credential, it is automatically populated in the correct field when you create a cluster with this credential. See the following steps:
- Add your Google Cloud Platform project ID for your GCP account. See Log in to GCP to retrieve your settings.
- Add your Google Cloud Platform service account JSON key. See the Create service accounts documentation to create your service account JSON key. Follow the steps for the GCP console.
- Provide the contents for your new Google Cloud Platform service account JSON key.
If you want to enable a proxy, enter the proxy information:
-
HTTP proxy URL: The URL that should be used as a proxy for
HTTP
traffic. -
HTTPS proxy URL: The secure proxy URL that should be used for
HTTPS
traffic. If no value is provided, the same value as theHTTP Proxy URL
is used for bothHTTP
andHTTPS
. -
No proxy domains: A comma-separated list of domains that should bypass the proxy. Begin a domain name with a period
.
to include all of the subdomains that are in that domain. Add and asterisk*
to bypass the proxy for all destinations. - Additional trust bundle: One or more additional CA certificates that are required for proxying HTTPS connections.
-
HTTP proxy URL: The URL that should be used as a proxy for
- Enter your Red Hat OpenShift pull secret. See Download your Red Hat OpenShift pull secret to download your pull secret.
- Add your SSH private key and SSH public key so you can access the cluster. You can use an existing key pair, or create a new pair using a key generation program.
You can use this connection when you create a cluster by completing the steps in Creating a cluster on Google Cloud Platform.
You can edit your credential in the console.
When you are no longer managing a cluster that is using a credential, delete the credential to protect the information in the credential. Select Actions to delete in bulk, or select the options menu beside the credential that you want to delete.
1.6.3.3. Creating an opaque secret by using the API
To create an opaque secret for Google Cloud Platform by using the API instead of the console, apply YAML content in the YAML preview window that is similar to the following example:
kind: Secret metadata: name: <managed-cluster-name>-gcp-creds namespace: <managed-cluster-namespace> type: Opaque data: osServiceAccount.json: $(base64 -w0 "${GCP_CRED_JSON}")
Notes:
- Opaque secrets are not visible in the console.
- Opaque secrets are created in the managed cluster namespace you chose. Hive uses the opaque secret to provision the cluster. When provisioning the cluster by using the Red Hat Advanced Cluster Management console, the credentials you previoulsy created are copied to the managed cluster namespace as the opaque secret.
1.6.3.4. Additional resources
- See Creating and managing projects.
- See Configuring a GCP project.
- Log in to GCP.
- See the Create service accounts to create your service account JSON key.
- Download your Red Hat OpenShift pull secret.
- See Generating a key pair for cluster node SSH access for more information about how to generate a key.
- See Creating a cluster on Google Cloud Platform.
1.6.4. Creating a credential for VMware vSphere
You need a credential to use multicluster engine operator console to deploy and manage a Red Hat OpenShift Container Platform cluster on VMware vSphere.
Required access: Edit
1.6.4.1. Prerequisites
You must have the following prerequisites before you create a credential:
- You must create a credential for VMware vSphere before you can create a cluster with multicluster engine operator.
- A deployed hub cluster on a supported OpenShift Container Platform version.
- Internet access for your hub cluster so it can create the Kubernetes cluster on VMware vSphere.
VMware vSphere login credentials and vCenter requirements configured for OpenShift Container Platform when using installer-provisioned infrastructure. See Installing a cluster on vSphere with customizations. These credentials include the following information:
- vCenter account privileges.
- Cluster resources.
- DHCP available.
- ESXi hosts have time synchronized (for example, NTP).
1.6.4.2. Managing a credential by using the console
To create a credential from the multicluster engine operator console, complete the steps in the console.
Start at the navigation menu. Click Credentials to choose from existing credential options. Tip: Create a namespace specifically to host your credentials, both for convenience and added security.
You can optionally add a Base DNS domain for your credential. If you add the base DNS domain to the credential, it is automatically populated in the correct field when you create a cluster with this credential. See the following steps:
- Add your VMware vCenter server fully-qualified host name or IP address. The value must be defined in the vCenter server root CA certificate. If possible, use the fully-qualified host name.
- Add your VMware vCenter username.
- Add your VMware vCenter password.
Add your VMware vCenter root CA certificate.
-
You can download your certificate in the
download.zip
package with the certificate from your VMware vCenter server at:https://<vCenter_address>/certs/download.zip
. Replace vCenter_address with the address to your vCenter server. -
Unpackage the
download.zip
. Use the certificates from the
certs/<platform>
directory that have a.0
extension.Tip: You can use the
ls certs/<platform>
command to list all of the available certificates for your platform.Replace
<platform>
with the abbreviation for your platform:lin
,mac
, orwin
.For example:
certs/lin/3a343545.0
Best practice: Link together multiple certificates with a
.0
extension by running thecat certs/lin/*.0 > ca.crt
command.- Add your VMware vSphere cluster name.
- Add your VMware vSphere datacenter.
- Add your VMware vSphere default datastore.
- Add your VMware vSphere disk type.
- Add your VMware vSphere folder.
- Add your VMware vSphere resource pool.
-
You can download your certificate in the
For disconnected installations only: Complete the fields in the Configuration for disconnected installation subsection with the required information:
- Cluster OS image: This value contains the URL to the image to use for Red Hat OpenShift Container Platform cluster machines.
Image content source: This value contains the disconnected registry path. The path contains the hostname, port, and repository path to all of the installation images for disconnected installations. Example:
repository.com:5000/openshift/ocp-release
.The path creates an image content source policy mapping in the
install-config.yaml
to the Red Hat OpenShift Container Platform release images. As an example,repository.com:5000
produces thisimageContentSource
content:- mirrors: - registry.example.com:5000/ocp4 source: quay.io/openshift-release-dev/ocp-release-nightly - mirrors: - registry.example.com:5000/ocp4 source: quay.io/openshift-release-dev/ocp-release - mirrors: - registry.example.com:5000/ocp4 source: quay.io/openshift-release-dev/ocp-v4.0-art-dev
Additional trust bundle: This value provides the contents of the certificate file that is required to access the mirror registry.
Note: If you are deploying managed clusters from a hub that is in a disconnected environment, and want them to be automatically imported post install, add an Image Content Source Policy to the
install-config.yaml
file by using theYAML
editor. A sample entry is shown in the following example:- mirrors: - registry.example.com:5000/rhacm2 source: registry.redhat.io/rhacm2
If you want to enable a proxy, enter the proxy information:
-
HTTP proxy URL: The URL that should be used as a proxy for
HTTP
traffic. -
HTTPS proxy URL: The secure proxy URL that should be used for
HTTPS
traffic. If no value is provided, the same value as theHTTP Proxy URL
is used for bothHTTP
andHTTPS
. -
No proxy domains: A comma-separated list of domains that should bypass the proxy. Begin a domain name with a period
.
to include all of the subdomains that are in that domain. Add and asterisk*
to bypass the proxy for all destinations. - Additional trust bundle: One or more additional CA certificates that are required for proxying HTTPS connections.
-
HTTP proxy URL: The URL that should be used as a proxy for
- Enter your Red Hat OpenShift pull secret. See Download your Red Hat OpenShift pull secret to download your pull secret.
Add your SSH private key and SSH public key, which allows you to connect to the cluster.
You can use an existing key pair, or create a new one with key generation program.
You can create a cluster that uses this credential by completing the steps in Creating a cluster on VMware vSphere.
You can edit your credential in the console.
When you are no longer managing a cluster that is using a credential, delete the credential to protect the information in the credential. Select Actions to delete in bulk, or select the options menu beside the credential that you want to delete.
1.6.4.3. Creating an opaque secret by using the API
To create an opaque secret for VMware vSphere by using the API instead of the console, apply YAML content in the YAML preview window that is similar to the following example:
kind: Secret metadata: name: <managed-cluster-name>-vsphere-creds namespace: <managed-cluster-namespace> type: Opaque data: username: $(echo -n "${VMW_USERNAME}" | base64 -w0) password.json: $(base64 -w0 "${VMW_PASSWORD}")
Notes:
- Opaque secrets are not visible in the console.
- Opaque secrets are created in the managed cluster namespace you chose. Hive uses the opaque secret to provision the cluster. When provisioning the cluster by using the Red Hat Advanced Cluster Management console, the credentials you previoulsy created are copied to the managed cluster namespace as the opaque secret.
1.6.4.4. Additional resources
1.6.5. Creating a credential for Red Hat OpenStack
You need a credential to use multicluster engine operator console to deploy and manage a supported Red Hat OpenShift Container Platform cluster on Red Hat OpenStack Platform.
Notes: You must create a credential for Red Hat OpenStack Platform before you can create a cluster with multicluster engine operator.
1.6.5.1. Prerequisites
You must have the following prerequisites before you create a credential:
- A deployed hub cluster on a supported OpenShift Container Platform version.
- Internet access for your hub cluster so it can create the Kubernetes cluster on Red Hat OpenStack Platform.
- Red Hat OpenStack Platform login credentials and Red Hat OpenStack Platform requirements configured for OpenShift Container Platform when using installer-provisioned infrastructure. See Installing a cluster on OpenStack with customizations.
Download or create a
clouds.yaml
file for accessing the CloudStack API. Within theclouds.yaml
file:- Determine the cloud auth section name to use.
- Add a line for the password, immediately following the username line.
1.6.5.2. Managing a credential by using the console
To create a credential from the multicluster engine operator console, complete the steps in the console.
Start at the navigation menu. Click Credentials to choose from existing credential options. To enhance security and convenience, you can create a namespace specifically to host your credentials.
- Optional: You can add a Base DNS domain for your credential. If you add the base DNS domain, it is automatically populated in the correct field when you create a cluster with this credential.
-
Add your Red Hat OpenStack Platform
clouds.yaml
file contents. The contents of theclouds.yaml
file, including the password, provide the required information for connecting to the Red Hat OpenStack Platform server. The file contents must include the password, which you add to a new line immediately after theusername
. -
Add your Red Hat OpenStack Platform cloud name. This entry is the name specified in the cloud section of the
clouds.yaml
to use for establishing communication to the Red Hat OpenStack Platform server. -
Optional: For configurations that use an internal certificate authority, enter your certificate in the Internal CA certificate field to automatically update your
clouds.yaml
with the certificate information. For disconnected installations only: Complete the fields in the Configuration for disconnected installation subsection with the required information:
- Cluster OS image: This value contains the URL to the image to use for Red Hat OpenShift Container Platform cluster machines.
Image content sources: This value contains the disconnected registry path. The path contains the hostname, port, and repository path to all of the installation images for disconnected installations. Example:
repository.com:5000/openshift/ocp-release
.The path creates an image content source policy mapping in the
install-config.yaml
to the Red Hat OpenShift Container Platform release images. As an example,repository.com:5000
produces thisimageContentSource
content:- mirrors: - registry.example.com:5000/ocp4 source: quay.io/openshift-release-dev/ocp-release-nightly - mirrors: - registry.example.com:5000/ocp4 source: quay.io/openshift-release-dev/ocp-release - mirrors: - registry.example.com:5000/ocp4 source: quay.io/openshift-release-dev/ocp-v4.0-art-dev
Additional trust bundle: This value provides the contents of the certificate file that is required to access the mirror registry.
Note: If you are deploying managed clusters from a hub that is in a disconnected environment, and want them to be automatically imported post install, add an Image Content Source Policy to the
install-config.yaml
file by using theYAML
editor. A sample entry is shown in the following example:- mirrors: - registry.example.com:5000/rhacm2 source: registry.redhat.io/rhacm2
If you want to enable a proxy, enter the proxy information:
-
HTTP proxy URL: The URL that should be used as a proxy for
HTTP
traffic. -
HTTPS proxy URL: The secure proxy URL that should be used for
HTTPS
traffic. If no value is provided, the same value as theHTTP Proxy URL
is used for bothHTTP
andHTTPS
. -
No proxy domains: A comma-separated list of domains that should bypass the proxy. Begin a domain name with a period
.
to include all of the subdomains that are in that domain. Add an asterisk*
to bypass the proxy for all destinations. - Additional trust bundle: One or more additional CA certificates that are required for proxying HTTPS connections.
-
HTTP proxy URL: The URL that should be used as a proxy for
- Enter your Red Hat OpenShift pull secret. See Download your Red Hat OpenShift pull secret to download your pull secret.
- Add your SSH Private Key and SSH Public Key, which allows you to connect to the cluster. You can use an existing key pair, or create a new one with key generation program.
- Click Create.
- Review the new credential information, then click Add. When you add the credential, it is added to the list of credentials.
You can create a cluster that uses this credential by completing the steps in Creating a cluster on Red Hat OpenStack Platform.
You can edit your credential in the console.
When you are no longer managing a cluster that is using a credential, delete the credential to protect the information in the credential. Select Actions to delete in bulk, or select the options menu beside the credential that you want to delete.
1.6.5.3. Creating an opaque secret by using the API
To create an opaque secret for Red Hat OpenStack Platform by using the API instead of the console, apply YAML content in the YAML preview window that is similar to the following example:
kind: Secret metadata: name: <managed-cluster-name>-osp-creds namespace: <managed-cluster-namespace> type: Opaque data: clouds.yaml: $(base64 -w0 "${OSP_CRED_YAML}") cloud: $(echo -n "openstack" | base64 -w0)
Notes:
- Opaque secrets are not visible in the console.
- Opaque secrets are created in the managed cluster namespace you chose. Hive uses the opaque secret to provision the cluster. When provisioning the cluster by using the Red Hat Advanced Cluster Management console, the credentials you previoulsy created are copied to the managed cluster namespace as the opaque secret.
1.6.5.4. Additional resources
1.6.6. Creating a credential for Red Hat OpenShift Cluster Manager
Add an OpenShift Cluster Manager credential so that you can discover clusters.
Required access: Administrator
1.6.6.1. Prerequisite
You need an API token for the OpenShift Cluster Manager account, or you can use a separate Service Account.
- To obtain an API token, see Downloading the OpenShift Cluster Manager API token.
- To use a Service Account, you must obtain the client ID and client secret when you are creating the Service Account. Enter the credentials to create the OpenShift Cluster Manager credential on your multicluster engine for Kubernetes operator. See Creating and managing a service account.
1.6.6.2. Adding a credential by using the console
You need to add your credential to discover clusters. To create a credential from the multicluster engine operator console, complete the steps in the console:
- Log in to your cluster.
- Click Credentials > Credential type to choose from existing credential options.
- Create a namespace specifically to host your credentials, both for convenience and added security.
- Click Add credential.
- Select the Red Hat OpenShift Cluster Manager option.
- Select one of the authentication methods.
Notes:
- When you are no longer managing a cluster that is using a credential, delete the credential to protect the information in the credential.
- If your credential is removed, or your OpenShift Cluster Manager API token expires or is revoked, then the associated discovered clusters are removed.
1.6.7. Creating a credential for Ansible Automation Platform
You need a credential to use multicluster engine operator console to deploy and manage an Red Hat OpenShift Container Platform cluster that is using Red Hat Ansible Automation Platform.
Required access: Edit
Note: This procedure must be done before you can create an Automation template to enable automation on a cluster.
1.6.7.1. Prerequisites
You must have the following prerequisites before creating a credential:
- A deployed multicluster engine operator hub cluster
- Internet access for your multicluster engine operator hub cluster
- Ansible login credentials, which includes Ansible Automation Platform hostname and OAuth token; see Credentials for Ansible Automation Platform.
- Account permissions that allow you to install hub clusters and work with Ansible. Learn more about Ansible users.
1.6.7.2. Managing a credential by using the console
To create a credential from the multicluster engine operator console, complete the steps in the console.
Start at the navigation menu. Click Credentials to choose from existing credential options. Tip: Create a namespace specifically to host your credentials, both for convenience and added security.
The Ansible Token and host URL that you provide when you create your Ansible credential are automatically updated for the automations that use that credential when you edit the credential. The updates are copied to any automations that use that Ansible credential, including those related to cluster lifecycle, governance, and application management automations. This ensures that the automations continue to run after the credential is updated.
You can edit your credential in the console. Ansible credentials are automatically updated in your automation that use that credential when you update them in the credential.
You can create an Ansible Job that uses this credential by completing the steps in Configuring Ansible Automation Platform tasks to run on managed clusters.
When you are no longer managing a cluster that is using a credential, delete the credential to protect the information in the credential. Select Actions to delete in bulk, or select the options menu beside the credential that you want to delete.
1.6.8. Creating a credential for an on-premises environment
You need a credential to use the console to deploy and manage a Red Hat OpenShift Container Platform cluster in an on-premises environment. The credential specifies the connections that are used for the cluster.
Required access: Edit
1.6.8.1. Prerequisites
You need the following prerequisites before creating a credential:
- A hub cluster that is deployed.
- Internet access for your hub cluster so it can create the Kubernetes cluster on your infrastructure environment.
- For a disconnected environment, you must have a configured mirror registry where you can copy the release images for your cluster creation. See Disconnected installation mirroring in the OpenShift Container Platform documentation for more information.
- Account permissions that support installing clusters on the on-premises environment.
1.6.8.2. Managing a credential by using the console
To create a credential from the console, complete the steps in the console.
Start at the navigation menu. Click Credentials to choose from existing credential options. Tip: Create a namespace specifically to host your credentials, both for convenience and added security.
- Select Host inventory for your credential type.
- You can optionally add a Base DNS domain for your credential. If you add the base DNS domain to the credential, it is automatically populated in the correct field when you create a cluster with this credential. If you do not add the DNS domain, you can add it when you create your cluster.
- Enter your Red Hat OpenShift pull secret. This pull secret is automatically entered when you create a cluster and specify this credential. You can download your pull secret from Pull secret. See Using image pull secrets for more information about pull secrets.
-
Enter your
SSH public key
. ThisSSH public key
is also automatically entered when you create a cluster and specify this credential. - Select Add to create your credential.
You can create a cluster that uses this credential by completing the steps in Creating a cluster in an on-premises environment.
When you are no longer managing a cluster that is using a credential, delete the credential to protect the information in the credential. Select Actions to delete in bulk, or select the options menu beside the credential that you want to delete.
1.7. Cluster lifecycle introduction
The multicluster engine operator is the cluster lifecycle operator that provides cluster management capabilities for OpenShift Container Platform and Red Hat Advanced Cluster Management hub clusters. The multicluster engine operator is a software operator that enhances cluster fleet management and supports OpenShift Container Platform cluster lifecycle management across clouds and data centers. You can use multicluster engine operator with or without Red Hat Advanced Cluster Management. Red Hat Advanced Cluster Management also installs multicluster engine operator automatically and offers further multicluster capabilities.
See the following documentation:
- Cluster lifecycle architecture
- Managing credentials overview
- Release images
- Creating clusters
- Cluster import
- Accessing your cluster
- Scaling managed clusters
- Hibernating a created cluster
- Upgrading your cluster
- Enabling cluster proxy add-ons
- Configuring Ansible Automation Platform tasks to run on managed clusters
- ClusterClaims
- ManagedClusterSets
- Placement
- Managing cluster pools (Technology Preview)
- Enabling ManagedServiceAccount
- Cluster lifecycle advanced configuration
- Removing a cluster from management
1.7.1. Cluster lifecycle architecture
Cluster lifecycle requires two types of clusters: hub clusters and managed clusters.
The hub cluster is the OpenShift Container Platform (or Red Hat Advanced Cluster Management) main cluster with the multicluster engine operator automatically installed. You can create, manage, and monitor other Kubernetes clusters with the hub cluster. You can create clusters by using the hub cluster, while you can also import existing clusters to be managed by the hub cluster.
When you create a managed cluster, the cluster is created using the Red Hat OpenShift Container Platform cluster installer with the Hive resource. You can find more information about the process of installing clusters with the OpenShift Container Platform installer by reading Installing and configuring OpenShift Container Platform clusters in the OpenShift Container Platform documentation.
The following diagram shows the components that are installed with the multicluster engine for Kubernetes operator for cluster management:
The components of the cluster lifecycle management architecture include the following items:
1.7.1.1. Hub cluster
- The managed cluster import controller deploys the klusterlet operator to the managed clusters.
- The Hive controller provisions the clusters that you create by using the multicluster engine for Kubernetes operator. The Hive Controller also destroys managed clusters that were created by the multicluster engine for Kubernetes operator.
- The cluster curator controller creates the Ansible jobs as the pre-hook or post-hook to configure the cluster infrastructure environment when creating or upgrading managed clusters.
- When a managed cluster add-on is enabled on the hub cluster, its add-on hub controller is deployed on the hub cluster. The add-on hub controller deploys the add-on agent to the managed clusters.
1.7.1.2. Managed cluster
- The klusterlet operator deploys the registration and work controllers on the managed cluster.
The Registration Agent registers the managed cluster and the managed cluster add-ons with the hub cluster. The Registration Agent also maintains the status of the managed cluster and the managed cluster add-ons. The following permissions are automatically created within the Clusterrole to allow the managed cluster to access the hub cluster:
- Allows the agent to get or update its owned cluster that the hub cluster manages
- Allows the agent to update the status of its owned cluster that the hub cluster manages
- Allows the agent to rotate its certificate
-
Allows the agent to
get
orupdate
thecoordination.k8s.io
lease -
Allows the agent to
get
its managed cluster add-ons - Allows the agent to update the status of its managed cluster add-ons
- The work agent applies the Add-on Agent to the managed cluster. The permission to allow the managed cluster to access the hub cluster is automatically created within the Clusterrole and allows the agent to send events to the hub cluster.
To continue adding and managing clusters, see the Cluster lifecycle introduction.
1.7.2. Release images
When you build your cluster, use the version of Red Hat OpenShift Container Platform that the release image specifies. By default, OpenShift Container Platform uses the clusterImageSets
resources to get the list of supported release images.
Continue reading to learn more about release images:
1.7.2.1. Specifying release images
When you create a cluster on a provider by using multicluster engine for Kubernetes operator, specify a release image to use for your new cluster. To specify a release image, see the following topics:
1.7.2.1.1. Locating ClusterImageSets
The YAML files referencing the release images are maintained in the acm-hive-openshift-releases GitHub repository. The files are used to create the list of the available release images in the console. This includes the latest fast channel images from OpenShift Container Platform.
The console only displays the latest release images for the three latest versions of OpenShift Container Platform. For example, you might see the following release image displayed in the console options:
quay.io/openshift-release-dev/ocp-release:4.15.1-x86_64
The console displays the latest versions to help you create a cluster with the latest release images. If you need to create a cluster that is a specific version, older release image versions are also available.
Note: You can only select images with the visible: 'true'
label when creating clusters in the console. An example of this label in a ClusterImageSet
resource is provided in the following content. Replace 4.x.1
with the current version of the product:
apiVersion: hive.openshift.io/v1 kind: ClusterImageSet metadata: labels: channel: fast visible: 'true' name: img4.x.1-x86-64-appsub spec: releaseImage: quay.io/openshift-release-dev/ocp-release:4.x.1-x86_64
Additional release images are stored, but are not visible in the console. To view all of the available release images, run the following command:
oc get clusterimageset
The repository has the clusterImageSets
directory, which is the directory that you use when working with the release images. The clusterImageSets
directory has the following directories:
- Fast: Contains files that reference the latest versions of the release images for each supported OpenShift Container Platform version. The release images in this folder are tested, verified, and supported.
Releases: Contains files that reference all of the release images for each OpenShift Container Platform version (stable, fast, and candidate channels)
Note: These releases have not all been tested and determined to be stable.
Stable: Contains files that reference the latest two stable versions of the release images for each supported OpenShift Container Platform version..
Note: By default, the current list of release images updates one time every hour. After upgrading the product, it might take up to one hour for the list to reflect the recommended release image versions for the new version of the product.
1.7.2.1.2. Configuring ClusterImageSets
You can configure your ClusterImageSets
with the following options:
Option 1: To create a cluster in the console, specify the image reference for the specific
ClusterImageSet
that you want to us. Each new entry you specify persists and is available for all future cluster provisions See the following example entry:quay.io/openshift-release-dev/ocp-release:4.6.8-x86_64
-
Option 2: Manually create and apply a
ClusterImageSets
YAML file from theacm-hive-openshift-releases
GitHub repository. -
Option 3: To enable automatic updates of
ClusterImageSets
from a forked GitHub repository, follow theREADME.md
in the cluster-image-set-controller GitHub repository.
1.7.2.1.3. Creating a release image to deploy a cluster on a different architecture
You can create a cluster on an architecture that is different from the architecture of the hub cluster by manually creating a release image that has the files for both architectures.
For example, you might need to create an x86_64
cluster from a hub cluster that is running on the ppc64le
, aarch64
, or s390x
architecture. If you create the release image with both sets of files, the cluster creation succeeds because the new release image enables the OpenShift Container Platform release registry to provide a multi-architecture image manifest.
OpenShift Container Platform supports multiple architectures by default. You can use the following clusterImageSet
to provision a cluster. Replace 4.x.0
with the current supported version:
apiVersion: hive.openshift.io/v1 kind: ClusterImageSet metadata: labels: channel: fast visible: 'true' name: img4.x.0-multi-appsub spec: releaseImage: quay.io/openshift-release-dev/ocp-release:4.x.0-multi
To create the release image for OpenShift Container Platform images that do not support multiple architectures, complete steps similar to the following example for your architecture type:
From the OpenShift Container Platform release registry, create a manifest list that includes
x86_64
,s390x
,aarch64
, andppc64le
release images.Pull the manifest lists for both architectures in your environment from the Quay repository by running the following example commands. Replace
4.x.1
with the current version of the product:podman pull quay.io/openshift-release-dev/ocp-release:4.x.1-x86_64 podman pull quay.io/openshift-release-dev/ocp-release:4.x.1-ppc64le podman pull quay.io/openshift-release-dev/ocp-release:4.x.1-s390x podman pull quay.io/openshift-release-dev/ocp-release:4.x.1-aarch64
Log in to your private repository where you maintain your images by running the following command. Replace
<private-repo>
with the path to your repository:podman login <private-repo>
Add the release image manifest to your private repository by running the following commands that apply to your environment. Replace
4.x.1
with the current version of the product. Replace<private-repo>
with the path to your repository:podman push quay.io/openshift-release-dev/ocp-release:4.x.1-x86_64 <private-repo>/ocp-release:4.x.1-x86_64 podman push quay.io/openshift-release-dev/ocp-release:4.x.1-ppc64le <private-repo>/ocp-release:4.x.1-ppc64le podman push quay.io/openshift-release-dev/ocp-release:4.x.1-s390x <private-repo>/ocp-release:4.x.1-s390x podman push quay.io/openshift-release-dev/ocp-release:4.x.1-aarch64 <private-repo>/ocp-release:4.x.1-aarch64
Create a manifest for the new information by running the following command:
podman manifest create mymanifest
Add references to both release images to the manifest list by running the following commands. Replace
4.x.1
with the current version of the product. Replace<private-repo>
with the path to your repository:podman manifest add mymanifest <private-repo>/ocp-release:4.x.1-x86_64 podman manifest add mymanifest <private-repo>/ocp-release:4.x.1-ppc64le podman manifest add mymanifest <private-repo>/ocp-release:4.x.1-s390x podman manifest add mymanifest <private-repo>/ocp-release:4.x.1-aarch64
Merge the list in your manifest list with the existing manifest by running the following command. Replace
<private-repo>
with the path to your repository. Replace4.x.1
with the current version:podman manifest push mymanifest docker://<private-repo>/ocp-release:4.x.1
On the hub cluster, create a release image that references the manifest in your repository.
Create a YAML file that contains information that is similar to the following example. Replace
<private-repo>
with the path to your repository. Replace4.x.1
with the current version:apiVersion: hive.openshift.io/v1 kind: ClusterImageSet metadata: labels: channel: fast visible: "true" name: img4.x.1-appsub spec: releaseImage: <private-repo>/ocp-release:4.x.1
Run the following command on your hub cluster to apply the changes. Replace
<file-name>
with the name of the YAML file that you created in the previous step:oc apply -f <file-name>.yaml
- Select the new release image when you create your OpenShift Container Platform cluster.
- If you deploy the managed cluster by using the Red Hat Advanced Cluster Management console, specify the architecture for the managed cluster in the Architecture field during the cluster creation process.
The creation process uses the merged release images to create the cluster.
1.7.2.1.4. Additional resources
- See the acm-hive-openshift-releases GitHub repository for the YAML files that reference the release images.
-
See the cluster-image-set-controller GitHub repository to learn how to enable enable automatic updates of
ClusterImageSets
resources from a forked GitHub repository.
1.7.2.2. Maintaining a custom list of release images when connected
You might want to use the same release image for all of your clusters. To simplify, you can create your own custom list of release images that are available when creating a cluster. Complete the following steps to manage your available release images:
- Fork the acm-hive-openshift-releases GitHub.
-
Add the YAML files for the images that you want available when you create a cluster. Add the images to the
./clusterImageSets/stable/
or./clusterImageSets/fast/
directory by using the Git console or the terminal. -
Create a
ConfigMap
in themulticluster-engine
namespace namedcluster-image-set-git-repo
. See the following example, but replace2.x
with 2.7:
apiVersion: v1 kind: ConfigMap metadata: name: cluster-image-set-git-repo namespace: multicluster-engine data: gitRepoUrl: <forked acm-hive-openshift-releases repository URL> gitRepoBranch: backplane-<2.x> gitRepoPath: clusterImageSets channel: <fast or stable>
You can retrieve the available YAML files from the main repository by merging changes in to your forked repository with the following procedure:
- Commit and merge your changes to your forked repository.
-
To synchronize your list of fast release images after you clone the
acm-hive-openshift-releases
repository, update the value of channel field in thecluster-image-set-git-repo
ConfigMap
tofast
. -
To synchronize and display the stable release images, update the value of channel field in the
cluster-image-set-git-repo
ConfigMap
tostable
.
After updating the ConfigMap
, the list of available stable release images updates with the currently available images in about one minute.
You can use the following commands to list what is available and remove the defaults. Replace
<clusterImageSet_NAME>
with the correct name:oc get clusterImageSets oc delete clusterImageSet <clusterImageSet_NAME>
View the list of currently available release images in the console when you are creating a cluster.
For information regarding other fields available through the ConfigMap
, view the cluster-image-set-controller GitHub repository README.
1.7.2.3. Maintaining a custom list of release images while disconnected
In some cases, you need to maintain a custom list of release images when the hub cluster has no Internet connection. You can create your own custom list of release images that are available when creating a cluster. Complete the following steps to manage your available release images while disconnected:
- When you are on a connected system, go to the acm-hive-openshift-releases GitHub repository to access the available cluster image sets.
-
Copy the
clusterImageSets
directory to a system that can access the disconnected multicluster engine operator cluster. Add the mapping between the managed cluster and the disconnected repository with your cluster image sets by completing the following steps that fits your managed cluster:
-
For an OpenShift Container Platform managed cluster, see Configuring image registry repository mirroring for information about using your
ImageContentSourcePolicy
object to complete the mapping. -
For a managed cluster that is not an OpenShift Container Platform cluster, use the
ManageClusterImageRegistry
custom resource definition to override the location of the image sets. See Specifying registry images on managed clusters for import for information about how to override the cluster for the mapping.
-
For an OpenShift Container Platform managed cluster, see Configuring image registry repository mirroring for information about using your
-
Add the YAML files for the images that you want available when you create a cluster by using the console or CLI to manually add the
clusterImageSet
YAML content. Modify the
clusterImageSet
YAML files for the remaining OpenShift Container Platform release images to reference the correct offline repository where you store the images. Your updates resemble the following example wherespec.releaseImage
refers to the image registry that you are using:apiVersion: hive.openshift.io/v1 kind: ClusterImageSet metadata: labels: channel: fast name: img4.15.8-x86-64-appsub spec: releaseImage: IMAGE_REGISTRY_IPADDRESS_or_DNSNAME/REPO_PATH/ocp-release:4.15.8-x86_64
Ensure that the images are loaded in the offline image registry that is referenced in the YAML file.
Note: If you are creating a hosted cluster for Red Hat OpenShift Virtualization, the
spec.releaseImage
name must end with-release
to make the OpenShift Container Platform version appear in the Release images drop-down list in the console.Create each of the
clusterImageSets
by entering the following command for each YAML file:oc create -f <clusterImageSet_FILE>
Replace
clusterImageSet_FILE
with the name of the cluster image set file. For example:oc create -f img4.11.9-x86_64.yaml
After running this command for each resource you want to add, the list of available release images are available.
-
Alternately you can paste the image URL directly in the create cluster console. Adding the image URL creates new
clusterImageSets
if they do not exist. - View the list of currently available release images in the console when you are creating a cluster.
1.7.3. Creating clusters
Learn how to create Red Hat OpenShift Container Platform clusters across cloud providers with multicluster engine operator.
multicluster engine operator uses the Hive operator that is provided with OpenShift Container Platform to provision clusters for all providers except the on-premises clusters and hosted control planes. When provisioning the on-premises clusters, multicluster engine operator uses the central infrastructure management and Assisted Installer function that are provided with OpenShift Container Platform. The hosted clusters for hosted control planes are provisioned by using the HyperShift operator.
- Configuring additional manifests during cluster creation
- Creating a cluster on Amazon Web Services
- Creating a cluster on Amazon Web Services GovCloud
- Creating a cluster on Microsoft Azure
- Creating a cluster on Google Cloud Platform
- Creating a cluster on VMware vSphere
- Creating a cluster on Red Hat OpenStack Platform
- Creating a cluster in an on-premises environment
- Creating a cluster in a proxy environment
- Configuring AgentClusterInstall proxy
1.7.3.1. Creating a cluster with the CLI
The multicluster engine for Kubernetes operator uses internal Hive components to create Red Hat OpenShift Container Platform clusters. See the following information to learn how to create clusters.
1.7.3.1.1. Prerequisites
Before creating a cluster, you must clone the clusterImageSets repository and apply it to your hub cluster. See the following steps:
Run the following command to clone, but replace
2.x
with 2.7:git clone https://github.com/stolostron/acm-hive-openshift-releases.git cd acm-hive-openshift-releases git checkout origin/backplane-<2.x>
Run the following command to apply it to your hub cluster:
find clusterImageSets/fast -type d -exec oc apply -f {} \; 2> /dev/null
Select the Red Hat OpenShift Container Platform release images when you create a cluster.
Note: If you use the Nutanix platform, be sure to use x86_64
architecture for the releaseImage
in the ClusterImageSet
resource and set the visible
label value to 'true'
. See the following example:
apiVersion: hive.openshift.io/v1 kind: ClusterImageSet metadata: labels: channel: stable visible: 'true' name: img4.x.47-x86-64-appsub spec: releaseImage: quay.io/openshift-release-dev/ocp-release:4.x.47-x86_64
1.7.3.1.2. Create a cluster with ClusterDeployment
A ClusterDeployment
is a Hive custom resource that is used to control the lifecycle of a cluster.
Follow the Using Hive documentation to create the ClusterDeployment
custom resource and create an individual cluster.
1.7.3.1.3. Create a cluster with ClusterPool
A ClusterPool
is also a Hive custom resource that is used to create multiple clusters.
Follow the Cluster Pools documentation to create a cluster with the Hive ClusterPool
API.
1.7.3.2. Configuring additional manifests during cluster creation
You can configure additional Kubernetes resource manifests during the installation process of creating your cluster. This can help if you need to configure additional manifests for scenarios such as configuring networking or setting up a load balancer.
1.7.3.2.1. Prerequisite
Add a reference to the ClusterDeployment
resource that specifies a config map resource that contains the additional resource manifests.
Note: The ClusterDeployment
resource and the config map must be in the same namespace.
1.7.3.2.2. Configuring additional manifests during cluster creation by using examples
If you want to configure additional manifests by using a config map with resource manifests, complete the following steps:
Create a YAML file and add the following example content:
kind: ConfigMap apiVersion: v1 metadata: name: <my-baremetal-cluster-install-manifests> namespace: <mynamespace> data: 99_metal3-config.yaml: | kind: ConfigMap apiVersion: v1 metadata: name: metal3-config namespace: openshift-machine-api data: http_port: "6180" provisioning_interface: "enp1s0" provisioning_ip: "172.00.0.3/24" dhcp_range: "172.00.0.10,172.00.0.100" deploy_kernel_url: "http://172.00.0.3:6180/images/ironic-python-agent.kernel" deploy_ramdisk_url: "http://172.00.0.3:6180/images/ironic-python-agent.initramfs" ironic_endpoint: "http://172.00.0.3:6385/v1/" ironic_inspector_endpoint: "http://172.00.0.3:5150/v1/" cache_url: "http://192.168.111.1/images" rhcos_image_url: "https://releases-art-rhcos.svc.ci.openshift.org/art/storage/releases/rhcos-4.3/43.81.201911192044.0/x86_64/rhcos-43.81.201911192044.0-openstack.x86_64.qcow2.gz"
Note: The example
ConfigMap
contains a manifest with anotherConfigMap
resource. The resource manifestConfigMap
can contain multiple keys with resource configurations added in the following pattern,data.<resource_name>\.yaml
.Apply the file by running the following command:
oc apply -f <filename>.yaml
If you want to configure additional manifests by using a
ClusterDeployment
by referencing a resource manifestConfigMap
, complete the following steps:Create a YAML file and add the following example content. The resource manifest
ConfigMap
is referenced inspec.provisioning.manifestsConfigMapRef
:apiVersion: hive.openshift.io/v1 kind: ClusterDeployment metadata: name: <my-baremetal-cluster> namespace: <mynamespace> annotations: hive.openshift.io/try-install-once: "true" spec: baseDomain: test.example.com clusterName: <my-baremetal-cluster> controlPlaneConfig: servingCertificates: {} platform: baremetal: libvirtSSHPrivateKeySecretRef: name: provisioning-host-ssh-private-key provisioning: installConfigSecretRef: name: <my-baremetal-cluster-install-config> sshPrivateKeySecretRef: name: <my-baremetal-hosts-ssh-private-key> manifestsConfigMapRef: name: <my-baremetal-cluster-install-manifests> imageSetRef: name: <my-clusterimageset> sshKnownHosts: - "10.1.8.90 ecdsa-sha2-nistp256 AAAAE2VjZHNhLXvVVVKUYVkuyvkuygkuyTCYTytfkufTYAAAAIbmlzdHAyNTYAAABBBKWjJRzeUVuZs4yxSy4eu45xiANFIIbwE3e1aPzGD58x/NX7Yf+S8eFKq4RrsfSaK2hVJyJjvVIhUsU9z2sBJP8=" pullSecretRef: name: <my-baremetal-cluster-pull-secret>
Apply the file by running the following command:
oc apply -f <filename>.yaml
1.7.3.3. Creating a cluster on Amazon Web Services
You can use the multicluster engine operator console to create a Red Hat OpenShift Container Platform cluster on Amazon Web Services (AWS).
When you create a cluster, the creation process uses the OpenShift Container Platform installer with the Hive resource. If you have questions about cluster creation after completing this procedure, see Installing on AWS in the OpenShift Container Platform documentation for more information about the process.
1.7.3.3.1. Prerequisites
See the following prerequisites before creating a cluster on AWS:
- You must have a deployed hub cluster.
- You need an AWS credential. See Creating a credential for Amazon Web Services for more information.
- You need a configured domain in AWS. See Configuring an AWS account for instructions on how to configure a domain.
- You must have Amazon Web Services (AWS) login credentials, which include user name, password, access key ID, and secret access key. See Understanding and Getting Your Security Credentials.
You must have an OpenShift Container Platform image pull secret. See Using image pull secrets.
Note: If you change your cloud provider access key on the cloud provider, you also need to manually update the corresponding credential for the cloud provider on the console. This is required when your credentials expire on the cloud provider where the managed cluster is hosted and you try to delete the managed cluster.
1.7.3.3.2. Creating your AWS cluster
See the following important information about creating an AWS cluster:
-
When you review your information and optionally customize it before creating the cluster, you can select YAML: On to view the
install-config.yaml
file content in the panel. You can edit the YAML file with your custom settings, if you have any updates. - When you create a cluster, the controller creates a namespace for the cluster and the resources. Ensure that you include only resources for that cluster instance in that namespace.
- Destroying the cluster deletes the namespace and all of the resources in it.
-
If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have
cluster-admin
privileges when you are creating the cluster, you must select a cluster set on which you haveclusterset-admin
permissions. -
If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with
clusterset-admin
permissions to a cluster set if you do not have any cluster set options to select. -
Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a
ManagedClusterSet
, it is automatically added to thedefault
managed cluster set. - If there is already a base DNS domain that is associated with the selected credential that you configured with your AWS account, that value is populated in the field. You can change the value by overwriting it. This name is used in the hostname of the cluster.
- The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. Select the image from the list of images that are available. If the image that you want to use is not available, you can enter the URL to the image that you want to use.
The node pools include the control plane pool and the worker pools. The control plane nodes share the management of the cluster activity. The information includes the following fields:
- Region: Specify the region where you want the node pool.
- CPU architecture: If the architecture type of the managed cluster is not the same as the architecture of your hub cluster, enter a value for the instruction set architecture of the machines in the pool. Valid values are amd64, ppc64le, s390x, and arm64.
- Zones: Specify where you want to run your control plane pools. You can select multiple zones within the region for a more distributed group of control plane nodes. A closer zone might provide faster performance, but a more distant zone might be more distributed.
- Instance type: Specify the instance type for your control plane node. You can change the type and size of your instance after it is created.
- Root storage: Specify the amount of root storage to allocate for the cluster.
You can create zero or more worker nodes in a worker pool to run the container workloads for the cluster. This can be in a single worker pool, or distributed across multiple worker pools. If zero worker nodes are specified, the control plane nodes also function as worker nodes. The optional information includes the following fields:
- Zones: Specify where you want to run your worker pools. You can select multiple zones within the region for a more distributed group of nodes. A closer zone might provide faster performance, but a more distant zone might be more distributed.
- Instance type: Specify the instance type of your worker pools. You can change the type and size of your instance after it is created.
- Node count: Specify the node count of your worker pool. This setting is required when you define a worker pool.
- Root storage: Specify the amount of root storage allocated for your worker pool. This setting is required when you define a worker pool.
- Networking details are required for your cluster, and multiple networks are required for using IPv6. You can add an additional network by clicking Add network.
Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:
-
HTTP proxy: Specify the URL that should be used as a proxy for
HTTP
traffic. -
HTTPS proxy: Specify the secure proxy URL that should be used for
HTTPS
traffic. If no value is provided, the same value as theHTTP Proxy URL
is used for bothHTTP
andHTTPS
. -
No proxy sites: A comma-separated list of sites that should bypass the proxy. Begin a domain name with a period
.
to include all of the subdomains that are in that domain. Add an asterisk*
to bypass the proxy for all destinations. - Additional trust bundle: One or more additional CA certificates that are required for proxying HTTPS connections.
-
HTTP proxy: Specify the URL that should be used as a proxy for
1.7.3.3.3. Creating your cluster with the console
To create a new cluster, see the following procedure. If you have an existing cluster that you want to import instead, see Cluster import.
Note: You do not have to run the oc
command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of multicluster engine operator.
- Navigate to Infrastructure > Clusters.
- On the Clusters page. Click Cluster > Create cluster and complete the steps in the console.
- Optional: Select YAML: On to view content updates as you enter the information in the console.
If you need to create a credential, see Creating a credential for Amazon Web Services for more information.
The name of the cluster is used in the hostname of the cluster.
If you are using Red Hat Advanced Cluster Management for Kubernetes and want to configure your managed cluster klusterlet to run on specific nodes, see Optional: Configuring the klusterlet to run on specific nodes for the required steps.
1.7.3.3.4. Additional resources
- The AWS private configuration information is used when you are creating an AWS GovCloud cluster. See Creating a cluster on Amazon Web Services GovCloud for information about creating a cluster in that environment.
- See Configuring an AWS account for more information.
- See Release images for more information about release images.
- Find more information about supported instant types by visiting your cloud provider sites, such as AWS General purpose instances.
1.7.3.4. Creating a cluster on Amazon Web Services GovCloud
You can use the console to create a Red Hat OpenShift Container Platform cluster on Amazon Web Services (AWS) or on AWS GovCloud. This procedure explains how to create a cluster on AWS GovCloud. See Creating a cluster on Amazon Web Services for the instructions for creating a cluster on AWS.
AWS GovCloud provides cloud services that meet additional requirements that are necessary to store government documents on the cloud. When you create a cluster on AWS GovCloud, you must complete additional steps to prepare your environment.
When you create a cluster, the creation process uses the OpenShift Container Platform installer with the Hive resource. If you have questions about cluster creation after completing this procedure, see Installing a cluster on AWS into a government region in the OpenShift Container Platform documentation for more information about the process. The following sections provide the steps for creating a cluster on AWS GovCloud:
1.7.3.4.1. Prerequisites
You must have the following prerequisites before creating an AWS GovCloud cluster:
- You must have AWS login credentials, which include user name, password, access key ID, and secret access key. See Understanding and Getting Your Security Credentials.
- You need an AWS credential. See Creating a credential for Amazon Web Services for more information.
- You need a configured domain in AWS. See Configuring an AWS account for instructions on how to configure a domain.
- You must have an OpenShift Container Platform image pull secret. See Using image pull secrets.
- You must have an Amazon Virtual Private Cloud (VPC) with an existing Red Hat OpenShift Container Platform cluster for the hub cluster. This VPC must be different from the VPCs that are used for the managed cluster resources or the managed cluster service endpoints.
- You need a VPC where the managed cluster resources are deployed. This cannot be the same as the VPCs that are used for the hub cluster or the managed cluster service endpoints.
- You need one or more VPCs that provide the managed cluster service endpoints. This cannot be the same as the VPCs that are used for the hub cluster or the managed cluster resources.
- Ensure that the IP addresses of the VPCs that are specified by Classless Inter-Domain Routing (CIDR) do not overlap.
-
You need a
HiveConfig
custom resource that references a credential within the Hive namespace. This custom resource must have access to create resources on the VPC that you created for the managed cluster service endpoints.
Note: If you change your cloud provider access key on the cloud provider, you also need to manually update the corresponding credential for the cloud provider on the multicluster engine operator console. This is required when your credentials expire on the cloud provider where the managed cluster is hosted and you try to delete the managed cluster.
1.7.3.4.2. Configure Hive to deploy on AWS GovCloud
While creating a cluster on AWS GovCloud is almost identical to creating a cluster on standard AWS, you have to complete some additional steps to prepare an AWS PrivateLink for the cluster on AWS GovCloud.
1.7.3.4.2.1. Create the VPCs for resources and endpoints
As listed in the prerequisites, two VPCs are required in addition to the VPC that contains the hub cluster. See Create a VPC in the Amazon Web Services documentation for specific steps for creating a VPC.
- Create a VPC for the managed cluster with private subnets.
- Create one or more VPCs for the managed cluster service endpoints with private subnets. Each VPC in a region has a limit of 255 VPC endpoints, so you need multiple VPCs to support more than 255 clusters in that region.
For each VPC, create subnets in all of the supported availability zones of the region. Each subnet must have at least 255 usable IP addresses because of the controller requirements.
The following example shows how you might structure subnets for VPCs that have 6 availability zones in the
us-gov-east-1
region:vpc-1 (us-gov-east-1) : 10.0.0.0/20 subnet-11 (us-gov-east-1a): 10.0.0.0/23 subnet-12 (us-gov-east-1b): 10.0.2.0/23 subnet-13 (us-gov-east-1c): 10.0.4.0/23 subnet-12 (us-gov-east-1d): 10.0.8.0/23 subnet-12 (us-gov-east-1e): 10.0.10.0/23 subnet-12 (us-gov-east-1f): 10.0.12.0/2
vpc-2 (us-gov-east-1) : 10.0.16.0/20 subnet-21 (us-gov-east-1a): 10.0.16.0/23 subnet-22 (us-gov-east-1b): 10.0.18.0/23 subnet-23 (us-gov-east-1c): 10.0.20.0/23 subnet-24 (us-gov-east-1d): 10.0.22.0/23 subnet-25 (us-gov-east-1e): 10.0.24.0/23 subnet-26 (us-gov-east-1f): 10.0.28.0/23
- Ensure that all of the hub environments (hub cluster VPCs) have network connectivity to the VPCs that you created for VPC endpoints that use peering, transit gateways, and that all DNS settings are enabled.
- Collect a list of VPCs that are needed to resolve the DNS setup for the AWS PrivateLink, which is required for the AWS GovCloud connectivity. This includes at least the VPC of the multicluster engine operator instance that you are configuring, and can include the list of all of the VPCs where various Hive controllers exist.
1.7.3.4.2.2. Configure the security groups for the VPC endpoints
Each VPC endpoint in AWS has a security group attached to control access to the endpoint. When Hive creates a VPC endpoint, it does not specify a security group. The default security group of the VPC is attached to the VPC endpoint. The default security group of the VPC must have rules to allow traffic where VPC endpoints are created from the Hive installer pods. See Control access to VPC endpoints using endpoint policies in the AWS documentation for details.
For example, if Hive is running in hive-vpc(10.1.0.0/16)
, there must be a rule in the default security group of the VPC where the VPC endpoint is created that allows ingress from 10.1.0.0/16
.
1.7.3.4.2.3. Set permissions for AWS PrivateLink
You need multiple credentials to configure the AWS PrivateLink. The required permissions for these credentials depend on the type of credential.
The credentials for ClusterDeployment require the following permissions:
ec2:CreateVpcEndpointServiceConfiguration ec2:DescribeVpcEndpointServiceConfigurations ec2:ModifyVpcEndpointServiceConfiguration ec2:DescribeVpcEndpointServicePermissions ec2:ModifyVpcEndpointServicePermissions ec2:DeleteVpcEndpointServiceConfigurations
The credentials for HiveConfig for endpoint VPCs account
.spec.awsPrivateLink.credentialsSecretRef
require the following permissions:ec2:DescribeVpcEndpointServices ec2:DescribeVpcEndpoints ec2:CreateVpcEndpoint ec2:CreateTags ec2:DescribeNetworkInterfaces ec2:DescribeVPCs ec2:DeleteVpcEndpoints route53:CreateHostedZone route53:GetHostedZone route53:ListHostedZonesByVPC route53:AssociateVPCWithHostedZone route53:DisassociateVPCFromHostedZone route53:CreateVPCAssociationAuthorization route53:DeleteVPCAssociationAuthorization route53:ListResourceRecordSets route53:ChangeResourceRecordSets route53:DeleteHostedZone
The credentials specified in the
HiveConfig
custom resource for associating VPCs to the private hosted zone (.spec.awsPrivateLink.associatedVPCs[$idx].credentialsSecretRef
). The account where the VPC is located requires the following permissions:route53:AssociateVPCWithHostedZone route53:DisassociateVPCFromHostedZone ec2:DescribeVPCs
Ensure that there is a credential secret within the Hive namespace on the hub cluster.
The HiveConfig
custom resource needs to reference a credential within the Hive namespace that has permissions to create resources in a specific provided VPC. If the credential that you are using to provision an AWS cluster in AWS GovCloud is already in the Hive namespace, then you do not need to create another one. If the credential that you are using to provision an AWS cluster in AWS GovCloud is not already in the Hive namespace, you can either replace your current credential or create an additional credential in the Hive namespace.
The HiveConfig
custom resource needs to include the following content:
- An AWS GovCloud credential that has the required permissions to provision resources for the given VPC.
The addresses of the VPCs for the OpenShift Container Platform cluster installation, as well as the service endpoints for the managed cluster.
Best practice: Use different VPCs for the OpenShift Container Platform cluster installation and the service endpoints.
The following example shows the credential content:
spec: awsPrivateLink: ## The list of inventory of VPCs that can be used to create VPC ## endpoints by the controller. endpointVPCInventory: - region: us-east-1 vpcID: vpc-1 subnets: - availabilityZone: us-east-1a subnetID: subnet-11 - availabilityZone: us-east-1b subnetID: subnet-12 - availabilityZone: us-east-1c subnetID: subnet-13 - availabilityZone: us-east-1d subnetID: subnet-14 - availabilityZone: us-east-1e subnetID: subnet-15 - availabilityZone: us-east-1f subnetID: subnet-16 - region: us-east-1 vpcID: vpc-2 subnets: - availabilityZone: us-east-1a subnetID: subnet-21 - availabilityZone: us-east-1b subnetID: subnet-22 - availabilityZone: us-east-1c subnetID: subnet-23 - availabilityZone: us-east-1d subnetID: subnet-24 - availabilityZone: us-east-1e subnetID: subnet-25 - availabilityZone: us-east-1f subnetID: subnet-26 ## The credentialsSecretRef points to a secret with permissions to create. ## The resources in the account where the inventory of VPCs exist. credentialsSecretRef: name: <hub-account-credentials-secret-name> ## A list of VPC where various mce clusters exists. associatedVPCs: - region: region-mce1 vpcID: vpc-mce1 credentialsSecretRef: name: <credentials-that-have-access-to-account-where-MCE1-VPC-exists> - region: region-mce2 vpcID: vpc-mce2 credentialsSecretRef: name: <credentials-that-have-access-to-account-where-MCE2-VPC-exists>
You can include a VPC from all the regions where AWS PrivateLink is supported in the endpointVPCInventory
list. The controller selects a VPC that meets the requirements for the ClusterDeployment.
For more information, refer to the Hive documentation.
1.7.3.4.3. Creating your cluster with the console
To create a cluster from the console, navigate to Infrastructure > Clusters > Create cluster AWS > Standalone and complete the steps in the console.
Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Cluster import for those steps.
The credential that you select must have access to the resources in an AWS GovCloud region, if you create an AWS GovCloud cluster. You can use an AWS GovCloud secret that is already in the Hive namespace if it has the required permissions to deploy a cluster. Existing credentials are displayed in the console. If you need to create a credential, see Creating a credential for Amazon Web Services for more information.
The name of the cluster is used in the hostname of the cluster.
Important: When you create a cluster, the controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.
Tip: Select YAML: On to view content updates as you enter the information in the console.
If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin
privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin
permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin
permissions to a cluster set if you do not have any cluster set options to select.
Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet
, it is automatically added to the default
managed cluster set.
If there is already a base DNS domain that is associated with the selected credential that you configured with your AWS or AWS GovCloud account, that value is populated in the field. You can change the value by overwriting it. This name is used in the hostname of the cluster. See Configuring an AWS account for more information.
The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images.
The node pools include the control plane pool and the worker pools. The control plane nodes share the management of the cluster activity. The information includes the following fields:
-
Region: The region where you create your cluster resources. If you are creating a cluster on an AWS GovCloud provider, you must include an AWS GovCloud region for your node pools. For example,
us-gov-west-1
. - CPU architecture: If the architecture type of the managed cluster is not the same as the architecture of your hub cluster, enter a value for the instruction set architecture of the machines in the pool. Valid values are amd64, ppc64le, s390x, and arm64.
- Zones: Specify where you want to run your control plane pools. You can select multiple zones within the region for a more distributed group of control plane nodes. A closer zone might provide faster performance, but a more distant zone might be more distributed.
- Instance type: Specify the instance type for your control plane node, which must be the same as the CPU architecture that you previously indicated. You can change the type and size of your instance after it is created.
- Root storage: Specify the amount of root storage to allocate for the cluster.
You can create zero or more worker nodes in a worker pool to run the container workloads for the cluster. They can be in a single worker pool, or distributed across multiple worker pools. If zero worker nodes are specified, the control plane nodes also function as worker nodes. The optional information includes the following fields:
- Pool name: Provide a unique name for your pool.
- Zones: Specify where you want to run your worker pools. You can select multiple zones within the region for a more distributed group of nodes. A closer zone might provide faster performance, but a more distant zone might be more distributed.
- Instance type: Specify the instance type of your worker pools. You can change the type and size of your instance after it is created.
- Node count: Specify the node count of your worker pool. This setting is required when you define a worker pool.
- Root storage: Specify the amount of root storage allocated for your worker pool. This setting is required when you define a worker pool.
Networking details are required for your cluster, and multiple networks are required for using IPv6. For an AWS GovCloud cluster, enter the values of the block of addresses of the Hive VPC in the Machine CIDR field. You can add an additional network by clicking Add network.
Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:
-
HTTP proxy URL: Specify the URL that should be used as a proxy for
HTTP
traffic. -
HTTPS proxy URL: Specify the secure proxy URL that should be used for
HTTPS
traffic. If no value is provided, the same value as theHTTP Proxy URL
is used for bothHTTP
andHTTPS
. -
No proxy domains: A comma-separated list of domains that should bypass the proxy. Begin a domain name with a period
.
to include all of the subdomains that are in that domain. Add an asterisk*
to bypass the proxy for all destinations. - Additional trust bundle: One or more additional CA certificates that are required for proxying HTTPS connections.
When creating an AWS GovCloud cluster or using a private environment, complete the fields on the AWS private configuration page with the AMI ID and the subnet values. Ensure that the value of spec:platform:aws:privateLink:enabled
is set to true
in the ClusterDeployment.yaml
file, which is automatically set when you select Use private configuration.
When you review your information and optionally customize it before creating the cluster, you can select YAML: On to view the install-config.yaml
file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.
Note: You do not have to run the oc
command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of multicluster engine for Kubernetes operator.
If you are using Red Hat Advanced Cluster Management for Kubernetes and want to configure your managed cluster klusterlet to run on specific nodes, see Optional: Configuring the klusterlet to run on specific nodes for the required steps.
Continue with Accessing your cluster for instructions for accessing your cluster.
1.7.3.5. Creating a cluster on Microsoft Azure
You can use the multicluster engine operator console to deploy a Red Hat OpenShift Container Platform cluster on Microsoft Azure or on Microsoft Azure Government.
When you create a cluster, the creation process uses the OpenShift Container Platform installer with the Hive resource. If you have questions about cluster creation after completing this procedure, see Installing on Azure in the OpenShift Container Platform documentation for more information about the process.
1.7.3.5.1. Prerequisites
See the following prerequisites before creating a cluster on Azure:
- You must have a deployed hub cluster.
- You need an Azure credential. See Creating a credential for Microsoft Azure for more information.
- You need a configured domain in Azure or Azure Government. See Configuring a custom domain name for an Azure cloud service for instructions on how to configure a domain.
- You need Azure login credentials, which include user name and password. See the Microsoft Azure Portal.
-
You need Azure service principals, which include
clientId
,clientSecret
, andtenantId
. See azure.microsoft.com. - You need an OpenShift Container Platform image pull secret. See Using image pull secrets.
Note: If you change your cloud provider access key on the cloud provider, you also need to manually update the corresponding credential for the cloud provider on the console of multicluster engine operator. This is required when your credentials expire on the cloud provider where the managed cluster is hosted and you try to delete the managed cluster.
1.7.3.5.2. Creating your cluster with the console
To create a cluster from the multicluster engine operator console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.
Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Cluster import for those steps.
If you need to create a credential, see Creating a credential for Microsoft Azure for more information.
The name of the cluster is used in the hostname of the cluster.
Important: When you create a cluster, the controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.
Tip: Select YAML: On to view content updates as you enter the information in the console.
If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin
privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin
permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin
permissions to a cluster set if you do not have any cluster set options to select.
Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet
, it is automatically added to the default
managed cluster set.
If there is already a base DNS domain that is associated with the selected credential that you configured for your Azure account, that value is populated in that field. You can change the value by overwriting it. See Configuring a custom domain name for an Azure cloud service for more information. This name is used in the hostname of the cluster.
The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images.
The Node pools include the control plane pool and the worker pools. The control plane nodes share the management of the cluster activity. The information includes the following optional fields:
- Region: Specify a region where you want to run your node pools. You can select multiple zones within the region for a more distributed group of control plane nodes. A closer zone might provide faster performance, but a more distant zone might be more distributed.
- CPU architecture: If the architecture type of the managed cluster is not the same as the architecture of your hub cluster, enter a value for the instruction set architecture of the machines in the pool. Valid values are amd64, ppc64le, s390x, and arm64.
You can change the type and size of the Instance type and Root storage allocation (required) of your control plane pool after your cluster is created.
You can create one or more worker nodes in a worker pool to run the container workloads for the cluster. They can be in a single worker pool, or distributed across multiple worker pools. If zero worker nodes are specified, the control plane nodes also function as worker nodes. The information includes the following fields:
- Zones: Specifies here you want to run your worker pools. You can select multiple zones within the region for a more distributed group of nodes. A closer zone might provide faster performance, but a more distant zone might be more distributed.
- Instance type: You can change the type and size of your instance after it is created.
You can add an additional network by clicking Add network. You must have more than one network if you are using IPv6 addresses.
Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:
-
HTTP proxy: The URL that should be used as a proxy for
HTTP
traffic. -
HTTPS proxy: The secure proxy URL that should be used for
HTTPS
traffic. If no value is provided, the same value as theHTTP Proxy URL
is used for bothHTTP
andHTTPS
. -
No proxy: A comma-separated list of domains that should bypass the proxy. Begin a domain name with a period
.
to include all of the subdomains that are in that domain. Add an asterisk*
to bypass the proxy for all destinations. - Additional trust bundle: One or more additional CA certificates that are required for proxying HTTPS connections.
When you review your information and optionally customize it before creating the cluster, you can click the YAML switch On to view the install-config.yaml
file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.
If you are using Red Hat Advanced Cluster Management for Kubernetes and want to configure your managed cluster klusterlet to run on specific nodes, see Optional: Configuring the klusterlet to run on specific nodes for the required steps.
Note: You do not have to run the oc
command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of multicluster engine operator.
Continue with Accessing your cluster for instructions for accessing your cluster.
1.7.3.6. Creating a cluster on Google Cloud Platform
Follow the procedure to create a Red Hat OpenShift Container Platform cluster on Google Cloud Platform (GCP). For more information about GCP, see Google Cloud Platform.
When you create a cluster, the creation process uses the OpenShift Container Platform installer with the Hive resource. If you have questions about cluster creation after completing this procedure, see Installing on GCP in the OpenShift Container Platform documentation for more information about the process.
1.7.3.6.1. Prerequisites
See the following prerequisites before creating a cluster on GCP:
- You must have a deployed hub cluster.
- You must have a GCP credential. See Creating a credential for Google Cloud Platform for more information.
- You must have a configured domain in GCP. See Setting up a custom domain for instructions on how to configure a domain.
- You need your GCP login credentials, which include user name and password.
- You must have an OpenShift Container Platform image pull secret. See Using image pull secrets.
Note: If you change your cloud provider access key on the cloud provider, you also need to manually update the corresponding credential for the cloud provider on the console of multicluster engine operator. This is required when your credentials expire on the cloud provider where the managed cluster is hosted and you try to delete the managed cluster.
1.7.3.6.2. Creating your cluster with the console
To create clusters from the multicluster engine operator console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.
Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Cluster import for those steps.
If you need to create a credential, see Creating a credential for Google Cloud Platform for more information.
The name of your cluster is used in the hostname of the cluster. There are some restrictions that apply to naming your GCP cluster. These restrictions include not beginning the name with goog
or containing a group of letters and numbers that resemble google
anywhere in the name. See Bucket naming guidelines for the complete list of restrictions.
Important: When you create a cluster, the controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.
Tip: Select YAML: On to view content updates as you enter the information in the console.
If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin
privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin
permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin
permissions to a cluster set if you do not have any cluster set options to select.
Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet
, it is automatically added to the default
managed cluster set.
If there is already a base DNS domain that is associated with the selected credential for your GCP account, that value is populated in the field. You can change the value by overwriting it. See Setting up a custom domain for more information. This name is used in the hostname of the cluster.
The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images.
The Node pools include the control plane pool and the worker pools. The control plane nodes share the management of the cluster activity. The information includes the following fields:
- Region: Specify a region where you want to run your control plane pools. A closer region might provide faster performance, but a more distant region might be more distributed.
- CPU architecture: If the architecture type of the managed cluster is not the same as the architecture of your hub cluster, enter a value for the instruction set architecture of the machines in the pool. Valid values are amd64, ppc64le, s390x, and arm64.
You can specify the instance type of your control plane pool. You can change the type and size of your instance after it is created.
You can create one or more worker nodes in a worker pool to run the container workloads for the cluster. They can be in a single worker pool, or distributed across multiple worker pools. If zero worker nodes are specified, the control plane nodes also function as worker nodes. The information includes the following fields:
- Instance type: You can change the type and size of your instance after it is created.
- Node count: This setting is required when you define a worker pool.
The networking details are required, and multiple networks are required for using IPv6 addresses. You can add an additional network by clicking Add network.
Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:
-
HTTP proxy: The URL that should be used as a proxy for
HTTP
traffic. -
HTTPS proxy: The secure proxy URL that should be used for
HTTPS
traffic. If no value is provided, the same value as theHTTP Proxy URL
is used for bothHTTP
andHTTPS
. -
No proxy sites: A comma-separated list of sites that should bypass the proxy. Begin a domain name with a period
.
to include all of the subdomains that are in that domain. Add an asterisk*
to bypass the proxy for all destinations. - Additional trust bundle: One or more additional CA certificates that are required for proxying HTTPS connections.
When you review your information and optionally customize it before creating the cluster, you can select YAML: On to view the install-config.yaml
file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.
If you are using Red Hat Advanced Cluster Management for Kubernetes and want to configure your managed cluster klusterlet to run on specific nodes, see Optional: Configuring the klusterlet to run on specific nodes for the required steps.
Note: You do not have to run the oc
command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of multicluster engine operator.
Continue with Accessing your cluster for instructions for accessing your cluster.
1.7.3.7. Creating a cluster on VMware vSphere
You can use the multicluster engine operator console to deploy a Red Hat OpenShift Container Platform cluster on VMware vSphere.
When you create a cluster, the creation process uses the OpenShift Container Platform installer with the Hive resource. If you have questions about cluster creation after completing this procedure, see Installing on vSphere in the OpenShift Container Platform documentation for more information about the process.
1.7.3.7.1. Prerequisites
See the following prerequisites before creating a cluster on vSphere:
- You must have a hub cluster that is deployed on a supported OpenShift Container Platform version.
- You need a vSphere credential. See Creating a credential for VMware vSphere for more information.
- You need an OpenShift Container Platform image pull secret. See Using image pull secrets.
You must have the following information for the VMware instance where you are deploying:
- Required static IP addresses for API and Ingress instances
DNS records for:
The following API base domain must point to the static API VIP:
api.<cluster_name>.<base_domain>
The following application base domain must point to the static IP address for Ingress VIP:
*.apps.<cluster_name>.<base_domain>
1.7.3.7.2. Creating your cluster with the console
To create a cluster from the multicluster engine operator console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.
Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Cluster import for those steps.
If you need to create a credential, see Creating a credential for VMware vSphere for more information about creating a credential.
The name of your cluster is used in the hostname of the cluster.
Important: When you create a cluster, the controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.
Tip: Select YAML: On to view content updates as you enter the information in the console.
If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin
privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin
permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin
permissions to a cluster set if you do not have any cluster set options to select.
Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet
, it is automatically added to the default
managed cluster set.
If there is already a base domain associated with the selected credential that you configured for your vSphere account, that value is populated in the field. You can change the value by overwriting it. See Installing a cluster on vSphere with customizations for more information. This value must match the name that you used to create the DNS records listed in the prerequisites section. This name is used in the hostname of the cluster.
The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images.
Note: Release images for OpenShift Container Platform versions 4.15 and later are supported.
The node pools include the control plane pool and the worker pools. The control plane nodes share the management of the cluster activity. The information includes the CPU architecture field. View the following field description:
- CPU architecture: If the architecture type of the managed cluster is not the same as the architecture of your hub cluster, enter a value for the instruction set architecture of the machines in the pool. Valid values are amd64, ppc64le, s390x, and arm64.
You can create one or more worker nodes in a worker pool to run the container workloads for the cluster. They can be in a single worker pool, or distributed across multiple worker pools. If zero worker nodes are specified, the control plane nodes also function as worker nodes. The information includes Cores per socket, CPUs, Memory_min MiB, _Disk size in GiB, and Node count.
Networking information is required. Multiple networks are required for using IPv6. Some of the required networking information is included the following fields:
- vSphere network name: Specify the VMware vSphere network name.
API VIP: Specify the IP address to use for internal API communication.
Note: This value must match the name that you used to create the DNS records listed in the prerequisites section. If not provided, the DNS must be pre-configured so that
api.
resolves correctly.Ingress VIP: Specify the IP address to use for ingress traffic.
Note: This value must match the name that you used to create the DNS records listed in the prerequisites section. If not provided, the DNS must be pre-configured so that
test.apps.
resolves correctly.
You can add an additional network by clicking Add network. You must have more than one network if you are using IPv6 addresses.
Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:
-
HTTP proxy: Specify the URL that should be used as a proxy for
HTTP
traffic. -
HTTPS proxy: Specify the secure proxy URL that should be used for
HTTPS
traffic. If no value is provided, the same value as theHTTP Proxy URL
is used for bothHTTP
andHTTPS
. -
No proxy sites: Provide a comma-separated list of sites that should bypass the proxy. Begin a domain name with a period
.
to include all of the subdomains that are in that domain. Add an asterisk*
to bypass the proxy for all destinations. - Additional trust bundle: One or more additional CA certificates that are required for proxying HTTPS connections.
You can define the disconnected installation image by clicking Disconnected installation. When creating a cluster by using Red Hat OpenStack Platform provider and disconnected installation, if a certificate is required to access the mirror registry, you must enter it in the Additional trust bundle field in the Configuration for disconnected installation section when configuring your credential or the Disconnected installation section when creating a cluster.
You can click Add automation template to create a template.
When you review your information and optionally customize it before creating the cluster, you can click the YAML switch On to view the install-config.yaml
file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.
If you are using Red Hat Advanced Cluster Management for Kubernetes and want to configure your managed cluster klusterlet to run on specific nodes, see Optional: Configuring the klusterlet to run on specific nodes for the required steps.
Note: You do not have to run the oc
command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of multicluster engine operator.
Continue with Accessing your cluster for instructions for accessing your cluster.
1.7.3.8. Creating a cluster on Red Hat OpenStack Platform
You can use the multicluster engine operator console to deploy a Red Hat OpenShift Container Platform cluster on Red Hat OpenStack Platform.
When you create a cluster, the creation process uses the OpenShift Container Platform installer with the Hive resource. If you have questions about cluster creation after completing this procedure, see Installing on OpenStack in the OpenShift Container Platform documentation for more information about the process.
1.7.3.8.1. Prerequisites
See the following prerequisites before creating a cluster on Red Hat OpenStack Platform:
- You must have a hub cluster that is deployed on OpenShift Container Platform version 4.6 or later.
- You must have a Red Hat OpenStack Platform credential. See Creating a credential for Red Hat OpenStack Platform for more information.
- You need an OpenShift Container Platform image pull secret. See Using image pull secrets.
You need the following information for the Red Hat OpenStack Platform instance where you are deploying:
-
Flavor name for the control plane and worker instances; for example,
m1.xlarge
- Network name for the external network to provide the floating IP addresses
- Required floating IP addresses for API and ingress instances
DNS records for:
The following API base domain must point to the floating IP address for the API:
api.<cluster_name>.<base_domain>
The following application base domain must point to the floating IP address for ingress:app-name:
*.apps.<cluster_name>.<base_domain>
-
Flavor name for the control plane and worker instances; for example,
1.7.3.8.2. Creating your cluster with the console
To create a cluster from the multicluster engine operator console, navigate to Infrastructure > Clusters. On the Clusters page, click Create cluster and complete the steps in the console.
Note: This procedure is for creating a cluster. If you have an existing cluster that you want to import, see Cluster import for those steps.
If you need to create a credential, see Creating a credential for Red Hat OpenStack Platform for more information.
The name of the cluster is used in the hostname of the cluster. The name must contain fewer than 15 characters. This value must match the name that you used to create the DNS records listed in the credential prerequisites section.
Important: When you create a cluster, the controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.
Tip: Select YAML: On to view content updates as you enter the information in the console.
If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin
privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin
permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin
permissions to a cluster set if you do not have any cluster set options to select.
Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet
, it is automatically added to the default
managed cluster set.
If there is already a base DNS domain that is associated with the selected credential that you configured for your Red Hat OpenStack Platform account, that value is populated in the field. You can change the value by overwriting it. See Managing domains in the Red Hat OpenStack Platform documentation for more information. This name is used in the hostname of the cluster.
The release image identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images for more information about release images. Only release images for OpenShift Container Platform versions 4.6.x and higher are supported.
The node pools include the control plane pool and the worker pools. The control plane nodes share the management of the cluster activity. If the architecture type of the managed cluster is not the same as the architecture of your hub cluster, enter a value for the instruction set architecture of the machines in the pool. Valid values are amd64, ppc64le, s390x, and arm64.
You must add an instance type for your control plane pool, but you can change the type and size of your instance after it is created.
You can create one or more worker nodes in a worker pool to run the container workloads for the cluster. They can be in a single worker pool, or distributed across multiple worker pools. If zero worker nodes are specified, the control plane nodes also function as worker nodes. The information includes the following fields:
- Instance type: You can change the type and size of your instance after it is created.
- Node count: Specify the node count for your worker pool. This setting is required when you define a worker pool.
Networking details are required for your cluster. You must provide the values for one or more networks for an IPv4 network. For an IPv6 network, you must define more than one network.
You can add an additional network by clicking Add network. You must have more than one network if you are using IPv6 addresses.
Proxy information that is provided in the credential is automatically added to the proxy fields. You can use the information as it is, overwrite it, or add the information if you want to enable a proxy. The following list contains the required information for creating a proxy:
-
HTTP proxy: Specify the URL that should be used as a proxy for
HTTP
traffic. -
HTTPS proxy: The secure proxy URL that should be used for
HTTPS
traffic. If no value is provided, the same value as theHTTP Proxy
is used for bothHTTP
andHTTPS
. -
No proxy: Define a comma-separated list of sites that should bypass the proxy. Begin a domain name with a period
.
to include all of the subdomains that are in that domain. Add an asterisk*
to bypass the proxy for all destinations. - Additional trust bundle: One or more additional CA certificates that are required for proxying HTTPS connections.
You can define the disconnected installation image by clicking Disconnected installation. When creating a cluster by using Red Hat OpenStack Platform provider and disconnected installation, if a certificate is required to access the mirror registry, you must enter it in the Additional trust bundle field in the Configuration for disconnected installation section when configuring your credential or the Disconnected installation section when creating a cluster.
When you review your information and optionally customize it before creating the cluster, you can click the YAML switch On to view the install-config.yaml
file content in the panel. You can edit the YAML file with your custom settings, if you have any updates.
When creating a cluster that uses an internal certificate authority (CA), you need to customize the YAML file for your cluster by completing the following steps:
With the YAML switch on at the review step, insert a
Secret
object at the top of the list with the CA certificate bundle. Note: If the Red Hat OpenStack Platform environment provides services using certificates signed by multiple authorities, the bundle must include the certificates to validate all of the required endpoints. The addition for a cluster namedocp3
resembles the following example:apiVersion: v1 kind: Secret type: Opaque metadata: name: ocp3-openstack-trust namespace: ocp3 stringData: ca.crt: | -----BEGIN CERTIFICATE----- <Base64 certificate contents here> -----END CERTIFICATE----- -----BEGIN CERTIFICATE----- <Base64 certificate contents here> -----END CERTIFICATE----
Modify the Hive
ClusterDeployment
object to specify the value ofcertificatesSecretRef
inspec.platform.openstack
, similar to the following example:platform: openstack: certificatesSecretRef: name: ocp3-openstack-trust credentialsSecretRef: name: ocp3-openstack-creds cloud: openstack
The previous example assumes that the cloud name in the
clouds.yaml
file isopenstack
.
If you are using Red Hat Advanced Cluster Management for Kubernetes and want to configure your managed cluster klusterlet to run on specific nodes, see Optional: Configuring the klusterlet to run on specific nodes for the required steps.
Note: You do not have to run the oc
command that is provided with the cluster details to import the cluster. When you create the cluster, it is automatically configured under the management of multicluster engine operator.
Continue with Accessing your cluster for instructions for accessing your cluster.
1.7.3.9. Creating a cluster in an on-premises environment
You can use the console to create on-premises Red Hat OpenShift Container Platform clusters. The clusters can be single-node OpenShift clusters, multi-node clusters, and compact three-node clusters on VMware vSphere, Red Hat OpenStack, Nutanix, or in a bare metal environment.
There is no platform integration with the platform where you install the cluster, as the platform value is set to platform=none
. A single-node OpenShift cluster contains only a single node, which hosts the control plane services and the user workloads. This configuration can be helpful when you want to minimize the resource footprint of the cluster.
You can also provision multiple single-node OpenShift clusters on edge resources by using the zero touch provisioning feature, which is a feature that is available with Red Hat OpenShift Container Platform. For more information about zero touch provisioning, see Clusters at the network far edge in the OpenShift Container Platform documentation.
1.7.3.9.1. Prerequisites
See the following prerequisites before creating a cluster in an on-premises environment:
- You must have a deployed hub cluster on a supported OpenShift Container Platform version.
- You need a configured infrastructure environment with a host inventory of configured hosts.
- You must have internet access for your hub cluster (connected), or a connection to an internal or mirror registry that has a connection to the internet (disconnected) to retrieve the required images for creating the cluster.
- You need a configured on-premises credential.
- You need an OpenShift Container Platform image pull secret. See Using image pull secrets.
You need the following DNS records:
The following API base domain must point to the static API VIP:
api.<cluster_name>.<base_domain>
The following application base domain must point to the static IP address for Ingress VIP:
*.apps.<cluster_name>.<base_domain>
1.7.3.9.2. Creating your cluster with the console
To create a cluster from the console, complete the following steps:
- Navigate to Infrastructure > Clusters.
- On the Clusters page, click Create cluster and complete the steps in the console.
- Select Host inventory as the type of cluster.
The following options are available for your assisted installation:
- Use existing discovered hosts: Select your hosts from a list of hosts that are in an existing host inventory.
- Discover new hosts: Discover hosts that are not already in an existing infrastructure environment. Discover your own hosts, rather than using one that is already in an infrastructure environment.
If you need to create a credential, see Creating a credential for an on-premises environment for more information.
The name for your cluster is used in the hostname of the cluster.
Important: When you create a cluster, the controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.
Note: Select YAML: On to view content updates as you enter the information in the console.
If you want to add your cluster to an existing cluster set, you must have the correct permissions on the cluster set to add it. If you do not have cluster-admin
privileges when you are creating the cluster, you must select a cluster set on which you have clusterset-admin
permissions. If you do not have the correct permissions on the specified cluster set, the cluster creation fails. Contact your cluster administrator to provide you with clusterset-admin
permissions to a cluster set if you do not have any cluster set options to select.
Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet
, it is automatically added to the default
managed cluster set.
If there is already a base DNS domain that is associated with the selected credential that you configured for your provider account, that value is populated in that field. You can change the value by overwriting it, but this setting cannot be changed after the cluster is created. The base domain of your provider is used to create routes to your Red Hat OpenShift Container Platform cluster components. It is configured in the DNS of your cluster provider as a Start of Authority (SOA) record.
The OpenShift version identifies the version of the OpenShift Container Platform image that is used to create the cluster. If the version that you want to use is available, you can select the image from the list of images. If the image that you want to use is not a standard image, you can enter the URL to the image that you want to use. See Release images to learn more.
When you select a supported OpenShift Container Platform version, an option to select Install single-node OpenShift is displayed. A single-node OpenShift cluster contains a single node which hosts the control plane services and the user workloads. See Scaling hosts to an infrastructure environment to learn more about adding nodes to a single-node OpenShift cluster after it is created.
If you want your cluster to be a single-node OpenShift cluster, select the single-node OpenShift option. You can add additional workers to single-node OpenShift clusters by completing the following steps:
- From the console, navigate to Infrastructure > Clusters and select the name of the cluster that you created or want to access.
- Select Actions > Add hosts to add additional workers.
Note: The single-node OpenShift control plane requires 8 CPU cores, while a control plane node for a multinode control plane cluster only requires 4 CPU cores.
After you review and save the cluster, your cluster is saved as a draft cluster. You can close the creation process and finish the process later by selecting the cluster name on the Clusters page.
If you are using existing hosts, select whether you want to select the hosts yourself, or if you want them to be selected automatically. The number of hosts is based on the number of nodes that you selected. For example, a single-node OpenShift cluster only requires one host, while a standard three-node cluster requires three hosts.
The locations of the available hosts that meet the requirements for this cluster are displayed in the list of Host locations. For distribution of the hosts and a more high-availability configuration, select multiple locations.
If you are discovering new hosts with no existing infrastructure environment, complete the steps in Adding hosts to the host inventory by using the Discovery Image.
After the hosts are bound, and the validations pass, complete the networking information for your cluster by adding the following IP addresses:
API VIP: Specifies the IP address to use for internal API communication.
Note: This value must match the name that you used to create the DNS records listed in the prerequisites section. If not provided, the DNS must be pre-configured so that
api.
resolves correctly.Ingress VIP: Specifies the IP address to use for ingress traffic.
Note: This value must match the name that you used to create the DNS records listed in the prerequisites section. If not provided, the DNS must be pre-configured so that
test.apps.
resolves correctly.
If you are using Red Hat Advanced Cluster Management for Kubernetes and want to configure your managed cluster klusterlet to run on specific nodes, see Optional: Configuring the klusterlet to run on specific nodes for the required steps.
You can view the status of the installation on the Clusters navigation page.
Continue with Accessing your cluster for instructions for accessing your cluster.
1.7.3.9.3. Creating your cluster with the command line
You can also create a cluster without the console by using the Assisted Installer feature within the central infrastructure management component. After you complete this procedure, you can boot the host from the discovery image that is generated. The order of the procedures is generally not important, but is noted when there is a required order.
1.7.3.9.3.1. Create the namespace
You need a namespace for your resources. It is more convenient to keep all of the resources in a shared namespace. This example uses sample-namespace
for the name of the namespace, but you can use any name except assisted-installer
. Create a namespace by creating and applying the following file:
apiVersion: v1 kind: Namespace metadata: name: sample-namespace
1.7.3.9.3.2. Add the pull secret to the namespace
Add your pull secret to your namespace by creating and applying the following custom resource:
apiVersion: v1
kind: Secret
type: kubernetes.io/dockerconfigjson
metadata:
name: <pull-secret>
namespace: sample-namespace
stringData:
.dockerconfigjson: 'your-pull-secret-json' 1
1.7.3.9.3.3. Generate a ClusterImageSet
Generate a CustomImageSet
to specify the version of OpenShift Container Platform for your cluster by creating and applying the following custom resource:
apiVersion: hive.openshift.io/v1 kind: ClusterImageSet metadata: name: openshift-v4.15.0 spec: releaseImage: quay.io/openshift-release-dev/ocp-release:4.15.0-rc.0-x86_64
1.7.3.9.3.4. Create the ClusterDeployment custom resource
The ClusterDeployment
custom resource definition is an API that controls the lifecycle of the cluster. It references the AgentClusterInstall
custom resource in the spec.ClusterInstallRef
setting which defines the cluster parameters.
Create and apply a ClusterDeployment
custom resource based on the following example:
apiVersion: hive.openshift.io/v1 kind: ClusterDeployment metadata: name: single-node namespace: demo-worker4 spec: baseDomain: hive.example.com clusterInstallRef: group: extensions.hive.openshift.io kind: AgentClusterInstall name: test-agent-cluster-install 1 version: v1beta1 clusterName: test-cluster controlPlaneConfig: servingCertificates: {} platform: agentBareMetal: agentSelector: matchLabels: location: internal pullSecretRef: name: <pull-secret> 2
- 1
- Use the name of your
AgentClusterInstall
resource. - 2
- Use the pull secret that you downloaded in Add the pull secret to the namespace.
1.7.3.9.3.5. Create the AgentClusterInstall custom resource
In the AgentClusterInstall
custom resource, you can specify many of the requirements for the clusters. For example, you can specify the cluster network settings, platform, number of control planes, and worker nodes.
Create and add the a custom resource that resembles the following example:
apiVersion: extensions.hive.openshift.io/v1beta1 kind: AgentClusterInstall metadata: name: test-agent-cluster-install namespace: demo-worker4 spec: platformType: BareMetal 1 clusterDeploymentRef: name: single-node 2 imageSetRef: name: openshift-v4.15.0 3 networking: clusterNetwork: - cidr: 10.128.0.0/14 hostPrefix: 23 machineNetwork: - cidr: 192.168.111.0/24 serviceNetwork: - 172.30.0.0/16 provisionRequirements: controlPlaneAgents: 1 sshPublicKey: ssh-rsa <your-public-key-here> 4
- 1
- Specify the platform type of the environment where the cluster is created. Valid values are:
BareMetal
,None
,VSphere
,Nutanix
, orExternal
. - 2
- Use the same name that you used for your
ClusterDeployment
resource. - 3
- Use the
ClusterImageSet
that you generated in Generate a ClusterImageSet. - 4
- You can specify your SSH public key, which enables you to access the host after it is installed.
1.7.3.9.3.6. Optional: Create the NMStateConfig custom resource
The NMStateConfig
custom resource is only required if you have a host-level network configuration, such as static IP addresses. If you include this custom resource, you must complete this step before creating an InfraEnv
custom resource. The NMStateConfig
is referred to by the values for spec.nmStateConfigLabelSelector
in the InfraEnv
custom resource.
Create and apply your NMStateConfig
custom resource, which resembles the following example. Replace values where needed:
apiVersion: agent-install.openshift.io/v1beta1 kind: NMStateConfig metadata: name: <mynmstateconfig> namespace: <demo-worker4> labels: demo-nmstate-label: <value> spec: config: interfaces: - name: eth0 type: ethernet state: up mac-address: 02:00:00:80:12:14 ipv4: enabled: true address: - ip: 192.168.111.30 prefix-length: 24 dhcp: false - name: eth1 type: ethernet state: up mac-address: 02:00:00:80:12:15 ipv4: enabled: true address: - ip: 192.168.140.30 prefix-length: 24 dhcp: false dns-resolver: config: server: - 192.168.126.1 routes: config: - destination: 0.0.0.0/0 next-hop-address: 192.168.111.1 next-hop-interface: eth1 table-id: 254 - destination: 0.0.0.0/0 next-hop-address: 192.168.140.1 next-hop-interface: eth1 table-id: 254 interfaces: - name: "eth0" macAddress: "02:00:00:80:12:14" - name: "eth1" macAddress: "02:00:00:80:12:15"
Note: You must include the demo-nmstate-label
label name and value in the InfraEnv
resource spec.nmStateConfigLabelSelector.matchLabels
field.
1.7.3.9.3.7. Create the InfraEnv custom resource
The InfraEnv
custom resource provides the configuration to create the discovery ISO. Within this custom resource, you identify values for proxy settings, ignition overrides, and specify NMState
labels. The value of spec.nmStateConfigLabelSelector
in this custom resource references the NMStateConfig
custom resource.
Note: If you plan to include the optional NMStateConfig
custom resource, you must reference it in the InfraEnv
custom resource. If you create the InfraEnv
custom resource before you create the NMStateConfig
custom resource edit the InfraEnv
custom resource to reference the NMStateConfig
custom resource and download the ISO after the reference is added.
Create and apply the following custom resource:
apiVersion: agent-install.openshift.io/v1beta1 kind: InfraEnv metadata: name: myinfraenv namespace: demo-worker4 spec: clusterRef: name: single-node 1 namespace: demo-worker4 2 pullSecretRef: name: pull-secret sshAuthorizedKey: <your_public_key_here> nmStateConfigLabelSelector: matchLabels: demo-nmstate-label: value proxy: httpProxy: http://USERNAME:PASSWORD@proxy.example.com:PORT httpsProxy: https://USERNAME:PASSWORD@proxy.example.com:PORT noProxy: .example.com,172.22.0.0/24,10.10.0.0/24
- 1
- Replace the
clusterDeployment
resource name from Create the ClusterDeployment. - 2
- Replace the
clusterDeployment
resource namespace from Create the ClusterDeployment.
1.7.3.9.3.7.1. InfraEnv field table
Field | Optional or required | Description |
---|---|---|
| Optional | You can specify your SSH public key, which enables you to access the host when it is booted from the discovery ISO image. |
| Optional |
Consolidates advanced network configuration such as static IPs, bridges, and bonds for the hosts. The host network configuration is specified in one or more |
| Optional | You can specify proxy settings required by the host during discovery in the proxy section. |
Note: When provisioning with IPv6, you cannot define a CIDR address block in the noProxy
settings. You must define each address separately.
1.7.3.9.3.8. Boot the host from the discovery image
The remaining steps explain how to boot the host from the discovery ISO image that results from the previous procedures.
Download the discovery image from the namespace by running the following command:
curl --insecure -o image.iso $(kubectl -n sample-namespace get infraenvs.agent-install.openshift.io myinfraenv -o=jsonpath="{.status.isoDownloadURL}")
- Move the discovery image to virtual media, a USB drive, or another storage location and boot the host from the discovery image that you downloaded.
The
Agent
resource is created automatically. It is registered to the cluster and represents a host that booted from a discovery image. Approve theAgent
custom resource and start the installation by running the following command:oc -n sample-namespace patch agents.agent-install.openshift.io 07e80ea9-200c-4f82-aff4-4932acb773d4 -p '{"spec":{"approved":true}}' --type merge
Replace the agent name and UUID with your values.
You can confirm that it was approved when the output of the previous command includes an entry for the target cluster that includes a value of
true
for theAPPROVED
parameter.
1.7.3.9.4. Additional resources
- For additional steps that are required when creating a cluster on the Nutanix platform with the CLI, see Adding hosts on Nutanix with the API and Nutanix post-installation configuration in the Red Hat OpenShift Container Platform documentation.
- For additional information about zero touch provisioning, see Clusters at the network far edge in the OpenShift Container Platform documentation.
- See Using image pull secrets
- See Creating a credential for an on-premises environment
- See Release images
- See Adding hosts to the host inventory by using the Discovery Image
1.7.3.10. Creating a cluster in a proxy environment
You can create a Red Hat OpenShift Container Platform cluster when your hub cluster is connected through a proxy server. One of the following situations must be true for the cluster creation to succeed:
- multicluster engine operator has a private network connection with the managed cluster that you are creating, with managed cluster access to the Internet by using a proxy.
- The managed cluster is on an infrastructure provider, but the firewall ports enable communication from the managed cluster to the hub cluster.
To create a cluster that is configured with a proxy, complete the following steps:
Configure the
cluster-wide-proxy
setting on the hub cluster by adding the following information to yourinstall-config
YAML that is stored in your Secret:apiVersion: v1 kind: Proxy baseDomain: <domain> proxy: httpProxy: http://<username>:<password>@<proxy.example.com>:<port> httpsProxy: https://<username>:<password>@<proxy.example.com>:<port> noProxy: <wildcard-of-domain>,<provisioning-network/CIDR>,<BMC-address-range/CIDR>
Replace
username
with the username for your proxy server.Replace
password
with the password to access your proxy server.Replace
proxy.example.com
with the path of your proxy server.Replace
port
with the communication port with the proxy server.Replace
wildcard-of-domain
with an entry for domains that should bypass the proxy.Replace
provisioning-network/CIDR
with the IP address of the provisioning network and the number of assigned IP addresses, in CIDR notation.Replace
BMC-address-range/CIDR
with the BMC address and the number of addresses, in CIDR notation.- Provision the cluster by completing the procedure for creating a cluster. See Creating a cluster to select your provider.
Note: You can only use install-config
YAML when deploying your cluster. After deploying your cluster, any new changes you make to install-config
YAML do not apply. To update the configuration after deployment, you must use policies. See Pod policy for more information.
1.7.3.10.1. Additional resources
- See Creating clusters to select your provider.
- See Pod policy to learn how to make configuration changes after deploying your cluster.
1.7.3.11. Configuring AgentClusterInstall proxy
The AgentClusterInstall proxy fields determine the proxy settings during installation, and are used to create the cluster-wide proxy resource in the created cluster.
1.7.3.11.1. Configuring AgentClusterInstall
To configure the AgentClusterInstall
proxy, add the proxy
settings to the AgentClusterInstall
resource. See the following YAML sample with httpProxy
, httpsProxy
, and noProxy
:
apiVersion: extensions.hive.openshift.io/v1beta1 kind: AgentClusterInstall spec: proxy: httpProxy: http://<username>:<password>@<proxy.example.com>:<port> 1 httpsProxy: https://<username>:<password>@<proxy.example.com>:<port> 2 noProxy: <wildcard-of-domain>,<provisioning-network/CIDR>,<BMC-address-range/CIDR> 3
- 1
httpProxy
is the URL of the proxy for HTTP requests. Replace the username and password values with your credentials for your proxy server. Replaceproxy.example.com
with the path of your proxy server.- 2
httpsProxy
is the URL of the proxy for HTTPS requests. Replace the values with your credentials. Replaceport
with the communication port with the proxy server.- 3
noProxy
is a comma-separated list of domains and CIDRs for which the proxy should not be used. Replacewildcard-of-domain
with an entry for domains that should bypass the proxy. Replaceprovisioning-network/CIDR
with the IP address of the provisioning network and the number of assigned IP addresses, in CIDR notation. ReplaceBMC-address-range/CIDR
with the BMC address and the number of addresses, in CIDR notation.
1.7.3.11.2. Additional resources
1.7.4. Cluster import
You can import clusters from different Kubernetes cloud providers. After you import, the target cluster becomes a managed cluster for the multicluster engine operator hub cluster. You can generally complete the import tasks anywhere that you can access the hub cluster and the target managed cluster, unless otherwise specified.
- A hub cluster cannot manage any other hub cluster, but can manage itself. The hub cluster is configured to automatically be imported and self-managed. You do not need to manually import the hub cluster.
-
If you remove a hub cluster and try to import it again, you must add the
local-cluster:true
label to theManagedCluster
resource.
Important: Cluster lifecycle now supports all providers that are certified through the Cloud Native Computing Foundation (CNCF) Kubernetes Conformance Program. Choose a vendor that is recognized by CNFC for your hybrid cloud multicluster management.
See the following information about using CNFC providers:
- Learn how CNFC providers are certified at Certified Kubernetes Conformance.
- For Red Hat support information about CNFC third-party providers, see Red Hat support with third party components, or Contact Red Hat support.
-
If you bring your own CNFC conformance certified cluster, you need to change the OpenShift Container Platform CLI
oc
command to the Kubernetes CLI command,kubectl
.
Read the following topics to learn more about importing a cluster so that you can manage it:
Required user type or access level: Cluster administrator
1.7.4.1. Importing a managed cluster by using the console
After you install multicluster engine for Kubernetes operator, you are ready to import a cluster to manage. Continue reading the following topics learn how to import a managed cluster by using the console:
1.7.4.1.1. Prerequisites
- A deployed hub cluster. If you are importing bare metal clusters, the hub cluster must be installed on a supported Red Hat OpenShift Container Platform version.
- A cluster you want to manage.
-
The
base64
command line tool. -
A defined
multiclusterhub.spec.imagePullSecret
if you are importing a cluster that was not created by OpenShift Container Platform. This secret might have been created when multicluster engine for Kubernetes operator was installed. See Custom image pull secret for more information about how to define this secret.
Required user type or access level: Cluster administrator
1.7.4.1.2. Creating a new pull secret
If you need to create a new pull secret, complete the following steps:
- Download your Kubernetes pull secret from cloud.redhat.com.
- Add the pull secret to the namespace of your hub cluster.
Run the following command to create a new secret in the
open-cluster-management
namespace:oc create secret generic pull-secret -n <open-cluster-management> --from-file=.dockerconfigjson=<path-to-pull-secret> --type=kubernetes.io/dockerconfigjson
Replace
open-cluster-management
with the name of the namespace of your hub cluster. The default namespace of the hub cluster isopen-cluster-management
.Replace
path-to-pull-secret
with the path to the pull secret that you downloaded.The secret is automatically copied to the managed cluster when it is imported.
-
Ensure that a previously installed agent is deleted from the cluster that you want to import. You must remove the
open-cluster-management-agent
andopen-cluster-management-agent-addon
namespaces to avoid errors. For importing in a Red Hat OpenShift Dedicated environment, see the following notes:
- You must have the hub cluster deployed in a Red Hat OpenShift Dedicated environment.
-
The default permission in Red Hat OpenShift Dedicated is dedicated-admin, but that does not contain all of the permissions to create a namespace. You must have
cluster-admin
permissions to import and manage a cluster with multicluster engine operator.
-
Ensure that a previously installed agent is deleted from the cluster that you want to import. You must remove the
1.7.4.1.3. Importing a cluster
You can import existing clusters from the console for each of the available cloud providers.
Note: A hub cluster cannot manage a different hub cluster. A hub cluster is set up to automatically import and manage itself, so you do not have to manually import a hub cluster to manage itself.
By default, the namespace is used for the cluster name and namespace, but you can change it.
Important: When you create a cluster, the controller creates a namespace for the cluster and its resources. Ensure that you include only resources for that cluster instance in that namespace. Destroying the cluster deletes the namespace and all of the resources in it.
Every managed cluster must be associated with a managed cluster set. If you do not assign the managed cluster to a ManagedClusterSet
, the cluster is automatically added to the default
managed cluster set.
If you want to add the cluster to a different cluster set, you must have clusterset-admin
privileges to the cluster set. If you do not have cluster-admin
privileges when you are importing the cluster, you must select a cluster set on which you have clusterset-admin
permissions. If you do not have the correct permissions on the specified cluster set, the cluster importing fails. Contact your cluster administrator to provide you with clusterset-admin
permissions to a cluster set if you do not have cluster set options to select.
If you import a OpenShift Container Platform Dedicated cluster and do not specify a vendor by adding a label for vendor=OpenShiftDedicated
, or if you add a label for vendor=auto-detect
, a managed-by=platform
label is automatically added to the cluster. You can use this added label to identify the cluster as a OpenShift Container Platform Dedicated cluster and retrieve the OpenShift Container Platform Dedicated clusters as a group.
The following table provides the available options for import mode, which specifies the method for importing the cluster:
Run import commands manually | After completing and submitting the information in the console, including any Red Hat Ansible Automation Platform templates, run the provided command on the target cluster to import the cluster. |
Enter your server URL and API token for the existing cluster | Provide the server URL and API token of the cluster that you are importing. You can specify a Red Hat Ansible Automation Platform template to run when the cluster is upgraded. |
Provide the |
Copy and paste the contents of the |
Note: You must have the Red Hat Ansible Automation Platform Resource Operator installed from OperatorHub to create and run an Ansible Automation Platform job.
To configure a cluster API address, see Optional: Configuring the cluster API address.
To configure your managed cluster klusterlet to run on specific nodes, see Optional: Configuring the klusterlet to run on specific nodes.
1.7.4.1.3.1. Optional: Configuring the cluster API address
Complete the following steps to optionally configure the Cluster API address that is on the cluster details page by configuring the URL that is displayed in the table when you run the oc get managedcluster
command:
-
Log in to your hub cluster with an ID that has
cluster-admin
permissions. -
Configure a
kubeconfig
file for your targeted managed cluster. Edit the managed cluster entry for the cluster that you are importing by running the following command, replacing
cluster-name
with the name of the managed cluster:oc edit managedcluster <cluster-name>
Add the
ManagedClusterClientConfigs
section to theManagedCluster
spec in the YAML file, as shown in the following example:spec: hubAcceptsClient: true managedClusterClientConfigs: - url: <https://api.new-managed.dev.redhat.com> 1
- 1
- Replace the value of the URL with the URL that provides external access to the managed cluster that you are importing.
1.7.4.1.3.2. Optional: Configuring the klusterlet to run on specific nodes
You can specify which nodes you want the managed cluster klusterlet to run on by configuring the nodeSelector
and tolerations
annotation for the managed cluster. Complete the following steps to configure these settings:
- Select the managed cluster that you want to update from the clusters page in the console.
Set the YAML switch to
On
to view the YAML content.Note: The YAML editor is only available when importing or creating a cluster. To edit the managed cluster YAML definition after importing or creating, you must use the OpenShift Container Platform command-line interface or the Red Hat Advanced Cluster Management search feature.
-
Add the
nodeSelector
annotation to the managed cluster YAML definition. The key for this annotation is:open-cluster-management/nodeSelector
. The value of this annotation is a string map with JSON formatting. Add the
tolerations
entry to the managed cluster YAML definition. The key of this annotation is:open-cluster-management/tolerations
. The value of this annotation represents a toleration list with JSON formatting. The resulting YAML might resemble the following example:apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: annotations: open-cluster-management/nodeSelector: '{"dedicated":"acm"}' open-cluster-management/tolerations: '[{"key":"dedicated","operator":"Equal","value":"acm","effect":"NoSchedule"}]'
You can also use a KlusterletConfig
to configure the nodeSelector
and tolerations
for the managed cluster. Complete the following steps to configure these settings:
Note: If you use a KlusterletConfig
, the managed cluster uses the configuration in the KlusterletConfig
settings instead of the settings in the managed cluster annotation.
Apply the following sample YAML content. Replace value where needed:
apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: <klusterletconfigName> spec: nodePlacement: nodeSelector: dedicated: acm tolerations: - key: dedicated operator: Equal value: acm effect: NoSchedule
-
Add the
agent.open-cluster-management.io/klusterlet-config: `<klusterletconfigName>
annotation to the managed cluster, replacing<klusterletconfigName>
with the name of yourKlusterletConfig
.
1.7.4.1.4. Removing an imported cluster
Complete the following procedure to remove an imported cluster and the open-cluster-management-agent-addon
that was created on the managed cluster.
On the Clusters page, click Actions > Detach cluster to remove your cluster from management.
Note: If you attempt to detach the hub cluster, which is named local-cluster
, be aware that the default setting of disableHubSelfManagement
is false
. This setting causes the hub cluster to reimport itself and manage itself when it is detached and it reconciles the MultiClusterHub
controller. It might take hours for the hub cluster to complete the detachment process and reimport. If you want to reimport the hub cluster without waiting for the processes to finish, you can run the following command to restart the multiclusterhub-operator
pod and reimport faster:
oc delete po -n open-cluster-management `oc get pod -n open-cluster-management | grep multiclusterhub-operator| cut -d' ' -f1`
You can change the value of the hub cluster to not import automatically by changing the disableHubSelfManagement
value to true
. For more information, see the disableHubSelfManagement topic.
1.7.4.1.4.1. Additional resources
- See Custom image pull secret for more information about how to define a custom image pull secret.
- See the disableHubSelfManagement topic.
1.7.4.2. Importing a managed cluster by using the CLI
After you install multicluster engine for Kubernetes operator, you are ready to import a cluster and manage it by using the Red Hat OpenShift Container Platform CLI. Continue reading the following topics to learn how to import a managed cluster with the CLI by using the auto import secret, or by using manual commands.
Important: A hub cluster cannot manage a different hub cluster. A hub cluster is set up to automatically import and manage itself as a local cluster. You do not have to manually import a hub cluster to manage itself. If you remove a hub cluster and try to import it again, you need to add the local-cluster:true
label.
1.7.4.2.1. Prerequisites
- A deployed hub cluster. If you are importing bare metal clusters, the hub cluster must be installed on a supported OpenShift Container Platform version.
- A separate cluster you want to manage.
- The OpenShift Container Platform CLI. See Getting started with the OpenShift CLI for information about installing and configuring the OpenShift Container Platform CLI.
-
A defined
multiclusterhub.spec.imagePullSecret
if you are importing a cluster that was not created by OpenShift Container Platform. This secret might have been created when multicluster engine for Kubernetes operator was installed. See Custom image pull secret for more information about how to define this secret.
1.7.4.2.2. Supported architectures
- Linux (x86_64, s390x, ppc64le)
- macOS
1.7.4.2.3. Preparing for cluster import
Before importing a managed cluster by using the CLI, you must complete the following steps:
Log in to your hub cluster by running the following command:
oc login
Run the following command on the hub cluster to create the project and namespace. The cluster name that is defined in
<cluster_name>
is also used as the cluster namespace in the YAML file and commands:oc new-project <cluster_name>
Important: The
cluster.open-cluster-management.io/managedCluster
label is automatically added to and removed from a managed cluster namespace. Do not manually add it to or remove it from a managed cluster namespace.Create a file named
managed-cluster.yaml
with the following example content:apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: name: <cluster_name> labels: cloud: auto-detect vendor: auto-detect spec: hubAcceptsClient: true
When the values for
cloud
andvendor
are set toauto-detect
, Red Hat Advanced Cluster Management detects the cloud and vendor types automatically from the cluster that you are importing. You can optionally replace the values forauto-detect
with with the cloud and vendor values for your cluster. See the following example:cloud: Amazon vendor: OpenShift
Apply the YAML file to the
ManagedCluster
resource by running the following command:oc apply -f managed-cluster.yaml
You can now continue with either Importing the cluster by using the auto import secret or Importing the cluster manually.
1.7.4.2.4. Importing a cluster by using the auto import secret
To import a managed cluster by using the auto import secret, you must create a secret that contains either a reference to the kubeconfig
file of the cluster, or the kube API server and token pair of the cluster. Complete the following steps to import a cluster by using the auto import secret:
-
Retrieve the
kubeconfig
file, or the kube API server and token, of the managed cluster that you want to import. See the documentation for your Kubernetes cluster to learn where to locate yourkubeconfig
file or your kube API server and token. Create the
auto-import-secret.yaml
file in the ${CLUSTER_NAME} namespace.Create a YAML file named
auto-import-secret.yaml
by using content that is similar to the following template:apiVersion: v1 kind: Secret metadata: name: auto-import-secret namespace: <cluster_name> stringData: autoImportRetry: "5" # If you are using the kubeconfig file, add the following value for the kubeconfig file # that has the current context set to the cluster to import: kubeconfig: |- <kubeconfig_file> # If you are using the token/server pair, add the following two values instead of # the kubeconfig file: token: <Token to access the cluster> server: <cluster_api_url> type: Opaque
Apply the YAML file in the <cluster_name> namespace by running the following command:
oc apply -f auto-import-secret.yaml
Note: By default, the auto import secret is used one time and deleted when the import process completes. If you want to keep the auto import secret, add
managedcluster-import-controller.open-cluster-management.io/keeping-auto-import-secret
to the secret. You can add it by running the following command:oc -n <cluster_name> annotate secrets auto-import-secret managedcluster-import-controller.open-cluster-management.io/keeping-auto-import-secret=""
Validate the
JOINED
andAVAILABLE
status for your imported cluster. Run the following command from the hub cluster:oc get managedcluster <cluster_name>
Log in to the managed cluster by running the following command on the cluster:
oc login
You can validate the pod status on the cluster that you are importing by running the following command:
oc get pod -n open-cluster-management-agent
You can now continue with Importing the klusterlet add-on.
1.7.4.2.5. Importing a cluster manually
Important: The import command contains pull secret information that is copied to each of the imported managed clusters. Anyone who can access the imported clusters can also view the pull secret information.
Complete the following steps to import a managed cluster manually:
Obtain the
klusterlet-crd.yaml
file that was generated by the import controller on your hub cluster by running the following command:oc get secret <cluster_name>-import -n <cluster_name> -o jsonpath={.data.crds\\.yaml} | base64 --decode > klusterlet-crd.yaml
Obtain the
import.yaml
file that was generated by the import controller on your hub cluster by running the following command:oc get secret <cluster_name>-import -n <cluster_name> -o jsonpath={.data.import\\.yaml} | base64 --decode > import.yaml
Proceed with the following steps in the cluster that you are importing:
Log in to the managed cluster that you are importing by entering the following command:
oc login
Apply the
klusterlet-crd.yaml
that you generated in step 1 by running the following command:oc apply -f klusterlet-crd.yaml
Apply the
import.yaml
file that you previously generated by running the following command:oc apply -f import.yaml
You can validate the
JOINED
andAVAILABLE
status for the managed cluster that you are importing by running the following command from the hub cluster:oc get managedcluster <cluster_name>
You can now continue with Importing the klusterlet add-on.
1.7.4.2.6. Importing the klusterlet add-on
Implement the KlusterletAddonConfig
klusterlet add-on configuration to enable other add-ons on your managed clusters. Create and apply the configuration file by completing the following steps:
Create a YAML file that is similar to the following example:
apiVersion: agent.open-cluster-management.io/v1 kind: KlusterletAddonConfig metadata: name: <cluster_name> namespace: <cluster_name> spec: applicationManager: enabled: true certPolicyController: enabled: true iamPolicyController: enabled: true policyController: enabled: true searchCollector: enabled: true
-
Save the file as
klusterlet-addon-config.yaml
. Apply the YAML by running the following command:
oc apply -f klusterlet-addon-config.yaml
Add-ons are installed after the managed cluster status you are importing is
AVAILABLE
.You can validate the pod status of add-ons on the cluster you are importing by running the following command:
oc get pod -n open-cluster-management-agent-addon
1.7.4.2.7. Removing an imported cluster by using the command line interface
To remove a managed cluster by using the command line interface, run the following command:
oc delete managedcluster <cluster_name>
Replace <cluster_name>
with the name of the cluster.
1.7.4.3. Importing a managed cluster by using agent registration
After you install multicluster engine for Kubernetes operator, you are ready to import a cluster and manage it by using the agent registration endpoint. Continue reading the following topics to learn how to import a managed cluster by using the agent registration endpoint.
1.7.4.3.1. Prerequisites
- A deployed hub cluster. If you are importing bare metal clusters, the hub cluster must be installed on a supported OpenShift Container Platform version.
- A cluster you want to manage.
-
The
base64
command line tool. A defined
multiclusterhub.spec.imagePullSecret
if you are importing a cluster that was not created by OpenShift Container Platform. This secret might have been created when multicluster engine for Kubernetes operator was installed. See Custom image pull secret for more information about how to define this secret.If you need to create a new secret, see Creating a new pull secret.
1.7.4.3.2. Supported architectures
- Linux (x86_64, s390x, ppc64le)
- macOS
1.7.4.3.3. Importing a cluster
To import a managed cluster by using the agent registration endpoint, complete the following steps:
Get the agent registration server URL by running the following command on the hub cluster:
export agent_registration_host=$(oc get route -n multicluster-engine agent-registration -o=jsonpath="{.spec.host}")
Note: If your hub cluster is using a cluster-wide-proxy, make sure that you are using the URL that managed cluster can access.
Get the cacert by running the following command:
oc get configmap -n kube-system kube-root-ca.crt -o=jsonpath="{.data['ca\.crt']}" > ca.crt_
Note: If you are not using the
kube-root-ca
issued endpoint, use the publicagent-registration
API endpoint CA instead of thekube-root-ca
CA.Get the token for the agent registration sever to authorize by applying the following YAML content:
apiVersion: v1 kind: ServiceAccount metadata: name: managed-cluster-import-agent-registration-sa namespace: multicluster-engine --- apiVersion: v1 kind: Secret type: kubernetes.io/service-account-token metadata: name: managed-cluster-import-agent-registration-sa-token namespace: multicluster-engine annotations: kubernetes.io/service-account.name: "managed-cluster-import-agent-registration-sa" --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRole metadata: name: managedcluster-import-controller-agent-registration-client rules: - nonResourceURLs: ["/agent-registration/*"] verbs: ["get"] --- kind: ClusterRoleBinding apiVersion: rbac.authorization.k8s.io/v1 metadata: name: managed-cluster-import-agent-registration roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: managedcluster-import-controller-agent-registration-client subjects: - kind: ServiceAccount name: managed-cluster-import-agent-registration-sa namespace: multicluster-engine
Run the following command to export the token:
export token=$(oc get secret -n multicluster-engine managed-cluster-import-agent-registration-sa-token -o=jsonpath='{.data.token}' | base64 -d)
Enable the automatic approval and patch the content to
cluster-manager
by running the following command:oc patch clustermanager cluster-manager --type=merge -p '{"spec":{"registrationConfiguration":{"featureGates":[ {"feature": "ManagedClusterAutoApproval", "mode": "Enable"}], "autoApproveUsers":["system:serviceaccount:multicluster-engine:agent-registration-bootstrap"]}}}'
Note: You can also disable automatic approval and manually approve certificate signing requests from managed clusters.
Switch to your managed cluster and get the cacert by running the following command:
curl --cacert ca.crt -H "Authorization: Bearer $token" https://$agent_registration_host/agent-registration/crds/v1 | oc apply -f -
Run the following command to import the managed cluster to the hub cluster. Replace
<clusterName>
with the name of you cluster. Replace<duration>
with a time value. For example,4h
:Optional: Replace
<klusterletconfigName>
with the name of your KlusterletConfig.curl --cacert ca.crt -H "Authorization: Bearer $token" https://$agent_registration_host/agent-registration/manifests/<clusterName>?klusterletconfig=<klusterletconfigName>&duration=<duration> | oc apply -f -
Note: The
kubeconfig
bootstrap in the klusterlet manifest does not expire if you do not set a duration.
1.7.4.4. Importing an on-premises Red Hat OpenShift Container Platform cluster manually by using central infrastructure management
After you install multicluster engine for Kubernetes operator, you are ready to import a managed cluster. You can import an existing OpenShift Container Platform cluster so that you can add additional nodes. Continue reading the following topics to learn more:
1.7.4.4.1. Prerequisites
- Enable the central infrastructure management feature.
1.7.4.4.2. Importing a cluster
Complete the following steps to import an OpenShift Container Platform cluster manually, without a static network or a bare metal host, and prepare it for adding nodes:
Create a namespace for the OpenShift Container Platform cluster that you want to import by applying the following YAML content:
apiVersion: v1 kind: Namespace metadata: name: managed-cluster
Make sure that a ClusterImageSet matching the OpenShift Container Platform cluster you are importing exists by applying the following YAML content:
apiVersion: hive.openshift.io/v1 kind: ClusterImageSet metadata: name: openshift-v4.15 spec: releaseImage: quay.io/openshift-release-dev/ocp-release@sha256:22e149142517dfccb47be828f012659b1ccf71d26620e6f62468c264a7ce7863
Add your pull secret to access the image by applying the following YAML content:
apiVersion: v1 kind: Secret type: kubernetes.io/dockerconfigjson metadata: name: pull-secret namespace: managed-cluster stringData: .dockerconfigjson: <pull-secret-json> 1
- 1
- Replace <pull-secret-json> with your pull secret JSON.
Copy the
kubeconfig
from your OpenShift Container Platform cluster to the hub cluster.Get the
kubeconfig
from your OpenShift Container Platform cluster by running the following command. Make sure thatkubeconfig
is set as the cluster being imported:oc get secret -n openshift-kube-apiserver node-kubeconfigs -ojson | jq '.data["lb-ext.kubeconfig"]' --raw-output | base64 -d > /tmp/kubeconfig.some-other-cluster
Note: If your cluster API is accessed through a custom domain, you must first edit this
kubeconfig
by adding your custom certificates in thecertificate-authority-data
field and by changing theserver
field to match your custom domain.Copy the
kubeconfig
to the hub cluster by running the following command. Make sure thatkubeconfig
is set as your hub cluster:oc -n managed-cluster create secret generic some-other-cluster-admin-kubeconfig --from-file=kubeconfig=/tmp/kubeconfig.some-other-cluster
Create an
AgentClusterInstall
custom resource by applying the following YAML content. Replace values where needed:apiVersion: extensions.hive.openshift.io/v1beta1 kind: AgentClusterInstall metadata: name: <your-cluster-name> 1 namespace: <managed-cluster> spec: networking: userManagedNetworking: true clusterDeploymentRef: name: <your-cluster> imageSetRef: name: openshift-v4.11.18 provisionRequirements: controlPlaneAgents: 2 sshPublicKey: <""> 3
Create a
ClusterDeployment
by applying the following YAML content. Replace values where needed:apiVersion: hive.openshift.io/v1 kind: ClusterDeployment metadata: name: <your-cluster-name> 1 namespace: managed-cluster spec: baseDomain: <redhat.com> 2 installed: <true> 3 clusterMetadata: adminKubeconfigSecretRef: name: <your-cluster-name-admin-kubeconfig> 4 clusterID: <""> 5 infraID: <""> 6 clusterInstallRef: group: extensions.hive.openshift.io kind: AgentClusterInstall name: your-cluster-name-install version: v1beta1 clusterName: your-cluster-name platform: agentBareMetal: pullSecretRef: name: pull-secret
- 1
- Choose a name for your cluster.
- 2
- Make sure
baseDomain
matches the domain you are using for your OpenShift Container Platform cluster. - 3
- Set to
true
to automatically import your OpenShift Container Platform cluster as a production environment cluster. - 4
- Reference the
kubeconfig
you created in step 4. - 5 6
- Leave
clusterID
andinfraID
empty in production environments.
Add an
InfraEnv
custom resource to discover new hosts to add to your cluster by applying the following YAML content. Replace values where needed:Note: The following example might require additional configuration if you are not using a static IP address.
apiVersion: agent-install.openshift.io/v1beta1 kind: InfraEnv metadata: name: your-infraenv namespace: managed-cluster spec: clusterRef: name: your-cluster-name namespace: managed-cluster pullSecretRef: name: pull-secret sshAuthorizedKey: ""
Field | Optional or required | Description |
---|---|---|
| Optional |
The |
| Optional |
Add the optional |
If the import is successful, a URL to download an ISO file appears. Download the ISO file by running the following command, replacing <url> with the URL that appears:
Note: You can automate host discovery by using bare metal host.
oc get infraenv -n managed-cluster some-other-infraenv -ojson | jq ".status.<url>" --raw-output | xargs curl -k -o /storage0/isos/some-other.iso
-
Optional: If you want to use Red Hat Advanced Cluster Management features, such as policies, on your OpenShift Container Platform cluster, create a
ManagedCluster
resource. Make sure that the name of yourManagedCluster
resource matches the name of yourClusterDeplpoyment
resource. If you are missing theManagedCluster
resource, your cluster status isdetached
in the console.
1.7.4.4.3. Importing cluster resources
If your OpenShift Container Platform managed cluster was installed by the Assisted Installer, you can move the managed cluster and its resources from one hub cluster to another hub cluster.
You can import the following resources and continue to manage your cluster with them:
-
Agent
-
AgentClassification
-
AgentClusterInstall
-
BareMetalHost
-
ClusterDeployment
-
InfraEnv
-
NMStateConfig
You can manage a cluster from a new hub cluster by creating a copy of the original resources and applying them to the new hub cluster. You can then scale down or scale up your managed cluster from the new hub cluster.
Important: You can only scale down imported OpenShift Container Platform managed clusters if they were installed by the Assisted Installer.
Import your cluster resources by creating a copy of your resources on your target hub cluster. See the following example to learn how to create a copy of the Agent
resource and apply similar steps to your other resources:
Get the
Agent
resource from your source hub cluster by running the following command. Replace values where needed:oc –kubeconfig <source_hub_kubeconfig> -n <managed_cluster_name> get agent <cluster_provisioning_namespace> -oyaml > agent.yaml
Apply your
Agent
resource on your target hub cluster by running the following command. Replace values where needed:oc –kubeconfig <target_hub_kubeconfig> apply -f agent.yaml
After importing your cluster resources, delete your original cluster resources on your source hub cluster.
1.7.4.5. Specifying image registry on managed clusters for import
You might need to override the image registry on the managed clusters that you are importing. You can do this by creating a ManagedClusterImageRegistry
custom resource definition.
The ManagedClusterImageRegistry
custom resource definition is a namespace-scoped resource.
The ManagedClusterImageRegistry
custom resource definition specifies a set of managed clusters for a Placement to select, but needs different images from the custom image registry. After the managed clusters are updated with the new images, the following label is added to each managed cluster for identification: open-cluster-management.io/image-registry=<namespace>.<managedClusterImageRegistryName>
.
The following example shows a ManagedClusterImageRegistry
custom resource definition:
apiVersion: imageregistry.open-cluster-management.io/v1alpha1 kind: ManagedClusterImageRegistry metadata: name: <imageRegistryName> namespace: <namespace> spec: placementRef: group: cluster.open-cluster-management.io resource: placements name: <placementName> 1 pullSecret: name: <pullSecretName> 2 registries: 3 - mirror: <mirrored-image-registry-address> source: <image-registry-address> - mirror: <mirrored-image-registry-address> source: <image-registry-address>
- 1
- Replace with the name of a Placement in the same namespace that selects a set of managed clusters.
- 2
- Replace with the name of the pull secret that is used to pull images from the custom image registry.
- 3
- List the values for each of the
source
andmirror
registries. Replace themirrored-image-registry-address
andimage-registry-address
with the value for each of themirror
andsource
values of the registries.-
Example 1: To replace the source image registry named
registry.redhat.io/rhacm2
withlocalhost:5000/rhacm2
, andregistry.redhat.io/multicluster-engine
withlocalhost:5000/multicluster-engine
, use the following example:
-
Example 1: To replace the source image registry named
registries: - mirror: localhost:5000/rhacm2/ source: registry.redhat.io/rhacm2 - mirror: localhost:5000/multicluster-engine source: registry.redhat.io/multicluster-engine
Example 2: To replace the source image,
registry.redhat.io/rhacm2/registration-rhel8-operator
withlocalhost:5000/rhacm2-registration-rhel8-operator
, use the following example:registries: - mirror: localhost:5000/rhacm2-registration-rhel8-operator source: registry.redhat.io/rhacm2/registration-rhel8-operator
Important: If you are importing a managed cluster by using agent registration, you must create a KlusterletConfig
that contains image registries. See the following example. Replace values where needed:
apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: <klusterletconfigName> spec: pullSecret: namespace: <pullSecretNamespace> name: <pullSecretName> registries: - mirror: <mirrored-image-registry-address> source: <image-registry-address> - mirror: <mirrored-image-registry-address> source: <image-registry-address>
See Importing a managed cluster by using the agent registration endpoint to learn more.
1.7.4.5.1. Importing a cluster that has a ManagedClusterImageRegistry
Complete the following steps to import a cluster that is customized with a ManagedClusterImageRegistry custom resource definition:
Create a pull secret in the namespace where you want your cluster to be imported. For these steps, the namespace is
myNamespace
.$ kubectl create secret docker-registry myPullSecret \ --docker-server=<your-registry-server> \ --docker-username=<my-name> \ --docker-password=<my-password>
Create a Placement in the namespace that you created.
apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: myPlacement namespace: myNamespace spec: clusterSets: - myClusterSet tolerations: - key: "cluster.open-cluster-management.io/unreachable" operator: Exists
Note: The
unreachable
toleration is required for the Placement to be able to select the cluster.Create a
ManagedClusterSet
resource and bind it to your namespace.apiVersion: cluster.open-cluster-management.io/v1beta2 kind: ManagedClusterSet metadata: name: myClusterSet --- apiVersion: cluster.open-cluster-management.io/v1beta2 kind: ManagedClusterSetBinding metadata: name: myClusterSet namespace: myNamespace spec: clusterSet: myClusterSet
Create the
ManagedClusterImageRegistry
custom resource definition in your namespace.apiVersion: imageregistry.open-cluster-management.io/v1alpha1 kind: ManagedClusterImageRegistry metadata: name: myImageRegistry namespace: myNamespace spec: placementRef: group: cluster.open-cluster-management.io resource: placements name: myPlacement pullSecret: name: myPullSecret registry: myRegistryAddress
- Import a managed cluster from the console and add it to a managed cluster set.
-
Copy and run the import commands on the managed cluster after the
open-cluster-management.io/image-registry=myNamespace.myImageRegistry
label is added to the managed cluster.
1.7.5. Accessing your cluster
To access an Red Hat OpenShift Container Platform cluster that was created and is managed, complete the following steps:
- From the console, navigate to Infrastructure > Clusters and select the name of the cluster that you created or want to access.
Select Reveal credentials to view the user name and password for the cluster. Note these values to use when you log in to the cluster.
Note: The Reveal credentials option is not available for imported clusters.
- Select Console URL to link to the cluster.
- Log in to the cluster by using the user ID and password that you found in step three.
1.7.6. Scaling managed clusters
For clusters that you created, you can customize and resize your managed cluster specifications, such as virtual machine sizes and number of nodes. See the following option if you are using installer-provisioned infrastructure for cluster deployment:
See the following options if you are using central infrastructure management for cluster deployment:
1.7.6.1. Scaling with MachinePool
For clusters that you provision with multicluster engine operator, a MachinePool
resource is automatically created for you. You can further customize and resize your managed cluster specifications, such as virtual machine sizes and number of nodes, by using MachinePool
.
-
Using the
MachinePool
resource is not supported for bare metal clusters. -
A
MachinePool
resource is a Kubernetes resource on the hub cluster that groups theMachineSet
resources together on the managed cluster. -
The
MachinePool
resource uniformly configures a set of machine resources, including zone configurations, instance type, and root storage. -
With
MachinePool
, you can manually configure the desired number of nodes or configure autoscaling of nodes on the managed cluster.
1.7.6.1.1. Configure autoscaling
Configuring autoscaling provides the flexibility of your cluster to scale as needed to lower your cost of resources by scaling down when traffic is low, and by scaling up to ensure that there are enough resources when there is a higher demand for resources.
To enable autoscaling on your
MachinePool
resources using the console, complete the following steps:- In the navigation, select Infrastructure > Clusters.
- Click the name of your target cluster and select the Machine pools tab.
- From the machine pools page, select Enable autoscale from the Options menu for the target machine pool.
Select the minimum and maximum number of machine set replicas. A machine set replica maps directly to a node on the cluster.
The changes might take several minutes to reflect on the console after you click Scale. You can view the status of the scaling operation by clicking View machines in the notification of the Machine pools tab.
To enable autoscaling on your
MachinePool
resources using the command line, complete the following steps:Enter the following command to view your list of machine pools, replacing
managed-cluster-namespace
with the namespace of your target managed cluster.oc get machinepools -n <managed-cluster-namespace>
Enter the following command to edit the YAML file for the machine pool:
oc edit machinepool <MachinePool-resource-name> -n <managed-cluster-namespace>
-
Replace
MachinePool-resource-name
with the name of yourMachinePool
resource. -
Replace
managed-cluster-namespace
with the name of the namespace of your managed cluster.
-
Replace
-
Delete the
spec.replicas
field from the YAML file. -
Add the
spec.autoscaling.minReplicas
setting andspec.autoscaling.maxReplicas
fields to the resource YAML. -
Add the minimum number of replicas to the
minReplicas
setting. -
Add the maximum number of replicas into the
maxReplicas
setting. - Save the file to submit the changes.
1.7.6.1.2. Disabling autoscaling
You can disable autoscaling by using the console or the command line.
To disable autoscaling by using the console, complete the following steps:
- In the navigation, select Infrastructure > Clusters.
- Click the name of your target cluster and select the Machine pools tab.
- From the machine pools page, select Disable autoscale from the Options menu for the target machine pool.
Select the number of machine set replicas that you want. A machine set replica maps directly with a node on the cluster.
It might take several minutes to display in the console after you click Scale. You can view the status of the scaling by clicking View machines in the notification on the Machine pools tab.
To disable autoscaling by using the command line, complete the following steps:
Enter the following command to view your list of machine pools:
oc get machinepools -n <managed-cluster-namespace>
Replace
managed-cluster-namespace
with the namespace of your target managed cluster.Enter the following command to edit the YAML file for the machine pool:
oc edit machinepool <name-of-MachinePool-resource> -n <namespace-of-managed-cluster>
Replace
name-of-MachinePool-resource
with the name of yourMachinePool
resource.Replace
namespace-of-managed-cluster
with the name of the namespace of your managed cluster.-
Delete the
spec.autoscaling
field from the YAML file. -
Add the
spec.replicas
field to the resource YAML. -
Add the number of replicas to the
replicas
setting. - Save the file to submit the changes.
1.7.6.1.3. Enabling manual scaling
You can scale manually from the console and from the command line.
1.7.6.1.3.1. Enabling manual scaling with the console
To scale your MachinePool
resources using the console, complete the following steps:
-
Disable autoscaling for your
MachinePool
if it is enabled. See the previous steps. - From the console, click Infrastructure > Clusters.
- Click the name of your target cluster and select the Machine pools tab.
- From the machine pools page, select Scale machine pool from the Options menu for the targeted machine pool.
- Select the number of machine set replicas that you want. A machine set replica maps directly with a node on the cluster. Changes might take several minutes to reflect on the console after you click Scale. You can view the status of the scaling operation by clicking View machines from the notification of the Machine pools tab.
1.7.6.1.3.2. Enabling manual scaling with the command line
To scale your MachinePool
resources by using the command line, complete the following steps:
Enter the following command to view your list of machine pools, replacing
<managed-cluster-namespace>
with the namespace of your target managed cluster namespace:oc get machinepools -n <managed-cluster-namespace>
Enter the following command to edit the YAML file for the machine pool:
oc edit machinepool <MachinePool-resource-name> -n <managed-cluster-namespace>
-
Replace
MachinePool-resource-name
with the name of yourMachinePool
resource. -
Replace
managed-cluster-namespace
with the name of the namespace of your managed cluster.
-
Replace
-
Delete the
spec.autoscaling
field from the YAML file. -
Modify the
spec.replicas
field in the YAML file with the number of replicas you want. - Save the file to submit the changes.
1.7.6.2. Adding worker nodes to OpenShift Container Platform clusters
If you are using central infrastructure management, you can customize your OpenShift Container Platform clusters by adding additional production environment nodes.
Required access: Administrator
1.7.6.2.1. Prerequisite
You must have the new CA certificates required to trust the managed cluster API.
1.7.6.2.2. Creating a valid kubeconfig
Before adding production environment worker nodes to OpenShift Container Platform clusters, you must check if you have a valid kubeconfig
.
If the API certificates in your managed cluster changed, complete the following steps to update the kubeconfig
with new CA certificates:
Check if the
kubeconfig
for yourclusterDeployment
is valid by running the following commands. Replace<kubeconfig_name>
with the name of your currentkubeconfig
and replace<cluster_name>
with the name of your cluster:export <kubeconfig_name>=$(oc get cd $<cluster_name> -o "jsonpath={.spec.clusterMetadata.adminKubeconfigSecretRef.name}") oc extract secret/$<kubeconfig_name> --keys=kubeconfig --to=- > original-kubeconfig oc --kubeconfig=original-kubeconfig get node
If you receive the following error message, you must update your
kubeconfig
secret. If you receive no error message, continue to Adding worker nodes:Unable to connect to the server: tls: failed to verify certificate: x509: certificate signed by unknown authority
Get the
base64
encoded certificate bundle from yourkubeconfig
certificate-authority-data
field and decode it by running the following command:echo <base64 encoded blob> | base64 --decode > decoded-existing-certs.pem
Create an updated
kubeconfig
file by copying your original file. Run the following command and replace<new_kubeconfig_name>
with the name of your newkubeconfig
file:cp original-kubeconfig <new_kubeconfig_name>
Append new certificates to the decoded pem by running the following command:
cat decoded-existing-certs.pem new-ca-certificate.pem | openssl base64 -A
-
Add the
base64
output from the previous command as the value of thecertificate-authority-data
key in your newkubeconfig
file by using a text editor. Check if the new
kubeconfig
is valid by querying the API with the newkubeconfig
. Run the following command. Replace<new_kubeconfig_name>
with the name of your newkubeconfig
file:KUBECONFIG=<new_kubeconfig_name> oc get nodes
If you receive a successful output, the
kubeconfig
is valid.Update the
kubeconfig
secret in the Red Hat Advanced Cluster Management hub cluster by running the following command. Replace<new_kubeconfig_name>
with the name of your newkubeconfig
file:oc patch secret $original-kubeconfig --type='json' -p="[{'op': 'replace', 'path': '/data/kubeconfig', 'value': '$(openssl base64 -A -in <new_kubeconfig_name>)'},{'op': 'replace', 'path': '/data/raw-kubeconfig', 'value': '$(openssl base64 -A -in <new_kubeconfig_name>)'}]"
1.7.6.2.3. Adding worker nodes
If you have a valid kubeconfig
, complete the following steps to add production environment worker nodes to OpenShift Container Platform clusters:
Boot the machine that you want to use as a worker node from the ISO you previously downloaded.
Note: Make sure that the worker node meets the requirements for an OpenShift Container Platform worker node.
Wait for an agent to register after running the following command:
watch -n 5 "oc get agent -n managed-cluster"
If the agent registration is succesful, an agent is listed. Approve the agent for installation. This can take a few minutes.
Note: If the agent is not listed, exit the
watch
command by pressing Ctrl and C, then log in to the worker node to troubleshoot.If you are using late binding, run the following command to associate pending unbound agents with your OpenShift Container Platform cluster. Skip to step 5 if you are not using late binding:
oc get agent -n managed-cluster -ojson | jq -r '.items[] | select(.spec.approved==false) |select(.spec.clusterDeploymentName==null) | .metadata.name'| xargs oc -n managed-cluster patch -p '{"spec":{"clusterDeploymentName":{"name":"some-other-cluster","namespace":"managed-cluster"}}}' --type merge agent
Approve any pending agents for installation by running the following command:
oc get agent -n managed-cluster -ojson | jq -r '.items[] | select(.spec.approved==false) | .metadata.name'| xargs oc -n managed-cluster patch -p '{"spec":{"approved":true}}' --type merge agent
Wait for the installation of the worker node. When the worker node installation is complete, the worker node contacts the managed cluster with a Certificate Signing Request (CSR) to start the joining process. The CSR is automatically signed.
1.7.6.3. Adding control plane nodes to managed clusters
You can replace a failing control plane by adding control plane nodes to healthy or unhealthy managed clusters.
Required access: Administrator
1.7.6.3.1. Adding control plane nodes to healthy managed clusters
Complete the following steps to add control plane nodes to healthy managed clusters:
- Complete the steps in Adding worker nodes to OpenShift Container Platform clusters for your the new control plane node.
Set the agent to
master
before you approve the agent by running the following command:oc patch agent <AGENT-NAME> -p '{"spec":{"role": "master"}}' --type=merge
Note: CSRs are not automatically approved.
- Follow the steps in Installing a primary control plane node on a healthy cluster in the Assisted Installer for OpenShift Container Platform documentation
1.7.6.3.2. Adding control plane nodes to unhealthy managed clusters
Complete the following steps to add control plane nodes to unhealthy managed clusters:
- Remove the agent for unhealthy control plane nodes.
- If you used the zero-touch provisioning flow for deployment, remove the bare metal host.
- Complete the steps in Adding worker nodes to OpenShift Container Platform clusters for your the new control plane node.
Set the agent to
master
before you approve the agent by running the following command:oc patch agent <AGENT-NAME> -p '{"spec":{"role": "master"}}' --type=merge
Note: CSRs are not automatically approved.
- Follow the steps in Installing a primary control plane node on an unhealthy cluster in the Assisted Installer for OpenShift Container Platform documentation
1.7.7. Hibernating a created cluster
You can hibernate a cluster that was created using multicluster engine operator to conserve resources. A hibernating cluster requires significantly fewer resources than one that is running, so you can potentially lower your provider costs by moving clusters in and out of a hibernating state. This feature only applies to clusters that were created by multicluster engine operator in the following environments:
- Amazon Web Services
- Microsoft Azure
- Google Cloud Platform
1.7.7.1. Hibernate a cluster by using the console
To use the console to hibernate a cluster that was created by multicluster engine operator, complete the following steps:
- From the navigation menu, select Infrastructure > Clusters. Ensure that the Manage clusters tab is selected.
- Select Hibernate cluster from the Options menu for the cluster. Note: If the Hibernate cluster option is not available, you cannot hibernate the cluster. This can happen when the cluster is imported, and not created by multicluster engine operator.
The status for the cluster on the Clusters page is Hibernating
when the process completes.
Tip: You can hibernate multiple clusters by selecting the clusters that you want to hibernate on the Clusters page, and selecting Actions > Hibernate clusters.
Your selected cluster is hibernating.
1.7.7.2. Hibernate a cluster by using the CLI
To use the CLI to hibernate a cluster that was created by multicluster engine operator, complete the following steps:
Enter the following command to edit the settings for the cluster that you want to hibernate:
oc edit clusterdeployment <name-of-cluster> -n <namespace-of-cluster>
Replace
name-of-cluster
with the name of the cluster that you want to hibernate.Replace
namespace-of-cluster
with the namespace of the cluster that you want to hibernate.-
Change the value for
spec.powerState
toHibernating
. Enter the following command to view the status of the cluster:
oc get clusterdeployment <name-of-cluster> -n <namespace-of-cluster> -o yaml
Replace
name-of-cluster
with the name of the cluster that you want to hibernate.Replace
namespace-of-cluster
with the namespace of the cluster that you want to hibernate.When the process of hibernating the cluster is complete, the value of the type for the cluster is
type=Hibernating
.
Your selected cluster is hibernating.
1.7.7.3. Resuming normal operation of a hibernating cluster by using the console
To resume normal operation of a hibernating cluster by using the console, complete the following steps:
- From the navigation menu, select Infrastructure > Clusters. Ensure that the Manage clusters tab is selected.
- Select Resume cluster from the Options menu for the cluster that you want to resume.
The status for the cluster on the Clusters page is Ready
when the process completes.
Tip: You can resume multiple clusters by selecting the clusters that you want to resume on the Clusters page, and selecting Actions > Resume clusters.
Your selected cluster is resuming normal operation.
1.7.7.4. Resuming normal operation of a hibernating cluster by using the CLI
To resume normal operation of a hibernating cluster by using the CLI, complete the following steps:
Enter the following command to edit the settings for the cluster:
oc edit clusterdeployment <name-of-cluster> -n <namespace-of-cluster>
Replace
name-of-cluster
with the name of the cluster that you want to hibernate.Replace
namespace-of-cluster
with the namespace of the cluster that you want to hibernate.-
Change the value for
spec.powerState
toRunning
. Enter the following command to view the status of the cluster:
oc get clusterdeployment <name-of-cluster> -n <namespace-of-cluster> -o yaml
Replace
name-of-cluster
with the name of the cluster that you want to hibernate.Replace
namespace-of-cluster
with the namespace of the cluster that you want to hibernate.When the process of resuming the cluster is complete, the value of the type for the cluster is
type=Running
.
Your selected cluster is resuming normal operation.
1.7.8. Upgrading your cluster
After you create Red Hat OpenShift Container Platform clusters that you want to manage with multicluster engine operator, you can use the multicluster engine operator console to upgrade those clusters to the latest minor version that is available in the version channel that the managed cluster uses.
In a connected environment, the updates are automatically identified with notifications provided for each cluster that requires an upgrade in the console.
1.7.8.1. Prerequisites
Verify that you meet all of the prerequisites for upgrading to that version. You must update the version channel on the managed cluster before you can upgrade the cluster with the console.
Note: After you update the version channel on the managed cluster, the multicluster engine operator console displays the latest versions that are available for the upgrade.
- Your OpenShift Container Platform managed clusters must be in a Ready state.
Important: You cannot upgrade Red Hat OpenShift Kubernetes Service managed clusters or OpenShift Container Platform managed clusters on Red Hat OpenShift Dedicated by using the multicluster engine operator console.
1.7.8.2. Upgrading your cluster in a connected environment
To upgrade your cluster in a connected environment, complete the following steps:
- From the navigation menu, go to Infrastructure > Clusters. If an upgrade is available, it appears in the Distribution version column.
- Select the clusters in Ready state that you want to upgrade. You can only upgrade OpenShift Container Platform clusters in the console.
- Select Upgrade.
- Select the new version of each cluster.
- Select Upgrade.
If your cluster upgrade fails, the Operator generally retries the upgrade a few times, stops, and reports the status of the failing component. In some cases, the upgrade process continues to cycle through attempts to complete the process. Rolling your cluster back to a previous version following a failed upgrade is not supported. Contact Red Hat support for assistance if your cluster upgrade fails.
1.7.8.3. Selecting a channel
You can use the console to select a channel for your cluster upgrades on OpenShift Container Platform. After selecting a channel, you are automatically reminded of cluster upgrades that are available for both Errata versions and release versions.
To select a channel for your cluster, complete the following steps:
- From the navigation, select Infrastructure > Clusters.
- Select the name of the cluster that you want to change to view the Cluster details page. If a different channel is available for the cluster, an edit icon is displayed in the Channel field.
- Click the Edit icon to change the setting in the field.
- Select a channel in the New channel field.
You can find the reminders for the available channel updates in the Cluster details page of the cluster.
1.7.8.4. Upgrading a disconnected cluster
You can use OpenShift Update Service with multicluster engine operator to upgrade clusters in a disconnected environment.
In some cases, security concerns prevent clusters from being connected directly to the internet. This makes it difficult to know when upgrades are available, and how to process those upgrades. Configuring OpenShift Update Service can help.
OpenShift Update Service is a separate operator and operand that monitors the available versions of your managed clusters in a disconnected environment, and makes them available for upgrading your clusters in a disconnected environment. After you configure OpenShift Update Service, it can perform the following actions:
- Monitor when upgrades are available for your disconnected clusters.
- Identify which updates are mirrored to your local site for upgrading by using the graph data file.
- Notify you that an upgrade is available for your cluster by using the console.
The following topics explain the procedure for upgrading a disconnected cluster:
- Prerequisites
- Prepare your disconnected mirror registry
- Deploy the operator for OpenShift Update Service
- Build the graph data init container
- Configure certificate for the mirrored registry
- Deploy the OpenShift Update Service instance
- Override the default registry (optional)
- Deploy a disconnected catalog source
- Change the managed cluster parameter
- Viewing available upgrades
- Selecting a channel
- Upgrading the cluster
1.7.8.4.1. Prerequisites
You must have the following prerequisites before you can use OpenShift Update Service to upgrade your disconnected clusters:
A deployed hub cluster that is running on a supported OpenShift Container Platform version with restricted OLM configured. See Using Operator Lifecycle Manager on restricted networks for details about how to configure restricted OLM.
Note: Make a note of the catalog source image when you configure restricted OLM.
- An OpenShift Container Platform cluster that is managed by the hub cluster
Access credentials to a local repository where you can mirror the cluster images. See Disconnected installation mirroring for more information about how to create this repository.
Note: The image for the current version of the cluster that you upgrade must always be available as one of the mirrored images. If an upgrade fails, the cluster reverts back to the version of the cluster at the time that the upgrade was attempted.
1.7.8.4.2. Prepare your disconnected mirror registry
You must mirror both the image that you want to upgrade to and the current image that you are upgrading from to your local mirror registry. Complete the following steps to mirror the images:
Create a script file that contains content that resembles the following example:
UPSTREAM_REGISTRY=quay.io PRODUCT_REPO=openshift-release-dev RELEASE_NAME=ocp-release OCP_RELEASE=4.12.2-x86_64 LOCAL_REGISTRY=$(hostname):5000 LOCAL_SECRET_JSON=/path/to/pull/secret 1 oc adm -a ${LOCAL_SECRET_JSON} release mirror \ --from=${UPSTREAM_REGISTRY}/${PRODUCT_REPO}/${RELEASE_NAME}:${OCP_RELEASE} \ --to=${LOCAL_REGISTRY}/ocp4 \ --to-release-image=${LOCAL_REGISTRY}/ocp4/release:${OCP_RELEASE}
- 1
- Replace
/path/to/pull/secret
with the path to your OpenShift Container Platform pull secret.
Run the script to mirror the images, configure settings, and separate the release images from the release content.
You can use the output of the last line of this script when you create your
ImageContentSourcePolicy
.
1.7.8.4.3. Deploy the operator for OpenShift Update Service
To deploy the operator for OpenShift Update Service in your OpenShift Container Platform environment, complete the following steps:
- On the hub cluster, access the OpenShift Container Platform operator hub.
-
Deploy the operator by selecting
OpenShift Update Service Operator
. Update the default values, if necessary. The deployment of the operator creates a new project namedopenshift-cincinnati
. Wait for the installation of the operator to finish.
You can check the status of the installation by entering the
oc get pods
command on your OpenShift Container Platform command line. Verify that the operator is in therunning
state.
1.7.8.4.4. Build the graph data init container
OpenShift Update Service uses graph data information to determine the available upgrades. In a connected environment, OpenShift Update Service pulls the graph data information for available upgrades directly from the Cincinnati graph data GitHub repository. Because you are configuring a disconnected environment, you must make the graph data available in a local repository by using an init container
. Complete the following steps to create a graph data init container
:
Clone the graph data Git repository by entering the following command:
git clone https://github.com/openshift/cincinnati-graph-data
Create a file that contains the information for your graph data
init
. You can find this sample Dockerfile in thecincinnati-operator
GitHub repository. The contents of the file is shown in the following sample:FROM registry.access.redhat.com/ubi8/ubi:8.1 1 RUN curl -L -o cincinnati-graph-data.tar.gz https://github.com/openshift/cincinnati-graph-data/archive/master.tar.gz 2 RUN mkdir -p /var/lib/cincinnati/graph-data/ 3 CMD exec /bin/bash -c "tar xvzf cincinnati-graph-data.tar.gz -C /var/lib/ cincinnati/graph-data/ --strip-components=1" 4
In this example:
Run the following commands to build the
graph data init container
:podman build -f <path_to_Dockerfile> -t <${DISCONNECTED_REGISTRY}/cincinnati/cincinnati-graph-data-container>:latest 1 2 podman push <${DISCONNECTED_REGISTRY}/cincinnati/cincinnati-graph-data-container><2>:latest --authfile=</path/to/pull_secret>.json 3
Note: You can also replace
podman
in the commands withdocker
, if you don’t havepodman
installed.
1.7.8.4.5. Configure certificate for the mirrored registry
If you are using a secure external container registry to store your mirrored OpenShift Container Platform release images, OpenShift Update Service requires access to this registry to build an upgrade graph. Complete the following steps to configure your CA certificate to work with the OpenShift Update Service pod:
Find the OpenShift Container Platform external registry API, which is located in
image.config.openshift.io
. This is where the external registry CA certificate is stored.See Configuring additional trust stores for image registry access in the OpenShift Container Platform documentation for more information.
-
Create a ConfigMap in the
openshift-config
namespace. Add your CA certificate under the key
updateservice-registry
. OpenShift Update Service uses this setting to locate your certificate:apiVersion: v1 kind: ConfigMap metadata: name: trusted-ca data: updateservice-registry: | -----BEGIN CERTIFICATE----- ... -----END CERTIFICATE-----
Edit the
cluster
resource in theimage.config.openshift.io
API to set theadditionalTrustedCA
field to the name of the ConfigMap that you created.oc patch image.config.openshift.io cluster -p '{"spec":{"additionalTrustedCA":{"name":"trusted-ca"}}}' --type merge
Replace
trusted-ca
with the path to your new ConfigMap.
The OpenShift Update Service Operator watches the image.config.openshift.io
API and the ConfigMap you created in the openshift-config
namespace for changes, then restart the deployment if the CA cert has changed.
1.7.8.4.6. Deploy the OpenShift Update Service instance
When you finish deploying the OpenShift Update Service instance on your hub cluster, this instance is located where the images for the cluster upgrades are mirrored and made available to the disconnected managed cluster. Complete the following steps to deploy the instance:
If you do not want to use the default namespace of the operator, which is
openshift-cincinnati
, create a namespace for your OpenShift Update Service instance:- In the OpenShift Container Platform hub cluster console navigation menu, select Administration > Namespaces.
- Select Create Namespace.
- Add the name of your namespace, and any other information for your namespace.
- Select Create to create the namespace.
- In the Installed Operators section of the OpenShift Container Platform console, select OpenShift Update Service Operator.
- Select Create Instance in the menu.
Paste the contents from your OpenShift Update Service instance. Your YAML instance might resemble the following manifest:
apiVersion: cincinnati.openshift.io/v1beta2 kind: Cincinnati metadata: name: openshift-update-service-instance namespace: openshift-cincinnati spec: registry: <registry_host_name>:<port> 1 replicas: 1 repository: ${LOCAL_REGISTRY}/ocp4/release graphDataImage: '<host_name>:<port>/cincinnati-graph-data-container'2
- 1
- Replace the
spec.registry
value with the path to your local disconnected registry for your images. - 2
- Replace the
spec.graphDataImage
value with the path to your graph data init container. This is the same value that you used when you ran thepodman push
command to push your graph data init container.
- Select Create to create the instance.
-
From the hub cluster CLI, enter the
oc get pods
command to view the status of the instance creation. It might take a while, but the process is complete when the result of the command shows that the instance and the operator are running.
1.7.8.4.7. Override the default registry (optional)
Note: The steps in this section only apply if you have mirrored your releases into your mirrored registry.
OpenShift Container Platform has a default image registry value that specifies where it finds the upgrade packages. In a disconnected environment, you can create an override to replace that value with the path to your local image registry where you mirrored your release images.
Complete the following steps to override the default registry:
Create a YAML file named
mirror.yaml
that resembles the following content:apiVersion: operator.openshift.io/v1alpha1 kind: ImageContentSourcePolicy metadata: name: <your-local-mirror-name>1 spec: repositoryDigestMirrors: - mirrors: - <your-registry>2 source: registry.redhat.io
Note: You can find your path to your local mirror by entering the
oc adm release mirror
command.Using the command line of the managed cluster, run the following command to override the default registry:
oc apply -f mirror.yaml
1.7.8.4.8. Deploy a disconnected catalog source
On the managed cluster, disable all of the default catalog sources and create a new one. Complete the following steps to change the default location from a connected location to your disconnected local registry:
Create a YAML file named
source.yaml
that resembles the following content:apiVersion: config.openshift.io/v1 kind: OperatorHub metadata: name: cluster spec: disableAllDefaultSources: true --- apiVersion: operators.coreos.com/v1alpha1 kind: CatalogSource metadata: name: my-operator-catalog namespace: openshift-marketplace spec: sourceType: grpc image: '<registry_host_name>:<port>/olm/redhat-operators:v1'1 displayName: My Operator Catalog publisher: grpc
- 1
- Replace the value of
spec.image
with the path to your local restricted catalog source image.
On the command line of the managed cluster, change the catalog source by running the following command:
oc apply -f source.yaml
1.7.8.4.9. Change the managed cluster parameter
Update the ClusterVersion
resource information on the managed cluster to change the default location from where it retrieves its upgrades.
From the managed cluster, confirm that the
ClusterVersion
upstream parameter is currently the default public OpenShift Update Service operand by entering the following command:oc get clusterversion -o yaml
The returned content might resemble the following content with
4.x
set as the supported version:apiVersion: v1 items: - apiVersion: config.openshift.io/v1 kind: ClusterVersion [..] spec: channel: stable-4.x upstream: https://api.openshift.com/api/upgrades_info/v1/graph
From the hub cluster, identify the route URL to the OpenShift Update Service operand by entering the following command:
oc get routes
Note the returned value for later steps.
On the command line of the managed cluster, edit the
ClusterVersion
resource by entering the following command:oc edit clusterversion version
Replace the value of
spec.channel
with your new version.Replace the value of
spec.upstream
with the path to your hub cluster OpenShift Update Service operand. You can complete the following steps to determine the path to your operand:Run the following command on the hub cluster:
oc get routes -A
-
Find the path to
cincinnati
. The path the operand is the value in theHOST/PORT
field.
On the command line of the managed cluster, confirm that the upstream parameter in the
ClusterVersion
is updated with the local hub cluster OpenShift Update Service URL by entering the following command:oc get clusterversion -o yaml
The results resemble the following content:
apiVersion: v1 items: - apiVersion: config.openshift.io/v1 kind: ClusterVersion [..] spec: channel: stable-4.x upstream: https://<hub-cincinnati-uri>/api/upgrades_info/v1/graph
1.7.8.4.10. Viewing available upgrades
On the Clusters page, the Distribution version of the cluster indicates that there is an upgrade available, if there is an upgrade in the disconnected registry. You can view the available upgrades by selecting the cluster and selecting Upgrade clusters from the Actions menu. If the optional upgrade paths are available, the available upgrades are listed.
Note: No available upgrade versions are shown if the current version is not mirrored into the local image repository.
1.7.8.4.11. Selecting a channel
You can use the console to select a channel for your cluster upgrades on OpenShift Container Platform version 4.6 or later. Those versions must be available on the mirror registry. Complete the steps in Selecting a channel to specify a channel for your upgrades.
1.7.8.4.12. Upgrading the cluster
After you configure the disconnected registry, multicluster engine operator and OpenShift Update Service use the disconnected registry to determine if upgrades are available. If no available upgrades are displayed, make sure that you have the release image of the current level of the cluster and at least one later level mirrored in the local repository. If the release image for the current version of the cluster is not available, no upgrades are available.
On the Clusters page, the Distribution version of the cluster indicates that there is an upgrade available, if there is an upgrade in the disconnected registry. You can upgrade the image by clicking Upgrade available and selecting the version for the upgrade.
The managed cluster is updated to the selected version.
If your cluster upgrade fails, the Operator generally retries the upgrade a few times, stops, and reports the status of the failing component. In some cases, the upgrade process continues to cycle through attempts to complete the process. Rolling your cluster back to a previous version following a failed upgrade is not supported. Contact Red Hat support for assistance if your cluster upgrade fails.
1.7.9. Using cluster proxy add-ons
In some environments, a managed cluster is behind a firewall and cannot be accessed directly by the hub cluster. To gain access, you can set up a proxy add-on to access the kube-apiserver
of the managed cluster to provide a more secure connection.
Important: There must not be a cluster-wide proxy configuration on your hub cluster.
Required access: Editor
To configure a cluster proxy add-on for a hub cluster and a managed cluster, complete the following steps:
Configure the
kubeconfig
file to access the managed clusterkube-apiserver
by completing the following steps:Provide a valid access token for the managed cluster.
Note: : You can use the corresponding token of the service account. You can also use the default service account that is in the default namespace.
Export the
kubeconfig
file of the managed cluster by running the following command:export KUBECONFIG=<managed-cluster-kubeconfig>
Add a role to your service account that allows it to access pods by running the following commands:
oc create role -n default test-role --verb=list,get --resource=pods oc create rolebinding -n default test-rolebinding --serviceaccount=default:default --role=test-role
Run the following command to locate the secret of the service account token:
oc get secret -n default | grep <default-token>
Replace
default-token
with the name of your secret.Run the following command to copy the token:
export MANAGED_CLUSTER_TOKEN=$(kubectl -n default get secret <default-token> -o jsonpath={.data.token} | base64 -d)
Replace
default-token
with the name of your secret.
Configure the
kubeconfig
file on the Red Hat Advanced Cluster Management hub cluster.Export the current
kubeconfig
file on the hub cluster by running the following command:oc config view --minify --raw=true > cluster-proxy.kubeconfig
Modify the
server
file with your editor. This example uses commands when usingsed
. Runalias sed=gsed
, if you are using OSX.export TARGET_MANAGED_CLUSTER=<managed-cluster-name> export NEW_SERVER=https://$(oc get route -n multicluster-engine cluster-proxy-addon-user -o=jsonpath='{.spec.host}')/$TARGET_MANAGED_CLUSTER sed -i'' -e '/server:/c\ server: '"$NEW_SERVER"'' cluster-proxy.kubeconfig export CADATA=$(oc get configmap -n openshift-service-ca kube-root-ca.crt -o=go-template='{{index .data "ca.crt"}}' | base64) sed -i'' -e '/certificate-authority-data:/c\ certificate-authority-data: '"$CADATA"'' cluster-proxy.kubeconfig
Delete the original user credentials by entering the following commands:
sed -i'' -e '/client-certificate-data/d' cluster-proxy.kubeconfig sed -i'' -e '/client-key-data/d' cluster-proxy.kubeconfig sed -i'' -e '/token/d' cluster-proxy.kubeconfig
Add the token of the service account:
sed -i'' -e '$a\ token: '"$MANAGED_CLUSTER_TOKEN"'' cluster-proxy.kubeconfig
List all of the pods on the target namespace of the target managed cluster by running the following command:
oc get pods --kubeconfig=cluster-proxy.kubeconfig -n <default>
Replace the
default
namespace with the namespace that you want to use.Access other services on the managed cluster. This feature is available when the managed cluster is a Red Hat OpenShift Container Platform cluster. The service must use
service-serving-certificate
to generate server certificates:From the managed cluster, use the following service account token:
export PROMETHEUS_TOKEN=$(kubectl get secret -n openshift-monitoring $(kubectl get serviceaccount -n openshift-monitoring prometheus-k8s -o=jsonpath='{.secrets[0].name}') -o=jsonpath='{.data.token}' | base64 -d)
From the hub cluster, convert the certificate authority to a file by running the following command:
oc get configmap kube-root-ca.crt -o=jsonpath='{.data.ca\.crt}' > hub-ca.crt
Get Prometheus metrics of the managed cluster by using the following commands:
export SERVICE_NAMESPACE=openshift-monitoring export SERVICE_NAME=prometheus-k8s export SERVICE_PORT=9091 export SERVICE_PATH="api/v1/query?query=machine_cpu_sockets" curl --cacert hub-ca.crt $NEW_SERVER/api/v1/namespaces/$SERVICE_NAMESPACE/services/$SERVICE_NAME:$SERVICE_PORT/proxy-service/$SERVICE_PATH -H "Authorization: Bearer $PROMETHEUS_TOKEN"
1.7.9.1. Configuring proxy settings for cluster proxy add-ons
You can configure the proxy settings for cluster proxy add-ons to allow a managed cluster to communicate with the hub cluster through a HTTP and HTTPS proxy server. You might need to configure the proxy settings if the cluster proxy add-on agent requires access to the hub cluster through the proxy server.
To configure the proxy settings for the cluster proxy add-on, complete the following steps:
Create an
AddOnDeploymentConfig
resource on your hub cluster and add thespec.proxyConfig
parameter. See the following example:apiVersion: addon.open-cluster-management.io/v1alpha1 kind: AddOnDeploymentConfig metadata: name: <name> 1 namespace: <namespace> 2 spec: agentInstallNamespace: open-cluster-managment-agent-addon proxyConfig: httpsProxy: "http://<username>:<password>@<ip>:<port>" 3 noProxy: ".cluster.local,.svc,172.30.0.1" 4 caBundle: <value> 5
- 1
- Add your add-on deployment config name.
- 2
- Add your managed cluster name.
- 3
- Specify either a HTTP proxy or a HTTPS proxy.
- 4
- Add the IP address of the
kube-apiserver
. To get the IP address, run following command on your managed cluster:oc -n default describe svc kubernetes | grep IP:
- 5
- If you specify a HTTPS proxy in the
httpsProxy
field, set the proxy server CA bundle.
Update the
ManagedClusterAddOn
resource by referencing theAddOnDeploymentConfig
resource that you created. See the following example:apiVersion: addon.open-cluster-management.io/v1alpha1 kind: ManagedClusterAddOn metadata: name: cluster-proxy namespace: <namespace> 1 spec: installNamespace: open-cluster-managment-addon configs: group: addon.open-cluster-management.io resource: AddonDeploymentConfig name: <name> 2 namespace: <namespace> 3
1.7.10. Configuring Ansible Automation Platform tasks to run on managed clusters
multicluster engine operator is integrated with Red Hat Ansible Automation Platform so that you can create prehook and posthook Ansible job instances that occur before or after creating or upgrading your clusters. Configuring prehook and posthook jobs for cluster destroy, and cluster scale actions are not supported.
Required access: Cluster administrator
- Prerequisites
- Configuring an Automation template to run on a cluster by using the console
- Creating an Automation template
- Viewing the status of an Ansible job
- Pushing custom labels from the ClusterCurator resource to the automation job pod
- Using the ClusterCurator for Extended Update Support (EUS) upgrades
1.7.10.1. Prerequisites
You must meet the following prerequisites to run Automation templates on your clusters:
- Install OpenShift Container Platform.
- Install the Ansible Automation Platform Resource Operator to connect Ansible jobs to the lifecycle of Git subscriptions. For best results when using the Automation template to launch Ansible Automation Platform jobs, the Ansible Automation Platform job template should be idempotent when it is run. You can find the Ansible Automation Platform Resource Operator in the OpenShift Container Platform OperatorHub.
1.7.10.2. Configuring an Automation template to run on a cluster by using the console
You can specify the Automation template that you want to use for a cluster when you create the cluster, when you import the cluster, or after you create the cluster.
To specify the template when creating or importing a cluster, select the Ansible template that you want to apply to the cluster in the Automation step. If there are no Automation templates, click Add automation template to create one.
To specify the template after creating a cluster, click Update automation template in the action menu of an existing cluster. You can also use the Update automation template option to update an existing automation template.
1.7.10.3. Creating an Automation template
To initiate an Ansible job with a cluster installation or upgrade, you must create an Automation template to specify when you want the jobs to run. They can be configured to run before or after the cluster installs or upgrades.
To specify the details about running the Ansible template while creating a template, complete the steps in the console:
- Select Infrastructure > Automation from the navigation.
Select the applicable path for your situation:
- If you want to create a new template, click Create Ansible template and continue with step 3.
- If you want to modify an existing template, click Edit template from the Options menu of the template that you want to modify and continue with step 5.
- Enter a unique name for your template, which contains lowercase alphanumeric characters or a hyphen (-).
- Select the credential that you want to use for the new template.
After you select a credential, you can select an Ansible inventory to use for all the jobs. To link an Ansible credential to an Ansible template, complete the following steps:
- From the navigation, select Automation. Any template in the list of templates that is not linked to a credential contains a Link to credential icon that you can use to link the template to an existing credential. Only the credentials in the same namespace as the template are displayed.
- If there are no credentials that you can select, or if you do not want to use an existing credential, select Edit template from the Options menu for the template that you want to link.
- Click Add credential and complete the procedure in Creating a credential for Ansible Automation Platform if you have to create your credential.
- After you create your credential in the same namespace as the template, select the credential in the Ansible Automation Platform credential field when you edit the template.
- If you want to initiate any Ansible jobs before the cluster is installed, select Add an Automation template in the Pre-install Automation templates section.
Select between a
Job template
or aWorkflow job template
in the modal that appears. You can also addjob_tags
,skip_tags
, and workflow types.-
Use the Extra variables field to pass data to the
AnsibleJob
resource in the form ofkey=value
pairs. -
Special keys
cluster_deployment
andinstall_config
are passed automatically as extra variables. They contain general information about the cluster and details about the cluster installation configuration.
-
Use the Extra variables field to pass data to the
- Select the name of the prehook and posthook Ansible jobs to add to the installation or upgrade of the cluster.
- Drag the Ansible jobs to change the order, if necessary.
-
Repeat steps 5 - 7 for any Automation templates that you want to initiate after the cluster is installed in the Post-install Automation templates section, the Pre-upgrade Automation templates section, and the Post-upgrade Automation templates section. When upgrading a cluster, you can use the
Extra variables
field to pass data to theAnsibleJob
resource in the form ofkey=value
pairs. In addition to thecluster_deployment
andinstall_config
special keys, thecluster_info
special key is also passed automatically as an extra variable containing data from theManagedClusterInfo
resource.
Your Ansible template is configured to run on clusters that specify this template when the designated actions occur.
1.7.10.4. Viewing the status of an Ansible job
You can view the status of a running Ansible job to ensure that it started, and is running successfully. To view the current status of a running Ansible job, complete the following steps:
- In the menu, select Infrastructure > Clusters to access the Clusters page.
- Select the name of the cluster to view its details.
View the status of the last run of the Ansible job on the cluster information. The entry shows one of the following statuses:
-
When an install prehook or posthook job fails, the cluster status shows
Failed
. - When an upgrade prehook or posthook job fails, a warning is displayed in the Distribution field that the upgrade failed.
-
When an install prehook or posthook job fails, the cluster status shows
1.7.10.5. Running a failed Ansible job again
You can retry an upgrade from the Clusters page if the cluster prehook or posthook failed.
To save time, you can also run only the failed Ansible posthooks that are part of cluster automation templates. Complete the following steps to run only the posthooks again, without retrying the entire upgrade:
Add the following content to the root of the
ClusterCurator
resource to run the install posthook again:operation: retryPosthook: installPosthook
Add the following content to the root of the
ClusterCurator
resource to run the upgrade posthook again:operation: retryPosthook: upgradePosthook
After adding the content, a new job is created to run the Ansible posthook.
1.7.10.6. Specifying an Ansible inventory to use for all jobs
You can use the ClusterCurator
resource to specify an Ansible inventory to use for all jobs. See the following example, replacing channel
and desiredUpdate
with the correct values for your ClusterCurator
:
+
apiVersion: cluster.open-cluster-management.io/v1beta1 kind: ClusterCurator metadata: name: test-inno namespace: test-inno spec: desiredCuration: upgrade destroy: {} install: {} scale: {} upgrade: channel: stable-4.x desiredUpdate: 4.x.1 monitorTimeout: 150 posthook: - extra_vars: {} clusterName: test-inno type: post_check name: ACM Upgrade Checks prehook: - extra_vars: {} clusterName: test-inno type: pre_check name: ACM Upgrade Checks towerAuthSecret: awx
To verify that the inventory is created, you can check the status
field in the ClusterCurator
resource for messages specifying that all jobs completed successfully.
1.7.10.7. Pushing custom labels from the ClusterCurator resource to the automation job pod
You can use the ClusterCurator
resource to push custom labels to the automation job pod created by the Cluster Curator. You can push the custom labels on all curation types. See the following example:
apiVersion: cluster.open-cluster-management.io/v1beta1 kind: ClusterCurator metadata: name: cluster1 {{{} namespace: cluster1 labels: test1: test1 test2: test2 {}}}spec: desiredCuration: install install: jobMonitorTimeout: 5 posthook: - extra_vars: {} name: Demo Job Template type: Job prehook: - extra_vars: {} name: Demo Job Template type: Job towerAuthSecret: toweraccess
1.7.10.8. Using the ClusterCurator for Extended Update Support (EUS) upgrades
You can use the ClusterCurator
resource to perform an easier, automatic upgrade between EUS releases.
Add
spec.upgrade.intermediateUpdate
to theClusterCurator
resource with the intermediate release value. See the following sample, where the intermediate release is4.14.x
, and thedesiredUpdate
is4.15.x
:spec: desiredCuration: upgrade upgrade: intermediateUpdate: 4.14.x desiredUpdate: 4.15.x monitorTimeout: 120
Optional: You can pause the
machineconfigpools
to skip the intermediate release for faster upgrade. EnterUnpause machinepool
in theposthook
job, andpause machinepool
in theprehook
job. See the following example:posthook: - extra_vars: {} name: Unpause machinepool type: Job prehook: - extra_vars: {} name: Pause machinepool type: Job
See the following full example of the ClusterCurator
that is configured to upgrade EUS to EUS:
apiVersion: cluster.open-cluster-management.io/v1beta1 kind: ClusterCurator metadata: annotations: cluster.open-cluster-management.io/upgrade-clusterversion-backoff-limit: "10" name: your-name namespace: your-namespace spec: desiredCuration: upgrade upgrade: intermediateUpdate: 4.14.x desiredUpdate: 4.15.x monitorTimeout: 120 posthook: - extra_vars: {} name: Unpause machinepool type: Job prehook: - extra_vars: {} name: Pause machinepool type: Job
1.7.11. Configuring Ansible Automation Platform jobs to run on hosted clusters
Red Hat Ansible Automation Platform is integrated with multicluster engine operator so that you can create prehook and posthook Ansible Automation Platform job instances that occur before or after you create or update hosted clusters.
Required access: Cluster administrator
1.7.11.1. Prerequisites
You must meet the following prerequisites to run Automation templates on your clusters:
- A supported version of OpenShift Container Platform
- Install the Ansible Automation Platform Resource Operator to connect Ansible Automation Platform jobs to the lifecycle of Git subscriptions. When you use the Automation template to start Ansible Automation Platform jobs, ensure that the Ansible Automation Platform job template is idempotent when it is run. You can find the Ansible Automation Platform Resource Operator in the OpenShift Container Platform OperatorHub.
1.7.11.2. Running an Ansible Automation Platform job to install a hosted cluster
To start an Ansible Automation Platform job that installs a hosted cluster, complete the following steps:
Create the
HostedCluster
andNodePool
resources, including thepausedUntil: true
field. If you use thehcp create cluster
command line interface command, you can specify the--pausedUntil: true
flag.See the following examples:
apiVersion: hypershift.openshift.io/v1beta1 kind: HostedCluster metadata: name: my-cluster namespace: clusters spec: pausedUntil: 'true'
apiVersion: hypershift.openshift.io/v1beta1 kind: NodePool metadata: name: my-cluster-us-east-2 namespace: clusters spec: pausedUntil: 'true'
Create a
ClusterCurator
resource with the same name as theHostedCluster
resource and in the same namespace as theHostedCluster
resource. See the following example:apiVersion: cluster.open-cluster-management.io/v1beta1 kind: ClusterCurator metadata: name: my-cluster namespace: clusters labels: open-cluster-management: curator spec: desiredCuration: install install: jobMonitorTimeout: 5 prehook: - name: Demo Job Template extra_vars: variable1: something-interesting variable2: 2 - name: Demo Job Template posthook: - name: Demo Job Template towerAuthSecret: toweraccess
If your Ansible Automation Platform Tower requires authentication, create a secret resource. See the following example:
apiVersion: v1 kind: Secret metadata: name: toweraccess namespace: clusters stringData: host: https://my-tower-domain.io token: ANSIBLE_TOKEN_FOR_admin
1.7.11.3. Running an Ansible Automation Platform job to update a hosted cluster
To run an Ansible Automation Platform job that updates a hosted cluster, edit the ClusterCurator
resource of the hosted cluster that you want to update. See the following example:
apiVersion: cluster.open-cluster-management.io/v1beta1
kind: ClusterCurator
metadata:
name: my-cluster
namespace: clusters
labels:
open-cluster-management: curator
spec:
desiredCuration: upgrade
upgrade:
desiredUpdate: 4.15.1 1
monitorTimeout: 120
prehook:
- name: Demo Job Template
extra_vars:
variable1: something-interesting
variable2: 2
- name: Demo Job Template
posthook:
- name: Demo Job Template
towerAuthSecret: toweraccess
- 1
- For details about supported versions, see Hosted control planes.
Note: When you update a hosted cluster in this way, you update both the hosted control plane and the node pools to the same version. Updating the hosted control planes and node pools to different versions is not supported.
1.7.11.4. Running an Ansible Automation Platform job to delete a hosted cluster
To run an Ansible Automation Platform job that deletes a hosted cluster, edit the ClusterCurator
resource of the hosted cluster that you want to delete. See the following example:
apiVersion: cluster.open-cluster-management.io/v1beta1 kind: ClusterCurator metadata: name: my-cluster namespace: clusters labels: open-cluster-management: curator spec: desiredCuration: destroy destroy: jobMonitorTimeout: 5 prehook: - name: Demo Job Template extra_vars: variable1: something-interesting variable2: 2 - name: Demo Job Template posthook: - name: Demo Job Template towerAuthSecret: toweraccess
Note: Deleting a hosted cluster on AWS is not supported.
1.7.11.5. Additional resources
-
For more information about the hosted control plane command line interface,
hcp
, see Installing the hosted control planes command-line interface. - For more information about hosted clusters, including supported versions, see Introduction to hosted control planes.
1.7.12. ClusterClaims
A ClusterClaim
is a cluster-scoped custom resource definition (CRD) on a managed cluster. A ClusterClaim
represents a piece of information that a managed cluster claims. You can use the ClusterClaim
to determine the Placement of the resource on the target clusters.
The following example shows a ClusterClaim
that is identified in the YAML file:
apiVersion: cluster.open-cluster-management.io/v1alpha1 kind: ClusterClaim metadata: name: id.openshift.io spec: value: 95f91f25-d7a2-4fc3-9237-2ef633d8451c
The following table shows the defined ClusterClaim
list for a cluster that multicluster engine operator manages:
Claim name | Reserved | Mutable | Description |
---|---|---|---|
| true | false | ClusterID defined in upstream proposal |
| true | true | Kubernetes version |
| true | false | Platform the managed cluster is running on, such as AWS, GCE, and Equinix Metal |
| true | false | Product name, such as OpenShift, Anthos, EKS and GKE |
| false | false | OpenShift Container Platform external ID, which is only available for an OpenShift Container Platform cluster |
| false | true | URL of the management console, which is only available for an OpenShift Container Platform cluster |
| false | true | OpenShift Container Platform version, which is only available for an OpenShift Container Platform cluster |
If any of the previous claims are deleted or updated on managed cluster, they are restored or rolled back to a previous version automatically.
After the managed cluster joins the hub, any ClusterClaim
that is created on a managed cluster is synchronized with the status of the ManagedCluster
resource on the hub cluster. See the following example of clusterClaims
for a ManagedCluster
, replacing 4.x
with a supported version of OpenShift Container Platform:
apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: labels: cloud: Amazon clusterID: 95f91f25-d7a2-4fc3-9237-2ef633d8451c installer.name: multiclusterhub installer.namespace: open-cluster-management name: cluster1 vendor: OpenShift name: cluster1 spec: hubAcceptsClient: true leaseDurationSeconds: 60 status: allocatable: cpu: '15' memory: 65257Mi capacity: cpu: '18' memory: 72001Mi clusterClaims: - name: id.k8s.io value: cluster1 - name: kubeversion.open-cluster-management.io value: v1.18.3+6c42de8 - name: platform.open-cluster-management.io value: AWS - name: product.open-cluster-management.io value: OpenShift - name: id.openshift.io value: 95f91f25-d7a2-4fc3-9237-2ef633d8451c - name: consoleurl.openshift.io value: 'https://console-openshift-console.apps.xxxx.dev04.red-chesterfield.com' - name: version.openshift.io value: '4.x' conditions: - lastTransitionTime: '2020-10-26T07:08:49Z' message: Accepted by hub cluster admin reason: HubClusterAdminAccepted status: 'True' type: HubAcceptedManagedCluster - lastTransitionTime: '2020-10-26T07:09:18Z' message: Managed cluster joined reason: ManagedClusterJoined status: 'True' type: ManagedClusterJoined - lastTransitionTime: '2020-10-30T07:20:20Z' message: Managed cluster is available reason: ManagedClusterAvailable status: 'True' type: ManagedClusterConditionAvailable version: kubernetes: v1.18.3+6c42de8
1.7.12.1. Create custom ClusterClaims
You can create a ClusterClaim
resource with a custom name on a managed cluster, which makes it easier to identify. The custom ClusterClaim
resource is synchronized with the status of the ManagedCluster
resource on the hub cluster. The following content shows an example of a definition for a customized ClusterClaim
resource:
apiVersion: cluster.open-cluster-management.io/v1alpha1 kind: ClusterClaim metadata: name: <custom_claim_name> spec: value: <custom_claim_value>
The length of spec.value
field must be 1024 or less. The create
permission on resource clusterclaims.cluster.open-cluster-management.io
is required to create a ClusterClaim
resource.
1.7.12.2. List existing ClusterClaims
You can use the kubectl
command to list the ClusterClaims that apply to your managed cluster so that you can compare your ClusterClaim to an error message.
Note: Make sure you have list
permission on resource clusterclaims.cluster.open-cluster-management.io
.
Run the following command to list all existing ClusterClaims that are on the managed cluster:
kubectl get clusterclaims.cluster.open-cluster-management.io
1.7.13. ManagedClusterSets
A ManagedClusterSet
is a group of managed clusters. A managed cluster set, can help you manage access to all of your managed clusters. You can also create a ManagedClusterSetBinding
resource to bind a ManagedClusterSet
resource to a namespace.
Each cluster must be a member of a managed cluster set. When you install the hub cluster, a ManagedClusterSet
resource is created called default
. All clusters that are not assigned to a managed cluster set are automatically assigned to the default
managed cluster set. You cannot delete or update the default
managed cluster set.
Continue reading to learn more about how to create and manage managed cluster sets:
1.7.13.1. Creating a ManagedClusterSet
You can group managed clusters together in a managed cluster set to limit the user access on managed clusters.
Required access: Cluster administrator
A ManagedClusterSet
is a cluster-scoped resource, so you must have cluster administration permissions for the cluster where you are creating the ManagedClusterSet
. A managed cluster cannot be included in more than one ManagedClusterSet
. You can create a managed cluster set from either the multicluster engine operator console or from the CLI.
Note: Cluster pools that are not added to a managed cluster set are not added to the default ManagedClusterSet
resource. After a cluster is claimed from the cluster pool, the cluster is added to the default ManagedClusterSet
.
When you create a managed cluster, the following are automatically created to ease management:
-
A
ManagedClusterSet
calledglobal
. -
The namespace called
open-cluster-management-global-set
. A
ManagedClusterSetBinding
calledglobal
to bind theglobal
ManagedClusterSet
to theopen-cluster-management-global-set
namespace.Important: You cannot delete, update, or edit the
global
managed cluster set. Theglobal
managed cluster set includes all managed clusters. See the following example:apiVersion: cluster.open-cluster-management.io/v1beta2 kind: ManagedClusterSetBinding metadata: name: global namespace: open-cluster-management-global-set spec: clusterSet: global
1.7.13.1.1. Creating a ManagedClusterSet by using the CLI
Add the following definition of the managed cluster set to your YAML file to create a managed cluster set by using the CLI:
apiVersion: cluster.open-cluster-management.io/v1beta2 kind: ManagedClusterSet metadata: name: <cluster_set>
Replace <cluster_set>
with the name of your managed cluster set.
1.7.13.1.2. Adding a cluster to a ManagedClusterSet
After you create your ManagedClusterSet
, you can add clusters to your managed cluster set by either following the instructions in the console or by using the CLI.
1.7.13.1.3. Adding clusters to a ManagedClusterSet by using the CLI
Complete the following steps to add a cluster to a managed cluster set by using the CLI:
Ensure that there is an RBAC
ClusterRole
entry that allows you to create on a virtual subresource ofmanagedclustersets/join
.Note: Without this permission, you cannot assign a managed cluster to a
ManagedClusterSet
. If this entry does not exist, add it to your YAML file. See the following example:kind: ClusterRole apiVersion: rbac.authorization.k8s.io/v1 metadata: name: clusterrole1 rules: - apiGroups: ["cluster.open-cluster-management.io"] resources: ["managedclustersets/join"] resourceNames: ["<cluster_set>"] verbs: ["create"]
Replace
<cluster_set>
with the name of yourManagedClusterSet
.Note: If you are moving a managed cluster from one
ManagedClusterSet
to another, you must have that permission available on both managed cluster sets.Find the definition of the managed cluster in the YAML file. See the following example definition:
apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: name: <cluster_name> spec: hubAcceptsClient: true
Add the
cluster.open-cluster-management.io/clusterset
paremeter and specify the name of theManagedClusterSet
. See the following example:apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: name: <cluster_name> labels: cluster.open-cluster-management.io/clusterset: <cluster_set> spec: hubAcceptsClient: true
1.7.13.2. Assigning RBAC permissions to a ManagedClusterSet
You can assign users or groups to your cluster set that are provided by the configured identity providers on the hub cluster.
Required access: Cluster administrator
See the following table for the three ManagedClusterSet
API RBAC permission levels:
Cluster set | Access permissions | Create permissions |
---|---|---|
| Full access permission to all of the cluster and cluster pool resources that are assigned to the managed cluster set. | Permission to create clusters, import clusters, and create cluster pools. The permissions must be assigned to the managed cluster set when it is created. |
|
Permission to bind the cluster set to a namespace by creating a | No permission to create clusters, import clusters, or create cluster pools. |
| Read only permission to all of the cluster and cluster pool resources that are assigned to the managed cluster set. | No permission to create clusters, import clusters, or create cluster pools. |
Note: You cannot apply the Cluster set admin
permission for the global cluster set.
Complete the following steps to assign users or groups to your managed cluster set from the console:
- From the OpenShift Container Platform console, navigate to Infrastructure > Clusters.
- Select the Cluster sets tab.
- Select your target cluster set.
- Select the Access management tab.
- Select Add user or group.
- Search for, and select the user or group that you want to provide access.
- Select the Cluster set admin or Cluster set view role to give to the selected user or user group. See Overview of roles in multicluster engine operator Role-based access control for more information.
- Select Add to submit the changes.
Your user or group is displayed in the table. It might take a few seconds for the permission assignments for all of the managed cluster set resources to be propagated to your user or group.
See Filtering ManagedClusters from ManagedCusterSets for placement information.
1.7.13.3. Creating a ManagedClusterSetBinding resource
A ManagedClusterSetBinding
resource binds a ManagedClusterSet
resource to a namespace. Applications and policies that are created in the same namespace can only access clusters that are included in the bound managed cluster set resource.
Access permissions to the namespace automatically apply to a managed cluster set that is bound to that namespace. If you have access permissions to that namespace, you automatically have permissions to access any managed cluster set that is bound to that namespace. If you only have permissions to access the managed cluster set, you do not automatically have permissions to access other managed cluster sets on the namespace.
You can create a managed cluster set binding by using the console or the command line.
1.7.13.3.1. Creating a ManagedClusterSetBinding by using the console
Complete the following steps to create a ManagedClusterSetBinding
by using the console:
- From the OpenShift Container Platform console, navigate to Infrastructure > Clusters and select the Cluster sets tab.
- Select the name of the cluster set that you want to create a binding for.
- Navigate to Actions > Edit namespace bindings.
- On the Edit namespace bindings page, select the namespace to which you want to bind the cluster set from the drop-down menu.
1.7.13.3.2. Creating a ManagedClusterSetBinding by using the CLI
Complete the following steps to create a ManagedClusterSetBinding
by using the CLI:
Create the
ManagedClusterSetBinding
resource in your YAML file.Note: When you create a managed cluster set binding, the name of the managed cluster set binding must match the name of the managed cluster set to bind. Your
ManagedClusterSetBinding
resource might resemble the following information:apiVersion: cluster.open-cluster-management.io/v1beta2 kind: ManagedClusterSetBinding metadata: namespace: <namespace> name: <cluster_set> spec: clusterSet: <cluster_set>
Ensure that you have the bind permission on the target managed cluster set. View the following example of a
ClusterRole
resource, which contains rules that allow the user to bind to<cluster_set>
:apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRole metadata: name: <clusterrole> rules: - apiGroups: ["cluster.open-cluster-management.io"] resources: ["managedclustersets/bind"] resourceNames: ["<cluster_set>"] verbs: ["create"]
1.7.13.4. Placing managed clusters by using taints and tolerations
You can control the placement of your managed clusters or managed cluster sets by using taints and tolerations. Taints and tolerations provide a way to prevent managed clusters from being selected for certain placements. This control can be helpful if you want to prevent certain managed clusters from being included in some placements. You can add a taint to the managed cluster, and add a toleration to the placement. If the taint and the toleration do not match, then the managed cluster is not selected for that placement.
1.7.13.4.1. Adding a taint to a managed cluster
Taints are specified in the properties of a managed cluster and allow a placement to repel a managed cluster or a set of managed clusters.
If the taints section does not exist, you can add a taint to a managed cluster by running a command that resembles the following example:
oc patch managedcluster <managed_cluster_name> -p '{"spec":{"taints":[{"key": "key", "value": "value", "effect": "NoSelect"}]}}' --type=merge
Alternatively, you can append a taint to existing taints by running a command similar to the following example:
oc patch managedcluster <managed_cluster_name> --type='json' -p='[{"op": "add", "path": "/spec/taints/-", "value": {"key": "key", "value": "value", "effect": "NoSelect"}}]'
The specification of a taint includes the following fields:
-
Required Key - The taint key that is applied to a cluster. This value must match the value in the toleration for the managed cluster to meet the criteria for being added to that placement. You can determine this value. For example, this value could be
bar
orfoo.example.com/bar
. -
Optional Value - The taint value for the taint key. This value must match the value in the toleration for the managed cluster to meet the criteria for being added to that placement. For example, this value could be
value
. Required Effect - The effect of the taint on placements that do not tolerate the taint, or what occurs when the taint and the toleration of the placement do not match. The value of the effects must be one of the following values:
-
NoSelect
- Placements are not allowed to select a cluster unless they tolerate this taint. If the cluster was selected by the placement before the taint was set, the cluster is removed from the placement decision. -
NoSelectIfNew
- The scheduler cannot select the cluster if it is a new cluster. Placements can only select the cluster if they tolerate the taint and already have the cluster in their cluster decisions.
-
-
Required
TimeAdded
- The time when the taint was added. This value is automatically set.
1.7.13.4.2. Identifying built-in taints to reflect the status of managed clusters
When a managed cluster is not accessible, you do not want the cluster added to a placement. The following taints are automatically added to managed clusters that are not accessible:
cluster.open-cluster-management.io/unavailable
- This taint is added to a managed cluster when the cluster has a condition ofManagedClusterConditionAvailable
with status ofFalse
. The taint has the effect ofNoSelect
and an empty value to prevent an unavailable cluster from being scheduled. An example of this taint is provided in the following content:apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: name: cluster1 spec: hubAcceptsClient: true taints: - effect: NoSelect key: cluster.open-cluster-management.io/unavailable timeAdded: '2022-02-21T08:11:54Z'
cluster.open-cluster-management.io/unreachable
- This taint is added to a managed cluster when the status of the condition forManagedClusterConditionAvailable
is eitherUnknown
or has no condition. The taint has effect ofNoSelect
and an empty value to prevent an unreachable cluster from being scheduled. An example of this taint is provided in the following content:apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: name: cluster1 spec: hubAcceptsClient: true taints: - effect: NoSelect key: cluster.open-cluster-management.io/unreachable timeAdded: '2022-02-21T08:11:06Z'
1.7.13.4.3. Adding a toleration to a placement
Tolerations are applied to placements, and allow the placements to repel managed clusters that do not have taints that match the tolerations of the placement. The specification of a toleration includes the following fields:
- Optional Key - The key matches the taint key to allow the placement.
- Optional Value - The value in the toleration must match the value of the taint for the toleration to allow the placement.
Optional Operator - The operator represents the relationship between a key and a value. Valid operators are
equal
andexists
. The default value isequal
. A toleration matches a taint when the keys are the same, the effects are the same, and the operator is one of the following values:-
equal
- The operator isequal
and the values are the same in the taint and the toleration. -
exists
- The wildcard for value, so a placement can tolerate all taints of a particular category.
-
-
Optional Effect - The taint effect to match. When left empty, it matches all taint effects. The allowed values when specified are
NoSelect
orNoSelectIfNew
. -
Optional TolerationSeconds - The length of time, in seconds, that the toleration tolerates the taint before moving the managed cluster to a new placement. If the effect value is not
NoSelect
orPreferNoSelect
, this field is ignored. The default value isnil
, which indicates that there is no time limit. The starting time of the counting of theTolerationSeconds
is automatically listed as theTimeAdded
value in the taint, rather than in the value of the cluster scheduled time or theTolerationSeconds
added time.
The following example shows how to configure a toleration that tolerates clusters that have taints:
Taint on the managed cluster for this example:
apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: name: cluster1 spec: hubAcceptsClient: true taints: - effect: NoSelect key: gpu value: "true" timeAdded: '2022-02-21T08:11:06Z'
Toleration on the placement that allows the taint to be tolerated
apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement1 namespace: default spec: tolerations: - key: gpu value: "true" operator: Equal
With the example tolerations defined,
cluster1
could be selected by the placement because thekey: gpu
andvalue: "true"
match.
Note: A managed cluster is not guaranteed to be placed on a placement that contains a toleration for the taint. If other placements contain the same toleration, the managed cluster might be placed on one of those placements.
1.7.13.4.4. Specifying a temporary toleration
The value of TolerationSeconds
specifies the period of time that the toleration tolerates the taint. This temporary toleration can be helpful when a managed cluster is offline and you can transfer applications that are deployed on this cluster to another managed cluster for a tolerated time.
For example, the managed cluster with the following taint becomes unreachable:
apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: name: cluster1 spec: hubAcceptsClient: true taints: - effect: NoSelect key: cluster.open-cluster-management.io/unreachable timeAdded: '2022-02-21T08:11:06Z'
If you define a placement with a value for TolerationSeconds
, as in the following example, the workload transfers to another available managed cluster after 5 minutes.
apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: demo4 namespace: demo1 spec: tolerations: - key: cluster.open-cluster-management.io/unreachable operator: Exists tolerationSeconds: 300
The application is moved to another managed cluster after the managed cluster is unreachable for 5 minutes.
1.7.13.4.5. Additional resources
- To learn more about taints and tolerations, see Using taints and tolerations to control logging pod placement in the OpenShift Container Platform documentation.
-
To learn how to use
oc patch
, see oc patch the OpenShift Container Platform documentation
1.7.13.5. Removing a managed cluster from a ManagedClusterSet
You might want to remove a managed cluster from a managed cluster set to move it to a different managed cluster set, or remove it from the management settings of the set. You can remove a managed cluster from a managed cluster set by using the console or the CLI.
Notes:
-
Every managed cluster must be assigned to a managed cluster set. If you remove a managed cluster from a
ManagedClusterSet
and do not assign it to a differentManagedClusterSet
, the cluster is automatically added to thedefault
managed cluster set. -
If the Submariner add-on is installed on your managed cluster, you must uninstall the add-on before removing your managed cluster from a
ManagedClusterSet
.
1.7.13.5.1. Removing a cluster from a ManagedClusterSet by using the console
Complete the following steps to remove a cluster from a managed cluster set by using the console:
- Click Infrastructure > Clusters and ensure that the Cluster sets tab is selected.
- Select the name of the cluster set that you want to remove from the managed cluster set to view the cluster set details.
- Select Actions > Manage resource assignments.
On the Manage resource assignments page, remove the checkbox for the resources that you want to remove from the cluster set.
This step removes a resource that is already a member of the cluster set. You can see if the resource is already a member of a cluster set by viewing the details of the managed cluster.
Note: If you are moving a managed cluster from one managed cluster set to another, you must have the required RBAC permissions on both managed cluster sets.
1.7.13.5.2. Removing a cluster from a ManagedClusterSet by using the CLI
To remove a cluster from a managed cluster set by using the command line, complete the following steps:
Run the following command to display a list of managed clusters in the managed cluster set:
oc get managedclusters -l cluster.open-cluster-management.io/clusterset=<cluster_set>
Replace
cluster_set
with the name of the managed cluster set.- Locate the entry for the cluster that you want to remove.
Remove the label from the YAML entry for the cluster that you want to remove. See the following code for an example of the label:
labels: cluster.open-cluster-management.io/clusterset: clusterset1
Note: If you are moving a managed cluster from one cluster set to another, you must have the required RBAC permission on both managed cluster sets.
1.7.14. Placement
A placement resource is a namespace-scoped resource that defines a rule to select a set of ManagedClusters
from the ManagedClusterSets
, which are bound to the placement namespace.
Required access: Cluster administrator, Cluster set administrator
Continue reading to learn more about how to use placements:
1.7.14.1. Placement overview
See the following information about how placement with managed clusters works:
-
Kubernetes clusters are registered with the hub cluster as cluster-scoped
ManagedClusters
. -
The
ManagedClusters
are organized into cluster-scopedManagedClusterSets
. -
The
ManagedClusterSets
are bound to workload namespaces. -
The namespace-scoped placements specify a portion of
ManagedClusterSets
that select a working set of the potentialManagedClusters
. -
Placements filter
ManagedClusters
fromManagedClusterSets
by usinglabelSelector
andclaimSelector
. -
The placement of
ManagedClusters
can be controlled by using taints and tolerations. - Placements rank the clusters by the requirements and select a subset of clusters from them.
- Placements do not select managed clusters that you are deleting.
Notes:
-
You must bind at least one
ManagedClusterSet
to a namespace by creating aManagedClusterSetBinding
in that namespace. -
You must have role-based access to
CREATE
on the virtual sub-resource ofmanagedclustersets/bind
.
1.7.14.1.1. Additional resources
- See Using taints and tolerations to place managed clusters for more information.
- See Placements API to learn more about the API.
- Return to Selecting ManagedClusters with placement.
1.7.14.2. Filtering ManagedClusters from ManagedClusterSets
You can select which ManagedClusters
to filter by using labelSelector
or claimSelector
. See the following examples to learn how to use both filters:
In the following example, the
labelSelector
only matches clusters with the labelvendor: OpenShift
:apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement namespace: ns1 spec: predicates: - requiredClusterSelector: labelSelector: matchLabels: vendor: OpenShift
In the following example,
claimSelector
only matches clusters withregion.open-cluster-management.io
withus-west-1
:apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement namespace: ns1 spec: predicates: - requiredClusterSelector: claimSelector: matchExpressions: - key: region.open-cluster-management.io operator: In values: - us-west-1
You can also filter
ManagedClusters
from particular cluster sets by using theclusterSets
parameter. In the following example,claimSelector
only matches the cluster setsclusterset1
andclusterset2
:apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement namespace: ns1 spec: clusterSets: - clusterset1 - clusterset2 predicates: - requiredClusterSelector: claimSelector: matchExpressions: - key: region.open-cluster-management.io operator: In values: - us-west-1
You can also choose how many ManagedClusters
you want to filter by using the numberOfClusters
paremeter. See the following example:
apiVersion: cluster.open-cluster-management.io/v1beta1
kind: Placement
metadata:
name: placement
namespace: ns1
spec:
numberOfClusters: 3 1
predicates:
- requiredClusterSelector:
labelSelector:
matchLabels:
vendor: OpenShift
claimSelector:
matchExpressions:
- key: region.open-cluster-management.io
operator: In
values:
- us-west-1
- 1
- Specify how many
ManagedClusters
you want to select. The previous example is set to3
.
1.7.14.2.1. Filtering ManagedClusters by defining tolerations with placement
To learn how to filter ManagedClusters
with matching taints, see the following examples:
By default, the placement cannot select
cluster1
in the following example:apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: name: cluster1 spec: hubAcceptsClient: true taints: - effect: NoSelect key: gpu value: "true" timeAdded: '2022-02-21T08:11:06Z'
To select
cluster1
you must define tolerations. See the following example:apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement namespace: ns1 spec: tolerations: - key: gpu value: "true" operator: Equal
You can also select ManagedClusters
with matching taints for a specified amount of time by using the tolerationSeconds
parameter. tolerationSeconds
defines how long a toleration stays bound to a taint. tolerationSeconds
can automatically transfer applications that are deployed on a cluster that goes offline to another managed cluster after a specified length of time.
Learn how to use tolerationSeconds
by viewing the following examples:
In the following example, the managed cluster becomes unreachable:
apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: name: cluster1 spec: hubAcceptsClient: true taints: - effect: NoSelect key: cluster.open-cluster-management.io/unreachable timeAdded: '2022-02-21T08:11:06Z'
If you define a placement with
tolerationSeconds
, the workload is transferred to another available managed cluster. See the following example:apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement namespace: ns1 spec: tolerations: - key: cluster.open-cluster-management.io/unreachable operator: Exists tolerationSeconds: 300 1
- 1
- Specify after how many seconds you want the workload to be transferred.
1.7.14.2.2. Prioritizing ManagedClusters by defining prioritizerPolicy with placement
View the following examples to learn how to prioritize ManagedClusters
by using the prioritizerPolicy
parameter with placement.
The following example selects a cluster with the largest allocatable memory:
Note: Similar to Kubernetes Node Allocatable, 'allocatable' is defined as the amount of compute resources that are available for pods on each cluster.
apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement namespace: ns1 spec: numberOfClusters: 1 prioritizerPolicy: configurations: - scoreCoordinate: builtIn: ResourceAllocatableMemory
The following example selects a cluster with the largest allocatable CPU and memory, and makes placement sensitive to resource changes:
apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement namespace: ns1 spec: numberOfClusters: 1 prioritizerPolicy: configurations: - scoreCoordinate: builtIn: ResourceAllocatableCPU weight: 2 - scoreCoordinate: builtIn: ResourceAllocatableMemory weight: 2
The following example selects two clusters with the largest
addOn
score CPU ratio, and pins the placement decisions:apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement namespace: ns1 spec: numberOfClusters: 2 prioritizerPolicy: mode: Exact configurations: - scoreCoordinate: builtIn: Steady weight: 3 - scoreCoordinate: type: AddOn addOn: resourceName: default scoreName: cpuratio
1.7.14.2.3. Filtering ManagedClusters based on add-on status
You might want to select managed clusters for your placements based on the status of the add-ons that are deployed on them. For example, you can select a managed cluster for your placement only if there is a specific add-on that is enabled on the managed cluster.
You can specify the label for the add-on, as well as its status, when you create the placement. A label is automatically created on a ManagedCluster
resource if an add-on is enabled on the managed cluster. The label is automatically removed if the add-on is disabled.
Each add-on is represented by a label in the format of feature.open-cluster-management.io/addon-<addon_name>=<status_of_addon>
.
Replace addon_name
with the name of the add-on that you want to enable on the selected managed cluster.
Replace status_of_addon
with the status that you want the add-on to have if the managed cluster is selected.
See the following table of possible value for status_of_addon
:
Value | Description |
---|---|
| The add-on is enabled and available. |
| The add-on is enabled, but the lease is not updated continuously. |
| The add-on is enabled, but there is no lease found for it. This can also be caused when the managed cluster is offline. |
For example, an available application-manager
add-on is represented by a label on the managed cluster that reads the following:
feature.open-cluster-management.io/addon-application-manager: available
See the following examples to learn how to create placements based on add-ons and their status:
The following placement example includes all managed clusters that have
application-manager
enabled on them:apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement1 namespace: ns1 spec: predicates: - requiredClusterSelector: labelSelector: matchExpressions: - key: feature.open-cluster-management.io/addon-application-manager operator: Exists
The following placement example includes all managed clusters that have
application-manager
enabled with anavailable
status:apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement2 namespace: ns1 spec: predicates: - requiredClusterSelector: labelSelector: matchLabels: "feature.open-cluster-management.io/addon-application-manager": "available"
The following placement example includes all managed clusters that have
application-manager
disabled:apiVersion: cluster.open-cluster-management.io/v1beta1 kind: Placement metadata: name: placement3 namespace: ns1 spec: predicates: - requiredClusterSelector: labelSelector: matchExpressions: - key: feature.open-cluster-management.io/addon-application-manager operator: DoesNotExist
1.7.14.2.4. Additional resources
- See Node Allocatable for more details.
- Return to Selecting ManagedClusters with placement for other topics.
1.7.14.3. Checking selected ManagedClusters by using PlacementDecisions
One or more PlacementDecision
kinds with the label cluster.open-cluster-management.io/placement={placement_name}
are created to represent ManagedClusters
selected by a placement.
If a ManagedCluster
is selected and added to a PlacementDecision
, components that consume this placement might apply the workload on this ManagedCluster
. After the ManagedCluster
is no longer selected and is removed from the PlacementDecision
, the workload that is applied on this ManagedCluster
is removed. See PlacementDecisions API to learn more about the API.
See the following PlacementDecision
example:
apiVersion: cluster.open-cluster-management.io/v1beta1 kind: PlacementDecision metadata: labels: cluster.open-cluster-management.io/placement: placement1 name: placement1-kbc7q namespace: ns1 ownerReferences: - apiVersion: cluster.open-cluster-management.io/v1beta1 blockOwnerDeletion: true controller: true kind: Placement name: placement1 uid: 05441cf6-2543-4ecc-8389-1079b42fe63e status: decisions: - clusterName: cluster1 reason: '' - clusterName: cluster2 reason: '' - clusterName: cluster3 reason: ''
1.7.14.3.1. Additional resources
- See PlacementDecisions API fore more details.
1.7.15. Managing cluster pools (Technology Preview)
Cluster pools provide rapid and cost-effective access to configured Red Hat OpenShift Container Platform clusters on-demand and at scale. Cluster pools provision a configurable and scalable number of OpenShift Container Platform clusters on Amazon Web Services, Google Cloud Platform, or Microsoft Azure that can be claimed when they are needed. They are especially useful when providing or replacing cluster environments for development, continuous integration, and production scenarios. You can specify a number of clusters to keep running so that they are available to be claimed immediately, while the remainder of the clusters will be kept in a hibernating state so that they can be resumed and claimed within a few minutes.
ClusterClaim
resources are used to check out clusters from cluster pools. When a cluster claim is created, the pool assigns a running cluster to it. If no running clusters are available, a hibernating cluster is resumed to provide the cluster or a new cluster is provisioned. The cluster pool automatically creates new clusters and resumes hibernating clusters to maintain the specified size and number of available running clusters in the pool.
The procedure for creating a cluster pool is similar to the procedure for creating a cluster. Clusters in a cluster pool are not created for immediate use.
1.7.15.1. Creating a cluster pool
The procedure for creating a cluster pool is similar to the procedure for creating a cluster. Clusters in a cluster pool are not created for immediate use.
Required access: Administrator
1.7.15.1.1. Prerequisites
See the following prerequisites before creating a cluster pool:
- You need to deploy a multicluster engine operator hub cluster.
- You need Internet access for your multicluster engine operator hub cluster so that it can create the Kubernetes cluster on the provider environment.
- You need an AWS, GCP, or Microsoft Azure provider credential. See Managing credentials overview for more information.
- You need a configured domain in your provider environment. See your provider documentation for instructions about how to configure a domain.
- You need provider login credentials.
- You need your OpenShift Container Platform image pull secret. See Using image pull secrets.
Note: Adding a cluster pool with this procedure configures it so it automatically imports the cluster for multicluster engine operator management when you claim a cluster from the pool. If you want to create a cluster pool that does not automatically import the claimed cluster for management with the cluster claim, add the following annotation to your clusterClaim
resource:
kind: ClusterClaim
metadata:
annotations:
cluster.open-cluster-management.io/createmanagedcluster: "false" 1
- 1
- The word
"false"
must be surrounded by quotation marks to indicate that it is a string.
1.7.15.1.2. Create the cluster pool
To create a cluster pool, select Infrastructure > Clusters in the navigation menu. The Cluster pools tab lists the cluster pools that you can access. Select Create cluster pool and complete the steps in the console.
If you do not have a infrastructure credential that you want to use for the cluster pool, you can create one by selecting Add credential.
You can either select an existing namespace from the list, or type the name of a new one to create one. The cluster pool does not have to be in the same namespace as the clusters.
You can select a cluster set name if you want the RBAC roles for your cluster pool to share the role assignments of an existing cluster set. The cluster set for the clusters in the cluster pool can only be set when you create the cluster pool. You cannot change the cluster set association for the cluster pool or for the clusters in the cluster pool after you create the cluster pool. Any cluster that you claim from the cluster pool is automatically added to the same cluster set as the cluster pool.
Note: If you do not have cluster admin
permissions, you must select a cluster set. The request to create a cluster set is rejected with a forbidden error if you do not include the cluster set name in this situation. If no cluster sets are available for you to select, contact your cluster administrator to create a cluster set and give you clusterset admin
permissions to it.
The cluster pool size
specifies the number of clusters that you want provisioned in your cluster pool, while the cluster pool running count specifies the number of clusters that the pool keeps running and ready to claim for immediate use.
The procedure is very similar to the procedure for creating clusters.
For specific information about the information that is required for your provider, see the following information:
1.7.15.2. Claiming clusters from cluster pools
ClusterClaim
resources are used to check out clusters from cluster pools. A claim is completed when a cluster is running and ready in the cluster pool. The cluster pool automatically creates new running and hibernated clusters in the cluster pool to maintain the requirements that are specified for the cluster pool.
Note: When a cluster that was claimed from the cluster pool is no longer needed and is destroyed, the resources are deleted. The cluster does not return to the cluster pool.
Required access: Administrator
1.7.15.2.1. Prerequisite
You must have the following available before claiming a cluster from a cluster pool:
A cluster pool with or without available clusters. If there are available clusters in the cluster pool, the available clusters are claimed. If there are no available clusters in the cluster pool, a cluster is created to fulfill the claim. See Creating a cluster pool for information about how to create a cluster pool.
1.7.15.2.2. Claim the cluster from the cluster pool
When you create a cluster claim, you request a new cluster from the cluster pool. A cluster is checked out from the pool when a cluster is available. The claimed cluster is automatically imported as one of your managed clusters, unless you disabled automatic import.
Complete the following steps to claim a cluster:
- From the navigation menu, click Infrastructure > Clusters, and select the Cluster pools tab.
- Find the name of the cluster pool you want to claim a cluster from and select Claim cluster.
If a cluster is available, it is claimed and immediately appears in the Managed clusters tab. If there are no available clusters, it might take several minutes to resume a hibernated cluster or provision a new cluster. During this time, the claim status is pending
. Expand the cluster pool to view or delete pending claims against it.
The claimed cluster remains a member of the cluster set that it was associated with when it was in the cluster pool. You cannot change the cluster set of the claimed cluster when you claim it.
Note: Changes to the pull secret, SSH keys, or base domain of the cloud provider credentials are not reflected for existing clusters that are claimed from a cluster pool, as they have already been provisioned using the original credentials. You cannot edit cluster pool information by using the console, but you can update it by updating its information using the CLI interface. You can also create a new cluster pool with a credential that contains the updated information. The clusters that are created in the new pool use the settings provided in the new credential.
1.7.15.3. Updating the cluster pool release image
When the clusters in your cluster pool remain in hibernation for some time, the Red Hat OpenShift Container Platform release image of the clusters might become backlevel. If this happens, you can upgrade the version of the release image of the clusters that are in your cluster pool.
Required access: Edit
Complete the following steps to update the OpenShift Container Platform release image for the clusters in your cluster pool:
Note: This procedure does not update clusters from the cluster pool that are already claimed in the cluster pool. After you complete this procedure, the updates to the release images only apply to the following clusters that are related to the cluster pool:
- Clusters that are created by the cluster pool after updating the release image with this procedure.
- Clusters that are hibernating in the cluster pool. The existing hibernating clusters with the old release image are destroyed, and new clusters with the new release image replace them.
- From the navigation menu, click Infrastructure > Clusters.
- Select the Cluster pools tab.
- Find the name of the cluster pool that you want to update in the Cluster pools table.
- Click the Options menu for the Cluster pools in the table, and select Update release image.
- Select a new release image to use for future cluster creations from this cluster pool.
The cluster pool release image is updated.
Tip: You can update the release image for multiple cluster pools with one action by selecting the box for each of the cluster pools and using the Actions menu to update the release image for the selected cluster pools.
1.7.15.4. Scaling cluster pools (Technology Preview)
You can change the number of clusters in the cluster pool by increasing or decreasing the number of clusters in the cluster pool size.
Required access: Cluster administrator
Complete the following steps to change the number of clusters in your cluster pool:
- From the navigation menu, click Infrastructure > Clusters.
- Select the Cluster pools tab.
- In the Options menu for the cluster pool that you want to change, select Scale cluster pool.
- Change the value of the pool size.
- Optionally, you can update the number of running clusters to increase or decrease the number of clusters that are immediately available when you claim them.
Your cluster pools are scaled to reflect your new values.
1.7.15.5. Destroying a cluster pool
If you created a cluster pool and determine that you no longer need it, you can destroy the cluster pool.
Important: You can only destroy cluster pools that do not have any cluster claims.
Required access: Cluster administrator
To destroy a cluster pool, complete the following steps:
- From the navigation menu, click Infrastructure > Clusters.
- Select the Cluster pools tab.
In the Options menu for the cluster pool that you want to delete, type
confirm
in the confirmation box and select Destroy.Notes:
- The Destroy button is disabled if the cluster pool has any cluster claims.
- The namespace that contains the cluster pool is not deleted. Deleting the namespace destroys any clusters that have been claimed from the cluster pool, since the cluster claim resources for these clusters are created in the same namespace.
Tip: You can destroy multiple cluster pools with one action by selecting the box for each of the cluster pools and using the Actions menu to destroy the selected cluster pools.
1.7.16. Enabling ManagedServiceAccount add-ons
When you install a supported version of multicluster engine operator, the ManagedServiceAccount
add-on is enabled by default.
Important: If you upgraded your hub cluster from multicluster engine operator version 2.4 and did not enable the ManagedServiceAccount
add-on before upgrading, you must enable the add-on manually.
The ManagedServiceAccount
allows you to create or delete a service account on a managed cluster.
Required access: Editor
When a ManagedServiceAccount
custom resource is created in the <managed_cluster>
namespace on the hub cluster, a ServiceAccount
is created on the managed cluster.
A TokenRequest
is made with the ServiceAccount
on the managed cluster to the Kubernetes API server on the managed cluster. The token is then stored in a Secret
in the <target_managed_cluster>
namespace on the hub cluster.
Note: The token can expire and be rotated. See TokenRequest for more information about token requests.
1.7.16.1. Prerequisites
- You need a supported Red Hat OpenShift Container Platform environment.
- You need the multicluster engine operator installed.
1.7.16.2. Enabling ManagedServiceAccount
To enable a ManagedServiceAccount
add-on for a hub cluster and a managed cluster, complete the following steps:
-
Enable the
ManagedServiceAccount
add-on on hub cluster. See Advanced configuration to learn more. Deploy the
ManagedServiceAccount
add-on and apply it to your target managed cluster. Create the following YAML file and replacetarget_managed_cluster
with the name of the managed cluster where you are applying theManaged-ServiceAccount
add-on:apiVersion: addon.open-cluster-management.io/v1alpha1 kind: ManagedClusterAddOn metadata: name: managed-serviceaccount namespace: <target_managed_cluster> spec: installNamespace: open-cluster-management-agent-addon
Run the following command to apply the file:
oc apply -f -
You have now enabled the
ManagedServiceAccount
plug-in for your managed cluster. See the following steps to configure aManagedServiceAccount
.Create a
ManagedServiceAccount
custom resource with the following YAML source:apiVersion: authentication.open-cluster-management.io/v1alpha1 kind: ManagedServiceAccount metadata: name: <managedserviceaccount_name> namespace: <target_managed_cluster> spec: rotation: {}
-
Replace
managed_serviceaccount_name
with the name of yourManagedServiceAccount
. -
Replace
target_managed_cluster
with the name of the managed cluster to which you are applying theManagedServiceAccount
.
-
Replace
To verify, view the
tokenSecretRef
attribute in theManagedServiceAccount
object status to find the secret name and namespace. Run the following command with your account and cluster name:oc get managedserviceaccount <managed_serviceaccount_name> -n <target_managed_cluster> -o yaml
View the
Secret
containing the retrieved token that is connected to the createdServiceAccount
on the managed cluster. Run the following command:oc get secret <managed_serviceaccount_name> -n <target_managed_cluster> -o yaml
1.7.17. Cluster lifecycle advanced configuration
You can configure some cluster settings during or after installation.
1.7.17.1. Customizing API server certificates
The managed clusters communicate with the hub cluster through a mutual connection with the OpenShift Kube API server external load balancer. The default OpenShift Kube API server certificate is issued by an internal Red Hat OpenShift Container Platform cluster certificate authority (CA) when OpenShift Container Platform is installed. If necessary, you can add or change certificates.
Changing the API server certificate might impact the communication between the managed cluster and the hub cluster. When you add the named certificate before installing the product, you can avoid an issue that might leave your managed clusters in an offline state.
The following list contains some examples of when you might need to update your certificates:
You want to replace the default API server certificate for the external load balancer with your own certificate. By following the guidance in Adding API server certificates in the OpenShift Container Platform documentation, you can add a named certificate with host name
api.<cluster_name>.<base_domain>
to replace the default API server certificate for the external load balancer. Replacing the certificate might cause some of your managed clusters to move to an offline state. If your clusters are in an offline state after upgrading the certificates, follow the troubleshooting instructions for Troubleshooting imported clusters offline after certificate change to resolve it.Note: Adding the named certificate before installing the product helps to avoid your clusters moving to an offline state.
The named certificate for the external load balancer is expiring and you need to replace it. If both the old and the new certificate share the same root CA certificate, despite the number of intermediate certificates, you can follow the guidance in Adding API server certificates in the OpenShift Container Platform documentation to create a new secret for the new certificate. Then update the serving certificate reference for host name
api.<cluster_name>.<base_domain>
to the new secret in theAPIServer
custom resource. Otherwise, when the old and new certificates have different root CA certificates, complete the following steps to replace the certificate:Locate your
APIServer
custom resource, which resembles the following example:apiVersion: config.openshift.io/v1 kind: APIServer metadata: name: cluster spec: audit: profile: Default servingCerts: namedCertificates: - names: - api.mycluster.example.com servingCertificate: name: old-cert-secret
Create a new secret in the
openshift-config
namespace that contains the content of the existing and new certificates by running the following commands:Copy the old certificate into a new certificate:
cp old.crt combined.crt
Add the contents of the new certificate to the copy of the old certificate:
cat new.crt >> combined.crt
Apply the combined certificates to create a secret:
oc create secret tls combined-certs-secret --cert=combined.crt --key=old.key -n openshift-config
Update your
APIServer
resource to reference the combined certificate as theservingCertificate
.apiVersion: config.openshift.io/v1 kind: APIServer metadata: name: cluster spec: audit: profile: Default servingCerts: namedCertificates: - names: - api.mycluster.example.com servingCertificate: name: combined-cert-secret
- After about 15 minutes, the CA bundle containing both new and old certificates is propagated to the managed clusters.
Create another secret named
new-cert-secret
in theopenshift-config
namespace that contains only the new certificate information by entering the following command:oc create secret tls new-cert-secret --cert=new.crt --key=new.key -n openshift-config {code}
Update the
APIServer
resource by changing the name ofservingCertificate
to reference thenew-cert-secret
. Your resource might resemble the following example:apiVersion: config.openshift.io/v1 kind: APIServer metadata: name: cluster spec: audit: profile: Default servingCerts: namedCertificates: - names: - api.mycluster.example.com servingCertificate: name: new-cert-secret
After about 15 minutes, the old certificate is removed from the CA bundle, and the change is automatically propagated to the managed clusters.
Note: Managed clusters must use the host name api.<cluster_name>.<base_domain>
to access the hub cluster. You cannot use named certificates that are configured with other host names.
1.7.17.2. Configuring the proxy between hub cluster and managed cluster
To register a managed cluster to your multicluster engine for Kubernetes operator hub cluster, you need to transport the managed cluster to your multicluster engine operator hub cluster. Sometimes your managed cluster cannot directly reach your multicluster engine operator hub cluster. In this instance, configure the proxy settings to allow the communications from the managed cluster to access the multicluster engine operator hub cluster through a HTTP or HTTPS proxy server.
For example, the multicluster engine operator hub cluster is in a public cloud, and the managed cluster is in a private cloud environment behind firewalls. The communications out of the private cloud can only go through a HTTP or HTTPS proxy server.
1.7.17.2.1. Prerequisites
- You have a HTTP or HTTPS proxy server running that supports HTTP tunnels. For example, HTTP connect method.
- You have a manged cluster that can reach the HTTP or HTTPS proxy server, and the proxy server can access the multicluster engine operator hub cluster.
Complete the following steps to configure the proxy settings between hub cluster and managed cluster:
Create a
KlusterConfig
resource with proxy settings.See the following configuration with HTTP proxy:
apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: http-proxy spec: hubKubeAPIServerConfig: proxyURL: "http://<username>:<password>@<ip>:<port>"
See the following configuration with HTTPS proxy:
apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: https-proxy spec: hubKubeAPIServerConfig: proxyURL: "https://<username>:<password>@<ip>:<port>" trustedCABundles: - name: "proxy-ca-bundle" caBundle: name: <configmap-name> namespace: <configmap-namespace>
Note: A CA bundle is required for HTTPS proxy. It refers to a ConfigMap containing one or multiple CA certificates. You can create the ConfigMap by running the following command:
oc create -n <configmap-namespace> configmap <configmap-name> --from-file=ca.crt=/path/to/ca/file
When creating a managed cluster, choose the
KlusterletConfig
resource by adding an annotation that refers to theKlusterletConfig
resource. See the following example:apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: annotations: agent.open-cluster-management.io/klusterlet-config: <klusterlet-config-name> name:<managed-cluster-name> spec: hubAcceptsClient: true leaseDurationSeconds: 60
Notes:
-
You might need to toggle the YAML view to add the annotation to the
ManagedCluster
resource when you operate on the multicluster engine operator console. -
You can use a global
KlusterletConfig
to enable the configuration on every managed cluster without using an annotation for binding.
-
You might need to toggle the YAML view to add the annotation to the
1.7.17.2.2. Disabling the proxy between hub cluster and managed cluster
If your development changes, you might need to disable the HTTP or HTTPS proxy.
-
Go to the
ManagedCluster
resource. -
Remove the
agent.open-cluster-management.io/klusterlet-config
annotation.
1.7.17.2.3. Optional: Configuring the klusterlet to run on specific nodes
When you create a cluster using Red Hat Advanced Cluster Management for Kubernetes, you can specify which nodes you want to run the managed cluster klusterlet to run on by configuring the nodeSelector
and tolerations
annotation for the managed cluster. Complete the following steps to configure these settings:
- Select the managed cluster that you want to update from the clusters page in the console.
Set the YAML switch to
On
to view the YAML content.Note: The YAML editor is only available when importing or creating a cluster. To edit the managed cluster YAML definition after importing or creating, you must use the OpenShift Container Platform command-line interface or the Red Hat Advanced Cluster Management search feature.
-
Add the
nodeSelector
annotation to the managed cluster YAML definition. The key for this annotation is:open-cluster-management/nodeSelector
. The value of this annotation is a string map with JSON formatting. Add the
tolerations
entry to the managed cluster YAML definition. The key of this annotation is:open-cluster-management/tolerations
. The value of this annotation represents a toleration list with JSON formatting. The resulting YAML might resemble the following example:apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: annotations: open-cluster-management/nodeSelector: '{"dedicated":"acm"}' open-cluster-management/tolerations: '[{"key":"dedicated","operator":"Equal","value":"acm","effect":"NoSchedule"}]'
- To make sure your content is deployed to the correct nodes, complete the steps in Configuring nodeSelectors and tolerations for klusterlet add-ons.
1.7.17.3. Customizing the server URL and CA bundle of the hub cluster API server when importing a managed cluster (Technology Preview)
You might not be able to register a managed cluster on your multicluster engine operator hub cluster if intermediate components exist between the managed cluster and the hub cluster. Example intermediate components include a Virtual IP, load balancer, reverse proxy, or API gateway. If you have an intermediate component, you must use a custom server URL and CA bundle for the hub cluster API server when importing a managed cluster.
1.7.17.3.1. Prerequisites
- You must configure the intermediate component so that the hub cluster API server is accessible for the managed cluster.
If the intermediate component terminates the SSL connections between the managed cluster and hub cluster API server, you must bridge the SSL connections and pass the authentication information from the original requests to the back end of the hub cluster API server. You can use the User Impersonation feature of the Kubernetes API server to bridge the SSL connections.
The intermediate component extracts the client certificate from the original requests, adds Common Name (CN) and Organization (O) of the certificate subject as impersonation headers, and then forwards the modified impersonation requests to the back end of the hub cluster API server.
Note: If you bridge the SSL connections, the cluster proxy add-on does not work.
1.7.17.3.2. Customizing the server URL and hub cluster CA bundle
To use a custom hub API server URL and CA bundle when importing a managed cluster, complete the following steps:
Create a
KlusterConfig
resource with the custom hub cluster API server URL and CA bundle. See the following example:apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: <name> 1 spec: hubKubeAPIServerConfig: url: "https://api.example.com:6443" 2 serverVerificationStrategy: UseCustomCABundles trustedCABundles: - name: <custom-ca-bundle> 3 caBundle: name: <custom-ca-bundle-configmap> 4 namespace: <multicluster-engine> 5
- 1
- Add your klusterlet config name.
- 2
- Add your custom server URL.
- 3
- Add your custom CA bundle name. You can use any value except
auto-detected
, which is reserved for internal use. - 4
- Add your name of the CA bundle ConfigMap. You can create the ConfigMap by running the following command:
oc create -n <configmap-namespace> configmap <configmap-name> --from-file=ca.crt=/path/to/ca/file
- 5
- Add your namespace of the CA bundle ConfigMap.
Select the
KlusterletConfig
resource when creating a managed cluster by adding an annotation that refers to the resource. See the following example:apiVersion: cluster.open-cluster-management.io/v1 kind: ManagedCluster metadata: annotations: agent.open-cluster-management.io/klusterlet-config: 1 name: 2 spec: hubAcceptsClient: true leaseDurationSeconds: 60
Notes:
-
If you use the console, you might need to enable the YAML view to add the annotation to the
ManagedCluster
resource. -
You can use a global
KlusterletConfig
to enable the configuration on every managed cluster without using an annotation for binding.
-
If you use the console, you might need to enable the YAML view to add the annotation to the
1.7.17.3.3. Configuring the global KlusterletConfig
If you create a KlusterletConfig
resource and set the name to global
, the configurations in the global KlusterletConfig
are automatically applied on every managed cluster.
In an environment that has a global KlusterletConfig
, you can also create a cluster-specific KlusterletConfig
and bind it with a managed cluster by adding the agent.open-cluster-management.io/klusterlet-config: <klusterletconfig-name>
annotation to the ManagedCluster resource
. The value of the cluster-specific KlusterletConfig
overrides the global KlusterletConfig
value if you set different values for the same field.
See the following example where the hubKubeAPIServerURL
field has different values set in your KlusterletConfig
and the global KlusterletConfig
. The "https://api.example.test.com:6443" value overrides the "https://api.example.global.com:6443" value:
Deprecation: The hubKubeAPIServerURL
field is deprecated. See API deprecations to learn more.
apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: test spec: hubKubeAPIServerConfig: url: "https://api.example.test.com:6443" --- apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: global spec: hubKubeAPIServerConfig: url: "https://api.example.global.com:6443"
The value of the global KlusterletConfig
is used if there is no cluster-specific KlusterletConfig
bound to a managed cluster, or the same field is missing or does not have a value in the cluster-specific KlusterletConfig
.
See the following example, where the "example.global.com"
value in the hubKubeAPIServerURL
field of the global KlusterletConfig
overrides your KlusterletConfig
:
apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: test spec: hubKubeAPIServerURL: "" — apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: global spec: hubKubeAPIServerURL: "example.global.com"
See the following example, where the "example.global.com"
value in the hubKubeAPIServerURL
field of the global KlusterletConfig
also overrides your KlusterletConfig
:
apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: test — apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: global spec: hubKubeAPIServerURL: "example.global.com"
1.7.17.4. Additional resources
1.7.18. Removing a cluster from management
When you remove an OpenShift Container Platform cluster from management that was created with multicluster engine operator, you can either detach it or destroy it. Detaching a cluster removes it from management, but does not completely delete it. You can import it again if you want to manage it. This is only an option when the cluster is in a Ready state.
The following procedures remove a cluster from management in either of the following situations:
- You already deleted the cluster and want to remove the deleted cluster from Red Hat Advanced Cluster Management.
- You want to remove the cluster from management, but have not deleted the cluster.
Important:
- Destroying a cluster removes it from management and deletes the components of the cluster.
When you detach or destroy a managed cluster, the related namespace is automatically deleted. Do not place custom resources in this namespace.
1.7.18.1. Removing a cluster by using the console
From the navigation menu, navigate to Infrastructure > Clusters and select Destroy cluster or Detach cluster from the options menu beside the cluster that you want to remove from management.
Tip: You can detach or destroy multiple clusters by selecting the check boxes of the clusters that you want to detach or destroy and selecting Detach or Destroy.
Note: If you attempt to detach the hub cluster while it is managed, which is called a local-cluster
, check to see if the default setting of disableHubSelfManagement
is false
. This setting causes the hub cluster to reimport itself and manage itself when it is detached, and it reconciles the MultiClusterHub
controller. It might take hours for the hub cluster to complete the detachment process and reimport.
To reimport the hub cluster without waiting for the processes to finish, you can enter the following command to restart the multiclusterhub-operator
pod and reimport faster:
oc delete po -n open-cluster-management `oc get pod -n open-cluster-management | grep multiclusterhub-operator| cut -d' ' -f1`
You can change the value of the hub cluster to not import automatically by changing the disableHubSelfManagement
value to true
, as described in Installing while connected online.
1.7.18.2. Removing a cluster by using the command line
To detach a managed cluster by using the command line of the hub cluster, run the following command:
oc delete managedcluster $CLUSTER_NAME
To destroy the managed cluster after detaching, run the following command:
oc delete clusterdeployment <CLUSTER_NAME> -n $CLUSTER_NAME
Notes:
-
To prevent destroying the managed cluster, set the
spec.preserveOnDelete
parameter totrue
in theClusterDeployment
custom resource. The default setting of
disableHubSelfManagement
isfalse
. Thefalse`setting causes the hub cluster, also called `local-cluster
, to reimport and manage itself when it is detached and it reconciles theMultiClusterHub
controller.The detachment and reimport process might take hours might take hours for the hub cluster to complete. If you want to reimport the hub cluster without waiting for the processes to finish, you can enter the following command to restart the
multiclusterhub-operator
pod and reimport faster:oc delete po -n open-cluster-management `oc get pod -n open-cluster-management | grep multiclusterhub-operator| cut -d' ' -f1`
You can change the value of the hub cluster to not import automatically by changing the
disableHubSelfManagement
value totrue
. See Installing while connected online.
1.7.18.3. Removing remaining resources after removing a cluster
If there are remaining resources on the managed cluster that you removed, there are additional steps that are required to ensure that you remove all of the remaining components. Situations when these extra steps are required include the following examples:
-
The managed cluster was detached before it was completely created, and components like the
klusterlet
remain on the managed cluster. - The hub that was managing the cluster was lost or destroyed before detaching the managed cluster, and there is no way to detach the managed cluster from the hub.
- The managed cluster was not in an online state when it was detached.
If one of these situations apply to your attempted detachment of a managed cluster, there are some resources that cannot be removed from managed cluster. Complete the following steps to detach the managed cluster:
-
Make sure you have the
oc
command line interface configured. Make sure you have
KUBECONFIG
configured on your managed cluster.If you run
oc get ns | grep open-cluster-management-agent
, you should see two namespaces:open-cluster-management-agent Active 10m open-cluster-management-agent-addon Active 10m
Remove the
klusterlet
custom resource by using the following command:oc get klusterlet | grep klusterlet | awk '{print $1}' | xargs oc patch klusterlet --type=merge -p '{"metadata":{"finalizers": []}}'
Run the following command to remove the remaining resources:
oc delete namespaces open-cluster-management-agent open-cluster-management-agent-addon --wait=false oc get crds | grep open-cluster-management.io | awk '{print $1}' | xargs oc delete crds --wait=false oc get crds | grep open-cluster-management.io | awk '{print $1}' | xargs oc patch crds --type=merge -p '{"metadata":{"finalizers": []}}'
Run the following command to ensure that both namespaces and all open cluster management
crds
are removed:oc get crds | grep open-cluster-management.io | awk '{print $1}' oc get ns | grep open-cluster-management-agent
1.7.18.4. Defragmenting the etcd database after removing a cluster
Having many managed clusters can affect the size of the etcd
database in the hub cluster. In OpenShift Container Platform 4.8, when you delete a managed cluster, the etcd
database in the hub cluster is not automatically reduced in size. In some scenarios, the etcd
database can run out of space. An error etcdserver: mvcc: database space exceeded
is displayed. To correct this error, reduce the size of the etcd
database by compacting the database history and defragmenting the etcd
database.
Note: For OpenShift Container Platform version 4.9 and later, the etcd Operator automatically defragments disks and compacts the etcd
history. No manual intervention is needed. The following procedure is for OpenShift Container Platform version 4.8 and earlier.
Compact the etcd
history and defragment the etcd
database in the hub cluster by completing the following procedure.
1.7.18.4.1. Prerequisites
-
Install the OpenShift CLI (
oc
). -
Log in as a user with
cluster-admin
privileges.
1.7.18.4.2. Procedure
Compact the
etcd
history.Open a remote shell session to the
etcd
member, for example:$ oc rsh -n openshift-etcd etcd-control-plane-0.example.com etcdctl endpoint status --cluster -w table
Run the following command to compact the
etcd
history:sh-4.4#etcdctl compact $(etcdctl endpoint status --write-out="json" | egrep -o '"revision":[0-9]*' | egrep -o '[0-9]*' -m1)
Example output
$ compacted revision 158774421
-
Defragment the
etcd
database and clear anyNOSPACE
alarms as outlined in Defragmentingetcd
data.
1.8. Discovery service introduction
You can discover OpenShift 4 clusters that are available from OpenShift Cluster Manager. After discovery, you can import your clusters to manage. The Discovery services uses the Discover Operator for back-end and console usage.
You must have an OpenShift Cluster Manager credential. See Creating a credential for Red Hat OpenShift Cluster Manager if you need to create a credential.
Required access: Administrator
1.8.1. Configure Discovery with the console
Configure Discovery in the console to find clusters. When you configure the Discovery feature on your cluster, you must enable a DiscoveryConfig
resource to connect to the OpenShift Cluster Manager to begin discovering clusters that are a part of your organization. You can create multiple DiscoveryConfig
resources with separate credentials.
After you discover clusters, you can import clusters that appear in the Discovered clusters tab of the console. Use the product console to enable Discovery.
Required access: Access to the namespace where the credential was created.
1.8.1.1. Prerequisites
- You need a credential. See Creating a credential for Red Hat OpenShift Cluster Manager to connect to OpenShift Cluster Manager.
- You need access to the namespaces that were used to configure Discovery.
1.8.1.2. Import discovered clusters from the console
To manually import other infrastructure provider discovered clusters, complete the following steps:
- Go to the existing Clusters page and click the Discovered clusters tab.
- From the Discovered clusters table, find the cluster that you want to import.
- From the options menu, choose Import cluster.
- For discovered clusters, you can import manually using the documentation, or you can choose Import clusters automatically.
- To import automatically with your credentials or Kubeconfig file, copy and paste the content.
- Click Import.
1.8.1.3. View discovered clusters
After you set up your credentials and discover your clusters for import, you can view them in the console.
- Click Clusters > Discovered clusters
View the populated table with the following information:
- Name is the display name that is designated in OpenShift Cluster Manager. If the cluster does not have a display name, a generated name based on the cluster console URL is displayed. If the console URL is missing or was modified manually in OpenShift Cluster Manager, the cluster external ID is displayed.
- Namespace is the namespace where you created the credential and discovered clusters.
- Type is the discovered cluster Red Hat OpenShift type.
- Distribution version is the discovered cluster Red Hat OpenShift version.
- Infrastructure provider is the cloud provider of the discovered cluster.
- Last active is the last time the discovered cluster was active.
- Created when the discovered cluster was created.
- Discovered when the discovered cluster was discovered.
- You can search for any information in the table, as well. For example, to show only Discovered clusters in a particular namespace, search for that namespace.
- You can now click Import cluster to create managed clusters.
1.8.2. Enable Discovery using the CLI
Enable discovery using the CLI to find clusters that are available from Red Hat OpenShift Cluster Manager.
Required access: Administrator
1.8.2.1. Prerequisites
- Create a credential to connect to Red Hat OpenShift Cluster Manager.
1.8.2.2. Discovery set up and process
Note: The DiscoveryConfig
must be named discovery
and must be created in the same namespace as the selected credential
. See the following DiscoveryConfig
sample:
apiVersion: discovery.open-cluster-management.io/v1 kind: DiscoveryConfig metadata: name: discovery namespace: <NAMESPACE_NAME> spec: credential: <SECRET_NAME> filters: lastActive: 7 openshiftVersions: - "4.15"
-
Replace
SECRET_NAME
with the credential that you previously set up. -
Replace
NAMESPACE_NAME
with the namespace ofSECRET_NAME
. -
Enter the maximum time since last activity of your clusters (in days) to discover. For example, with
lastActive: 7
, clusters that active in the last 7 days are discovered. -
Enter the versions of Red Hat OpenShift clusters to discover as a list of strings. Note: Every entry in the
openshiftVersions
list specifies an OpenShift major and minor version. For example, specifying"4.11"
will include all patch releases for the OpenShift version4.11
, for example4.11.1
,4.11.2
.
1.8.2.3. View discovered clusters
View discovered clusters by running oc get discoveredclusters -n <namespace>
where namespace
is the namespace where the discovery credential exists.
1.8.2.3.1. DiscoveredClusters
Objects are created by the Discovery controller. These DiscoveredClusters
represent the clusters that are found in OpenShift Cluster Manager by using the filters and credentials that are specified in the DiscoveryConfig
discoveredclusters.discovery.open-cluster-management.io
API. The value for name
is the cluster external ID:
apiVersion: discovery.open-cluster-management.io/v1 kind: DiscoveredCluster metadata: name: fd51aafa-95a8-41f7-a992-6fb95eed3c8e namespace: <NAMESPACE_NAME> spec: activity_timestamp: "2021-04-19T21:06:14Z" cloudProvider: vsphere console: https://console-openshift-console.apps.qe1-vmware-pkt.dev02.red-chesterfield.com creation_timestamp: "2021-04-19T16:29:53Z" credential: apiVersion: v1 kind: Secret name: <SECRET_NAME> namespace: <NAMESPACE_NAME> display_name: qe1-vmware-pkt.dev02.red-chesterfield.com name: fd51aafa-95a8-41f7-a992-6fb95eed3c8e openshiftVersion: 4.15 status: Stale
1.8.3. Enabling a discovered cluster for management
Automatically import supported clusters into your hub cluster with the Discovery-Operator
for faster cluster management, without manually importing individual clusters.
Required access: Cluster administrator
1.8.3.1. Prerequisites
- Discovery is enabled by default. If you changed default settings, you need to enable Discovery.
- You must set up the OpenShift Service on AWS command line interface. See Getting started with the OpenShift Service on AWS CLI documentation.
1.8.3.2. Importing discovered OpenShift Service on AWS and hosted control plane clusters automatically
The following procedure is an example of how to import your discovered OpenShift Service on AWS and hosted control planes clusters automatically by using the Discovery-Operator
.
1.8.3.2.1. Importing from the console
To automatically import the DiscoveredCluster
resource, you must modify the resource and set the importAsManagedCluster
field to true
in the console. See the following procedure:
- Log in to your hub cluster from the console.
- Select Search from the navigation menu.
- From the search bar, enter the following query: "DiscoveredCluster".
-
The
DiscoveredCluster
resource results appear. Go to the
DiscoveredCluster
resource and setimportAsManagedCluster
totrue
. See the following example, whereimportAsManagedCluster
is set totrue
and<4.x.z>
is your supported OpenShift Container Platform version:apiVersion: discovery.open-cluster-management.io/v1 kind: DiscoveredCluster metadata: name: 28c17977-fc73-4050-b5cc-a5aa2d1d6892 namespace: discovery spec: openshiftVersion: <4.x.z> isManagedCluster: false cloudProvider: aws name: 28c17977-fc73-4050-b5cc-a5aa2d1d6892 displayName: rosa-dc status: Active importAsManagedCluster: true 1 type: <supported-type> 2
- 1
- By setting the field to
true
, theDiscovery-Operator
imports theDiscoveredCluster
resource, creates aManagedCluster
resource and if the Red Hat Advanced Cluster Management is installed, creates theKlusterletAddOnConfig
resource. It also creates theSecret
resources for your automatic import. - 2
- You must use
ROSA
orMultiClusterEngineHCP
as the parameter value.
-
To verify that the
DiscoveredCluster
resource is imported, go to the Clusters page. Check the import status of your cluster from the Cluster list tab. If you want to detach managed clusters for Discovery to prevent automatic reimport, select the Detach cluster option. The
Discovery-Operator
adds the following annotation,discovery.open-cluster-management.io/previously-auto-imported: 'true'
.Your
DiscoveredCluster
resource might resemble the following YAML:apiVersion: discovery.open-cluster-management.io/v1 kind: DiscoveredCluster metadata: annotations: discovery.open-cluster-management.io/previously-auto-imported: 'true'
To verify that the
DiscoveredCluster
resource is not reimported automatically, check for the following message in theDiscovery-Operator
logs, where"rosa-dc"
is this discovered cluster:2024-06-12T14:11:43.366Z INFO reconcile Skipped automatic import for DiscoveredCluster due to existing 'discovery.open-cluster-management.io/previously-auto-imported' annotation {"Name": "rosa-dc"}
-
If you want to reimport the
DiscoveredCluster
resource automatically, you must remove the previously mentioned annotation.
1.8.3.2.2. Importing from the command line interface
To automatically import the DiscoveredCluster
resource from the command line complete the following steps:
To automatically import the
DiscoveredCluster
resource, set theimportAsManagedCluster
paramater totrue
by using the following command after you log in. Replace<name>
and<namespace>
with your name and namespace:oc patch discoveredcluster <name> -n <namespace> --type='json' -p='[{"op": "replace", "path": "/spec/importAsManagedCluster", "value": true}]'
Run the following command to verify that the cluster was imported as a managed cluster:
oc get managedcluster <name>
To get a description of your OpenShift Service on AWS cluster ID, run the following command from the OpenShift Service on AWS command line interface:
rosa describe cluster --cluster=<cluster-name> | grep -o '^ID:.*
For other Kubernetes providers, you must import these infrastructure provider DiscoveredCluster
resources manually. Directly apply Kubernetes configurations to the other types of DiscoveredCluster
resources. If you enable the importAsManagedCluster
field from the DiscoveredCluster
resource, it is not imported due to the Discovery webhook.
1.8.3.3. Additional resources
1.9. Host inventory introduction
The host inventory management and on-premises cluster installation are available using the multicluster engine operator central infrastructure management feature.
The central infrastructure management feature is an Red Hat OpenShift Container Platform install experience in multicluster engine operator that focuses on managing bare metal hosts during their lifecycle.
The Assisted Installer is an install method for OpenShift Container Platform that uses agents to run pre-installed validations on the target hosts, and a central service to evaluate and track install progress.
The infrastructure operator for Red Hat OpenShift is a multicluster engine operator component that manages and installs the workloads that run the Assisted Installer service.
You can use the console to create a host inventory, which is a pool of bare metal or virtual machines that you can use to create on-premises OpenShift Container Platform clusters. These clusters can be standalone, with dedicated machines for the control plane, or hosted control planes, where the control plane runs as pods on a hub cluster.
You can install standalone clusters by using the console, API, or GitOps by using Zero Touch Provisioning (ZTP). See Installing GitOps ZTP in a disconnected environment in the Red Hat OpenShift Container Platform documentation for more information on ZTP.
A machine joins the host inventory after booting with a Discovery Image. The Discovery Image is a Red Hat CoreOS live image that contains the following:
- An agent that performs discovery, validation, and installation tasks.
- The necessary configuration for reaching the service on the hub cluster, including the endpoint, token, and static network configuration, if applicable.
You have one Discovery Image for each infrastructure environment, which is a set of hosts sharing a common set of properties. The InfraEnv
custom resource definition represents this infrastructure environment and associated Discovery Image. You can specify the Red Hat Core OS version used for the Discovery Image by setting the osImageVersion
field in the InfraEnv
custom resource. If you do not specify a value, the latest Red Hat Core OS version is used.
After the host boots and the agent contacts the service, the service creates a new Agent
custom resource on the hub cluster representing that host. The Agent
resources make up the host inventory.
You can install hosts in the inventory as OpenShift nodes later. The agent writes the operating system to the disk, along with the necessary configuration, and reboots the host.
Note: Red Hat Advanced Cluster Management 2.9 and later and central infrastructure management support the Nutanix platform by using AgentClusterInstall
, which requires additional configuration by creating the Nutanix virtual machines. To learn more, see Optional: Installing on Nutanix in the Assisted Installer documentation.
Continue reading to learn more about host inventories and central infrastructure management:
- Enabling the central infrastructure management service
- Enabling central infrastructure management on Amazon Web Services
- Creating a host inventory by using the console
- Creating a host inventory by using the command line interface
- Configuring advanced networking for an infrastructure environment
- Adding hosts to the host inventory by using the Discovery Image
- Automatically adding bare metal hosts to the host inventory
- Managing your host inventory
- Creating a cluster in an on-premises environment
- Importing an on-premises Red Hat OpenShift Container Platform cluster manually by using central infrastructure management
1.9.1. Enabling the central infrastructure management service
The central infrastructure management service is provided with the multicluster engine operator and deploys OpenShift Container Platform clusters. The central infrastructure management service is deployed automatically when you enable the MultiClusterHub Operator on the hub cluster, but you have to enable the service manually.
1.9.1.1. Prerequisites
See the following prerequisites before enabling the central infrastructure management service:
- You must have a deployed hub cluster on a supported OpenShift Container Platform version and a supported Red Hat Advanced Cluster Management for Kubernetes version.
- You need internet access for your hub cluster (connected), or a connection to an internal or mirror registry that has a connection to the internet (disconnected) to retrieve the required images for creating the environment.
- You must open the required ports for bare metal provisioning. See Ensuring required ports are open in the OpenShift Container Platform documentation.
- You need a bare metal host custom resource definition.
- You need an OpenShift Container Platform pull secret. See Using image pull secrets for more information.
- You need a configured default storage class.
- For disconnected environments only, complete the procedure for Clusters at the network far edge in the OpenShift Container Platform documentation.
See the following sections:
- Creating a bare metal host custom resource definition
- Creating or modifying the Provisioning resource
- Enabling central infrastructure management in disconnected environments
- Enabling central infrastructure management in connected environments
- Installing a FIPS-enabled cluster by using the Assisted Installer
1.9.1.2. Creating a bare metal host custom resource definition
You need a bare metal host custom resource definition before enabling the central infrastructure management service.
Check if you already have a bare metal host custom resource definition by running the following command:
oc get crd baremetalhosts.metal3.io
- If you have a bare metal host custom resource definition, the output shows the date when the resource was created.
- If you do not have the resource, you receive an error that resembles the following:
Error from server (NotFound): customresourcedefinitions.apiextensions.k8s.io "baremetalhosts.metal3.io" not found
If you do not have a bare metal host custom resource definition, download the metal3.io_baremetalhosts.yaml file and apply the content by running the following command to create the resource:
oc apply -f
1.9.1.3. Creating or modifying the Provisioning resource
You need a Provisioning
resource before enabling the central infrastructure management service.
Check if you have the
Provisioning
resource by running the following command:oc get provisioning
-
If you already have a
Provisioning
resource, continue by Modifying theProvisioning
resource. -
If you do not have a
Provisioning
resource, you receive aNo resources found
error. Continue by Creating theProvisioning
resource.
-
If you already have a
1.9.1.3.1. Modifying the Provisioning resource
If you already have a Provisioning
resource, you must modify the resource if your hub cluster is installed on one of the following platforms:
- Bare metal
- Red Hat OpenStack Platform
- VMware vSphere
-
User-provisioned infrastructure (UPI) method and the platform is
None
If your hub cluster is installed on a different platform, continue at Enabling central infrastructure management in disconnected environments or Enabling central infrastructure management in connected environments.
Modify the
Provisioning
resource to allow the Bare Metal Operator to watch all namespaces by running the following command:oc patch provisioning provisioning-configuration --type merge -p '{"spec":{"watchAllNamespaces": true }}'
1.9.1.3.2. Creating the Provisioning resource
If you do not have a Provisioning
resource, complete the following steps:
Create the
Provisioning
resource by adding the following YAML content:apiVersion: metal3.io/v1alpha1 kind: Provisioning metadata: name: provisioning-configuration spec: provisioningNetwork: "Disabled" watchAllNamespaces: true
Apply the content by running the following command:
oc apply -f
1.9.1.4. Enabling central infrastructure management in disconnected environments
To enable central infrastructure management in disconnected environments, complete the following steps:
Create a
ConfigMap
in the same namespace as your infrastructure operator to specify the values forca-bundle.crt
andregistries.conf
for your mirror registry. Your fileConfigMap
might resemble the following example:apiVersion: v1 kind: ConfigMap metadata: name: <mirror-config> namespace: multicluster-engine labels: app: assisted-service data: ca-bundle.crt: | <certificate-content> registries.conf: | unqualified-search-registries = ["registry.access.redhat.com", "docker.io"] [[registry]] prefix = "" location = "registry.redhat.io/multicluster-engine" mirror-by-digest-only = true [[registry.mirror]] location = "mirror.registry.com:5000/multicluster-engine"
Note: You must set
mirror-by-digest-only
totrue
because release images are specified by using a digest.Registries in the list of
unqualified-search-registries
are automatically added to an authentication ignore list in thePUBLIC_CONTAINER_REGISTRIES
environment variable. The specified registries do not require authentication when the pull secret of the managed cluster is validated.-
Write the key pairs representing the headers and query parameters that you want to send with every
osImage
request. If you don’t need both parameters, write key pairs for only headers or query parameters.
Important: Headers and query parameters are only encrypted if you use HTTPS. Make sure to use HTTPS to avoid security issues.
Create a file named
headers
and add content that resembles the following example:{ "Authorization": "Basic xyz" }
Create a file named
query_params
and add content that resembles the following example:{ "api_key": "myexampleapikey", }
Create a secret from the parameter files that you created by running the following command. If you only created one parameter file, remove the argument for the file that you didn’t create:
oc create secret generic -n multicluster-engine os-images-http-auth --from-file=./query_params --from-file=./headers
If you want to use HTTPS
osImages
with a self-signed or third-party CA certificate, add the certificate to theimage-service-additional-ca
ConfigMap
. To create a certificate, run the following command:oc -n multicluster-engine create configmap image-service-additional-ca --from-file=tls.crt
-
Create the
AgentServiceConfig
custom resource by saving the following YAML content in theagent_service_config.yaml
file:
apiVersion: agent-install.openshift.io/v1beta1 kind: AgentServiceConfig metadata: name: agent spec: databaseStorage: accessModes: - ReadWriteOnce resources: requests: storage: <db_volume_size> filesystemStorage: accessModes: - ReadWriteOnce resources: requests: storage: <fs_volume_size> mirrorRegistryRef: name: <mirror_config> 1 unauthenticatedRegistries: - <unauthenticated_registry> 2 imageStorage: accessModes: - ReadWriteOnce resources: requests: storage: <img_volume_size> 3 OSImageAdditionalParamsRef: name: os-images-http-auth OSImageCACertRef: name: image-service-additional-ca osImages: - openshiftVersion: "<ocp_version>" 4 version: "<ocp_release_version>" 5 url: "<iso_url>" 6 cpuArchitecture: "x86_64"
+
- 1
- Replace
mirror_config
with the name of theConfigMap
that contains your mirror registry configuration details. - 2
- Include the optional
unauthenticated_registry
parameter if you are using a mirror registry that does not require authentication. Entries on this list are not validated or required to have an entry in the pull secret. - 3
- Replace
img_volume_size
with the size of the volume for theimageStorage
field, for example10Gi
per operating system image. The minimum value is10Gi
, but the recommended value is at least50Gi
. This value specifies how much storage is allocated for the images of the clusters. You need to allow 1 GB of image storage for each instance of Red Hat Enterprise Linux CoreOS that is running. You might need to use a higher value if there are many clusters and instances of Red Hat Enterprise Linux CoreOS. - 4
- Replace
ocp_version
with the OpenShift Container Platform version to install, for example,4.14
. - 5
- Replace
ocp_release_version
with the specific install version, for example,49.83.202103251640-0
. - 6
- Replace
iso_url
with the ISO url, for example,https://mirror.openshift.com/pub/openshift-v4/x86_64/dependencies/rhcos/4.13/4.13.3/rhcos-4.13.3-x86_64-live.x86_64.iso
. You can find other values at the rhoc.
If you are using HTTPS osImages
with self-signed or third-party CA certificates, reference the certificate in the OSImageCACertRef
spec.
Important: If you are using the late binding feature and the spec.osImages
releases in the AgentServiceConfig
custom resource are version 4.13 or later, the OpenShift Container Platform release images that you use when creating your clusters must be the same. The Red Hat Enterprise Linux CoreOS images for version 4.13 and later are not compatible with earlier images.
You can verify that your central infrastructure management service is healthy by checking the assisted-service
and assisted-image-service
deployments and ensuring that their pods are ready and running.
1.9.1.5. Enabling central infrastructure management in connected environments
To enable central infrastructure management in connected environments, create the AgentServiceConfig
custom resource by saving the following YAML content in the agent_service_config.yaml
file:
apiVersion: agent-install.openshift.io/v1beta1 kind: AgentServiceConfig metadata: name: agent spec: databaseStorage: accessModes: - ReadWriteOnce resources: requests: storage: <db_volume_size> 1 filesystemStorage: accessModes: - ReadWriteOnce resources: requests: storage: <fs_volume_size> 2 imageStorage: accessModes: - ReadWriteOnce resources: requests: storage: <img_volume_size> 3
- 1
- Replace
db_volume_size
with the volume size for thedatabaseStorage
field, for example10Gi
. This value specifies how much storage is allocated for storing files such as database tables and database views for the clusters. The minimum value that is required is1Gi
. You might need to use a higher value if there are many clusters. - 2
- Replace
fs_volume_size
with the size of the volume for thefilesystemStorage
field, for example200M
per cluster and2-3Gi
per supported OpenShift Container Platform version. The minimum value that is required is1Gi
, but the recommended value is at least100Gi
. This value specifies how much storage is allocated for storing logs, manifests, andkubeconfig
files for the clusters. You might need to use a higher value if there are many clusters. - 3
- Replace
img_volume_size
with the size of the volume for theimageStorage
field, for example10Gi
per operating system image. The minimum value is10Gi
, but the recommended value is at least50Gi
. This value specifies how much storage is allocated for the images of the clusters. You need to allow 1 GB of image storage for each instance of Red Hat Enterprise Linux CoreOS that is running. You might need to use a higher value if there are many clusters and instances of Red Hat Enterprise Linux CoreOS.
Your central infrastructure management service is configured. You can verify that it is healthy by checking the assisted-service
and assisted-image-service
deployments and ensuring that their pods are ready and running.
1.9.1.6. Installing a FIPS-enabled cluster by using the Assisted Installer
When you install a OpenShift Container Platform cluster version 4.15 and earlier that is in FIPS mode, you must specify that the installers run Red Hat Enterprise Linux (RHEL) version 8 in the AgentServiceConfig
resource.
Required access: You must have access to edit the AgentServiceConfig
and AgentClusterInstall
resources.
Complete the following steps to update the AgentServiceConfig
resource:
Log in to you managed cluster by using the following command:
oc login
Add the
agent-install.openshift.io/service-image-base: el8
annotation in theAgentServiceConfig
resource.Your
AgentServiceConfig
resource might resemble the following YAML:apiVersion: agent-install.openshift.io/v1beta1 kind: AgentServiceConfig metadata: annotations: agent-install.openshift.io/service-image-base: el8 ...
1.9.1.7. Additional resources
- For additional information about zero touch provisioning, see Challenges of the network far edge in the OpenShift Container Platform documentation.
- Using image pull secrets
1.9.2. Enabling central infrastructure management on Amazon Web Services
If you are running your hub cluster on Amazon Web Services and want to enable the central infrastructure management service, complete the following steps after Enabling the central infrastructure management service:
Make sure you are logged in at the hub cluster and find the unique domain configured on the
assisted-image-service
by running the following command:oc get routes --all-namespaces | grep assisted-image-service
Your domain might resemble the following example:
assisted-image-service-multicluster-engine.apps.<yourdomain>.com
Make sure you are logged in at the hub cluster and create a new
IngressController
with a unique domain using theNLB
type
parameter. See the following example:apiVersion: operator.openshift.io/v1 kind: IngressController metadata: name: ingress-controller-with-nlb namespace: openshift-ingress-operator spec: domain: nlb-apps.<domain>.com routeSelector: matchLabels: router-type: nlb endpointPublishingStrategy: type: LoadBalancerService loadBalancer: scope: External providerParameters: type: AWS aws: type: NLB
-
Add
<yourdomain>
to thedomain
parameter inIngressController
by replacing<domain>
innlb-apps.<domain>.com
with<yourdomain>
. Apply the new
IngressController
by running the following command:oc apply -f ingresscontroller.yaml
Make sure that the value of the
spec.domain
parameter of the newIngressController
is not in conflict with an existingIngressController
by completing the following steps:List all
IngressControllers
by running the following command:oc get ingresscontroller -n openshift-ingress-operator
Run the following command on each of the
IngressControllers
, except theingress-controller-with-nlb
that you just created:oc edit ingresscontroller <name> -n openshift-ingress-operator
If the
spec.domain
report is missing, add a default domain that matches all of the routes that are exposed in the cluster exceptnlb-apps.<domain>.com
.If the
spec.domain
report is provided, make sure that thenlb-apps.<domain>.com
route is excluded from the specified range.
Run the following command to edit the
assisted-image-service
route to use thenlb-apps
location:oc edit route assisted-image-service -n <namespace>
The default namespace is where you installed the multicluster engine operator.
Add the following lines to the
assisted-image-service
route:metadata: labels: router-type: nlb name: assisted-image-service
In the
assisted-image-service
route, find the URL value ofspec.host
. The URL might resemble the following example:assisted-image-service-multicluster-engine.apps.<yourdomain>.com
-
Replace
apps
in the URL withnlb-apps
to match the domain configured in the newIngressController
. To verify that the central infrastructure management service is enabled on Amazon Web Services, run the following command to verify that the pods are healthy:
oc get pods -n multicluster-engine | grep assist
-
Create a new host inventory and ensure that the download URL uses the new
nlb-apps
URL.
1.9.3. Creating a host inventory by using the console
You can create a host inventory (infrastructure environment) to discover physical or virtual machines that you can install your OpenShift Container Platform clusters on.
1.9.3.1. Prerequisites
- You must enable the central infrastructure management service. See Enabling the central infrastructure management service for more information.
1.9.3.2. Creating a host inventory
Complete the following steps to create a host inventory by using the console:
- From the console, navigate to Infrastructure > Host inventory and click Create infrastructure environment.
Add the following information to your host inventory settings:
-
Name: A unique name for your infrastructure environment. Creating an infrastructure environment by using the console also creates a new namespace for the
InfraEnv
resource with the name you chose. If you createInfraEnv
resources by using the command line interface and want to monitor the resources in the console, use the same name for your namespace and theInfraEnv
. - Network type: Specifies if the hosts you add to your infrastructure environment use DHCP or static networking. Static networking configuration requires additional steps.
- Location: Specifies the geographic location of the hosts. The geographic location can be used to define which data center the hosts are located.
- Labels: Optional field where you can add labels to the hosts that are discovered with this infrastructure environment. The specified location is automatically added to the list of labels.
- Infrastructure provider credentials: Selecting an infrastructure provider credential automatically populates the pull secret and SSH public key fields with information in the credential. For more information, see Creating a credential for an on-premises environment.
- Pull secret: Your OpenShift Container Platform pull secret that enables you to access the OpenShift Container Platform resources. This field is automatically populated if you selected an infrastructure provider credential.
-
SSH public key: The SSH key that enables the secure communication with the hosts. You can use it to connect to the host for troubleshooting. After installing a cluster, you can no longer connect to the host with the SSH key. The key is generally in your
id_rsa.pub
file. The default file path is~/.ssh/id_rsa.pub
. This field is automatically populated if you selected an infrastructure provider credential that contains the value of a SSH public key. If you want to enable proxy settings for your hosts, select the setting to enable it and enter the following information:
- HTTP Proxy URL: The URL of the proxy for HTTP requests.
- HTTPS Proxy URL: The URL of the proxy for HTTP requests. The URL must start with HTTP. HTTPS is not supported. If you do not provide a value, your HTTP proxy URL is used by default for both HTTP and HTTPS connections.
-
No Proxy domains: A list of domains separated by commas that you do not want to use the proxy with. Start a domain name with a period (
.
) to include all of the subdomains that are in that domain. Add an asterisk (*
) to bypass the proxy for all destinations.
- Optionally add your own Network Time Protocol (NTP) sources by providing a comma separated list of IP or domain names of the NTP pools or servers.
-
Name: A unique name for your infrastructure environment. Creating an infrastructure environment by using the console also creates a new namespace for the
If you need advanced configuration options that are not available in the console, continue to Creating a host inventory by using the command line interface.
If you do not need advanced configuration options, you can continue by configuring static networking, if required, and begin adding hosts to your infrastructure environment.
1.9.3.3. Accessing a host inventory
To access a host inventory, select Infrastructure > Host inventory in the console. Select your infrastructure environment from the list to view the details and hosts.
1.9.3.4. Additional resources
If you created a host inventory as part of the process to configure hosted control planes on bare metal, complete the following procedures:
1.9.4. Creating a host inventory by using the command line interface
You can create a host inventory (infrastructure environment) to discover physical or virtual machines that you can install your OpenShift Container Platform clusters on. Use the command line interface instead of the console for automated deployments, or for the following advanced configuration options:
- Automatically bind discovered hosts to an existing cluster definition
- Override the ignition configuration of the Discovery Image
- Control the iPXE behavior
- Modify kernel arguments for the Discovery Image
- Pass additional certificates that you want the host to trust during the discovery phase
- Select a Red Hat CoreOS version to boot for testing that is not the default option of the newest version
1.9.4.1. Prerequisite
- You must enable the central infrastructure management service. See Enabling the central infrastructure management service for more information.
1.9.4.2. Creating a host inventory
Complete the following steps to create a host inventory (infrastructure environment) by using the command line interface:
Log in to your hub cluster by running the following command:
oc login
Create a namespace for your resource.
Create a file named,
namespace.yaml
, and add the following content:apiVersion: v1 kind: Namespace metadata: name: <your_namespace> 1
- 1
- Use the same name for your namespace and your infrastructure environment to monitor your inventory in the console.
Apply the YAML content by running the following command:
oc apply -f namespace.yaml
Create a
Secret
custom resource containing your OpenShift Container Platform pull secret.Create the
pull-secret.yaml
file and add the following content:apiVersion: v1 kind: Secret type: kubernetes.io/dockerconfigjson metadata: name: pull-secret 1 namespace: <your_namespace> stringData: .dockerconfigjson: <your_pull_secret> 2
Apply the YAML content by running the following command:
oc apply -f pull-secret.yaml
Create the infrastructure environment.
Create the
infra-env.yaml
file and add the following content. Replace values where needed:apiVersion: agent-install.openshift.io/v1beta1 kind: InfraEnv metadata: name: myinfraenv namespace: <your_namespace> spec: proxy: httpProxy: <http://user:password@ipaddr:port> httpsProxy: <http://user:password@ipaddr:port> noProxy: additionalNTPSources: sshAuthorizedKey: pullSecretRef: name: <name> agentLabels: <key>: <value> nmStateConfigLabelSelector: matchLabels: <key>: <value> clusterRef: name: <cluster_name> namespace: <project_name> ignitionConfigOverride: '{"ignition": {"version": "3.1.0"}, …}' cpuArchitecture: x86_64 ipxeScriptType: DiscoveryImageAlways kernelArguments: - operation: append value: audit=0 additionalTrustBundle: <bundle> osImageVersion: <version>
See the following field descriptions in the InfraEnv
table:
Field | Optional or required | Description |
---|---|---|
| Optional |
Defines the proxy settings for agents and clusters that use the |
| Optional |
The URL of the proxy for HTTP requests. The URL must start with |
| Optional |
The URL of the proxy for HTTP requests. The URL must start with |
| Optional | A list of domains and CIDRs separated by commas that you do not want to use the proxy with. |
| Optional | A list of Network Time Protocol (NTP) sources (hostname or IP) to add to all hosts. They are added to NTP sources that are configured by using other options, such as DHCP. |
| Optional | SSH public keys that are added to all hosts for use in debugging during the discovery phase. The discovery phase is when the host boots the Discovery Image. |
| Required | The name of the Kubernetes secret containing your pull secret. |
| Optional |
Labels that are automatically added to the |
| Optional |
Consolidates advanced network configuration such as static IPs, bridges, and bonds for the hosts. The host network configuration is specified in one or more |
| Optional |
References an existing |
| Optional |
Modifies the ignition configuration of the Red Hat CoreOS live image, such as adding files. Make sure to only use |
| Optional | Choose one of the following supported CPU architectures: x86_64, aarch64, ppc64le, or s390x. The default value is x86_64. |
| Optional |
Causes the image service to always serve the iPXE script when set to the default value of |
| Optional |
Allows modifying the kernel arguments for when the Discovery Image boots. Possible values for |
| Optional |
A PEM-encoded X.509 certificate bundle, usually needed if the hosts are in a network with a re-encrypting man-in-the-middle (MITM) proxy, or if the hosts need to trust certificates for other purposes, such as container image registries. Hosts discovered by your |
| Optional |
The Red Hat CoreOS image version to use for your |
Apply the YAML content by running the following command:
oc apply -f infra-env.yaml
To verify that your host inventory is created, check the status with the following command:
oc describe infraenv myinfraenv -n <your_namespace>
See the following list of notable properties:
-
conditions
: The standard Kubernetes conditions indicating if the image was created succesfully. -
isoDownloadURL
: The URL to download the Discovery Image. -
createdTime
: The time at which the image was last created. If you modify theInfraEnv
, make sure that the timestamp has been updated before downloading a new image.
Note: If you modify the InfraEnv
resource, make sure that the InfraEnv
has created a new Discovery Image by looking at the createdTime
property. If you already booted hosts, boot them again with the latest Discovery Image.
You can continue by configuring static networking, if required, and begin adding hosts to your infrastructure environment.
1.9.4.3. Additional resources
1.9.5. Configuring advanced networking for an infrastructure environment
For hosts that require networking beyond DHCP on a single interface, you must configure advanced networking. The required configuration includes creating one or more instances of the NMStateConfig
resource that describes the networking for one or more hosts.
Each NMStateConfig
resource must contain a label that matches the nmStateConfigLabelSelector
on your InfraEnv
resource. See Creating a host inventory by using the command line interface to learn more about the nmStateConfigLabelSelector
.
The Discovery Image contains the network configurations defined in all referenced NMStateConfig
resources. After booting, each host compares each configuration to its network interfaces and applies the appropriate configuration.
1.9.5.1. Prerequisites
- You must enable the central infrastructure management service. See Enabling the central infrastructure management service for more information.
- You must create a host inventory. See Creating a host inventory by using the console for more information.
1.9.5.2. Configuring advanced networking by using the command line interface
To configure advanced networking for your infrastructure environment by using the command line interface, complete the following steps:
Create a file named
nmstateconfig.yaml
and add content that is similar to the following template. Replace values where needed:apiVersion: agent-install.openshift.io/v1beta1 kind: NMStateConfig metadata: name: mynmstateconfig namespace: <your-infraenv-namespace> labels: some-key: <some-value> spec: config: interfaces: - name: eth0 type: ethernet state: up mac-address: 02:00:00:80:12:14 ipv4: enabled: true address: - ip: 192.168.111.30 prefix-length: 24 dhcp: false - name: eth1 type: ethernet state: up mac-address: 02:00:00:80:12:15 ipv4: enabled: true address: - ip: 192.168.140.30 prefix-length: 24 dhcp: false dns-resolver: config: server: - 192.168.126.1 routes: config: - destination: 0.0.0.0/0 next-hop-address: 192.168.111.1 next-hop-interface: eth1 table-id: 254 - destination: 0.0.0.0/0 next-hop-address: 192.168.140.1 next-hop-interface: eth1 table-id: 254 interfaces: - name: "eth0" macAddress: "02:00:00:80:12:14" - name: "eth1" macAddress: "02:00:00:80:12:15"
Field | Optional or required | Description |
---|---|---|
| Required | Use a name that is relevant to the host or hosts you are configuring. |
| Required |
The namespace must match the namespace of your |
| Required |
Add one or more labels that match the |
| Optional |
Describes the network settings in |
| Optional |
Describes the mapping between interface names found in the specified |
Note: The Image Service automatically creates a new image when you update any InfraEnv
properties or change the NMStateConfig
resources that match its label selector. If you add NMStateConfig
resources after creating the InfraEnv
resource, make sure that the InfraEnv
creates a new Discovery Image by checking the createdTime
property in your InfraEnv
. If you already booted hosts, boot them again with the latest Discovery Image.
Apply the YAML content by running the following command:
oc apply -f nmstateconfig.yaml
1.9.5.3. Additional resources
1.9.6. Adding hosts to the host inventory by using the Discovery Image
After you create your host inventory (infrastructure environment), you can discover your hosts and add them to your inventory.
To add hosts to your inventory, choose a method to download an ISO file and attach it to each server. For example, you can download ISO files by using a virtual media, or by writing the ISO file to a USB drive.
Important: To prevent the installation from failing, keep the Discovery ISO media connected to the device during the installation process, and set each host to boot from the device one time.
1.9.6.1. Prerequisites
- You must enable the central infrastructure management service. See Enabling the central infrastructure management service for more information.
- You must create a host inventory. See Creating a host inventory by using the console for more information.
1.9.6.2. Adding hosts by using the console
Download the ISO file by completing the following steps:
- Select Infrastructure > Host inventory in the console.
- Select your infrastructure environment from the list.
Click Add hosts and select With Discovery ISO.
You now see a URL to download the ISO file. Booted hosts appear in the host inventory table. Hosts might take a few minutes to appear.
Note: By default, the ISO that is provided is a minimal ISO. The minimal ISO does not contain the root file system,
RootFS
. TheRootFS
is downloaded later. To display full ISO, replaceminimal.iso
in the URL withfull.iso
.- Approve each host so that you can use it. You can select hosts from the inventory table by clicking Actions and selecting Approve.
1.9.6.3. Adding hosts by using the command line interface
The URL to download the ISO file in the isoDownloadURL
property is in the status of your InfraEnv
resource. See Creating a host inventory by using the command line interface for more information about the InfraEnv
resource.
Each booted host creates an Agent
resource in the same namespace.
Run the following command to view the download URL in the
InfraEnv
custom resource:oc get infraenv -n <infra env namespace> <infra env name> -o jsonpath='{.status.isoDownloadURL}'
See the following output:
https://assisted-image-service-assisted-installer.apps.example-acm-hub.com/byapikey/eyJhbGciOiJFUzI1NiIsInC93XVCJ9.eyJpbmZyYV9lbnZfaWQcTA0Y38sWVjYi02MTA0LTQ4NDMtODasdkOGIxYTZkZGM5ZTUifQ.3ydTpHaXJmTasd7uDp2NvGUFRKin3Z9Qct3lvDky1N-5zj3KsRePhAM48aUccBqmucGt3g/4.16/x86_64/minimal.iso
Note: By default, the ISO that is provided is a minimal ISO. The minimal ISO does not contain the root file system,
RootFS
. TheRootFS
is downloaded later. To display full ISO, replaceminimal.iso
in the URL withfull.iso
.Use the URL to download the ISO file and boot your hosts with the ISO file.
Next, you need to approve each host. See the following procedure:
Run the following command to list all of your
Agents
:oc get agent -n <infra env namespace>
You get an output that is similar to the following output:
NAME CLUSTER APPROVED ROLE STAGE 24a92a6f-ea35-4d6f-9579-8f04c0d3591e false auto-assign
Approve any
Agent
from the list with afalse
approval status. Run the following command:oc patch agent -n <infra env namespace> <agent name> -p '{"spec":{"approved":true}}' --type merge
Run the following command to confirm approval status:
oc get agent -n <infra env namespace>
You get an output that is similar to the following output with a
true
value:NAME CLUSTER APPROVED ROLE STAGE 173e3a84-88e2-4fe1-967f-1a9242503bec true auto-assign
1.9.6.4. Additional resources
1.9.7. Automatically adding bare metal hosts to the host inventory
After creating your host inventory (infrastructure environment) you can discover your hosts and add them to your inventory. You can automate booting the Discovery Image of your infrastructure environment by making the bare metal operator communicate with the Baseboard Management Controller (BMC) of each bare metal host by creating a BareMetalHost
resource and associated BMC secret for each host. The automation is set by a label on the BareMetalHost
that references your infrastructure environment.
The automation performs the following actions:
- Boots each bare metal host with the Discovery Image represented by the infrastructure environment
- Reboots each host with the latest Discovery Image in case the infrastructure environment or any associated network configurations is updated
-
Associates each
Agent
resource with its correspondingBareMetalHost
resource upon discovery -
Updates
Agent
resource properties based on information from theBareMetalHost
, such as hostname, role, and installation disk -
Approves the
Agent
for use as a cluster node
1.9.7.1. Prerequisites
- You must enable the central infrastructure management service. See Enabling the central infrastructure management service for more information.
- You must create a host inventory. See Creating a host inventory by using the console for more information.
1.9.7.2. Adding bare metal hosts by using the console
Complete the following steps to automatically add bare metal hosts to your host inventory by using the console:
- Select Infrastructure > Host inventory in the console.
- Select your infrastructure environment from the list.
- Click Add hosts and select With BMC Form.
- Add the required information and click Create.
1.9.7.3. Adding bare metal hosts by using the command line interface
Complete the following steps to automatically add bare metal hosts to your host inventory by using the command line interface.
Create a BMC secret by applying the following YAML content and replacing values where needed:
apiVersion: v1 kind: Secret metadata: name: <bmc-secret-name> namespace: <your_infraenv_namespace> 1 type: Opaque data: username: <username> password: <password>
- 1
- The namespace must be the same as the namespace of your
InfraEnv
.
Create a bare metal host by applying the following YAML content and replacing values where needed:
apiVersion: metal3.io/v1alpha1 kind: BareMetalHost metadata: name: <bmh-name> namespace: <your_infraenv_namespace> 1 annotations: inspect.metal3.io: disabled labels: infraenvs.agent-install.openshift.io: <your-infraenv> 2 spec: online: true automatedCleaningMode: disabled 3 bootMACAddress: <your-mac-address> 4 bmc: address: <machine-address> 5 credentialsName: <bmc-secret-name> 6 rootDeviceHints: deviceName: /dev/sda 7
- 1
- The namespace must be the same as the namespace of your
InfraEnv
. - 2
- The name must match the name of your
InfrEnv
and exist in the same namespace. - 3
- If you do not set a value, the
metadata
value is automatically used. - 4
- Make sure the MAC address matches the MAC address of one of the interaces on your host.
- 5
- Use the address of the BMC. See Port access for the out-of-band management IP address for more information.
- 6
- Make sure that the
credentialsName
value matches the name of the BMC secret you created. - 7
- Optional: Select the installation disk. See The BareMetalHost spec for the available root device hints. After the host is booted with the Discovery Image and the corresponding
Agent
resource is created, the installation disk is set according to this hint.
After turning on the host, the image starts downloading. This might take a few minutes. When the host is discovered, an Agent
custom resource is created automatically.
1.9.7.4. Removing managed cluster nodes by using the command line interface
To remove managed cluster nodes from a managed cluster, you need a hub cluster that is running on a supported OpenShift Container Platform version. Any static networking configuration required for the node to boot must be available. Make sure to not delete NMStateConfig
resources when you delete the agent and bare metal host.
1.9.7.4.1. Removing managed cluster nodes with a bare metal host
If you have a bare metal host on your hub cluster and want remove managed cluster nodes from a managed cluster, complete the following steps:
Add the following annotation to the
BareMetalHost
resource of the node that you want to delete:bmac.agent-install.openshift.io/remove-agent-and-node-on-delete: true
Delete the
BareMetalHost
resource by running the following command. Replace<bmh-name>
with the name of yourBareMetalHost
:oc delete bmh <bmh-name>
1.9.7.4.2. Removing managed cluster nodes without a bare metal host
If you do not have a bare metal host on your hub cluster and want remove managed cluster nodes from a managed cluster, follow the Deleting nodes instructions in the OpenShift Container Platform documentation.
1.9.7.5. Additional resources
- For additional information about zero touch provisioning, see Clusters at the network far edge in the OpenShift Container Platform documentation.
- To learn about the required ports for using a bare metal host, see Port access for the out-of-band management IP address in the OpenShift Container Platform documentation.
- To learn about root device hints, see Bare metal configuration in the OpenShift Container Platform documentation.
- Using image pull secrets
- Creating a credential for an on-premises environment
- To learn more about scaling compute machines, see Manually scaling a compute machine set in the OpenShift Container Platform documentation.
1.9.8. Managing your host inventory
You can manage your host inventory and edit existing hosts by using the console, or by using the command line interface and editing the Agent
resource.
1.9.8.1. Managing your host inventory by using the console
Each host that you successfully boot with the Discovery ISO appears as a row in your host inventory. You can use the console to edit and manage your hosts. If you booted the host manually and are not using the bare metal operator automation, you must approve the host in the console before you can use it. Hosts that are ready to be installed as OpenShift nodes have the Available
status.
1.9.8.2. Managing your host inventory by using the command line interface
An Agent
resource represents each host. You can set the following properties in an Agent
resource:
clusterDeploymentName
Set this property to the namespace and name of the
ClusterDeployment
you want to use if you want to install the host as a node in a cluster.Optional:
role
Sets the role for the host in the cluster. Possible values are
master
,worker
, andauto-assign
. The default value isauto-assign
.hostname
Sets the host name for the host. Optional if the host is automatically assigned a valid host name, for example by using DHCP.
approved
Indicates if the host can be installed as an OpenShift node. This property is a boolean with a default value of
False
. If you booted the host manually and are not using the bare metal operator automation, you must set this property toTrue
before installing the host.installation_disk_id
The ID of the installation disk you chose that is visible in the inventory of the host.
installerArgs
A JSON-formatted string containing overrides for the coreos-installer arguments of the host. You can use this property to modify kernel arguments. See the following example syntax:
["--append-karg", "ip=192.0.2.2::192.0.2.254:255.255.255.0:core0.example.com:enp1s0:none", "--save-partindex", "4"]
ignitionConfigOverrides
A JSON-formatted string containing overrides for the ignition configuration of the host. You can use this property to add files to the host by using ignition. See the following example syntax:
{"ignition": "version": "3.1.0"}, "storage": {"files": [{"path": "/tmp/example", "contents": {"source": "data:text/plain;base64,aGVscGltdHJhcHBlZGluYXN3YWdnZXJzcGVj"}}]}}
nodeLabels
A list of labels that are applied to the node after the host is installed.
The status
of an Agent
resource has the following properties:
role
Sets the role for the host in the cluster. If you previously set a
role
in theAgent
resource, the value appears in thestatus
.inventory
Contains host properties that the agent running on the host discovers.
progress
The host installation progress.
ntpSources
The configured Network Time Protocol (NTP) sources of the host.
conditions
Contains the following standard Kubernetes conditions with a
True
orFalse
value:-
SpecSynced:
True
if all specified properties are successfully applied.False
if some error was encountered. -
Connected:
True
if the agent connection to the installation service is not obstructed.False
if the agent has not contacted the installation service in some time. -
RequirementsMet:
True
if the host is ready to begin the installation. -
Validated:
True
if all host validations pass. -
Installed:
True
if the host is installed as an OpenShift node. -
Bound:
True
if the host is bound to a cluster. -
Cleanup:
False
if the request to delete theAgent
resouce fails.
-
SpecSynced:
debugInfo
Contains URLs for downloading installation logs and events.
validationsInfo
Contains information about validations that the agent runs after the host is discovered to ensure that the installation is successful. Troubleshoot if the value is
False
.installation_disk_id
The ID of the installation disk you chose that is visible in the inventory of the host.
1.9.8.3. Additional resources
1.10. APIs
You can access the following APIs for cluster lifecycle management with the multicluster engine operator. User required access: You can only perform actions that your role is assigned.
Note: You can also access all APIs from the integrated console. From the local-cluster
view, navigate to Home > API Explorer to explore API groups.
For more information, review the API documentation for each of the following resources:
1.10.1. Clusters API
1.10.1.1. Overview
This documentation is for the cluster resource for multicluster engine for Kubernetes operator. Cluster resource has four possible requests: create, query, delete and update.
1.10.1.1.1. URI scheme
BasePath : /kubernetes/apis
Schemes : HTTPS
1.10.1.1.2. Tags
- cluster.open-cluster-management.io : Create and manage clusters
1.10.1.2. Paths
1.10.1.2.1. Query all clusters
GET /cluster.open-cluster-management.io/v1/managedclusters
1.10.1.2.1.1. Description
Query your clusters for more details.
1.10.1.2.1.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
1.10.1.2.1.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.1.2.1.4. Consumes
-
cluster/yaml
1.10.1.2.1.5. Tags
- cluster.open-cluster-management.io
1.10.1.2.2. Create a cluster
POST /cluster.open-cluster-management.io/v1/managedclusters
1.10.1.2.2.1. Description
Create a cluster
1.10.1.2.2.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Body |
body | Parameters describing the cluster to be created. |
1.10.1.2.2.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.1.2.2.4. Consumes
-
cluster/yaml
1.10.1.2.2.5. Tags
- cluster.open-cluster-management.io
1.10.1.2.2.6. Example HTTP request
1.10.1.2.2.6.1. Request body
{ "apiVersion" : "cluster.open-cluster-management.io/v1", "kind" : "ManagedCluster", "metadata" : { "labels" : { "vendor" : "OpenShift" }, "name" : "cluster1" }, "spec": { "hubAcceptsClient": true, "managedClusterClientConfigs": [ { "caBundle": "test", "url": "https://test.com" } ] }, "status" : { } }
1.10.1.2.3. Query a single cluster
GET /cluster.open-cluster-management.io/v1/managedclusters/{cluster_name}
1.10.1.2.3.1. Description
Query a single cluster for more details.
1.10.1.2.3.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
cluster_name | Name of the cluster that you want to query. | string |
1.10.1.2.3.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.1.2.3.4. Tags
- cluster.open-cluster-management.io
1.10.1.2.4. Delete a cluster
DELETE /cluster.open-cluster-management.io/v1/managedclusters/{cluster_name}
1.10.1.2.4.1. Description
Delete a single cluster
1.10.1.2.4.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
cluster_name | Name of the cluster that you want to delete. | string |
1.10.1.2.4.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.1.2.4.4. Tags
- cluster.open-cluster-management.io
1.10.1.3. Definitions
1.10.1.3.1. Cluster
Name | Schema |
---|---|
apiVersion | string |
kind | string |
metadata | object |
spec |
spec
Name | Schema |
---|---|
hubAcceptsClient | bool |
managedClusterClientConfigs | < managedClusterClientConfigs > array |
leaseDurationSeconds | integer (int32) |
managedClusterClientConfigs
Name | Description | Schema |
---|---|---|
URL | string | |
CABundle | Pattern : "^(?:[A-Za-z0-9+/]{4})*(?:[A-Za-z0-9+/]{2}==|[A-Za-z0-9+/]{3}=)?$" | string (byte) |
1.10.2. Clustersets API (v1beta2)
1.10.2.1. Overview
This documentation is for the Clusterset resource for multicluster engine for Kubernetes operator. Clusterset resource has four possible requests: create, query, delete and update.
1.10.2.1.1. URI scheme
BasePath : /kubernetes/apis
Schemes : HTTPS
1.10.2.1.2. Tags
- cluster.open-cluster-management.io : Create and manage Clustersets
1.10.2.2. Paths
1.10.2.2.1. Query all clustersets
GET /cluster.open-cluster-management.io/v1beta2/managedclustersets
1.10.2.2.1.1. Description
Query your Clustersets for more details.
1.10.2.2.1.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
1.10.2.2.1.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.2.2.1.4. Consumes
-
clusterset/yaml
1.10.2.2.1.5. Tags
- cluster.open-cluster-management.io
1.10.2.2.2. Create a clusterset
POST /cluster.open-cluster-management.io/v1beta2/managedclustersets
1.10.2.2.2.1. Description
Create a Clusterset.
1.10.2.2.2.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Body |
body | Parameters describing the clusterset to be created. |
1.10.2.2.2.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.2.2.2.4. Consumes
-
clusterset/yaml
1.10.2.2.2.5. Tags
- cluster.open-cluster-management.io
1.10.2.2.2.6. Example HTTP request
1.10.2.2.2.6.1. Request body
{ "apiVersion" : "cluster.open-cluster-management.io/v1beta2", "kind" : "ManagedClusterSet", "metadata" : { "name" : "clusterset1" }, "spec": { }, "status" : { } }
1.10.2.2.3. Query a single clusterset
GET /cluster.open-cluster-management.io/v1beta2/managedclustersets/{clusterset_name}
1.10.2.2.3.1. Description
Query a single clusterset for more details.
1.10.2.2.3.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
clusterset_name | Name of the clusterset that you want to query. | string |
1.10.2.2.3.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.2.2.3.4. Tags
- cluster.open-cluster-management.io
1.10.2.2.4. Delete a clusterset
DELETE /cluster.open-cluster-management.io/v1beta2/managedclustersets/{clusterset_name}
1.10.2.2.4.1. Description
Delete a single clusterset.
1.10.2.2.4.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
clusterset_name | Name of the clusterset that you want to delete. | string |
1.10.2.2.4.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.2.2.4.4. Tags
- cluster.open-cluster-management.io
1.10.2.3. Definitions
1.10.2.3.1. Clusterset
Name | Schema |
---|---|
apiVersion | string |
kind | string |
metadata | object |
1.10.3. Clustersetbindings API (v1beta2)
1.10.3.1. Overview
This documentation is for the clustersetbinding resource for multicluster engine for Kubernetes. Clustersetbinding resource has four possible requests: create, query, delete and update.
1.10.3.1.1. URI scheme
BasePath : /kubernetes/apis
Schemes : HTTPS
1.10.3.1.2. Tags
- cluster.open-cluster-management.io : Create and manage clustersetbindings
1.10.3.2. Paths
1.10.3.2.1. Query all clustersetbindings
GET /cluster.open-cluster-management.io/v1beta2/namespaces/{namespace}/managedclustersetbindings
1.10.3.2.1.1. Description
Query your clustersetbindings for more details.
1.10.3.2.1.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
namespace | Namespace that you want to use, for example, default. | string |
1.10.3.2.1.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.3.2.1.4. Consumes
-
clustersetbinding/yaml
1.10.3.2.1.5. Tags
- cluster.open-cluster-management.io
1.10.3.2.2. Create a clustersetbinding
POST /cluster.open-cluster-management.io/v1beta2/namespaces/{namespace}/managedclustersetbindings
1.10.3.2.2.1. Description
Create a clustersetbinding.
1.10.3.2.2.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
namespace | Namespace that you want to use, for example, default. | string |
Body |
body | Parameters describing the clustersetbinding to be created. |
1.10.3.2.2.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.3.2.2.4. Consumes
-
clustersetbinding/yaml
1.10.3.2.2.5. Tags
- cluster.open-cluster-management.io
1.10.3.2.2.6. Example HTTP request
1.10.3.2.2.6.1. Request body
{ "apiVersion" : "cluster.open-cluster-management.io/v1", "kind" : "ManagedClusterSetBinding", "metadata" : { "name" : "clusterset1", "namespace" : "ns1" }, "spec": { "clusterSet": "clusterset1" }, "status" : { } }
1.10.3.2.3. Query a single clustersetbinding
GET /cluster.open-cluster-management.io/v1beta2/namespaces/{namespace}/managedclustersetbindings/{clustersetbinding_name}
1.10.3.2.3.1. Description
Query a single clustersetbinding for more details.
1.10.3.2.3.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
namespace | Namespace that you want to use, for example, default. | string |
Path |
clustersetbinding_name | Name of the clustersetbinding that you want to query. | string |
1.10.3.2.3.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.3.2.3.4. Tags
- cluster.open-cluster-management.io
1.10.3.2.4. Delete a clustersetbinding
DELETE /cluster.open-cluster-management.io/v1beta2/managedclustersetbindings/{clustersetbinding_name}
1.10.3.2.4.1. Description
Delete a single clustersetbinding.
1.10.3.2.4.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
namespace | Namespace that you want to use, for example, default. | string |
Path |
clustersetbinding_name | Name of the clustersetbinding that you want to delete. | string |
1.10.3.2.4.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.3.2.4.4. Tags
- cluster.open-cluster-management.io
1.10.3.3. Definitions
1.10.3.3.1. Clustersetbinding
Name | Schema |
---|---|
apiVersion | string |
kind | string |
metadata | object |
spec |
spec
Name | Schema |
---|---|
clusterSet | string |
1.10.4. Clusterview API (v1alpha1)
1.10.4.1. Overview
This documentation is for the clusterview
resource for multicluster engine for Kubernetes. The clusterview
resource provides a CLI command that enables you to view a list of the managed clusters and managed cluster sets that that you can access. The three possible requests are: list, get, and watch.
1.10.4.1.1. URI scheme
BasePath : /kubernetes/apis
Schemes : HTTPS
1.10.4.1.2. Tags
- clusterview.open-cluster-management.io : View a list of managed clusters that your ID can access.
1.10.4.2. Paths
1.10.4.2.1. Get managed clusters
GET /managedclusters.clusterview.open-cluster-management.io
1.10.4.2.1.1. Description
View a list of the managed clusters that you can access.
1.10.4.2.1.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
1.10.4.2.1.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.4.2.1.4. Consumes
-
managedcluster/yaml
1.10.4.2.1.5. Tags
- clusterview.open-cluster-management.io
1.10.4.2.2. List managed clusters
LIST /managedclusters.clusterview.open-cluster-management.io
1.10.4.2.2.1. Description
View a list of the managed clusters that you can access.
1.10.4.2.2.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Body |
body | Name of the user ID for which you want to list the managed clusters. | string |
1.10.4.2.2.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.4.2.2.4. Consumes
-
managedcluster/yaml
1.10.4.2.2.5. Tags
- clusterview.open-cluster-management.io
1.10.4.2.2.6. Example HTTP request
1.10.4.2.2.6.1. Request body
{ "apiVersion" : "clusterview.open-cluster-management.io/v1alpha1", "kind" : "ClusterView", "metadata" : { "name" : "<user_ID>" }, "spec": { }, "status" : { } }
1.10.4.2.3. Watch the managed cluster sets
WATCH /managedclusters.clusterview.open-cluster-management.io
1.10.4.2.3.1. Description
Watch the managed clusters that you can access.
1.10.4.2.3.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
clusterview_name | Name of the user ID that you want to watch. | string |
1.10.4.2.3.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.4.2.4. List the managed cluster sets.
GET /managedclustersets.clusterview.open-cluster-management.io
1.10.4.2.4.1. Description
List the managed clusters that you can access.
1.10.4.2.4.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
clusterview_name | Name of the user ID that you want to watch. | string |
1.10.4.2.4.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.4.2.5. List the managed cluster sets.
LIST /managedclustersets.clusterview.open-cluster-management.io
1.10.4.2.5.1. Description
List the managed clusters that you can access.
1.10.4.2.5.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
clusterview_name | Name of the user ID that you want to watch. | string |
1.10.4.2.5.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.4.2.6. Watch the managed cluster sets.
WATCH /managedclustersets.clusterview.open-cluster-management.io
1.10.4.2.6.1. Description
Watch the managed clusters that you can access.
1.10.4.2.6.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
clusterview_name | Name of the user ID that you want to watch. | string |
1.10.4.2.6.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.5. ManagedServiceAccount API (v1alpha1) (Deprecated)
1.10.5.1. Overview
This documentation is for the ManagedServiceAccount
resource for the multicluster engine operator. The ManagedServiceAccount
resource has four possible requests: create, query, delete, and update.
Deprecated: The v1alpha1
API is deprecated. For best results, use v1beta1
instead.
1.10.5.1.1. URI scheme
BasePath : /kubernetes/apis
Schemes : HTTPS
1.10.5.1.2. Tags
-
managedserviceaccounts.authentication.open-cluster-management.io`
: Create and manageManagedServiceAccounts
1.10.5.2. Paths
1.10.5.2.1. Create a ManagedServiceAccount
POST /authentication.open-cluster-management.io/v1beta1/managedserviceaccounts
1.10.5.2.1.1. Description
Create a ManagedServiceAccount
.
1.10.5.2.1.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Body |
body | Parameters describing the ManagedServiceAccount to be created. | ManagedServiceAccount |
1.10.5.2.1.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.5.2.1.4. Consumes
-
managedserviceaccount/yaml
1.10.5.2.1.5. Tags
- managedserviceaccounts.authentication.open-cluster-management.io
1.10.5.2.1.5.1. Request body
apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: annotations: controller-gen.kubebuilder.io/version: v0.14.0 name: managedserviceaccounts.authentication.open-cluster-management.io spec: group: authentication.open-cluster-management.io names: kind: ManagedServiceAccount listKind: ManagedServiceAccountList plural: managedserviceaccounts singular: managedserviceaccount scope: Namespaced versions: - deprecated: true deprecationWarning: authentication.open-cluster-management.io/v1alpha1 ManagedServiceAccount is deprecated; use authentication.open-cluster-management.io/v1beta1 ManagedServiceAccount; version v1alpha1 will be removed in the next release name: v1alpha1 schema: openAPIV3Schema: description: ManagedServiceAccount is the Schema for the managedserviceaccounts API properties: apiVersion: description: |- APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources type: string kind: description: |- Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds type: string metadata: type: object spec: description: ManagedServiceAccountSpec defines the desired state of ManagedServiceAccount properties: rotation: description: Rotation is the policy for rotation the credentials. properties: enabled: default: true description: |- Enabled prescribes whether the ServiceAccount token will be rotated from the upstream type: boolean validity: default: 8640h0m0s description: Validity is the duration for which the signed ServiceAccount token is valid. type: string type: object ttlSecondsAfterCreation: description: |- ttlSecondsAfterCreation limits the lifetime of a ManagedServiceAccount. If the ttlSecondsAfterCreation field is set, the ManagedServiceAccount will be automatically deleted regardless of the ManagedServiceAccount's status. When the ManagedServiceAccount is deleted, its lifecycle guarantees (e.g. finalizers) will be honored. If this field is unset, the ManagedServiceAccount won't be automatically deleted. If this field is set to zero, the ManagedServiceAccount becomes eligible for deletion immediately after its creation. In order to use ttlSecondsAfterCreation, the EphemeralIdentity feature gate must be enabled. exclusiveMinimum: true format: int32 minimum: 0 type: integer required: - rotation type: object status: description: ManagedServiceAccountStatus defines the observed state of ManagedServiceAccount properties: conditions: description: Conditions is the condition list. items: description: "Condition contains details for one aspect of the current state of this API Resource.\n---\nThis struct is intended for direct use as an array at the field path .status.conditions. For example,\n\n\n\ttype FooStatus struct{\n\t // Represents the observations of a foo's current state.\n\t // Known .status.conditions.type are: \"Available\", \"Progressing\", and \"Degraded\"\n\t // +patchMergeKey=type\n\t // +patchStrategy=merge\n\t // +listType=map\n\t \ // +listMapKey=type\n\t Conditions []metav1.Condition `json:\"conditions,omitempty\" patchStrategy:\"merge\" patchMergeKey:\"type\" protobuf:\"bytes,1,rep,name=conditions\"`\n\n\n\t \ // other fields\n\t}" properties: lastTransitionTime: description: |- lastTransitionTime is the last time the condition transitioned from one status to another. This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable. format: date-time type: string message: description: |- message is a human readable message indicating details about the transition. This may be an empty string. maxLength: 32768 type: string observedGeneration: description: |- observedGeneration represents the .metadata.generation that the condition was set based upon. For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date with respect to the current state of the instance. format: int64 minimum: 0 type: integer reason: description: |- reason contains a programmatic identifier indicating the reason for the condition's last transition. Producers of specific condition types may define expected values and meanings for this field, and whether the values are considered a guaranteed API. The value should be a CamelCase string. This field may not be empty. maxLength: 1024 minLength: 1 pattern: ^[A-Za-z]([A-Za-z0-9_,:]*[A-Za-z0-9_])?$ type: string status: description: status of the condition, one of True, False, Unknown. enum: - "True" - "False" - Unknown type: string type: description: |- type of condition in CamelCase or in foo.example.com/CamelCase. --- Many .condition.type values are consistent across resources like Available, but because arbitrary conditions can be useful (see .node.status.conditions), the ability to deconflict is important. The regex it matches is (dns1123SubdomainFmt/)?(qualifiedNameFmt) maxLength: 316 pattern: ^([a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*/)?(([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9])$ type: string required: - lastTransitionTime - message - reason - status - type type: object type: array expirationTimestamp: description: ExpirationTimestamp is the time when the token will expire. format: date-time type: string tokenSecretRef: description: |- TokenSecretRef is a reference to the corresponding ServiceAccount's Secret, which stores the CA certficate and token from the managed cluster. properties: lastRefreshTimestamp: description: |- LastRefreshTimestamp is the timestamp indicating when the token in the Secret is refreshed. format: date-time type: string name: description: Name is the name of the referenced secret. type: string required: - lastRefreshTimestamp - name type: object type: object type: object served: true storage: false subresources: status: {} - name: v1beta1 schema: openAPIV3Schema: description: ManagedServiceAccount is the Schema for the managedserviceaccounts API properties: apiVersion: description: |- APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources type: string kind: description: |- Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds type: string metadata: type: object spec: description: ManagedServiceAccountSpec defines the desired state of ManagedServiceAccount properties: rotation: description: Rotation is the policy for rotation the credentials. properties: enabled: default: true description: |- Enabled prescribes whether the ServiceAccount token will be rotated before it expires. Deprecated: All ServiceAccount tokens will be rotated before they expire regardless of this field. type: boolean validity: default: 8640h0m0s description: Validity is the duration of validity for requesting the signed ServiceAccount token. type: string type: object ttlSecondsAfterCreation: description: |- ttlSecondsAfterCreation limits the lifetime of a ManagedServiceAccount. If the ttlSecondsAfterCreation field is set, the ManagedServiceAccount will be automatically deleted regardless of the ManagedServiceAccount's status. When the ManagedServiceAccount is deleted, its lifecycle guarantees (e.g. finalizers) will be honored. If this field is unset, the ManagedServiceAccount won't be automatically deleted. If this field is set to zero, the ManagedServiceAccount becomes eligible for deletion immediately after its creation. In order to use ttlSecondsAfterCreation, the EphemeralIdentity feature gate must be enabled. exclusiveMinimum: true format: int32 minimum: 0 type: integer required: - rotation type: object status: description: ManagedServiceAccountStatus defines the observed state of ManagedServiceAccount properties: conditions: description: Conditions is the condition list. items: description: "Condition contains details for one aspect of the current state of this API Resource.\n---\nThis struct is intended for direct use as an array at the field path .status.conditions. For example,\n\n\n\ttype FooStatus struct{\n\t // Represents the observations of a foo's current state.\n\t // Known .status.conditions.type are: \"Available\", \"Progressing\", and \"Degraded\"\n\t // +patchMergeKey=type\n\t // +patchStrategy=merge\n\t // +listType=map\n\t \ // +listMapKey=type\n\t Conditions []metav1.Condition `json:\"conditions,omitempty\" patchStrategy:\"merge\" patchMergeKey:\"type\" protobuf:\"bytes,1,rep,name=conditions\"`\n\n\n\t \ // other fields\n\t}" properties: lastTransitionTime: description: |- lastTransitionTime is the last time the condition transitioned from one status to another. This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable. format: date-time type: string message: description: |- message is a human readable message indicating details about the transition. This may be an empty string. maxLength: 32768 type: string observedGeneration: description: |- observedGeneration represents the .metadata.generation that the condition was set based upon. For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date with respect to the current state of the instance. format: int64 minimum: 0 type: integer reason: description: |- reason contains a programmatic identifier indicating the reason for the condition's last transition. Producers of specific condition types may define expected values and meanings for this field, and whether the values are considered a guaranteed API. The value should be a CamelCase string. This field may not be empty. maxLength: 1024 minLength: 1 pattern: ^[A-Za-z]([A-Za-z0-9_,:]*[A-Za-z0-9_])?$ type: string status: description: status of the condition, one of True, False, Unknown. enum: - "True" - "False" - Unknown type: string type: description: |- type of condition in CamelCase or in foo.example.com/CamelCase. --- Many .condition.type values are consistent across resources like Available, but because arbitrary conditions can be useful (see .node.status.conditions), the ability to deconflict is important. The regex it matches is (dns1123SubdomainFmt/)?(qualifiedNameFmt) maxLength: 316 pattern: ^([a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*/)?(([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9])$ type: string required: - lastTransitionTime - message - reason - status - type type: object type: array expirationTimestamp: description: ExpirationTimestamp is the time when the token will expire. format: date-time type: string tokenSecretRef: description: |- TokenSecretRef is a reference to the corresponding ServiceAccount's Secret, which stores the CA certficate and token from the managed cluster. properties: lastRefreshTimestamp: description: |- LastRefreshTimestamp is the timestamp indicating when the token in the Secret is refreshed. format: date-time type: string name: description: Name is the name of the referenced secret. type: string required: - lastRefreshTimestamp - name type: object type: object type: object served: true storage: true subresources: status: {}
1.10.5.2.2. Query a single ManagedServiceAccount
GET /authentication.open-cluster-management.io/v1beta1/namespaces/{namespace}/managedserviceaccounts/{managedserviceaccount_name}
1.10.5.2.2.1. Description
Query a single ManagedServiceAccount
for more details.
1.10.5.2.2.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
managedserviceaccount_name |
Name of the | string |
1.10.5.2.2.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.5.2.2.4. Tags
- managedserviceaccounts.authentication.open-cluster-management.io
1.10.5.2.3. Delete a ManagedServiceAccount
DELETE /authentication.open-cluster-management.io/v1beta1/namespaces/{namespace}/managedserviceaccounts/{managedserviceaccount_name}
1.10.5.2.3.1. Description
Delete a single ManagedServiceAccount
.
1.10.5.2.3.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
managedserviceaccount_name |
Name of the | string |
1.10.5.2.3.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.5.2.3.4. Tags
- managedserviceaccounts.authentication.open-cluster-management.io
1.10.5.3. Definitions
1.10.5.3.1. ManagedServiceAccount
Name | Description | Schema |
---|---|---|
apiVersion |
The versioned schema of the | string |
kind | String value that represents the REST resource. | string |
metadata |
The meta data of the | object |
spec |
The specification of the |
1.10.6. MultiClusterEngine API (v1alpha1)
1.10.6.1. Overview
This documentation is for the MultiClusterEngine resource for multicluster engine for Kubernetes. The MultiClusterEngine
resource has four possible requests: create, query, delete, and update.
1.10.6.1.1. URI scheme
BasePath : /kubernetes/apis
Schemes : HTTPS
1.10.6.1.2. Tags
- multiclusterengines.multicluster.openshift.io : Create and manage MultiClusterEngines
1.10.6.2. Paths
1.10.6.2.1. Create a MultiClusterEngine
POST /apis/multicluster.openshift.io/v1alpha1/multiclusterengines
1.10.6.2.1.1. Description
Create a MultiClusterEngine.
1.10.6.2.1.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Body |
body | Parameters describing the MultiClusterEngine to be created. | MultiClusterEngine |
1.10.6.2.1.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.6.2.1.4. Consumes
-
MultiClusterEngines/yaml
1.10.6.2.1.5. Tags
- multiclusterengines.multicluster.openshift.io
1.10.6.2.1.5.1. Request body
{ "apiVersion": "apiextensions.k8s.io/v1", "kind": "CustomResourceDefinition", "metadata": { "annotations": { "controller-gen.kubebuilder.io/version": "v0.4.1" }, "creationTimestamp": null, "name": "multiclusterengines.multicluster.openshift.io" }, "spec": { "group": "multicluster.openshift.io", "names": { "kind": "MultiClusterEngine", "listKind": "MultiClusterEngineList", "plural": "multiclusterengines", "shortNames": [ "mce" ], "singular": "multiclusterengine" }, "scope": "Cluster", "versions": [ { "additionalPrinterColumns": [ { "description": "The overall state of the MultiClusterEngine", "jsonPath": ".status.phase", "name": "Status", "type": "string" }, { "jsonPath": ".metadata.creationTimestamp", "name": "Age", "type": "date" } ], "name": "v1alpha1", "schema": { "openAPIV3Schema": { "description": "MultiClusterEngine is the Schema for the multiclusterengines\nAPI", "properties": { "apiVersion": { "description": "APIVersion defines the versioned schema of this representation\nof an object. Servers should convert recognized schemas to the latest\ninternal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources", "type": "string" }, "kind": { "description": "Kind is a string value representing the REST resource this\nobject represents. Servers may infer this from the endpoint the client\nsubmits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds", "type": "string" }, "metadata": { "type": "object" }, "spec": { "description": "MultiClusterEngineSpec defines the desired state of MultiClusterEngine", "properties": { "imagePullSecret": { "description": "Override pull secret for accessing MultiClusterEngine\noperand and endpoint images", "type": "string" }, "nodeSelector": { "additionalProperties": { "type": "string" }, "description": "Set the nodeselectors", "type": "object" }, "targetNamespace": { "description": "Location where MCE resources will be placed", "type": "string" }, "tolerations": { "description": "Tolerations causes all components to tolerate any taints.", "items": { "description": "The pod this Toleration is attached to tolerates any\ntaint that matches the triple <key,value,effect> using the matching\noperator <operator>.", "properties": { "effect": { "description": "Effect indicates the taint effect to match. Empty\nmeans match all taint effects. When specified, allowed values\nare NoSchedule, PreferNoSchedule and NoExecute.", "type": "string" }, "key": { "description": "Key is the taint key that the toleration applies\nto. Empty means match all taint keys. If the key is empty,\noperator must be Exists; this combination means to match all\nvalues and all keys.", "type": "string" }, "operator": { "description": "Operator represents a key's relationship to the\nvalue. Valid operators are Exists and Equal. Defaults to Equal.\nExists is equivalent to wildcard for value, so that a pod\ncan tolerate all taints of a particular category.", "type": "string" }, "tolerationSeconds": { "description": "TolerationSeconds represents the period of time\nthe toleration (which must be of effect NoExecute, otherwise\nthis field is ignored) tolerates the taint. By default, it\nis not set, which means tolerate the taint forever (do not\nevict). Zero and negative values will be treated as 0 (evict\nimmediately) by the system.", "format": "int64", "type": "integer" }, "value": { "description": "Value is the taint value the toleration matches\nto. If the operator is Exists, the value should be empty,\notherwise just a regular string.", "type": "string" } }, "type": "object" }, "type": "array" } }, "type": "object" }, "status": { "description": "MultiClusterEngineStatus defines the observed state of MultiClusterEngine", "properties": { "components": { "items": { "description": "ComponentCondition contains condition information for\ntracked components", "properties": { "kind": { "description": "The resource kind this condition represents", "type": "string" }, "lastTransitionTime": { "description": "LastTransitionTime is the last time the condition\nchanged from one status to another.", "format": "date-time", "type": "string" }, "message": { "description": "Message is a human-readable message indicating\ndetails about the last status change.", "type": "string" }, "name": { "description": "The component name", "type": "string" }, "reason": { "description": "Reason is a (brief) reason for the condition's\nlast status change.", "type": "string" }, "status": { "description": "Status is the status of the condition. One of True,\nFalse, Unknown.", "type": "string" }, "type": { "description": "Type is the type of the cluster condition.", "type": "string" } }, "type": "object" }, "type": "array" }, "conditions": { "items": { "properties": { "lastTransitionTime": { "description": "LastTransitionTime is the last time the condition\nchanged from one status to another.", "format": "date-time", "type": "string" }, "lastUpdateTime": { "description": "The last time this condition was updated.", "format": "date-time", "type": "string" }, "message": { "description": "Message is a human-readable message indicating\ndetails about the last status change.", "type": "string" }, "reason": { "description": "Reason is a (brief) reason for the condition's\nlast status change.", "type": "string" }, "status": { "description": "Status is the status of the condition. One of True,\nFalse, Unknown.", "type": "string" }, "type": { "description": "Type is the type of the cluster condition.", "type": "string" } }, "type": "object" }, "type": "array" }, "phase": { "description": "Latest observed overall state", "type": "string" } }, "type": "object" } }, "type": "object" } }, "served": true, "storage": true, "subresources": { "status": {} } } ] }, "status": { "acceptedNames": { "kind": "", "plural": "" }, "conditions": [], "storedVersions": [] } }
1.10.6.2.2. Query all MultiClusterEngines
GET /apis/multicluster.openshift.io/v1alpha1/multiclusterengines
1.10.6.2.2.1. Description
Query your multicluster engine for more details.
1.10.6.2.2.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
1.10.6.2.2.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.6.2.2.4. Consumes
-
operator/yaml
1.10.6.2.2.5. Tags
- multiclusterengines.multicluster.openshift.io
1.10.6.2.3. Delete a MultiClusterEngine operator
DELETE /apis/multicluster.openshift.io/v1alpha1/multiclusterengines/{name}
1.10.6.2.3.1. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
name | Name of the multiclusterengine that you want to delete. | string |
1.10.6.2.3.2. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.6.2.3.3. Tags
- multiclusterengines.multicluster.openshift.io
1.10.6.3. Definitions
1.10.6.3.1. MultiClusterEngine
Name | Description | Schema |
---|---|---|
apiVersion | The versioned schema of the MultiClusterEngines. | string |
kind | String value that represents the REST resource. | string |
metadata | Describes rules that define the resource. | object |
spec | MultiClusterEngineSpec defines the desired state of MultiClusterEngine. | See List of specs |
1.10.6.3.2. List of specs
Name | Description | Schema |
---|---|---|
nodeSelector | Set the nodeselectors. | map[string]string |
imagePullSecret | Override pull secret for accessing MultiClusterEngine operand and endpoint images. | string |
tolerations | Tolerations causes all components to tolerate any taints. | []corev1.Toleration |
targetNamespace | Location where MCE resources will be placed. | string |
1.10.7. Placements API (v1beta1)
1.10.7.1. Overview
This documentation is for the Placement resource for multicluster engine for Kubernetes. Placement resource has four possible requests: create, query, delete and update.
1.10.7.1.1. URI scheme
BasePath : /kubernetes/apis
Schemes : HTTPS
1.10.7.1.2. Tags
- cluster.open-cluster-management.io : Create and manage Placements
1.10.7.2. Paths
1.10.7.2.1. Query all Placements
GET /cluster.open-cluster-management.io/v1beta1/namespaces/{namespace}/placements
1.10.7.2.1.1. Description
Query your Placements for more details.
1.10.7.2.1.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
1.10.7.2.1.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.7.2.1.4. Consumes
-
placement/yaml
1.10.7.2.1.5. Tags
- cluster.open-cluster-management.io
1.10.7.2.2. Create a Placement
POST /cluster.open-cluster-management.io/v1beta1/namespaces/{namespace}/placements
1.10.7.2.2.1. Description
Create a Placement.
1.10.7.2.2.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Body |
body | Parameters describing the placement to be created. |
1.10.7.2.2.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.7.2.2.4. Consumes
-
placement/yaml
1.10.7.2.2.5. Tags
- cluster.open-cluster-management.io
1.10.7.2.2.6. Example HTTP request
1.10.7.2.2.6.1. Request body
{ "apiVersion" : "cluster.open-cluster-management.io/v1beta1", "kind" : "Placement", "metadata" : { "name" : "placement1", "namespace": "ns1" }, "spec": { "predicates": [ { "requiredClusterSelector": { "labelSelector": { "matchLabels": { "vendor": "OpenShift" } } } } ] }, "status" : { } }
1.10.7.2.3. Query a single Placement
GET /cluster.open-cluster-management.io/v1beta1/namespaces/{namespace}/placements/{placement_name}
1.10.7.2.3.1. Description
Query a single Placement for more details.
1.10.7.2.3.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
placement_name | Name of the Placement that you want to query. | string |
1.10.7.2.3.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.7.2.3.4. Tags
- cluster.open-cluster-management.io
1.10.7.2.4. Delete a Placement
DELETE /cluster.open-cluster-management.io/v1beta1/namespaces/{namespace}/placements/{placement_name}
1.10.7.2.4.1. Description
Delete a single Placement.
1.10.7.2.4.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
placement_name | Name of the Placement that you want to delete. | string |
1.10.7.2.4.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.7.2.4.4. Tags
- cluster.open-cluster-management.io
1.10.7.3. Definitions
1.10.7.3.1. Placement
Name | Description | Schema |
---|---|---|
apiVersion | The versioned schema of the Placement. | string |
kind | String value that represents the REST resource. | string |
metadata | The meta data of the Placement. | object |
spec | The specification of the Placement. |
spec
Name | Description | Schema |
---|---|---|
ClusterSets | A subset of ManagedClusterSets from which the ManagedClusters are selected. If it is empty, ManagedClusters is selected from the ManagedClusterSets that are bound to the Placement namespace. Otherwise, ManagedClusters are selected from the intersection of this subset and the ManagedClusterSets are bound to the placement namespace. | string array |
numberOfClusters | The desired number of ManagedClusters to be selected. | integer (int32) |
predicates | A subset of cluster predicates to select ManagedClusters. The conditional logic is OR. | clusterPredicate array |
clusterPredicate
Name | Description | Schema |
---|---|---|
requiredClusterSelector | A cluster selector to select ManagedClusters with a label and cluster claim. |
clusterSelector
Name | Description | Schema |
---|---|---|
labelSelector | A selector of ManagedClusters by label. | object |
claimSelector | A selector of ManagedClusters by claim. |
clusterClaimSelector
Name | Description | Schema |
---|---|---|
matchExpressions | A subset of the cluster claim selector requirements. The conditional logic is AND. | < object > array |
1.10.8. PlacementDecisions API (v1beta1)
1.10.8.1. Overview
This documentation is for the PlacementDecision resource for multicluster engine for Kubernetes. PlacementDecision resource has four possible requests: create, query, delete and update.
1.10.8.1.1. URI scheme
BasePath : /kubernetes/apis
Schemes : HTTPS
1.10.8.1.2. Tags
- cluster.open-cluster-management.io : Create and manage PlacementDecisions.
1.10.8.2. Paths
1.10.8.2.1. Query all PlacementDecisions
GET /cluster.open-cluster-management.io/v1beta1/namespaces/{namespace}/placementdecisions
1.10.8.2.1.1. Description
Query your PlacementDecisions for more details.
1.10.8.2.1.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
1.10.8.2.1.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.8.2.1.4. Consumes
-
placementdecision/yaml
1.10.8.2.1.5. Tags
- cluster.open-cluster-management.io
1.10.8.2.2. Create a PlacementDecision
POST /cluster.open-cluster-management.io/v1beta1/namespaces/{namespace}/placementdecisions
1.10.8.2.2.1. Description
Create a PlacementDecision.
1.10.8.2.2.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Body |
body | Parameters describing the PlacementDecision to be created. |
1.10.8.2.2.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.8.2.2.4. Consumes
-
placementdecision/yaml
1.10.8.2.2.5. Tags
- cluster.open-cluster-management.io
1.10.8.2.2.6. Example HTTP request
1.10.8.2.2.6.1. Request body
{ "apiVersion" : "cluster.open-cluster-management.io/v1beta1", "kind" : "PlacementDecision", "metadata" : { "labels" : { "cluster.open-cluster-management.io/placement" : "placement1" }, "name" : "placement1-decision1", "namespace": "ns1" }, "status" : { } }
1.10.8.2.3. Query a single PlacementDecision
GET /cluster.open-cluster-management.io/v1beta1/namespaces/{namespace}/placementdecisions/{placementdecision_name}
1.10.8.2.3.1. Description
Query a single PlacementDecision for more details.
1.10.8.2.3.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
placementdecision_name | Name of the PlacementDecision that you want to query. | string |
1.10.8.2.3.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.8.2.3.4. Tags
- cluster.open-cluster-management.io
1.10.8.2.4. Delete a PlacementDecision
DELETE /cluster.open-cluster-management.io/v1beta1/namespaces/{namespace}/placementdecisions/{placementdecision_name}
1.10.8.2.4.1. Description
Delete a single PlacementDecision.
1.10.8.2.4.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
placementdecision_name | Name of the PlacementDecision that you want to delete. | string |
1.10.8.2.4.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.8.2.4.4. Tags
- cluster.open-cluster-management.io
1.10.8.3. Definitions
1.10.8.3.1. PlacementDecision
Name | Description | Schema |
---|---|---|
apiVersion | The versioned schema of PlacementDecision. | string |
kind | String value that represents the REST resource. | string |
metadata | The meta data of PlacementDecision. | object |
1.10.9. KlusterletConfig API (v1alpha1)
1.10.9.1. Overview
This documentation is for the KlusterletConfig
resource for the multicluster engine for Kubernetes operator. The KlusterletConfig
resource is used to configure the Klusterlet installation. The four possible requests are: create, query, delete, and update.
1.10.9.1.1. URI scheme
BasePath : /kubernetes/apis
Schemes : HTTPS
1.10.9.1.2. Tags
- klusterletconfigs.config.open-cluster-management.io : Create and manage klusterletconfigs
1.10.9.2. Paths
1.10.9.2.1. Query all KlusterletConfig
GET /config.open-cluster-management.io/v1alpha1/klusterletconfigs
1.10.9.2.1.1. Description
Query all KlusterletConfig
for more details.
1.10.9.2.1.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
1.10.9.2.1.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | KlusterletConfig yaml |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.9.2.1.4. Consumes
-
klusterletconfig/yaml
1.10.9.2.1.5. Tags
-
klusterletconfigs.config.open-cluster-management.io
1.10.9.2.2. Create a KlusterletConfig
POST /config.open-cluster-management.io/v1alpha1/klusterletconfigs
1.10.9.2.2.1. Description
Create a KlusterletConfig
.
1.10.9.2.2.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Body |
body | Parameters describing the KlusterletConfig you want to create. |
1.10.9.2.2.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.9.2.2.4. Consumes
-
klusterletconfig/yaml
1.10.9.2.2.5. Tags
- klusterletconfigs.config.open-cluster-management.io
1.10.9.2.2.6. Example HTTP request
1.10.9.2.2.6.1. Request body
{ "apiVersion": "apiextensions.k8s.io/v1", "kind": "CustomResourceDefinition", "metadata": { "annotations": { "controller-gen.kubebuilder.io/version": "v0.7.0" }, "creationTimestamp": null, "name": "klusterletconfigs.config.open-cluster-management.io" }, "spec": { "group": "config.open-cluster-management.io", "names": { "kind": "KlusterletConfig", "listKind": "KlusterletConfigList", "plural": "klusterletconfigs", "singular": "klusterletconfig" }, "preserveUnknownFields": false, "scope": "Cluster", "versions": [ { "name": "v1alpha1", "schema": { "openAPIV3Schema": { "description": "KlusterletConfig contains the configuration of a klusterlet including the upgrade strategy, config overrides, proxy configurations etc.", "properties": { "apiVersion": { "description": "APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources", "type": "string" }, "kind": { "description": "Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds", "type": "string" }, "metadata": { "type": "object" }, "spec": { "description": "Spec defines the desired state of KlusterletConfig", "properties": { "appliedManifestWorkEvictionGracePeriod": { "description": "AppliedManifestWorkEvictionGracePeriod is the eviction grace period the work agent will wait before evicting the AppliedManifestWorks, whose corresponding ManifestWorks are missing on the hub cluster, from the managed cluster. If not present, the default value of the work agent will be used. If its value is set to \"INFINITE\", it means the AppliedManifestWorks will never been evicted from the managed cluster.", "pattern": "^([0-9]+(s|m|h))+$|^INFINITE$", "type": "string" }, "bootstrapKubeConfigs": { "description": "BootstrapKubeConfigSecrets is the list of secrets that reflects the Klusterlet.Spec.RegistrationConfiguration.BootstrapKubeConfigs.", "properties": { "localSecretsConfig": { "description": "LocalSecretsConfig include a list of secrets that contains the kubeconfigs for ordered bootstrap kubeconifigs. The secrets must be in the same namespace where the agent controller runs.", "properties": { "hubConnectionTimeoutSeconds": { "default": 600, "description": "HubConnectionTimeoutSeconds is used to set the timeout of connecting to the hub cluster. When agent loses the connection to the hub over the timeout seconds, the agent do a rebootstrap. By default is 10 mins.", "format": "int32", "minimum": 180, "type": "integer" }, "kubeConfigSecrets": { "description": "KubeConfigSecrets is a list of secret names. The secrets are in the same namespace where the agent controller runs.", "items": { "properties": { "name": { "description": "Name is the name of the secret.", "type": "string" } }, "type": "object" }, "type": "array" } }, "type": "object" }, "type": { "default": "None", "description": "Type specifies the type of priority bootstrap kubeconfigs. By default, it is set to None, representing no priority bootstrap kubeconfigs are set.", "enum": [ "None", "LocalSecrets" ], "type": "string" } }, "type": "object" }, "hubKubeAPIServerCABundle": { "description": "HubKubeAPIServerCABundle is the CA bundle to verify the server certificate of the hub kube API against. If not present, CA bundle will be determined with the logic below: 1). Use the certificate of the named certificate configured in APIServer/cluster if FQDN matches; 2). Otherwise use the CA certificates from kube-root-ca.crt ConfigMap in the cluster namespace; \n Deprecated and maintained for backward compatibility, use HubKubeAPIServerConfig.ServerVarificationStrategy and HubKubeAPIServerConfig.TrustedCABundles instead", "format": "byte", "type": "string" }, "hubKubeAPIServerConfig": { "description": "HubKubeAPIServerConfig specifies the settings required for connecting to the hub Kube API server. If this field is present, the below deprecated fields will be ignored: - HubKubeAPIServerProxyConfig - HubKubeAPIServerURL - HubKubeAPIServerCABundle", "properties": { "proxyURL": { "description": "ProxyURL is the URL to the proxy to be used for all requests made by client If an HTTPS proxy server is configured, you may also need to add the necessary CA certificates to TrustedCABundles.", "type": "string" }, "serverVerificationStrategy": { "description": "ServerVerificationStrategy is the strategy used for verifying the server certification; The value could be \"UseSystemTruststore\", \"UseAutoDetectedCABundle\", \"UseCustomCABundles\", empty. \n When this strategy is not set or value is empty; if there is only one klusterletConfig configured for a cluster, the strategy is eaual to \"UseAutoDetectedCABundle\", if there are more than one klusterletConfigs, the empty strategy will be overrided by other non-empty strategies.", "enum": [ "UseSystemTruststore", "UseAutoDetectedCABundle", "UseCustomCABundles" ], "type": "string" }, "trustedCABundles": { "description": "TrustedCABundles refers to a collection of user-provided CA bundles used for verifying the server certificate of the hub Kubernetes API If the ServerVerificationStrategy is set to \"UseSystemTruststore\", this field will be ignored. Otherwise, the CA certificates from the configured bundles will be appended to the klusterlet CA bundle.", "items": { "description": "CABundle is a user-provided CA bundle", "properties": { "caBundle": { "description": "CABundle refers to a ConfigMap with label \"import.open-cluster-management.io/ca-bundle\" containing the user-provided CA bundle The key of the CA data could be \"ca-bundle.crt\", \"ca.crt\", or \"tls.crt\".", "properties": { "name": { "description": "name is the metadata.name of the referenced config map", "type": "string" }, "namespace": { "description": "name is the metadata.namespace of the referenced config map", "type": "string" } }, "required": [ "name", "namespace" ], "type": "object" }, "name": { "description": "Name is the identifier used to reference the CA bundle; Do not use \"auto-detected\" as the name since it is the reserved name for the auto-detected CA bundle.", "type": "string" } }, "required": [ "caBundle", "name" ], "type": "object" }, "type": "array", "x-kubernetes-list-map-keys": [ "name" ], "x-kubernetes-list-type": "map" }, "url": { "description": "URL is the endpoint of the hub Kube API server. If not present, the .status.apiServerURL of Infrastructure/cluster will be used as the default value. e.g. `oc get infrastructure cluster -o jsonpath='{.status.apiServerURL}'`", "type": "string" } }, "type": "object" }, "hubKubeAPIServerProxyConfig": { "description": "HubKubeAPIServerProxyConfig holds proxy settings for connections between klusterlet/add-on agents on the managed cluster and the kube-apiserver on the hub cluster. Empty means no proxy settings is available. \n Deprecated and maintained for backward compatibility, use HubKubeAPIServerConfig.ProxyURL instead", "properties": { "caBundle": { "description": "CABundle is a CA certificate bundle to verify the proxy server. It will be ignored if only HTTPProxy is set; And it is required when HTTPSProxy is set and self signed CA certificate is used by the proxy server.", "format": "byte", "type": "string" }, "httpProxy": { "description": "HTTPProxy is the URL of the proxy for HTTP requests", "type": "string" }, "httpsProxy": { "description": "HTTPSProxy is the URL of the proxy for HTTPS requests HTTPSProxy will be chosen if both HTTPProxy and HTTPSProxy are set.", "type": "string" } }, "type": "object" }, "hubKubeAPIServerURL": { "description": "HubKubeAPIServerURL is the URL of the hub Kube API server. If not present, the .status.apiServerURL of Infrastructure/cluster will be used as the default value. e.g. `oc get infrastructure cluster -o jsonpath='{.status.apiServerURL}'` \n Deprecated and maintained for backward compatibility, use HubKubeAPIServerConfig.URL instead", "type": "string" }, "installMode": { "description": "InstallMode is the mode to install the klusterlet", "properties": { "noOperator": { "description": "NoOperator is the setting of klusterlet installation when install type is noOperator.", "properties": { "postfix": { "description": "Postfix is the postfix of the klusterlet name. The name of the klusterlet is \"klusterlet\" if it is not set, and \"klusterlet-{Postfix}\". The install namespace is \"open-cluster-management-agent\" if it is not set, and \"open-cluster-management-{Postfix}\".", "maxLength": 33, "pattern": "^[-a-z0-9]*[a-z0-9]$", "type": "string" } }, "type": "object" }, "type": { "default": "default", "description": "InstallModeType is the type of install mode.", "enum": [ "default", "noOperator" ], "type": "string" } }, "type": "object" }, "nodePlacement": { "description": "NodePlacement enables explicit control over the scheduling of the agent components. If the placement is nil, the placement is not specified, it will be omitted. If the placement is an empty object, the placement will match all nodes and tolerate nothing.", "properties": { "nodeSelector": { "additionalProperties": { "type": "string" }, "description": "NodeSelector defines which Nodes the Pods are scheduled on. The default is an empty list.", "type": "object" }, "tolerations": { "description": "Tolerations are attached by pods to tolerate any taint that matches the triple <key,value,effect> using the matching operator <operator>. The default is an empty list.", "items": { "description": "The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>.", "properties": { "effect": { "description": "Effect indicates the taint effect to match. Empty means match all taint effects. When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute.", "type": "string" }, "key": { "description": "Key is the taint key that the toleration applies to. Empty means match all taint keys. If the key is empty, operator must be Exists; this combination means to match all values and all keys.", "type": "string" }, "operator": { "description": "Operator represents a key's relationship to the value. Valid operators are Exists and Equal. Defaults to Equal. Exists is equivalent to wildcard for value, so that a pod can tolerate all taints of a particular category.", "type": "string" }, "tolerationSeconds": { "description": "TolerationSeconds represents the period of time the toleration (which must be of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, it is not set, which means tolerate the taint forever (do not evict). Zero and negative values will be treated as 0 (evict immediately) by the system.", "format": "int64", "type": "integer" }, "value": { "description": "Value is the taint value the toleration matches to. If the operator is Exists, the value should be empty, otherwise just a regular string.", "type": "string" } }, "type": "object" }, "type": "array" } }, "type": "object" }, "pullSecret": { "description": "PullSecret is the name of image pull secret.", "properties": { "apiVersion": { "description": "API version of the referent.", "type": "string" }, "fieldPath": { "description": "If referring to a piece of an object instead of an entire object, this string should contain a valid JSON/Go field access statement, such as desiredState.manifest.containers[2]. For example, if the object reference is to a container within a pod, this would take on a value like: \"spec.containers{name}\" (where \"name\" refers to the name of the container that triggered the event) or if no container name is specified \"spec.containers[2]\" (container with index 2 in this pod). This syntax is chosen only to have some well-defined way of referencing a part of an object. TODO: this design is not final and this field is subject to change in the future.", "type": "string" }, "kind": { "description": "Kind of the referent. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds", "type": "string" }, "name": { "description": "Name of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names", "type": "string" }, "namespace": { "description": "Namespace of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespaces/", "type": "string" }, "resourceVersion": { "description": "Specific resourceVersion to which this reference is made, if any. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistency", "type": "string" }, "uid": { "description": "UID of the referent. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#uids", "type": "string" } }, "type": "object", "x-kubernetes-map-type": "atomic" }, "registries": { "description": "Registries includes the mirror and source registries. The source registry will be replaced by the Mirror.", "items": { "properties": { "mirror": { "description": "Mirror is the mirrored registry of the Source. Will be ignored if Mirror is empty.", "type": "string" }, "source": { "description": "Source is the source registry. All image registries will be replaced by Mirror if Source is empty.", "type": "string" } }, "required": [ "mirror" ], "type": "object" }, "type": "array" } }, "type": "object" }, "status": { "description": "Status defines the observed state of KlusterletConfig", "type": "object" } }, "type": "object" } }, "served": true, "storage": true, "subresources": { "status": {} } } ] }, "status": { "acceptedNames": { "kind": "", "plural": "" }, "conditions": [], "storedVersions": [] } }
1.10.9.2.3. Query a single klusterletconfig
GET /config.open-cluster-management.io/v1alpha1/klusterletconfigs/{klusterletconfig_name}
1.10.9.2.3.1. Description
Query a single KlusterletConfig
for more details.
1.10.9.2.3.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
klusterletconfig_name | Name of the klusterletconfig that you want to query. | string |
1.10.9.2.3.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success |
|
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.9.2.3.4. Tags
- klusterletconfigs.config.open-cluster-management.io
1.10.9.2.4. Delete a klusterletconfig
DELETE /config.open-cluster-management.io/v1alpha1/klusterletconfigs/{klusterletconfig_name}
1.10.9.2.4.1. Description
Delete a single KlusterletConfig
.
1.10.9.2.4.2. Parameters
Type | Name | Description | Schema |
---|---|---|---|
Header |
COOKIE | Authorization: Bearer {ACCESS_TOKEN} ; ACCESS_TOKEN is the user access token. | string |
Path |
klusterletconfig_name | Name of the klusterletconfig that you want to delete. | string |
1.10.9.2.4.3. Responses
HTTP Code | Description | Schema |
---|---|---|
200 | Success | No Content |
403 | Access forbidden | No Content |
404 | Resource not found | No Content |
500 | Internal service error | No Content |
503 | Service unavailable | No Content |
1.10.9.2.4.4. Tags
- klusterletconfig.authentication.open-cluster-management.io
1.10.9.3. Definitions
1.10.9.3.1. klusterletconfig
Name | Description | Schema |
---|---|---|
apiVersion | The versioned schema of the klusterletconfig. | string |
kind | String value that represents the REST resource. | string |
metadata |
The meta data of the | object |
spec |
The specification of the |
1.11. Troubleshooting
Before using the Troubleshooting guide, you can run the oc adm must-gather
command to gather details, logs, and take steps in debugging issues. For more details, see Running the must-gather command to troubleshoot.
Additionally, check your role-based access. See multicluster engine operator Role-based access control for details.
1.11.1. Documented troubleshooting
View the list of troubleshooting topics for the multicluster engine operator:
Installation:
To view the main documentation for the installing tasks, see Installing and upgrading multicluster engine operator.
Cluster management:
To view the main documentation about managing your clusters, see Cluster lifecycle introduction.
- Troubleshooting adding day-two nodes to an existing cluster fails with pending user action
- Troubleshooting an offline cluster
- Troubleshooting a managed cluster import failure
- Reimporting cluster fails with unknown authority error
- Troubleshooting cluster with pending import status
- Troubleshooting imported clusters offline after certificate change
- Troubleshooting cluster status changing from offline to available
- Troubleshooting cluster creation on VMware vSphere
- Troubleshooting cluster in console with pending or failed status
- Troubleshooting Klusterlet with degraded conditions
- Namespace remains after deleting a cluster
- Auto-import-secret-exists error when importing a cluster
- Troubleshooting missing PlacementDecision after creating Placement
- Troubleshooting a discovery failure of bare metal hosts on Dell hardware
- Troubleshooting Minimal ISO boot failures
- Troubleshooting managed clusters Unknown on OpenShift Service on AWS with hosted control planes cluster
1.11.2. Running the must-gather command to troubleshoot
To get started with troubleshooting, learn about the troubleshooting scenarios for users to run the must-gather
command to debug the issues, then see the procedures to start using the command.
Required access: Cluster administrator
1.11.2.1. Must-gather scenarios
Scenario one: Use the Documented troubleshooting section to see if a solution to your problem is documented. The guide is organized by the major functions of the product.
With this scenario, you check the guide to see if your solution is in the documentation.
-
Scenario two: If your problem is not documented with steps to resolve, run the
must-gather
command and use the output to debug the issue. -
Scenario three: If you cannot debug the issue using your output from the
must-gather
command, then share your output with Red Hat Support.
1.11.2.2. Must-gather procedure
See the following procedure to start using the must-gather
command:
-
Learn about the
must-gather
command and install the prerequisites that you need at Gathering data about your cluster in the OpenShift Container Platform documentation. Log in to your cluster. For the usual use-case, you should run the
must-gather
while you are logged into your engine cluster.Note: If you want to check your managed clusters, find the
gather-managed.log
file that is located in thecluster-scoped-resources
directory:<your-directory>/cluster-scoped-resources/gather-managed.log>
Check for managed clusters that are not set
True
for the JOINED and AVAILABLE column. You can run themust-gather
command on those clusters that are not connected withTrue
status.- Add the multicluster engine for Kubernetes image that is used for gathering data and the directory. Run the following command:
oc adm must-gather --image=registry.redhat.io/multicluster-engine/must-gather-rhel9:v2.7 --dest-dir=<directory>
Go to your specified directory to see your output, which is organized in the following levels:
-
Two peer levels:
cluster-scoped-resources
andnamespace
resources. - Sub-level for each: API group for the custom resource definitions for both cluster-scope and namespace-scoped resources.
-
Next level for each: YAML file sorted by
kind
.
-
Two peer levels:
1.11.2.3. Must-gather in a disconnected environment
Complete the following steps to run the must-gather
command in a disconnected environment:
- In a disconnected environment, mirror the Red Hat operator catalog images into their mirror registry. For more information, see Install on disconnected networks.
-
Run the following command to extract logs, which reference the image from their mirror registry. Replace
sha256
with the current image:
REGISTRY=registry.example.com:5000 IMAGE=$REGISTRY/multicluster-engine/must-gather-rhel9@sha256:ff9f37eb400dc1f7d07a9b6f2da9064992934b69847d17f59e385783c071b9d8> oc adm must-gather --image=$IMAGE --dest-dir=./data
You can open a Jira bug for the product team here.
1.11.3. Troubleshooting: Adding day-two nodes to an existing cluster fails with pending user action
Adding a node, or scaling out, to your existing cluster that is created by the multicluster engine for Kubernetes operator with Zero Touch Provisioning or Host inventory create methods fails during installation. The installation process works correctly during the Discovery phase, but fails on the installation phase.
The configuration of the network is failing. From the hub cluster in the integrated console, you see a Pending
user action. In the description, you can see it failing on the rebooting step.
The error message about failing is not very accurate, since the agent that is running in the installing host cannot report information.
1.11.3.1. Symptom: Installation for day two workers fails
After the Discover phase, the host reboots to continue the installation, but it cannot configure the network. Check for the following symptoms and messages:
From the hub cluster in the integrated console, check for
Pending
user action on the adding node, with theRebooting
indicator:This host is pending user action. Host timed out when pulling ignition. Check the host console... Rebooting
From the Red Hat OpenShift Container Platform configuration managed cluster, check the
MachineConfigs
of the existing cluster. Check if any of theMachineConfigs
create any file on the following directories:-
/sysroot/etc/NetworkManager/system-connections/
-
/sysroot/etc/sysconfig/network-scripts/
-
-
From the terminal of the installing host, check the failing host for the following messages. You can use
journalctl
to see the log messages:
info: networking config is defined in the real root info: will not attempt to propagate initramfs networking
If you get the last message in the log, the networking configuration is not propagated because it already found an existing network configuration on the folders previously listed in the Symptom.
1.11.3.2. Resolving the problem: Recreate the node merging network configuration
Perform the following task to use a proper network configuration during the installation:
- Delete the node from your hub cluster.
- Repeat your previous process to install the node in the same way.
Create the
BareMetalHost
object of the node with the following annotation:"bmac.agent-install.openshift.io/installer-args": "[\"--append-karg\", \"coreos.force_persist_ip\"]"
The node starts the installation. After the Discovery phase, the node merges the network configuration between the changes on the existing cluster and the initial configuration.
1.11.4. Troubleshooting deletion failure of a hosted control plane cluster on the Agent platform
When you destroy a hosted control plane cluster on the Agent platform, all the back-end resources are normally deleted. If the machine resources are not deleted properly, a cluster deletion fails. In that case, you must manually remove the remaining machine resources.
1.11.4.1. Symptom: An error occurs when destroying a hosted control plane cluster
After you attempt to destroy the hosted control plane cluster on the Agent platform, the hcp destroy
command fails with the following error:
+
2024-02-22T09:56:19-05:00 ERROR HostedCluster deletion failed {"namespace": "clusters", "name": "hosted-0", "error": "context deadline exceeded"} 2024-02-22T09:56:19-05:00 ERROR Failed to destroy cluster {"error": "context deadline exceeded"}
1.11.4.2. Resolving the problem: Remove the remaining machine resources manually
Complete the following steps to destroy a hosted control plane cluster successfully on the Agent platform:
Run the following command to see the list of remaining machine resources by replacing
<hosted_cluster_namespace>
with the name of hosted cluster namespace:oc get machine -n <hosted_cluster_namespace>
See the following example output:
NAMESPACE NAME CLUSTER NODENAME PROVIDERID PHASE AGE VERSION clusters-hosted-0 hosted-0-9gg8b hosted-0-nhdbp Deleting 10h 4.14.0-rc.8
Run the following command to remove the
machine.cluster.x-k8s.io
finalizer attached to machine resources:oc edit machines -n <hosted_cluster_namespace>
Run the following command to verify you receive the
No resources found
message on your terminal:oc get agentmachine -n <hosted_cluster_namespace>
Run the following command to destroy a hosted control plane cluster on the Agent platform:
hcp destroy cluster agent --name <cluster_name>
Replace
<cluster_name>
with the name of your cluster.
1.11.5. Troubleshooting installation status stuck in installing or pending
When installing the multicluster engine operator, the MultiClusterEngine
remains in Installing
phase, or multiple pods maintain a Pending
status.
1.11.5.1. Symptom: Stuck in Pending status
More than ten minutes passed since you installed MultiClusterEngine
and one or more components from the status.components
field of the MultiClusterEngine
resource report ProgressDeadlineExceeded
. Resource constraints on the cluster might be the issue.
Check the pods in the namespace where MultiClusterEngine
was installed. You might see Pending
with a status similar to the following:
reason: Unschedulable message: '0/6 nodes are available: 3 Insufficient cpu, 3 node(s) had taint {node-role.kubernetes.io/master: }, that the pod didn't tolerate.'
In this case, the worker nodes resources are not sufficient in the cluster to run the product.
1.11.5.2. Resolving the problem: Adjust worker node sizing
If you have this problem, then your cluster needs to be updated with either larger or more worker nodes. See Sizing your cluster for guidelines on sizing your cluster.
1.11.6. Troubleshooting reinstallation failure
When reinstalling multicluster engine operator, the pods do not start.
1.11.6.1. Symptom: Reinstallation failure
If your pods do not start after you install the multicluster engine operator, it is often because items from a previous installation of multicluster engine operator were not removed correctly when it was uninstalled.
In this case, the pods do not start after completing the installation process.
1.11.6.2. Resolving the problem: Reinstallation failure
If you have this problem, complete the following steps:
- Run the uninstallation process to remove the current components by following the steps in Uninstalling.
- Install the Helm CLI binary version 3.2.0, or later, by following the instructions at Installing Helm.
-
Ensure that your Red Hat OpenShift Container Platform CLI is configured to run
oc
commands. See Getting started with the OpenShift CLI in the OpenShift Container Platform documentation for more information about how to configure theoc
commands. Copy the following script into a file:
#!/bin/bash MCE_NAMESPACE=<namespace> oc delete multiclusterengine --all oc delete apiservice v1.admission.cluster.open-cluster-management.io v1.admission.work.open-cluster-management.io oc delete crd discoveredclusters.discovery.open-cluster-management.io discoveryconfigs.discovery.open-cluster-management.io oc delete mutatingwebhookconfiguration ocm-mutating-webhook managedclustermutators.admission.cluster.open-cluster-management.io oc delete validatingwebhookconfiguration ocm-validating-webhook oc delete ns $MCE_NAMESPACE
Replace
<namespace>
in the script with the name of the namespace where multicluster engine operator was installed. Ensure that you specify the correct namespace, as the namespace is cleaned out and deleted.- Run the script to remove the artifacts from the previous installation.
- Run the installation. See Installing while connected online.
1.11.7. Troubleshooting an offline cluster
There are a few common causes for a cluster showing an offline status.
1.11.7.1. Symptom: Cluster status is offline
After you complete the procedure for creating a cluster, you cannot access it from the Red Hat Advanced Cluster Management console, and it shows a status of offline
.
1.11.7.2. Resolving the problem: Cluster status is offline
Determine if the managed cluster is available. You can check this in the Clusters area of the Red Hat Advanced Cluster Management console.
If it is not available, try restarting the managed cluster.
If the managed cluster status is still offline, complete the following steps:
-
Run the
oc get managedcluster <cluster_name> -o yaml
command on the hub cluster. Replace<cluster_name>
with the name of your cluster. -
Find the
status.conditions
section. -
Check the messages for
type: ManagedClusterConditionAvailable
and resolve any problems.
-
Run the
1.11.8. Troubleshooting a managed cluster import failure
If your cluster import fails, there are a few steps that you can take to determine why the cluster import failed.
1.11.8.1. Symptom: Imported cluster not available
After you complete the procedure for importing a cluster, you cannot access it from the console.
1.11.8.2. Resolving the problem: Imported cluster not available
There can be a few reasons why an imported cluster is not available after an attempt to import it. If the cluster import fails, complete the following steps, until you find the reason for the failed import:
On the hub cluster, run the following command to ensure that the import controller is running.
kubectl -n multicluster-engine get pods -l app=managedcluster-import-controller-v2
You should see two pods that are running. If either of the pods is not running, run the following command to view the log to determine the reason:
kubectl -n multicluster-engine logs -l app=managedcluster-import-controller-v2 --tail=-1
On the hub cluster, run the following command to determine if the managed cluster import secret was generated successfully by the import controller:
kubectl -n <managed_cluster_name> get secrets <managed_cluster_name>-import
If the import secret does not exist, run the following command to view the log entries for the import controller and determine why it was not created:
kubectl -n multicluster-engine logs -l app=managedcluster-import-controller-v2 --tail=-1 | grep importconfig-controller
On the hub cluster, if your managed cluster is
local-cluster
, provisioned by Hive, or has an auto-import secret, run the following command to check the import status of the managed cluster.kubectl get managedcluster <managed_cluster_name> -o=jsonpath='{range .status.conditions[*]}{.type}{"\t"}{.status}{"\t"}{.message}{"\n"}{end}' | grep ManagedClusterImportSucceeded
If the condition
ManagedClusterImportSucceeded
is nottrue
, the result of the command indicates the reason for the failure.- Check the Klusterlet status of the managed cluster for a degraded condition. See Troubleshooting Klusterlet with degraded conditions to find the reason that the Klusterlet is degraded.
1.11.9. Reimporting cluster fails with unknown authority error
If you experience a problem when reimporting a managed cluster to your multicluster engine operator hub cluster, follow the procedure to troubleshoot the problem.
1.11.9.1. Symptom: Reimporting cluster fails with unknown authority error
After you provision an OpenShift Container Platform cluster with multicluster engine operator, reimporting the cluster might fail with a x509: certificate signed by unknown authority
error when you change or add API server certificates to your OpenShift Container Platform cluster.
1.11.9.2. Identifying the problem: Reimporting cluster fails with unknown authority error
After failing to reimport your managed cluster, run the following command to get the import controller log on your multicluster engine operator hub cluster:
kubectl -n multicluster-engine logs -l app=managedcluster-import-controller-v2 -f
If the following error log appears, your managed cluster API server certificates might have changed:
ERROR Reconciler error {"controller": "clusterdeployment-controller", "object": {"name":"awscluster1","namespace":"awscluster1"}, "namespace": "awscluster1", "name": "awscluster1", "reconcileID": "a2cccf24-2547-4e26-95fb-f258a6710d80", "error": "Get \"https://api.awscluster1.dev04.red-chesterfield.com:6443/api?timeout=32s\": x509: certificate signed by unknown authority"}
To determine if your managed cluster API server certificates have changed, complete the following steps:
Run the following command to specify your managed cluster name by replacing
your-managed-cluster-name
with the name of your managed cluster:cluster_name=<your-managed-cluster-name>
Get your managed cluster
kubeconfig
secret name by running the following command:kubeconfig_secret_name=$(oc -n ${cluster_name} get clusterdeployments ${cluster_name} -ojsonpath='{.spec.clusterMetadata.adminKubeconfigSecretRef.name}')
Export
kubeconfig
to a new file by running the following commands:oc -n ${cluster_name} get secret ${kubeconfig_secret_name} -ojsonpath={.data.kubeconfig} | base64 -d > kubeconfig.old
export KUBECONFIG=kubeconfig.old
Get the namespace from your managed cluster with
kubeconfig
by running the following command:oc get ns
If you receive an error that resembles the following message, your cluster API server ceritificates have been changed and your kubeconfig
file is invalid.
Unable to connect to the server: x509: certificate signed by unknown authority
1.11.9.3. Resolving the problem: Reimporting cluster fails with unknown authority error
The managed cluster administrator must create a new valid kubeconfig
file for your managed cluster.
After creating a new kubeconfig
, complete the following steps to update the new kubeconfig
for your managed cluster:
Run the following commands to set your
kubeconfig
file path and cluster name. Replace<path_to_kubeconfig>
with the path to your newkubeconfig
file. Replace<managed_cluster_name>
with the name of your managed cluster:cluster_name=<managed_cluster_name> kubeconfig_file=<path_to_kubeconfig>
Run the following command to encode your new
kubeconfig
:kubeconfig=$(cat ${kubeconfig_file} | base64 -w0)
Note: On macOS, run the following command instead:
kubeconfig=$(cat ${kubeconfig_file} | base64)
Run the following command to define the
kubeconfig
json patch:kubeconfig_patch="[\{\"op\":\"replace\", \"path\":\"/data/kubeconfig\", \"value\":\"${kubeconfig}\"}, \{\"op\":\"replace\", \"path\":\"/data/raw-kubeconfig\", \"value\":\"${kubeconfig}\"}]"
Retrieve your administrator
kubeconfig
secret name from your managed cluster by running the following command:kubeconfig_secret_name=$(oc -n ${cluster_name} get clusterdeployments ${cluster_name} -ojsonpath='{.spec.clusterMetadata.adminKubeconfigSecretRef.name}')
Patch your administrator
kubeconfig
secret with your newkubeconfig
by running the following command:oc -n ${cluster_name} patch secrets ${kubeconfig_secret_name} --type='json' -p="${kubeconfig_patch}"
1.11.10. Troubleshooting cluster with pending import status
If you receive Pending import continually on the console of your cluster, follow the procedure to troubleshoot the problem.
1.11.10.1. Symptom: Cluster with pending import status
After importing a cluster by using the Red Hat Advanced Cluster Management console, the cluster appears in the console with a status of Pending import.
1.11.10.2. Identifying the problem: Cluster with pending import status
Run the following command on the managed cluster to view the Kubernetes pod names that are having the issue:
kubectl get pod -n open-cluster-management-agent | grep klusterlet-registration-agent
Run the following command on the managed cluster to find the log entry for the error:
kubectl logs <registration_agent_pod> -n open-cluster-management-agent
Replace registration_agent_pod with the pod name that you identified in step 1.
-
Search the returned results for text that indicates there was a networking connectivity problem. Example includes:
no such host
.
1.11.10.3. Resolving the problem: Cluster with pending import status
Retrieve the port number that is having the problem by entering the following command on the hub cluster:
oc get infrastructure cluster -o yaml | grep apiServerURL
Ensure that the hostname from the managed cluster can be resolved, and that outbound connectivity to the host and port is occurring.
If the communication cannot be established by the managed cluster, the cluster import is not complete. The cluster status for the managed cluster is Pending import.
1.11.11. Troubleshooting imported clusters offline after certificate change
Installing a custom apiserver
certificate is supported, but one or more clusters that were imported before you changed the certificate information can have an offline
status.
1.11.11.1. Symptom: Clusters offline after certificate change
After you complete the procedure for updating a certificate secret, one or more of your clusters that were online are now displaying an offline
status in the console.
1.11.11.2. Identifying the problem: Clusters offline after certificate change
After updating the information for a custom API server certificate, clusters that were imported and running before the new certificate are now in an offline
state.
The errors that indicate that the certificate is the problem are found in the logs for the pods in the open-cluster-management-agent
namespace of the offline managed cluster. The following examples are similar to the errors that are displayed in the logs:
See the following work-agent
log:
E0917 03:04:05.874759 1 manifestwork_controller.go:179] Reconcile work test-1-klusterlet-addon-workmgr fails with err: Failed to update work status with err Get "https://api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/namespaces/test-1/manifestworks/test-1-klusterlet-addon-workmgr": x509: certificate signed by unknown authority E0917 03:04:05.874887 1 base_controller.go:231] "ManifestWorkAgent" controller failed to sync "test-1-klusterlet-addon-workmgr", err: Failed to update work status with err Get "api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/namespaces/test-1/manifestworks/test-1-klusterlet-addon-workmgr": x509: certificate signed by unknown authority E0917 03:04:37.245859 1 reflector.go:127] k8s.io/client-go@v0.19.0/tools/cache/reflector.go:156: Failed to watch *v1.ManifestWork: failed to list *v1.ManifestWork: Get "api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/namespaces/test-1/manifestworks?resourceVersion=607424": x509: certificate signed by unknown authority
See the following registration-agent
log:
I0917 02:27:41.525026 1 event.go:282] Event(v1.ObjectReference{Kind:"Namespace", Namespace:"open-cluster-management-agent", Name:"open-cluster-management-agent", UID:"", APIVersion:"v1", ResourceVersion:"", FieldPath:""}): type: 'Normal' reason: 'ManagedClusterAvailableConditionUpdated' update managed cluster "test-1" available condition to "True", due to "Managed cluster is available" E0917 02:58:26.315984 1 reflector.go:127] k8s.io/client-go@v0.19.0/tools/cache/reflector.go:156: Failed to watch *v1beta1.CertificateSigningRequest: Get "https://api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/managedclusters?allowWatchBookmarks=true&fieldSelector=metadata.name%3Dtest-1&resourceVersion=607408&timeout=9m33s&timeoutSeconds=573&watch=true"": x509: certificate signed by unknown authority E0917 02:58:26.598343 1 reflector.go:127] k8s.io/client-go@v0.19.0/tools/cache/reflector.go:156: Failed to watch *v1.ManagedCluster: Get "https://api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/managedclusters?allowWatchBookmarks=true&fieldSelector=metadata.name%3Dtest-1&resourceVersion=607408&timeout=9m33s&timeoutSeconds=573&watch=true": x509: certificate signed by unknown authority E0917 02:58:27.613963 1 reflector.go:127] k8s.io/client-go@v0.19.0/tools/cache/reflector.go:156: Failed to watch *v1.ManagedCluster: failed to list *v1.ManagedCluster: Get "https://api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/managedclusters?allowWatchBookmarks=true&fieldSelector=metadata.name%3Dtest-1&resourceVersion=607408&timeout=9m33s&timeoutSeconds=573&watch=true"": x509: certificate signed by unknown authority
1.11.11.3. Resolving the problem: Clusters offline after certificate change
If your managed cluster is the local-cluster
or your managed cluster was created by multicluster engine operator, you must wait 10 minutes or longer to recover your managed cluster.
To recover your managed cluster immediately, you can delete your managed cluster import secret on the hub cluster and recover it by using multicluster engine operator. Run the following command:
oc delete secret -n <cluster_name> <cluster_name>-import
Replace <cluster_name>
with the name of the managed cluster that you want to recover.
If you want to recover a managed cluster that was imported by using multicluster engine operator, complete the following steps import the managed cluster again:
On the hub cluster, recreate the managed cluster import secret by running the following command:
oc delete secret -n <cluster_name> <cluster_name>-import
Replace
<cluster_name>
with the name of the managed cluster that you want to import.On the hub cluster, expose the managed cluster import secret to a YAML file by running the following command:
oc get secret -n <cluster_name> <cluster_name>-import -ojsonpath='{.data.import\.yaml}' | base64 --decode > import.yaml
Replace
<cluster_name>
with the name of the managed cluster that you want to import.On the managed cluster, apply the
import.yaml
file by running the following command:oc apply -f import.yaml
Note: The previous steps do not detach the managed cluster from the hub cluster. The steps update the required manifests with current settings on the managed cluster, including the new certificate information.
1.11.12. Troubleshooting cluster status changing from offline to available
The status of the managed cluster alternates between offline
and available
without any manual change to the environment or cluster.
1.11.12.1. Symptom: Cluster status changing from offline to available
When the network that connects the managed cluster to the hub cluster is unstable, the status of the managed cluster that is reported by the hub cluster cycles between offline
and available
.
1.11.12.2. Resolving the problem: Cluster status changing from offline to available
To attempt to resolve this issue, complete the following steps:
Edit your
ManagedCluster
specification on the hub cluster by entering the following command:oc edit managedcluster <cluster-name>
Replace cluster-name with the name of your managed cluster.
-
Increase the value of
leaseDurationSeconds
in yourManagedCluster
specification. The default value is 5 minutes, but that might not be enough time to maintain the connection with the network issues. Specify a greater amount of time for the lease. For example, you can raise the setting to 20 minutes.
1.11.13. Troubleshooting cluster creation on VMware vSphere
If you experience a problem when creating a Red Hat OpenShift Container Platform cluster on VMware vSphere, see the following troubleshooting information to see if one of them addresses your problem.
Note: Sometimes when the cluster creation process fails on VMware vSphere, the link is not enabled for you to view the logs. If this happens, you can identify the problem by viewing the log of the hive-controllers
pod. The hive-controllers
log is in the hive
namespace.
1.11.13.1. Managed cluster creation fails with certificate IP SAN error
1.11.13.1.1. Symptom: Managed cluster creation fails with certificate IP SAN error
After creating a new Red Hat OpenShift Container Platform cluster on VMware vSphere, the cluster fails with an error message that indicates a certificate IP SAN error.
1.11.13.1.2. Identifying the problem: Managed cluster creation fails with certificate IP SAN error
The deployment of the managed cluster fails and returns the following errors in the deployment log:
time="2020-08-07T15:27:55Z" level=error msg="Error: error setting up new vSphere SOAP client: Post https://147.1.1.1/sdk: x509: cannot validate certificate for xx.xx.xx.xx because it doesn't contain any IP SANs" time="2020-08-07T15:27:55Z" level=error
1.11.13.1.3. Resolving the problem: Managed cluster creation fails with certificate IP SAN error
Use the VMware vCenter server fully-qualified host name instead of the IP address in the credential. You can also update the VMware vCenter CA certificate to contain the IP SAN.
1.11.13.2. Managed cluster creation fails with unknown certificate authority
1.11.13.2.1. Symptom: Managed cluster creation fails with unknown certificate authority
After creating a new Red Hat OpenShift Container Platform cluster on VMware vSphere, the cluster fails because the certificate is signed by an unknown authority.
1.11.13.2.2. Identifying the problem: Managed cluster creation fails with unknown certificate authority
The deployment of the managed cluster fails and returns the following errors in the deployment log:
Error: error setting up new vSphere SOAP client: Post https://vspherehost.com/sdk: x509: certificate signed by unknown authority"
1.11.13.2.3. Resolving the problem: Managed cluster creation fails with unknown certificate authority
Ensure you entered the correct certificate from the certificate authority when creating the credential.
1.11.13.3. Managed cluster creation fails with expired certificate
1.11.13.3.1. Symptom: Managed cluster creation fails with expired certificate
After creating a new Red Hat OpenShift Container Platform cluster on VMware vSphere, the cluster fails because the certificate is expired or is not yet valid.
1.11.13.3.2. Identifying the problem: Managed cluster creation fails with expired certificate
The deployment of the managed cluster fails and returns the following errors in the deployment log:
x509: certificate has expired or is not yet valid
1.11.13.3.3. Resolving the problem: Managed cluster creation fails with expired certificate
Ensure that the time on your ESXi hosts is synchronized.
1.11.13.4. Managed cluster creation fails with insufficient privilege for tagging
1.11.13.4.1. Symptom: Managed cluster creation fails with insufficient privilege for tagging
After creating a new Red Hat OpenShift Container Platform cluster on VMware vSphere, the cluster fails because there is insufficient privilege to use tagging.
1.11.13.4.2. Identifying the problem: Managed cluster creation fails with insufficient privilege for tagging
The deployment of the managed cluster fails and returns the following errors in the deployment log:
time="2020-08-07T19:41:58Z" level=debug msg="vsphere_tag_category.category: Creating..." time="2020-08-07T19:41:58Z" level=error time="2020-08-07T19:41:58Z" level=error msg="Error: could not create category: POST https://vspherehost.com/rest/com/vmware/cis/tagging/category: 403 Forbidden" time="2020-08-07T19:41:58Z" level=error time="2020-08-07T19:41:58Z" level=error msg=" on ../tmp/openshift-install-436877649/main.tf line 54, in resource \"vsphere_tag_category\" \"category\":" time="2020-08-07T19:41:58Z" level=error msg=" 54: resource \"vsphere_tag_category\" \"category\" {"
1.11.13.4.3. Resolving the problem: Managed cluster creation fails with insufficient privilege for tagging
Ensure that your VMware vCenter required account privileges are correct. See Image registry removed during information for more information.
1.11.13.5. Managed cluster creation fails with invalid dnsVIP
1.11.13.5.1. Symptom: Managed cluster creation fails with invalid dnsVIP
After creating a new Red Hat OpenShift Container Platform cluster on VMware vSphere, the cluster fails because there is an invalid dnsVIP.
1.11.13.5.2. Identifying the problem: Managed cluster creation fails with invalid dnsVIP
If you see the following message when trying to deploy a new managed cluster with VMware vSphere, it is because you have an older OpenShift Container Platform release image that does not support VMware Installer Provisioned Infrastructure (IPI):
failed to fetch Master Machines: failed to load asset \\\"Install Config\\\": invalid \\\"install-config.yaml\\\" file: platform.vsphere.dnsVIP: Invalid value: \\\"\\\": \\\"\\\" is not a valid IP
1.11.13.5.3. Resolving the problem: Managed cluster creation fails with invalid dnsVIP
Select a release image from a later version of OpenShift Container Platform that supports VMware Installer Provisioned Infrastructure.
1.11.13.6. Managed cluster creation fails with incorrect network type
1.11.13.6.1. Symptom: Managed cluster creation fails with incorrect network type
After creating a new Red Hat OpenShift Container Platform cluster on VMware vSphere, the cluster fails because there is an incorrect network type specified.
1.11.13.6.2. Identifying the problem: Managed cluster creation fails with incorrect network type
If you see the following message when trying to deploy a new managed cluster with VMware vSphere, it is because you have an older OpenShift Container Platform image that does not support VMware Installer Provisioned Infrastructure (IPI):
time="2020-08-11T14:31:38-04:00" level=debug msg="vsphereprivate_import_ova.import: Creating..." time="2020-08-11T14:31:39-04:00" level=error time="2020-08-11T14:31:39-04:00" level=error msg="Error: rpc error: code = Unavailable desc = transport is closing" time="2020-08-11T14:31:39-04:00" level=error time="2020-08-11T14:31:39-04:00" level=error time="2020-08-11T14:31:39-04:00" level=fatal msg="failed to fetch Cluster: failed to generate asset \"Cluster\": failed to create cluster: failed to apply Terraform: failed to complete the change"
1.11.13.6.3. Resolving the problem: Managed cluster creation fails with incorrect network type
Select a valid VMware vSphere network type for the specified VMware cluster.
1.11.13.7. Managed cluster creation fails with an error processing disk changes
1.11.13.7.1. Symptom: Adding the VMware vSphere managed cluster fails due to an error processing disk changes
After creating a new Red Hat OpenShift Container Platform cluster on VMware vSphere, the cluster fails because there is an error when processing disk changes.
1.11.13.7.2. Identifying the problem: Adding the VMware vSphere managed cluster fails due to an error processing disk changes
A message similar to the following is displayed in the logs:
ERROR ERROR Error: error reconfiguring virtual machine: error processing disk changes post-clone: disk.0: ServerFaultCode: NoPermission: RESOURCE (vm-71:2000), ACTION (queryAssociatedProfile): RESOURCE (vm-71), ACTION (PolicyIDByVirtualDisk)
1.11.13.7.3. Resolving the problem: Adding the VMware vSphere managed cluster fails due to an error processing disk changes
Use the VMware vSphere client to give the user All privileges for Profile-driven Storage Privileges.
1.11.14. Troubleshooting cluster in console with pending or failed status
If you observe Pending status or Failed status in the console for a cluster you created, follow the procedure to troubleshoot the problem.
1.11.14.1. Symptom: Cluster in console with pending or failed status
After creating a new cluster by using the console, the cluster does not progress beyond the status of Pending or displays Failed status.
1.11.14.2. Identifying the problem: Cluster in console with pending or failed status
If the cluster displays Failed status, navigate to the details page for the cluster and follow the link to the logs provided. If no logs are found or the cluster displays Pending status, continue with the following procedure to check for logs:
Procedure 1
Run the following command on the hub cluster to view the names of the Kubernetes pods that were created in the namespace for the new cluster:
oc get pod -n <new_cluster_name>
Replace
new_cluster_name
with the name of the cluster that you created.If no pod that contains the string
provision
in the name is listed, continue with Procedure 2. If there is a pod withprovision
in the title, run the following command on the hub cluster to view the logs of that pod:oc logs <new_cluster_name_provision_pod_name> -n <new_cluster_name> -c hive
Replace
new_cluster_name_provision_pod_name
with the name of the cluster that you created, followed by the pod name that containsprovision
.- Search for errors in the logs that might explain the cause of the problem.
Procedure 2
If there is not a pod with
provision
in its name, the problem occurred earlier in the process. Complete the following procedure to view the logs:Run the following command on the hub cluster:
oc describe clusterdeployments -n <new_cluster_name>
Replace
new_cluster_name
with the name of the cluster that you created. For more information about cluster installation logs, see Gathering installation logs in the Red Hat OpenShift documentation.- See if there is additional information about the problem in the Status.Conditions.Message and Status.Conditions.Reason entries of the resource.
1.11.14.3. Resolving the problem: Cluster in console with pending or failed status
After you identify the errors in the logs, determine how to resolve the errors before you destroy the cluster and create it again.
The following example provides a possible log error of selecting an unsupported zone, and the actions that are required to resolve it:
No subnets provided for zones
When you created your cluster, you selected one or more zones within a region that are not supported. Complete one of the following actions when you recreate your cluster to resolve the issue:
- Select a different zone within the region.
- Omit the zone that does not provide the support, if you have other zones listed.
- Select a different region for your cluster.
After determining the issues from the log, destroy the cluster and recreate it.
See Creating clusters for more information about creating a cluster.
1.11.15. Troubleshooting Klusterlet with degraded conditions
The Klusterlet degraded conditions can help to diagnose the status of Klusterlet agents on managed cluster. If a Klusterlet is in the degraded condition, the Klusterlet agents on managed cluster might have errors that need to be troubleshooted. See the following information for Klusterlet degraded conditions that are set to True
.
1.11.15.1. Symptom: Klusterlet is in the degraded condition
After deploying a Klusterlet on managed cluster, the KlusterletRegistrationDegraded
or KlusterletWorkDegraded
condition displays a status of True.
1.11.15.2. Identifying the problem: Klusterlet is in the degraded condition
Run the following command on the managed cluster to view the Klusterlet status:
kubectl get klusterlets klusterlet -oyaml
-
Check
KlusterletRegistrationDegraded
orKlusterletWorkDegraded
to see if the condition is set toTrue
. Proceed to Resolving the problem for any degraded conditions that are listed.
1.11.15.3. Resolving the problem: Klusterlet is in the degraded condition
See the following list of degraded statuses and how you can attempt to resolve those issues:
-
If the
KlusterletRegistrationDegraded
condition with a status of True and the condition reason is: BootStrapSecretMissing, you need create a bootstrap secret onopen-cluster-management-agent
namespace. -
If the
KlusterletRegistrationDegraded
condition displays True and the condition reason is a BootstrapSecretError, or BootstrapSecretUnauthorized, then the current bootstrap secret is invalid. Delete the current bootstrap secret and recreate a valid bootstrap secret onopen-cluster-management-agent
namespace. -
If the
KlusterletRegistrationDegraded
andKlusterletWorkDegraded
displays True and the condition reason is HubKubeConfigSecretMissing, delete the Klusterlet and recreate it. -
If the
KlusterletRegistrationDegraded
andKlusterletWorkDegraded
displays True and the condition reason is: ClusterNameMissing, KubeConfigMissing, HubConfigSecretError, or HubConfigSecretUnauthorized, delete the hub cluster kubeconfig secret fromopen-cluster-management-agent
namespace. The registration agent will bootstrap again to get a new hub cluster kubeconfig secret. -
If the
KlusterletRegistrationDegraded
displays True and the condition reason is GetRegistrationDeploymentFailed or UnavailableRegistrationPod, you can check the condition message to get the problem details and attempt to resolve. -
If the
KlusterletWorkDegraded
displays True and the condition reason is GetWorkDeploymentFailed or UnavailableWorkPod, you can check the condition message to get the problem details and attempt to resolve.
1.11.16. Namespace remains after deleting a cluster
When you remove a managed cluster, the namespace is normally removed as part of the cluster removal process. In rare cases, the namespace remains with some artifacts in it. In that case, you must manually remove the namespace.
1.11.16.1. Symptom: Namespace remains after deleting a cluster
After removing a managed cluster, the namespace is not removed.
1.11.16.2. Resolving the problem: Namespace remains after deleting a cluster
Complete the following steps to remove the namespace manually:
Run the following command to produce a list of the resources that remain in the <cluster_name> namespace:
oc api-resources --verbs=list --namespaced -o name | grep -E '^secrets|^serviceaccounts|^managedclusteraddons|^roles|^rolebindings|^manifestworks|^leases|^managedclusterinfo|^appliedmanifestworks'|^clusteroauths' | xargs -n 1 oc get --show-kind --ignore-not-found -n <cluster_name>
Replace
cluster_name
with the name of the namespace for the cluster that you attempted to remove.Delete each identified resource on the list that does not have a status of
Delete
by entering the following command to edit the list:oc edit <resource_kind> <resource_name> -n <namespace>
Replace
resource_kind
with the kind of the resource. Replaceresource_name
with the name of the resource. Replacenamespace
with the name of the namespace of the resource.-
Locate the
finalizer
attribute in the in the metadata. -
Delete the non-Kubernetes finalizers by using the vi editor
dd
command. -
Save the list and exit the
vi
editor by entering the:wq
command. Delete the namespace by entering the following command:
oc delete ns <cluster-name>
Replace
cluster-name
with the name of the namespace that you are trying to delete.
1.11.17. Auto-import-secret-exists error when importing a cluster
Your cluster import fails with an error message that reads: auto import secret exists.
1.11.17.1. Symptom: Auto import secret exists error when importing a cluster
When importing a hive cluster for management, an auto-import-secret already exists
error is displayed.
1.11.17.2. Resolving the problem: Auto-import-secret-exists error when importing a cluster
This problem occurs when you attempt to import a cluster that was previously managed. When this happens, the secrets conflict when you try to reimport the cluster.
To work around this problem, complete the following steps:
To manually delete the existing
auto-import-secret
, run the following command on the hub cluster:oc delete secret auto-import-secret -n <cluster-namespace>
Replace
cluster-namespace
with the namespace of your cluster.- Import your cluster again by using the procedure in Cluster import introduction.
1.11.18. Troubleshooting missing PlacementDecision after creating Placement
If no PlacementDescision
is generated after creating a Placement
, follow the procedure to troubleshoot the problem.
1.11.18.1. Symptom: Missing PlacementDecision after creating Placement
After creating a Placement
, a PlacementDescision
is not automatically generated.
1.11.18.2. Resolving the problem: Missing PlacementDecision after creating Placement
To resolve the issue, complete the following steps:
Check the
Placement
conditions by running the following command:kubectl describe placement <placement-name>
Replace
placement-name
with the name of thePlacement
.The output might resemble the following example:
Name: demo-placement Namespace: default Labels: <none> Annotations: <none> API Version: cluster.open-cluster-management.io/v1beta1 Kind: Placement Status: Conditions: Last Transition Time: 2022-09-30T07:39:45Z Message: Placement configurations check pass Reason: Succeedconfigured Status: False Type: PlacementMisconfigured Last Transition Time: 2022-09-30T07:39:45Z Message: No valid ManagedClusterSetBindings found in placement namespace Reason: NoManagedClusterSetBindings Status: False Type: PlacementSatisfied Number Of Selected Clusters: 0
Check the output for the
Status
ofPlacementMisconfigured
andPlacementSatisfied
:-
If the
PlacementMisconfigured
Status
is true, yourPlacement
has configuration errors. Check the included message for more details on the configuration errors and how to resolve them. -
If the
PlacementSatisfied
Status
is false, no managed cluster satisfies yourPlacement
. Check the included message for more details and how to resolve the error. In the previous example, noManagedClusterSetBindings
were found in the placement namespace.
-
If the
You can check the score of each cluster in
Events
to find out why some clusters with lower scores are not selected. The output might resemble the following example:Name: demo-placement Namespace: default Labels: <none> Annotations: <none> API Version: cluster.open-cluster-management.io/v1beta1 Kind: Placement Events: Type Reason Age From Message ---- ------ ---- ---- ------- Normal DecisionCreate 2m10s placementController Decision demo-placement-decision-1 is created with placement demo-placement in namespace default Normal DecisionUpdate 2m10s placementController Decision demo-placement-decision-1 is updated with placement demo-placement in namespace default Normal ScoreUpdate 2m10s placementController cluster1:0 cluster2:100 cluster3:200 Normal DecisionUpdate 3s placementController Decision demo-placement-decision-1 is updated with placement demo-placement in namespace default Normal ScoreUpdate 3s placementController cluster1:200 cluster2:145 cluster3:189 cluster4:200
Note: The placement controller assigns a score and generates an event for each filtered
ManagedCluster
. The placement controller genereates a new event when the cluster score changes.
1.11.19. Troubleshooting a discovery failure of bare metal hosts on Dell hardware
If the discovery of bare metal hosts fails on Dell hardware, the Integrated Dell Remote Access Controller (iDRAC) is likely configured to not allow certificates from unknown certificate authorities.
1.11.19.1. Symptom: Discovery failure of bare metal hosts on Dell hardware
After you complete the procedure for discovering bare metal hosts by using the baseboard management controller, an error message similar to the following is displayed:
ProvisioningError 51s metal3-baremetal-controller Image provisioning failed: Deploy step deploy.deploy failed with BadRequestError: HTTP POST https://<bmc_address>/redfish/v1/Managers/iDRAC.Embedded.1/VirtualMedia/CD/Actions/VirtualMedia.InsertMedia returned code 400. Base.1.8.GeneralError: A general error has occurred. See ExtendedInfo for more information Extended information: [ {"Message": "Unable to mount remote share https://<ironic_address>/redfish/boot-<uuid>.iso.", 'MessageArgs': ["https://<ironic_address>/redfish/boot-<uuid>.iso"], "MessageArgs@odata.count": 1, "MessageId": "IDRAC.2.5.RAC0720", "RelatedProperties": ["#/Image"], "RelatedProperties@odata.count": 1, "Resolution": "Retry the operation.", "Severity": "Informational"} ]
1.11.19.2. Resolving the problem: Discovery failure of bare metal hosts on Dell hardware
The iDRAC is configured not to accept certificates from unknown certificate authorities.
To bypass the problem, disable the certificate verification on the baseboard management controller of the host iDRAC by completing the following steps:
- In the iDRAC console, navigate to Configuration > Virtual media > Remote file share.
-
Change the value of Expired or invalid certificate action to
Yes
.
1.11.20. Troubleshooting Minimal ISO boot failures
You might encounter issues when trying to boot a minimal ISO.
1.11.20.1. Symptom: Minimal ISO boot failures
The boot screen shows that the host has failed to download the root file system image.
1.11.20.2. Resolving the problem: Minimal ISO boot failures
See Troubleshooting minimal ISO boot failures in the Assisted Installer for OpenShift Container Platform} documentation to learn how to troubleshoot the issue.
1.11.21. Troubleshooting the RHCOS image mirroring
For hosted control planes on Red Hat OpenShift Virtualization in a disconnected environment, oc-mirror
fails to automatically mirror the Red Hat Enterprise Linux CoreOS (RHCOS) image to the internal registry. When you create your first hosted cluster, the Kubevirt virtual machine does not boot, because the boot image is not availble in the internal registry.
1.11.21.1. Symptom: oc-mirror fails to attempt the RHCOS image mirroring
The oc-mirror
plugin does not mirror the {op-system-first} image from the release payload to the internal registry.
1.11.21.2. Resolving the problem: oc-mirror fails to attempt the RHCOS image mirroring
To resolve this issue, manually mirror the RHCOS image to the internal registry. Complete the following steps:
Get the internal registry name by running the following command:
oc get imagecontentsourcepolicy -o json | jq -r '.items[].spec.repositoryDigestMirrors[0].mirrors[0]'
Get a payload image by running the following command:
oc get clusterversion version -ojsonpath='{.status.desired.image}'
Extract the
0000_50_installer_coreos-bootimages.yaml
file that contains boot images from your payload image on the hosted cluster. Replace<payload_image>
with the name of your payload image. Run the following command:oc image extract --file /release-manifests/0000_50_installer_coreos-bootimages.yaml <payload_image> --confirm
Get the RHCOS image by running the following command:
cat 0000_50_installer_coreos-bootimages.yaml | yq -r .data.stream | jq -r '.architectures.x86_64.images.kubevirt."digest-ref"'
Mirror the RHCOS image to your internal registry. Replace
<rhcos_image>
with your RHCOS image for example,quay.io/openshift-release-dev/ocp-v4.0-art-dev@sha256:d9643ead36b1c026be664c9c65c11433c6cdf71bfd93ba229141d134a4a6dd94
. Replace<internal_registry>
with the name of your internal registry, for example,virthost.ostest.test.metalkube.org:5000/localimages/ocp-v4.0-art-dev
. Run the following command:oc image mirror <rhcos_image> <internal_registry>
Create a YAML file named
rhcos-boot-kubevirt.yaml
that defines theImageDigestMirrorSet
object. See the following example configuration:apiVersion: config.openshift.io/v1 kind: ImageDigestMirrorSet metadata: name: rhcos-boot-kubevirt spec: repositoryDigestMirrors: - mirrors: - <rhcos_image_no_digest> 1 source: virthost.ostest.test.metalkube.org:5000/localimages/ocp-v4.0-art-dev 2
Apply the
rhcos-boot-kubevirt.yaml
file to create theImageDigestMirrorSet
object by running the following command:oc apply -f rhcos-boot-kubevirt.yaml
1.11.22. Troubleshooting: Returning non bare metal clusters to the late binding pool
If you are using late binding managed clusters without BareMetalHosts
, you must complete additional manual steps to destroy a late binding cluster and return the nodes back to the Discovery ISO.
1.11.22.1. Symptom: Returning non bare metal clusters to the late binding pool
For late binding managed clusters without BareMetalHosts
, removing cluster information does not automatically return all nodes to the Discovery ISO.
1.11.22.2. Resolving the problem: Returning non bare metal clusters to the late binding pool
To unbind the non bare metal nodes with late binding, complete the following steps:
- Remove the cluster information. See Removing a cluster from management to learn more.
- Clean the root disks.
- Reboot manually with the Discovery ISO.
1.11.23. Troubleshooting managed clusters Unknown on OpenShift Service on AWS with hosted control planes cluster
The status of all managed clusters on a OpenShift Service on AWS hosted clusters suddenly becomes Unknown
.
1.11.23.1. Symptom: All managed clusters are in Unknown status on OpenShift Service on AWS with hosted control planes cluster
When you check the klusterlet-agent
pod log in the open-cluster-management-agent
namespace on your managed cluster, you see an error that resembles the following:
E0809 18:45:29.450874 1 reflector.go:147] k8s.io/client-go@v0.29.4/tools/cache/reflector.go:229: Failed to watch *v1.CertificateSigningRequest: failed to list *v1.CertificateSigningRequest: Get "https://api.xxx.openshiftapps.com:443/apis/certificates.k8s.io/v1/certificatesigningrequests?limit=500&resourceVersion=0": tls: failed to verify certificate: x509: certificate signed by unknown authority
1.11.23.2. Resolving the problem: All managed clusters are in Unknown status on OpenShift Service on AWS with hosted control planes cluster
-
Create a
KlusterletConfig
resource with nameglobal
if it does not exist. Set the
spec.hubKubeAPIServerConfig.serverVerificationStrategy
toUseSystemTruststore
. See the following example:apiVersion: config.open-cluster-management.io/v1alpha1 kind: KlusterletConfig metadata: name: global spec: hubKubeAPIServerConfig: serverVerificationStrategy: UseSystemTruststore
Apply the resource by running the following command on the hub cluster. Replace
<filename>
with the name of your file:oc apply -f <filename>
The state of some managed clusters might recover. Continue with the process for managed clusters that remain in the
Unknown
status.Export and decode the
import.yaml `file from the hub cluster by running the following command on the hub cluster. Replace `<cluster_name>
with the name of your cluster.oc get secret <cluster_name>-import -n <cluster_name> -o jsonpath={.data.import\.yaml} | base64 --decode > <cluster_name>-import.yaml
Apply the file by running the following command on the managed cluster.
oc apply -f <cluster_name>-import.yaml