Troubleshooting

See the following procedure to start using the must-gather command:

Complete the following steps to run the must-gather command in a disconnected environment:

REGISTRY=registry.example.com:5000
IMAGE=$REGISTRY/rhacm2/acm-must-gather-rhel8@sha256:ff9f37eb400dc1f7d07a9b6f2da9064992934b69847d17f59e385783c071b9d8

oc adm must-gather --image=$IMAGE --dest-dir=./data

More than ten minutes passed since you installed MultiClusterHub and one or more components from the status.components field of the MultiClusterHub resource report ProgressDeadlineExceeded. Resource constraints on the cluster might be the issue.

Check the pods in the namespace where Multiclusterhub was installed. You might see Pending with a status similar to the following:

reason: Unschedulable
message: '0/6 nodes are available: 3 Insufficient cpu, 3 node(s) had taint {node-role.kubernetes.io/master:
        }, that the pod didn't tolerate.'

In this case, the worker nodes resources are not sufficient in the cluster to run the product.

If you have this problem, then your cluster needs to be updated with either larger or more worker nodes. See Sizing your cluster for guidelines on sizing your cluster.

If your pods do not start after you install Red Hat Advanced Cluster Management, it is likely that Red Hat Advanced Cluster Management was previously installed, and not all of the pieces were removed before you attempted this installation.

In this case, the pods do not start after completing the installation process.

If you have this problem, complete the following steps:

After you complete the procedure for creating a cluster, you cannot access it from the Red Hat Advanced Cluster Management console, and it shows a status of offline.

After you complete the procedure for importing a cluster, you cannot access it from the Red Hat Advanced Cluster Management for Kubernetes console.

There can be a few reasons why an imported cluster is not available after an attempt to import it. If the cluster import fails, complete the following steps, until you find the reason for the failed import:

After you provision an OpenShift Container Platform cluster with Red Hat Advanced Cluster Management, reimporting the cluster might fail with a x509: certificate signed by unknown authority error when you change or add API server certificates to your OpenShift Container Platform cluster.

After failing to reimport your managed cluster, run the following command to get the import controller log on your Red Hat Advanced Cluster Management hub cluster:

kubectl -n multicluster-engine logs -l app=managedcluster-import-controller-v2 -f

If the following error log appears, your managed cluster API server certificates might have changed:

ERROR Reconciler error {"controller": "clusterdeployment-controller", "object": {"name":"awscluster1","namespace":"awscluster1"}, "namespace": "awscluster1", "name": "awscluster1", "reconcileID": "a2cccf24-2547-4e26-95fb-f258a6710d80", "error": "Get \"https://api.awscluster1.dev04.red-chesterfield.com:6443/api?timeout=32s\": x509: certificate signed by unknown authority"}

To determine if your managed cluster API server certificates have changed, complete the following steps:

If you receive an error that resembles the following message, your cluster API server ceritificates have been changed and your kubeconfig file is invalid.

Unable to connect to the server: x509: certificate signed by unknown authority

The managed cluster administrator must create a new valid kubeconfig file for your managed cluster.

After creating a new kubeconfig, complete the following steps to update the new kubeconfig for your managed cluster:

After importing a cluster by using the Red Hat Advanced Cluster Management console, the cluster appears in the console with a status of Pending import.

An error log shows up when importing an OpenShift Container Platform cluster into Red Hat Advanced Cluster Management MultiClusterHub:

error log:
Warning: apiextensions.k8s.io/v1beta1 CustomResourceDefinition is deprecated in v1.16+, unavailable in v1.22+; use apiextensions.k8s.io/v1 CustomResourceDefinition
Error from server (AlreadyExists): error when creating "STDIN": customresourcedefinitions.apiextensions.k8s.io "klusterlets.operator.open-cluster-management.io" already exists
The cluster cannot be imported because its Klusterlet CRD already exists.
Either the cluster was already imported, or it was not detached completely during a previous detach process.
Detach the existing cluster before trying the import again."

Check if there are any Red Hat Advanced Cluster Management-related resources on the cluster that you want to import to new the Red Hat Advanced Cluster Management MultiClusterHub by running the following commands:

oc get all -n open-cluster-management-agent
oc get all -n open-cluster-management-agent-addon

Run the following commands to remove pre-existing resources:

oc delete namespaces open-cluster-management-agent open-cluster-management-agent-addon --wait=false
oc get crds | grep open-cluster-management.io | awk '{print $1}' | xargs oc delete crds --wait=false
oc get crds | grep open-cluster-management.io | awk '{print $1}' | xargs oc patch crds --type=merge -p '{"metadata":{"finalizers": []}}'

After you attempt to import a Red Hat OpenShift Container Platform version 3.11 cluster, the import fails with a log message that resembles the following content:

customresourcedefinition.apiextensions.k8s.io/klusterlets.operator.open-cluster-management.io configured
clusterrole.rbac.authorization.k8s.io/klusterlet configured
clusterrole.rbac.authorization.k8s.io/open-cluster-management:klusterlet-admin-aggregate-clusterrole configured
clusterrolebinding.rbac.authorization.k8s.io/klusterlet configured
namespace/open-cluster-management-agent configured
secret/open-cluster-management-image-pull-credentials unchanged
serviceaccount/klusterlet configured
deployment.apps/klusterlet unchanged
klusterlet.operator.open-cluster-management.io/klusterlet configured
Error from server (BadRequest): error when creating "STDIN": Secret in version "v1" cannot be handled as a Secret:
v1.Secret.ObjectMeta:
v1.ObjectMeta.TypeMeta: Kind: Data: decode base64: illegal base64 data at input byte 1313, error found in #10 byte of ...|dhruy45="},"kind":"|..., bigger context ...|tye56u56u568yuo7i67i67i67o556574i"},"kind":"Secret","metadata":{"annotations":{"kube|...

This often occurs because the installed version of the kubectl command-line tool is 1.11, or earlier. Run the following command to see which version of the kubectl command-line tool you are running:

kubectl version

If the returned data lists version 1.11, or earlier, complete one of the fixes in Resolving the problem: OpenShift Container Platform version 3.11 cluster import failure.

You can resolve this issue by completing one of the following procedures:

After you complete the procedure for updating a certificate secret, one or more of your clusters that were online are now displaying an offline status in the Red Hat Advanced Cluster Management for Kubernetes console.

After updating the information for a custom API server certificate, clusters that were imported and running before the new certificate are now in an offline state.

The errors that indicate that the certificate is the problem are found in the logs for the pods in the open-cluster-management-agent namespace of the offline managed cluster. The following examples are similar to the errors that are displayed in the logs:

Log of work-agent:

E0917 03:04:05.874759       1 manifestwork_controller.go:179] Reconcile work test-1-klusterlet-addon-workmgr fails with err: Failed to update work status with err Get "https://api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/namespaces/test-1/manifestworks/test-1-klusterlet-addon-workmgr": x509: certificate signed by unknown authority
E0917 03:04:05.874887       1 base_controller.go:231] "ManifestWorkAgent" controller failed to sync "test-1-klusterlet-addon-workmgr", err: Failed to update work status with err Get "api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/namespaces/test-1/manifestworks/test-1-klusterlet-addon-workmgr": x509: certificate signed by unknown authority
E0917 03:04:37.245859       1 reflector.go:127] k8s.io/client-go@v0.19.0/tools/cache/reflector.go:156: Failed to watch *v1.ManifestWork: failed to list *v1.ManifestWork: Get "api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/namespaces/test-1/manifestworks?resourceVersion=607424": x509: certificate signed by unknown authority

Log of registration-agent:

I0917 02:27:41.525026       1 event.go:282] Event(v1.ObjectReference{Kind:"Namespace", Namespace:"open-cluster-management-agent", Name:"open-cluster-management-agent", UID:"", APIVersion:"v1", ResourceVersion:"", FieldPath:""}): type: 'Normal' reason: 'ManagedClusterAvailableConditionUpdated' update managed cluster "test-1" available condition to "True", due to "Managed cluster is available"
E0917 02:58:26.315984       1 reflector.go:127] k8s.io/client-go@v0.19.0/tools/cache/reflector.go:156: Failed to watch *v1beta1.CertificateSigningRequest: Get "https://api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/managedclusters?allowWatchBookmarks=true&fieldSelector=metadata.name%3Dtest-1&resourceVersion=607408&timeout=9m33s&timeoutSeconds=573&watch=true"": x509: certificate signed by unknown authority
E0917 02:58:26.598343       1 reflector.go:127] k8s.io/client-go@v0.19.0/tools/cache/reflector.go:156: Failed to watch *v1.ManagedCluster: Get "https://api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/managedclusters?allowWatchBookmarks=true&fieldSelector=metadata.name%3Dtest-1&resourceVersion=607408&timeout=9m33s&timeoutSeconds=573&watch=true": x509: certificate signed by unknown authority
E0917 02:58:27.613963       1 reflector.go:127] k8s.io/client-go@v0.19.0/tools/cache/reflector.go:156: Failed to watch *v1.ManagedCluster: failed to list *v1.ManagedCluster: Get "https://api.aaa-ocp.dev02.location.com:6443/apis/cluster.management.io/v1/managedclusters?allowWatchBookmarks=true&fieldSelector=metadata.name%3Dtest-1&resourceVersion=607408&timeout=9m33s&timeoutSeconds=573&watch=true"": x509: certificate signed by unknown authority

To manually restore your clusters after updating your certificate information, complete the following steps for each managed cluster:

After removing a managed cluster, the namespace is not removed.

Complete the following steps to remove the namespace manually:

When importing a hive cluster for management, an auto-import-secret already exists error is displayed.

This problem occurs when you attempt to import a cluster that was previously managed by Red Hat Advanced Cluster Management. When this happens, the secrets conflict when you try to reimport the cluster.

To work around this problem, complete the following steps:

Your cluster is imported.

When the network that connects the managed cluster to the hub cluster is unstable, the status of the managed cluster that is reported by the hub cluster cycles between offline and available.

To attempt to resolve this issue, complete the following steps:

After creating a new cluster by using the Red Hat Advanced Cluster Management for Kubernetes console, the cluster does not progress beyond the status of Pending or displays Failed status.

If the cluster displays Failed status, navigate to the details page for the cluster and follow the link to the logs provided. If no logs are found or the cluster displays Pending status, continue with the following procedure to check for logs:

After you identify the errors in the logs, determine how to resolve the errors before you destroy the cluster and create it again.

The following example provides a possible log error of selecting an unsupported zone, and the actions that are required to resolve it:

No subnets provided for zones

When you created your cluster, you selected one or more zones within a region that are not supported. Complete one of the following actions when you recreate your cluster to resolve the issue:

After determining the issues from the log, destroy the cluster and recreate it.

See Creating a cluster for more information about creating a cluster.

The logs from the subscription controller pod multicluster-operators-hub-subscription-<random-characters> in the open-cluster-management namespace indicates that it fails to clone the Git repository. You receive a x509: certificate signed by unknown authority error, or BadGateway error.

Important: Upgrade if you are on a previous version.

oc get pod multicluster-operators-standalone-subscription-<random-characters> -n open-cluster-management -o yaml
oc get pod multicluster-operators-hub-subscription-<random-characters> -n open-cluster-management -o yaml

If you hit the Gateway Time-out error when you query some time-consuming metrics in the Grafana explorer, it is possible that the timeout is caused by the multicloud-console route in the open-cluster-management namespace.

If you have this problem, complete the following steps:

Refresh the Grafana page and try to query the metrics again. The Gateway Time-out error is no longer displayed.

All managed clusters are selected with a placement rule, but the local-cluster is not. The placement rule user is not granted permission to get the managedcluster resources in the local-cluster namespace.

To resolve this issue, you need to grant the managedcluster administrative permission in the local-cluster namespace. Complete the following steps:

If one or more of your application resources in the Subscription YAML file uses the deprecated API, you might receive an error similar to the following error:

failed to install release: unable to build kubernetes objects from release manifest: unable to recognize "": no matches for
kind "Deployment" in version "extensions/v1beta1"

Or with new Kubernetes API version in your YAML file named old.yaml for instance, you might receive the following error:

error: unable to recognize "old.yaml": no matches for kind "Deployment" in version "deployment/v1beta1"

When Operator Lifecycle Manager (OLM) deploys all operators, not only the multicluster-subscription-operator, the multicluster-operators-standalone-subscription pod restarts because not enough memory is allocated to the standalone subscription container.

The memory limit of the multicluster-operators-standalone-subscription pod was increased to 2GB in the multicluster subscription community operator CSV, but this resource limit setting is ignored by OLM.

After deploying a Klusterlet on managed cluster, the KlusterletRegistrationDegraded or KlusterletWorkDegraded condition displays a status of True.

See the following list of degraded statuses and how you can attempt to resolve those issues:

You receive an error for the klusterlet-addon-appmgr pod on Red Hat OpenShift Container Platform managed clusters version 4.5 and 4.6: OOMKilled.

For Red Hat Advanced Cluster Management for Kubernetes 2.1.x and 2.2, you need to manually increase the memory limit of the pod to 8Gb. See the following steps.

The subscription of an Object storage channel cannot pick up the updated secret automatically. This prevents the subscription operator from reconciliation and deploys resources from Object storage to the managed cluster.

You need to manually input the credentials to create a secret, then refer to the secret within a channel.

After you run the command, you can go to the Application console to verify that the resource is deployed to the managed cluster. Or you can log in to the managed cluster to see if the application resource is created at the given namespace.

If the observability status is stuck in an Installing status after you install and create the Observability custom resource definition (CRD), it is possible that there is no value defined for the spec:storageConfig:storageClass parameter. Alternatively, the observability component automatically finds the default storageClass, but if there is no value for the storage, the component remains stuck with the Installing status.

If you have this problem, complete the following steps:

storageclass.kubernetes.io/is-default-class: "true"

The observability component status is updated to a Ready status when the installation is complete. If the installation fails to complete, the Fail status is displayed.

The endpoint-observability-operator-x pod checks if the prometheus-k8s service is available in the openshift-monitoring namespace. If the service is not present in the openshift-monitoring namespace, then the metrics-collector is not deployed. You might receive the following error message: Failed to get prometheus resource.

If you have this problem, complete the following steps:

Search aggregator pods are in a Not Ready state if the redisgraph-user-secret is updated. You might receive the following error:

E0113 15:04:42.427931       1 pool.go:93] Error authenticating Redis client. Original error: ERR invalid password
W0113 15:04:42.428100       1 healthProbes.go:36] Unable to reach Redis.
E0113 15:04:44.265777       1 pool.go:93] Error authenticating Redis client. Original error: ERR invalid password
W0113 15:04:44.266003       1 healthProbes.go:36] Unable to reach Redis.
E0113 15:04:46.316869       1 pool.go:93] Error authenticating Redis client. Original error: ERR invalid password
W0113 15:04:46.317029       1 healthProbes.go:36] Unable to reach Redis.

If you have this problem, delete the search-aggregator and search-api pods to restart the pods. Run the following commands to delete the previously mentioned pods.

oc delete pod -n open-cluster-management <search-aggregator>

oc delete pod -n open-cluster-management <search-api>

The search-redisgraph pod fail to run when it is in Pending state.

If you have this problem complete the following steps:

There might be a managed cluster, where the metrics are unavailable. If this is the case, you might receive the following error from the metrics-collector deployment:

error: response status code is 500 Internal Server Error, response body is x509: certificate signed by unknown authority (possibly because of "crypto/rsa: verification error" while trying to verify candidate authority certificate "observability-client-ca-certificate")

If you have this problem, complete the following steps:

The metrics-collector deployment is recreated and the observability-controller-open-cluster-management.io-observability-signer-client-cert secret is updated.