Red Hat Summit Red Hat SummitSupportConsoleDevelopersStart a trialContact

Backup and restore

Red Hat Advanced Cluster Security for Kubernetes 4.3

Backing up and restoring Red Hat Advanced Cluster Security for Kubernetes

Red Hat OpenShift Documentation Team

Abstract

Describes how to back up the system and restore from a backup.

You can perform data backups for Red Hat Advanced Cluster Security for Kubernetes and use these for data restoration in case of an infrastructure disaster or corrupt data.

You can configure automatic backups for the Central database by integrating with Amazon S3 or Google Cloud Storage. You can perform on-demand backups of the Central database by using the roxctl CLI. You can also back up your Central deployment using RHACS Operator or Helm Chart installation methods.

Depending on your requirements, you can create two types of backups:

  1. A backup of the Central database: It includes RHACS configurations, resources, events, and certificates. In an unforeseen incident, such as database failure or data corruption, you can use the backup to recover and restore the Central database to its earlier functional state. Doing this ensures the availability and integrity of essential data, allowing you to continue normal operations without significant disruptions or loss of critical information.
  2. A backup of all custom deployment configurations: If you installed RHACS by using Helm charts or the RHACS Operator, you can back up settings, parameters, and customizations specific to your installation. When the RHACS installation gets accidentally deleted, or you need to migrate it to another cluster or namespace, having a backup of the deployment configurations enables a seamless recovery process. In addition, by restoring the custom settings from the backup, you can efficiently reinstate your Central installation’s unique requirements and configurations, ensuring consistent and exact deployment of the system.

Because backup files include secrets and certificates, you must securely store the backup files.

Backing up the Central database is critical to ensure data integrity and system reliability. Regular backups of the database, containing necessary configurations, resources, events, and certificates, protect against database failures, corruption, and accidental data loss.

You can use the roxctl CLI to take the backups by using the backup command. You require an API token or your administrator password to run this command.

Note

Red Hat supports backups for the Central database through integration with Amazon S3 or Google Cloud Storage.

Backing up to Amazon S3 API-compatible storage might work. However, Red Hat does not test and support Amazon S3 API-compatible storage for backing up RHACS. For example, see RHACS backup on MinIO.

1.1.1. On-demand backups by using an API token
Copy link

You can back up the entire database of RHACS by using an API token.

Prerequisites

  • You have an API token with the Admin role.
  • You have installed the roxctl CLI.

Procedure

  1. Set the ROX_API_TOKEN and the ROX_ENDPOINT environment variables by running the following commands: 

    $ export ROX_API_TOKEN=<api_token>
    Copy to Clipboard Toggle word wrap 
    $ export ROX_ENDPOINT=<address>:<port_number>
    Copy to Clipboard Toggle word wrap

  2. Initiate a backup for Central by running the following command: 

    $ roxctl central backup
    1
    Copy to Clipboard Toggle word wrap
    1
    You can use the --output option to specify the backup file location.

    By default, the roxctl CLI saves the backup file in the directory where you run the command.

You can back up the entire database of RHACS by using your administrator password.

Prerequisites

  • You have the administrator password.
  • You have installed the roxctl CLI.

Procedure

  1. Set the ROX_ENDPOINT environment variable by running the following command: 

    $ export ROX_ENDPOINT=<address>:<port_number>
    Copy to Clipboard Toggle word wrap

  2. Initiate a backup for Central by running the following command: 

    $ roxctl -p <admin_password> central backup
    1
    Copy to Clipboard Toggle word wrap
    1
    For <admin_password>, specify the administrator password.

    By default, the roxctl CLI saves the backup file in the directory in which you run the command. You can use the --output option to specify the backup file location.

1.2. Backing up Central deployment
Copy link

You can back up the deployment of a Central instance. This can be useful if you want to migrate central to another namespace or cluster by using the same configuration values.

Note

Red Hat does not support backing up deployment configurations by using the roxctl CLI. You can use the oc or kubectl CLI to back up manifests related to your Central instance and restore the configuration.

When you use the RHACS Operator to instal RHACS, OpenShift Container Platform stores all the custom configuration for your Central deployment within the Central custom resource. You can backup the Central custom resource, the central-tls secret, and the administrator password. The central-tls secret includes the certificates for authenticating with Secured clusters and signing API tokens.

Procedure

  1. Run the following command to save the Central custom resource in a YAML file: 

    $ oc get central -n _<central-namespace>_ _<central-name>_ -o yaml > central-cr.yaml
    Copy to Clipboard Toggle word wrap

  2. Run the following command to save central-tls in a JSON file: 

    $ oc get secret -n _<central-namespace>_ central-tls -o json | jq 'del(.metadata.ownerReferences)' > central-tls.json
    Copy to Clipboard Toggle word wrap

  3. Run the following command to the administrator password in a JSON file: 

    $ oc get secret -n _<central-namespace>_ central-htpasswd -o json | jq 'del(.metadata.ownerReferences)' > central-htpasswd.json
    Copy to Clipboard Toggle word wrap

1.2.2. Backing up deployment using Helm
Copy link

When you use the Helm chart to install RHACS, you store all the custom configuration for your Central deployment within the custom values that you apply to the Helm chart.

You can back up the custom values and save it in a YAML file.

Procedure

  • Run the following command to back up custom Helm chart values in a YAML file: 

    $ helm get values --all -n _<central-namespace>_ _<central-helm-release>_ -o yaml > central-values-backup.yaml
    Copy to Clipboard Toggle word wrap

Chapter 2. Restoring from a backup
Copy link

You can restore Red Hat Advanced Cluster Security for Kubernetes from an existing backup by using the roxctl command-line interface (CLI).

Depending upon your requirements and the data you have backed up, you can restore from the following types of backups:

  1. Restore Central database from the Central database backup: Use this to recover from a database failure or data corruption event. It allows you to restore and recover the Central database to its earlier functional state.
  2. Restore Central from the Central deployment backup: Use this if you are migrating Central to another cluster or namespace. This option restores the configurations of your Central installation.

You can use the roxctl CLI to restore Red Hat Advanced Cluster Security for Kubernetes by using the restore command. You require an API token or your administrator password to run this command.

2.1.1. Restoring by using an API token
Copy link

You can restore the entire database of RHACS by using an API token.

Prerequisites

  • You have a RHACS backup file.
  • You have an API token with the administrator role.
  • You have installed the roxctl CLI.

Procedure

  1. Set the ROX_API_TOKEN and the ROX_ENDPOINT environment variables by running the following commands: 

    $ export ROX_API_TOKEN=<api_token>
    Copy to Clipboard Toggle word wrap 
    $ export ROX_ENDPOINT=<address>:<port_number>
    Copy to Clipboard Toggle word wrap

  2. Restore the Central database by running the following command: 

    $ roxctl central db restore <backup_file>
    1
    Copy to Clipboard Toggle word wrap
    1
    For <backup_file>, specify the name of the backup file that you want to restore.

You can restore the entire database of RHACS by using your administrator password.

Prerequisites

  • You have a RHACS backup file.
  • You have the administrator password.
  • You have installed the roxctl CLI.

Procedure

  1. Set the ROX_ENDPOINT environment variable by running the following command: 

    $ export ROX_ENDPOINT=<address>:<port_number>
    Copy to Clipboard Toggle word wrap

  2. Restore the Central database by running the following command: 

    $ roxctl -p <admin_password> \
    1 
    
  central db restore <backup_file>
    2
    Copy to Clipboard Toggle word wrap
    1
    For <admin_password>, specify the administrator password.
    2
    For <backup_file>, specify the name of the backup file that you want to restore.

2.1.3. Resuming the restore operation
Copy link

If your connection is interrupted during a restore operation or you need to go offline, you can resume the restore operation.

  • If you do not have access to the machine running the resume operation, you can use the roxctl central db restore status command to check the status of an ongoing restore operation.
  • If the connection is interrupted, the roxctl CLI automatically attempts to restore a task as soon as the connection is available again. The automatic connection retries depend on the duration specified by the timeout option.
  • Use the --timeout option to specify the time in seconds, minutes or hours after which the roxctl CLI stops trying to resume a restore operation. If the option is not specified, the default timeout is 10 minutes.
  • If a restore operation gets stuck or you want to cancel it, use the roxctl central db restore cancel command to cancel a running restore operation.
  • If a restore operation is stuck, you have canceled it, or the time has expired, you can resume the previous restore by running the original command again.
Important
  • During interruptions, RHACS caches an ongoing restore operation for 24 hours. You can resume this operation by executing the original restore command again.
  • The --timeout option only controls the client-side connection retries and has no effect on the server-side restore cache of 24 hours.
  • You cannot resume restores across Central pod restarts.
  • If a restore operation is interrupted, you must restart it within 24 hours and before restarting Central, otherwise RHACS cancels the restore operation.

You can restore your Central deployment to its original configuration by using the backups you made.

You must first restore certificates by using the roxctl CLI, and then restore the Central deployment by running the Central installation scripts.

2.2.1. Restore certificates using the roxctl CLI
Copy link

Use the roxctl CLI to generate Kubernetes manifests to install the RHACS Central component to your cluster. Doing this allows you to ensure that authentication certificates for Secured clusters and the API tokens remain valid for the restored version. If you backed up another instance of RHACS Central, you can use the certificate files from that backup.

Note

With the roxctl CLI, you can not restore the entire Central deployment. Instead, first you use the roxctl CLI to generate new manifests using the certificates in your central data backup. Afterwards, you use those manifests to install Central.

Prerequisites

  • You must have the Red Hat Advanced Cluster Security for Kubernetes backup file.
  • You must have installed the roxctl CLI.

Procedure

  1. Run the interactive install command: 

    $ roxctl central generate interactive
    Copy to Clipboard Toggle word wrap

  2. For the following prompt, enter the path of the Red Hat Advanced Cluster Security for Kubernetes backup file: 

    Enter path to the backup bundle from which to restore keys and certificates (optional): _<backup-file-path>_
    Copy to Clipboard Toggle word wrap
  3. For other following prompts, press Enter to accept the default value or enter custom values as required.

On completion, the interactive install command creates a folder named central-bundle, which has the necessary YAML manifests and scripts to deploy Central.

2.2.2. Running the Central installation scripts
Copy link

After you run the interactive installer, you can run the setup.sh script to install Central.

Procedure

  1. Run the setup.sh script to configure image registry access: 

    $ ./central-bundle/central/scripts/setup.sh
    Copy to Clipboard Toggle word wrap

  2. Create the necessary resources: 

    $ oc create -R -f central-bundle/central
    Copy to Clipboard Toggle word wrap

  3. Check the deployment progress: 

    $ oc get pod -n stackrox -w
    Copy to Clipboard Toggle word wrap

  4. After Central is running, find the RHACS portal IP address and open it in your browser. Depending on the exposure method you selected when answering the prompts, use one of the following methods to get the IP address.

    Expand
    Exposure methodCommandAddressExample

    Route

    oc -n stackrox get route central

    The address under the HOST/PORT column in the output

    https://central-stackrox.example.route

    Node Port

    oc get node -owide && oc -n stackrox get svc central-loadbalancer

    IP or hostname of any node, on the port shown for the service

    https://198.51.100.0:31489

    Load Balancer

    oc -n stackrox get svc central-loadbalancer

    EXTERNAL-IP or hostname shown for the service, on port 443

    https://192.0.2.0

    None

    central-bundle/central/scripts/port-forward.sh 8443

    https://localhost:8443

    https://localhost:8443

Note

If you have selected autogenerated password during the interactive install, you can run the following command to see it for logging into Central: 

$ cat central-bundle/password
Copy to Clipboard Toggle word wrap

You can restore your Central deployment to its original configuration by using the RHACS Operator. To successfully restore, you need the backup of your Central custom resource, central-tls, and the administrator password.

Prerequisites

  • You must have the central-tls backup file.
  • You must have the Central custom resource backup file.
  • You must have the administrator password backup file.

Procedure

  1. Use the central-tls backup file to create resources: 

    $ oc apply -f central-tls.json
    Copy to Clipboard Toggle word wrap

  2. Use the central-htpasswd backup file to create secrets: 

    $ oc apply -f central-htpasswd.json
    Copy to Clipboard Toggle word wrap

  3. Use the central-cr.yaml file to create the Central deployment: 

    $ oc apply -f central-cr.yaml
    Copy to Clipboard Toggle word wrap

2.4. Restore Central deployment using Helm
Copy link

You can restore your Central deployment to its original configuration by using Helm. To successfully restore, you need the backup of your Central custom resource, the central-tls secret, and the administrator password.

Prerequisites

  • You must have the Helm values backup file.
  • You must have a Red Hat Advanced Cluster Security for Kubernetes backup file.
  • You must have installed the roxctl CLI.

Procedure

  1. Generate values-private.yaml from the RHACS database backup file: 

    $ roxctl central generate k8s pvc --backup-bundle _<path-to-backup-file>_ --output-format "helm-values"
    Copy to Clipboard Toggle word wrap

  2. Run the helm install command and specify your backup files: 

    $ helm install -n stackrox --create-namespace stackrox-central-services rhacs/central-services -f central-values-backup.yaml -f central-bundle/values-private.yaml
    Copy to Clipboard Toggle word wrap

You can use the backups of the RHACS Central database and the deployment to restore Central to another cluster or namespace.

The following list provides a high-level overview of installation steps:

  1. Depending upon your installation method, you must first restore Central deployment by following the instructions in the following topics:

    Important
    • Make sure to use the backed-up Central certificates so that secured clusters and API tokens issued by the old Central instance remain valid.
    • If you are deploying to another namespace, you must change the namespace in backed-up resources or commands.
  2. Restore Central database by following the instruction in the Restoring Central database by using the roxctl CLI topic.
  3. If you have an external DNS entry pointing to your old RHACS Central instance, you must reconfigure it to point to the new RHACS Central instance that you create.

Legal Notice
Copy link

Copyright © 2024 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.
Back to top
Red Hat logoGithubredditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust. Explore our recent updates.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

Theme

© 2025 Red Hat