SupportConsoleDevelopersStart a trialContact

2.4. Enabling Remote JMX SSL

Overview

Red Hat JBoss Fuse provides a JMX port that allows remote monitoring and management of Fuse containers using MBeans. By default, however, the credentials that you send over the JMX connection are unencrypted and vulnerable to snooping. To encrypt the JMX connection and protect against password snooping, you need to secure JMX communications by configuring JMX over SSL.
To configure JMX over SSL, perform the following steps:
  1. Create the jbossweb.keystore file
  2. Create and deploy the keystore.xml file
  3. Add the required properties to org.apache.karaf.management.cfg
  4. Restart the container
After you have configured JMX over SSL access, you should test the connection.
Warning
If you are planning to enable SSL/TLS security, you must ensure that you explicitly disable the SSLv3 protocol, in order to safeguard against the Poodle vulnerability (CVE-2014-3566). For more details, see Disabling SSLv3 in JBoss Fuse 6.x and JBoss A-MQ 6.x.
Note
If you configure JMX over SSL while Red Hat JBoss Fuse is running, you will need to restart it.

Prerequisites

If you haven't already done so, you need to:
  • Set your JAVA_HOME environment variable
  • Configure a JBoss Fuse user with the Administrator role
    Edit the <installDir>/jboss-fuse-6.2.1.redhat-084/etc/users.properties file and add the following entry, on a single line: 
    admin=YourPassword,Administrator
    This creates a new user with username, admin, password, YourPassword, and the Administrator role.

Create the jbossweb.keystore file

Open a command prompt and make sure you are in the etc/ directory of your JBoss A-MQ installation: 
cd <installDir>/jboss-fuse-6.2.1.redhat-084/etc
At the command line, using a -dname value (Distinguished Name) appropriate for your application, type this command: 
$JAVA_HOME/bin/keytool -genkey -v -alias jbossalias -keyalg RSA -keysize 1024 -keystore jbossweb.keystore -validity 3650 -keypass JbossPassword -storepass JbossPassword -dname "CN=127.0.0.1, OU=RedHat Software Unit, O=RedHat, L=Boston, S=Mass, C=USA"
Important
Type the entire command on a single command line.
The command returns output that looks like this: 
Generating 1,024 bit RSA key pair and self-signed certificate (SHA256withRSA) with a validity of 3,650 days
	for: CN=127.0.0.1, OU=RedHat Software Unit, O=RedHat, L=Boston, ST=Mass, C=USA
New certificate (self-signed):
[
[
  Version: V3
  Subject: CN=127.0.0.1, OU=RedHat Software Unit, O=RedHat, L=Boston, ST=Mass, C=USA
  Signature Algorithm: SHA256withRSA, OID = 1.2.840.113549.1.1.11

  Key:  Sun RSA public key, 1024 bits
  modulus: 1123086025790567043604962990501918169461098372864273201795342440080393808
     1594100776075008647459910991413806372800722947670166407814901754459100720279046
     3944621813738177324031064260382659483193826177448762030437669318391072619867218
     036972335210839062722456085328301058362052369248473659880488338711351959835357
  public exponent: 65537
  Validity: [From: Thu Jun 05 12:19:52 EDT 2014,
               To: Sun Jun 02 12:19:52 EDT 2024]
  Issuer: CN=127.0.0.1, OU=RedHat Software Unit, O=RedHat, L=Boston, ST=Mass, C=USA
  SerialNumber: [    4666e4e6]

Certificate Extensions: 1
[1]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: AC 44 A5 F2 E6 2F B2 5A   5F 88 FE 69 60 B4 27 7D  .D.../.Z_..i`.'.
0010: B9 81 23 9C                                        ..#.
]
]

]
  Algorithm: [SHA256withRSA]
  Signature:
0000: 01 1D 95 C0 F2 03 B0 FD   CF 3A 1A 14 F5 2E 04 E5  .........:......
0010: DD 18 DD 0E 24 60 00 54   35 AE FE 36 7B 38 69 4C  ....$`.T5..6.8iL
0020: 1E 85 0A AF AE 24 1B 40   62 C9 F4 E5 A9 02 CD D3  .....$.@b.......
0030: 91 57 60 F6 EF D6 A4 84   56 BA 5D 21 11 F7 EA 09  .W`.....V.]!....
0040: 73 D5 6B 48 4A A9 09 93   8C 05 58 91 6C D0 53 81  s.kHJ.....X.l.S.
0050: 39 D8 29 59 73 C4 61 BE   99 13 12 89 00 1C F8 38  9.)Ys.a........8
0060: E2 BF D5 3C 87 F6 3F FA   E1 75 69 DF 37 8E 37 B5  ...<..?..ui.7.7.
0070: B7 8D 10 CC 9E 70 E8 6D   C2 1A 90 FF 3C 91 84 50  .....p.m....<..P

]
[Storing jbossweb.keystore]
Check whether <installDir>/jboss-fuse-6.2.1.redhat-084/etc now contains the file jbossweb.keystore.

Create and deploy the keystore.xml file

  1. Using your favorite xml editor, create and save the keystore.xml file in the <installDir>/jboss-fuse-6.2.1.redhat-084/etc directory.
  2. Include this text in the file: 
    <blueprint xmlns="http://www.osgi.org/xmlns/blueprint/v1.0.0"
           xmlns:jaas="http://karaf.apache.org/xmlns/jaas/v1.0.0">
     <jaas:keystore name="sample_keystore"
                    rank="1"
                    path="file:etc/jbossweb.keystore"
                    keystorePassword="JbossPassword" 
                    keyPasswords="jbossalias=JbossPassword" />
</blueprint>
  3. Deploy the keystore.xml file to the container, by copying it into the <installDir>/jboss-fuse-6.2.1.redhat-084/deploy directory (the hot deploy directory).
    Note
    Subsequently, if you need to undeploy the keystore.xml file, you can do so by deleting the keystore.xml file from the deploy/ directory while the Karaf container is running.

Add the required properties to org.apache.karaf.management.cfg

Edit the <installDir>/jboss-fuse-6.2.1.redhat-084/etc/org.apache.karaf.management.cfg file to include these properties at the end of the file: 
secured = true
secureProtocol = TLSv1
keyAlias = jbossalias
keyStore = sample_keystore
trustStore = sample_keystore
Important
You must set secureProtocol to TLSv1, in order to protect against the Poodle vulnerability (CVE-2014-3566)

Restart the JBoss A-MQ container

You must restart the JBoss A-MQ container for the new JMX SSL/TLS settings to take effect.

Testing the Secure JMX connection

  1. Open a command prompt and make sure you are in the etc/ directory of your JBoss A-MQ installation: 
    cd <installDir>/jboss-fuse-6.2.1.redhat-084/etc
  2. Open a terminal, and start up JConsole by entering this command: 
    jconsole -J-Djavax.net.debug=ssl -J-Djavax.net.ssl.trustStore=jbossweb.keystore -J-Djavax.net.ssl.trustStoreType=JKS -J-Djavax.net.ssl.trustStorePassword=JbossPassword
    Where the -J-Djavax.net.ssl.trustStore option specifies the location of the jbossweb.keystore file (make sure this location is specified correctly, or the SSL/TLS handshake will fail). The -J-Djavax.net.debug=ssl setting enables logging of SSL/TLS handshake messages, so you can verify that SSL/TLS has been successfully enabled.
    Important
    Type the entire command on the same command line.
  3. When JConsole opens, select the option Remote Process in the New Connection wizard.
  4. Under the Remote Process option, enter the following value for the service:jmx:<protocol>:<sap> connection URL: 
    service:jmx:rmi://localhost:44444/jndi/rmi://localhost:1099/karaf-root
    And fill in the Username, and Password fields with valid JAAS credentials (as set in the etc/users.properties file): 
    Username: admin
Password: YourPassword
Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.