Red Hat Summit Red Hat SummitSupportConsoleDevelopersStart a trialContact

6.6.1 Release Notes

Red Hat JBoss Data Grid 6.6

Known and resolved issues for Red Hat JBoss Data Grid 6.6.1

Christian Huffman

Red Hat Engineering Content Services

Abstract

The Red Hat JBoss Data Grid 6.6.1 Release Notes list and provide descriptions for a series of bugzilla bugs. The bugs highlight issues that are known problems and resolved issues for the release.
Welcome to Red Hat JBoss Data Grid 6.6.1. As you become familiar with the newest version of JBoss Data Grid these Release Notes provide you with information about new features, as well as known and resolved issues. Use this document in conjunction with the entire JBoss Data Grid documentation suite, available at the Red Hat Customer Service Portal's JBoss Data Grid documentation page.
Report a bug

1.1. About Red Hat JBoss Data Grid
Copy link

Red Hat's JBoss Data Grid is an open source, distributed, in-memory key/value data store built from the Infinispan open source software project. Whether deployed in client/server mode or embedded in a Java Virtual Machine, it is built to be elastic, high performance, highly available and to scale linearly.
JBoss Data Grid is accessible for both Java and Non-Java clients. Using JBoss Data Grid, data is distributed and replicated across a manageable cluster of nodes, optionally written to disk and easily accessible using the REST, Memcached and Hot Rod protocols, or directly in process through a traditional Java Map API.
Report a bug

1.2. Overview
Copy link

This document contains information about the known and resolved issues of Red Hat JBoss Data Grid version 6.6.0. Customers are requested to read this documentation prior to installing this version.
Report a bug

Chapter 2. Patching Existing Server Instances
Copy link

Micro releases for the JBoss Data Grid server are distributed as a patch. This is for your convenience, as the new version will not completely replace the installation. The base version to be patched is the x.y.0 release, and the patches x.y.# (micro release or cumulative patch) may be applied to that instance. The patch can be rolled back (including the configuration) if there is any issue during the patching process, and any subsequent patches may be applied in the same way.
This process is similar to the already known procedure in JBoss Enterprise Application Platform (EAP).

Note

It is strongly recommended to back up your existing installation, including all configuration files, before applying the patch.

Procedure 2.1. Applying the JBoss Data Grid 6.6.1 Patch

  1. Download the patch from the Red Hat Customer Portal at https://access.redhat.com/downloads/
  2. Connect to the running instance to be patched using the JBoss CLI: 
    $JDG_HOME/bin/cli.sh --connect=127.0.0.1:9999
    Copy to Clipboard Toggle word wrap
  3. Ensure that there are no active connections to the server, and then apply the patch: 
    patch apply /path/to/jboss-datagrid-6.6.1.CR1-server-patch.zip
    Copy to Clipboard Toggle word wrap
  4. Restart the server: 
     shutdown --restart=true
    Copy to Clipboard Toggle word wrap
All other distributions, such as the EAP modules, client's, and standalone library mode are provided as a full release. Due to this there is no possibility to patch existing archives for these distributions.
Report a bug

Chapter 3. Supported Configurations
Copy link

3.1. Supported configurations
Copy link

For supported hardware and software configurations, see the Red Hat JBoss Data Grid Supported Configurations reference on the Customer Portal at https://access.redhat.com/site/articles/115883.
Report a bug

Chapter 4. Component Versions
Copy link

4.1. Component Versions
Copy link

The full list of component versions used in Red Hat JBoss Data Grid is available at the Customer Portal at https://access.redhat.com/site/articles/488833.
Report a bug

Chapter 5. Known and Resolved Issues
Copy link

5.1. Known Issues
Copy link

BZ-1200822 - JSR-107 Support for clustered caches in HotRod implementation
When creating a new cache (which is not defined in server configuration file) in HotRod implementation of JSR-107, the cache is created as local only in one of the servers. This behavior requires class org.jboss.as.controller.client.ModelControllerClient to be present on the classpath.
As a workaround use a clustered cache defined in the server configuration file. This still requires cacheManager.createCache(cacheName, configuration) to be invoked before accessing the cache for the first time.
BZ-1204813 - JSR-107 Support for cacheResolverFactory annotation property

JCache annotations provides a way to define a custom CacheResolverFactory, used to produce CacheResolver; this class's purpose is to decide which cache is used for storing results of annotated methods; however, the support for specifying a CacheResolver is not provided yet.

As a workaround, define a CDI ManagedCacheResolver which will be used instead.
BZ-1223290 - JPA Cache Store not working properly on Weblogic
A JPA Cache Store deployed to WebLogic servers throws a NullPointerException after the following error message: 
Entity manager factory name (org.infinispan.persistence.jpa) is already registered
Copy to Clipboard Toggle word wrap
This is a known issue in Red Hat JBoss Data Grid 6.6.1, and no workaround exists at this time.
BZ-1158839 - Clustered cache with FileStore (shared=false) is inconsistent after restarting one node if entries are deleted during restart

In Red Hat JBoss Data Grid, when a node restarts, it does not automatically purge entries from its local cache store. As a result, the Administrator starting the node must change the node configuration manually to set the cache store to be purged when the node is starting. If the configuration is not changed, the cache may be inconsistent (removed entries can appear to be present).

This is a known issue in Red Hat JBoss Data Grid 6.6.1, and no workaround exists at this time.
BZ-1114080 - HR client SASL MD5 against LDAP fails

In Red Hat JBoss Data Grid, the server does not support pass-through MD5 authentication against LDAP. As a result, the Hot Rod client is unable to authenticate to the JBoss Data Grid server via MD5 is the authentication is backed by the LDAP server.

This is a known issue in Red Hat JBoss Data Grid 6.6.1 and a workaround is to use the PLAIN authentication over end-to-end SSL encryption.
BZ-1024373 - Default optimistic locking configuration leads to inconsistency

In Red Hat JBoss Data Grid, transactional caches are configured with optimistic locking by default. Concurrent replace() calls can return true under contention and transactions might unexpectedly commit.

Two concurrent commands, replace(key, A, B) and replace(key, A, C) may both overwrite the entry. The command which is finalized later wins, overwriting an unexpected value with new value.

This is a known issue in Red Hat JBoss Data Grid 6.6.1. As a workaround, enable write skew check and the REPEATABLE_READ isolation level. This results in concurrent replace operations working as expected.
BZ-1273411 - Cannot access cache with authorization enabled when using REST protocol

When authorization is configured for a cache, then any access to the cache via REST endpoint results in a security exception. A user is not able to access the cache since the security Subject representing the user is not properly defined, and the user cannot be authorized to access the cache.

This is a known issue in Red Hat JBoss Data Grid 6.6.1, and no workaround exists at this time.
Report a bug

5.2. Resolved Issues
Copy link

BZ-1333177 - ProtobufIndexedFieldProvider may mistakenly report nested fields as unindexed

Nested indexed fields would sometimes be reported as unindexed even if the metadata says otherwise. This could cause a query to be run fully or partially unindexed, resulting in performance issues.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1340827 - ContinuousQueryListener.resultJoining notifications generated by modify operations contain the old value not the new one

ContinuousQueryListener.resultJoining notifications generated by modify operations contain the old value not the new one. This issue only affected queries without projections.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1322679 - NullPointerException from HotRodDecoder when topology changed

When a topology change occurs, such as a node joining the cluster, the connecting client receives HotRodClientException and InvalidResponseExceptions whenever it would execute a get operation.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1332272 - NullPointerException at org.infinispan.remoting.transport.jgroups.CommandAwareRpcDispatcher$FutureCollator.futureDone()

A NullPointerException could be thrown during rebalancing. This exception was caused by FutureCollator.futures.get() querying the map before FutureCollator.futures.put() completed.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1342365 - Client doesn't retry a non-tx write operation when one of backups is suspected

When using the Hot Rod Java client with multiple backpus it was possible to have the Cache.remove() method fail, without attempting a retry, if one of the backups is no longer available.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1293575 - Rolling upgrade fails with keySet larger than 2 GB

Rolling upgrades failed if the key set was larger than 2 GB of memory. The process failed when calling recordKnownGlobalKeyset because the keys could not be dumped into a single byte array in the source cluster.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1324030 - ClassCastException at cache.getWithMetadata(key) in HotRod client during JDG rolling upgrade

When performing a rolling upgrade a ClassCastException was thrown on each getWithMetadata() for every key.

This issue was related in the EntryWrapping logic when reading data from a remote store, and is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1357823 - Expose configuration for the SSLContext protocol in the Hot Rod client

Previously, the Hot Rod client had the SSLContext set with a hardcoded TLS protocol. This prevented java 7 clients from using TLSv1.2, since it was not enabled by default.

This has been addressed in JBoss Data Grid 6.6.1 by allowing clients to specify a SSL protocol via the infinispan.client.hotrod.ssl_protocol property. To use the TLSv1.2 protocol the following should be defined: 
infinispan.client.hotrod.ssl_protocol=TLSv1.2
Copy to Clipboard Toggle word wrap

If no protocol is defined JBoss Data Grid defaults to using TLS.
BZ-1312186 - Non-threadsafe use of HashSet in AdvancedAsyncCacheLoader

A HashSet was created from the AdvancedAsyncCacheLoader$process operation, which was then accessed by a series of tasks running in parallel, resulting in the possibility of infinite loops.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1300133 - JMX attribute evictions is always zero in Statistics and ClusterCacheStats MBeans

The evictions attribute of Statistics and ClusterCacheStats components of the Cache MBean returned zero even though some eviction operations have been successfully performed. This issue only affected statistics, not the actual eviction process.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1303483 - Clear command causing deadlock when lock time out happens

If a timeout occurred when using the clear command the lock it was holding was never released, resulting in a deadlock as the Hot Rod client retried the command on another node.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1309181 - Lock timeout when registering a queried class to the registry cache

When starting a series of JBoss Data Grid nodes in parallel, and having each node register a queried class to the __cluster_registry_cache__, lock timeout errors were printed.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1312185 - Double invalidate of invalid Hot Rod connections

When a Hot Rod operation resulted in an error, RetryOnFailureOperation would invalidate the connection twice. Initially in a catch block, and a second time in a finally block. This behavior resulted in the GenericKeyedObjectPool counts to become unreliable.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1315393 - Hot Rod client stuck sporadical if a server node is shutting down

When executing remote transactions as the server is shutting down, the client could become blocked or receive TimeoutException errors.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1306389 - JGRP-2014 FILE_PING destination file name can include File.separator characters

Previously it was possible for the FILE_PING JGroups discovery method to include a file separator, such as / or \.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1, as these characters are now replaced with -.
BZ-1348404 - Coordinator failover is taking longer because VERIFY_SUSPECT runs twice

When using the Hot Rod Java client the time to recover takes twice as long if the coordinator is killed. This was due to VERIFY_SUSPECT executing twice.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1310583 - TransactionTable should ignore view changes during shutdown

During shutdown, the TransactionTable unregisters itself as a view change listener, but it can still receive view change notifications after it stopped the executor service. When this happens, it causes a RejectedExecutionException that is eventually logged by JGroups.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1314084 - protostream.javassist.NotFoundException when using ProtoSchemabuilder to register class

When configuring JBoss Data Virtualization to connect to a JBoss Data Grid remote cache using the Hot Rod EAP client modules, ProtoSchemaBuilder is called, resulting in a NotFoundException error being thrown.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1332924 - JCache remote's getCache() should retrieve existing remote caches

If a client used the JCache API together with the remote-java-client library a getCache(cacheName) would return NULL, even if the cache is configured within the server. This was caused by the JCache API not examining remote caches.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1332936 - If Infinispan is used as a provider for JCache using the remote approach it will not pick up the hotrod-client.properties

If an application used the JCache API together with the infinispan-jcache-remote library then the CacheManager was created with default properties, as no property files were passed into the constructor.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
BZ-1333098 - Add EXTERNAL SASL support to the client to be used with a JDG 7 server

A JBoss Data Grid 6.x node communicating to a JBoss Data Grid 7 server was unable to authenticate using the SASL_EXTERNAL method, as this is a new feature in JBoss Data Grid 7.

This issue is resolved for Red Hat JBoss Data Grid 6.6.1 clients. These clients may now use the server's SSL certificate CN chain to authenticate the user.
BZ-1339313 - Configure Hot Rod client with properties

Some properties, such as SSL, FILE_STORE, and TRUST_STORE, were only allowed to be defined programmatically, and could not be placed in the hotrod-client.properties file.

This issue is resolved for Red Hat JBoss Data Grid 6.6.1 clients, and these properties may be defined either programmatically or declaratively.
BZ-1313589 - (CVE-2016-2141) CVE-2016-2141 Authorization bypass in JGroups

It was found that JGroups did not require necessary headers for encrypt and auth protocols from new nodes joining the cluster. An attacker could use this flaw to bypass security restrictions, and use this vulnerability to send and receive messages within the cluster, leading to information disclosure, message spoofing, or further possible attacks.

This issue is resolved as of Red Hat JBoss Data Grid 6.6.1.
Report a bug

Appendix A. Revision History
Copy link

Revision History
Revision 6.6.1-3Sun 11 Sep 2016Christian Huffman
Included section on patching server.
Revision 6.6.1-2Fri 9 Sep 2016Christian Huffman
Updated list of resolved issues.
Revision 6.6.1-1Wed 7 Sep 2016Christian Huffman
Included set of known and resolved issues.
Revision 6.6.1-0Wed 7 Sep 2016Christian Huffman
Initial Draft for 6.6.1.

Legal Notice
Copy link

Copyright © 2016 Red Hat, Inc.
This document is licensed by Red Hat under the Creative Commons Attribution-ShareAlike 3.0 Unported License. If you distribute this document, or a modified version of it, you must provide attribution to Red Hat, Inc. and provide a link to the original. If the document is modified, all Red Hat trademarks must be removed.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat Software Collections is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.
Back to top
Red Hat logoGithubredditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust. Explore our recent updates.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

Theme

© 2026 Red Hat