Search
SupportConsoleDevelopersStart a trialContact

Deploying a Red Hat Decision Manager authoring or managed server environment on Red Hat OpenShift Container Platform

download PDF
Red Hat Decision Manager 7.6

Red Hat Customer Content Services

Abstract

This document describes how to deploy a Red Hat Decision Manager 7.6 authoring or managed server environment on Red Hat OpenShift Container Platform.

Preface

As a system engineer, you can deploy a Red Hat Decision Manager authoring or managed environment on Red Hat OpenShift Container Platform to provide a platform for developing or running services and other business assets.

Prerequisites

  • Red Hat OpenShift Container Platform version 3.11 is deployed.
  • At least four gigabytes of memory are available in the OpenShift cluster/namespace.

  • For a high-availability deployment, the following resources are available on the OpenShift cluster:

    • For the Business Central replicated pod, 8 gigabytes of memory and 2 CPU cores are required for each replica. Two replicas are created by default.
    • For the Decision Server replicated pod, 1 gigabyte of memory and 1 CPU core are required for each replica. Two replicas are created by default.
    • For the Red Hat Data Grid replicated pod, 2 gigabytes of memory and 1 CPU core are required for each replica. Two replicas are created by default.
    • The Red Hat AMQ replicated pod uses the default resource limits configured on your cluster.
Note

For instructions about checking the capacity of your cluster, see Analyzing cluster capacity in the Red Hat OpenShift Container Platform 3.11 product documentation.

  • The OpenShift project for the deployment is created.
  • You are logged in to the project using the oc command. For more information about the oc command-line tool, see the OpenShift CLI Reference. If you want to use the OpenShift Web console to deploy templates, you must also be logged on using the Web console.
  • Dynamic persistent volume (PV) provisioning is enabled. Alternatively, if dynamic PV provisioning is not enabled, a sufficient persistent volume must be available. By default, Business Central requires one 1Gi PV. You can change the PV size for Business Central persistent storage in the template parameters.

  • If you intend to deploy a high-availability authoring environment, which includes high-availability Business Central, your OpenShift environment supports persistent volumes with ReadWriteMany mode. If your environment does not support this mode, you can use NFS to provision the volumes. However, for best performance and reliability, use GlusterFS to provision persistent volumes for a high-availability authoring environment. For information about access mode support in OpenShift Online volume plug-ins, see Access Modes.

    Important

    ReadWriteMany mode is not supported on OpenShift Online and OpenShift Dedicated.

Note

Since Red Hat Decision Manager version 7.5, support for Red Hat OpenShift Container Platform 3.x is deprecated, including using templates to install Red Hat Decision Manager. This functionality will be removed in a future release.

Note

Do not use Red Hat Decision Manager templates with Red Hat OpenShift Container Platform 4.x. To deploy Red Hat Decision Manager on Red Hat OpenShift Container Platform 4.x, see the instructions in Deploying a Red Hat Decision Manager environment on Red Hat OpenShift Container Platform using Operators.

Chapter 1. Overview of Red Hat Decision Manager on Red Hat OpenShift Container Platform

You can deploy Red Hat Decision Manager into a Red Hat OpenShift Container Platform environment.

In this solution, components of Red Hat Decision Manager are deployed as separate OpenShift pods. You can scale each of the pods up and down individually to provide as few or as many containers as required for a particular component. You can use standard OpenShift methods to manage the pods and balance the load.

The following key components of Red Hat Decision Manager are available on OpenShift:

  • Decision Server, also known as Execution Server or KIE Server, is the infrastructure element that runs decision services and other deployable assets (collectively referred to as services) . All logic of the services runs on execution servers.

    You can scale up a Decision Server pod to provide as many copies as required, running on the same host or different hosts. As you scale a pod up or down, all of its copies run the same services. OpenShift provides load balancing and a request can be handled by any of the pods.

    You can deploy a separate Decision Server pod to run a different group of services. That pod can also be scaled up or down. You can have as many separate replicated Decision Server pods as required.

  • Business Central is a web-based interactive environment used for authoring services. It also provides a management console. You can use Business Central to develop services and deploy them to Decision Servers.

    Business Central is a centralized application. However, you can configure it for high availability, where multiple pods run and share the same data.

    Business Central includes a Git repository that holds the source for the services that you develop on it. It also includes a built-in Maven repository. Depending on configuration, Business Central can place the compiled services (KJAR files) into the built-in Maven repository or (if configured) into an external Maven repository.

You can arrange these and other components into various environment configurations within OpenShift.

The following environment types are typical:

  • Authoring or managed environment: An environment architecture that can be used for creating and modifying services using Business Central and also for running services on Decision Servers. It consists of pods that provide Business Central for the authoring work and one or more Decision Servers for execution of the services. Each Decision Server is a pod that you can replicate by scaling it up or down as necessary. You can deploy and undeploy services on each Decision Server using Business Central. For instructions about deploying this environment, see Deploying a Red Hat Decision Manager authoring or managed server environment on Red Hat OpenShift Container Platform.
  • Deployment with immutable servers: An alternate environment for running existing services for staging and production purposes. In this environment, when you deploy a Decision Server pod, it builds an image that loads and starts a service or group of services. You cannot stop any service on the pod or add any new service to the pod. If you want to use another version of a service or modify the configuration in any other way, you deploy a new server image and displace the old one. In this system, the Decision Server runs like any other pod on the OpenShift environment; you can use any container-based integration workflows and do not need to use any other tools to manage the pods. For instructions about deploying this environment, see Deploying a Red Hat Decision Manager immutable server environment on Red Hat OpenShift Container Platform.

You can also deploy a trial or evaluation environment. This environment includes Business Central and a Decision Server. You can set it up quickly and use it to evaluate or demonstrate developing and running assets. However, the environment does not use any persistent storage, and any work you do in the environment is not saved. For instructions about deploying this environment, see Deploying a Red Hat Decision Manager trial environment on Red Hat OpenShift Container Platform.

To deploy a Red Hat Decision Manager environment on OpenShift, you can use the templates that are provided with Red Hat Decision Manager.

Chapter 2. Preparing to deploy Red Hat Decision Manager in your OpenShift environment

Before deploying Red Hat Decision Manager in your OpenShift environment, you must complete several tasks. You do not need to repeat these tasks if you want to deploy additional images, for example, for new versions of decision services or for other decision services

2.1. Ensuring the availability of image streams and the image registry

To deploy Red Hat Decision Manager components on Red Hat OpenShift Container Platform, you must ensure that OpenShift can download the correct images from the Red Hat registry. To download the images, OpenShift requires image streams, which contain the information about the location of images. OpenShift also must be configured to authenticate with the Red Hat registry using your service account user name and password.

Some versions of the OpenShift environment include the required image streams. You must check if they are available. If image streams are available in OpenShift by default, you can use them if the OpenShift infrastructure is configured for registry authentication server. The administrator must complete the registry authentication configuration when installing the OpenShift environment.

Otherwise, you can configure registry authentication in your own project and install the image streams in that project.

Procedure

  1. Determine whether Red Hat OpenShift Container Platform is configured with the user name and password for Red Hat registry access. For details about the required configuration, see Configuring a Registry Location. If you are using an OpenShift Online subscription, it is configured for Red Hat registry access.

  2. If Red Hat OpenShift Container Platform is configured with the user name and password for Red Hat registry access, enter the following commands: 

    $ oc get imagestreamtag -n openshift | grep -F rhdm76-decisioncentral-openshift
$ oc get imagestreamtag -n openshift | grep -F rhdm76-kieserver-openshift

    If the outputs of both commands are not empty, the required image streams are available in the openshift namespace and no further action is required.

  3. If the output of one or both of the commands is empty or if OpenShift is not configured with the user name and password for Red Hat registry access, complete the following steps:

    1. Ensure you are logged in to OpenShift with the oc command and that your project is active.
    2. Complete the steps documented in Registry Service Accounts for Shared Environments. You must log in to the Red Hat Customer Portal to access the document and to complete the steps to create a registry service account.
    3. Select the OpenShift Secret tab and click the link under Download secret to download the YAML secret file.
    4. View the downloaded file and note the name that is listed in the name: entry.

    5. Enter the following commands: 

      oc create -f <file_name>.yaml
oc secrets link default <secret_name> --for=pull
oc secrets link builder <secret_name> --for=pull

      Replace <file_name> with the name of the downloaded file and <secret_name> with the name that is listed in the name: entry of the file.

    6. Download the rhdm-7.6.0-openshift-templates.zip product deliverable file from the Software Downloads page and extract the rhdm76-image-streams.yaml file.

    7. Enter the following command: 

      $ oc apply -f rhdm76-image-streams.yaml
      Note

      If you complete these steps, you install the image streams into the namespace of your project. In this case, when you deploy the templates, you must set the IMAGE_STREAM_NAMESPACE parameter to the name of this project.

2.2. Creating the secrets for Decision Server

OpenShift uses objects called secrets to hold sensitive information such as passwords or keystores. For more information about OpenShift secrets, see the Secrets chapter in the OpenShift documentation.

You must create an SSL certificate for HTTP access to Decision Server and provide it to your OpenShift environment as a secret.

Procedure

  1. Generate an SSL keystore with a private and public key for SSL encryption for Decision Server. For more information on how to create a keystore with self-signed or purchased SSL certificates, see Generate a SSL Encryption Key and Certificate.

    Note

    In a production environment, generate a valid signed certificate that matches the expected URL for Decision Server.

  2. Save the keystore in a file named keystore.jks.
  3. Record the name of the certificate. The default value for this name in Red Hat Decision Manager configuration is jboss.
  4. Record the password of the keystore file. The default value for this name in Red Hat Decision Manager configuration is mykeystorepass.

  5. Use the oc command to generate a secret named kieserver-app-secret from the new keystore file: 

    $ oc create secret generic kieserver-app-secret --from-file=keystore.jks

2.3. Creating the secrets for Business Central

You must create an SSL certificate for HTTP access to Business Central and provide it to your OpenShift environment as a secret.

Do not use the same certificate and keystore for Business Central and Decision Server.

Procedure

  1. Generate an SSL keystore with a private and public key for SSL encryption for Business Central. For more information on how to create a keystore with self-signed or purchased SSL certificates, see Generate a SSL Encryption Key and Certificate.

    Note

    In a production environment, generate a valid signed certificate that matches the expected URL for Business Central.

  2. Save the keystore in a file named keystore.jks.
  3. Record the name of the certificate. The default value for this name in Red Hat Decision Manager configuration is jboss.
  4. Record the password of the keystore file. The default value for this name in Red Hat Decision Manager configuration is mykeystorepass.

  5. Use the oc command to generate a secret named decisioncentral-app-secret from the new keystore file: 

    $ oc create secret generic decisioncentral-app-secret --from-file=keystore.jks

2.4. Preparing a Maven mirror repository for offline use

If your Red Hat OpenShift Container Platform environment does not have outgoing access to the public Internet, you must prepare a Maven repository with a mirror of all the necessary artifacts and make this repository available to your environment.

Note

You do not need to complete this procedure if your Red Hat OpenShift Container Platform environment is connected to the Internet.

Prerequisites

  • A computer that has outgoing access to the public Internet is available.

Procedure

  1. Prepare a Maven release repository to which you can write. The repository must allow read access without authentication. Your OpenShift environment must have access to this repository. You can deploy a Nexus repository manager in the OpenShift environment. For instructions about setting up Nexus on OpenShift, see Setting up Nexus. Use this repository as a separate mirror repository.

    Alternatively, if you use a custom external repository (for example, Nexus) for your services, you can use the same repository as a mirror repository.

  2. On the computer that has an outgoing connection to the public Internet, complete the following steps:

    1. Download the latest version of the Offliner tool.
    2. Download the rhdm-7.6.0-offliner.txt product deliverable file from the Software Downloads page of the Red Hat Customer Portal.

    3. Enter the following command to use the Offliner tool to download the required artifacts: 

      java -jar offliner-<version>.jar -r https://maven.repository.redhat.com/ga/ -r https://repo1.maven.org/maven2/ -d /home/user/temp rhdm-7.6.0-offliner.txt

      Replace /home/user/temp with an empty temporary directory and <version> with the version of the Offliner tool that you downloaded. The download can take a significant amount of time.

    4. Upload all artifacts from the temporary directory to the Maven mirror repository that you prepared. You can use the Maven Repository Provisioner utility to upload the artifacts.

  3. If you developed services outside Business Central and they have additional dependencies, add the dependencies to the mirror repository. If you developed the services as Maven projects, you can use the following steps to prepare these dependencies automatically. Complete the steps on the computer that has an outgoing connection to the public Internet.

    1. Create a backup of the local Maven cache directory (~/.m2/repository) and then clear the directory.
    2. Build the source of your projects using the mvn clean install command.

    3. For every project, enter the following command to ensure that Maven downloads all runtime dependencies for all the artifacts generated by the project: 

      mvn -e -DskipTests dependency:go-offline -f /path/to/project/pom.xml --batch-mode -Djava.net.preferIPv4Stack=true

      Replace /path/to/project/pom.xml with the correct path to the pom.xml file of the project.

    4. Upload all artifacts from the local Maven cache directory (~/.m2/repository) to the Maven mirror repository that you prepared. You can use the Maven Repository Provisioner utility to upload the artifacts.

2.5. Changing GlusterFS configuration

You must check whether your OpenShift environment uses GlusterFS to provide permanent storage volumes. If it uses GlusterFS, to ensure optimal performance of Business Central, you must tune your GlusterFS storage by changing the storage class configuration.

Procedure

  1. To check whether your environment uses GlusterFS, enter the following command: 

    oc get storageclass

    In the results, check whether the (default) marker is on the storage class that lists glusterfs. For example, in the following output the default storage class is gluster-container, which does list glusterfs: 

    NAME              PROVISIONER                       AGE
gluster-block     gluster.org/glusterblock          8d
gluster-container (default) kubernetes.io/glusterfs 8d

    If the result has a default storage class that does not list glusterfs or if the result is empty, you do not need to make any changes. In this case, skip the rest of this procedure.

  2. To save the configuration of the default storage class into a YAML file, enter the following command: 

    oc get storageclass <class-name> -o yaml >storage_config.yaml

    Replace <class-name> with the name of the default storage class. Example: 

    oc get storageclass gluster-container -o yaml >storage_config.yaml

  3. Edit the storage_config.yaml file:

    1. Remove the lines with the following keys:

      • creationTimestamp
      • resourceVersion
      • selfLink
      • uid

    2. If you are planning to use Business Central only as a single pod, without high-availability configuration, on the line with the volumeoptions key, add the following options: 

      features.cache-invalidation on
performance.nl-cache on

      For example:

      volumeoptions: client.ssl off, server.ssl off, features.cache-invalidation on, performance.nl-cache on

    3. If you are planning to use Business Central in a high-availability configuration, on the line with the volumeoptions key, add the following options: 

      features.cache-invalidation on
nfs.trusted-write on
nfs.trusted-sync on
performance.nl-cache on
performance.stat-prefetch off
performance.read-ahead off
performance.write-behind off
performance.readdir-ahead off
performance.io-cache off
performance.quick-read off
performance.open-behind off
locks.mandatory-locking off
performance.strict-o-direct on

      For example:

      volumeoptions: client.ssl off, server.ssl off, features.cache-invalidation on, nfs.trusted-write on, nfs.trusted-sync on, performance.nl-cache on, performance.stat-prefetch off, performance.read-ahead off, performance.write-behind off, performance.readdir-ahead off, performance.io-cache off, performance.quick-read off, performance.open-behind off, locks.mandatory-locking off, performance.strict-o-direct on

  4. To remove the existing default storage class, enter the following command: 

    oc delete storageclass <class-name>

    Replace <class-name> with the name of the default storage class. Example: 

    oc delete storageclass gluster-container

  5. To re-create the storage class using the new configuration, enter the following command: 

    oc create -f storage_config.yaml

2.6. Provisioning persistent volumes with ReadWriteMany access mode using NFS

If you want to deploy high-availability Business Central, your environment must provision persistent volumes with ReadWriteMany access mode.

Note

If you want to deploy a high-availability authoring environment, for optimal performance and reliability, provision persistent volumes using GlusterFS. Configure the GlusterFS storage class as described in Section 2.5, “Changing GlusterFS configuration”.

If your configuration requires provisioning persistent volumes with ReadWriteMany access mode but your environment does not support such provisioning, use NFS to provision the volumes. Otherwise, skip this procedure.

Procedure

Deploy an NFS server and provision the persistent volumes using NFS. For information about provisioning persistent volumes using NFS, see the "Persistent storage using NFS" section of the Configuring Clusters guide.

Chapter 3. Authoring or managed server environment

You can deploy an environment for creating and modifying services using Business Central and for running them in Decision Servers managed by Business Central. This environment consists of Business Central and one or more Decision Servers.

You can use Business Central both to develop services and to deploy them to Decision Servers. You can connect several Decision Servers to one Business Central to manage deployment of services to each of the servers.

If necessary, you can create separate environments, so that you can use one deployment of Business Central to author services (authoring environment) and another deployment of Business Central to manage deployment of staging or production services on several Decision Servers (managed server environment). Usually, one Decision Server is sufficient for a dedicated authoring environment. You can use an external Maven repository to store services from an authoring environment and deploy them to a separate managed server environment.

For Red Hat Decision Manager, the procedures to deploy an authoring environment and a managed server environment are the same. You must first deploy an authoring environment template, consisting of Business Central and one Decision Server.

If necessary, you can deploy additional Decision Server templates in the same namespace to create an environment with multiple Decision Servers. This environment can be a managed server environment for staging and production deployment of services.

Depending on your needs, you can deploy either a single authoring environment template or a high-availability (HA) authoring environment template.

A single authoring environment contains two pods. One of the pods runs Business Central, the other runs Decision Server. This environment is most suitable for single-user authoring or when your OpenShift infrastructure has limited resources.

In an HA authoring environment, both Business Central and Decision Server are provided in scalable pods. When pods are scaled, persistent storage is shared between the copies. To enable high-availability functionality in Business Central, additional pods with AMQ and Data Grid are required. These pods are configured and deployed by the high-availability authoring template. Use a high-availability authoring environment to provide maximum reliability and responsiveness, especially if several users are involved in authoring at the same time.

In the current version of Red Hat Decision Manager, an HA authoring environment is supported with certain limitations:

  • If a Business Central pod crashes while a user works with it, the user can get an error message and then is redirected to another pod. Logging on again is not required.
  • If a Business Central pod crashes during a user operation, data that was not committed (saved) might be lost.
  • If a Business Central pod crashes during creation of a project, an unusable project might be created.
  • If a Business Central pod crashes during creation of an asset, the asset might be created but not indexed, so it cannot be used. The user can open the asset in Business Central and save it again to make it indexed.

Another limitation also applies to all authoring and managed environment deployments. If a user is deploying a service to the Decision Server, no user is able to deploy another service to the same Decision Server until the first deployment completes.

You can also deploy additional managed or immutable Decision Servers, if required. Business Central can automatically discover any Decision Servers in the same namespace, including immutable Decision Servers and managed Decision Servers. This feature requires the OpenShiftStartupStrategy setting, which is enabled for all Decision Servers by default. For instructions about deploying managed Decision Servers, see Section 3.3, “Deploying an additional managed Decision Server for an authoring or managed environment”. For instructions about deploying immutable Decision Servers, see Deploying a Red Hat Decision Manager immutable server environment on Red Hat OpenShift Container Platform.

3.1. Deploying an authoring environment

You can use OpenShift templates to deploy a single or high-availability authoring environment. This environment consists of Business Central and a single Decision Server.

3.1.1. Starting configuration of the template for an authoring environment

If you want to deploy a single authoring environment, use the rhdm76-authoring.yaml template file.

If you want to deploy a high-availability authoring environment, use the rhdm76-authoring-ha.yaml template file.

Procedure

  1. Download the rhdm-7.6.0-openshift-templates.zip product deliverable file from the Software Downloads page of the Red Hat Customer Portal.
  2. Extract the required template file.

  3. Use one of the following methods to start deploying the template:

    • To use the OpenShift Web UI, in the OpenShift application console select Add to Project → Import YAML / JSON and then select or paste the <template-file-name>.yaml file. In the Add Template window, ensure Process the template is selected and click Continue.

    • To use the OpenShift command line console, prepare the following command line: 

      oc new-app -f <template-path>/<template-file-name>.yaml -p DECISION_CENTRAL_HTTPS_SECRET=decisioncentral-app-secret -p KIE_SERVER_HTTPS_SECRET=kieserver-app-secret -p PARAMETER=value

      In this command line, make the following changes:

      • Replace <template-path> with the path to the downloaded template file.
      • Replace <template-file-name> with the name of the template file.
      • Use as many -p PARAMETER=value pairs as needed to set the required parameters.

Next steps

Set the parameters for the template. Follow the steps in Section 3.1.2, “Setting required parameters for an authoring environment” to set common parameters. You can view the template file to see descriptions for all parameters.

3.1.2. Setting required parameters for an authoring environment

When configuring the template to deploy an authoring environment, you must set the following parameters in all cases.

Prerequisites

Procedure

  1. Set the following parameters:

  2. You can set the following user names and passwords. By default, the deployment automatically generates the passwords.

    • KIE Admin User (KIE_ADMIN_USER) and KIE Admin Password (KIE_ADMIN_PWD): The user name and password for the administrative user. If you want to use the Business Central to control or monitor any Decision Servers other than the Decision Server deployed by the same template , you must set and record the user name and password.
    • KIE Server User (KIE_SERVER_USER) and KIE Server Password (KIE_SERVER_PWD): The user name and password that a client application can use to connect to any of the Decision Servers.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.1.12, “Completing deployment of the template for an authoring environment”.

3.1.3. Configuring the image stream namespace for an authoring environment

If you created image streams in a namespace that is not openshift, you must configure the namespace in the template.

If all image streams were already available in your Red Hat OpenShift Container Platform environment, you can skip this procedure.

Prerequisites

Procedure

If you installed an image streams file according to instructions in Section 2.1, “Ensuring the availability of image streams and the image registry”, set the ImageStream Namespace (IMAGE_STREAM_NAMESPACE) parameter to the name of your OpenShift project.

3.1.4. Setting an optional Maven repository for an authoring environment

When configuring the template to deploy an authoring environment, if you want to place the built KJAR files into an external Maven repository, you must set parameters to access the repository.

Prerequisites

Procedure

To configure access to a custom Maven repository, set the following parameters:

  • Maven repository URL (MAVEN_REPO_URL): The URL for the Maven repository.
  • Maven repository ID (MAVEN_REPO_ID): An identifier for the Maven repository. The default value is repo-custom.
  • Maven repository username (MAVEN_REPO_USERNAME): The user name for the Maven repository.
  • Maven repository password (MAVEN_REPO_PASSWORD): The password for the Maven repository.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.1.12, “Completing deployment of the template for an authoring environment”.

Important

To export or push Business Central projects as KJAR artifacts to the external Maven repository, you must also add the repository information in the pom.xml file for every project. For information about exporting Business Central projects to an external repository, see Packaging and deploying a Red Hat Decision Manager project.

3.1.5. Specifying credentials to access the built-in Maven repository for an authoring environment

When configuring the template to deploy an authoring environment, if you want to use the Maven repository that is built into Business Central and to connect additional Decision Servers to the Business Central, you must configure credentials for accessing this Maven repository. You can then use these credentials to configure the Decision Servers.

Also, if you are configuring RH-SSO or LDAP authentication, you must set the credentials for the built-in Maven repository to a user name and password configured in RH-SSO or LDAP. This setting is required so that the Decision Server can access the Maven repository.

Prerequisites

Procedure

To configure credentials for the built-in Maven repository, set the following parameters:

  • Username for the Maven service hosted by Business Central (DECISION_CENTRAL_MAVEN_USERNAME): The user name for the built-in Maven repository.
  • Password for the Maven service hosted by Business Central (DECISION_CENTRAL_MAVEN_PASSWORD): The password for the built-in Maven repository.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.1.12, “Completing deployment of the template for an authoring environment”.

3.1.6. Configuring access to a Maven mirror in an environment without a connection to the public Internet for an authoring environment

When configuring the template to deploy an authoring environment, if your OpenShift environment does not have a connection to the public Internet, you must configure access to a Maven mirror that you set up according to Section 2.4, “Preparing a Maven mirror repository for offline use”.

Prerequisites

Procedure

To configure access to the Maven mirror, set the following parameters:

  • Maven mirror URL (MAVEN_MIRROR_URL): The URL for the Maven mirror repository that you set up in Section 2.4, “Preparing a Maven mirror repository for offline use”. This URL must be accessible from a pod in your OpenShift environment.
  • Maven mirror of (MAVEN_MIRROR_OF): The value that determines which artifacts are to be retrieved from the mirror. For instructions about setting the mirrorOf value, see Mirror Settings in the Apache Maven documentation. The default value is external:*,!repo-rhdmcentr; with this value, Maven retrieves artifacts from the built-in Maven repository of Business Central directly and retrieves any other required artifacts from the mirror. If you configure an external Maven repository (MAVEN_REPO_URL), change MAVEN_MIRROR_OF to exclude the artifacts in this repository, for example, external:*,!repo-custom. Replace repo-custom with the ID that you configured in MAVEN_REPO_ID.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.1.12, “Completing deployment of the template for an authoring environment”.

3.1.7. Specifying the Git hooks directory for an authoring environment

You can use Git hooks to facilitate interaction between the internal Git repository of Business Central and an external Git repository.

If you want to use Git hooks, you must configure a Git hooks directory.

Prerequisites

Procedure

To configure a Git hooks directory, set the following parameter:

  • Git hooks directory (GIT_HOOKS_DIR): The fully qualified path to a Git hooks directory, for example, /opt/kie/data/git/hooks. You must provide the content of this directory and mount it at the specified path. For instructions about providing and mounting the Git hooks directory using a configuration map or a persistent volume, see Section 3.2, “(Optional) Providing the Git hooks directory”.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.1.12, “Completing deployment of the template for an authoring environment”.

3.1.8. Configuring resource usage for a high-availability deployment

If you are deploying the high-availability template (rhdm76-authoring-ha.yaml), you can optionally configure resource usage to optimize performance for your requirements.

If you are deploying the single authoring environment template (rhdm76-authoring.yaml), skip this procedure.

For more information about sizing resources, see the following sections in the Red Hat OpenShift Container Platform 3.11 product documentation:

Prerequisites

Procedure

Set the following parameters of the template as applicable:

  • Business Central Container Memory Limit (DECISION_CENTRAL_MEMORY_LIMIT): The amount of memory requested in the OpenShift environment for the Business Central container. The default value is 8Gi.
  • Business Central JVM Max Memory Ratio (DECISION_CENTRAL_JAVA_MAX_MEM_RATIO): The percentage of container memory that is used for the Java Virtual Machine for Business Central. The remaining memory is used for the operating system. The default value is 80, for a limit of 80%.
  • Business Central Container CPU Limit (DECISION_CENTRAL_CPU_LIMIT): The maximum CPU usage for Business Central. The default value is 2000m.
  • KIE Server Container Memory Limit (KIE_SERVER_MEMORY_LIMIT): The amount of memory requested in the OpenShift environment for the Decision Server container. The default value is 1Gi.
  • KIE Server Container CPU Limit (KIE_SERVER_CPU_LIMIT): The maximum CPU usage for Decision Server. The default value is 1000m.
  • DataGrid Container Memory Limit (DATAGRID_MEMORY_LIMIT): The amount of memory requested in the OpenShift environment for the Red Hat Data Grid container. The default value is 2Gi.
  • DataGrid Container CPU Limit (DATAGRID_CPU_LIMIT): The maximum CPU usage for Red Hat Data Grid. The default value is 1000m.

3.1.9. Setting parameters for RH-SSO authentication for an authoring environment

If you want to use RH-SSO authentication, complete the following additional configuration when configuring the template to deploy an authoring environment.

Important

Do not configure LDAP authentication and RH-SSO authentication in the same deployment.

Prerequisites

  • A realm for Red Hat Decision Manager is created in the RH-SSO authentication system.

  • User names and passwords for Red Hat Decision Manager are created in the RH-SSO authentication system. For a list of the available roles, see Chapter 4, Red Hat Decision Manager roles and users. The following users are required in order to set the parameters for the environment:

    • An administrative user with the kie-server,rest-all,admin roles. This user can administer and use the environment. Decision Servers use this user to authenticate with Business Central.
    • A server user with the kie-server,rest-all,user roles. This user can make REST API calls to the Decision Server. Business Central uses this user to authenticate with Decision Servers.
  • Clients are created in the RH-SSO authentication system for all components of the Red Hat Decision Manager environment that you are deploying. The client setup contains the URLs for the components. You can review and edit the URLs after deploying the environment. Alternatively, the Red Hat Decision Manager deployment can create the clients. However, this option provides less detailed control over the environment.
  • You started the configuration of the template, as described in Section 3.1.1, “Starting configuration of the template for an authoring environment”.

Procedure

  1. Set the KIE_ADMIN_USER and KIE_ADMIN_PASSWORD parameters of the template to the user name and password of the administrative user that you created in the RH-SSO authentication system.
  2. Set the KIE_SERVER_USER and KIE_SERVER_PASSWORD parameters of the template to the user name and password of the server user that you created in the RH-SSO authentication system.

  3. Set the following parameters:

    • RH-SSO URL (SSO_URL): The URL for RH-SSO.
    • RH-SSO Realm name (SSO_REALM): The RH-SSO realm for Red Hat Decision Manager.
    • RH-SSO Disable SSL Certificate Validation (SSO_DISABLE_SSL_CERTIFICATE_VALIDATION): Set to true if your RH-SSO installation does not use a valid HTTPS certificate.

  4. Complete one of the following procedures:

    1. If you created the clients for Red Hat Decision Manager within RH-SSO, set the following parameters in the template:

      • Business Central RH-SSO Client name (DECISION_CENTRAL_SSO_CLIENT): The RH-SSO client name for Business Central.
      • Business Central RH-SSO Client Secret (DECISION_CENTRAL_SSO_SECRET): The secret string that is set in RH-SSO for the client for Business Central.
      • KIE Server RH-SSO Client name (KIE_SERVER_SSO_CLIENT): The RH-SSO client name for Decision Server.
      • KIE Server RH-SSO Client Secret (KIE_SERVER_SSO_SECRET): The secret string that is set in RH-SSO for the client for Decision Server.

    2. To create the clients for Red Hat Decision Manager within RH-SSO, set the following parameters in the template:

      • Business Central RH-SSO Client name (DECISION_CENTRAL_SSO_CLIENT): The name of the client to create in RH-SSO for Business Central.
      • Business Central RH-SSO Client Secret (DECISION_CENTRAL_SSO_SECRET): The secret string to set in RH-SSO for the client for Business Central.
      • KIE Server RH-SSO Client name (KIE_SERVER_SSO_CLIENT): The name of the client to create in RH-SSO for Decision Server.
      • KIE Server RH-SSO Client Secret (KIE_SERVER_SSO_SECRET): The secret string to set in RH-SSO for the client for Decision Server.
      • RH-SSO Realm Admin Username (SSO_USERNAME) and RH-SSO Realm Admin Password (SSO_PASSWORD): The user name and password for the realm administrator user for the RH-SSO realm for Red Hat Decision Manager. You must provide this user name and password in order to create the required clients.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.1.12, “Completing deployment of the template for an authoring environment”.

After completing the deployment, review the URLs for components of Red Hat Decision Manager in the RH-SSO authentication system to ensure they are correct.

3.1.10. Setting parameters for LDAP authentication for an authoring environment

If you want to use LDAP authentication, complete the following additional configuration when configuring the template to deploy an authoring environment.

Important

Do not configure LDAP authentication and RH-SSO authentication in the same deployment.

Prerequisites

Procedure

  1. In the LDAP service, create all user names in the deployment parameters. If you do not set any of the parameters, create users with the default user names. The created users must also be assigned to roles:

    • KIE_ADMIN_USER: default user name adminUser, roles: kie-server,rest-all,admin

    • KIE_SERVER_USER: default user name executionUser, roles kie-server,rest-all,guest

      For the user roles that you can configure in LDAP, see Roles and users.

  2. Set the AUTH_LDAP* parameters of the template. These parameters correspond to the settings of the LdapExtended Login module of Red Hat JBoss EAP. For instructions about using these settings, see LdapExtended login module.

    If the LDAP server does not define all the roles required for your deployment, you can map LDAP groups to Red Hat Decision Manager roles. To enable LDAP role mapping, set the following parameters:

    • RoleMapping rolesProperties file path (AUTH_ROLE_MAPPER_ROLES_PROPERTIES): The fully qualified path name of a file that defines role mapping, for example, /opt/eap/standalone/configuration/rolemapping/rolemapping.properties. You must provide this file and mount it at this path in all applicable deployment configurations; for instructions, see Section 3.4, “(Optional) Providing the LDAP role mapping file”.
    • RoleMapping replaceRole property (AUTH_ROLE_MAPPER_REPLACE_ROLE): If set to true, mapped roles replace the roles defined on the LDAP server; if set to false, both mapped roles and roles defined on the LDAP server are set as user application roles. The default setting is false.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.1.12, “Completing deployment of the template for an authoring environment”.

3.1.11. Enabling Prometheus metric collection for an authoring environment

If you want to configure your Decision Server deployment to use Prometheus to collect and store metrics, enable support for this feature in Decision Server at deployment time.

Prerequisites

Procedure

To enable support for Prometheus metric collection, set the Prometheus Server Extension Disabled (PROMETHEUS_SERVER_EXT_DISABLED) parameter to false.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.1.12, “Completing deployment of the template for an authoring environment”.

For instructions about configuring Prometheus metrics collection, see Managing and monitoring Decision Server.

3.1.12. Completing deployment of the template for an authoring environment

After setting all the required parameters in the OpenShift Web UI or in the command line, complete deployment of the template.

Procedure

Depending on the method that you are using, complete the following steps:

  • In the OpenShift Web UI, click Create.

    • If the This will create resources that may have security or project behavior implications message appears, click Create Anyway.
  • Complete the command line and press Enter.

3.2. (Optional) Providing the Git hooks directory

If you configure the GIT_HOOKS_DIR parameter, you must provide a directory of Git hooks and must mount this directory on the Business Central deployment.

The typical use of Git hooks is interaction with an upstream repository. To enable Git hooks to push commits into an upstream repository, you must also provide a secret key that corresponds to a public key configured on the upstream repository.

Procedure

  1. If interaction with an upstream repository using SSH authentication is required, complete the following steps to prepare and mount a secret with the necessary files:

    1. Prepare the id_rsa file with a private key that matches a public key stored in the repository.
    2. Prepare the known_hosts file with the correct name, address, and public key for the repository.

    3. Create a secret with the two files using the oc command, for example: 

      oc create secret git-hooks-secret --from-file=id_rsa=id_rsa --from-file=known_hosts=known_hosts

    4. Mount the secret in the SSH key path of the Business Central deployment, for example: 

      oc set volume dc/<myapp>-rhdmcentr --add --type secret --secret-name git-hooks-secret --mount-path=/home/jboss/.ssh --name=ssh-key

      Replace <myapp> with the application name that you set when configuring the template.

  2. Create the Git hooks directory. For instructions, see the Git hooks reference documentation.

    For example, a simple Git hooks directory can provide a post-commit hook that pushes the changes upstream. If the project was imported into Business Central from a repository, this repository remains configured as the upstream repository. Create a file named post-commit with permission values 755 and the following content: 

    git push

  3. Supply the Git hooks directory to the Business Central deployment. You can use a configuration map or a persistent volume.

    1. If the Git hooks consist of one or several fixed script files, use a configuration map. Complete the following steps:

      1. Change into the Git hooks directory that you have created.

      2. Create an OpenShift configuration map from the files in the directory. Run the following command: 

        oc create configmap git-hooks --from-file=<file_1>=<file_1> --from-file=<file_2>=<file_2> ...

        Replace file_1, file_2, and so on with Git hook script file names. Example: 

        oc create configmap git-hooks --from-file=post-commit=post-commit

      3. Mount the configuration map on the Business Central deployment in the path that you have configured: 

        oc set volume dc/<myapp>-rhdmcentr --add --type configmap --configmap-name git-hooks  --mount-path=<git_hooks_dir> --name=git-hooks

        Replace <myapp> with the application name that was set when configuring the template and <git_hooks_dir> is the value of GIT_HOOKS_DIR that was set when configuring the template.

    2. If the Git hooks consist of long files or depend on binaries, such as executable or KJAR files, use a persistence volume. You must create a persistent volume, create a persistent volume claim and associate the volume with the claim, transfer files to the volume, and mount the volume in the myapp-rhdmcentr deployment configuration (replace myapp with the application name). For instructions about creating and mounting persistence volumes, see Using persistent volumes. For instructions about copying files onto a persistent volume, see Transferring files in and out of containers.

  4. Wait a few minutes, then review the list and status of pods in your project. Because Business Central does not start until you provide the Git hooks directory, the Decision Server might not start at all. To see if it has started, check the output of the following command: 

    oc get pods

    If a working Decision Server pod is not present, start it: 

    oc rollout latest dc/<myapp>-kieserver

    Replace <myapp> with the application name that was set when configuring the template.

3.3. Deploying an additional managed Decision Server for an authoring or managed environment

You can deploy an additional managed Decision Server to an authoring or managed environment. Deploy the server in the same project as the Business Central deployment.

The Decision Server loads services from a Maven repository. You must configure the server to use either the Business Central built-in repository or an external repository.

The server starts with no loaded services. Use Business Central or the REST API of the Decision Server to deploy and undeploy services on the server.

3.3.1. Starting configuration of the template for an additional managed Decision Server

To deploy an additional managed Decision Server, use the rhdm76-kieserver.yaml template file.

Procedure

  1. Download the rhdm-7.6.0-openshift-templates.zip product deliverable file from the Software Downloads page of the Red Hat Customer Portal.
  2. Extract the rhdm76-kieserver.yaml template file.

  3. Use one of the following methods to start deploying the template:

    • To use the OpenShift Web UI, in the OpenShift application console select Add to Project → Import YAML / JSON and then select or paste the rhdm76-kieserver.yaml file. In the Add Template window, ensure Process the template is selected and click Continue.

    • To use the OpenShift command line console, prepare the following command line: 

      oc new-app -f <template-path>/rhdm76-kieserver.yaml -p KIE_SERVER_HTTPS_SECRET=kieserver-app-secret -p PARAMETER=value

      In this command line, make the following changes:

      • Replace <template-path> with the path to the downloaded template file.
      • Use as many -p PARAMETER=value pairs as needed to set the required parameters.

Next steps

Set the parameters for the template. Follow the steps in Section 3.3.2, “Setting required parameters for an additional managed Decision Server” to set common parameters. You can view the template file to see descriptions for all parameters.

3.3.2. Setting required parameters for an additional managed Decision Server

When configuring the template to deploy an additional managed Decision Server, you must set the following parameters in all cases.

Prerequisites

Procedure

  1. Set the following parameters:

    • KIE Server Keystore Secret Name (KIE_SERVER_HTTPS_SECRET): The name of the secret for Decision Server, as created in Section 2.2, “Creating the secrets for Decision Server”.
    • KIE Server Certificate Name (KIE_SERVER_HTTPS_NAME): The name of the certificate in the keystore that you created in Section 2.2, “Creating the secrets for Decision Server”.
    • KIE Server Keystore Password (KIE_SERVER_HTTPS_PASSWORD): The password for the keystore that you created in Section 2.2, “Creating the secrets for Decision Server”.
    • Application Name (APPLICATION_NAME): The name of the OpenShift application. It is used in the default URLs for Business Central Monitoring and Decision Server. OpenShift uses the application name to create a separate set of deployment configurations, services, routes, labels, and artifacts. You can deploy several applications using the same template into the same project, as long as you use different application names. Also, the application name determines the name of the server configuration (server template) that the Decision Server joins on Business Central. If you are deploying several Decision Servers, you must ensure each of the servers has a different application name.
    • KIE Server Mode (KIE_SERVER_MODE): In the rhdm76-kieserver.yaml template the default value is PRODUCTION. In PRODUCTION mode, you cannot deploy SNAPSHOT versions of KJAR artifacts on the Decision Server and cannot change versions of an artifact in an existing container. To deploy a new version with PRODUCTION mode, create a new container on the same Decision Server. To deploy SNAPSHOT versions or to change versions of an artifact in an existing container, set this parameter to DEVELOPMENT.
    • ImageStream Namespace (IMAGE_STREAM_NAMESPACE): The namespace where the image streams are available. If the image streams were already available in your OpenShift environment (see Section 2.1, “Ensuring the availability of image streams and the image registry”), the namespace is openshift. If you have installed the image streams file, the namespace is the name of the OpenShift project.

  2. You can set the following user name and password. By default, the deployment automatically generates the password.

    • KIE Server User (KIE_SERVER_USER) and KIE Server Password (KIE_SERVER_PWD): The user name and password that a client application can use to connect to any of the Decision Servers.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.3.9, “Completing deployment of the template for an additional managed Decision Server”.

3.3.3. Configuring the image stream namespace for an additional managed Decision Server

If you created image streams in a namespace that is not openshift, you must configure the namespace in the template.

If all image streams were already available in your Red Hat OpenShift Container Platform environment, you can skip this procedure.

Prerequisites

Procedure

If you installed an image streams file according to instructions in Section 2.1, “Ensuring the availability of image streams and the image registry”, set the ImageStream Namespace (IMAGE_STREAM_NAMESPACE) parameter to the name of your OpenShift project.

3.3.4. Configuring information about a Business Central instance for an additional managed Decision Server

If you want to enable a connection from a Business Central instance in the same namespace to the Decision Server, you must configure information about the Business Central instance.

Prerequisites

Procedure

  1. Set the following parameters:

    • KIE Admin User (KIE_ADMIN_USER) and KIE Admin Password (KIE_ADMIN_PWD): The user name and password for the administrative user. These values must be the same as the KIE_ADMIN_USER and KIE_ADMIN_PWD settings for the Business Central. If the Business Central uses RH-SSO or LDAP authentication, these values must be a user name and password configured in the authentication system with an administrator role for the Business Central.
    • Name of the Business Central service (DECISION_CENTRAL_SERVICE): The OpenShift service name for the Business Central.

  2. Configure access to the Maven repository from which the server must load services. You must configure the same repository that the Business Central uses.

    • If the Business Central uses its own built-in repository, set the following parameters:

      • Name of the Maven service hosted by Business Central (DECISION_CENTRAL_MAVEN_SERVICE): The OpenShift service name for the Business Central.
      • Username for the Maven service hosted by Business Central (DECISION_CENTRAL_MAVEN_USERNAME): The user name for the built-in Maven repository of the Business Central. Enter the user name that you configured for the Business Central as DECISION_CENTRAL_MAVEN_USERNAME.
      • Password to access the Maven service hosted by Business Central (DECISION_CENTRAL_MAVEN_PASSWORD): The password for the built-in Maven repository of the Business Central. Enter the password that you configured for the Business Central as DECISION_CENTRAL_MAVEN_PASSWORD.

    • If you configured the Business Central to use an external Maven repository, set the following parameters:

      • Maven repository URL (MAVEN_REPO_URL): A URL for the external Maven repository that Business Central uses.
      • Maven repository ID (MAVEN_REPO_ID): An identifier for the Maven repository. The default value is repo-custom.
      • Maven repository username (MAVEN_REPO_USERNAME): The user name for the Maven repository.
      • Maven repository password (MAVEN_REPO_PASSWORD): The password for the Maven repository.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.3.9, “Completing deployment of the template for an additional managed Decision Server”.

3.3.5. Configuring access to a Maven mirror in an environment without a connection to the public Internet for an additional managed Decision Server

When configuring the template to deploy an additional managed Decision Server, if your OpenShift environment does not have a connection to the public Internet, you must configure access to a Maven mirror that you set up according to Section 2.4, “Preparing a Maven mirror repository for offline use”.

Prerequisites

Procedure

To configure access to the Maven mirror, set the following parameters:

  • Maven mirror URL (MAVEN_MIRROR_URL): The URL for the Maven mirror repository that you set up in Section 2.4, “Preparing a Maven mirror repository for offline use”. This URL must be accessible from a pod in your OpenShift environment.

  • Maven mirror of (MAVEN_MIRROR_OF): The value that determines which artifacts are to be retrieved from the mirror. For instructions about setting the mirrorOf value, see Mirror Settings in the Apache Maven documentation. The default value is external:*. With this value, Maven retrieves every required artifact from the mirror and does not query any other repositories.

    • If you configure an external Maven repository (MAVEN_REPO_URL), change MAVEN_MIRROR_OF to exclude the artifacts in this repository from the mirror, for example, external:*,!repo-custom. Replace repo-custom with the ID that you configured in MAVEN_REPO_ID.
    • If you configure a built-in Business Central Maven repository (BUSINESS_CENTRAL_MAVEN_SERVICE), change MAVEN_MIRROR_OF to exclude the artifacts in this repository from the mirror: external:*,!repo-rhdmcentr.
    • If you configure both repositories, change MAVEN_MIRROR_OF to exclude the artifacts in both repositories from the mirror: external:*,!repo-rhdmcentr,!repo-custom. Replace repo-custom with the ID that you configured in MAVEN_REPO_ID.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.3.9, “Completing deployment of the template for an additional managed Decision Server”.

3.3.6. Setting parameters for RH-SSO authentication for an additional managed Decision Server

If you want to use RH-SSO authentication, complete the following additional configuration when configuring the template to deploy an additional managed Decision Server.

Important

Do not configure LDAP authentication and RH-SSO authentication in the same deployment.

Prerequisites

  • A realm for Red Hat Decision Manager is created in the RH-SSO authentication system.
  • User names and passwords for Red Hat Decision Manager are created in the RH-SSO authentication system. For a list of the available roles, see Chapter 4, Red Hat Decision Manager roles and users. In order to set the parameters for the environment, an administrative user with the kie-server,rest-all,admin roles is required. The default user name for this user is adminUser. This user can administer and use the environment.
  • Clients are created in the RH-SSO authentication system for all components of the Red Hat Decision Manager environment that you are deploying. The client setup contains the URLs for the components. You can review and edit the URLs after deploying the environment. Alternatively, the Red Hat Decision Manager deployment can create the clients. However, this option provides less detailed control over the environment.
  • You started the configuration of the template, as described in Section 3.3.1, “Starting configuration of the template for an additional managed Decision Server”.

Procedure

  1. Set the KIE_ADMIN_USER and KIE_ADMIN_PASSWORD parameters of the template to the user name and password of the administrative user that you created in the RH-SSO authentication system.

  2. Set the following parameters:

    • RH-SSO URL (SSO_URL): The URL for RH-SSO.
    • RH-SSO Realm name (SSO_REALM): The RH-SSO realm for Red Hat Decision Manager.
    • RH-SSO Disable SSL Certificate Validation (SSO_DISABLE_SSL_CERTIFICATE_VALIDATION): Set to true if your RH-SSO installation does not use a valid HTTPS certificate.

  3. Complete one of the following procedures:

    1. If you created the client for Red Hat Decision Manager within RH-SSO, set the following parameters in the template:

      • Business Central RH-SSO Client name (DECISION_CENTRAL_SSO_CLIENT): The RH-SSO client name for Business Central.
      • KIE Server RH-SSO Client name (KIE_SERVER_SSO_CLIENT): The RH-SSO client name for Decision Server.
      • KIE Server RH-SSO Client Secret (KIE_SERVER_SSO_SECRET): The secret string that is set in RH-SSO for the client for Decision Server.

    2. To create the clients for Red Hat Decision Manager within RH-SSO, set the following parameters in the template:

      • KIE Server RH-SSO Client name (KIE_SERVER_SSO_CLIENT): The name of the client to create in RH-SSO for Decision Server.
      • KIE Server RH-SSO Client Secret (KIE_SERVER_SSO_SECRET): The secret string to set in RH-SSO for the client for Decision Server.
      • RH-SSO Realm Admin Username (SSO_USERNAME) and RH-SSO Realm Admin Password (SSO_PASSWORD): The user name and password for the realm administrator user for the RH-SSO realm for Red Hat Decision Manager. You must provide this user name and password in order to create the required clients.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.3.9, “Completing deployment of the template for an additional managed Decision Server”.

After completing the deployment, review the URLs for components of Red Hat Decision Manager in the RH-SSO authentication system to ensure they are correct.

3.3.7. Setting parameters for LDAP authentication for an additional managed Decision Server

If you want to use LDAP authentication, complete the following additional configuration when configuring the template to deploy an additional managed Decision Server.

Important

Do not configure LDAP authentication and RH-SSO authentication in the same deployment.

Prerequisites

Procedure

  1. In the LDAP service, create all user names in the deployment parameters. If you do not set any of the parameters, create users with the default user names. The created users must also be assigned to roles:

    • KIE_ADMIN_USER: default user name adminUser, roles: kie-server,rest-all,admin

    • KIE_SERVER_USER: default user name executionUser, roles kie-server,rest-all,guest

      For the user roles that you can configure in LDAP, see Roles and users.

  2. Set the AUTH_LDAP* parameters of the template. These parameters correspond to the settings of the LdapExtended Login module of Red Hat JBoss EAP. For instructions about using these settings, see LdapExtended login module.

    If the LDAP server does not define all the roles required for your deployment, you can map LDAP groups to Red Hat Decision Manager roles. To enable LDAP role mapping, set the following parameters:

    • RoleMapping rolesProperties file path (AUTH_ROLE_MAPPER_ROLES_PROPERTIES): The fully qualified path name of a file that defines role mapping, for example, /opt/eap/standalone/configuration/rolemapping/rolemapping.properties. You must provide this file and mount it at this path in all applicable deployment configurations; for instructions, see Section 3.4, “(Optional) Providing the LDAP role mapping file”.
    • RoleMapping replaceRole property (AUTH_ROLE_MAPPER_REPLACE_ROLE): If set to true, mapped roles replace the roles defined on the LDAP server; if set to false, both mapped roles and roles defined on the LDAP server are set as user application roles. The default setting is false.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.3.9, “Completing deployment of the template for an additional managed Decision Server”.

3.3.8. Enabling Prometheus metric collection for an additional managed Decision Server

If you want to configure your Decision Server deployment to use Prometheus to collect and store metrics, enable support for this feature in Decision Server at deployment time.

Prerequisites

Procedure

To enable support for Prometheus metric collection, set the Prometheus Server Extension Disabled (PROMETHEUS_SERVER_EXT_DISABLED) parameter to false.

Next steps

If necessary, set additional parameters.

To complete the deployment, follow the procedure in Section 3.3.9, “Completing deployment of the template for an additional managed Decision Server”.

For instructions about configuring Prometheus metrics collection, see Managing and monitoring Decision Server.

3.3.9. Completing deployment of the template for an additional managed Decision Server

After setting all the required parameters in the OpenShift Web UI or in the command line, complete deployment of the template.

Procedure

Depending on the method that you are using, complete the following steps:

  • In the OpenShift Web UI, click Create.

    • If the This will create resources that may have security or project behavior implications message appears, click Create Anyway.
  • Complete the command line and press Enter.

3.4. (Optional) Providing the LDAP role mapping file

If you configure the AUTH_ROLE_MAPPER_ROLES_PROPERTIES parameter, you must provide a file that defines the role mapping. Mount this file on all affected deployment configurations.

Procedure

  1. Create the role mapping properties file, for example, my-role-map. The file must contain entries in the following format: 

    ldap_role = product_role1, product_role2...

    For example: 

    admins = kie-server,rest-all,admin

  2. Create an OpenShift configuration map from the file by entering the following command: 

    oc create configmap ldap-role-mapping --from-file=<new_name>=<existing_name>

    Replace <new_name> with the name that the file is to have on the pods (it must be the same as the name specified in the AUTH_ROLE_MAPPER_ROLES_PROPERTIES file) and <existing_name> with the name of the file that you created. Example: 

    oc create configmap ldap-role-mapping --from-file=rolemapping.properties=my-role-map

  3. Mount the configuration map on every deployment configuration that is configured for role mapping.

    The following deployment configurations can be affected in this environment:

    • myapp-rhdmcentr: Business Central
    • myapp-kieserver: Decision Server

    Replace myapp with the application name. Sometimes, several Decision Server deployments can be present under different application names.

    For every deployment configuration, run the command: 

     oc set volume dc/<deployment_config_name> --add --type configmap --configmap-name ldap-role-mapping --mount-path=<mapping_dir> --name=ldap-role-mapping

    Replace <mapping_dir> with the directory name (without file name) set in the AUTH_ROLE_MAPPER_ROLES_PROPERTIES parameter, for example, /opt/eap/standalone/configuration/rolemapping .

Chapter 4. Red Hat Decision Manager roles and users

To access Business Central or Decision Server, you must create users and assign them appropriate roles before the servers are started.

The Business Central and Decision Server use Java Authentication and Authorization Service (JAAS) login module to authenticate the users. If both Business Central and Decision Server are running on a single instance, then they share the same JAAS subject and security domain. Therefore, a user, who is authenticated for Business Central can also access Decision Server.

However, if Business Central and Decision Server are running on different instances, then the JAAS login module is triggered for both individually. Therefore, a user, who is authenticated for Business Central, needs to be authenticated separately to access the Decision Server (for example, to view or manage process definitions in Business Central). In case, the user is not authenticated on the Decision Server, then 401 error is logged in the log file, displaying Invalid credentials to load data from remote server. Contact your system administrator. message in Business Central.

This section describes available Red Hat Decision Manager user roles.

Note

The admin, analyst, and rest-all roles are reserved for Business Central. The kie-server role is reserved for Decision Server. For this reason, the available roles can differ depending on whether Business Central, Decision Server, or both are installed.

  • admin: Users with the admin role are the Business Central administrators. They can manage users and create, clone, and manage the repositories. They have full access to make required changes in the application. Users with the admin role have access to all areas within Red Hat Decision Manager.
  • analyst: Users with the analyst role have access to all high-level features. They can model projects. However, these users cannot add contributors to spaces or delete spaces in the Design → Projects view. Access to the Deploy → Execution Servers view, which is intended for administrators, is not available to users with the analyst role. However, the Deploy button is available to these users when they access the Library perspective.
  • rest-all: Users with the rest-all role can access Business Central REST capabilities.
  • kie-server: Users with the kie-server role can access Decision Server (KIE Server) REST capabilities.

Chapter 5. OpenShift template reference information

Red Hat Decision Manager provides the following OpenShift templates. To access the templates, download and extract the rhdm-7.6.0-openshift-templates.zip product deliverable file from the Software Downloads page of the Red Hat customer portal.

  • rhdm76-authoring.yaml provides a Business Central and a Decision Server connected to the Business Central. You can use this environment to author services and other business assets or to run them in staging or production environments. For details about this template, see Section 5.1, “rhdm76-authoring.yaml template”.
  • rhdm76-authoring-ha.yaml provides a high-availability Business Central and a Decision Server connected to the Business Central. You can use this environment to author services and other business assets or to run them in staging or production environments. For details about this template, see Section 5.2, “rhdm76-authoring-ha.yaml template”.
  • rhdm76-kieserver.yaml provides a Decision Server. You can configure the Decision Server to connect to a Business Central. In this way, you can set up a staging or production environment in which one Business Central manages several distinct Decision Servers. For details about this template, see Section 5.3, “rhdm76-kieserver.yaml template”.

5.1. rhdm76-authoring.yaml template

Application template for a non-HA persistent authoring environment, for Red Hat Decision Manager 7.6 - Deprecated

5.1.1. Parameters

Templates allow you to define parameters which take on a value. That value is then substituted wherever the parameter is referenced. References can be defined in any text field in the objects list field. Refer to the Openshift documentation for more information.

Variable nameImage Environment VariableDescriptionExample valueRequired

APPLICATION_NAME

 — 

The name for the application.

myapp

True

KIE_ADMIN_USER

KIE_ADMIN_USER

KIE administrator user name.

adminUser

False

KIE_ADMIN_PWD

KIE_ADMIN_PWD

KIE administrator password.

 — 

False

KIE_SERVER_CONTROLLER_USER

KIE_SERVER_CONTROLLER_USER

KIE server controller user name. (Sets the org.kie.server.controller.user system property)

controllerUser

False

KIE_SERVER_CONTROLLER_PWD

KIE_SERVER_CONTROLLER_PWD

KIE server controller password. (Sets the org.kie.server.controller.pwd system property)

 — 

False

KIE_SERVER_CONTROLLER_TOKEN

KIE_SERVER_CONTROLLER_TOKEN

KIE server controller token for bearer authentication. (Sets the org.kie.server.controller.token system property)

 — 

False

KIE_SERVER_USER

KIE_SERVER_USER

KIE server user name. (Sets the org.kie.server.user system property)

executionUser

False

KIE_SERVER_PWD

KIE_SERVER_PWD

KIE server password. (Sets the org.kie.server.pwd system property)

 — 

False

KIE_SERVER_BYPASS_AUTH_USER

KIE_SERVER_BYPASS_AUTH_USER

Allows the KIE server to bypass the authenticated user for task-related operations, for example, queries. (Sets the org.kie.server.bypass.auth.user system property)

false

False

KIE_SERVER_MODE

KIE_SERVER_MODE

The KIE Server mode. Valid values are 'DEVELOPMENT' or 'PRODUCTION'. In production mode, you can not deploy SNAPSHOT versions of artifacts on the KIE server and can not change the version of an artifact in an existing container. (Sets the org.kie.server.mode system property).

DEVELOPMENT

False

KIE_MBEANS

KIE_MBEANS

KIE server mbeans enabled/disabled (Sets the kie.mbeans and kie.scanner.mbeans system properties)

enabled

False

DROOLS_SERVER_FILTER_CLASSES

DROOLS_SERVER_FILTER_CLASSES

KIE server class filtering (Sets the org.drools.server.filter.classes system property)

true

False

PROMETHEUS_SERVER_EXT_DISABLED

PROMETHEUS_SERVER_EXT_DISABLED

If set to false, the prometheus server extension will be enabled. (Sets the org.kie.prometheus.server.ext.disabled system property)

false

False

DECISION_CENTRAL_HOSTNAME_HTTP

HOSTNAME_HTTP

Custom hostname for http service route for Decision Central. Leave blank for default hostname, e.g.: insecure-<application-name>-rhdmcentr-<project>.<default-domain-suffix>

 — 

False

DECISION_CENTRAL_HOSTNAME_HTTPS

HOSTNAME_HTTPS

Custom hostname for https service route for Decision Central. Leave blank for default hostname, e.g.: <application-name>-rhdmcentr-<project>.<default-domain-suffix>

 — 

False

KIE_SERVER_HOSTNAME_HTTP

HOSTNAME_HTTP

Custom hostname for http service route for KIE Server. Leave blank for default hostname, e.g.: insecure-<application-name>-kieserver-<project>.<default-domain-suffix>

 — 

False

KIE_SERVER_HOSTNAME_HTTPS

HOSTNAME_HTTPS

Custom hostname for https service route for KIE Server. Leave blank for default hostname, e.g.: <application-name>-kieserver-<project>.<default-domain-suffix>

 — 

False

DECISION_CENTRAL_HTTPS_SECRET

 — 

The name of the secret containing the keystore file for Decision Central.

decisioncentral-app-secret

True

DECISION_CENTRAL_HTTPS_KEYSTORE

HTTPS_KEYSTORE

The name of the keystore file within the secret.

keystore.jks

False

DECISION_CENTRAL_HTTPS_NAME

HTTPS_NAME

The name associated with the server certificate.

jboss

False

DECISION_CENTRAL_HTTPS_PASSWORD

HTTPS_PASSWORD

The password for the keystore and certificate.

mykeystorepass

False

KIE_SERVER_HTTPS_SECRET

 — 

The name of the secret containing the keystore file.

kieserver-app-secret

True

KIE_SERVER_HTTPS_KEYSTORE

HTTPS_KEYSTORE

The name of the keystore file within the secret.

keystore.jks

False

KIE_SERVER_HTTPS_NAME

HTTPS_NAME

The name associated with the server certificate.

jboss

False

KIE_SERVER_HTTPS_PASSWORD

HTTPS_PASSWORD

The password for the keystore and certificate.

mykeystorepass

False

KIE_SERVER_CONTROLLER_OPENSHIFT_GLOBAL_DISCOVERY_ENABLED

KIE_SERVER_CONTROLLER_OPENSHIFT_GLOBAL_DISCOVERY_ENABLED

If set to true, turns on KIE server global discovery feature (Sets the org.kie.server.controller.openshift.global.discovery.enabled system property)

false

False

KIE_SERVER_CONTROLLER_OPENSHIFT_PREFER_KIESERVER_SERVICE

KIE_SERVER_CONTROLLER_OPENSHIFT_PREFER_KIESERVER_SERVICE

If OpenShift integration of Business Central is turned on, setting this parameter to true enables connection to KIE Server via an OpenShift internal Service endpoint. (Sets the org.kie.server.controller.openshift.prefer.kieserver.service system property)

true

False

KIE_SERVER_CONTROLLER_TEMPLATE_CACHE_TTL

KIE_SERVER_CONTROLLER_TEMPLATE_CACHE_TTL

KIE ServerTemplate Cache TTL in milliseconds. (Sets the org.kie.server.controller.template.cache.ttl system property)

60000

False

IMAGE_STREAM_NAMESPACE

 — 

Namespace in which the ImageStreams for Red Hat Decision Manager images are installed. These ImageStreams are normally installed in the openshift namespace. You should only need to modify this if you installed the ImageStreams in a different namespace/project.

openshift

True

KIE_SERVER_IMAGE_STREAM_NAME

 — 

The name of the image stream to use for KIE server. Default is "rhdm-kieserver-rhel8".

rhdm-kieserver-rhel8

True

IMAGE_STREAM_TAG

 — 

A named pointer to an image in an image stream. Default is "7.6.0".

7.6.0

True

MAVEN_MIRROR_URL

MAVEN_MIRROR_URL

Maven mirror that Decision Central and KIE server must use. If you configure a mirror, this mirror must contain all artifacts that are required for building and deploying your services.

 — 

False

MAVEN_MIRROR_OF

MAVEN_MIRROR_OF

Maven mirror configuration for KIE server.

external:*,!repo-rhdmcentr

False

MAVEN_REPO_ID

MAVEN_REPO_ID

The id to use for the maven repository. If set, it can be excluded from the optionally configured mirror by adding it to MAVEN_MIRROR_OF. For example: external:*,!repo-rhdmcentr,!repo-custom. If MAVEN_MIRROR_URL is set but MAVEN_MIRROR_ID is not set, an id will be generated randomly, but won’t be usable in MAVEN_MIRROR_OF.

repo-custom

False

MAVEN_REPO_URL

MAVEN_REPO_URL

Fully qualified URL to a Maven repository or service.

http://nexus.nexus-project.svc.cluster.local:8081/nexus/content/groups/public/

False

MAVEN_REPO_USERNAME

MAVEN_REPO_USERNAME

User name for accessing the Maven repository, if required.

 — 

False

MAVEN_REPO_PASSWORD

MAVEN_REPO_PASSWORD

Password to access the Maven repository, if required.

 — 

False

DECISION_CENTRAL_MAVEN_USERNAME

KIE_MAVEN_USER

User name for accessing the Maven service hosted by Decision Central inside EAP.

mavenUser

True

DECISION_CENTRAL_MAVEN_PASSWORD

KIE_MAVEN_PWD

Password to access the Maven service hosted by Decision Central inside EAP.

 — 

True

GIT_HOOKS_DIR

GIT_HOOKS_DIR

The directory to use for git hooks, if required.

/opt/kie/data/git/hooks

False

DECISION_CENTRAL_VOLUME_CAPACITY

 — 

Size of the persistent storage for Decision Central’s runtime data.

1Gi

True

DECISION_CENTRAL_MEMORY_LIMIT

 — 

Decision Central Container memory limit.

2Gi

False

KIE_SERVER_MEMORY_LIMIT

 — 

KIE server Container memory limit.

1Gi

False

SSO_URL

SSO_URL

RH-SSO URL.

https://rh-sso.example.com/auth

False

SSO_REALM

SSO_REALM

RH-SSO Realm name.

 — 

False

DECISION_CENTRAL_SSO_CLIENT

SSO_CLIENT

Decision Central RH-SSO Client name

 — 

False

DECISION_CENTRAL_SSO_SECRET

SSO_SECRET

Decision Central RH-SSO Client Secret.

252793ed-7118-4ca8-8dab-5622fa97d892

False

KIE_SERVER_SSO_CLIENT

SSO_CLIENT

KIE Server RH-SSO Client name.

 — 

False

KIE_SERVER_SSO_SECRET

SSO_SECRET

KIE Server RH-SSO Client Secret.

252793ed-7118-4ca8-8dab-5622fa97d892

False

SSO_USERNAME

SSO_USERNAME

RH-SSO Realm admin user name used to create the Client if it doesn’t exist.

 — 

False

SSO_PASSWORD

SSO_PASSWORD

RH-SSO Realm Admin Password used to create the Client.

 — 

False

SSO_DISABLE_SSL_CERTIFICATE_VALIDATION

SSO_DISABLE_SSL_CERTIFICATE_VALIDATION

RH-SSO Disable SSL Certificate Validation.

false

False

SSO_PRINCIPAL_ATTRIBUTE

SSO_PRINCIPAL_ATTRIBUTE

RH-SSO Principal Attribute to use as user name.

preferred_username

False

AUTH_LDAP_URL

AUTH_LDAP_URL

LDAP Endpoint to connect for authentication.

ldap://myldap.example.com

False

AUTH_LDAP_BIND_DN

AUTH_LDAP_BIND_DN

Bind DN used for authentication.

uid=admin,ou=users,ou=example,ou=com

False

AUTH_LDAP_BIND_CREDENTIAL

AUTH_LDAP_BIND_CREDENTIAL

LDAP Credentials used for authentication.

Password

False

AUTH_LDAP_JAAS_SECURITY_DOMAIN

AUTH_LDAP_JAAS_SECURITY_DOMAIN

The JMX ObjectName of the JaasSecurityDomain used to decrypt the password.

 — 

False

AUTH_LDAP_BASE_CTX_DN

AUTH_LDAP_BASE_CTX_DN

LDAP Base DN of the top-level context to begin the user search.

ou=users,ou=example,ou=com

False

AUTH_LDAP_BASE_FILTER

AUTH_LDAP_BASE_FILTER

LDAP search filter used to locate the context of the user to authenticate. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. A common example for the search filter is (uid={0}).

(uid={0})

False

AUTH_LDAP_SEARCH_SCOPE

AUTH_LDAP_SEARCH_SCOPE

The search scope to use.

SUBTREE_SCOPE

False

AUTH_LDAP_SEARCH_TIME_LIMIT

AUTH_LDAP_SEARCH_TIME_LIMIT

The timeout in milliseconds for user or role searches.

10000

False

AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE

AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE

The name of the attribute in the user entry that contains the DN of the user. This may be necessary if the DN of the user itself contains special characters, backslash for example, that prevent correct user mapping. If the attribute does not exist, the entry’s DN is used.

distinguishedName

False

AUTH_LDAP_PARSE_USERNAME

AUTH_LDAP_PARSE_USERNAME

A flag indicating if the DN is to be parsed for the user name. If set to true, the DN is parsed for the user name. If set to false the DN is not parsed for the user name. This option is used together with usernameBeginString and usernameEndString.

true

False

AUTH_LDAP_USERNAME_BEGIN_STRING

AUTH_LDAP_USERNAME_BEGIN_STRING

Defines the String which is to be removed from the start of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

 — 

False

AUTH_LDAP_USERNAME_END_STRING

AUTH_LDAP_USERNAME_END_STRING

Defines the String which is to be removed from the end of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

 — 

False

AUTH_LDAP_ROLE_ATTRIBUTE_ID

AUTH_LDAP_ROLE_ATTRIBUTE_ID

Name of the attribute containing the user roles.

memberOf

False

AUTH_LDAP_ROLES_CTX_DN

AUTH_LDAP_ROLES_CTX_DN

The fixed DN of the context to search for user roles. This is not the DN where the actual roles are, but the DN where the objects containing the user roles are. For example, in a Microsoft Active Directory server, this is the DN where the user account is.

ou=groups,ou=example,ou=com

False

AUTH_LDAP_ROLE_FILTER

AUTH_LDAP_ROLE_FILTER

A search filter used to locate the roles associated with the authenticated user. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. The authenticated userDN is substituted into the filter anywhere a {1} is used. An example search filter that matches on the input username is (member={0}). An alternative that matches on the authenticated userDN is (member={1}).

(memberOf={1})

False

AUTH_LDAP_ROLE_RECURSION

AUTH_LDAP_ROLE_RECURSION

The number of levels of recursion the role search will go below a matching context. Disable recursion by setting this to 0.

1

False

AUTH_LDAP_DEFAULT_ROLE

AUTH_LDAP_DEFAULT_ROLE

A role included for all authenticated users

user

False

AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID

AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID

Name of the attribute within the roleCtxDN context which contains the role name. If the roleAttributeIsDN property is set to true, this property is used to find the role object’s name attribute.

name

False

AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN

AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN

A flag indicating if the DN returned by a query contains the roleNameAttributeID. If set to true, the DN is checked for the roleNameAttributeID. If set to false, the DN is not checked for the roleNameAttributeID. This flag can improve the performance of LDAP queries.

false

False

AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN

AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN

Whether or not the roleAttributeID contains the fully-qualified DN of a role object. If false, the role name is taken from the value of the roleNameAttributeId attribute of the context name. Certain directory schemas, such as Microsoft Active Directory, require this attribute to be set to true.

false

False

AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK

AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK

If you are not using referrals, you can ignore this option. When using referrals, this option denotes the attribute name which contains users defined for a certain role, for example member, if the role object is inside the referral. Users are checked against the content of this attribute name. If this option is not set, the check will always fail, so role objects cannot be stored in a referral tree.

 — 

False

AUTH_ROLE_MAPPER_ROLES_PROPERTIES

AUTH_ROLE_MAPPER_ROLES_PROPERTIES

When present, the RoleMapping Login Module will be configured to use the provided file. This parameter defines the fully-qualified file path and name of a properties file or resource which maps roles to replacement roles. The format is original_role=role1,role2,role3

 — 

False

AUTH_ROLE_MAPPER_REPLACE_ROLE

AUTH_ROLE_MAPPER_REPLACE_ROLE

Whether to add to the current roles, or replace the current roles with the mapped ones. Replaces if set to true.

 — 

False

5.1.2. Objects

The CLI supports various object types. A list of these object types as well as their abbreviations can be found in the Openshift documentation.

5.1.2.1. Services

A service is an abstraction which defines a logical set of pods and a policy by which to access them. Refer to the container-engine documentation for more information.

ServicePortNameDescription

${APPLICATION_NAME}-rhdmcentr

8080

http

All the Decision Central web server’s ports.

8443

https

${APPLICATION_NAME}-kieserver

8080

http

All the KIE server web server’s ports.

8443

https

5.1.2.2. Routes

A route is a way to expose a service by giving it an externally-reachable hostname such as www.example.com. A defined route and the endpoints identified by its service can be consumed by a router to provide named connectivity from external clients to your applications. Each route consists of a route name, service selector, and (optionally) security configuration. Refer to the Openshift documentation for more information.

ServiceSecurityHostname

insecure-${APPLICATION_NAME}-rhdmcentr-http

none

${DECISION_CENTRAL_HOSTNAME_HTTP}

${APPLICATION_NAME}-rhdmcentr-https

TLS passthrough

${DECISION_CENTRAL_HOSTNAME_HTTPS}

insecure-${APPLICATION_NAME}-kieserver-http

none

${KIE_SERVER_HOSTNAME_HTTP}

${APPLICATION_NAME}-kieserver-https

TLS passthrough

${KIE_SERVER_HOSTNAME_HTTPS}

5.1.2.3. Deployment Configurations

A deployment in OpenShift is a replication controller based on a user defined template called a deployment configuration. Deployments are created manually or in response to triggered events. Refer to the Openshift documentation for more information.

5.1.2.3.1. Triggers

A trigger drives the creation of new deployments in response to events, both inside and outside OpenShift. Refer to the Openshift documentation for more information.

DeploymentTriggers

${APPLICATION_NAME}-rhdmcentr

ImageChange

${APPLICATION_NAME}-kieserver

ImageChange

5.1.2.3.2. Replicas

A replication controller ensures that a specified number of pod "replicas" are running at any one time. If there are too many, the replication controller kills some pods. If there are too few, it starts more. Refer to the container-engine documentation for more information.

DeploymentReplicas

${APPLICATION_NAME}-rhdmcentr

1

${APPLICATION_NAME}-kieserver

1

5.1.2.3.3. Pod Template
5.1.2.3.3.1. Service Accounts

Service accounts are API objects that exist within each project. They can be created or deleted like any other API object. Refer to the Openshift documentation for more information.

DeploymentService Account

${APPLICATION_NAME}-rhdmcentr

${APPLICATION_NAME}-rhdmsvc

${APPLICATION_NAME}-kieserver

${APPLICATION_NAME}-rhdmsvc

5.1.2.3.3.2. Image
DeploymentImage

${APPLICATION_NAME}-rhdmcentr

rhdm-decisioncentral-rhel8

${APPLICATION_NAME}-kieserver

${KIE_SERVER_IMAGE_STREAM_NAME}

5.1.2.3.3.3. Readiness Probe

${APPLICATION_NAME}-rhdmcentr

Http Get on http://localhost:8080/rest/ready

${APPLICATION_NAME}-kieserver

Http Get on http://localhost:8080/services/rest/server/readycheck

5.1.2.3.3.4. Liveness Probe

${APPLICATION_NAME}-rhdmcentr

Http Get on http://localhost:8080/rest/healthy

${APPLICATION_NAME}-kieserver

Http Get on http://localhost:8080/services/rest/server/healthcheck

5.1.2.3.3.5. Exposed Ports
DeploymentsNamePortProtocol

${APPLICATION_NAME}-rhdmcentr

jolokia

8778

TCP

http

8080

TCP

https

8443

TCP

${APPLICATION_NAME}-kieserver

jolokia

8778

TCP

http

8080

TCP

https

8443

TCP

5.1.2.3.3.6. Image Environment Variables
DeploymentVariable nameDescriptionExample value

${APPLICATION_NAME}-rhdmcentr

APPLICATION_USERS_PROPERTIES

 — 

/opt/kie/data/configuration/application-users.properties

APPLICATION_ROLES_PROPERTIES

 — 

/opt/kie/data/configuration/application-roles.properties

KIE_ADMIN_USER

KIE administrator user name.

${KIE_ADMIN_USER}

KIE_ADMIN_PWD

KIE administrator password.

${KIE_ADMIN_PWD}

KIE_MBEANS

KIE server mbeans enabled/disabled (Sets the kie.mbeans and kie.scanner.mbeans system properties)

${KIE_MBEANS}

KIE_SERVER_CONTROLLER_OPENSHIFT_GLOBAL_DISCOVERY_ENABLED

If set to true, turns on KIE server global discovery feature (Sets the org.kie.server.controller.openshift.global.discovery.enabled system property)

${KIE_SERVER_CONTROLLER_OPENSHIFT_GLOBAL_DISCOVERY_ENABLED}

KIE_SERVER_CONTROLLER_OPENSHIFT_PREFER_KIESERVER_SERVICE

If OpenShift integration of Business Central is turned on, setting this parameter to true enables connection to KIE Server via an OpenShift internal Service endpoint. (Sets the org.kie.server.controller.openshift.prefer.kieserver.service system property)

${KIE_SERVER_CONTROLLER_OPENSHIFT_PREFER_KIESERVER_SERVICE}

KIE_SERVER_CONTROLLER_TEMPLATE_CACHE_TTL

KIE ServerTemplate Cache TTL in milliseconds. (Sets the org.kie.server.controller.template.cache.ttl system property)

${KIE_SERVER_CONTROLLER_TEMPLATE_CACHE_TTL}

KIE_WORKBENCH_CONTROLLER_OPENSHIFT_ENABLED

 — 

true

KIE_SERVER_CONTROLLER_USER

KIE server controller user name. (Sets the org.kie.server.controller.user system property)

${KIE_SERVER_CONTROLLER_USER}

KIE_SERVER_CONTROLLER_PWD

KIE server controller password. (Sets the org.kie.server.controller.pwd system property)

${KIE_SERVER_CONTROLLER_PWD}

KIE_SERVER_CONTROLLER_TOKEN

KIE server controller token for bearer authentication. (Sets the org.kie.server.controller.token system property)

${KIE_SERVER_CONTROLLER_TOKEN}

KIE_SERVER_USER

KIE server user name. (Sets the org.kie.server.user system property)

${KIE_SERVER_USER}

KIE_SERVER_PWD

KIE server password. (Sets the org.kie.server.pwd system property)

${KIE_SERVER_PWD}

WORKBENCH_ROUTE_NAME

 — 

${APPLICATION_NAME}-rhdmcentr

MAVEN_MIRROR_URL

Maven mirror that Decision Central and KIE server must use. If you configure a mirror, this mirror must contain all artifacts that are required for building and deploying your services.

${MAVEN_MIRROR_URL}

MAVEN_REPO_ID

The id to use for the maven repository. If set, it can be excluded from the optionally configured mirror by adding it to MAVEN_MIRROR_OF. For example: external:*,!repo-rhdmcentr,!repo-custom. If MAVEN_MIRROR_URL is set but MAVEN_MIRROR_ID is not set, an id will be generated randomly, but won’t be usable in MAVEN_MIRROR_OF.

${MAVEN_REPO_ID}

MAVEN_REPO_URL

Fully qualified URL to a Maven repository or service.

${MAVEN_REPO_URL}

MAVEN_REPO_USERNAME

User name for accessing the Maven repository, if required.

${MAVEN_REPO_USERNAME}

MAVEN_REPO_PASSWORD

Password to access the Maven repository, if required.

${MAVEN_REPO_PASSWORD}

KIE_MAVEN_USER

User name for accessing the Maven service hosted by Decision Central inside EAP.

${DECISION_CENTRAL_MAVEN_USERNAME}

KIE_MAVEN_PWD

Password to access the Maven service hosted by Decision Central inside EAP.

${DECISION_CENTRAL_MAVEN_PASSWORD}

GIT_HOOKS_DIR

The directory to use for git hooks, if required.

${GIT_HOOKS_DIR}

HTTPS_KEYSTORE_DIR

 — 

/etc/decisioncentral-secret-volume

HTTPS_KEYSTORE

The name of the keystore file within the secret.

${DECISION_CENTRAL_HTTPS_KEYSTORE}

HTTPS_NAME

The name associated with the server certificate.

${DECISION_CENTRAL_HTTPS_NAME}

HTTPS_PASSWORD

The password for the keystore and certificate.

${DECISION_CENTRAL_HTTPS_PASSWORD}

SSO_URL

RH-SSO URL.

${SSO_URL}

SSO_OPENIDCONNECT_DEPLOYMENTS

 — 

ROOT.war

SSO_REALM

RH-SSO Realm name.

${SSO_REALM}

SSO_SECRET

Decision Central RH-SSO Client Secret.

${DECISION_CENTRAL_SSO_SECRET}

SSO_CLIENT

Decision Central RH-SSO Client name

${DECISION_CENTRAL_SSO_CLIENT}

SSO_USERNAME

RH-SSO Realm admin user name used to create the Client if it doesn’t exist.

${SSO_USERNAME}

SSO_PASSWORD

RH-SSO Realm Admin Password used to create the Client.

${SSO_PASSWORD}

SSO_DISABLE_SSL_CERTIFICATE_VALIDATION

RH-SSO Disable SSL Certificate Validation.

${SSO_DISABLE_SSL_CERTIFICATE_VALIDATION}

SSO_PRINCIPAL_ATTRIBUTE

RH-SSO Principal Attribute to use as user name.

${SSO_PRINCIPAL_ATTRIBUTE}

HOSTNAME_HTTP

Custom hostname for http service route for Decision Central. Leave blank for default hostname, e.g.: insecure-<application-name>-rhdmcentr-<project>.<default-domain-suffix>

${DECISION_CENTRAL_HOSTNAME_HTTP}

HOSTNAME_HTTPS

Custom hostname for https service route for Decision Central. Leave blank for default hostname, e.g.: <application-name>-rhdmcentr-<project>.<default-domain-suffix>

${DECISION_CENTRAL_HOSTNAME_HTTPS}

AUTH_LDAP_URL

LDAP Endpoint to connect for authentication.

${AUTH_LDAP_URL}

AUTH_LDAP_BIND_DN

Bind DN used for authentication.

${AUTH_LDAP_BIND_DN}

AUTH_LDAP_BIND_CREDENTIAL

LDAP Credentials used for authentication.

${AUTH_LDAP_BIND_CREDENTIAL}

AUTH_LDAP_JAAS_SECURITY_DOMAIN

The JMX ObjectName of the JaasSecurityDomain used to decrypt the password.

${AUTH_LDAP_JAAS_SECURITY_DOMAIN}

AUTH_LDAP_BASE_CTX_DN

LDAP Base DN of the top-level context to begin the user search.

${AUTH_LDAP_BASE_CTX_DN}

AUTH_LDAP_BASE_FILTER

LDAP search filter used to locate the context of the user to authenticate. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. A common example for the search filter is (uid={0}).

${AUTH_LDAP_BASE_FILTER}

AUTH_LDAP_SEARCH_SCOPE

The search scope to use.

${AUTH_LDAP_SEARCH_SCOPE}

AUTH_LDAP_SEARCH_TIME_LIMIT

The timeout in milliseconds for user or role searches.

${AUTH_LDAP_SEARCH_TIME_LIMIT}

AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE

The name of the attribute in the user entry that contains the DN of the user. This may be necessary if the DN of the user itself contains special characters, backslash for example, that prevent correct user mapping. If the attribute does not exist, the entry’s DN is used.

${AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE}

AUTH_LDAP_PARSE_USERNAME

A flag indicating if the DN is to be parsed for the user name. If set to true, the DN is parsed for the user name. If set to false the DN is not parsed for the user name. This option is used together with usernameBeginString and usernameEndString.

${AUTH_LDAP_PARSE_USERNAME}

AUTH_LDAP_USERNAME_BEGIN_STRING

Defines the String which is to be removed from the start of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

${AUTH_LDAP_USERNAME_BEGIN_STRING}

AUTH_LDAP_USERNAME_END_STRING

Defines the String which is to be removed from the end of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

${AUTH_LDAP_USERNAME_END_STRING}

AUTH_LDAP_ROLE_ATTRIBUTE_ID

Name of the attribute containing the user roles.

${AUTH_LDAP_ROLE_ATTRIBUTE_ID}

AUTH_LDAP_ROLES_CTX_DN

The fixed DN of the context to search for user roles. This is not the DN where the actual roles are, but the DN where the objects containing the user roles are. For example, in a Microsoft Active Directory server, this is the DN where the user account is.

${AUTH_LDAP_ROLES_CTX_DN}

AUTH_LDAP_ROLE_FILTER

A search filter used to locate the roles associated with the authenticated user. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. The authenticated userDN is substituted into the filter anywhere a {1} is used. An example search filter that matches on the input username is (member={0}). An alternative that matches on the authenticated userDN is (member={1}).

${AUTH_LDAP_ROLE_FILTER}

AUTH_LDAP_ROLE_RECURSION

The number of levels of recursion the role search will go below a matching context. Disable recursion by setting this to 0.

${AUTH_LDAP_ROLE_RECURSION}

AUTH_LDAP_DEFAULT_ROLE

A role included for all authenticated users

${AUTH_LDAP_DEFAULT_ROLE}

AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID

Name of the attribute within the roleCtxDN context which contains the role name. If the roleAttributeIsDN property is set to true, this property is used to find the role object’s name attribute.

${AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID}

AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN

A flag indicating if the DN returned by a query contains the roleNameAttributeID. If set to true, the DN is checked for the roleNameAttributeID. If set to false, the DN is not checked for the roleNameAttributeID. This flag can improve the performance of LDAP queries.

${AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN}

AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN

Whether or not the roleAttributeID contains the fully-qualified DN of a role object. If false, the role name is taken from the value of the roleNameAttributeId attribute of the context name. Certain directory schemas, such as Microsoft Active Directory, require this attribute to be set to true.

${AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN}

AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK

If you are not using referrals, you can ignore this option. When using referrals, this option denotes the attribute name which contains users defined for a certain role, for example member, if the role object is inside the referral. Users are checked against the content of this attribute name. If this option is not set, the check will always fail, so role objects cannot be stored in a referral tree.

${AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK}

AUTH_ROLE_MAPPER_ROLES_PROPERTIES

When present, the RoleMapping Login Module will be configured to use the provided file. This parameter defines the fully-qualified file path and name of a properties file or resource which maps roles to replacement roles. The format is original_role=role1,role2,role3

${AUTH_ROLE_MAPPER_ROLES_PROPERTIES}

AUTH_ROLE_MAPPER_REPLACE_ROLE

Whether to add to the current roles, or replace the current roles with the mapped ones. Replaces if set to true.

${AUTH_ROLE_MAPPER_REPLACE_ROLE}

${APPLICATION_NAME}-kieserver

WORKBENCH_SERVICE_NAME

 — 

${APPLICATION_NAME}-rhdmcentr

KIE_ADMIN_USER

KIE administrator user name.

${KIE_ADMIN_USER}

KIE_ADMIN_PWD

KIE administrator password.

${KIE_ADMIN_PWD}

KIE_SERVER_MODE

The KIE Server mode. Valid values are 'DEVELOPMENT' or 'PRODUCTION'. In production mode, you can not deploy SNAPSHOT versions of artifacts on the KIE server and can not change the version of an artifact in an existing container. (Sets the org.kie.server.mode system property).

${KIE_SERVER_MODE}

KIE_MBEANS

KIE server mbeans enabled/disabled (Sets the kie.mbeans and kie.scanner.mbeans system properties)

${KIE_MBEANS}

DROOLS_SERVER_FILTER_CLASSES

KIE server class filtering (Sets the org.drools.server.filter.classes system property)

${DROOLS_SERVER_FILTER_CLASSES}

PROMETHEUS_SERVER_EXT_DISABLED

If set to false, the prometheus server extension will be enabled. (Sets the org.kie.prometheus.server.ext.disabled system property)

${PROMETHEUS_SERVER_EXT_DISABLED}

KIE_SERVER_BYPASS_AUTH_USER

Allows the KIE server to bypass the authenticated user for task-related operations, for example, queries. (Sets the org.kie.server.bypass.auth.user system property)

${KIE_SERVER_BYPASS_AUTH_USER}

KIE_SERVER_ID

 — 

 — 

KIE_SERVER_ROUTE_NAME

 — 

${APPLICATION_NAME}-kieserver

KIE_SERVER_STARTUP_STRATEGY

 — 

OpenShiftStartupStrategy

KIE_SERVER_USER

KIE server user name. (Sets the org.kie.server.user system property)

${KIE_SERVER_USER}

KIE_SERVER_PWD

KIE server password. (Sets the org.kie.server.pwd system property)

${KIE_SERVER_PWD}

MAVEN_MIRROR_URL

Maven mirror that Decision Central and KIE server must use. If you configure a mirror, this mirror must contain all artifacts that are required for building and deploying your services.

${MAVEN_MIRROR_URL}

MAVEN_MIRROR_OF

Maven mirror configuration for KIE server.

${MAVEN_MIRROR_OF}

MAVEN_REPOS

 — 

RHDMCENTR,EXTERNAL

RHDMCENTR_MAVEN_REPO_ID

 — 

repo-rhdmcentr

RHDMCENTR_MAVEN_REPO_SERVICE

 — 

${APPLICATION_NAME}-rhdmcentr

RHDMCENTR_MAVEN_REPO_PATH

 — 

/maven2/

RHDMCENTR_MAVEN_REPO_USERNAME

User name for accessing the Maven service hosted by Decision Central inside EAP.

${DECISION_CENTRAL_MAVEN_USERNAME}

RHDMCENTR_MAVEN_REPO_PASSWORD

Password to access the Maven service hosted by Decision Central inside EAP.

${DECISION_CENTRAL_MAVEN_PASSWORD}

EXTERNAL_MAVEN_REPO_ID

The id to use for the maven repository. If set, it can be excluded from the optionally configured mirror by adding it to MAVEN_MIRROR_OF. For example: external:*,!repo-rhdmcentr,!repo-custom. If MAVEN_MIRROR_URL is set but MAVEN_MIRROR_ID is not set, an id will be generated randomly, but won’t be usable in MAVEN_MIRROR_OF.

${MAVEN_REPO_ID}

EXTERNAL_MAVEN_REPO_URL

Fully qualified URL to a Maven repository or service.

${MAVEN_REPO_URL}

EXTERNAL_MAVEN_REPO_USERNAME

User name for accessing the Maven repository, if required.

${MAVEN_REPO_USERNAME}

EXTERNAL_MAVEN_REPO_PASSWORD

Password to access the Maven repository, if required.

${MAVEN_REPO_PASSWORD}

HTTPS_KEYSTORE_DIR

 — 

/etc/kieserver-secret-volume

HTTPS_KEYSTORE

The name of the keystore file within the secret.

${KIE_SERVER_HTTPS_KEYSTORE}

HTTPS_NAME

The name associated with the server certificate.

${KIE_SERVER_HTTPS_NAME}

HTTPS_PASSWORD

The password for the keystore and certificate.

${KIE_SERVER_HTTPS_PASSWORD}

SSO_URL

RH-SSO URL.

${SSO_URL}

SSO_OPENIDCONNECT_DEPLOYMENTS

 — 

ROOT.war

SSO_REALM

RH-SSO Realm name.

${SSO_REALM}

SSO_SECRET

KIE Server RH-SSO Client Secret.

${KIE_SERVER_SSO_SECRET}

SSO_CLIENT

KIE Server RH-SSO Client name.

${KIE_SERVER_SSO_CLIENT}

SSO_USERNAME

RH-SSO Realm admin user name used to create the Client if it doesn’t exist.

${SSO_USERNAME}

SSO_PASSWORD

RH-SSO Realm Admin Password used to create the Client.

${SSO_PASSWORD}

SSO_DISABLE_SSL_CERTIFICATE_VALIDATION

RH-SSO Disable SSL Certificate Validation.

${SSO_DISABLE_SSL_CERTIFICATE_VALIDATION}

SSO_PRINCIPAL_ATTRIBUTE

RH-SSO Principal Attribute to use as user name.

${SSO_PRINCIPAL_ATTRIBUTE}

HOSTNAME_HTTP

Custom hostname for http service route for KIE Server. Leave blank for default hostname, e.g.: insecure-<application-name>-kieserver-<project>.<default-domain-suffix>

${KIE_SERVER_HOSTNAME_HTTP}

HOSTNAME_HTTPS

Custom hostname for https service route for KIE Server. Leave blank for default hostname, e.g.: <application-name>-kieserver-<project>.<default-domain-suffix>

${KIE_SERVER_HOSTNAME_HTTPS}

AUTH_LDAP_URL

LDAP Endpoint to connect for authentication.

${AUTH_LDAP_URL}

AUTH_LDAP_BIND_DN

Bind DN used for authentication.

${AUTH_LDAP_BIND_DN}

AUTH_LDAP_BIND_CREDENTIAL

LDAP Credentials used for authentication.

${AUTH_LDAP_BIND_CREDENTIAL}

AUTH_LDAP_JAAS_SECURITY_DOMAIN

The JMX ObjectName of the JaasSecurityDomain used to decrypt the password.

${AUTH_LDAP_JAAS_SECURITY_DOMAIN}

AUTH_LDAP_BASE_CTX_DN

LDAP Base DN of the top-level context to begin the user search.

${AUTH_LDAP_BASE_CTX_DN}

AUTH_LDAP_BASE_FILTER

LDAP search filter used to locate the context of the user to authenticate. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. A common example for the search filter is (uid={0}).

${AUTH_LDAP_BASE_FILTER}

AUTH_LDAP_SEARCH_SCOPE

The search scope to use.

${AUTH_LDAP_SEARCH_SCOPE}

AUTH_LDAP_SEARCH_TIME_LIMIT

The timeout in milliseconds for user or role searches.

${AUTH_LDAP_SEARCH_TIME_LIMIT}

AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE

The name of the attribute in the user entry that contains the DN of the user. This may be necessary if the DN of the user itself contains special characters, backslash for example, that prevent correct user mapping. If the attribute does not exist, the entry’s DN is used.

${AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE}

AUTH_LDAP_PARSE_USERNAME

A flag indicating if the DN is to be parsed for the user name. If set to true, the DN is parsed for the user name. If set to false the DN is not parsed for the user name. This option is used together with usernameBeginString and usernameEndString.

${AUTH_LDAP_PARSE_USERNAME}

AUTH_LDAP_USERNAME_BEGIN_STRING

Defines the String which is to be removed from the start of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

${AUTH_LDAP_USERNAME_BEGIN_STRING}

AUTH_LDAP_USERNAME_END_STRING

Defines the String which is to be removed from the end of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

${AUTH_LDAP_USERNAME_END_STRING}

AUTH_LDAP_ROLE_ATTRIBUTE_ID

Name of the attribute containing the user roles.

${AUTH_LDAP_ROLE_ATTRIBUTE_ID}

AUTH_LDAP_ROLES_CTX_DN

The fixed DN of the context to search for user roles. This is not the DN where the actual roles are, but the DN where the objects containing the user roles are. For example, in a Microsoft Active Directory server, this is the DN where the user account is.

${AUTH_LDAP_ROLES_CTX_DN}

AUTH_LDAP_ROLE_FILTER

A search filter used to locate the roles associated with the authenticated user. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. The authenticated userDN is substituted into the filter anywhere a {1} is used. An example search filter that matches on the input username is (member={0}). An alternative that matches on the authenticated userDN is (member={1}).

${AUTH_LDAP_ROLE_FILTER}

AUTH_LDAP_ROLE_RECURSION

The number of levels of recursion the role search will go below a matching context. Disable recursion by setting this to 0.

${AUTH_LDAP_ROLE_RECURSION}

AUTH_LDAP_DEFAULT_ROLE

A role included for all authenticated users

${AUTH_LDAP_DEFAULT_ROLE}

AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID

Name of the attribute within the roleCtxDN context which contains the role name. If the roleAttributeIsDN property is set to true, this property is used to find the role object’s name attribute.

${AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID}

AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN

A flag indicating if the DN returned by a query contains the roleNameAttributeID. If set to true, the DN is checked for the roleNameAttributeID. If set to false, the DN is not checked for the roleNameAttributeID. This flag can improve the performance of LDAP queries.

${AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN}

AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN

Whether or not the roleAttributeID contains the fully-qualified DN of a role object. If false, the role name is taken from the value of the roleNameAttributeId attribute of the context name. Certain directory schemas, such as Microsoft Active Directory, require this attribute to be set to true.

${AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN}

AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK

If you are not using referrals, you can ignore this option. When using referrals, this option denotes the attribute name which contains users defined for a certain role, for example member, if the role object is inside the referral. Users are checked against the content of this attribute name. If this option is not set, the check will always fail, so role objects cannot be stored in a referral tree.

${AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK}

AUTH_ROLE_MAPPER_ROLES_PROPERTIES

When present, the RoleMapping Login Module will be configured to use the provided file. This parameter defines the fully-qualified file path and name of a properties file or resource which maps roles to replacement roles. The format is original_role=role1,role2,role3

${AUTH_ROLE_MAPPER_ROLES_PROPERTIES}

AUTH_ROLE_MAPPER_REPLACE_ROLE

Whether to add to the current roles, or replace the current roles with the mapped ones. Replaces if set to true.

${AUTH_ROLE_MAPPER_REPLACE_ROLE}

5.1.2.3.3.7. Volumes
DeploymentNamemountPathPurposereadOnly

${APPLICATION_NAME}-rhdmcentr

decisioncentral-keystore-volume

/etc/decisioncentral-secret-volume

ssl certs

True

${APPLICATION_NAME}-kieserver

kieserver-keystore-volume

/etc/kieserver-secret-volume

ssl certs

True

5.1.2.4. External Dependencies
5.1.2.4.1. Volume Claims

A PersistentVolume object is a storage resource in an OpenShift cluster. Storage is provisioned by an administrator by creating PersistentVolume objects from sources such as GCE Persistent Disks, AWS Elastic Block Stores (EBS), and NFS mounts. Refer to the Openshift documentation for more information.

NameAccess Mode

${APPLICATION_NAME}-rhdmcentr-claim

ReadWriteOnce

5.1.2.4.2. Secrets

This template requires the following secrets to be installed for the application to run.

decisioncentral-app-secret kieserver-app-secret

5.2. rhdm76-authoring-ha.yaml template

Application template for a HA persistent authoring environment, for Red Hat Decision Manager 7.6 - Deprecated

5.2.1. Parameters

Templates allow you to define parameters which take on a value. That value is then substituted wherever the parameter is referenced. References can be defined in any text field in the objects list field. Refer to the Openshift documentation for more information.

Variable nameImage Environment VariableDescriptionExample valueRequired

APPLICATION_NAME

 — 

The name for the application.

myapp

True

KIE_ADMIN_USER

KIE_ADMIN_USER

KIE administrator user name.

adminUser

False

KIE_ADMIN_PWD

KIE_ADMIN_PWD

KIE administrator password.

 — 

False

KIE_SERVER_CONTROLLER_USER

KIE_SERVER_CONTROLLER_USER

KIE server controller user name. (Sets the org.kie.server.controller.user system property)

controllerUser

False

KIE_SERVER_CONTROLLER_PWD

KIE_SERVER_CONTROLLER_PWD

KIE server controller password. (Sets the org.kie.server.controller.pwd system property)

 — 

False

KIE_SERVER_CONTROLLER_TOKEN

KIE_SERVER_CONTROLLER_TOKEN

KIE server controller token for bearer authentication. (Sets the org.kie.server.controller.token system property)

 — 

False

KIE_SERVER_USER

KIE_SERVER_USER

KIE server user name. (Sets the org.kie.server.user system property)

executionUser

False

KIE_SERVER_PWD

KIE_SERVER_PWD

KIE server password. (Sets the org.kie.server.pwd system property)

 — 

False

KIE_SERVER_BYPASS_AUTH_USER

KIE_SERVER_BYPASS_AUTH_USER

Allows the KIE server to bypass the authenticated user for task-related operations, for example, queries. (Sets the org.kie.server.bypass.auth.user system property)

false

False

KIE_SERVER_MODE

KIE_SERVER_MODE

The KIE Server mode. Valid values are 'DEVELOPMENT' or 'PRODUCTION'. In production mode, you can not deploy SNAPSHOT versions of artifacts on the KIE server and can not change the version of an artifact in an existing container. (Sets the org.kie.server.mode system property).

DEVELOPMENT

False

KIE_MBEANS

KIE_MBEANS

KIE server mbeans enabled/disabled. (Sets the kie.mbeans and kie.scanner.mbeans system properties)

enabled

False

DROOLS_SERVER_FILTER_CLASSES

DROOLS_SERVER_FILTER_CLASSES

KIE server class filtering. (Sets the org.drools.server.filter.classes system property)

true

False

PROMETHEUS_SERVER_EXT_DISABLED

PROMETHEUS_SERVER_EXT_DISABLED

If set to false, the prometheus server extension will be enabled. (Sets the org.kie.prometheus.server.ext.disabled system property)

false

False

DECISION_CENTRAL_HOSTNAME_HTTP

HOSTNAME_HTTP

Custom hostname for http service route for Decision Central. Leave blank for default hostname, e.g.: insecure-<application-name>-rhdmcentr-<project>.<default-domain-suffix>

 — 

False

DECISION_CENTRAL_HOSTNAME_HTTPS

HOSTNAME_HTTPS

Custom hostname for https service route for Decision Central. Leave blank for default hostname, e.g.: <application-name>-rhdmcentr-<project>.<default-domain-suffix>

 — 

False

KIE_SERVER_HOSTNAME_HTTP

HOSTNAME_HTTP

Custom hostname for http service route for KIE Server. Leave blank for default hostname, e.g.: insecure-<application-name>-kieserver-<project>.<default-domain-suffix>

 — 

False

KIE_SERVER_HOSTNAME_HTTPS

HOSTNAME_HTTPS

Custom hostname for https service route for KIE Server. Leave blank for default hostname, e.g.: <application-name>-kieserver-<project>.<default-domain-suffix>

 — 

False

DECISION_CENTRAL_HTTPS_SECRET

 — 

The name of the secret containing the keystore file for Decision Central.

decisioncentral-app-secret

True

DECISION_CENTRAL_HTTPS_KEYSTORE

HTTPS_KEYSTORE

The name of the keystore file within the secret for Decision Central.

keystore.jks

False

DECISION_CENTRAL_HTTPS_NAME

HTTPS_NAME

The name associated with the server certificate for Decision Central.

jboss

False

DECISION_CENTRAL_HTTPS_PASSWORD

HTTPS_PASSWORD

The password for the keystore and certificate for Decision Central.

mykeystorepass

False

KIE_SERVER_HTTPS_SECRET

 — 

The name of the secret containing the keystore file for KIE Server.

kieserver-app-secret

True

KIE_SERVER_HTTPS_KEYSTORE

HTTPS_KEYSTORE

The name of the keystore file within the secret for KIE Server.

keystore.jks

False

KIE_SERVER_HTTPS_NAME

HTTPS_NAME

The name associated with the server certificate for KIE Server.

jboss

False

KIE_SERVER_HTTPS_PASSWORD

HTTPS_PASSWORD

The password for the keystore and certificate for KIE Server.

mykeystorepass

False

APPFORMER_JMS_BROKER_USER

APPFORMER_JMS_BROKER_USER

The user name to connect to the JMS broker.

jmsBrokerUser

True

APPFORMER_JMS_BROKER_PASSWORD

APPFORMER_JMS_BROKER_PASSWORD

The password to connect to the JMS broker.

 — 

True

DATAGRID_IMAGE

 — 

DataGrid image.

registry.redhat.io/jboss-datagrid-7/datagrid73-openshift:1.3

True

DATAGRID_CPU_LIMIT

 — 

DataGrid Container CPU limit.

1000m

True

DATAGRID_MEMORY_LIMIT

 — 

DataGrid Container memory limit.

2Gi

True

DATAGRID_VOLUME_CAPACITY

 — 

Size of the persistent storage for DataGrid’s runtime data.

1Gi

True

AMQ_BROKER_IMAGE

 — 

AMQ Broker Image

registry.redhat.io/amq7/amq-broker:7.5

True

AMQ_ROLE

 — 

User role for standard broker user.

admin

True

AMQ_NAME

 — 

The name of the broker.

broker

True

AMQ_GLOBAL_MAX_SIZE

 — 

Specifies the maximum amount of memory that message data can consume. If no value is specified, half of the system’s memory is allocated.

10 gb

False

AMQ_VOLUME_CAPACITY

 — 

Size of persistent storage for AMQ broker volume.

1Gi

True

AMQ_REPLICAS

 — 

Number of broker replicas for a cluster

2

True

KIE_SERVER_CONTROLLER_OPENSHIFT_GLOBAL_DISCOVERY_ENABLED

KIE_SERVER_CONTROLLER_OPENSHIFT_GLOBAL_DISCOVERY_ENABLED

If set to true, turns on KIE server global discovery feature (Sets the org.kie.server.controller.openshift.global.discovery.enabled system property)

false

False

KIE_SERVER_CONTROLLER_OPENSHIFT_PREFER_KIESERVER_SERVICE

KIE_SERVER_CONTROLLER_OPENSHIFT_PREFER_KIESERVER_SERVICE

If OpenShift integration of Business Central is turned on, setting this parameter to true enables connection to KIE Server via an OpenShift internal Service endpoint. (Sets the org.kie.server.controller.openshift.prefer.kieserver.service system property)

true

False

KIE_SERVER_CONTROLLER_TEMPLATE_CACHE_TTL

KIE_SERVER_CONTROLLER_TEMPLATE_CACHE_TTL

KIE ServerTemplate Cache TTL in milliseconds. (Sets the org.kie.server.controller.template.cache.ttl system property)

60000

False

IMAGE_STREAM_NAMESPACE

 — 

Namespace in which the ImageStreams for Red Hat Decision Manager images are installed. These ImageStreams are normally installed in the openshift namespace. You should only need to modify this if you installed the ImageStreams in a different namespace/project.

openshift

True

DECISION_CENTRAL_IMAGE_STREAM_NAME

 — 

The name of the image stream to use for Decision Central. Default is "rhdm-decisioncentral-rhel8".

rhdm-decisioncentral-rhel8

True

KIE_SERVER_IMAGE_STREAM_NAME

 — 

The name of the image stream to use for KIE server. Default is "rhdm-kieserver-rhel8".

rhdm-kieserver-rhel8

True

IMAGE_STREAM_TAG

 — 

A named pointer to an image in an image stream. Default is "7.6.0".

7.6.0

True

MAVEN_MIRROR_URL

MAVEN_MIRROR_URL

Maven mirror that Decision Central and KIE server must use. If you configure a mirror, this mirror must contain all artifacts that are required for building and deploying your services.

 — 

False

MAVEN_MIRROR_OF

MAVEN_MIRROR_OF

Maven mirror configuration for KIE server.

external:*,!repo-rhdmcentr

False

MAVEN_REPO_ID

MAVEN_REPO_ID

The id to use for the maven repository. If set, it can be excluded from the optionally configured mirror by adding it to MAVEN_MIRROR_OF. For example: external:*,!repo-rhdmcentr,!repo-custom. If MAVEN_MIRROR_URL is set but MAVEN_MIRROR_ID is not set, an id will be generated randomly, but won’t be usable in MAVEN_MIRROR_OF.

repo-custom

False

MAVEN_REPO_URL

MAVEN_REPO_URL

Fully qualified URL to a Maven repository or service.

http://nexus.nexus-project.svc.cluster.local:8081/nexus/content/groups/public/

False

MAVEN_REPO_USERNAME

MAVEN_REPO_USERNAME

User name for accessing the Maven repository, if required.

 — 

False

MAVEN_REPO_PASSWORD

MAVEN_REPO_PASSWORD

Password to access the Maven repository, if required.

 — 

False

DECISION_CENTRAL_MAVEN_USERNAME

KIE_MAVEN_USER

User name for accessing the Maven service hosted by Decision Central inside EAP.

mavenUser

True

DECISION_CENTRAL_MAVEN_PASSWORD

KIE_MAVEN_PWD

Password to access the Maven service hosted by Decision Central inside EAP.

 — 

True

GIT_HOOKS_DIR

GIT_HOOKS_DIR

The directory to use for git hooks, if required.

/opt/kie/data/git/hooks

False

DECISION_CENTRAL_VOLUME_CAPACITY

 — 

Size of the persistent storage for Decision Central’s runtime data.

1Gi

True

DECISION_CENTRAL_MEMORY_LIMIT

 — 

Decision Central Container memory limit.

8Gi

True

DECISION_CENTRAL_JAVA_MAX_MEM_RATIO

JAVA_MAX_MEM_RATIO

Decision Central Container JVM maximum memory ratio. -Xmx is set to a ratio of the memory available on the container. The default is 80, which means the upper boundary is 80% of the available memory. To skip adding the -Xmx option, set this value to 0.

80

True

DECISION_CENTRAL_CPU_LIMIT

 — 

Decision Central Container CPU limit.

2000m

True

KIE_SERVER_MEMORY_LIMIT

 — 

KIE server Container memory limit.

1Gi

True

KIE_SERVER_CPU_LIMIT

 — 

KIE server Container CPU limit.

1000m

True

SSO_URL

SSO_URL

RH-SSO URL.

https://rh-sso.example.com/auth

False

SSO_REALM

SSO_REALM

RH-SSO Realm name.

 — 

False

DECISION_CENTRAL_SSO_CLIENT

SSO_CLIENT

Decision Central RH-SSO Client name.

 — 

False

DECISION_CENTRAL_SSO_SECRET

SSO_SECRET

Decision Central RH-SSO Client Secret.

252793ed-7118-4ca8-8dab-5622fa97d892

False

KIE_SERVER_SSO_CLIENT

SSO_CLIENT

KIE Server RH-SSO Client name.

 — 

False

KIE_SERVER_SSO_SECRET

SSO_SECRET

KIE Server RH-SSO Client Secret.

252793ed-7118-4ca8-8dab-5622fa97d892

False

SSO_USERNAME

SSO_USERNAME

RH-SSO Realm admin user name used to create the Client if it doesn’t exist.

 — 

False

SSO_PASSWORD

SSO_PASSWORD

RH-SSO Realm Admin Password used to create the Client.

 — 

False

SSO_DISABLE_SSL_CERTIFICATE_VALIDATION

SSO_DISABLE_SSL_CERTIFICATE_VALIDATION

RH-SSO Disable SSL Certificate Validation.

false

False

SSO_PRINCIPAL_ATTRIBUTE

SSO_PRINCIPAL_ATTRIBUTE

RH-SSO Principal Attribute to use as user name.

preferred_username

False

AUTH_LDAP_URL

AUTH_LDAP_URL

LDAP Endpoint to connect for authentication.

ldap://myldap.example.com

False

AUTH_LDAP_BIND_DN

AUTH_LDAP_BIND_DN

Bind DN used for authentication.

uid=admin,ou=users,ou=example,ou=com

False

AUTH_LDAP_BIND_CREDENTIAL

AUTH_LDAP_BIND_CREDENTIAL

LDAP Credentials used for authentication.

Password

False

AUTH_LDAP_JAAS_SECURITY_DOMAIN

AUTH_LDAP_JAAS_SECURITY_DOMAIN

The JMX ObjectName of the JaasSecurityDomain used to decrypt the password.

 — 

False

AUTH_LDAP_BASE_CTX_DN

AUTH_LDAP_BASE_CTX_DN

LDAP Base DN of the top-level context to begin the user search.

ou=users,ou=example,ou=com

False

AUTH_LDAP_BASE_FILTER

AUTH_LDAP_BASE_FILTER

LDAP search filter used to locate the context of the user to authenticate. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. A common example for the search filter is (uid={0}).

(uid={0})

False

AUTH_LDAP_SEARCH_SCOPE

AUTH_LDAP_SEARCH_SCOPE

The search scope to use.

SUBTREE_SCOPE

False

AUTH_LDAP_SEARCH_TIME_LIMIT

AUTH_LDAP_SEARCH_TIME_LIMIT

The timeout in milliseconds for user or role searches.

10000

False

AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE

AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE

The name of the attribute in the user entry that contains the DN of the user. This may be necessary if the DN of the user itself contains special characters, backslash for example, that prevent correct user mapping. If the attribute does not exist, the entry’s DN is used.

distinguishedName

False

AUTH_LDAP_PARSE_USERNAME

AUTH_LDAP_PARSE_USERNAME

A flag indicating if the DN is to be parsed for the user name. If set to true, the DN is parsed for the user name. If set to false the DN is not parsed for the user name. This option is used together with usernameBeginString and usernameEndString.

true

False

AUTH_LDAP_USERNAME_BEGIN_STRING

AUTH_LDAP_USERNAME_BEGIN_STRING

Defines the String which is to be removed from the start of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

 — 

False

AUTH_LDAP_USERNAME_END_STRING

AUTH_LDAP_USERNAME_END_STRING

Defines the String which is to be removed from the end of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

 — 

False

AUTH_LDAP_ROLE_ATTRIBUTE_ID

AUTH_LDAP_ROLE_ATTRIBUTE_ID

Name of the attribute containing the user roles.

memberOf

False

AUTH_LDAP_ROLES_CTX_DN

AUTH_LDAP_ROLES_CTX_DN

The fixed DN of the context to search for user roles. This is not the DN where the actual roles are, but the DN where the objects containing the user roles are. For example, in a Microsoft Active Directory server, this is the DN where the user account is.

ou=groups,ou=example,ou=com

False

AUTH_LDAP_ROLE_FILTER

AUTH_LDAP_ROLE_FILTER

A search filter used to locate the roles associated with the authenticated user. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. The authenticated userDN is substituted into the filter anywhere a {1} is used. An example search filter that matches on the input username is (member={0}). An alternative that matches on the authenticated userDN is (member={1}).

(memberOf={1})

False

AUTH_LDAP_ROLE_RECURSION

AUTH_LDAP_ROLE_RECURSION

The number of levels of recursion the role search will go below a matching context. Disable recursion by setting this to 0.

1

False

AUTH_LDAP_DEFAULT_ROLE

AUTH_LDAP_DEFAULT_ROLE

A role included for all authenticated users

user

False

AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID

AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID

Name of the attribute within the roleCtxDN context which contains the role name. If the roleAttributeIsDN property is set to true, this property is used to find the role object’s name attribute.

name

False

AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN

AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN

A flag indicating if the DN returned by a query contains the roleNameAttributeID. If set to true, the DN is checked for the roleNameAttributeID. If set to false, the DN is not checked for the roleNameAttributeID. This flag can improve the performance of LDAP queries.

false

False

AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN

AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN

Whether or not the roleAttributeID contains the fully-qualified DN of a role object. If false, the role name is taken from the value of the roleNameAttributeId attribute of the context name. Certain directory schemas, such as Microsoft Active Directory, require this attribute to be set to true.

false

False

AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK

AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK

If you are not using referrals, you can ignore this option. When using referrals, this option denotes the attribute name which contains users defined for a certain role, for example member, if the role object is inside the referral. Users are checked against the content of this attribute name. If this option is not set, the check will always fail, so role objects cannot be stored in a referral tree.

 — 

False

AUTH_ROLE_MAPPER_ROLES_PROPERTIES

AUTH_ROLE_MAPPER_ROLES_PROPERTIES

When present, the RoleMapping Login Module will be configured to use the provided file. This parameter defines the fully-qualified file path and name of a properties file or resource which maps roles to replacement roles. The format is original_role=role1,role2,role3

 — 

False

AUTH_ROLE_MAPPER_REPLACE_ROLE

AUTH_ROLE_MAPPER_REPLACE_ROLE

Whether to add to the current roles, or replace the current roles with the mapped ones. Replaces if set to true.

 — 

False

5.2.2. Objects

The CLI supports various object types. A list of these object types as well as their abbreviations can be found in the Openshift documentation.

5.2.2.1. Services

A service is an abstraction which defines a logical set of pods and a policy by which to access them. Refer to the container-engine documentation for more information.

ServicePortNameDescription

${APPLICATION_NAME}-rhdmcentr

8080

http

All the Decision Central web server’s ports.

8443

https

${APPLICATION_NAME}-rhdmcentr-ping

8888

ping

The JGroups ping port for rhdmcentr clustering.

${APPLICATION_NAME}-datagrid-ping

8888

ping

Provides a ping service for clustered applications.

${APPLICATION_NAME}-datagrid

11222

hotrod

Provides a service for accessing the application over Hot Rod protocol.

${APPLICATION_NAME}-kieserver

8080

http

All the KIE server web server’s ports.

8443

https

${APPLICATION_NAME}-amq-tcp

61616

 — 

The broker’s OpenWire port.

ping

8888

 — 

The JGroups ping port for amq clustering.

5.2.2.2. Routes

A route is a way to expose a service by giving it an externally-reachable hostname such as www.example.com. A defined route and the endpoints identified by its service can be consumed by a router to provide named connectivity from external clients to your applications. Each route consists of a route name, service selector, and (optionally) security configuration. Refer to the Openshift documentation for more information.

ServiceSecurityHostname

insecure-${APPLICATION_NAME}-rhdmcentr-http

none

${DECISION_CENTRAL_HOSTNAME_HTTP}

${APPLICATION_NAME}-rhdmcentr-https

TLS passthrough

${DECISION_CENTRAL_HOSTNAME_HTTPS}

insecure-${APPLICATION_NAME}-kieserver-http

none

${KIE_SERVER_HOSTNAME_HTTP}

${APPLICATION_NAME}-kieserver-https

TLS passthrough

${KIE_SERVER_HOSTNAME_HTTPS}

5.2.2.3. Deployment Configurations

A deployment in OpenShift is a replication controller based on a user defined template called a deployment configuration. Deployments are created manually or in response to triggered events. Refer to the Openshift documentation for more information.

5.2.2.3.1. Triggers

A trigger drives the creation of new deployments in response to events, both inside and outside OpenShift. Refer to the Openshift documentation for more information.

DeploymentTriggers

${APPLICATION_NAME}-rhdmcentr

ImageChange

${APPLICATION_NAME}-kieserver

ImageChange

5.2.2.3.2. Replicas

A replication controller ensures that a specified number of pod "replicas" are running at any one time. If there are too many, the replication controller kills some pods. If there are too few, it starts more. Refer to the container-engine documentation for more information.

DeploymentReplicas

${APPLICATION_NAME}-rhdmcentr

2

${APPLICATION_NAME}-kieserver

2

5.2.2.3.3. Pod Template
5.2.2.3.3.1. Service Accounts

Service accounts are API objects that exist within each project. They can be created or deleted like any other API object. Refer to the Openshift documentation for more information.

DeploymentService Account

${APPLICATION_NAME}-rhdmcentr

${APPLICATION_NAME}-rhdmsvc

${APPLICATION_NAME}-kieserver

${APPLICATION_NAME}-rhdmsvc

5.2.2.3.3.2. Image
DeploymentImage

${APPLICATION_NAME}-rhdmcentr

${DECISION_CENTRAL_IMAGE_STREAM_NAME}

${APPLICATION_NAME}-kieserver

${KIE_SERVER_IMAGE_STREAM_NAME}

5.2.2.3.3.3. Readiness Probe

${APPLICATION_NAME}-rhdmcentr

Http Get on http://localhost:8080/rest/ready

${APPLICATION_NAME}-kieserver

Http Get on http://localhost:8080/services/rest/server/readycheck

5.2.2.3.3.4. Liveness Probe

${APPLICATION_NAME}-rhdmcentr

Http Get on http://localhost:8080/rest/healthy

${APPLICATION_NAME}-kieserver

Http Get on http://localhost:8080/services/rest/server/healthcheck

5.2.2.3.3.5. Exposed Ports
DeploymentsNamePortProtocol

${APPLICATION_NAME}-rhdmcentr

jolokia

8778

TCP

http

8080

TCP

https

8443

TCP

ping

8888

TCP

${APPLICATION_NAME}-kieserver

jolokia

8778

TCP

http

8080

TCP

https

8443

TCP

5.2.2.3.3.6. Image Environment Variables
DeploymentVariable nameDescriptionExample value

${APPLICATION_NAME}-rhdmcentr

APPLICATION_USERS_PROPERTIES

 — 

/opt/kie/data/configuration/application-users.properties

APPLICATION_ROLES_PROPERTIES

 — 

/opt/kie/data/configuration/application-roles.properties

KIE_ADMIN_USER

KIE administrator user name.

${KIE_ADMIN_USER}

KIE_ADMIN_PWD

KIE administrator password.

${KIE_ADMIN_PWD}

KIE_MBEANS

KIE server mbeans enabled/disabled. (Sets the kie.mbeans and kie.scanner.mbeans system properties)

${KIE_MBEANS}

KIE_SERVER_CONTROLLER_OPENSHIFT_GLOBAL_DISCOVERY_ENABLED

If set to true, turns on KIE server global discovery feature (Sets the org.kie.server.controller.openshift.global.discovery.enabled system property)

${KIE_SERVER_CONTROLLER_OPENSHIFT_GLOBAL_DISCOVERY_ENABLED}

KIE_SERVER_CONTROLLER_OPENSHIFT_PREFER_KIESERVER_SERVICE

If OpenShift integration of Business Central is turned on, setting this parameter to true enables connection to KIE Server via an OpenShift internal Service endpoint. (Sets the org.kie.server.controller.openshift.prefer.kieserver.service system property)

${KIE_SERVER_CONTROLLER_OPENSHIFT_PREFER_KIESERVER_SERVICE}

KIE_SERVER_CONTROLLER_TEMPLATE_CACHE_TTL

KIE ServerTemplate Cache TTL in milliseconds. (Sets the org.kie.server.controller.template.cache.ttl system property)

${KIE_SERVER_CONTROLLER_TEMPLATE_CACHE_TTL}

KIE_WORKBENCH_CONTROLLER_OPENSHIFT_ENABLED

 — 

true

KIE_SERVER_CONTROLLER_USER

KIE server controller user name. (Sets the org.kie.server.controller.user system property)

${KIE_SERVER_CONTROLLER_USER}

KIE_SERVER_CONTROLLER_PWD

KIE server controller password. (Sets the org.kie.server.controller.pwd system property)

${KIE_SERVER_CONTROLLER_PWD}

KIE_SERVER_CONTROLLER_TOKEN

KIE server controller token for bearer authentication. (Sets the org.kie.server.controller.token system property)

${KIE_SERVER_CONTROLLER_TOKEN}

KIE_SERVER_USER

KIE server user name. (Sets the org.kie.server.user system property)

${KIE_SERVER_USER}

KIE_SERVER_PWD

KIE server password. (Sets the org.kie.server.pwd system property)

${KIE_SERVER_PWD}

WORKBENCH_ROUTE_NAME

 — 

${APPLICATION_NAME}-rhdmcentr

MAVEN_MIRROR_URL

Maven mirror that Decision Central and KIE server must use. If you configure a mirror, this mirror must contain all artifacts that are required for building and deploying your services.

${MAVEN_MIRROR_URL}

MAVEN_REPO_ID

The id to use for the maven repository. If set, it can be excluded from the optionally configured mirror by adding it to MAVEN_MIRROR_OF. For example: external:*,!repo-rhdmcentr,!repo-custom. If MAVEN_MIRROR_URL is set but MAVEN_MIRROR_ID is not set, an id will be generated randomly, but won’t be usable in MAVEN_MIRROR_OF.

${MAVEN_REPO_ID}

MAVEN_REPO_URL

Fully qualified URL to a Maven repository or service.

${MAVEN_REPO_URL}

MAVEN_REPO_USERNAME

User name for accessing the Maven repository, if required.

${MAVEN_REPO_USERNAME}

MAVEN_REPO_PASSWORD

Password to access the Maven repository, if required.

${MAVEN_REPO_PASSWORD}

KIE_MAVEN_USER

User name for accessing the Maven service hosted by Decision Central inside EAP.

${DECISION_CENTRAL_MAVEN_USERNAME}

KIE_MAVEN_PWD

Password to access the Maven service hosted by Decision Central inside EAP.

${DECISION_CENTRAL_MAVEN_PASSWORD}

GIT_HOOKS_DIR

The directory to use for git hooks, if required.

${GIT_HOOKS_DIR}

HTTPS_KEYSTORE_DIR

 — 

/etc/decisioncentral-secret-volume

HTTPS_KEYSTORE

The name of the keystore file within the secret for Decision Central.

${DECISION_CENTRAL_HTTPS_KEYSTORE}

HTTPS_NAME

The name associated with the server certificate for Decision Central.

${DECISION_CENTRAL_HTTPS_NAME}

HTTPS_PASSWORD

The password for the keystore and certificate for Decision Central.

${DECISION_CENTRAL_HTTPS_PASSWORD}

JGROUPS_PING_PROTOCOL

 — 

openshift.DNS_PING

OPENSHIFT_DNS_PING_SERVICE_NAME

 — 

${APPLICATION_NAME}-rhdmcentr-ping

OPENSHIFT_DNS_PING_SERVICE_PORT

 — 

8888

APPFORMER_INFINISPAN_SERVICE_NAME

 — 

${APPLICATION_NAME}-datagrid

APPFORMER_INFINISPAN_PORT

 — 

11222

APPFORMER_JMS_BROKER_ADDRESS

 — 

${APPLICATION_NAME}-amq-tcp

APPFORMER_JMS_BROKER_PORT

 — 

61616

APPFORMER_JMS_BROKER_USER

The user name to connect to the JMS broker.

${APPFORMER_JMS_BROKER_USER}

APPFORMER_JMS_BROKER_PASSWORD

The password to connect to the JMS broker.

${APPFORMER_JMS_BROKER_PASSWORD}

JAVA_MAX_MEM_RATIO

Decision Central Container JVM maximum memory ratio. -Xmx is set to a ratio of the memory available on the container. The default is 80, which means the upper boundary is 80% of the available memory. To skip adding the -Xmx option, set this value to 0.

${DECISION_CENTRAL_JAVA_MAX_MEM_RATIO}

SSO_URL

RH-SSO URL.

${SSO_URL}

SSO_OPENIDCONNECT_DEPLOYMENTS

 — 

ROOT.war

SSO_REALM

RH-SSO Realm name.

${SSO_REALM}

SSO_SECRET

Decision Central RH-SSO Client Secret.

${DECISION_CENTRAL_SSO_SECRET}

SSO_CLIENT

Decision Central RH-SSO Client name.

${DECISION_CENTRAL_SSO_CLIENT}

SSO_USERNAME

RH-SSO Realm admin user name used to create the Client if it doesn’t exist.

${SSO_USERNAME}

SSO_PASSWORD

RH-SSO Realm Admin Password used to create the Client.

${SSO_PASSWORD}

SSO_DISABLE_SSL_CERTIFICATE_VALIDATION

RH-SSO Disable SSL Certificate Validation.

${SSO_DISABLE_SSL_CERTIFICATE_VALIDATION}

SSO_PRINCIPAL_ATTRIBUTE

RH-SSO Principal Attribute to use as user name.

${SSO_PRINCIPAL_ATTRIBUTE}

HOSTNAME_HTTP

Custom hostname for http service route for Decision Central. Leave blank for default hostname, e.g.: insecure-<application-name>-rhdmcentr-<project>.<default-domain-suffix>

${DECISION_CENTRAL_HOSTNAME_HTTP}

HOSTNAME_HTTPS

Custom hostname for https service route for Decision Central. Leave blank for default hostname, e.g.: <application-name>-rhdmcentr-<project>.<default-domain-suffix>

${DECISION_CENTRAL_HOSTNAME_HTTPS}

AUTH_LDAP_URL

LDAP Endpoint to connect for authentication.

${AUTH_LDAP_URL}

AUTH_LDAP_BIND_DN

Bind DN used for authentication.

${AUTH_LDAP_BIND_DN}

AUTH_LDAP_BIND_CREDENTIAL

LDAP Credentials used for authentication.

${AUTH_LDAP_BIND_CREDENTIAL}

AUTH_LDAP_JAAS_SECURITY_DOMAIN

The JMX ObjectName of the JaasSecurityDomain used to decrypt the password.

${AUTH_LDAP_JAAS_SECURITY_DOMAIN}

AUTH_LDAP_BASE_CTX_DN

LDAP Base DN of the top-level context to begin the user search.

${AUTH_LDAP_BASE_CTX_DN}

AUTH_LDAP_BASE_FILTER

LDAP search filter used to locate the context of the user to authenticate. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. A common example for the search filter is (uid={0}).

${AUTH_LDAP_BASE_FILTER}

AUTH_LDAP_SEARCH_SCOPE

The search scope to use.

${AUTH_LDAP_SEARCH_SCOPE}

AUTH_LDAP_SEARCH_TIME_LIMIT

The timeout in milliseconds for user or role searches.

${AUTH_LDAP_SEARCH_TIME_LIMIT}

AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE

The name of the attribute in the user entry that contains the DN of the user. This may be necessary if the DN of the user itself contains special characters, backslash for example, that prevent correct user mapping. If the attribute does not exist, the entry’s DN is used.

${AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE}

AUTH_LDAP_PARSE_USERNAME

A flag indicating if the DN is to be parsed for the user name. If set to true, the DN is parsed for the user name. If set to false the DN is not parsed for the user name. This option is used together with usernameBeginString and usernameEndString.

${AUTH_LDAP_PARSE_USERNAME}

AUTH_LDAP_USERNAME_BEGIN_STRING

Defines the String which is to be removed from the start of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

${AUTH_LDAP_USERNAME_BEGIN_STRING}

AUTH_LDAP_USERNAME_END_STRING

Defines the String which is to be removed from the end of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

${AUTH_LDAP_USERNAME_END_STRING}

AUTH_LDAP_ROLE_ATTRIBUTE_ID

Name of the attribute containing the user roles.

${AUTH_LDAP_ROLE_ATTRIBUTE_ID}

AUTH_LDAP_ROLES_CTX_DN

The fixed DN of the context to search for user roles. This is not the DN where the actual roles are, but the DN where the objects containing the user roles are. For example, in a Microsoft Active Directory server, this is the DN where the user account is.

${AUTH_LDAP_ROLES_CTX_DN}

AUTH_LDAP_ROLE_FILTER

A search filter used to locate the roles associated with the authenticated user. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. The authenticated userDN is substituted into the filter anywhere a {1} is used. An example search filter that matches on the input username is (member={0}). An alternative that matches on the authenticated userDN is (member={1}).

${AUTH_LDAP_ROLE_FILTER}

AUTH_LDAP_ROLE_RECURSION

The number of levels of recursion the role search will go below a matching context. Disable recursion by setting this to 0.

${AUTH_LDAP_ROLE_RECURSION}

AUTH_LDAP_DEFAULT_ROLE

A role included for all authenticated users

${AUTH_LDAP_DEFAULT_ROLE}

AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID

Name of the attribute within the roleCtxDN context which contains the role name. If the roleAttributeIsDN property is set to true, this property is used to find the role object’s name attribute.

${AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID}

AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN

A flag indicating if the DN returned by a query contains the roleNameAttributeID. If set to true, the DN is checked for the roleNameAttributeID. If set to false, the DN is not checked for the roleNameAttributeID. This flag can improve the performance of LDAP queries.

${AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN}

AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN

Whether or not the roleAttributeID contains the fully-qualified DN of a role object. If false, the role name is taken from the value of the roleNameAttributeId attribute of the context name. Certain directory schemas, such as Microsoft Active Directory, require this attribute to be set to true.

${AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN}

AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK

If you are not using referrals, you can ignore this option. When using referrals, this option denotes the attribute name which contains users defined for a certain role, for example member, if the role object is inside the referral. Users are checked against the content of this attribute name. If this option is not set, the check will always fail, so role objects cannot be stored in a referral tree.

${AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK}

AUTH_ROLE_MAPPER_ROLES_PROPERTIES

When present, the RoleMapping Login Module will be configured to use the provided file. This parameter defines the fully-qualified file path and name of a properties file or resource which maps roles to replacement roles. The format is original_role=role1,role2,role3

${AUTH_ROLE_MAPPER_ROLES_PROPERTIES}

AUTH_ROLE_MAPPER_REPLACE_ROLE

Whether to add to the current roles, or replace the current roles with the mapped ones. Replaces if set to true.

${AUTH_ROLE_MAPPER_REPLACE_ROLE}

${APPLICATION_NAME}-kieserver

WORKBENCH_SERVICE_NAME

 — 

${APPLICATION_NAME}-rhdmcentr

KIE_ADMIN_USER

KIE administrator user name.

${KIE_ADMIN_USER}

KIE_ADMIN_PWD

KIE administrator password.

${KIE_ADMIN_PWD}

KIE_SERVER_MODE

The KIE Server mode. Valid values are 'DEVELOPMENT' or 'PRODUCTION'. In production mode, you can not deploy SNAPSHOT versions of artifacts on the KIE server and can not change the version of an artifact in an existing container. (Sets the org.kie.server.mode system property).

${KIE_SERVER_MODE}

KIE_MBEANS

KIE server mbeans enabled/disabled. (Sets the kie.mbeans and kie.scanner.mbeans system properties)

${KIE_MBEANS}

DROOLS_SERVER_FILTER_CLASSES

KIE server class filtering. (Sets the org.drools.server.filter.classes system property)

${DROOLS_SERVER_FILTER_CLASSES}

PROMETHEUS_SERVER_EXT_DISABLED

If set to false, the prometheus server extension will be enabled. (Sets the org.kie.prometheus.server.ext.disabled system property)

${PROMETHEUS_SERVER_EXT_DISABLED}

KIE_SERVER_BYPASS_AUTH_USER

Allows the KIE server to bypass the authenticated user for task-related operations, for example, queries. (Sets the org.kie.server.bypass.auth.user system property)

${KIE_SERVER_BYPASS_AUTH_USER}

KIE_SERVER_ID

 — 

 — 

KIE_SERVER_ROUTE_NAME

 — 

${APPLICATION_NAME}-kieserver

KIE_SERVER_STARTUP_STRATEGY

 — 

OpenShiftStartupStrategy

KIE_SERVER_PWD

KIE server password. (Sets the org.kie.server.pwd system property)

${KIE_SERVER_PWD}

KIE_SERVER_USER

KIE server user name. (Sets the org.kie.server.user system property)

${KIE_SERVER_USER}

MAVEN_MIRROR_URL

Maven mirror that Decision Central and KIE server must use. If you configure a mirror, this mirror must contain all artifacts that are required for building and deploying your services.

${MAVEN_MIRROR_URL}

MAVEN_MIRROR_OF

Maven mirror configuration for KIE server.

${MAVEN_MIRROR_OF}

MAVEN_REPOS

 — 

RHDMCENTR,EXTERNAL

RHDMCENTR_MAVEN_REPO_ID

 — 

repo-rhdmcentr

RHDMCENTR_MAVEN_REPO_SERVICE

 — 

${APPLICATION_NAME}-rhdmcentr

RHDMCENTR_MAVEN_REPO_PATH

 — 

/maven2/

RHDMCENTR_MAVEN_REPO_USERNAME

User name for accessing the Maven service hosted by Decision Central inside EAP.

${DECISION_CENTRAL_MAVEN_USERNAME}

RHDMCENTR_MAVEN_REPO_PASSWORD

Password to access the Maven service hosted by Decision Central inside EAP.

${DECISION_CENTRAL_MAVEN_PASSWORD}

EXTERNAL_MAVEN_REPO_ID

The id to use for the maven repository. If set, it can be excluded from the optionally configured mirror by adding it to MAVEN_MIRROR_OF. For example: external:*,!repo-rhdmcentr,!repo-custom. If MAVEN_MIRROR_URL is set but MAVEN_MIRROR_ID is not set, an id will be generated randomly, but won’t be usable in MAVEN_MIRROR_OF.

${MAVEN_REPO_ID}

EXTERNAL_MAVEN_REPO_URL

Fully qualified URL to a Maven repository or service.

${MAVEN_REPO_URL}

EXTERNAL_MAVEN_REPO_USERNAME

User name for accessing the Maven repository, if required.

${MAVEN_REPO_USERNAME}

EXTERNAL_MAVEN_REPO_PASSWORD

Password to access the Maven repository, if required.

${MAVEN_REPO_PASSWORD}

HTTPS_KEYSTORE_DIR

 — 

/etc/kieserver-secret-volume

HTTPS_KEYSTORE

The name of the keystore file within the secret for KIE Server.

${KIE_SERVER_HTTPS_KEYSTORE}

HTTPS_NAME

The name associated with the server certificate for KIE Server.

${KIE_SERVER_HTTPS_NAME}

HTTPS_PASSWORD

The password for the keystore and certificate for KIE Server.

${KIE_SERVER_HTTPS_PASSWORD}

SSO_URL

RH-SSO URL.

${SSO_URL}

SSO_OPENIDCONNECT_DEPLOYMENTS

 — 

ROOT.war

SSO_REALM

RH-SSO Realm name.

${SSO_REALM}

SSO_SECRET

KIE Server RH-SSO Client Secret.

${KIE_SERVER_SSO_SECRET}

SSO_CLIENT

KIE Server RH-SSO Client name.

${KIE_SERVER_SSO_CLIENT}

SSO_USERNAME

RH-SSO Realm admin user name used to create the Client if it doesn’t exist.

${SSO_USERNAME}

SSO_PASSWORD

RH-SSO Realm Admin Password used to create the Client.

${SSO_PASSWORD}

SSO_DISABLE_SSL_CERTIFICATE_VALIDATION

RH-SSO Disable SSL Certificate Validation.

${SSO_DISABLE_SSL_CERTIFICATE_VALIDATION}

SSO_PRINCIPAL_ATTRIBUTE

RH-SSO Principal Attribute to use as user name.

${SSO_PRINCIPAL_ATTRIBUTE}

HOSTNAME_HTTP

Custom hostname for http service route for KIE Server. Leave blank for default hostname, e.g.: insecure-<application-name>-kieserver-<project>.<default-domain-suffix>

${KIE_SERVER_HOSTNAME_HTTP}

HOSTNAME_HTTPS

Custom hostname for https service route for KIE Server. Leave blank for default hostname, e.g.: <application-name>-kieserver-<project>.<default-domain-suffix>

${KIE_SERVER_HOSTNAME_HTTPS}

AUTH_LDAP_URL

LDAP Endpoint to connect for authentication.

${AUTH_LDAP_URL}

AUTH_LDAP_BIND_DN

Bind DN used for authentication.

${AUTH_LDAP_BIND_DN}

AUTH_LDAP_BIND_CREDENTIAL

LDAP Credentials used for authentication.

${AUTH_LDAP_BIND_CREDENTIAL}

AUTH_LDAP_JAAS_SECURITY_DOMAIN

The JMX ObjectName of the JaasSecurityDomain used to decrypt the password.

${AUTH_LDAP_JAAS_SECURITY_DOMAIN}

AUTH_LDAP_BASE_CTX_DN

LDAP Base DN of the top-level context to begin the user search.

${AUTH_LDAP_BASE_CTX_DN}

AUTH_LDAP_BASE_FILTER

LDAP search filter used to locate the context of the user to authenticate. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. A common example for the search filter is (uid={0}).

${AUTH_LDAP_BASE_FILTER}

AUTH_LDAP_SEARCH_SCOPE

The search scope to use.

${AUTH_LDAP_SEARCH_SCOPE}

AUTH_LDAP_SEARCH_TIME_LIMIT

The timeout in milliseconds for user or role searches.

${AUTH_LDAP_SEARCH_TIME_LIMIT}

AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE

The name of the attribute in the user entry that contains the DN of the user. This may be necessary if the DN of the user itself contains special characters, backslash for example, that prevent correct user mapping. If the attribute does not exist, the entry’s DN is used.

${AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE}

AUTH_LDAP_PARSE_USERNAME

A flag indicating if the DN is to be parsed for the user name. If set to true, the DN is parsed for the user name. If set to false the DN is not parsed for the user name. This option is used together with usernameBeginString and usernameEndString.

${AUTH_LDAP_PARSE_USERNAME}

AUTH_LDAP_USERNAME_BEGIN_STRING

Defines the String which is to be removed from the start of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

${AUTH_LDAP_USERNAME_BEGIN_STRING}

AUTH_LDAP_USERNAME_END_STRING

Defines the String which is to be removed from the end of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

${AUTH_LDAP_USERNAME_END_STRING}

AUTH_LDAP_ROLE_ATTRIBUTE_ID

Name of the attribute containing the user roles.

${AUTH_LDAP_ROLE_ATTRIBUTE_ID}

AUTH_LDAP_ROLES_CTX_DN

The fixed DN of the context to search for user roles. This is not the DN where the actual roles are, but the DN where the objects containing the user roles are. For example, in a Microsoft Active Directory server, this is the DN where the user account is.

${AUTH_LDAP_ROLES_CTX_DN}

AUTH_LDAP_ROLE_FILTER

A search filter used to locate the roles associated with the authenticated user. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. The authenticated userDN is substituted into the filter anywhere a {1} is used. An example search filter that matches on the input username is (member={0}). An alternative that matches on the authenticated userDN is (member={1}).

${AUTH_LDAP_ROLE_FILTER}

AUTH_LDAP_ROLE_RECURSION

The number of levels of recursion the role search will go below a matching context. Disable recursion by setting this to 0.

${AUTH_LDAP_ROLE_RECURSION}

AUTH_LDAP_DEFAULT_ROLE

A role included for all authenticated users

${AUTH_LDAP_DEFAULT_ROLE}

AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID

Name of the attribute within the roleCtxDN context which contains the role name. If the roleAttributeIsDN property is set to true, this property is used to find the role object’s name attribute.

${AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID}

AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN

A flag indicating if the DN returned by a query contains the roleNameAttributeID. If set to true, the DN is checked for the roleNameAttributeID. If set to false, the DN is not checked for the roleNameAttributeID. This flag can improve the performance of LDAP queries.

${AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN}

AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN

Whether or not the roleAttributeID contains the fully-qualified DN of a role object. If false, the role name is taken from the value of the roleNameAttributeId attribute of the context name. Certain directory schemas, such as Microsoft Active Directory, require this attribute to be set to true.

${AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN}

AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK

If you are not using referrals, you can ignore this option. When using referrals, this option denotes the attribute name which contains users defined for a certain role, for example member, if the role object is inside the referral. Users are checked against the content of this attribute name. If this option is not set, the check will always fail, so role objects cannot be stored in a referral tree.

${AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK}

AUTH_ROLE_MAPPER_ROLES_PROPERTIES

When present, the RoleMapping Login Module will be configured to use the provided file. This parameter defines the fully-qualified file path and name of a properties file or resource which maps roles to replacement roles. The format is original_role=role1,role2,role3

${AUTH_ROLE_MAPPER_ROLES_PROPERTIES}

AUTH_ROLE_MAPPER_REPLACE_ROLE

Whether to add to the current roles, or replace the current roles with the mapped ones. Replaces if set to true.

${AUTH_ROLE_MAPPER_REPLACE_ROLE}

5.2.2.3.3.7. Volumes
DeploymentNamemountPathPurposereadOnly

${APPLICATION_NAME}-rhdmcentr

decisioncentral-keystore-volume

/etc/decisioncentral-secret-volume

ssl certs

True

${APPLICATION_NAME}-kieserver

kieserver-keystore-volume

/etc/kieserver-secret-volume

ssl certs

True

5.2.2.4. External Dependencies
5.2.2.4.1. Volume Claims

A PersistentVolume object is a storage resource in an OpenShift cluster. Storage is provisioned by an administrator by creating PersistentVolume objects from sources such as GCE Persistent Disks, AWS Elastic Block Stores (EBS), and NFS mounts. Refer to the Openshift documentation for more information.

NameAccess Mode

${APPLICATION_NAME}-rhdmcentr-claim

ReadWriteMany

5.2.2.4.2. Secrets

This template requires the following secrets to be installed for the application to run.

decisioncentral-app-secret kieserver-app-secret

5.2.2.4.3. Clustering

Clustering in OpenShift EAP is achieved through one of two discovery mechanisms: Kubernetes or DNS. This is done by configuring the JGroups protocol stack in standalone-openshift.xml with either the <openshift.KUBE_PING/> or <openshift.DNS_PING/> elements. The templates are configured to use DNS_PING, however `KUBE_PING`is the default used by the image.

The discovery mechanism used is specified by the JGROUPS_PING_PROTOCOL environment variable which can be set to either openshift.DNS_PING or openshift.KUBE_PING. openshift.KUBE_PING is the default used by the image if no value is specified for JGROUPS_PING_PROTOCOL.

For DNS_PING to work, the following steps must be taken:

  1. The OPENSHIFT_DNS_PING_SERVICE_NAME environment variable must be set to the name of the ping service for the cluster (see table above). If not set, the server will act as if it is a single-node cluster (a "cluster of one").
  2. The OPENSHIFT_DNS_PING_SERVICE_PORT environment variables should be set to the port number on which the ping service is exposed (see table above). The DNS_PING protocol will attempt to discern the port from the SRV records, if it can, otherwise it will default to 8888.

  3. A ping service which exposes the ping port must be defined. This service should be "headless" (ClusterIP=None) and must have the following:

    1. The port must be named for port discovery to work.
    2. It must be annotated with service.alpha.kubernetes.io/tolerate-unready-endpoints set to "true". Omitting this annotation will result in each node forming their own "cluster of one" during startup, then merging their cluster into the other nodes' clusters after startup (as the other nodes are not detected until after they have started).

Example ping service for use with DNS_PING

kind: Service
apiVersion: v1
spec:
    clusterIP: None
    ports:
    - name: ping
      port: 8888
    selector:
        deploymentConfig: eap-app
metadata:
    name: eap-app-ping
    annotations:
        service.alpha.kubernetes.io/tolerate-unready-endpoints: "true"
        description: "The JGroups ping port for clustering."

For KUBE_PING to work, the following steps must be taken:

  1. The OPENSHIFT_KUBE_PING_NAMESPACE environment variable must be set (see table above). If not set, the server will act as if it is a single-node cluster (a "cluster of one").
  2. The OPENSHIFT_KUBE_PING_LABELS environment variables should be set (see table above). If not set, pods outside of your application (albeit in your namespace) will try to join.
  3. Authorization must be granted to the service account the pod is running under to be allowed to access Kubernetes' REST api. This is done on the command line.

Example 5.1. Policy commands

Using the default service account in the myproject namespace: 

oc policy add-role-to-user view system:serviceaccount:myproject:default -n myproject

Using the eap-service-account in the myproject namespace: 

oc policy add-role-to-user view system:serviceaccount:myproject:eap-service-account -n myproject

5.3. rhdm76-kieserver.yaml template

Application template for a managed KIE Server, for Red Hat Decision Manager 7.6 - Deprecated

5.3.1. Parameters

Templates allow you to define parameters which take on a value. That value is then substituted wherever the parameter is referenced. References can be defined in any text field in the objects list field. Refer to the Openshift documentation for more information.

Variable nameImage Environment VariableDescriptionExample valueRequired

APPLICATION_NAME

 — 

The name for the application.

myapp

True

MAVEN_MIRROR_URL

MAVEN_MIRROR_URL

Maven mirror that KIE server must use. If you configure a mirror, this mirror must contain all artifacts that are required for deploying your services.

 — 

False

MAVEN_MIRROR_OF

MAVEN_MIRROR_OF

Maven mirror configuration for KIE server.

external:*

False

MAVEN_REPO_ID

EXTERNAL_MAVEN_REPO_ID

The id to use for the maven repository. If set, it can be excluded from the optionally configured mirror by adding it to MAVEN_MIRROR_OF. For example: external:*,!repo-rhdmcentr,!repo-custom. If MAVEN_MIRROR_URL is set but MAVEN_MIRROR_ID is not set, an id will be generated randomly, but won’t be usable in MAVEN_MIRROR_OF.

repo-custom

False

MAVEN_REPO_URL

EXTERNAL_MAVEN_REPO_URL

Fully qualified URL to a Maven repository or service.

http://nexus.nexus-project.svc.cluster.local:8081/nexus/content/groups/public/

True

MAVEN_REPO_USERNAME

EXTERNAL_MAVEN_REPO_USERNAME

User name for accessing the Maven repository, if required.

 — 

False

MAVEN_REPO_PASSWORD

EXTERNAL_MAVEN_REPO_PASSWORD

Password to access the Maven repository, if required.

 — 

False

DECISION_CENTRAL_SERVICE

WORKBENCH_SERVICE_NAME

The Service name for the optional Decision Central, where it can be reached, to allow service lookups (for example, maven repo usage), if required.

myapp-rhdmcentr

False

DECISION_CENTRAL_MAVEN_USERNAME

RHDMCENTR_MAVEN_REPO_USERNAME

User name for accessing the Maven service hosted by Decision Central inside EAP.

mavenUser

False

DECISION_CENTRAL_MAVEN_PASSWORD

RHDMCENTR_MAVEN_REPO_PASSWORD

Password to access the Maven service hosted by Decision Central inside EAP.

maven1!

False

KIE_ADMIN_USER

KIE_ADMIN_USER

KIE administrator user name.

adminUser

False

KIE_ADMIN_PWD

KIE_ADMIN_PWD

KIE administrator password.

 — 

False

KIE_SERVER_USER

KIE_SERVER_USER

KIE server user name. (Sets the org.kie.server.user system property)

executionUser

False

KIE_SERVER_PWD

KIE_SERVER_PWD

KIE server password. (Sets the org.kie.server.pwd system property)

 — 

False

IMAGE_STREAM_NAMESPACE

 — 

Namespace in which the ImageStreams for Red Hat Decision Manager images are installed. These ImageStreams are normally installed in the openshift namespace. You should only need to modify this if you installed the ImageStreams in a different namespace/project.

openshift

True

KIE_SERVER_IMAGE_STREAM_NAME

 — 

The name of the image stream to use for KIE server. Default is "rhdm-kieserver-rhel8".

rhdm-kieserver-rhel8

True

IMAGE_STREAM_TAG

 — 

A named pointer to an image in an image stream. Default is "7.6.0".

7.6.0

True

KIE_SERVER_MODE

KIE_SERVER_MODE

The KIE Server mode. Valid values are 'DEVELOPMENT' or 'PRODUCTION'. In production mode, you can not deploy SNAPSHOT versions of artifacts on the KIE server and can not change the version of an artifact in an existing container. (Sets the org.kie.server.mode system property).

PRODUCTION

False

KIE_MBEANS

KIE_MBEANS

KIE server mbeans enabled/disabled. (Sets the kie.mbeans and kie.scanner.mbeans system properties)

enabled

False

DROOLS_SERVER_FILTER_CLASSES

DROOLS_SERVER_FILTER_CLASSES

KIE server class filtering. (Sets the org.drools.server.filter.classes system property)

true

False

PROMETHEUS_SERVER_EXT_DISABLED

PROMETHEUS_SERVER_EXT_DISABLED

If set to false, the prometheus server extension will be enabled. (Sets the org.kie.prometheus.server.ext.disabled system property)

false

False

KIE_SERVER_HOSTNAME_HTTP

HOSTNAME_HTTP

Custom hostname for http service route. Leave blank for default hostname, e.g.: insecure-<application-name>-kieserver-<project>.<default-domain-suffix>

 — 

False

KIE_SERVER_HOSTNAME_HTTPS

HOSTNAME_HTTPS

Custom hostname for https service route. Leave blank for default hostname, e.g.: <application-name>-kieserver-<project>.<default-domain-suffix>

 — 

False

KIE_SERVER_HTTPS_SECRET

 — 

The name of the secret containing the keystore file.

kieserver-app-secret

True

KIE_SERVER_HTTPS_KEYSTORE

HTTPS_KEYSTORE

The name of the keystore file within the secret.

keystore.jks

False

KIE_SERVER_HTTPS_NAME

HTTPS_NAME

The name associated with the server certificate.

jboss

False

KIE_SERVER_HTTPS_PASSWORD

HTTPS_PASSWORD

The password for the keystore and certificate.

mykeystorepass

False

KIE_SERVER_BYPASS_AUTH_USER

KIE_SERVER_BYPASS_AUTH_USER

Allows the KIE server to bypass the authenticated user for task-related operations, for example, queries. (Sets the org.kie.server.bypass.auth.user system property)

false

False

KIE_SERVER_MEMORY_LIMIT

 — 

KIE server Container memory limit.

1Gi

False

KIE_SERVER_CONTAINER_DEPLOYMENT

KIE_SERVER_CONTAINER_DEPLOYMENT

KIE Server Container deployment configuration with optional alias. Format: containerId=groupId:artifactId:version|c2(alias2)=g2:a2:v2

rhdm-kieserver-library=org.openshift.quickstarts:rhdm-kieserver-library:1.6.0-SNAPSHOT

False

KIE_SERVER_MGMT_DISABLED

KIE_SERVER_MGMT_DISABLED

Disable management api and don’t allow KIE containers to be deployed/undeployed or started/stopped. Sets the property org.kie.server.mgmt.api.disabled to true and org.kie.server.startup.strategy to LocalContainersStartupStrategy.

true

False

SSO_URL

SSO_URL

RH-SSO URL.

https://rh-sso.example.com/auth

False

SSO_REALM

SSO_REALM

RH-SSO Realm name.

 — 

False

KIE_SERVER_SSO_CLIENT

SSO_CLIENT

KIE Server RH-SSO Client name.

 — 

False

KIE_SERVER_SSO_SECRET

SSO_SECRET

KIE Server RH-SSO Client Secret

252793ed-7118-4ca8-8dab-5622fa97d892

False

SSO_USERNAME

SSO_USERNAME

RH-SSO Realm admin user name used to create the Client if it doesn’t exist.

 — 

False

SSO_PASSWORD

SSO_PASSWORD

RH-SSO Realm Admin Password used to create the Client.

 — 

False

SSO_DISABLE_SSL_CERTIFICATE_VALIDATION

SSO_DISABLE_SSL_CERTIFICATE_VALIDATION

RH-SSO Disable SSL Certificate Validation.

false

False

SSO_PRINCIPAL_ATTRIBUTE

SSO_PRINCIPAL_ATTRIBUTE

RH-SSO Principal Attribute to use as user name.

preferred_username

False

AUTH_LDAP_URL

AUTH_LDAP_URL

LDAP Endpoint to connect for authentication.

ldap://myldap.example.com

False

AUTH_LDAP_BIND_DN

AUTH_LDAP_BIND_DN

Bind DN used for authentication.

uid=admin,ou=users,ou=example,ou=com

False

AUTH_LDAP_BIND_CREDENTIAL

AUTH_LDAP_BIND_CREDENTIAL

LDAP Credentials used for authentication.

Password

False

AUTH_LDAP_JAAS_SECURITY_DOMAIN

AUTH_LDAP_JAAS_SECURITY_DOMAIN

The JMX ObjectName of the JaasSecurityDomain used to decrypt the password.

 — 

False

AUTH_LDAP_BASE_CTX_DN

AUTH_LDAP_BASE_CTX_DN

LDAP Base DN of the top-level context to begin the user search.

ou=users,ou=example,ou=com

False

AUTH_LDAP_BASE_FILTER

AUTH_LDAP_BASE_FILTER

LDAP search filter used to locate the context of the user to authenticate. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. A common example for the search filter is (uid={0}).

(uid={0})

False

AUTH_LDAP_SEARCH_SCOPE

AUTH_LDAP_SEARCH_SCOPE

The search scope to use.

SUBTREE_SCOPE

False

AUTH_LDAP_SEARCH_TIME_LIMIT

AUTH_LDAP_SEARCH_TIME_LIMIT

The timeout in milliseconds for user or role searches.

10000

False

AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE

AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE

The name of the attribute in the user entry that contains the DN of the user. This may be necessary if the DN of the user itself contains special characters, backslash for example, that prevent correct user mapping. If the attribute does not exist, the entry’s DN is used.

distinguishedName

False

AUTH_LDAP_PARSE_USERNAME

AUTH_LDAP_PARSE_USERNAME

A flag indicating if the DN is to be parsed for the user name. If set to true, the DN is parsed for the user name. If set to false the DN is not parsed for the user name. This option is used together with usernameBeginString and usernameEndString.

true

False

AUTH_LDAP_USERNAME_BEGIN_STRING

AUTH_LDAP_USERNAME_BEGIN_STRING

Defines the String which is to be removed from the start of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

 — 

False

AUTH_LDAP_USERNAME_END_STRING

AUTH_LDAP_USERNAME_END_STRING

Defines the String which is to be removed from the end of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

 — 

False

AUTH_LDAP_ROLE_ATTRIBUTE_ID

AUTH_LDAP_ROLE_ATTRIBUTE_ID

Name of the attribute containing the user roles.

memberOf

False

AUTH_LDAP_ROLES_CTX_DN

AUTH_LDAP_ROLES_CTX_DN

The fixed DN of the context to search for user roles. This is not the DN where the actual roles are, but the DN where the objects containing the user roles are. For example, in a Microsoft Active Directory server, this is the DN where the user account is.

ou=groups,ou=example,ou=com

False

AUTH_LDAP_ROLE_FILTER

AUTH_LDAP_ROLE_FILTER

A search filter used to locate the roles associated with the authenticated user. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. The authenticated userDN is substituted into the filter anywhere a {1} is used. An example search filter that matches on the input username is (member={0}). An alternative that matches on the authenticated userDN is (member={1}).

(memberOf={1})

False

AUTH_LDAP_ROLE_RECURSION

AUTH_LDAP_ROLE_RECURSION

The number of levels of recursion the role search will go below a matching context. Disable recursion by setting this to 0.

1

False

AUTH_LDAP_DEFAULT_ROLE

AUTH_LDAP_DEFAULT_ROLE

A role included for all authenticated users.

user

False

AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID

AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID

Name of the attribute within the roleCtxDN context which contains the role name. If the roleAttributeIsDN property is set to true, this property is used to find the role object’s name attribute.

name

False

AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN

AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN

A flag indicating if the DN returned by a query contains the roleNameAttributeID. If set to true, the DN is checked for the roleNameAttributeID. If set to false, the DN is not checked for the roleNameAttributeID. This flag can improve the performance of LDAP queries.

false

False

AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN

AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN

Whether or not the roleAttributeID contains the fully-qualified DN of a role object. If false, the role name is taken from the value of the roleNameAttributeId attribute of the context name. Certain directory schemas, such as Microsoft Active Directory, require this attribute to be set to true.

false

False

AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK

AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK

If you are not using referrals, you can ignore this option. When using referrals, this option denotes the attribute name which contains users defined for a certain role, for example member, if the role object is inside the referral. Users are checked against the content of this attribute name. If this option is not set, the check will always fail, so role objects cannot be stored in a referral tree.

 — 

False

AUTH_ROLE_MAPPER_ROLES_PROPERTIES

AUTH_ROLE_MAPPER_ROLES_PROPERTIES

When present, the RoleMapping Login Module will be configured to use the provided file. This property defines the fully-qualified file path and name of a properties file or resource which maps roles to replacement roles. The format is original_role=role1,role2,role3

 — 

False

AUTH_ROLE_MAPPER_REPLACE_ROLE

AUTH_ROLE_MAPPER_REPLACE_ROLE

Whether to add to the current roles, or replace the current roles with the mapped ones. Replaces if set to true.

 — 

False

5.3.2. Objects

The CLI supports various object types. A list of these object types as well as their abbreviations can be found in the Openshift documentation.

5.3.2.1. Services

A service is an abstraction which defines a logical set of pods and a policy by which to access them. Refer to the container-engine documentation for more information.

ServicePortNameDescription

${APPLICATION_NAME}-kieserver

8080

http

All the KIE server web server’s ports.

8443

https

${APPLICATION_NAME}-kieserver-ping

8888

ping

The JGroups ping port for clustering.

5.3.2.2. Routes

A route is a way to expose a service by giving it an externally-reachable hostname such as www.example.com. A defined route and the endpoints identified by its service can be consumed by a router to provide named connectivity from external clients to your applications. Each route consists of a route name, service selector, and (optionally) security configuration. Refer to the Openshift documentation for more information.

ServiceSecurityHostname

insecure-${APPLICATION_NAME}-kieserver-http

none

${KIE_SERVER_HOSTNAME_HTTP}

${APPLICATION_NAME}-kieserver-https

TLS passthrough

${KIE_SERVER_HOSTNAME_HTTPS}

5.3.2.3. Deployment Configurations

A deployment in OpenShift is a replication controller based on a user defined template called a deployment configuration. Deployments are created manually or in response to triggered events. Refer to the Openshift documentation for more information.

5.3.2.3.1. Triggers

A trigger drives the creation of new deployments in response to events, both inside and outside OpenShift. Refer to the Openshift documentation for more information.

DeploymentTriggers

${APPLICATION_NAME}-kieserver

ImageChange

5.3.2.3.2. Replicas

A replication controller ensures that a specified number of pod "replicas" are running at any one time. If there are too many, the replication controller kills some pods. If there are too few, it starts more. Refer to the container-engine documentation for more information.

DeploymentReplicas

${APPLICATION_NAME}-kieserver

1

5.3.2.3.3. Pod Template
5.3.2.3.3.1. Service Accounts

Service accounts are API objects that exist within each project. They can be created or deleted like any other API object. Refer to the Openshift documentation for more information.

DeploymentService Account

${APPLICATION_NAME}-kieserver

${APPLICATION_NAME}-kieserver

5.3.2.3.3.2. Image
DeploymentImage

${APPLICATION_NAME}-kieserver

${KIE_SERVER_IMAGE_STREAM_NAME}

5.3.2.3.3.3. Readiness Probe

${APPLICATION_NAME}-kieserver

Http Get on http://localhost:8080/services/rest/server/readycheck

5.3.2.3.3.4. Liveness Probe

${APPLICATION_NAME}-kieserver

Http Get on http://localhost:8080/services/rest/server/healthcheck

5.3.2.3.3.5. Exposed Ports
DeploymentsNamePortProtocol

${APPLICATION_NAME}-kieserver

jolokia

8778

TCP

http

8080

TCP

https

8443

TCP

ping

8888

TCP

5.3.2.3.3.6. Image Environment Variables
DeploymentVariable nameDescriptionExample value

${APPLICATION_NAME}-kieserver

WORKBENCH_SERVICE_NAME

The Service name for the optional Decision Central, where it can be reached, to allow service lookups (for example, maven repo usage), if required.

${DECISION_CENTRAL_SERVICE}

KIE_ADMIN_USER

KIE administrator user name.

${KIE_ADMIN_USER}

KIE_ADMIN_PWD

KIE administrator password.

${KIE_ADMIN_PWD}

KIE_SERVER_MODE

The KIE Server mode. Valid values are 'DEVELOPMENT' or 'PRODUCTION'. In production mode, you can not deploy SNAPSHOT versions of artifacts on the KIE server and can not change the version of an artifact in an existing container. (Sets the org.kie.server.mode system property).

${KIE_SERVER_MODE}

KIE_MBEANS

KIE server mbeans enabled/disabled. (Sets the kie.mbeans and kie.scanner.mbeans system properties)

${KIE_MBEANS}

DROOLS_SERVER_FILTER_CLASSES

KIE server class filtering. (Sets the org.drools.server.filter.classes system property)

${DROOLS_SERVER_FILTER_CLASSES}

PROMETHEUS_SERVER_EXT_DISABLED

If set to false, the prometheus server extension will be enabled. (Sets the org.kie.prometheus.server.ext.disabled system property)

${PROMETHEUS_SERVER_EXT_DISABLED}

KIE_SERVER_BYPASS_AUTH_USER

Allows the KIE server to bypass the authenticated user for task-related operations, for example, queries. (Sets the org.kie.server.bypass.auth.user system property)

${KIE_SERVER_BYPASS_AUTH_USER}

KIE_SERVER_ID

 — 

 — 

KIE_SERVER_ROUTE_NAME

 — 

${APPLICATION_NAME}-kieserver

KIE_SERVER_USER

KIE server user name. (Sets the org.kie.server.user system property)

${KIE_SERVER_USER}

KIE_SERVER_PWD

KIE server password. (Sets the org.kie.server.pwd system property)

${KIE_SERVER_PWD}

KIE_SERVER_CONTAINER_DEPLOYMENT

KIE Server Container deployment configuration with optional alias. Format: containerId=groupId:artifactId:version|c2(alias2)=g2:a2:v2

${KIE_SERVER_CONTAINER_DEPLOYMENT}

MAVEN_MIRROR_URL

Maven mirror that KIE server must use. If you configure a mirror, this mirror must contain all artifacts that are required for deploying your services.

${MAVEN_MIRROR_URL}

MAVEN_MIRROR_OF

Maven mirror configuration for KIE server.

${MAVEN_MIRROR_OF}

MAVEN_REPOS

 — 

RHDMCENTR,EXTERNAL

RHDMCENTR_MAVEN_REPO_ID

 — 

repo-rhdmcentr

RHDMCENTR_MAVEN_REPO_SERVICE

The Service name for the optional Decision Central, where it can be reached, to allow service lookups (for example, maven repo usage), if required.

${DECISION_CENTRAL_SERVICE}

RHDMCENTR_MAVEN_REPO_PATH

 — 

/maven2/

RHDMCENTR_MAVEN_REPO_USERNAME

User name for accessing the Maven service hosted by Decision Central inside EAP.

${DECISION_CENTRAL_MAVEN_USERNAME}

RHDMCENTR_MAVEN_REPO_PASSWORD

Password to access the Maven service hosted by Decision Central inside EAP.

${DECISION_CENTRAL_MAVEN_PASSWORD}

EXTERNAL_MAVEN_REPO_ID

The id to use for the maven repository. If set, it can be excluded from the optionally configured mirror by adding it to MAVEN_MIRROR_OF. For example: external:*,!repo-rhdmcentr,!repo-custom. If MAVEN_MIRROR_URL is set but MAVEN_MIRROR_ID is not set, an id will be generated randomly, but won’t be usable in MAVEN_MIRROR_OF.

${MAVEN_REPO_ID}

EXTERNAL_MAVEN_REPO_URL

Fully qualified URL to a Maven repository or service.

${MAVEN_REPO_URL}

EXTERNAL_MAVEN_REPO_USERNAME

User name for accessing the Maven repository, if required.

${MAVEN_REPO_USERNAME}

EXTERNAL_MAVEN_REPO_PASSWORD

Password to access the Maven repository, if required.

${MAVEN_REPO_PASSWORD}

KIE_SERVER_MGMT_DISABLED

Disable management api and don’t allow KIE containers to be deployed/undeployed or started/stopped. Sets the property org.kie.server.mgmt.api.disabled to true and org.kie.server.startup.strategy to LocalContainersStartupStrategy.

${KIE_SERVER_MGMT_DISABLED}

KIE_SERVER_STARTUP_STRATEGY

 — 

OpenShiftStartupStrategy

HTTPS_KEYSTORE_DIR

 — 

/etc/kieserver-secret-volume

HTTPS_KEYSTORE

The name of the keystore file within the secret.

${KIE_SERVER_HTTPS_KEYSTORE}

HTTPS_NAME

The name associated with the server certificate.

${KIE_SERVER_HTTPS_NAME}

HTTPS_PASSWORD

The password for the keystore and certificate.

${KIE_SERVER_HTTPS_PASSWORD}

JGROUPS_PING_PROTOCOL

 — 

openshift.DNS_PING

OPENSHIFT_DNS_PING_SERVICE_NAME

 — 

${APPLICATION_NAME}-kieserver-ping

OPENSHIFT_DNS_PING_SERVICE_PORT

 — 

8888

SSO_URL

RH-SSO URL.

${SSO_URL}

SSO_OPENIDCONNECT_DEPLOYMENTS

 — 

ROOT.war

SSO_REALM

RH-SSO Realm name.

${SSO_REALM}

SSO_SECRET

KIE Server RH-SSO Client Secret

${KIE_SERVER_SSO_SECRET}

SSO_CLIENT

KIE Server RH-SSO Client name.

${KIE_SERVER_SSO_CLIENT}

SSO_USERNAME

RH-SSO Realm admin user name used to create the Client if it doesn’t exist.

${SSO_USERNAME}

SSO_PASSWORD

RH-SSO Realm Admin Password used to create the Client.

${SSO_PASSWORD}

SSO_DISABLE_SSL_CERTIFICATE_VALIDATION

RH-SSO Disable SSL Certificate Validation.

${SSO_DISABLE_SSL_CERTIFICATE_VALIDATION}

SSO_PRINCIPAL_ATTRIBUTE

RH-SSO Principal Attribute to use as user name.

${SSO_PRINCIPAL_ATTRIBUTE}

HOSTNAME_HTTP

Custom hostname for http service route. Leave blank for default hostname, e.g.: insecure-<application-name>-kieserver-<project>.<default-domain-suffix>

${KIE_SERVER_HOSTNAME_HTTP}

HOSTNAME_HTTPS

Custom hostname for https service route. Leave blank for default hostname, e.g.: <application-name>-kieserver-<project>.<default-domain-suffix>

${KIE_SERVER_HOSTNAME_HTTPS}

AUTH_LDAP_URL

LDAP Endpoint to connect for authentication.

${AUTH_LDAP_URL}

AUTH_LDAP_BIND_DN

Bind DN used for authentication.

${AUTH_LDAP_BIND_DN}

AUTH_LDAP_BIND_CREDENTIAL

LDAP Credentials used for authentication.

${AUTH_LDAP_BIND_CREDENTIAL}

AUTH_LDAP_JAAS_SECURITY_DOMAIN

The JMX ObjectName of the JaasSecurityDomain used to decrypt the password.

${AUTH_LDAP_JAAS_SECURITY_DOMAIN}

AUTH_LDAP_BASE_CTX_DN

LDAP Base DN of the top-level context to begin the user search.

${AUTH_LDAP_BASE_CTX_DN}

AUTH_LDAP_BASE_FILTER

LDAP search filter used to locate the context of the user to authenticate. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. A common example for the search filter is (uid={0}).

${AUTH_LDAP_BASE_FILTER}

AUTH_LDAP_SEARCH_SCOPE

The search scope to use.

${AUTH_LDAP_SEARCH_SCOPE}

AUTH_LDAP_SEARCH_TIME_LIMIT

The timeout in milliseconds for user or role searches.

${AUTH_LDAP_SEARCH_TIME_LIMIT}

AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE

The name of the attribute in the user entry that contains the DN of the user. This may be necessary if the DN of the user itself contains special characters, backslash for example, that prevent correct user mapping. If the attribute does not exist, the entry’s DN is used.

${AUTH_LDAP_DISTINGUISHED_NAME_ATTRIBUTE}

AUTH_LDAP_PARSE_USERNAME

A flag indicating if the DN is to be parsed for the user name. If set to true, the DN is parsed for the user name. If set to false the DN is not parsed for the user name. This option is used together with usernameBeginString and usernameEndString.

${AUTH_LDAP_PARSE_USERNAME}

AUTH_LDAP_USERNAME_BEGIN_STRING

Defines the String which is to be removed from the start of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

${AUTH_LDAP_USERNAME_BEGIN_STRING}

AUTH_LDAP_USERNAME_END_STRING

Defines the String which is to be removed from the end of the DN to reveal the user name. This option is used together with usernameEndString and only taken into account if parseUsername is set to true.

${AUTH_LDAP_USERNAME_END_STRING}

AUTH_LDAP_ROLE_ATTRIBUTE_ID

Name of the attribute containing the user roles.

${AUTH_LDAP_ROLE_ATTRIBUTE_ID}

AUTH_LDAP_ROLES_CTX_DN

The fixed DN of the context to search for user roles. This is not the DN where the actual roles are, but the DN where the objects containing the user roles are. For example, in a Microsoft Active Directory server, this is the DN where the user account is.

${AUTH_LDAP_ROLES_CTX_DN}

AUTH_LDAP_ROLE_FILTER

A search filter used to locate the roles associated with the authenticated user. The input username or userDN obtained from the login module callback is substituted into the filter anywhere a {0} expression is used. The authenticated userDN is substituted into the filter anywhere a {1} is used. An example search filter that matches on the input username is (member={0}). An alternative that matches on the authenticated userDN is (member={1}).

${AUTH_LDAP_ROLE_FILTER}

AUTH_LDAP_ROLE_RECURSION

The number of levels of recursion the role search will go below a matching context. Disable recursion by setting this to 0.

${AUTH_LDAP_ROLE_RECURSION}

AUTH_LDAP_DEFAULT_ROLE

A role included for all authenticated users.

${AUTH_LDAP_DEFAULT_ROLE}

AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID

Name of the attribute within the roleCtxDN context which contains the role name. If the roleAttributeIsDN property is set to true, this property is used to find the role object’s name attribute.

${AUTH_LDAP_ROLE_NAME_ATTRIBUTE_ID}

AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN

A flag indicating if the DN returned by a query contains the roleNameAttributeID. If set to true, the DN is checked for the roleNameAttributeID. If set to false, the DN is not checked for the roleNameAttributeID. This flag can improve the performance of LDAP queries.

${AUTH_LDAP_PARSE_ROLE_NAME_FROM_DN}

AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN

Whether or not the roleAttributeID contains the fully-qualified DN of a role object. If false, the role name is taken from the value of the roleNameAttributeId attribute of the context name. Certain directory schemas, such as Microsoft Active Directory, require this attribute to be set to true.

${AUTH_LDAP_ROLE_ATTRIBUTE_IS_DN}

AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK

If you are not using referrals, you can ignore this option. When using referrals, this option denotes the attribute name which contains users defined for a certain role, for example member, if the role object is inside the referral. Users are checked against the content of this attribute name. If this option is not set, the check will always fail, so role objects cannot be stored in a referral tree.

${AUTH_LDAP_REFERRAL_USER_ATTRIBUTE_ID_TO_CHECK}

AUTH_ROLE_MAPPER_ROLES_PROPERTIES

When present, the RoleMapping Login Module will be configured to use the provided file. This property defines the fully-qualified file path and name of a properties file or resource which maps roles to replacement roles. The format is original_role=role1,role2,role3

${AUTH_ROLE_MAPPER_ROLES_PROPERTIES}

AUTH_ROLE_MAPPER_REPLACE_ROLE

Whether to add to the current roles, or replace the current roles with the mapped ones. Replaces if set to true.

${AUTH_ROLE_MAPPER_REPLACE_ROLE}

5.3.2.3.3.7. Volumes
DeploymentNamemountPathPurposereadOnly

${APPLICATION_NAME}-kieserver

kieserver-keystore-volume

/etc/kieserver-secret-volume

ssl certs

True

5.3.2.4. External Dependencies
5.3.2.4.1. Secrets

This template requires the following secrets to be installed for the application to run.

kieserver-app-secret

5.4. OpenShift usage quick reference

To deploy, monitor, manage, and undeploy Red Hat Decision Manager templates on Red Hat OpenShift Container Platform, you can use the OpenShift Web console or the oc command.

For instructions about using the Web console, see Create and build an image using the Web console.

For detailed instructions about using the oc command, see CLI Reference. The following commands are likely to be required:

  • To create a project, use the following command: 

    $ oc new-project <project-name>

    For more information, see Creating a project using the CLI.

  • To deploy a template (create an application from a template), use the following command: 

    $ oc new-app -f <template-name> -p <parameter>=<value> -p <parameter>=<value> ...

    For more information, see Creating an application using the CLI.

  • To view a list of the active pods in the project, use the following command: 

    $ oc get pods

  • To view the current status of a pod, including information whether or not the pod deployment has completed and it is now in a running state, use the following command: 

    $ oc describe pod <pod-name>

    You can also use the oc describe command to view the current status of other objects. For more information, see Application modification operations.

  • To view the logs for a pod, use the following command: 

    $ oc logs <pod-name>

  • To view deployment logs, look up a DeploymentConfig name in the template reference and enter the following command: 

    $ oc logs -f dc/<deployment-config-name>

    For more information, see Viewing deployment logs.

  • To view build logs, look up a BuildConfig name in the template reference and enter the command: 

    $ oc logs -f bc/<build-config-name>

    For more information, see Accessing build logs.

  • To scale a pod in the application, look up a DeploymentConfig name in the template reference and enter the command: 

    $ oc scale dc/<deployment-config-name> --replicas=<number>

    For more information, see Manual scaling.

  • To undeploy the application, you can delete the project by using the command: 

    $ oc delete project <project-name>

    Alternatively, you can use the oc delete command to remove any part of the application, such as a pod or replication controller. For details, see Application modification operations.

Appendix A. Versioning information

Documentation last updated on Friday, June 25, 2021.

Legal Notice

Copyright © 2021 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.
Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.