Chapter 6. Technology Previews
This part provides a list of all Technology Previews available in Red Hat Enterprise Linux 9.
For information on Red Hat scope of support for Technology Preview features, see Technology Preview Features Support Scope.
6.1. RHEL for Edge
FDO process available as a Technology Preview
The FDO process for automatic provisioning and onboarding RHEL for Edge images is available as a Technology Preview. With that, you can build a RHEL for Edge Simplified Installer image, provision it to a RHEL for Edge image, and use the FDO (FIDO device onboarding) process to automatically provision and onboard your Edge devices, exchange data with other devices and systems connected on the networks. As a result, the FIDO device onboarding protocol performs device initialization at the manufacturing stage and then late binding to actually use the device.
(BZ#1989930)
6.2. Shells and command-line tools
ReaR available on the 64-bit IBM Z architecture as a Technology Preview
Basic Relax and Recover (ReaR) functionality is now available on the 64-bit IBM Z architecture as a Technology Preview. You can create a ReaR rescue image on IBM Z only in the z/VM environment. Backing up and recovering logical partitions (LPARs) has not been tested.
The only output method currently available is Initial Program Load (IPL). IPL produces a kernel and an initial ramdisk (initrd) that can be used with the zIPL bootloader.
Currently, the rescue process reformats all the DASDs (Direct Attached Storage Devices) connected to the system. Do not attempt a system recovery if there is any valuable data present on the system storage devices. This also includes the device prepared with the zIPL bootloader, ReaR kernel, and initrd that were used to boot into the rescue environment. Ensure to keep a copy.
For more information, see Using a ReaR rescue image on the 64-bit IBM Z architecture.
(BZ#2046653)
GIMP available as a Technology Preview in RHEL 9
GNU Image Manipulation Program (GIMP) 2.99.8 is now available in RHEL 9 as a Technology Preview. The gimp package version 2.99.8 is a pre-release version with a set of improvements, but a limited set of features and no guarantee for stability. As soon as the official GIMP 3 is released, it will be introduced into RHEL 9 as an update of this pre-release version.
In RHEL 9, you can install gimp easily as an RPM package.
(BZ#2047161)
6.3. Networking
WireGuard VPN is available as a Technology Preview
WireGuard, which Red Hat provides as an unsupported Technology Preview, is a high-performance VPN solution that runs in the Linux kernel. It uses modern cryptography and is easier to configure than other VPN solutions. Additionally, the small code-basis of WireGuard reduces the surface for attacks and, therefore, improves the security.
For further details, see Setting up a WireGuard VPN.
(BZ#1613522)
KTLS available as a Technology Preview
RHEL provides Kernel Transport Layer Security (KTLS) as a Technology Preview. KTLS handles TLS records using the symmetric encryption or decryption algorithms in the kernel for the AES-GCM cipher. KTLS also includes the interface for offloading TLS record encryption to Network Interface Controllers (NICs) that provides this functionality.
(BZ#1570255)
The systemd-resolved service is available as a Technology Preview
The systemd-resolved service provides name resolution to local applications. The service implements a caching and validating DNS stub resolver, an Link-Local Multicast Name Resolution (LLMNR), and Multicast DNS resolver and responder.
Note that systemd-resolved is an unsupported Technology Preview.
6.4. Kernel
The Intel data streaming accelerator driver for kernel is available as a Technology Preview
The Intel data streaming accelerator driver (IDXD) for the kernel is currently available as a Technology Preview. It is an Intel CPU integrated accelerator and includes the shared work queue with process address space ID (pasid) submission and shared virtual memory (SVM).
SGX available as a Technology Preview
Software Guard Extensions (SGX) is an Intel® technology for protecting software code and data from disclosure and modification. The RHEL kernel partially provides the SGX v1 and v1.5 functionality. The version 1 enables platforms using the Flexible Launch Control mechanism to use the SGX technology.
(BZ#1874182)
The Soft-iWARP driver is available as a Technology Preview
Soft-iWARP (siw) is a software, Internet Wide-area RDMA Protocol (iWARP), kernel driver for Linux. Soft-iWARP implements the iWARP protocol suite over the TCP/IP network stack. This protocol suite is fully implemented in software and does not require a specific Remote Direct Memory Access (RDMA) hardware. Soft-iWARP enables a system with a standard Ethernet adapter to connect to an iWARP adapter or to another system with already installed Soft-iWARP.
(BZ#2023416)
6.5. File systems and storage
DAX is now available for ext4 and XFS as a Technology Preview
In RHEL 9, the DAX file system is available as a Technology Preview. DAX provides means for an application to directly map persistent memory into its address space. To use DAX, a system must have some form of persistent memory available, usually in the form of one or more Non-Volatile Dual In-line Memory Modules (NVDIMMs), and a DAX compatible file system must be created on the NVDIMM(s). Also, the file system must be mounted with the dax mount option. Then, an mmap of a file on the dax-mounted file system results in a direct mapping of storage into the application’s address space.
(BZ#1995338)
Stratis is available as a Technology Preview
Stratis is a local storage manager. It provides managed file systems on top of pools of storage with additional features to the user:
- Manage snapshots and thin provisioning
- Automatically grow file system sizes as needed
- Maintain file systems
To administer Stratis storage, use the stratis utility, which communicates with the stratisd background service.
Stratis is provided as a Technology Preview.
For more information, see the Stratis documentation: Setting up Stratis file systems.
NVMe-oF Discovery Service features available as a Technology Preview
The NVMe-oF Discovery Service features, defined in the NVMexpress.org Technical Proposals (TP) 8013 and 8014, are available as a Technology Preview. To preview these features, use the nvme-cli 2.0 package and attach the host to an NVMe-oF target device that implements TP-8013 or TP-8014. For more information about TP-8013 and TP-8014, see the NVM Express 2.0 Ratified TPs from the https://nvmexpress.org/developers/nvme-specification/ website.
(BZ#2021672)
6.6. Compilers and development tools
jmc-core and owasp-java-encoder available as a Technology Preview
RHEL 9 is distributed with the jmc-core and owasp-java-encoder packages as Technology Preview features.
jmc-core is a library providing core APIs for Java Development Kit (JDK) Mission Control, including libraries for parsing and writing JDK Flight Recording files, as well as libraries for Java Virtual Machine (JVM) discovery through Java Discovery Protocol (JDP).
The owasp-java-encoder package provides a collection of high-performance low-overhead contextual encoders for Java.
6.7. Identity Management
DNSSEC available as Technology Preview in IdM
Identity Management (IdM) servers with integrated DNS now implement DNS Security Extensions (DNSSEC), a set of extensions to DNS that enhance security of the DNS protocol. DNS zones hosted on IdM servers can be automatically signed using DNSSEC. The cryptographic keys are automatically generated and rotated.
Users who decide to secure their DNS zones with DNSSEC are advised to read and follow these documents:
Note that IdM servers with integrated DNS use DNSSEC to validate DNS answers obtained from other DNS servers. This might affect the availability of DNS zones that are not configured in accordance with recommended naming practices.
Identity Management JSON-RPC API available as Technology Preview
An API is available for Identity Management (IdM). To view the API, IdM also provides an API browser as a Technology Preview.
Previously, the IdM API was enhanced to enable multiple versions of API commands. These enhancements could change the behavior of a command in an incompatible way. Users are now able to continue using existing tools and scripts even if the IdM API changes. This enables:
- Administrators to use previous or later versions of IdM on the server than on the managing client.
- Developers can use a specific version of an IdM call, even if the IdM version changes on the server.
In all cases, the communication with the server is possible, regardless if one side uses, for example, a newer version that introduces new options for a feature.
For details on using the API, see Using the Identity Management API to Communicate with the IdM Server (TECHNOLOGY PREVIEW).
ACME available as a Technology Preview
The Automated Certificate Management Environment (ACME) service is now available in Identity Management (IdM) as a Technology Preview. ACME is a protocol for automated identifier validation and certificate issuance. Its goal is to improve security by reducing certificate lifetimes and avoiding manual processes from certificate lifecycle management.
In RHEL, the ACME service uses the Red Hat Certificate System (RHCS) PKI ACME responder. The RHCS ACME subsystem is automatically deployed on every certificate authority (CA) server in the IdM deployment, but it does not service requests until the administrator enables it. RHCS uses the acmeIPAServerCert profile when issuing ACME certificates. The validity period of issued certificates is 90 days. Enabling or disabling the ACME service affects the entire IdM deployment.
It is recommended to enable ACME only in an IdM deployment where all servers are running RHEL 8.4 or later. Earlier RHEL versions do not include the ACME service, which can cause problems in mixed-version deployments. For example, a CA server without ACME can cause client connections to fail, because it uses a different DNS Subject Alternative Name (SAN).
Currently, RHCS does not remove expired certificates. Because ACME certificates expire after 90 days, the expired certificates can accumulate and this can affect performance.
To enable ACME across the whole IdM deployment, use the
ipa-acme-manage enablecommand:# ipa-acme-manage enable The ipa-acme-manage command was successful
To disable ACME across the whole IdM deployment, use the
ipa-acme-manage disablecommand:# ipa-acme-manage disable The ipa-acme-manage command was successful
To check whether the ACME service is installed and if it is enabled or disabled, use the
ipa-acme-manage statuscommand:# ipa-acme-manage status ACME is enabled The ipa-acme-manage command was successful
(BZ#2084181)
6.8. Desktop
GNOME for the 64-bit ARM architecture available as a Technology Preview
The GNOME desktop environment is available for the 64-bit ARM architecture as a Technology Preview.
You can now connect to the desktop session on a 64-bit ARM server using VNC. As a result, you can manage the server using graphical applications.
A limited set of graphical applications is available on 64-bit ARM. For example:
- The Firefox web browser
-
Red Hat Subscription Manager (
subscription-manager-cockpit) -
Firewall Configuration (
firewall-config) -
Disk Usage Analyzer (
baobab)
Using Firefox, you can connect to the Cockpit service on the server.
Certain applications, such as LibreOffice, only provide a command-line interface, and their graphical interface is disabled.
(JIRA:RHELPLAN-27394)
GNOME for the IBM Z architecture available as a Technology Preview
The GNOME desktop environment is available for the IBM Z architecture as a Technology Preview.
You can now connect to the desktop session on an IBM Z server using VNC. As a result, you can manage the server using graphical applications.
A limited set of graphical applications is available on IBM Z. For example:
- The Firefox web browser
-
Red Hat Subscription Manager (
subscription-manager-cockpit) -
Firewall Configuration (
firewall-config) -
Disk Usage Analyzer (
baobab)
Using Firefox, you can connect to the Cockpit service on the server.
Certain applications, such as LibreOffice, only provide a command-line interface, and their graphical interface is disabled.
(JIRA:RHELPLAN-27737)
6.9. The web console
Stratis available as a Technology Preview in the RHEL web console
With this update, the Red Hat Enterprise Linux web console provides the ability to manage Stratis storage as a Technology Preview.
To learn more about Stratis, see What is Stratis.
(JIRA:RHELPLAN-122345)
6.10. Virtualization
Creating nested virtual machines
Nested KVM virtualization is provided as a Technology Preview for KVM virtual machines (VMs) running on Intel, AMD64, and IBM Z hosts with RHEL 9. With this feature, a RHEL 7, RHEL 8, or RHEL 9 VM that runs on a physical RHEL 9 host can act as a hypervisor, and host its own VMs.
(JIRA:RHELDOCS-17040)
AMD SEV and SEV-ES for KVM virtual machines
As a Technology Preview, RHEL 9 provides the Secure Encrypted Virtualization (SEV) feature for AMD EPYC host machines that use the KVM hypervisor. If enabled on a virtual machine (VM), SEV encrypts the VM’s memory to protect the VM from access by the host. This increases the security of the VM.
In addition, the enhanced Encrypted State version of SEV (SEV-ES) is also provided as Technology Preview. SEV-ES encrypts all CPU register contents when a VM stops running. This prevents the host from modifying the VM’s CPU registers or reading any information from them.
Note that SEV and SEV-ES work only on the 2nd generation of AMD EPYC CPUs (codenamed Rome) or later. Also note that RHEL 9 includes SEV and SEV-ES encryption, but not the SEV and SEV-ES security attestation.
(JIRA:RHELPLAN-65217)
Virtualization is now available on ARM 64
As a Technology Preview, it is now possible to create KVM virtual machines on systems using ARM 64 CPUs.
(JIRA:RHELPLAN-103993)
virtio-mem is now available on AMD64 and Intel 64
As a Technology Preview, RHEL 9 introduces the virtio-mem feature on AMD64 and Intel 64 systems. Using virtio-mem makes it possible to dynamically add or remove host memory in virtual machines (VMs).
To use virtio-mem, define virtio-mem memory devices in the XML configuration of a VM and use the virsh update-memory-device command to request memory device size changes while the VM is running. To see the current memory size exposed by such memory devices to a running VM, view the XML configuration of the VM.
Intel vGPU available as a Technology Preview
As a Technology Preview, it is possible to divide a physical Intel GPU device into multiple virtual devices referred to as mediated devices. These mediated devices can then be assigned to multiple virtual machines (VMs) as virtual GPUs. As a result, these VMs share the performance of a single physical Intel GPU.
Note that this feature is deprecated and will be removed entirely in a future RHEL release.
(JIRA:RHELDOCS-17050)
6.11. Containers
The podman-machine command is unsupported
The podman-machine command for managing virtual machines, is available only as a Technology Preview. Instead, run Podman directly from the command line.
(JIRA:RHELDOCS-16861)
