24.5. Non-clustered Managed Domains

Procedure 24.3. Launch a non-clustered JBoss EAP 6 managed domain on a Red Hat AMI

1. In the Security Group tab, ensure all traffic is allowed. Red Hat Enterprise Linux's built-in firewall capabilities can be used to restrict access if desired.
2. Set the public subnet of the VPC to running.
3. Select a static IP.
4. Configure the User Data field. The configurable parameters are available here: Section 24.10.1, “Permanent Configuration Parameters”, Section 24.10.2, “Custom Script Parameters”. For further information on domain controller discovery on Amazon EC2, see Section 24.5.4, “Configuring Domain Controller Discovery and Failover on Amazon EC2”.

   Example 24.4. Example User Data Field

   The example shows the User Data field for a non-clustered JBoss EAP 6 managed domain. The password for the user admin has been set to admin.

   ## password that will be used by slave host controllers to connect to the domain controller
   JBOSSAS_ADMIN_PASSWORD=admin
   
   ## subnet prefix this machine is connected to
   SUBNET=10.0.0.
   
   ## S3 domain controller discovery setup
   # JBOSS_DOMAIN_S3_SECRET_ACCESS_KEY=<your secret key>
   # JBOSS_DOMAIN_S3_ACCESS_KEY=<your access key>
   # JBOSS_DOMAIN_S3_BUCKET=<your bucket name>
   
   #### to run the example no modifications below should be needed ####
   JBOSS_DOMAIN_CONTROLLER=true
   PORTS_ALLOWED="9999 9990 9443"
   JBOSS_IP=`hostname | sed -e 's/ip-//' -e 'y/-/./'` #listen on public/private EC2 IP address
   
   cat > $USER_SCRIPT << "EOF"
   ## Get the application to be deployed from an Internet URL
   # mkdir -p /usr/share/java/jboss-ec2-eap-applications
   # wget https://<your secure storage hostname>/<path>/<app name>.war -O /usr/share/java/jboss-ec2-eap-applications/<app name>.war
   
   ## Create a file of CLI commands to be executed after starting the server
   cat> $USER_CLI_COMMANDS << "EOC" 
   
   # Add the modcluster subsystem to the default profile to set up a proxy
   /profile=default/subsystem=web/connector=ajp:add(name=ajp,protocol=AJP/1.3,scheme=http,socket-binding=ajp)
   /:composite(steps=[ {"operation" => "add", "address" => [ ("profile" => "default"), ("subsystem" => "modcluster") ] },{ "operation" => "add", "address" => [ ("profile" => "default"), ("subsystem" => "modcluster"), ("mod-cluster-config" => "configuration") ], "advertise" => "false", "proxy-list" => "${jboss.modcluster.proxyList}", "connector" => "ajp"}, { "operation" => "add", "address" => [ ("profile" => "default"), ("subsystem" => "modcluster"), ("mod-cluster-config" => "configuration"), ("dynamic-load-provider" => "configuration") ]}, { "operation" => "add", "address" => [ ("profile" => "default"), ("subsystem" => "modcluster"), ("mod-cluster-config" => "configuration"), ("dynamic-load-provider" => "configuration"), ("load-metric" => "busyness")], "type" => "busyness"} ])
   
   # Deploy the sample application from the local filesystem
   deploy /usr/share/java/jboss-ec2-eap-samples/hello.war --server-groups=main-server-group
   EOC
   
   ## this will workaround the problem that in a VPC, instance hostnames are not resolvable
   echo -e "127.0.0.1\tlocalhost.localdomain localhost" > /etc/hosts
   echo -e "::1\tlocalhost6.localdomain6 localhost6" >> /etc/hosts
   for (( i=1 ; i<255 ; i++ )); do
      echo -e "$SUBNET$i\tip-${SUBNET//./-}$i" ;
   done >> /etc/hosts
   
   EOF
   

5. For Production Instances

   For a production instance, add the following line beneath the USER_SCRIPT line of the User Data field, to ensure security updates are applied on boot.

   yum -y update

   Note

   yum -y update should be run regularly, to apply security fixes and enhancements.
6. Launch the Red Hat AMI instance.

Procedure 24.4. Launch Host Controllers

1. Select an AMI.
2. Define the desired number of instances (the number of slave host controllers).
3. Select the VPC and instance type.
4. Click on Security Group.
5. Ensure that all traffic from the JBoss EAP 6 subnet is allowed.
6. Define other restrictions as desired.
7. Add the following into the User Data field:

   ## mod cluster proxy addresses
   MOD_CLUSTER_PROXY_LIST=10.0.0.4:7654
   
   ## host controller setup
   ### static domain controller discovery setup
   JBOSS_DOMAIN_MASTER_ADDRESS=10.0.0.5
   ### S3 domain controller discovery setup
   # JBOSS_DOMAIN_S3_SECRET_ACCESS_KEY=<your secret key>
   # JBOSS_DOMAIN_S3_ACCESS_KEY=<your access key>
   # JBOSS_DOMAIN_S3_BUCKET=<your bucket name>
   
   JBOSS_HOST_PASSWORD=<password for slave host controllers>
   
   ## subnet prefix this machine is connected to
   SUBNET=10.0.1.
   
   #### to run the example no modifications below should be needed ####
   JBOSS_HOST_USERNAME=admin
   PORTS_ALLOWED="1024:65535"
   JBOSS_IP=`hostname | sed -e 's/ip-//' -e 'y/-/./'` #listen on public/private EC2 IP address
   
   cat > $USER_SCRIPT << "EOF"
   ## Server instance configuration
   sed -i "s/other-server-group/main-server-group/" $JBOSS_CONFIG_DIR/$JBOSS_HOST_CONFIG
   
   ## this will workaround the problem that in a VPC, instance hostnames are not resolvable
   echo -e "127.0.0.1\tlocalhost.localdomain localhost" > /etc/hosts
   echo -e "::1\tlocalhost6.localdomain6 localhost6" >> /etc/hosts
   for (( i=1 ; i<255 ; i++ )); do
       echo -e "$SUBNET$i\tip-${SUBNET//./-}$i" ;
   done >> /etc/hosts
   
   EOF

   For further information on domain controller discovery on Amazon EC2, see Section 24.5.4, “Configuring Domain Controller Discovery and Failover on Amazon EC2”.

8. For Production Instances

   For a production instance, add the following line beneath the USER_SCRIPT line of the User Data field, to ensure security updates are applied on boot.

   yum -y update

   Note

   yum -y update should be run regularly, to apply security fixes and enhancements.
9. Launch the Red Hat AMI instance.

Procedure 24.5. Test the Web Server

• Navigate to http://ELASTIC_IP_OF_APACHE_HTTPD in a browser to confirm the web server is running successfully.

Procedure 24.6. Test the Domain Controller

1. Navigate to http://ELASTIC_IP_OF_DOMAIN_CONTROLLER:9990/console
2. Log in using the username of admin and the password specified in the User Data field for the domain controller and the admin console landing page for a managed domain should appear (http://ELASTIC_IP_OF_DOMAIN_CONTROLLER:9990/console/App.html#server-instances).
3. Click the Server label at the top right side of the screen, and select any of the host controllers in the Host dropdown menu at the top left side of the screen.
4. Verify that each host controller has two server configurations called server-one and server-two and that they both belong to the main-server-group.
5. Log out of the JBoss EAP 6 Admin Console.

Procedure 24.7. Test the Host Controllers

1. Navigate to http://ELASTIC_IP_OF_APACHE_HTTPD/hello to test that the sample application is running successfully. The text Hello World! should appear in the browser.
   If the text is not visible, refer here: Section 18.5.1, "About Troubleshooting Amazon EC2".
2. Connect to the Apache HTTP server instance:

   $ ssh -L7654:localhost:7654 ELASTIC_IP_OF_APACHE_HTTPD

3. Navigate to http://localhost:7654/mod_cluster-manager to confirm all instances are running correctly.