Search

Troubleshooting OpenShift Container Storage

download PDF
Red Hat OpenShift Container Storage 4.6

How to troubleshoot errors and issues in OpenShift Container Storage

Red Hat Storage Documentation Team

Abstract

Read this document for instructions on troubleshooting Red Hat OpenShift Container Storage.

Chapter 1. Overview

Troubleshooting OpenShift Container Storage is written to help administrators understand how to troubleshoot and fix their Red Hat OpenShift Container Storage cluster.

Most troubleshooting tasks focus on either a fix or a workaround. This document is divided into chapters based on the errors that an administrator may encounter:

Chapter 2. Downloading log files and diagnostic information using must-gather

If Red Hat OpenShift Container Storage is unable to automatically resolve a problem, use the must-gather tool to collect log files and diagnostic information so that you or Red Hat support can review the problem and determine a solution.

Important

When OpenShift Container Storage is deployed in external mode, must-gather only collects logs from the Red Hat OpenShift Container Storage cluster and does not collect debug data and logs from the external Red Hat Ceph Storage cluster. To collect debug logs from the external Red Hat Ceph Storage cluster, see Red Hat Ceph Storage Troubleshooting guide and contact your Red Hat Ceph Storage Administrator.

Procedure

  • Run the must-gather command from the client connected to the OpenShift Container Storage cluster:

    $ oc adm must-gather --image=registry.redhat.io/ocs4/ocs-must-gather-rhel8:v4.6 --dest-dir=<directory-name>

    This collects the following information in the specified directory:

    • All OpenShift Container Storage cluster related Custom Resources (CRs) with their namespaces.
    • Pod logs of all the OpenShift Container Storage related pods.
    • Output of some standard Ceph commands like Status, Cluster health, and others.

Command variations

  • If one or more master nodes are not in the Ready state, use --node-name to provide a master node that is Ready so that the must-gather pod can be safely scheduled.

    $ oc adm must-gather --image=registry.redhat.io/ocs4/ocs-must-gather-rhel8:v4.6 --dest-dir=<directory-name> --node-name=<node-name>
  • If you want to gather information from a specific time:

    • To specify a relative time period for logs gathered, such as within 5 seconds or 2 days, add /usr/bin/gather since=<duration>:

      $ oc adm must-gather --image=registry.redhat.io/ocs4/ocs-must-gather-rhel8:v4.6 --dest-dir=<directory-name> /usr/bin/gather since=<duration>
    • To specify a specific time to gather logs after, add /usr/bin/gather since-time=<rfc3339-timestamp>:

      $ oc adm must-gather --image=registry.redhat.io/ocs4/ocs-must-gather-rhel8:v4.6 --dest-dir=<directory-name> /usr/bin/gather since-time=<rfc3339-timestamp>

    Replace the example values in these commands as follows:

    <node-name>
    If one or more master nodes are not in the Ready state, use this parameter to provide the name of a master node that is still in the Ready state. This avoids scheduling errors by ensuring that the must-gather pod is not scheduled on a master node that is not ready.
    <directory-name>
    The directory to store information collected by must-gather.
    <duration>
    Specify the period of time to collect information from as a relative duration, for example, 5h (starting from 5 hours ago).
    <rfc3339-timestamp>
    Specify the period of time to collect information from as an RFC 3339 timestamp, for example, 2020-11-10T04:00:00+00:00 (starting from 4am UTC on 11 Nov 2020).

Chapter 3. Commonly required logs for troubleshooting

Some of the commonly used logs for troubleshooting OpenShift Container Storage are listed, along with the commands to generate them.

  • Generating logs for a specific pod:

     $ oc logs <pod-name> -n <namespace>
  • Generating logs for Ceph or OpenShift Container Storage cluster:

    $ oc logs rook-ceph-operator-<ID> -n openshift-storage
  • Generating logs for plugin pods like cephfs or rbd to detect any problem in the PVC mount of the app-pod:

    $ oc logs csi-cephfsplugin-<ID> -n openshift-storage -c csi-cephfsplugin
    $ oc logs csi-rbdplugin-<ID> -n openshift-storage -c csi-rbdplugin
    • To generate logs for all the containers in the CSI pod:

      $ oc logs csi-cephfsplugin-<ID> -n openshift-storage --all-containers
      $ oc logs csi-rbdplugin-<ID> -n openshift-storage --all-containers
  • Generating logs for cephfs or rbd provisioner pods to detect problems if PVC is not in BOUND state:

    $ oc logs csi-cephfsplugin-provisioner-<ID> -n openshift-storage -c csi-cephfsplugin
    $ oc logs csi-rbdplugin-provisioner-<ID> -n openshift-storage -c csi-rbdplugin
    • To generate logs for all the containers in the CSI pod:

      $ oc logs csi-cephfsplugin-provisioner-<ID> -n openshift-storage --all-containers
      $ oc logs csi-rbdplugin-provisioner-<ID> -n openshift-storage --all-containers
  • Generating OpenShift Container Storage logs using cluster-info command:

    $ oc cluster-info dump -n openshift-storage --output-directory=<directory-name>
  • Check the OpenShift Container Storage operator logs and events.

    • To check the operator logs :

      # oc logs <ocs-operator> -n openshift-storage
      <ocs-operator>
      # oc get pods -n openshift-storage | grep -i "ocs-operator" | awk '{print $1}'
    • To check the operator events :

      # oc get events --sort-by=metadata.creationTimestamp -n openshift-storage
  • Get the OpenShift Container Storage operator version and channel.

    # oc get csv -n openshift-storage

    Example output :

    NAME                     DISPLAY VERSION              REPLACES
    PHASE
    ocs-operator.v4.6.2      OpenShift Container Storage  4.6.2
    Succeeded
    # oc get subs -n openshift-storage

    Example output :

    NAME          PACKAGE        SOURCE
    CHANNEL
    ocs-operator  ocs-operator   redhat-operators
    stable-4.6
  • Confirm that the installplan is created.

    # oc get installplan -n openshift-storage
  • Verify the image of the components post updating OpenShift Container Storage.

    • Check the node on which the pod of the component you want to verify the image is running.

      # oc get pods -o wide | grep <component-name>

      For Example :

      # oc get pods -o wide | grep rook-ceph-operator

      Example output:

      rook-ceph-operator-566cc677fd-bjqnb 1/1 Running 20 4h6m 10.128.2.5 rook-ceph-operator-566cc677fd-bjqnb 1/1 Running 20 4h6m 10.128.2.5 dell-r440-12.gsslab.pnq2.redhat.com <none> <none>
      
      <none> <none>

      dell-r440-12.gsslab.pnq2.redhat.com is the node-name.

    • Check the image ID.

      # oc debug node/<node-name>

      <node-name>

      Is the name of the node on which the pod of the component you want to verify the image is running.

      # chroot /host
      # crictl images | grep <component>

      For Example :

      # crictl images | grep rook-ceph

      Example output:

      IMAGE                                                     TAG
            IMAGEID          SIZE
      registry.redhat.io/ocs4/rook-ceph-rhel8-operator@sha256   <none>
            5600a36370df4    1.55GB

      Take a note of the IMAGEID and map it to the Digest ID on the Rook Ceph Operator page.

Additional resources

Chapter 4. Overriding the cluster-wide default node selector for OpenShift Container Storage post deployment

When a cluster-wide default node selector is used for Openshift Container Storage, the pods generated by CSI daemonsets are able to start only on the nodes that match the selector. To be able to use Openshift Container Storage from nodes which do not match the selector, override the cluster-wide default node selector by performing the following steps in the command line interface :

Procedure

  1. Specify a blank node selector for the openshift-storage namespace.

    $ oc annotate namespace openshift-storage openshift.io/node-selector=
  2. Delete the original pods generated by the DaemonSets.

    oc delete pod -l app=csi-cephfsplugin -n openshift-storage
    oc delete pod -l app=csi-rbdplugin -n openshift-storage

Chapter 5. Troubleshooting alerts and errors in OpenShift Container Storage

5.1. Resolving alerts and errors

Red Hat OpenShift Container Storage can detect and automatically resolve a number of common failure scenarios. However, some problems require administrator intervention.

To know the errors currently firing, check one of the following locations:

  • MonitoringAlertingFiring option
  • HomeOverviewOverview tab
  • HomeOverviewPersistent Storage tab
  • HomeOverviewObject Service tab

Copy the error displayed and search it in the following section to know its severity and resolution:

Name: CephMonVersionMismatch

Message: There are multiple versions of storage services running.

Description: There are {{ $value }} different versions of Ceph Mon components running.

Severity: Warning

Resolution: Fix

Procedure: Inspect the user interface and log, and verify if an update is in progress.

  • If an update in progress, this alert is temporary.
  • If an update is not in progress, restart the upgrade process.

Name: CephOSDVersionMismatch

Message: There are multiple versions of storage services running.

Description: There are {{ $value }} different versions of Ceph OSD components running.

Severity: Warning

Resolution: Fix

Procedure: Inspect the user interface and log, and verify if an update is in progress.

  • If an update in progress, this alert is temporary.
  • If an update is not in progress, restart the upgrade process.

Name: CephClusterCriticallyFull

Message: Storage cluster is critically full and needs immediate expansion

Description: Storage cluster utilization has crossed 85%.

Severity: Crtical

Resolution: Fix

Procedure: Remove unnecessary data or expand the cluster.

Name: CephClusterNearFull

Fixed: Storage cluster is nearing full. Expansion is required.

Description: Storage cluster utilization has crossed 75%.

Severity: Warning

Resolution: Fix

Procedure: Remove unnecessary data or expand the cluster.

Name: NooBaaBucketErrorState

Message: A NooBaa Bucket Is In Error State

Description: A NooBaa bucket {{ $labels.bucket_name }} is in error state for more than 6m

Severity: Warning

Resolution: Workaround

Procedure: Resolving NooBaa Bucket Error State

Name: NooBaaBucketExceedingQuotaState

Message: A NooBaa Bucket Is In Exceeding Quota State

Description: A NooBaa bucket {{ $labels.bucket_name }} is exceeding its quota - {{ printf "%0.0f" $value }}% used message: A NooBaa Bucket Is In Exceeding Quota State

Severity: Warning

Resolution: Fix

Procedure: Resolving NooBaa Bucket Exceeding Quota State

Name: NooBaaBucketLowCapacityState

Message: A NooBaa Bucket Is In Low Capacity State

Description: A NooBaa bucket {{ $labels.bucket_name }} is using {{ printf "%0.0f" $value }}% of its capacity

Severity: Warning

Resolution: Fix

Procedure: Resolving NooBaa Bucket Capacity or Quota State

Name: NooBaaBucketNoCapacityState

Message: A NooBaa Bucket Is In No Capacity State

Description: A NooBaa bucket {{ $labels.bucket_name }} is using all of its capacity

Severity: Warning

Resolution: Fix

Procedure: Resolving NooBaa Bucket Capacity or Quota State

Name: NooBaaBucketReachingQuotaState

Message: A NooBaa Bucket Is In Reaching Quota State

Description: A NooBaa bucket {{ $labels.bucket_name }} is using {{ printf "%0.0f" $value }}% of its quota

Severity: Warning

Resolution: Fix

Procedure: Resolving NooBaa Bucket Capacity or Quota State

Name: NooBaaResourceErrorState

Message: A NooBaa Resource Is In Error State

Description: A NooBaa resource {{ $labels.resource_name }} is in error state for more than 6m

Severity: Warning

Resolution: Workaround

Procedure: Resolving NooBaa Bucket Error State

Name: NooBaaSystemCapacityWarning100

Message: A NooBaa System Approached Its Capacity

Description: A NooBaa system approached its capacity, usage is at 100%

Severity: Warning

Resolution: Fix

Procedure: Resolving NooBaa Bucket Capacity or Quota State

Name: NooBaaSystemCapacityWarning85

Message: A NooBaa System Is Approaching Its Capacity

Description: A NooBaa system is approaching its capacity, usage is more than 85%

Severity: Warning

Resolution: Fix

Procedure: Resolving NooBaa Bucket Capacity or Quota State

Name: NooBaaSystemCapacityWarning95

Message: A NooBaa System Is Approaching Its Capacity

Description: A NooBaa system is approaching its capacity, usage is more than 95%

Severity: Warning

Resolution: Fix

Procedure: Resolving NooBaa Bucket Capacity or Quota State

Name: CephMdsMissingReplicas

Message: Insufficient replicas for storage metadata service.

Description: `Minimum required replicas for storage metadata service not available.

Might affect the working of storage cluster.`

Severity: Warning

Resolution: Contact Red Hat support

Procedure:

  1. Check for alerts and operator status.
  2. If the issue cannot be identified, contact Red Hat support.

Name: CephMgrIsAbsent

Message: Storage metrics collector service not available anymore.

Description: Ceph Manager has disappeared from Prometheus target discovery.

Severity: Critical

Resolution: Contact Red Hat support

Procedure:

  1. Inspect the user interface and log, and verify if an update is in progress.

    • If an update in progress, this alert is temporary.
    • If an update is not in progress, restart the upgrade process.
  2. Once the upgrade is complete, check for alerts and operator status.
  3. If the issue persistents or cannot be identified, contact Red Hat support.

Name: CephNodeDown

Message: Storage node {{ $labels.node }} went down

Description: Storage node {{ $labels.node }} went down. Please check the node immediately.

Severity: Critical

Resolution: Contact Red Hat support

Procedure:

  1. Check which node stopped functioning and its cause.
  2. Take appropriate actions to recover the node. If node cannot be recovered:

Name: CephClusterErrorState

Message: Storage cluster is in error state

Description: Storage cluster is in error state for more than 10m.

Severity: Critical

Resolution: Contact Red Hat support

Procedure:

  1. Check for alerts and operator status.
  2. If the issue cannot be identified, download log files and diagnostic information using must-gather.
  3. Open a Support Ticket with Red Hat Support with an attachment of the output of must-gather.

Name: CephClusterWarningState

Message: Storage cluster is in degraded state

Description: Storage cluster is in warning state for more than 10m.

Severity: Warning

Resolution: Contact Red Hat support

Procedure:

  1. Check for alerts and operator status.
  2. If the issue cannot be identified, download log files and diagnostic information using must-gather.
  3. Open a Support Ticket with Red Hat Support with an attachment of the output of must-gather.

Name: CephDataRecoveryTakingTooLong

Message: Data recovery is slow

Description: Data recovery has been active for too long.

Severity: Warning

Resolution: Contact Red Hat support

Name: CephOSDDiskNotResponding

Message: Disk not responding

Description: Disk device {{ $labels.device }} not responding, on host {{ $labels.host }}.

Severity: Critical

Resolution: Contact Red Hat support

Name: CephOSDDiskUnavailable

Message: Disk not accessible

Description: Disk device {{ $labels.device }} not accessible on host {{ $labels.host }}.

Severity: Critical

Resolution: Contact Red Hat support

Name: CephPGRepairTakingTooLong

Message: Self heal problems detected

Description: Self heal operations taking too long.

Severity: Warning

Resolution: Contact Red Hat support

Name: CephMonHighNumberOfLeaderChanges

Message: Storage Cluster has seen many leader changes recently.

Description: 'Ceph Monitor "{{ $labels.job }}": instance {{ $labels.instance }} has seen {{ $value printf "%.2f" }} leader changes per minute recently.'

Severity: Warning

Resolution: Contact Red Hat support

Name: CephMonQuorumAtRisk

Message: Storage quorum at risk

Description: Storage cluster quorum is low.

Severity: Critical

Resolution: Contact Red Hat support

Name: ClusterObjectStoreState

Message: Cluster Object Store is in unhealthy state. Please check Ceph cluster health.

Description: Cluster Object Store is in unhealthy state for more than 15s. Please check Ceph cluster health.

Severity: Critical

Resolution: Contact Red Hat support

Procedure:

5.2. Resolving NooBaa Bucket Error State

Procedure

  1. Log in to OpenShift Web Console and click Object Service.
  2. In the Details card, click the link under System Name field.
  3. In the left pane, click Buckets option and search for the bucket in error state.
  4. Click on it’s Bucket Name. Error encountered in bucket is displayed.
  5. Depending on the specific error of the bucket, perform one or both of the following:

    1. For space related errors:

      1. In the left pane, click Resources option.
      2. Click on the resource in error state.
      3. Scale the resource by adding more agents.
    2. For resource health errors:

      1. In the left pane, click Resources option.
      2. Click on the resource in error state.
      3. Connectivity error means the backing service is not available and needs to be restored.
      4. For access/permissions errors, update the connection’s Access Key and Secret Key.

5.3. Resolving NooBaa Bucket Exceeding Quota State

To resolve A NooBaa Bucket Is In Exceeding Quota State error perform one of the following:

  • Cleanup some of the data on the bucket.
  • Increase the bucket quota by performing the following steps:

    1. Log in to OpenShift Web Console and click Object Service.
    2. In the Details card, click the link under System Name field.
    3. In the left pane, click Buckets option and search for the bucket in error state.
    4. Click on it’s Bucket Name. Error encountered in bucket is displayed.
    5. Click Bucket PoliciesEdit Quota and increase the quota.

5.4. Resolving NooBaa Bucket Capacity or Quota State

Procedure

  1. Log in to OpenShift Web Console and click Object Service.
  2. In the Details card, click the link under System Name field.
  3. In the left pane, click Resources option and search for the PV pool resource.
  4. For the PV pool resource with low capacity status, click on it’s Resource Name.
  5. Edit the pool configuration and increase the number of agents.

5.5. Recovering pods

When a first node (say NODE1) goes to NotReady state because of some issue, the hosted pods that are using PVC with ReadWriteOnce (RWO) access mode try to move to the second node (say NODE2) but get stuck due to multi-attach error. In such a case, you can recover MON, OSD, and application pods by using the following steps.

Procedure

  1. Power off NODE1 (from AWS or vSphere side) and ensure that NODE1 is completely down.
  2. Force delete the pods on NODE1 by using the following command:

    $ oc delete pod <pod-name> --grace-period=0 --force

5.6. Recovering from EBS volume detach

When an OSD or MON elastic block storage (EBS) volume where the OSD disk resides is detached from the worker Amazon EC2 instance, the volume gets reattached automatically within one or two minutes. However, the OSD pod gets into a CrashLoopBackOff state. To recover and bring back the pod to Running state, you must restart the EC2 instance.

Chapter 6. Checking for Local Storage Operator deployments

OpenShift Container Storage clusters with Local Storage Operator are deployed using local storage devices. To find out if your existing cluster with OpenShift Container Storage was deployed using local storage devices, use the following procedure:

Prerequisites

  • OpenShift Container Storage is installed and running in the openshift-storage namespace.

Procedure

By checking the storage class associated with your OpenShift Container Storage cluster’s persistent volume claims (PVCs), you can tell if your cluster was deployed using local storage devices.

  1. Check the storage class associated with OpenShift Container Storage cluster’s PVCs with the following command:

    $ oc get pvc -n openshift-storage
  2. Check the output. For clusters with Local Storage Operator, the PVCs associated with ocs-deviceset use the storage class localblock. The output looks similar to the following:

    NAME                      STATUS   VOLUME                                     CAPACITY   ACCESS MODES   STORAGECLASS                  AGE
    db-noobaa-db-0            Bound    pvc-d96c747b-2ab5-47e2-b07e-1079623748d8   50Gi       RWO            ocs-storagecluster-ceph-rbd   114s
    ocs-deviceset-0-0-lzfrd   Bound    local-pv-7e70c77c                          1769Gi     RWO            localblock                    2m10s
    ocs-deviceset-1-0-7rggl   Bound    local-pv-b19b3d48                          1769Gi     RWO            localblock                    2m10s
    ocs-deviceset-2-0-znhk8   Bound    local-pv-e9f22cdc                          1769Gi     RWO            localblock                    2m10s

Chapter 7. Troubleshooting and deleting remaining resources during Uninstall

Occasionally some of the custom resources managed by an operator may remain in "Terminating" status waiting on the finalizer to complete, although you have performed all the required cleanup tasks. In such an event you need to force the removal of such resources. If you do not do so, the resources remain in the "Terminating" state even after you have performed all the uninstall steps.

  1. Check if the openshift-storage namespace is stuck in Terminating state upon deletion.

    $ oc get project openshift-storage

    Output:

    NAME                DISPLAY NAME   STATUS
    openshift-storage                  Terminating
  2. Check for the NamespaceFinalizersRemaining and NamespaceContentRemaining messages in the STATUS section of the command output and perform the next step for each of the listed resources.

    $ oc get project openshift-storage -o yaml

    Example output :

    status:
      conditions:
      - lastTransitionTime: "2020-07-26T12:32:56Z"
        message: All resources successfully discovered
        reason: ResourcesDiscovered
        status: "False"
        type: NamespaceDeletionDiscoveryFailure
      - lastTransitionTime: "2020-07-26T12:32:56Z"
        message: All legacy kube types successfully parsed
        reason: ParsedGroupVersions
        status: "False"
        type: NamespaceDeletionGroupVersionParsingFailure
      - lastTransitionTime: "2020-07-26T12:32:56Z"
        message: All content successfully deleted, may be waiting on finalization
        reason: ContentDeleted
        status: "False"
        type: NamespaceDeletionContentFailure
      - lastTransitionTime: "2020-07-26T12:32:56Z"
        message: 'Some resources are remaining: cephobjectstoreusers.ceph.rook.io has
          1 resource instances'
        reason: SomeResourcesRemain
        status: "True"
        type: NamespaceContentRemaining
      - lastTransitionTime: "2020-07-26T12:32:56Z"
        message: 'Some content in the namespace has finalizers remaining: cephobjectstoreuser.ceph.rook.io
          in 1 resource instances'
        reason: SomeFinalizersRemain
        status: "True"
        type: NamespaceFinalizersRemaining
  3. Delete all the remaining resources listed in the previous step.

    For each of the resources to be deleted, do the following:

    1. Get the object kind of the resource which needs to be removed. See the message in the above output.

      Example :

      message: Some content in the namespace has finalizers remaining: cephobjectstoreuser.ceph.rook.io

      Here cephobjectstoreuser.ceph.rook.io is the object kind.

    2. Get the Object name corresponding to the object kind.

      $ oc get  <Object-kind> -n  <project-name>

      Example :

      $ oc get cephobjectstoreusers.ceph.rook.io -n openshift-storage

      Example output:

      NAME                           AGE
      noobaa-ceph-objectstore-user   26h
    3. Patch the resources.

      $ oc patch -n <project-name> <object-kind>/<object-name> --type=merge -p '{"metadata": {"finalizers":null}}'

      Example:

      $ oc patch -n openshift-storage cephobjectstoreusers.ceph.rook.io/noobaa-ceph-objectstore-user \
      --type=merge -p '{"metadata": {"finalizers":null}}'

      Output:

      cephobjectstoreuser.ceph.rook.io/noobaa-ceph-objectstore-user patched
  4. Verify that the openshift-storage project is deleted.

    $ oc get project  openshift-storage

    Output:

    Error from server (NotFound): namespaces "openshift-storage" not found

    If the issue persists, reach out to Red Hat Support.

Chapter 8. Troubleshooting CephFS PVC creation in external mode

If you have updated the Red Hat Ceph Storage cluster from a version lower than 4.1.1 to the latest release and is not a freshly deployed cluster, you must manually set the application type for CephFS pool on the Red Hat Ceph Storage cluster to enable CephFS PVC creation in external mode.

  1. Check for CephFS pvc stuck in Pending status.

    $ oc get pvc

    Example output :

    NAME                      STATUS    VOLUME
    CAPACITY  ACCESS MODES    STORAGECLASS                        AGE
    ngx-fs-pxknkcix20-pod     Pending
                              ocs-external-storagecluster-cephfs  28h
    [...]
  2. Check the describe output to see the events for respective pvc.

    Expected error message is cephfs_metadata/csi.volumes.default/csi.volume.pvc-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx: (1) Operation not permitted)

    # oc describe pvc ngx-fs-pxknkcix20-pod -n nginx-file

    Example output:

    Name:          ngx-fs-pxknkcix20-pod
    Namespace:     nginx-file
    StorageClass:  ocs-external-storagecluster-cephfs
    Status:        Pending
    Volume:
    Labels:        <none>
    Annotations:   volume.beta.kubernetes.io/storage-provisioner: openshift-storage.cephfs.csi.ceph.com
    Finalizers:    [kubernetes.io/pvc-protection]
    Capacity:
    Access Modes:
    VolumeMode:    Filesystem
    Mounted By:    ngx-fs-oyoe047v2bn2ka42jfgg-pod-hqhzf
    Events:
     Type     Reason              Age                   From                                                                                                                      Message
     ----     ------              ----                  ----                                                                                                                      -------
     Warning  ProvisioningFailed  107m (x245 over 22h)  openshift-storage.cephfs.csi.ceph.com_csi-cephfsplugin-provisioner-5f8b66cc96-hvcqp_6b7044af-c904-4795-9ce5-bf0cf63cc4a4
     (combined from similar events): failed to provision volume with StorageClass "ocs-external-storagecluster-cephfs": rpc error: code = Internal desc = error (an error (exit status 1) occurred while
     running rados args: [-m 192.168.13.212:6789,192.168.13.211:6789,192.168.13.213:6789 --id csi-cephfs-provisioner --keyfile=stripped -c /etc/ceph/ceph.conf -p cephfs_metadata getomapval
     csi.volumes.default csi.volume.pvc-1ac0c6e6-9428-445d-bbd6-1284d54ddb47 /tmp/omap-get-186436239 --namespace=csi]) occurred, command output streams is ( error getting omap value
     cephfs_metadata/csi.volumes.default/csi.volume.pvc-1ac0c6e6-9428-445d-bbd6-1284d54ddb47: (1) Operation not permitted)
  3. Check the settings for the <cephfs metadata pool name> (here cephfs_metadata ) and <cephfs data pool name> (here cephfs_data). For running the command, you will need jq preinstalled in the Red Hat Ceph Storage client node.

    # ceph osd pool ls detail --format=json | jq '.[] | select(.pool_name| startswith("cephfs")) | .pool_name, .application_metadata' "cephfs_data"
    {
      "cephfs": {}
    }
    "cephfs_metadata"
    {
       "cephfs": {}
    }
  4. Set the application type for CephFS pool.

    • Run the following commands on the Red Hat Ceph Storage client node :

      # ceph osd pool application set <cephfs metadata pool name> cephfs metadata cephfs
      # ceph osd pool application set <cephfs data pool name> cephfs data cephfs
  5. Verify if the settings are applied.

     # ceph osd pool ls detail --format=json | jq '.[] | select(.pool_name| startswith("cephfs")) | .pool_name, .application_metadata' "cephfs_data"
      {
        "cephfs": {
          "data": "cephfs"
       }
      }
      "cephfs_metadata"
      {
        "cephfs": {
          "metadata": "cephfs"
        }
      }
  6. Check the CephFS PVC status again. The PVC should now be in Bound state.

      # oc get pvc

    Example output :

    NAME                      STATUS    VOLUME
    CAPACITY  ACCESS MODES    STORAGECLASS                        AGE
    ngx-fs-pxknkcix20-pod     Bound     pvc-1ac0c6e6-9428-445d-bbd6-1284d54ddb47
    1Mi       RWO             ocs-external-storagecluster-cephfs  29h
    [...]

Chapter 9. Restoring the monitor pods in OpenShift Container Storage

Restore the monitor pods if all three of them go down, and when OpenShift Container Storage is not able to recover the monitor pods automatically.

Procedure

  1. Scale down the rook-ceph-operator and ocs operator deployments.

    # oc scale deployment rook-ceph-operator --replicas=0 -n openshift-storage
    # oc scale deployment ocs-operator --replicas=0 -n openshift-storage
  2. Create a backup of all deployments in the openshift-storage namespace.

    # mkdir backup
    # cd backup
    # oc project openshift-storage
    # for d in $(oc get deployment|awk -F' ' '{print $1}'|grep -v NAME); do echo $d;oc get deployment $d -o yaml > oc_get_deployment.${d}.yaml; done
  3. Patch the OSD deployments to remove the livenessProbe parameter, and run it with the command parameter as sleep.

    # for i in $(oc get deployment -l app=rook-ceph-osd -oname);do oc patch ${i} -n openshift-storage --type='json' -p '[{"op":"remove", "path":"/spec/template/spec/containers/0/livenessProbe"}]' ; oc patch ${i} -n openshift-storage -p '{"spec": {"template": {"spec": {"containers": [{"name": "osd", "command": ["sleep", "infinity"], "args": []}]}}}}' ; done
  4. Retrieve the monstore cluster map from all the OSDs.

    1. Create the recover_mon.sh script.

      #!/bin/bash
      ms=/tmp/monstore
      
      rm -rf $ms
      mkdir $ms
      
      for osd_pod in $(oc get po -l app=rook-ceph-osd -oname -n openshift-storage); do
      
        echo "Starting with pod: $osd_pod"
      
        podname=$(echo $osd_pod|sed 's/pod\///g')
        oc exec $osd_pod -- rm -rf $ms
        oc cp $ms $podname:$ms
      
        rm -rf $ms
        mkdir $ms
      
        echo "pod in loop: $osd_pod ; done deleting local dirs"
      
        oc exec $osd_pod -- ceph-objectstore-tool --type bluestore --data-path /var/lib/ceph/osd/ceph-$(oc get $osd_pod -ojsonpath='{ .metadata.labels.ceph_daemon_id }') --op update-mon-db --no-mon-config --mon-store-path $ms
        echo "Done with COT on pod: $osd_pod"
      
        oc cp $podname:$ms $ms
      
        echo "Finished pulling COT data from pod: $osd_pod"
      done
    2. Run the recover_mon.sh script.

      # chmod +x recover_mon.sh
      # ./recover_mon.sh
  5. Patch the MON deployments, and run it with the command parameter as sleep.

    1. Edit the MON deployments.

      # for i in $(oc get deployment -l app=rook-ceph-mon -oname);do oc patch ${i} -n openshift-storage -p '{"spec": {"template": {"spec": {"containers": [{"name": "mon", "command": ["sleep", "infinity"], "args": []}]}}}}'; done
    2. Patch the MON deployments to increase the initialDelaySeconds.

      # oc get deployment rook-ceph-mon-a -o yaml | sed "s/initialDelaySeconds: 10/initialDelaySeconds: 2000/g" | oc replace -f -
      # oc get deployment rook-ceph-mon-b -o yaml | sed "s/initialDelaySeconds: 10/initialDelaySeconds: 2000/g" | oc replace -f -
      # oc get deployment rook-ceph-mon-c -o yaml | sed "s/initialDelaySeconds: 10/initialDelaySeconds: 2000/g" | oc replace -f -
  6. Copy the previously retrieved monstore to the mon-a pod.

    # oc cp /tmp/monstore/ $(oc get po -l app=rook-ceph-mon,mon=a -oname |sed 's/pod\///g'):/tmp/
  7. Navigate into the MON pod and change the ownership of the retrieved monstore.

    # oc rsh $(oc get po -l app=rook-ceph-mon,mon=a -oname)
    # chown -R ceph:ceph /tmp/monstore
  8. Set the appropriate capabilities before rebuilding the MON DB.

    # oc rsh $(oc get po -l app=rook-ceph-mon,mon=a -oname)
    # cp /etc/ceph/keyring-store/keyring /tmp/keyring
    # cat /tmp/keyring
      [mon.]
        key = AQCleqldWqm5IhAAgZQbEzoShkZV42RiQVffnA==
        caps mon = "allow *"
      [client.admin]
        key = AQCmAKld8J05KxAArOWeRAw63gAwwZO5o75ZNQ==
        auid = 0
        caps mds = "allow *"
        caps mgr = "allow *"
        caps mon = "allow *"
        caps osd = "allow *”
  9. Identify the keyring of all the other Ceph daemons (MGR, MDS, RGW, Crash, CSI and CSI provisioners) from its respective secrets.

    # oc get secret rook-ceph-mds-ocs-storagecluster-cephfilesystem-a-keyring -ojson  | jq .data.keyring | xargs echo | base64 -d
    
    [mds.ocs-storagecluster-cephfilesystem-a]
    key = AQB3r8VgAtr6OhAAVhhXpNKqRTuEVdRoxG4uRA==
    caps mon = "allow profile mds"
    caps osd = "allow *"
    caps mds = "allow"

    Example keyring file, /etc/ceph/ceph.client.admin.keyring:

    [mon.]
    	key = AQDxTF1hNgLTNxAAi51cCojs01b4I5E6v2H8Uw==
    	caps mon = "allow " [mds.ocs-storagecluster-cephfilesystem-a] key = AQCKTV1horgjARAA8aF/BDh/4+eG4RCNBCl+aw== caps mds = "allow" caps mon = "allow profile mds" caps osd = "allow *" [mds.ocs-storagecluster-cephfilesystem-b] key = AQCKTV1hN4gKLBAA5emIVq3ncV7AMEM1c1RmGA== caps mds = "allow" caps mon = "allow profile mds" caps osd = "allow *" [client.admin] key = AQDxTF1hpzguOxAA0sS8nN4udoO35OEbt3bqMQ== caps mds = "allow *" caps mgr = "allow *" caps mon = "allow *" caps osd = "allow *" [client.crash] key = AQBOTV1htO1aGRAAe2MPYcGdiAT+Oo4CNPSF1g== caps mgr = "allow rw" caps mon = "allow profile crash" [client.csi-cephfs-node] key = AQBOTV1hiAtuBBAAaPPBVgh1AqZJlDeHWdoFLw== caps mds = "allow rw" caps mgr = "allow rw" caps mon = "allow r" caps osd = "allow rw tag cephfs *="
    [client.csi-cephfs-provisioner]
    	key = AQBNTV1hHu6wMBAAzNXZv36aZJuE1iz7S7GfeQ==
    	caps mgr = "allow rw"
    	caps mon = "allow r"
    	caps osd = "allow rw tag cephfs metadata=*"
    [client.csi-rbd-node]
    	key = AQBNTV1h+LnkIRAAWnpIN9bUAmSHOvJ0EJXHRw==
    	caps mgr = "allow rw"
    	caps mon = "profile rbd"
    	caps osd = "profile rbd"
    [client.csi-rbd-provisioner]
    	key = AQBNTV1hMNcsExAAvA3gHB2qaY33LOdWCvHG/A==
    	caps mgr = "allow rw"
    	caps mon = "profile rbd"
    	caps osd = "profile rbd"
    [mgr.a]
    	key = AQBOTV1hGYOEORAA87471+eIZLZtptfkcHvTRg==
    	caps mds = "allow *"
    	caps mon = "allow profile mgr"
    	caps osd = "allow *"
    Important
    • For client.csi related keyring, add the default caps after fetching the key from its respective OpenShift Container Storage secret.
    • OSD keyring is added automatically post recovery.
  10. Navigate into the mon-a pod.

    Verify that the monstore has monmap.

    # ceph-monstore-tool /tmp/monstore get monmap -- --out /tmp/monmap
    # monmaptool /tmp/monmap --print

    If the monmap is missing then create a new monmap.

    # monmaptool --create --add <mon-a-id> <mon-a-ip> --add <mon-b-id> <mon-b-ip> --add <mon-c-id> <mon-c-ip> --enable-all-features --clobber /root/monmap --fsid <fsid>
    <mon-a-id>
    Is the ID of the mon-a pod
    <mon-a-ip>
    Is the IP address of the mon-a pod
    <mon-b-id>
    Is the ID of the mon-b pod
    <mon-b-ip>
    Is the IP address of the mon-b pod
    <mon-c-id>
    Is the ID of the mon-c pod
    <mon-c-ip>
    Is the IP address of the mon-c pod
    <fsid>
    Is the file system ID
  11. Verify the monmap.

    # monmaptool /root/monmap --print
  12. Import the monmap.

    Important

    Use the previously created keyring file.

    # ceph-monstore-tool /tmp/monstore rebuild -- --keyring /tmp/keyring --monmap /root/monmap
    # chown -R ceph:ceph /tmp/monstore
  13. Create a backup of the old store.db file.

    # mv /var/lib/ceph/mon/ceph-a/store.db /var/lib/ceph/mon/ceph-a/store.db.corrupted
    # mv /var/lib/ceph/mon/ceph-b/store.db /var/lib/ceph/mon/ceph-b/store.db.corrupted
    # mv /var/lib/ceph/mon/ceph-c/store.db /var/lib/ceph/mon/ceph-c/store.db.corrupted
  14. Copy the rebuild store.db file to the monstore directory.

    # mv /tmp/monstore/store.db /var/lib/ceph/mon/ceph-a/store.db
    # chown -R ceph:ceph /var/lib/ceph/mon/ceph-a/store.db
  15. After rebuilding the monstore directory, copy the store.db file from local to the rest of the MON pods.

    # oc cp $(oc get po -l app=rook-ceph-mon,mon=a -oname | sed 's/pod\///g'):/var/lib/ceph/mon/ceph-a/store.db /tmp/store.db
    # oc cp /tmp/store.db $(oc get po -l app=rook-ceph-mon,mon=<id> -oname | sed 's/pod\///g'):/var/lib/ceph/mon/ceph-<id>
    <id>
    Is the ID of the MON pod
  16. Navigate into the rest of the MON pods and change the ownership of the copied monstore.

    # oc rsh $(oc get po -l app=rook-ceph-mon,mon=<id> -oname)
    # chown -R ceph:ceph /var/lib/ceph/mon/ceph-<id>/store.db
    <id>
    Is the ID of the MON pod
  17. Revert the patched changes.

    • For MON deployments:

      # oc replace --force -f <mon-deployment.yaml>
      <mon-deployment.yaml>
      Is the MON deployment yaml file
    • For OSD deployments:

      # oc replace --force -f <osd-deployment.yaml>
      <osd-deployment.yaml>
      Is the OSD deployment yaml file
    • For MGR deployments:

      # oc replace --force -f <mgr-deployment.yaml>
      <mgr-deployment.yaml>

      Is the MGR deployment yaml file

      Important

      Ensure that the MON, MGR and OSD pods are up and running.

  18. Scale up the rook-ceph-operator and ocs-operator deployments.

    # oc -n openshift-storage scale deployment rook-ceph-operator --replicas=1
    # oc -n openshift-storage scale deployment ocs-operator --replicas=1

Restoring the CephFS

Check the Ceph status to confirm that CephFS is running.

# ceph -s

Example output:

cluster:
   id:     f111402f-84d1-4e06-9fdb-c27607676e55
   health: HEALTH_ERR
            1 filesystem is offline
            1 filesystem is online with fewer MDS than max_mds
            3 daemons have recently crashed

   services:
     mon: 3 daemons, quorum b,c,a (age 15m)
     mgr: a(active, since 14m)
     mds: ocs-storagecluster-cephfilesystem:0
     osd: 3 osds: 3 up (since 15m), 3 in (since 2h)

   data:
     pools:   3 pools, 96 pgs
     objects: 500 objects, 1.1 GiB
     usage:   5.5 GiB used, 295 GiB / 300 GiB avail
     pgs:     96 active+clean

If the filesystem is offline or MDS service is missing, perform the following steps:

  1. Scale down the rook-ceph-operator and ocs operator deployments.

    # oc scale deployment rook-ceph-operator --replicas=0 -n openshift-storage
    # oc scale deployment ocs-operator --replicas=0 -n openshift-storage
  2. Patch the MDS deployments to remove the livenessProbe parameter and run it with the command parameter as sleep.

    # for i in $(oc get deployment -l app=rook-ceph-mds -oname);do oc patch ${i} -n openshift-storage --type='json' -p '[{"op":"remove", "path":"/spec/template/spec/containers/0/livenessProbe"}]' ; oc patch ${i} -n openshift-storage -p '{"spec": {"template": {"spec": {"containers": [{"name": "mds", "command": ["sleep", "infinity"], "args": []}]}}}}' ; done
  3. Recover the CephFS.

    # ceph fs reset ocs-storagecluster-cephfilesystem --yes-i-really-mean-it

    If the reset command fails, force create the default filesystem with the data and metadata pools, and then reset it.

    Note

    The reset command might fail if the cephfilesystem is missing.

    # ceph fs new ocs-storagecluster-cephfilesystem ocs-storagecluster-cephfilesystem-metadata ocs-storagecluster-cephfilesystem-data0 --force
    # ceph fs reset ocs-storagecluster-cephfilesystem --yes-i-really-mean-it
  4. Replace the MDS deployments.

    # oc replace --force -f oc_get_deployment.rook-ceph-mds-ocs-storagecluster-cephfilesystem-a.yaml
    # oc replace --force -f oc_get_deployment.rook-ceph-mds-ocs-storagecluster-cephfilesystem-b.yaml
  5. Scale up the rook-ceph-operator and ocs-operator deployments.

    # oc scale deployment rook-ceph-operator --replicas=1 -n openshift-storage
    # oc scale deployment ocs-operator --replicas=1 -n openshift-storage
  6. Check the CephFS status.

    # ceph fs status

    The status should be active.

Important

If the application pods attached to the deployments which were using the CephFS Persistent Volume Claims (PVCs) get stuck in CreateContainerError state post restoring the CephFS, restart the application pods.

# oc -n <namespace> delete pods <cephfs-app-pod>
<namespace>
Is the project namespace
<cephfs-app-pod>
Is the name of the CephFS application pod

Restoring the Multicloud Object Gateway

Post restoring the MON pods, check the Multicloud Object Gateway (MCG) status, it should be active, and the backingstore and bucketclass should be in Ready state. If not, restart all the MCG related pods and check the MCG status to confirm that the MCG is back up and running.

  1. Check the MCG status.

    noobaa status -n openshift-storage
  2. Restart all the pods related to the MCG.

    # oc delete pods <noobaa-operator> -n openshift-storage
    # oc delete pods <noobaa-core> -n openshift-storage
    # oc delete pods <noobaa-endpoint> -n openshift-storage
    # oc delete pods <noobaa-db> -n openshift-storage
    <noobaa-operator>
    Is the name of the MCG operator
    <noobaa-core>
    Is the name of the MCG core pod
    <noobaa-endpoint>
    Is the name of the MCG endpoint
    <noobaa-db>
    Is the name of the MCG db pod
  3. If the RADOS Object Gateway (RGW) is configured, restart the pod.

    # oc delete pods <rgw-pod> -n openshift-storage
    <rgw-pod>
    Is the name of the RGW pod
Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.