Deploying OpenShift Data Foundation using Microsoft Azure and Azure Red Hat OpenShift
Instructions on deploying OpenShift Data Foundation using Microsoft Azure and Azure Red Hat OpenShift
Abstract
Making open source more inclusive
Red Hat is committed to replacing problematic language in our code, documentation, and web properties. We are beginning with these four terms: master, slave, blacklist, and whitelist. Because of the enormity of this endeavor, these changes will be implemented gradually over several upcoming releases. For more details, see our CTO Chris Wright’s message.
Providing feedback on Red Hat documentation
We appreciate your input on our documentation. Do let us know how we can make it better.
To give feedback, create a Bugzilla ticket:
- Go to the Bugzilla website.
- In the Component section, choose documentation.
- Fill in the Description field with your suggestion for improvement. Include a link to the relevant part(s) of documentation.
- Click Submit Bug.
Preface
Red Hat OpenShift Data Foundation supports deployment on existing Red Hat OpenShift Container Platform (RHOCP) Azure clusters.
Only internal OpenShift Data Foundation clusters are supported on Microsoft Azure. See Planning your deployment for more information about deployment requirements.
To deploy OpenShift Data Foundation, start with the requirements in Preparing to deploy OpenShift Data Foundation chapter and then follow the appropriate deployment process based on your requirement:
Chapter 1. Preparing to deploy OpenShift Data Foundation
Deploying OpenShift Data Foundation on OpenShift Container Platform using dynamic storage devices provides you with the option to create internal cluster resources. This will result in the internal provisioning of the base services, which helps to make additional storage classes available to applications.
Before you begin the deployment of OpenShift Data Foundation, follow these steps:
- Setup a chrony server. See Configuring chrony time service and use knowledgebase solution to create rules allowing all traffic.
Optional: If you want to enable cluster-wide encryption using an external Key Management System (KMS) then follow the steps:
- Ensure that you have a valid Red Hat OpenShift Data Foundation Advanced subscription. To know how subscriptions for OpenShift Data Foundation work, see knowledgebase article on OpenShift Data Foundation subscriptions.
- When the Token authentication method is selected for encryption then refer to Enabling cluster-wide encryption with the Token authentication using KMS.
- When the Kubernetes authentication method is selected for encryption then refer to Enabling cluster-wide encryption with the Kubernetes authentication using KMS.
- Ensure that you are using signed certificates on your Vault servers.
Minimum starting node requirements
An OpenShift Data Foundation cluster is deployed with minimum configuration when the standard deployment resource requirement is not met. See Resource requirements section in Planning guide.
Regional-DR requirements [Developer preview]
Disaster Recovery features supported by Red Hat OpenShift Data Foundation require all of the following prerequisites in order to successfully implement a Disaster Recovery solution:
- A valid Red Hat OpenShift Data Foundation Advanced subscription
A valid Red Hat Advanced Cluster Management for Kubernetes subscription
To know how subscriptions for OpenShift Data Foundation work, see knowledgebase article on OpenShift Data Foundation subscriptions.
For detailed requirements, see Regional-DR requirements and RHACM requirements.
Chapter 2. Deploying OpenShift Data Foundation on Microsoft Azure
You can deploy OpenShift Data Foundation on OpenShift Container Platform using dynamic storage devices provided by Microsoft Azure installer-provisioned infrastructure (IPI) (type: managed-premium
) that enables you to create internal cluster resources. This results in internal provisioning of the base services, which helps to make additional storage classes available to applications.
Also, it is possible to deploy only the Multicloud Object Gateway (MCG) component with OpenShift Data Foundation. For more information, see Deploy standalone Multicloud Object Gateway.
Only internal OpenShift Data Foundation clusters are supported on Microsoft Azure. See Planning your deployment for more information about deployment requirements.
Ensure that you have addressed the requirements in Preparing to deploy OpenShift Data Foundation chapter before proceeding with the below steps for deploying using dynamic storage devices:
2.1. Installing Red Hat OpenShift Data Foundation Operator
You can install Red Hat OpenShift Data Foundation Operator using the Red Hat OpenShift Container Platform Operator Hub.
Prerequisites
-
Access to an OpenShift Container Platform cluster using an account with
cluster-admin
and Operator installation permissions. - You must have at least three worker nodes in the Red Hat OpenShift Container Platform cluster.
- For additional resource requirements, see the Planning your deployment guide.
When you need to override the cluster-wide default node selector for OpenShift Data Foundation, you can use the following command in the command line interface to specify a blank node selector for the
openshift-storage
namespace (create openshift-storage namespace in this case):$ oc annotate namespace openshift-storage openshift.io/node-selector=
-
Taint a node as
infra
to ensure only Red Hat OpenShift Data Foundation resources are scheduled on that node. This helps you save on subscription costs. For more information, see How to use dedicated worker nodes for Red Hat OpenShift Data Foundation chapter in the Managing and Allocating Storage Resources guide.
Procedure
- Log in to the OpenShift Web Console.
- Click Operators → OperatorHub.
-
Scroll or type
OpenShift Data Foundation
into the Filter by keyword box to find the OpenShift Data Foundation Operator. - Click Install.
Set the following options on the Install Operator page:
- Update Channel as stable-4.10.
- Installation Mode as A specific namespace on the cluster.
-
Installed Namespace as Operator recommended namespace openshift-storage. If Namespace
openshift-storage
does not exist, it is created during the operator installation. Select Approval Strategy as Automatic or Manual.
If you select Automatic updates, then the Operator Lifecycle Manager (OLM) automatically upgrades the running instance of your Operator without any intervention.
If you select Manual updates, then the OLM creates an update request. As a cluster administrator, you must then manually approve that update request to update the Operator to a newer version.
- Ensure that the Enable option is selected for the Console plugin.
- Click Install.
Verification steps
-
After the operator is successfully installed, a pop-up with a message,
Web console update is available
appears on the user interface. Click Refresh web console from this pop-up for the console changes to reflect. In the Web Console:
- Navigate to Installed Operators and verify that the OpenShift Data Foundation Operator shows a green tick indicating successful installation.
- Navigate to Storage and verify if Data Foundation dashboard is available.
2.2. Enabling cluster-wide encryption with KMS using the Token authentication method
To enable the key value backend path and policy in Vault for the Token authentication, follow the procedure:
Prerequisites
- Administrator access to Vault.
- A valid Red Hat OpenShift Data Foundation Advanced subscription. For more information, see the knowledgebase article on OpenShift Data Foundation subscriptions.
-
Carefully, select a unique path name as the backend
path
that follows the naming convention since it cannot be changed later.
Procedure
Enable the Key/Value (KV) backend path in Vault.
For Vault KV secret engine API, version 1:
$ vault secrets enable -path=odf kv
For Vault KV secret engine API, version 2:
$ vault secrets enable -path=odf kv-v2
Create a policy to restrict users to perform a write or delete operation on the secret using the following commands.
echo ' path "odf/*" { capabilities = ["create", "read", "update", "delete", "list"] } path "sys/mounts" { capabilities = ["read"] }'| vault policy write odf -
Create a token matching the above policy.
$ vault token create -policy=odf -format json
2.3. Enabling cluster-wide encryption with KMS using the Kubernetes authentication method
You can enable the Kubernetes authentication method for cluster-wide encryption using the Key Management System (KMS).
Prerequisites
- Administrator access to Vault.
- A valid Red Hat OpenShift Data Foundation Advanced subscription. For more information, see the knowledgebase article on OpenShift Data Foundation subscriptions.
- The OpenShift Data Foundation operator must be installed from the Operator Hub.
Select a unique path name as the backend
path
that follows the naming convention since it cannot be changed later.NoteUse of Vault Namespaces is not supported with the Kubernetes authentication method in OpenShift Data Foundation 4.10
Procedure
Create a service account:
$ oc -n openshift-storage create serviceaccount <serviceaccount_name>
where,
<serviceaccount_name>
specifies the name of the service account.For example:
$ oc -n openshift-storage create serviceaccount odf-vault-auth
Create
clusterrolebindings
andclusterroles
:$ oc -n openshift-storage create clusterrolebinding vault-tokenreview-binding --clusterrole=system:auth-delegator --serviceaccount=openshift-storage:_<serviceaccount_name>_
For example:
$ oc -n openshift-storage create clusterrolebinding vault-tokenreview-binding --clusterrole=system:auth-delegator --serviceaccount=openshift-storage:odf-vault-auth
Depending on the OpenShift Container Platform version, perform one of the following:
For OpenShift Container Platform 4.10:
Identify the secret name associated with the serviceaccount (SA) created above.
$ VAULT_SA_SECRET_NAME=$(oc -n openshift-storage get sa <SA_NAME> -o jsonpath="{.secrets[*]['name']}") | grep -o "[^[:space:]]*-token-[^[:space:]]*"
For example:
$ VAULT_SA_SECRET_NAME=$(oc -n openshift-storage get sa odf-vault-auth -o jsonpath="{.secrets[*]['name']}" | grep -o "[^[:space:]]*-token-[^[:space:]]*")
For OpenShift Container Platform 4.11:
Create a secret for the
serviceaccount
token and CA certificate.$ cat <<EOF | oc create -f - apiVersion: v1 kind: Secret metadata: name: odf-vault-auth-token namespace: openshift-storage annotations: kubernetes.io/service-account.name: <serviceaccount_name> type: kubernetes.io/service-account-token data: {} EOF
where,
<serviceaccount_name>
is the service account created in the earlier step.$ VAULT_SA_SECRET_NAME=odf-vault-auth-token
Get the token and the CA certificate from the secret.
$ SA_JWT_TOKEN=$(oc -n openshift-storage get secret "$VAULT_SA_SECRET_NAME" -o jsonpath="{.data.token}" | base64 --decode; echo) $ SA_CA_CRT=$(oc -n openshift-storage get secret "$VAULT_SA_SECRET_NAME" -o jsonpath="{.data['ca\.crt']}" | base64 --decode; echo)
Retrieve the OCP cluster endpoint.
$ OCP_HOST=$(oc config view --minify --flatten -o jsonpath="{.clusters[0].cluster.server}")
Fetch the service account issuer.
$ oc proxy & $ proxy_pid=$! $ issuer="$( curl --silent http://127.0.0.1:8001/.well-known/openid-configuration | jq -r .issuer)" $ kill $proxy_pid
Use the information collected in the steps above to setup the Kubernetes authentication method in Vault as shown below.
$ vault auth enable kubernetes $ vault write auth/kubernetes/config \ token_reviewer_jwt="$SA_JWT_TOKEN" \ kubernetes_host="$OCP_HOST" \ kubernetes_ca_cert="$SA_CA_CRT" \ issuer="$issuer"
ImportantTo configure Kubernetes authentication method in Vault when the issuer is empty.
$ vault write auth/kubernetes/config \ token_reviewer_jwt="$SA_JWT_TOKEN" \ kubernetes_host="$OCP_HOST" \ kubernetes_ca_cert="$SA_CA_CRT"
Enable the Key/Value (KV) backend path in Vault.
For Vault KV secret engine API, version 1.
$ vault secrets enable -path=odf kv
For Vault KV secret engine API, version 2.
$ vault secrets enable -path=odf kv-v2
Create a policy to restrict users to perform a write or delete operation on the secret:
echo ' path "odf/*" { capabilities = ["create", "read", "update", "delete", "list"] } path "sys/mounts" { capabilities = ["read"] }'| vault policy write odf -
Generate the roles:
$ vault write auth/kubernetes/role/odf-rook-ceph-op \ bound_service_account_names=rook-ceph-system,rook-ceph-osd,noobaa \ bound_service_account_namespaces=openshift-storage \ policies=odf \ ttl=1440h
The role
odf-rook-ceph-op
is later used while you configure the KMS connection details during the creation of the storage system.$ vault write auth/kubernetes/role/odf-rook-ceph-osd \ bound_service_account_names=rook-ceph-osd \ bound_service_account_namespaces=openshift-storage \ policies=odf \ ttl=1440h
2.4. Creating an OpenShift Data Foundation cluster
Create an OpenShift Data Foundation cluster after you install the OpenShift Data Foundation operator.
Prerequisites
- The OpenShift Data Foundation operator must be installed from the Operator Hub. For more information, see Installing OpenShift Data Foundation Operator using the Operator Hub.
Procedure
In the OpenShift Web Console, click Operators → Installed Operators to view all the installed operators.
Ensure that the Project selected is
openshift-storage
.- Click on the OpenShift Data Foundation operator, and then click Create StorageSystem.
In the Backing storage page, select the following:
- Select Full Deployment for the Deployment type option.
- Select the Use an existing StorageClass option.
Select the Storage Class.
By default, it is set to
managed-premium
.- Click Next.
In the Capacity and nodes page, provide the necessary information:
Select a value for Requested Capacity from the dropdown list. It is set to
2 TiB
by default.NoteOnce you select the initial storage capacity, cluster expansion is performed only using the selected usable capacity (three times of raw storage).
- In the Select Nodes section, select at least three available nodes.
Optional: Select the Taint nodes checkbox to dedicate the selected nodes for OpenShift Data Foundation.
For cloud platforms with multiple availability zones, ensure that the Nodes are spread across different Locations/availability zones.
If the nodes selected do not match the OpenShift Data Foundation cluster requirements of an aggregated 30 CPUs and 72 GiB of RAM, a minimal cluster is deployed. For minimum starting node requirements, see the Resource requirements section in the Planning guide.
- Click Next.
Optional: In the Security and network page, configure the following based on your requirements:
- To enable encryption, select Enable data encryption for block and file storage.
Select either one or both the encryption levels:
Cluster-wide encryption
Encrypts the entire cluster (block and file).
StorageClass encryption
Creates encrypted persistent volume (block only) using encryption enabled storage class.
Select the Connect to an external key management service checkbox. This is optional for cluster-wide encryption.
-
Key Management Service Provider is set to
Vault
by default. Select an Authentication Method.
- Using Token authentication method
- Enter a unique Connection Name, host Address of the Vault server ('https://<hostname or ip>'), Port number and Token.
Expand Advanced Settings to enter additional settings and certificate details based on your
Vault
configuration:- Enter the Key Value secret path in Backend Path that is dedicated and unique to OpenShift Data Foundation.
- Optional: Enter TLS Server Name and Vault Enterprise Namespace.
- Upload the respective PEM encoded certificate file to provide the CA Certificate, Client Certificate and Client Private Key .
- Click Save.
- Using Kubernetes authentication method
- Enter a unique Vault Connection Name, host Address of the Vault server ('https://<hostname or ip>'), Port number and Role name.
Expand Advanced Settings to enter additional settings and certificate details based on your
Vault
configuration:- Enter the Key Value secret path in Backend Path that is dedicated and unique to OpenShift Data Foundation.
- Optional: Enter TLS Server Name and Authentication Path if applicable.
- Upload the respective PEM encoded certificate file to provide the CA Certificate, Client Certificate and Client Private Key .
- Click Save.
-
Key Management Service Provider is set to
- Click Next.
In the Review and create page, review the configuration details.
To modify any configuration settings, click Back.
- Click Create StorageSystem.
Verification steps
To verify the final Status of the installed storage cluster:
- In the OpenShift Web Console, navigate to Installed Operators → OpenShift Data Foundation → Storage System → ocs-storagecluster-storagesystem → Resources.
-
Verify that
Status
ofStorageCluster
isReady
and has a green tick mark next to it.
- To verify that all components for OpenShift Data Foundation are successfully installed, see Verifying your OpenShift Data Foundation deployment.
Additional resources
To enable Overprovision Control alerts, refer to Alerts in Monitoring guide.
Chapter 3. Deploying OpenShift Data Foundation on Azure Red Hat OpenShift
The Azure Red Hat OpenShift service enables you to deploy fully managed OpenShift clusters. Red Hat OpenShift Data Foundation can be deployed on Azure Red Hat OpenShift service.
OpenShift Data Foundation on Azure Red Hat OpenShift is not a managed service offering. Red Hat OpenShift Data Foundation subscriptions are required to have the installation supported by the Red Hat support team. Open support cases by choosing the product as Red Hat OpenShift Data Foundation with the Red Hat support team (and not Microsoft) if you need any assistance for Red Hat OpenShift Data Foundation on Azure Red Hat OpenShift.
To install OpenShift Data Foundation on Azure Red Hat OpenShift, follow sections:
- Getting a Red Hat pull secret for new deployment of Azure Red Hat OpenShift.
- Preparing a Red Hat pull secret for existing Azure Red Hat OpenShift clusters.
- Adding the pull secret to the cluster.
- Validating your Red Hat pull secret is working.
- Install the Red Hat OpenShift Data Foundation Operator.
- Create the OpenShift Data Foundation Cluster Service.
3.1. Getting a Red Hat pull secret for new deployment of Azure Red Hat OpenShift
A Red Hat pull secret enables the cluster to access Red Hat container registries along with additional content.
Prerequisites
- A Red Hat portal account.
- OpenShift Data Foundation subscription.
Procedure
To get a Red Hat pull secret for a new deployment of Azure Red Hat OpenShift, follow the steps in the section Get a Red Hat pull secret in the official Microsoft Azure documentation.
Note that while creating the Azure Red Hat OpenShift cluster, you may need larger worker nodes, controlled by --worker-vm-size or more worker nodes, controlled by --worker-count. The recommended worker-vm-size is Standard_D16s_v3. You can also use dedicated worker nodes, for more information, see How to use dedicated worker nodes for Red Hat OpenShift Data Foundation in the Managing and allocating storage resources guide.
3.2. Preparing a Red Hat pull secret for existing Azure Red Hat OpenShift clusters
When you create an Azure Red Hat OpenShift cluster without adding a Red Hat pull secret, a pull secret is still created on the cluster automatically. However, this pull secret is not fully populated.
Use this section to update the automatically created pull secret with the additional values from the Red Hat pull secret.
Prerequisites
- Existing Azure Red Hat OpenShift cluster without a Red Hat pull secret.
Procedure
To prepare a Red Hat pull secret for existing an existing Azure Red Hat OpenShift clusters, follow the steps in the section Prepare your pull secret in the official Mircosoft Azure documentation.
3.3. Adding the pull secret to the cluster
Prerequisites
- A Red Hat pull secret.
Procedure
Run the following command to update your pull secret.
NoteRunning this command causes the cluster nodes to restart one by one as they are updated.
oc set data secret/pull-secret -n openshift-config --from-file=.dockerconfigjson=./pull-secret.json
After the secret is set, you can enable the Red Hat Certified Operators.
3.3.1. Modifying the configuration files to enable Red Hat operators
To modify the configuration files to enable Red Hat operators, follow the steps in the section Modify the configuration files in the official Microsoft Azure documentation.
3.4. Validating your Red Hat pull secret is working
After you add the pull secret and modify the configuration files, the cluster can take several minutes to get updated.
To check if the cluster has been updated, run the following command to show the Certified Operators and Red Hat Operators sources available:
$ oc get catalogsource -A NAMESPACE NAME DISPLAY openshift-marketplace redhat-operators Red Hat Operators TYPE PUBLISHER AGE grpc Red Hat 11s
If you do not see the Red Hat Operators, wait a few minutes and try again.
To ensure that your pull secret has been updated and is working correctly, open Operator Hub and check for any Red Hat verified Operator. For example, check if the OpenShift Data Foundation Operator is available, and see if you have permissions to install it.
3.5. Installing Red Hat OpenShift Data Foundation Operator
You can install Red Hat OpenShift Data Foundation Operator using the Red Hat OpenShift Container Platform Operator Hub.
Prerequisites
-
Access to an OpenShift Container Platform cluster using an account with
cluster-admin
and Operator installation permissions. - You must have at least three worker nodes in the Red Hat OpenShift Container Platform cluster.
- For additional resource requirements, see the Planning your deployment guide.
When you need to override the cluster-wide default node selector for OpenShift Data Foundation, you can use the following command in the command line interface to specify a blank node selector for the
openshift-storage
namespace (create openshift-storage namespace in this case):$ oc annotate namespace openshift-storage openshift.io/node-selector=
-
Taint a node as
infra
to ensure only Red Hat OpenShift Data Foundation resources are scheduled on that node. This helps you save on subscription costs. For more information, see How to use dedicated worker nodes for Red Hat OpenShift Data Foundation chapter in the Managing and Allocating Storage Resources guide.
Procedure
- Log in to the OpenShift Web Console.
- Click Operators → OperatorHub.
-
Scroll or type
OpenShift Data Foundation
into the Filter by keyword box to find the OpenShift Data Foundation Operator. - Click Install.
Set the following options on the Install Operator page:
- Update Channel as stable-4.10.
- Installation Mode as A specific namespace on the cluster.
-
Installed Namespace as Operator recommended namespace openshift-storage. If Namespace
openshift-storage
does not exist, it is created during the operator installation. Select Approval Strategy as Automatic or Manual.
If you select Automatic updates, then the Operator Lifecycle Manager (OLM) automatically upgrades the running instance of your Operator without any intervention.
If you select Manual updates, then the OLM creates an update request. As a cluster administrator, you must then manually approve that update request to update the Operator to a newer version.
- Ensure that the Enable option is selected for the Console plugin.
- Click Install.
Verification steps
-
After the operator is successfully installed, a pop-up with a message,
Web console update is available
appears on the user interface. Click Refresh web console from this pop-up for the console changes to reflect. In the Web Console:
- Navigate to Installed Operators and verify that the OpenShift Data Foundation Operator shows a green tick indicating successful installation.
- Navigate to Storage and verify if Data Foundation dashboard is available.
3.6. Creating an OpenShift Data Foundation cluster
Create an OpenShift Data Foundation cluster after you install the OpenShift Data Foundation operator.
Prerequisites
- The OpenShift Data Foundation operator must be installed from the Operator Hub. For more information, see Installing OpenShift Data Foundation Operator using the Operator Hub.
Procedure
In the OpenShift Web Console, click Operators → Installed Operators to view all the installed operators.
Ensure that the Project selected is
openshift-storage
.- Click on the OpenShift Data Foundation operator, and then click Create StorageSystem.
In the Backing storage page, select the following:
- Select Full Deployment for the Deployment type option.
- Select the Use an existing StorageClass option.
Select the Storage Class.
By default, it is set to
managed-premium
.- Click Next.
In the Capacity and nodes page, provide the necessary information:
Select a value for Requested Capacity from the dropdown list. It is set to
2 TiB
by default.NoteOnce you select the initial storage capacity, cluster expansion is performed only using the selected usable capacity (three times of raw storage).
- In the Select Nodes section, select at least three available nodes.
Optional: Select the Taint nodes checkbox to dedicate the selected nodes for OpenShift Data Foundation.
For cloud platforms with multiple availability zones, ensure that the Nodes are spread across different Locations/availability zones.
If the nodes selected do not match the OpenShift Data Foundation cluster requirements of an aggregated 30 CPUs and 72 GiB of RAM, a minimal cluster is deployed. For minimum starting node requirements, see the Resource requirements section in the Planning guide.
- Click Next.
Optional: In the Security and network page, configure the following based on your requirements:
- To enable encryption, select Enable data encryption for block and file storage.
Select either one or both the encryption levels:
Cluster-wide encryption
Encrypts the entire cluster (block and file).
StorageClass encryption
Creates encrypted persistent volume (block only) using encryption enabled storage class.
Select the Connect to an external key management service checkbox. This is optional for cluster-wide encryption.
-
Key Management Service Provider is set to
Vault
by default. Select an Authentication Method.
- Using Token authentication method
- Enter a unique Connection Name, host Address of the Vault server ('https://<hostname or ip>'), Port number and Token.
Expand Advanced Settings to enter additional settings and certificate details based on your
Vault
configuration:- Enter the Key Value secret path in Backend Path that is dedicated and unique to OpenShift Data Foundation.
- Optional: Enter TLS Server Name and Vault Enterprise Namespace.
- Upload the respective PEM encoded certificate file to provide the CA Certificate, Client Certificate and Client Private Key .
- Click Save.
- Using Kubernetes authentication method
- Enter a unique Vault Connection Name, host Address of the Vault server ('https://<hostname or ip>'), Port number and Role name.
Expand Advanced Settings to enter additional settings and certificate details based on your
Vault
configuration:- Enter the Key Value secret path in Backend Path that is dedicated and unique to OpenShift Data Foundation.
- Optional: Enter TLS Server Name and Authentication Path if applicable.
- Upload the respective PEM encoded certificate file to provide the CA Certificate, Client Certificate and Client Private Key .
- Click Save.
-
Key Management Service Provider is set to
- Click Next.
In the Review and create page, review the configuration details.
To modify any configuration settings, click Back.
- Click Create StorageSystem.
Verification steps
To verify the final Status of the installed storage cluster:
- In the OpenShift Web Console, navigate to Installed Operators → OpenShift Data Foundation → Storage System → ocs-storagecluster-storagesystem → Resources.
-
Verify that
Status
ofStorageCluster
isReady
and has a green tick mark next to it.
- To verify that all components for OpenShift Data Foundation are successfully installed, see Verifying your OpenShift Data Foundation deployment.
Additional resources
To enable Overprovision Control alerts, refer to Alerts in Monitoring guide.
Chapter 4. Verifying OpenShift Data Foundation deployment
Use this section to verify that OpenShift Data Foundation is deployed correctly.
4.1. Verifying the state of the pods
Procedure
- Click Workloads → Pods from the OpenShift Web Console.
Select
openshift-storage
from the Project drop-down list.NoteIf the Show default projects option is disabled, use the toggle button to list all the default projects.
For more information on the expected number of pods for each component and how it varies depending on the number of nodes, see Table 4.1, “Pods corresponding to OpenShift Data Foundation cluster”.
Click the Running and Completed tabs to verify that the following pods are in
Running
andCompleted
state:Table 4.1. Pods corresponding to OpenShift Data Foundation cluster Component Corresponding pods OpenShift Data Foundation Operator
-
ocs-operator-*
(1 pod on any worker node) -
ocs-metrics-exporter-*
(1 pod on any worker node) -
odf-operator-controller-manager-*
(1 pod on any worker node) -
odf-console-*
(1 pod on any worker node) -
csi-addons-controller-manager-*
(1 pod on any worker node)
Rook-ceph Operator
rook-ceph-operator-*
(1 pod on any worker node)
Multicloud Object Gateway
-
noobaa-operator-*
(1 pod on any worker node) -
noobaa-core-*
(1 pod on any storage node) -
noobaa-db-pg-*
(1 pod on any storage node) -
noobaa-endpoint-*
(1 pod on any storage node)
MON
rook-ceph-mon-*
(3 pods distributed across storage nodes)
MGR
rook-ceph-mgr-*
(1 pod on any storage node)
MDS
rook-ceph-mds-ocs-storagecluster-cephfilesystem-*
(2 pods distributed across storage nodes)
CSI
cephfs
-
csi-cephfsplugin-*
(1 pod on each worker node) -
csi-cephfsplugin-provisioner-*
(2 pods distributed across worker nodes)
-
rbd
-
csi-rbdplugin-*
(1 pod on each worker node) -
csi-rbdplugin-provisioner-*
(2 pods distributed across worker nodes)
-
rook-ceph-crashcollector
rook-ceph-crashcollector-*
(1 pod on each storage node)
OSD
-
rook-ceph-osd-*
(1 pod for each device) -
rook-ceph-osd-prepare-ocs-deviceset-*
(1 pod for each device)
-
4.2. Verifying the OpenShift Data Foundation cluster is healthy
Procedure
- In the OpenShift Web Console, click Storage → Data Foundation.
- In the Status card of the Overview tab, click Storage System and then click the storage system link from the pop up that appears.
- In the Status card of the Block and File tab, verify that Storage Cluster has a green tick.
- In the Details card, verify that the cluster information is displayed.
For more information on the health of the OpenShift Data Foundation cluster using the Block and File dashboard, see Monitoring OpenShift Data Foundation.
4.3. Verifying the Multicloud Object Gateway is healthy
Procedure
- In the OpenShift Web Console, click Storage → Data Foundation.
In the Status card of the Overview tab, click Storage System and then click the storage system link from the pop up that appears.
- In the Status card of the Object tab, verify that both Object Service and Data Resiliency have a green tick.
- In the Details card, verify that the MCG information is displayed.
For more information on the health of the OpenShift Data Foundation cluster using the object service dashboard, see Monitoring OpenShift Data Foundation.
4.4. Verifying that the OpenShift Data Foundation specific storage classes exist
Procedure
- Click Storage → Storage Classes from the left pane of the OpenShift Web Console.
Verify that the following storage classes are created with the OpenShift Data Foundation cluster creation:
-
ocs-storagecluster-ceph-rbd
-
ocs-storagecluster-cephfs
-
openshift-storage.noobaa.io
-
Chapter 5. Deploy standalone Multicloud Object Gateway
Deploying only the Multicloud Object Gateway component with OpenShift Data Foundation provides the flexibility in deployment and helps to reduce the resource consumption. Use this section to deploy only the standalone Multicloud Object Gateway component, which involves the following steps:
- Installing Red Hat OpenShift Data Foundation Operator
- Creating standalone Multicloud Object Gateway
5.1. Installing Red Hat OpenShift Data Foundation Operator
You can install Red Hat OpenShift Data Foundation Operator using the Red Hat OpenShift Container Platform Operator Hub.
Prerequisites
-
Access to an OpenShift Container Platform cluster using an account with
cluster-admin
and Operator installation permissions. - You must have at least three worker nodes in the Red Hat OpenShift Container Platform cluster.
- For additional resource requirements, see the Planning your deployment guide.
When you need to override the cluster-wide default node selector for OpenShift Data Foundation, you can use the following command in the command line interface to specify a blank node selector for the
openshift-storage
namespace (create openshift-storage namespace in this case):$ oc annotate namespace openshift-storage openshift.io/node-selector=
-
Taint a node as
infra
to ensure only Red Hat OpenShift Data Foundation resources are scheduled on that node. This helps you save on subscription costs. For more information, see How to use dedicated worker nodes for Red Hat OpenShift Data Foundation chapter in the Managing and Allocating Storage Resources guide.
Procedure
- Log in to the OpenShift Web Console.
- Click Operators → OperatorHub.
-
Scroll or type
OpenShift Data Foundation
into the Filter by keyword box to find the OpenShift Data Foundation Operator. - Click Install.
Set the following options on the Install Operator page:
- Update Channel as stable-4.10.
- Installation Mode as A specific namespace on the cluster.
-
Installed Namespace as Operator recommended namespace openshift-storage. If Namespace
openshift-storage
does not exist, it is created during the operator installation. Select Approval Strategy as Automatic or Manual.
If you select Automatic updates, then the Operator Lifecycle Manager (OLM) automatically upgrades the running instance of your Operator without any intervention.
If you select Manual updates, then the OLM creates an update request. As a cluster administrator, you must then manually approve that update request to update the Operator to a newer version.
- Ensure that the Enable option is selected for the Console plugin.
- Click Install.
Verification steps
-
After the operator is successfully installed, a pop-up with a message,
Web console update is available
appears on the user interface. Click Refresh web console from this pop-up for the console changes to reflect. In the Web Console:
- Navigate to Installed Operators and verify that the OpenShift Data Foundation Operator shows a green tick indicating successful installation.
- Navigate to Storage and verify if Data Foundation dashboard is available.
5.2. Creating a standalone Multicloud Object Gateway
You can create only the standalone Multicloud Object Gateway component while deploying OpenShift Data Foundation.
Prerequisites
- Ensure that the OpenShift Data Foundation Operator is installed.
Procedure
In the OpenShift Web Console, click Operators → Installed Operators to view all the installed operators.
Ensure that the Project selected is
openshift-storage
.- Click OpenShift Data Foundation operator and then click Create StorageSystem.
In the Backing storage page, select the following:
- Select Multicloud Object Gateway for Deployment type.
- Select the Use an existing StorageClass option.
- Click Next.
Optional: In the Security page, select Connect to an external key management service.
-
Key Management Service Provider is set to
Vault
by default. - Enter Vault Service Name, host Address of Vault server ('https://<hostname or ip>'), Port number, and Token.
Expand Advanced Settings to enter additional settings and certificate details based on your
Vault
configuration:- Enter the Key Value secret path in the Backend Path that is dedicated and unique to OpenShift Data Foundation.
- Optional: Enter TLS Server Name and Vault Enterprise Namespace.
- Upload the respective PEM encoded certificate file to provide the CA Certificate, Client Certificate, and Client Private Key.
- Click Save.
- Click Next.
-
Key Management Service Provider is set to
In the Review and create page, review the configuration details:
To modify any configuration settings, click Back.
- Click Create StorageSystem.
Verification steps
- Verifying that the OpenShift Data Foundation cluster is healthy
- In the OpenShift Web Console, click Storage → Data Foundation.
In the Status card of the Overview tab, click Storage System and then click the storage system link from the pop up that appears.
- In the Status card of the Object tab, verify that both Object Service and Data Resiliency have a green tick.
- In the Details card, verify that the MCG information is displayed.
- Verifying the state of the pods
- Click Workloads → Pods from the OpenShift Web Console.
Select
openshift-storage
from the Project drop-down list and verify that the following pods are inRunning
state.NoteIf the Show default projects option is disabled, use the toggle button to list all the default projects.
Component Corresponding pods OpenShift Data Foundation Operator
-
ocs-operator-*
(1 pod on any worker node) -
ocs-metrics-exporter-*
(1 pod on any worker node) -
odf-operator-controller-manager-*
(1 pod on any worker node) -
odf-console-*
(1 pod on any worker node) -
csi-addons-controller-manager-*
(1 pod on any worker node)
Rook-ceph Operator
rook-ceph-operator-*
(1 pod on any worker node)
Multicloud Object Gateway
-
noobaa-operator-*
(1 pod on any worker node) -
noobaa-core-*
(1 pod on any worker node) -
noobaa-db-pg-*
(1 pod on any worker node) -
noobaa-endpoint-*
(1 pod on any worker node)
-
Chapter 6. Uninstalling OpenShift Data Foundation
6.1. Uninstalling OpenShift Data Foundation in Internal mode
To uninstall OpenShift Data Foundation in Internal mode, refer to the knowledge base article on Uninstalling OpenShift Data Foundation.