Deploying OpenShift Data Foundation using Amazon Web Services


Red Hat OpenShift Data Foundation 4.12

Instructions for deploying OpenShift Data Foundation using Amazon Web Services for cloud storage

Red Hat Storage Documentation Team

Abstract

Read this document for instructions about how to install Red Hat OpenShift Data Foundation using Red Hat OpenShift Container Platform on Amazon Web Services.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. We are beginning with these four terms: master, slave, blacklist, and whitelist. Because of the enormity of this endeavor, these changes will be implemented gradually over several upcoming releases. For more details, see our CTO Chris Wright’s message.

Providing feedback on Red Hat documentation

We appreciate your input on our documentation. Do let us know how we can make it better.

To give feedback, create a Bugzilla ticket:

  1. Go to the Bugzilla website.
  2. In the Component section, choose documentation.
  3. Fill in the Description field with your suggestion for improvement. Include a link to the relevant part(s) of documentation.
  4. Click Submit Bug.

Preface

Red Hat OpenShift Data Foundation supports deployment on existing Red Hat OpenShift Container Platform (RHOCP) AWS clusters in connected or disconnected environments along with out-of-the-box support for proxy environments.

Note

Only internal OpenShift Data Foundation clusters are supported on AWS. See Planning your deployment and Preparing to deploy OpenShift Data Foundation for more information about deployment requirements.

To deploy OpenShift Data Foundation, start with the requirements in Preparing to deploy OpenShift Data Foundation chapter and then follow the deployment process for your environment based on your requirement:

Chapter 1. Preparing to deploy OpenShift Data Foundation

Deploying OpenShift Data Foundation on OpenShift Container Platform using dynamic storage devices provides you with the option to create internal cluster resources.

Before you begin the deployment of Red Hat OpenShift Data Foundation, follow these steps:

  1. Optional: If you want to enable cluster-wide encryption using the external Key Management System (KMS) HashiCorp Vault, follow these steps:

  2. Optional: If you want to enable cluster-wide encryption using the external Key Management System (KMS) Thales CipherTrust Manager, you must first enable the Key Management Interoperability Protocol (KMIP) and use signed certificates on your server. Follow these steps:

    1. Create a KMIP client if one does not exist. From the user interface, select KMIPClient ProfileAdd Profile.

      1. Add the CipherTrust username to the Common Name field during profile creation.
    2. Create a token by navigating to KMIPRegistration TokenNew Registration Token. Copy the token for the next step.
    3. To register the client, navigate to KMIPRegistered ClientsAdd Client. Specify the Name. Paste the Registration Token from the previous step, then click Save.
    4. Download the Private Key and Client Certificate by clicking Save Private Key and Save Certificate respectively.
    5. To create a new KMIP interface, navigate to Admin SettingsInterfacesAdd Interface.

      1. Select KMIP Key Management Interoperability Protocol and click Next.
      2. Select a free Port.
      3. Select Network Interface as all.
      4. Select Interface Mode as TLS, verify client cert, user name taken from client cert, auth request is optional.
      5. (Optional) You can enable hard delete to delete both metadata and material when the key is deleted. It is disabled by default.
      6. Select the CA to be used, and click Save.
    6. To get the server CA certificate, click on the Action menu (⋮) on the right of the newly created interface, and click Download Certificate.
    7. Optional: If StorageClass encryption is to be enabled during deployment, create a key to act as the Key Encryption Key (KEK):

      1. Navigate to KeysAdd Key.
      2. Enter Key Name.
      3. Set the Algorithm and Size to AES and 256 respectively.
      4. Enable Create a key in Pre-Active state and set the date and time for activation.
      5. Ensure that Encrypt and Decrypt are enabled under Key Usage.
      6. Copy the ID of the newly created Key to be used as the Unique Identifier during deployment.
  3. Minimum starting node requirements

    An OpenShift Data Foundation cluster is deployed with minimum configuration when the standard deployment resource requirement is not met. See Resource requirements section in the Planning guide.

  4. Disaster recovery requirements [Technology Preview]

    Disaster Recovery features supported by Red Hat OpenShift Data Foundation require all of the following prerequisites to successfully implement a disaster recovery solution:

    For detailed requirements, see Configuring OpenShift Data Foundation Disaster Recovery for OpenShift Workloads guide, and Requirements and recommendations section of the Install guide in Red Hat Advanced Cluster Management for Kubernetes documentation.

Chapter 2. Deploy OpenShift Data Foundation using dynamic storage devices

You can deploy OpenShift Data Foundation on OpenShift Container Platform using dynamic storage devices provided by Amazon Web Services (AWS) EBS (type, gp2-csi or gp3-csi) that provides you with the option to create internal cluster resources. This results in the internal provisioning of the base services, which helps to make additional storage classes available to applications.

Also, it is possible to deploy only the Multicloud Object Gateway (MCG) component with OpenShift Data Foundation. For more information, see Deploy standalone Multicloud Object Gateway.

Note

Only internal OpenShift Data Foundation clusters are supported on AWS. See Planning your deployment for more information about deployment requirements.

Also, ensure that you have addressed the requirements in Preparing to deploy OpenShift Data Foundation chapter before proceeding with the below steps for deploying using dynamic storage devices:

2.1. Installing Red Hat OpenShift Data Foundation Operator

You can install Red Hat OpenShift Data Foundation Operator using the Red Hat OpenShift Container Platform Operator Hub.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with cluster-admin and operator installation permissions.
  • You must have at least three worker nodes in the Red Hat OpenShift Container Platform cluster. Each node should include one disk and requires 3 disks (PVs). However, one PV remains eventually unused by default. This is an expected behavior.
  • For additional resource requirements, see the Planning your deployment guide.
Important
  • When you need to override the cluster-wide default node selector for OpenShift Data Foundation, you can use the following command to specify a blank node selector for the openshift-storage namespace (create openshift-storage namespace in this case):

    $ oc annotate namespace openshift-storage openshift.io/node-selector=
  • Taint a node as infra to ensure only Red Hat OpenShift Data Foundation resources are scheduled on that node. This helps you save on subscription costs. For more information, see the How to use dedicated worker nodes for Red Hat OpenShift Data Foundation section in the Managing and Allocating Storage Resources guide.

Procedure

  1. Log in to the OpenShift Web Console.
  2. Click Operators → OperatorHub.
  3. Scroll or type OpenShift Data Foundation into the Filter by keyword box to find the OpenShift Data Foundation Operator.
  4. Click Install.
  5. Set the following options on the Install Operator page:

    1. Update Channel as stable-4.12.
    2. Installation Mode as A specific namespace on the cluster.
    3. Installed Namespace as Operator recommended namespace openshift-storage. If Namespace openshift-storage does not exist, it is created during the operator installation.
    4. Select Approval Strategy as Automatic or Manual.

      If you select Automatic updates, then the Operator Lifecycle Manager (OLM) automatically upgrades the running instance of your Operator without any intervention.

      If you select Manual updates, then the OLM creates an update request. As a cluster administrator, you must then manually approve that update request to update the Operator to a newer version.

    5. Ensure that the Enable option is selected for the Console plugin.
    6. Click Install.

Verification steps

  • After the operator is successfully installed, a pop-up with a message, Web console update is available appears on the user interface. Click Refresh web console from this pop-up for the console changes to reflect.
  • In the Web Console:

    • Navigate to Installed Operators and verify that the OpenShift Data Foundation Operator shows a green tick indicating successful installation.
    • Navigate to Storage and verify if Data Foundation dashboard is available.

2.2. Enabling cluster-wide encryption with KMS using the Token authentication method

You can enable the key value backend path and policy in the vault for token authentication.

Prerequisites

  • Administrator access to the vault.
  • A valid Red Hat OpenShift Data Foundation Advanced subscription. For more information, see the knowledgebase article on OpenShift Data Foundation subscriptions.
  • Carefully, select a unique path name as the backend path that follows the naming convention since you cannot change it later.

Procedure

  1. Enable the Key/Value (KV) backend path in the vault.

    For vault KV secret engine API, version 1:

    $ vault secrets enable -path=odf kv

    For vault KV secret engine API, version 2:

    $ vault secrets enable -path=odf kv-v2
  2. Create a policy to restrict the users to perform a write or delete operation on the secret:

    echo '
    path "odf/*" {
      capabilities = ["create", "read", "update", "delete", "list"]
    }
    path "sys/mounts" {
    capabilities = ["read"]
    }'| vault policy write odf -
  3. Create a token that matches the above policy:

    $ vault token create -policy=odf -format json

2.3. Enabling cluster-wide encryption with KMS using the Kubernetes authentication method

You can enable the Kubernetes authentication method for cluster-wide encryption using the Key Management System (KMS).

Prerequisites

  • Administrator access to Vault.
  • A valid Red Hat OpenShift Data Foundation Advanced subscription. For more information, see the knowledgebase article on OpenShift Data Foundation subscriptions.
  • The OpenShift Data Foundation operator must be installed from the Operator Hub.
  • Select a unique path name as the backend path that follows the naming convention carefully. You cannot change this path name later.

Procedure

  1. Create a service account:

    $ oc -n openshift-storage create serviceaccount <serviceaccount_name>

    where, <serviceaccount_name> specifies the name of the service account.

    For example:

    $ oc -n openshift-storage create serviceaccount odf-vault-auth
  2. Create clusterrolebindings and clusterroles:

    $ oc -n openshift-storage create clusterrolebinding vault-tokenreview-binding --clusterrole=system:auth-delegator --serviceaccount=openshift-storage:_<serviceaccount_name>_

    For example:

    $ oc -n openshift-storage create clusterrolebinding vault-tokenreview-binding --clusterrole=system:auth-delegator --serviceaccount=openshift-storage:odf-vault-auth
  3. Create a secret for the serviceaccount token and CA certificate.

    $ cat <<EOF | oc create -f -
    apiVersion: v1
    kind: Secret
    metadata:
      name: odf-vault-auth-token
      namespace: openshift-storage
      annotations:
        kubernetes.io/service-account.name: <serviceaccount_name>
    type: kubernetes.io/service-account-token
    data: {}
    EOF

    where, <serviceaccount_name> is the service account created in the earlier step.

  4. Get the token and the CA certificate from the secret.

    $ SA_JWT_TOKEN=$(oc -n openshift-storage get secret odf-vault-auth-token -o jsonpath="{.data['token']}" | base64 --decode; echo)
    $ SA_CA_CRT=$(oc -n openshift-storage get secret odf-vault-auth-token -o jsonpath="{.data['ca\.crt']}" | base64 --decode; echo)
  5. Retrieve the OCP cluster endpoint.

    $ OCP_HOST=$(oc config view --minify --flatten -o jsonpath="{.clusters[0].cluster.server}")
  6. Fetch the service account issuer:

    $ oc proxy &
    $ proxy_pid=$!
    $ issuer="$( curl --silent http://127.0.0.1:8001/.well-known/openid-configuration | jq -r .issuer)"
    $ kill $proxy_pid
  7. Use the information collected in the previous step to setup the Kubernetes authentication method in Vault:

    $ vault auth enable kubernetes
    $ vault write auth/kubernetes/config \
              token_reviewer_jwt="$SA_JWT_TOKEN" \
              kubernetes_host="$OCP_HOST" \
              kubernetes_ca_cert="$SA_CA_CRT" \
              issuer="$issuer"
    Important

    To configure the Kubernetes authentication method in Vault when the issuer is empty:

    $ vault write auth/kubernetes/config \
              token_reviewer_jwt="$SA_JWT_TOKEN" \
              kubernetes_host="$OCP_HOST" \
              kubernetes_ca_cert="$SA_CA_CRT"
  8. Enable the Key/Value (KV) backend path in Vault.

    For Vault KV secret engine API, version 1:

    $ vault secrets enable -path=odf kv

    For Vault KV secret engine API, version 2:

    $ vault secrets enable -path=odf kv-v2
  9. Create a policy to restrict the users to perform a write or delete operation on the secret:

    echo '
    path "odf/*" {
      capabilities = ["create", "read", "update", "delete", "list"]
    }
    path "sys/mounts" {
    capabilities = ["read"]
    }'| vault policy write odf -
  10. Generate the roles:

    $ vault write auth/kubernetes/role/odf-rook-ceph-op \
            bound_service_account_names=rook-ceph-system,rook-ceph-osd,noobaa \
            bound_service_account_namespaces=openshift-storage \
            policies=odf \
            ttl=1440h

    The role odf-rook-ceph-op is later used while you configure the KMS connection details during the creation of the storage system.

    $ vault write auth/kubernetes/role/odf-rook-ceph-osd \
            bound_service_account_names=rook-ceph-osd \
            bound_service_account_namespaces=openshift-storage \
            policies=odf \
            ttl=1440h

2.4. Creating an OpenShift Data Foundation cluster

Create an OpenShift Data Foundation cluster after you install the OpenShift Data Foundation operator.

Prerequisites

Procedure

  1. In the OpenShift Web Console, click Operators → Installed Operators to view all the installed operators.

    Ensure that the Project selected is openshift-storage.

  2. Click on the OpenShift Data Foundation operator, and then click Create StorageSystem.
  3. In the Backing storage page, select the following:

    1. Select Full Deployment for the Deployment type option.
    2. Select the Use an existing StorageClass option.
    3. Select the Storage Class.

      As of OpenShift Data Foundation version 4.12, you can choose gp2-csi or gp3-csi as the storage class.

    4. Click Next.
  4. In the Capacity and nodes page, provide the necessary information:

    1. Select a value for Requested Capacity from the dropdown list. It is set to 2 TiB by default.

      Note

      Once you select the initial storage capacity, cluster expansion is performed only using the selected usable capacity (three times of raw storage).

    2. In the Select Nodes section, select at least three available nodes.
    3. Optional: Select the Taint nodes checkbox to dedicate the selected nodes for OpenShift Data Foundation.

      For cloud platforms with multiple availability zones, ensure that the Nodes are spread across different Locations/availability zones.

      If the nodes selected do not match the OpenShift Data Foundation cluster requirements of an aggregated 30 CPUs and 72 GiB of RAM, a minimal cluster is deployed. For minimum starting node requirements, see the Resource requirements section in the Planning guide.

    4. Click Next.
  5. Optional: In the Security and network page, configure the following based on your requirements:

    1. To enable encryption, select Enable data encryption for block and file storage.
    2. Select either one or both the encryption levels:

      • Cluster-wide encryption

        Encrypts the entire cluster (block and file).

      • StorageClass encryption

        Creates encrypted persistent volume (block only) using encryption enabled storage class.

    3. Optional: Select the Connect to an external key management service checkbox. This is optional for cluster-wide encryption.

      1. From the Key Management Service Provider drop-down list, either select Vault or Thales CipherTrust Manager (using KMIP). If you selected Vault, go to the next step. If you selected Thales CipherTrust Manager (using KMIP), go to step iii.
      2. Select an Authentication Method.

        Using Token authentication method
        • Enter a unique Connection Name, host Address of the Vault server ('https://<hostname or ip>'), Port number and Token.
        • Expand Advanced Settings to enter additional settings and certificate details based on your Vault configuration:

          • Enter the Key Value secret path in Backend Path that is dedicated and unique to OpenShift Data Foundation.
          • Optional: Enter TLS Server Name and Vault Enterprise Namespace.
          • Upload the respective PEM encoded certificate file to provide the CA Certificate, Client Certificate and Client Private Key .
          • Click Save and skip to step iv.
        Using Kubernetes authentication method
        • Enter a unique Vault Connection Name, host Address of the Vault server ('https://<hostname or ip>'), Port number and Role name.
        • Expand Advanced Settings to enter additional settings and certificate details based on your Vault configuration:

          • Enter the Key Value secret path in Backend Path that is dedicated and unique to OpenShift Data Foundation.
          • Optional: Enter TLS Server Name and Authentication Path if applicable.
          • Upload the respective PEM encoded certificate file to provide the CA Certificate, Client Certificate and Client Private Key .
          • Click Save and skip to step iv.
      3. To use Thales CipherTrust Manager (using KMIP) as the KMS provider, follow the steps below:

        1. Enter a unique Connection Name for the Key Management service within the project.
        2. In the Address and Port sections, enter the IP of Thales CipherTrust Manager and the port where the KMIP interface is enabled. For example:

          • Address: 123.34.3.2
          • Port: 5696
        3. Upload the Client Certificate, CA certificate, and Client Private Key.
        4. If StorageClass encryption is enabled, enter the Unique Identifier to be used for encryption and decryption generated above.
        5. The TLS Server field is optional and used when there is no DNS entry for the KMIP endpoint. For example, kmip_all_<port>.ciphertrustmanager.local.
      4. Select a Network.
      5. Click Next.
  6. In the Review and create page, review the configuration details.

    To modify any configuration settings, click Back.

  7. Click Create StorageSystem.

Verification steps

  • To verify the final Status of the installed storage cluster:

    1. In the OpenShift Web Console, navigate to Installed OperatorsOpenShift Data FoundationStorage Systemocs-storagecluster-storagesystemResources.
    2. Verify that Status of StorageCluster is Ready and has a green tick mark next to it.
  • To verify that all the components for OpenShift Data Foundation are successfully installed, see Verifying OpenShift Data Foundation deployment.

Additional resources

To enable Overprovision Control alerts, refer to Alerts in Monitoring guide.

2.5. Verifying OpenShift Data Foundation deployment

To verify that OpenShift Data Foundation is deployed correctly:

2.5.1. Verifying the state of the pods

Procedure

  1. Click Workloads → Pods from the OpenShift Web Console.
  2. Select openshift-storage from the Project drop-down list.

    Note

    If the Show default projects option is disabled, use the toggle button to list all the default projects.

    For more information on the expected number of pods for each component and how it varies depending on the number of nodes, see Table 2.1, “Pods corresponding to OpenShift Data Foundation cluster”.

  3. Set filter for Running and Completed pods to verify that the following pods are in Running and Completed state:

    Table 2.1. Pods corresponding to OpenShift Data Foundation cluster
    ComponentCorresponding pods

    OpenShift Data Foundation Operator

    • ocs-operator-* (1 pod on any storage node)
    • ocs-metrics-exporter-* (1 pod on any storage node)
    • odf-operator-controller-manager-* (1 pod on any storage node)
    • odf-console-* (1 pod on any storage node)
    • csi-addons-controller-manager-* (1 pod on any storage node)

    Rook-ceph Operator

    rook-ceph-operator-*

    (1 pod on any storage node)

    Multicloud Object Gateway

    • noobaa-operator-* (1 pod on any storage node)
    • noobaa-core-* (1 pod on any storage node)
    • noobaa-db-pg-* (1 pod on any storage node)
    • noobaa-endpoint-* (1 pod on any storage node)

    MON

    rook-ceph-mon-*

    (3 pods distributed across storage nodes)

    MGR

    rook-ceph-mgr-*

    (1 pod on any storage node)

    MDS

    rook-ceph-mds-ocs-storagecluster-cephfilesystem-*

    (2 pods distributed across storage nodes)

    CSI

    • cephfs

      • csi-cephfsplugin-* (1 pod on each storage node)
      • csi-cephfsplugin-provisioner-* (2 pods distributed across storage nodes)
    • rbd

      • csi-rbdplugin-* (1 pod on each storage node)
      • csi-rbdplugin-provisioner-* (2 pods distributed across storage nodes)

    rook-ceph-crashcollector

    rook-ceph-crashcollector-*

    (1 pod on each storage node)

    OSD

    • rook-ceph-osd-* (1 pod for each device)
    • rook-ceph-osd-prepare-ocs-deviceset-* (1 pod for each device)

2.5.2. Verifying the OpenShift Data Foundation cluster is healthy

Procedure

  1. In the OpenShift Web Console, click StorageData Foundation.
  2. In the Status card of the Overview tab, click Storage System and then click the storage system link from the pop up that appears.
  3. In the Status card of the Block and File tab, verify that Storage Cluster has a green tick.
  4. In the Details card, verify that the cluster information is displayed.

For more information on the health of the OpenShift Data Foundation cluster using the Block and File dashboard, see Monitoring OpenShift Data Foundation.

2.5.3. Verifying the Multicloud Object Gateway is healthy

Procedure

  1. In the OpenShift Web Console, click StorageData Foundation.
  2. In the Status card of the Overview tab, click Storage System and then click the storage system link from the pop up that appears.

    1. In the Status card of the Object tab, verify that both Object Service and Data Resiliency have a green tick.
    2. In the Details card, verify that the MCG information is displayed.

For more information on the health of the OpenShift Data Foundation cluster using the object service dashboard, see link: Monitoring OpenShift Data Foundation.

2.5.4. Verifying that the specific storage classes exist

Procedure

  1. Click Storage → Storage Classes from the left pane of the OpenShift Web Console.
  2. Verify that the following storage classes are created with the OpenShift Data Foundation cluster creation:

    • ocs-storagecluster-ceph-rbd
    • ocs-storagecluster-cephfs
    • openshift-storage.noobaa.io

Chapter 3. Deploy standalone Multicloud Object Gateway

Deploying only the Multicloud Object Gateway component with OpenShift Data Foundation provides the flexibility in deployment and helps to reduce the resource consumption. Use this section to deploy only the standalone Multicloud Object Gateway component, which involves the following steps:

  • Installing Red Hat OpenShift Data Foundation Operator
  • Creating standalone Multicloud Object Gateway

3.1. Installing Red Hat OpenShift Data Foundation Operator

You can install Red Hat OpenShift Data Foundation Operator using the Red Hat OpenShift Container Platform Operator Hub.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with cluster-admin and operator installation permissions.
  • You must have at least three worker nodes in the Red Hat OpenShift Container Platform cluster. Each node should include one disk and requires 3 disks (PVs). However, one PV remains eventually unused by default. This is an expected behavior.
  • For additional resource requirements, see the Planning your deployment guide.
Important
  • When you need to override the cluster-wide default node selector for OpenShift Data Foundation, you can use the following command to specify a blank node selector for the openshift-storage namespace (create openshift-storage namespace in this case):

    $ oc annotate namespace openshift-storage openshift.io/node-selector=
  • Taint a node as infra to ensure only Red Hat OpenShift Data Foundation resources are scheduled on that node. This helps you save on subscription costs. For more information, see the How to use dedicated worker nodes for Red Hat OpenShift Data Foundation section in the Managing and Allocating Storage Resources guide.

Procedure

  1. Log in to the OpenShift Web Console.
  2. Click Operators → OperatorHub.
  3. Scroll or type OpenShift Data Foundation into the Filter by keyword box to find the OpenShift Data Foundation Operator.
  4. Click Install.
  5. Set the following options on the Install Operator page:

    1. Update Channel as stable-4.12.
    2. Installation Mode as A specific namespace on the cluster.
    3. Installed Namespace as Operator recommended namespace openshift-storage. If Namespace openshift-storage does not exist, it is created during the operator installation.
    4. Select Approval Strategy as Automatic or Manual.

      If you select Automatic updates, then the Operator Lifecycle Manager (OLM) automatically upgrades the running instance of your Operator without any intervention.

      If you select Manual updates, then the OLM creates an update request. As a cluster administrator, you must then manually approve that update request to update the Operator to a newer version.

    5. Ensure that the Enable option is selected for the Console plugin.
    6. Click Install.

Verification steps

  • After the operator is successfully installed, a pop-up with a message, Web console update is available appears on the user interface. Click Refresh web console from this pop-up for the console changes to reflect.
  • In the Web Console:

    • Navigate to Installed Operators and verify that the OpenShift Data Foundation Operator shows a green tick indicating successful installation.
    • Navigate to Storage and verify if Data Foundation dashboard is available.

3.2. Creating a standalone Multicloud Object Gateway

You can create only the standalone Multicloud Object Gateway component while deploying OpenShift Data Foundation.

Prerequisites

  • Ensure that the OpenShift Data Foundation Operator is installed.

Procedure

  1. In the OpenShift Web Console, click OperatorsInstalled Operators to view all the installed operators.

    Ensure that the Project selected is openshift-storage.

  2. Click OpenShift Data Foundation operator and then click Create StorageSystem.
  3. In the Backing storage page, select the following:

    1. Select Multicloud Object Gateway for Deployment type.
    2. Select the Use an existing StorageClass option.
    3. Click Next.
  4. Optional: Select the Connect to an external key management service checkbox. This is optional for cluster-wide encryption.

    1. From the Key Management Service Provider drop-down list, either select Vault or Thales CipherTrust Manager (using KMIP). If you selected Vault, go to the next step. If you selected Thales CipherTrust Manager (using KMIP), go to step iii.
    2. Select an Authentication Method.

      Using Token authentication method
      • Enter a unique Connection Name, host Address of the Vault server ('https://<hostname or ip>'), Port number and Token.
      • Expand Advanced Settings to enter additional settings and certificate details based on your Vault configuration:

        • Enter the Key Value secret path in Backend Path that is dedicated and unique to OpenShift Data Foundation.
        • Optional: Enter TLS Server Name and Vault Enterprise Namespace.
        • Upload the respective PEM encoded certificate file to provide the CA Certificate, Client Certificate and Client Private Key .
        • Click Save and skip to step iv.
      Using Kubernetes authentication method
      • Enter a unique Vault Connection Name, host Address of the Vault server ('https://<hostname or ip>'), Port number and Role name.
      • Expand Advanced Settings to enter additional settings and certificate details based on your Vault configuration:

        • Enter the Key Value secret path in Backend Path that is dedicated and unique to OpenShift Data Foundation.
        • Optional: Enter TLS Server Name and Authentication Path if applicable.
        • Upload the respective PEM encoded certificate file to provide the CA Certificate, Client Certificate and Client Private Key .
        • Click Save and skip to step iv.
    3. To use Thales CipherTrust Manager (using KMIP) as the KMS provider, follow the steps below:

      1. Enter a unique Connection Name for the Key Management service within the project.
      2. In the Address and Port sections, enter the IP of Thales CipherTrust Manager and the port where the KMIP interface is enabled. For example:

        • Address: 123.34.3.2
        • Port: 5696
      3. Upload the Client Certificate, CA certificate, and Client Private Key.
      4. If StorageClass encryption is enabled, enter the Unique Identifier to be used for encryption and decryption generated above.
      5. The TLS Server field is optional and used when there is no DNS entry for the KMIP endpoint. For example, kmip_all_<port>.ciphertrustmanager.local.
    4. Select a Network.
    5. Click Next.
  5. In the Review and create page, review the configuration details:

    To modify any configuration settings, click Back.

  6. Click Create StorageSystem.

Verification steps

Verifying that the OpenShift Data Foundation cluster is healthy
  1. In the OpenShift Web Console, click StorageData Foundation.
  2. In the Status card of the Overview tab, click Storage System and then click the storage system link from the pop up that appears.

    1. In the Status card of the Object tab, verify that both Object Service and Data Resiliency have a green tick.
    2. In the Details card, verify that the MCG information is displayed.
Verifying the state of the pods
  1. Click WorkloadsPods from the OpenShift Web Console.
  2. Select openshift-storage from the Project drop-down list and verify that the following pods are in Running state.

    Note

    If the Show default projects option is disabled, use the toggle button to list all the default projects.

    ComponentCorresponding pods

    OpenShift Data Foundation Operator

    • ocs-operator-* (1 pod on any storage node)
    • ocs-metrics-exporter-* (1 pod on any storage node)
    • odf-operator-controller-manager-* (1 pod on any storage node)
    • odf-console-* (1 pod on any storage node)
    • csi-addons-controller-manager-* (1 pod on any storage node)

    Rook-ceph Operator

    rook-ceph-operator-*

    (1 pod on any storage node)

    Multicloud Object Gateway

    • noobaa-operator-* (1 pod on any storage node)
    • noobaa-core-* (1 pod on any storage node)
    • noobaa-db-pg-* (1 pod on any storage node)
    • noobaa-endpoint-* (1 pod on any storage node)

Chapter 4. Uninstalling OpenShift Data Foundation

4.1. Uninstalling OpenShift Data Foundation in Internal mode

To uninstall OpenShift Data Foundation in Internal mode, refer to the knowledge base article on Uninstalling OpenShift Data Foundation.

Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.