Search

Deploying OpenShift Data Foundation using IBM Z infrastructure

download PDF
Red Hat OpenShift Data Foundation 4.12

Instructions on deploying Red Hat OpenShift Data Foundation to use local storage on IBM Z infrastructure

Red Hat Storage Documentation Team

Abstract

Read this document for instructions about how to install Red Hat OpenShift Data Foundation to use local storage on IBM Z infrastructure.
Note
While this document refers only to IBM Z, all information in it also applies to LinuxONE.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. We are beginning with these four terms: master, slave, blacklist, and whitelist. Because of the enormity of this endeavor, these changes will be implemented gradually over several upcoming releases. For more details, see our CTO Chris Wright’s message.

Providing feedback on Red Hat documentation

We appreciate your input on our documentation. Do let us know how we can make it better.

To give feedback, create a Bugzilla ticket:

  1. Go to the Bugzilla website.
  2. In the Component section, choose documentation.
  3. Fill in the Description field with your suggestion for improvement. Include a link to the relevant part(s) of documentation.
  4. Click Submit Bug.

Preface

Red Hat OpenShift Data Foundation supports deployment on existing Red Hat OpenShift Container Platform (RHOCP) IBM System Z clusters in connected or disconnected environments along with out-of-the-box support for proxy environments.

Note

See Planning your deployment and Preparing to deploy OpenShift Data Foundation for more information about deployment requirements.

To deploy OpenShift Data Foundation, follow the appropriate deployment process for your environment:

Chapter 1. Preparing to deploy OpenShift Data Foundation

When you deploy OpenShift Data Foundation on OpenShift Container Platform using local storage devices, you can create internal cluster resources. This approach internally provisions base services and all applications can access additional storage classes.

Before you begin the deployment of Red Hat OpenShift Data Foundation using local storage, ensure that your resource requirements are met. See requirements for installing OpenShift Data Foundation using local storage devices.

On the external key management system (KMS),

After you have addressed the above, follow these steps in the order given:

1.1. Requirements for installing OpenShift Data Foundation using local storage devices

Node requirements

The cluster must consist of at least three OpenShift Container Platform worker nodes with locally attached-storage devices on each of them.

  • Each of the three selected nodes must have at least one raw block device available. OpenShift Data Foundation uses the one or more available raw block devices.
  • The devices you use must be empty, the disks must not include Physical Volumes (PVs), Volume Groups (VGs), or Logical Volumes (LVs) remaining on the disk.

For more information, see the Resource requirements section in the Planning guide.

1.2. Enabling cluster-wide encryption with KMS using the Token authentication method

You can enable the key value backend path and policy in the vault for token authentication.

Prerequisites

  • Administrator access to the vault.
  • A valid Red Hat OpenShift Data Foundation Advanced subscription. For more information, see the knowledgebase article on OpenShift Data Foundation subscriptions.
  • Carefully, select a unique path name as the backend path that follows the naming convention since you cannot change it later.

Procedure

  1. Enable the Key/Value (KV) backend path in the vault.

    For vault KV secret engine API, version 1:

    $ vault secrets enable -path=odf kv

    For vault KV secret engine API, version 2:

    $ vault secrets enable -path=odf kv-v2
  2. Create a policy to restrict the users to perform a write or delete operation on the secret:

    echo '
    path "odf/*" {
      capabilities = ["create", "read", "update", "delete", "list"]
    }
    path "sys/mounts" {
    capabilities = ["read"]
    }'| vault policy write odf -
  3. Create a token that matches the above policy:

    $ vault token create -policy=odf -format json

Chapter 2. Deploy OpenShift Data Foundation using local storage devices

Deploying OpenShift Data Foundation on OpenShift Container Platform using local storage devices provides you with the option to create internal cluster resources. Follow this deployment method to use local storage to back persistent volumes for your OpenShift Container Platform applications.

Use this section to deploy OpenShift Data Foundation on IBM Z infrastructure where OpenShift Container Platform is already installed.

2.1. Installing Red Hat OpenShift Data Foundation Operator

You can install Red Hat OpenShift Data Foundation Operator using the Red Hat OpenShift Container Platform Operator Hub.

Prerequisites

  • Access to an OpenShift Container Platform cluster using an account with cluster-admin and operator installation permissions.
  • You must have at least three worker nodes in the Red Hat OpenShift Container Platform cluster. Each node should include one disk and requires 3 disks (PVs). However, one PV remains eventually unused by default. This is an expected behavior.
  • For additional resource requirements, see the Planning your deployment guide.
Important
  • When you need to override the cluster-wide default node selector for OpenShift Data Foundation, you can use the following command to specify a blank node selector for the openshift-storage namespace (create openshift-storage namespace in this case):

    $ oc annotate namespace openshift-storage openshift.io/node-selector=
  • Taint a node as infra to ensure only Red Hat OpenShift Data Foundation resources are scheduled on that node. This helps you save on subscription costs. For more information, see the How to use dedicated worker nodes for Red Hat OpenShift Data Foundation section in the Managing and Allocating Storage Resources guide.

Procedure

  1. Log in to the OpenShift Web Console.
  2. Click Operators → OperatorHub.
  3. Scroll or type OpenShift Data Foundation into the Filter by keyword box to find the OpenShift Data Foundation Operator.
  4. Click Install.
  5. Set the following options on the Install Operator page:

    1. Update Channel as stable-4.12.
    2. Installation Mode as A specific namespace on the cluster.
    3. Installed Namespace as Operator recommended namespace openshift-storage. If Namespace openshift-storage does not exist, it is created during the operator installation.
    4. Select Approval Strategy as Automatic or Manual.

      If you select Automatic updates, then the Operator Lifecycle Manager (OLM) automatically upgrades the running instance of your Operator without any intervention.

      If you select Manual updates, then the OLM creates an update request. As a cluster administrator, you must then manually approve that update request to update the Operator to a newer version.

    5. Ensure that the Enable option is selected for the Console plugin.
    6. Click Install.

Verification steps

  • After the operator is successfully installed, a pop-up with a message, Web console update is available appears on the user interface. Click Refresh web console from this pop-up for the console changes to reflect.
  • In the Web Console:

    • Navigate to Installed Operators and verify that the OpenShift Data Foundation Operator shows a green tick indicating successful installation.
    • Navigate to Storage and verify if Data Foundation dashboard is available.

2.2. Installing Local Storage Operator

Install the Local Storage Operator from the Operator Hub before creating Red Hat OpenShift Data Foundation clusters on local storage devices.

Procedure

  1. Log in to the OpenShift Web Console.
  2. Click Operators → OperatorHub.
  3. Type local storage in the Filter by keyword​ box to find the Local Storage Operator from the list of operators, and click on it.
  4. Set the following options on the Install Operator page:

    1. Update channel as either 4.12 or stable.
    2. Installation mode as A specific namespace on the cluster.
    3. Installed Namespace as Operator recommended namespace openshift-local-storage.
    4. Update approval as Automatic.
  5. Click Install.

Verification steps

  • Verify that the Local Storage Operator shows a green tick indicating successful installation.

2.3. Finding available storage devices (optional)

This step is additional information and can be skipped as the disks are automatically discovered during storage cluster creation. Use this procedure to identify the device names for each of the three or more worker nodes that you have labeled with the OpenShift Data Foundation label cluster.ocs.openshift.io/openshift-storage='' before creating Persistent Volumes (PV) for IBM Z.

Procedure

  1. List and verify the name of the worker nodes with the OpenShift Data Foundation label.

    $ oc get nodes -l=cluster.ocs.openshift.io/openshift-storage=

    Example output:

    NAME          STATUS   ROLES    AGE     VERSION
    bmworker01    Ready    worker   6h45m   v1.16.2
    bmworker02    Ready    worker   6h45m   v1.16.2
    bmworker03    Ready    worker   6h45m   v1.16.2
  2. Log in to each worker node that is used for OpenShift Data Foundation resources and find the unique by-id device name for each available raw block device.

    $ oc debug node/<node name>

    Example output:

    $ oc debug node/bmworker01
    Starting pod/bmworker01-debug ...
    To use host binaries, run `chroot /host`
    Pod IP: 10.0.135.71
    If you don't see a command prompt, try pressing enter.
    sh-4.2# chroot /host
    sh-4.4# lsblk
    NAME                         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
    loop0                          7:0    0   500G  0 loop
    sda                            8:0    0   120G  0 disk
    |-sda1                         8:1    0   384M  0 part /boot
    `-sda4                         8:4    0 119.6G  0 part
    `-coreos-luks-root-nocrypt   253:0    0 119.6G  0 dm   /sysroot
    sdb                            8:16   0   500G  0 disk

    In this example, for bmworker01, the available local device is sdb.

  3. Identify the unique ID for each of the devices selected in Step 2.

    sh-4.4#ls -l /dev/disk/by-id/  | grep sdb
    lrwxrwxrwx. 1 root root  9 Feb  3 16:49 scsi-360050763808104bc2800000000000259 -> ../../sdb
    lrwxrwxrwx. 1 root root  9 Feb  3 16:49 scsi-SIBM_2145_00e020412f0aXX00 -> ../../sdb
    lrwxrwxrwx. 1 root root  9 Feb  3 16:49 scsi-0x60050763808104bc2800000000000259 -> ../../sdb

    In the above example, the ID for the local device sdb

    scsi-0x60050763808104bc2800000000000259
  4. Repeat the above step to identify the device ID for all the other nodes that have the storage devices to be used by OpenShift Data Foundation. See this Knowledge Base article for more details.

2.4. Creating OpenShift Data Foundation cluster on IBM Z

Use this procedure to create an OpenShift Data Foundation cluster on IBM Z.

Prerequisites

Procedure

  1. In the OpenShift Web Console, click Operators → Installed Operators to view all the installed operators.

    Ensure that the Project selected is openshift-storage.

  2. Click on the OpenShift Data Foundation operator and then click Create StorageSystem.
  3. In the Backing storage page, perform the following:

    1. Select the Create a new StorageClass using the local storage devices for Backing storage type option.
    2. Select Full Deployment for the Deployment type option.
    3. Click Next.

      Important

      You are prompted to install the Local Storage Operator if it is not already installed. Click Install, and follow the procedure as described in Installing Local Storage Operator.

  4. In the Create local volume set page, provide the following information:

    1. Enter a name for the LocalVolumeSet and the StorageClass.

      By default, the local volume set name appears for the storage class name. You can change the name.

    2. Choose one of the following:

      • Disks on all nodes

        Uses the available disks that match the selected filters on all the nodes.

      • Disks on selected nodes

        Uses the available disks that match the selected filters only on the selected nodes.

        Important
        • The flexible scaling feature is enabled only when the storage cluster that you created with three or more nodes are spread across fewer than the minimum requirement of three availability zones.

          For information about flexible scaling, see knowledgebase article on Scaling OpenShift Data Foundation cluster using YAML when flexible scaling is enabled.

        • Flexible scaling features get enabled at the time of deployment and can not be enabled or disabled later on.
        • If the nodes selected do not match the OpenShift Data Foundation cluster requirement of an aggregated 30 CPUs and 72 GiB of RAM, a minimal cluster is deployed.

          For minimum starting node requirements, see the Resource requirements section in the Planning guide.

    3. From the available list of Disk Type, select SSD/NVME.
    4. Expand the Advanced section and set the following options:

      Volume Mode

      Block is selected by default.

      Device Type

      Select one or more device type from the dropdown list.

      Disk Size

      Set a minimum size of 100GB for the device and maximum available size of the device that needs to be included.

      Maximum Disks Limit

      This indicates the maximum number of PVs that can be created on a node. If this field is left empty, then PVs are created for all the available disks on the matching nodes.

    5. Click Next.

      A pop-up to confirm the creation of LocalVolumeSet is displayed.

    6. Click Yes to continue.
  5. In the Capacity and nodes page, configure the following:

    1. Available raw capacity is populated with the capacity value based on all the attached disks associated with the storage class. This takes some time to show up. The Selected nodes list shows the nodes based on the storage class.
    2. You can check the box to select Taint nodes.
    3. Click Next.
  6. Optional: In the Security and network page, configure the following based on your requirement:

    1. To enable encryption, select Enable data encryption for block and file storage.
    2. Choose one or both of the following Encryption level:

      • Cluster-wide encryption

        Encrypts the entire cluster (block and file).

      • StorageClass encryption

        Creates encrypted persistent volume (block only) using encryption enabled storage class.

    3. Select Connect to an external key management service checkbox. This is optional for cluster-wide encryption.

      1. Key Management Service Provider is set to Vault by default.
      2. Enter Vault Service Name, host Address of Vault server ('https://<hostname or ip>''), Port number and Token.
      3. Expand Advanced Settings to enter additional settings and certificate details based on your Vault configuration:

        1. Enter the Key Value secret path in Backend Path that is dedicated and unique to OpenShift Data Foundation.
        2. Optional: Enter TLS Server Name and Vault Enterprise Namespace.
        3. Upload the respective PEM encoded certificate file to provide CA Certificate, Client Certificate and Client Private Key.
        4. Click Save.
    4. Select Default (SDN) as Multus is not yet supported on OpenShift Data Foundation on IBM Z infrastructure.
    5. Click Next.
  7. In the Review and create page::

    1. Review the configuration details. To modify any configuration settings, click Back to go back to the previous configuration page.
    2. Click Create StorageSystem.

Verification steps

  • To verify the final Status of the installed storage cluster:

    1. In the OpenShift Web Console, navigate to Installed OperatorsOpenShift Data FoundationStorage Systemocs-storagecluster-storagesystemResources.
    2. Verify that Status of StorageCluster is Ready and has a green tick mark next to it.
  • To verify if flexible scaling is enabled on your storage cluster, perform the following steps:

    1. In the OpenShift Web Console, navigate to Installed OperatorsOpenShift Data FoundationStorage Systemocs-storagecluster-storagesystemResourcesocs-storagecluster.
    2. In the YAML tab, search for the keys flexibleScaling in spec section and failureDomain in status section. If flexible scaling is true and failureDomain is set to host, flexible scaling feature is enabled.

      spec:
      flexibleScaling: true
      […]
      status:
      failureDomain: host
  • To verify that all components for OpenShift Data Foundation are successfully installed, see Verifying your OpenShift Data Foundation deployment.

Additional resources

  • To expand the capacity of the initial cluster, see the Scaling Storage guide.

Chapter 3. Verifying OpenShift Data Foundation deployment for Internal-attached devices mode

Use this section to verify that OpenShift Data Foundation is deployed correctly.

3.1. Verifying the state of the pods

Procedure

  1. Click Workloads → Pods from the OpenShift Web Console.
  2. Select openshift-storage from the Project drop-down list.

    Note

    If the Show default projects option is disabled, use the toggle button to list all the default projects.

    For more information on the expected number of pods for each component and how it varies depending on the number of nodes, see Table 3.1, “Pods corresponding to OpenShift Data Foundation cluster”.

  3. Set filter for Running and Completed pods to verify that the following pods are in Running and Completed state:

    Table 3.1. Pods corresponding to OpenShift Data Foundation cluster
    ComponentCorresponding pods

    OpenShift Data Foundation Operator

    • ocs-operator-* (1 pod on any storage node)
    • ocs-metrics-exporter-* (1 pod on any storage node)
    • odf-operator-controller-manager-* (1 pod on any storage node
    • csi-addons-controller-manager-* (1 pod on any storage node)
    • odf-console-* (1 pod on any storage node)

    Rook-ceph Operator

    rook-ceph-operator-*

    (1 pod on any storage node)

    Multicloud Object Gateway

    • noobaa-operator-* (1 pod on any storage node)
    • noobaa-core-* (1 pod on any storage node)
    • noobaa-db-pg-* (1 pod on any storage node)
    • noobaa-endpoint-* (1 pod on any storage node)

    MON

    rook-ceph-mon-*

    (3 pods distributed across storage nodes)

    MGR

    rook-ceph-mgr-*

    (1 pod on any storage node)

    MDS

    rook-ceph-mds-ocs-storagecluster-cephfilesystem-*

    (2 pods distributed across storage nodes)

    RGW

    rook-ceph-rgw-ocs-storagecluster-cephobjectstore-* (1 pod on any storage node)

    CSI

    • cephfs

      • csi-cephfsplugin-* (1 pod on each storage node)
      • csi-cephfsplugin-provisioner-* (2 pods distributed across storage nodes)
    • rbd

      • csi-rbdplugin-* (1 pod on each storage node)
      • csi-rbdplugin-provisioner-* (2 pods distributed across storage nodes)

    rook-ceph-crashcollector

    rook-ceph-crashcollector-*

    (1 pod on each storage node)

    OSD

    • rook-ceph-osd-* (1 pod for each device)
    • rook-ceph-osd-prepare-ocs-deviceset-* (1 pod for each device)

3.2. Verifying the OpenShift Data Foundation cluster is healthy

Procedure

  1. In the OpenShift Web Console, click StorageData Foundation.
  2. Click the Storage Systems tab and then click on ocs-storagecluster-storagesystem.
  3. In the Status card of Block and File dashboard under Overview tab, verify that both Storage Cluster and Data Resiliency has a green tick mark.
  4. In the Details card, verify that the cluster information is displayed.

For more information on the health of the OpenShift Data Foundation cluster using the Block and File dashboard, see Monitoring OpenShift Data Foundation.

3.3. Verifying the Multicloud Object Gateway is healthy

Procedure

  1. In the OpenShift Web Console, click StorageData Foundation.
  2. In the Status card of the Overview tab, click Storage System and then click the storage system link from the pop up that appears.

    1. In the Status card of the Object tab, verify that both Object Service and Data Resiliency have a green tick.
    2. In the Details card, verify that the MCG information is displayed.

For more information on the health of the OpenShift Data Foundation cluster using the object service dashboard, see link: Monitoring OpenShift Data Foundation.

3.4. Verifying that the specific storage classes exist

Procedure

  1. Click Storage → Storage Classes from the left pane of the OpenShift Web Console.
  2. Verify that the following storage classes are created with the OpenShift Data Foundation cluster creation:

    • ocs-storagecluster-ceph-rbd
    • ocs-storagecluster-cephfs
    • openshift-storage.noobaa.io
    • ocs-storagecluster-ceph-rgw

Chapter 4. Uninstalling OpenShift Data Foundation

4.1. Uninstalling OpenShift Data Foundation in Internal-attached devices mode

Use the steps in this section to uninstall OpenShift Data Foundation.

Uninstall Annotations

Annotations on the Storage Cluster are used to change the behavior of the uninstall process. To define the uninstall behavior, the following two annotations have been introduced in the storage cluster:

  • uninstall.ocs.openshift.io/cleanup-policy: delete
  • uninstall.ocs.openshift.io/mode: graceful

The following table provides information on the different values that can used with these annotations:

Table 4.1. uninstall.ocs.openshift.io uninstall annotations descriptions
AnnotationValueDefaultBehavior

cleanup-policy

delete

Yes

Rook cleans up the physical drives and the DataDirHostPath

cleanup-policy

retain

No

Rook does not clean up the physical drives and the DataDirHostPath

mode

graceful

Yes

Rook and NooBaa pauses the uninstall process until the administrator/user removes the Persistent Volume Claims (PVCs) and Object Bucket Claims (OBCs)

mode

forced

No

Rook and NooBaa proceeds with uninstall even if the PVCs/OBCs provisioned using Rook and NooBaa exist respectively

Edit the value of the annotation to change the cleanup policy or the uninstall mode.

$ oc -n openshift-storage annotate storagecluster ocs-storagecluster uninstall.ocs.openshift.io/cleanup-policy="retain" --overwrite
$ oc -n openshift-storage annotate storagecluster ocs-storagecluster uninstall.ocs.openshift.io/mode="forced" --overwrite

Expected output for both commands:

storagecluster.ocs.openshift.io/ocs-storagecluster annotated

Prerequisites

  • Ensure that the OpenShift Data Foundation cluster is in a healthy state. The uninstall process can fail when some of the pods are not terminated successfully due to insufficient resources or nodes. In case the cluster is in an unhealthy state, contact Red Hat Customer Support before uninstalling OpenShift Data Foundation.
  • Ensure that applications are not consuming persistent volume claims (PVCs) or object bucket claims (OBCs) using the storage classes provided by OpenShift Data Foundation.
  • If any custom resources (such as custom storage classes, cephblockpools) were created by the admin, they must be deleted by the admin after removing the resources which consumed them.

Procedure

  1. Delete the volume snapshots that are using OpenShift Data Foundation.

    1. List the volume snapshots from all the namespaces.

      $ oc get volumesnapshot --all-namespaces
    2. From the output of the previous command, identify and delete the volume snapshots that are using OpenShift Data Foundation.

      $ oc delete volumesnapshot <VOLUME-SNAPSHOT-NAME> -n <NAMESPACE>
      <VOLUME-SNAPSHOT-NAME>
      Is the name of the volume snapshot
      <NAMESPACE>
      Is the project namespace
  2. Delete PVCs and OBCs that are using OpenShift Data Foundation.

    In the default uninstall mode (graceful), the uninstaller waits till all the PVCs and OBCs that use OpenShift Data Foundation are deleted.

    If you want to delete the Storage Cluster without deleting the PVCs, you can set the uninstall mode annotation to forced and skip this step. Doing so results in orphan PVCs and OBCs in the system.

    1. Delete OpenShift Container Platform monitoring stack PVCs using OpenShift Data Foundation.

      See Removing monitoring stack from OpenShift Data Foundation

    2. Delete OpenShift Container Platform Registry PVCs using OpenShift Data Foundation.

      Removing OpenShift Container Platform registry from OpenShift Data Foundation

    3. Delete OpenShift Container Platform logging PVCs using OpenShift Data Foundation.

      Removing the cluster logging operator from OpenShift Data Foundation

    4. Delete the other PVCs and OBCs provisioned using OpenShift Data Foundation.

      • Given below is a sample script to identify the PVCs and OBCs provisioned using OpenShift Data Foundation. The script ignores the PVCs that are used internally by OpenShift Data Foundation.

        #!/bin/bash
        
        RBD_PROVISIONER="openshift-storage.rbd.csi.ceph.com"
        CEPHFS_PROVISIONER="openshift-storage.cephfs.csi.ceph.com"
        NOOBAA_PROVISIONER="openshift-storage.noobaa.io/obc"
        RGW_PROVISIONER="openshift-storage.ceph.rook.io/bucket"
        
        NOOBAA_DB_PVC="noobaa-db"
        NOOBAA_BACKINGSTORE_PVC="noobaa-default-backing-store-noobaa-pvc"
        
        # Find all the OCS StorageClasses
        OCS_STORAGECLASSES=$(oc get storageclasses | grep -e "$RBD_PROVISIONER" -e "$CEPHFS_PROVISIONER" -e "$NOOBAA_PROVISIONER" -e "$RGW_PROVISIONER" | awk '{print $1}')
        
        # List PVCs in each of the StorageClasses
        for SC in $OCS_STORAGECLASSES
        do
                echo "======================================================================"
                echo "$SC StorageClass PVCs and OBCs"
                echo "======================================================================"
                oc get pvc  --all-namespaces --no-headers 2>/dev/null | grep $SC | grep -v -e "$NOOBAA_DB_PVC" -e "$NOOBAA_BACKINGSTORE_PVC"
                oc get obc  --all-namespaces --no-headers 2>/dev/null | grep $SC
                echo
        done
        Note

        Omit RGW_PROVISIONER for cloud platforms.

      • Delete the OBCs.

        $ oc delete obc <obc-name> -n <project-name>
        <obc-name>
        Is the name of the OBC
        <project-name>
        Is the name of the project
      • Delete the PVCs.

        $ oc delete pvc <pvc-name> -n <project-name>
        <pvc-name>
        Is the name of the PVC
        <project-name>

        Is the name of the project

        Note

        Ensure that you have removed any custom backing stores, bucket classes, etc., created in the cluster.

  3. Delete the Storage System object and wait for the removal of the associated resources.

    $ oc delete -n openshift-storage storagesystem --all --wait=true
  4. Check the cleanup pods if the uninstall.ocs.openshift.io/cleanup-policy was set to delete(default) and ensure that their status is Completed.

    $ oc get pods -n openshift-storage | grep -i cleanup

    Example output:

    NAME                                READY   STATUS      RESTARTS   AGE
    cluster-cleanup-job-<xx>        	0/1     Completed   0          8m35s
    cluster-cleanup-job-<yy>     		0/1     Completed   0          8m35s
    cluster-cleanup-job-<zz>     		0/1     Completed   0          8m35s
  5. Confirm that the directory /var/lib/rook is now empty. This directory is empty only if the uninstall.ocs.openshift.io/cleanup-policy annotation was set to delete(default).

    $ for i in $(oc get node -l cluster.ocs.openshift.io/openshift-storage= -o jsonpath='{ .items[*].metadata.name }'); do oc debug node/${i} -- chroot /host  ls -l /var/lib/rook; done
  6. If encryption was enabled at the time of install, remove dm-crypt managed device-mapper mapping from the OSD devices on all the OpenShift Data Foundation nodes.

    1. Create a debug pod and chroot to the host on the storage node.

      $ oc debug node/<node-name>
      $ chroot /host
      <node-name>
      Is the name of the node
    2. Get Device names and make note of the OpenShift Data Foundation devices.

      $ dmsetup ls

      Example output:

      ocs-deviceset-0-data-0-57snx-block-dmcrypt (253:1)
    3. Remove the mapped device.

      $ cryptsetup luksClose --debug --verbose ocs-deviceset-0-data-0-57snx-block-dmcrypt
      Important

      If the above command gets stuck due to insufficient privileges, run the following commands:

      • Press CTRL+Z to exit the above command.
      • Find PID of the process which was stuck.

        $ ps -ef | grep crypt
      • Terminate the process using kill command.

        $ kill -9 <PID>
        <PID>
        Is the process ID
      • Verify that the device name is removed.

        $ dmsetup ls
  7. Delete the namespace and wait till the deletion is complete. You need to switch to another project if openshift-storage is the active project.

    For example:

    $ oc project default
    $ oc delete project openshift-storage --wait=true --timeout=5m

    The project is deleted if the following command returns a NotFound error.

    $ oc get project openshift-storage
    Note

    While uninstalling OpenShift Data Foundation, if namespace is not deleted completely and remains in Terminating state, perform the steps in Troubleshooting and deleting remaining resources during Uninstall to identify objects that are blocking the namespace from being terminated.

  8. Delete local storage operator configurations if you have deployed OpenShift Data Foundation using local storage devices. See Removing local storage operator configurations.
  9. Unlabel the storage nodes.

    $ oc label nodes  --all cluster.ocs.openshift.io/openshift-storage-
    $ oc label nodes  --all topology.rook.io/rack-
  10. Remove the OpenShift Data Foundation taint if the nodes were tainted.

    $ oc adm taint nodes --all node.ocs.openshift.io/storage-
  11. Confirm all the Persistent volumes (PVs) provisioned using OpenShift Data Foundation are deleted. If there is any PV left in the Released state, delete it.

    $ oc get pv
    $ oc delete pv <pv-name>
    <pv-name>
    Is the name of the PV
  12. Remove the CustomResourceDefinitions.

    $ oc delete crd backingstores.noobaa.io bucketclasses.noobaa.io cephblockpools.ceph.rook.io cephclusters.ceph.rook.io cephfilesystems.ceph.rook.io cephnfses.ceph.rook.io cephobjectstores.ceph.rook.io cephobjectstoreusers.ceph.rook.io noobaas.noobaa.io ocsinitializations.ocs.openshift.io storageclusters.ocs.openshift.io cephclients.ceph.rook.io cephobjectrealms.ceph.rook.io cephobjectzonegroups.ceph.rook.io cephobjectzones.ceph.rook.io cephrbdmirrors.ceph.rook.io storagesystems.odf.openshift.io --wait=true --timeout=5m
  13. To ensure that OpenShift Data Foundation is uninstalled completely, on the OpenShift Container Platform Web Console,

    1. Click Storage.
    2. Verify that OpenShift Data Foundation no longer appears under Storage.

4.1.1. Removing local storage operator configurations

Use the instructions in this section only if you have deployed OpenShift Data Foundation using local storage devices.

Note

For OpenShift Data Foundation deployments only using localvolume resources, go directly to step 8.

Procedure

  1. Identify the LocalVolumeSet and the corresponding StorageClassName being used by OpenShift Data Foundation.

    $ oc get localvolumesets.local.storage.openshift.io -n openshift-local-storage
  2. Set the variable SC to the StorageClass providing the LocalVolumeSet.

    $ export SC="<StorageClassName>"
  3. List and note the devices to be cleaned up later. Inorder to list the device ids of the disks, please follow the procedure mentioned here, See Find the available storage devices.

    Example output:

    /dev/disk/by-id/scsi-360050763808104bc28000000000000eb
    /dev/disk/by-id/scsi-360050763808104bc28000000000000ef
    /dev/disk/by-id/scsi-360050763808104bc28000000000000f3
  4. Delete the LocalVolumeSet.

    $ oc delete localvolumesets.local.storage.openshift.io <name-of-volumeset> -n openshift-local-storage
  5. Delete the local storage PVs for the given StorageClassName.

    $ oc get pv | grep $SC | awk '{print $1}'| xargs oc delete pv
  6. Delete the StorageClassName.

    $ oc delete sc $SC
  7. Delete the symlinks created by the LocalVolumeSet.

    [[ ! -z $SC ]] && for i in $(oc get node -l cluster.ocs.openshift.io/openshift-storage= -o jsonpath='{ .items[*].metadata.name }'); do oc debug node/${i} -- chroot /host rm -rfv /mnt/local-storage/${SC}/; done
  8. Delete LocalVolumeDiscovery.

    $ oc delete localvolumediscovery.local.storage.openshift.io/auto-discover-devices -n openshift-local-storage
  9. Remove the LocalVolume resources (if any).

    Use the following steps to remove the LocalVolume resources that were used to provision PVs in the current or previous OpenShift Data Foundation version. Also, ensure that these resources are not being used by other tenants on the cluster.

    For each of the local volumes, do the following:

    1. Identify the LocalVolume and the corresponding StorageClassName being used by OpenShift Data Foundation.

      $ oc get localvolume.local.storage.openshift.io -n openshift-local-storage
    2. Set the variable LV to the name of the LocalVolume and variable SC to the name of the StorageClass

      For example:

      $ LV=local-block
      $ SC=localblock
    3. List and note the devices to be cleaned up later.

      $ oc get localvolume -n openshift-local-storage $LV -o jsonpath='{ .spec.storageClassDevices[].devicePaths[] }{"\n"}'

      Example output:

      /dev/sdb
      /dev/sdc
      /dev/sdd
      /dev/sde
    4. Delete the local volume resource.

      $ oc delete localvolume -n openshift-local-storage --wait=true $LV
    5. Delete the remaining PVs and StorageClasses if they exist.

      $ oc delete pv -l storage.openshift.com/local-volume-owner-name=${LV} --wait --timeout=5m
      $ oc delete storageclass $SC --wait --timeout=5m
    6. Clean up the artifacts from the storage nodes for that resource.

      $ [[ ! -z $SC ]] && for i in $(oc get node -l cluster.ocs.openshift.io/openshift-storage= -o jsonpath='{ .items[*].metadata.name }'); do oc debug node/${i} -- chroot /host rm -rfv /mnt/local-storage/${SC}/; done

      Example output:

      Starting pod/node-xxx-debug ...
      To use host binaries, run `chroot /host`
      removed '/mnt/local-storage/localblock/nvme2n1'
      removed directory '/mnt/local-storage/localblock'
      
      Removing debug pod ...
      Starting pod/node-yyy-debug ...
      To use host binaries, run `chroot /host`
      removed '/mnt/local-storage/localblock/nvme2n1'
      removed directory '/mnt/local-storage/localblock'
      
      Removing debug pod ...
      Starting pod/node-zzz-debug ...
      To use host binaries, run `chroot /host`
      removed '/mnt/local-storage/localblock/nvme2n1'
      removed directory '/mnt/local-storage/localblock'
      
      Removing debug pod ...
  10. Wipe the disks for each of the local volumesets or local volumes listed in step 1 and 8 respectively so that they can be reused.

    1. List the storage nodes.

      oc get nodes -l cluster.ocs.openshift.io/openshift-storage=

      Example output:

      NAME      STATUS   ROLES    AGE     VERSION
      node-xxx  Ready    worker   4h45m  v1.18.3+6c42de8
      node-yyy  Ready    worker   4h46m  v1.18.3+6c42de8
      node-zzz  Ready    worker   4h45m  v1.18.3+6c42de8
    2. Obtain the node console and execute chroot /host command when the prompt appears.

      $ oc debug node/node-xxx
      Starting pod/node-xxx-debug …
      To use host binaries, run `chroot /host`
      Pod IP: w.x.y.z
      If you don't see a command prompt, try pressing enter.
      sh-4.2# chroot /host
    3. Store the disk paths in the DISKS variable within quotes. For the list of disk paths, see step 3 and step 8.c for local volumeset and local volume respectively.

      Example output:

      sh-4.4# DISKS="/dev/disk/by-id/scsi-360050763808104bc28000000000000eb /dev/disk/by-id/scsi-360050763808104bc28000000000000ef /dev/disk/by-id/scsi-360050763808104bc28000000000000f3 "
      or
      sh-4.2# DISKS="/dev/sdb /dev/sdc /dev/sdd /dev/sde ".
    4. Run sgdisk --zap-all on all the disks.

      sh-4.4# for disk in $DISKS; do sgdisk --zap-all $disk;done

      Example output:

      Creating new GPT entries.
      GPT data structures destroyed! You may now partition the disk using fdisk or
      other utilities.
      Creating new GPT entries.
      GPT data structures destroyed! You may now partition the disk using fdisk or
      other utilities.
      Creating new GPT entries.
      GPT data structures destroyed! You may now partition the disk using fdisk or
      other utilities.
      Creating new GPT entries.
      GPT data structures destroyed! You may now partition the disk using fdisk or
      other utilities.
    5. Exit the shell and repeat for the other nodes.

      sh-4.4# exit
      exit
      sh-4.2# exit
      exit
      Removing debug pod ...
  11. Delete the openshift-local-storage namespace and wait till the deletion is complete. You will need to switch to another project if the openshift-local-storage namespace is the active project.

    For example:

    $ oc project default
    $ oc delete project openshift-local-storage --wait=true --timeout=5m

    The project is deleted if the following command returns a NotFound error.

    $ oc get project openshift-local-storage

4.2. Removing monitoring stack from OpenShift Data Foundation

Use this section to clean up the monitoring stack from OpenShift Data Foundation.

The Persistent Volume Claims (PVCs) that are created as a part of configuring the monitoring stack are in the openshift-monitoring namespace.

Prerequisites

Procedure

  1. List the pods and PVCs that are currently running in the openshift-monitoring namespace.

    $ oc get pod,pvc -n openshift-monitoring

    Example output:

    NAME                           READY   STATUS    RESTARTS   AGE
    pod/alertmanager-main-0         3/3     Running   0          8d
    pod/alertmanager-main-1         3/3     Running   0          8d
    pod/alertmanager-main-2         3/3     Running   0          8d
    pod/cluster-monitoring-
    operator-84457656d-pkrxm        1/1     Running   0          8d
    pod/grafana-79ccf6689f-2ll28    2/2     Running   0          8d
    pod/kube-state-metrics-
    7d86fb966-rvd9w                 3/3     Running   0          8d
    pod/node-exporter-25894         2/2     Running   0          8d
    pod/node-exporter-4dsd7         2/2     Running   0          8d
    pod/node-exporter-6p4zc         2/2     Running   0          8d
    pod/node-exporter-jbjvg         2/2     Running   0          8d
    pod/node-exporter-jj4t5         2/2     Running   0          6d18h
    pod/node-exporter-k856s         2/2     Running   0          6d18h
    pod/node-exporter-rf8gn         2/2     Running   0          8d
    pod/node-exporter-rmb5m         2/2     Running   0          6d18h
    pod/node-exporter-zj7kx         2/2     Running   0          8d
    pod/openshift-state-metrics-
    59dbd4f654-4clng                3/3     Running   0          8d
    pod/prometheus-adapter-
    5df5865596-k8dzn                1/1     Running   0          7d23h
    pod/prometheus-adapter-
    5df5865596-n2gj9                1/1     Running   0          7d23h
    pod/prometheus-k8s-0            6/6     Running   1          8d
    pod/prometheus-k8s-1            6/6     Running   1          8d
    pod/prometheus-operator-
    55cfb858c9-c4zd9                1/1     Running   0          6d21h
    pod/telemeter-client-
    78fc8fc97d-2rgfp                3/3     Running   0          8d
    
    NAME                                                              STATUS   VOLUME                                     CAPACITY   ACCESS MODES   STORAGECLASS                  AGE
    persistentvolumeclaim/my-alertmanager-claim-alertmanager-main-0   Bound    pvc-0d519c4f-15a5-11ea-baa0-026d231574aa   40Gi       RWO            ocs-storagecluster-ceph-rbd   8d
    persistentvolumeclaim/my-alertmanager-claim-alertmanager-main-1   Bound    pvc-0d5a9825-15a5-11ea-baa0-026d231574aa   40Gi       RWO            ocs-storagecluster-ceph-rbd   8d
    persistentvolumeclaim/my-alertmanager-claim-alertmanager-main-2   Bound    pvc-0d6413dc-15a5-11ea-baa0-026d231574aa   40Gi       RWO            ocs-storagecluster-ceph-rbd   8d
    persistentvolumeclaim/my-prometheus-claim-prometheus-k8s-0        Bound    pvc-0b7c19b0-15a5-11ea-baa0-026d231574aa   40Gi       RWO            ocs-storagecluster-ceph-rbd   8d
    persistentvolumeclaim/my-prometheus-claim-prometheus-k8s-1        Bound    pvc-0b8aed3f-15a5-11ea-baa0-026d231574aa   40Gi       RWO            ocs-storagecluster-ceph-rbd   8d
  2. Edit the monitoring configmap.

    $ oc -n openshift-monitoring edit configmap cluster-monitoring-config

    Remove any config sections that reference the OpenShift Data Foundation storage classes as shown in the following example and save it.

    Before editing

    .
    .
    .
    apiVersion: v1
    data:
      config.yaml: |
        alertmanagerMain:
          volumeClaimTemplate:
            metadata:
              name: my-alertmanager-claim
            spec:
              resources:
                requests:
                  storage: 40Gi
              storageClassName: ocs-storagecluster-ceph-rbd
        prometheusK8s:
          volumeClaimTemplate:
            metadata:
              name: my-prometheus-claim
            spec:
              resources:
                requests:
                  storage: 40Gi
              storageClassName: ocs-storagecluster-ceph-rbd
    kind: ConfigMap
    metadata:
      creationTimestamp: "2019-12-02T07:47:29Z"
      name: cluster-monitoring-config
      namespace: openshift-monitoring
      resourceVersion: "22110"
      selfLink: /api/v1/namespaces/openshift-monitoring/configmaps/cluster-monitoring-config
      uid: fd6d988b-14d7-11ea-84ff-066035b9efa8
    .
    .
    .

    After editing

    .
    .
    .
    apiVersion: v1
    data:
      config.yaml: |
    kind: ConfigMap
    metadata:
      creationTimestamp: "2019-11-21T13:07:05Z"
      name: cluster-monitoring-config
      namespace: openshift-monitoring
      resourceVersion: "404352"
      selfLink: /api/v1/namespaces/openshift-monitoring/configmaps/cluster-monitoring-config
      uid: d12c796a-0c5f-11ea-9832-063cd735b81c
    .
    .
    .

    In this example, alertmanagerMain and prometheusK8s monitoring components are using the OpenShift Data Foundation PVCs.

  3. Delete the relevant PVCs. Make sure you delete all the PVCs that are consuming the storage classes.

    $ oc delete -n openshift-monitoring pvc <pvc-name> --wait=true --timeout=5m
    <pvc-name>
    Is the name of the PVC

4.3. Removing OpenShift Container Platform registry from OpenShift Data Foundation

Use this section to clean up the OpenShift Container Platform registry from OpenShift Data Foundation. If you want to configure an alternative storage, see Image registry.

The Persistent Volume Claims (PVCs) that are created as a part of configuring the OpenShift Container Platform registry are in the openshift-image-registry namespace.

Prerequisites

  • The image registry must have been configured to use an OpenShift Data Foundation PVC.

Procedure

  1. Edit the configs.imageregistry.operator.openshift.io object and remove the content in the storage section.

    $ oc edit configs.imageregistry.operator.openshift.io

    Before editing

    .
    .
    .
    
    storage:
        pvc:
            claim: registry-cephfs-rwx-pvc
    .
    .
    .

    After editing

    .
    .
    .
    storage:
      emptyDir: {}
    .
    .
    .

    In this example, the PVC is called registry-cephfs-rwx-pvc, which is now safe to delete.

  2. Delete the PVC.

    $ oc delete pvc <pvc-name> -n openshift-image-registry --wait=true --timeout=5m
    <pvc-name>
    Is the name of the PVC

4.4. Removing the cluster logging operator from OpenShift Data Foundation

Use this section to clean up the cluster logging operator from OpenShift Data Foundation.

The Persistent Volume Claims (PVCs) that are created as a part of configuring the cluster logging operator are in the openshift-logging namespace.

Prerequisites

  • The cluster logging instance should have been configured to use the OpenShift Data Foundation PVCs.

Procedure

  1. Remove the ClusterLogging instance in the namespace.

    $ oc delete clusterlogging instance -n openshift-logging --wait=true --timeout=5m

    The PVCs in the openshift-logging namespace are now safe to delete.

  2. Delete the PVCs.

    $ oc delete pvc <pvc-name> -n openshift-logging --wait=true --timeout=5m
    <pvc-name>
    Is the name of the PVC
Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.