Chapter 2. Deploy using dynamic storage devices

Procedure

1. Log in to the OpenShift Web Console.
2. Click Operators OperatorHub.
3. Scroll or type OpenShift Data Foundation into the Filter by keyword box to find the OpenShift Data Foundation Operator.
4. Click Install.

5. Set the following options on the Install Operator page:

   1. Update Channel as stable-4.12.
   2. Installation Mode as A specific namespace on the cluster.
   3. Installed Namespace as Operator recommended namespace openshift-storage. If Namespace openshift-storage does not exist, it is created during the operator installation.

   4. Select Approval Strategy as Automatic or Manual.

      If you select Automatic updates, then the Operator Lifecycle Manager (OLM) automatically upgrades the running instance of your Operator without any intervention.

      If you select Manual updates, then the OLM creates an update request. As a cluster administrator, you must then manually approve that update request to update the Operator to a newer version.

   5. Ensure that the Enable option is selected for the Console plugin.
   6. Click Install.

Procedure

1. Enable the Key/Value (KV) backend path in the vault.

   For vault KV secret engine API, version 1:

   $ vault secrets enable -path=odf kv

   For vault KV secret engine API, version 2:

   $ vault secrets enable -path=odf kv-v2

2. Create a policy to restrict the users to perform a write or delete operation on the secret:

   echo '
   path "odf/*" {
     capabilities = ["create", "read", "update", "delete", "list"]
   }
   path "sys/mounts" {
   capabilities = ["read"]
   }'| vault policy write odf -

3. Create a token that matches the above policy:

   $ vault token create -policy=odf -format json

Procedure

1. Create a service account:

   $ oc -n openshift-storage create serviceaccount <serviceaccount_name>

   where, <serviceaccount_name> specifies the name of the service account.

   For example:

   $ oc -n openshift-storage create serviceaccount odf-vault-auth

2. Create clusterrolebindings and clusterroles:

   $ oc -n openshift-storage create clusterrolebinding vault-tokenreview-binding --clusterrole=system:auth-delegator --serviceaccount=openshift-storage:_<serviceaccount_name>_

   For example:

   $ oc -n openshift-storage create clusterrolebinding vault-tokenreview-binding --clusterrole=system:auth-delegator --serviceaccount=openshift-storage:odf-vault-auth

3. Create a secret for the serviceaccount token and CA certificate.

   $ cat <<EOF | oc create -f -
   apiVersion: v1
   kind: Secret
   metadata:
     name: odf-vault-auth-token
     namespace: openshift-storage
     annotations:
       kubernetes.io/service-account.name: <serviceaccount_name>
   type: kubernetes.io/service-account-token
   data: {}
   EOF

   where, <serviceaccount_name> is the service account created in the earlier step.

4. Get the token and the CA certificate from the secret.

   $ SA_JWT_TOKEN=$(oc -n openshift-storage get secret odf-vault-auth-token -o jsonpath="{.data['token']}" | base64 --decode; echo)
   $ SA_CA_CRT=$(oc -n openshift-storage get secret odf-vault-auth-token -o jsonpath="{.data['ca\.crt']}" | base64 --decode; echo)

5. Retrieve the OCP cluster endpoint.

   $ OCP_HOST=$(oc config view --minify --flatten -o jsonpath="{.clusters[0].cluster.server}")

6. Fetch the service account issuer:

   $ oc proxy &
   $ proxy_pid=$!
   $ issuer="$( curl --silent http://127.0.0.1:8001/.well-known/openid-configuration | jq -r .issuer)"
   $ kill $proxy_pid

7. Use the information collected in the previous step to setup the Kubernetes authentication method in Vault:

   $ vault auth enable kubernetes

   $ vault write auth/kubernetes/config \
             token_reviewer_jwt="$SA_JWT_TOKEN" \
             kubernetes_host="$OCP_HOST" \
             kubernetes_ca_cert="$SA_CA_CRT" \
             issuer="$issuer"

   Important

   To configure the Kubernetes authentication method in Vault when the issuer is empty:

   $ vault write auth/kubernetes/config \
             token_reviewer_jwt="$SA_JWT_TOKEN" \
             kubernetes_host="$OCP_HOST" \
             kubernetes_ca_cert="$SA_CA_CRT"

8. Enable the Key/Value (KV) backend path in Vault.

   For Vault KV secret engine API, version 1:

   $ vault secrets enable -path=odf kv

   For Vault KV secret engine API, version 2:

   $ vault secrets enable -path=odf kv-v2

9. Create a policy to restrict the users to perform a write or delete operation on the secret:

   echo '
   path "odf/*" {
     capabilities = ["create", "read", "update", "delete", "list"]
   }
   path "sys/mounts" {
   capabilities = ["read"]
   }'| vault policy write odf -

10. Generate the roles:

    $ vault write auth/kubernetes/role/odf-rook-ceph-op \
            bound_service_account_names=rook-ceph-system,rook-ceph-osd,noobaa \
            bound_service_account_namespaces=openshift-storage \
            policies=odf \
            ttl=1440h

    The role odf-rook-ceph-op is later used while you configure the KMS connection details during the creation of the storage system.

    $ vault write auth/kubernetes/role/odf-rook-ceph-osd \
            bound_service_account_names=rook-ceph-osd \
            bound_service_account_namespaces=openshift-storage \
            policies=odf \
            ttl=1440h

Procedure

1. In the OpenShift Web Console, click Operators Installed Operators to view all the installed operators.

   Ensure that the Project selected is openshift-storage.

2. Click on the OpenShift Data Foundation operator, and then click Create StorageSystem.

3. In the Backing storage page, select the following:

   1. Select Full Deployment for the Deployment type option.
   2. Select the Use an existing StorageClass option.
   3. Click Next.

4. In the Capacity and nodes page, provide the necessary information:

   1. Select a value for Requested Capacity from the dropdown list. It is set to 2 TiB by default.

      Note

      Once you select the initial storage capacity, cluster expansion is performed only using the selected usable capacity (three times of raw storage).

   2. In the Select Nodes section, select at least three available nodes.
   3. Optional: Select the Taint nodes checkbox to dedicate the selected nodes for OpenShift Data Foundation.
   4. Click Next.

5. Optional: In the Security and network page, configure the following based on your requirements:

   1. To enable encryption, select Enable data encryption for block and file storage.

   2. Select either one or both the encryption levels:

      • Cluster-wide encryption

        Encrypts the entire cluster (block and file).

      • StorageClass encryption

        Creates encrypted persistent volume (block only) using encryption enabled storage class.

   3. Optional: Select the Connect to an external key management service checkbox. This is optional for cluster-wide encryption.

      1. From the Key Management Service Provider drop-down list, either select Vault or Thales CipherTrust Manager (using KMIP). If you selected Vault, go to the next step. If you selected Thales CipherTrust Manager (using KMIP), go to step iii.

      2. Select an Authentication Method.

         Using Token authentication method

         • Enter a unique Connection Name, host Address of the Vault server ('https://<hostname or ip>'), Port number and Token.

         • Expand Advanced Settings to enter additional settings and certificate details based on your Vault configuration:

           • Enter the Key Value secret path in Backend Path that is dedicated and unique to OpenShift Data Foundation.
           • Optional: Enter TLS Server Name and Vault Enterprise Namespace.
           • Upload the respective PEM encoded certificate file to provide the CA Certificate, Client Certificate and Client Private Key .
           • Click Save and skip to step iv.

         Using Kubernetes authentication method

         • Enter a unique Vault Connection Name, host Address of the Vault server ('https://<hostname or ip>'), Port number and Role name.

         • Expand Advanced Settings to enter additional settings and certificate details based on your Vault configuration:

           • Enter the Key Value secret path in Backend Path that is dedicated and unique to OpenShift Data Foundation.
           • Optional: Enter TLS Server Name and Authentication Path if applicable.
           • Upload the respective PEM encoded certificate file to provide the CA Certificate, Client Certificate and Client Private Key .
           • Click Save and skip to step iv.

      3. To use Thales CipherTrust Manager (using KMIP) as the KMS provider, follow the steps below:

         1. Enter a unique Connection Name for the Key Management service within the project.

         2. In the Address and Port sections, enter the IP of Thales CipherTrust Manager and the port where the KMIP interface is enabled. For example:

            • Address: 123.34.3.2
            • Port: 5696
         3. Upload the Client Certificate, CA certificate, and Client Private Key.
         4. If StorageClass encryption is enabled, enter the Unique Identifier to be used for encryption and decryption generated above.
         5. The TLS Server field is optional and used when there is no DNS entry for the KMIP endpoint. For example, kmip_all_<port>.ciphertrustmanager.local.
      4. Select a Network.
      5. Click Next.

6. In the Review and create page, review the configuration details.

   To modify any configuration settings, click Back.

7. Click Create StorageSystem.