Chapter 5. Rebooting the overcloud

Procedure

1. Log in to the node that you want to reboot.

2. Optional: If the node uses Pacemaker resources, stop the cluster:

   [heat-admin@overcloud-controller-0 ~]$ sudo pcs cluster stop

3. Reboot the node:

   [heat-admin@overcloud-controller-0 ~]$ sudo reboot

4. Wait until the node boots.

5. Check the services. For example:

   1. If the node uses Pacemaker services, check that the node has rejoined the cluster:

      [heat-admin@overcloud-controller-0 ~]$ sudo pcs status

   2. If the node uses Systemd services, check that all services are enabled:

      [heat-admin@overcloud-controller-0 ~]$ sudo systemctl status

   3. Repeat these steps for all Controller and composable nodes.

Procedure

1. Log in to a Ceph MON or Controller node and disable Ceph Storage cluster rebalancing temporarily:

   $ sudo ceph osd set noout
   $ sudo ceph osd set norebalance

2. Select the first Ceph Storage node to reboot and log into it.

3. Reboot the node:

   $ sudo reboot

4. Wait until the node boots.

5. Log in to a Ceph MON or Controller node and check the cluster status:

   $ sudo ceph -s

   Check that the pgmap reports all pgs as normal (active+clean).

6. Log out of the Ceph MON or Controller node, reboot the next Ceph Storage node, and check its status. Repeat this process until you have rebooted all Ceph storage nodes.

7. When complete, log into a Ceph MON or Controller node and enable cluster rebalancing again:

   $ sudo ceph osd unset noout
   $ sudo ceph osd unset norebalance

8. Perform a final status check to verify the cluster reports HEALTH_OK:

   $ sudo ceph status

Procedure

1. Log in to the undercloud as the stack user.

2. To identify the Compute node that you intend to reboot, list all Compute nodes:

   $ source ~/stackrc
   (undercloud) $ openstack server list --name compute

3. From the overcloud, select a Compute Node and disable it:

   $ source ~/overcloudrc
   (overcloud) $ openstack compute service list
   (overcloud) $ openstack compute service set <hostname> nova-compute --disable

4. List all instances on the Compute node:

   (overcloud) $ openstack server list --host <hostname> --all-projects

5. Migrate your instances. For more information on migration strategies, see Migrating virtual machines between Compute nodes.

6. Log into the Compute Node and reboot it:

   [heat-admin@overcloud-compute-0 ~]$ sudo reboot

7. Wait until the node boots.

8. Enable the Compute node:

   $ source ~/overcloudrc
   (overcloud) $ openstack compute service set <hostname> nova-compute --enable

9. Verify that the Compute node is enabled:

   (overcloud) $ openstack compute service list

Procedure

1. Log in to a Ceph MON or Controller node and disable Ceph Storage cluster rebalancing temporarily:

   $ sudo ceph osd set noout
   $ sudo ceph osd set norebalance

2. Log in to the undercloud as the stack user.

3. List all Compute nodes and their UUIDs:

   $ source ~/stackrc
   (undercloud) $ openstack server list --name compute

   Identify the UUID of the Compute node you aim to reboot.

4. From the undercloud, select a Compute node and disable it:

   $ source ~/overcloudrc
   (overcloud) $ openstack compute service list
   (overcloud) $ openstack compute service set [hostname] nova-compute --disable

5. List all instances on the Compute node:

   (overcloud) $ openstack server list --host [hostname] --all-projects

6. Use one of the following commands to migrate your instances:

   1. Migrate the instance to a specific host of your choice:

      (overcloud) $ openstack server migrate [instance-id] --live [target-host]--wait

   2. Let nova-scheduler automatically select the target host:

      (overcloud) $ nova live-migration [instance-id]

   3. Live migrate all instances at once:

      $ nova host-evacuate-live [hostname]

      Note

      The nova command might cause some deprecation warnings, which are safe to ignore.

7. Wait until the migration completes.

8. Confirm that the migration was successful:

   (overcloud) $ openstack server list --host [hostname] --all-projects

9. Continue migrating instances until none remain on the chosen Compute node.

10. Log in to a Ceph MON or a Controller node and check the cluster status:

    $ sudo ceph -s

    Check that the pgmap reports all pgs as normal (active+clean).

11. Reboot the Compute HCI node:

    $ sudo reboot

12. Wait until the node boots.

13. Enable the Compute node again:

    $ source ~/overcloudrc
    (overcloud) $ openstack compute service set [hostname] nova-compute --enable

14. Verify that the Compute node is enabled:

    (overcloud) $ openstack compute service list

15. Log out of the node, reboot the next node, and check its status. Repeat this process until you have rebooted all Ceph storage nodes.

16. When complete, log in to a Ceph MON or Controller node and enable cluster rebalancing again:

    $ sudo ceph osd unset noout
    $ sudo ceph osd unset norebalance

17. Perform a final status check to verify the cluster reports HEALTH_OK:

    $ sudo ceph status