Chapter 13. Configuring NVDIMM Compute nodes to provide persistent memory for instances

download PDF

A non-volatile dual in-line memory module (NVDIMM) is a technology that provides DRAM with persistent memory (PMEM). Standard computer memory loses its data after a loss of electrical power. The NVDIMM maintains its data even after a loss of electrical power. Instances that use PMEM can provide applications with the ability to load large contiguous segments of memory that persist the application data across power cycles. This is useful for high performance computing (HPC), which requests huge amounts of memory.

As a cloud administrator, you can make the PMEM available to instances as virtual PMEM (vPMEM) by creating and configuring PMEM namespaces on Compute nodes that have NVDIMM hardware. Cloud users can then create instances that request vPMEM when they need the instance content to be retained after it is shut down.

To enable your cloud users to create instances that use PMEM, you must complete the following procedures:

  1. Designate Compute nodes for PMEM.
  2. Configure the Compute nodes for PMEM that have the NVDIMM hardware.
  3. Deploy the overcloud.
  4. Create PMEM flavors for launching instances that have vPMEM.

If the NVDIMM hardware is limited, you can also configure a host aggregate to optimize scheduling on the PMEM Compute nodes. To schedule only instances that request vPMEM on the PMEM Compute nodes, create a host aggregate of the Compute nodes that have the NVDIMM hardware, and configure the Compute scheduler to place only PMEM instances on the host aggregate. For more information, see Creating and managing host aggregates and Filtering by isolating host aggregates.


  • Your Compute node has persistent memory hardware, such as Intel® Optane™ DC Persistent Memory.
  • You have configured backend NVDIMM regions on the PMEM hardware device to create PMEM namespaces. You can use the ipmctl tool provided by Intel to configure the PMEM hardware.

Limitations when using PMEM devices

  • You cannot cold migrate, live migrate, resize or suspend and resume instances that use vPMEM.
  • Only instances running RHEL8 can use vPMEM.
  • When rebuilding a vPMEM instance, the persistent memory namespaces are removed to restore the initial state of the instance.
  • When resizing an instance using a new flavor, the content of the original virtual persistent memory will not be copied to the new virtual persistent memory.
  • Virtual persistent memory hotplugging is not supported.
  • When creating a snapshot of a vPMEM instance, the virtual persistent images are not included.

13.1. Designating Compute nodes for PMEM

To designate Compute nodes for PMEM workloads, you must create a new role file to configure the PMEM role, and configure a new overcloud flavor and resource class for PMEM to use to tag the NVDIMM Compute nodes.


  1. Log in to the undercloud as the stack user.
  2. Source the stackrc file:

    [stack@director ~]$ source ~/stackrc
  3. Generate a new roles data file named roles_data_pmem.yaml that includes the Controller, Compute, and ComputePMEM roles:

    (undercloud)$ openstack overcloud roles \
     generate -o /home/stack/templates/roles_data_pmem.yaml \
     Compute:ComputePMEM Compute Controller
  4. Open roles_data_pmem.yaml and edit or add the following parameters and sections:

    Section/ParameterCurrent valueNew value

    Role comment

    Role: Compute

    Role: ComputePMEM

    Role name

    name: Compute

    name: ComputePMEM


    Basic Compute Node role

    PMEM Compute Node role







  5. Register the NVDIMM Compute nodes for the overcloud by adding them to your node definition template, node.json or node.yaml. For more information, see Registering nodes for the overcloud in the Director Installation and Usage guide.
  6. Inspect the node hardware:

    (undercloud)$ openstack overcloud node introspect --all-manageable --provide

    For more information, see Creating an inventory of the bare-metal node hardware in the Director Installation and Usage guide.

  7. Create the compute-pmem overcloud flavor for PMEM Compute nodes:

    (undercloud)$ openstack flavor create --id auto \
     --ram <ram_size_mb> --disk <disk_size_gb> \
     --vcpus <no_vcpus> compute-pmem
    • Replace <ram_size_mb> with the RAM of the bare metal node, in MB.
    • Replace <disk_size_gb> with the size of the disk on the bare metal node, in GB.
    • Replace <no_vcpus> with the number of CPUs on the bare metal node.


      These properties are not used for scheduling instances. However, the Compute scheduler does use the disk size to determine the root partition size.

  8. Tag each bare metal node that you want to designate for PMEM workloads with a custom PMEM resource class:

    (undercloud)$ openstack baremetal node set \
     --resource-class baremetal.PMEM <node>

    Replace <node> with the ID of the bare metal node.

  9. Associate the compute-pmem flavor with the custom PMEM resource class:

    (undercloud)$ openstack flavor set \
     --property resources:CUSTOM_BAREMETAL_PMEM=1 \

    To determine the name of a custom resource class that corresponds to a resource class of a Bare Metal service node, convert the resource class to uppercase, replace all punctuation with an underscore, and prefix with CUSTOM_.


    A flavor can request only one instance of a bare metal resource class.

  10. Set the following flavor properties to prevent the Compute scheduler from using the bare metal flavor properties to schedule instances:

    (undercloud)$ openstack flavor set \
     --property resources:VCPU=0 --property resources:MEMORY_MB=0 \
     --property resources:DISK_GB=0 compute-pmem
  11. Add the following parameters to the node-info.yaml file to specify the number of PMEM Compute nodes, and the flavor to use for the PMEM-designated Compute nodes:

      OvercloudComputePMEMFlavor: compute-pmem
      ComputePMEMCount: 3 #set to the no of NVDIMM devices you have
  12. To verify that the role was created, enter the following command:

    (undercloud)$ openstack overcloud profiles list

13.2. Configuring a PMEM Compute node

To enable your cloud users to create instances that use vPMEM, you must configure the Compute nodes that have the NVDIMM hardware.


  1. Create a new Compute environment file for configuring NVDIMM Compute nodes, for example, env_pmem.yaml.
  2. To partition the NVDIMM regions into PMEM namespaces that the instances can use, add the NovaPMEMNamespaces role-specific parameter to the PMEM role in your Compute environment file, and set the value using the following format:


    Use the following suffixes to represent the size:

    • "k" or "K" for KiB
    • "m" or "M" for MiB
    • "G" or "G" for GiB
    • "t" or "T" for TiB

      For example, the following configuration creates four namespaces, three of size 6 GiB, and one of size 100 GiB:

          NovaPMEMNamespaces: "6G:ns0,6G:ns1,6G:ns2,100G:ns3"
  3. To map the PMEM namespaces to labels that can be used in a flavor, add the NovaPMEMMappings role-specific parameter to the PMEM role in your Compute environment file, and set the value using the following format:


    For example, the following configuration maps the three 6 GiB namespaces to the label "6GB", and the 100 GiB namespace to the label "LARGE":

        NovaPMEMNamespaces: "6G:ns0,6G:ns1,6G:ns2,100G:ns3"
        NovaPMEMMappings: "6GB:ns0|ns1|ns2,LARGE:ns3"
  4. Save the updates to your Compute environment file.
  5. Add your Compute environment file to the stack with your other environment files and deploy the overcloud:

    (undercloud)$ openstack overcloud deploy --templates \
     -r /home/stack/templates/roles_data_pmem.yaml \
     -e /home/stack/templates/node-info.yaml \
     -e [your environment files] \
     -e /home/stack/templates/env_pmem.yaml
  6. Create and configure the flavors that your cloud users can use to launch instances that have vPMEM. The following example creates a flavor that requests a small PMEM device, 6GB, as mapped in Step 3:

    (overcloud)$ openstack flavor create --vcpus 1 --ram 512 --disk 2  \
     --property hw:pmem='6GB' small_pmem_flavor


  1. Create an instance using one of the PMEM flavors:

    (overcloud)$ openstack flavor list
    (overcloud)$ openstack server create --flavor small_pmem_flavor \
     --image rhel8 pmem_instance
  2. Log in to the instance as a cloud user. For more information, see Connecting to an instance.
  3. List all the disk devices attached to the instance:

    $ sudo fdisk -l /dev/pmem0

    The instance has vPMEM if one of the devices listed is NVDIMM.

Red Hat logoGithubRedditYoutubeTwitter


Try, buy, & sell


About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.