Search
SupportConsoleDevelopersStart a trialContact

Chapter 6. Non-Director Environments: Upgrading Individual OpenStack Services (Live Compute) in a High Availability Environment

download PDF

This chapter describes the steps you should follow to upgrade your cloud deployment by updating one service at a time with live compute in a High Availability (HA) environment. This scenario upgrades from Red Hat OpenStack Platform 7 to Red Hat OpenStack Platform 8 in environments that do not use the director.

A live Compute upgrade minimizes interruptions to your Compute service, with only a few minutes for the smaller services, and a longer migration interval for the workloads moving to newly-upgraded Compute hosts. Existing workloads can run indefinitely, and you do not need to wait for a database migration.

Important

Due to certain package dependencies, upgrading the packages for one OpenStack service might cause Python libraries to upgrade before other OpenStack services upgrade. This might cause certain services to fail prematurely. In this situation, continue upgrading the remaining services. All services should be operational upon completion of this scenario.

Note

This method may require additional hardware resources to bring up the Red Hat OpenStack Platform 8 Compute nodes.

Note

The procedures in this chapter follow the architectural naming convention followed by all Red Hat OpenStack Platform documentation. If you are unfamiliar with this convention, refer to the Architecture Guide available in the Red Hat OpenStack Platform Documentation Suite before proceeding.

6.1. Pre-Upgrade Tasks

On each node, change to the Red Hat OpenStack Platform 8 repository using the subscription-manager command. 

# subscription-manager repos --disable=rhel-7-server-openstack-7.0-rpms
# subscription-manager repos --enable=rhel-7-server-openstack-8-rpms

Upgrade the openstack-selinux package: 

# yum upgrade openstack-selinux

This is necessary to ensure that the upgraded services will run correctly on a system with SELinux enabled.

6.2. Upgrading MariaDB

Perform the follow steps on each host running MariaDB. Complete the steps on one host before starting the process on another host.

  1. Stop the service from running on the local node: 

    # pcs resource ban galera-master $(crm_node -n)

  2. Wait until pcs status shows that the service is no longer running on the local node. This may take a few minutes. The local node transitions to slave mode: 

    Master/Slave Set: galera-master [galera]
Masters: [ overcloud-controller-1 overcloud-controller-2 ]
Slaves: [ overcloud-controller-0 ]

    The node eventually transitions to stopped: 

    Master/Slave Set: galera-master [galera]
Masters: [ overcloud-controller-1 overcloud-controller-2 ]
Stopped: [ overcloud-controller-0 ]

  3. Upgrade the relevant packages. 

    # yum upgrade '*mariadb*' '*galera*'

  4. Allow Pacemaker to schedule the galera resource on the local node: 

    # pcs resource clear galera-master

  5. Wait until pcs status shows that the galera resource is running on the local node as a master. The pcs status command should provide output similar to the following: 

    Master/Slave Set: galera-master [galera]
Masters: [ overcloud-controller-0 overcloud-controller-1 overcloud-controller-2 ]

Perform this procedure on each node individually until the MariaDB cluster completes a full upgrade.

6.3. Upgrading MongoDB

This procedure upgrades MongoDB, which acts as the backend database for the OpenStack Telemetry service.

  1. Remove the mongod resource from Pacemaker’s control: 

    # pcs resource unmanage mongod-clone

  2. Stop the service on all Controller nodes. On each Controller node, run the following: 

    # systemctl stop mongod

  3. Upgrade the relevant packages: 

    #  yum upgrade 'mongodb*' 'python-pymongo*'

  4. Reload systemd to account for updated unit files: 

    # systemctl daemon-reload

  5. Restart the mongod service on your controllers by running, on each controller: 

    # systemctl start mongod

  6. Clean up the resource to Pacemaker control: 

    # pcs resource cleanup mongod-clone

  7. Return the resource to Pacemaker control: 

    # pcs resource manage mongod-clone
  8. Wait until the output of pcs status shows that the above resources are running.

6.4. Upgrading Identity service (keystone)

This procedure upgrades the packages for the Identity service on all Controller nodes simultaneously.

  1. Remove Identity service from Pacemaker’s control: 

    # pcs resource unmanage openstack-keystone-clone

  2. Stop the Identity service by running the following on each Controller node: 

    # systemctl stop openstack-keystone

  3. Upgrade the relevant packages: 

    # yum upgrade 'openstack-keystone*' 'python-keystone*'

  4. Reload systemd to account for updated unit files on each Controller node: 

    # systemctl daemon-reload

  5. Earlier versions of the installer may not have configured your system to automatically purge expired Keystone token, it is possible that your token table has a large number of expired entries. This can dramatically increase the time it takes to complete the database schema upgrade.

    Flush expired tokens from the database to alleviate the problem. Run the keystone-manage command before running the Identity database upgrade. 

    # keystone-manage token_flush

    This flushes expired tokens from the database. You can arrange to run this command periodically (e.g., daily) using cron.

  6. Update the Identity service database schema: 

    # openstack-db --service keystone --update

  7. Restart the service by running the following on each Controller node: 

    # systemctl start openstack-keystone

  8. Clean up the Identity service using Pacemaker: 

    # pcs resource cleanup openstack-keystone-clone

  9. Return the resource to Pacemaker control: 

    # pcs resource manage openstack-keystone-clone
  10. Wait until the output of pcs status shows that the above resources are running.

6.5. Upgrading Image service (glance)

This procedure upgrades the packages for the Image service on all Controller nodes simultaneously.

  1. Stop the Image service resources in Pacemaker: 

    # pcs resource disable openstack-glance-registry-clone
# pcs resource disable openstack-glance-api-clone
  2. Wait until the output of pcs status shows that both services have stopped running.

  3. Upgrade the relevant packages: 

    # yum upgrade 'openstack-glance*' 'python-glance*'

  4. Reload systemd to account for updated unit files: 

    # systemctl daemon-reload

  5. Update the Image service database schema: 

    # openstack-db --service glance --update

  6. Clean up the Image service using Pacemaker: 

    # pcs resource cleanup openstack-glance-api-clone
# pcs resource cleanup openstack-glance-registry-clone

  7. Restart Image service resources in Pacemaker: 

    # pcs resource enable openstack-glance-api-clone
# pcs resource enable openstack-glance-registry-clone
  8. Wait until the output of pcs status shows that the above resources are running.

6.6. Upgrading Block Storage service (cinder)

This procedure upgrades the packages for the Block Storage service on all Controller nodes simultaneously.

  1. Stop all Block Storage service resources in Pacemaker: 

    # pcs resource disable openstack-cinder-api-clone
# pcs resource disable openstack-cinder-scheduler-clone
# pcs resource disable openstack-cinder-volume
  2. Wait until the output of pcs status shows that the above services have stopped running.

  3. Upgrade the relevant packages: 

    # yum upgrade 'openstack-cinder*' 'python-cinder*'

  4. Reload systemd to account for updated unit files: 

    # systemctl daemon-reload

  5. Update the Block Storage service database schema: 

    # openstack-db --service cinder --update

  6. Clean up the Block Storage service using Pacemaker: 

    # pcs resource cleanup openstack-cinder-volume
# pcs resource cleanup openstack-cinder-scheduler-clone
# pcs resource cleanup openstack-cinder-api-clone

  7. Restart all Block Storage service resources in Pacemaker: 

    # pcs resource enable openstack-cinder-volume
# pcs resource enable openstack-cinder-scheduler-clone
# pcs resource enable openstack-cinder-api-clone
  8. Wait until the output of pcs status shows that the above resources are running.

6.7. Upgrading Orchestration (heat)

This procedure upgrades the packages for the Orchestration service on all Controller nodes simultaneously.

  1. Stop Orchestration resources in Pacemaker: 

    # pcs resource disable openstack-heat-api-clone
# pcs resource disable openstack-heat-api-cfn-clone
# pcs resource disable openstack-heat-api-cloudwatch-clone
# pcs resource disable openstack-heat-engine-clone
  2. Wait until the output of pcs status shows that the above services have stopped running.

  3. Upgrade the relevant packages: 

    # yum upgrade 'openstack-heat*' 'python-heat*'

  4. Reload systemd to account for updated unit files: 

    # systemctl daemon-reload

  5. Update the Orchestration database schema: 

    # openstack-db --service heat --update

  6. Clean up the Orchestration service using Pacemaker: 

    # pcs resource cleanup openstack-heat-clone
# pcs resource cleanup openstack-heat-api-cloudwatch-clone
# pcs resource cleanup openstack-heat-api-cfn-clone
# pcs resource cleanup openstack-heat-api-clone

  7. Restart Orchestration resources in Pacemaker: 

    # pcs resource enable openstack-heat-clone
# pcs resource enable openstack-heat-api-cloudwatch-clone
# pcs resource enable openstack-heat-api-cfn-clone
# pcs resource enable openstack-heat-api-clone
  8. Wait until the output of pcs status shows that the above resources are running.

6.8. Upgrading Telemetry (ceilometer)

This procedure upgrades the packages for the Telemetry service on all Controller nodes simultaneously.

  1. Stop all Telemetry resources in Pacemaker: 

    # pcs resource disable openstack-ceilometer-central
# pcs resource disable openstack-ceilometer-api-clone
# pcs resource disable openstack-ceilometer-alarm-evaluator-clone
# pcs resource disable openstack-ceilometer-collector-clone
# pcs resource disable openstack-ceilometer-notification-clone
# pcs resource disable openstack-ceilometer-alarm-notifier-clone
# pcs resource disable delay-clone
  2. Wait until the output of pcs status shows that the above services have stopped running.

  3. Upgrade the relevant packages: 

    # yum upgrade 'openstack-ceilometer*' 'python-ceilometer*'

  4. Reload systemd to account for updated unit files: 

    # systemctl daemon-reload

  5. Use the following command to update Telemetry database schema. 

    # ceilometer-dbsync

  6. Clean up the Telemetry service using Pacemaker: 

    # pcs resource cleanup delay-clone
# pcs resource cleanup openstack-ceilometer-alarm-notifier-clone
# pcs resource cleanup openstack-ceilometer-notification-clone
# pcs resource cleanup openstack-ceilometer-collector-clone
# pcs resource cleanup openstack-ceilometer-alarm-evaluator-clone
# pcs resource cleanup openstack-ceilometer-api-clone
# pcs resource cleanup openstack-ceilometer-central

  7. Restart all Telemetry resources in Pacemaker: 

    # pcs resource enable delay-clone
# pcs resource enable openstack-ceilometer-alarm-notifier-clone
# pcs resource enable openstack-ceilometer-notification-clone
# pcs resource enable openstack-ceilometer-collector-clone
# pcs resource enable openstack-ceilometer-alarm-evaluator-clone
# pcs resource enable openstack-ceilometer-api-clone
# pcs resource enable openstack-ceilometer-central
  8. Wait until the output of pcs status shows that the above resources are running.
Important

Previous versions of the Telemetry service used an value for the rpc_backend parameter that is now deprecated. Check the rpc_backend parameter in the /etc/ceilometer/ceilometer.conf file is set to the following: 

rpc_backend=rabbit

6.9. Upgrading the Compute service (nova) on Controller nodes

This procedure upgrades the packages for the Compute service on all Controller nodes simultaneously.

  1. Stop all Compute resources in Pacemaker: 

    # pcs resource disable openstack-nova-novncproxy-clone
# pcs resource disable openstack-nova-consoleauth-clone
# pcs resource disable openstack-nova-conductor-clone
# pcs resource disable openstack-nova-api-clone
# pcs resource disable openstack-nova-scheduler-clone
  2. Wait until the output of pcs status shows that the above services have stopped running.

  3. Upgrade the relevant packages: 

    # yum upgrade 'openstack-nova*' 'python-nova*'

  4. Reload systemd to account for updated unit files: 

    # systemctl daemon-reload

  5. Update the Compute database schema: 

    # openstack-db --service nova --update

  6. If you are performing a rolling upgrade of your compute hosts you need to set explicit API version limits to ensure compatibility between your Kilo and Liberty environments.

    Before starting Compute services on Controller or Compute nodes, set the compute option in the [upgrade_levels] section of nova.conf to the previous Red Hat OpenStack Platform version (kilo): 

    # crudini --set /etc/nova/nova.conf upgrade_levels compute kilo

    This ensures the Controller node can still communicate to the Compute nodes, which are still using the previous version.

    You will need to first unmanage the Compute resources by running pcs resource unmanage on one Controller node: 

    # pcs resource unmanage openstack-nova-novncproxy-clone
# pcs resource unmanage openstack-nova-consoleauth-clone
# pcs resource unmanage openstack-nova-conductor-clone
# pcs resource unmanage openstack-nova-api-clone
# pcs resource unmanage openstack-nova-scheduler-clone

    Restart all the services on all controllers: 

    # openstack-service restart nova

    You should return control to the Pacemaker after upgrading all of your compute hosts to OpenStack Liberty. 

    # pcs resource manage openstack-nova-scheduler-clone
# pcs resource manage openstack-nova-api-clone
# pcs resource manage openstack-nova-conductor-clone
# pcs resource manage openstack-nova-consoleauth-clone
# pcs resource manage openstack-nova-novncproxy-clone

  7. Clean up all Compute resources in Pacemaker: 

    # pcs resource cleanup openstack-nova-scheduler-clone
# pcs resource cleanup openstack-nova-api-clone
# pcs resource cleanup openstack-nova-conductor-clone
# pcs resource cleanup openstack-nova-consoleauth-clone
# pcs resource cleanup openstack-nova-novncproxy-clone

  8. Restart all Compute resources in Pacemaker: 

    # pcs resource enable openstack-nova-scheduler-clone
# pcs resource enable openstack-nova-api-clone
# pcs resource enable openstack-nova-conductor-clone
# pcs resource enable openstack-nova-consoleauth-clone
# pcs resource enable openstack-nova-novncproxy-clone
  9. Wait until the output of pcs status shows that the above resources are running.

6.10. Upgrading OpenStack Networking (neutron)

This procedure upgrades the packages for the Networking service on all Controller nodes simultaneously.

  1. Prevent Pacemaker from triggering the OpenStack Networking cleanup scripts: 

    # pcs resource unmanage neutron-ovs-cleanup-clone
# pcs resource unmanage neutron-netns-cleanup-clone

  2. Stop OpenStack Networking resources in Pacemaker: 

    # pcs resource disable neutron-server-clone
# pcs resource disable neutron-openvswitch-agent-clone
# pcs resource disable neutron-dhcp-agent-clone
# pcs resource disable neutron-l3-agent-clone
# pcs resource disable neutron-metadata-agent-clone

  3. Upgrade the relevant packages 

    # yum upgrade 'openstack-neutron*' 'python-neutron*'

  4. Install packages for the advanced Openstack Networking services enabled in the neutron.conf file. For example, to upgrade the openstack-neutron-vpnaas, openstack-neutron-fwaas and openstack-neutron-lbaas services: 

    # yum install openstack-neutron-vpnaas
# yum install openstack-neutron-fwaas
# yum install openstack-neutron-lbaas

    Installing these packages will create the corresponding configuration files.

  5. For the VPNaaS, LBaaS service entries in the neutron.conf file, copy the service_provider entries to the corresponding neutron-*aas.conf file located in /etc/neutron and comment these entries from the neutron.conf file.

    For the FWaaS service entry, the service_provider parameters should remain in the neutron.conf file.

  6. On every node that runs the LBaaS agents, install the openstack-neutron-lbaas package. 

    # yum install openstack-neutron-lbaas

  7. Reload systemd to account for updated unit files: 

    # systemctl daemon-reload

  8. Update the OpenStack Networking database schema: 

    # openstack-db --service neutron --update

  9. Clean up OpenStack Networking resources in Pacemaker: 

    # pcs resource cleanup neutron-metadata-agent-clone
# pcs resource cleanup neutron-l3-agent-clone
# pcs resource cleanup neutron-dhcp-agent-clone
# pcs resource cleanup neutron-openvswitch-agent-clone
# pcs resource cleanup neutron-server-clone

  10. Restart OpenStack Networking resources in Pacemaker: 

    # pcs resource enable neutron-metadata-agent-clone
# pcs resource enable neutron-l3-agent-clone
# pcs resource enable neutron-dhcp-agent-clone
# pcs resource enable neutron-openvswitch-agent-clone
# pcs resource enable neutron-server-clone

  11. Return the cleanup agents to Pacemaker control: 

    # pcs resource manage neutron-ovs-cleanup-clone
# pcs resource manage neutron-netns-cleanup-clone
  12. Wait until the output of pcs status shows that the above resources are running.

6.11. Upgrading Dashboard (horizon)

This procedure upgrades the packages for the Dashboard on all Controller nodes simultaneously.

  1. Stop the Dashboard resource in Pacemaker: 

    # pcs resource disable httpd-clone
  2. Wait until the output of pcs status shows that the service has stopped running.

  3. Upgrade the relevant packages: 

    # yum upgrade httpd 'openstack-dashboard*' 'python-django*'

  4. Reload systemd to account for updated unit files: 

    # systemctl daemon-reload

  5. Restart the web server on all your controllers to apply all changes: 

    # service httpd restart

  6. Clean up the Dashboard resource in Pacemaker: 

    #  pcs resource cleanup httpd-clone

  7. Restart the Dashboard resource in Pacemaker: 

    #  pcs resource enable httpd-clone
  8. Wait until the output of pcs status shows that the above resource is running.

6.12. Upgrading Compute (nova) Nodes

This procedure upgrades the packages for on a single Compute node. Run this procedure on each Compute node individually.

If you are performing a rolling upgrade of your compute hosts you need to set explicit API version limits to ensure compatibility between your Kilo and Liberty environments.

Before starting Compute services on Controller or Compute nodes, set the compute option in the [upgrade_levels] section of nova.conf to the previous Red Hat OpenStack Platform version (kilo): 

# crudini --set /etc/nova/nova.conf upgrade_levels compute kilo

This ensures the Controller node can still communicate to the Compute nodes, which are still using the previous version.

  1. Stop all OpenStack services on the host: 

    # openstack-service stop

  2. Upgrade all packages: 

    # yum upgrade

  3. Start all openstack services on the host: 

    # openstack-service start

  4. After you have upgraded all of your hosts, remove the API limits configured in the previous step. On all of your hosts: 

    # crudini --del /etc/nova/nova.conf upgrade_levels compute

  5. Restart all openstack services on the host: 

    # openstack-service restart

6.13. Post-Upgrade Tasks

After completing all of your individual service upgrades, you should perform a complete package upgrade on all nodes: 

# yum upgrade

This will ensure that all packages are up-to-date. You may want to schedule a restart of your OpenStack hosts at a future date in order to ensure that all running processes are using updated versions of the underlying binaries.

Review the resulting configuration files. The upgraded packages will have installed .rpmnew files appropriate to the Red Hat OpenStack Platform 8 version of the service.

New versions of OpenStack services may deprecate certain configuration options. You should also review your OpenStack logs for any deprecation warnings, because these may cause problems during a future upgrade. For more information on the new, updated and deprecated configuration options for each service , see Configuration Reference available from: Red Hat OpenStack Platform Documentation Suite.

Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.