SupportConsoleDevelopersStart a trialContact

Configuring Capsules with a Load Balancer

Red Hat Satellite 6.12

Distributing load between Capsule Servers

Red Hat Satellite Documentation Team

Abstract

This guide describes how to configure Red Hat Satellite to use a load balancer to distribute load between Capsule Servers.

Providing Feedback on Red Hat Documentation

We appreciate your input on our documentation. Please let us know how we could make it better.

You can submit feedback by filing a ticket in Bugzilla:

  1. Navigate to the Bugzilla website.
  2. In the Component field, use Documentation.
  3. In the Description field, enter your suggestion for improvement. Include a link to the relevant parts of the documentation.
  4. Click Submit Bug.

Chapter 1. Load Balancing Solution Architecture

You can configure Satellite Server to use a load balancer to distribute client requests and network load across multiple Capsule Servers. This results in an overall performance improvement on Capsule Servers.

This guide outlines how to prepare Satellite Server and Capsule Server for load balancing, and provides guidelines on how to configure a load balancer and register clients in a load-balanced setup.

A load-balanced setup consists of the following components:

  • Satellite Server
  • Two or more Capsule Servers
  • A load balancer
  • Multiple clients

Figure 1.1. Satellite Load Balancing Solution Architecture

Load Balancing Solution Architecture

In a load-balanced setup, nearly all Capsule functionality continues to work as expected when one Capsule Server is down, for planned or unplanned maintenance. Load balancer works with the following services and features:

  • Registration using subscription-manager
  • Content Management with yum repositories
  • Optional: Puppet
Note

In the load-balanced setup, a load balancer distributes load only for the services and features mentioned above. If other services, such as provisioning or virt-who, are running on the individual Capsules, you must access them directly through Capsules and not through the load balancer.

Managing Puppet Limitations

Puppet Certificate Authority (CA) management does not support certificate signing in a load-balanced setup. Puppet CA stores certificate information, such as the serial number counter and CRL, on the file system. Multiple writer processes that attempt to use the same data can corrupt it.

To manage this Puppet limitation, complete the following steps:

  1. Configure Puppet certificate signing on one Capsule Server, typically the first system where you configure Capsule Server for load balancing.
  2. Configure the clients to send CA requests to port 8141 on a load balancer.
  3. Configure a load balancer to redirect CA requests from port 8141 to port 8140 on the system where you configure Capsule Server to sign Puppet certificates.

Chapter 2. Load Balancing Considerations

Distributing load between several Capsule Servers prevents any one Capsule from becoming a single point of failure. Configuring Capsules to use a load balancer can provide resilience against planned and unplanned outages. This improves availability and responsiveness.

Consider the following guidelines when configuring load balancing:

  • If you use Puppet, Puppet certificate signing is assigned to the first Capsule that you configure. If the first Capsule is down, clients cannot obtain Puppet content.
  • This solution does not use Pacemaker or other similar HA tools to maintain one state across all Capsules. To troubleshoot issues, reproduce the issue on each Capsule, bypassing the load balancer.

Additional Maintenance Required for Load Balancing

Configuring Capsules to use a load balancer results in a more complex environment and requires additional maintenance.

The following additional steps are required for load balancing:

  • You must ensure that all Capsules have the same Content Views and synchronize all Capsules to the same Content View versions
  • You must upgrade each Capsule in sequence
  • You must backup each Capsule that you configure regularly

Upgrading Capsule Servers in a Load Balancing Configuration

To upgrade Capsule Servers from 6.11 to 6.12, complete the Upgrading Capsule Servers procedure in Upgrading and Updating Red Hat Satellite. There are no additional steps required for Capsule Servers in a load balancing configuration.

Chapter 3. Prerequisites for Configuring Capsule Servers for Load Balancing

To configure Capsule Servers for load balancing, complete the following procedures described in Installing Capsule Server. Satellite does not support configuring existing Capsule Servers for load balancing.

  1. Registering Capsule Server to Satellite Server
  2. Attaching the Satellite Infrastructure Subscription
  3. Configuring Repositories
  4. Synchronizing the System Clock With chronyd
  5. Installing Capsule Server Packages

Chapter 4. Configuring Capsule Servers for Load Balancing

This chapter outlines how to configure Capsule Servers for load balancing. Proceed to one of the following sections depending on your Satellite Server configuration:

Use different file names for the Katello certificates you create for each Capsule Server. For example, name the certificate archive file with Capsule Server FQDN.

4.1. Configuring Capsule Server with Default SSL Certificates for Load Balancing without Puppet

The following section describes how to configure Capsule Servers that use default SSL certificates for load balancing without Puppet. Complete this procedure on each Capsule Server that you want to configure for load balancing.

Procedure

  1. On Satellite Server, generate Katello certificates for Capsule Server: 

    # capsule-certs-generate \
--certs-tar "/root/capsule.example.com-certs.tar" \
--foreman-proxy-cname loadbalancer.example.com \
--foreman-proxy-fqdn capsule.example.com

    Retain a copy of the example satellite-installer command that is output by the capsule-certs-generate command for installing Capsule Server certificate.

  2. Copy the certificate archive file from Satellite Server to Capsule Server. 

    # scp /root/capsule.example.com-certs.tar root@capsule.example.com:/root/capsule.example.com-certs.tar

  3. Append the following options to the satellite-installer command that you obtain from the output of the capsule-certs-generate command: 

    --certs-cname "loadbalancer.example.com" \
--enable-foreman-proxy-plugin-remote-execution-script

  4. On Capsule Server, enter the satellite-installer command: 

    # satellite-installer --scenario capsule \
--certs-cname "loadbalancer.example.com" \
--certs-tar-file "capsule.example.com-certs.tar" \
--enable-foreman-proxy-plugin-remote-execution-script \
--foreman-proxy-foreman-base-url "https://satellite.example.com" \
--foreman-proxy-oauth-consumer-key "oauth key" \
--foreman-proxy-oauth-consumer-secret "oauth secret" \
--foreman-proxy-register-in-foreman "true" \
--foreman-proxy-trusted-hosts "satellite.example.com" \
--foreman-proxy-trusted-hosts "capsule.example.com"

4.2. Configuring Capsule Server with Default SSL Certificates for Load Balancing with Puppet

The following section describes how to configure Capsule Servers that use default SSL certificates for load balancing with Puppet.

If you use Puppet in your Satellite configuration, you must complete the following procedures:

  1. Section 4.2.1, “Configuring Capsule Server with Default SSL Certificates to Generate and Sign Puppet Certificates”
  2. Section 4.2.2, “Configuring Remaining Capsule Servers with Default SSL Certificates for Load Balancing”

4.2.1. Configuring Capsule Server with Default SSL Certificates to Generate and Sign Puppet Certificates

Complete this procedure only for the system where you want to configure Capsule Server to generate and sign Puppet certificates for all other Capsule Servers that you configure for load balancing.

Procedure

  1. On Satellite Server, generate Katello certificates for the system where you configure Capsule Server to generate and sign Puppet certificates: 

    # capsule-certs-generate \
--certs-tar "/root/capsule-ca.example.com-certs.tar" \
--foreman-proxy-cname loadbalancer.example.com \
--foreman-proxy-fqdn capsule-ca.example.com

    Retain a copy of the example satellite-installer command that is output by the capsule-certs-generate command for installing Capsule Server certificate.

  2. Copy the certificate archive file from Satellite Server to Capsule Server: 

    # scp /root/capsule-ca.example.com-certs.tar root@capsule-ca.example.com:capsule-ca.example.com-certs.tar

  3. Append the following options to the satellite-installer command that you obtain from the output of the capsule-certs-generate command: 

    --certs-cname "loadbalancer.example.com" \
--enable-foreman-proxy-plugin-remote-execution-script \
--foreman-proxy-puppetca "true" \
--puppet-ca-server "capsule-ca.example.com" \
--puppet-dns-alt-names "loadbalancer.example.com" \
--puppet-server-ca "true"

  4. On Capsule Server, enter the satellite-installer command: 

    # satellite-installer --scenario capsule \
--certs-cname "loadbalancer.example.com" \
--certs-tar-file "capsule-ca.example.com-certs.tar" \
--enable-foreman-proxy-plugin-remote-execution-script \
--enable-puppet \
--foreman-proxy-foreman-base-url "https://satellite.example.com" \
--foreman-proxy-oauth-consumer-key "oauth key" \
--foreman-proxy-oauth-consumer-secret "oauth secret" \
--foreman-proxy-puppetca "true" \
--foreman-proxy-register-in-foreman "true" \
--foreman-proxy-trusted-hosts "satellite.example.com" \
--foreman-proxy-trusted-hosts "capsule-ca.example.com" \
--puppet-ca-server "capsule-ca.example.com" \
--puppet-dns-alt-names "loadbalancer.example.com" \
--puppet-server true \
--puppet-server-ca "true" \
--puppet-server-foreman-url "https://satellite.example.com"

  5. On Capsule Server, stop the Puppet server: 

    # puppet resource service puppetserver ensure=stopped

  6. Generate Puppet certificates for all other Capsule Servers that you configure for load balancing, except the first system where you configure Puppet certificates signing: 

    # puppetserver ca generate \
--ca-client \
--certname capsule.example.com \
--subject-alt-names loadbalancer.example.com

    This command creates the following files on the system where you configure Capsule Server to sign Puppet certificates:

    • /etc/puppetlabs/puppet/ssl/certs/capsule.example.com.pem
    • /etc/puppetlabs/puppet/ssl/certs/ca.pem
    • /etc/puppetlabs/puppet/ssl/private_keys/capsule.example.com.pem
    • /etc/puppetlabs/puppet/ssl/public_keys/capsule.example.com.pem

  7. Resume the Puppet server: 

    # puppet resource service puppetserver ensure=running

4.2.2. Configuring Remaining Capsule Servers with Default SSL Certificates for Load Balancing

Complete this procedure on each Capsule Server excluding the system where you configure Capsule Server to sign Puppet certificates.

Procedure

  1. On Satellite Server, generate Katello certificates for Capsule Server: 

    # capsule-certs-generate \
--certs-tar "/root/capsule.example.com-certs.tar" \
--foreman-proxy-cname loadbalancer.example.com \
--foreman-proxy-fqdn capsule.example.com

    Retain a copy of the example satellite-installer command that is output by the capsule-certs-generate command for installing Capsule Server certificate.

  2. Copy the certificate archive file from Satellite Server to Capsule Server: 

    # scp /root/capsule.example.com-certs.tar root@capsule.example.com:/root/capsule.example.com-certs.tar

  3. On Capsule Server, install the puppetserver package: 

    # satellite-maintain packages install puppetserver

  4. On Capsule Server, create directories for puppet certificates: 

    # mkdir -p /etc/puppetlabs/puppet/ssl/certs/ \
/etc/puppetlabs/puppet/ssl/private_keys/ \
/etc/puppetlabs/puppet/ssl/public_keys/

  5. On Capsule Server, copy the Puppet certificates for this Capsule Server from the system where you configure Capsule Server to sign Puppet certificates: 

    # scp root@capsule-ca.example.com:/etc/puppetlabs/puppet/ssl/certs/capsule.example.com.pem /etc/puppetlabs/puppet/ssl/certs/capsule.example.com.pem
# scp root@capsule-ca.example.com:/etc/puppetlabs/puppet/ssl/certs/ca.pem /etc/puppetlabs/puppet/ssl/certs/ca.pem
# scp root@capsule-ca.example.com:/etc/puppetlabs/puppet/ssl/private_keys/capsule.example.com.pem /etc/puppetlabs/puppet/ssl/private_keys/capsule.example.com.pem
# scp root@capsule-ca.example.com:/etc/puppetlabs/puppet/ssl/public_keys/capsule.example.com.pem /etc/puppetlabs/puppet/ssl/public_keys/capsule.example.com.pem

  6. On Capsule Server, change the /etc/puppetlabs/puppet/ssl/ directory ownership to user puppet and group puppet: 

    # chown -R puppet:puppet /etc/puppetlabs/puppet/ssl/

  7. On Capsule Server, set the SELinux context for the /etc/puppetlabs/puppet/ssl/ directory: 

    # restorecon -Rv /etc/puppetlabs/puppet/ssl/

  8. Append the following options to the satellite-installer command that you obtain from the output of the capsule-certs-generate command: 

    --certs-cname "loadbalancer.example.com" \
--enable-foreman-proxy-plugin-remote-execution-script \
--foreman-proxy-puppetca "false" \
--puppet-ca-server "capsule-ca.example.com" \
--puppet-dns-alt-names "loadbalancer.example.com" \
--puppet-server-ca "false"

  9. On Capsule Server, enter the satellite-installer command: 

    # satellite-installer --scenario capsule \
--certs-cname "loadbalancer.example.com" \
--certs-tar-file "capsule.example.com-certs.tar" \
--enable-foreman-proxy-plugin-remote-execution-script \
--foreman-proxy-foreman-base-url "https://satellite.example.com" \
--foreman-proxy-oauth-consumer-key "oauth key" \
--foreman-proxy-oauth-consumer-secret "oauth secret" \
--foreman-proxy-puppetca "false" \
--foreman-proxy-register-in-foreman "true" \
--foreman-proxy-trusted-hosts "satellite.example.com" \
--foreman-proxy-trusted-hosts "capsule.example.com" \
--puppet-ca-server "capsule-ca.example.com" \
--puppet-dns-alt-names "loadbalancer.example.com" \
--puppet-server-ca "false" \
--puppet-server-foreman-url "https://satellite.example.com"

4.3. Configuring Capsule Server with Custom SSL Certificates for Load Balancing without Puppet

The following section describes how to configure Capsule Servers that use custom SSL certificates for load balancing without Puppet.

4.3.1. Creating Custom SSL Certificates for Capsule Server

This procedure outlines how to create a configuration file for the Certificate Signing Request and include the load balancer and Capsule Server as Subject Alternative Names (SAN). Complete this procedure on each Capsule Server that you want to configure for load balancing.

Procedure

  1. On Capsule Server, create a directory to contain all the source certificate files, accessible to only the root user: 

    # mkdir /root/capsule_cert
# cd /root/capsule_cert

  2. Create a private key with which to sign the Certificate Signing Request (CSR).

    Note that the private key must be unencrypted. If you use a password-protected private key, remove the private key password.

    If you already have a private key for this Capsule Server, skip this step. 

    # openssl genrsa -out /root/capsule_cert/capsule_cert_key.pem 4096

  3. Create the certificate request configuration file with the following content: 

    [ req ]
default_bits       = 4096
distinguished_name = req_distinguished_name
req_extensions     = req_ext
prompt = no

[ req_distinguished_name ]
countryName=2 Letter Country Code
stateOrProvinceName=State or Province Full Name
localityName=Locality Name
0.organizationName=Organization Name
organizationalUnitName=Capsule Organization Unit Name
commonName=capsule.example.com 1
emailAddress=Email Address

[ req_ext ]
#authorityKeyIdentifier=keyid,issuer
#basicConstraints=CA:FALSE
keyUsage = digitalSignature, nonRepudiation, keyEncipherment, dataEncipherment
subjectAltName = @alt_names

[alt_names] 2
DNS.1 = loadbalancer.example.com
DNS.2 = capsule.example.com
    1
    The certificate’s common name must match the FQDN of Capsule Server. Ensure to change this when running the command on each Capsule Server that you configure for load balancing. You can also set a wildcard value *. If you set a wildcard value, you must add the -t capsule option when you use the katello-certs-check command.
    2
    Under [alt_names], include the FQDN of the load balancer as DNS.1 and the FQDN of Capsule Server as DNS.2.

  4. Create a Certificate Signing Request (CSR) for the SAN certificate: 

    # openssl req -new \
-key /root/capsule_cert/capsule_cert_key.pem \ 1
-config SAN_config.cfg \ 2
-out /root/capsule_cert/capsule_cert_csr.pem 3
    1
    Capsule Server’s private key, used to sign the certificate
    2
    The certificate request configuration file
    3
    Certificate Signing Request file

  5. Send the certificate request to the Certificate Authority:

    When you submit the request, specify the lifespan of the certificate. The method for sending the certificate request varies, so consult the Certificate Authority for the preferred method. In response to the request, you can expect to receive a Certificate Authority bundle and a signed certificate, in separate files.

  6. Copy the Certificate Authority bundle and Capsule Server certificate file that you receive from the Certificate Authority, and Capsule Server private key to your Satellite Server.

  7. On Satellite Server, validate Capsule Server certificate input files: 

    # katello-certs-check \
-c /root/capsule_cert/capsule_cert.pem \ 1
-k /root/capsule_cert/capsule_cert_key.pem \ 2
-b /root/capsule_cert/ca_cert_bundle.pem 3
    1
    Capsule Server certificate file, provided by your Certificate Authority
    2
    Capsule Server’s private key that you used to sign the certificate
    3
    Certificate Authority bundle, provided by your Certificate Authority

    If you set the commonName= to a wildcard value *, you must add the -t capsule option to the katello-certs-check command.

    Retain a copy of the example capsule-certs-generate command that is output by the katello-certs-check command for creating the Certificate Archive File for this Capsule Server.

4.3.2. Configuring Capsule Server with Custom SSL Certificates for Load Balancing without Puppet

The following section describes how to configure Capsule Servers that use custom SSL certificates for load balancing without Puppet. Complete this procedure on each Capsule Server that you want to configure for load balancing.

Procedure

  1. Append the following option to the capsule-certs-generate command that you obtain from the output of the katello-certs-check command: 

    --foreman-proxy-cname loadbalancer.example.com

  2. On Satellite Server, enter the capsule-certs-generate command to generate Capsule certificates: 

    # capsule-certs-generate \
--certs-tar /root/capsule_cert/capsule.tar \
--foreman-proxy-cname loadbalancer.example.com \
--foreman-proxy-fqdn capsule.example.com \
--server-ca-cert /root/capsule_cert/ca_cert_bundle.pem \
--server-cert /root/capsule_cert/capsule.pem \
--server-key /root/capsule_cert/capsule.pem

    Retain a copy of the example satellite-installer command from the output for installing Capsule Server certificates.

  3. Copy the certificate archive file from Satellite Server to Capsule Server: 

    # scp /root/capsule.example.com-certs.tar root@capsule.example.com:capsule.example.com-certs.tar

  4. Append the following options to the satellite-installer command that you obtain from the output of the capsule-certs-generate command: 

    --certs-cname "loadbalancer.example.com" \
--enable-foreman-proxy-plugin-remote-execution-script

  5. On Capsule Server, enter the satellite-installer command: 

    # satellite-installer --scenario capsule \
--certs-cname "loadbalancer.example.com" \
--certs-tar-file "capsule.example.com-certs.tar" \
--enable-foreman-proxy-plugin-remote-execution-script \
--foreman-proxy-foreman-base-url "https://satellite.example.com" \
--foreman-proxy-oauth-consumer-key "oauth key" \
--foreman-proxy-oauth-consumer-secret "oauth secret" \
--foreman-proxy-register-in-foreman "true" \
--foreman-proxy-trusted-hosts "satellite.example.com" \
--foreman-proxy-trusted-hosts "capsule.example.com"

4.4. Configuring Capsule Server with Custom SSL Certificates for Load Balancing with Puppet

If you use Puppet in your Satellite configuration, then you must complete the following procedures:

  1. Section 4.4.2, “Configuring Capsule Server with Custom SSL Certificates to Generate and Sign Puppet Certificates”
  2. Section 4.4.3, “Configuring Remaining Capsule Servers with Custom SSL Certificates for Load Balancing”

4.4.1. Creating Custom SSL Certificates for Capsule Server

This procedure outlines how to create a configuration file for the Certificate Signing Request and include the load balancer and Capsule Server as Subject Alternative Names (SAN). Complete this procedure on each Capsule Server that you want to configure for load balancing.

Procedure

  1. On Capsule Server, create a directory to contain all the source certificate files, accessible to only the root user: 

    # mkdir /root/capsule_cert
# cd /root/capsule_cert

  2. Create a private key with which to sign the Certificate Signing Request (CSR).

    Note that the private key must be unencrypted. If you use a password-protected private key, remove the private key password.

    If you already have a private key for this Capsule Server, skip this step. 

    # openssl genrsa -out /root/capsule_cert/capsule_cert_key.pem 4096

  3. Create the certificate request configuration file with the following content: 

    [ req ]
default_bits       = 4096
distinguished_name = req_distinguished_name
req_extensions     = req_ext
prompt = no

[ req_distinguished_name ]
countryName=2 Letter Country Code
stateOrProvinceName=State or Province Full Name
localityName=Locality Name
0.organizationName=Organization Name
organizationalUnitName=Capsule Organization Unit Name
commonName=capsule.example.com 1
emailAddress=Email Address

[ req_ext ]
#authorityKeyIdentifier=keyid,issuer
#basicConstraints=CA:FALSE
keyUsage = digitalSignature, nonRepudiation, keyEncipherment, dataEncipherment
subjectAltName = @alt_names

[alt_names] 2
DNS.1 = loadbalancer.example.com
DNS.2 = capsule.example.com
    1
    The certificate’s common name must match the FQDN of Capsule Server. Ensure to change this when running the command on each Capsule Server that you configure for load balancing. You can also set a wildcard value *. If you set a wildcard value, you must add the -t capsule option when you use the katello-certs-check command.
    2
    Under [alt_names], include the FQDN of the load balancer as DNS.1 and the FQDN of Capsule Server as DNS.2.

  4. Create a Certificate Signing Request (CSR) for the SAN certificate: 

    # openssl req -new \
-key /root/capsule_cert/capsule_cert_key.pem \ 1
-config SAN_config.cfg \ 2
-out /root/capsule_cert/capsule_cert_csr.pem 3
    1
    Capsule Server’s private key, used to sign the certificate
    2
    The certificate request configuration file
    3
    Certificate Signing Request file

  5. Send the certificate request to the Certificate Authority:

    When you submit the request, specify the lifespan of the certificate. The method for sending the certificate request varies, so consult the Certificate Authority for the preferred method. In response to the request, you can expect to receive a Certificate Authority bundle and a signed certificate, in separate files.

  6. Copy the Certificate Authority bundle and Capsule Server certificate file that you receive from the Certificate Authority, and Capsule Server private key to your Satellite Server.

  7. On Satellite Server, validate Capsule Server certificate input files: 

    # katello-certs-check \
-c /root/capsule_cert/capsule_cert.pem \ 1
-k /root/capsule_cert/capsule_cert_key.pem \ 2
-b /root/capsule_cert/ca_cert_bundle.pem 3
    1
    Capsule Server certificate file, provided by your Certificate Authority
    2
    Capsule Server’s private key that you used to sign the certificate
    3
    Certificate Authority bundle, provided by your Certificate Authority

    If you set the commonName= to a wildcard value *, you must add the -t capsule option to the katello-certs-check command.

    Retain a copy of the example capsule-certs-generate command that is output by the katello-certs-check command for creating the Certificate Archive File for this Capsule Server.

4.4.2. Configuring Capsule Server with Custom SSL Certificates to Generate and Sign Puppet Certificates

Complete this procedure only for the system where you want to configure Capsule Server to generate Puppet certificates for all other Capsule Servers that you configure for load balancing.

Procedure

  1. Append the following option to the capsule-certs-generate command that you obtain from the output of the katello-certs-check command: 

    --foreman-proxy-cname loadbalancer.example.com

  2. On Satellite Server, enter the capsule-certs-generate command to generate Capsule certificates: 

    # capsule-certs-generate \
--certs-tar /root/capsule_cert/capsule-ca.tar \
--foreman-proxy-cname loadbalancer.example.com \
--foreman-proxy-fqdn capsule-ca.example.com \
--server-ca-cert /root/capsule_cert/ca_cert_bundle.pem \
--server-cert /root/capsule_cert/capsule-ca.pem \
--server-key /root/capsule_cert/capsule-ca.pem

    Retain a copy of the example satellite-installer command from the output for installing Capsule Server certificates.

  3. Copy the certificate archive file from Satellite Server to Capsule Server.

  4. Append the following options to the satellite-installer command that you obtain from the output of the capsule-certs-generate command: 

    --enable-foreman-proxy-plugin-remote-execution-script \
--foreman-proxy-puppetca "true" \
--puppet-ca-server "capsule-ca.example.com" \
--puppet-dns-alt-names "loadbalancer.example.com" \
--puppet-server-ca "true"

  5. On Capsule Server, enter the satellite-installer command: 

    # satellite-installer --scenario capsule \
--certs-cname "loadbalancer.example.com" \
--certs-tar-file "certs.tgz" \
--enable-foreman-proxy-plugin-remote-execution-script \
--enable-puppet \
--foreman-proxy-foreman-base-url "https://satellite.example.com" \
--foreman-proxy-oauth-consumer-key "oauth key" \
--foreman-proxy-oauth-consumer-secret "oauth secret" \
--foreman-proxy-puppetca "true" \
--foreman-proxy-register-in-foreman "true" \
--foreman-proxy-trusted-hosts "satellite.example.com" \
--foreman-proxy-trusted-hosts "capsule-ca.example.com" \
--puppet-ca-server "capsule-ca.example.com" \
--puppet-dns-alt-names "loadbalancer.example.com" \
--puppet-server true \
--puppet-server-ca "true" \
--puppet-server-foreman-url "https://satellite.example.com"

  6. On Capsule Server, generate Puppet certificates for all other Capsules that you configure for load balancing, except this first system where you configure Puppet certificates signing: 

    # puppet cert generate capsule.example.com \
--dns_alt_names=loadbalancer.example.com

    This command creates the following files on the Puppet certificate signing Capsule Server instance:

    • /etc/puppetlabs/puppet/ssl/certs/ca.pem
    • /etc/puppetlabs/puppet/ssl/certs/capsule.example.com.pem
    • /etc/puppetlabs/puppet/ssl/private_keys/capsule.example.com.pem
    • /etc/puppetlabs/puppet/ssl/public_keys/capsule.example.com.pem

4.4.3. Configuring Remaining Capsule Servers with Custom SSL Certificates for Load Balancing

Complete this procedure for each Capsule Server excluding the system where you configure Capsule Server to sign Puppet certificates.

Procedure

  1. Append the following option to the capsule-certs-generate command that you obtain from the output of the katello-certs-check command: 

    --foreman-proxy-cname loadbalancer.example.com

  2. On Satellite Server, enter the capsule-certs-generate command to generate Capsule certificates: 

    # capsule-certs-generate \
--certs-tar /root/capsule_cert/capsule.tar \
--foreman-proxy-cname loadbalancer.example.com \
--foreman-proxy-fqdn capsule.example.com \
--server-ca-cert /root/capsule_cert/ca_cert_bundle.pem \
--server-cert /root/capsule_cert/capsule.pem \
--server-key /root/capsule_cert/capsule.pem

    Retain a copy of the example satellite-installer command from the output for installing Capsule Server certificates.

  3. Copy the certificate archive file from Satellite Server to Capsule Server. 

    # scp /root/capsule.example.com-certs.tar root@capsule.example.com:capsule.example.com-certs.tar

  4. On Capsule Server, install the puppetserver package: 

    # satellite-maintain packages install puppetserver

  5. On Capsule Server, create directories for puppet certificates: 

    # mkdir -p /etc/puppetlabs/puppet/ssl/certs/ \
/etc/puppetlabs/puppet/ssl/private_keys/ \
/etc/puppetlabs/puppet/ssl/public_keys/

  6. On Capsule Server, copy the Puppet certificates for this Capsule Server from the system where you configure Capsule Server to sign Puppet certificates: 

    # scp root@capsule-ca.example.com:/etc/puppetlabs/puppet/ssl/certs/capsule.example.com.pem /etc/puppetlabs/puppet/ssl/certs/capsule.example.com.pem
# scp root@capsule-ca.example.com:/etc/puppetlabs/puppet/ssl/certs/ca.pem /etc/puppetlabs/puppet/ssl/certs/ca.pem
# scp root@capsule-ca.example.com:/etc/puppetlabs/puppet/ssl/private_keys/capsule.example.com.pem /etc/puppetlabs/puppet/ssl/private_keys/capsule.example.com.pem
# scp root@capsule-ca.example.com:/etc/puppetlabs/puppet/ssl/public_keys/capsule.example.com.pem /etc/puppetlabs/puppet/ssl/public_keys/capsule.example.com.pem

  7. On Capsule Server, change the /etc/puppetlabs/puppet/ssl/ directory ownership to user puppet and group puppet: 

    # chown -R puppet:puppet /etc/puppetlabs/puppet/ssl/

  8. On Capsule Server, set the SELinux context for the /etc/puppetlabs/puppet/ssl/ directory: 

    # restorecon -Rv /etc/puppetlabs/puppet/ssl/

  9. Append the following options to the satellite-installer command that you obtain from the output of the capsule-certs-generate command: 

    --certs-cname "loadbalancer.example.com" \
--enable-foreman-proxy-plugin-remote-execution-script \
--foreman-proxy-puppetca "false" \
--puppet-ca-server "capsule-ca.example.com" \
--puppet-dns-alt-names "loadbalancer.example.com" \
--puppet-server-ca "false"

  10. On Capsule Server, enter the satellite-installer command: 

    # satellite-installer --scenario capsule \
--certs-cname "loadbalancer.example.com" \
--certs-tar-file "capsule.example.com-certs.tar" \
--enable-foreman-proxy-plugin-remote-execution-script \
--foreman-proxy-foreman-base-url "https://satellite.example.com" \
--foreman-proxy-oauth-consumer-key "oauth key" \
--foreman-proxy-oauth-consumer-secret "oauth secret" \
--foreman-proxy-puppetca "false" \
--foreman-proxy-register-in-foreman "true" \
--foreman-proxy-trusted-hosts "satellite.example.com" \
--foreman-proxy-trusted-hosts "capsule.example.com" \
--puppet-ca-server "capsule-ca.example.com" \
--puppet-dns-alt-names "loadbalancer.example.com" \
--puppet-server-ca "false" \
--puppet-server-foreman-url "https://satellite.example.com"

Chapter 5. Installing the Load Balancer

The following example provides general guidance for configuring an HAProxy load balancer using Red Hat Enterprise Linux 8 server. However, you can install any suitable load balancing software solution that supports TCP forwarding.

Procedure

  1. Install HAProxy: 

    # dnf install haproxy

  2. Install the following package that includes the semanage tool: 

    # dnf install policycoreutils-python-utils

  3. Configure SELinux to allow HAProxy to bind any port: 

    # semanage boolean --modify --on haproxy_connect_any

  4. Configure the load balancer to balance the network load for the ports as described in Table 5.1, “Ports Configuration for the Load Balancer”. For example, to configure ports for HAProxy, edit the /etc/haproxy/haproxy.cfg file to correspond with the table. For more information, see Configuration example for haproxy.cfg for HAProxy load balancer with Satellite 6 in the Red Hat Knowledgebase.

    Table 5.1. Ports Configuration for the Load Balancer
    ServicePortModeBalance ModeDestination

    HTTP

    80

    TCP

    roundrobin

    port 80 on all Capsule Servers

    HTTPS and RHSM

    443

    TCP

    source

    port 443 on all Capsule Servers

    AMQP

    5647

    TCP

    roundrobin

    port 5647 on all Capsule Servers

    Puppet (Optional)

    8140

    TCP

    roundrobin

    port 8140 on all Capsule Servers

    PuppetCA (Optional)

    8141

    TCP

    roundrobin

    port 8140 only on the system where you configure Capsule Server to sign Puppet certificates

    SmartProxy (Optional for OpenScap)

    9090

    TCP

    roundrobin

    port 9090 on all Capsule Servers

  5. Configure the load balancer to disable SSL offloading and allow client-side SSL certificates to pass through to back end servers. This is required because communication from clients to Capsule Servers depends on client-side SSL certificates.

  6. Start and enable the HAProxy service: 

    # systemctl enable --now haproxy

Chapter 6. Verifying the Load Balancing Configuration

Use this procedure to verify the load balancing configuration for each Capsule Server.

Procedure

  1. Shut down the base operating system for your Capsule Server.
  2. Verify that content or subscription management features are available on clients registered to this Capsule. For example, enter the subscription-manager refresh command on a client.
  3. Restart the base operating system for your Capsule Server.

Chapter 7. Registering Clients to the Load Balancer

To balance the load of network traffic from clients, you must register the clients to the load balancer.

To register clients, proceed with one of the following procedures:

7.1. Registering Clients Using Host Registration

You can register hosts with Satellite using the host registration feature, the Satellite API, or Hammer CLI.

Procedure

  1. In the Satellite web UI, navigate to Hosts > Register Host.
  2. Click Generate to create the registration command.
  3. Click on the files icon to copy the command to your clipboard.
  4. Log in to the host you want register and run the previously generated command.

  5. Update subscription manager configuration for rhsm.baseurl and server.hostname: 

    # subscription-manager config \
--rhsm.baseurl=https://loadbalancer.example.com/pulp/content \
--server.hostname=loadbalancer.example.com
  6. Check the /etc/yum.repos.d/redhat.repo file and ensure that the appropriate repositories have been enabled.

CLI procedure

  1. Generate the host registration command using the Hammer CLI: 

    # hammer host-registration generate-command \
--activation-keys "My_Activation_Key"

    If your hosts do not trust the SSL certificate of Satellite Server, you can disable SSL validation by adding the --insecure flag to the registration command. 

    # hammer host-registration generate-command \
--activation-keys "My_Activation_Key" \
--insecure true
  2. Log in to the host you want register and run the previously generated command.

  3. Update subscription manager configuration for rhsm.baseurl and server.hostname: 

    # subscription-manager config \
--rhsm.baseurl=https://loadbalancer.example.com/pulp/content \
--server.hostname=loadbalancer.example.com
  4. Check the /etc/yum.repos.d/redhat.repo file and ensure that the appropriate repositories have been enabled.

API procedure

  1. Generate the host registration command using the Satellite API: 

    # curl -X POST https://satellite.example.com/api/registration_commands \
--user "My_User_Name" \
-H 'Content-Type: application/json' \
-d '{ "registration_command": { "activation_keys": ["My_Activation_Key_1, My_Activation_Key_2"] }}'

    If your hosts do not trust the SSL certificate of Satellite Server, you can disable SSL validation by adding the --insecure flag to the registration command. 

    # curl -X POST https://satellite.example.com/api/registration_commands \
--user "My_User_Name" \
-H 'Content-Type: application/json' \
-d '{ "registration_command": { "activation_keys": ["My_Activation_Key_1, My_Activation_Key_2"], "insecure": true }}'

    Use an activation key to simplify specifying the environments. For more information, see Managing Activation Keys in Managing Content.

    To enter a password as command line argument, use username:password syntax. Keep in mind this can save the password in the shell history.

    For more information about registration see Registering a Host to Red Hat Satellite in Managing Hosts.

  2. Log in to the host you want register and run the previously generated command.

  3. Update subscription manager configuration for rhsm.baseurl and server.hostname: 

    # subscription-manager config \
--rhsm.baseurl=https://loadbalancer.example.com/pulp/content \
--server.hostname=loadbalancer.example.com
  4. Check the /etc/yum.repos.d/redhat.repo file and ensure that the appropriate repositories have been enabled.

7.2. (Deprecated) Registering Clients Using the Bootstrap Script

To register clients, enter the following command on the client. You must complete the registration procedure for each client.

Prerequisite

Procedure

  • On Red Hat Enterprise Linux 8, enter the following command: 

    # /usr/libexec/platform-python bootstrap.py \
--activationkey="My_Activation_Key" \
--enablerepos=satellite-client-6-for-rhel-8-<arch>-rpms \ 1
--force \ 2
--hostgroup="My_Hostgroup" \
--location="My_Location" \
--login=admin \
--organization="My_Organization" \
--puppet-ca-port 8141 \ 3
--server loadbalancer.example.com
    1
    Replace <arch> with the client architecture, for example x86.
    2
    Include the --force option to register the client that has been previously registered to a standalone Capsule.
    3
    Include the --puppet-ca-port 8141 option if you use Puppet.

  • On Red Hat Enterprise Linux 7 or 6, enter the following command: 

    # python bootstrap.py --login=admin \
--activationkey="My_Activation_Key" \
--enablerepos=rhel-7-server-satellite-client-6-rpms \
--force \ 1
--hostgroup="My_Hostgroup" \
--location="My_Location" \
--organization="My_Organization" \
--puppet-ca-port 8141 \ 2
--server loadbalancer.example.com
    1
    Include the --force option to register the client that has been previously registered to a standalone Capsule.
    2
    Include the --puppet-ca-port 8141 option if you use Puppet.

The script prompts for the password corresponding to the Satellite user name you entered with the --login option.

7.3. (Deprecated) Registering Clients Manually Using katello-ca-consumer RPM

To register clients manually, complete the following procedure on each client that you want to register.

Procedure

  1. Remove the katello-ca-consumer package if it is installed: 

    # dnf remove 'katello-ca-consumer*'

  2. Install the katello-ca-consumer package from the load balancer: 

    # dnf install http://loadbalancer.example.com/pub/katello-ca-consumer-latest.noarch.rpm

  3. Register the client and include the --serverurl and --baseurl options: 

    # subscription-manager register \
--activationkey="My_Activation_Key" \
--baseurl=https://loadbalancer.example.com/pulp/content/ \
--org="My_Organization" \
--serverurl=https://loadbalancer.example.com/rhsm

Chapter 8. Propagating SCAP Content through the Load Balancer

If you use OpenSCAP to manage security compliance on your clients, you must configure the SCAP client to send ARF reports to the load balancer instead of Capsule. The configuration procedure depends on the method you have selected to deploy compliance policies.

8.1. Propagating SCAP Content using Ansible Deployment

Using this procedure, you can promote Security Content Automation Protocol (SCAP) content through the load balancer in the scope of the Ansible deployment method.

Prerequisite

Procedure

  1. In the Satellite web UI, navigate to Configure > Variables.
  2. Search for the foreman_scap_client_port variable and click its name.
  3. In the Default Behavior area, ensure that the Override checkbox is selected.
  4. In the Parameter Type list, ensure that integer is selected.
  5. In the Default Value field, enter 9090.
  6. In the Specify Matchers area, remove all matchers that override the default value.
  7. Click Submit.
  8. Search for the foreman_scap_client_server variable and click its name.
  9. In the Default Behavior area, ensure that the Override checkbox is selected.
  10. In the Parameter Type list, ensure that string is selected.
  11. In the Default Value field, enter the FQDN of your load balancer, such as loadbalancer.example.com.
  12. In the Specify Matchers area, remove all matchers that override the default value.
  13. Click Submit.

  14. Continue with deploying a compliance policy using Ansible. For more information, see:

Verification

  • On the client, verify that the /etc/foreman_scap_client/config.yaml file contains the following lines: 

    # Foreman proxy to which reports should be uploaded
:server: 'loadbalancer.example.com'
:port: 9090

8.2. Propagating SCAP Content using Puppet Deployment

Using this procedure, you can promote Security Content Automation Protocol (SCAP) content through the load balancer in the scope of the Puppet deployment method.

Prerequisite

Procedure

  1. In the Satellite web UI, navigate to Configure > Classes and click foreman_scap_client.
  2. Click the Smart Class Parameter tab.
  3. In the pane to the left of the Smart Class Parameter window, click port.
  4. In the Default Behavior area, select the Override checkbox.
  5. From the Key Type list, select integer.
  6. In the Default Value field, enter 9090.
  7. In the pane to the left of the Smart Class Parameter window, click server.
  8. In the Default Behavior area, select the Override checkbox.
  9. From the Key Type list, select string.
  10. In the Default Value field, enter the FQDN of your load balancer, such as loadbalancer.example.com.
  11. In the lower left of the Smart Class Parameter window, click Submit.

  12. Continue with deploying a compliance policy using Puppet. For more information, see:

Verification

  • On the client, verify that the /etc/foreman_scap_client/config.yaml file contains the following lines: 

    # Foreman proxy to which reports should be uploaded
:server: 'loadbalancer.example.com'
:port: 9090

Legal Notice

Copyright © 2024 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.
Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.