Upgrading disconnected Red Hat Satellite to 6.17

1. Ensure that your Satellite Servers and Capsule Servers have been upgraded to Satellite 6.16. For more information, see Upgrading connected Red Hat Satellite to 6.16 or Upgrading disconnected Red Hat Satellite to 6.16.

2. Upgrade your Satellite Server:

   1. Upgrade your Satellite Server to 6.17.
   2. Synchronize the new 6.17 repositories.

3. Upgrade your Capsule Servers:

   1. Upgrade all Capsule Servers to 6.17.

1. If you want to have several smaller outage windows instead of one larger window.
2. If Capsules in your organization are managed by several teams and are located in different locations.
3. If you use a load-balanced configuration, you can upgrade one load-balanced Capsule and keep other load-balanced Capsules at one version lower. This allows you to upgrade all Capsules one after another without any outage.

Upgrade disconnected Satellite Server

1. Stop all Satellite services:

   # satellite-maintain service stop

   Copy to Clipboard Toggle word wrap

2. Take a snapshot or create a backup:

   • On a virtual machine, take a snapshot.
   • On a physical machine, create a backup.

3. Start all Satellite services:

   # satellite-maintain service start

   Copy to Clipboard Toggle word wrap
4. Optional: If you made manual edits to DNS or DHCP configuration in the /etc/zones.conf or /etc/dhcp/dhcpd.conf files, back up the configuration files because the installer only supports one domain or subnet, and therefore restoring changes from these backups might be required.

5. Optional: If you made manual edits to DNS or DHCP configuration files and do not want to overwrite the changes, enter the following command:

   # satellite-installer --foreman-proxy-dns-managed false \
   --foreman-proxy-dhcp-managed false

   Copy to Clipboard Toggle word wrap
6. In the Satellite web UI, navigate to Hosts > Discovered hosts. If there are discovered hosts available, turn them off and then delete all entries under the Discovered hosts page. Select all other organizations in turn using the organization setting menu and repeat this action as required. Reboot these hosts after the upgrade has completed.

7. Remove old repositories:

   # rm /etc/yum.repos.d/*

   Copy to Clipboard Toggle word wrap
8. Obtain the latest ISO files by following the Downloading the Binary DVD Images procedure in Installing Satellite Server in a disconnected network environment.

9. Create directories to serve as a mount point, mount the ISO images, and configure the rhel8 repository by following the Configuring the base operating system with offline repositories procedure in Installing Satellite Server in a disconnected network environment.

   Do not install or update any packages at this stage.

10. Configure the Satellite 6.17 repository from the ISO file.

    1. Copy the ISO file’s repository data file for the Red Hat Satellite packages:

       # cp /media/sat6/Satellite/media.repo /etc/yum.repos.d/satellite.repo

       Copy to Clipboard Toggle word wrap

    2. Edit the /etc/yum.repos.d/satellite.repo file:

       # vi /etc/yum.repos.d/satellite.repo

       Copy to Clipboard Toggle word wrap

       1. Change the default InstallMedia repository name to Satellite-6.17:

          [Satellite-6.17]

          Copy to Clipboard Toggle word wrap

       2. Add the baseurl directive:

          baseurl=file:///media/sat6/Satellite

          Copy to Clipboard Toggle word wrap

11. Configure the Red Hat Satellite Maintenance repository from the ISO file.

    1. Copy the ISO file’s repository data file for Red Hat Satellite Maintenance packages:

       # cp /media/sat6/Maintenance/media.repo /etc/yum.repos.d/satellite-maintenance.repo

       Copy to Clipboard Toggle word wrap

    2. Edit the /etc/yum.repos.d/satellite-maintenance.repo file:

       # vi /etc/yum.repos.d/satellite-maintenance.repo

       Copy to Clipboard Toggle word wrap

       1. Change the default InstallMedia repository name to Satellite-Maintenance:

          [Satellite-Maintenance]

          Copy to Clipboard Toggle word wrap

    3. Add the baseurl directive:

       baseurl=file:///media/sat6/Maintenance/

       Copy to Clipboard Toggle word wrap

12. Optional: Because of the lengthy upgrade time, use a utility such as tmux to suspend and reattach a communication session. You can then check the upgrade progress without staying connected to the command shell continuously.

    If you lose connection to the command shell where the upgrade command is running, you can see the logs in /var/log/foreman-installer/satellite.log to check if the process completed successfully.

13. Upgrade satellite-maintain to its next version:

    # satellite-maintain self-upgrade --maintenance-repo-label Satellite-Maintenance

    Copy to Clipboard Toggle word wrap

14. Use the health check option to determine if the system is ready for upgrade. When prompted, enter the hammer admin user credentials to configure satellite-maintain with hammer credentials. These changes are applied to the /etc/foreman-maintain/foreman-maintain-hammer.yml file.

    # satellite-maintain upgrade check --whitelist="repositories-validate,repositories-setup"

    Copy to Clipboard Toggle word wrap

    Review the results and address any highlighted error conditions before performing the upgrade.

15. Perform the upgrade:

    # satellite-maintain upgrade run --whitelist="repositories-validate,repositories-setup"

    Copy to Clipboard Toggle word wrap

    If the script fails due to missing or outdated packages, you must download and install these separately. For more information, see Resolving Package Dependency Errors in Installing Satellite Server in a disconnected network environment.

16. If the satellite-maintain command told you to reboot, then reboot the system:

    # reboot

    Copy to Clipboard Toggle word wrap
17. Optional: If you made manual edits to DNS or DHCP configuration files, check and restore any changes required to the DNS and DHCP configuration files using the backups that you made.

18. If you make changes in the previous step, restart Satellite services:

    # satellite-maintain service restart

    Copy to Clipboard Toggle word wrap

19. If you have the OpenSCAP plugin installed, but do not have the default OpenSCAP content available, enter the following command.

    # foreman-rake foreman_openscap:bulk_upload:default

    Copy to Clipboard Toggle word wrap
20. In the Satellite web UI, navigate to Configure > Discovery Rules. Associate selected organizations and locations with discovery rules.

Procedure

1. In the Satellite web UI, navigate to Content > Red Hat Repositories.
2. Toggle the Recommended Repositories switch to the On position.

3. From the list of results, expand the following repositories and click the Enable icon to enable the repositories:

   • To upgrade Satellite clients, enable the Red Hat Satellite Client 6 repositories for all Red Hat Enterprise Linux versions that clients use.

   • If you have Capsule Servers, to upgrade them, enable the following repositories too:

     Red Hat Satellite Capsule 6.17 (for RHEL 9 x86_64) (RPMs)

     Red Hat Satellite Maintenance 6.17 (for RHEL 9 x86_64) (RPMs)

     Red Hat Enterprise Linux 9 (for x86_64 – BaseOS) (RPMs)

     Red Hat Enterprise Linux 9 (for x86_64 – AppStream) (RPMs)

   Note

   If the 6.17 repositories are not available, refresh the Red Hat Subscription Manifest. In the Satellite web UI, navigate to Content > Subscriptions, click Manage Manifest, then click Refresh.

4. In the Satellite web UI, navigate to Content > Sync Status.
5. Click the arrow next to the product to view the available repositories.
6. Select the repositories for 6.17. Note that Red Hat Satellite Client 6 does not have a 6.17 version. Choose Red Hat Satellite Client 6 instead.

7. Click Synchronize Now.

   Important

   If an error occurs when you try to synchronize a repository, refresh the manifest. If the problem persists, raise a support request. Do not delete the manifest from the Customer Portal or in the Satellite web UI; this removes all the entitlements of your content hosts.

8. If you use content views to control updates to the base operating system of Capsule Server, update those content views with new repositories, publish, and promote their updated versions. For more information, see Managing content views in Managing content.

Upgrading Capsule Servers

1. Create a backup.

   • On a virtual machine, take a snapshot.

   • On a physical machine, create a backup.

     For information on backups, see Backing Up Satellite Server and Capsule Server in Administering Red Hat Satellite.

2. Clean yum cache:

   # yum clean metadata

   Copy to Clipboard Toggle word wrap
3. Synchronize the satellite-capsule-6.17-for-rhel-9-x86_64-rpms repository in the Satellite Server.
4. Publish and promote a new version of the content view with which the Capsule is registered.

5. Optional: Because of the lengthy upgrade time, use a utility such as tmux to suspend and reattach a communication session. You can then check the upgrade progress without staying connected to the command shell continuously.

   If you lose connection to the command shell where the upgrade command is running, you can see the logged messages in the /var/log/foreman-installer/capsule.log file to check if the process completed successfully.

6. The rubygem-foreman_maintain is installed from the Satellite Maintenance repository or upgraded from the Satellite Maintenance repository if currently installed.

   Ensure that the Satellite Maintenance repository is enabled:

   # subscription-manager repos --enable \
   satellite-maintenance-6.17-for-rhel-9-x86_64-rpms

   Copy to Clipboard Toggle word wrap

   Ensure Capsule has access to satellite-maintenance-6.17-for-rhel-9-x86_64-rpms and execute:

   # satellite-maintain self-upgrade

   Copy to Clipboard Toggle word wrap

7. On Capsule Server, verify that the foreman_url setting points to the Satellite FQDN:

   # grep foreman_url /etc/foreman-proxy/settings.yml

   Copy to Clipboard Toggle word wrap

8. Use the health check option to determine if the system is ready for upgrade:

   # satellite-maintain upgrade check

   Copy to Clipboard Toggle word wrap

   Review the results and address any highlighted error conditions before performing the upgrade.

9. Perform the upgrade:

   # satellite-maintain upgrade run

   Copy to Clipboard Toggle word wrap

10. If the satellite-maintain command told you to reboot, then reboot the system:

    # reboot

    Copy to Clipboard Toggle word wrap
11. Optional: If you made manual edits to DNS or DHCP configuration files, check and restore any changes required to the DNS and DHCP configuration files using the backups made earlier.

Upgrading Capsule Servers using remote execution

1. Create a backup or take a snapshot.

   For more information on backups, see Backing Up Satellite Server and Capsule Server in Administering Red Hat Satellite.

2. In the Satellite web UI, navigate to Monitor > Jobs.
3. Click Run Job.
4. From the Job category list, select Maintenance Operations.
5. From the Job template list, select Capsule Upgrade Playbook.
6. In the Search Query field, enter the host name of the Capsule.
7. Ensure that Apply to 1 host is displayed in the Resolves to field.
8. In the target_version field, enter the target version of the Capsule.
9. In the whitelist_options field, enter the options.
10. Select the schedule for the job execution in Schedule.
11. In the Type of query section, click Static Query.

Procedure

1. Update permissions to prepare the postgresql-evr extension for removal:

   # runuser -l postgres -c \
   "psql -d foreman -c \"UPDATE pg_extension SET extowner = (SELECT oid FROM pg_authid WHERE rolname='foreman') WHERE extname='evr';\""

   Copy to Clipboard Toggle word wrap
2. Follow Section 2.2, “Upgrading a disconnected Satellite Server”.

Procedure

1. Create a backup of your existing external database.
2. Restore the backup on the new Red Hat Enterprise Linux 9 server.

3. Verify that Satellite can reach the new database:

   # PGPASSWORD='My_Foreman_Database_Password' psql -h postgres.example.com -p 5432 -U foreman -d foreman -c "SELECT 1 as ping"

   Copy to Clipboard Toggle word wrap

4. If your Satellite Server can reach the new database server by using the old name, no further changes are required. Otherwise, reconfigure Satellite to use the new name:

   # satellite-installer \
   --foreman-db-host newpostgres.example.com \
   --katello-candlepin-db-host newpostgres.example.com \
   --foreman-proxy-content-pulpcore-postgresql-host newpostgres.example.com

   Copy to Clipboard Toggle word wrap