5.2. Migrating to a Self-Hosted Environment using the RHEV-M Virtual Appliance

Procedure 5.2. Migrating to a Self-Hosted Environment using the RHEV-M Virtual Appliance

1. Initiating a Self-Hosted Engine Deployment

   Run the hosted-engine script. To escape the script at any time, use the CTRL+D keyboard combination to abort deployment. It is recommended to use the screen window manager to run the script to avoid losing the session in case of network or terminal disruption. If not already installed, install the screen package, which is available in the standard Red Hat Enterprise Linux repository.

   # yum install screen

   # screen

   # hosted-engine --deploy

   Note

   In the event of session timeout or connection disruption, run screen -d -r to recover the hosted-engine deployment session.

2. Configuring Storage

   Select the type of storage to use.

   During customization use CTRL-D to abort.
   Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]:

   • For NFS storage types, specify the full address, using either the FQDN or IP address, and path name of the shared storage domain.

     Please specify the full shared storage connection path to use (example: host:/path): storage.example.com:/hosted_engine/nfs

   • For iSCSI, specify the iSCSI portal IP address, port, user name and password, and select a target name from the auto-detected list. You can only select one iSCSI target during the deployment.

     Please specify the iSCSI portal IP address:           
     Please specify the iSCSI portal port [3260]:           
     Please specify the iSCSI portal user:           
     Please specify the iSCSI portal password:
     Please specify the target name (auto-detected values) [default]:

   • For Gluster storage, specify the full address, using either the FQDN or IP address, and path name of the shared storage domain.

     Important

     Only replica 3 Gluster storage is supported. Ensure the following configuration has been made:

     • In the /etc/glusterfs/glusterd.vol file on all three Gluster servers, set rpc-auth-allow-insecure to on.

       option rpc-auth-allow-insecure on

     • Configure the volume as follows:

       gluster volume set volume cluster.quorum-type auto
       gluster volume set volume network.ping-timeout 10
       gluster volume set volume auth.allow \*
       gluster volume set volume group virt
       gluster volume set volume storage.owner-uid 36
       gluster volume set volume storage.owner-gid 36
       gluster volume set volume server.allow-insecure on

     Please specify the full shared storage connection path to use (example: host:/path): storage.example.com:/hosted_engine/gluster_volume

   • For Fibre Channel, the host bus adapters must be configured and connected, and the hosted-engine script will auto-detect the LUNs available. The LUNs must not contain any existing data.

     The following luns have been found on the requested target:
     [1]     3514f0c5447600351       30GiB   XtremIO XtremApp
                             status: used, paths: 2 active
               
     [2]     3514f0c5447600352       30GiB   XtremIO XtremApp
                             status: used, paths: 2 active
     
     Please select the destination LUN (1, 2) [1]:

3. Configuring the Network

   The script detects possible network interface controllers (NICs) to use as a management bridge for the environment. It then checks your firewall configuration and offers to modify it for console (SPICE or VNC) access HostedEngine-VM. Provide a pingable gateway IP address, to be used by the ovirt-ha-agent to help determine a host's suitability for running HostedEngine-VM.

   Please indicate a nic to set rhevm bridge on: (eth1, eth0) [eth1]:
   iptables was detected on your computer, do you wish setup to configure it? (Yes, No)[Yes]: 
   Please indicate a pingable gateway IP address [X.X.X.X]:

4. Configuring the Virtual Machine

   The script creates a virtual machine to be configured as the Red Hat Enterprise Virtualization Manager, referred to in this procedure as HostedEngine-VM. Select disk for the boot device type, and the script will automatically detect the RHEV-M Appliances available. Select an appliance.

            Please specify the device to boot the VM from (choose disk for the oVirt engine appliance) (cdrom, disk, pxe) [disk]: 
   [ INFO ] Detecting available oVirt engine appliances
            The following appliance have been found on your system:
                  [1] - The RHEV-M Appliance image (OVA)
                  [2] - Directly select an OVA file
            Please select an appliance (1, 2) [1]:
   [ INFO ] Verifying its sha1sum
   [ INFO ] Checking OVF archive content (could take a few minutes depending on archive size)

   Specify Yes if you want cloud-init to take care of the initial configuration of the Manager virtual machine. Specify Generate for cloud-init to take care of tasks like setting the root password, configuring networking, and configuring the host name. Optionally, select Existing if you have an existing cloud-init script to take care of more sophisticated functions of cloud-init. Specify the FQDN for the Manager virtual machine. This must be the same FQDN provided for the BareMetal-Manager.

   Note

   For more information on cloud-init, see https://cloudinit.readthedocs.org/en/latest/.

   Would you like to use cloud-init to customize the appliance on the first boot (Yes, No)[Yes]? Yes
   Would you like to generate on-fly a cloud-init no-cloud ISO image or do you have an existing one(Generate, Existing)[Generate]? Generate
   Please provide the FQDN you would like to use for the engine appliance.
   Note: This will be the FQDN of the engine VM you are now going to launch.
   It should not point to the base host or to any other existing machine.
   Engine VM FQDN: (leave it empty to skip): manager.example.com

   You must answer No to the following question so that you can restore the BareMetal-Manager backup file on HostedEngine-VM before running engine-setup.

   Automatically execute engine-setup on the engine appliance on first boot (Yes, No)[Yes]? No

   Configure the Manager domain name, root password, networking, hardware, and console access details.

   Please provide the domain name you would like to use for the engine appliance.
   Engine VM domain: [example.com]
   Enter root password that will be used for the engine appliance (leave it empty to skip): p@ssw0rd
   Confirm appliance root password: p@ssw0rd
   How should the engine VM network be configured (DHCP, Static)[DHCP]? Static
   Please enter the IP address to be used for the engine VM: 192.168.x.x
   Please provide a comma-separated list (max3) of IP addresses of domain name servers for the engine VM
   Engine VM DNS (leave it empty to skip):
   Add lines for the appliance itself and for this host to /etc/hosts on the engine VM?
   Note: ensuring that this host could resolve the engine VM hostname is still up to you (Yes, No)[No] Yes
   The following CPU types are supported by this host:
       - model_SandyBridge: Intel SandyBridge Family
       - model_Westmere: Intel Westmere Family
       - model_Nehalem: Intel Nehalem Family
       - model_Penryn: Intel Penryn Family
       - model_Conroe: Intel Conroe Family
   Please specify the CPU type to be used by the VM [model_SandyBridge]: 
   Please specify the number of virtual CPUs for the VM [Defaults to appliance OVF value: 2]: 
   You may specify a unicast MAC address for the VM or accept a randomly generated default [00:16:3e:77:b2:a4]: 
   Please specify the memory size of the VM in MB [Defaults to appliance OVF value: 4096]:
   Please specify the console type you would like to use to connect to the VM (vnc, spice) [vnc]: vnc

5. Configuring the Self-Hosted Engine

   Specify the name for Host-HE1 to be identified in the Red Hat Enterprise Virtualization environment, and the password for the admin@internal user to access the Administration Portal. Finally, provide the name and TCP port number of the SMTP server, the email address used to send email notifications, and a comma-separated list of email addresses to receive these notifications.

   Enter the name which will be used to identify this host inside the Administrator Portal [hosted_engine_1]: Host-HE1
   Enter 'admin@internal' user password that will be used for accessing the Administrator Portal: 
   Confirm 'admin@internal' user password: 
   Please provide the name of the SMTP server through which we will send notifications [localhost]: 
   Please provide the TCP port number of the SMTP server [25]: 
   Please provide the email address from which notifications will be sent [root@localhost]: 
   Please provide a comma-separated list of email addresses which will get notifications [root@localhost]:

6. Configuration Preview

   Before proceeding, the hosted-engine script displays the configuration values you have entered, and prompts for confirmation to proceed with these values.

   Bridge interface                 : eth1
   Engine FQDN                      : manager.example.com
   Bridge name                      : ovirtmgmt
   Host address                     : host.example.com
   SSH daemon port                  : 22
   Firewall manager                 : iptables
   Gateway address                  : X.X.X.X
   Host name for web application    : Host-HE1
   Host ID                          : 1
   Image size GB                    : 50
   Storage connection               : storage.example.com:/hosted_engine/nfs
   Console type                     : vnc
   Memory size MB                   : 4096
   MAC address                      : 00:16:3e:77:b2:a4
   Boot type                        : pxe
   Number of CPUs                   : 2
   CPU Type                         : model_SandyBridge
   
   Please confirm installation settings (Yes, No)[Yes]:

7. Creating HostedEngine-VM

   The script creates the virtual machine to be configured as HostedEngine-VM and provides connection details. You must manually run engine-setup after restoring the backup file on HostedEngine-VM before the hosted-engine script can proceed on Host-HE1.

   [ INFO  ] Stage: Transaction setup
   ...
   [ INFO  ] Creating VM
             You can now connect to the VM with the following command:
                     /bin/remote-viewer vnc://localhost:5900
             Use temporary password "3463VnKn" to connect to vnc console.
             Please note that in order to use remote-viewer you need to be able to run graphical applications.
             This means that if you are using ssh you have to supply the -Y flag (enables trusted X11 forwarding).
             Otherwise you can run the command from a terminal in your preferred desktop environment.
             If you cannot run graphical applications you can connect to the graphic console from another host or connect to the serial console using the following command:
             socat UNIX-CONNECT:/var/run/ovirt-vmconsole-console/8f74b589-8c6f-4a32-9adf-6e615b69de07.sock,user=ovirt-vmconsole STDIO,raw,echo=0,escape=1
             Please ensure that your Guest OS is properly configured to support serial console according to your distro documentation.
             Follow http://www.ovirt.org/Serial_Console_Setup#I_need_to_access_the_console_the_old_way for more info.
             If you need to reboot the VM you will need to start it manually using the command:
             hosted-engine --vm-start
             You can then set a temporary password using the command:
             hosted-engine --add-console-password
             Please install and setup the engine in the VM.
             You may also be interested in subscribing to "agent" RHN/Satellite channel and installing rhevm-guest-agent-common package in the VM.
           
           
             The VM has been rebooted.
             To continue please install oVirt-Engine in the VM
             (Follow http://www.ovirt.org/Quick_Start_Guide for more info).
           
             Make a selection from the options below:
             (1) Continue setup - oVirt-Engine installation is ready and ovirt-engine service is up
             (2) Abort setup
             (3) Power off and restart the VM
             (4) Destroy VM and abort setup
           
             (1, 2, 3, 4)[1]:

   Connect to the virtual machine using the VNC protocol with the following command. Replace FQDN with the fully qualified domain name or the IP address of the self-hosted engine host.

   # /bin/remote-viewer vnc://FQDN:5900

8. Enabling SSH on HostedEngine-VM

   SSH password authentication is not enabled by default on the RHEV-M Virtual Appliance. Connect to HostedEngine-VM via VNC and enable SSH password authentication so that you can access the virtual machine via SSH later to restore the BareMetal-Manager backup file and configure the new Manager. Verify that the sshd service is running. Edit /etc/ssh/sshd_config and change the following two options to yes:

   [...]
   PermitRootLogin yes       
   [...]
   PasswordAuthentication yes

   Restart the sshd service for the changes to take effect.

   # service sshd restart

9. Disabling BareMetal-Manager

   Connect to BareMetal-Manager, the Manager of your established Red Hat Enterprise Virtualization environment, and stop the engine and prevent it from running.

   # service ovirt-engine stop
   # chkconfig ovirt-engine off

   Note

   Though stopping BareMetal-Manager from running is not obligatory, it is recommended as it ensures no changes will be made to the environment after the backup has been created. Additionally, it prevents BareMetal-Manager and HostedEngine-VM from simultaneously managing existing resources.

10. Updating DNS

    Update your DNS so that the FQDN of the Red Hat Enterprise Virtualization environment correlates to the IP address of HostedEngine-VM and the FQDN previously provided when configuring the hosted-engine deployment script on Host-HE1. In this procedure, FQDN was set as manager.example.com because in a migrated hosted-engine setup, the FQDN provided for the engine must be identical to that given in the engine setup of the original engine.

11. Creating a Backup of BareMetal-Manager

    Connect to BareMetal-Manager and run the engine-backup command with the --mode=backup, --file=FILE, and --log=LogFILE parameters to specify the backup mode, the name of the backup file created and used for the backup, and the name of the log file to be created to store the backup log.

    # engine-backup --mode=backup --file=FILE --log=LogFILE

12. Copying the Backup File to HostedEngine-VM

    On BareMetal-Manager, secure copy the backup file to HostedEngine-VM. In the following example, manager.example.com is the FQDN for HostedEngine-VM, and /backup/ is any designated folder or path. If the designated folder or path does not exist, you must connect to HostedEngine-VM and create it before secure copying the backup from BareMetal-Manager.

    # scp -p FILE LogFILE manager.example.com:/backup/

13. Restoring the Backup File on HostedEngine-VM

    Use the engine-backup tool to restore a complete backup. If you configured the BareMetal-Manager database(s) manually during engine-setup, follow the instructions at Section 7.2.3, “Restoring the Self-Hosted Engine Manager Manually” to restore the backup environment manually.
    • If you are only restoring the Manager, run:

      # engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --restore-permissions

    • If you are restoring the Manager, Reports, and Data Warehouse, run:

      # engine-backup --mode=restore --file=file_name --log=log_file_name --provision-db --provision-dwh-db --provision-reports-db --restore-permissions

    If successful, the following output displays:

    You should now run engine-setup.
    Done.

14. Configuring HostedEngine-VM

    Configure the restored Manager virtual machine. This process identifies the existing configuration settings and database content. Confirm the settings. Upon completion, the setup provides an SSH fingerprint and an internal Certificate Authority hash.

    # engine-setup

    [ INFO  ] Stage: Initializing
    [ INFO  ] Stage: Environment setup
    Configuration files: ['/etc/ovirt-engine-setup.conf.d/10-packaging.conf', '/etc/ovirt-engine-setup.conf.d/20-setup-ovirt-post.conf']
    Log file: /var/log/ovirt-engine/setup/ovirt-engine-setup-20140304075238.log
    Version: otopi-1.1.2 (otopi-1.1.2-1.el6ev)
    [ INFO  ] Stage: Environment packages setup
    [ INFO  ] Yum Downloading: rhel-65-zstream/primary_db 2.8 M(70%)
    [ INFO  ] Stage: Programs detection
    [ INFO  ] Stage: Environment setup
    [ INFO  ] Stage: Environment customization
             
              --== PACKAGES ==--
             
    [ INFO  ] Checking for product updates...
    [ INFO  ] No product updates found
             
              --== NETWORK CONFIGURATION ==--
             
    Setup can automatically configure the firewall on this system.
    Note: automatic configuration of the firewall may overwrite current settings.
    Do you want Setup to configure the firewall? (Yes, No) [Yes]: 
    [ INFO  ] iptables will be configured as firewall manager.
             
              --== DATABASE CONFIGURATION ==--
             
             
              --== OVIRT ENGINE CONFIGURATION ==--
             
             
              --== PKI CONFIGURATION ==--
             
             
              --== APACHE CONFIGURATION ==--
             
             
              --== SYSTEM CONFIGURATION ==--
             
             
              --== END OF CONFIGURATION ==--
             
    [ INFO  ] Stage: Setup validation
    [ INFO  ] Cleaning stale zombie tasks
             
              --== CONFIGURATION PREVIEW ==--
             
              Default SAN wipe after delete           : False
              Firewall manager                        : iptables
              Update Firewall                         : True
              Host FQDN                               : manager.example.com
              Engine database secured connection      : False
              Engine database host                    : X.X.X.X
              Engine database user name               : engine
              Engine database name                    : engine
              Engine database port                    : 5432
              Engine database host name validation    : False
              Engine installation                     : True
              PKI organization                        : example.com
              NFS mount point                         : /var/lib/exports/iso
              Configure VMConsole Proxy               : True
              Engine Host FQDN                        : manager.example.com
              Configure WebSocket Proxy               : True
             
              Please confirm installation settings (OK, Cancel) [OK]:

15. Synchronizing the Host and the Manager

    Return to Host-HE1 and continue the hosted-engine deployment script by selecting option 1:

    (1) Continue setup - oVirt-Engine installation is ready and ovirt-engine service is up

    The script displays the internal Certificate Authority hash, and prompts you to select the cluster to which to add Host-HE1.

    [ INFO  ] Engine replied: DB Up!Welcome to Health Status!
    [ INFO  ] Acquiring internal CA cert from the engine
    [ INFO  ] The following CA certificate is going to be used, please immediately interrupt if not correct:
    [ INFO  ] Issuer: C=US, O=example.com, CN=manager.example.com.23240, Subject: C=US, O=example.com, CN=manager.example.com.23240, Fingerprint (SHA-1): XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
    [ INFO  ] Connecting to the Engine
              Enter the name of the cluster to which you want to add the host (DB1, DB2, Default) [Default]:
    [ INFO  ] Waiting for the host to become operational in the engine. This may take several minutes...
    [ INFO  ] The VDSM Host is now operational
    [ INFO  ] Saving hosted-engine configuration on the shared storage domain
              Please shutdown the VM allowing the system to launch it as a monitored service.
              The system will wait until the VM is down.

16. Shutting Down HostedEngine-VM

    Shut down HostedEngine-VM.

    # shutdown -h now

17. Setup Confirmation

    Return to Host-HE1 to confirm it has detected that HostedEngine-VM is down.

    [ INFO  ] Enabling and starting HA services
    [ INFO  ] Stage: Clean up
    [ INFO  ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509162843.conf'
    [ INFO  ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf'
    [ INFO  ] Stage: Pre-termination
    [ INFO  ] Stage: Termination
    [ INFO  ] Hosted Engine successfully set up