Este contenido no está disponible en el idioma seleccionado.

Access control

Red Hat Advanced Cluster Management for Kubernetes 2.6

Chapter 1. Access control
Copiar enlace

Access control might need to manually be created and managed. You must configure authentication service requirements for Red Hat Advanced Cluster Management for Kubernetes to onboard workloads to Identity and Access Management (IAM). For more information see, Understanding authentication in Understanding authentication in the OpenShift Container Platform documentation.

Role-based access control and authentication identifies the user associated roles and cluster credentials. See the following files for information about access and credentials.

Required access: Cluster administrator

Role-based access control

1.1. Role-based access control
Copiar enlace

Red Hat Advanced Cluster Management for Kubernetes supports role-based access control (RBAC). Your role determines the actions that you can perform. RBAC is based on the authorization mechanisms in Kubernetes, similar to Red Hat OpenShift Container Platform. For more information about RBAC, see the OpenShift RBAC overview in the OpenShift Container Platform documentation.

Note: Action buttons are disabled from the console if the user-role access is impermissible.

View the following sections for details of supported RBAC by component:

Overview of roles
RBAC implementation
Cluster lifecycle RBAC
Application lifecycle RBAC
Governance lifecycle RBAC
Observability RBAC

1.1.1. Overview of roles
Copiar enlace

Some product resources are cluster-wide and some are namespace-scoped. You must apply cluster role bindings and namespace role bindings to your users for consistent access controls. View the table list of the following role definitions that are supported in Red Hat Advanced Cluster Management for Kubernetes:

Expand

Table 1.1. Role definition table
Role	Definition
`cluster-admin`	This is an OpenShift Container Platform default role. A user with cluster binding to the `cluster-admin` role is an OpenShift Container Platform super user, who has all access.
`open-cluster-management:cluster-manager-admin`	A user with cluster binding to the `open-cluster-management:cluster-manager-admin` role is a Red Hat Advanced Cluster Management for Kubernetes super user, who has all access. This role allows the user to create a `ManagedCluster` resource.
`open-cluster-management:admin:<managed_cluster_name>`	A user with cluster binding to the `open-cluster-management:admin:<managed_cluster_name>` role has administrator access to the `ManagedCluster` resource named, `<managed_cluster_name>`. When a user has a managed cluster, this role is automatically created.
`open-cluster-management:view:<managed_cluster_name>`	A user with cluster binding to the `open-cluster-management:view:<managed_cluster_name>` role has view access to the `ManagedCluster` resource named, `<managed_cluster_name>`.
`open-cluster-management:managedclusterset:admin:<managed_clusterset_name>`	A user with cluster binding to the `open-cluster-management:managedclusterset:admin:<managed_clusterset_name>` role has administrator access to `ManagedCluster` resource named `<managed_clusterset_name>`. The user also has administrator access to `managedcluster.cluster.open-cluster-management.io`, `clusterclaim.hive.openshift.io`, `clusterdeployment.hive.openshift.io`, and `clusterpool.hive.openshift.io` resources, which has the managed cluster set label: `cluster.open-cluster-management.io/clusterset=<managed_clusterset_name>`. A role binding is automatically generated when you are using a cluster set. See Creating and managing ManagedClusterSets to learn how to manage the resource.
`open-cluster-management:managedclusterset:view:<managed_clusterset_name>`	A user with cluster binding to the `open-cluster-management:managedclusterset:view:<managed_clusterset_name>` role has view access to the `ManagedCluster` resource named, <managed_clusterset_name>`. The user also has view access to `managedcluster.cluster.open-cluster-management.io`, `clusterclaim.hive.openshift.io`, `clusterdeployment.hive.openshift.io`, and `clusterpool.hive.openshift.io` resources, which has the managed cluster set labels: `cluster.open-cluster-management.io`, `clusterset=<managed_clusterset_name>`. For more details on how to manage managed cluster set resources, see Creating and managing ManagedClusterSets.
`open-cluster-management:subscription-admin`	A user with the `open-cluster-management:subscription-admin` role can create Git subscriptions that deploy resources to multiple namespaces. The resources are specified in Kubernetes resource YAML files in the subscribed Git repository. Note: When a non-subscription-admin user creates a subscription, all resources are deployed into the subscription namespace regardless of specified namespaces in the resources. For more information, see the Application lifecycle RBAC section.
admin, edit, view	Admin, edit, and view are OpenShift Container Platform default roles. A user with a namespace-scoped binding to these roles has access to `open-cluster-management` resources in a specific namespace, while cluster-wide binding to the same roles gives access to all of the `open-cluster-management` resources cluster-wide.
`open-cluster-management:managedclusterset:bind:<managed_clusterset_name>`	A user with the `open-cluster-management:managedclusterset:bind:<managed_clusterset_name>` role has view access to the managed cluster resource called `<managed_clusterset_name>`. The user can bind `<managed_clusterset_name>` to a namespace. The user also has view access to `managedcluster.cluster.open-cluster-management.io`, `clusterclaim.hive.openshift.io`, `clusterdeployment.hive.openshift.io`, and `clusterpool.hive.openshift.io` resources, which have the following managed cluster set label: `cluster.open-cluster-management.io/clusterset=<managed_clusterset_name>`. See Creating and managing ManagedClusterSets to learn how to manage the resource.

Important:

Any user can create projects from OpenShift Container Platform, which gives administrator role permissions for the namespace.
If a user does not have role access to a cluster, the cluster name is not visible. The cluster name is displayed with the following symbol: -.

1.1.2. RBAC implementation
Copiar enlace

RBAC is validated at the console level and at the API level. Actions in the console can be enabled or disabled based on user access role permissions. View the following sections for more information on RBAC for specific lifecycles in the product.

1.1.2.1. Cluster lifecycle RBAC
Copiar enlace

View the following cluster lifecycle RBAC operations.

To create and administer all managed clusters:
- Create a cluster role binding to the cluster role open-cluster-management:cluster-manager-admin by entering the following command:
  oc create clusterrolebinding <role-binding-name> --clusterrole=open-cluster-management:cluster-manager-admin --user=<username>
  Copy to Clipboard Toggle word wrap
  This role is a super user, which has access to all resources and actions. You can create cluster-scoped managedcluster resources, the namespace for the resources that manage the managed cluster, and the resources in the namespace with this role. You can also access provider connections and bare metal assets that are used to create managed clusters with this role. You might need to add the username of the ID that requires the role association to avoid permission errors.
To administer a managed cluster named cluster-name:
- Create a cluster role binding to the cluster role open-cluster-management:admin:<cluster-name> by entering the following command:
  oc create clusterrolebinding (role-binding-name) --clusterrole=open-cluster-management:admin:<cluster-name> --user=<username>
  Copy to Clipboard Toggle word wrap
  This role has read and write access to the cluster-scoped managedcluster resource. This is needed because the managedcluster is a cluster-scoped resource and not a namespace-scoped resource.
- Create a namespace role binding to the cluster role admin by entering the following command:
  oc create rolebinding <role-binding-name> -n <cluster-name> --clusterrole=admin --user=<username>
  Copy to Clipboard Toggle word wrap
  This role has read and write access to the resources in the namespace of the managed cluster.
To view a managed cluster named cluster-name:
- Create a cluster role binding to the cluster role open-cluster-management:view:<cluster-name> by entering the following command:
  oc create clusterrolebinding <role-binding-name> --clusterrole=open-cluster-management:view:<cluster-name> --user=<username>
  Copy to Clipboard Toggle word wrap
  This role has read access to the cluster-scoped managedcluster resource. This is needed because the managedcluster is a cluster-scoped resource and not a namespace-scoped resource.
- Create a namespace role binding to the cluster role view by entering the following command:
  oc create rolebinding <role-binding-name> -n <cluster-name> --clusterrole=view --user=<username>
  Copy to Clipboard Toggle word wrap
  This role has read-only access to the resources in the namespace of the managed cluster.
View a list of the managed clusters that you can access by entering the following command:
```
oc get managedclusters.clusterview.open-cluster-management.io
```
```
oc get managedclusters.clusterview.open-cluster-management.io
```
Copy to Clipboard Toggle word wrap
This command is used by administrators and users without cluster administrator privileges.
View a list of the managed cluster sets that you can access by entering the following command:
```
oc get managedclustersets.clusterview.open-cluster-management.io
```
```
oc get managedclustersets.clusterview.open-cluster-management.io
```
Copy to Clipboard Toggle word wrap
This command is used by administrators and users without cluster administrator privileges.

1.1.2.1.1. Cluster pools RBAC
Copiar enlace

View the following cluster pool RBAC operations.

To use cluster pool provision clusters:
- As a cluster administrator, create a managed cluster set and grant administrator permission to roles by adding the role to the group.
  - Grant admin permission to the server-foundation-clusterset managed cluster set with the following command:
    
    oc adm policy add-cluster-role-to-group open-cluster-management:clusterset-admin:server-foundation-clusterset server-foundation-team-admin
    
    Copy to Clipboard Toggle word wrap
  - Grant view permission to the server-foundation-clusterset managed cluster set with the following command:
    
    oc adm policy add-cluster-role-to-group open-cluster-management:clusterset-view:server-foundation-clusterset server-foundation-team-user
    
    Copy to Clipboard Toggle word wrap
- Create a namespace for the cluster pool, server-foundation-clusterpool.
  - Grant admin permission to server-foundation-clusterpool for the server-foundation-team-admin by running the following commands:
    
    oc adm new-project server-foundation-clusterpool oc adm policy add-role-to-group admin server-foundation-team-admin --namespace server-foundation-clusterpool
    
    Copy to Clipboard Toggle word wrap
- As a team administrator, create a cluster pool named ocp46-aws-clusterpool with a cluster set label, cluster.open-cluster-management.io/clusterset=server-foundation-clusterset in the cluster pool namespace.
  - The server-foundation-webhook checks if the cluster pool has the cluster set label, and if the user has permission to create cluster pools in the cluster set.
  - The server-foundation-controller grants view permission to the server-foundation-clusterpool namespace for server-foundation-team-user.
- When a cluster pool is created, the cluster pool creates a clusterdeployment.
  - The server-foundation-controller grants admin permission to the clusterdeployment namespace for server-foundation-team-admin.
  - The server-foundation-controller grants view permission clusterdeployment namespace for server-foundation-team-user.
    Note: As a team-admin and team-user, you have admin permission to the clusterpool, clusterdeplyment, and clusterclaim.

View the following console and API RBAC tables for cluster lifecycle:

Expand

Table 1.2. Console RBAC table for cluster lifecycle
Resource	Admin	Edit	View
Clusters	read, update, delete	-	read
Cluster sets	get, update, bind, join	edit role not mentioned	get
Managed clusters	read, update, delete	no edit role mentioned	get
Provider connections	create, read, update, and delete	-	read
Bare metal asset	create, read, update, delete	-	read

Expand

Table 1.3. API RBAC table for cluster lifecycle
API	Admin	Edit	View
`managedclusters.cluster.open-cluster-management.io` You can use `mcl` (singular) or `mcls` (plural) in commands for this API.	create, read, update, delete	read, update	read
`managedclusters.view.open-cluster-management.io` You can use `mcv` (singular) or `mcvs` (plural) in commands for this API.	read	read	read
`managedclusters.register.open-cluster-management.io/accept`	update	update
`managedclusterset.cluster.open-cluster-management.io` You can use `mclset` (singular) or `mclsets` (plural) in commands for this API.	create, read, update, delete	read, update	read
`managedclustersets.view.open-cluster-management.io`	read	read	read
`managedclustersetbinding.cluster.open-cluster-management.io` You can use `mclsetbinding` (singular) or `mclsetbindings` (plural) in commands for this API.	create, read, update, delete	read, update	read
`baremetalassets.inventory.open-cluster-management.io`	create, read, update, delete	read, update	read
`klusterletaddonconfigs.agent.open-cluster-management.io`	create, read, update, delete	read, update	read
`managedclusteractions.action.open-cluster-management.io`	create, read, update, delete	read, update	read
`managedclusterviews.view.open-cluster-management.io`	create, read, update, delete	read, update	read
`managedclusterinfos.internal.open-cluster-management.io`	create, read, update, delete	read, update	read
`manifestworks.work.open-cluster-management.io`	create, read, update, delete	read, update	read
`submarinerconfigs.submarineraddon.open-cluster-management.io`	create, read, update, delete	read, update	read
`placements.cluster.open-cluster-management.io`	create, read, update, delete	read, update	read

1.1.2.2. Credentials role-based access control
Copiar enlace

The access to credentials is controlled by Kubernetes. Credentials are stored and secured as Kubernetes secrets. The following permissions apply to accessing secrets in Red Hat Advanced Cluster Management for Kubernetes:

Users with access to create secrets in a namespace can create credentials.
Users with access to read secrets in a namespace can also view credentials.
Users with the Kubernetes cluster roles of admin and edit can create and edit secrets.
Users with the Kubernetes cluster role of view cannot view secrets because reading the contents of secrets enables access to service account credentials.

1.1.2.3. Application lifecycle RBAC
Copiar enlace

When you create an application, the subscription namespace is created and the configuration map is created in the subscription namespace. You must also have access to the channel namespace. When you want to apply a subscription, you must be a subscription administrator. For more information on managing applications, see Creating an allow and deny list as subscription administrator.

View the following application lifecycle RBAC operations:

To create and administer application on all managed clusters with a user named username:
- Create a cluster role binding to the open-cluster-management:cluster-manager-admin cluster role and bind it to username, run the following command:
  oc create clusterrolebinding <role-binding-name> --clusterrole=open-cluster-management:cluster-manager-admin --user=<username>
  Copy to Clipboard Toggle word wrap
  This role is a super user, which has access to all resources and actions. You can create the namespace for the application and all application resources in the namespace with this role.
Option: You can create applications that deploy resources to multiple namespaces:
- Create a cluster role binding to the open-cluster-management:subscription-admin cluster role, and bind it to a user named username. Run the following command:
  oc create clusterrolebinding <role-binding-name> --clusterrole=open-cluster-management:subscription-admin --user=<username>
  Copy to Clipboard Toggle word wrap
To create and administer an application named application-name in the cluster-name managed cluster, with username user:
- Create a cluster role binding to the open-cluster-management:admin: cluster role and bind it to username by entering the following command:
  oc create clusterrolebinding <role-binding-name> --clusterrole=open-cluster-management:admin:<cluster-name> --user=<username>
  Copy to Clipboard Toggle word wrap
  This role has read and write access to all application resources on the managed cluster, cluster-name. Repeat this if access for other managed clusters is required.
- Create a namespace role binding to the application namespace using the admin role and bind it to username by entering the following command:
  oc create rolebinding <role-binding-name> -n <application-namespace> --clusterrole=admin --user=<username>
  Copy to Clipboard Toggle word wrap
  This role has read and write access to all application resources in the application namspace. Repeat this if access for other applications is required or if the application deploys to multiple namespaces.
Option: You can create applications that deploy resources to multiple namespaces:
- Create a cluster role binding to the open-cluster-management:subscription-admin cluster role and bind it to username by entering the following command:
  oc create clusterrolebinding <role-binding-name> --clusterrole=open-cluster-management:subscription-admin --user=<username>
  Copy to Clipboard Toggle word wrap
To view an application on a managed cluster named cluster-name with the user named username:
- Create a cluster role binding to the open-cluster-management:view: cluster role and bind it to username by entering the following command:
  oc create clusterrolebinding <role-binding-name> --clusterrole=open-cluster-management:view:<cluster-name> --user=<username>
  Copy to Clipboard Toggle word wrap
  This role has read access to all application resources on the managed cluster, cluster-name. Repeat this if access for other managed clusters is required.
- Create a namespace role binding to the application namespace using the view role and bind it to username. Enter the following command:
  oc create rolebinding <role-binding-name> -n <application-namespace> --clusterrole=view --user=<username>
  Copy to Clipboard Toggle word wrap
  This role has read access to all application resources in the application namspace. Repeat this if access for other applications is required.

View the following console and API RBAC tables for Application lifecycle:

Expand

Table 1.4. Console RBAC table for application lifecycle
Resource	Admin	Edit	View
Application	create, read, update, delete	create, read, update, delete	read
Channel	create, read, update, delete	create, read, update, delete	read
Subscription	create, read, update, delete	create, read, update, delete	read
Placement rule	create, read, update, delete	create, read, update, delete	read

Expand

Table 1.5. API RBAC table for application lifecycle
API	Admin	Edit	View
applications.app.k8s.io	create, read, update, delete	create, read, update, delete	read
channels.apps.open-cluster-management.io	create, read, update, delete	create, read, update, delete	read
deployables.apps.open-cluster-management.io	create, read, update, delete	create, read, update, delete	read
helmreleases.apps.open-cluster-management.io	create, read, update, delete	create, read, update, delete	read
placements.apps.open-cluster-management.io	create, read, update, delete	create, read, update, delete	read
placementrules.apps.open-cluster-management.io	create, read, update, delete	create, read, update, delete	read
subscriptions.apps.open-cluster-management.io	create, read, update, delete	create, read, update, delete	read
configmaps	create, read, update, delete	create, read, update, delete	read
secrets	create, read, update, delete	create, read, update, delete	read
namespaces	create, read, update, delete	create, read, update, delete	read

1.1.2.4. Governance lifecycle RBAC
Copiar enlace

When a policy is created, the policy is created in the cluster. Roles for the governance lifecycle are namespace-scoped. A user must also have access to the managed cluster.

To perform governance lifecycle operations, users must have access to the namespace where the policy is created, along with access to the managed cluster where the policy is applied.

View the following examples:

To create a policy in the policy namespace and apply it in a managed cluster named cluster-name:
- Create a namespace role binding to the policy namespace using the open-cluster-management:admin:<cluster-name> cluster role. Run the following command:
  oc create rolebinding <role-binding-name> -n <policy-namespace> --clusterrole=open-cluster-management:admin:<cluster-name> --user=<username>
  Copy to Clipboard Toggle word wrap

To view a policy in a managed cluster:

Create a cluster role binding to open-cluster-management:view:<cluster-name> cluster role and bind it to the view role with the following command:

oc create clusterrolebinding <role-binding-name> --clusterrole=open-cluster-management:view:<cluster-name> --user=<username>

oc create clusterrolebinding <role-binding-name> --clusterrole=open-cluster-management:view:<cluster-name> --user=<username>

Copy to Clipboard

Toggle word wrap

View the following console and API RBAC tables for governance lifecycle:

Expand

Table 1.6. Console RBAC table for governance lifecycle
Resource	Admin	Edit	View
Policies	create, read, update, delete	read, update	read
PlacementBindings	create, read, update, delete	read, update	read
Placements	create, read, update, delete	read, update	read
PlacementRules	create, read, update, delete	read, update	read
PolicyAutomations	create, read, update, delete	read, update	read

Expand

Table 1.7. API RBAC table for governance lifecycle
API	Admin	Edit	View
policies.policy.open-cluster-management.io	create, read, update, delete	read, update	read
placementbindings.policy.open-cluster-management.io	create, read, update, delete	read, update	read
policyautomations.policy.open-cluster-management.io	create, read, update, delete	read, update	read

1.1.2.5. Observability RBAC
Copiar enlace

To view the observability metrics for a managed cluster, you must have view access to that managed cluster on the hub cluster. View the following list of observability features:

Access managed cluster metrics.
Users are denied access to managed cluster metrics, if they are not assigned to the view role for the managed cluster on the hub cluster.
Search for resources.

To view observability data in Grafana, you must have a RoleBinding resource in the same namespace of the managed cluster. View the following RoleBinding example:

kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
 name: <replace-with-name-of-rolebinding>
 namespace: <replace-with-name-of-managedcluster-namespace>
subjects:
 - kind: <replace with User|Group|ServiceAccount>
   apiGroup: rbac.authorization.k8s.io
   name: <replace with name of User|Group|ServiceAccount>
roleRef:
 apiGroup: rbac.authorization.k8s.io
 kind: ClusterRole
 name: view

kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
 name: <replace-with-name-of-rolebinding>
 namespace: <replace-with-name-of-managedcluster-namespace>
subjects:
 - kind: <replace with User|Group|ServiceAccount>
   apiGroup: rbac.authorization.k8s.io
   name: <replace with name of User|Group|ServiceAccount>
roleRef:
 apiGroup: rbac.authorization.k8s.io
 kind: ClusterRole
 name: view

Copy to Clipboard

Toggle word wrap

See Role binding policy for more information. See Customizing observability to configure observability.

To manage components of observability, view the following API RBAC table:

Expand

Table 1.8. API RBAC table for observability
API	Admin	Edit	View
multiclusterobservabilities.observability.open-cluster-management.io	create, read, update, and delete	read, update	read
`searchcustomizations.search.open-cluster-management.io`	create, get, list, watch, update, delete, patch	-	-
`policyreports.wgpolicyk8s.io`	get, list, watch	get, list, watch	get, list, watch

To continue to learn more about securing your cluster, see Risk and compliance.

Legal Notice
Copiar enlace

The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.

Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.

Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.

Linux® is the registered trademark of Linus Torvalds in the United States and other countries.

Java® is a registered trademark of Oracle and/or its affiliates.

XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.

MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.

Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.

The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.

All other trademarks are the property of their respective owners.

Este contenido no está disponible en el idioma seleccionado.

Access control

Read more to learn about role-based access control and authentication.

Chapter 1. Access control
Copiar enlace

1.1. Role-based access control
Copiar enlace

1.1.1. Overview of roles
Copiar enlace

1.1.2. RBAC implementation
Copiar enlace

1.1.2.1. Cluster lifecycle RBAC
Copiar enlace

1.1.2.1.1. Cluster pools RBAC
Copiar enlace

1.1.2.2. Credentials role-based access control
Copiar enlace

1.1.2.3. Application lifecycle RBAC
Copiar enlace

1.1.2.4. Governance lifecycle RBAC
Copiar enlace

1.1.2.5. Observability RBAC
Copiar enlace

Legal Notice
Copiar enlace

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Hacer que el código abierto sea más inclusivo

Acerca de Red Hat

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links

Este contenido no está disponible en el idioma seleccionado.

Access control

Read more to learn about role-based access control and authentication.

Chapter 1. Access controlCopiar enlaceEnlace copiado en el portapapeles!

1.1. Role-based access controlCopiar enlaceEnlace copiado en el portapapeles!

1.1.1. Overview of rolesCopiar enlaceEnlace copiado en el portapapeles!

1.1.2. RBAC implementationCopiar enlaceEnlace copiado en el portapapeles!

1.1.2.1. Cluster lifecycle RBACCopiar enlaceEnlace copiado en el portapapeles!

1.1.2.1.1. Cluster pools RBACCopiar enlaceEnlace copiado en el portapapeles!

1.1.2.2. Credentials role-based access controlCopiar enlaceEnlace copiado en el portapapeles!

1.1.2.3. Application lifecycle RBACCopiar enlaceEnlace copiado en el portapapeles!

1.1.2.4. Governance lifecycle RBACCopiar enlaceEnlace copiado en el portapapeles!

1.1.2.5. Observability RBACCopiar enlaceEnlace copiado en el portapapeles!

Legal NoticeCopiar enlaceEnlace copiado en el portapapeles!

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Hacer que el código abierto sea más inclusivo

Acerca de Red Hat

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links

Chapter 1. Access control
Copiar enlace

1.1. Role-based access control
Copiar enlace

1.1.1. Overview of roles
Copiar enlace

1.1.2. RBAC implementation
Copiar enlace

1.1.2.1. Cluster lifecycle RBAC
Copiar enlace

1.1.2.1.1. Cluster pools RBAC
Copiar enlace

1.1.2.2. Credentials role-based access control
Copiar enlace

1.1.2.3. Application lifecycle RBAC
Copiar enlace

1.1.2.4. Governance lifecycle RBAC
Copiar enlace

1.1.2.5. Observability RBAC
Copiar enlace

Legal Notice
Copiar enlace