Ce contenu n'est pas disponible dans la langue sélectionnée.
2.2. Man Pages
This section lists man pages that are relevant to Red Hat Cluster Suite, as an additional resource.
- Cluster Infrastructure
- ccs_tool (8) - The tool used to make online updates of CCS config files
- ccs_test (8) - The diagnostic tool for a running Cluster Configuration System
- ccsd (8) - The daemon used to access CCS cluster configuration files
- ccs (7) - Cluster Configuration System
- cman_tool (8) - Cluster Management Tool
- cluster.conf [cluster] (5) - The configuration file for cluster products
- qdisk (5) - a disk-based quorum daemon for CMAN / Linux-Cluster
- mkqdisk (8) - Cluster Quorum Disk Utility
- qdiskd (8) - Cluster Quorum Disk Daemon
- fence_ack_manual (8) - program run by an operator as a part of manual I/O Fencing
- fence_apc (8) - I/O Fencing agent for APC MasterSwitch
- fence_bladecenter (8) - I/O Fencing agent for IBM Bladecenter
- fence_brocade (8) - I/O Fencing agent for Brocade FC switches
- fence_bullpap (8) - I/O Fencing agent for Bull FAME architecture controlled by a PAP management console
- fence_drac (8) - fencing agent for Dell Remote Access Card
- fence_egenera (8) - I/O Fencing agent for the Egenera BladeFrame
- fence_gnbd (8) - I/O Fencing agent for GNBD-based GFS clusters
- fence_ilo (8) - I/O Fencing agent for HP Integrated Lights Out card
- fence_ipmilan (8) - I/O Fencing agent for machines controlled by IPMI over LAN
- fence_manual (8) - program run by fenced as a part of manual I/O Fencing
- fence_mcdata (8) - I/O Fencing agent for McData FC switches
- fence_node (8) - A program which performs I/O fencing on a single node
- fence_rib (8) - I/O Fencing agent for Compaq Remote Insight Lights Out card
- fence_rsa (8) - I/O Fencing agent for IBM RSA II
- fence_sanbox2 (8) - I/O Fencing agent for QLogic SANBox2 FC switches
- fence_scsi (8) - I/O fencing agent for SCSI persistent reservations
- fence_tool (8) - A program to join and leave the fence domain
- fence_vixel (8) - I/O Fencing agent for Vixel FC switches
- fence_wti (8) - I/O Fencing agent for WTI Network Power Switch
- fence_xvm (8) - I/O Fencing agent for Xen virtual machines
- fence_xvmd (8) - I/O Fencing agent host for Xen virtual machines
- fenced (8) - the I/O Fencing daemon
- High-availability Service Management
- clusvcadm (8) - Cluster User Service Administration Utility
- clustat (8) - Cluster Status Utility
- Clurgmgrd [clurgmgrd] (8) - Resource Group (Cluster Service) Manager Daemon
- clurmtabd (8) - Cluster NFS Remote Mount Table Daemon
- GFS
- gfs_fsck (8) - Offline GFS file system checker
- gfs_grow (8) - Expand a GFS filesystem
- gfs_jadd (8) - Add journals to a GFS filesystem
- gfs_mount (8) - GFS mount options
- gfs_quota (8) - Manipulate GFS disk quotas
- gfs_tool (8) - interface to gfs ioctl calls
- Cluster Logical Volume Manager
- clvmd (8) - cluster LVM daemon
- lvm (8) - LVM2 tools
- lvm.conf [lvm] (5) - Configuration file for LVM2
- lvmchange (8) - change attributes of the logical volume manager
- pvcreate (8) - initialize a disk or partition for use by LVM
- lvs (8) - report information about logical volumes
- Global Network Block Device
- gnbd_export (8) - the interface to export GNBDs
- gnbd_import (8) - manipulate GNBD block devices on a client
- gnbd_serv (8) - gnbd server daemon
- LVS
- pulse (8) - heartbeating daemon for monitoring the health of cluster nodes
- lvs.cf [lvs] (5) - configuration file for lvs
- lvscan (8) - scan (all disks) for logical volumes
- lvsd (8) - daemon to control the Red Hat clustering services
- ipvsadm (8) - Linux Virtual Server administration
- ipvsadm-restore (8) - restore the IPVS table from stdin
- ipvsadm-save (8) - save the IPVS table to stdout
- nanny (8) - tool to monitor status of services in a cluster
- send_arp (8) - tool to notify network of a new IP address / MAC address mapping
