Ce contenu n'est pas disponible dans la langue sélectionnée.
Chapter 3. Kernel Upgrades
Make sure to install the latest kernel where all proprietary drivers, if applicable, are certified and supported. Note that proprietary drivers are often installed under
/lib/modules/<kernel-version>/kernel/drivers/addon
. For example, the EMC PowerPath drivers can be found in the following directory when running the 2.4.21-32.0.1.ELhugemem
kernel:
$ ls -al /lib/modules/2.4.21-32.0.1.ELhugemem/kernel/drivers/addon/emcpower total 732 drwxr-xr-x 2 root root 4096 Aug 20 13:50 . drwxr-xr-x 19 root root 4096 Aug 20 13:50 .. -rw-r--r-- 1 root root 14179 Aug 20 13:50 emcphr.o -rw-r--r-- 1 root root 2033 Aug 20 13:50 emcpioc.o -rw-r--r-- 1 root root 91909 Aug 20 13:50 emcpmpaa.o -rw-r--r-- 1 root root 131283 Aug 20 13:50 emcpmpap.o -rw-r--r-- 1 root root 113922 Aug 20 13:50 emcpmpc.o -rw-r--r-- 1 root root 75380 Aug 20 13:50 emcpmp.o -rw-r--r-- 1 root root 263243 Aug 20 13:50 emcp.o -rw-r--r-- 1 root root 8294 Aug 20 13:50 emcpsf.o $
Therefore, when you upgrade the kernel you must ensure that all proprietary modules can be found in the right directory so that the kernel can load them. To check which kernels are installed, run the following command:
$ rpm -qa | grep kernel
To check which kernel is currently running, execute the following command:
$ uname -r
For example, to install the 2.4.21-32.0.1.ELhugemem kernel, download the kernel-hugemem RPM and execute the following command:
# rpm -ivh kernel-hugemem-2.4.21-32.0.1.EL.i686.rpm
Note
Never upgrade the kernel using the RPM option '
-U
'. The previous kernel should always be available if the newer kernel does not boot or work properly.
To make sure the right kernel is booted, check the
/etc/grub.conf
file if you use GRUB and change the "default
" attribute if necessary. Here is an example:
default=0 timeout=10 splashimage=(hd0,0)/grub/splash.xpm.gz title Red Hat Enterprise Linux AS (2.4.21-32.0.1.ELhugemem) root (hd0,0) kernel /vmlinuz-2.4.21-32.0.1.ELhugemem ro root=/dev/sda2 initrd /initrd-2.4.21-32.0.1.ELhugemem.img title Red Hat Enterprise Linux AS (2.4.21-32.0.1.ELsmp) root (hd0,0) kernel /vmlinuz-2.4.21-32.0.1.ELsmp ro root=/dev/sda2 initrd /initrd-2.4.21-32.0.1.ELsmp.img
In this example, the "
default
" attribute is set to "0
" which means that the 2.4.21-32.0.1.ELhugemem kernel
will be booted. If the "default
" attribute would be set to "1
", then 2.4.21-32.0.1.ELsmp
would be booted. After you installed the newer kernel reboot the system. Once you are sure that you do not need the old kernel anymore, you can remove the old kernel by running:
# rpm -e <OldKernelVersion>
When you remove a kernel, you do not need to update
/etc/grub.conf
.