Red Hat SummitCe contenu n'est pas disponible dans la langue sélectionnée.
Chapter 4. tuned and tuned-adm
This chapter covers using the tuned daemon for tuning system settings in virtualized environments.
tuned is a tuning profile delivery mechanism that adapts Red Hat Enterprise Linux for certain workload characteristics, such as requirements for CPU-intensive tasks, or storage/network throughput responsiveness. It provides a number of tuning profiles that are pre-configured to enhance performance and reduce power consumption in a number of specific use cases. Edit these profiles or create new profiles to create performance solutions tailored to your environment.
The virtualization-related profiles provided as part of tuned include:
virtual-guest- Based on the
throughput-performanceprofile,virtual-guestalso decreases the swappiness of virtual memory.Thevirtual-guestprofile is automatically selected when creating a Red Hat Enterprise Linux 7 guest virtual machine. It is the recommended profile for virtual machines.This profile is available in Red Hat Enterprise Linux 6.3 and later, but must be manually selected when installing a virtual machine. virtual-host- Based on the
throughput-performanceprofile,virtual-hostalso enables more aggressive writeback of dirty pages. This profile is the recommended profile for virtualization hosts, including both KVM and Red Hat Virtualization (RHV) hosts.
By default in a Red Hat Enterprise Linux 7 installation, the tuned package is installed and the
tuned service is enabled.
To list all available profiles and identify the current active profile, run:
It is also possible to create custom tuned profiles to encapsulate a set of tuning parameters. For instructions on creating custom tuned profiles, see the
tuned.conf man page.
To only display the currently active profile, run:
tuned-adm active
tuned-adm active
To switch to one of the available profiles, run:
tuned-adm profile profile_name
tuned-adm profile profile_name
For example, to switch to the
virtual-host profile, run:
tuned-adm profile virtual-host
tuned-adm profile virtual-hostImportant
After setting a tuned profile in Red Hat Enterprise Linux 7.1 and above, make sure the tuned service is enabled for the configured profile to be applied after a reboot:
systemctl enable tuned
# systemctl enable tuned
In some cases, it is preferable to disable tuned to use parameters set manually. To disable all tuning for the current session, run:
tuned-adm off
# tuned-adm off
To permanently disable tuned and revert all changes it performed, run:
tuned-adm off; systemctl disable tuned
# tuned-adm off; systemctl disable tunedNote
For further information about tuned, see the Red Hat Enterprise Linux 7 Performance Tuning Guide.
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}