Ce contenu n'est pas disponible dans la langue sélectionnée.
Chapter 154. SNMP
SNMP Component
The snmp: component gives you the ability to poll SNMP capable devices or receiving traps.
URI format
snmp://hostname[:port][?Options]
The component supports polling OID values from an SNMP enabled device and receiving traps.
You can append query options to the URI in the following format,
?option=value&option=value&...
Options
| Name | Default Value | Description |
|---|---|---|
type
|
none |
The type of action you want to perform. Actually you can enter here POLL or TRAP. The value POLL will instruct the endpoint to poll a given host for the supplied OID keys. If you put in TRAP you will setup a listener for SNMP Trap Events.
|
address
|
none |
This is the IP address and the port of the host to poll or where to setup the Trap Receiver. Example: 127.0.0.1:162
|
protocol
|
udp
|
Here you can select which protocol to use. You can use either udp or tcp.
|
retries
|
2
|
Defines how often a retry is made before canceling the request. |
timeout
|
1500
|
Sets the timeout value for the request in millis. |
snmpVersion
|
0 (which means SNMPv1)
|
Sets the SNMP version for the request. |
snmpCommunity
|
public
|
Sets the community octet string for the snmp request. |
delay
|
60000
|
Defines the delay in milliseconds between two poll cycles. Note that in previous releases, this option was specified in units of seconds. |
oids
|
none |
Defines which values you are interested in. Please have a look at the Wikipedia to get a better understanding. You may provide a single OID or a coma separated list of OIDs. Example: oids="1.3.6.1.2.1.1.3.0,1.3.6.1.2.1.25.3.2.1.5.1,1.3.6.1.2.1.25.3.5.1.1.1,1.3.6.1.2.1.43.5.1.1.11.1"
|
The result of a poll
Given the situation, that I poll for the following OIDs:
1.3.6.1.2.1.1.3.0 1.3.6.1.2.1.25.3.2.1.5.1 1.3.6.1.2.1.25.3.5.1.1.1 1.3.6.1.2.1.43.5.1.1.11.1
The result will be the following:
<?xml version="1.0" encoding="UTF-8"?>
<snmp>
<entry>
<oid>1.3.6.1.2.1.1.3.0</oid>
<value>6 days, 21:14:28.00</value>
</entry>
<entry>
<oid>1.3.6.1.2.1.25.3.2.1.5.1</oid>
<value>2</value>
</entry>
<entry>
<oid>1.3.6.1.2.1.25.3.5.1.1.1</oid>
<value>3</value>
</entry>
<entry>
<oid>1.3.6.1.2.1.43.5.1.1.11.1</oid>
<value>6</value>
</entry>
<entry>
<oid>1.3.6.1.2.1.1.1.0</oid>
<value>My Very Special Printer Of Brand Unknown</value>
</entry>
</snmp>
As you maybe recognized there is one more result than requested....1.3.6.1.2.1.1.1.0. This one is filled in by the device automatically in this special case. So it may absolutely happen, that you receive more than you requested...be prepared.
Examples
Polling a remote device:
snmp:192.168.178.23:161?protocol=udp&type=POLL&oids=1.3.6.1.2.1.1.5.0
Setting up a trap receiver (no OID info is needed here!):
snmp:127.0.0.1:162?protocol=udp&type=TRAP
From Camel 2.10.0, you can get the community of SNMP TRAP with message header 'securityName', peer address of the SNMP TRAP with message header 'peerAddress'.
Routing example in Java (converts the SNMP PDU to XML String):
from("snmp:192.168.178.23:161?protocol=udp&type=POLL&oids=1.3.6.1.2.1.1.5.0").
convertBodyTo(String.class).
to("activemq:snmp.states");