Images

The Cluster Samples Operator is bootstrapped as Managed by default or if global proxy is configured. In the Managed state, the Cluster Samples Operator is actively managing its resources and keeping the component active in order to pull sample image streams and images from the registry and ensure that the requisite sample templates are installed.

Certain circumstances result in the Cluster Samples Operator bootstrapping itself as Removed including:

However, if the Cluster Samples Operator detects that it is on an IPv6 network and an OpenShift Container Platform global proxy is configured, then IPv6 check supersedes all the checks. As a result, the Cluster Samples Operator bootstraps itself as Removed.

apiVersion: samples.operator.openshift.io/v1
kind: Config
metadata:
  name: cluster
spec:
  architectures:
  - x86_64
  managementState: Removed

After creation or update of a samples image stream, the Cluster Samples Operator monitors the progress of each image stream tag’s image import.

If an import fails, the Cluster Samples Operator retries the import through the image stream image import API, which is the same API used by the oc import-image command, approximately every 15 minutes until it sees the import succeed, or if the Cluster Samples Operator’s configuration is changed such that either the image stream is added to the skippedImagestreams list, or the management state is changed to Removed.

Additional resources

During installation, OpenShift Container Platform creates a config map named imagestreamtag-to-image in the openshift-cluster-samples-operator namespace. The imagestreamtag-to-image config map contains an entry, the populating image, for each image stream tag.

The format of the key for each entry in the data field in the config map is <image_stream_name>_<image_stream_tag_name>.

During a disconnected installation of OpenShift Container Platform, the status of the Cluster Samples Operator is set to Removed. If you choose to change it to Managed, it installs samples.

You can use this config map as a reference for which images need to be mirrored for your image streams to import.

See Using Cluster Samples Operator image streams with alternate or mirrored registries for a detailed procedure.

When the Cluster Samples Operator starts supporting multiple architectures, the architecture list is not allowed to be changed while in the Managed state.

To change the architectures values, a cluster administrator must:

The Cluster Samples Operator still processes secrets while in Removed state. You can create the secret before switching to Removed, while in Removed before switching to Managed, or after switching to Managed state. There are delays in creating the samples until the secret event is processed if you create the secret after switching to Managed. This helps facilitate the changing of the registry, where you choose to remove all the samples before switching to insure a clean slate. Removing all samples before switching is not required.

The samples resource maintains the following conditions in its status:

Before you create the mirror registry, you must prepare the mirror host.

You can install the OpenShift CLI (oc) to interact with OpenShift Container Platform from a command-line interface. You can install oc on Linux, Windows, or macOS.

Installing the OpenShift CLI on Linux

You can install the OpenShift CLI (oc) binary on Linux by using the following procedure.

After you install the OpenShift CLI, it is available using the oc command:

$ oc <command>

Installing the OpenShift CLI on Windows

You can install the OpenShift CLI (oc) binary on Windows by using the following procedure.

After you install the OpenShift CLI, it is available using the oc command:

C:\> oc <command>

Installing the OpenShift CLI on macOS

You can install the OpenShift CLI (oc) binary on macOS by using the following procedure.

After you install the OpenShift CLI, it is available using the oc command:

$ oc <command>

During installation, OpenShift Container Platform creates a config map named imagestreamtag-to-image in the openshift-cluster-samples-operator namespace. The imagestreamtag-to-image config map contains an entry, the populating image, for each image stream tag.

The format of the key for each entry in the data field in the config map is <image_stream_name>_<image_stream_tag_name>.

During a disconnected installation of OpenShift Container Platform, the status of the Cluster Samples Operator is set to Removed. If you choose to change it to Managed, it installs samples.

You can use this config map as a reference for which images need to be mirrored for your image streams to import.

See Using Cluster Samples Operator image streams with alternate or mirrored registries for a detailed procedure.

The following guidelines apply when creating a container image in general, and are independent of whether the images are used on OpenShift Container Platform.

Reuse images

Wherever possible, base your image on an appropriate upstream image using the FROM statement. This ensures your image can easily pick up security fixes from an upstream image when it is updated, rather than you having to update your dependencies directly.

In addition, use tags in the FROM instruction, for example, rhel:rhel7, to make it clear to users exactly which version of an image your image is based on. Using a tag other than latest ensures your image is not subjected to breaking changes that might go into the latest version of an upstream image.

Maintain compatibility within tags

When tagging your own images, try to maintain backwards compatibility within a tag. For example, if you provide an image named foo and it currently includes version 1.0, you might provide a tag of foo:v1. When you update the image, as long as it continues to be compatible with the original image, you can continue to tag the new image foo:v1, and downstream consumers of this tag are able to get updates without being broken.

If you later release an incompatible update, then switch to a new tag, for example foo:v2. This allows downstream consumers to move up to the new version at will, but not be inadvertently broken by the new incompatible image. Any downstream consumer using foo:latest takes on the risk of any incompatible changes being introduced.

Avoid multiple processes

Do not start multiple services, such as a database and SSHD, inside one container. This is not necessary because containers are lightweight and can be easily linked together for orchestrating multiple processes. OpenShift Container Platform allows you to easily colocate and co-manage related images by grouping them into a single pod.

This colocation ensures the containers share a network namespace and storage for communication. Updates are also less disruptive as each image can be updated less frequently and independently. Signal handling flows are also clearer with a single process as you do not have to manage routing signals to spawned processes.

Use exec in wrapper scripts

Many images use wrapper scripts to do some setup before starting a process for the software being run. If your image uses such a script, that script uses exec so that the script’s process is replaced by your software. If you do not use exec, then signals sent by your container runtime go to your wrapper script instead of your software’s process. This is not what you want.

If you have a wrapper script that starts a process for some server. You start your container, for example, using podman run -i, which runs the wrapper script, which in turn starts your process. If you want to close your container with CTRL+C. If your wrapper script used exec to start the server process, podman sends SIGINT to the server process, and everything works as you expect. If you did not use exec in your wrapper script, podman sends SIGINT to the process for the wrapper script and your process keeps running like nothing happened.

Also note that your process runs as PID 1 when running in a container. This means that if your main process terminates, the entire container is stopped, canceling any child processes you launched from your PID 1 process.

Clean temporary files

Remove all temporary files you create during the build process. This also includes any files added with the ADD command. For example, run the yum clean command after performing yum install operations.

You can prevent the yum cache from ending up in an image layer by creating your RUN statement as follows:

RUN yum -y install mypackage && yum -y install myotherpackage && yum clean all -y

Note that if you instead write:

RUN yum -y install mypackage
RUN yum -y install myotherpackage && yum clean all -y

Then the first yum invocation leaves extra files in that layer, and these files cannot be removed when the yum clean operation is run later. The extra files are not visible in the final image, but they are present in the underlying layers.

The current container build process does not allow a command run in a later layer to shrink the space used by the image when something was removed in an earlier layer. However, this may change in the future. This means that if you perform an rm command in a later layer, although the files are hidden it does not reduce the overall size of the image to be downloaded. Therefore, as with the yum clean example, it is best to remove files in the same command that created them, where possible, so they do not end up written to a layer.

In addition, performing multiple commands in a single RUN statement reduces the number of layers in your image, which improves download and extraction time.

Place instructions in the proper order

The container builder reads the Dockerfile and runs the instructions from top to bottom. Every instruction that is successfully executed creates a layer which can be reused the next time this or another image is built. It is very important to place instructions that rarely change at the top of your Dockerfile. Doing so ensures the next builds of the same image are very fast because the cache is not invalidated by upper layer changes.

For example, if you are working on a Dockerfile that contains an ADD command to install a file you are iterating on, and a RUN command to yum install a package, it is best to put the ADD command last:

FROM foo
RUN yum -y install mypackage && yum clean all -y
ADD myfile /test/myfile

This way each time you edit myfile and rerun podman build or docker build, the system reuses the cached layer for the yum command and only generates the new layer for the ADD operation.

If instead you wrote the Dockerfile as:

FROM foo
ADD myfile /test/myfile
RUN yum -y install mypackage && yum clean all -y

Then each time you changed myfile and reran podman build or docker build, the ADD operation would invalidate the RUN layer cache, so the yum operation must be rerun as well.

Mark important ports

The EXPOSE instruction makes a port in the container available to the host system and other containers. While it is possible to specify that a port should be exposed with a podman run invocation, using the EXPOSE instruction in a Dockerfile makes it easier for both humans and software to use your image by explicitly declaring the ports your software needs to run:

Set environment variables

It is good practice to set environment variables with the ENV instruction. One example is to set the version of your project. This makes it easy for people to find the version without looking at the Dockerfile. Another example is advertising a path on the system that could be used by another process, such as JAVA_HOME.

Avoid default passwords

Avoid setting default passwords. Many people extend the image and forget to remove or change the default password. This can lead to security issues if a user in production is assigned a well-known password. Passwords are configurable using an environment variable instead.

If you do choose to set a default password, ensure that an appropriate warning message is displayed when the container is started. The message should inform the user of the value of the default password and explain how to change it, such as what environment variable to set.

Avoid sshd

It is best to avoid running sshd in your image. You can use the podman exec or docker exec command to access containers that are running on the local host. Alternatively, you can use the oc exec command or the oc rsh command to access containers that are running on the OpenShift Container Platform cluster. Installing and running sshd in your image opens up additional vectors for attack and requirements for security patching.

Use volumes for persistent data

Images use a volume for persistent data. This way OpenShift Container Platform mounts the network storage to the node running the container, and if the container moves to a new node the storage is reattached to that node. By using the volume for all persistent storage needs, the content is preserved even if the container is restarted or moved. If your image writes data to arbitrary locations within the container, that content could not be preserved.

All data that needs to be preserved even after the container is destroyed must be written to a volume. Container engines support a readonly flag for containers, which can be used to strictly enforce good practices about not writing data to ephemeral storage in a container. Designing your image around that capability now makes it easier to take advantage of it later.

Explicitly defining volumes in your Dockerfile makes it easy for consumers of the image to understand what volumes they must define when running your image.

See the Kubernetes documentation for more information on how volumes are used in OpenShift Container Platform.

The following are guidelines that apply when creating container images specifically for use on OpenShift Container Platform.

RUN chgrp -R 0 /some/directory && \
    chmod -R g=u /some/directory

You can use the LABEL instruction in a Dockerfile to define image metadata. Labels are similar to environment variables in that they are key value pairs attached to an image or a container. Labels are different from environment variable in that they are not visible to the running application and they can also be used for fast look-up of images and containers.

Docker documentation for more information on the LABEL instruction.

The label names are typically namespaced. The namespace is set accordingly to reflect the project that is going to pick up the labels and use them. For OpenShift Container Platform the namespace is set to io.openshift and for Kubernetes the namespace is io.k8s.

See the Docker custom metadata documentation for details about the format.

LABEL io.openshift.tags   mongodb,mongodb24,nosql

LABEL io.openshift.wants   mongodb,redis

LABEL io.k8s.description The MySQL 5.5 Server with master-slave replication support

LABEL io.openshift.non-scalable     true

LABEL io.openshift.min-memory 16Gi
LABEL io.openshift.min-cpu     4

The build process consists of the following three fundamental elements, which are combined into a final container image:

S2I generates a Dockerfile with the builder image as the first FROM instruction. The Dockerfile generated by S2I is then passed to Buildah.

You can write source-to-image (S2I) scripts in any programming language, as long as the scripts are executable inside the builder image. S2I supports multiple options providing assemble/run/save-artifacts scripts. All of these locations are checked on each build in the following order:

Both the io.openshift.s2i.scripts-url label specified in the image and the script specified in a build configuration can take one of the following forms:

Example S2I scripts

The following example S2I scripts are written in Bash. Each example assumes its tar contents are unpacked into the /tmp/s2i directory.

#!/bin/bash

# restore build artifacts
if [ "$(ls /tmp/s2i/artifacts/ 2>/dev/null)" ]; then
    mv /tmp/s2i/artifacts/* $HOME/.
fi

# move the application source
mv /tmp/s2i/src $HOME/src

# build application artifacts
pushd ${HOME}
make all

# install the artifacts
make install
popd

#!/bin/bash

# run the application
/opt/application/run.sh

#!/bin/bash

pushd ${HOME}
if [ -d deps ]; then
    # all deps contents to tar stream
    tar cf - deps
fi
popd

#!/bin/bash

# inform the user how to use the image
cat <<EOF
This is a S2I sample builder image, to use it, install
https://github.com/openshift/source-to-image
EOF

The standard location for the test script is test/run. This script is invoked by the OpenShift Container Platform S2I image builder and it could be a simple Bash script or a static Go binary.

The test/run script performs the S2I build, so you must have the S2I binary available in your $PATH. If required, follow the installation instructions in the S2I README.

S2I combines the application source code and builder image, so to test it you need a sample application source to verify that the source successfully transforms into a runnable container image. The sample application should be simple, but it should exercise the crucial steps of assemble and run scripts.

The S2I tooling comes with powerful generation tools to speed up the process of creating a new S2I image. The s2i create command produces all the necessary S2I scripts and testing tools along with the Makefile:

$ s2i create _<image name>_ _<destination directory>_

The generated test/run script must be adjusted to be useful, but it provides a good starting point to begin developing.

The easiest way to run the S2I image tests locally is to use the generated Makefile.

If you did not use the s2i create command, you can copy the following Makefile template and replace the IMAGE_NAME parameter with your image name.

IMAGE_NAME = openshift/ruby-20-centos7
CONTAINER_ENGINE := $(shell command -v podman 2> /dev/null | echo docker)

build:
	${CONTAINER_ENGINE} build -t $(IMAGE_NAME) .

.PHONY: test
test:
	${CONTAINER_ENGINE} build -t $(IMAGE_NAME)-candidate .
	IMAGE_NAME=$(IMAGE_NAME)-candidate test/run

The test script assumes you have already built the image you want to test. If required, first build the S2I image. Run one of the following commands:

The following steps describe the default workflow to test S2I image builders:

Running these steps is generally enough to tell if the builder image is working as expected.

Once you have a Dockerfile and the other artifacts that make up your new S2I builder image, you can put them in a git repository and use OpenShift Container Platform to build and push the image. Define a Docker build that points to your repository.

If your OpenShift Container Platform instance is hosted on a public IP address, the build can be triggered each time you push into your S2I builder image GitHub repository.

You can also use the ImageChangeTrigger to trigger a rebuild of your applications that are based on the S2I builder image you updated.

An image stream comprises any number of container images identified by tags. It presents a single virtual view of related images, similar to a container image repository.

By watching an image stream, builds and deployments can receive notifications when new images are added or modified and react by performing a build or deployment, respectively.

An image tag is a label applied to a container image in a repository that distinguishes a specific image from other images in an image stream. Typically, the tag represents a version number of some sort. For example, here :v3.11.59-2 is the tag:

registry.access.redhat.com/openshift3/jenkins-2-rhel7:v3.11.59-2

You can add additional tags to an image. For example, an image might be assigned the tags :v3.11.59-2 and :latest.

OpenShift Container Platform provides the oc tag command, which is similar to the docker tag command, but operates on image streams instead of directly on images.

Images evolve over time and their tags reflect this. Generally, an image tag always points to the latest image built.

If there is too much information embedded in a tag name, like v2.0.1-may-2019, the tag points to just one revision of an image and is never updated. Using default image pruning options, such an image is never removed. In very large clusters, the schema of creating new tags for every revised image could eventually fill up the etcd datastore with excess tag metadata for images that are long outdated.

If the tag is named v2.0, image revisions are more likely. This results in longer tag history and, therefore, the image pruner is more likely to remove old and unused images.

Although tag naming convention is up to you, here are a few examples in the format <image_name>:<image_tag>:

If you require dates in tag names, periodically inspect old and unsupported images and istags and remove them. Otherwise, you can experience increasing resource usage caused by retaining old images.

An image stream in OpenShift Container Platform comprises zero or more container images identified by tags.

There are different types of tags available. The default behavior uses a permanent tag, which points to a specific image in time. If the permanent tag is in use and the source changes, the tag does not change for the destination.

A tracking tag means the destination tag’s metadata is updated during the import of the source tag.

You can remove tags from an image stream.

You can use tags to reference images in image streams using the following reference types.

When viewing example image stream definitions you may notice they contain definitions of ImageStreamTag and references to DockerImage, but nothing related to ImageStreamImage.

This is because the ImageStreamImage objects are automatically created in OpenShift Container Platform when you import or tag an image into the image stream. You should never have to explicitly define an ImageStreamImage object in any image stream definition that you use to create image streams.

When OpenShift Container Platform creates containers, it uses the container imagePullPolicy to determine if the image should be pulled prior to starting the container. There are three possible values for imagePullPolicy:

If a container imagePullPolicy parameter is not specified, OpenShift Container Platform sets it based on the image tag:

When using the OpenShift image registry, to allow pods in project-a to reference images in project-b, a service account in project-a must be bound to the system:image-puller role in project-b.

The .dockercfg $HOME/.docker/config.json file for Docker clients is a Docker credentials file that stores your authentication information if you have previously logged into a secured or insecure registry.

To pull a secured container image that is not from OpenShift image registry, you must create a pull secret from your Docker credentials and add it to your service account.

The Docker credentials file and the associated pull secret can contain multiple references to the same registry, each with its own set of credentials.

{
   "auths":{
      "cloud.openshift.com":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      },
      "quay.io":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      },
      "quay.io/repository-main":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      }
   }
}

apiVersion: v1
data:
  .dockerconfigjson: ewogICAiYXV0aHMiOnsKICAgICAgIm0iOnsKICAgICAgIsKICAgICAgICAgImF1dGgiOiJiM0JsYj0iLAogICAgICAgICAiZW1haWwiOiJ5b3VAZXhhbXBsZS5jb20iCiAgICAgIH0KICAgfQp9Cg==
kind: Secret
metadata:
  creationTimestamp: "2021-09-09T19:10:11Z"
  name: pull-secret
  namespace: default
  resourceVersion: "37676"
  uid: e2851531-01bc-48ba-878c-de96cfe31020
type: Opaque

You can update the global pull secret for your cluster by either replacing the current pull secret or appending a new pull secret.

You can get general information about the image stream and detailed information about all the tags it is pointing to.

You can add additional tags to image streams.

You can add tags for external images.

You can update a tag to reflect another tag in an image stream.

You can remove old tags from an image stream.

See Removing deprecated image stream tags from the Cluster Samples Operator for more information on how the Cluster Samples Operator handles deprecated image stream tags.

When working with an external container image registry, to periodically re-import an image, for example to get latest security updates, you can use the --scheduled flag.

The .dockercfg $HOME/.docker/config.json file for Docker clients is a Docker credentials file that stores your authentication information if you have previously logged into a secured or insecure registry.

To pull a secured container image that is not from OpenShift image registry, you must create a pull secret from your Docker credentials and add it to your service account.

The Docker credentials file and the associated pull secret can contain multiple references to the same registry, each with its own set of credentials.

{
   "auths":{
      "cloud.openshift.com":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      },
      "quay.io":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      },
      "quay.io/repository-main":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      }
   }
}

apiVersion: v1
data:
  .dockerconfigjson: ewogICAiYXV0aHMiOnsKICAgICAgIm0iOnsKICAgICAgIsKICAgICAgICAgImF1dGgiOiJiM0JsYj0iLAogICAgICAgICAiZW1haWwiOiJ5b3VAZXhhbXBsZS5jb20iCiAgICAgIH0KICAgfQp9Cg==
kind: Secret
metadata:
  creationTimestamp: "2021-09-09T19:10:11Z"
  name: pull-secret
  namespace: default
  resourceVersion: "37676"
  uid: e2851531-01bc-48ba-878c-de96cfe31020
type: Opaque

You can add a list of registries, and optionally an individual repository within a registry, that are permitted for image pull and push actions by editing the image.config.openshift.io/cluster custom resource (CR). OpenShift Container Platform applies the changes to this CR to all nodes in the cluster.

When pulling or pushing images, the container runtime searches the registries listed under the registrySources parameter in the image.config.openshift.io/cluster CR. If you created a list of registries under the allowedRegistries parameter, the container runtime searches only those registries. Registries not in the list are blocked.

spec:
  registrySources:
    insecureRegistries:
    - insecure.com
    allowedRegistries:
    - example.com
    - quay.io
    - registry.redhat.io
    - insecure.com
    - image-registry.openshift-image-registry.svc:5000

You can block any registry, and optionally an individual repository within a registry, by editing the image.config.openshift.io/cluster custom resource (CR). OpenShift Container Platform applies the changes to this CR to all nodes in the cluster.

When pulling or pushing images, the container runtime searches the registries listed under the registrySources parameter in the image.config.openshift.io/cluster CR. If you created a list of registries under the blockedRegistries parameter, the container runtime does not search those registries. All other registries are allowed.

You can add insecure registries, and optionally an individual repository within a registry, by editing the image.config.openshift.io/cluster custom resource (CR). OpenShift Container Platform applies the changes to this CR to all nodes in the cluster.

Registries that do not use valid SSL certificates or do not require HTTPS connections are considered insecure.

You can add registries to search for an image short name by editing the image.config.openshift.io/cluster custom resource (CR). OpenShift Container Platform applies the changes to this CR to all nodes in the cluster.

An image short name enables you to search for images without including the fully qualified domain name in the pull spec. For example, you could use rhel7/etcd instead of registry.access.redhat.com/rhe7/etcd.

You might use short names in situations where using the full path is not practical. For example, if your cluster references multiple internal registries whose DNS changes frequently, you would need to update the fully qualified domain names in your pull specs with each change. In this case, using an image short name might be beneficial.

When pulling or pushing images, the container runtime searches the registries listed under the registrySources parameter in the image.config.openshift.io/cluster CR. If you created a list of registries under the containerRuntimeSearchRegistries parameter, when pulling an image with a short name, the container runtime searches those registries.

The Machine Config Operator (MCO) watches the image.config.openshift.io/cluster resource for any changes to the registries. When the MCO detects a change, it drains the nodes, applies the change, and uncordons the nodes. After the nodes return to the Ready state, if the containerRuntimeSearchRegistries parameter is added, the MCO creates a file in the /etc/containers/registries.conf.d directory on each node with the listed registries. The file overrides the default list of unqualified search registries in the /host/etc/containers/registries.conf file. There is no way to fall back to the default list of unqualified search registries.

The containerRuntimeSearchRegistries parameter works only with the Podman and CRI-O container engines. The registries in the list can be used only in pod specs, not in builds and image streams.

The image.config.openshift.io/cluster custom resource can contain a reference to a config map that contains additional certificate authorities to be trusted during image registry access.

The config map key is the hostname of a registry with the port for which this CA is to be trusted, and the PEM certificate content is the value, for each additional registry CA to trust.

apiVersion: v1
kind: ConfigMap
metadata:
  name: my-registry-ca
data:
  registry.example.com: |
    -----BEGIN CERTIFICATE-----
    ...
    -----END CERTIFICATE-----
  registry-with-port.example.com..5000: | 1
    -----BEGIN CERTIFICATE-----
    ...
    -----END CERTIFICATE-----

You can configure additional CAs with the following procedure.

Setting up container registry repository mirroring enables you to do the following:

The attributes of repository mirroring in OpenShift Container Platform include:

Setting up repository mirroring can be done in the following ways:

The following procedure provides a post-installation mirror configuration, where you create an ImageContentSourcePolicy object that identifies:

Labels are used to manage and organize generated objects, such as pods. The labels specified in the template are applied to every object that is generated from the template.

The list of parameters that you can override are listed in the parameters section of the template.

Using the CLI, you can process a file defining a template to return the list of objects to standard output.

A quick start template is a basic example of an application running on OpenShift Container Platform. Quick starts come in a variety of languages and frameworks, and are defined in a template, which is constructed from a set of services, build configurations, and deployment configurations. This template references the necessary images and source repositories to build and deploy the application.

To explore a quick start, create an application from a template. Your administrator must have already installed these templates in your OpenShift Container Platform cluster, in which case you can simply select it from the web console.

Quick starts refer to a source repository that contains the application source code. To customize the quick start, fork the repository and, when creating an application from the template, substitute the default source repository name with your forked repository. This results in builds that are performed using your source code instead of the provided example source. You can then update the code in your source repository and launch a new build to see the changes reflected in the deployed application.

The template description informs you what the template does and helps you find it when searching in the web console. Additional metadata beyond the template name is optional, but useful to have. In addition to general descriptive information, the metadata also includes a set of tags. Useful tags include the name of the language the template is related to for example, Java, PHP, Ruby, and so on.

The following is an example of template description metadata:

kind: Template
apiVersion: template.openshift.io/v1
metadata:
  name: cakephp-mysql-example 1
  annotations:
    openshift.io/display-name: "CakePHP MySQL Example (Ephemeral)" 2
    description: >-
      An example CakePHP application with a MySQL database. For more information
      about using this template, including OpenShift considerations, see
      https://github.com/sclorg/cakephp-ex/blob/master/README.md.


      WARNING: Any data stored will be lost upon pod destruction. Only use this
      template for testing." 3
    openshift.io/long-description: >-
      This template defines resources needed to develop a CakePHP application,
      including a build configuration, application DeploymentConfig, and
      database DeploymentConfig.  The database is stored in
      non-persistent storage, so this configuration should be used for
      experimental purposes only. 4
    tags: "quickstart,php,cakephp" 5
    iconClass: icon-php 6
    openshift.io/provider-display-name: "Red Hat, Inc." 7
    openshift.io/documentation-url: "https://github.com/sclorg/cakephp-ex" 8
    openshift.io/support-url: "https://access.redhat.com" 9
message: "Your admin credentials are ${ADMIN_USERNAME}:${ADMIN_PASSWORD}" 10

Templates can include a set of labels. These labels are added to each object created when the template is instantiated. Defining a label in this way makes it easy for users to find and manage all the objects created from a particular template.

The following is an example of template object labels:

kind: "Template"
apiVersion: "v1"
...
labels:
  template: "cakephp-mysql-example" 1
  app: "${NAME}" 2

Parameters allow a value to be supplied by you or generated when the template is instantiated. Then, that value is substituted wherever the parameter is referenced. References can be defined in any field in the objects list field. This is useful for generating random passwords or allowing you to supply a hostname or other user-specific value that is required to customize the template. Parameters can be referenced in two ways:

When using the ${PARAMETER_NAME} syntax, multiple parameter references can be combined in a single field and the reference can be embedded within fixed data, such as "http://${PARAMETER_1}${PARAMETER_2}". Both parameter values are substituted and the resulting value is a quoted string.

When using the ${{PARAMETER_NAME}} syntax only a single parameter reference is allowed and leading and trailing characters are not permitted. The resulting value is unquoted unless, after substitution is performed, the result is not a valid JSON object. If the result is not a valid JSON value, the resulting value is quoted and treated as a standard string.

A single parameter can be referenced multiple times within a template and it can be referenced using both substitution syntaxes within a single template.

A default value can be provided, which is used if you do not supply a different value:

The following is an example of setting an explicit value as the default value:

parameters:
  - name: USERNAME
    description: "The user name for Joe"
    value: joe

Parameter values can also be generated based on rules specified in the parameter definition, for example generating a parameter value:

parameters:
  - name: PASSWORD
    description: "The random user password"
    generate: expression
    from: "[a-zA-Z0-9]{12}"

In the previous example, processing generates a random password 12 characters long consisting of all upper and lowercase alphabet letters and numbers.

The syntax available is not a full regular expression syntax. However, you can use \w, \d, \a, and \A modifiers:

  parameters:
  - name: singlequoted_example
    generate: expression
    from: '[\A]{10}'
  - name: doublequoted_example
    generate: expression
    from: "[\\A]{10}"

{
    "parameters": [
       {
        "name": "json_example",
        "generate": "expression",
        "from": "[\\A]{10}"
       }
    ]
}

Here is an example of a full template with parameter definitions and references:

kind: Template
apiVersion: template.openshift.io/v1
metadata:
  name: my-template
objects:
  - kind: BuildConfig
    apiVersion: build.openshift.io/v1
    metadata:
      name: cakephp-mysql-example
      annotations:
        description: Defines how to build the application
    spec:
      source:
        type: Git
        git:
          uri: "${SOURCE_REPOSITORY_URL}" 1
          ref: "${SOURCE_REPOSITORY_REF}"
        contextDir: "${CONTEXT_DIR}"
  - kind: DeploymentConfig
    apiVersion: apps.openshift.io/v1
    metadata:
      name: frontend
    spec:
      replicas: "${{REPLICA_COUNT}}" 2
parameters:
  - name: SOURCE_REPOSITORY_URL 3
    displayName: Source Repository URL 4
    description: The URL of the repository with your application source code 5
    value: https://github.com/sclorg/cakephp-ex.git 6
    required: true 7
  - name: GITHUB_WEBHOOK_SECRET
    description: A secret string used to configure the GitHub webhook
    generate: expression 8
    from: "[a-zA-Z0-9]{40}" 9
  - name: REPLICA_COUNT
    description: Number of replicas to run
    value: "2"
    required: true
message: "... The GitHub webhook secret is ${GITHUB_WEBHOOK_SECRET} ..." 10

The main portion of the template is the list of objects which is created when the template is instantiated. This can be any valid API object, such as a build configuration, deployment configuration, or service. The object is created exactly as defined here, with any parameter values substituted in prior to creation. The definition of these objects can reference parameters defined earlier.

The following is an example of an object list:

kind: "Template"
apiVersion: "v1"
metadata:
  name: my-template
objects:
  - kind: "Service" 1
    apiVersion: "v1"
    metadata:
      name: "cakephp-mysql-example"
      annotations:
        description: "Exposes and load balances the application pods"
    spec:
      ports:
        - name: "web"
          port: 8080
          targetPort: 8080
      selector:
        name: "cakephp-mysql-example"

The Template Service Broker advertises one service in its catalog for each template object of which it is aware. By default, each of these services is advertised as being bindable, meaning an end user is permitted to bind against the provisioned service.

Template authors can indicate that fields of particular objects in a template should be exposed. The Template Service Broker recognizes exposed fields on ConfigMap, Secret, Service, and Route objects, and returns the values of the exposed fields when a user binds a service backed by the broker.

To expose one or more fields of an object, add annotations prefixed by template.openshift.io/expose- or template.openshift.io/base64-expose- to the object in the template.

Each annotation key, with its prefix removed, is passed through to become a key in a bind response.

Each annotation value is a Kubernetes JSONPath expression, which is resolved at bind time to indicate the object field whose value should be returned in the bind response.

The following is an example of different objects' fields being exposed:

kind: Template
apiVersion: template.openshift.io/v1
metadata:
  name: my-template
objects:
- kind: ConfigMap
  apiVersion: v1
  metadata:
    name: my-template-config
    annotations:
      template.openshift.io/expose-username: "{.data['my\\.username']}"
  data:
    my.username: foo
- kind: Secret
  apiVersion: v1
  metadata:
    name: my-template-config-secret
    annotations:
      template.openshift.io/base64-expose-password: "{.data['password']}"
  stringData:
    password: <password>
- kind: Service
  apiVersion: v1
  metadata:
    name: my-template-service
    annotations:
      template.openshift.io/expose-service_ip_port: "{.spec.clusterIP}:{.spec.ports[?(.name==\"web\")].port}"
  spec:
    ports:
    - name: "web"
      port: 8080
- kind: Route
  apiVersion: route.openshift.io/v1
  metadata:
    name: my-template-route
    annotations:
      template.openshift.io/expose-uri: "http://{.spec.host}{.spec.path}"
  spec:
    path: mypath

An example response to a bind operation given the above partial template follows:

{
  "credentials": {
    "username": "foo",
    "password": "YmFy",
    "service_ip_port": "172.30.12.34:8080",
    "uri": "http://route-test.router.default.svc.cluster.local/mypath"
  }
}

Template authors can indicate that certain objects within a template should be waited for before a template instantiation by the service catalog, Template Service Broker, or TemplateInstance API is considered complete.

To use this feature, mark one or more objects of kind Build, BuildConfig, Deployment, DeploymentConfig, Job, or StatefulSet in a template with the following annotation:

"template.alpha.openshift.io/wait-for-ready": "true"

Template instantiation is not complete until all objects marked with the annotation report ready. Similarly, if any of the annotated objects report failed, or if the template fails to become ready within a fixed timeout of one hour, the template instantiation fails.

For the purposes of instantiation, readiness and failure of each object kind are defined as follows:

The following is an example template extract, which uses the wait-for-ready annotation. Further examples can be found in the OpenShift Container Platform quick start templates.

kind: Template
apiVersion: template.openshift.io/v1
metadata:
  name: my-template
objects:
- kind: BuildConfig
  apiVersion: build.openshift.io/v1
  metadata:
    name: ...
    annotations:
      # wait-for-ready used on BuildConfig ensures that template instantiation
      # will fail immediately if build fails
      template.alpha.openshift.io/wait-for-ready: "true"
  spec:
    ...
- kind: DeploymentConfig
  apiVersion: apps.openshift.io/v1
  metadata:
    name: ...
    annotations:
      template.alpha.openshift.io/wait-for-ready: "true"
  spec:
    ...
- kind: Service
  apiVersion: v1
  metadata:
    name: ...
  spec:
    ...

Rather than writing an entire template from scratch, you can export existing objects from your project in YAML form, and then modify the YAML from there by adding parameters and other customizations as template form.

Since Rails 4 no longer serves a static public/index.html page in production, you must create a new root page.

To have a custom welcome page must do following steps:

Rails offers a generator that completes all necessary steps for you.

To have your application communicate with the PostgreSQL database service running in OpenShift Container Platform you must edit the default section in your config/database.yml to use environment variables, which you must define later, upon the database service creation.

Building an application in OpenShift Container Platform usually requires that the source code be stored in a git repository, so you must install git if you do not already have it.

Your Rails application expects a running database service. For this service use PostgreSQL database image.

To create the database service, use the oc new-app command. To this command you must pass some necessary environment variables which are used inside the database container. These environment variables are required to set the username, password, and name of the database. You can change the values of these environment variables to anything you would like. The variables are as follows:

Setting these variables ensures:

To bring your application to OpenShift Container Platform, you must specify a repository in which your application lives.

You can expose a service to create a route for your application.

You can manage Jenkins authentication in two ways:

The Jenkins server can be configured with the following environment variables:

If you are going to run Jenkins somewhere other than your same project, you must provide an access token to Jenkins to access your project.

The Jenkins image can be run with mounted volumes to enable persistent storage for the configuration:

To customize the official OpenShift Container Platform Jenkins image, you can use the image as a source-to-image (S2I) builder.

You can use S2I to copy your custom Jenkins jobs definitions, add additional plugins, or replace the provided config.xml file with your own, custom, configuration.

To include your modifications in the Jenkins image, you must have a Git repository with the following directory structure:

pluginId:pluginVersion

The contents of the configuration/ directory is copied to the /var/lib/jenkins/ directory, so you can also include additional files, such as credentials.xml, there.

apiVersion: build.openshift.io/v1
kind: BuildConfig
metadata:
  name: custom-jenkins-build
spec:
  source:                       1
    git:
      uri: https://github.com/custom/repository
    type: Git
  strategy:                     2
    sourceStrategy:
      from:
        kind: ImageStreamTag
        name: jenkins:2
        namespace: openshift
    type: Source
  output:                       3
    to:
      kind: ImageStreamTag
      name: custom-jenkins:latest

The OpenShift Container Platform Jenkins image includes the pre-installed Kubernetes plugin that allows Jenkins agents to be dynamically provisioned on multiple container hosts using Kubernetes and OpenShift Container Platform.

To use the Kubernetes plugin, OpenShift Container Platform provides images that are suitable for use as Jenkins agents, including the Base, Maven, and Node.js images.

Both the Maven and Node.js agent images are automatically configured as Kubernetes pod template images within the OpenShift Container Platform Jenkins image configuration for the Kubernetes plugin. That configuration includes labels for each of the images that can be applied to any of your Jenkins jobs under their Restrict where this project can be run setting. If the label is applied, jobs run under an OpenShift Container Platform pod running the respective agent image.

The Jenkins image also provides auto-discovery and auto-configuration of additional agent images for the Kubernetes plugin.

With the OpenShift Container Platform sync plugin, the Jenkins image on Jenkins startup searches for the following within the project that it is running or the projects specifically listed in the plugin’s configuration:

When it finds an image stream with the appropriate label, or image stream tag with the appropriate annotation, it generates the corresponding Kubernetes plugin configuration so you can assign your Jenkins jobs to run in a pod that runs the container image that is provided by the image stream.

The name and image references of the image stream or image stream tag are mapped to the name and image fields in the Kubernetes plugin pod template. You can control the label field of the Kubernetes plugin pod template by setting an annotation on the image stream or image stream tag object with the key agent-label. Otherwise, the name is used as the label.

When it finds a config map with the appropriate label, it assumes that any values in the key-value data payload of the config map contain Extensible Markup Language (XML) that is consistent with the configuration format for Jenkins and the Kubernetes plugin pod templates. One key benefit of using config maps, rather than image streams or image stream tags, is that you can control all the parameters of the Kubernetes plugin pod template.

kind: ConfigMap
apiVersion: v1
metadata:
  name: jenkins-agent
  labels:
    role: jenkins-agent
data:
  template1: |-
    <org.csanchez.jenkins.plugins.kubernetes.PodTemplate>
      <inheritFrom></inheritFrom>
      <name>template1</name>
      <instanceCap>2147483647</instanceCap>
      <idleMinutes>0</idleMinutes>
      <label>template1</label>
      <serviceAccount>jenkins</serviceAccount>
      <nodeSelector></nodeSelector>
      <volumes/>
      <containers>
        <org.csanchez.jenkins.plugins.kubernetes.ContainerTemplate>
          <name>jnlp</name>
          <image>openshift/jenkins-agent-maven-35-centos7:v3.10</image>
          <privileged>false</privileged>
          <alwaysPullImage>true</alwaysPullImage>
          <workingDir>/tmp</workingDir>
          <command></command>
          <args>${computer.jnlpmac} ${computer.name}</args>
          <ttyEnabled>false</ttyEnabled>
          <resourceRequestCpu></resourceRequestCpu>
          <resourceRequestMemory></resourceRequestMemory>
          <resourceLimitCpu></resourceLimitCpu>
          <resourceLimitMemory></resourceLimitMemory>
          <envVars/>
        </org.csanchez.jenkins.plugins.kubernetes.ContainerTemplate>
      </containers>
      <envVars/>
      <annotations/>
      <imagePullSecrets/>
      <nodeProperties/>
    </org.csanchez.jenkins.plugins.kubernetes.PodTemplate>

The following example shows two containers that reference image streams that are present in the openshift namespace. One container handles the JNLP contract for launching Pods as Jenkins Agents. The other container uses an image with tools for building code in a particular coding language:

kind: ConfigMap
apiVersion: v1
metadata:
  name: jenkins-agent
  labels:
    role: jenkins-agent
data:
  template2: |-
        <org.csanchez.jenkins.plugins.kubernetes.PodTemplate>
          <inheritFrom></inheritFrom>
          <name>template2</name>
          <instanceCap>2147483647</instanceCap>
          <idleMinutes>0</idleMinutes>
          <label>template2</label>
          <serviceAccount>jenkins</serviceAccount>
          <nodeSelector></nodeSelector>
          <volumes/>
          <containers>
            <org.csanchez.jenkins.plugins.kubernetes.ContainerTemplate>
              <name>jnlp</name>
              <image>image-registry.openshift-image-registry.svc:5000/openshift/jenkins-agent-base:latest</image>
              <privileged>false</privileged>
              <alwaysPullImage>true</alwaysPullImage>
              <workingDir>/home/jenkins/agent</workingDir>
              <command></command>
              <args>\$(JENKINS_SECRET) \$(JENKINS_NAME)</args>
              <ttyEnabled>false</ttyEnabled>
              <resourceRequestCpu></resourceRequestCpu>
              <resourceRequestMemory></resourceRequestMemory>
              <resourceLimitCpu></resourceLimitCpu>
              <resourceLimitMemory></resourceLimitMemory>
              <envVars/>
            </org.csanchez.jenkins.plugins.kubernetes.ContainerTemplate>
            <org.csanchez.jenkins.plugins.kubernetes.ContainerTemplate>
              <name>java</name>
              <image>image-registry.openshift-image-registry.svc:5000/openshift/java:latest</image>
              <privileged>false</privileged>
              <alwaysPullImage>true</alwaysPullImage>
              <workingDir>/home/jenkins/agent</workingDir>
              <command>cat</command>
              <args></args>
              <ttyEnabled>true</ttyEnabled>
              <resourceRequestCpu></resourceRequestCpu>
              <resourceRequestMemory></resourceRequestMemory>
              <resourceLimitCpu></resourceLimitCpu>
              <resourceLimitMemory></resourceLimitMemory>
              <envVars/>
            </org.csanchez.jenkins.plugins.kubernetes.ContainerTemplate>
          </containers>
          <envVars/>
          <annotations/>
          <imagePullSecrets/>
          <nodeProperties/>
        </org.csanchez.jenkins.plugins.kubernetes.PodTemplate>

After it is installed, the OpenShift Container Platform Sync plugin monitors the API server of OpenShift Container Platform for updates to image streams, image stream tags, and config maps and adjusts the configuration of the Kubernetes plugin.

The following rules apply:

To use a container image as a Jenkins agent, the image must run the agent as an entry point. For more details, see the official Jenkins documentation.

If in the config map the <serviceAccount> element of the pod template XML is the OpenShift Container Platform service account used for the resulting pod, the service account credentials are mounted into the pod. The permissions are associated with the service account and control which operations against the OpenShift Container Platform master are allowed from the pod.

Consider the following scenario with service accounts used for the pod, which is launched by the Kubernetes Plugin that runs in the OpenShift Container Platform Jenkins image.

If you use the example template for Jenkins that is provided by OpenShift Container Platform, the jenkins service account is defined with the edit role for the project Jenkins runs in, and the master Jenkins pod has that service account mounted.

The two default Maven and NodeJS pod templates that are injected into the Jenkins configuration are also set to use the same service account as the Jenkins master.

Templates provide parameter fields to define all the environment variables with predefined default values. OpenShift Container Platform provides templates to make creating a new Jenkins service easy. The Jenkins templates should be registered in the default openshift project by your cluster administrator during the initial cluster setup.

The two available templates both define deployment configuration and a service. The templates differ in their storage strategy, which affects whether the Jenkins content persists across a pod restart.

To use a PV store, the cluster administrator must define a PV pool in the OpenShift Container Platform deployment.

After you select which template you want, you must instantiate the template to be able to use Jenkins.

With both templates, you can run oc describe on them to see all the parameters available for overriding.

For example:

$ oc describe jenkins-ephemeral

In the following example, the openshift-jee-sample BuildConfig object causes a Jenkins Maven agent pod to be dynamically provisioned. The pod clones some Java source code, builds a WAR file, and causes a second BuildConfig, openshift-jee-sample-docker to run. The second BuildConfig layers the new WAR file into a container image.

kind: List
apiVersion: v1
items:
- kind: ImageStream
  apiVersion: image.openshift.io/v1
  metadata:
    name: openshift-jee-sample
- kind: BuildConfig
  apiVersion: build.openshift.io/v1
  metadata:
    name: openshift-jee-sample-docker
  spec:
    strategy:
      type: Docker
    source:
      type: Docker
      dockerfile: |-
        FROM openshift/wildfly-101-centos7:latest
        COPY ROOT.war /wildfly/standalone/deployments/ROOT.war
        CMD $STI_SCRIPTS_PATH/run
      binary:
        asFile: ROOT.war
    output:
      to:
        kind: ImageStreamTag
        name: openshift-jee-sample:latest
- kind: BuildConfig
  apiVersion: build.openshift.io/v1
  metadata:
    name: openshift-jee-sample
  spec:
    strategy:
      type: JenkinsPipeline
      jenkinsPipelineStrategy:
        jenkinsfile: |-
          node("maven") {
            sh "git clone https://github.com/openshift/openshift-jee-sample.git ."
            sh "mvn -B -Popenshift package"
            sh "oc start-build -F openshift-jee-sample-docker --from-file=target/ROOT.war"
          }
    triggers:
    - type: ConfigChange

It is also possible to override the specification of the dynamically created Jenkins agent pod. The following is a modification to the preceding example, which overrides the container memory and specifies an environment variable.

kind: BuildConfig
apiVersion: build.openshift.io/v1
metadata:
  name: openshift-jee-sample
spec:
  strategy:
    type: JenkinsPipeline
    jenkinsPipelineStrategy:
      jenkinsfile: |-
        podTemplate(label: "mypod", 1
                    cloud: "openshift", 2
                    inheritFrom: "maven", 3
                    containers: [
            containerTemplate(name: "jnlp", 4
                              image: "openshift/jenkins-agent-maven-35-centos7:v3.10", 5
                              resourceRequestMemory: "512Mi", 6
                              resourceLimitMemory: "512Mi", 7
                              envVars: [
              envVar(key: "CONTAINER_HEAP_PERCENT", value: "0.25") 8
            ])
          ]) {
          node("mypod") { 9
            sh "git clone https://github.com/openshift/openshift-jee-sample.git ."
            sh "mvn -B -Popenshift package"
            sh "oc start-build -F openshift-jee-sample-docker --from-file=target/ROOT.war"
          }
        }
  triggers:
  - type: ConfigChange

By default, the pod is deleted when the build completes. This behavior can be modified with the plugin or within a pipeline Jenkinsfile.

Upstream Jenkins has more recently introduced a YAML declarative format for defining a podTemplate pipeline DSL in-line with your pipelines. An example of this format, using the sample java-builder pod template that is defined in the OpenShift Container Platform Jenkins image:

def nodeLabel = 'java-buidler'

pipeline {
  agent {
    kubernetes {
      cloud 'openshift'
      label nodeLabel
      yaml """
apiVersion: v1
kind: Pod
metadata:
  labels:
    worker: ${nodeLabel}
spec:
  containers:
  - name: jnlp
    image: image-registry.openshift-image-registry.svc:5000/openshift/jenkins-agent-base:latest
    args: ['\$(JENKINS_SECRET)', '\$(JENKINS_NAME)']
  - name: java
    image: image-registry.openshift-image-registry.svc:5000/openshift/java:latest
    command:
    - cat
    tty: true
"""
    }
  }

  options {
    timeout(time: 20, unit: 'MINUTES')
  }

  stages {
    stage('Build App') {
      steps {
        container("java") {
          sh "mvn --version"
        }
     }
    }
  }
}

When deployed by the provided Jenkins Ephemeral or Jenkins Persistent templates, the default memory limit is 1 Gi.

By default, all other process that run in the Jenkins container cannot use more than a total of 512 MiB of memory. If they require more memory, the container halts. It is therefore highly recommended that pipelines run external commands in an agent container wherever possible.

And if Project quotas allow for it, see recommendations from the Jenkins documentation on what a Jenkins master should have from a memory perspective. Those recommendations proscribe to allocate even more memory for the Jenkins master.

It is recommended to specify memory request and limit values on agent containers created by the Jenkins Kubernetes plugin. Admin users can set default values on a per-agent image basis through the Jenkins configuration. The memory request and limit parameters can also be overridden on a per-container basis.

You can increase the amount of memory available to Jenkins by overriding the MEMORY_LIMIT parameter when instantiating the Jenkins Ephemeral or Jenkins Persistent template.

The OpenShift Container Platform Jenkins agent images are available on Quay.io or registry.redhat.io.

Jenkins images are available through the Red Hat Registry:

$ docker pull registry.redhat.io/openshift4/ose-jenkins:<v4.5.0>

$ docker pull registry.redhat.io/openshift4/jenkins-agent-nodejs-10-rhel7:<v4.5.0>

$ docker pull registry.redhat.io/openshift4/jenkins-agent-nodejs-12-rhel7:<v4.5.0>

$ docker pull registry.redhat.io/openshift4/ose-jenkins-agent-maven:<v4.5.0>

$ docker pull registry.redhat.io/openshift4/ose-jenkins-agent-base:<v4.5.0>

To use these images, you can either access them directly from Quay.io or registry.redhat.io or push them into your OpenShift Container Platform container image registry.

Each Jenkins agent container can be configured with the following environment variables.

A JVM is used in all Jenkins agents to host the Jenkins JNLP agent as well as to run any Java applications such as javac, Maven, or Gradle.

By default, the Jenkins JNLP agent JVM uses 50% of the container memory limit for its heap. This value can be modified by the CONTAINER_HEAP_PERCENT environment variable. It can also be capped at an upper limit or overridden entirely.

By default, any other processes run in the Jenkins agent container, such as shell scripts or oc commands run from pipelines, cannot use more than the remaining 50% memory limit without provoking an OOM kill.

By default, each further JVM process that runs in a Jenkins agent container uses up to 25% of the container memory limit for its heap. It might be necessary to tune this limit for many build workloads.

Hosting Gradle builds in the Jenkins agent on OpenShift Container Platform presents additional complications because in addition to the Jenkins JNLP agent and Gradle JVMs, Gradle spawns a third JVM to run tests if they are specified.

The following settings are suggested as a starting point for running Gradle builds in a memory constrained Jenkins agent on OpenShift Container Platform. You can modify these settings as required.

Jenkins agent pods, are deleted by default after the build completes or is stopped. This behavior can be changed by the Kubernetes plugin pod retention setting. Pod retention can be set for all Jenkins builds, with overrides for each pod template. The following behaviors are supported:

You can override pod retention in the pipeline Jenkinsfile:

podTemplate(label: "mypod",
  cloud: "openshift",
  inheritFrom: "maven",
  podRetention: onFailure(), 1
  containers: [
    ...
  ]) {
  node("mypod") {
    ...
  }
}

Source-to-image (S2I) produces ready-to-run images by injecting source code into a container that prepares that source code to be run. It performs the following steps:

Buildah then creates the container image.

Builder images provide their own version of the source-to-image (S2I) scripts that cover the most common use-cases. If these scripts do not fulfill your needs, S2I provides a way of overriding them by adding custom ones in the .s2i/bin directory. However, by doing this, you are completely replacing the standard scripts. In some cases, replacing the scripts is acceptable, but, in other scenarios, you can run a few commands before or after the scripts while retaining the logic of the script provided in the image. To reuse the standard scripts, you can create a wrapper script that runs custom logic and delegates further work to the default scripts in the image.