Questo contenuto non è disponibile nella lingua selezionata.

3.7. Configuring IP Networking from the Kernel Command line


When connecting to the root file system on an iSCSI target from an interface, the network settings are not configured on the installed system. For solution of this problem:
  1. Install the dracut utility. For information on using dracut, see Red Hat Enterprise Linux System Administrator's Guide
  2. Set the configuration using the ip option on the kernel command line:
    ip<client-IP-number>:[<server-id>]:<gateway-IP-number>:<netmask>:<client-hostname>:<interface>:{dhcp|dhcp6|auto6|on|any|none|off}
    • dhcp - DHCP configuration
    • dhpc6 - DHCP IPv6 configuration
    • auto6 - automatic IPv6 configuration
    • on, any - any protocol available in the kernel (default)
    • none, off - no autoconfiguration, static network configuration
    For example:
    ip=192.168.180.120:192.168.180.100:192.168.180.1:255.255.255.0::enp1s0:off
  3. Set the name server configuration:
    nameserver=srv1 [nameserver=srv2 [nameserver=srv3 […]]]
The dracut utility sets up a network connection and generates new ifcfg files that can be copied to the /etc/sysconfig/network-scripts/ file.
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni sulla documentazione di Red Hat

Legal Notice

Theme

© 2026 Red Hat
Torna in cima