Questo contenuto non è disponibile nella lingua selezionata.

Chapter 17. Enabling kdump


For your RHEL 8 systems, you can configure enabling or disabling the kdump functionality on a specific kernel or on all installed kernels. However, you must routinely test the kdump functionality and validate its working status.

17.1. Enabling kdump for all installed kernels

The kdump service starts by enabling kdump.service after the kexec tool is installed. You can enable and start the kdump service for all kernels installed on the machine.

Prerequisites

  • You have administrator privileges.

Procedure

  1. Add the crashkernel= command-line parameter to all installed kernels:

    # grubby --update-kernel=ALL --args="crashkernel=xxM"

    xxM is the required memory in megabytes.

  2. Enable the kdump service:

    # systemctl enable --now kdump.service

Verification

  • Check that the kdump service is running:

    # systemctl status kdump.service
    
    ○ kdump.service - Crash recovery kernel arming
         Loaded: loaded (/usr/lib/systemd/system/kdump.service; enabled; vendor preset: disabled)
         Active: active (live)

17.2. Enabling kdump for a specific installed kernel

You can enable the kdump service for a specific kernel on the machine.

Prerequisites

  • You have administrator privileges.

Procedure

  1. List the kernels installed on the machine.

    # ls -a /boot/vmlinuz-*
    /boot/vmlinuz-0-rescue-2930657cd0dc43c2b75db480e5e5b4a9
    /boot/vmlinuz-4.18.0-330.el8.x86_64
    /boot/vmlinuz-4.18.0-330.rt7.111.el8.x86_64
  2. Add a specific kdump kernel to the system’s Grand Unified Bootloader (GRUB) configuration.

    For example:

    # grubby --update-kernel=vmlinuz-4.18.0-330.el8.x86_64 --args="crashkernel=xxM"

    xxM is the required memory reserve in megabytes.

  3. Enable the kdump service.

    # systemctl enable --now kdump.service

Verification

  • Check that the kdump service is running.

    # systemctl status kdump.service
    
    ○ kdump.service - Crash recovery kernel arming
         Loaded: loaded (/usr/lib/systemd/system/kdump.service; enabled; vendor preset: disabled)
         Active: active (live)

17.3. Disabling the kdump service

You can stop the kdump.service and disable the service from starting on your RHEL 8 systems.

Prerequisites

Procedure

  1. To stop the kdump service in the current session:

    # systemctl stop kdump.service
  2. To disable the kdump service:

    # systemctl disable kdump.service
Warning

It is recommended to set kptr_restrict=1 as default. When kptr_restrict is set to (1) as default, the kdumpctl service loads the crash kernel regardless of whether the Kernel Address Space Layout (KASLR) is enabled.

If kptr_restrict is not set to 1 and KASLR is enabled, the contents of /proc/kore file are generated as all zeros. The kdumpctl service fails to access the /proc/kcore file and load the crash kernel. The kexec-kdump-howto.txt file displays a warning message, which recommends you to set kptr_restrict=1. Verify for the following in the sysctl.conf file to ensure that kdumpctl service loads the crash kernel:

  • Kernel kptr_restrict=1 in the sysctl.conf file.

Additional resources

Red Hat logoGithubRedditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita ilBlog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

© 2024 Red Hat, Inc.