Red Hat Summit Red Hat Summitサポートコンソール開発者トライアルの開始お問い合わせ

このコンテンツは選択した言語では利用できません。

5.2 Release Notes

Red Hat Enterprise Linux 5

Release Notes for Red Hat Enterprise Linux 5.2

Logo

Abstract

The Release Notes provide high-level coverage of the improvements and additions that have been implemented in Red Hat Enterprise Linux 5.2. For detailed documentation on all changes to Red Hat Enterprise Linux for the 5.2 update, refer to the Technical Notes.

1. Release Notes Updates

This section contains information about Red Hat Enterprise Linux 5.2 that did not make it into the Release Notes included in the distribution.

1.1. All Architectures

  • Thin Provisioning (also known as "virtual provisioning") will be first released with EMC Symmetrix DMX3 and DMX4. Please refer to the EMC Support Matrix and Symmetrix Enginuity code release notes for further details.
  • dom0 has a system-wide IRQ (interrupt request line) limit of 256, which is consumed as follows:
    • 3 per physical CPU.
    • 1 per guest device (i.e. NIC or block device)
    When the IRQ limit is reached, the system will crash. As such, check your IRQ consumption to make sure that the number of guests you create (and their respective block devices) do not exhaust the IRQ limit.
    To determine how many IRQs you are currently consuming, run the command grep Dynamic-irq /proc/interrupts | wc -l.
  • In /etc/multipath.conf, setting max_fds to unlimited will prevent the multipathd daemon from starting up properly. As such, you should use a sufficiently high value instead for this setting.
  • When provisioning guests during installation, the RHN tools for guests option will not be available. When this occurs, the system will require an additional entitlement, separate from the entitlement used by dom0.
    To prevent the consumption of additional entitlements for guests, install the rhn-virtualization-common package manually before attempting to register the system to Red Hat Network.
  • virt-manager should not be left running continuously, as its memory use will grow over time. This could cause memory starvation.
    As such, you should only use virt-manager when needed. When extended use is required, it is advisable to periodically exit and restart virt-manager.
  • Network driver r8169 updated to add support for the following devices:
    • RTL8169sb/8110sb
    • RTL8169sc/8110sc
    • RTL8168b/8111b
    • RTL8101e
    • RTL8100e
  • The crash utility cannot be used to analyze kdump-generated x86_64 vmcores using the xen-syms-[release] binary of the Red Hat Enterprise Linux 5.2 kernel. To read these types of vmcores, use the command crash --xen_phys_start [address] /boot/xen-syms-[version] vmcore instead.
    To determine the value of [address], run the command cat /proc/iomem | grep Hypervisor. Something similar to the following output should appear:
    Copy to Clipboard Toggle word wrap 
    3ee00000-3fdfffff : Hypervisor code and data
    The [address] is the first number in the stated range; in this case, it is 3ee00000.
  • When installing Red Hat Enterprise Linux 5 on a guest, the guest is configured to explicitly use a temporary installation kernel provided by dom0. Once installation finishes, it can then use its own bootloader. However, this can only be achieved by forcing the guest's first reboot to be a shutdown.
    As such, when the Reboot button appears at the end of the guest installation, clicking it shuts down the guest, but does not reboot it. This is an expected behavior.
    Note that when you boot the guest after this it will then use its own bootloader.
  • Running rpmbuild on the compiz source RPM will fail if any KDE or qt development packages (for example, qt-devel) are installed. This is caused by a bug in the compiz configuration script.
    To work around this, remove any KDE or qt development packages before attempting to build the compiz package from its source RPM.
  • If your system has either ATI Radeon R500 or R600 graphics card equipped, firstboot will not run after installation. The system will go directly to the graphical login screen and skip firstboot altogether. If you attempt to run firstboot manually (i.e. from a failsafe terminal), the X session will crash.
    This issue is caused by the driver used by the ATI Radeon R500/R600 hardware. The default driver used by these graphics cards are still in technology preview. To work around this, backup your /etc/X11/xorg.conf file; then, configure X to use the supported vesa driver instead using the following command:
    system-config-display --reconfig --set-driver=vesa
    You can now run firstboot. To switch back to your old settings, restore your original /etc/X11/xorg.conf.
  • nfsroot is fully supported in this update. This allows users to run Red Hat Enterprise Linux 5.2 with its root file system (/) mounted via NFS.
    nfsroot was originally introduced in Red Hat Enterprise Linux 5 as a subset of the Technology Preview feature Stateless Linux. The full implementation of Stateless Linux remains a Technology Preview.
    At present, nfsroot has the following restrictions:
    • Writable directories that hold system files (for example, /tmp, /var, and /etc) must be replicated for each client and mounted independently with no sharing between clients. To do so, perform the following steps:
      1. Configure the client's root file system to boot in read-only mode. To do so, set READONLY to yes in /etc/sysconfig/readonly-root.
      2. Run cat /etc/rwtab to view a default list of directories and files mounted by each client in the format [type] [path].
        [type] can be either empty (an empty path), dirs (a directory tree that is copied, but is empty), or files (a file or directory tree copied intact).
      3. If any other files or directories need to writable but are not in /etc/rwtab, list them in the same format (i.e. [type] [path]) in a file under /etc/rwtab.d/. You may use any filename for this file.
    • SWAP is not supported over NFS.
    • SELinux cannot be enabled on nfsroot clients. In general, Red Hat does not recommend disabling SELinux. As such, customers must carefully consider the security implications of this action.
  • Installing Red Hat Enterprise Linux 5.2 on a system with multiple network interfaces and manually specified IPv6 addresses may result in a partially incorrect networking setup. When this occurs, your IPv6 settings will not be visible on the installed system.
    To work around this, set NETWORKING_IPV6 to yes in /etc/sysconfig/network. Then, restart your network connection using the command service network restart.
  • If your system uses the TSC timer, the gettimeofday system call may move backwards. This is because of an overflow issue that causes the TSC timer to jump forward significantly in some cases; when this occurs, the TSC timer will correct itself, but will ultimately register a movement backwards in time.
    This issue is particularly critical for time-sensitive systems, such as those used for transaction systems and databases. As such, if your system needs precision timing, Red Hat strongly recommends that you set the kernel to use another timer (for example, HPET).
  • The READ_AHEAD setting in the cciss driver is now removed. The cciss driver will now use the block layer default of 256. Testing has shown that the setting READ_AHEAD=1024 did not result in a consistent improvement in performance; in some situations, this setting could also cause the system to hang.
  • When multiple NFSv4 clients are repeatedly competing for read/write access to the same file on the NFS server, it is possible for one or more of those clients to stall for an indefinite period of time waiting for access. This occurs because the standard delay observed when failing to get an access delegation from the server is long enough for the client who currently owns such delegation to return it to the server and claim it back again.
  • If your system has yum-rhn-plugin-0.5.2-5.el5_1.2 (or an earlier version) installed, you will be unable to upgrade to Red Hat Enterprise Linux 5.2 through yum update. To work around this, upgrade your yum-rhn-plugin to the latest version (using yum update yum-rhn-plugin) before running yum update.
  • If your system has an older version of the gfs2-kmod package installed but the yum-kmod package is not installed, upgrading from Red Hat Enterprise Linux 5.1 to 5.2 will fail. To prevent this, install the latest version of yum-kmod first (using yum install yum-kmod) before running yum update.
  • Thanks to the help of upstream developers and testing customers, the FS-Cache feature has undergone significant changes in line with upstream FS-Cache implementation. Consequently, the technology preview implementation of FS-Cache in this release is now rendered obsolete.
    As such, Red Hat does not recommend the usage of FS-Cache. Note that FS-Cache will also be likely disabled for the next minor releases.
    Red Hat will be focusing on further refining this feature as per upstream specifications. Once an acceptable level of invasiveness and compatibility is reached, FS-Cache will then be re-introduced in Red Hat Enterprise Linux.
  • Anaconda cannot access more than 8 SmartArray controllers. If your system has more than 8 such controllers equipped, you will only be able to use storage on the first 8 controllers detected. Anaconda will fail when it attempts to open all other controllers (i.e. the 9th controller and above).
    Note, however, that these devices will still function properly after installation.
  • Firefox is now updated to version 3.0. This update features several fixes and enhancements, most notably:
    • Set homepages are now loaded correctly when the Firefox browser window is opened.
    • Firefox no longer crashes when you search for the string "do".
    • Firefox in 64-bit mode now loads the ext JavaScript library correctly. In previous versions of Firefox, web-based applications that used this library either took too long to load, or were never loaded at all.
    • A cross-site scripting flaw was discovered in the way Firefox handled the jar:URI scheme. This flaw made it possible for a malicious web site to conduct a scripting attack against the user. This security issue is now fixed in this update.
    • Several flaws were discovered in the way Firefox processed certain malformed content. Web sites that contained such content could cause Firefox to crash or even execute arbitrary code as the user running Firefox. This security issue is now fixed in this update.
    • A race condition was discovered in the way Firefox set the window.location property on a web page. With this flaw, it was possible for a web page to set an arbitrary Referer header; this could lead to a cross-site request forgery (CSRF) attack against websites that rely only on the Referer header. This security issue is now fixed in this update.
    • Firefox now renders correctly on laptops equipped with external display.
    Note, however, that this update of Firefox is not fully backwards compatible with all JavaScripts or Firefox plugins used today.
    Also, Red Hat has observed that several large commercial web applications have relied on the presence of some cross-site scripting flaws addressed by this Firefox update. These scripting flaws are described in the following links:
    Consequently, the use of these commercial web applications may result in some loss of functionality. You can observe this in the presence of additional JavaScript errors in the Firefox Error Console (Tools => Error Console). Red Hat is currently working with the corresponding vendors to address this.
  • The updated ixgbe driver does not support the Intel 82598AT (Copper Pond 10GbE).
  • Red Hat closely tracks the upstream Open Fabrics Enterprise Distribution (OFED) code base in order to provide a maximal level of enablement for this still evolving technology. As a consequence, Red Hat can only preserve API/ABI compatibility across minor releases to the degree that the upstream project does. This is an exception from the general practice in the development of Red Hat Enterprise Linux.
    Because of this, applications build on top of the OFED stack (listed below), might require recompilation or even source-level code changes when moving from one minor release of Red Hat Enterprise Linux to a newer one.
    This generally is not required for other applications, built on the Red Hat Enterprise Linux software stack.
    The components affected are:
    • dapl
    • compat-dapl
    • ibsim
    • ibutils
    • infiniband-diags
    • libcxgb3
    • libehca
    • libibcm
    • libibcommon
    • libibmad
    • libibumad
    • libibverbs
    • libipathverbs
    • libmlx4
    • libmthca
    • libnes
    • librmdacm
    • libsdp
    • mpi-selector
    • mpitests
    • mstflint
    • mvapich
    • mvapich2
    • ofed-docs
    • openib
    • openib-mstflint
    • openib-perftest
    • openib-tvflash
    • openmpi
    • opensm
    • perftest
    • qlvnictools
    • qperf
    • rds-tools
    • (future)
    • srptools
    • tvflash

1.2. x86 Architectures

  • Recording needs to be manually enabled on Dell M4300 and M6300. To do this, perform the following steps:
    1. Open alsamixer.
    2. Press Tab to toggle [Capture] in the View field (located at the upper left part of the menu).
    3. Press the Space bar.
    4. To verify that recording is enabled, the text above the ADCMux field should display L R CAPTUR.

1.3. x86-64 Architectures

  • Recording needs to be manually enabled on Dell M4300 and M6300. To do this, perform the following steps:
    1. Open alsamixer.
    2. Press Tab to toggle [Capture] in the View field (located at the upper left part of the menu).
    3. Press the Space bar.
    4. To verify that recording is enabled, the text above the ADCMux field should display L R CAPTUR.
  • On an IBM T61 laptop, Red Hat recommends that you refrain from clicking the glxgears window (when glxgears is run). Doing so can lock the system.
    To prevent this from occurring, disable the tiling feature. To do so, add the following line in the Device section of /etc/X11/xorg.conf:
    Copy to Clipboard Toggle word wrap 
    Option "Tiling" "0"
  • The distribution version of the release notes stated that crash dumping through kexec and kdump did not function reliably with HP Smart Array controllers. As of general availability, this issue is now resolved.

1.4. PowerPC Architectures

  • Recording needs to be manually enabled on Dell M4300 and M6300. To do this, perform the following steps:
    1. Open alsamixer.
    2. Press Tab to toggle [Capture] in the View field (located at the upper left part of the menu).
    3. Press the Space bar.
    4. To verify that recording is enabled, the text above the ADCMux field should display L R CAPTUR.
  • The setroubleshootd daemon no longer exits with a fault the first time sealert attempts to connect to the daemon.

1.5. ia64 Architecture

  • Recording needs to be manually enabled on Dell M4300 and M6300. To do this, perform the following steps:
    1. Open alsamixer.
    2. Press Tab to toggle [Capture] in the View field (located at the upper left part of the menu).
    3. Press the Space bar.
    4. To verify that recording is enabled, the text above the ADCMux field should display L R CAPTUR.
  • Running perftest will fail if different CPU speeds are detected. As such, you should disable CPU speed scaling before running perftest.
  • When the kdump kernel is booted, the following error will appear in the boot log:
    Copy to Clipboard Toggle word wrap 
    mknod: /tmp/initrd.[numbers]/dev/efirtc: No such file or directory
    This error results from a malformed request to create the efirtc in an incorrect path. However, the device path in question is also created statically in the initramfs when the kdump service is started. As such, the run-time creation of the device node is redundant, harmless, and should not affect the performance of kdump.
  • The distribution version of the release notes stated that crash dumping through kexec and kdump did not function reliably with HP Smart Array controllers. As of general availability, this issue is now resolved.
  • Some systems may be unable to boot the kdump kernel properly. In such cases, use the machvec=dig kernel parameter.

3. Feature Updates

3.1. All Architectures

Systemtap
Systemtap is a GPL-based infrastructure which simplifies information gathering on a running Linux system. This assists in diagnosis of performance or functional problems. With systemtap, the tedious and disruptive "instrument, recompile, install, and reboot" sequence is no longer needed to collect diagnostic data.
Systemtap is now fully supported. For more information refer to http://sources.redhat.com/systemtap.
iSNS-utils
The Internet storage name service for Linux (isns-utils) is now supported. This allows you to register iSCSI and iFCP storage devices on the network. isns-utils allows dynamic discovery of available storage targets through storage initiators.
isns-utils provides intelligent storage discovery and management services comparable to those found in fibre-channel networks. This allows an IP network to function in a similar capacity to a storage area network.
With its ability to emulate fibre-channel fabric services, isns-utils allows for seamless integration of IP and fibre-channel networks. In addition, isns-utils also provides utilities for managing both iSCSI and fibre-channel devices within the network.
For more information about isns-utils specifications, refer to http://tools.ietf.org/html/rfc4171. For usage instructions, refer to /usr/share/docs/isns-utils-[version]/README and /usr/share/docs/isns-utils-[version]/README.redhat.setup.
rsyslog
rsyslog is an enhanced multi-threaded syslogd daemon that supports the following (among others):
  • MySQL
  • syslog/tcp
  • RFC 3195
  • permitted sender lists
  • filtering on any message part
  • more granular output format control
rsyslog is compatible with the stock sysklogd, and can be used as a replacement in most cases. Its advanced features make it suitable for enterprise-class, encrypted syslog relay chains; at the same time, its user-friendly interface is designed to make setup easy for novice users.
For more information about rsyslog, refer to http://www.rsyslog.com/.
Openswan
Openswan is a free implementation of Internet Protocol Security (IPsec) and Internet Key Exchange (IKE) for Linux. IPsec uses strong cryptography to provide authentication and encryption services. These services allow you to build secure tunnels through untrusted networks. Everything passing through the untrusted network is encrypted by the IPsec gateway machine and decrypted by the gateway at the other end of the tunnel. The resulting tunnel is a virtual private network (VPN).
This release of Openswan supports IKEv2 (RFC 4306, 4718) and contains an IKE2 daemon that conforms to IETF RFCs. For more information about Openswan, refer to http://www.openswan.org/.
Evolution
The Evolution update for this release now features the following enhancements (among others):
  • Bogofilter compatibility for filtering junk mail.
  • An option to receive pop-up notifications for new mail.
  • Improved performance for downloading messages from a Microsoft Exchange™ server.
  • A setup assistant to guide you through both backing up and restoring data and settings.
Thunderbird
Thunderbird has been updated to version 2.0.0.12. This update applies the following features (among others):
  • Message tags, which help organize email.
  • Built-in support for Google Mail and .Mac mail.
  • Find-as-you-type, which highlights and filters message text as you type.
  • An updated extension system, which provides enhanced security and allows easier extension localization.
For more information about this update, refer to http://www.mozilla.com/en-US/thunderbird/2.0.0.0/releasenotes/.
Password Hashing Using SHA-256/SHA-512
Password hashing using the SHA-256 and SHA-512 hash functions is now supported.
To switch to SHA-256 or SHA-512 on an installed system, run authconfig --passalgo=sha256 --update or authconfig --passalgo=sha512 --update. To configure the hashing method through a GUI, use authconfig-gtk. Existing user accounts will not be affected until their passwords are changed.
For newly installed systems, using SHA-256 or SHA-512 can be configured only for kickstart installations. To do so, use the --passalgo=sha256 or --passalgo=sha512 options of the kickstart command auth; also, remove the --enablemd5 option if present.
If your installation does not use kickstart, use authconfig as described above. After installation, change all created passwords, including the root password.
Appropriate options were also added to libuser, pam, and shadow-utils to support these password hashing algorithms. authconfig configures necessary options automatically, so it is usually not necessary to modify them manually:
  • New values of the crypt_style option and new options for both hash_rounds_min and hash_rounds_max are now supported in the [defaults] section of /etc/libuser.conf. For more information, refer to man libuser.conf.
  • New options sha256, sha512, and rounds are now supported by the pam_unix PAM module. For more information, refer to /usr/share/doc/pam-[pam version]/txts/README.pam_unix.
  • The following new options in /etc/login.defs are now supported by shadow-utils:
    • ENCRYPT_METHOD — Specifies the encryption methods to be used. Valid values are DES, MD5, SHA256, and SHA512. If this option is defined, MD5_CRYPT_ENAB is ignored.
    • SHA_CRYPT_MIN_ROUNDS and SHA_CRYPT_MAX_ROUNDS — Specifies the number of hashing rounds to use if ENCRYPT_METHOD is set to SHA256 or SHA512. If neither option is set, a default value is chosen by glibc. If only one option is set, the encryption method specifies the number of rounds.
      If both options are used, they specify an inclusive interval from which the number of rounds is chosen randomly. The selected number of rounds is limited to the inclusive interval [1000, 999999999].
OFED in comps.xml
The group OpenFabrics Enterprise Distribution is now included in comps.xml. This group contains components used for high-performance networking and clustering (for example, InfiniBand and Remote Direct Memory Access).
Further, the Workstation group has been removed from comps.xml in the Red Hat Enterprise Linux 5.2 Client version. This group only contained the openib package, which is now part of the OpenFabrics Enterprise Distribution group.
system-config-netboot
system-config-netboot is now included in this update. This is a GUI-based tool used for enabling, configuring, and disabling network booting. It is also useful in configuring PXE-booting for network installations and diskless clients.
openmpi
In order to accommodate the use of compilers other than gcc for specific applications that use message passing interface (MPI), the following updates have been applied to the openmpi and lam packages:
  • MPI installations are now consolidated under a single installation directory. All files can now be found under /usr/lib(64)/lam and /usr/lib(64)/openmpi/[openmpi version]-[compiler name].
  • Version and compiler strings are now included in the openmpi installation path, but not the lam installation path. This enables you to install multiple versions of openmpi, or install the same version of openmpi built by different compilers.
    While this capability allows you to use a version of openmpi built by another compiler, Red Hat only supports the latest, gcc-compiled version of openmpi.
  • openmpi and lam now use mpi-selector to set which MPI implementation to use at any given time. For more information, refer to man mpi-selector and man mpi-selector-menu.
Note that when upgrading to this release's version of openmpi, you should migrate any default parameters set for lam or openmpi to /usr/lib(64)/lam/etc/ and /usr/lib(64)/openmpi/[openmpi version]-[compiler name]/etc/. All configurations for either openmpi or lam should be set in these directories.
lvm2 Snapshot Volume Warning
lvm2 will now warn if a snapshot volume is near its maximum capacity. However, this feature is not enabled by default.
To enable this feature, uncomment the following line in /etc/lvm/lvm.conf：
Copy to Clipboard Toggle word wrap 
snapshot_library = "libdevmapper-event-lvm2snapshot.so"
Ensure that the dmeventd section and its delimiters ({ }) are also uncommented.
bash
bash has been updated to version 3.2. This version fixes a number of outstanding bugs, most notably:
  • bash man page: updated to reflect the correct behavior of special built-in commands (such as eval, exec, and set. In addition, the bash man page now includes an explanation of the use of aliases in non-interactive scripts.
  • File descriptors now work as expected; in previous releases, bash did not close file descriptors with two or more digits.
  • A bug in the way bash handled certain multi-byte strings is now fixed.
Note that with this update, the output of ulimit -a has also changed from the Red Hat Enterprise Linux 5.1 version. This may cause a problems with some automated scripts. If you have any scripts that use ulimit -a output strings, you should revise them accordingly.

3.2. s390x Architectures

Writing System Data to z/VM Monitor Stream
It is now possible to write process and file system data to the z/VM monitor stream. This allows you to consolidate more system resource information into a single source for performance monitoring purposes.
However, since the appropriate scripts for the services in /etc/init.d are not available in this release, you need to manually start the daemons for them. To write process utilization data to the z/VM monitor stream, run /usr/sbin/mon_procd. To write file system utilization data to the z/VM monitor stream, run /usr/sbin/mon_fsstatd.

4. Driver Updates

4.1. All Architectures

General Driver/Platform Updates
  • Added the necessary PCI IDs to support the Intel E7221 Graphic Controller.
  • Added the necessary sub-device IDs to support the PCI-Express icom WAN adapter.
  • i2c-piix4 kernel module is now enabled to support the AMD SBX00 SMBus.
  • The following kernel configuration flags are now enabled to enhance kernel panic handling for Intelligent Platform Management Interface (IPMI):
    • CONFIG_IPMI_PANIC_EVENT — when a panic occurs, the IPMI message handler generates an IPMI event describing the panic to each interface registered with the message handler.
    • CONFIG_IPMI_PANIC_STRING — when a panic occurs, OEM events containing the panic string are generated.
    In addition to this, IPMI now supports the IBM Bladecenter QS21 and QS22.
  • The tlclk driver is now included to support the Intel MPCBL0050 systems.
  • Intel Dynamic Acceleration Technology is now supported on Intel Core 2 Duo mobile processors. This allows a core to run at a higher-than-normal frequency when all CPUs (as a whole) are operating below maximum power.
  • ioatdma: Added the necessary PCI IDs to support the DMA engine used in Unisys ES7000 systems.
Graphics/Audio
  • High-Definition Multimedia Interface (HDMI) audio is now supported on AMD ATI integrated chipsets.
  • The Intel Xorg driver now provides enhanced support for i915 (and later) chips. This driver is also the default driver now for such chips. If you prefer to use the older Xorg driver (originally used for i810 chips), replace Intel with i810 in the Driver line of /etc/X11/xorg.conf (under the "Device" section).
    Basic runtime multi-head support is provided by the intel Xorg driver. Selecting a resolution with the System => Preferences => Screen Resolution tool (gnome-display-properties) will set that resolution on all connected outputs.
    Video hotkey support (Fn+F7 on most laptops) in the "intel" Xorg driver will scan all output connectors (including ports for the built-in flat panel on laptops) to determine which of them have monitors attached. All connected output ports will then be enabled.
Network
  • bnx2x: driver added to provide support for bcm5710 hardware.
  • tg3: updated to version 3.86. This update enables support for BroadCom 5761 and 5784 devices.
  • sierra: updated to version 1.0.5. This update enables support for additional variants of Sierra Wireless MC8755 and MC8775 chipsets.
  • In this release, the Intel 82540 – 82547 network cards are supported by the e1000 driver, while the following network cards are supported by the e1000e driver:
    • Intel 82571 – 82573
    • Intel 82562
    • Intel 82566
    • Intel 80003eslan
    In Red Hat Enterprise Linux 5.1, the e1000 driver supported all the aforementioned network cards.
    If your system contains a combination of both types of network cards, ethernet devices may be enumerated in a different order in this release. You may need to modify your network configuration after installation in order to remap each card's hardware address to specific device names if you need to preserve a particular order.
    Note that properly configured systems should not have device names changed on upgrade. To ensure this, the network configuration files (/etc/sysconfig/network-scripts/ifcfg-[device name]) should contain the HWADDR parameter, binding the device name to a specific hardware address.
Storage
  • lpfc: updated to version 8.2.0.22. This update applies several devloss fixes, and enables support for the following:
    • 1, 2, 4, and 8GB auto-rate negotiation.
    • FC-SP DH-CHAP Authentication.
    • The latest HBAnyware configuration utility, which is also part of the driver master kit. This enables GUI-based driver configuration (including fibre channel and TCP/IP remote storage area network management), diagnostics (loopback and diagnostics dump) and FC-SP/Authentication Diffie-Hellman CHAP (DH-CHAP).
    • LPe1250, LPe1252, LPe12000 and LPe12002 (2, 4, and 8Gb capable HBAs).
    • NPIV virtual ports.
  • megaraid_sas: updated to version 3.15. This applies several upstream changes, most notably:
    • Added the following module parameters:
      • fast_load: enables the driver to load faster by skipping physical device check.
      • cmd_per_lun: sets the maximum number of commands per logical unit.
      • max_sectors: sets the maximum number of sectors per I/O command.
      • poll_mode_io: enables support for polling (i.e. reduced interrupt operations). When poll_mode_io is set, commands will also be completed from the I/O path.
    • Added support for hibernation.
    • SYNCHRONIZE_CACHE is now blocked by the driver.
  • aacraid: updated to version 1.1.5-2453. This applies several upstream changes, most notably:
    • Fixed a bug that caused aacraid to use an incorrect dma mapping mask during firmware assert recovery.
    • Added the capability to issue a hardware reset to the adapter via sysfs. In line with this, the following check features were also added:
      • check_interval — for checking adapter health
      • update_interval — for revising time intervals used by adapter
      • check_reset — for blocking adapter checks/resets
    • Added a SYNCHRONIZE_CACHE call to implement a more effective cache flushing schedule. This helps reduce application stalls resulting from multiple applications issuing I/O commands to the storage device.
    • Replaced all if/else packet formations with platform function calls.
    • VPD inquiry pages are now supported. This ensures that when an array is created, the metadata stored on the physical device is issued a unique serial number. This serial number remains constant throughout array morphing or migration to other controllers.
  • qla2xxx: updated to version 8.02.00-k5. This update to qla2xxx adds support for the following:
    • EHAFT, a QLogic host bus adapter mechanism that provides activity information about fibre channel devices.
    • N_Port ID Virtualization (NPIV), which allows multiple N_Port IDs to share a single physical N_Port. This allows you to tie virtualized guests to fibre-channel identifiers, allowing those guests to migrate between hosts while retaining their access in the storage area network.
    • 8GB fibre-channel devices.
    This update also applies several improvements provided from upstream.
  • mpt fusion: updated to version 3.04.05. This update provides several changes, most notably:
    • On-the-fly logging (via the sysfs shost attribute) is now supported.
    • Added new sysfs shost attributes that provide the following:
      • board_name
      • board_assembly
      • board_tracer
      • unique_id
      • version_bios
      • version_fw
      • version_product
      • version_mpi
      • version_nvdata_default
      • version_nvdata_persistent
      • debug_level
      • io_delay
      • device_delay
    • task_abort calls are no longer sent to hidden RAID components and volumes.
    • Changes related to fibre channel:
      • Brocade, a rebranded FC949E fibre channel controller, is now supported.
      • Link speeds are now displayed when the driver is loaded and whenever the link speed changes.
      • High-priority request queueing is now used instead of the handshake/doorbell system when sending management requests for SAS or fibre channel.
    • Changes related to parallel SCSI:
      • ATTO UL4D, a rebranded SPI 1030 controller, is now supported.
      • mptspi_target_destroy is now declared as static.

4.2. x86 Architectures

General Driver/Platform Updates
  • All PCI-X configuration registers (up to 4096 bytes) are now accessible.
  • The maximum length of the kernel command line is now 2,048 bytes. To use this increased maximum length, upgrade the grub package.
  • The following chipsets are now supported through the EDAC driver:
    • Intel 3000
    • Intel 3010
    • Intel 5000 (Greencreek/Blackford)
  • The Intel Tolapai chipset (SATA, I2C) is now supported.
Graphics/Audio
  • The Sony/Philips Digital Interconnect Format (S/PDIF) port on the Dell D/Dock Expansion Station is now supported by the Dell M4300 and M6300 Precision Workstations. This allows digital audio output through the S/PDIF port on the Dell D/Dock Expansion Station when either the M4300 or M6300 is docked.

4.3. x86-64 Architectures

General Driver/Platform Updates
  • The maximum length of the kernel command line is now 2,048 bytes. To use this increased maximum length, upgrade the grub package.
  • The following chipsets are now supported through the EDAC driver:
    • Intel 3000
    • Intel 3010
    • Intel 5000 (Greencreek/Blackford)
Graphics/Audio
  • The Sony/Philips Digital Interconnect Format (S/PDIF) port on the Dell D/Dock Expansion Station is now supported by the Dell M4300 and M6300 Precision Workstations. This allows digital audio output through the S/PDIF port on the Dell D/Dock Expansion Station when either the M4300 or M6300 is docked.

4.4. PowerPC Architectures

Graphics/Audio
  • The Sony/Philips Digital Interconnect Format (S/PDIF) port on the Dell D/Dock Expansion Station is now supported by the Dell M4300 and M6300 Precision Workstations. This allows digital audio output through the S/PDIF port on the Dell D/Dock Expansion Station when either the M4300 or M6300 is docked.

4.5. ia64 Architecture

Graphics/Audio
  • The Sony/Philips Digital Interconnect Format (S/PDIF) port on the Dell D/Dock Expansion Station is now supported by the Dell M4300 and M6300 Precision Workstations. This allows digital audio output through the S/PDIF port on the Dell D/Dock Expansion Station when either the M4300 or M6300 is docked.

6. Virtualization

This section contains information about updates made to Red Hat Enterprise Linux suite of Virtualization tools.

6.1. All Architectures

Enhancements/Updates
  • Running 16 cores or more using AMD Rev F processors no longer results in system resets when performing fully-virtualized guest installations.
  • On an AMD NPT system used as a PAE host, guests can now have more than 4GB of memory.
    Note that nested paging can only translate 32-bit guest virtual addresses. This is because of a hardware feature that exists only in 32-bit physical address extensions (PAE).
  • When entering the second stage of a Windows™ Server 2003 installation, you no longer need to manually edit /etc/xen/[name of guest machine] to continue. The current user interface now allows you to change media on CD-ROMs attached to the guest.
  • The Virtual Machine Manager (virt-manager) included in this release now allows users to specify kernel boot parameters to the paravirtualized guest installer.
  • During the lifetime of dom0, you can now create guests (i.e. xm create) more than 32,750 times.
  • When using virt-manager to add disks to an existing guest, duplicate entries are no longer created in the guest's /etc/xen/[domain name] configuration file.
Known Issues
  • Paravirtualized guests can only have a maximum of 16 disk devices.
  • Repeated live migration of paravirtualized guests between two hosts may cause one host to panic. If a host is rebooted after migrating a guest out of the system and before migrating the same guest back, the panic will not occur.
  • If a system configured for kdump encounters a kernel panic while an IDE device is performing I/O, the system may be unable to successfully boot into the kdump environment. This occurs if the IDE device is controlled by a device driver other than libata, and is caused by a bug in the IDE/ATA driver stack.
    To work around this, use the kdump command-line argument hd[X]=noprobe for storage devices and hd[X]=cdrom for optical drives, where [X] is the device identifier. Either command-line argument should be added to KDUMP_COMMANDLINE_APPEND in /etc/sysconfig/kdump.

6.2. x86 Architectures

Known Issues
  • Migrating paravirtualized guests through xm migrate [domain] [dom0 IP address] does not work.
  • When installing Red Hat Enterprise Linux 5 on a fully virtualized SMP guest, the installation may freeze. This can occur when the host (dom0) is running Red Hat Enterprise Linux 5.2.
    To prevent this, set the guest to use a single processor using the install. You can do this by using the --vcpus=1 option in virt-install. Once the installation is completed, you can set the guest to SMP by modifying the allocated vcpus in virt-manager.

6.3. x86-64 Architectures

Enhancements/Updates
  • The hypervisor can now support up to 512GB of memory. To ensure that the system properly detects and uses this much memory, boot the virtualized kernel with the parameter xenheap_megabytes=64.
    For systems that use Non-Uniform Memory Access (NUMA), Red Hat recommends that you use the parameter dom0_mem=512m. Note that this can be set to a maximum of 120GB (dom0_mem=120gb).
  • You can now run paravirtualized 32-bit guests on 64-bit hosts. This capability is now included as a technology preview. Note that the ability to save, restore, and migrate paravirtualized 32-bit guests on 64-bit hosts is not functional, and as such should not be attempted.
Known Issues
  • Migrating paravirtualized guests through xm migrate [domain] [dom0 IP address] does not work.
  • Creating a guest more than 1,000 times will cause dom0 to reboot suddenly. Red Hat recommends that you pre-empt this by rebooting dom0 before the domain ID of any guest reaches 1000.
  • Installing the Virtualization feature may cause a Copy to Clipboard Toggle word wrap 
    time went backwards
     warning on HP systems with model numbers xw9300 and xw9400.
    To work around this issue for xw9400 machines, configure the BIOS settings to enable the HPET timer. Note that this option is not available on xw9300 machines.
  • Installing Red Hat Enterprise Linux 3.9 on a fully virtualized guest may be extremely slow. In addition, booting up the guest after installation may result in hda: lost interrupt errors.
    To avoid this bootup error, configure the guest to use the SMP kernel.
  • Upgrading a host (dom0) system to Red Hat Enterprise Linux 5.2 may render existing Red Hat Enterprise Linux 4.5 SMP paravirtualized guests unbootable. This is more likely to occur when the host system has more than 4GB of RAM.
    To work around this, boot each Red Hat Enterprise Linux 4.5 guest in single CPU mode and upgrade its kernel to the latest version (for Red Hat Enterprise Linux 4.5.z).

6.4. ia64 Architecture

Enhancements/Updates
  • When attempting to create a fully-virtualized guest, the hypervisor no longer hangs due to memory shortage when a large amount of memory is allocated to the guest. This version of the hypervisor automatically takes care of allocating needed memory for hypervisor overhead.
  • Virtualization on this architecture can now support guests with RAM beyond 65,434 MB.
  • By default, the Itanium dom0 virtualized kernel can now boot with up to 4 CPUs and a maximum system memory of 4GB. In previous releases, the Itanium dom0 virtualized kernel only booted with 1 CPU and a maximum system memory of 500MB by default.
    In addition to this, the Itanium dom0 virtualized kernel allocates as much system memory as it can (up to the 4GB maximum by default, or up to the maximum amount specified with the dom0_mem= parameter) while avoiding memory starvation on the hypervisor.
Known Issues
  • Migrating paravirtualized guests through xm migrate [domain] [dom0 IP address] does not work.
  • Creating a guest more than 1,000 times will cause dom0 to reboot suddenly. Red Hat recommends that you pre-empt this by rebooting dom0 before the domain ID of any guest reaches 1000.
  • If you encounter a guest installation failure, Red Hat recommends that you restart the xend daemon before attempting to install a new guest.
  • On some Itanium systems configured for console output to VGA, the dom0 virtualized kernel may fail to boot. This is because the virtualized kernel failed to properly detect the default console device from the Extensible Firmware Interface (EFI) settings.
    When this occurs, add the boot parameter console=tty to the kernel boot options in /boot/efi/elilo.conf.
  • On some Itanium systems (such as the Hitachi Cold Fusion 3e), the serial port cannot be detected in dom0 when VGA is enabled by the EFI Maintenance Manager. As such, you need to supply the following serial port information to the dom0 kernel:
    • Speed in bits/second
    • Number of data bits
    • Parity
    • io_base address
    These details must be specified in the append= line of the dom0 kernel in /boot/efi/elilo.conf. For example:
    append="com1=19200,8n1,0x3f8—quiet rhgb console=tty0 console=ttyS0,19200n8"
    In this example, com1 is the serial port, 19200 is the speed (in bits/second), 8n1 specifies the number of data bits/parity settings, and 0x3f8 is the io_base address.
  • Virtualization does not work on architectures that use NUMA. As such, installing the virtualized kernel on systems that use NUMA will result in a boot failure.
    Some installation numbers install the virtualized kernel by default. If you have such an installation number and your system uses NUMA (or cannot disable NUMA), deselect the Virtualization option during installation.
  • Currently, live migration of fully virtualized guests is not supported on this architecture. In addition, kexec and kdump are also not supported for virtualization on this architecture.

7. Technology Previews

Technology Preview features are currently not supported under Red Hat Enterprise Linux subscription services, may not be functionally complete, and are generally not suitable for production use. However, these features are included as a customer convenience and to provide the feature with wider exposure.
Customers may find these features useful in a non-production environment. Customers are also free to provide feedback and functionality suggestions for a Technology Preview feature before it becomes fully supported. Erratas will be provided for high-severity security issues.
During the development of a Technology Preview feature, additional components may become available to the public for testing. It is the intention of Red Hat to fully support Technology Preview features in a future release.

7.1. All Architectures

ALUA Mode on EMC Clariion
Explicit active-passive failover (ALUA) mode using dm-multipath on EMC Clariion storage is now available. This mode is provided as per T10 specifications, but is provided in this release only as a technology preview.
For more information about T10, refer to http://www.t10.org.
radeon_tp
The radeon_tp driver is now included in this release as a Technology Preview. This driver enables the ATI R500/R600 chipsets.
This driver also features the following capabilities:
  • Modesetting on R500/R600 chipsets
  • 2D acceleration on R500 chipsets
  • Shadow framebuffer acceleration on R600 chipsets
FreeIPMI
FreeIPMI is now included in this update as a Technology Preview. FreeIPMI is a collection of Intelligent Platform Management IPMI system software. It provides in-band and out-of-band software, along with a development library conforming to the Intelligent Platform Management Interface (IPMI v1.5 and v2.0) standards.
For more information about FreeIPMI, refer to http://www.gnu.org/software/freeipmi/
Frysk
The goal of the frysk project is to create an intelligent, distributed, always-on system monitoring and debugging tool that allows developers and system administrators to:
  • monitor running processes and threads (including creation and destruction events)
  • monitor the use of locking primitives
  • expose deadlocks
  • gather data
  • debug any given process by choosing it from a list or allowing frysk to open a source code (or other) window on a process that is crashing or misbehaving
This updated version of frysk includes the following new utilities:
  • fauxv
  • fdebuginfo
  • fdebugrpm
  • ferror
  • fexe
  • fmaps
In addition, ftrace can now perform signal and function symbol tracing. In previous releases, ftrace could only perform system call tracing.
frysk was introduced in Red Hat Enterprise Linux 5, and is still included in this release as a Technology Preview. For more information about frysk, refer to http://sources.redhat.com/frysk/.
TrouSerS and tpm-tools
TrouSerS and tpm-tools are included in this release to enable use of Trusted Platform Module (TPM) hardware.TPM hardware features include (among others):
  • Creation, storage, and use of RSA keys securely (without being exposed in memory)
  • Verification of a platform's software state using cryptographic hashes
TrouSerS is an implementation of the Trusted Computing Group's Software Stack (TSS) specification. You can use TrouSerS to write applications that make use of TPM hardware. tpm-tools is a suite of tools used to manage and utilize TPM hardware.
For more information about TrouSerS, refer to http://trousers.sourceforge.net/.
eCryptfs
eCryptfs is a stacked cryptographic file system for Linux. It mounts on individual directories in existing mounted lower file systems such as EXT3; there is no need to change existing partitions or file systems in order to start using eCryptfs.
eCryptfs stores cryptographic metadata in the header of each file written to the lower file system. This enables you to copy encrypted files between hosts or directly onto backup media. Files encrypted and copied in this manner can be decrypted with the proper key.
This release's version of eCryptfs provides several key management options, including protection based on passphrases and public keys. Below is a list of other fully functional features:
  • Interactive and non-interactive mounting.
  • Compatibility with SELinux.
  • Cryptographic metadata storage in both xattrs and file headers.
At present, the following issues still exist with eCryptfs:
  • direct_IO is not implemented.
  • Complex I/O patterns within the mmap implementation in eCryptfs may cause data corruption in some cases.
  • eCryptfs cannot be used for root file systems.
For more information about eCryptfs, refer to http://ecryptfs.sf.net. You can also refer to http://ecryptfs.sourceforge.net/README and http://ecryptfs.sourceforge.net/ecryptfs-faq.html for basic setup information.
GFS2
GFS2 is an incremental advancement of GFS. This update applies several significant improvements that require a change to the on-disk file system format. GFS file systems can be converted to GFS2 using the utility gfs2_convert, which updates the metadata of a GFS file system accordingly.
While much improved since its introduction in Red Hat Enterprise Linux 5, GFS2 remains a Technology Preview. Benchmark tests indicate faster performance on the following:
  • heavy usage in a single directory and faster directory scans (Postmark benchmark)
  • synchronous I/O operations (fstest benchmark test indicates improved performance for messaging applications like TIBCO)
  • cached reads, as there is no longer any locking overhead
  • direct I/O to preallocated files
  • NFS file handle lookups
  • df, as allocation information is now cached
In addition, GFS2 also features the following changes:
  • journals are now plain (though hidden) files instead of metadata. Journals can now be dynamically added as additional servers mount a file system.
  • quotas are now enabled and disabled by the mount option quota=<on|off|account>
  • quiesce is no longer needed on a cluster to replay journals for failure recovery
  • nanosecond timestamps are now supported
  • similar to ext3, GFS2 now supports the data=ordered mode
  • attribute settings lsattr() and chattr() are now supported via standard ioctl()
  • file system sizes above 16TB are now supported
  • GFS2 is a standard file system, and can be used in non-clustered configurations
Stateless Linux
Stateless Linux is a new way of thinking about how a system should be run and managed, designed to simplify provisioning and management of large numbers of systems by making them easily replaceable. This is accomplished primarily by establishing prepared system images which get replicated and managed across a large number of stateless systems, running the operating system in a read-only manner (refer to /etc/sysconfig/readonly-root for more details).
In its current state of development, the Stateless features are subsets of the intended goals. As such, the capability remains as Technology Preview.
Red Hat recommends that those interested in testing stateless code read the HOWTO at http://fedoraproject.org/wiki/StatelessLinux/HOWTO and join stateless-list@redhat.com.
The enabling infrastructure pieces for Stateless Linux were originally introduced in Red Hat Enterprise Linux 5.
AIGLX
AIGLX is a Technology Preview feature of the otherwise fully supported X server. It aims to enable GL-accelerated effects on a standard desktop. The project consists of the following:
  • A lightly modified X server.
  • An updated Mesa package that adds new protocol support.
By installing these components, you can have GL-accelerated effects on your desktop with very few changes, as well as the ability to enable and disable them at will without replacing your X server. AIGLX also enables remote GLX applications to take advantage of hardware GLX acceleration.
iSCSI Target
The Linux target (tgt) framework allows a system to serve block-level SCSI storage to other systems that have a SCSI initiator. This capability is being initially deployed as a Linux iSCSI target, serving storage over a network to any iSCSI initiator.
To set up the iSCSI target, install the scsi-target-utils RPM and refer to the instructions in:
  • /usr/share/doc/scsi-target-utils-[version]/README
  • /usr/share/doc/scsi-target-utils-[version]/README.iscsi
Replace [version] with the corresponding version of the package installed.
For more information, refer to man tgtadm.
FireWire
The firewire-sbp2 module is still included in this update as a Technology Preview. This module enables connectivity with FireWire storage devices and scanners.
At present, FireWire does not support the following:
  • IPv4
  • pcilynx host controllers
  • multi-LUN storage devices
  • non-exclusive access to storage devices
In addition, the following issues still exist in FireWire:
  • a memory leak in the SBP2 driver may cause the machine to become unresponsive.
  • a code in this version does not work properly in big-endian machines. This could lead to unexpected behavior in PowerPC.

7.2. x86 Architectures

mac80211 802.11a/b/g WiFi protocol stack (mac80211)
The mac80211 stack (formerly known as the devicescape/d80211 stack) enables the iwlwifi 4965GN wireless driver for Intel Wifi Link 4965 hardware. This stack allows certain wireless devices to connect to any Wi-Fi network.
Although the stack is already accepted upstream, the stability of this stack is yet to be verified through testing. As such, this stack is included in this release as a Technology Preview.

7.3. x86-64 Architectures

mac80211 802.11a/b/g WiFi protocol stack (mac80211)
The mac80211 stack (formerly known as the devicescape/d80211 stack) enables the iwlwifi 4965GN wireless driver for Intel Wifi Link 4965 hardware. This stack allows certain wireless devices to connect to any Wi-Fi network.
Although the stack is already accepted upstream, the stability of this stack is yet to be verified through testing. As such, this stack is included in this release as a Technology Preview.

8. Resolved Issues

8.1. All Architectures

  • Netapp devices can now complete failback (after a previously-failed path is restored) within a reasonable time with the default dm-multipath configuration.
  • system-config-kickstart now supports package selection through the Red Hat Network plugin.
  • kudzu can now properly parse ifcfg-* files that contain quotes around the HWADDR or SUBCHANNELS parameters. In addition, if a device's HWADDR is not specified, kudzu no longer modifies network configurations when the device is changed.
  • Running netstat with the -A inet or -A inet6 option (on a system where sctp was not added to the kernel) no longer terminates abnormally. Note, however, that netstat will display the following warning message when invoked with the -s option:
    Copy to Clipboard Toggle word wrap 
    	      netstat: no support for `AF INET (sctp)' on this system.
  • The nohide export option is no longer required on referral exports (i.e. exports that specify a referral server). For more information on bound mounts, refer to man 5 exports.
  • The priority callouts of dm-multipath are now statically compiled and copied onto the memory of multipathd. As such, multipathd no longer requires access to the root file system in order to execute priority callouts.
    This fixes a problem that occurred when running dm-multipath on devices containing the root file system, which caused such devices to freeze during fibre-channel path faults.
  • parted can now understand and correctly print out Xen Virtual Device (XVD) partition labels. This allows paravirtualized guests to use the parted utility. It is no longer necessary to run parted within dom0 to configure disk partitions on paravirtualized guests.
  • When upgrading to Red Hat Enterprise Linux 5.2 via Red Hat Network, you no longer need to manually import the redhat-beta key prior to upgrading.
  • Systems using the AMD 8132 or HT 1000 chipsets no longer need the pci=nommconf kernel parameter.
    Note that the system will still restrict such bridges to using the PortIO CF8/CFC mechanism. However, bridges (including those on the same platform) that respond correctly to MMCONFIG cycles will use MMCONFIG, provided that the platform's BIOS correctly supports MMCONFIG.
    However, if you are installing Red Hat Enterprise Linux 5.2 on an HP DC7800, the kernel parameter, pci=nommconf, is still needed. This is because the HP DC7800 is not yet included in the MMCONF blacklist.
  • Previous versions of Red Hat Enterprise Linux 5 on HP BL860c blade systems could hang during the IP information request stage of installation. When this occurred, you were required to reboot and perform the installation with Ethernet autonegotiation disabled.
    Red Hat Enterprise Linux 5.2 includes a fix for this issue.
  • Gemalto 64K smart cards now use Chip/Smart Card Interface Devices-compliant (CCID-compliant) readers. Previously, this smart card used the built-in e-gate reader, which essentially meant that the card and reader were being inserted at the same time. As a result, coolkey did not consistently recognize Gemalto 64K smart cards.
    With this update, coolkey now works correctly with Gemalto 64k smart cards.

8.2. x86-64 Architectures

  • Systems equipped with Intel graphics cards that have the XD (execute disable) option disabled no longer crash upon exiting an X session.
  • Using the divider= command-line argument now works properly on this architecture.
  • The Calgary IOMMU chip is now supported by default. As such, the kernel command line option iommu=calgary to enable support for this chip is no longer necessary.

8.3. ia64 Architecture

  • Kernel modules such as e1000 and qla2xxx can now be unloaded while running the virtualized kernel. As such, you no longer need to reboot the system after installing third-party drivers.
  • The X server no longer attempts to utilize memory regions incompatible to its needs. This fixes a bug that previously caused a Machine Check Abort (MCA) on some Itanium systems.
  • A machine check error (which previously resulted in a dom0 reboot) no longer occurs when you attempt to run the virtualized kernel on systems that use the P600 SmartArray controller.

9. Known Issues

9.1. All Architectures

  • A bug in the updated /etc/udev/rules.d/50-udev.rules file prevents the creation of persistent names for tape devices with numbers higher than 9 in their names. For example, a persistent name will not be created for a tape device with a name of nst12.
    To work around this, add an asterisk (*) after each occurrence of the string nst[0-9] in /etc/udev/rules.d/50-udev.rules.
  • The smartctl tool cannot properly read SMART parameters from SATA devices.
  • A bug in previous versions of openmpi and lam may prevent you from upgrading these packages. This bug manifests in the following error (when attempting to upgrade openmpi or lam:
    Copy to Clipboard Toggle word wrap 
    error: %preun(openmpi-[version]) scriptlet failed, exit status 2
    As such, you need to manually remove older versions of openmpi and lam in order to install their latest versions. To do so, use the following rpm command:
    rpm -qa | grep '^openmpi-\|^lam-' | xargs rpm -e --noscripts --allmatches
  • Some controller names (specifically, newer ones) printed by the cciss driver are incorrect, and will not match correctly with the names listed in the HP documentation. The cciss firmware, however, will be able to correctly print the names of each attached controller at boot-time.
  • When using dm-multipath, if features "1 queue_if_no_path" is specified in /etc/multipath.conf then any process that issues I/O will hang until one or more paths are restored.
    To avoid this, set no_path_retry [N] in /etc/multipath.conf (where [N] is the number of times the system should retry a path). When you do, remove the features "1 queue_if_no_path" option from /etc/multipath.conf as well.
  • Enabling multiple installed versions of the same kernel module is not supported. In addition to this, a bug in the way kernel module versions are parsed can sometimes result in enabling an older version of the same kernel module.
    Red Hat recommends that when you install a newer version of an installed kernel module, you should delete the older one first.
  • Executing kdump on an IBM Bladecenter QS21 or QS22 configured with NFS root will fail. To avoid this, specify an NFS dump target in /etc/kdump.conf.
  • IBM T60 laptops will power off completely when suspended and plugged into a docking station. To avoid this, boot the system with the argument acpi_sleep=s3_bios.
  • The QLogic iSCSI Expansion Card for the IBM Bladecenter provides both ethernet and iSCSI functions. Some parts on the card are shared by both functions. However, the current qla3xxx and qla4xxx drivers support ethernet and iSCSI functions individually. Both drivers do not support the use of ethernet and iSCSI functions simultaneously.
    Because of this limitation, successive resets (via consecutive ifdown/ifup commands) may hang the device. To avoid this, allow a 10-second interval after an ifup before issuing an ifdown. Also, allow the same 10-second interval after an ifdown before issuing an ifup. This interval allows ample time to stabilize and re-initialize all functions when an ifup is issued.
  • Laptops equipped with the Cisco Aironet MPI-350 wireless may hang trying to get a DHCP address during any network-based installation using the wired ethernet port.
    To work around this, use local media for your installation. Alternatively, you can disable the wireless card in the laptop BIOS prior to installation (you can re-enable the wireless card after completing the installation).
  • Boot-time logging to /var/log/boot.log is not available in Red Hat Enterprise Linux 5.2.
  • The system may not successfully reboot into a kexec/kdump kernel if X is running and using a driver other than vesa. This problem only exists with ATI Rage XL graphics chipsets.
    If X is running on a system equipped with ATI Rage XL, ensure that it is using the vesa driver in order to successfully reboot into a kexec/kdump kernel.
  • When using Red Hat Enterprise Linux 5.2 on a machine with an nVidia CK804 chipset installed, the following kernel messages may appear:
    Copy to Clipboard Toggle word wrap 
    kernel: assign_interrupt_mode Found MSI capability
kernel: pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
    These messages indicate that certain PCI-E ports are not requesting IRQs. They do not, however, affect the operation of the machine in any way.
  • Removable storage devices (such as CDs and DVDs) do not automatically mount when you are logged in as root. As such, you will need to manually mount the device through the graphical file manager.
    Alternatively, you can run the following command to mount a device to /media:
    Copy to Clipboard Toggle word wrap 
    mount /dev/[device name] /media
  • When a LUN is deleted on a configured storage system, the change is not reflected on the host. In such cases, lvm commands will hang indefinitely when dm-multipath is used, as the LUN has now become stale.
    To work around this, delete all device and mpath link entries in /etc/lvm/.cache specific to the stale LUN.
    To find out what these entries are, run the following command:
    ls -l /dev/mpath | grep [stale LUN]
    For example, if [stale LUN] is 3600d0230003414f30000203a7bc41a00, the following results may appear:
    Copy to Clipboard Toggle word wrap 
    lrwxrwxrwx 1 root root 7 Aug  2 10:33 /3600d0230003414f30000203a7bc41a00 -> ../dm-4
lrwxrwxrwx 1 root root 7 Aug  2 10:33 /3600d0230003414f30000203a7bc41a00p1 -> ../dm-5
    This means that 3600d0230003414f30000203a7bc41a00 is mapped to two mpath links: dm-4 and dm-5.
    As such, the following lines should be deleted from /etc/lvm/.cache:
    Copy to Clipboard Toggle word wrap 
    /dev/dm-4 
/dev/dm-5 
/dev/mapper/3600d0230003414f30000203a7bc41a00
/dev/mapper/3600d0230003414f30000203a7bc41a00p1
/dev/mpath/3600d0230003414f30000203a7bc41a00
/dev/mpath/3600d0230003414f30000203a7bc41a00p1
  • Running the multipath command with the -ll option can cause the command to hang if one of the paths is on a blocking device. Note that the driver does not fail a request after some time if the device does not respond.
    This is caused by the cleanup code, which waits until the path checker request either completes or fails. To display the current multipath state without hanging the command, use multipath -l instead.
  • The system may not successfully reboot into a kexec/kdump kernel if X is running and using a driver other than vesa. This problem only exists with ATI Rage XL graphics chipsets.
    If X is running on a system equipped with ATI Rage XL, ensure that it is using the vesa driver in order to successfully reboot into a kexec/kdump kernel.
  • Upgrading pm-utils from a Red Hat Enterprise Linux 5.2 Beta version of pm-utils will fail, resulting in the following error:
    Copy to Clipboard Toggle word wrap 
    error: unpacking of archive failed on file /etc/pm/sleep.d: cpio: rename
    To prevent this from occurring, delete the /etc/pm/sleep.d/ directory prior to upgrading. If /etc/pm/sleep.d contains any files, move those files to /etc/pm/hooks/.
  • Hardware testing for the Mellanox MT25204 has revealed that an internal error occurs under certain high-load conditions. When the ib_mthca driver reports a catastrophic error on this hardware, it is usually related to an insufficient completion queue depth relative to the number of outstanding work requests generated by the user application.
    Although the driver will reset the hardware and recover from such an event, all existing connections at the time of the error will be lost. This generally results in a segmentation fault in the user application. Further, if opensm is running at the time the error occurs, then you need to manually restart it in order to resume proper operation.
  • Attempting to run sniff may result in an error. This is because some required packages are not installed with dogtail.
    To prevent this from occurring, install the following packages manually:
    • librsvg2
    • ghostscript-fonts
    • pygtk2-libglade
  • It is not possible to configure layer 2 through system-config-network-gui.

9.2. x86 Architectures

  • When running the bare-metal (non-Virtualized) kernel, the X server may not be able to retrieve EDID information from the monitor. When this occurs, the graphics driver will be unable to display resolutions highers than 800x600.
    To work around this, add the following line to the ServerLayout section of /etc/X11/xorg.conf:
    Copy to Clipboard Toggle word wrap 
    Option "Int10Backend" "x86emu"

9.3. x86-64 Architectures

  • Some machines that use NVIDIA graphics cards may display corrupted graphics or fonts when using the graphical installer or during a graphical login. To work around this, switch to a virtual console and back to the original X host.

9.4. PowerPC Architectures

  • When using Alt-SysRq-W to debug, the following warning message will appear:
    Copy to Clipboard Toggle word wrap 
    Badness in smp_call_function at arch/powerpc/kernel/smp.c:223
    Afterwards, the system will also warn that it will hang. This message should be ignored as it will not cause the system to hang.

9.5. s390x Architectures

  • When running Red Hat Enterprise Linux 5.2 on a z/VM that has more than 2GB of guest storage defined, invalid data can be read from and written to any FCP and OSA device attached in QDIO mode with the Queued-I/O assist (QIOASSIST) option enabled. If your system has any such devices attached, Red Hat recommends that you download and install the corresponding z/VM Program Temporary Fix (PTF) from the following link:
    http://www-1.ibm.com/support/docview.wss?uid=isg1VM64306
  • The IBM System z does not provide a traditional Unix-style physical console. As such, Red Hat Enterprise Linux 5.2 for the IBM System z does not support the firstboot functionality during initial program load.
    To properly initialize setup for Red Hat Enterprise Linux 5.2 on the IBM System z, run the following commands after installation:
    • /usr/bin/setup — provided by the setuptool package.
    • /usr/bin/rhn_register — provided by the rhn-setup package.
  • It is not possible to directly read and convert a z/VM dump into a file. Instead, you should first copy the dump from the z/VM reader into a Linux file system using vmur and convert the dump into a Linux-readable file using vmconvert.

9.6. ia64 Architecture

  • Some Itanium systems cannot properly produce console output from the kexec purgatory code. This code contains instructions for backing up the first 640k of memory after a crash.
    While purgatory console output can be useful in diagnosing problems, it is not needed for kdump to properly function. As such, if your Itanium system resets during a kdump operation, disable console output in purgatory by adding --noio to the KEXEC_ARGS variable in /etc/sysconfig/kdump.

10.  Added Packages

dapl-2.0.7-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Library providing access to the DAT 1.2 and 2.0 APIs
  • Description: Copy to Clipboard Toggle word wrap 
    libdat and libdapl provide a userspace implementation of the DAT 1.2 and 2.0
API that is built to natively support InfiniBand/iWARP network technology.
dstat-0.6.6-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Versatile resource statistics tool
  • Description: Copy to Clipboard Toggle word wrap 
    Dstat is a versatile replacement for vmstat, iostat, netstat and ifstat.
Dstat overcomes some of their limitations and adds some extra features,
more counters and flexibility. Dstat is handy for monitoring systems
during performance tuning tests, benchmarks or troubleshooting.

Dstat allows you to view all of your system resources instantly, you
can eg. compare disk usage in combination with interrupts from your
IDE controller, or compare the network bandwidth numbers directly
with the disk throughput (in the same interval).

Dstat gives you detailed selective information in columns and clearly
indicates in what magnitude and unit the output is displayed. Less
confusion, less mistakes.
ecryptfs-utils-41-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    The eCryptfs mount helper and support libraries
  • Description: Copy to Clipboard Toggle word wrap 
    eCryptfs is a stacked cryptographic filesystem that ships in the
Linux kernel. This package provides the mount helper and supporting
libraries to perform key management and mount functions.

Install ecryptfs-utils if you would like to mount eCryptfs.
freeipmi-0.5.1-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    FreeIPMI
  • Description: Copy to Clipboard Toggle word wrap 
    The FreeIPMI project provides "Remote-Console" (out-of-band) and
"System Management Software" (in-band) based on Intelligent
Platform Management Interface specification.

This package contains a Technology Preview for FreeIPMI. Please visit
http://www.redhat.com/support/service/ for details on the Red Hat support
policies.
gtk-vnc-0.3.2-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A GTK widget for VNC clients
  • Description: Copy to Clipboard Toggle word wrap 
    gtk-vnc is a VNC viewer widget for GTK. It is built using coroutines
allowing it to be completely asynchronous while remaining single threaded.
ibsim-0.4-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    InfiniBand fabric simulator for management
  • Description: Copy to Clipboard Toggle word wrap 
    ibsim provides simulation of infiniband fabric for using with OFA OpenSM,
diagnostic and management tools.
infiniband-diags-1.3.6-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    OpenFabrics Alliance InfiniBand Diagnostic Tools
  • Description: Copy to Clipboard Toggle word wrap 
    This package provides IB diagnostic programs and scripts needed to
diagnose an IB subnet.
isns-utils-0.91-0.1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    The iSNS daemon and utility programs
  • Description: Copy to Clipboard Toggle word wrap 
    The iSNS package contains the daemon and tools to setup a iSNS server,
and iSNS client tools. The Internet Storage Name Service (iSNS) protocol
allows automated discovery, management and configuration of iSCSI and
Fibre Channel devices (using iFCP gateways) on a TCP/IP network.
libcxgb3-1.1.4-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Chelsio T3 iWARP HCA Userspace Driver
  • Description: Copy to Clipboard Toggle word wrap 
    Userspace hardware driver for use with the libibverbs InfiniBand/iWARP verbs
library. This driver enables Chelsio iWARP capable ethernet devices.
libehca-1.2-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    IBM InfiniBand HCA Userspace Driver
  • Description: Copy to Clipboard Toggle word wrap 
    IBM hardware driver for use with libibverbs user space verbs access
library.
libibcm-1.0.2-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Userspace InfiniBand Communication Manager.
  • Description: Copy to Clipboard Toggle word wrap 
    libibcm provides a userspace InfiniBand Communication Managment library.
libibcommon-1.0.8-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    OpenFabrics Alliance InfiniBand management common library
  • Description: Copy to Clipboard Toggle word wrap 
    libibcommon provides common utility functions for the OFA diagnostic and
management tools.
libibmad-1.1.6-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    OpenFabrics Alliance InfiniBand MAD library
  • Description: Copy to Clipboard Toggle word wrap 
    libibmad provides low layer IB functions for use by the IB diagnostic
and management programs. These include MAD, SA, SMP, and other basic
IB functions.
libibumad-1.1.7-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    OpenFabrics Alliance InfiniBand umad (user MAD) library
  • Description: Copy to Clipboard Toggle word wrap 
    libibumad provides the user MAD library functions which sit on top of
the user MAD modules in the kernel. These are used by the IB diagnostic
and management tools, including OpenSM.
libibverbs-1.1.1-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Library providing access to InfiniBand/iWARP hardware verbs protocol
  • Description: Copy to Clipboard Toggle word wrap 
    libibverbs is a library that allows userspace processes to use
InfiniBand/iWARP "verbs" as described in the InfiniBand Architecture
Specification. This includes direct hardware access for fast path
operations.

For this library to be useful, a device-specific plug-in module should
also be installed.
libipathverbs-1.1-10.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    QLogic InfiniPath HCA Userspace Driver
  • Description: Copy to Clipboard Toggle word wrap 
    QLogic hardware driver for use with libibverbs user space verbs access
library. This driver supports QLogic InfiniPath based cards.
libmlx4-1.0-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Mellanox ConnectX InfiniBand HCA Userspace Driver
  • Description: Copy to Clipboard Toggle word wrap 
    Mellanox hardware driver for use with libibverbs user space verbs access
library. This driver supports Mellanox ConnectX architecture cards.
libmthca-1.0.4-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Mellanox InfiniBand HCA Userspace Driver
  • Description: Copy to Clipboard Toggle word wrap 
    Mellanox hardware driver for use with libibverbs user space verbs access
library. This driver supports Mellanox based Single Data Rate and Dual Data
Rate cards, including those from Cisco, Topspin, and Voltaire. It does
not support the Connect-X architecture based Quad Data Rate cards (libmlx4
handles that hardware).
libnes-0.5-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    NetEffect RNIC Userspace Driver
  • Description: Copy to Clipboard Toggle word wrap 
    Userspace hardware driver for use with the libibverbs InfiniBand/iWARP verbs
library. This driver enables NetEffect iWARP capable ethernet devices.
librdmacm-1.0.7-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Userspace RDMA Connection Manager.
  • Description: Copy to Clipboard Toggle word wrap 
    librdmacm provides a userspace RDMA Communication Managment API.
libsdp-1.1.99-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A library for direct userspace use of Sockets Direct Protocol
  • Description: Copy to Clipboard Toggle word wrap 
    libsdp is an LD_PRELOAD-able library that can be used to have existing
applications use InfiniBand Sockets Direct Protocol (SDP) instead of
TCP sockets, transparently and without recompilation. For information
on how to configure libsdp, see libsdp.conf, which is installed in
$(sysconfdir) (usually /usr/local/etc or /etc).
libsmi-0.4.5-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A library to access SMI MIB information
  • Description: Copy to Clipboard Toggle word wrap 
    Libsmi is a C library to access MIB module information through
a well defined API that hides the nasty details of locating
and parsing SMIv1/v2 MIB modules.

This package contains tools to check, dump, and convert MIB
definitions and a steadily maintained and revised archive
of all IETF and IANA maintained standard MIB modules.
mpi-selector-1.0.0-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Provides site-wide and per-user MPI implementation selection
  • Description: Copy to Clipboard Toggle word wrap 
    A simple tool that allows system administrators to set a site-wide
default for which MPI implementation is to be used, but also allow
users to set their own default MPI implementation, thereby overriding
the site-wide default.

The default can be changed easily via the mpi-selector command —
editing of shell startup files is not required.
mstflint-1.3-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Mellanox firmware burning tool
  • Description: Copy to Clipboard Toggle word wrap 
    This package contains a burning tool for Mellanox manufactured HCA cards.
It also provides access to the relevant source code.
nspluginwrapper-0.9.91.5-21.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Networking/WWW
  • Summary: Copy to Clipboard Toggle word wrap 
    A compatibility layer for Netscape 4 plugins
  • Description: Copy to Clipboard Toggle word wrap 
    nspluginwrapper makes it possible to use Netscape 4 compatible plugins
compiled for ppc into Mozilla for another architecture, e.g. x86_64.

This package consists in:
* npviewer: the plugin viewer
* npwrapper.so: the browser-side plugin
* mozilla-plugin-config: a tool to manage plugins installation and update
ofed-docs-1.3-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Documentation/Man
  • Summary: Copy to Clipboard Toggle word wrap 
    OpenFabrics Enterprise Distribution documentation
  • Description: Copy to Clipboard Toggle word wrap 
    Documentation from OFED 1.3
opensm-3.1.8-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    OpenIB InfiniBand Subnet Manager and management utilities
  • Description: Copy to Clipboard Toggle word wrap 
    OpenSM is the OpenIB project's Subnet Manager for Infiniband networks.
The subnet manager is run as a system daemon on one of the machines in
the infiniband fabric to manage the fabric's routing state. This package
also contains various tools for diagnosing and testing Infiniband networks
that can be used from any machine and do not need to be run on a machine
running the opensm daemon.
openswan-2.6.12-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    Openswan IPSEC implementation
  • Description: Copy to Clipboard Toggle word wrap 
    Openswan is a free implementation of IPSEC & IKE for Linux. IPSEC is
the Internet Protocol Security and uses strong cryptography to provide
both authentication and encryption services. These services allow you
to build secure tunnels through untrusted networks. Everything passing
through the untrusted net is encrypted by the ipsec gateway machine and
decrypted by the gateway at the other end of the tunnel. The resulting
tunnel is a virtual private network or VPN.

This package contains the daemons and userland tools for setting up
Openswan on a freeswan enabled kernel.
perftest-1.2-10.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Productivity/Networking/Diagnostic
  • Summary: Copy to Clipboard Toggle word wrap 
    IB Performance tests
  • Description: Copy to Clipboard Toggle word wrap 
    gen2 uverbs microbenchmarks
pexpect-2.3-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    Pure Python Expect-like module
  • Description: Copy to Clipboard Toggle word wrap 
    Pexpect is a pure Python module for spawning child applications; controlling
them; and responding to expected patterns in their output. Pexpect works like
Don Libes' Expect. Pexpect allows your script to spawn a child application and
control it as if a human were typing commands.

Pexpect can be used for automating interactive applications such as ssh, ftp,
passwd, telnet, etc. It can be used to automate setup scripts for duplicating
software package installations on different servers. And it can be used for
automated software testing. Pexpect is in the spirit of Don Libes' Expect, but
Pexpect is pure Python. Unlike other Expect-like modules for Python, Pexpect
does not require TCL or Expect nor does it require C extensions to be compiled.
It should work on any platform that supports the standard Python pty module.
python-iniparse-0.2.3-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Python Module for Accessing and Modifying Configuration Data in INI files
  • Description: Copy to Clipboard Toggle word wrap 
    iniparse is an INI parser for Python which is API compatible
with the standard library's ConfigParser, preserves structure of INI
files (order of sections & options, indentation, comments, and blank
lines are preserved when data is updated), and is more convenient to
use.
python-setuptools-0.6c5-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    Download, build, install, upgrade, and uninstall Python packages
  • Description: Copy to Clipboard Toggle word wrap 
    setuptools is a collection of enhancements to the Python distutils that allow
you to more easily build and distribute Python packages, especially ones that
have dependencies on other packages.
qlvnictools-0.0.1-8.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    VNIC ULP service
  • Description: Copy to Clipboard Toggle word wrap 
    VNIC ULP service
qperf-0.4.0-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Networking/Diagnostic
  • Summary: Copy to Clipboard Toggle word wrap 
    Measure socket and RDMA performance
  • Description: Copy to Clipboard Toggle word wrap 
    Measure socket and RDMA performance.
rsyslog-2.0.0-11.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    Enhanced system logging and kernel message trapping daemons
  • Description: Copy to Clipboard Toggle word wrap 
    Rsyslog is an enhanced multi-threaded syslogd supporting, among others, MySQL,
syslog/tcp, RFC 3195, permitted sender lists, filtering on any message part,
and fine grain output format control. It is quite compatible to stock sysklogd
and can be used as a drop-in replacement. Its advanced features make it
suitable for enterprise-class, encryption protected syslog relay chains while
at the same time being very easy to setup for the novice user.
setroubleshoot-plugins-2.0.4-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Analysis plugins for use with setroubleshoot
  • Description: Copy to Clipboard Toggle word wrap 
    This package provides a set of analysis plugins for use with
setroubleshoot. Each plugin has the capacity to analyze SELinux AVC
data and system data to provide user friendly reports describing how
to interpret SELinux AVC denials.
srptools-0.0.4-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Tools for using the InfiniBand SRP protocol devices
  • Description: Copy to Clipboard Toggle word wrap 
    In conjunction with the kernel ib_srp driver, srptools allows you to
discover and use SCSI devices via the SCSI RDMA Protocol over InfiniBand.
system-config-netboot-0.1.45.1-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    network booting/install configuration utility (GUI)
  • Description: Copy to Clipboard Toggle word wrap 
    system-config-netboot is a utility which allows you to configure
diskless environments and network installations.
tpm-tools-1.3.1-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Management tools for the TPM hardware
  • Description: Copy to Clipboard Toggle word wrap 
    tpm-tools is a group of tools to manage and utilize the Trusted Computing
Group's TPM hardware. TPM hardware can create, store and use RSA keys
securely (without ever being exposed in memory), verify a platform's
software state using cryptographic hashes and more.
trousers-0.3.1-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    TCG's Software Stack v1.2
  • Description: Copy to Clipboard Toggle word wrap 
    TrouSerS is an implementation of the Trusted Computing Group's Software Stack
(TSS) specification. You can use TrouSerS to write applications that make use
of your TPM hardware. TPM hardware can create, store and use RSA keys
securely (without ever being exposed in memory), verify a platform's software
state using cryptographic hashes and more.
tvflash-0.9.0-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Tool to manage Mellanox HCA firmware flash memory
  • Description: Copy to Clipboard Toggle word wrap 
    tvflash is used to query and update the firmware flash memory attached
to Mellanox InfiniBand HCAs.
udftools-1.0.0b3-0.1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Archiving
  • Summary: Copy to Clipboard Toggle word wrap 
    Linux UDF Filesystem userspace utilities
  • Description: Copy to Clipboard Toggle word wrap 
    Linux UDF Filesystem userspace utilities.
virt-viewer-0.0.2-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Virtual Machine Viewer
  • Description: Copy to Clipboard Toggle word wrap 
    Virtual Machine Viewer provides a graphical console client for connecting
to virtual machines. It uses the GTK-VNC widget to provide the display,
and libvirt for looking up VNC server details.
wdaemon-0.13-1
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X Hardware Support
  • Summary: Copy to Clipboard Toggle word wrap 
    Hotplug helper for Wacom X.org driver
  • Description: Copy to Clipboard Toggle word wrap 
    Helper application which emulates persistent input devices for Wacom tablets
so they can be plugged and unplugged while X.org server is running. This should
go away as soon X.org properly supports hotplugging.
xulrunner-1.9-0.beta5.6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    XUL Runtime for Gecko Applications
  • Description: Copy to Clipboard Toggle word wrap 
    XULRunner provides the XUL Runtime environment for Gecko applications.
yum-updatesd-0.9-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Update notification daemon
  • Description: Copy to Clipboard Toggle word wrap 
    yum-updatesd provides a daemon which checks for available updates and
can notify you when they are available via email, syslog or dbus.

11.  Dropped Packages

No packages listed here.

12.  Updated Packages

Deployment_Guide-5.1.0-11 - Deployment_Guide-5.2-9
  • Group: Copy to Clipboard Toggle word wrap 
    Documentation
  • Summary: Copy to Clipboard Toggle word wrap 
    Deployment Guide
  • Description: Copy to Clipboard Toggle word wrap 
    This Deployment Guide documents relevant information regarding the
deployment, configuration and administration of Red Hat Enterprise Linux
5.2.
  • No added dependencies
  • No removed dependencies
ImageMagick-6.2.8.0-3.el5.4 - ImageMagick-6.2.8.0-4.el5_1.1
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Multimedia
  • Summary: Copy to Clipboard Toggle word wrap 
    An X application for displaying and manipulating images.
  • Description: Copy to Clipboard Toggle word wrap 
    ImageMagick(TM) is an image display and manipulation tool for the X
Window System. ImageMagick can read and write JPEG, TIFF, PNM, GIF,
and Photo CD image formats. It can resize, rotate, sharpen, color
reduce, or add special effects to an image, and when finished you can
either save the completed work in the original format or a different
one. ImageMagick also includes command line programs for creating
animated or transparent .gifs, creating composite images, creating
thumbnail images, and more.

ImageMagick is one of your choices if you need a program to manipulate
and dis play images. If you want to develop your own applications
which use ImageMagick code or APIs, you need to install
ImageMagick-devel as well.
  • No added dependencies
  • No removed dependencies
NetworkManager-0.6.4-6.el5 - NetworkManager-0.6.4-8.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Network connection manager and user applications
  • Description: Copy to Clipboard Toggle word wrap 
    NetworkManager attempts to keep an active network connection available at all
times. It is intended only for the desktop use-case, and is not intended for
usage on servers.  The point of NetworkManager is to make networking
configuration and setup as painless and automatic as possible. If using DHCP,
NetworkManager is _intended_ to replace default routes, obtain IP addresses
from a DHCP server, and change nameservers whenever it sees fit.
  • Added Dependencies:
    • autoconf
    • automake
    • intltool
    • libtool
  • No removed dependencies
OpenIPMI-2.0.6-5.el5.4 - OpenIPMI-2.0.6-6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    OpenIPMI (Intelligent Platform Management Interface) library and tools
  • Description: Copy to Clipboard Toggle word wrap 
    The Open IPMI project aims to develop an open code base to allow access to
platform information using Intelligent Platform Management Interface (IPMI).
This package contains the tools of the OpenIPMI project.
  • No added dependencies
  • No removed dependencies
Virtualization-5.1.0-12 - Virtualization-5.2-9
  • Group: Copy to Clipboard Toggle word wrap 
    Documentation
  • Summary: Copy to Clipboard Toggle word wrap 
    Virtualization Guide
  • Description: Copy to Clipboard Toggle word wrap 
    The Red Hat Enterprise Linux Virtualization Guide contains
information on installation, configuring, administering, tips,
tricks and troubleshooting Virtualization technologies used in Red
Hat Enterprise Linux.
  • No added dependencies
  • No removed dependencies
a2ps-4.13b-57.1.el5 - a2ps-4.13b-57.2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Publishing
  • Summary: Copy to Clipboard Toggle word wrap 
    Converts text and other types of files to PostScript(TM).
  • Description: Copy to Clipboard Toggle word wrap 
    The a2ps filter converts text and other types of files to PostScript(TM).
A2ps has pretty-printing capabilities and includes support for a wide
number of programming languages, encodings (ISO Latins, Cyrillic, etc.),
and medias.
  • Added Dependencies:
    • psutils
  • No removed dependencies
acl-2.2.39-2.1.el5 - acl-2.2.39-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Access control list utilities.
  • Description: Copy to Clipboard Toggle word wrap 
    This package contains the getfacl and setfacl utilities needed for
manipulating access control lists.
  • No added dependencies
  • No removed dependencies
alsa-utils-1.0.14-2.rc4.el5 - alsa-utils-1.0.14-3.rc4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Multimedia
  • Summary: Copy to Clipboard Toggle word wrap 
    Advanced Linux Sound Architecture (ALSA) utilities
  • Description: Copy to Clipboard Toggle word wrap 
    This package contains command line utilities for the Advanced Linux Sound
Architecture (ALSA).
  • No added dependencies
  • No removed dependencies
amtu-1.0.4-4 - amtu-1.0.6-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Abstract Machine Test Utility (AMTU)
  • Description: Copy to Clipboard Toggle word wrap 
    Abstract Machine Test Utility (AMTU) is an administrative utility to check
whether the underlying protection mechanism of the hardware are still being
enforced. This is a requirement of the Controlled Access Protection Profile
FPT_AMT.1, see
http://www.radium.ncsc.mil/tpep/library/protection_profiles/CAPP-1.d.pdf
  • No added dependencies
  • No removed dependencies
anaconda-11.1.2.87-1 - anaconda-11.1.2.113-1
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Graphical system installer
  • Description: Copy to Clipboard Toggle word wrap 
    The anaconda package contains the program which was used to install your
system. These files are of little use on an already installed system.
  • Added Dependencies:
    • libdhcp-devel >= 1.20-5
    • libnl-devel >= 1.0-0.10.pre5.5
  • Removed Dependencies:
    • glib2-devel >= 2.11.1-5
    • libdhcp-devel >= 1.16
apr-util-1.2.7-6 - apr-util-1.2.7-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Apache Portable Runtime Utility library
  • Description: Copy to Clipboard Toggle word wrap 
    The mission of the Apache Portable Runtime (APR) is to provide a
free library of C data structures and routines. This library
contains additional utility interfaces for APR; including support
for XML, LDAP, database interfaces, URI parsing and more.
  • No added dependencies
  • No removed dependencies
at-spi-1.7.11-2.fc6 - at-spi-1.7.11-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Assistive Technology Service Provider Interface
  • Description: Copy to Clipboard Toggle word wrap 
    at-spi allows assistive technologies to access GTK-based
applications. Essentially it exposes the internals of applications for
automation, so tools such as screen readers, magnifiers, or even
scripting interfaces can query and interact with GUI controls.
  • No added dependencies
  • No removed dependencies
audit-1.5.5-7.el5 - audit-1.6.5-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    User space tools for 2.6 kernel auditing
  • Description: Copy to Clipboard Toggle word wrap 
    The audit package contains the user space utilities for
storing and searching the audit records generate by
the audit subsystem in the Linux 2.6 kernel.
  • Added Dependencies:
    • checkpolicy
    • openldap-devel
    • selinux-policy-devel
  • No removed dependencies
authconfig-5.3.12-2.el5 - authconfig-5.3.21-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Command line tool for setting up authentication from network services
  • Description: Copy to Clipboard Toggle word wrap 
    Authconfig is a command line utility which can configure a workstation
to use shadow (more secure) passwords. Authconfig can also configure a
system to be a client for certain networked user information and
authentication schemes.
  • Added Dependencies:
    • python >= 2.4.1
  • Removed Dependencies:
    • python
autofs-5.0.1-0.rc2.55 - autofs-5.0.1-0.rc2.88
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    A tool for automatically mounting and unmounting filesystems.
  • Description: Copy to Clipboard Toggle word wrap 
    autofs is a daemon which automatically mounts filesystems when you use
them, and unmounts them later when you are not using them. This can
include network filesystems, CD-ROMs, floppies, and so forth.
  • No added dependencies
  • No removed dependencies
bash-3.1-16.1 - bash-3.2-21.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Shells
  • Summary: Copy to Clipboard Toggle word wrap 
    The GNU Bourne Again shell (bash) version 3.2
  • Description: Copy to Clipboard Toggle word wrap 
    The GNU Bourne Again shell (Bash) is a shell or command language
interpreter that is compatible with the Bourne shell (sh). Bash
incorporates useful features from the Korn shell (ksh) and the C shell
(csh). Most sh scripts can be run by bash without modification. This
package (bash) contains bash version 3.2, which improves POSIX
compliance over previous versions.
  • Added Dependencies:
    • autoconf
    • gettext
  • No removed dependencies
bind-9.3.3-10.el5 - bind-9.3.4-6.P1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    The Berkeley Internet Name Domain (BIND) DNS (Domain Name System) server.
  • Description: Copy to Clipboard Toggle word wrap 
    BIND (Berkeley Internet Name Domain) is an implementation of the DNS
(Domain Name System) protocols. BIND includes a DNS server (named),
which resolves host names to IP addresses; a resolver library
(routines for applications to use when interfacing with DNS); and
tools for verifying that the DNS server is operating properly.
  • No added dependencies
  • No removed dependencies
binutils-2.17.50.0.6-5.el5 - binutils-2.17.50.0.6-6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Tools
  • Summary: Copy to Clipboard Toggle word wrap 
    A GNU collection of binary utilities.
  • Description: Copy to Clipboard Toggle word wrap 
    Binutils is a collection of binary utilities, including ar (for
creating, modifying and extracting from archives), as (a family of GNU
assemblers), gprof (for displaying call graph profile data), ld (the
GNU linker), nm (for listing symbols from object files), objcopy (for
copying and translating object files), objdump (for displaying
information from object files), ranlib (for generating an index for
the contents of an archive), size (for listing the section sizes of an
object or archive file), strings (for listing printable strings from
files), strip (for discarding symbols), and addr2line (for converting
addresses to file and line).
  • No added dependencies
  • No removed dependencies
booty-0.80.4-5 - booty-0.80.4-6
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    simple python bootloader config lib
  • Description: Copy to Clipboard Toggle word wrap 
    Small python library for use with bootloader configuration by anaconda
and up2date.
  • No added dependencies
  • No removed dependencies
busybox-1.2.0-3 - busybox-1.2.0-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Shells
  • Summary: Copy to Clipboard Toggle word wrap 
    Statically linked binary providing simplified versions of system commands
  • Description: Copy to Clipboard Toggle word wrap 
    Busybox is a single binary which includes versions of a large number
of system commands, including a shell. This package can be very
useful for recovering from certain types of system failures,
particularly those involving broken shared libraries.
  • No added dependencies
  • No removed dependencies
cachefilesd-0.8-2.el5 - cachefilesd-0.8-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    CacheFiles userspace management daemon
  • Description: Copy to Clipboard Toggle word wrap 
    The cachefilesd daemon manages the caching files and directory that are
that are used by network filesystems such a AFS and NFS to
do persistent caching to the local disk.
  • No added dependencies
  • No removed dependencies
cairo-1.2.4-2.el5 - cairo-1.2.4-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A vector graphics library
  • Description: Copy to Clipboard Toggle word wrap 
    Cairo is a vector graphics library designed to provide high-quality
display and print output. Currently supported output targets include
the X Window System, OpenGL (via glitz), in-memory image buffers, and
image files (PDF, PostScript, and SVG). Cairo is designed to produce
identical output on all output media while taking advantage of display
hardware acceleration when available (eg. through the X Render
Extension or OpenGL).
  • No added dependencies
  • No removed dependencies
checkpolicy-1.33.1-2.el5 - checkpolicy-1.33.1-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/System
  • Summary: Copy to Clipboard Toggle word wrap 
    SELinux policy compiler
  • Description: Copy to Clipboard Toggle word wrap 
    Security-enhanced Linux is a feature of the Linux® kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.

This package contains checkpolicy, the SELinux policy compiler.
Only required for building policies.
  • No added dependencies
  • No removed dependencies
chkconfig-1.3.30.1-1 - chkconfig-1.3.30.1-2
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A system tool for maintaining the /etc/rc*.d hierarchy.
  • Description: Copy to Clipboard Toggle word wrap 
    Chkconfig is a basic system utility. It updates and queries runlevel
information for system services. Chkconfig manipulates the numerous
symbolic links in /etc/rc.d, to relieve system administrators of some
of the drudgery of manually editing the symbolic links.
  • No added dependencies
  • No removed dependencies
clustermon-0.10.0-5.el5 - clustermon-0.12.0-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Monitoring and management of Red Hat Enterprise Linux Cluster Suite
  • Description: Copy to Clipboard Toggle word wrap 
    This package contains Red Hat Enterprise Linux Cluster Suite
SNMP/CIM module/agent/provider.
  • Added Dependencies:
    • cman-devel
  • No removed dependencies
cman-2.0.73-1.el5 - cman-2.0.84-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    cman - The Cluster Manager
  • Description: Copy to Clipboard Toggle word wrap 
    cman - The Cluster Manager
  • Added Dependencies:
    • kernel-headers
  • No removed dependencies
conga-0.10.0-6.el5 - conga-0.12.0-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Remote Management System
  • Description: Copy to Clipboard Toggle word wrap 
    Conga is a project developing management system for remote stations.
It consists of luci, https frontend, and ricci, secure daemon that dispatches
incoming messages to underlying management modules.
  • No added dependencies
  • Removed Dependencies:
    • cman-devel
control-center-2.16.0-14.el5 - control-center-2.16.0-16.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/Desktops
  • Summary: Copy to Clipboard Toggle word wrap 
    GNOME Control Center
  • Description: Copy to Clipboard Toggle word wrap 
    GNOME (the GNU Network Object Model Environment) is an attractive and
easy-to-use GUI desktop environment. The control-center package
provides the GNOME Control Center utilities that allow you to setup
and configure your system's GNOME environment (things like the desktop
background and theme, the screensaver, system sounds, and mouse
behavior).

If you install GNOME, you need to install control-center.
  • No added dependencies
  • No removed dependencies
coolkey-1.1.0-5.el5 - coolkey-1.1.0-6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    CoolKey PKCS #11 module
  • Description: Copy to Clipboard Toggle word wrap 
    Linux Driver support for the CoolKey and CAC products.
  • No added dependencies
  • No removed dependencies
coreutils-5.97-12.1.el5 - coreutils-5.97-14.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    The GNU core utilities: a set of tools commonly used in shell scripts
  • Description: Copy to Clipboard Toggle word wrap 
    These are the GNU core utilities. This package is the combination of
the old GNU fileutils, sh-utils, and textutils packages.
  • No added dependencies
  • No removed dependencies
cpuspeed-1.2.1-1.48.el5 - cpuspeed-1.2.1-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    CPU frequency adjusting daemon
  • Description: Copy to Clipboard Toggle word wrap 
    cpuspeed is a daemon that dynamically changes the speed
of your processor(s) depending upon its current workload
if it is capable (needs Intel Speedstep, AMD PowerNow!,
or similar support).

This package also supports enabling cpu frequency scaling
via in-kernel governors on Intel Centrino and AMD
Athlon64/Opteron platforms.
  • No added dependencies
  • No removed dependencies
crash-4.0-4.6.1 - crash-4.0-5.0.3
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Debuggers
  • Summary: Copy to Clipboard Toggle word wrap 
    crash utility for live systems; netdump, diskdump, kdump, LKCD or mcore dumpfiles
  • Description: Copy to Clipboard Toggle word wrap 
    The core analysis suite is a self-contained tool that can be used to
investigate either live systems, kernel core dumps created from the
netdump, diskdump and kdump packages from Red Hat Linux, the mcore kernel patch
offered by Mission Critical Linux, or the LKCD kernel patch.
  • No added dependencies
  • No removed dependencies
createrepo-0.4.4-2.fc6 - createrepo-0.4.11-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Creates a common metadata repository
  • Description: Copy to Clipboard Toggle word wrap 
    This utility will generate a common metadata repository from a directory of rpm
packages.
  • Added Dependencies:
    • python
  • No removed dependencies
crypto-utils-2.3-1 - crypto-utils-2.3-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    SSL certificate and key management utilities
  • Description: Copy to Clipboard Toggle word wrap 
    This package provides tools for managing and generating
SSL certificates and keys.
  • No added dependencies
  • No removed dependencies
cups-1.2.4-11.14.el5 - cups-1.2.4-11.18.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    Common Unix Printing System
  • Description: Copy to Clipboard Toggle word wrap 
    The Common UNIX Printing System provides a portable printing layer for
UNIX® operating systems. It has been developed by Easy Software Products
to promote a standard printing solution for all UNIX vendors and users.
CUPS provides the System V and Berkeley command-line interfaces.
  • No added dependencies
  • No removed dependencies
cyrus-imapd-2.3.7-1.1.el5 - cyrus-imapd-2.3.7-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    A high-performance mail server with IMAP, POP3, NNTP and SIEVE support
  • Description: Copy to Clipboard Toggle word wrap 
    The cyrus-imapd package contains the core of the Cyrus IMAP server.
It is a scaleable enterprise mail system designed for use from
small to large enterprise environments using standards-based
internet mail technologies.

A full Cyrus IMAP implementation allows a seamless mail and bulletin
board environment to be set up across multiple servers. It differs from
other IMAP server implementations in that it is run on "sealed"
servers, where users are not normally permitted to log in and have no
system account on the server. The mailbox database is stored in parts
of the filesystem that are private to the Cyrus IMAP server. All user
access to mail is through software using the IMAP, POP3 or KPOP
protocols. It also includes support for virtual domains, NNTP,
mailbox annotations, and much more. The private mailbox database design
gives the server large advantages in efficiency, scalability and
administratability. Multiple concurrent read/write connections to the
same mailbox are permitted. The server supports access control lists on
mailboxes and storage quotas on mailbox hierarchies.

The Cyrus IMAP server supports the IMAP4rev1 protocol described
in RFC 3501. IMAP4rev1 has been approved as a proposed standard.
It supports any authentication mechanism available from the SASL
library, imaps/pop3s/nntps (IMAP/POP3/NNTP encrypted using SSL and
TLSv1) can be used for security. The server supports single instance
store where possible when an email message is addressed to multiple
recipients, SIEVE provides server side email filtering.
  • No added dependencies
  • No removed dependencies
dbus-1.0.0-6.el5 - dbus-1.0.0-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    D-BUS message bus
  • Description: Copy to Clipboard Toggle word wrap 
    
D-BUS is a system for sending messages between applications. It is
used both for the systemwide message bus service, and as a
per-user-login-session messaging facility.
  • No added dependencies
  • No removed dependencies
desktop-printing-0.19-20.el5 - desktop-printing-0.19-20.1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/File
  • Summary: Copy to Clipboard Toggle word wrap 
    Desktop print icon
  • Description: Copy to Clipboard Toggle word wrap 
    Desktop-printing contains eggcups, a program for user print job
notification and control.
  • No added dependencies
  • No removed dependencies
devhelp-0.12-11.el5 - devhelp-0.12-16.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Tools
  • Summary: Copy to Clipboard Toggle word wrap 
    API document browser
  • Description: Copy to Clipboard Toggle word wrap 
    An API document browser for GNOME 2.
  • Added Dependencies:
    • gecko-devel-unstable = 1.9
  • Removed Dependencies:
    • gecko-devel = 1.8.0.12
device-mapper-1.02.20-1.el5 - device-mapper-1.02.24-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    device mapper library
  • Description: Copy to Clipboard Toggle word wrap 
    This package contains the supporting userspace files (libdevmapper and
dmsetup) for the device-mapper.
  • No added dependencies
  • No removed dependencies
device-mapper-multipath-0.4.7-12.el5 - device-mapper-multipath-0.4.7-17.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Tools to manage multipath devices using device-mapper.
  • Description: Copy to Clipboard Toggle word wrap 
    device-mapper-multipath provides tools to manage multipath devices by instructing the
device-mapper multipath kernel module what to do.
The tools are :
* multipath :  Scan the system for multipath devices and assemble them.
* multipathd : Detects when paths fail and execs multipath to update things.
  • No added dependencies
  • No removed dependencies
dhcp-3.0.5-7.el5 - dhcp-3.0.5-13.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    DHCP (Dynamic Host Configuration Protocol) server and relay agent.
  • Description: Copy to Clipboard Toggle word wrap 
    DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
individual devices on an IP network to get their own network
configuration information (IP address, subnetmask, broadcast address,
etc.) from a DHCP server. The overall purpose of DHCP is to make it
easier to administer a large network. The dhcp package includes the
ISC DHCP service and relay agent.

To use DHCP on your network, install a DHCP service (or relay agent),
and on clients run a DHCP client daemon. The dhcp package provides
the ISC DHCP service and relay agent.
  • No added dependencies
  • No removed dependencies
dhcpv6-0.10-33.el5 - dhcpv6-1.0.10-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    DHCPv6 - DHCP server and client for IPv6
  • Description: Copy to Clipboard Toggle word wrap 
    Implements the Dynamic Host Configuration Protocol (DHCP) for Internet
Protocol version 6 (IPv6) networks in accordance with RFC 3315: Dynamic Host
Configuration Protocol for IPv6 (DHCPv6). Consists of dhcp6s(8), the server
DHCP daemon, and dhcp6r(8), the DHCPv6 relay agent.

Install this package if you want to support dynamic configuration of IPv6
addresses and parameters on your IPv6 network.
  • Added Dependencies:
    • kernel-headers
  • Removed Dependencies:
    • openssl-devel
diffutils-2.8.1-15.2.2 - diffutils-2.8.1-15.2.3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Text
  • Summary: Copy to Clipboard Toggle word wrap 
    A GNU collection of diff utilities.
  • Description: Copy to Clipboard Toggle word wrap 
    Diffutils includes four utilities: diff, cmp, diff3 and sdiff. Diff
compares two files and shows the differences, line by line. The cmp
command shows the offset and line numbers where two files differ, or
cmp can show the characters that differ between the two files. The
diff3 command shows the differences between three files. Diff3 can be
used when two people have made independent changes to a common
original; diff3 can produce a merged file that contains both sets of
changes and warnings about conflicts. The sdiff command can be used
to merge two files interactively.

Install diffutils if you need to compare text files.
  • No added dependencies
  • No removed dependencies
dmraid-1.0.0.rc13-4.el5 - dmraid-1.0.0.rc13-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    dmraid (Device-mapper RAID tool and library)
  • Description: Copy to Clipboard Toggle word wrap 
    DMRAID supports RAID device discovery, RAID set activation and display of
properties for ATARAID on Linux >= 2.4 using device-mapper.
  • No added dependencies
  • No removed dependencies
dovecot-1.0-1.2.rc15.el5 - dovecot-1.0.7-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    Dovecot Secure imap server
  • Description: Copy to Clipboard Toggle word wrap 
    Dovecot is an IMAP server for Linux/UNIX-like systems, written with security
primarily in mind. It also contains a small POP3 server. It supports mail
in either of maildir or mbox formats.
  • No added dependencies
  • No removed dependencies
dvgrab-2.0-1.2.2 - dvgrab-3.0-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Multimedia
  • Summary: Copy to Clipboard Toggle word wrap 
    Utility to capture video from a DV camera
  • Description: Copy to Clipboard Toggle word wrap 
    The dvgrab utility will capture digital video from a DV source on the firewire
(IEEE-1394) bus.
  • No added dependencies
  • No removed dependencies
e2fsprogs-1.39-10.el5 - e2fsprogs-1.39-15.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Utilities for managing the second and third extended (ext2/ext3) filesystems
  • Description: Copy to Clipboard Toggle word wrap 
    The e2fsprogs package contains a number of utilities for creating,
checking, modifying, and correcting any inconsistencies in second
and third extended (ext2/ext3) filesystems. E2fsprogs contains
e2fsck (used to repair filesystem inconsistencies after an unclean
shutdown), mke2fs (used to initialize a partition to contain an
empty ext2 filesystem), debugfs (used to examine the internal
structure of a filesystem, to manually repair a corrupted
filesystem, or to create test cases for e2fsck), tune2fs (used to
modify filesystem parameters), and most of the other core ext2fs
filesystem utilities.

You should install the e2fsprogs package if you need to manage the
performance of an ext2 and/or ext3 filesystem.
  • No added dependencies
  • No removed dependencies
eclipse-3.2.1-18.el5 - eclipse-3.2.1-19.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Text Editors/Integrated Development Environments (IDE)
  • Summary: Copy to Clipboard Toggle word wrap 
    An open, extensible IDE
  • Description: Copy to Clipboard Toggle word wrap 
    The Eclipse Platform is designed for building integrated development
environments (IDEs) that can be used to create applications as diverse
as web sites, embedded Java(tm) programs, C++ programs, and Enterprise
JavaBeans(tm).
  • No added dependencies
  • Removed Dependencies:
    • firefox-devel
    • nspr-devel
emacs-21.4-19.el5 - emacs-21.4-20.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Editors
  • Summary: Copy to Clipboard Toggle word wrap 
    GNU Emacs text editor
  • Description: Copy to Clipboard Toggle word wrap 
    Emacs is a powerful, customizable, self-documenting, modeless text
editor. Emacs contains special code editing features, a scripting
language (elisp), and the capability to read mail, news, and more
without leaving the editor.

This package provides an emacs binary with support for X windows.
  • No added dependencies
  • No removed dependencies
emacspeak-23.0-2.1 - emacspeak-23.0-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Editors
  • Summary: Copy to Clipboard Toggle word wrap 
    emacspeak — The Complete Audio Desktop
  • Description: Copy to Clipboard Toggle word wrap 
    Emacspeak is a speech interface that allows visually impaired users to
interact independently and efficiently with the computer. Emacspeak has
dramatically changed how the author and hundreds of blind and visually
impaired users around the world interact with the personal computer and
the Internet. A rich suite of task-oriented speech-enabled tools provides
efficient speech-enabled access to the evolving semantic WWW.
When combined with Linux running on low-cost PC hardware,
Emacspeak/Linux provides a reliable, stable speech-friendly solution that
opens up the Internet to visually impaired users around the world.
  • No added dependencies
  • No removed dependencies
esc-1.0.0-32.el5 - esc-1.0.0-33.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    Enterprise Security Client Smart Card Client
  • Description: Copy to Clipboard Toggle word wrap 
    Enterprise Security Client allows the user to enroll and manage their
cryptographic smartcards.
  • No added dependencies
  • No removed dependencies
evolution-data-server-1.8.0-25.el5 - evolution-data-server-1.12.3-6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Backend data server for Evolution
  • Description: Copy to Clipboard Toggle word wrap 
    The evolution-data-server package provides a unified backend for programs
that work with contacts, tasks, and calendar information.

It was originally developed for Evolution (hence the name), but is now used
by other packages.
  • Added Dependencies:
    • gtk-doc
    • intltool >= 0.35.0
    • openldap-evolution-devel
    • openssl-devel
  • Removed Dependencies:
    • intltool
    • openldap-devel >= 2.0.11
file-4.17-9.0.1.el5 - file-4.17-13
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/File
  • Summary: Copy to Clipboard Toggle word wrap 
    A utility for determining file types.
  • Description: Copy to Clipboard Toggle word wrap 
    The file command is used to identify a particular file according to the
type of data contained by the file. File can identify many different
file types, including ELF binaries, system libraries, RPM packages, and
different graphics formats.

You should install the file package, since the file command is such a
useful utility.
  • No added dependencies
  • No removed dependencies
firefox-1.5.0.12-3.el5 - firefox-3.0-0.beta5.6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    Mozilla Firefox Web browser
  • Description: Copy to Clipboard Toggle word wrap 
    Mozilla Firefox is an open-source web browser, designed for standards
compliance, performance and portability.
  • Added Dependencies:
    • startup-notification-devel
    • xulrunner-devel >= 1.9-0.beta5.6
    • xulrunner-devel-unstable >= 1.9-0.beta5.6
  • Removed Dependencies:
    • cairo-devel >= 0.5
    • libjpeg-devel
    • libpng-devel
    • nspr-devel >= 4.6
    • nss-devel >= 3.11.1
    • zlib-devel
flac-1.1.2-27 - flac-1.1.2-28.el5_0.1
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Multimedia
  • Summary: Copy to Clipboard Toggle word wrap 
    An encoder/decoder for the Free Lossless Audio Codec.
  • Description: Copy to Clipboard Toggle word wrap 
    FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC
is similar to Ogg Vorbis, but lossless. The FLAC project consists of
the stream format, reference encoders and decoders in library form,
flac, a command-line program to encode and decode FLAC files, metaflac,
a command-line metadata editor for FLAC files and input plugins for
various music players.
  • No added dependencies
  • No removed dependencies
fontconfig-2.4.1-6.el5 - fontconfig-2.4.1-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Font configuration and customization library
  • Description: Copy to Clipboard Toggle word wrap 
    Fontconfig is designed to locate fonts within the
system and select them according to requirements specified by
applications.
  • No added dependencies
  • No removed dependencies
fonts-indic-2.0.13-1.el5 - fonts-indic-2.1.7-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X
  • Summary: Copy to Clipboard Toggle word wrap 
    Free Indian truetype/opentype fonts
  • Description: Copy to Clipboard Toggle word wrap 
    This package provides the Hindi, Bengali, Gujarati, Punjabi, Tamil, Kannada, Malayalam, Oriya, Telugu TrueType/Opentype fonts.
  • No added dependencies
  • No removed dependencies
frysk-0.0.1.2007.06.21.rh2-4.el5 - frysk-0.0.1.2008.03.19.rh1-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Frysk execution analysis tool
  • Description: Copy to Clipboard Toggle word wrap 
    Frysk is an execution-analysis technology implemented using native Java and C++.
It is aimed at providing developers and sysadmins with the ability to both
examine and analyze running multi-host, multi-process, multi-threaded systems.
Frysk allows the monitoring of running processes and threads, of locking
primitives and will also expose deadlocks, gather data and debug any given
process in the system.
  • Added Dependencies:
    • eclipse-ecj
  • Removed Dependencies:
    • /lib/libc.so.6
    • /lib64/libc.so.6
    • /usr/lib/libc.so
    • /usr/lib64/libc.so
    • binutils-devel
    • libgconf-java-devel
gcc-4.1.2-14.el5 - gcc-4.1.2-42.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    Various compilers (C, C++, Objective-C, Java, ...)
  • Description: Copy to Clipboard Toggle word wrap 
    The gcc package contains the GNU Compiler Collection version 4.1.
You'll need this package in order to compile C code.
  • Added Dependencies:
    • xulrunner-devel
  • Removed Dependencies:
    • firefox-devel
gd-2.0.33-9.3.fc6 - gd-2.0.33-9.4.el5_1.1
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A graphics library for quick creation of PNG or JPEG images
  • Description: Copy to Clipboard Toggle word wrap 
    The gd graphics library allows your code to quickly draw images
complete with lines, arcs, text, multiple colors, cut and paste from
other images, and flood fills, and to write out the result as a PNG or
JPEG file. This is particularly useful in Web applications, where PNG
and JPEG are two of the formats accepted for inline images by most
browsers. Note that gd is not a paint program.
  • No added dependencies
  • No removed dependencies
gdb-6.5-25.el5 - gdb-6.5-37.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Debuggers
  • Summary: Copy to Clipboard Toggle word wrap 
    A GNU source-level debugger for C, C++, Java and other languages.
  • Description: Copy to Clipboard Toggle word wrap 
    GDB, the GNU debugger, allows you to debug programs written in C, C++,
Java, and other languages, by executing them in a controlled fashion
and printing their data.
  • No added dependencies
  • No removed dependencies
gdm-2.16.0-31.0.1.el5 - gdm-2.16.0-46.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X
  • Summary: Copy to Clipboard Toggle word wrap 
    The GNOME Display Manager.
  • Description: Copy to Clipboard Toggle word wrap 
    Gdm (the GNOME Display Manager) is a highly configurable
reimplementation of xdm, the X Display Manager. Gdm allows you to log
into your system with the X Window System running and supports running
several different X sessions on your local machine at the same time.
  • No added dependencies
  • No removed dependencies
gedit-2.16.0-5.el5 - gedit-2.16.0-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Editors
  • Summary: Copy to Clipboard Toggle word wrap 
    gEdit is a small but powerful text editor for GNOME
  • Description: Copy to Clipboard Toggle word wrap 
    gEdit is a small but powerful text editor designed specifically for
the GNOME GUI desktop. gEdit includes a plug-in API (which supports
extensibility while keeping the core binary small), support for
editing multiple documents using notebook tabs, and standard text
editor functions.

You'll need to have GNOME and GTK+ installed to use gEdit.
  • No added dependencies
  • No removed dependencies
gfs-kmod-0.1.19-7.el5 - gfs-kmod-0.1.23-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Kernel
  • Summary: Copy to Clipboard Toggle word wrap 
    gfs kernel modules
  • Description: Copy to Clipboard Toggle word wrap 
    gfs - The Global File System is a symmetric, shared-disk, cluster file
system.
  • Added Dependencies:
    • kernel-devel-ia64 = 2.6.18-92.el5
    • kernel-xen-devel-ia64 = 2.6.18-92.el5
  • Removed Dependencies:
    • kernel-devel-ia64 = 2.6.18-53.el5
    • kernel-xen-devel-ia64 = 2.6.18-53.el5
gfs-utils-0.1.12-1.el5 - gfs-utils-0.1.17-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Kernel
  • Summary: Copy to Clipboard Toggle word wrap 
    Utilities for managing the global filesystem (GFS)
  • Description: Copy to Clipboard Toggle word wrap 
    The gfs-utils package contains a number of utilities for creating,
checking, modifying, and correcting any inconsistencies in GFS
filesystems.
  • No added dependencies
  • No removed dependencies
gfs2-kmod-1.52-1.16.el5 - gfs2-kmod-1.92-1.1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Kernel
  • Summary: Copy to Clipboard Toggle word wrap 
    gfs2 kernel module
  • Description: Copy to Clipboard Toggle word wrap 
    GFS2 - The GFS2 filesystem provided for RHEL5.
  • Added Dependencies:
    • kernel-devel-ia64 = 2.6.18-92.el5
    • kernel-xen-devel-ia64 = 2.6.18-92.el5
  • Removed Dependencies:
    • kernel-devel-ia64 = 2.6.18-53.el5
    • kernel-xen-devel-ia64 = 2.6.18-53.el5
gfs2-utils-0.1.38-1.el5 - gfs2-utils-0.1.44-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Kernel
  • Summary: Copy to Clipboard Toggle word wrap 
    Utilities for managing the global filesystem (GFS)
  • Description: Copy to Clipboard Toggle word wrap 
    The gfs2-utils package contains a number of utilities for creating,
checking, modifying, and correcting any inconsistencies in GFS
filesystems.
  • No added dependencies
  • No removed dependencies
ghostscript-8.15.2-9.1.el5 - ghostscript-8.15.2-9.1.el5_1.1
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Publishing
  • Summary: Copy to Clipboard Toggle word wrap 
    A PostScript(TM) interpreter and renderer.
  • Description: Copy to Clipboard Toggle word wrap 
    Ghostscript is a set of software that provides a PostScript(TM)
interpreter, a set of C procedures (the Ghostscript library, which
implements the graphics capabilities in the PostScript language) and
an interpreter for Portable Document Format (PDF) files. Ghostscript
translates PostScript code into many common, bitmapped formats, like
those understood by your printer or screen. Ghostscript is normally
used to display PostScript files and to print PostScript files to
non-PostScript printers.

If you need to display PostScript files or print them to
non-PostScript printers, you should install ghostscript. If you
install ghostscript, you also need to install the ghostscript-fonts
package.
  • No added dependencies
  • No removed dependencies
glibc-2.5-18 - glibc-2.5-24
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    The GNU libc libraries.
  • Description: Copy to Clipboard Toggle word wrap 
    The glibc package contains standard libraries which are used by
multiple programs on the system. In order to save disk space and
memory, as well as to make upgrading easier, common system code is
kept in one place and shared between programs. This particular package
contains the most important sets of shared libraries: the standard C
library and the standard math library. Without these two libraries, a
Linux system will not function.
  • No added dependencies
  • No removed dependencies
gnome-panel-2.16.1-6.el5 - gnome-panel-2.16.1-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/Desktops
  • Summary: Copy to Clipboard Toggle word wrap 
    GNOME panel
  • Description: Copy to Clipboard Toggle word wrap 
    The GNOME panel provides the window list, workspace switcher, menus, and other
features for the GNOME desktop.
  • No added dependencies
  • No removed dependencies
gnome-power-manager-2.16.0-8.el5 - gnome-power-manager-2.16.0-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    GNOME Power Manager
  • Description: Copy to Clipboard Toggle word wrap 
    GNOME Power Manager uses the information and facilities provided by HAL
displaying icons and handling user callbacks in an interactive GNOME session.
GNOME Power Preferences allows authorised users to set policy and
change preferences.
  • No added dependencies
  • No removed dependencies
gnome-python2-desktop-2.16.0-1.fc6 - gnome-python2-desktop-2.16.0-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    The sources for additional PyGNOME Python extension modules for the GNOME desktop
  • Description: Copy to Clipboard Toggle word wrap 
    The gnome-python-desktop package contains the source packages for additional
Python bindings for GNOME. It should be used together with gnome-python.
  • No added dependencies
  • No removed dependencies
gnome-python2-extras-2.14.2-4.fc6 - gnome-python2-extras-2.14.2-6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    The sources for additional. PyGNOME Python extension modules.
  • Description: Copy to Clipboard Toggle word wrap 
    The gnome-python-extra package contains the source packages for additional
Python bindings for GNOME. It should be used together with gnome-python.
  • Added Dependencies:
    • gecko-devel-unstable >= 1.9
  • Removed Dependencies:
    • firefox-devel >= 1.5.0.5
gnome-screensaver-2.16.1-5.el5 - gnome-screensaver-2.16.1-8.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Amusements/Graphics
  • Summary: Copy to Clipboard Toggle word wrap 
    GNOME Screensaver
  • Description: Copy to Clipboard Toggle word wrap 
    gnome-screensaver is a screen saver and locker that aims to have
simple, sane, secure defaults and be well integrated with the desktop.
  • Added Dependencies:
    • libXxf86misc-devel
    • libXxf86vm-devel
  • No removed dependencies
gnome-utils-2.16.0-3.el5 - gnome-utils-2.16.0-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    GNOME utility programs
  • Description: Copy to Clipboard Toggle word wrap 
    GNOME (GNU Network Object Model Environment) is a user-friendly set of
GUI applications and desktop tools to be used in conjunction with a
window manager for the X Window System. The gnome-utils package
includes a set of small "desk accessory" utility applications for GNOME.
  • No added dependencies
  • No removed dependencies
gnome-volume-manager-2.15.0-4.el5 - gnome-volume-manager-2.15.0-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    The GNOME Volume Manager
  • Description: Copy to Clipboard Toggle word wrap 
    The GNOME Volume Manager monitors volume-related events and responds with
user-specified policy. The GNOME Volume Manager can automount hot-plugged
drives, automount inserted removable media, autorun programs, automatically
play audio CDs and video DVDs, and automatically import photos from a digital
camera. The GNOME Volume Manager does this entirely in user-space and without
polling.

The GNOME Voume Manager sits at the top end of a larger picture that aims to
integrate the Linux system from the kernel on up through the desktop and its
applications.
  • No added dependencies
  • No removed dependencies
grub-0.97-13 - grub-0.97-13.2
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    GRUB - the Grand Unified Boot Loader.
  • Description: Copy to Clipboard Toggle word wrap 
    GRUB (Grand Unified Boot Loader) is an experimental boot loader
capable of booting into most free operating systems - Linux, FreeBSD,
NetBSD, GNU Mach, and others as well as most commercial operating
systems.
  • No added dependencies
  • No removed dependencies
gthumb-2.7.8-5.el5 - gthumb-2.7.8-8.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X
  • Summary: Copy to Clipboard Toggle word wrap 
    Image viewer, editor, organizer
  • Description: Copy to Clipboard Toggle word wrap 
    gthumb is an application for viewing, editing, and organizing
collections of images.
  • No added dependencies
  • No removed dependencies
gtk2-2.10.4-19.el5 - gtk2-2.10.4-20.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    The GIMP ToolKit (GTK+), a library for creating GUIs for X
  • Description: Copy to Clipboard Toggle word wrap 
    GTK+ is a multi-platform toolkit for creating graphical user
interfaces. Offering a complete set of widgets, GTK+ is suitable for
projects ranging from small one-off tools to complete application
suites.
  • No added dependencies
  • No removed dependencies
gtkhtml3-3.12.0-1.fc6 - gtkhtml3-3.16.3-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    gtkhtml library
  • Description: Copy to Clipboard Toggle word wrap 
    GtkHTML is a lightweight HTML rendering/printing/editing engine. It
was originally based on KHTMLW, but is now being developed
independently of it.
  • Added Dependencies:
    • intltool >= 0.35.0
  • Removed Dependencies:
    • intltool
    • libgnomeprint22-devel >= 2.7.1
    • libgnomeprintui22-devel >= 2.7.1
gzip-1.3.5-9.el5 - gzip-1.3.5-10.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/File
  • Summary: Copy to Clipboard Toggle word wrap 
    The GNU data compression program.
  • Description: Copy to Clipboard Toggle word wrap 
    The gzip package contains the popular GNU gzip data compression
program. Gzipped files have a .gz extension.

Gzip should be installed on your Red Hat Linux system, because it is a
very commonly used data compression program.
  • No added dependencies
  • No removed dependencies
hal-0.5.8.1-25.el5 - hal-0.5.8.1-35.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Hardware Abstraction Layer
  • Description: Copy to Clipboard Toggle word wrap 
    
HAL is daemon for collection and maintaining information from several
sources about the hardware on the system. It provides a live device
list through D-BUS.
  • No added dependencies
  • No removed dependencies
hal-cups-utils-0.6.2-5 - hal-cups-utils-0.6.2-5.2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Halified CUPS utilities
  • Description: Copy to Clipboard Toggle word wrap 
    Halified utilities for CUPS:
- hal_lpadmin
- hal CUPS backend
  • No added dependencies
  • No removed dependencies
hplip-1.6.7-4.1.el5 - hplip-1.6.7-4.1.el5_0.3
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    HP Linux Imaging and Printing Project
  • Description: Copy to Clipboard Toggle word wrap 
    The Hewlett-Packard Linux Imaging and Printing Project provides
drivers for HP printers and multi-function peripherals.
  • Added Dependencies:
    • openssl-devel
  • No removed dependencies
htdig-3.2.0b6-9.el5 - htdig-3.2.0b6-9.0.1.el5_1
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    ht://Dig - Web search engine
  • Description: Copy to Clipboard Toggle word wrap 
    The ht://Dig system is a complete world wide web indexing and searching
system for a small domain or intranet. This system is not meant to replace
the need for powerful internet-wide search systems like Lycos, Infoseek,
Webcrawler and AltaVista. Instead it is meant to cover the search needs for
a single company, campus, or even a particular sub section of a web site. As
opposed to some WAIS-based or web-server based search engines, ht://Dig can
span several web servers at a site. The type of these different web servers
doesn't matter as long as they understand the HTTP 1.0 protocol.
ht://Dig is also used by KDE to search KDE's HTML documentation.

ht://Dig was developed at San Diego State University as a way to search the
various web servers on the campus network.
  • No added dependencies
  • No removed dependencies
htmlview-4.0.0-1.el5 - htmlview-4.0.0-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    Launcher of Preferred Web Browser
  • Description: Copy to Clipboard Toggle word wrap 
    htmlview and launchmail are tools for launching Preferred Applications.
This package exists for compatibility reasons and is likely to be removed
later when equivalent functionality is implemented elsewhere.
  • No added dependencies
  • No removed dependencies
httpd-2.2.3-11.el5 - httpd-2.2.3-11.el5_1.3
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    Apache HTTP Server
  • Description: Copy to Clipboard Toggle word wrap 
    The Apache HTTP Server is a powerful, efficient, and extensible
web server.
  • No added dependencies
  • No removed dependencies
hwbrowser-0.30-1.el5 - hwbrowser-0.30-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    A hardware browser.
  • Description: Copy to Clipboard Toggle word wrap 
    A browser for your current hardware configuration.
  • No added dependencies
  • No removed dependencies
hwdata-0.211-1 - hwdata-0.213.6-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Hardware identification and configuration data
  • Description: Copy to Clipboard Toggle word wrap 
    hwdata contains various hardware identification and configuration data,
such as the pci.ids database and MonitorsDb databases.
  • No added dependencies
  • No removed dependencies
ibutils-1.2-2.el5 - ibutils-1.2-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    OpenIB Mellanox InfiniBand Diagnostic Tools
  • Description: Copy to Clipboard Toggle word wrap 
    ibutils provides IB network and path diagnostics.
  • Added Dependencies:
    • libibumad-devel
  • No removed dependencies
icu-3.6-5.11 - icu-3.6-5.11.1
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    International Components for Unicode
  • Description: Copy to Clipboard Toggle word wrap 
    The International Components for Unicode (ICU) libraries provide
robust and full-featured Unicode services on a wide variety of
platforms. ICU supports the most current version of the Unicode
standard, and they provide support for supplementary Unicode
characters (needed for GB 18030 repertoire support).
As computing environments become more heterogeneous, software
portability becomes more important. ICU lets you produce the same
results across all the various platforms you support, without
sacrificing performance. It offers great flexibility to extend and
customize the supplied services.
  • No added dependencies
  • No removed dependencies
initscripts-8.45.17.EL-1 - initscripts-8.45.19.EL-1
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    The inittab file and the /etc/init.d scripts.
  • Description: Copy to Clipboard Toggle word wrap 
    The initscripts package contains the basic system scripts used to boot
your Red Hat system, change runlevels, and shut the system down
cleanly. Initscripts also contains the scripts that activate and
deactivate most network interfaces.
  • No added dependencies
  • No removed dependencies
iproute-2.6.18-4.el5 - iproute-2.6.18-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Advanced IP routing and network device configuration tools.
  • Description: Copy to Clipboard Toggle word wrap 
    The iproute package contains networking utilities (ip and rtmon, for
example) which are designed to use the advanced networking
capabilities of the Linux 2.4.x and 2.6.x kernel.
  • No added dependencies
  • No removed dependencies
iprutils-2.2.6-1.el5 - iprutils-2.2.8-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Utilities for the IBM Power Linux RAID adapters
  • Description: Copy to Clipboard Toggle word wrap 
    Provides a suite of utilities to manage and configure SCSI devices
supported by the ipr SCSI storage device driver.
  • No added dependencies
  • No removed dependencies
ipsec-tools-0.6.5-8.el5 - ipsec-tools-0.6.5-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Tools for configuring and using IPSEC
  • Description: Copy to Clipboard Toggle word wrap 
    This is the IPsec-Tools package. You need this package in order to
really use the IPsec functionality in the linux-2.5+ kernels. This
package builds:

- setkey, a program to directly manipulate policies and SAs
- racoon, an IKEv1 keying daemon
  • No added dependencies
  • No removed dependencies
iptables-1.3.5-1.2.1 - iptables-1.3.5-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Tools for managing Linux kernel packet filtering capabilities.
  • Description: Copy to Clipboard Toggle word wrap 
    The iptables utility controls the network packet filtering code in the
Linux kernel. If you need to set up firewalls and/or IP masquerading,
you should install this package.
  • No added dependencies
  • No removed dependencies
irqbalance-0.55-6.el5 - irqbalance-0.55-10.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    IRQ balancing daemon.
  • Description: Copy to Clipboard Toggle word wrap 
    irqbalance is a daemon that evenly distributes IRQ load across
multiple CPUs for enhanced performance.
  • No added dependencies
  • No removed dependencies
iscsi-initiator-utils-6.2.0.865-0.8.el5 - iscsi-initiator-utils-6.2.0.868-0.7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    iSCSI daemon and utility programs
  • Description: Copy to Clipboard Toggle word wrap 
    The iscsi package provides the server daemon for the iSCSI protocol,
as well as the utility programs used to manage it. iSCSI is a protocol
for distributed disk access using SCSI commands sent over Internet
Protocol networks.
  • Added Dependencies:
    • bison
    • flex
  • No removed dependencies
isdn4k-utils-3.2-50.1 - isdn4k-utils-3.2-51.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Utilities for configuring an ISDN subsystem.
  • Description: Copy to Clipboard Toggle word wrap 
    The isdn4k-utils package contains a collection of utilities needed for
configuring an ISDN subsystem.
  • No added dependencies
  • No removed dependencies
jakarta-commons-collections-3.1-6jpp.1 - jakarta-commons-collections-3.2-2jpp.3
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries/Java
  • Summary: Copy to Clipboard Toggle word wrap 
    Jakarta Commons Collections Package
  • Description: Copy to Clipboard Toggle word wrap 
    The introduction of the Collections API by Sun in JDK 1.2 has been a
boon to quick and effective Java programming. Ready access to powerful
data structures has accelerated development by reducing the need for
custom container classes around each core object. Most Java2 APIs are
significantly easier to use because of the Collections API.
However, there are certain holes left unfilled by Sun's
implementations, and the Jakarta-Commons Collections Component strives
to fulfill them. Among the features of this package are:
- special-purpose implementations of Lists and Maps for fast access
- adapter classes from Java1-style containers (arrays, enumerations) to
Java2-style collections.
- methods to test or create typical set-theory properties of collections
such as union, intersection, and closure.
  • Added Dependencies:
    • xml-commons-apis >= 1.3
  • No removed dependencies
java-1.4.2-gcj-compat-1.4.2.0-40jpp.112 - java-1.4.2-gcj-compat-1.4.2.0-40jpp.115
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    JPackage runtime scripts for GCJ
  • Description: Copy to Clipboard Toggle word wrap 
    This package installs directory structures, shell scripts and symbolic
links to simulate a JPackage-compatible runtime environment with GCJ.
  • No added dependencies
  • No removed dependencies
kbd-1.12-19.el5 - kbd-1.12-20.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Tools for configuring the console (keyboard, virtual terminals, etc.)
  • Description: Copy to Clipboard Toggle word wrap 
    The kbd package contains tools for managing a Linux
system's console's behavior, including the keyboard, the screen
fonts, the virtual terminals and font files.
  • No added dependencies
  • No removed dependencies
kdeadmin-3.5.4-2.fc6 - kdeadmin-3.5.4-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/Desktops
  • Summary: Copy to Clipboard Toggle word wrap 
    Administrative tools for KDE.
  • Description: Copy to Clipboard Toggle word wrap 
    The kdeadmin package includes administrative tools for the K Desktop
Environment (KDE) including:

kcron - Crontab editor
kdat - Tape backup tool
kuser - Frontend for configuring users and user groups
  • No added dependencies
  • No removed dependencies
kdebase-3.5.4-13.6.el5 - kdebase-3.5.4-18.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/Desktops
  • Summary: Copy to Clipboard Toggle word wrap 
    K Desktop Environment - core files
  • Description: Copy to Clipboard Toggle word wrap 
    Core applications for the K Desktop Environment. Included are: kdm
(replacement for xdm), kwin (window manager), konqueror (filemanager,
web browser, ftp client, ...), konsole (xterm replacement), kpanel
(application starter and desktop pager), kaudio (audio server),
kdehelp (viewer for kde help files, info and man pages), kthememgr
(system for managing alternate theme packages) plus other KDE
components (kcheckpass, kikbd, kscreensaver, kcontrol, kfind,
kfontmanager, kmenuedit).
  • No added dependencies
  • No removed dependencies
kdelibs-3.5.4-13.el5 - kdelibs-3.5.4-16.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    K Desktop Environment - Libraries
  • Description: Copy to Clipboard Toggle word wrap 
    Libraries for the K Desktop Environment:
KDE Libraries included: kdecore (KDE core library), kdeui (user interface),
kfm (file manager), khtmlw (HTML widget), kio (Input/Output, networking),
kspell (spelling checker), jscript (javascript), kab (addressbook),
kimgio (image manipulation).
  • No added dependencies
  • No removed dependencies
kernel-2.6.18-53.el5 - kernel-2.6.18-92.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Kernel
  • Summary: Copy to Clipboard Toggle word wrap 
    The Linux kernel (the core of the Linux operating system)
  • Description: Copy to Clipboard Toggle word wrap 
    The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system. The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.
  • No added dependencies
  • No removed dependencies
kexec-tools-1.101-194.4.el5 - kexec-tools-1.102pre-21.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    The kexec/kdump userspace component.
  • Description: Copy to Clipboard Toggle word wrap 
    kexec-tools provides /sbin/kexec binary that facilitates a new
kernel to boot using the kernel's kexec feature either on a
normal or a panic reboot. This package contains the /sbin/kexec
binary and ancillary utilities that together form the userspace
component of the kernel's kexec feature.
  • No added dependencies
  • No removed dependencies
krb5-1.6.1-17.el5 - krb5-1.6.1-25.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    The Kerberos network authentication system.
  • Description: Copy to Clipboard Toggle word wrap 
    Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network's security by eliminating the insecure
practice of cleartext passwords.
  • No added dependencies
  • No removed dependencies
ksh-20060214-1.4 - ksh-20060214-1.7
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Shells
  • Summary: Copy to Clipboard Toggle word wrap 
    The Original ATT Korn Shell
  • Description: Copy to Clipboard Toggle word wrap 
    KSH-93 is the most recent version of the KornShell by David Korn of
AT&T Bell Laboratories.
KornShell is a shell programming language, which is upward compatible
with "sh" (the Bourne Shell).
  • No added dependencies
  • No removed dependencies
kudzu-1.2.57.1.15-1 - kudzu-1.2.57.1.17-1
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    The Red Hat Linux hardware probing tool.
  • Description: Copy to Clipboard Toggle word wrap 
    Kudzu is a hardware probing tool run at system boot time to determine
what hardware has been added or removed from the system.
  • No added dependencies
  • No removed dependencies
lam-7.1.2-8.fc6 - lam-7.1.2-14.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    The LAM (Local Area Multicomputer) programming environment.
  • Description: Copy to Clipboard Toggle word wrap 
    LAM (Local Area Multicomputer) is an Message-Passing Interface (MPI)
programming environment and development system for heterogeneous
computers on a network. With LAM/MPI, a dedicated cluster or an
existing network computing infrastructure can act as one parallel
computer to solve one problem. LAM/MPI is considered to be "cluster
friendly" because it offers daemon-based process startup/control as
well as fast client-to-client message passing protocols. LAM/MPI can
use TCP/IP and/or shared memory for message passing (different RPMs
are supplied for this—see the main LAM website at
http://www.mpi.nd.edu/lam/ for details).<

LAM features a full implementation of MPI version 1 (with the
exception that LAM does not support cancelling of sends), and much of
version 2. Compliant applications are source code portable between LAM
and any other implementation of MPI. In addition to meeting the
standard, LAM/MPI offers extensive monitoring capabilities to support
debugging. Monitoring happens on two levels: On one level, LAM/MPI has
the hooks to allow a snapshot of a process and message status to be
taken at any time during an application run. The status includes all
aspects of synchronization plus datatype map/signature, communicator
group membership and message contents (see the XMPI application on the
main LAM website). On the second level, the MPI library can produce a
cumulative record of communication, which can be visualized either at
runtime or post-mortem.
  • No added dependencies
  • No removed dependencies
libX11-1.0.3-8.0.1.el5 - libX11-1.0.3-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    X.Org X11 libX11 runtime library
  • Description: Copy to Clipboard Toggle word wrap 
    X.Org X11 libX11 runtime library
  • No added dependencies
  • No removed dependencies
libXfont-1.2.2-1.0.2.el5 - libXfont-1.2.2-1.0.3.el5_1
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    X.Org X11 libXfont runtime library
  • Description: Copy to Clipboard Toggle word wrap 
    X.Org X11 libXfont runtime library
  • No added dependencies
  • No removed dependencies
libao-0.8.6-5 - libao-0.8.6-7
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Cross Platform Audio Output Library.
  • Description: Copy to Clipboard Toggle word wrap 
    Libao is a cross platform audio output library. It currently supports
ESD, OSS, Solaris, and IRIX.
  • No added dependencies
  • No removed dependencies
libchewing-0.3.0-7.el5 - libchewing-0.3.0-8.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Intelligent phonetic input method library for Traditional Chinese
  • Description: Copy to Clipboard Toggle word wrap 
    libchewing is an intelligent phonetic input method library for Chinese.

It provides the core algorithm and logic that can be used by various
input methods. The Chewing input method is a smart bopomofo phonetics
input method that is useful for inputting Mandarin Chinese.
  • No added dependencies
  • No removed dependencies
libdhcp-1.20-2.el5 - libdhcp-1.20-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A library for network interface configuration with DHCP
  • Description: Copy to Clipboard Toggle word wrap 
    libdhcp enables programs to invoke and control the Dynamic Host Configuration
Protocol (DHCP) clients: the Internet Software Consortium (ISC) IPv4 DHCP
client library, libdhcp4client, and the IPv6 DHCPv6 client library,
libdhcp6client, and provides Network Interface Configuration (NIC) services
for network parameter autoconfiguration with DHCP.
  • Added Dependencies:
    • dhcp-devel >= 12:3.0.5-13
    • libdhcp4client-devel >= 12:3.0.5-13
    • libdhcp6client-devel >= 1.0.9-1
  • Removed Dependencies:
    • dhcp-devel
    • libdhcp4client-devel >= 12:3.0.4-17
    • libdhcp6client-devel
liberation-fonts-0.2-2.el5 - liberation-fonts-1.0-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X
  • Summary: Copy to Clipboard Toggle word wrap 
    Fonts to replace commonly used Microsoft Windows Fonts
  • Description: Copy to Clipboard Toggle word wrap 
    The Liberation Fonts are intended to be replacements for the three
most commonly used fonts on Microsoft systems: Times New Roman,
Arial, and Courier New.
  • No added dependencies
  • No removed dependencies
libexif-0.6.13-4.0.2.el5 - libexif-0.6.13-4.0.2.el5_1.1
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Library for extracting extra information from image files
  • Description: Copy to Clipboard Toggle word wrap 
    Most digital cameras produce EXIF files, which are JPEG files with
extra tags that contain information about the image. The EXIF library
allows you to parse an EXIF file and read the data from those tags.
  • No added dependencies
  • No removed dependencies
libgnomeprint22-2.12.1-9.el5 - libgnomeprint22-2.12.1-10.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Printing library for GNOME.
  • Description: Copy to Clipboard Toggle word wrap 
    GNOME (GNU Network Object Model Environment) is a user-friendly set of
applications and desktop tools to be used in conjunction with a window
manager for the X Window System. The gnome-print package contains
libraries and fonts needed by GNOME applications for printing.

You should install the gnome-print package if you intend to use any of
the GNOME applications that can print. If you would like to develop
GNOME applications that can print you will also need to install the
gnome-print devel package.
  • No added dependencies
  • No removed dependencies
libhugetlbfs-1.0.1-1.el5 - libhugetlbfs-1.2-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Library to access the Huge TLB Filesystem
  • Description: Copy to Clipboard Toggle word wrap 
    The libhugetlbfs library interacts with the Linux hugetlbfs to make large pages
available to applications in a transparent manner.
  • No added dependencies
  • No removed dependencies
libica-1.3.7-5.el5 - libica-1.3.7-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A library of functions for accessing ICA hardware crypto on IBM zSeries
  • Description: Copy to Clipboard Toggle word wrap 
    A library of functions for accessing ICA hardware crypto on IBM zSeries
  • Added Dependencies:
    • autoconf
    • automake
    • libtool
  • No removed dependencies
libnl-1.0-0.10.pre5.4 - libnl-1.0-0.10.pre5.5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Convenience library for kernel netlink sockets
  • Description: Copy to Clipboard Toggle word wrap 
    This package contains a convenience library to simplify
using the Linux kernel's netlink sockets interface for
network manipulation
  • No added dependencies
  • No removed dependencies
libpng-1.2.10-7.0.2 - libpng-1.2.10-7.1.el5_0.1
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A library of functions for manipulating PNG image format files
  • Description: Copy to Clipboard Toggle word wrap 
    The libpng package contains a library of functions for creating and
manipulating PNG (Portable Network Graphics) image format files. PNG
is a bit-mapped graphics format similar to the GIF format. PNG was
created to replace the GIF format, since GIF uses a patented data
compression algorithm.

Libpng should be installed if you need to manipulate PNG format image
files.
  • No added dependencies
  • No removed dependencies
libraw1394-1.2.1-1.fc6 - libraw1394-1.3.0-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Library providing low-level IEEE-1394 access
  • Description: Copy to Clipboard Toggle word wrap 
    The libraw1394 library provides direct access to the IEEE-1394 bus through
the Linux 1394 subsystem's raw1394 user space interface.
  • Added Dependencies:
    • autoconf
    • automake
    • libtool
  • No removed dependencies
librtas-1.2.4-3.el5 - librtas-1.3.3-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Libraries to provide access to RTAS calls and RTAS events
  • Description: Copy to Clipboard Toggle word wrap 
    The librtas shared library provides userspace with an interface
through which certain RTAS calls can be made. The library uses
either of the RTAS User Module or the RTAS system call to direct
the kernel in making these calls.

The librtasevent shared library provides users with a set of
definitions and common routines useful in parsing and dumping
the contents of RTAS events.
  • No added dependencies
  • No removed dependencies
libselinux-1.33.4-4.el5 - libselinux-1.33.4-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    SELinux library and simple utilities
  • Description: Copy to Clipboard Toggle word wrap 
    Security-enhanced Linux is a feature of the Linux® kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.

libselinux provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions. Required for any applications that use the SELinux API.
  • No added dependencies
  • No removed dependencies
libuser-0.54.7-2.el5.2 - libuser-0.54.7-2.el5.5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A user and group account administration library.
  • Description: Copy to Clipboard Toggle word wrap 
    The libuser library implements a standardized interface for manipulating
and administering user and group accounts. The library uses pluggable
back-ends to interface to its data sources.

Sample applications modeled after those included with the shadow password
suite are included.
  • No added dependencies
  • No removed dependencies
libvirt-0.2.3-9.el5 - libvirt-0.3.3-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Library providing a simple API virtualization
  • Description: Copy to Clipboard Toggle word wrap 
    Libvirt is a C toolkit to interract with the virtualization capabilities
of recent versions of Linux (and other OSes).
  • Added Dependencies:
    • avahi-devel
    • bridge-utils
    • dnsmasq
    • gnutls-devel
  • Removed Dependencies:
    • /sbin/iptables
    • libsysfs-devel
libxml2-2.6.26-2.1.2 - libxml2-2.6.26-2.1.2.1
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Library providing XML and HTML support
  • Description: Copy to Clipboard Toggle word wrap 
    This library allows to manipulate XML files. It includes support
to read, modify and write XML and HTML files. There is DTDs support
this includes parsing and validation even with complex DtDs, either
at parse time or later once the document has been modified. The output
can be a simple SAX stream or and in-memory DOM like representations.
In this case one can use the built-in XPath and XPointer implementation
to select subnodes or ranges. A flexible Input/Output mechanism is
available, with existing HTTP and FTP modules and combined to an
URI library.
  • No added dependencies
  • No removed dependencies
logrotate-3.7.4-7 - logrotate-3.7.4-8
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Rotates, compresses, removes and mails system log files.
  • Description: Copy to Clipboard Toggle word wrap 
    The logrotate utility is designed to simplify the administration of
log files on a system which generates a lot of log files. Logrotate
allows for the automatic rotation compression, removal and mailing of
log files. Logrotate can be set to handle a log file daily, weekly,
monthly or when the log file gets to a certain size. Normally,
logrotate runs as a daily cron job.

Install the logrotate package if you need a utility to deal with the
log files on your system.
  • No added dependencies
  • No removed dependencies
logwatch-7.3-5 - logwatch-7.3-6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    A log file analysis program
  • Description: Copy to Clipboard Toggle word wrap 
    Logwatch is a customizable, pluggable log-monitoring system. It will go
through your logs for a given period of time and make a report in the areas
that you wish with the detail that you wish. Easy to use - works right out
of the package on many systems.
  • No added dependencies
  • No removed dependencies
ltrace-0.5-6.45svn.fc6 - ltrace-0.5-7.45svn.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Debuggers
  • Summary: Copy to Clipboard Toggle word wrap 
    Tracks runtime library calls from dynamically linked executables.
  • Description: Copy to Clipboard Toggle word wrap 
    Ltrace is a debugging program which runs a specified command until the
command exits. While the command is executing, ltrace intercepts and
records both the dynamic library calls called by the executed process
and the signals received by the executed process. Ltrace can also
intercept and print system calls executed by the process.

You should install ltrace if you need a sysadmin tool for tracking the
execution of processes.
  • No added dependencies
  • No removed dependencies
lvm2-2.02.26-3.el5 - lvm2-2.02.32-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Userland logical volume management tools
  • Description: Copy to Clipboard Toggle word wrap 
    LVM2 includes all of the support for handling read/write operations on
physical volumes (hard disks, RAID-Systems, magneto optical, etc.,
multiple devices (MD), see mdadd(8) or even loop devices, see
losetup(8)), creating volume groups (kind of virtual disks) from one
or more physical volumes and creating one or more logical volumes
(kind of logical partitions) in volume groups.
  • Added Dependencies:
    • device-mapper >= 1.02.24-1
  • Removed Dependencies:
    • device-mapper >= 1.02.20-1
lvm2-cluster-2.02.26-1.el5 - lvm2-cluster-2.02.32-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Cluster extensions for userland logical volume management tools
  • Description: Copy to Clipboard Toggle word wrap 
    Extensions to LVM2 to support clusters.
  • Added Dependencies:
    • device-mapper >= 1.02.24-1
  • Removed Dependencies:
    • device-mapper >= 1.02.20-1
m17n-db-1.3.3-46.el5 - m17n-db-1.3.3-48.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Multilingualization datafiles for m17n-lib
  • Description: Copy to Clipboard Toggle word wrap 
    This package contains multilingualization (m17n) datafiles for m17n-lib
which describe input maps, encoding maps, and OpenType font data
for many languages.
  • No added dependencies
  • No removed dependencies
m2crypto-0.16-6.el5.1 - m2crypto-0.16-6.el5.2
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Support for using OpenSSL in python scripts
  • Description: Copy to Clipboard Toggle word wrap 
    This package allows you to call OpenSSL functions from python scripts.
  • No added dependencies
  • No removed dependencies
mailman-2.1.9-2 - mailman-2.1.9-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    Mailing list manager with built in Web access.
  • Description: Copy to Clipboard Toggle word wrap 
    Mailman is software to help manage email discussion lists, much like
Majordomo and Smartmail. Unlike most similar products, Mailman gives
each mailing list a webpage, and allows users to subscribe,
unsubscribe, etc. over the Web. Even the list manager can administer
his or her list entirely from the Web. Mailman also integrates most
things people want to do with mailing lists, including archiving, mail
<-> news gateways, and so on.

Documentation can be found in: /usr/share/doc/mailman-2.1.9

When the package has finished installing, you will need to perform some
additional installation steps, these are described in:
/usr/share/doc/mailman-2.1.9/INSTALL.REDHAT
  • No added dependencies
  • No removed dependencies
make-3.81-1.1 - make-3.81-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Tools
  • Summary: Copy to Clipboard Toggle word wrap 
    A GNU tool which simplifies the build process for users.
  • Description: Copy to Clipboard Toggle word wrap 
    A GNU tool for controlling the generation of executables and other
non-source files of a program from the program's source files. Make
allows users to build and install packages without any significant
knowledge about the details of the build process. The details about
how the program should be built are provided for make in the program's
makefile.

The GNU make tool should be installed on your system because it is
commonly used to simplify the process of installing programs.
  • No added dependencies
  • No removed dependencies
man-pages-ja-20060815-5 - man-pages-ja-20060815-6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Documentation
  • Summary: Copy to Clipboard Toggle word wrap 
    Japanese man (manual) pages from the Japanese Manual Project
  • Description: Copy to Clipboard Toggle word wrap 
    Japanese Manual pages, translated by JM-Project (Japanese Manual Project).
  • No added dependencies
  • No removed dependencies
mcstrans-0.2.6-1.el5 - mcstrans-0.2.7-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    SELinux Translation Daemon
  • Description: Copy to Clipboard Toggle word wrap 
    Security-enhanced Linux is a feature of the Linux® kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.

mcstrans provides an translation daemon to translate SELinux categories
from internal representations to user defined representation.
  • No added dependencies
  • No removed dependencies
mdadm-2.5.4-3.el5 - mdadm-2.6.4-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    mdadm controls Linux md devices (software RAID arrays)
  • Description: Copy to Clipboard Toggle word wrap 
    mdadm is used to create, manage, and monitor Linux MD (software RAID)
devices. As such, it provides similar functionality to the raidtools
package. However, mdadm is a single program, and it can perform
almost all functions without a configuration file, though a configuration
file can be used to help with some common tasks.
  • No added dependencies
  • No removed dependencies
metacity-2.16.0-8.el5 - metacity-2.16.0-10.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/Desktops
  • Summary: Copy to Clipboard Toggle word wrap 
    Metacity window manager
  • Description: Copy to Clipboard Toggle word wrap 
    
Metacity is a simple window manager that integrates nicely with
GNOME 2.
  • No added dependencies
  • No removed dependencies
microcode_ctl-1.17-1.42.el5 - microcode_ctl-1.17-1.47.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Tool to update x86/x86-64 CPU microcode.
  • Description: Copy to Clipboard Toggle word wrap 
    microcode_ctl - updates the microcode on Intel x86/x86-64 CPU's
  • No added dependencies
  • No removed dependencies
mkinitrd-5.1.19.6-19 - mkinitrd-5.1.19.6-28
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Creates an initial ramdisk image for preloading modules.
  • Description: Copy to Clipboard Toggle word wrap 
    Mkinitrd creates filesystem images for use as initial ramdisk (initrd)
images. These ramdisk images are often used to preload the block
device modules (SCSI or RAID) needed to access the root filesystem.

In other words, generic kernels can be built without drivers for any
SCSI adapters which load the SCSI driver as a module. Since the
kernel needs to read those modules, but in this case it isn't able to
address the SCSI adapter, an initial ramdisk is used. The initial
ramdisk is loaded by the operating system loader (normally LILO) and
is available to the kernel as soon as the ramdisk is loaded. The
ramdisk image loads the proper SCSI adapter and allows the kernel to
mount the root filesystem. The mkinitrd program creates such a
ramdisk using information found in the /etc/modules.conf file.
  • No added dependencies
  • No removed dependencies
module-init-tools-3.3-0.pre3.1.34.el5 - module-init-tools-3.3-0.pre3.1.37.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Kernel
  • Summary: Copy to Clipboard Toggle word wrap 
    Kernel module management utilities.
  • Description: Copy to Clipboard Toggle word wrap 
    The modutils package includes various programs needed for automatic
loading and unloading of modules under 2.6 and later kernels, as well
as other module management programs. Device drivers and filesystems
are two examples of loaded and unloaded modules.
  • No added dependencies
  • No removed dependencies
mozldap-6.0.4-1.el5 - mozldap-6.0.5-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Mozilla LDAP C SDK
  • Description: Copy to Clipboard Toggle word wrap 
    The Mozilla LDAP C SDK is a set of libraries that
allow applications to communicate with LDAP directory
servers. These libraries are derived from the University
of Michigan and Netscape LDAP libraries. They use Mozilla
NSPR and NSS for crypto.
  • No added dependencies
  • No removed dependencies
mysql-5.0.22-2.1.0.1 - mysql-5.0.45-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Databases
  • Summary: Copy to Clipboard Toggle word wrap 
    MySQL client programs and shared libraries.
  • Description: Copy to Clipboard Toggle word wrap 
    MySQL is a multi-user, multi-threaded SQL database server. MySQL is a
client/server implementation consisting of a server daemon (mysqld)
and many different client programs and libraries. The base package
contains the MySQL client programs, the client shared libraries, and
generic MySQL files.
  • Added Dependencies:
    • gawk
  • No removed dependencies
nautilus-2.16.2-6.el5 - nautilus-2.16.2-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/Desktops
  • Summary: Copy to Clipboard Toggle word wrap 
    Nautilus is a file manager for GNOME.
  • Description: Copy to Clipboard Toggle word wrap 
    Nautilus integrates access to files, applications, media,
Internet-based resources and the Web. Nautilus delivers a dynamic and
rich user experience. Nautilus is an free software project developed
under the GNU General Public License and is a core component of the
GNOME desktop project.
  • No added dependencies
  • No removed dependencies
net-snmp-5.3.1-19.el5 - net-snmp-5.3.1-24.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    A collection of SNMP protocol tools and libraries.
  • Description: Copy to Clipboard Toggle word wrap 
    SNMP (Simple Network Management Protocol) is a protocol used for
network management. The NET-SNMP project includes various SNMP tools:
an extensible agent, an SNMP library, tools for requesting or setting
information from SNMP agents, tools for generating and handling SNMP
traps, a version of the netstat command which uses SNMP, and a Tk/Perl
mib browser. This package contains the snmpd and snmptrapd daemons,
documentation, etc.

You will probably also want to install the net-snmp-utils package,
which contains NET-SNMP utilities.

Building option:
—without tcp_wrappers : disable tcp_wrappers support
  • No added dependencies
  • No removed dependencies
net-tools-1.60-73 - net-tools-1.60-78.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Basic networking tools.
  • Description: Copy to Clipboard Toggle word wrap 
    The net-tools package contains basic networking tools, including
ifconfig, netstat, route, and others.
  • No added dependencies
  • No removed dependencies
newt-0.52.2-9 - newt-0.52.2-10.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A development library for text mode user interfaces.
  • Description: Copy to Clipboard Toggle word wrap 
    Newt is a programming library for color text mode, widget based user
interfaces. Newt can be used to add stacked windows, entry widgets,
checkboxes, radio buttons, labels, plain text fields, scrollbars,
etc., to text mode user interfaces. This package also contains the
shared library needed by programs built with newt, as well as a
/usr/bin/dialog replacement called whiptail. Newt is based on the
slang library.
  • No added dependencies
  • No removed dependencies
nfs-utils-1.0.9-24.el5 - nfs-utils-1.0.9-33.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    NFS utilities and supporting clients and daemons for the kernel NFS server.
  • Description: Copy to Clipboard Toggle word wrap 
    The nfs-utils package provides a daemon for the kernel NFS server and
related tools, which provides a much higher level of performance than the
traditional Linux NFS server used by most users.

This package also contains the showmount program. Showmount queries the
mount daemon on a remote host for information about the NFS (Network File
System) server on the remote host. For example, showmount can display the
clients which are mounted on that host.

This package also contains the mount.nfs and umount.nfs program.
  • No added dependencies
  • No removed dependencies
notification-daemon-0.3.5-8.el5 - notification-daemon-0.3.5-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Notification Daemon
  • Description: Copy to Clipboard Toggle word wrap 
    notification-daemon is the server implementation of the freedesktop.org desktop
notification specification.
  • No added dependencies
  • No removed dependencies
nspr-4.6.5-3.el5 - nspr-4.7.0.99.2-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Netscape Portable Runtime
  • Description: Copy to Clipboard Toggle word wrap 
    NSPR provides platform independence for non-GUI operating system
facilities. These facilities include threads, thread synchronization,
normal file and network I/O, interval timing and calendar time, basic
memory management (malloc and free) and shared library linking.
  • No added dependencies
  • No removed dependencies
nss-3.11.7-1.3.el5 - nss-3.11.99.5-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Network Security Services
  • Description: Copy to Clipboard Toggle word wrap 
    Network Security Services (NSS) is a set of libraries designed to
support cross-platform development of security-enabled client and
server applications. Applications built with NSS can support SSL v2
and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509
v3 certificates, and other security standards.
  • Added Dependencies:
    • nspr-devel >= 4.6.99
  • Removed Dependencies:
    • nspr-devel >= 4.6.2
nss_db-2.2-35.1 - nss_db-2.2-35.3
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    An NSS library for the Berkeley DB.
  • Description: Copy to Clipboard Toggle word wrap 
    Nss_db is a set of C library extensions which allow Berkeley Databases
to be used as a primary source of aliases, ethers, groups, hosts,
networks, protocol, users, RPCs, services, and shadow passwords
(instead of or in addition to using flat files or NIS). Install nss_db
if your flat name service files are too large and lookups are slow.
  • No added dependencies
  • No removed dependencies
nss_ldap-253-5.el5 - nss_ldap-253-12.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    NSS library and PAM module for LDAP.
  • Description: Copy to Clipboard Toggle word wrap 
    This package includes two LDAP access clients: nss_ldap and pam_ldap.
Nss_ldap is a set of C library extensions that allow X.500 and LDAP
directory servers to be used as a primary source of aliases, ethers,
groups, hosts, networks, protocol, users, RPCs, services, and shadow
passwords (instead of or in addition to using flat files or NIS).

Pam_ldap is a module for Linux-PAM that supports password changes, V2
clients, Netscape's SSL, ypldapd, Netscape Directory Server password
policies, access authorization, and crypted hashes.
  • Added Dependencies:
    • keyutils-libs-devel
    • libselinux-devel
  • No removed dependencies
ntp-4.2.2p1-7.el5 - ntp-4.2.2p1-8.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    Synchronizes system time using the Network Time Protocol (NTP).
  • Description: Copy to Clipboard Toggle word wrap 
    The Network Time Protocol (NTP) is used to synchronize a computer's
time with another reference time source. The ntp package contains
utilities and daemons that will synchronize your computer's time to
Coordinated Universal Time (UTC) via the NTP protocol and NTP servers.
The ntp package includes ntpdate (a program for retrieving the date
and time from remote machines via a network) and ntpd (a daemon which
continuously adjusts system time).

Install the ntp package if you need tools for keeping your system's
time synchronized via the NTP protocol.
  • Added Dependencies:
    • perl-HTML-Parser
  • No removed dependencies
oddjob-0.27-7 - oddjob-0.27-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    A D-BUS service which runs odd jobs on behalf of client applications
  • Description: Copy to Clipboard Toggle word wrap 
    oddjob is a D-BUS service which performs particular tasks for clients which
connect to it and issue requests using the system-wide message bus.
  • No added dependencies
  • No removed dependencies
openCryptoki-2.2.4-16.el5 - openCryptoki-2.2.4-21.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Productivity/Security
  • Summary: Copy to Clipboard Toggle word wrap 
    Implementation of Cryptoki v2.11 for IBM Crypto Hardware
  • Description: Copy to Clipboard Toggle word wrap 
    The PKCS#11 Version 2.11 api implemented for the IBM Crypto cards.
This package includes support for the IBM 4758 Cryptographic
CoProcessor (with the PKCS#11 firmware loaded) and the IBM eServer
Cryptographic Accelerator (FC 4960 on pSeries)
  • Added Dependencies:
    • trousers-devel
  • No removed dependencies
openais-0.80.3-7.el5 - openais-0.80.3-15.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    The openais Standards-Based Cluster Framework executive and APIs
  • Description: Copy to Clipboard Toggle word wrap 
    This package contains the openais executive, openais service handlers,
default configuration files and init script.
  • No added dependencies
  • No removed dependencies
openhpi-2.8.1-2.el5.7 - openhpi-2.10.2-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    openhpi Hardware Platform Interface (HPI) library and tools
  • Description: Copy to Clipboard Toggle word wrap 
    OpenHPI is an open source project created with the intent of providing an
implementation of the SA Forum's Hardware Platform Interface (HPI). HPI
provides an abstracted interface to managing computer hardware, typically for
chassis and rack based servers. HPI includes resource modeling; access to and
control over sensor, control, watchdog, and inventory data associated with
resources; abstracted System Event Log interfaces; hardware events and alerts;
and a managed hotswap interface.

OpenHPI provides a modular mechanism for adding new hardware and device support
easily. Many plugins exist in the OpenHPI source tree to provide access to
various types of hardware. This includes, but is not limited to, IPMI based
servers, Blade Center, and machines which export data via sysfs.
  • No added dependencies
  • No removed dependencies
openib-1.2-6.el5 - openib-1.3-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    OpenIB Infiniband Driver Stack
  • Description: Copy to Clipboard Toggle word wrap 
    User space initialization scripts for the kernel InfiniBand drivers
  • No added dependencies
  • Removed Dependencies:
    • autoconf
    • automake
    • libsysfs-devel
    • libtool
    • pciutils-devel
    • zlib-devel
openldap-2.3.27-8 - openldap-2.3.27-8.el5_1.3
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    The configuration files, libraries, and documentation for OpenLDAP.
  • Description: Copy to Clipboard Toggle word wrap 
    OpenLDAP is an open source suite of LDAP (Lightweight Directory Access
Protocol) applications and development tools. LDAP is a set of
protocols for accessing directory services (usually phone book style
information, but other information is possible) over the Internet,
similar to the way DNS (Domain Name System) information is propagated
over the Internet. The openldap package contains configuration files,
libraries, and documentation for OpenLDAP.
  • No added dependencies
  • No removed dependencies
openmotif-2.3.0-0.3.el5 - openmotif-2.3.0-0.5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Open Motif runtime libraries and executables.
  • Description: Copy to Clipboard Toggle word wrap 
    This is the Open Motif 2.3.0 runtime environment. It includes the
Motif shared libraries, needed to run applications which are dynamically
linked against Motif, and the Motif Window Manager "mwm".
  • No added dependencies
  • No removed dependencies
openmpi-1.2.3-4.el5 - openmpi-1.2.5-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Open Message Passing Interface
  • Description: Copy to Clipboard Toggle word wrap 
    Open MPI is an open source, freely available implementation of both the
MPI-1 and MPI-2 standards, combining technologies and resources from
several other projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI) in
order to build the best MPI library available. A completely new MPI-2
compliant implementation, Open MPI offers advantages for system and
software vendors, application developers, and computer science
researchers. For more information, see http://www.open-mpi.org/ .
  • No added dependencies
  • No removed dependencies
openssh-4.3p2-24.el5 - openssh-4.3p2-26.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    The OpenSSH implementation of SSH protocol versions 1 and 2
  • Description: Copy to Clipboard Toggle word wrap 
    SSH (Secure SHell) is a program for logging into and executing
commands on a remote machine. SSH is intended to replace rlogin and
rsh, and to provide secure encrypted communications between two
untrusted hosts over an insecure network. X11 connections and
arbitrary TCP/IP ports can also be forwarded over the secure channel.

OpenSSH is OpenBSD's version of the last free version of SSH, bringing
it up to date in terms of security and features, as well as removing
all patented algorithms to separate libraries.

This package includes the core files necessary for both the OpenSSH
client and server. To make this package useful, you should also
install openssh-clients, openssh-server, or both.
  • No added dependencies
  • No removed dependencies
openssl-0.9.8b-8.3.el5_0.2 - openssl-0.9.8b-10.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    The OpenSSL toolkit
  • Description: Copy to Clipboard Toggle word wrap 
    The OpenSSL toolkit provides support for secure communications between
machines. OpenSSL includes a certificate management tool and shared
libraries which provide various cryptographic algorithms and
protocols.
  • No added dependencies
  • No removed dependencies
oprofile-0.9.2-6.el5 - oprofile-0.9.3-16.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/System
  • Summary: Copy to Clipboard Toggle word wrap 
    System wide profiler
  • Description: Copy to Clipboard Toggle word wrap 
    OProfile is a profiling system for systems running Linux. The
profiling runs transparently during the background, and profile data
can be collected at any time. OProfile makes use of the hardware performance
counters provided on Intel P6, and AMD Athlon family processors, and can use
the RTC for profiling on other x86 processor types.

See the HTML documentation for further details.
  • No added dependencies
  • No removed dependencies
pam-0.99.6.2-3.26.el5 - pam-0.99.6.2-3.27.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A security tool which provides authentication for applications
  • Description: Copy to Clipboard Toggle word wrap 
    PAM (Pluggable Authentication Modules) is a system security tool that
allows system administrators to set authentication policy without
having to recompile programs that handle authentication.
  • No added dependencies
  • No removed dependencies
parted-1.8.1-12.el5 - parted-1.8.1-17.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    The GNU disk partition manipulation program
  • Description: Copy to Clipboard Toggle word wrap 
    The GNU Parted program allows you to create, destroy, resize, move,
and copy hard disk partitions. Parted can be used for creating space
for new operating systems, reorganizing disk usage, and copying data
to new hard disks.
  • No added dependencies
  • No removed dependencies
pciutils-2.2.3-4 - pciutils-2.2.3-5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    PCI bus related utilities.
  • Description: Copy to Clipboard Toggle word wrap 
    The pciutils package contains various utilities for inspecting and
setting devices connected to the PCI bus. The utilities provided
require kernel version 2.1.82 or newer (which support the
/proc/bus/pci interface).
  • No added dependencies
  • No removed dependencies
pcre-6.6-1.1 - pcre-6.6-2.el5_1.7
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Perl-compatible regular expression library
  • Description: Copy to Clipboard Toggle word wrap 
    Perl-compatible regular expression library.
PCRE has its own native API, but a set of "wrapper" functions that are based on
the POSIX API are also supplied in the library libpcreposix. Note that this
just provides a POSIX calling interface to PCRE: the regular expressions
themselves still follow Perl syntax and semantics. The header file
for the POSIX-style functions is called pcreposix.h.
  • No added dependencies
  • No removed dependencies
pcsc-lite-1.3.1-7 - pcsc-lite-1.4.4-0.1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    PC/SC Lite smart card framework and applications
  • Description: Copy to Clipboard Toggle word wrap 
    The purpose of PC/SC Lite is to provide a Windows(R) SCard interface
in a very small form factor for communicating to smartcards and
readers. PC/SC Lite uses the same winscard API as used under
Windows(R). This package includes the PC/SC Lite daemon, a resource
manager that coordinates communications with smart card readers and
smart cards that are connected to the system, as well as other command
line tools.
  • No added dependencies
  • No removed dependencies
perl-5.8.8-10 - perl-5.8.8-10.el5_0.2
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    The Perl programming language
  • Description: Copy to Clipboard Toggle word wrap 
    Perl is a high-level programming language with roots in C, sed, awk
and shell scripting. Perl is good at handling processes and files,
and is especially good at handling text. Perl's hallmarks are
practicality and efficiency. While it is used to do a lot of
different things, Perl's most common applications are system
administration utilities and web programming. A large proportion of
the CGI scripts on the web are written in Perl. You need the perl
package installed on your system so that your system can handle Perl
scripts.

Install this package if you want to program in Perl or enable your
system to handle Perl scripts.
  • No added dependencies
  • No removed dependencies
php-5.1.6-15.el5 - php-5.1.6-20.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    The PHP HTML-embedded scripting language. (PHP: Hypertext Preprocessor)
  • Description: Copy to Clipboard Toggle word wrap 
    PHP is an HTML-embedded scripting language. PHP attempts to make it
easy for developers to write dynamically generated webpages. PHP also
offers built-in database integration for several commercial and
non-commercial database management systems, so writing a
database-enabled webpage with PHP is fairly simple. The most common
use of PHP coding is probably as a replacement for CGI scripts.

The php package contains the module which adds support for the PHP
language to Apache HTTP Server.
  • No added dependencies
  • No removed dependencies
php-pear-1.4.9-4 - php-pear-1.4.9-4.el5.1
  • Group: Copy to Clipboard Toggle word wrap 
    System
  • Summary: Copy to Clipboard Toggle word wrap 
    PHP Extension and Application Repository framework
  • Description: Copy to Clipboard Toggle word wrap 
    PEAR is a framework and distribution system for reusable PHP
components. This package contains the basic PEAR components.
  • No added dependencies
  • No removed dependencies
piranha-0.8.4-7.el5 - piranha-0.8.4-9.3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Cluster administation tools
  • Description: Copy to Clipboard Toggle word wrap 
    Various tools to administer and configure the Linux Virtual Server as well as
heartbeating and failover components. The LVS is a dynamically adjusted
kernel routing mechanism that provides load balancing primarily for web
and ftp servers though other services are supported.
  • No added dependencies
  • No removed dependencies
pirut-1.2.10-1.el5 - pirut-1.3.28-13.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Package Installation, Removal and Update Tools
  • Description: Copy to Clipboard Toggle word wrap 
    pirut (pronounced "pirate") provides a set of graphical tools for managing
software.
  • No added dependencies
  • No removed dependencies
pkgconfig-0.21-1.fc6 - pkgconfig-0.21-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Tools
  • Summary: Copy to Clipboard Toggle word wrap 
    A tool for determining compilation options.
  • Description: Copy to Clipboard Toggle word wrap 
    The pkgconfig tool determines compilation options. For each required
library, it reads the configuration file and outputs the necessary
compiler and linker flags.
  • No added dependencies
  • No removed dependencies
pm-utils-0.99.3-6.el5.17 - pm-utils-0.99.3-6.el5.19
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Power management utilities and scripts for Fedora Core
  • Description: Copy to Clipboard Toggle word wrap 
    The pm-utils package contains utilities and scripts for Fedora Core
useful for power management.
  • No added dependencies
  • No removed dependencies
policycoreutils-1.33.12-12.el5 - policycoreutils-1.33.12-14.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    SELinux policy core utilities.
  • Description: Copy to Clipboard Toggle word wrap 
    Security-enhanced Linux is a feature of the Linux® kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux. The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.

policycoreutils contains the policy core utilities that are required
for basic operation of a SELinux system. These utilities include
load_policy to load policies, setfiles to label filesystems, newrole
to switch roles, and run_init to run /etc/init.d scripts in the proper
context.
  • No added dependencies
  • No removed dependencies
poppler-0.5.4-4.1.el5 - poppler-0.5.4-4.4.el5_1
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    PDF rendering library
  • Description: Copy to Clipboard Toggle word wrap 
    Poppler, a PDF rendering library, it's a fork of the xpdf PDF
viewer developed by Derek Noonburg of Glyph and Cog, LLC.
  • No added dependencies
  • No removed dependencies
postgresql-8.1.9-1.el5 - postgresql-8.1.11-1.el5_1.1
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Databases
  • Summary: Copy to Clipboard Toggle word wrap 
    PostgreSQL client programs and libraries.
  • Description: Copy to Clipboard Toggle word wrap 
    PostgreSQL is an advanced Object-Relational database management system
(DBMS) that supports almost all SQL constructs (including
transactions, subselects and user-defined types and functions). The
postgresql package includes the client programs and libraries that
you'll need to access a PostgreSQL DBMS server. These PostgreSQL
client programs are programs that directly manipulate the internal
structure of PostgreSQL databases on a PostgreSQL server. These client
programs can be located on the same machine with the PostgreSQL
server, or may be on a remote machine which accesses a PostgreSQL
server over a network connection. This package contains the docs
in HTML for the whole package, as well as command-line utilities for
managing PostgreSQL databases on a PostgreSQL server.

If you want to manipulate a PostgreSQL database on a remote PostgreSQL
server, you need this package. You also need to install this package
if you're installing the postgresql-server package.
  • No added dependencies
  • No removed dependencies
ppc64-utils-0.11-2 - ppc64-utils-0.11-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Linux/PPC64 specific utilities
  • Description: Copy to Clipboard Toggle word wrap 
    A collection of utilities for Linux on PPC64 platforms.
  • Added Dependencies:
    • db4-devel
    • librtas-devel >= 1.3.3
    • libstdc++-devel
    • libtool
    • sg3_utils-devel
    • zlib-devel
  • Removed Dependencies:
    • librtas-devel
procps-3.2.7-8.1.el5 - procps-3.2.7-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    System and process monitoring utilities.
  • Description: Copy to Clipboard Toggle word wrap 
    The procps package contains a set of system utilities that provide
system information. Procps includes ps, free, skill, pkill, pgrep,
snice, tload, top, uptime, vmstat, w, watch and pdwx. The ps command
displays a snapshot of running processes. The top command provides
a repetitive update of the statuses of running processes. The free
command displays the amounts of free and used memory on your
system. The skill command sends a terminate command (or another
specified signal) to a specified set of processes. The snice
command is used to change the scheduling priority of specified
processes. The tload command prints a graph of the current system
load average to a specified tty. The uptime command displays the
current time, how long the system has been running, how many users
are logged on, and system load averages for the past one, five,
and fifteen minutes. The w command displays a list of the users
who are currently logged on and what they are running. The watch
program watches a running program. The vmstat command displays
virtual memory statistics about processes, memory, paging, block
I/O, traps, and CPU activity. The pwdx command reports the current
working directory of a process or processes.
  • No added dependencies
  • No removed dependencies
psmisc-22.2-5 - psmisc-22.2-6
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Utilities for managing processes on your system.
  • Description: Copy to Clipboard Toggle word wrap 
    The psmisc package contains utilities for managing processes on your
system: pstree, killall and fuser. The pstree command displays a tree
structure of all of the running processes on your system. The killall
command sends a specified signal (SIGTERM if nothing is specified) to
processes identified by name. The fuser command identifies the PIDs
of processes that are using specified files or filesystems.
  • No added dependencies
  • No removed dependencies
pygtk2-2.10.1-8.el5 - pygtk2-2.10.1-12.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    Python bindings for the GTK+ widget set.
  • Description: Copy to Clipboard Toggle word wrap 
    PyGTK is an extension module for python that gives you access to the GTK+
widget set. Just about anything you can write in C with GTK+ you can write
in python with PyGTK (within reason), but with all the benefits of python.
  • No added dependencies
  • No removed dependencies
pykickstart-0.43-1.el5 - pykickstart-0.43.1-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A python library for manipulating kickstart files
  • Description: Copy to Clipboard Toggle word wrap 
    The pykickstart package is a python library for manipulating kickstart
files.
  • No added dependencies
  • No removed dependencies
python-2.4.3-19.el5 - python-2.4.3-21.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    An interpreted, interactive, object-oriented programming language.
  • Description: Copy to Clipboard Toggle word wrap 
    Python is an interpreted, interactive, object-oriented programming
language often compared to Tcl, Perl, Scheme or Java. Python includes
modules, classes, exceptions, very high level dynamic data types and
dynamic typing. Python supports interfaces to many system calls and
libraries, as well as to various windowing systems (X11, Motif, Tk,
Mac and MFC).

Programmers can write new built-in modules for Python in C or C++.
Python can be used as an extension language for applications that need
a programmable interface. This package contains most of the standard
Python modules, as well as modules for interfacing to the Tix widget
set for Tk and RPM.

Note that documentation for Python is provided in the python-docs
package.
  • No added dependencies
  • No removed dependencies
python-virtinst-0.103.0-3.el5 - python-virtinst-0.300.2-8.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Python modules for starting Xen guest installations
  • Description: Copy to Clipboard Toggle word wrap 
    virtinst is a module to help in starting installations of Fedora/Red
Hat Enterprise Linux related distributions inside of virtual machines. It
supports both paravirt guests (for which only FC and RHEL guests are
currently supported) as well as fully virtualized guests. It uses
libvirt (http://www.libvirt.org) for starting things.

Also contained is a simple script virt-install which uses
virtinst in a command line mode.
  • Added Dependencies:
    • gettext
    • libvirt-python
    • libxml2-python
    • python-urlgrabber
  • No removed dependencies
redhat-release-5Server-5.1.0.2 - redhat-release-5Server-5.2.0.4
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Red Hat Enterprise Linux release file
  • Description: Copy to Clipboard Toggle word wrap 
    Red Hat Enterprise Linux release files
  • No added dependencies
  • No removed dependencies
redhat-release-notes-5Server-9 - redhat-release-notes-5Server-12
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Red Hat Enterprise Linux release notes files
  • Description: Copy to Clipboard Toggle word wrap 
    Red Hat Enterprise Linux release notes files.
  • No added dependencies
  • No removed dependencies
redhat-rpm-config-8.0.45-22.el5 - redhat-rpm-config-8.0.45-24.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Red Hat specific rpm configuration files.
  • Description: Copy to Clipboard Toggle word wrap 
    Red Hat specific rpm configuration files.
  • No added dependencies
  • No removed dependencies
rgmanager-2.0.31-1.el5 - rgmanager-2.0.38-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Open Source HA Resource Group Failover for Red Hat Enterprise Linux
  • Description: Copy to Clipboard Toggle word wrap 
    Red Hat Resource Group Manager provides high availability of critical server
applications in the event of planned or unplanned system downtime.
  • Added Dependencies:
    • slang-devel
  • No removed dependencies
rhel-instnum-1.0.7-1.el5 - rhel-instnum-1.0.8-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A library for decoding RHEL installation numbers
  • Description: Copy to Clipboard Toggle word wrap 
    rhel-instnum provides methods for decoding RHEL installation numbers
  • No added dependencies
  • Removed Dependencies:
    • python
rhn-client-tools-0.4.16-1.el5 - rhn-client-tools-0.4.17-8.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Support programs and libraries for Red Hat Network
  • Description: Copy to Clipboard Toggle word wrap 
    Red Hat Network Client Tools provides programs and libraries to allow your
system to receive software updates from Red Hat Network.
  • No added dependencies
  • No removed dependencies
rhpxl-0.41.1-1.el5 - rhpxl-0.41.1-6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Python library for configuring and running X.
  • Description: Copy to Clipboard Toggle word wrap 
    The rhpxl (pronounced 'rapunzel') package contains a Python library for
configuring and running X.
  • No added dependencies
  • No removed dependencies
rpm-4.4.2-47.el5 - rpm-4.4.2-48.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    The RPM package management system.
  • Description: Copy to Clipboard Toggle word wrap 
    The RPM Package Manager (RPM) is a powerful command line driven
package management system capable of installing, uninstalling,
verifying, querying, and updating software packages. Each software
package consists of an archive of files along with information about
the package like its version, a description, etc.
  • No added dependencies
  • No removed dependencies
rsh-0.17-37.el5 - rsh-0.17-38.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    Clients for remote access commands (rsh, rlogin, rcp).
  • Description: Copy to Clipboard Toggle word wrap 
    The rsh package contains a set of programs which allow users to run
commands on remote machines, login to other machines and copy files
between machines (rsh, rlogin and rcp). All three of these commands
use rhosts style authentication. This package contains the clients
needed for all of these services.
The rsh package should be installed to enable remote access to other
machines.
  • No added dependencies
  • No removed dependencies
ruby-1.8.5-5.el5 - ruby-1.8.5-5.el5_1.1
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    An interpreter of object-oriented scripting language
  • Description: Copy to Clipboard Toggle word wrap 
    Ruby is the interpreted scripting language for quick and easy
object-oriented programming. It has many features to process text
files and to do system management tasks (as in Perl). It is simple,
straight-forward, and extensible.
  • No added dependencies
  • No removed dependencies
s390utils-1.5.3-10.el5.14 - s390utils-1.5.3-17.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Linux/390 specific utilities.
  • Description: Copy to Clipboard Toggle word wrap 
    This package contains utilities related to Linux for S/390.
The most important programs contained in this package are:

- The cmstools suite to list, check, copy and cat files from a CMS volume.
- chccwdev, a script to generically change attributes of a ccw device.
- dasdfmt, which is used to low-level format eckd-dasds with
either the classic linux disk layout or the new z/OS
compatible disk layout.
- dasdview, which displays DASD and VTOC information and dumps the content
of a DASD to the console.
- fdasd, which is used to create or modify partitions on
eckd-dasds formatted with the z/OS compatible disk layout.
- osasnmpd, a subagent for net-snmp to access the OSA hardware.
- qetharp to query and purge address data in the OSA and HiperSockets hardware
- qethconf to configure IBM QETH function IPA, VIPA and Proxy ARP.
- src_vipa.sh to start applications using VIPA capabilities
- tunedasd, a tool to adjust tunable parameters on DASD devices
- vmconvert, a tool to convert vm dumps to lkcd compatible dumps.
- vmcp, a tool to send CP commands from a Linux guest to the VM.
- zipl, which is used to make either dasds or tapes bootable
for system IPL or system dump.
- zdump, which is used to retrieve system dumps from either
tapes or dasds.
  • No added dependencies
  • No removed dependencies
salinfo-1.1-3.el5 - salinfo-1.1-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Utilities/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Sal info tool.
  • Description: Copy to Clipboard Toggle word wrap 
    The IA64 Linux kernel has a Software Abstraction Layer (SAL). One of
SAL's tasks is to record machine problems such as CMC (correctable
machine checks), CPE (correctable platform errors), MCA (machine check
architecture) and INIT (cpu initialized after boot). These records are
provided by SAL to user space. salinfo saves and decodes CMC/CPE/MCA
and INIT records.
  • No added dependencies
  • No removed dependencies
samba-3.0.25b-0.el5.4 - samba-3.0.28-0.el5.8
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    The Samba SMB server.
  • Description: Copy to Clipboard Toggle word wrap 
    
Samba is the suite of programs by which a lot of PC-related machines
share files, printers, and other information (such as lists of
available files and printers). The Windows NT, OS/2, and Linux
operating systems support this natively, and add-on packages can
enable the same thing for DOS, Windows, VMS, UNIX of all kinds, MVS,
and more. This package provides an SMB server that can be used to
provide network services to SMB (sometimes called "Lan Manager")
clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols and does NOT
need the NetBEUI (Microsoft Raw NetBIOS frame) protocol.
  • No added dependencies
  • No removed dependencies
sblim-1-29.EL5 - sblim-1-31.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Standards Based Linux Instrumentation for Manageability
  • Description: Copy to Clipboard Toggle word wrap 
    SBLIM stands for Standards Based Linux Instrumentation for Manageability,
and consists of a set of standards based Web Based Enterprise Management
(WBEM) modules that use the Common Information Model (CIM) standard to
gather and provide systems management information, events, and methods
to local or networked consumers via an CIM object services broker using
the CMPI (Common Manageability Programming Interface) standard.
This package provides a set of core providers and development tools
for systems management applications.
  • No added dependencies
  • No removed dependencies
scim-anthy-1.2.0-5.el5 - scim-anthy-1.2.0-6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    SCIM IMEngine for anthy for Japanese input
  • Description: Copy to Clipboard Toggle word wrap 
    Scim-anthy is a SCIM IMEngine module for anthy to support Japanese input.
  • No added dependencies
  • No removed dependencies
scim-chewing-0.3.1-10.el5 - scim-chewing-0.3.1-11.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Chewing Chinese input method for SCIM
  • Description: Copy to Clipboard Toggle word wrap 
    This package provides Chewing Chinese input method for SCIM.
  • No added dependencies
  • No removed dependencies
scim-pinyin-0.5.91-15.el5 - scim-pinyin-0.5.91-16.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Smart Pinyin IMEngine for Smart Common Input Method platform
  • Description: Copy to Clipboard Toggle word wrap 
    Simplified Chinese Smart Pinyin IMEngine for SCIM.
  • No added dependencies
  • No removed dependencies
selinux-policy-2.4.6-104.el5 - selinux-policy-2.4.6-137.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    SELinux policy configuration
  • Description: Copy to Clipboard Toggle word wrap 
    SELinux Reference Policy - modular.
  • No added dependencies
  • No removed dependencies
setroubleshoot-1.8.11-4.el5 - setroubleshoot-2.0.5-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Helps troubleshoot SELinux problems
  • Description: Copy to Clipboard Toggle word wrap 
    setroubleshoot gui. Application that allows you to view setroubleshoot-server
messages.
Provides tools to help diagnose SELinux problems. When AVC messages
are generated an alert can be generated that will give information
about the problem and help track its resolution. Alerts can be configured
to user preference. The same tools can be run on existing log files.
  • Added Dependencies:
    • desktop-file-utils
    • htmlview
  • No removed dependencies
sg3_utils-1.20-2.1 - sg3_utils-1.25-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Utilities/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Utils for Linux's SCSI generic driver devices + raw devices
  • Description: Copy to Clipboard Toggle word wrap 
    Collection of Linux utilities for devices that use the SCSI command set.
Includes utilities to copy data based on "dd" syntax and semantics (called
sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check
mode and log pages (sginfo, sg_modes and sg_logs); spin up and down
disks (sg_start); do self tests (sg_senddiag); and various other functions.
See the README, CHANGELOG and COVERAGE files. Requires the linux kernel 2.4
series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0)
must be used. In the 2.6 series other device names may be used as
well (e.g. /dev/sda).

Warning: Some of these tools access the internals of your system
and the incorrect usage of them may render your system inoperable.
  • No added dependencies
  • No removed dependencies
shadow-utils-4.0.17-12.el5 - shadow-utils-4.0.17-13.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Utilities for managing accounts and shadow password files.
  • Description: Copy to Clipboard Toggle word wrap 
    The shadow-utils package includes the necessary programs for
converting UNIX password files to the shadow password format, plus
programs for managing user and group accounts. The pwconv command
converts passwords to the shadow password format. The pwunconv command
unconverts shadow passwords and generates an npasswd file (a standard
UNIX password file). The pwck command checks the integrity of password
and shadow files. The lastlog command prints out the last login times
for all users. The useradd, userdel, and usermod commands are used for
managing user accounts. The groupadd, groupdel, and groupmod commands
are used for managing group accounts.
  • No added dependencies
  • No removed dependencies
shared-mime-info-0.19-3.el5 - shared-mime-info-0.19-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Shared MIME information database
  • Description: Copy to Clipboard Toggle word wrap 
    This is the freedesktop.org shared MIME info database.

Many programs and desktops use the MIME system to represent the types of
files. Frequently, it is necessary to work out the correct MIME type for
a file. This is generally done by examining the file's name or contents,
and looking up the correct MIME type in a database.
  • No added dependencies
  • No removed dependencies
smartmontools-5.36-3.1.el5 - smartmontools-5.36-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Tools for monitoring SMART capable hard disks
  • Description: Copy to Clipboard Toggle word wrap 
    The smartmontools package contains two utility programs (smartctl
and smartd) to control and monitor storage systems using the Self-
Monitoring, Analysis and Reporting Technology System (SMART) built
into most modern ATA and SCSI hard disks. In many cases, these
utilities will provide advanced warning of disk degradation and
failure.
  • No added dependencies
  • No removed dependencies
sos-1.7-9.1.el5 - sos-1.7-9.2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A set of tools to gather troubleshooting information from a system
  • Description: Copy to Clipboard Toggle word wrap 
    Sos is a set of tools that gathers information about system
hardware and configuration. The information can then be used for
diagnostic purposes and debugging. Sos is commonly used to help
support technicians and developers.
  • No added dependencies
  • No removed dependencies
spamassassin-3.1.9-1.el5 - spamassassin-3.2.4-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    Spam filter for email which can be invoked from mail delivery agents.
  • Description: Copy to Clipboard Toggle word wrap 
    SpamAssassin provides you with a way to reduce if not completely eliminate
Unsolicited Commercial Email (SPAM) from your incoming email. It can
be invoked by a MDA such as sendmail or postfix, or can be called from
a procmail script, .forward file, etc. It uses a genetic-algorithm
evolved scoring system to identify messages which look spammy, then
adds headers to the message so they can be filtered by the user's mail
reading software. This distribution includes the spamd/spamc components
which create a server that considerably speeds processing of mail.

To enable spamassassin, if you are receiving mail locally, simply add
this line to your ~/.procmailrc:
INCLUDERC=/etc/mail/spamassassin/spamassassin-default.rc

To filter spam for all users, add that line to /etc/procmailrc
(creating if necessary).
  • Added Dependencies:
    • perl-HTML-Parser >= 3.43
  • No removed dependencies
speex-1.0.5-4 - speex-1.0.5-4.el5_1.1
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A voice compression format (codec)
  • Description: Copy to Clipboard Toggle word wrap 
    Speex is a patent-free compression format designed especially for
speech. It is specialized for voice communications at low bit-rates in
the 2-45 kbps range. Possible applications include Voice over IP
(VoIP), Internet audio streaming, audio books, and archiving of speech
data (e.g. voice mail).
  • No added dependencies
  • No removed dependencies
squid-2.6.STABLE6-4.el5 - squid-2.6.STABLE6-5.el5_1.3
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    The Squid proxy caching server.
  • Description: Copy to Clipboard Toggle word wrap 
    Squid is a high-performance proxy caching server for Web clients,
supporting FTP, gopher, and HTTP data objects. Unlike traditional
caching software, Squid handles all requests in a single,
non-blocking, I/O-driven process. Squid keeps meta data and especially
hot objects cached in RAM, caches DNS lookups, supports non-blocking
DNS lookups, and implements negative caching of failed requests.

Squid consists of a main server program squid, a Domain Name System
lookup program (dnsserver), a program for retrieving FTP data
(ftpget), and some management and client tools.
  • No added dependencies
  • No removed dependencies
sudo-1.6.8p12-10 - sudo-1.6.8p12-12.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Allows restricted root access for specified users.
  • Description: Copy to Clipboard Toggle word wrap 
    Sudo (superuser do) allows a system administrator to give certain
users (or groups of users) the ability to run some (or all) commands
as root while logging all commands and arguments. Sudo operates on a
per-command basis. It is not a replacement for the shell. Features
include: the ability to restrict what commands a user may run on a
per-host basis, copious logging of each command (providing a clear
audit trail of who did what), a configurable timeout of the sudo
command, and the ability to use the same configuration file (sudoers)
on many different machines.
  • Added Dependencies:
    • audit-libs-devel
    • libcap-devel
  • No removed dependencies
sysklogd-1.4.1-40.el5 - sysklogd-1.4.1-44.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    System logging and kernel message trapping daemons.
  • Description: Copy to Clipboard Toggle word wrap 
    The sysklogd package contains two system utilities (syslogd and klogd)
which provide support for system logging. Syslogd and klogd run as
daemons (background processes) and log system messages to different
places, like sendmail logs, security logs, error logs, etc.
  • No added dependencies
  • No removed dependencies
sysstat-7.0.0-3.el5 - sysstat-7.0.2-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    The sar and iostat system monitoring commands.
  • Description: Copy to Clipboard Toggle word wrap 
    This package provides the sar and iostat commands for Linux. Sar and
iostat enable system monitoring of disk, network, and other IO
activity.
  • No added dependencies
  • No removed dependencies
system-config-cluster-1.0.50-1.3 - system-config-cluster-1.0.52-1.1
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    system-config-cluster is a utility which allows you to manage cluster configuration in a graphical setting.
  • Description: Copy to Clipboard Toggle word wrap 
    system-config-cluster is a utility which allows you to manage cluster configuuration in a graphical setting.
  • No added dependencies
  • No removed dependencies
system-config-date-1.8.12-1.el5 - system-config-date-1.8.12-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A graphical interface for modifying system date and time
  • Description: Copy to Clipboard Toggle word wrap 
    system-config-date is a graphical interface for changing the system date and
time, configuring the system time zone, and setting up the NTP daemon to
synchronize the time of the system with an NTP time server.
  • No added dependencies
  • No removed dependencies
system-config-httpd-1.3.3.1-1.el5 - system-config-httpd-1.3.3.3-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Apache configuration tool
  • Description: Copy to Clipboard Toggle word wrap 
    A RHN configuration tool for apache.
  • Added Dependencies:
    • gettext
  • No removed dependencies
system-config-kdump-1.0.12-1.el5 - system-config-kdump-1.0.14-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A graphical interface for configuring kernel crash dumping
  • Description: Copy to Clipboard Toggle word wrap 
    system-config-kdump is a graphical tool for configuring kernel crash
dumping via kdump and kexec.
  • No added dependencies
  • No removed dependencies
system-config-kickstart-2.6.19.1-1.el5 - system-config-kickstart-2.6.19.6-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A graphical interface for making kickstart files.
  • Description: Copy to Clipboard Toggle word wrap 
    Kickstart Configurator is a graphical tool for creating kickstart files.
  • No added dependencies
  • No removed dependencies
system-config-language-1.1.18-1.el5 - system-config-language-1.1.18-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A graphical interface for modifying the system language
  • Description: Copy to Clipboard Toggle word wrap 
    system-config-language is a graphical user interface that
allows the user to change the default language of the system.
  • No added dependencies
  • No removed dependencies
system-config-lvm-1.0.22-1.0.el5 - system-config-lvm-1.1.3-2.0.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    A utility for graphically configuring Logical Volumes
  • Description: Copy to Clipboard Toggle word wrap 
    system-config-lvm is a utility for graphically configuring Logical Volumes
  • Added Dependencies:
    • intltool
  • No removed dependencies
system-config-network-1.3.99-2.el5 - system-config-network-1.3.99.10-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    The GUI of the NEtwork Adminstration Tool
  • Description: Copy to Clipboard Toggle word wrap 
    This is the GUI of the network configuration tool,
supporting Ethernet, Wireless, TokenRing, ADSL, ISDN and PPP.
  • No added dependencies
  • No removed dependencies
system-config-printer-0.7.32.5-1.el5 - system-config-printer-0.7.32.8-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A printer administration tool
  • Description: Copy to Clipboard Toggle word wrap 
    system-config-printer is a graphical user interface that allows
the user to configure a CUPS print server.
  • No added dependencies
  • No removed dependencies
system-config-securitylevel-1.6.29.1-1.el5 - system-config-securitylevel-1.6.29.1-2.1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A graphical interface for modifying the system security level
  • Description: Copy to Clipboard Toggle word wrap 
    system-config-securitylevel is a graphical user interface for
setting basic firewall rules.
  • No added dependencies
  • No removed dependencies
system-config-users-1.2.51-1.el5 - system-config-users-1.2.51-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    A graphical interface for administering users and groups
  • Description: Copy to Clipboard Toggle word wrap 
    system-config-users is a graphical utility for administrating
users and groups. It depends on the libuser library.
  • No added dependencies
  • No removed dependencies
systemtap-0.5.14-1.el5 - systemtap-0.6.2-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Instrumentation System
  • Description: Copy to Clipboard Toggle word wrap 
    SystemTap is an instrumentation system for systems running Linux 2.6.
Developers can write instrumentation to collect data on the operation
of the system.
  • Added Dependencies:
    • /usr/bin/dvips
    • /usr/bin/latex
    • /usr/bin/ps2pdf
    • crash-devel
    • latex2html
    • libcap-devel
    • zlib-devel
  • Removed Dependencies:
    • dejagnu
    • glib2-devel >= 2.0.0
tcpdump-3.9.4-11.el5 - tcpdump-3.9.4-12.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    A network traffic monitoring tool.
  • Description: Copy to Clipboard Toggle word wrap 
    Tcpdump is a command-line tool for monitoring network traffic.
Tcpdump can capture and display the packet headers on a particular
network interface or on all interfaces. Tcpdump can display all of
the packet headers, or just the ones that match particular criteria.

Install tcpdump if you need a program to monitor network traffic.
  • Added Dependencies:
    • /usr/sbin/sendmail
  • No removed dependencies
telnet-0.17-38.el5 - telnet-0.17-39.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    The client program for the telnet remote login protocol.
  • Description: Copy to Clipboard Toggle word wrap 
    Telnet is a popular protocol for logging into remote systems over the
Internet. The telnet package provides a command line telnet client.
  • No added dependencies
  • No removed dependencies
tetex-3.0-33.1.el5 - tetex-3.0-33.2.el5_1.2
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Publishing
  • Summary: Copy to Clipboard Toggle word wrap 
    The TeX text formatting system.
  • Description: Copy to Clipboard Toggle word wrap 
    TeTeX is an implementation of TeX for Linux or UNIX systems. TeX takes
a text file and a set of formatting commands as input and creates a
typesetter-independent .dvi (DeVice Independent) file as output.
Usually, TeX is used in conjunction with a higher level formatting
package like LaTeX or PlainTeX, since TeX by itself is not very
user-friendly. The output format needn't to be DVI, but also PDF,
when using pdflatex or similar tools.

Install tetex if you want to use the TeX text formatting system. Consider
to install tetex-latex (a higher level formatting package which provides
an easier-to-use interface for TeX). Unless you are an expert at using TeX,
you should also install the tetex-doc package, which includes the
documentation for TeX.
  • No added dependencies
  • No removed dependencies
tk-8.4.13-3.fc6 - tk-8.4.13-5.el5_1.1
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Languages
  • Summary: Copy to Clipboard Toggle word wrap 
    Tk graphical toolkit for the Tcl scripting language
  • Description: Copy to Clipboard Toggle word wrap 
    When paired with the Tcl scripting language, Tk provides a fast and powerful
way to create cross-platform GUI applications.
  • No added dependencies
  • No removed dependencies
tog-pegasus-2.6.1-2.el5 - tog-pegasus-2.7.0-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Systems Management/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    OpenPegasus WBEM Services for Linux
  • Description: Copy to Clipboard Toggle word wrap 
    OpenPegasus WBEM Services for Linux enables management solutions that deliver
increased control of enterprise resources. WBEM is a platform and resource
independent DMTF standard that defines a common information model and
communication protocol for monitoring and controlling resources from diverse
sources.
  • Added Dependencies:
    • net-snmp-devel
  • No removed dependencies
tomcat5-5.5.23-0jpp.3.0.2.el5 - tomcat5-5.5.23-0jpp.7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Networking/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    Apache Servlet/JSP Engine, RI for Servlet 2.4/JSP 2.0 API
  • Description: Copy to Clipboard Toggle word wrap 
    Tomcat is the servlet container that is used in the official Reference
Implementation for the Java Servlet and JavaServer Pages technologies.
The Java Servlet and JavaServer Pages specifications are developed by
Sun under the Java Community Process.

Tomcat is developed in an open and participatory environment and
released under the Apache Software License. Tomcat is intended to be
a collaboration of the best-of-breed developers from around the world.
We invite you to participate in this open development project. To
learn more about getting involved, click here.
  • No added dependencies
  • No removed dependencies
totem-2.16.7-1.el5 - totem-2.16.7-4.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Multimedia
  • Summary: Copy to Clipboard Toggle word wrap 
    Movie player for GNOME 2
  • Description: Copy to Clipboard Toggle word wrap 
    Totem is simple movie player for the Gnome desktop. It features a
simple playlist, a full-screen mode, seek and volume controls, as well as
a pretty complete keyboard navigation.
  • Added Dependencies:
    • gecko-devel-unstable >= 1.9
  • Removed Dependencies:
    • firefox-devel
traceroute-2.0.1-2.el5 - traceroute-2.0.1-3.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    Traces the route taken by packets over an IPv4/IPv6 network
  • Description: Copy to Clipboard Toggle word wrap 
    The traceroute utility displays the route used by IP packets on their
way to a specified network (or Internet) host. Traceroute displays
the IP number and host name (if possible) of the machines along the
route taken by the packets. Traceroute is used as a network debugging
tool. If you're having network connectivity problems, traceroute will
show you where the trouble is coming from along the route.

Install traceroute if you need a tool for diagnosing network connectivity
problems.
  • No added dependencies
  • No removed dependencies
tzdata-2007d-1.el5 - tzdata-2007k-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    Timezone data
  • Description: Copy to Clipboard Toggle word wrap 
    This package contains data files with rules for various timezones around
the world.
  • No added dependencies
  • No removed dependencies
udev-095-14.9.el5 - udev-095-14.16.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A userspace implementation of devfs
  • Description: Copy to Clipboard Toggle word wrap 
    The udev package contains an implementation of devfs in
userspace using sysfs and netlink.
  • No added dependencies
  • No removed dependencies
usermode-1.88-3.el5 - usermode-1.88-3.el5.1
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    Tools for certain user account management tasks.
  • Description: Copy to Clipboard Toggle word wrap 
    The usermode package contains the userhelper program, which can be
used to allow configured programs to be run with superuser privileges
by ordinary users.
  • No added dependencies
  • No removed dependencies
util-linux-2.13-0.45.el5 - util-linux-2.13-0.47.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    A collection of basic system utilities.
  • Description: Copy to Clipboard Toggle word wrap 
    The util-linux package contains a large variety of low-level system
utilities that are necessary for a Linux system to function. Among
others, Util-linux contains the fdisk configuration tool and the login
program.
  • No added dependencies
  • No removed dependencies
virt-manager-0.4.0-3.el5 - virt-manager-0.5.3-8.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Emulators
  • Summary: Copy to Clipboard Toggle word wrap 
    Virtual Machine Manager
  • Description: Copy to Clipboard Toggle word wrap 
    Virtual Machine Manager provides a graphical tool for administering
virtual machines such as Xen. It uses libvirt as the backend management
API.
  • No added dependencies
  • No removed dependencies
vsftpd-2.0.5-10.el5 - vsftpd-2.0.5-12.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Daemons
  • Summary: Copy to Clipboard Toggle word wrap 
    vsftpd - Very Secure Ftp Daemon
  • Description: Copy to Clipboard Toggle word wrap 
    vsftpd is a Very Secure FTP daemon. It was written completely from
scratch.
  • No added dependencies
  • No removed dependencies
wireshark-0.99.6-1.el5 - wireshark-0.99.7-1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    Network traffic analyzer
  • Description: Copy to Clipboard Toggle word wrap 
    Wireshark is a network traffic analyzer for Unix-ish operating systems.

This package lays base for libpcap, a packet capture and filtering
library, contains command-line utilities, contains plugins and
documentation for wireshark. A graphical user interface is packaged
separately to GTK+ package.
  • Added Dependencies:
    • libsmi-devel
  • Removed Dependencies:
    • net-snmp-devel >= 5.3
    • net-snmp-utils >= 5.3
wpa_supplicant-0.4.8-10.1.fc6 - wpa_supplicant-0.4.8-10.2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    WPA/WPA2/IEEE 802.1X Supplicant
  • Description: Copy to Clipboard Toggle word wrap 
    wpa_supplicant is a WPA Supplicant for Linux, BSD and Windows with support
for WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA
component that is used in the client stations. It implements key negotiation
with a WPA Authenticator and it controls the roaming and IEEE 802.11
authentication/association of the wlan driver.
  • No added dependencies
  • No removed dependencies
x3270-3.3.4p7-3.el5.1 - x3270-3.3.4p7-3.el5.4
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Internet
  • Summary: Copy to Clipboard Toggle word wrap 
    An X Window System based IBM 3278/3279 terminal emulator
  • Description: Copy to Clipboard Toggle word wrap 
    The x3270 package contains files needed for emulating the IBM 3278/3279
terminals, commonly used with mainframe applications.

You will also need to install a frontend for x3270. Available frontends
are x3270-x11 (for the X Window System) and x3270-text (for text mode).
  • Added Dependencies:
    • /usr/bin/makeconv
    • libicu-devel
  • No removed dependencies
xen-3.0.3-41.el5 - xen-3.0.3-64.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    Xen is a virtual machine monitor
  • Description: Copy to Clipboard Toggle word wrap 
    This package contains the Xen tools and management daemons needed
to run virtual machines on x86, x86_64, and ia64 systems.
Information on how to use Xen can be found at the Xen project pages.

The Xen system also requires the Xen hypervisor and domain-0
kernel, which can be found in the kernel-xen* package.

Virtualization can be used to run multiple operating systems on one
physical system, for purposes of hardware consolidation, hardware
abstraction, or to test untrusted applications in a sandboxed
environment.
  • No added dependencies
  • No removed dependencies
xorg-x11-drv-ati-6.6.3-3.2.el5 - xorg-x11-drv-ati-6.6.3-3.13.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X Hardware Support
  • Summary: Copy to Clipboard Toggle word wrap 
    Xorg X11 ati video driver
  • Description: Copy to Clipboard Toggle word wrap 
    X.Org X11 ati video driver.
  • Added Dependencies:
    • autoconf
    • automake
    • libtool
    • xorg-x11-server-randr-source >= 1.1.1-48.39.el5
  • No removed dependencies
xorg-x11-drv-i810-1.6.5-9.6.el5 - xorg-x11-drv-i810-1.6.5-9.13.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X Hardware Support
  • Summary: Copy to Clipboard Toggle word wrap 
    Xorg X11 i810 video driver(s)
  • Description: Copy to Clipboard Toggle word wrap 
    X.Org X11 i810 video driver.
  • Added Dependencies:
    • xorg-x11-server-randr-source >= 1.1.1-48.39.el5
  • No removed dependencies
xorg-x11-drv-keyboard-1.1.0-2.1 - xorg-x11-drv-keyboard-1.1.0-3
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X Hardware Support
  • Summary: Copy to Clipboard Toggle word wrap 
    Xorg X11 keyboard input driver
  • Description: Copy to Clipboard Toggle word wrap 
    X.Org X11 keyboard input driver.
  • No added dependencies
  • No removed dependencies
xorg-x11-drv-mga-1.4.2-6.el5 - xorg-x11-drv-mga-1.4.2-7.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X Hardware Support
  • Summary: Copy to Clipboard Toggle word wrap 
    Xorg X11 mga video driver
  • Description: Copy to Clipboard Toggle word wrap 
    X.Org X11 mga video driver.
  • No added dependencies
  • No removed dependencies
xorg-x11-drv-nv-2.1.2-1.el5 - xorg-x11-drv-nv-2.1.6-6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X Hardware Support
  • Summary: Copy to Clipboard Toggle word wrap 
    Xorg X11 nv video driver
  • Description: Copy to Clipboard Toggle word wrap 
    X.Org X11 nv video driver.
  • Added Dependencies:
    • xorg-x11-server-randr-source
  • No removed dependencies
xorg-x11-drv-sis-0.9.1-7 - xorg-x11-drv-sis-0.9.1-7.1.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X Hardware Support
  • Summary: Copy to Clipboard Toggle word wrap 
    Xorg X11 sis video driver
  • Description: Copy to Clipboard Toggle word wrap 
    X.Org X11 sis video driver.
  • No added dependencies
  • No removed dependencies
xorg-x11-server-1.1.1-48.26.el5 - xorg-x11-server-1.1.1-48.41.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X
  • Summary: Copy to Clipboard Toggle word wrap 
    X.Org X11 X server
  • Description: Copy to Clipboard Toggle word wrap 
    X.Org X11 X server
  • No added dependencies
  • No removed dependencies
xorg-x11-xinit-1.0.2-13.el5 - xorg-x11-xinit-1.0.2-15.el5
  • Group: Copy to Clipboard Toggle word wrap 
    User Interface/X
  • Summary: Copy to Clipboard Toggle word wrap 
    X.Org X11 X Window System xinit startup scripts
  • Description: Copy to Clipboard Toggle word wrap 
    X.Org X11 X Window System xinit startup scripts
  • No added dependencies
  • No removed dependencies
xsane-0.991-4.el5 - xsane-0.991-5.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/Multimedia
  • Summary: Copy to Clipboard Toggle word wrap 
    An X Window System front-end for the SANE scanner interface.
  • Description: Copy to Clipboard Toggle word wrap 
    XSane is an X based interface for the SANE (Scanner Access Now Easy)
library, which provides access to scanners, digital cameras, and other
capture devices. XSane is written in GTK+ and provides control for
performing the scan and then manipulating the captured image.
  • No added dependencies
  • No removed dependencies
yelp-2.16.0-15.el5 - yelp-2.16.0-18.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Applications/System
  • Summary: Copy to Clipboard Toggle word wrap 
    A system documentation reader from the Gnome project
  • Description: Copy to Clipboard Toggle word wrap 
    Yelp is the Gnome 2 help/documentation browser. It is designed
to help you browse all the documentation on your system in
one central tool.
  • Added Dependencies:
    • gecko-devel-unstable >= 1.9
  • Removed Dependencies:
    • gecko-devel >= 1.8.0.12
yum-3.0.1-5.el5 - yum-3.2.8-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    RPM installer/updater
  • Description: Copy to Clipboard Toggle word wrap 
    Yum is a utility that can check for and automatically download and
install updated RPM packages. Dependencies are obtained and downloaded
automatically prompting the user as necessary.
  • No added dependencies
  • No removed dependencies
yum-metadata-parser-1.0-8.fc6 - yum-metadata-parser-1.1.2-2.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Libraries
  • Summary: Copy to Clipboard Toggle word wrap 
    A fast metadata parser for yum
  • Description: Copy to Clipboard Toggle word wrap 
    Fast metadata parser for yum implemented in C.
  • No added dependencies
  • No removed dependencies
yum-rhn-plugin-0.5.2-3.el5 - yum-rhn-plugin-0.5.3-6.el5
  • Group: Copy to Clipboard Toggle word wrap 
    System Environment/Base
  • Summary: Copy to Clipboard Toggle word wrap 
    RHN support for yum
  • Description: Copy to Clipboard Toggle word wrap 
    This yum plugin provides support for yum to access a Red Hat Network server for
software updates.
  • No added dependencies
  • No removed dependencies
yum-utils-1.0.4-3.el5 - yum-utils-1.1.10-9.el5
  • Group: Copy to Clipboard Toggle word wrap 
    Development/Tools
  • Summary: Copy to Clipboard Toggle word wrap 
    Utilities based around the yum package manager
  • Description: Copy to Clipboard Toggle word wrap 
    yum-utils is a collection of utilities and examples for the yum package
manager. It includes utilities by different authors that make yum easier and
more powerful to use.
  • No added dependencies
  • No removed dependencies

13. Configuration Changes From Previous Release

Copy to Clipboard Toggle word wrap 
krb5-server-1.6.1-17.el5.i386.rpm: /etc/rc.d/init.d/krb524
---  
+++  
@@ -13,9 +13,6 @@
 # Get config.
 . /etc/sysconfig/network
 
-# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
 # Get config.
 [ -r /etc/sysconfig/krb524 ] && . /etc/sysconfig/krb524
 
@@ -28,9 +25,8 @@
 
 # Shell functions to cut down on unnecessary shell invocations.
 start() {
-  	if [ ! -f /var/kerberos/krb5kdc/principal ] ; then
-	    exit 0
-	fi
+  	[ -f /var/kerberos/krb5kdc/principal ] || exit 6
+	[ -x $krb524d ] || exit 5
 	echo -n $"Starting $prog: "
 	daemon ${krb524d} ${KRB524D_ARGS:--m}
 	RETVAL=$?
@@ -68,7 +64,7 @@
 	;;
   *)
 	echo $"Usage: $0 {start|stop|status|restart|condrestart}"
-	RETVAL=1
+	RETVAL=2
 	;;
 esac
 
lvm2-2.02.26-3.el5.i386.rpm: /etc/rc.d/init.d/lvm2-monitor
---  
+++  
@@ -27,17 +27,11 @@
 VGCHANGE="/usr/sbin/vgchange"
 WARN=1
 
-getvgs() {
-    # TODO workaround, need fix warning messages to always use stderr
-    vgs --noheadings -o name 2> /dev/null | grep -v '^[ \t]*WARNING:' | \
-	grep -v '^[ \t]*Volume Groups with the clustered attribute will be inaccessible.'
-}
-
 start()
 {
 	ret=0
 	# TODO do we want to separate out already active groups only?
-	VGS=`getvgs`
+	VGS=`vgs --noheadings -o name 2> /dev/null`
 	for vg in $VGS
 	do
 	    action "Starting monitoring for VG $vg:" $VGCHANGE --monitor y $vg || ret=$?
@@ -55,7 +49,7 @@
 	   echo "Not stopping monitoring, this is a dangerous operation. Please use force-stop to override."
 	   return 1
 	fi
-	VGS=`getvgs`
+	VGS=`vgs --noheadings -o name 2> /dev/null`
 	for vg in $VGS
 	do
 	    action "Stopping monitoring for VG $vg:" $VGCHANGE --monitor n $vg || ret=$?
dhcp-3.0.5-7.el5.i386.rpm: /etc/rc.d/init.d/dhcpd
---  
+++  
@@ -1,128 +1,140 @@
 #!/bin/sh
 #
-# dhcpd         This shell script takes care of starting and stopping
-#               dhcpd.
+### BEGIN INIT INFO
+# Provides: dhcpd
+# Default-Start:
+# Default-Stop:
+# Should-Start:
+# Required-Start: $network
+# Required-Stop:
+# Short-Description: Start and stop the DHCP server
+# Description: dhcpd provides the Dynamic Host Configuration Protocol (DHCP)
+#              server.
+### END INIT INFO
+#
+# The fields below are left around for legacy tools (will remove later).
 #
 # chkconfig: - 65 35
-# description: dhcpd provide access to Dynamic Host Control Protocol.
+# description: dhcpd provides the Dynamic Host Configuration Protocol (DHCP) \
+#              server
+# processname: dhcpd
+# config: /etc/dhcpd.conf
+# config: /var/lib/dhcpd/dhcpd.leases
+# pidfile: /var/run/dhcpd.pid
 
-# Source function library.
-. /etc/rc.d/init.d/functions
+. /etc/init.d/functions
 
-# Source networking configuration.
-. /etc/sysconfig/network
-. /etc/sysconfig/dhcpd
+RETVAL=0
 
-# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
+prog=dhcpd
+dhcpd=/usr/sbin/dhcpd
+lockfile=/var/lock/subsys/dhcpd
+pidfile=/var/run/dhcpd.pid
+statedir=/var/lib/dhcpd
 
-[ -f /usr/sbin/dhcpd ] || exit 0
+[ -f /etc/sysconfig/dhcpd ] && . /etc/sysconfig/dhcpd
 
-cfOption()
-{ let i=0; 
-  for a in $*; 
-  do ((++i)); 
-     if [ $a = -cf ]; then 
-	 ((++i)); 
-	 eval 'echo $'$i;
-     elif [[ $a = -cf* ]]; then 
-	 echo ${a#-cf}; 
-     fi; 
-  done; 
+# if the user specified a different config file, make sure we reference it
+findConfig() {
+    for arg in $DHCPDARGS ; do
+        if [ "$found" = 1 ]; then
+            [ -f "$arg" ] && echo "$arg"
+            return
+        fi
+        if [ "$arg" = "-cf" ]; then
+            found=1
+            continue
+        fi
+    done
+    echo "/etc/dhcpd.conf"
 }
 
-CF=`cfOption $DHCPDARGS`
-if [ -z "$CF" ]; then
-   CF='/etc/dhcpd.conf';
+conf="$(findConfig "$DHCPDARGS")"
+
+if [ ! -f $statedir/dhcpd.leases ] ; then
+    mkdir -p $statedir
+    touch $statedir/dhcpd.leases
+    [ -x /sbin/restorecon ] && [ -d /selinux ] && /sbin/restorecon $statedir/dhcpd.leases >/dev/null 2>&1
 fi
 
-[ -f "$CF" ] || exit 0
-if [ ! -f /var/lib/dhcpd/dhcpd.leases ] ; then
-   mkdir -p /var/lib/dhcpd
-   touch /var/lib/dhcpd/dhcpd.leases
-   [ -x /sbin/restorecon ] && [ -d /selinux ] && /sbin/restorecon /var/lib/dhcp/dhcpd.leases >/dev/null 2>&1
-fi
-
-RETVAL=0
-prog="dhcpd"
-
-configtest()
-{        
-	/usr/sbin/dhcpd -q -t -cf $CF
-	return $?
+configtest() {
+    [ -x $dhcpd ] || return 5
+    [ -f $conf ] || return 6
+    $dhcpd -q -t -cf $conf
+    RETVAL=$?
+    return $RETVAL
 }
 
 start() {
-	# Start daemons.
-	echo -n $"Starting $prog: "
-	daemon /usr/sbin/dhcpd ${DHCPDARGS} 2>/dev/null
-	RETVAL=$?
-	echo
-	if [ $RETVAL -eq 0 ]; then 
-	    touch /var/lock/subsys/dhcpd
-	    if [ -x /usr/bin/logger ]; then
-		/usr/bin/logger -t dhcpd 'dhcpd startup succeeded'
-	    fi;
-	else
-	    if [ -x /usr/bin/logger ]; then
-		/usr/bin/logger -t dhcpd 'dhcpd startup failed'
-	    fi;
-        fi
-	return $RETVAL
+    [ -x $dhcpd ] || return 5
+    [ -f $conf ] || return 6
+
+    pidofproc $prog >/dev/null 2>&1
+    RETVAL=$?
+    [ $RETVAL -eq 0 ] && return $RETVAL
+
+    echo -n $"Starting $prog: "
+    daemon $dhcpd $DHCPDARGS 2>/dev/null
+    RETVAL=$?
+    echo
+    [ $RETVAL = 0 ] && touch $lockfile
+    return $RETVAL
 }
 
 stop() {
-	# Stop daemons.
-	echo -n $"Shutting down $prog: "
-	killproc dhcpd
-	RETVAL=$?
-	echo
-	if [ $RETVAL -eq 0 ]; then
-           rm -f /var/lock/subsys/dhcpd
-	   if [ -x /usr/bin/logger ]; then
-		/usr/bin/logger -t dhcpd 'dhcpd shutdown succeeded'
-	   fi;
-	else
-	   if [ -x /usr/bin/logger ]; then
-		/usr/bin/logger -t dhcpd 'dhcpd shutdown failed'
-	   fi;
-	fi
-	return $RETVAL
+    pidofproc $prog >/dev/null 2>&1
+    if [ $? -ne 0 ]; then
+        RETVAL=7
+        return $RETVAL
+    fi
+
+    echo -n $"Shutting down $prog: "
+    killproc $prog
+    RETVAL=$?
+    [ $RETVAL = 0 ] && rm -f $lockfile
+    echo
+    return $RETVAL
 }
 
-# See how we were called.
+if [ $# -gt 1 ]; then
+    RETVAL=2
+    exit $RETVAL
+fi
+
 case "$1" in
-  start)
-	start
-	;;
-  stop)
-	stop
-	;;
-  restart|reload)
-	configtest || exit $?
-	stop
-	start
-	RETVAL=$?
-	;;
-  condrestart)
-	if [ -f /var/lock/subsys/dhcpd ]; then
-	    stop
-	    start
-	    RETVAL=$?
-	fi
-	;;
-  configtest|check|testconfig|test)
-	configtest
-	RETVAL=$?
-	;;
-  status)
-	status dhcpd
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|condrestart|configtest|status}"
-	exit 1
+    start)
+        start
+        RETVAL=$?
+        ;;
+    stop)
+        stop
+        RETVAL=$?
+        ;;
+    restart|force-reload)
+        stop ; start
+        RETVAL=$?
+        ;;
+    try-restart|reload)
+        RETVAL=3
+        ;;
+    condrestart)
+        if [ -f $lockfile ]; then
+            stop ; start
+            RETVAL=$?
+        fi
+        ;;
+    configtest)
+        configtest
+        RETVAL=$?
+        ;;
+    status)
+        status $dhcpd
+        RETVAL=$?
+        ;;
+    *)
+        echo $"Usage: $0 {start|stop|restart|condrestart|configtest|status}"
+        RETVAL=3
+        ;;
 esac
 
 exit $RETVAL
-
bind-9.3.3-10.el5.i386.rpm: /etc/rc.d/init.d/named
---  
+++  
@@ -14,10 +14,9 @@
 # Source networking configuration.
 [ -r /etc/sysconfig/network ] && . /etc/sysconfig/network
 
-# Check that networking is up.
-[ "${NETWORKING}" = "no" ] && exit 1
-
 [ -r /etc/sysconfig/named ] && . /etc/sysconfig/named
+
+export KRB5_KTNAME=${KEYTAB_FILE:-/etc/named.keytab}
 
 # Don't kill named during clean-up
 NAMED_SHUTDOWN_TIMEOUT=${NAMED_SHUTDOWN_TIMEOUT:-100}
@@ -36,8 +35,6 @@
     named='named_sdb';
 fi;
 prog=$named
-
-[ -x /usr/sbin/$named ] || exit 1
 
 nmdcOption()
 { let i=0; 
@@ -54,18 +51,6 @@
 
 named_c_option=`nmdcOption $OPTIONS`;
 named_conf=${named_c_option:-/etc/named.conf};
-
-if [ ! -r ${ROOTDIR}${named_conf} ] ; then
-   if [ -z "$named_c_option" ] && [ -r ${ROOTDIR}/etc/named.caching-nameserver.conf ]; then
-       named_conf='/etc/named.caching-nameserver.conf';
-       OPTIONS="$OPTIONS -c ${named_conf}";
-   else
-       echo Locating $ROOTDIR/${named_conf} failed:
-       failure
-       echo;
-       exit 1;
-   fi;
-fi;
 
 dbusEnabled=0;
 for a in $OPTIONS; do
@@ -88,6 +73,21 @@
 fi
 
 start() {
+
+	[ -x /usr/sbin/$named ] || exit 5
+
+	if [ ! -r ${ROOTDIR}${named_conf} ] ; then
+	   if [ -z "$named_c_option" ] && [ -r ${ROOTDIR}/etc/named.caching-nameserver.conf ]; then
+	       named_conf='/etc/named.caching-nameserver.conf';
+	       OPTIONS="$OPTIONS -c ${named_conf}";
+	   else
+	       echo Locating $ROOTDIR/${named_conf} failed:
+	       failure
+	       echo;
+	       exit 6;
+	   fi;
+	fi;
+
         # Start daemons.
         echo -n $"Starting $named: "
 	if [ -n "`/sbin/pidof -o %PPID $named`" ]; then
@@ -185,7 +185,7 @@
 	   if [ -x /usr/bin/logger ]; then
 	       echo "$named_err" | /usr/bin/logger -pdaemon.error -tnamed 
            fi;
-           return $RETVAL;
+           return 7;
         fi;
  	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/named 
         echo
@@ -196,23 +196,19 @@
         echo -n $"Stopping $named: "
 	/usr/sbin/rndc stop >/dev/null 2>&1 
 	RETVAL=$?
-	if [ $RETVAL -eq 0 ]; then
-            timeout=0
-            while : ; do
-		if /sbin/pidof -o %PPID $named >/dev/null; then
-         	   if [ $timeout -ge $NAMED_SHUTDOWN_TIMEOUT ]; then
-		   	killproc $named -TERM >/dev/null 2>&1
-	           	RETVAL=$?
+	[ "$RETVAL" -eq 0 ] || killproc "$named" -TERM >/dev/null 2>&1
+
+	timeout=0
+	RETVAL=0
+	while /sbin/pidof -o %PPID "$named" >/dev/null; do
+		if [ $timeout -ge $NAMED_SHUTDOWN_TIMEOUT ]; then
+			RETVAL=1
 			break
-        	   else
+		else
 			sleep 2 && echo -n "."
 			timeout=$((timeout+2))
-		   fi;
-		else
-		   break
-                fi;
-            done
-	fi;
+		fi;
+	done
 	if [ $RETVAL -eq 0 ]; then
 	    rm -f /var/lock/subsys/named
 	    rm -f /var/run/named.pid
@@ -238,6 +234,7 @@
 }
 rhstatus() {
 	/usr/sbin/rndc status
+	status /usr/sbin/$named
 	return $?
 }	
 restart() {
@@ -292,7 +289,7 @@
 		restart
 		;;
 	condrestart)
-		if [ -e /var/lock/subsys/named ]; then restart; fi
+		[ -e /var/lock/subsys/named ] && restart;
 		;;
 	reload)
 		reload
@@ -304,8 +301,8 @@
 	        checkconfig
 		;;
 	*)
-        	echo $"Usage: $0 {start|stop|status|restart|condrestart|reload|probe}"
-		exit 1
+        	echo $"Usage: $0 {start|stop|status|restart|condrestart|reload|configtest|probe}"
+		exit 2
 esac
 
 exit $?
krb5-server-1.6.1-17.el5.i386.rpm: /etc/rc.d/init.d/kprop
---  
+++  
@@ -12,9 +12,6 @@
 # Get config.
 . /etc/sysconfig/network
 
-# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
 # Source function library.
 . /etc/init.d/functions
 
@@ -24,9 +21,8 @@
 
 # Sheel functions to cut down on useless shell instances.
 start() {
-  	if [ ! -f /var/kerberos/krb5kdc/kpropd.acl ] ; then
-	    exit 0
-	fi
+  	[ -f /var/kerberos/krb5kdc/kpropd.acl ] || exit 6
+	[ -x $kpropd ] || exit 5
 	echo -n $"Starting $prog: "
 	daemon ${kpropd} -S
 	RETVAL=$?
@@ -65,7 +61,7 @@
 	;;
   *)
 	echo $"Usage: $0 {start|stop|status|restart|condrestart}"
-	RETVAL=1
+	RETVAL=2
 	;;
 esac
 
initscripts-8.45.17.EL-1.i386.rpm: /etc/sysconfig/network-scripts/ifup-ipsec
---  
+++  
@@ -102,6 +102,7 @@
     [ -n "$KEY_ESP_IN" ] && SPD_ESP_IN=yes
     [ -n "$KEY_ESP_OUT" ] && SPD_ESP_OUT=yes
 else
+    [ -z "$IKE_DHGROUP" ] && IKE_DHGROUP=2
     [ -z "$AH_PROTO" ] && AH_PROTO=sha1
     [ -z "$ESP_PROTO" ] && ESP_PROTO=3des
 
@@ -179,7 +180,7 @@
 	        encryption_algorithm $ESP_PROTO;
 		hash_algorithm $AH_PROTO;
 		authentication_method pre_shared_key;
-		dh_group 2 ;
+		dh_group $IKE_DHGROUP;
 	}
 }
 EOF
@@ -201,7 +202,7 @@
 		encryption_algorithm $ESP_PROTO;
 		hash_algorithm $AH_PROTO;
 		authentication_method rsasig;
-		dh_group 2;
+		dh_group $IKE_DHGROUP;
 	}
 }
 EOF
@@ -213,7 +214,7 @@
 	        encryption_algorithm $ESP_PROTO;
 		hash_algorithm $AH_PROTO;
 		authentication_method gssapi_krb;
-		dh_group 2 ;
+		dh_group $IKE_DHGROUP;
 	}
 }
 EOF
krb5-server-1.6.1-17.el5.i386.rpm: /etc/rc.d/init.d/kadmin
---  
+++  
@@ -14,9 +14,6 @@
 # Get config.
 . /etc/sysconfig/network
 
-# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
 # Get config.
 [ -r /etc/sysconfig/kadmin ] && . /etc/sysconfig/kadmin
 
@@ -32,15 +29,16 @@
   	if [ ! -f /var/kerberos/krb5kdc/principal ] ; then
 	    # Make an educated guess—if they're using kldap somewhere,
 	    # then we don't know for sure that this is an error.
-  	    if [ ! grep -q 'db_library.*=.*kldap' /etc/krb5.conf ] ; then
+  	    if ! grep -q 'db_library.*=.*kldap' /etc/krb5.conf ; then
 	        echo $"Error. Default principal database does not exist."
+	        exit 1
 	    fi
-	    exit 0
 	fi
   	if [ -f /var/kerberos/krb5kdc/kpropd.acl ] ; then
 	    echo $"Error. This appears to be a slave server, found kpropd.acl"
-	    exit 0
+	    exit 6
 	else
+	[ -x $kadmind ] || exit 5
   	    if [ ! -f /var/kerberos/krb5kdc/kadm5.keytab ] ; then
 		echo -n $"Extracting kadm5 Service Keys: "
 		# This should always work.
@@ -97,7 +95,7 @@
 	;;
   *)
 	echo $"Usage: $0 {start|stop|status|condrestart|reload|restart}"
-	RETVAL=1
+	RETVAL=2
 	;;
 esac
 
nfs-utils-1.0.9-24.el5.i386.rpm: /etc/rc.d/init.d/nfs
---  
+++  
@@ -14,41 +14,38 @@
 . /etc/rc.d/init.d/functions
 
 # Source networking configuration.
-if [ ! -f /etc/sysconfig/network ]; then
-    exit 6
-fi
-
-. /etc/sysconfig/network
-
-# Check that networking is up.
-[ "${NETWORKING}" = "no" ] && exit 6
-
-[ -x /usr/sbin/rpc.nfsd ] || exit 5
-[ -x /usr/sbin/rpc.mountd ] || exit 5
-[ -x /usr/sbin/exportfs ] || exit 5
-
-# Don't fail if /etc/exports doesn't exist; create a bare-bones version and continue.
-[ -r /etc/exports ] || \
-    { touch /etc/exports && chmod u+rw,g+r,o+r /etc/exports ; } || \
-    { echo "/etc/exports does not exist" ; exit 0 ; }
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 # Check for and source configuration file otherwise set defaults
 [ -f /etc/sysconfig/nfs ] && . /etc/sysconfig/nfs
-
-[ -z "$MOUNTD_NFS_V2" ] && MOUNTD_NFS_V2=default
-[ -z "$MOUNTD_NFS_V3" ] && MOUNTD_NFS_V3=default
-
-# Number of servers to be started by default
-[ -z "$RPCNFSDCOUNT" ] && RPCNFSDCOUNT=8
-
-# Remote quota server
-[ -z "$RQUOTAD" ] && RQUOTAD=`type -path rpc.rquotad`
 
 RETVAL=0
 
 # See how we were called.
 case "$1" in
   start)
+
+	# Check that networking is up.
+	[ "${NETWORKING}" = "no" ] && exit 6
+
+	[ -x /usr/sbin/rpc.nfsd ] || exit 5
+	[ -x /usr/sbin/rpc.mountd ] || exit 5
+	[ -x /usr/sbin/exportfs ] || exit 5
+
+	# Don't fail if /etc/exports doesn't exist; create a bare-bones 
+	# version and continue.
+	[ -r /etc/exports ] || \
+    	{ touch /etc/exports && chmod u+rw,g+r,o+r /etc/exports ; } || \
+    	{ echo "/etc/exports does not exist" ; exit 0 ; }
+	[ -z "$MOUNTD_NFS_V2" ] && MOUNTD_NFS_V2=default
+	[ -z "$MOUNTD_NFS_V3" ] && MOUNTD_NFS_V3=default
+
+	# Number of servers to be started by default
+	[ -z "$RPCNFSDCOUNT" ] && RPCNFSDCOUNT=8
+
+	# Remote quota server
+	[ -z "$RQUOTAD" ] && RQUOTAD=`type -path rpc.rquotad`
+
 	# Start daemons.
 	[ -x /usr/sbin/rpc.svcgssd ] && /sbin/service rpcsvcgssd start
 
@@ -98,6 +95,7 @@
 	daemon rpc.mountd $RPCMOUNTDOPTS
 	RETVAL=$?
 	echo
+	[ $RETVAL -ne 0 ] && exit $RETVAL
 	touch /var/lock/subsys/nfs
 
 	# Let rpc.idmapd know that rpc.mountd just started
@@ -117,13 +115,6 @@
 		killproc rpc.rquotad
 		RETVAL=$?
 		echo
-	fi
-	# Reset the lockd ports if they were set
-	if [ -n "$LOCKD_TCPPORT" ]; then
-	    /sbin/sysctl -w fs.nfs.nlm_tcpport=0 >/dev/null 2>&1
-	fi
-	if [ -n "$LOCKD_UDPPORT" ]; then
-	    /sbin/sysctl -w fs.nfs.nlm_udpport=0 >/dev/null 2>&1
 	fi
 	# Do it the last so that clients can still access the server
 	# when the server is running.
gdm-2.16.0-31.0.1.el5.i386.rpm: /etc/gdm/PreSession/Default
---  
+++  
@@ -68,4 +68,17 @@
 	"$XSETROOT" -cursor_name left_ptr -solid "$BACKCOLOR"
 fi
 
+SESSREG=`gdmwhich sessreg`
+if [ "x$SESSREG" != "x" ] ; then
+	# some output for easy debugging
+	echo "$0: Registering your session with utmp"
+	echo "$0: running: $SESSREG -a -u /var/run/utmp -x \"$X_SERVERS\" -h \"$REMOTE_HOST\" -l \"$DISPLAY\" \"$USER\""
+
+	exec "$SESSREG" -a -u /var/run/utmp -x "$X_SERVERS" -h "$REMOTE_HOST" -l "$DISPLAY" "$USER"
+	# this is not reached
+fi
+
+# some output for easy debugging
+echo "$0: could not find the sessreg utility, cannot update wtmp and utmp"
+
 exit 0
kexec-tools-1.101-194.4.el5.i386.rpm: /etc/rc.d/init.d/kdump
---  
+++  
@@ -24,6 +24,7 @@
 BOOTDIR="/boot"
 
 KDUMP_KERNELVER=""
+KDUMP_INITRDEXT=""
 KDUMP_COMMANDLINE=""
 KEXEC_ARGS=""
 KDUMP_CONFIG_FILE="/etc/kdump.conf"
@@ -43,7 +44,7 @@
 	coredir="/var/crash/`date +"%Y-%m-%d-%H:%M"`"
 
 	mkdir -p $coredir
-	cp /proc/vmcore $coredir/vmcore-incomplete
+	cp --sparse=always /proc/vmcore $coredir/vmcore-incomplete
 	exitcode=$?
 	if [ $exitcode == 0 ]; then
 		mv $coredir/vmcore-incomplete $coredir/vmcore
@@ -83,7 +84,7 @@
 	fi
 
 	kdump_kernel="${KDUMP_BOOTDIR}/${KDUMP_IMG}-${kdump_kver}${KDUMP_IMG_EXT}"
-	kdump_initrd="${KDUMP_BOOTDIR}/initrd-${kdump_kver}kdump.img"
+	kdump_initrd="${KDUMP_BOOTDIR}/initrd-${kdump_kver}${KDUMP_INITRDEXT}kdump.img"
 
 	if [ ! -f $kdump_kernel ]; then
 		echo -n "No kdump kernel image found."; warning; echo
@@ -186,6 +187,7 @@
 		KDUMP_COMMANDLINE=`cat /proc/cmdline`
 	fi
 
+	ARCH=`uname -m`
 	if [ "$ARCH" == "ppc64" ]
 	then
 		MEM_RESERVED=`grep "crashkernel=[0-9]\+[MmKkGg]@[0-9]\+[MmGgKk]" /proc/cmdline`
initscripts-8.45.17.EL-1.i386.rpm: /etc/rc.d/init.d/network
---  
+++  
@@ -174,7 +174,7 @@
         rootfs=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $3; }}' /etc/mtab)
         rootopts=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $4; }}' /etc/mtab)
 	
-	if [[ "$rootfs" =~ "^nfs" ]] || [[ "$rootopts" =~ "_netdev" ]] ; then
+	if [[ "$rootfs" =~ "^nfs" ]] || [[ "$rootopts" =~ "_netdev|_rnetdev" ]] ; then
 		exit 1
 	fi
   
nfs-utils-1.0.9-24.el5.i386.rpm: /etc/rc.d/init.d/rpcidmapd
---  
+++  
@@ -12,15 +12,7 @@
 . /etc/init.d/functions
 
 # Source networking configuration.
-if [ ! -f /etc/sysconfig/network ]; then
-    exit 6
-fi
-. /etc/sysconfig/network
-
-# Check that networking is up.
-[ "${NETWORKING}" = "no" ] && exit 6
-
-[ ! -x /usr/sbin/rpc.idmapd ] && exit 5
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 # Check for and source configuration file otherwise set defaults
 [ -f /etc/sysconfig/nfs ] && . /etc/sysconfig/nfs
@@ -31,6 +23,11 @@
 
 case "$1" in
   start|condstart)
+	# Check that networking is up.
+	[ "${NETWORKING}" = "no" ] && exit 6
+
+	[ ! -x /usr/sbin/rpc.idmapd ] && exit 5
+
 	# Make sure the daemon is not already running.
 	[ "$1" = "condstart" -a -n "`pidofproc $prog`" ] && {
 		killproc $prog "-SIGHUP" > /dev/null
NetworkManager-gnome-0.6.4-6.el5.i386.rpm: /etc/dbus-1/system.d/nm-applet.conf
---  
+++  
@@ -20,5 +20,7 @@
 		<deny send_destination="org.freedesktop.NetworkManagerInfo"/>
 		<deny send_interface="org.freedesktop.NetworkManagerInfo"/>
 	</policy>
+
+	<limit name="max_replies_per_connection">512</limit>
 </busconfig>
 
sysklogd-1.4.1-40.el5.i386.rpm: /etc/logrotate.d/syslog
---  
+++  
@@ -2,5 +2,6 @@
     sharedscripts
     postrotate
 	/bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true
+	/bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true
     endscript
 }
nfs-utils-1.0.9-24.el5.i386.rpm: /etc/rc.d/init.d/rpcgssd
---  
+++  
@@ -12,23 +12,13 @@
 . /etc/init.d/functions
 
 # Source networking configuration.
-if [ ! -f /etc/sysconfig/network ]; then
-    exit 6
-fi
-. /etc/sysconfig/network
-
-# Check that networking is up.
-[ "${NETWORKING}" = "no" ] && exit 6
-
-[ ! -x /usr/sbin/rpc.gssd ] && exit 5
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 # Check for and source configuration file otherwise set defaults
 [ -f /etc/sysconfig/nfs ] && . /etc/sysconfig/nfs
+
+# See if we are configured to start 
 [ "${SECURE_NFS}" != "yes" ] && exit 6
-
-# List of kernel modules to load
-[ -z "${SECURE_NFS_MODS}" ] && SECURE_NFS_MODS="des rpcsec_gss_krb5"
-
 
 # Try to use machine credentials by default
 RETVAL=0
@@ -37,6 +27,13 @@
 
 case "$1" in
   start|condstart)
+	# Check that networking is up.
+	[ "${NETWORKING}" = "no" ] && exit 6
+	[ ! -x /usr/sbin/rpc.gssd ] && exit 5
+
+	# List of kernel modules to load
+	[ -z "${SECURE_NFS_MODS}" ] && SECURE_NFS_MODS="des rpcsec_gss_krb5"
+
 	# Make sure the daemon is not already running.
 	if status $prog > /dev/null ; then
 		exit 0
krb5-server-1.6.1-17.el5.i386.rpm: /etc/rc.d/init.d/krb5kdc
---  
+++  
@@ -13,9 +13,6 @@
 # Get config.
 . /etc/sysconfig/network
 
-# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
 # Get config.
 [ -r /etc/sysconfig/krb5kdc ] && . /etc/sysconfig/krb5kdc
 
@@ -28,6 +25,7 @@
 
 # Sheel functions to cut down on useless shell instances.
 start() {
+	[ -x $krb5kdc ] || exit 5
 	echo -n $"Starting $prog: "
 	daemon ${krb5kdc} ${KRB5REALM:+-r ${KRB5REALM}} $KRB5KDC_ARGS
 	RETVAL=$?
@@ -75,7 +73,7 @@
 	;;
   *)
 	echo $"Usage: $0 {start|stop|status|reload|restart|condrestart}"
-	RETVAL=1
+	RETVAL=2
 	;;
 esac
 
nfs-utils-1.0.9-24.el5.i386.rpm: /etc/rc.d/init.d/rpcsvcgssd
---  
+++  
@@ -12,22 +12,13 @@
 . /etc/init.d/functions
 
 # Source networking configuration.
-if [ ! -f /etc/sysconfig/network ]; then
-    exit 6
-fi
-. /etc/sysconfig/network
-
-# Check that networking is up.
-[ "${NETWORKING}" = "no" ] && exit 6
-
-[ ! -x /usr/sbin/rpc.svcgssd ] && exit 5
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 # Check for and source configuration file otherwise set defaults
 [ -f /etc/sysconfig/nfs ] && . /etc/sysconfig/nfs
+
+# See if we are configured to start 
 [ "${SECURE_NFS}" != "yes" ] && exit 6
-
-# List of kernel modules to load
-[ -z "${SECURE_NFS_MODS}" ] && SECURE_NFS_MODS="des rpcsec_gss_krb5"
 
 RETVAL=0
 LOCKFILE=/var/lock/subsys/rpcsvcgssd
@@ -35,6 +26,14 @@
 
 case "$1" in
   start|condstart)
+	# Check that networking is up.
+	[ "${NETWORKING}" = "no" ] && exit 6
+	[ "${SECURE_NFS}" != "yes" ] && exit 6
+	[ ! -x /usr/sbin/rpc.svcgssd ] && exit 5
+
+	# List of kernel modules to load
+	[ -z "${SECURE_NFS_MODS}" ] && SECURE_NFS_MODS="des rpcsec_gss_krb5"
+
 	# Make sure the daemon is not already running.
 	if status $prog > /dev/null ; then
 		exit 0
gdm-2.16.0-31.0.1.el5.i386.rpm: /etc/gdm/PostSession/Default
---  
+++  
@@ -21,6 +21,6 @@
 
 SESSREG=`gdmwhich sessreg`
 if [ "x$SESSREG" != "x" ] ; then
-	"$SESSREG" -d -w /var/log/wtmp -u /var/run/utmp -x "$X_SERVERS" -h "$REMOTE_HOST" -l "$DISPLAY" "$USER"
+	"$SESSREG" -d -u /var/run/utmp -x "$X_SERVERS" -h "$REMOTE_HOST" -l "$DISPLAY" "$USER"
 fi
 exit 0
fontconfig-2.4.1-6.el5.i386.rpm: /etc/fonts/conf.d/30-aliases-fedora.conf
---  
+++  
@@ -42,6 +42,7 @@
 	  <family>Helvetica</family>
 	  <accept>
 	  <family>Nimbus Sans L</family>
+          <family>Liberation Sans</family>
 	  <family>Arial</family>
 	  <family>Albany</family>
 	  <family>Albany AMT</family>
@@ -52,6 +53,7 @@
 	  <family>Times</family>
 	  <accept>
 	  <family>Nimbus Roman No9 L</family>
+          <family>Liberation Serif</family>
 	  <family>Times New Roman</family>
 	  <family>Thorndale</family>
 	  <family>Thorndale AMT</family>
@@ -62,6 +64,7 @@
 	  <family>Courier</family>
 	  <accept>
 	  <family>Nimbus Mono L</family>
+          <family>Liberation Mono</family>
 	  <family>Courier New</family>
 	  <family>Cumberland</family>
 	  <family>Cumberland AMT</family>
@@ -74,6 +77,7 @@
         <alias>
 	  <family>Arial</family>
 	  <accept>
+          <family>Liberation Sans</family>
 	  <family>Albany</family>
 	  <family>Albany AMT</family>
 	  <family>Helvetica</family>
@@ -84,6 +88,7 @@
         <alias>
 	  <family>Times New Roman</family>
 	  <accept>
+          <family>Liberation Serif</family>
 	  <family>Thorndale</family>
 	  <family>Thorndale AMT</family>
 	  <family>Times</family>
@@ -94,6 +99,7 @@
         <alias>
 	  <family>Courier New</family>
 	  <accept>
+          <family>Liberation Mono</family>
 	  <family>Cumberland</family>
 	  <family>Cumberland AMT</family>
 	  <family>Courier</family>
@@ -106,6 +112,7 @@
         <alias>
 	  <family>Albany</family>
 	  <accept>
+          <family>Liberation Sans</family>
 	  <family>Arial</family>
 	  <family>Albany AMT</family>
 	  <family>Helvetica</family>
@@ -116,6 +123,7 @@
         <alias>
 	  <family>Thorndale</family>
 	  <accept>
+          <family>Liberation Serif</family>
 	  <family>Times New Roman</family>
 	  <family>Thorndale AMT</family>
 	  <family>Times</family>
@@ -126,6 +134,7 @@
         <alias>
 	  <family>Cumberland</family>
 	  <accept>
+          <family>Liberation Mono</family>
 	  <family>Courier New</family>
 	  <family>Cumberland AMT</family>
 	  <family>Courier</family>
@@ -138,6 +147,7 @@
         <alias>
 	  <family>Albany AMT</family>
 	  <accept>
+          <family>Liberation Sans</family>
 	  <family>Arial</family>
 	  <family>Albany</family>
 	  <family>Helvetica</family>
@@ -148,6 +158,7 @@
         <alias>
 	  <family>Thorndale AMT</family>
 	  <accept>
+          <family>Liberation Serif</family>
 	  <family>Times New Roman</family>
 	  <family>Thorndale</family>
 	  <family>Times</family>
@@ -158,6 +169,7 @@
         <alias>
 	  <family>Cumberland AMT</family>
 	  <accept>
+          <family>Liberation Mono</family>
 	  <family>Courier New</family>
 	  <family>Cumberland</family>
 	  <family>Courier</family>
lam-devel-7.1.2-8.fc6.i386.rpm: /usr/lib/pkgconfig/lam.pc
---  
+++  
@@ -3,5 +3,5 @@
 Description:	The LAM (Local Area Multicomputer) programming environment.
 URL:		http://www.lam-mpi.org/
 Version:	7.1.2
-Libs:		-L/usr/lib/lam -lmpi
-Cflags: 	-I/usr/include/lam -I@INCLUDEDIR@/32
+Libs:		-L/usr/lib/lam/lib -lmpi
+Cflags: 	-I/usr/lib/lam/include
initscripts-8.45.17.EL-1.i386.rpm: /etc/rc.d/rc.sysinit
---  
+++  
@@ -119,10 +119,12 @@
 	fi
 	if [ -n "$key" -a "x$key" != "xnone" ]; then
 	    if test -e "$key" ; then
+		owner=$(ls -l $key | (read a b owner rest; echo $owner))
+		if ! key_is_random "$key"; then
 		mode=$(ls -l "$key" | cut -c 5-10)
-		owner=$(ls -l $key | awk '{ print $3 }')
-		if [ "$mode" != "------" ] && ! key_is_random "$key"; then
-		    echo $"INSECURE MODE FOR $key"
+		    if [ "$mode" != "------" ]; then
+		       echo $"INSECURE MODE FOR $key"
+		    fi
 		fi
 		if [ "$owner" != root ]; then
 		    echo $"INSECURE OWNER FOR $key"
@@ -139,6 +141,12 @@
 	makeswap=""
 	mke2fs=""
 	skip=""
+	# Parse the src field for UUID= and convert to real device names
+	if [ "${src%%=*}" == "UUID" ]; then
+		src=`/sbin/blkid -t "$src" -o device|(read oneline;echo $oneline)`
+	elif [ "${src/^\/dev\/disk\/by-uuid\/}" != "$src" ]; then
+		src=$(__readlink $src)
+	fi
 	# Parse the options field, convert to cryptsetup parameters
 	# and contruct the command line
 	while [ -n "$opt" ]; do
@@ -695,11 +703,27 @@
 	action $"Checking local filesystem quotas: " /sbin/quotacheck -aRnug
 fi
 
+remount_needed() {
+  local state oldifs
+  [ "$READONLY" = "yes" ] && return 1
+  state=`LC_ALL=C awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts`
+  oldifs=$IFS
+  IFS=","
+  for opt in $state ; do
+  	if [ "$opt" = "rw" ]; then
+		IFS=$oldifs
+		return 1
+	fi
+  done
+  IFS=$oldifs
+  return 0
+}
+ 
 # Remount the root filesystem read-write.
 update_boot_stage RCmountfs
-state=`LC_ALL=C awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts`
-[ "$state" != "rw" -a "$READONLY" != "yes" ] && \
+if remount_needed ; then
   action $"Remounting root filesystem in read-write mode: " mount -n -o remount,rw /
+fi
 
 # Clean up SELinux labels
 if [ -n "$SELINUX_STATE" ]; then
@@ -779,14 +803,14 @@
     if [ -x /usr/bin/passwd ]; then 
         /usr/bin/passwd root
     fi
-    if [ -x /usr/sbin/netconfig ]; then
-	/usr/sbin/netconfig
+    if [ -x /usr/sbin/system-config-network-tui ]; then
+	/usr/sbin/system-config-network-tui
     fi
     if [ -x /usr/sbin/timeconfig ]; then
 	/usr/sbin/timeconfig
     fi
-    if [ -x /usr/sbin/authconfig ]; then
-	/usr/sbin/authconfig --nostart
+    if [ -x /usr/sbin/authconfig-tui ]; then
+	/usr/sbin/authconfig-tui --nostart
     fi
     if [ -x /usr/sbin/ntsysv ]; then
 	/usr/sbin/ntsysv --level 35
nfs-utils-1.0.9-24.el5.i386.rpm: /etc/rc.d/init.d/nfslock
---  
+++  
@@ -13,17 +13,10 @@
 . /etc/rc.d/init.d/functions
 
 # Source networking configuration.
-if [ ! -f /etc/sysconfig/network ]; then
-    exit 6
-fi
+[ -f /etc/sysconfig/network ] && . /etc/sysconfig/network
 
 # Check for and source configuration file
 [ -f /etc/sysconfig/nfs ] && . /etc/sysconfig/nfs
-
-. /etc/sysconfig/network
-
-# Check that networking is up.
-[ "${NETWORKING}" = "no" ] && exit 6
 
 # Start lockd from userland only if kernel <= 2.2.18
 OS_RELEASE=`uname --release`
@@ -37,22 +30,25 @@
     USERLAND_LOCKD=
 fi
 
-if [ "$USERLAND_LOCKD" ] ; then
-    [ -x /sbin/rpc.lockd ] || exit 5
-fi
+RETVAL=0
+start() {
+	# Check that networking is up.
+	[ "${NETWORKING}" = "no" ] && exit 6
 
-[ -x /sbin/rpc.statd ] || exit 5 
+	if [ "$USERLAND_LOCKD" ] ; then
+    	[ -x /sbin/rpc.lockd ] || exit 5
+	fi
+	[ -x /sbin/rpc.statd ] || exit 5 
 
-RETVAL=0
-if [ -n "${STATD_HOSTNAME}" ]; then
-    STATDARG="-n ${STATD_HOSTNAME}"
-else
-    STATDARG=""
-fi
+	if [ -n "${STATD_HOSTNAME}" ]; then
+    	STATDARG="-n ${STATD_HOSTNAME}"
+	else
+    	STATDARG=""
+	fi
 
-
-start() {
-    if [ ! -f /var/lock/subsys/nfslock ]; then
+	if [ -f /var/lock/subsys/nfslock ]; then
+		return $RETVAL
+	fi
 	# Start daemons.
 	if [ "$USERLAND_LOCKD" ]; then
 	  echo -n $"Starting NFS locking: "
@@ -62,12 +58,10 @@
 	# See if the kernel lockd should start up 
 	# listening on a particular port
 	#
-		LOCKDARG=""
-		[ -n "$LOCKD_TCPPORT" ] && LOCKDARG="nlm_tcpport=$LOCKD_TCPPORT"
+		[ -n "$LOCKD_TCPPORT" ] && \
+			/sbin/sysctl -w fs.nfs.nlm_tcpport=$LOCKD_TCPPORT >/dev/null 2>&1
 		[ -n "$LOCKD_UDPPORT" ] && \
-			LOCKDARG="$LOCKDARG nlm_udpport=$LOCKD_UDPPORT"
-		[ -n "$LOCKDARG" ]  && \
-			modprobe lockd $LOCKDARG
+			/sbin/sysctl -w fs.nfs.nlm_udpport=$LOCKD_UDPPORT >/dev/null 2>&1
 	fi  
 	echo -n $"Starting NFS statd: "
 	# See if a statd's ports has been defined
@@ -81,7 +75,6 @@
 	RETVAL=$?
 	echo
 	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/nfslock
-    fi
     return $RETVAL
 }
 
dhcpv6-0.10-33.el5.i386.rpm: /etc/rc.d/init.d/dhcp6s
---  
+++  
@@ -1,83 +1,107 @@
 #!/bin/sh
 #
-# dhcp6s        dhcp6s is an implementation of DHCPv6 server.
-#               This shell script takes care of starting and stopping
-#               dhcp6s.
+### BEGIN INIT INFO
+# Provides: dhcp6s
+# Default-Start:
+# Default-Stop:
+# Should-Start:
+# Required-Start: $network
+# Required-Stop:
+# Short-Description: Start and stop the DHCPv6 server agent
+# Description: dhcp6s provides IPv6 addresses and prefix assignment
+#              administrative policy and configuration information for
+#              DHCPv6 clients.  dhcp6s also manages those addresses and
+#              prefixes, such as IPv6 addresses, prefixes, DNS server
+#              addresses, or ntp server addresses.
+### END INIT INFO
+#
+# The fields below are left around for legacy tools (will remove later).
 #
 # chkconfig: - 66 36
-# description: dhcp6s supports server side of  Dynamic Host Configuration \
-#              Protocol for IPv6.
+# description: dhcp6s provides IPv6 addresses and prefix assignment \
+#              administrative policy and configuration information for \
+#              DHCPv6 clients.  dhcp6s also manages those addresses and \
+#              prefixes, such as IPv6 addresses, prefixes, DNS server \
+#              addresses, or ntp server addresses.
 # processname: dhcp6s
 # config: /etc/dhcp6s.conf
 # config: /etc/sysconfig/dhcp6s
 
-# Source function library.
-. /etc/rc.d/init.d/functions
+. /etc/init.d/functions
 
-# Source networking configuration.
-. /etc/sysconfig/network
-. /etc/sysconfig/dhcp6s
+RETVAL=0
+
+prog=dhcp6s
+dhcp6s=/usr/sbin/dhcp6s
+lockfile=/var/lock/subsys/dhcp6s
 
 # Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
-# Check that files exist
-[ -x /usr/sbin/dhcp6s ] || exit 0
-[ -f /etc/dhcp6s.conf ] || exit 0
-
-if [ "x$DHCP6SIF" =  "x" ]; then logger -s -t "dhcp6s" -p "daemon.info" "Warning: dhcp6s listening on ALL interfaces - set DHCP6SIF in /etc/sysconfig/dhcp6s"; fi
-
-RETVAL=0
-prog="dhcp6s"
+# networking is not up, return 1 for generic error
+. /etc/sysconfig/network
+[ $NETWORKING = "no" ] && exit 1
 
 start() {
-	# Start daemons.
-	echo -n $"Starting $prog: "
-	daemon /usr/sbin/dhcp6s -c /etc/dhcp6s.conf ${DHCP6SARGS} ${DHCP6SIF}
-	RETVAL=$?
-	echo
-	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/dhcp6s
-	return $RETVAL
+    # return 5 if program is not installed
+    [ -x $dhcp6s ] || exit 5
+
+    # return 6 if program is not configured
+    [ -f /etc/dhcp6s.conf ] || exit 6
+    [ -f /etc/sysconfig/dhcp6s ] || exit 6
+    . /etc/sysconfig/dhcp6s
+
+    if [ -z "$DHCP6SIF" ]; then
+        logger -s -t "$prog" -p "daemon.info" "Warning: $prog listening on ALL interfaces"
+    fi
+
+    echo -n $"Starting $prog: "
+    daemon $dhcp6s -c /etc/dhcp6s.conf $DHCP6SARGS $DHCP6SIF
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && touch $lockfile
+    return $RETVAL
 }
 
 stop() {
-	# Stop daemons.
-	echo -n $"Shutting down $prog: "
-	killproc dhcp6s
-	RETVAL=$?
-	echo
-	[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/dhcp6s
-	return $RETVAL
+    echo -n $"Shutting down $prog: "
+    killproc $prog -TERM
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && success || failure
+    echo
+    rm -f $lockfile
+    return $RETVAL
 }
 
 # See how we were called.
 case "$1" in
-  start)
-	start
-	;;
-  stop)
-	stop
-	;;
-  restart|reload)
-	stop
-	start
-	RETVAL=$?
-	;;
-  condrestart)
-	if [ -f /var/lock/subsys/dhcp6s ]; then
-	    stop
-	    start
-	    RETVAL=$?
-	fi
-	;;
-  status)
-	status dhcp6s
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|condrestart|status}"
-	exit 1
+    start)
+        start
+        RETVAL=$?
+        ;;
+    stop)
+        stop
+        RETVAL=$?
+        ;;
+    restart|force-reload)
+        stop && start
+        RETVAL=$?
+        ;;
+    try-restart|reload)
+        RETVAL=3
+        ;;
+    condrestart)
+        if [ -f $lockfile ]; then
+            stop && start
+        fi
+        ;;
+    status)
+        status $prog
+        RETVAL=$?
+        ;;
+    *)
+        echo $"Usage: $0 {start|stop|restart|try-restart|reload|force-reload|status}"
+        RETVAL=3
+        ;;
 esac
 
 exit $RETVAL
-
dhcpv6-0.10-33.el5.i386.rpm: /etc/rc.d/init.d/dhcp6r
---  
+++  
@@ -1,80 +1,95 @@
 #!/bin/sh
 #
-# dhcp6r        dhcp6r is an implementation of DHCPv6 relay agent.
-#               This shell script takes care of starting and stopping
-#               dhcp6r.
+### BEGIN INIT INFO
+# Provides: dhcp6r
+# Default-Start:
+# Default-Stop:
+# Should-Start:
+# Required-Start: $network
+# Required-Stop:
+# Short-Description: Start and stop the DHCPv6 relay agent
+# Description: dhcp6r acts as a DHCPv6 relay agent forwarding DHCPv6 messages
+#              from clients to servers and vice versa.
+### END INIT INFO
+#
+# The fields below are left around for legacy tools (will remove later).
 #
 # chkconfig: - 66 36
-# description: dhcp6r supports the DHCPv6 relay agent protocol. 
-#            
+# description: dhcp6r acts as a DHCPv6 relay agent forwarding DHCPv6 messages \
+#              from clients to servers and vice versa.
 # processname: dhcp6r
 # config: /etc/sysconfig/dhcp6r
 
-# Source function library.
-. /etc/rc.d/init.d/functions
+. /etc/init.d/functions
 
-# Source networking configuration.
-. /etc/sysconfig/network
-. /etc/sysconfig/dhcp6r
+RETVAL=0
+
+prog=dhcp6r
+dhcp6r=/usr/sbin/dhcp6r
+lockfile=/var/lock/subsys/dhcp6r
 
 # Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
-# Check that files exist
-[ -f /usr/sbin/dhcp6r ] || exit 0
-[ -f /etc/sysconfig/dhcp6r ] || exit 0
-
-RETVAL=0
-prog="dhcp6r"
+# networking is not up, return 1 for generic error
+. /etc/sysconfig/network
+[ $NETWORKING = "no" ] && exit 1
 
 start() {
-	# Start daemons.
-	echo -n $"Starting $prog: "
-	daemon /usr/sbin/dhcp6r ${DHCP6RARGS}
-	RETVAL=$?
-	echo
-	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/dhcp6r
-	return $RETVAL
+    # return 5 if program is not installed
+    [ -x $dhcp6r ] || exit 5
+
+    # return 6 if program is not configured
+    [ -f /etc/sysconfig/dhcp6r ] || exit 6
+    . /etc/sysconfig/dhcp6r
+
+    echo -n $"Starting $prog: "
+    daemon $dhcp6r $DHCP6RARGS
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && touch $lockfile
+    return $RETVAL
 }
 
 stop() {
-	# Stop daemons.
-	echo -n $"Shutting down $prog: "
-	killproc dhcp6r
-	RETVAL=$?
-	echo
-	[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/dhcp6r
-	return $RETVAL
+    echo -n $"Shutting down $prog: "
+    killproc $prog -TERM
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && success || failure
+    echo
+    rm -f $lockfile
+    return $RETVAL
 }
 
 # See how we were called.
 case "$1" in
-  start)
-	start
-	;;
-  stop)
-	stop
-	;;
-  restart|reload)
-	stop
-	start
-	RETVAL=$?
-	;;
-  condrestart)
-	if [ -f /var/lock/subsys/dhcp6s ]; then
-	    stop
-	    start
-	    RETVAL=$?
-	fi
-	;;
-  status)
-	status dhcp6r
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|condrestart|status}"
-	exit 1
+    start)
+        start
+        RETVAL=$?
+        ;;
+    stop)
+        stop
+        RETVAL=$?
+        ;;
+    restart|force-reload)
+        stop && start
+        RETVAL=$?
+        ;;
+    try-restart|reload)
+        RETVAL=3
+        ;;
+    condrestart)
+        if [ -f $lockfile ]; then
+            stop && start
+        fi
+        ;;
+    status)
+        status dhcp6r
+        RETVAL=$?
+        ;;
+    *)
+        echo $"Usage: $0 {start|stop|restart|try-restart|reload|force-reload|status}"
+        RETVAL=3
+        ;;
 esac
 
 exit $RETVAL
-
sysklogd-1.4.1-40.el5.i386.rpm: /etc/rc.d/init.d/syslog
---  
+++  
@@ -14,25 +14,25 @@
 # Source function library.
 . /etc/init.d/functions
 
-[ -f /sbin/syslogd ] || exit 0
-[ -f /sbin/klogd ] || exit 0
-
-# Source config
-if [ -f /etc/sysconfig/syslog ] ; then
-	. /etc/sysconfig/syslog
-else
-	SYSLOGD_OPTIONS="-m 0"
-	KLOGD_OPTIONS="-2"
-fi
-
 RETVAL=0
 
-if [ -z "$SYSLOG_UMASK" ] ; then
-      SYSLOG_UMASK=077;
-fi
-umask $SYSLOG_UMASK
+start() {
+	[ -x /sbin/syslogd ] || exit 5
+	[ -x /sbin/klogd ] || exit 5
 
-start() {
+	# Source config
+	if [ -f /etc/sysconfig/syslog ] ; then
+		. /etc/sysconfig/syslog
+	else
+		SYSLOGD_OPTIONS="-m 0"
+		KLOGD_OPTIONS="-2"
+	fi
+
+	if [ -z "$SYSLOG_UMASK" ] ; then
+	      SYSLOG_UMASK=077;
+	fi
+	umask $SYSLOG_UMASK
+
  	echo -n $"Starting system logger: "
 	daemon syslogd $SYSLOGD_OPTIONS
 	RETVAL=$?
@@ -66,12 +66,12 @@
     RETVAL=1
     syslog=`cat /var/run/syslogd.pid 2>/dev/null`
     echo -n "Reloading syslogd..."
-    if [ -n ${syslog} ] && [ -e /proc/${syslog} ]; then
-	kill -HUP $syslog;
+    if [ -n "${syslog}" ] && [ -e /proc/"${syslog}" ]; then
+	kill -HUP "$syslog";
 	RETVAL=$?
     fi
     if [ $RETVAL -ne 0 ]; then
-	fail
+	failure
     else
 	success
     fi
@@ -79,12 +79,12 @@
     RETVAL=1
     echo -n "Reloading klogd..."
     klog=`cat /var/run/klogd.pid 2>/dev/null`
-    if [ -n ${klog} ] && [ -e /proc/${klog} ]; then
-	kill -USR2 $klog;
+    if [ -n "${klog}" ] && [ -e /proc/"${klog}" ]; then
+	kill -USR2 "$klog";
         RETVAL=$?
     fi
     if [ $RETVAL -ne 0 ]; then
-	fail
+	failure
     else
 	success
     fi
@@ -112,7 +112,7 @@
 	;;
   *)
 	echo $"Usage: $0 {start|stop|status|restart|condrestart}"
-	exit 1
+	exit 2
 esac
 
 exit $?
NetworkManager-0.6.4-6.el5.i386.rpm: /etc/dbus-1/system.d/NetworkManager.conf
---  
+++  
@@ -17,5 +17,7 @@
                 <deny send_destination="org.freedesktop.NetworkManager"/>
                 <deny send_interface="org.freedesktop.NetworkManager"/>
         </policy>
+
+        <limit name="max_replies_per_connection">512</limit>
 </busconfig>
 
initscripts-8.45.17.EL-1.i386.rpm: /etc/sysconfig/network-scripts/ifup-eth
---  
+++  
@@ -125,7 +125,16 @@
     for arg in $BONDING_OPTS ; do   
         key=${arg%%=*};
         value=${arg##*=};
-        echo $value > /sys/class/net/${DEVICE}/bonding/$key
+        if [ "${key}" = "arp_ip_target" ]; then
+            OLDIFS=$IFS;
+            IFS=',';
+            for arp_ip in $value; do
+                echo +$arp_ip > /sys/class/net/${DEVICE}/bonding/$key
+            done
+            IFS=$OLDIFS;
+        else
+            echo $value > /sys/class/net/${DEVICE}/bonding/$key
+        fi
     done
 
     /sbin/ip link set dev ${DEVICE} up
system-config-lvm-1.0.22-1.0.el5.noarch.rpm: /etc/pam.d/system-config-lvm
---  
+++  
@@ -1,8 +1,4 @@
 #%PAM-1.0
-auth       sufficient	pam_rootok.so
-auth       sufficient   pam_timestamp.so
-auth       required	pam_stack.so service=system-auth
-session	   required	pam_permit.so
-session    optional	pam_xauth.so
-session    optional     pam_timestamp.so
-account    required	pam_permit.so
+auth			include			config-util
+account			include			config-util
+session			include			config-util
caching-nameserver-9.3.3-10.el5.i386.rpm: /var/named/named.ca
---  
+++  
@@ -1,80 +1,53 @@
-;       This file holds the information on root name servers needed to
-;       initialize cache of Internet domain name servers
-;       (e.g. reference this file in the "cache  .  <file>"
-;       configuration file of BIND domain name servers).
-;
-;       This file is made available by InterNIC 
-;       under anonymous FTP as
-;           file                /domain/named.cache
-;           on server           FTP.INTERNIC.NET
-;       -OR-                    RS.INTERNIC.NET
-;
-;       last update:    Jan 29, 2004
-;       related version of root zone:   2004012900
-;
-;
-; formerly NS.INTERNIC.NET
-;
-.                        3600000  IN  NS    A.ROOT-SERVERS.NET.
-A.ROOT-SERVERS.NET.      3600000      A     198.41.0.4
-;
-; formerly NS1.ISI.EDU
-;
-.                        3600000      NS    B.ROOT-SERVERS.NET.
-B.ROOT-SERVERS.NET.      3600000      A     192.228.79.201
-;
-; formerly C.PSI.NET
-;
-.                        3600000      NS    C.ROOT-SERVERS.NET.
-C.ROOT-SERVERS.NET.      3600000      A     192.33.4.12
-;
-; formerly TERP.UMD.EDU
-;
-.                        3600000      NS    D.ROOT-SERVERS.NET.
-D.ROOT-SERVERS.NET.      3600000      A     128.8.10.90
-;
-; formerly NS.NASA.GOV
-;
-.                        3600000      NS    E.ROOT-SERVERS.NET.
-E.ROOT-SERVERS.NET.      3600000      A     192.203.230.10
-;
-; formerly NS.ISC.ORG
-;
-.                        3600000      NS    F.ROOT-SERVERS.NET.
-F.ROOT-SERVERS.NET.      3600000      A     192.5.5.241
-;
-; formerly NS.NIC.DDN.MIL
-;
-.                        3600000      NS    G.ROOT-SERVERS.NET.
-G.ROOT-SERVERS.NET.      3600000      A     192.112.36.4
-;
-; formerly AOS.ARL.ARMY.MIL
-;
-.                        3600000      NS    H.ROOT-SERVERS.NET.
-H.ROOT-SERVERS.NET.      3600000      A     128.63.2.53
-;
-; formerly NIC.NORDU.NET
-;
-.                        3600000      NS    I.ROOT-SERVERS.NET.
-I.ROOT-SERVERS.NET.      3600000      A     192.36.148.17
-;
-; operated by VeriSign, Inc.
-;
-.                        3600000      NS    J.ROOT-SERVERS.NET.
-J.ROOT-SERVERS.NET.      3600000      A     192.58.128.30
-;
-; operated by RIPE NCC
-;
-.                        3600000      NS    K.ROOT-SERVERS.NET.
-K.ROOT-SERVERS.NET.      3600000      A     193.0.14.129 
-;
-; operated by ICANN
-;
-.                        3600000      NS    L.ROOT-SERVERS.NET.
-L.ROOT-SERVERS.NET.      3600000      A     198.32.64.12
-;
-; operated by WIDE
-;
-.                        3600000      NS    M.ROOT-SERVERS.NET.
-M.ROOT-SERVERS.NET.      3600000      A     202.12.27.33
-; End of File
+
+; <<>> DiG 9.5.0b2 <<>> +bufsize=1200 +norec NS . @a.root-servers.net
+;; global options:  printcmd
+;; Got answer:
+;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 7033
+;; flags: qr aa; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 20
+
+;; OPT PSEUDOSECTION:
+; EDNS: version: 0, flags:; udp: 4096
+;; QUESTION SECTION:
+;.				IN	NS
+
+;; ANSWER SECTION:
+.			518400	IN	NS	D.ROOT-SERVERS.NET.
+.			518400	IN	NS	E.ROOT-SERVERS.NET.
+.			518400	IN	NS	F.ROOT-SERVERS.NET.
+.			518400	IN	NS	G.ROOT-SERVERS.NET.
+.			518400	IN	NS	H.ROOT-SERVERS.NET.
+.			518400	IN	NS	I.ROOT-SERVERS.NET.
+.			518400	IN	NS	J.ROOT-SERVERS.NET.
+.			518400	IN	NS	K.ROOT-SERVERS.NET.
+.			518400	IN	NS	L.ROOT-SERVERS.NET.
+.			518400	IN	NS	M.ROOT-SERVERS.NET.
+.			518400	IN	NS	A.ROOT-SERVERS.NET.
+.			518400	IN	NS	B.ROOT-SERVERS.NET.
+.			518400	IN	NS	C.ROOT-SERVERS.NET.
+
+;; ADDITIONAL SECTION:
+A.ROOT-SERVERS.NET.	3600000	IN	A	198.41.0.4
+A.ROOT-SERVERS.NET.	3600000	IN	AAAA	2001:503:ba3e::2:30
+B.ROOT-SERVERS.NET.	3600000	IN	A	192.228.79.201
+C.ROOT-SERVERS.NET.	3600000	IN	A	192.33.4.12
+D.ROOT-SERVERS.NET.	3600000	IN	A	128.8.10.90
+E.ROOT-SERVERS.NET.	3600000	IN	A	192.203.230.10
+F.ROOT-SERVERS.NET.	3600000	IN	A	192.5.5.241
+F.ROOT-SERVERS.NET.	3600000	IN	AAAA	2001:500:2f::f
+G.ROOT-SERVERS.NET.	3600000	IN	A	192.112.36.4
+H.ROOT-SERVERS.NET.	3600000	IN	A	128.63.2.53
+H.ROOT-SERVERS.NET.	3600000	IN	AAAA	2001:500:1::803f:235
+I.ROOT-SERVERS.NET.	3600000	IN	A	192.36.148.17
+J.ROOT-SERVERS.NET.	3600000	IN	A	192.58.128.30
+J.ROOT-SERVERS.NET.	3600000	IN	AAAA	2001:503:c27::2:30
+K.ROOT-SERVERS.NET.	3600000	IN	A	193.0.14.129
+K.ROOT-SERVERS.NET.	3600000	IN	AAAA	2001:7fd::1
+L.ROOT-SERVERS.NET.	3600000	IN	A	199.7.83.42
+M.ROOT-SERVERS.NET.	3600000	IN	A	202.12.27.33
+M.ROOT-SERVERS.NET.	3600000	IN	AAAA	2001:dc3::35
+
+;; Query time: 110 msec
+;; SERVER: 198.41.0.4#53(198.41.0.4)
+;; WHEN: Tue Feb 26 15:05:57 2008
+;; MSG SIZE  rcvd: 615
+
initscripts-8.45.17.EL-1.i386.rpm: /etc/rc.d/init.d/functions
---  
+++  
@@ -67,6 +67,10 @@
 		[ -d "/proc/$i" ] && return 0
 	done
 	return 1
+}
+
+__readlink() {
+    ls -bl "$@" 2>/dev/null| awk '{ print $NF }'
 }
 
 # __umount_loop awk_program fstab_file first_msg retry_msg umount_args
totem-2.16.7-1.el5.i386.rpm: /etc/gconf/schemas/totem-handlers.schemas
---  
+++  
@@ -1,44 +1,5 @@
 <gconfschemafile>
     <schemalist>
-
-        <schema>
-            <key>/schemas/desktop/gnome/url-handlers/pnm/command</key>
-            <applyto>/desktop/gnome/url-handlers/pnm/command</applyto>
-            <owner>totem</owner>
-            <type>string</type>
-            <default>totem "%s"</default>
-            <locale name="C">
-                <short></short>
-                <long></long>
-            </locale>
-        </schema>
-
-
-        <schema>
-            <key>/schemas/desktop/gnome/url-handlers/pnm/needs_terminal</key>
-            <applyto>/desktop/gnome/url-handlers/pnm/needs_terminal</applyto>
-            <owner>totem</owner>
-            <type>bool</type>
-            <default>false</default>
-            <locale name="C">
-                <short></short>
-                <long></long>
-            </locale>
-        </schema>
-
-
-        <schema>
-            <key>/schemas/desktop/gnome/url-handlers/pnm/enabled</key>
-            <applyto>/desktop/gnome/url-handlers/pnm/enabled</applyto>
-            <owner>totem</owner>
-            <type>bool</type>
-            <default>true</default>
-            <locale name="C">
-                <short></short>
-                <long></long>
-            </locale>
-        </schema>
-
 
         <schema>
             <key>/schemas/desktop/gnome/url-handlers/mms/command</key>
@@ -158,45 +119,6 @@
 
 
         <schema>
-            <key>/schemas/desktop/gnome/url-handlers/rtsp/command</key>
-            <applyto>/desktop/gnome/url-handlers/rtsp/command</applyto>
-            <owner>totem</owner>
-            <type>string</type>
-            <default>totem "%s"</default>
-            <locale name="C">
-                <short></short>
-                <long></long>
-            </locale>
-        </schema>
-
-
-        <schema>
-            <key>/schemas/desktop/gnome/url-handlers/rtsp/needs_terminal</key>
-            <applyto>/desktop/gnome/url-handlers/rtsp/needs_terminal</applyto>
-            <owner>totem</owner>
-            <type>bool</type>
-            <default>false</default>
-            <locale name="C">
-                <short></short>
-                <long></long>
-            </locale>
-        </schema>
-
-
-        <schema>
-            <key>/schemas/desktop/gnome/url-handlers/rtsp/enabled</key>
-            <applyto>/desktop/gnome/url-handlers/rtsp/enabled</applyto>
-            <owner>totem</owner>
-            <type>bool</type>
-            <default>true</default>
-            <locale name="C">
-                <short></short>
-                <long></long>
-            </locale>
-        </schema>
-
-
-        <schema>
             <key>/schemas/desktop/gnome/url-handlers/mmsh/command</key>
             <applyto>/desktop/gnome/url-handlers/mmsh/command</applyto>
             <owner>totem</owner>
shadow-utils-4.0.17-12.el5.i386.rpm: /etc/default/useradd
---  
+++  
@@ -5,3 +5,5 @@
 EXPIRE=
 SHELL=/bin/bash
 SKEL=/etc/skel
+CREATE_MAIL_SPOOL=yes
+
udev-095-14.9.el5.i386.rpm: /etc/udev/rules.d/50-udev.rules
---  
+++  
@@ -162,8 +162,6 @@
 SUBSYSTEM=="dvb", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}'", \
 	NAME="%c", MODE="0660"
 
-KERNEL=="dm-[0-9]*", ACTION=="add", OPTIONS+="ignore_device"
-
 # alsa devices
 KERNEL=="controlC[0-9]*",	NAME="snd/%k"
 KERNEL=="hw[CD0-9]*",		NAME="snd/%k"
@@ -175,6 +173,9 @@
 # input devices
 KERNEL=="mice",			NAME="input/%k"
 KERNEL=="mouse*",		NAME="input/%k"
+
+KERNEL=="event*", SYSFS{idVendor}=="03f0", SYSFS{device/interface}=="Virtual Mouse", SYSFS{device/bInterfaceProtocol}=="02", NAME="input/%k", SYMLINK+="input/hp_ilo_mouse"
+
 KERNEL=="event*",		NAME="input/%k"
 KERNEL=="js*",			NAME="input/%k", SYMLINK+="%k"
 KERNEL=="ts*",			NAME="input/%k"
@@ -218,8 +219,6 @@
 KERNEL=="scd[0-9]*",		SYMLINK+="cdrom cdrom-%k"
 KERNEL=="pcd[0-9]*",		SYMLINK+="cdrom cdrom-%k"
 KERNEL=="fd[0-9]*",		SYMLINK+="floppy floppy-%k"
-KERNEL=="nst[0-9]", BUS=="scsi", 	SYMLINK+="tape tape-%k", MODE="0660"
-KERNEL=="nosst[0-9]", BUS=="scsi", 	SYMLINK+="tape tape-%k", MODE="0660"
 
 # Section for zaptel device
 KERNEL=="zapctl",     		NAME="zap/ctl"
@@ -259,16 +258,18 @@
 
 ACTION!="add", GOTO="persistent_end"
 
-KERNEL=="nst[0-9]", IMPORT{parent}=="ID_*"
-KERNEL=="nst[0-9]", SUBSYSTEM=="scsi", ENV{ID_SERIAL}=="", IMPORT{program}="scsi_id -g -x -s %p -d $tempnode"
-KERNEL=="nst[0-9]", SUBSYSTEM=="scsi", ENV{ID_SERIAL}=="", IMPORT{program}="scsi_id -g -x -a -s %p -d $tempnode"
-KERNEL=="nst[0-9]", SUBSYSTEM=="scsi", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst"
+KERNEL=="dm-[0-9]*", GOTO="persistent_end"
+
+KERNEL=="nst[0-9]*", IMPORT{parent}=="ID_*"
+KERNEL=="nst[0-9]*", SUBSYSTEM=="scsi_tape", ENV{ID_SERIAL}=="", IMPORT{program}="scsi_id -u -g -x -s %p -d $tempnode"
+KERNEL=="nst[0-9]*", SUBSYSTEM=="scsi_tape", ENV{ID_SERIAL}=="", IMPORT{program}="scsi_id -u -g -x -a -s %p -d $tempnode"
+KERNEL=="nst[0-9]*", SUBSYSTEM=="scsi_tape", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst"
 
 # type 8 devices are "Medium Changers"
 KERNEL=="sg*", IMPORT{parent}=="ID_*"
-KERNEL=="sg*", SUBSYSTEM=="scsi", SYSFS{type}=="8", ENV{ID_SERIAL}=="", IMPORT{program}="scsi_id -g -x -s %p -d $tempnode"
-KERNEL=="sg*", SUBSYSTEM=="scsi", SYSFS{type}=="8", ENV{ID_SERIAL}=="", IMPORT{program}="scsi_id -g -x -a -s %p -d $tempnode"
-KERNEL=="sg*", SUBSYSTEM=="scsi", SYSFS{type}=="8", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+KERNEL=="sg*", SUBSYSTEM=="scsi_generic", SYSFS{type}=="8", ENV{ID_SERIAL}=="", IMPORT{program}="scsi_id -g -u -x -s %p -d $tempnode"
+KERNEL=="sg*", SUBSYSTEM=="scsi_generic", SYSFS{type}=="8", ENV{ID_SERIAL}=="", IMPORT{program}="scsi_id -g -u -x -a -s %p -d $tempnode"
+KERNEL=="sg*", SUBSYSTEM=="scsi_generic", SYSFS{type}=="8", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
 
 SUBSYSTEM!="block", GOTO="persistent_end"
 
@@ -289,11 +290,13 @@
 KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}=="", IMPORT{program}="/lib/udev/scsi_id -g -x -s %p -d $tempnode"
 KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}=="", IMPORT{program}="/lib/udev/scsi_id -g -x -a -s %p -d $tempnode"
 KERNEL=="dasd*[!0-9]", IMPORT{program}="/lib/udev/dasd_id --export $tempnode"
-KERNEL=="st*|sd*[!0-9]|sr*|dasd*[!0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+KERNEL=="nst[0-9]*|st*|sd*[!0-9]|sr*|dasd*[!0-9]|cciss?c", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
 
 # for partitions import parent information
 KERNEL=="sd*[0-9]|dasd*[0-9]", IMPORT{parent}=="ID_*"
-KERNEL=="sd*[0-9]|dasd*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
+KERNEL=="cciss?c[0-9]d[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id -g -x -s %p -d $tempnode", ENV{ID_BUS}="cciss"
+KERNEL=="cciss?c[0-9]d[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id -g -x -a -s %p -d $tempnode", ENV{ID_BUS}="cciss"
+KERNEL=="sd*[0-9]|dasd*[0-9]|cciss*p[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
 
 # by-path (shortest physical path)
 KERNEL=="*[!0-9]|sr*", ENV{ID_TYPE}=="?*", IMPORT{program}="/lib/udev/path_id %p", SYMLINK+="disk/by-path/$env{ID_PATH}"
dhcp-3.0.5-7.el5.i386.rpm: /etc/rc.d/init.d/dhcrelay
---  
+++  
@@ -1,82 +1,123 @@
 #!/bin/sh
 #
-# dhcrelay      This shell script takes care of starting and stopping
-#               dhcrelay.
+### BEGIN INIT INFO
+# Provides: dhcrelay
+# Default-Start:
+# Default-Stop:
+# Should-Start:
+# Required-Start: $network
+# Required-Stop:
+# Short-Description: Start and stop the DHCP relay server
+# Description: dhcrelay provides the Dynamic Host Configuration Protocol (DHCP)
+#              relay server.  This is required when your DHCP server is on
+#              another network segment from the clients.
+### END INIT INFO
 #
-# chkconfig: - 66 34
+# The fields below are left around for legacy tools (will remove later).
+#
+# chkconfig: - 65 35
 # description: dhcrelay provides a relay for Dynamic Host Control Protocol.
+# processname: dhcrelay
+# # pidfile: /var/run/dhcrelay.pid
 
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-# Source dhcrelay configuration. We can't default a DHCPSERVERS entry!
-if [ -f /etc/sysconfig/dhcrelay ] ; then
-	. /etc/sysconfig/dhcrelay
-	[ -n "$DHCPSERVERS" ] || exit 0
-else
-	exit 0
-fi
-
-# Check that networking is up.
-[ ${NETWORKING} = "no" ] && exit 0
-
-[ -f /usr/sbin/dhcrelay ] || exit 0
+. /etc/init.d/functions
 
 RETVAL=0
-prog="dhcrelay"
+
+prog=dhcrelay
+dhcrelay=/usr/sbin/dhcrelay
+lockfile=/var/lock/subsys/dhcrelay
+pidfile=/var/run/dhcrelay.pid
+conf=/etc/sysconfig/dhcrelay
+
+# The dhcrelay daemon uses the sysconfig file for configuration information.
+# There is no native configuration file for this program and you must specify
+# its settings on the command line.
+[ -f /etc/sysconfig/dhcrelay ] && . /etc/sysconfig/dhcrelay
+
+configtest() {
+    [ -x $dhcrelay ] || exit 5
+    [ -f $conf ] || exit 6
+    [ -z "$DHCPSERVERS" ] && exit 6
+    RETVAL=0
+    return $RETVAL
+}
 
 start() {
-	# Start daemons.
-	echo -n $"Starting $prog: "
-	daemon /usr/sbin/dhcrelay \
-		$([ -n "$INTERFACES" ] && for int in $INTERFACES ; do echo -n " -i $int" ; done) \
-		$DHCPSERVERS
-	RETVAL=$?
-	echo
-	[ $RETVAL -eq 0 ] && touch /var/lock/subsys/dhcrelay
-	return $RETVAL
+    [ -x $dhcrelay ] || exit 5
+    [ -f $conf ] || exit 6
+
+    pidofproc $prog >/dev/null 2>&1
+    RETVAL=$?
+    [ $RETVAL -eq 0 ] && return $RETVAL
+
+    echo -n $"Starting $prog: "
+    daemon $dhcrelay $([ -n "$INTERFACES" ] && for int in $INTERFACES ; do echo -n " -i $int" ; done) $DHCPSERVERS 2>/dev/null
+    RETVAL=$?
+    echo
+    [ $RETVAL -eq 0 ] && touch $lockfile
+    return $RETVAL
 }
 
 stop() {
-	# Stop daemons.
-	echo -n $"Shutting down $prog: "
-	killproc dhcrelay
-	RETVAL=$?
-	echo
-	[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/dhcrelay
-	return $RETVAL
+    pidofproc $prog >/dev/null 2>&1
+    if [ $? -ne 0 ]; then
+        RETVAL=7
+        return $RETVAL
+    fi
+
+    echo -n $"Shutting down $prog: "
+    killproc $prog -TERM
+    RETVAL=$?
+    [ $RETVAL = 0 ] && rm -f $lockfile
+    echo
+    return $RETVAL
 }
 
-# See how we were called.
+if [ ! -x $dhcrelay ]; then
+    RETVAL=5
+    exit $RETVAL
+fi
+
+if [ $# -gt 1 ]; then
+    RETVAL=2
+    exit $RETVAL
+fi
+
 case "$1" in
-  start)
-	start
-	;;
-  stop)
-	stop
-	;;
-  restart|reload)
-	stop
-	start
-	RETVAL=$?
-	;;
-  condrestart)
-	if [ -f /var/lock/subsys/dhcrelay ]; then
-	    stop
-	    start
-	    RETVAL=$?
-	fi
-	;;
-  status)
-	status dhcrelay
-	RETVAL=$?
-	;;
-  *)
-	echo $"Usage: $0 {start|stop|restart|condrestart|status}"
-	exit 1
+    start)
+        start
+        RETVAL=$?
+        ;;
+    stop)
+        stop
+        RETVAL=$?
+        ;;
+    restart|force-reload)
+        stop && start
+        RETVAL=$?
+        ;;
+    try-restart|reload)
+        RETVAL=3
+        ;;
+    condrestart)
+        if [ -f $lockfile ]; then
+            stop && start
+            RETVAL=$?
+        fi
+        ;;
+    configtest)
+        configtest
+        RETVAL=$?
+        ;;
+    status)
+        status $prog
+        RETVAL=$?
+        ;;
+    *)
+        echo $"Usage: $0 {start|stop|restart|condrestart|configtest|status}"
+        RETVAL=3
+        ;;
 esac
 
 exit $RETVAL

Legal Notice

Copyright © 2008, 2012 Red Hat, Inc..
This document is licensed by Red Hat under the Creative Commons Attribution-ShareAlike 3.0 Unported License. If you distribute this document, or a modified version of it, you must provide attribution to Red Hat, Inc. and provide a link to the original. If the document is modified, all Red Hat trademarks must be removed.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.
トップに戻る
Red Hat logoGithubredditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。 最新の更新を見る.

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

Theme

© 2025 Red Hat, Inc.