このコンテンツは選択した言語では利用できません。
Chapter 3. Prerequisite Configuration
This document describes a procedure for configuring cluster resources and a cluster service. Before beginning this procedure, you must configure a cluster with a fencing device configured for each node in the cluster. In addition, you must configure a logical volume with a GFS filesystem that can be shared among the nodes in the cluster.
Table 3.1, “Configuration Prerequisities” summarizes the prequisite configuration components that have been set up before this procedure beings.
| Component | Name | Comment |
|---|---|---|
| cluster | nfsclust | five-node cluster |
| cluster node | clusternode1.example.com | node in cluster nfsclust configured with a fencing device of nfs-apc |
| cluster node | clusternode2.example.com | node in cluster nfsclust configured with a fencing device of nfs-apc |
| cluster node | clusternode3.example.com | node in cluster nfsclust configured with a fencing device of nfs-apc |
| cluster node | clusternode4.example.com | node in cluster nfsclust configured with a fencing device of nfs-apc |
| cluster node | clusternode5.example.com | node in cluster nfsclust configured with a fencing device of nfs-apc |
| LVM volume | /dev/myvg/myvol | The LVM device on which the GFS file system is created |
| GFS file system | The GFS file system to export by means of NFS, built on LVM volume /dev/myvg/myvol, mounted at /mnt/gfs, and shared among the members of cluster nfsclust | |
| IP address | 10.15.86.96 | The IP address for the NFS service |
| NFS Client | nfsclient1.example.com | System that will access the NFS service |
| NFS Client | nfsclient2.example.com | System that will access the NFS service |
| NFS Client | nfsclient3.example.com | System that will access the NFS service |
| NFS Client | nfsclient4.example.com | System that will access the NFS service |
| NFS Client | nfsclient5.example.com | System that will access the NFS service |
No failover domain has been defined for this cluster. The cluster software determines on which node to run the NFS service.
For information on configuring a cluster, see Configuring and Managing a Red Hat Cluster. For information on configuring an LVM volume, see LVM Administrator's Guide: Configuration and Administration.
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}