Red Hat Summitこのコンテンツは選択した言語では利用できません。
Apache Karaf Console Reference
Reference for the Apache Karaf shell commands
Abstract
Chapter 1. bundle
1.1. bundle:capabilities
1.1.1. Description
Displays OSGi capabilities of a given bundles.
1.1.2. Syntax
bundle:capabilities [options] [ids]
1.1.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --namespace | |
| --context, -c | Use the given bundle context |
1.2. bundle:classes
1.2.1. Description
Displays a list of classes/resources contained in the bundle
1.2.2. Syntax
bundle:classes [options] [ids]
1.2.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -a, --display-all-files | List all classes and files in the bundle |
| --context, -c | Use the given bundle context |
1.3. bundle:diag
1.3.1. Description
Displays diagnostic information why a bundle is not Active
1.3.2. Syntax
bundle:diag [options] [ids]
1.3.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --context, -c | Use the given bundle context |
1.4. bundle:dynamic-import
1.4.1. Description
Enables/disables dynamic-import for a given bundle.
1.4.2. Syntax
bundle:dynamic-import [options] id
1.4.3. Arguments
| Name | Description |
|---|---|
| id | The bundle ID or name or name/version |
1.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --context | Use the given bundle context |
1.5. bundle:find-class
1.5.1. Description
Locates a specified class in any deployed bundle
1.5.2. Syntax
bundle:find-class [options] className
1.5.3. Arguments
| Name | Description |
|---|---|
| className | Class name or partial class name to be found |
1.5.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
1.6. bundle:headers
1.6.1. Description
Displays OSGi headers of a given bundles.
1.6.2. Syntax
bundle:headers [options] [ids]
1.6.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.6.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-uses | Print or not the Export-Package uses section |
| --indent | Indentation method |
| --context, -c | Use the given bundle context |
1.7. bundle:id
1.7.1. Description
Gets the bundle ID.
1.7.2. Syntax
bundle:id [options] id
1.7.3. Arguments
| Name | Description |
|---|---|
| id | The bundle ID or name or name/version |
1.7.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --context | Use the given bundle context |
1.8. bundle:info
1.8.1. Description
Displays detailed information of a given bundles.
1.8.2. Syntax
bundle:info [options] [ids]
1.8.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.8.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --context, -c | Use the given bundle context |
1.9. bundle:install
1.9.1. Description
Installs one or more bundles.
1.9.2. Syntax
bundle:install [options] urls
1.9.3. Arguments
| Name | Description |
|---|---|
| urls | Bundle URLs separated by whitespaces |
1.9.4. Options
| Name | Description |
|---|---|
| -l, --start-level | Sets the start level of the bundles |
| --help | Display this help message |
| --force, -f | Forces the command to execute |
| --r3-bundles | Allow OSGi R3 bundles |
| -s, --start | Starts the bundles after installation |
1.10. bundle:list
1.10.1. Description
Lists all installed bundles.
1.10.2. Syntax
bundle:list [options] [ids]
1.10.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.10.4. Options
| Name | Description |
|---|---|
| -name, -n | Show bundle name |
| --help | Display this help message |
| -u | Shows the update locations |
| -r | Shows the bundle revisions |
| --no-ellipsis | |
| -l | Show the locations |
| -s | Shows the symbolic name |
| --context, -c | Use the given bundle context |
| -t | Specifies the bundle threshold; bundles with a start-level less than this value will not get printed out. |
| --no-format | Disable table rendered output |
1.11. bundle:load-test
1.11.1. Description
Load test bundle lifecycle
1.11.2. Syntax
bundle:load-test [options]
1.11.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --refresh | percentage of bundle refresh vs restart |
| --excludes | List of bundles (ids or symbolic names) to exclude |
| --iterations | number of iterations per thread |
| --delay | maximum delay between actions |
| --threads | number of concurrent threads |
1.12. bundle:refresh
1.12.1. Description
Refresh bundles.
1.12.2. Syntax
bundle:refresh [options] [ids]
1.12.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.12.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --context, -c | Use the given bundle context |
1.13. bundle:requirements
1.13.1. Description
Displays OSGi requirements of a given bundles.
1.13.2. Syntax
bundle:requirements [options] [ids]
1.13.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.13.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --namespace | |
| --context, -c | Use the given bundle context |
1.14. bundle:resolve
1.14.1. Description
Resolve bundles.
1.14.2. Syntax
bundle:resolve [options] [ids]
1.14.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.14.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --context, -c | Use the given bundle context |
1.15. bundle:restart
1.15.1. Description
Restarts bundles.
1.15.2. Syntax
bundle:restart [options] [ids]
1.15.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.15.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --context, -c | Use the given bundle context |
1.16. bundle:services
1.16.1. Description
Lists OSGi services per Bundle
1.16.2. Syntax
bundle:services [options] [ids]
1.16.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.16.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -p | Shows the properties of the services |
| -u | Shows the services each bundle uses. (By default the provided services are shown) |
| --context, -c | Use the given bundle context |
| -a | Shows all services. (Karaf commands and completers are hidden by default) |
1.17. bundle:start-level
1.17.1. Description
Gets or sets the start level of a bundle.
1.17.2. Syntax
bundle:start-level [options] id [startLevel]
1.17.3. Arguments
| Name | Description |
|---|---|
| id | The bundle ID or name or name/version |
| startLevel | The bundle’s new start level |
1.17.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --context | Use the given bundle context |
1.18. bundle:start
1.18.1. Description
Starts bundles.
1.18.2. Syntax
bundle:start [options] [ids]
1.18.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.18.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -t, --transient | Keep the bundle as auto-start |
| --context, -c | Use the given bundle context |
1.19. bundle:status
1.19.1. Description
Get the bundle current status
1.19.2. Syntax
bundle:status [options] id
1.19.3. Arguments
| Name | Description |
|---|---|
| id | The bundle ID or name or name/version |
1.19.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --context | Use the given bundle context |
1.20. bundle:stop
1.20.1. Description
Stop bundles.
1.20.2. Syntax
bundle:stop [options] [ids]
1.20.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.20.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -t, --transient | Keep the bundle as auto-start |
| --context, -c | Use the given bundle context |
1.21. bundle:tree-show
1.21.1. Description
Shows the tree of bundles based on the wiring information.
1.21.2. Syntax
bundle:tree-show [options] id
1.21.3. Arguments
| Name | Description |
|---|---|
| id | The bundle ID or name or name/version |
1.21.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -v, --version | Show bundle versions |
| --context | Use the given bundle context |
1.22. bundle:uninstall
1.22.1. Description
Uninstall bundles.
1.22.2. Syntax
bundle:uninstall [options] [ids]
1.22.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle (identified by IDs or name or name/version) separated by whitespaces |
1.22.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --context, -c | Use the given bundle context |
1.23. bundle:update
1.23.1. Description
Update bundle.
1.23.2. Syntax
bundle:update [options] id [location]
1.23.3. Arguments
| Name | Description |
|---|---|
| id | The bundle ID or name or name/version |
| location | The bundles update location |
1.23.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --context | Use the given bundle context |
| --raw | Do not update the bundles’s Bundle-UpdateLocation manifest header |
| -r, --refresh | Perform a refresh after the bundle update |
1.24. bundle:watch
1.24.1. Description
Watches and updates bundles
1.24.2. Syntax
bundle:watch [options] [urls]
1.24.3. Arguments
| Name | Description |
|---|---|
| urls | The bundle IDs or URLs |
1.24.4. Options
| Name | Description |
|---|---|
| -i | Watch interval |
| --help | Display this help message |
| --stop | Stops watching all bundles |
| --remove | Removes bundles from the watch list |
| --start | Starts watching the selected bundles |
| --list | Displays the watch list |
1.24.5. Details
Watches the local maven repo for changes in snapshot jars and redploys changed jars
Chapter 2. camel
2.1. camel:component-list
2.1.1. Description
Lists all Camel components that are in use in Karaf.
2.1.2. Syntax
camel:component-list [options] name
2.1.3. Arguments
| Name | Description |
|---|---|
| name | The Camel context name where to look for the components |
2.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --verbose, -v | Verbose output which shows more information |
2.2. camel:context-inflight
2.2.1. Description
List inflight exchanges.
2.2.2. Syntax
camel:context-inflight [options] name [route]
2.2.3. Arguments
| Name | Description |
|---|---|
| name | The Camel context name |
| route | The Camel route ID |
2.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --limit, -l | To limit the number of exchanges shown |
| --sort, -s | true = sort by longest duration, false = sort by exchange id |
2.3. camel:context-info
2.3.1. Description
Display detailed information about a Camel context.
2.3.2. Syntax
camel:context-info [options] name
2.3.3. Arguments
| Name | Description |
|---|---|
| name | The name of the Camel context |
2.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --verbose, -v | Verbose output |
2.4. camel:context-list
2.4.1. Description
Lists all Camel contexts.
2.4.2. Syntax
camel:context-list [options]
2.4.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.5. camel:context-resume
2.5.1. Description
Resumes a Camel context.
2.5.2. Syntax
camel:context-resume [options] context
2.5.3. Arguments
| Name | Description |
|---|---|
| context | The name of the Camel context. |
2.5.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.6. camel:context-start
2.6.1. Description
Start a Camel context.
2.6.2. Syntax
camel:context-start [options] context
2.6.3. Arguments
| Name | Description |
|---|---|
| context | The name of the Camel context. |
2.6.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.7. camel:context-stop
2.7.1. Description
Stop a Camel context. It becomes unavailable and can not be started again.
2.7.2. Syntax
camel:context-stop [options] context
2.7.3. Arguments
| Name | Description |
|---|---|
| context | The name of the Camel context. |
2.7.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.8. camel:context-suspend
2.8.1. Description
Suspends a Camel context.
2.8.2. Syntax
camel:context-suspend [options] context
2.8.3. Arguments
| Name | Description |
|---|---|
| context | The name of the Camel context. |
2.8.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.9. camel:eip-explain
2.9.1. Description
Explain the EIP in the CamelContext
2.9.2. Syntax
camel:eip-explain [options] name nameOrId
2.9.3. Arguments
| Name | Description |
|---|---|
| name | The name of the Camel context |
| nameOrId | The name of the EIP or a node id to refer to a specific node from the routes |
2.9.4. Options
| Name | Description |
|---|---|
| --verbose, -v | Verbose output to explain all options |
| --help | Display this help message |
2.10. camel:endpoint-explain
2.10.1. Description
Explain all Camel endpoints available in the CamelContext
2.10.2. Syntax
camel:endpoint-explain [options] name
2.10.3. Arguments
| Name | Description |
|---|---|
| name | The name of the Camel context |
2.10.4. Options
| Name | Description |
|---|---|
| --verbose, -v | Verbose output to explain all options |
| --help | Display this help message |
| --filter, -f | To filter endpoints by pattern |
2.11. camel:endpoint-list
2.11.1. Description
Lists Camel endpoints
2.11.2. Syntax
camel:endpoint-list [options] [name]
2.11.3. Arguments
| Name | Description |
|---|---|
| name | The name of the Camel context or a wildcard expression |
2.11.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --verbose, -v | Verbose output which does not limit the length of the uri shown, or to explain all options (if explain selected) |
| --explain, -e | Whether to explain the endpoint options |
| --decode, -d | Whether to decode the endpoint uri so its human readable |
2.12. camel:endpoint-stats
2.12.1. Description
Display endpoint runtime statistics
2.12.2. Syntax
camel:endpoint-stats [options] [name]
2.12.3. Arguments
| Name | Description |
|---|---|
| name | The name of the Camel context (support wildcard) |
2.12.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --filter, -f | Filter the list by in,out,static,dynamic |
| --decode, -d | Whether to decode the endpoint uri so its human readable |
2.13. camel:rest-api-doc
2.13.1. Description
List the Camel REST services API documentation (requires camel-swagger-java on classpath)
2.13.2. Syntax
camel:rest-api-doc [options] name
2.13.3. Arguments
| Name | Description |
|---|---|
| name | The Camel context name where to look for the REST services |
2.13.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.14. camel:rest-registry-list
2.14.1. Description
Lists all Camel REST services enlisted in the Rest Registry from a CamelContext
2.14.2. Syntax
camel:rest-registry-list [options] name
2.14.3. Arguments
| Name | Description |
|---|---|
| name | The Camel context name where to look for the REST services |
2.14.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --verbose, -v | Verbose output which does not limit the length of the uri shown |
| --decode, -d | Whether to decode the endpoint uri so its human readable |
2.15. camel:rest-show
2.15.1. Description
Display the Camel REST definition in XML
2.15.2. Syntax
camel:rest-show [options] name
2.15.3. Arguments
| Name | Description |
|---|---|
| name | The name of the Camel context |
2.15.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.16. camel:route-info
2.16.1. Description
Display information about a Camel route.
2.16.2. Syntax
camel:route-info [options] context route
2.16.3. Arguments
| Name | Description |
|---|---|
| context | The Camel context name. |
| route | The Camel route ID or a wildcard expression |
2.16.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.17. camel:route-list
2.17.1. Description
List Camel routes.
2.17.2. Syntax
camel:route-list [options] [name]
2.17.3. Arguments
| Name | Description |
|---|---|
| name | The Camel context name where to look for the route |
2.17.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.18. camel:route-profile
2.18.1. Description
Display profile information about Camel route(s).
2.18.2. Syntax
camel:route-profile [options] context route
2.18.3. Arguments
| Name | Description |
|---|---|
| context | The Camel context name. |
| route | The Camel route ID or a wildcard expression |
2.18.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.19. camel:route-reset-stats
2.19.1. Description
Reset route performance stats from a CamelContext
2.19.2. Syntax
camel:route-reset-stats [options] context
2.19.3. Arguments
| Name | Description |
|---|---|
| context | The name of the Camel context. |
2.19.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.20. camel:route-resume
2.20.1. Description
Resume a Camel route
2.20.2. Syntax
camel:route-resume [options] context route
2.20.3. Arguments
| Name | Description |
|---|---|
| context | The Camel context name. |
| route | The Camel route ID or a wildcard expression |
2.20.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.21. camel:route-show
2.21.1. Description
Display the Camel route definition in XML
2.21.2. Syntax
camel:route-show [options] context route
2.21.3. Arguments
| Name | Description |
|---|---|
| context | The Camel context name. |
| route | The Camel route ID or a wildcard expression |
2.21.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.22. camel:route-start
2.22.1. Description
Start a Camel route
2.22.2. Syntax
camel:route-start [options] context route
2.22.3. Arguments
| Name | Description |
|---|---|
| context | The Camel context name. |
| route | The Camel route ID or a wildcard expression |
2.22.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.23. camel:route-stop
2.23.1. Description
Stop a Camel route
2.23.2. Syntax
camel:route-stop [options] context route
2.23.3. Arguments
| Name | Description |
|---|---|
| context | The Camel context name. |
| route | The Camel route ID or a wildcard expression |
2.23.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
2.24. camel:route-suspend
2.24.1. Description
Suspend a Camel route
2.24.2. Syntax
camel:route-suspend [options] context route
2.24.3. Arguments
| Name | Description |
|---|---|
| context | The Camel context name. |
| route | The Camel route ID or a wildcard expression |
2.24.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
Chapter 3. config
3.1. config:cancel
3.1.1. Description
Cancels the changes to the configuration being edited.
3.1.2. Syntax
config:cancel [options]
3.1.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
3.2. config:delete
3.2.1. Description
Delete a configuration.
3.2.2. Syntax
config:delete [options] pid
3.2.3. Arguments
| Name | Description |
|---|---|
| pid | PID of the configuration |
3.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --force | Force the edition of this config, even if another one was under edition |
3.3. config:edit
3.3.1. Description
Creates or edits a configuration.
3.3.2. Syntax
config:edit [options] pid
3.3.3. Arguments
| Name | Description |
|---|---|
| pid | PID of the configuration or of the factory if --factory is given. Pid can also be specified as ldap query |
3.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --alias | Specifies the alias used for this factory config. |
| --factory | Define this config as a factory config. Will be created on calling update |
| --force | Force the edition of this config, even if another one was under edition |
3.3.5. Details
classpath:edit.txt
3.4. config:install
3.4.1. Description
Install a cfg file in the Karaf etc folder.
3.4.2. Syntax
config:install [options] url finalname
3.4.3. Arguments
| Name | Description |
|---|---|
| url | The URL of the cfg file. |
| finalname | Final name of the cfg file |
3.4.4. Options
| Name | Description |
|---|---|
| -o, --override | Override the target cfg file |
| --help | Display this help message |
3.5. config:list
3.5.1. Description
Lists existing configurations.
3.5.2. Syntax
config:list [options] [query]
3.5.3. Arguments
| Name | Description |
|---|---|
| query | Query in LDAP syntax. Example: "(service.pid=org.apache.karaf.log)" |
3.5.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
3.6. config:meta
3.6.1. Description
Lists meta type information.
3.6.2. Syntax
config:meta [options] pid
3.6.3. Arguments
| Name | Description |
|---|---|
| pid | The configuration pid |
3.6.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -c | Create respective config from metatype defaults |
3.7. config:property-append
3.7.1. Description
Appends the given value to an existing property or creates the property with the specified name and value.
3.7.2. Syntax
config:property-append [options] name value
3.7.3. Arguments
| Name | Description |
|---|---|
| name | The name of the property |
| value | The value to append to the property |
3.7.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -p, --pid | The configuration pid |
3.8. config:property-delete
3.8.1. Description
Deletes a property from the configuration being edited.
3.8.2. Syntax
config:property-delete [options] property
3.8.3. Arguments
| Name | Description |
|---|---|
| property | The name of the property to delete |
3.8.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -p, --pid | The configuration pid |
3.9. config:property-get
3.9.1. Description
Gets the value of a property in the currently edited configuration.
3.9.2. Syntax
config:property-get [options] property
3.9.3. Arguments
| Name | Description |
|---|---|
| property | The name of the property to get value for |
3.9.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --raw | |
| -p, --pid | The configuration pid |
3.10. config:property-list
3.10.1. Description
Lists properties from the currently edited configuration.
3.10.2. Syntax
config:property-list [options]
3.10.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --raw | |
| -p, --pid | The configuration pid |
3.11. config:property-set
3.11.1. Description
Sets a property in the currently edited configuration.
3.11.2. Syntax
config:property-set [options] property value
3.11.3. Arguments
| Name | Description |
|---|---|
| property | The name of the property to set |
| value | The value of the property |
3.11.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -p, --pid | The configuration pid |
3.12. config:update
3.12.1. Description
Saves and propagates changes from the configuration being edited.
3.12.2. Syntax
config:update [options]
3.12.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
Chapter 4. cxf
4.1. cxf:list-busses
4.1.1. Description
Lists all CXF Busses.
4.1.2. Syntax
cxf:list-busses [options]
4.1.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-format | Disable table rendered output |
4.2. cxf:list-endpoints
4.2.1. Description
Lists all CXF Endpoints on a Bus.
4.2.2. Syntax
cxf:list-endpoints [options] [bus]
4.2.3. Arguments
| Name | Description |
|---|---|
| bus | The CXF bus name where to look for the Endpoints |
4.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -f, --fulladdress | Display full address of an endpoint |
| --no-format | Disable table rendered output |
4.3. cxf:start-endpoint
4.3.1. Description
Starts a CXF Endpoint on a Bus.
4.3.2. Syntax
cxf:start-endpoint [options] bus endpoint
4.3.3. Arguments
| Name | Description |
|---|---|
| bus | The CXF bus name where to look for the Endpoint |
| endpoint | The Endpoint name to start |
4.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
4.4. cxf:stop-endpoint
4.4.1. Description
Stops a CXF Endpoint on a Bus.
4.4.2. Syntax
cxf:stop-endpoint [options] bus endpoint
4.4.3. Arguments
| Name | Description |
|---|---|
| bus | The CXF bus name where to look for the Endpoint |
| endpoint | The Endpoint name to stop |
4.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
Chapter 5. dev
5.1. dev:dump-create
5.1.1. Description
Creates zip archive with diagnostic info.
5.1.2. Syntax
dev:dump-create [options] [name]
5.1.3. Arguments
| Name | Description |
|---|---|
| name | Name of created zip or directory |
5.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-heap-dump | Include or not the heap dump in ZIP archive |
| --no-thread-dump | Include or not the thread dump in ZIP archive |
| -d, --directory | Creates dump in a directory in place of a ZIP archive |
Chapter 6. feature
6.1. feature:export-bundles
6.1.1. Description
Export all of the bundles that make up a specified feature to a directory on the file system.
6.1.2. Syntax
feature:export-bundles [options] featureName exportLocation
6.1.3. Arguments
| Name | Description |
|---|---|
| featureName | The name of the feature you want to export bundles for |
| exportLocation | Where you want to export the bundles |
6.1.4. Options
| Name | Description |
|---|---|
| -d, --dependencies-only | This flag indicates that only bundles marked as a dependency will be exported. |
| --help | Display this help message |
| -v, --version | The version of the feature you want to export bundles for. Default is latest |
6.2. feature:info
6.2.1. Description
Shows information about selected feature.
6.2.2. Syntax
feature:info [options] name [version]
6.2.3. Arguments
| Name | Description |
|---|---|
| name | The name of the feature |
| version | The version of the feature |
6.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -d, --dependency | Display dependencies info |
| -b, --bundle | Display bundles info |
| -t, --tree | Display feature tree |
| -c, --configuration | Display configuration info |
| -x, --xml | Display feature xml |
| --conditional | Display conditional info |
| --color | Colorize output (`always', `never' or `auto') |
6.3. feature:install
6.3.1. Description
Installs a feature with the specified name and version.
6.3.2. Syntax
feature:install [options] features
6.3.3. Arguments
| Name | Description |
|---|---|
| features | The name and version of the features to install. A feature id looks like name/version. The version is optional. |
6.3.4. Options
| Name | Description |
|---|---|
| -t, --simulate | Perform a simulation only |
| --features-wiring | Print the wiring between features |
| --help | Display this help message |
| -v, --verbose | Explain what is being done |
| --all-wiring | Print the full wiring |
| --store | Store the resolution into the given file and result for offline analysis |
| -u, --upgrade | Perform an upgrade of feature if previous version are installed or install it |
| -r, --no-auto-refresh | Do not automatically refresh bundles |
| -s, --no-auto-start | Do not start the bundles |
| -m, --no-auto-manage | Do not automatically manage bundles |
| -g, --region | Region to install to |
6.4. feature:list
6.4.1. Description
Lists all existing features available from the defined repositories.
6.4.2. Syntax
feature:list [options]
6.4.3. Options
| Name | Description |
|---|---|
| -i, --installed | Display a list of all installed features only |
| -s, --show-hidden | Display hidden features |
| --help | Display this help message |
| -o, --ordered | Display a list using alphabetical order |
| -b, --show-blacklisted | Display blacklisted features |
| -r, --required | Display a list of all required features only |
| --no-format | Disable table rendered output |
6.5. feature:regions
6.5.1. Description
Prints information about region digraph.
6.5.2. Syntax
feature:regions [options] [regions]
6.5.3. Arguments
| Name | Description |
|---|---|
| regions | Regions to provide detailed info for. |
6.5.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -n, --namespaces | Show namespaces in each filter. |
| -f, --filters | Show filters. |
| -v, --verbose | Show all info. |
| -b, --bundles | Show bundles in each region. |
6.6. feature:refresh
6.6.1. Description
Reloads features processing instructions and reprovisions existing features.
6.6.2. Syntax
feature:refresh [options]
6.6.3. Options
| Name | Description |
|---|---|
| -t, --simulate | Perform a simulation only |
| --features-wiring | Print the wiring between features |
| --help | Display this help message |
| -v, --verbose | Explain what is being done |
| --all-wiring | Print the full wiring |
6.7. feature:repo-add
6.7.1. Description
Add a features repository
6.7.2. Syntax
feature:repo-add [options] name/url [version]
6.7.3. Arguments
| Name | Description |
|---|---|
| name/url | Shortcut name of the features repository or the full URL |
| version | The version of the features repository if using features repository name as first argument. It should be empty if using the URL |
6.7.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -i, --install | Install all features contained in the features repository |
6.8. feature:repo-list
6.8.1. Description
Displays a list of all defined repositories.
6.8.2. Syntax
feature:repo-list [options]
6.8.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -r | Reload all feature urls |
| -b, --show-blacklisted | Also display blacklisted repositories |
| --no-format | Disable table rendered output |
6.9. feature:repo-refresh
6.9.1. Description
Refresh a features repository
6.9.2. Syntax
feature:repo-refresh [options] [repository] [Feature version]
6.9.3. Arguments
| Name | Description |
|---|---|
| repository | Shortcut name of the feature repository or the full URI |
| Feature version | The version of the feature if using the feature name. Should be empty if using the uri |
6.9.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
6.10. feature:repo-remove
6.10.1. Description
Removes the specified repository features service.
6.10.2. Syntax
feature:repo-remove [options] repository [Feature version]
6.10.3. Arguments
| Name | Description |
|---|---|
| repository | Shortcut name of the feature repository or the full URI |
| Feature version | The version of the feature if using the feature name. Should be empty if using the uri |
6.10.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -u, --uninstall-all | Uninstall all features from the repository |
6.11. feature:requirement-add
6.11.1. Description
Add provisioning requirements.
6.11.2. Syntax
feature:requirement-add [options] requirements
6.11.3. Arguments
| Name | Description |
|---|---|
| requirements |
6.11.4. Options
| Name | Description |
|---|---|
| -t, --simulate | Perform a simulation only |
| --features-wiring | Print the wiring between features |
| --help | Display this help message |
| -v, --verbose | Explain what is being done |
| --all-wiring | Print the full wiring |
| --store | Store the resolution into the given file and result for offline analysis |
| -r, --no-auto-refresh | Do not automatically refresh bundles |
| -s, --no-auto-start | Do not start the bundles |
| -m, --no-auto-manage | Do not automatically manage bundles |
| -g, --region | Region to install to |
6.12. feature:requirement-list
6.12.1. Description
List provisioning requirements.
6.12.2. Syntax
feature:requirement-list [options]
6.12.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-format | Disable table rendered output |
6.13. feature:requirement-remove
6.13.1. Description
Remove provisioning requirements.
6.13.2. Syntax
feature:requirement-remove [options] requirements
6.13.3. Arguments
| Name | Description |
|---|---|
| requirements |
6.13.4. Options
| Name | Description |
|---|---|
| -t, --simulate | Perform a simulation only |
| --features-wiring | Print the wiring between features |
| --help | Display this help message |
| -g, --region | Region to apply to |
| -v, --verbose | Explain what is being done |
| --all-wiring | Print the full wiring |
| --store | Store the resolution into the given file and result for offline analysis |
| -r, --no-auto-refresh | Do not automatically refresh bundles |
| -s, --no-auto-start | Do not start the bundles |
| -m, --no-auto-manage | Do not automatically manage bundles |
6.14. feature:start
6.14.1. Description
Start features with the specified name and version.
6.14.2. Syntax
feature:start [options] feature
6.14.3. Arguments
| Name | Description |
|---|---|
| feature | The name and version of the features to start. A feature id looks like name/version. |
6.14.4. Options
| Name | Description |
|---|---|
| -t, --simulate | Perform a simulation only |
| --help | Display this help message |
| -g, --region | Region to apply to |
| -v, --verbose | Explain what is being done |
6.15. feature:stop
6.15.1. Description
Stop features with the specified name and version.
6.15.2. Syntax
feature:stop [options] feature
6.15.3. Arguments
| Name | Description |
|---|---|
| feature | The name and version of the features to stop. A feature id looks like name/version. |
6.15.4. Options
| Name | Description |
|---|---|
| -t, --simulate | Perform a simulation only |
| --help | Display this help message |
| -g, --region | Region to apply to |
| -v, --verbose | Explain what is being done |
6.16. feature:uninstall
6.16.1. Description
Uninstalls a feature with the specified name and version.
6.16.2. Syntax
feature:uninstall [options] features
6.16.3. Arguments
| Name | Description |
|---|---|
| features | The name and version of the features to uninstall. A feature id looks like name/version. The version is optional. |
6.16.4. Options
| Name | Description |
|---|---|
| -t, --simulate | Perform a simulation only |
| --help | Display this help message |
| -v, --verbose | Explain what is being done |
| -r, --no-auto-refresh | Do not automatically refresh bundles |
| -g, --region | Region to install to |
6.17. feature:version-list
6.17.1. Description
Lists all versions of a feature available from the currently available repositories.
6.17.2. Syntax
feature:version-list [options] feature
6.17.3. Arguments
| Name | Description |
|---|---|
| feature | Name of feature. |
6.17.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-format | Disable table rendered output |
Chapter 7. http
7.1. http:list
7.1.1. Description
Lists details for servlets.
7.1.2. Syntax
http:list [options]
7.1.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-format | Disable table rendered output |
7.2. http:proxies
7.2.1. Description
List the HTTP proxies
7.2.2. Syntax
http:proxies [options]
7.2.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
7.3. http:proxy-add
7.3.1. Description
Add a new HTTP proxy
7.3.2. Syntax
http:proxy-add [options] url proxyTo
7.3.3. Arguments
| Name | Description |
|---|---|
| url | HTTP proxy URL |
| proxyTo | HTTP location to proxy on the prefix |
7.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
7.4. http:proxy-remove
7.4.1. Description
Remove an existing HTTP proxy
7.4.2. Syntax
http:proxy-remove [options] prefix
7.4.3. Arguments
| Name | Description |
|---|---|
| prefix | The HTTP proxy prefix |
7.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
Chapter 8. jaas
8.1. jaas:cancel
8.1.1. Description
Cancel the modification of a JAAS realm
8.1.2. Syntax
jaas:cancel [options]
8.1.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.2. jaas:group-add
8.2.1. Description
Make a user part of a group
8.2.2. Syntax
jaas:group-add [options] username group
8.2.3. Arguments
| Name | Description |
|---|---|
| username | Username |
| group | Group |
8.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.3. jaas:group-create
8.3.1. Description
create a group in a realm
8.3.2. Syntax
jaas:group-create [options] group
8.3.3. Arguments
| Name | Description |
|---|---|
| group | Group |
8.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.4. jaas:group-delete
8.4.1. Description
Remove a user from a group
8.4.2. Syntax
jaas:group-delete [options] username group
8.4.3. Arguments
| Name | Description |
|---|---|
| username | Username |
| group | Group |
8.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.5. jaas:group-list
8.5.1. Description
List groups in a realm
8.5.2. Syntax
jaas:group-list [options]
8.5.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.6. jaas:group-role-add
8.6.1. Description
Add a role to a group
8.6.2. Syntax
jaas:group-role-add [options] group role
8.6.3. Arguments
| Name | Description |
|---|---|
| group | Group |
| role | Role |
8.6.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.7. jaas:group-role-delete
8.7.1. Description
Remove a role from a group
8.7.2. Syntax
jaas:group-role-delete [options] group role
8.7.3. Arguments
| Name | Description |
|---|---|
| group | Group |
| role | Role |
8.7.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.8. jaas:pending-list
8.8.1. Description
List the pending modification on the active JAAS Realm/Login Module
8.8.2. Syntax
jaas:pending-list [options]
8.8.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.9. jaas:realm-list
8.9.1. Description
List JAAS realms
8.9.2. Syntax
jaas:realm-list [options]
8.9.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -h, --hidden | Show hidden realms |
| --no-format | Disable table rendered output |
8.10. jaas:realm-manage
8.10.1. Description
Manage users and roles of a JAAS Realm
8.10.2. Syntax
jaas:realm-manage [options]
8.10.3. Options
| Name | Description |
|---|---|
| -h, --hidden | Manage hidden realms |
| --help | Display this help message |
| --realm | JAAS Realm |
| -f, --force | Force the management of this realm, even if another one was under management |
| --index | Realm Index |
| --module | JAAS Login Module Class Name |
8.11. jaas:role-add
8.11.1. Description
Add a role to a user
8.11.2. Syntax
jaas:role-add [options] username role
8.11.3. Arguments
| Name | Description |
|---|---|
| username | User Name |
| role | Role |
8.11.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.12. jaas:role-delete
8.12.1. Description
Delete a role from a user
8.12.2. Syntax
jaas:role-delete [options] username role
8.12.3. Arguments
| Name | Description |
|---|---|
| username | User Name |
| role | Role |
8.12.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.13. jaas:su
8.13.1. Description
Substitute user identity
8.13.2. Syntax
jaas:su [options] [user]
8.13.3. Arguments
| Name | Description |
|---|---|
| user | Name of the user to substitute (defaults to karaf) |
8.13.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --realm |
8.14. jaas:sudo
8.14.1. Description
Execute a command as another user
8.14.2. Syntax
jaas:sudo [options] [command]
8.14.3. Arguments
| Name | Description |
|---|---|
| command |
8.14.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --realm | |
| --user |
8.15. jaas:update
8.15.1. Description
Apply pending modification on the edited JAAS Realm
8.15.2. Syntax
jaas:update [options]
8.15.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.16. jaas:user-add
8.16.1. Description
Add a user
8.16.2. Syntax
jaas:user-add [options] username password
8.16.3. Arguments
| Name | Description |
|---|---|
| username | User Name |
| password | Password |
8.16.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.17. jaas:user-delete
8.17.1. Description
Delete a user
8.17.2. Syntax
jaas:user-delete [options] username
8.17.3. Arguments
| Name | Description |
|---|---|
| username | User Name |
8.17.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
8.18. jaas:user-list
8.18.1. Description
List the users of the selected JAAS realm/login module
8.18.2. Syntax
jaas:user-list [options]
8.18.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-format | Disable table rendered output |
8.19. jaas:whoami
8.19.1. Description
List currently active principals according to JAAS.
8.19.2. Syntax
jaas:whoami [options]
8.19.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-format | Disable table rendered output. |
| -g, --groups | Show groups instead of user. |
| -a, --all | Show all JAAS principals regardless of type. |
| -r, --roles | Show roles instead of user. |
Chapter 9. jdbc
9.1. jdbc:ds-create
9.1.1. Description
Create a JDBC datasource config for pax-jdbc-config from a DataSourceFactory
9.1.2. Syntax
jdbc:ds-create [options] name
9.1.3. Arguments
| Name | Description |
|---|---|
| name | The JDBC datasource name |
9.1.4. Options
| Name | Description |
|---|---|
| -p, --password | The database password |
| --help | Display this help message |
| -dt, --databaseType | The database type (ConnectionPoolDataSource, XADataSource or DataSource) |
| -dbName | Database name to use |
| -dn, --driverName | org.osgi.driver.name property of the DataSourceFactory |
| -url | The JDBC URL to use |
| -dc, --driverClass | org.osgi.driver.class property of the DataSourceFactory |
| -u, --username | The database username |
9.2. jdbc:ds-delete
9.2.1. Description
Delete a JDBC datasource
9.2.2. Syntax
jdbc:ds-delete [options] name
9.2.3. Arguments
| Name | Description |
|---|---|
| name | The JDBC datasource name (the one used at creation time) |
9.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
9.3. jdbc:ds-factories
9.3.1. Description
List the JDBC DataSourceFactories
9.3.2. Syntax
jdbc:ds-factories [options]
9.3.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
9.4. jdbc:ds-info
9.4.1. Description
Display details about a JDBC datasource
9.4.2. Syntax
jdbc:ds-info [options] datasource
9.4.3. Arguments
| Name | Description |
|---|---|
| datasource | The JDBC datasource name |
9.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
9.5. jdbc:ds-list
9.5.1. Description
List the JDBC datasources
9.5.2. Syntax
jdbc:ds-list [options]
9.5.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
9.6. jdbc:execute
9.6.1. Description
Execute a SQL command on a given JDBC datasource
9.6.2. Syntax
jdbc:execute [options] datasource command
9.6.3. Arguments
| Name | Description |
|---|---|
| datasource | The JDBC datasource |
| command | The SQL command to execute |
9.6.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
9.7. jdbc:query
9.7.1. Description
Execute a SQL query on a JDBC datasource
9.7.2. Syntax
jdbc:query [options] datasource query
9.7.3. Arguments
| Name | Description |
|---|---|
| datasource | The JDBC datasource to use |
| query | The SQL query to execute |
9.7.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
9.8. jdbc:tables
9.8.1. Description
List the tables on a given JDBC datasource
9.8.2. Syntax
jdbc:tables [options] datasource
9.8.3. Arguments
| Name | Description |
|---|---|
| datasource | The JDBC datasource to use |
9.8.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
Chapter 10. jms
10.1. jms:browse
10.1.1. Description
Browse a JMS queue
10.1.2. Syntax
jms:browse [options] connectionFactory queue
10.1.3. Arguments
| Name | Description |
|---|---|
| connectionFactory | The JMS connection factory name |
| queue | The JMS queue to browse |
10.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -v, --verbose | Display JMS properties |
| -s, --selector | The selector to select the messages to browse |
| -p, --password | Password to connect to the JMS broker |
| -u, --username | Username to connect to the JMS broker |
10.2. jms:connectionfactories
10.2.1. Description
List the JMS connection factories
10.2.2. Syntax
jms:connectionfactories [options]
10.2.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
10.3. jms:consume
10.3.1. Description
Consume messages from a JMS queue.
10.3.2. Syntax
jms:consume [options] connectionFactory queue
10.3.3. Arguments
| Name | Description |
|---|---|
| connectionFactory | The JMS connection factory name |
| queue | The JMS queue where to consume messages |
10.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -s, --selector | The selector to use to select the messages to consume |
| -p, --password | Password to connect to the JMS broker |
| -u, --username | Username to connect to the JMS broker |
10.4. jms:count
10.4.1. Description
Count the number of messages on a JMS queue.
10.4.2. Syntax
jms:count [options] connectionFactory queue
10.4.3. Arguments
| Name | Description |
|---|---|
| connectionFactory | The JMS connection factory name |
| queue | The JMS queue name |
10.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -p, --password | Password to connect to the JMS broker |
| -u, --username | Username to connect to the JMS broker |
10.5. jms:create
10.5.1. Description
Create a JMS connection factory.
10.5.2. Syntax
jms:create [options] name
10.5.3. Arguments
| Name | Description |
|---|---|
| name | The JMS connection factory name |
10.5.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -t, --type | The JMS connection factory type (ActiveMQ, Artemis or WebsphereMQ) |
| --url | URL of the JMS broker. For WebsphereMQ type, the URL is hostname/port/queuemanager/channel |
| -p, --password | Password to connect to the JMS broker |
| -u, --username | Username to connect to the JMS broker |
10.6. jms:delete
10.6.1. Description
Delete a JMS connection factory
10.6.2. Syntax
jms:delete [options] name
10.6.3. Arguments
| Name | Description |
|---|---|
| name | The JMS connection factory name |
10.6.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
10.7. jms:info
10.7.1. Description
Provides details about a JMS connection factory.
10.7.2. Syntax
jms:info [options] connectionFactory
10.7.3. Arguments
| Name | Description |
|---|---|
| connectionFactory | The JMS connection factory name |
10.7.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -p, --password | Password to connect to the JMS broker |
| -u, --username | Username to connect to the JMS broker |
10.8. jms:move
10.8.1. Description
Move messages from one JMS queue to another one.
10.8.2. Syntax
jms:move [options] connectionFactory source destination
10.8.3. Arguments
| Name | Description |
|---|---|
| connectionFactory | The JMS connection factory name |
| source | The source JMS queue |
| destination | The destination JMS queue |
10.8.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -s, --selector | Selector to move only some messages |
| -p, --password | Password to connect to the JMS broker |
| -u, --username | Username to connect to the JMS broker |
10.9. jms:queues
10.9.1. Description
List the JMS queues.
10.9.2. Syntax
jms:queues [options] connectionFactory
10.9.3. Arguments
| Name | Description |
|---|---|
| connectionFactory | The JMS connection factory name |
10.9.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -p, --password | Password to connect to the JMS broker |
| -u, --username | Username to connect to the JMS broker |
10.10. jms:send
10.10.1. Description
Send a message to
10.10.2. Syntax
jms:send [options] connectionFactory queue message
10.10.3. Arguments
| Name | Description |
|---|---|
| connectionFactory | The JMS connection factory name |
| queue | The JMS queue name |
| message | The JMS message content |
10.10.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -r, --replyTo | Set the message ReplyTo |
| -p, --password | Password to connect to the JMS broker |
| -u, --username | Username to connect to the JMS broker |
10.11. jms:topics
10.11.1. Description
List the JMS topics.
10.11.2. Syntax
jms:topics [options] connectionFactory
10.11.3. Arguments
| Name | Description |
|---|---|
| connectionFactory | The JMS connection factory name |
10.11.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -p, --password | Password to connect to the JMS broker |
| -u, --username | Username to connect to the JMS broker |
Chapter 11. jndi
11.1. jndi:alias
11.1.1. Description
Create a JNDI alias on a given name.
11.1.2. Syntax
jndi:alias [options] name alias
11.1.3. Arguments
| Name | Description |
|---|---|
| name | The JNDI name |
| alias | The JNDI alias |
11.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
11.2. jndi:bind
11.2.1. Description
Bind an OSGi service in the JNDI context
11.2.2. Syntax
jndi:bind [options] service name
11.2.3. Arguments
| Name | Description |
|---|---|
| service | The ID of the OSGi service to bind |
| name | The JNDI name to bind the OSGi service |
11.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
11.3. jndi:contexts
11.3.1. Description
List the JNDI sub-contexts.
11.3.2. Syntax
jndi:contexts [options] [context]
11.3.3. Arguments
| Name | Description |
|---|---|
| context | The base JNDI context |
11.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
11.4. jndi:create
11.4.1. Description
Create a new JNDI sub-context.
11.4.2. Syntax
jndi:create [options] context
11.4.3. Arguments
| Name | Description |
|---|---|
| context | The JNDI sub-context name |
11.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
11.5. jndi:delete
11.5.1. Description
Delete a JNDI sub-context.
11.5.2. Syntax
jndi:delete [options] context
11.5.3. Arguments
| Name | Description |
|---|---|
| context | The JNDI sub-context name |
11.5.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
11.6. jndi:names
11.6.1. Description
List the JNDI names.
11.6.2. Syntax
jndi:names [options] [context]
11.6.3. Arguments
| Name | Description |
|---|---|
| context | The JNDI context to display the names |
11.6.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
11.7. jndi:unbind
11.7.1. Description
Unbind a JNDI name.
11.7.2. Syntax
jndi:unbind [options] name
11.7.3. Arguments
| Name | Description |
|---|---|
| name | The JNDI name to unbind |
11.7.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
Chapter 12. kar
12.1. kar:create
12.1.1. Description
Create a kar file for a list of feature repos
12.1.2. Syntax
kar:create [options] repoName [features]
12.1.3. Arguments
| Name | Description |
|---|---|
| repoName | Repository name. The kar will contain all features of the named repository by default |
| features | Names of the features to include. If set then only these features will be added |
12.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
12.2. kar:install
12.2.1. Description
Installs a KAR file.
12.2.2. Syntax
kar:install [options] url
12.2.3. Arguments
| Name | Description |
|---|---|
| url | The URL of the KAR file to install. |
12.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-start | Do not start the bundles automatically |
12.3. kar:list
12.3.1. Description
List the installed KAR files.
12.3.2. Syntax
kar:list [options]
12.3.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-format | Disable table rendered output |
12.4. kar:uninstall
12.4.1. Description
Uninstall a KAR file.
12.4.2. Syntax
kar:uninstall [options] name
12.4.3. Arguments
| Name | Description |
|---|---|
| name | The name of the KAR file to uninstall. |
12.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
Chapter 13. log
13.1. log:clear
13.1.1. Description
Clear log entries.
13.1.2. Syntax
log:clear [options]
13.1.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
13.2. log:display
13.2.1. Description
Displays log entries.
13.2.2. Syntax
log:display [options] [logger]
13.2.3. Arguments
| Name | Description |
|---|---|
| logger | The name of the logger. This can be ROOT, ALL, or the name of a logger specified in the org.ops4j.pax.logger.cfg file. |
13.2.4. Options
| Name | Description |
|---|---|
| -p | Pattern for formatting the output |
| --help | Display this help message |
| --no-color | Disable syntax coloring of log events |
| -n | Number of entries to display |
| -l, --level | The minimal log level to display |
13.3. log:exception-display
13.3.1. Description
Displays the last occurred exception from the log.
13.3.2. Syntax
log:exception-display [options] [logger]
13.3.3. Arguments
| Name | Description |
|---|---|
| logger | The name of the logger. This can be ROOT, ALL, or the name of a logger specified in the org.ops4j.pax.logger.cfg file. |
13.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
13.4. log:get
13.4.1. Description
Shows the currently set log level.
13.4.2. Syntax
log:get [options] [logger]
13.4.3. Arguments
| Name | Description |
|---|---|
| logger | The name of the logger or ALL (default) |
13.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-format | Disable table rendered output |
13.5. log:load-test
13.5.1. Description
Load test log.
13.5.2. Syntax
log:load-test [options]
13.5.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --messaged | |
| --threads |
13.6. log:log
13.6.1. Description
Log a message.
13.6.2. Syntax
log:log [options] message
13.6.3. Arguments
| Name | Description |
|---|---|
| message | The message to log |
13.6.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --level, -l | The level the message will be logged at |
13.7. log:set
13.7.1. Description
Sets the log level.
13.7.2. Syntax
log:set [options] level [logger]
13.7.3. Arguments
| Name | Description |
|---|---|
| level | The log level to set (TRACE, DEBUG, INFO, WARN, ERROR) or DEFAULT to unset |
| logger | Logger name or ROOT (default) |
13.7.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
13.8. log:tail
13.8.1. Description
Continuously display log entries. Use ctrl-c to quit this command
13.8.2. Syntax
log:tail [options] [logger]
13.8.3. Arguments
| Name | Description |
|---|---|
| logger | The name of the logger. This can be ROOT, ALL, or the name of a logger specified in the org.ops4j.pax.logger.cfg file. |
13.8.4. Options
| Name | Description |
|---|---|
| -p | Pattern for formatting the output |
| --help | Display this help message |
| --no-color | Disable syntax coloring of log events |
| -n | Number of entries to display |
| -l, --level | The minimal log level to display |
Chapter 14. maven
14.1. maven:http-proxy-list
14.1.1. Description
Lists HTTP proxy configurations for Maven remote repositories
14.1.2. Syntax
maven:http-proxy-list [options]
14.1.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -x, --show-passwords | Do not hide passwords related to Maven encryption |
14.2. maven:http-proxy
14.2.1. Description
Manage HTTP proxy configuration for Maven remote repositories
14.2.2. Syntax
maven:http-proxy [options] [hostPort]
14.2.3. Arguments
| Name | Description |
|---|---|
| hostPort | host:port of HTTP proxy |
14.2.4. Options
| Name | Description |
|---|---|
| -p, --password | Password for remote repository (may be encrypted, see "maven:password -ep") |
| --help | Display this help message |
| -f, --force | Do not ask for confirmation |
| -id | Identifier of HTTP proxy |
| --change | Changes HTTP proxy configuration in Maven settings |
| -n, --non-proxy-hosts | Non-proxied hosts (in the format '192.168.* |
| localhost | …') |
| --remove | Removes HTTP proxy configuration from Maven settings |
| --add | Adds HTTP proxy configuration to Maven settings |
| -u, --username | Username for remote repository |
| -x, --show-passwords | Do not hide passwords related to Maven encryption |
14.3. maven:password
14.3.1. Description
Manage passwords for remote repositories and proxies
14.3.2. Syntax
maven:password [options]
14.3.3. Options
| Name | Description |
|---|---|
| -emp, --encrypt-master-password | Encrypts master password used to encrypt/decrypt other passwords, see "mvn -emp" |
| --help | Display this help message |
| -ep, --encrypt-password | Encrypts passwords to use for remote repositories and proxies, see "mvn -ep" |
| -p, --persist |
14.4. maven:repository-add
14.4.1. Description
Adds Maven repository
14.4.2. Syntax
maven:repository-add [options] [uri]
14.4.3. Arguments
| Name | Description |
|---|---|
| uri | Repository URI. It may be file:// based, http(s):// based, may use other known protocol or even property placeholders (like ${karaf.base}) |
14.4.4. Options
| Name | Description |
|---|---|
| -nr, --no-releases | Disable release handling in this repository |
| -p, --password | Password for remote repository (may be encrypted, see "maven:password -ep") |
| --help | Display this help message |
| -f, --force | Do not ask for confirmation |
| -id | Identifier of repository |
| -idx | Index at which new repository is to be inserted (0-based) (defaults to last - repository will be appended) |
| -d, --default | Edit default repository instead of remote one |
| -s, --snapshots | Enable SNAPSHOT handling in the repository |
| -cp, --checksum-policy | Checksum policy for repository (ignore, warn (default), fail) |
| -u, --username | Username for remote repository |
| -x, --show-passwords | Do not hide passwords related to Maven encryption |
| -up, --update-policy | Update policy for repository (never, daily (default), interval:N, always) |
14.5. maven:repository-change
14.5.1. Description
Changes configuration of Maven repository
14.5.2. Syntax
maven:repository-change [options] [uri]
14.5.3. Arguments
| Name | Description |
|---|---|
| uri | Repository URI. It may be file:// based, http(s):// based, may use other known protocol or even property placeholders (like ${karaf.base}) |
14.5.4. Options
| Name | Description |
|---|---|
| -nr, --no-releases | Disable release handling in this repository |
| -p, --password | Password for remote repository (may be encrypted, see "maven:password -ep") |
| --help | Display this help message |
| -f, --force | Do not ask for confirmation |
| -id | Identifier of repository |
| -d, --default | Edit default repository instead of remote one |
| -s, --snapshots | Enable SNAPSHOT handling in the repository |
| -cp, --checksum-policy | Checksum policy for repository (ignore, warn (default), fail) |
| -u, --username | Username for remote repository |
| -x, --show-passwords | Do not hide passwords related to Maven encryption |
| -up, --update-policy | Update policy for repository (never, daily (default), interval:N, always) |
14.6. maven:repository-list
14.6.1. Description
Maven repository summary.
14.6.2. Syntax
maven:repository-list [options]
14.6.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -v, --verbose | Show additional information (policies, source) |
| -x, --show-passwords | Do not hide passwords related to Maven encryption |
14.7. maven:repository-remove
14.7.1. Description
Removes Maven repository
14.7.2. Syntax
maven:repository-remove [options]
14.7.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -f, --force | Do not ask for confirmation |
| -id | Identifier of repository |
| -d, --default | Edit default repository instead of remote one |
| -x, --show-passwords | Do not hide passwords related to Maven encryption |
14.8. maven:summary
14.8.1. Description
Maven configuration summary.
14.8.2. Syntax
maven:summary [options]
14.8.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -p, --property-ids | Use PID property identifiers instead of their names |
| -s, --source | Adds information about where the value is configured |
| -d, --description | Adds description of Maven configuration options |
| -x, --show-passwords | Do not hide passwords related to Maven encryption |
Chapter 15. obr
15.1. obr:deploy
15.1.1. Description
Deploys a list of bundles using OBR service.
15.1.2. Syntax
obr:deploy [options] bundles
15.1.3. Arguments
| Name | Description |
|---|---|
| bundles | List of bundle names to deploy (separated by whitespaces). The bundles are identified using the following syntax: symbolic_name,version where version is optional. |
15.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -d, --deployOptional | Deploy optional bundles |
| -s, --start | Start the deployed bundles |
15.2. obr:find
15.2.1. Description
Find OBR bundles for a given filter.
15.2.2. Syntax
obr:find [options] requirements
15.2.3. Arguments
| Name | Description |
|---|---|
| requirements | Requirement |
15.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
15.3. obr:info
15.3.1. Description
Prints information about OBR bundles.
15.3.2. Syntax
obr:info [options] bundles
15.3.3. Arguments
| Name | Description |
|---|---|
| bundles | Specify bundles to query for information (separated by whitespaces). The bundles are identified using the following syntax: symbolic_name,version where version is optional. |
15.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
15.4. obr:list
15.4.1. Description
Lists OBR bundles, optionally providing the given packages.
15.4.2. Syntax
obr:list [options] [packages]
15.4.3. Arguments
| Name | Description |
|---|---|
| packages | A list of packages separated by whitespaces. |
15.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-format | Disable table rendered output |
15.5. obr:resolve
15.5.1. Description
Shows the resolution output for a given set of requirements.
15.5.2. Syntax
obr:resolve [options] requirements
15.5.3. Arguments
| Name | Description |
|---|---|
| requirements | Requirements |
15.5.4. Options
| Name | Description |
|---|---|
| -w, --why | Display the reason of the inclusion of the resource |
| --help | Display this help message |
| --no-remote | Ignore remote resources during resolution |
| -l, --no-local | Ignore local resources during resolution |
| --deploy | Deploy the selected bundles |
| --optional | Resolve optional dependencies |
| --start | Deploy and start the selected bundles |
15.6. obr:source
15.6.1. Description
Downloads the sources for an OBR bundle.
15.6.2. Syntax
obr:source [options] folder bundles
15.6.3. Arguments
| Name | Description |
|---|---|
| folder | Local folder for storing sources |
| bundles | List of bundles to download the sources for. The bundles are identified using the following syntax: symbolic_name,version where version is optional. |
15.6.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -x | Extract the archive |
15.7. obr:start
15.7.1. Description
Deploys and starts a list of bundles using OBR.
15.7.2. Syntax
obr:start [options] bundles
15.7.3. Arguments
| Name | Description |
|---|---|
| bundles | List of bundles to deploy (separated by whitespaces). The bundles are identified using the following syntax: symbolic_name,version where version is optional. |
15.7.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -d, --deployOptional | Deploy optional bundles |
15.8. obr:url-add
15.8.1. Description
Adds a list of repository URLs to the OBR service.
15.8.2. Syntax
obr:url-add [options] urls
15.8.3. Arguments
| Name | Description |
|---|---|
| urls | Repository URLs to add to the OBR service separated by whitespaces |
15.8.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
15.9. obr:url-list
15.9.1. Description
Displays the repository URLs currently associated with the OBR service.
15.9.2. Syntax
obr:url-list [options]
15.9.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-format | Disable table rendered output |
15.10. obr:url-refresh
15.10.1. Description
Reloads the repositories to obtain a fresh list of bundles.
15.10.2. Syntax
obr:url-refresh [options] [ids]
15.10.3. Arguments
| Name | Description |
|---|---|
| ids | Repository URLs (or indexes if you use -i) to refresh (leave empty for all) |
15.10.4. Options
| Name | Description |
|---|---|
| -i, --index | Use index to identify URL |
| --help | Display this help message |
15.11. obr:url-remove
15.11.1. Description
Removes a list of repository URLs from the OBR service.
15.11.2. Syntax
obr:url-remove [options] ids
15.11.3. Arguments
| Name | Description |
|---|---|
| ids | Repository URLs (or indexes if you use -i) to remove from OBR service |
15.11.4. Options
| Name | Description |
|---|---|
| -i, --index | Use index to identify URL |
| --help | Display this help message |
Chapter 16. package
16.1. package:exports
16.1.1. Description
Lists exported packages and the bundles that export them
16.1.2. Syntax
package:exports [options]
16.1.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -b | Only show packages exported by given bundle id |
| -d | Only show packages that are exported by more than one bundle |
| --show-name-only | Show only package name |
| -p | Only show package starting with given name |
| --no-format | Disable table rendered output |
16.2. package:imports
16.2.1. Description
Lists imported packages and the bundles that import them
16.2.2. Syntax
package:imports [options]
16.2.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -b | Only show imports of the given bundle id |
| --show-name-only | Show only package name |
| --filter | Only show package instead of full filter |
| -p | Only show package starting with given name |
| --no-format | Disable table rendered output |
Chapter 17. profile
17.1. profile:change-parents
17.1.1. Description
Replace the profile’s parents with the specified list of parents
17.1.2. Syntax
profile:change-parents [options] profile parents
17.1.3. Arguments
| Name | Description |
|---|---|
| profile | Name of the profile. |
| parents | The list of new parent profiles. |
17.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
17.2. profile:copy
17.2.1. Description
Copies the specified source profile
17.2.2. Syntax
profile:copy [options] source profile target profile
17.2.3. Arguments
| Name | Description |
|---|---|
| source profile | Name of the source profile. |
| target profile | Name of the target profile. |
17.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -f, --force | Flag to allow overwriting the target profile (if exists). |
17.3. profile:create
17.3.1. Description
Create a new profile with the specified name and parents
17.3.2. Syntax
profile:create [options] [profileId]
17.3.3. Arguments
| Name | Description |
|---|---|
| profileId |
17.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --parents | Optionally specifies one or multiple parent profiles. To specify multiple parent profiles, specify this flag multiple times on the command line. For example, --parents foo --parents bar. |
17.3.5. Details
classpath:profileCreate.txt
17.4. profile:delete
17.4.1. Description
Delete the specified profile
17.4.2. Syntax
profile:delete [options] profile
17.4.3. Arguments
| Name | Description |
|---|---|
| profile | Name of the profile to delete. |
17.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
17.5. profile:display
17.5.1. Description
Displays information about the specified profile
17.5.2. Syntax
profile:display [options] profile
17.5.3. Arguments
| Name | Description |
|---|---|
| profile | The name of the profile. |
17.5.4. Options
| Name | Description |
|---|---|
| --overlay, -o | Shows the overlay profile settings, taking into account the settings inherited from parent profiles. |
| --help | Display this help message |
| --effective, -e | Shows the effective profile settings, taking into account properties substitution. |
| --display-resources, -r | Displays the content of additional profile resources. |
17.6. profile:edit
17.6.1. Description
Edits the specified profile
17.6.2. Syntax
profile:edit [options] profile
17.6.3. Arguments
| Name | Description |
|---|---|
| profile | The target profile to edit |
17.6.4. Options
| Name | Description |
|---|---|
| --remove | Removes value from a delimited list. It is only usable with the system, config & pid options |
| --help | Display this help message |
| --delete | Delete values. This option can be used to delete a feature, a bundle or a pid from the profile. |
| --append | Append value to a delimited list. It is only usable with the system, config & pid options |
| -c, --config | Edit the Java system properties that affect the karaf container (analogous to editing etc/config.properties in a root container). |
| --delimiter | Specifies the delimiter to use for appends and removals. |
| -x, --extension | Edit extension libraries. To specify multiple libraries, specify this flag multiple times. |
| -p, --pid | Edit an OSGi configuration property, specified in the format <PID>/<Property>. To specify multiple properties, specify this flag multiple times. |
| --resource | Selects a resource under the profile to edit. This option should only be used alone. |
| --set | Set or create values (selected by default). |
| -i, --import-pid | Imports the pids that are edited, from local OSGi config admin |
| -f, --features | Edit features. To specify multiple features, specify this flag multiple times. For example, --features foo --features bar. |
| -r, --repositories | Edit the features repositories. To specify multiple repositories, specify this flag multiple times. |
| -o, --overrides | Edit overrides. To specify multiple libraries, specify this flag multiple times. |
| -s, --system | Edit the Java system properties that affect installed bundles (analogous to editing etc/system.properties in a root container). |
| -b, --bundles | Edit bundles. To specify multiple bundles, specify this flag multiple times. |
| -n, --endorsed | Edit endorsed libraries. To specify multiple libraries, specify this flag multiple times. |
| -l, --libs | Edit libraries. To specify multiple libraries, specify this flag multiple times. |
17.6.5. Details
classpath:profileEdit.txt
17.7. profile:list
17.7.1. Description
Lists all profiles
17.7.2. Syntax
profile:list [options]
17.7.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --hidden | Display hidden profiles |
17.8. profile:rename
17.8.1. Description
Rename the specified source profile
17.8.2. Syntax
profile:rename [options] profile name new profile name
17.8.3. Arguments
| Name | Description |
|---|---|
| profile name | Name of the profile. |
| new profile name | New name of the profile. |
17.8.4. Options
| Name | Description |
|---|---|
| -f, --force | Flag to allow replacing the target profile (if exists). |
| --help | Display this help message |
| --version | The profile version to rename. Defaults to the current default version. |
Chapter 18. scheduler
18.1. scheduler:list
18.1.1. Description
List scheduled jobs
18.1.2. Syntax
scheduler:list [options]
18.1.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
18.2. scheduler:reschedule
18.2.1. Description
Update scheduling of an existing job
18.2.2. Syntax
scheduler:reschedule [options] name
18.2.3. Arguments
| Name | Description |
|---|---|
| name | The job name |
18.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --period | Time during executions (in seconds) |
| --at | Absolute date in ISO format (ex: 2014-05-13T13:56:45) |
| --times | Number of times this job should be executed |
| --concurrent | Should jobs run concurrently or not (defaults to false) |
| --cron | The cron expression |
18.3. scheduler:schedule
18.3.1. Description
Schedule a script execution
18.3.2. Syntax
scheduler:schedule [options] script
18.3.3. Arguments
| Name | Description |
|---|---|
| script | The script to schedule |
18.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --period | Time during executions (in seconds) |
| --at | Absolute date in ISO format (ex: 2014-05-13T13:56:45) |
| --times | Number of times this job should be executed |
| --name | Name of this job |
| --concurrent | Should jobs run concurrently or not (defaults to false) |
| --cron | The cron expression |
18.4. scheduler:trigger
18.4.1. Description
Manually trigger a scheduled job
18.4.2. Syntax
scheduler:trigger [options] name
18.4.3. Arguments
| Name | Description |
|---|---|
| name | Name of the job to trigger |
18.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -b, background | schedule the trigger in the background |
18.5. scheduler:unschedule
18.5.1. Description
Unschedule a job
18.5.2. Syntax
scheduler:unschedule [options] [name]
18.5.3. Arguments
| Name | Description |
|---|---|
| name |
18.5.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
Chapter 19. scr
19.1. scr:activate
19.1.1. Description
Activates a Component for the given name
19.1.2. Syntax
scr:activate [options] name
19.1.3. Arguments
| Name | Description |
|---|---|
| name | The name of the Component to activate |
19.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -s, --show-hidden | Show all Components including the System Components (hidden by default) |
19.2. scr:components
19.2.1. Description
Display available components
19.2.2. Syntax
scr:components [options]
19.2.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -s, --show-hidden | Show all Components including the System Components (hidden by default) |
19.3. scr:deactivate
19.3.1. Description
Deactivates a Component for the given name
19.3.2. Syntax
scr:deactivate [options] name
19.3.3. Arguments
| Name | Description |
|---|---|
| name | The name of the Component to deactivate |
19.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -s, --show-hidden | Show all Components including the System Components (hidden by default) |
19.4. scr:details
19.4.1. Description
Display available components
19.4.2. Syntax
scr:details [options] name
19.4.3. Arguments
| Name | Description |
|---|---|
| name | The component name |
19.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -s, --show-hidden | Show all Components including the System Components (hidden by default) |
Chapter 20. service
20.1. service:list
20.1.1. Description
Lists OSGi services.
20.1.2. Syntax
service:list [options] [objectClass]
20.1.3. Arguments
| Name | Description |
|---|---|
| objectClass | Name of service objectClass to filter for |
20.1.4. Options
| Name | Description |
|---|---|
| -a | Shows all services. (By default Karaf commands are hidden) |
| --help | Display this help message |
| -n | Shows only service class names |
20.2. service:wait
20.2.1. Description
Wait for a given OSGi service.
20.2.2. Syntax
service:wait [options] service
20.2.3. Arguments
| Name | Description |
|---|---|
| service | The service class or filter |
20.2.4. Options
| Name | Description |
|---|---|
| -t, --timeout | timeout to wait for the service (in milliseconds, negative to not wait at all, zero to wait forever) |
| --help | Display this help message |
| -e, --exception | throw an exception if the service is not found after the timeout |
Chapter 21. shell
21.1. shell:completion
21.1.1. Description
Display or change the completion mode on the current console session.
21.1.2. Syntax
shell:completion [options] [mode]
21.1.3. Arguments
| Name | Description |
|---|---|
| mode | The completion mode to set. The valid completion modes are: global, first, subshell. |
21.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
21.2. shell:exec
21.2.1. Description
Executes system processes.
21.2.2. Syntax
shell:exec [options] command
21.2.3. Arguments
| Name | Description |
|---|---|
| command | Execution command with arguments |
21.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
21.3. shell:info
21.3.1. Description
Prints system information.
21.3.2. Syntax
shell:info [options]
21.3.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --memory-pools, -mp | Includes detailed information about memory pools |
21.4. shell:java
21.4.1. Description
Executes a Java standard application.
21.4.2. Syntax
shell:java [options] className [arguments]
21.4.3. Arguments
| Name | Description |
|---|---|
| className | The name of the class to invoke |
| arguments | Arguments to pass to the method of the given class |
21.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -m, --method | Invoke a named method |
21.5. shell:logout
21.5.1. Description
Disconnects shell from current session.
21.5.2. Syntax
shell:logout [options]
21.5.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
21.6. shell:printf
21.6.1. Description
Formats and prints arguments.
21.6.2. Syntax
shell:printf [options] format arguments
21.6.3. Arguments
| Name | Description |
|---|---|
| format | The format pattern to use |
| arguments | The arguments for the given format pattern |
21.6.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
21.7. shell:source
21.7.1. Description
Run a script
21.7.2. Syntax
shell:source [options] script [args]
21.7.3. Arguments
| Name | Description |
|---|---|
| script | A URI pointing to the script |
| args | Arguments for the script |
21.7.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
21.8. shell:stack-traces-print
21.8.1. Description
Prints the full stack trace in the console when the execution of a command throws an exception.
21.8.2. Syntax
shell:stack-traces-print [options] [print]
21.8.3. Arguments
| Name | Description |
|---|---|
| | Print stack traces or not (defaults to true) |
21.8.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
21.9. shell:threads
21.9.1. Description
Prints the current threads (optionally with stacktraces)
21.9.2. Syntax
shell:threads [options] [id]
21.9.3. Arguments
| Name | Description |
|---|---|
| id | Show details for thread with this Id |
21.9.4. Options
| Name | Description |
|---|---|
| --tree | Display threads as a tree |
| --list | Display threads as a list |
| -e, --empty-groups | Show empty groups |
| --packages | Pruned packages |
| --help | Display this help message |
| --monitors | Display monitors |
| -t, --threshold | Minimal number of interesting stack trace line to display a thread |
| --locks | Display locks |
| --no-format | Disable table rendered output |
21.10. shell:ttop
21.10.1. Description
Display threads information
21.10.2. Syntax
shell:ttop [options]
21.10.3. Options
| Name | Description |
|---|---|
| --seconds, -s | Delay between updates in seconds |
| --order, -o | Comma separated list of sorting keys |
| --millis, -m | Delay between updates in milliseconds |
| --nthreads, -n | Only display up to NTHREADS threads |
| --help | Display this help message |
| --stats, -t | Comma separated list of stats to display |
21.11. shell:watch
21.11.1. Description
Watches & refreshes the output of a command
21.11.2. Syntax
shell:watch [options] command
21.11.3. Arguments
| Name | Description |
|---|---|
| command | The command to watch / refresh |
21.11.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -n, --interval | The interval between executions of the command in seconds |
| -a, --append | The output should be appended but not clear the console |
Chapter 22. ssh
22.1. ssh:ssh
22.1.1. Description
Connects to a remote SSH server
22.1.2. Syntax
ssh:ssh [options] hostname [command]
22.1.3. Arguments
| Name | Description |
|---|---|
| hostname | The host name to connect to via SSH |
| command | Optional command to execute |
22.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -P, --password | The password for remote login |
| -p, --port | The port to use for SSH connection |
| -q | Quiet Mode. Do not ask for confirmations |
| -r, --retries | retry connection establishment (up to attempts times) |
| -l, --username | The user name for remote login |
| -k, --keyfile | The private keyFile location when using key login, need have BouncyCastle registered as security provider using this flag |
22.2. ssh:sshd
22.2.1. Description
Creates a SSH server
22.2.2. Syntax
ssh:sshd [options]
22.2.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -b, --background | The service will run in the background |
| -p, --port | The port to setup the SSH server |
| -i, --idle-timeout | The session idle timeout in milliseconds |
| -w, --welcome-banner | The welcome banner to display when logging in |
| -n, --nio-workers | The number of NIO worker threads to use |
Chapter 23. subsystem
23.1. subsystem:info
23.1.1. Description
Display information about subsystems
23.1.2. Syntax
subsystem:info [options] [id]
23.1.3. Arguments
| Name | Description |
|---|---|
| id | Subsystem names or ids |
23.1.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --indent | Indentation method |
23.2. subsystem:install
23.2.1. Description
Install a new subsystem
23.2.2. Syntax
subsystem:install [options] [Subsystem to install the new subsystem into] [New subsystem url]
23.2.3. Arguments
| Name | Description |
|---|---|
| Subsystem to install the new subsystem into | |
| New subsystem url |
23.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
23.3. subsystem:list
23.3.1. Description
List all subsystems
23.3.2. Syntax
subsystem:list [options]
23.3.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
23.4. subsystem:start
23.4.1. Description
Start the specified subsystems
23.4.2. Syntax
subsystem:start [options] [id]
23.4.3. Arguments
| Name | Description |
|---|---|
| id | Subsystem names or ids |
23.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
23.5. subsystem:stop
23.5.1. Description
Stop the specified subsystems
23.5.2. Syntax
subsystem:stop [options] [id]
23.5.3. Arguments
| Name | Description |
|---|---|
| id | Subsystem names or ids |
23.5.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
23.6. subsystem:uninstall
23.6.1. Description
Uninstall the specified subsystems
23.6.2. Syntax
subsystem:uninstall [options] [id]
23.6.3. Arguments
| Name | Description |
|---|---|
| id | Subsystem names or ids |
23.6.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
Chapter 24. system
24.1. system:framework
24.1.1. Description
OSGi Framework options.
24.1.2. Syntax
system:framework [options] [framework]
24.1.3. Arguments
| Name | Description |
|---|---|
| framework | Name of the OSGi framework to use |
24.1.4. Options
| Name | Description |
|---|---|
| -nodebug, --disable-debug | Disable debug for the OSGi framework |
| --help | Display this help message |
| -debug, --enable-debug | Enable debug for the OSGi framework |
24.2. system:name
24.2.1. Description
Show or change Karaf instance name.
24.2.2. Syntax
system:name [options] [name]
24.2.3. Arguments
| Name | Description |
|---|---|
| name | New name for the instance |
24.2.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
24.3. system:property
24.3.1. Description
Get or set a system property.
24.3.2. Syntax
system:property [options] [key] [value]
24.3.3. Arguments
| Name | Description |
|---|---|
| key | The system property name |
| value | New value for the system property |
24.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| -f, --file-dump | Dump all system properties in a file (in data folder) |
| -p, --persistent | Persist the new value to the etc/system.properties file |
| -u, --unset | Show unset know properties with value unset |
24.4. system:shutdown
24.4.1. Description
Shutdown the Karaf container.
24.4.2. Syntax
system:shutdown [options] [time]
24.4.3. Arguments
| Name | Description |
|---|---|
| time | Shutdown after a specified delay. The time argument can have different formats. First, it can be an absolute time in the format hh:mm, in which hh is the hour (1 or 2 digits) and mm is the minute of the hour (in two digits). Second, it can be in the format m (or +m), in which m is the number of minutes to wait. The word now is an alias for 0 (or +0). |
24.4.4. Options
| Name | Description |
|---|---|
| -c, --clean, --clean-all, -ca | Force a clean restart by deleting the data directory |
| --help | Display this help message |
| -h, --halt | Halt the Karaf container. |
| -cc, --clean-cache, -cc | Force a clean restart by deleting the cache directory |
| -f, --force | Force the shutdown without confirmation message. |
| -r, --reboot | Reboot the Karaf container. |
24.5. system:start-level
24.5.1. Description
Gets or sets the system start level.
24.5.2. Syntax
system:start-level [options] [level]
24.5.3. Arguments
| Name | Description |
|---|---|
| level | The new system start level to set |
24.5.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
24.6. system:version
24.6.1. Description
Display the instance version
24.6.2. Syntax
system:version [options]
24.6.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
Chapter 25. web
25.1. web:launch
25.1.1. Description
Start the web application in a browser of the given bundle ID.
25.1.2. Syntax
web:launch [options] id
25.1.3. Arguments
| Name | Description |
|---|---|
| id | The bundle ID to start the browser with |
25.1.4. Options
| Name | Description |
|---|---|
| --base | The base URL to browse to, otherwise default localhost:8181 will be used. |
| --help | Display this help message |
25.2. web:list
25.2.1. Description
Lists details for war bundles.
25.2.2. Syntax
web:list [options]
25.2.3. Options
| Name | Description |
|---|---|
| --help | Display this help message |
| --no-format | Disable table rendered output |
25.3. web:start
25.3.1. Description
Start the web context of given bundles.
25.3.2. Syntax
web:start [options] ids
25.3.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle IDs separated by whitespaces |
25.3.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
25.4. web:stop
25.4.1. Description
Stop the web context of given bundles.
25.4.2. Syntax
web:stop [options] ids
25.4.3. Arguments
| Name | Description |
|---|---|
| ids | The list of bundle IDs separated by whitespaces |
25.4.4. Options
| Name | Description |
|---|---|
| --help | Display this help message |
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}