このコンテンツは選択した言語では利用できません。
18.6. Obtaining Node Information
A Red Hat Gluster Storage trusted storage pool consists of nodes, volumes, and bricks. The
get-state command outputs information about a node to a specified file.
Using the command line interface, external applications can invoke the command on all nodes of the trusted storage pool, and parse and collate the data obtained from all these nodes to get an easy-to-use and complete picture of the state of the trusted storage pool in a machine parseable format.
Executing the get-state Command
The get-state command outputs information about a node to a specified file and can be invoked in different ways. The table below shows the options that can be used with the get-state command.
# gluster get-state [odir path_to_output_dir] [file filename] [detail|volumeoptions]
Usage: get-state [options]
| Command | Description |
|---|---|
gluster get-state | glusterd state information is saved in the /var/run/gluster/glusterd_state_timestamp file. |
gluster get-state file filename | glusterd state information is saved in the /var/run/gluster/ directory with the filename as specified in the command. |
gluster get-state odir directory file filename | glusterd state information is saved in the directory and in the file name as specified in the command. |
gluster get-state detail | glusterd state information is saved in the /var/run/gluster/glusterd_state_timestamp file, and all clients connected per brick are included in the output. |
gluster get-state volumeoptions | glusterd state information is saved in the /var/run/gluster/glusterd_state_timestamp file, and all values for all the volume options are included in the output. |
Interpreting the Output with Examples
Invocation of the get-state command saves the information that reflects the node level status of the trusted storage pool as maintained in glusterd (no other daemons are supported as of now) to a file specified in the command. By default, the output will be dumped to /var/run/gluster/glusterd_state_timestamp file .
Invocation of the get-state command provides the following information:
| Section | Description |
|---|---|
| Global | Displays the UUID and the op-version of the glusterd. |
| Global options | Displays cluster specific options that have been set explicitly through the volume set command. |
| Peers | Displays the peer node information including its hostname and connection status. |
| Volumes | Displays the list of volumes created on this node along with the detailed information on each volume. |
| Services | Displays the list of the services configured on this node along with its status. |
| Misc | Displays miscellaneous information about the node. For example, configured ports. |
Example Output for
gluster get-state:
# gluster get-state
glusterd state dumped to /var/run/gluster/glusterd_state_timestamp
View the file using the
cat state_dump_file_path command:
[Global] MYUUID: 1e20ed87-c22a-4612-ab04-90765bccaea5 op-version: 31306 [Global options] cluster.server-quorum-ratio: 60 [Peers] Peer1.primary_hostname: output omitted Peer1.uuid: dfc7ff96-b61d-4c88-a3ad-b6852f72c5f0 Peer1.state: Peer in Cluster Peer1.connected: Connected Peer1.othernames: Peer2.primary_hostname: output omitted Peer2.uuid: dd83409e-22fa-4186-935a-648a1927cc9d Peer2.state: Peer in Cluster Peer2.connected: Connected Peer2.othernames: [Volumes] Volume1.name: tv1 Volume1.id: cf89d345-8cde-4c53-be85-1f3f20e7e410 Volume1.type: Distribute Volume1.transport_type: tcp Volume1.status: Started Volume1.brickcount: 3 Volume1.Brick1.path: output omitted:/root/bricks/tb11 Volume1.Brick1.hostname: output omitted Volume1.Brick1.port: 49152 Volume1.Brick1.rdma_port: 0 Volume1.Brick1.status: Started Volume1.Brick1.signedin: True Volume1.Brick2.path: output omitted:/root/bricks/tb12 Volume1.Brick2.hostname: output omitted Volume1.Brick3.path: output omitted:/root/bricks/tb13 Volume1.Brick3.hostname: output omitted Volume1.snap_count: 0 Volume1.stripe_count: 1 Volume1.replica_count: 1 Volume1.subvol_count: 3 Volume1.arbiter_count: 0 Volume1.disperse_count: 0 Volume1.redundancy_count: 0 Volume1.quorum_status: not_applicable Volume1.snapd_svc.online_status: Online Volume1.snapd_svc.inited: True Volume1.rebalance.id: 00000000-0000-0000-0000-000000000000 Volume1.rebalance.status: not_started Volume1.rebalance.failures: 0 Volume1.rebalance.skipped: 0 Volume1.rebalance.lookedup: 0 Volume1.rebalance.files: 0 Volume1.rebalance.data: 0Bytes [Volume1.options] features.uss: on transport.address-family: inet performance.readdir-ahead: on nfs.disable: on Volume2.name: tv2 Volume2.id: 700fd588-6fc2-46d5-9435-39c434656fe2 Volume2.type: Distribute Volume2.transport_type: tcp Volume2.status: Created Volume2.brickcount: 3 Volume2.Brick1.path: output omitted:/root/bricks/tb21 Volume2.Brick1.hostname: output omitted Volume2.Brick1.port: 0 Volume2.Brick1.rdma_port: 0 Volume2.Brick1.status: Stopped Volume2.Brick1.signedin: False Volume2.Brick2.path: output omitted:/root/bricks/tb22 Volume2.Brick2.hostname: output omitted Volume2.Brick3.path: output omitted:/root/bricks/tb23 Volume2.Brick3.hostname: output omitted Volume2.snap_count: 0 Volume2.stripe_count: 1 Volume2.replica_count: 1 Volume2.subvol_count: 3 Volume2.arbiter_count: 0 Volume2.disperse_count: 0 Volume2.redundancy_count: 0 Volume2.quorum_status: not_applicable Volume2.snapd_svc.online_status: Offline Volume2.snapd_svc.inited: False Volume2.rebalance.id: 00000000-0000-0000-0000-000000000000 Volume2.rebalance.status: not_started Volume2.rebalance.failures: 0 Volume2.rebalance.skipped: 0 Volume2.rebalance.lookedup: 0 Volume2.rebalance.files: 0 Volume2.rebalance.data: 0Bytes [Volume2.options] transport.address-family: inet performance.readdir-ahead: on nfs.disable: on Volume3.name: tv3 Volume3.id: 97b94d77-116a-4595-acfc-9676e4ebcbd2 Volume3.type: Tier Volume3.transport_type: tcp Volume3.status: Stopped Volume3.brickcount: 4 Volume3.Brick1.path: output omitted:/root/bricks/tb34 Volume3.Brick1.hostname: output omitted Volume3.Brick2.path: output omitted:/root/bricks/tb33 Volume3.Brick2.hostname: output omitted Volume3.Brick3.path: output omitted:/root/bricks/tb31 Volume3.Brick3.hostname: output omitted Volume3.Brick3.port: 49154 Volume3.Brick3.rdma_port: 0 Volume3.Brick3.status: Stopped Volume3.Brick3.signedin: False Volume3.Brick3.tier: Cold Volume3.Brick4.path: output omitted:/root/bricks/tb32 Volume3.Brick4.hostname: output omitted Volume3.snap_count: 0 Volume3.stripe_count: 1 Volume3.replica_count: 2 Volume3.subvol_count: 2 Volume3.arbiter_count: 0 Volume3.disperse_count: 0 Volume3.redundancy_count: 0 Volume3.quorum_status: not_applicable Volume3.snapd_svc.online_status: Offline Volume3.snapd_svc.inited: True Volume3.rebalance.id: 00000000-0000-0000-0000-000000000000 Volume3.rebalance.status: not_started Volume3.rebalance.failures: 0 Volume3.rebalance.skipped: 0 Volume3.rebalance.lookedup: 0 Volume3.rebalance.files: 0 Volume3.rebalance.data: 0Bytes Volume3.tier_info.cold_tier_type: Replicate Volume3.tier_info.cold_brick_count: 2 Volume3.tier_info.cold_replica_count: 2 Volume3.tier_info.cold_disperse_count: 0 Volume3.tier_info.cold_dist_leaf_count: 2 Volume3.tier_info.cold_redundancy_count: 0 Volume3.tier_info.hot_tier_type: Replicate Volume3.tier_info.hot_brick_count: 2 Volume3.tier_info.hot_replica_count: 2 Volume3.tier_info.promoted: 0 Volume3.tier_info.demoted: 0 [Volume3.options] cluster.tier-mode: cache features.ctr-enabled: on transport.address-family: inet performance.readdir-ahead: on nfs.disable: on Volume4.name: tv4 Volume4.id: ad7260ac-0d5c-461f-a39c-a0f4a4ff854b Volume4.type: Distribute Volume4.transport_type: tcp Volume4.status: Started Volume4.brickcount: 2 Volume4.Brick1.path: output omitted:/root/bricks/tb41 Volume4.Brick1.hostname: output omitted Volume4.Brick2.path: output omitted:/root/bricks/tb42 Volume4.Brick2.hostname: output omitted Volume4.snapshot1.name: tv4-snap_GMT-2016.11.24-12.10.15 Volume4.snapshot1.id: 2eea76ae-c99f-4128-b5c0-3233048312f2 Volume4.snapshot1.time: 2016-11-24 12:10:15 Volume4.snapshot1.status: in_use Volume4.snap_count: 1 Volume4.stripe_count: 1 Volume4.subvol_count: 2 Volume4.arbiter_count: 0 Volume4.disperse_count: 0 Volume4.redundancy_count: 0 Volume4.quorum_status: not_applicable Volume4.snapd_svc.online_status: Offline Volume4.snapd_svc.inited: True Volume4.rebalance.id: 00000000-0000-0000-0000-000000000000 Volume4.rebalance.status: not_started Volume4.rebalance.failures: 0 Volume4.rebalance.skipped: 0 Volume4.rebalance.lookedup: 0 Volume4.rebalance.files: 0 Volume4.rebalance.data: 0 Volume4.rebalance.data: 0 [Volume4.options] features.uss: on transport.address-family: inet performance.readdir-ahead: on nfs.disable: on [Services] svc1.name: glustershd svc1.online_status: Offline svc2.name: nfs svc2.online_status: Offline svc3.name: bitd svc3.online_status: Offline svc4.name: scrub svc4.online_status: Offline svc5.name: quotad svc5.online_status: Offline [Misc] Base port: 49152 Last allocated port: 49154
Invocation of the
gluster get-state volumeoptions lists all volume options irrespective of whether the volume option has been explicitly set or not.
Example Output for
gluster get-state volumeoptions:
# gluster get-state volumeoptions
glusterd state dumped to /var/run/gluster/glusterd_state_timestamp
View the file using the
cat state_dump_file_path command:
[Volume Options]
Volume1.name: Distvol
Volume1.options.count: 309
Volume1.options.value309: 0
Volume1.options.key309: cluster.max-bricks-per-process
Volume1.options.value308: off
Volume1.options.key308: cluster.brick-multiplex
Volume1.options.value307: on
Volume1.options.key307: disperse.optimistic-change-log
Volume1.options.value306: 60
Volume1.options.key306: performance.nl-cache-timeout
Volume1.options.value305: 10MB
Volume1.options.key305: performance.nl-cache-limit
Volume1.options.value304: false
Volume1.options.key304: performance.nl-cache-positive-entry
Volume1.options.value303: 10MB
Volume1.options.key303: performance.rda-cache-limit
Volume1.options.value302: 128KB
Volume1.options.key302: performance.rda-high-wmark
Volume1.options.value301: 4096
Volume1.options.key301: performance.rda-low-wmark
Volume1.options.value300: 131072
Volume1.options.key300: performance.rda-request-size
Volume1.options.value299: off
Volume1.options.key299: performance.parallel-readdir
Volume1.options.value298: off
Volume1.options.key298: cluster.use-compound-fops
Volume1.options.value297: 1024
Volume1.options.key297: disperse.shd-wait-qlength
Volume1.options.value296: 1
Volume1.options.key296: disperse.shd-max-threads
Volume1.options.value295: off
Volume1.options.key295: cluster.use-compound-fops
Volume1.options.value294: no
Volume1.options.key294: cluster.granular-entry-heal
Volume1.options.value293: full
Volume1.options.key293: cluster.locking-scheme
Volume1.options.value292: 1024
Volume1.options.key292: cluster.shd-wait-qlength
Volume1.options.value291: 1
Volume1.options.key291: cluster.shd-max-threads
Volume1.options.value290: round-robin
Volume1.options.key290: disperse.read-policy
Volume1.options.value289: on
Volume1.options.key289: dht.force-readdirp
Volume1.options.value288: 600
Volume1.options.key288: cluster.heal-timeout
Volume1.options.value287: 128
Volume1.options.key287: disperse.heal-wait-qlength
Volume1.options.value286: 8
Volume1.options.key286: disperse.background-heals
Volume1.options.value285: 60
Volume1.options.key285: features.lease-lock-recall-timeout
Volume1.options.value284: off
Volume1.options.key284: features.leases
Volume1.options.value283: 60
Volume1.options.key283: features.cache-invalidation-timeout
Volume1.options.value282: off
Volume1.options.key282: features.cache-invalidation
Volume1.options.value281: 120
Volume1.options.key281: features.expiry-time
Volume1.options.value280: false
Volume1.options.key280: features.scrub
Volume1.options.value279: biweekly
Volume1.options.key279: features.scrub-freq
Volume1.options.value278: lazy
Volume1.options.key278: features.scrub-throttle
Volume1.options.value277: 64MB
Volume1.options.key277: features.shard-block-size
Volume1.options.value276: off
Volume1.options.key276: features.shard
Volume1.options.value275: off
Volume1.options.key275: ganesha.enable
Volume1.options.value274: (null)
Volume1.options.key274: client.bind-insecure
Volume1.options.value273: no
Volume1.options.key273: cluster.quorum-reads
Volume1.options.value272: enable
Volume1.options.key272: cluster.disperse-self-heal-daemon
Volume1.options.value271: off
Volume1.options.key271: locks.mandatory-locking
Volume1.options.value270: off
Volume1.options.key270: locks.trace
Volume1.options.value269: 25000
Volume1.options.key269: features.ctr-sql-db-wal-autocheckpoint
Volume1.options.value268: 12500
Volume1.options.key268: features.ctr-sql-db-cachesize
Volume1.options.value267: 300
Volume1.options.key267: features.ctr_lookupheal_inode_timeout
Volume1.options.value266: 300
Volume1.options.key266: features.ctr_lookupheal_link_timeout
Volume1.options.value265: off
Volume1.options.key265: features.ctr_link_consistency
Volume1.options.value264: off
Volume1.options.key264: features.ctr-record-metadata-heat
Volume1.options.value263: off
Volume1.options.key263: features.record-counters
Volume1.options.value262: off
Volume1.options.key262: features.ctr-enabled
Volume1.options.value261: 100
Volume1.options.key261: cluster.tier-query-limit
Volume1.options.value260: 10000
Volume1.options.key260: cluster.tier-max-files
Volume1.options.value259: 4000
Volume1.options.key259: cluster.tier-max-mb
Volume1.options.value258: 0
Volume1.options.key258: cluster.tier-max-promote-file-size
Volume1.options.value257: cache
Volume1.options.key257: cluster.tier-mode
Volume1.options.value256: 75
Volume1.options.key256: cluster.watermark-low
Volume1.options.value255: 90
Volume1.options.key255: cluster.watermark-hi
Volume1.options.value254: 3600
Volume1.options.key254: cluster.tier-demote-frequency
Volume1.options.value253: 120
Volume1.options.key253: cluster.tier-promote-frequency
Volume1.options.value252: off
Volume1.options.key252: cluster.tier-pause
Volume1.options.value251: 0
Volume1.options.key251: cluster.read-freq-threshold
Volume1.options.value250: 0
Volume1.options.key250: cluster.write-freq-threshold
Volume1.options.value249: disable
Volume1.options.key249: cluster.enable-shared-storage
Volume1.options.value248: off
Volume1.options.key248: features.trash-internal-op
Volume1.options.value247: 5MB
Volume1.options.key247: features.trash-max-filesize
Volume1.options.value246: (null)
Volume1.options.key246: features.trash-eliminate-path
Volume1.options.value245: .trashcan
Volume1.options.key245: features.trash-dir
Volume1.options.value244: off
Volume1.options.key244: features.trash
Volume1.options.value243: 120
Volume1.options.key243: features.barrier-timeout
Volume1.options.value242: disable
Volume1.options.key242: features.barrier
Volume1.options.value241: off
Volume1.options.key241: changelog.capture-del-path
Volume1.options.value240: 120
Volume1.options.key240: changelog.changelog-barrier-timeout
Volume1.options.value239: 5
Volume1.options.key239: changelog.fsync-interval
Volume1.options.value238: 15
Volume1.options.key238: changelog.rollover-time
Volume1.options.value237: ascii
Volume1.options.key237: changelog.encoding
Volume1.options.value236: (null)
Volume1.options.key236: changelog.changelog-dir
Volume1.options.value235: off
Volume1.options.key235: changelog.changelog
Volume1.options.value234: 0
Volume1.options.key234: cluster.server-quorum-ratio
Volume1.options.value233: off
Volume1.options.key233: cluster.server-quorum-type
Volume1.options.value232: off
Volume1.options.key232: storage.bd-aio
Volume1.options.value231: off
Volume1.options.key231: storage.build-pgfid
Volume1.options.value230: 30
Volume1.options.key230: storage.health-check-interval
Volume1.options.value229: off
Volume1.options.key229: storage.node-uuid-pathinfo
Volume1.options.value228: -1
Volume1.options.key228: storage.owner-gid
Volume1.options.value227: -1
Volume1.options.key227: storage.owner-uid
Volume1.options.value226: 0
Volume1.options.key226: storage.batch-fsync-delay-usec
Volume1.options.value225: reverse-fsync
Volume1.options.key225: storage.batch-fsync-mode
Volume1.options.value224: off
Volume1.options.key224: storage.linux-aio
Volume1.options.value223: 180
Volume1.options.key223: features.auto-commit-period
Volume1.options.value222: relax
Volume1.options.key222: features.retention-mode
Volume1.options.value221: 120
Volume1.options.key221: features.default-retention-period
Volume1.options.value220: off
Volume1.options.key220: features.worm-file-level
Volume1.options.value219: off
Volume1.options.key219: features.worm
Volume1.options.value218: off
Volume1.options.key218: features.read-only
Volume1.options.value217: (null)
Volume1.options.key217: nfs.auth-cache-ttl-sec
Volume1.options.value216: (null)
Volume1.options.key216: nfs.auth-refresh-interval-sec
Volume1.options.value215: (null)
Volume1.options.key215: nfs.exports-auth-enable
Volume1.options.value214: on
Volume1.options.key214: nfs.rdirplus
Volume1.options.value213: (1 * 1048576ULL)
Volume1.options.key213: nfs.readdir-size
Volume1.options.value212: (1 * 1048576ULL)
Volume1.options.key212: nfs.write-size
Volume1.options.value211: (1 * 1048576ULL)
Volume1.options.key211: nfs.read-size
Volume1.options.value210: 0x20000
Volume1.options.key210: nfs.drc-size
Volume1.options.value209: off
Volume1.options.key209: nfs.drc
Volume1.options.value208: off
Volume1.options.key208: nfs.server-aux-gids
Volume1.options.value207: /sbin/rpc.statd
Volume1.options.key207: nfs.rpc-statd
Volume1.options.value206: /var/lib/glusterd/nfs/rmtab
Volume1.options.key206: nfs.mount-rmtab
Volume1.options.value205: off
Volume1.options.key205: nfs.mount-udp
Volume1.options.value204: ON
Volume1.options.key204: nfs.acl
Volume1.options.value203: on
Volume1.options.key203: nfs.nlm
Volume1.options.value202: ON
Volume1.options.key202: nfs.disable
Volume1.options.value201:
Volume1.options.key201: nfs.export-dir
Volume1.options.value200: read-write
Volume1.options.key200: nfs.volume-access
Volume1.options.value199: off
Volume1.options.key199: nfs.trusted-write
Volume1.options.value198: off
Volume1.options.key198: nfs.trusted-sync
Volume1.options.value197: off
Volume1.options.key197: nfs.ports-insecure
Volume1.options.value196: none
Volume1.options.key196: nfs.rpc-auth-reject
Volume1.options.value195: all
Volume1.options.key195: nfs.rpc-auth-allow
Volume1.options.value194: on
Volume1.options.key194: nfs.rpc-auth-null
Volume1.options.value193: on
Volume1.options.key193: nfs.rpc-auth-unix
Volume1.options.value192: 2049
Volume1.options.key192: nfs.port
Volume1.options.value191: 16
Volume1.options.key191: nfs.outstanding-rpc-limit
Volume1.options.value190: on
Volume1.options.key190: nfs.register-with-portmap
Volume1.options.value189: off
Volume1.options.key189: nfs.dynamic-volumes
Volume1.options.value188: off
Volume1.options.key188: nfs.addr-namelookup
Volume1.options.value187: on
Volume1.options.key187: nfs.export-volumes
Volume1.options.value186: on
Volume1.options.key186: nfs.export-dirs
Volume1.options.value185: 15
Volume1.options.key185: nfs.mem-factor
Volume1.options.value184: ON
Volume1.options.key184: nfs.enable-ino32
Volume1.options.value183: (null)
Volume1.options.key183: debug.error-fops
Volume1.options.value182: off
Volume1.options.key182: debug.random-failure
Volume1.options.value181: (null)
Volume1.options.key181: debug.error-number
Volume1.options.value180: (null)
Volume1.options.key180: debug.error-failure
Volume1.options.value179: off
Volume1.options.key179: debug.error-gen
Volume1.options.value178: (null)
Volume1.options.key178: debug.include-ops
Volume1.options.value177: (null)
Volume1.options.key177: debug.exclude-ops
Volume1.options.value176: no
Volume1.options.key176: debug.log-file
Volume1.options.value175: no
Volume1.options.key175: debug.log-history
Volume1.options.value174: off
Volume1.options.key174: debug.trace
Volume1.options.value173: disable
Volume1.options.key173: features.bitrot
Volume1.options.value172: off
Volume1.options.key172: features.inode-quota
Volume1.options.value171: off
Volume1.options.key171: features.quota
Volume1.options.value170: off
Volume1.options.key170: geo-replication.ignore-pid-check
Volume1.options.value169: off
Volume1.options.key169: geo-replication.ignore-pid-check
Volume1.options.value168: off
Volume1.options.key168: geo-replication.indexing
Volume1.options.value167: off
Volume1.options.key167: geo-replication.indexing
Volume1.options.value166: off
Volume1.options.key166: features.quota-deem-statfs
Volume1.options.value165: 86400
Volume1.options.key165: features.alert-time
Volume1.options.value164: 5
Volume1.options.key164: features.hard-timeout
Volume1.options.value163: 60
Volume1.options.key163: features.soft-timeout
Volume1.options.value162: 80%
Volume1.options.key162: features.default-soft-limit
Volume1.options.value161: 0
Volume1.options.key161: features.quota-timeout
Volume1.options.value160: (null)
Volume1.options.key160: features.limit-usage
Volume1.options.value159: false
Volume1.options.key159: network.compression.debug
Volume1.options.value158: -1
Volume1.options.key158: network.compression.compression-level
Volume1.options.value157: 0
Volume1.options.key157: network.compression.min-size
Volume1.options.value156: 8
Volume1.options.key156: network.compression.mem-level
Volume1.options.value155: -15
Volume1.options.key155: network.compression.window-size
Volume1.options.value154: off
Volume1.options.key154: network.compression
Volume1.options.value153: off
Volume1.options.key153: features.show-snapshot-directory
Volume1.options.value152: .snaps
Volume1.options.key152: features.snapshot-directory
Volume1.options.value151: off
Volume1.options.key151: features.uss
Volume1.options.value150: false
Volume1.options.key150: performance.cache-invalidation
Volume1.options.value149: true
Volume1.options.key149: performance.force-readdirp
Volume1.options.value148: off
Volume1.options.key148: performance.nfs.io-threads
Volume1.options.value147: off
Volume1.options.key147: performance.nfs.stat-prefetch
Volume1.options.value146: off
Volume1.options.key146: performance.nfs.quick-read
Volume1.options.value145: off
Volume1.options.key145: performance.nfs.io-cache
Volume1.options.value144: off
Volume1.options.key144: performance.nfs.read-ahead
Volume1.options.value143: on
Volume1.options.key143: performance.nfs.write-behind
Volume1.options.value142: on
Volume1.options.key142: performance.client-io-threads
Volume1.options.value141: on
Volume1.options.key141: performance.stat-prefetch
Volume1.options.value140: off
Volume1.options.key140: performance.nl-cache
Volume1.options.value139: on
Volume1.options.key139: performance.open-behind
Volume1.options.value138: on
Volume1.options.key138: performance.quick-read
Volume1.options.value137: on
Volume1.options.key137: performance.io-cache
Volume1.options.value136: on
Volume1.options.key136: performance.readdir-ahead
Volume1.options.value135: on
Volume1.options.key135: performance.read-ahead
Volume1.options.value134: on
Volume1.options.key134: performance.write-behind
Volume1.options.value133: 10
Volume1.options.key133: transport.listen-backlog
Volume1.options.value132: inet
Volume1.options.key132: transport.address-family
Volume1.options.value131: (null)
Volume1.options.key131: ssl.ec-curve
Volume1.options.value130: (null)
Volume1.options.key130: ssl.dh-param
Volume1.options.value129: (null)
Volume1.options.key129: ssl.cipher-list
Volume1.options.value128: (null)
Volume1.options.key128: ssl.certificate-depth
Volume1.options.value127: (null)
Volume1.options.key127: ssl.crl-path
Volume1.options.value126: (null)
Volume1.options.key126: ssl.ca-list
Volume1.options.value125: (null)
Volume1.options.key125: ssl.private-key
Volume1.options.value124: (null)
Volume1.options.key124: ssl.own-cert
Volume1.options.value123: 1
Volume1.options.key123: server.event-threads
Volume1.options.value122: (null)
Volume1.options.key122: server.own-thread
Volume1.options.value121: 300
Volume1.options.key121: server.gid-timeout
Volume1.options.value120: on
Volume1.options.key120: client.send-gids
Volume1.options.value119: on
Volume1.options.key119: server.dynamic-auth
Volume1.options.value118: off
Volume1.options.key118: server.manage-gids
Volume1.options.value117: *
Volume1.options.key117: auth.ssl-allow
Volume1.options.value116: (null)
Volume1.options.key116: server.ssl
Volume1.options.value115: 10
Volume1.options.key115: features.grace-timeout
Volume1.options.value114: off
Volume1.options.key114: features.lock-heal
Volume1.options.value113: 64
Volume1.options.key113: server.outstanding-rpc-limit
Volume1.options.value112: /var/run/gluster
Volume1.options.key112: server.statedump-path
Volume1.options.value111: 65534
Volume1.options.key111: server.anongid
Volume1.options.value110: 65534
Volume1.options.key110: server.anonuid
Volume1.options.value109: off
Volume1.options.key109: server.root-squash
Volume1.options.value108: (null)
Volume1.options.key108: server.allow-insecure
Volume1.options.value107: (null)
Volume1.options.key107: transport.keepalive
Volume1.options.value106: (null)
Volume1.options.key106: auth.reject
Volume1.options.value105: *
Volume1.options.key105: auth.allow
Volume1.options.value104: 16384
Volume1.options.key104: network.inode-lru-limit
Volume1.options.value103: (null)
Volume1.options.key103: network.tcp-window-size
Volume1.options.value102: 42
Volume1.options.key102: network.ping-timeout
Volume1.options.value101: 2
Volume1.options.key101: client.event-threads
Volume1.options.value100: disable
Volume1.options.key100: network.remote-dio
Volume1.options.value99: 10
Volume1.options.key99: features.grace-timeout
Volume1.options.value98: off
Volume1.options.key98: features.lock-heal
Volume1.options.value97: (null)
Volume1.options.key97: network.tcp-window-size
Volume1.options.value96: 42
Volume1.options.key96: network.ping-timeout
Volume1.options.value95: 1800
Volume1.options.key95: network.frame-timeout
Volume1.options.value94: 4096
Volume1.options.key94: encryption.block-size
Volume1.options.value93: 256
Volume1.options.key93: encryption.data-key-size
Volume1.options.value92: (null)
Volume1.options.key92: encryption.master-key
Volume1.options.value90: false
Volume1.options.key90: performance.cache-samba-metadata
Volume1.options.value89: true
Volume1.options.key89: performance.cache-swift-metadata
Volume1.options.value88: 1
Volume1.options.key88: performance.md-cache-timeout
Volume1.options.value87: 4
Volume1.options.key87: performance.read-ahead-page-count
Volume1.options.value86: no
Volume1.options.key86: performance.read-after-open
Volume1.options.value85: yes
Volume1.options.key85: performance.lazy-open
Volume1.options.value84: off
Volume1.options.key84: performance.nfs.strict-write-ordering
Volume1.options.value83: off
Volume1.options.key83: performance.strict-write-ordering
Volume1.options.value82: off
Volume1.options.key82: performance.nfs.strict-o-direct
Volume1.options.value81: off
Volume1.options.key81: performance.strict-o-direct
Volume1.options.value80: 1MB
Volume1.options.key80: performance.nfs.write-behind-window-size
Volume1.options.value79: off
Volume1.options.key79: performance.resync-failed-syncs-after-fsync
Volume1.options.value78: 1MB
Volume1.options.key78: performance.write-behind-window-size
Volume1.options.value77: on
Volume1.options.key77: performance.nfs.flush-behind
Volume1.options.value76: on
Volume1.options.key76: performance.flush-behind
Volume1.options.value75: 128MB
Volume1.options.key75: performance.cache-size
Volume1.options.value74: 0
Volume1.options.key74: performance.least-rate-limit
Volume1.options.value73: on
Volume1.options.key73: performance.enable-least-priority
Volume1.options.value72: 1
Volume1.options.key72: performance.least-prio-threads
Volume1.options.value71: 16
Volume1.options.key71: performance.low-prio-threads
Volume1.options.value70: 16
Volume1.options.key70: performance.normal-prio-threads
Volume1.options.value69: 16
Volume1.options.key69: performance.high-prio-threads
Volume1.options.value68: 16
Volume1.options.key68: performance.io-thread-count
Volume1.options.value67: 32MB
Volume1.options.key67: performance.cache-size
Volume1.options.value66:
Volume1.options.key66: performance.cache-priority
Volume1.options.value65: 1
Volume1.options.key65: performance.cache-refresh-timeout
Volume1.options.value64: 0
Volume1.options.key64: performance.cache-min-file-size
Volume1.options.value63: 0
Volume1.options.key63: performance.cache-max-file-size
Volume1.options.value62: 86400
Volume1.options.key62: diagnostics.stats-dnscache-ttl-sec
Volume1.options.value61: 65535
Volume1.options.key61: diagnostics.fop-sample-buf-size
Volume1.options.value60: 0
Volume1.options.key60: diagnostics.fop-sample-interval
Volume1.options.value59: 0
Volume1.options.key59: diagnostics.stats-dump-interval
Volume1.options.value58: 120
Volume1.options.key58: diagnostics.client-log-flush-timeout
Volume1.options.value57: 120
Volume1.options.key57: diagnostics.brick-log-flush-timeout
Volume1.options.value56: 5
Volume1.options.key56: diagnostics.client-log-buf-size
Volume1.options.value55: 5
Volume1.options.key55: diagnostics.brick-log-buf-size
Volume1.options.value54: (null)
Volume1.options.key54: diagnostics.client-log-format
Volume1.options.value53: (null)
Volume1.options.key53: diagnostics.brick-log-format
Volume1.options.value52: (null)
Volume1.options.key52: diagnostics.client-logger
Volume1.options.value51: (null)
Volume1.options.key51: diagnostics.brick-logger
Volume1.options.value50: CRITICAL
Volume1.options.key50: diagnostics.client-sys-log-level
Volume1.options.value49: CRITICAL
Volume1.options.key49: diagnostics.brick-sys-log-level
Volume1.options.value48: INFO
Volume1.options.key48: diagnostics.client-log-level
Volume1.options.value47: INFO
Volume1.options.key47: diagnostics.brick-log-level
Volume1.options.value46: off
Volume1.options.key46: diagnostics.count-fop-hits
Volume1.options.value45: off
Volume1.options.key45: diagnostics.dump-fd-stats
Volume1.options.value44: off
Volume1.options.key44: diagnostics.latency-measurement
Volume1.options.value43: true
Volume1.options.key43: cluster.stripe-coalesce
Volume1.options.value42: 128KB
Volume1.options.key42: cluster.stripe-block-size
Volume1.options.value41: none
Volume1.options.key41: cluster.favorite-child-policy
Volume1.options.value40: 128
Volume1.options.key40: cluster.heal-wait-queue-length
Volume1.options.value39: no
Volume1.options.key39: cluster.consistent-metadata
Volume1.options.value38: on
Volume1.options.key38: cluster.ensure-durability
Volume1.options.value37: 1
Volume1.options.key37: cluster.post-op-delay-secs
Volume1.options.value36: 1KB
Volume1.options.key36: cluster.self-heal-readdir-size
Volume1.options.value35: true
Volume1.options.key35: cluster.choose-local
Volume1.options.value34: (null)
Volume1.options.key34: cluster.quorum-count
Volume1.options.value33: none
Volume1.options.key33: cluster.quorum-type
Volume1.options.value32: on
Volume1.options.key32: disperse.eager-lock
Volume1.options.value31: on
Volume1.options.key31: cluster.eager-lock
Volume1.options.value30: (null)
Volume1.options.key30: cluster.data-self-heal-algorithm
Volume1.options.value29: on
Volume1.options.key29: cluster.metadata-change-log
Volume1.options.value28: on
Volume1.options.key28: cluster.data-change-log
Volume1.options.value27: 1
Volume1.options.key27: cluster.self-heal-window-size
Volume1.options.value26: 600
Volume1.options.key26: cluster.heal-timeout
Volume1.options.value25: on
Volume1.options.key25: cluster.self-heal-daemon
Volume1.options.value24: on
Volume1.options.key24: cluster.entry-self-heal
Volume1.options.value23: on
Volume1.options.key23: cluster.data-self-heal
Volume1.options.value22: on
Volume1.options.key22: cluster.metadata-self-heal
Volume1.options.value21: 8
Volume1.options.key21: cluster.background-self-heal-count
Volume1.options.value20: 1
Volume1.options.key20: cluster.read-hash-mode
Volume1.options.value19: -1
Volume1.options.key19: cluster.read-subvolume-index
Volume1.options.value18: (null)
Volume1.options.key18: cluster.read-subvolume
Volume1.options.value17: on
Volume1.options.key17: cluster.entry-change-log
Volume1.options.value16: (null)
Volume1.options.key16: cluster.switch-pattern
Volume1.options.value15: on
Volume1.options.key15: cluster.weighted-rebalance
Volume1.options.value14: (null)
Volume1.options.key14: cluster.local-volume-name
Volume1.options.value13: off
Volume1.options.key13: cluster.lock-migration
Volume1.options.value12: normal
Volume1.options.key12: cluster.rebal-throttle
Volume1.options.value11: off
Volume1.options.key11: cluster.randomize-hash-range-by-gfid
Volume1.options.value10: trusted.glusterfs.dht
Volume1.options.key10: cluster.dht-xattr-name
Volume1.options.value9: (null)
Volume1.options.key9: cluster.extra-hash-regex
Volume1.options.value8: (null)
Volume1.options.key8: cluster.rsync-hash-regex
Volume1.options.value7: off
Volume1.options.key7: cluster.readdir-optimize
Volume1.options.value6: (null)
Volume1.options.key6: cluster.subvols-per-directory
Volume1.options.value5: off
Volume1.options.key5: cluster.rebalance-stats
Volume1.options.value4: 5%
Volume1.options.key4: cluster.min-free-inodes
Volume1.options.value3: 10%
Volume1.options.key3: cluster.min-free-disk
Volume1.options.value2: off
Volume1.options.key2: cluster.lookup-optimize
Volume1.options.value1: on
Volume1.options.key1: cluster.lookup-unhashed
output truncated