このコンテンツは選択した言語では利用できません。

Installing and configuring Red Hat Process Automation Manager on Red Hat JBoss EAP 7.1


Red Hat Process Automation Manager 7.1

Red Hat Customer Content Services

Abstract

This document describes how to install Red Hat Process Automation Manager on a Red Hat JBoss EAP 7.1 installation.

Preface

This document describes how to install Red Hat Process Automation Manager on a Red Hat JBoss Enterprise Application Platform 7.1 instance.

Prerequisites

Chapter 1. About Red Hat Process Automation Manager

Red Hat Process Automation Manager is the Red Hat middleware platform for creating business automation applications and microservices. It enables enterprise business and IT users to document, simulate, manage, automate, and monitor business processes and policies. It is designed to empower business and IT users to collaborate more effectively, so business applications can be changed easily and quickly.

Red Hat JBoss Enterprise Application Platform (Red Hat JBoss EAP) 7.1 is a certified implementation of the Java Enterprise Edition 7 (Java EE 7) full and web profile specifications. Red Hat JBoss EAP provides preconfigured options for features such as high availability, clustering, messaging, and distributed caching. It also enables users to write, deploy, and run applications using the various APIs and services that Red Hat JBoss EAP provides.

The instructions in this document explain how to install Red Hat Process Automation Manager in a Red Hat JBoss EAP 7.1 server instance. For instruction on how to install Red Hat Process Automation Manager in other environments, see the following documents:

For information on supported components, see the following documents:

Chapter 2. Roles and users

To access Business Central or Process Server, you must create users and assign them appropriate roles before the servers are started.

The Business Central and Process Server use Java Authentication and Authorization Service (JAAS) login module to authenticate the users. If both Business Central and Process Server are running on a single instance, then they share the same JAAS subject and security domain. Therefore, a user, who is authenticated for Business Central can also access Process Server.

However, if Business Central and Process Server are running on different instances, then the JAAS login module is triggered for both individually. Therefore, a user, who is authenticated for Business Central, needs to be authenticated separately to access the Process Server (for example, to view or manage process definitions in Business Central). In case, the user is not authenticated on the Process Server, then 401 error is logged in the log file, displaying Invalid credentials to load data from remote server. Contact your system administrator. message in Business Central.

This section describes available Red Hat Process Automation Manager user roles.

Note

The admin, analyst, developer, manager, process-admin, user, and rest-all roles are reserved for Business Central. The kie-server role is reserved for Process Server. For this reason, the available roles can differ depending on whether Business Central, Process Server, or both are installed.

  • admin: Users with the admin role are the Business Central administrators. They can manage users and create, clone, and manage the repositories. They have full access to make required changes in the application. Users with the admin role have access to all areas within Red Hat Process Automation Manager.
  • analyst: Users with the analyst role have access to all high-level features. They can model and execute their projects. However, these users cannot add contributors to spaces or delete spaces in the Design → Projects view. Access to the Deploy → Execution Servers view, which is intended for administrators, is not available to users with the analyst role. However, the Deploy button is available to these users when they access the Library perspective.
  • developer: Users with the developer role have access to almost all features and can manage rules, models, process flows, forms, and dashboards. They can manage the asset repository, they can create, build, and deploy projects, and they can use Red Hat JBoss Developer Studio to view processes. Only certain administrative functions such as creating and cloning a new repository are hidden from users with the developer role.
  • manager: Users with the manager role can view reports. These users are usually interested in statistics about the business processes and their performance, business indicators, and other business-related reporting. A user with this role has access only to process and task reports.
  • process-admin: Users with the process-admin role are business process administrators. They have full access to business processes, business tasks, and execution errors. These users can also view business reports and have access to the Task Inbox list.
  • user: Users with the user role can work on the Task Inbox list, which contains business tasks that are part of currently running processes. Users with this role can view process and task reports and manage processes.
  • rest-all: Users with the rest-all role can access Business Central REST capabilities.
  • kie-server: Users with the kie-server role can access Process Server (KIE Server) REST capabilities. This role is mandatory for users to have access to Manage and Track views in Business Central.

Chapter 3. Downloading the Red Hat Process Automation Manager installation files

Depending on your environment and installation requirements, download a Red Hat Process Automation Manager distribution.

Procedure

  1. Navigate to the Software Downloads page in the Red Hat Customer Portal (login required), and select the product and version from the drop-down options:

    • Product: Process Automation Manager
    • Version: 7.1
  2. Download one of the following product distributions, depending on your preferred installation method:

    Note

    You only need to download one of these distributions.

    • If you want to use the installer to install Red Hat Process Automation Manager on Red Hat JBoss EAP 7.1 , download Red Hat Process Automation Manager 7.1.0 Installer (rhpam-installer-7.1.0.jar). The installer graphical user interface guides you through the installation process.
    • If you want to install Red Hat Process Automation Manager on Red Hat JBoss EAP 7.1 using the deployable zip files, download the following files:

      • Red Hat Process Automation Manager 7.1.0 Process Server for All Supported EE7 Containers (rhpam-7.1.0-kie-server-ee7.zip)
      • Red Hat Process Automation Manager 7.1.0 Business Central Deployable for EAP 7 (rhpam-7.1.0-business-central-eap7-deployable.zip)

    The ZIP files do not require a graphical user interface so you can install Red Hat Process Automation Manager using SSH.

    • To run Business Central without needing to deploy it to an application server, download Red Hat Process Automation Manager 7.1.0 Business Central Standalone (rhpam-7.1.0-business-central-standalone.jar).

Chapter 4. Using the Red Hat Process Automation Manager installer

This section describes how to install Process Server and the headless Process Automation Manager controller using the installer JAR file. The JAR file is an executable file that installs Red Hat Process Automation Manager in an existing Red Hat JBoss EAP 7.1 server installation. You can run the installer in interactive or command line interface (CLI) mode.

Note

The Red Hat Process Automation Manager JAR file installer does not support the Red Hat JBoss EAP distribution installed by yum or RPM Package Manager. If you want to install Red Hat Process Automation Manager in this type of Red Hat JBoss EAP installation, download the Red Hat Process Automation Manager 7.1 Deployable for Red Hat JBoss EAP 7.1 file and follow the steps in Chapter 5, Installing Red Hat Process Automation Manager from ZIP files.

Note

Because IBM JDK cannot use keystores generated on other JDKs, you cannot install Red Hat Process Automation Manager into an existing Red Hat JBoss EAP installation running on IBM JDK with a keystore generated on another JDK.

Next steps:

Follow the instructions in one of the following sections:

4.1. Using the installer in interactive mode

The installer for Red Hat Process Automation Manager is an executable JAR file. You can use it to install Red Hat Process Automation Manager in an existing Red Hat JBoss EAP 7.1 server installation.

Note

For security reasons, you should run the installer as a non-root user.

Prerequisites

  • A backed-up Red Hat JBoss EAP 7.1 or higher server installation is available.
  • Sufficient user permissions to complete the installation are granted.
  • The JAR binary is included in $PATH environment variable. On Red Hat Enterprise Linux, it is included in the java-$JAVA_VERSION-openjdk-devel package.

    Note

    Red Hat Process Automation Manager is designed to work with UTF-8 encoding. If a different encoding system is used by the underlying JVM, unexpected errors might occur. To ensure UTF-8 is used by the JVM, use the "-Dfile.encoding=UTF-8" system property.

Procedure

  1. In a terminal window, navigate to the directory where you downloaded the installer JAR file and enter the following command:

    java -jar rhpam-installer-7.1.0.jar
    Note

    When running the installer on Windows, you may be prompted to provide administrator credentials during the installation. To prevent this requirement, add the izpack.mode=privileged option to the installation command:

    java -Dizpack.mode=privileged -jar
    rhpam-installer-7.1.0.jar

    Furthermore, when running the installer on a 32-bit Java virtual machine, you might encounter memory limitations. To prevent this issue, run this command:

    java -XX:MaxHeapSize=4g -jar
    rhpam-installer-7.1.0.jar

    The graphical installer displays a splash screen and a license agreement page.

  2. Click I accept the terms of this license agreement and click Next.
  3. Specify the Red Hat JBoss EAP 7.1 server home where you want to install Red Hat Process Automation Manager and click Next.
  4. Select the components that you want to install and click Next.

    Note

    You can install Business Central and Process Server on the same server. However, you should install Business Central and Process Server on different servers in production environments. To do this, run the installer twice.

  5. Create a user and click Next. By default, the new user is given the admin, kie-server, and rest-all roles. To select another role, deselect admin. For more information, see Chapter 2, Roles and users.

    Note

    Make sure that the specified user name is not the same as an existing user, role, or group. For example, do not create a user with the user name admin.

    The password must have at least eight characters and must contain at least one number and one non-alphanumeric character, but not & (ampersand).

    Make a note of the user name and password. You will need them to access Business Central and Process Server.

  6. On the Installation Overview page, click Next to start the installation. The Installation Overview page lists the components that you will install.
  7. When the installation has completed, click Next.
  8. On the Configure Runtime Environment page, choose whether to perform the default installation or perform an advanced configuration.

    If you choose Perform advanced configuration, you can choose to configure database settings or customize certain Process Server options.

  9. If you selected Customize database settings, on the JDBC Drive Configuration page specify a data source JDBC driver vendor, select one or more Driver JAR files, and click Next.

    A data source is an object that enables a Java Database Connectivity (JDBC) client, such as an application server, to establish a connection with a database. Applications look up the data source on the Java Naming and Directory Interface (JNDI) tree or in the local application context and request a database connection to retrieve data. You must configure data sources for Process Server to ensure proper data exchange between the servers and the designated database.

  10. If you selected Customize Process Server settings, change any of the following, if desired:

    • Change the name of the Process Server property.
    • Change the URL of the headless Process Automation Manager controller.
    • Deselect any Process Server server options.
  11. Click Next to configure the runtime environment.
  12. When Processing finished appears at the top of the screen, click Next to complete the installation.
  13. If desired, click Generate Installation Script and Properties File to save the installation data in an XML file, then click Done. You can use this file to automatically install Red Hat Process Automation Manager on the same type of server. Note that you must change the installpath parameter in the XML file to specify the path of the new server that you want to install Red Hat Process Automation Manager on. Enter the following command to perform an installation with the XML file:

    java -jar rhpam-installer-7.1.0.jar <path-to-file>

You have successfully installed Red Hat Process Automation Manager using the installer. If you installed only Business Central, repeat these steps to install Process Server on a separate server.

4.2. Using the installer in CLI mode

You can run the Red Hat Process Automation Manager installer through the command-line interface (CLI).

Note

For security reasons, you should run the installer as a non-root user.

Prerequisites

  • A backed-up Red Hat JBoss EAP 7.1 or higher server installation is available.
  • Sufficient user permissions to complete the installation are granted.
  • The JAR binary is included in the $PATH environment variable. On Red Hat Enterprise Linux, it is included in the java-$JAVA_VERSION-openjdk-devel package.

    Note

    Red Hat Process Automation Manager is designed to work with UTF-8 encoding. If a different encoding system is used by the underlying JVM, unexpected errors might occur. To ensure UTF-8 is used by the JVM, use the "-Dfile.encoding=UTF-8" system property.

Procedure

  1. In a terminal window, navigate to the directory where you downloaded the installer file and enter the following command:

    java -jar rhpam-installer-7.1.0.jar -console

    The command-line interactive process will start and display the End-User License Agreement.

    press 1 to continue, 2 to quit, 3 to redisplay.
  2. Read the license agreement, enter 1, and press Enter to continue:

    Specify the home directory of one of the following servers:  Red Hat JBoss EAP 7.1
  3. Enter the parent directory of an existing Red Hat JBoss EAP 7.1 installation.

    The installer will verify the location of the installation at the location provided. Enter 1 to confirm and continue.

    Note

    You can install Business Central and Process Server on the same server. However, you should install Business Central and Process Server on different servers in production environments.

  4. Follow the instructions in the installer to complete the installation.

    Note

    When you create the user name and password, make sure that the specified user name does not conflict with any known title of a role or a group. For example, if there is a role called admin, you should not create a user with the user name admin.

    The password must have at least eight characters and must contain at least one number and one non-alphanumeric character (not including the character &).

    Make a note of the user name and password. You will need them to access Business Central and Process Server.

  5. When the installation has completed, you will see this message:

    Would you like to generate an automatic installation script and properties file?
  6. Enter y to create an XML file that contains the installation data, or n to complete the installation. If you enter y, you are prompted to specify a path for the XML file.
  7. Enter a path or press the Enter key to accept the suggested path.
  8. If you installed only Business Central, repeat these steps to install Process Server on a separate server.

4.3. Using the installer to configure Process Server with the Process Automation Manager controller

Process Server can be managed by the Process Automation Manager controller or it can be unmanaged. If Process Server is unmanaged, you must manually create and maintain KIE containers (deployment units). If Process Server is managed, the Process Automation Manager controller manages the Process Server configuration and you interact with the Process Automation Manager controller to create and maintain KIE containers.

The Process Automation Manager controller is integrated with Business Central. If you install Business Central, you can use the Execution Server page in Business Central to interact with the Process Automation Manager controller.

You can use the installer in interactive or CLI mode to install Business Central and Process Server, and then configure Process Server with the Process Automation Manager controller.

Note

If you do not install Business Central, see Chapter 9, Installing and running the headless Process Automation Manager controller for information about using the headless Process Automation Manager controller.

Prerequisites

  • Two computers with backed-up Red Hat JBoss EAP 7.1 or higher server installations are available.
  • Sufficient user permissions to complete the installation are granted.

Procedure

  1. On the first computer, run the installer in interactive mode or CLI mode. See one of the following sections for more information:

  2. On the Component Selection page, clear the Process Server box.
  3. Complete the Business Central installation.
  4. On the second computer, run the installer in interactive mode or CLI mode.
  5. On the Component Selection page, clear the Business Central box.
  6. On the Configure Runtime Environment page, select Perform Advanced Configuration.
  7. Select Customize Process Server properties and click Next.
  8. On the Process Server Properties Configuration page, click New Server Configuration to add a Process Server and specify a unique name for that Process Server. This name will appear in Business Central and enable you to distinguish between different Process Servers.

Chapter 5. Installing Red Hat Process Automation Manager from ZIP files

The Red Hat Process Automation Manager ZIP files (one for Business Central and one for Process Server) do not require a graphical user interface so you can install Red Hat Process Automation Manager using SSH.

Note

You should install Business Central and the Process Server on different servers in production environments.

For information about installing the headless Process Automation Manager controller, see Chapter 9, Installing and running the headless Process Automation Manager controller.

5.1. Installing Business Central from the ZIP file

Business Central is a web console that enables you to perform the following tasks over individual components in a unified web-based environment:

  • Create, manage, and edit your rules, processes, and related assets.
  • Manage connected Process Server instances and their KIE containers (deployment units).
  • Execute runtime operations against processes and tasks in Process Server instances connected to Business Central.

Prerequisites

  • A backed-up Red Hat JBoss EAP installation version 7.1 or higher is available. The base directory of the Red Hat JBoss EAP installation is referred to as EAP_HOME.
  • Sufficient user permissions to complete the installation are granted.
  • The following file is downloaded from the Red Hat Customer Portal:

    rhpam-7.1.0-business-central-eap7-deployable.zip

Procedure

  1. Extract the rhpam-7.1.0-business-central-eap7-deployable.zip file to a temporary directory. In the following examples this directory is called TEMP_DIR.
  2. Copy the contents of the TEMP_DIR/rhpam-7.1.0-business-central-eap7-deployable/jboss-eap-7.1 directory to EAP_HOME. When prompted, merge or replace files.

    Warning

    Ensure the names of the Red Hat Process Automation Manager deployments you are copying do not conflict with your existing deployments in the Red Hat JBoss EAP instance.

5.2. Installing Process Server from the ZIP file

Process Server provides the runtime environment for business assets and accesses the data stored in the assets repository (knowledge store).

Prerequisites

  • A backed-up Red Hat JBoss EAP installation version 7.1 or higher is available. The base directory of the Red Hat JBoss EAP installation is referred to as EAP_HOME.
  • Sufficient user permissions to complete the installation are granted.
  • The following file is downloaded from the Red Hat Customer Portal:

    rhpam-7.1.0-kie-server-ee7.zip

Procedure

  1. Extract the rhpam-7.1.0-kie-server-ee7.zip archive to a temporary directory. In the following examples this directory is called TEMP_DIR.
  2. Copy the TEMP_DIR/rhpam-7.1.0-kie-server-ee7/rhpam-7.1.0-kie-server-ee7/kie-server.war directory to EAP_HOME/standalone/deployments/.

    Warning

    Ensure the names of the Red Hat Process Automation Manager deployments you are copying do not conflict with your existing deployments in the Red Hat JBoss EAP instance.

  3. Copy the contents of the TEMP_DIR/rhpam-7.1.0-kie-server-ee7/rhpam-7.1.0-kie-server-ee7/SecurityPolicy/ to EAP_HOME/bin. When asked to overwrite files, click Replace.
  4. In the EAP_HOME/standalone/deployments/ directory, create an empty file named kie-server.war.dodeploy. This file ensures that Process Server is automatically deployed when the server starts.

5.3. Configuring JDBC data sources for Process Server

A data source is an object that enables a Java Database Connectivity (JDBC) client, such as an application server, to establish a connection with a database. Applications look up the data source on the Java Naming and Directory Interface (JNDI) tree or in the local application context and request a database connection to retrieve data. You must configure data sources for Process Server to ensure proper data exchange between the servers and the designated database.

Prerequisite

The JDBC providers that you want to use to create database connections are configured on all servers on which you want to deploy Process Server.

Procedure

  1. Open EAP_HOME/standalone/configuration/standalone-full.xml in a text editor and locate the <system-properties> tag.
  2. Add the following properties to the <system-properties> tag where <DATASOURCE> is the name of your data source and <HIBERNATE_DIALECT> is the hibernate dialect for your database.

    Note

    The default value of the org.kie.server.persistence.ds property is java:jboss/datasources/ExampleDS. The default value of the org.kie.server.persistence.dialect property is org.hibernate.dialect.H2Dialect.

    <property name="org.kie.server.persistence.ds" value="<DATASOURCE>"/>
    <property name="org.kie.server.persistence.dialect" value="<HIBERNATE_DIALECT>"/>

    For example:

    <system-properties>
        <property name="org.kie.server.repo" value="${jboss.server.data.dir}"/>
        <property name="org.kie.example" value="true"/>
        <property name="org.jbpm.designer.perspective" value="full"/>
        <property name="designerdataobjects" value="false"/>
        <property name="org.kie.server.user" value="rhpamUser"/>
        <property name="org.kie.server.pwd" value="rhpam123!"/>
        <property name="org.kie.server.location" value="http://localhost:8080/kie-server/services/rest/server"/>
        <property name="org.kie.server.controller" value="http://localhost:8080/business-central/rest/controller"/>
        <property name="org.kie.server.controller.user" value="kieserver"/>
        <property name="org.kie.server.controller.pwd" value="kieserver1!"/>
        <property name="org.kie.server.id" value="local-server-123"/>
    
        <!-- Data source properties. -->
        <property name="org.kie.server.persistence.ds" value="java:jboss/datasources/KieServerDS"/>
        <property name="org.kie.server.persistence.dialect" value="org.hibernate.dialect.PostgreSQLDialect"/>
    </system-properties>

The following dialects are supported:

  • DB2: org.hibernate.dialect.DB2Dialect
  • MSSQL: org.hibernate.dialect.SQLServer2012Dialect
  • MySQL: org.hibernate.dialect.MySQL5InnoDBDialect
  • MariaDB: org.hibernate.dialect.MySQL5InnoDBDialect
  • Oracle: org.hibernate.dialect.Oracle10gDialect
  • PostgreSQL: org.hibernate.dialect.PostgreSQL82Dialect
  • PostgreSQL plus: org.hibernate.dialect.PostgresPlusDialect
  • Sybase: org.hibernate.dialect.SybaseASE157Dialect

5.4. Creating users

Before you can log in to Business Central or Process Server, you must create users. This section shows you how to create a Business Central user with the admin, rest-all, and kie-server roles and a Process Server user that has the kie-server role. For information about roles, see Chapter 2, Roles and users.

Prerequisites

Red Hat Process Automation Manager is installed in the base directory of the Red Hat JBoss EAP installation (EAP_HOME) as described in Chapter 5, Installing Red Hat Process Automation Manager from ZIP files.

Procedure

  1. In a terminal application, navigate to the EAP_HOME/bin directory.
  2. Create a user with the admin role that you will use to log in to Business Central. In the following command, replace <username> and <password> with the user name and password of your choice.

    $ ./add-user.sh -a --user <USERNAME> --password <PASSWORD> --role admin,rest-all
    Note

    Make sure that the specified user name is not the same as an existing user, role, or group. For example, do not create a user with the user name admin.

    The password must have at least eight characters and must contain at least one number and one non-alphanumeric character, but not & (ampersand).

  3. Create a user with the kie-server role that you will use to log in to Process Server.

    $ ./add-user.sh -a --user <USERNAME> --password <PASSWORD> --role kie-server
  4. Make a note of your user names and passwords.

    Note

    If you installed Business Central and Process Server in the same server instance, you can create a single user that has both of these roles:

    $ ./add-user.sh -a --user <USERNAME>  --password <PASSWORD> --role admin,rest-all,kie-server

    You should install Business Central and Process Server on different servers in production environments.

5.5. Configuring Process Server with the integrated Process Automation Manager controller

Note

Only make the changes described in this section if Process Server will be managed by Business Central and you installed Red Hat Process Automation Manager from the ZIP files. If you did not install Business Central, you can use the headless Process Automation Manager controller to manage Process Server, as described in Chapter 9, Installing and running the headless Process Automation Manager controller.

Process Server can be managed or it can be unmanaged. If Process Server is unmanaged, you must manually create and maintain KIE containers (deployment units). If Process Server is managed, the Process Automation Manager controller manages the Process Server configuration and you interact with the Process Automation Manager controller to create and maintain KIE containers.

The Process Automation Manager controller is integrated with Business Central. If you install Business Central, you can use the Execution Server page in Business Central to interact with the Process Automation Manager controller.

If you installed Red Hat Process Automation Manager from the ZIP files, you must edit the standalone-full.xml file in both the Process Server and Business Central installations to configure Process Server with the integrated Process Automation Manager controller.

Prerequisites

Procedure

  1. In the Business Central EAP_HOME/standalone/configuration/standalone-full.xml file, uncomment the following properties in the <system-properties> section and replace <USERNAME> and <USER_PWD> with the credentials of a user with the kie-server role:

       <property name="org.kie.server.user" value="<USERNAME>"/>
       <property name="org.kie.server.pwd" value="<USER_PWD>"/>
  2. In the Process Server EAP_HOME/standalone/configuration/standalone-full.xml file, uncomment the following properties in the <system-properties> section.

      <property name="org.kie.server.controller.user" value="<CONTROLLER_USER>"/>
      <property name="org.kie.server.controller.pwd" value="<CONTROLLER_PWD>"/>
      <property name="org.kie.server.id" value="<KIE_SERVER_ID>"/>
      <property name="org.kie.server.location" value="http://<HOST>:<PORT>/kie-server/services/rest/server"/>
      <property name="org.kie.server.controller" value="<CONTROLLER_URL>"/>
  3. Replace the following values:

    • Replace <CONTROLLER_USER> and <CONTROLLER_PWD> with the credentials of a user with the rest-all role.
    • Replace <KIE_SERVER_ID> with the ID or name of the Process Server installation, for example, rhpam-7.1.0-process_server-1.
    • Replace <HOST> with the ID or name of the Process Server host, for example, localhost or 192.7.8.9.
    • Replace <PORT> with the port of the Process Server host, for example, 8080.

      Note

      The org.kie.server.location property specifies the location of Process Server.

    • Replace <CONTROLLER_URL> with the URL of Business Central. Process Server connects to this URL during startup.

      • If you installed Business Central using the installer or Red Hat JBoss EAP zip installations, <CONTROLLER_URL> has this format:

        http://<HOST>:<PORT>/business-central/rest/controller

      • If you are running Business Central using the standalone.jar file, <CONTROLLER_URL> has this format:

        http://<HOST>:<PORT>/rest/controller

Chapter 6. Configuring SSH to use RSA

SSH is used to clone Git repositories. By default, the DSA encryption algorithm is provided by Business Central. However, some SSH clients, for example SSH clients in the Fedora 23 environment, use the RSA algorithm instead of the DSA algorithm. Business Central contains a system property that you can use to switch from DSA to RSA if required.

Note

SSH clients on supported configurations, for example Red Hat Enterprise Linux 7, are not affected by this issue. For a list of supported configurations, see Red Hat Process Automation Manager 7 Supported Configurations.

Procedure

Complete one of the following tasks to enable this system property:

  • Modify the ~/.ssh/config file on client side as follows to force the SSH client to accept the deprecated DSA algorithm:

    Host <SERVER_IP>
           HostKeyAlgorithms +ssh-dss
  • Include the -Dorg.uberfire.nio.git.ssh.algorithm=RSA parameter when you start Business Central, for example:

    $ ./standalone.sh -c standalone-full.xml
    -Dorg.uberfire.nio.git.ssh.algorithm=RSA

Chapter 7. Verifying the Red Hat Process Automation Manager installation

After you have installed Red Hat Process Automation Manager, create an asset to verify that the installation is working.

Procedure

  1. In a terminal window, navigate to the EAP_HOME/bin directory and enter the following command to start Red Hat Process Automation Manager:

    ./standalone.sh -c standalone-full.xml
    Note

    If you deployed Business Central without Process Server, you can start Business Central with the standalone.sh script without specifying the standalone-full.xml file. In this case, ensure that you make any configuration changes to the standalone.xml file before starting Business Central.

  2. In a web browser, enter localhost:8080/business-central.

    • If Red Hat Process Automation Manager has been configured to run from a domain name, replace localhost with the domain name, for example:

      http://www.example.com:8080/business-central

    • If Red Hat Process Automation Manager has been configured to run in a cluster, replace localhost with the IP address of a particular node, for example:

      http://<node_IP_address>:8080/business-central

  3. Enter the admin user credentials that you created during installation. The Business Central home page appears.
  4. Select MenuDeployExecution Servers.
  5. Confirm that default-kieserver is listed under Server Configurations.
  6. Select MenuDesignProjects.
  7. Click Try SamplesMortgagesOK. The Assets window appears.
  8. Click Create New AssetData Object.
  9. Enter MyDataObject in the Data Object field and click OK.
  10. Click SpacesMySpaceMortgages and confirm that MyDataObject is in the list of assets.
  11. Delete the Mortgages project.

Chapter 8. Running Red Hat Process Automation Manager

Use this procedure to run the Red Hat Process Automation Manager on Red Hat JBoss EAP in standalone mode.

Prerequisite

Red Hat Process Automation Manager is installed and configured.

Procedure

  1. In a terminal application, navigate to EAP_HOME/bin.
  2. Run the standalone configuration:

    • On Linux or UNIX-based systems:

      $ ./standalone.sh -c standalone-full.xml
    • On Windows:

      standalone.bat -c standalone-full.xml
      Note

      If you deployed Business Central without Process Server, you can start Business Central with the standalone.sh script without specifying the standalone-full.xml file. In this case, ensure that you make any configuration changes to the standalone.xml file before starting Business Central.

      On Linux or UNIX-based systems:

      $ /standalone.sh

      On Windows:

      standalone.bat
  3. In a web browser, open the URL localhost:8080/business-central.
  4. Log in using the credentials of the user that you created for Business Central in Section 5.4, “Creating users”.

Chapter 9. Installing and running the headless Process Automation Manager controller

You can configure Process Server to run in managed or unmanaged mode. If Process Server is unmanaged, you must manually create and maintain KIE containers (deployment units). If Process Server is managed, the Process Automation Manager controller manages the Process Server configuration and you interact with the Process Automation Manager controller to create and maintain KIE containers.

Business Central has an embedded Process Automation Manager controller. If you install Business Central, use the Execution Server page to create and maintain KIE containers. If you want to automate Process Server management without Business Central, you can use the headless Process Automation Manager controller.

9.1. Installing the headless Process Automation Manager controller

You can install the headless Process Automation Manager controller and use the REST API or the Process Server Java Client API to interact with it.

Prerequisites

  • A backed-up Red Hat JBoss EAP installation version 7.1 or higher is available. The base directory of the Red Hat JBoss EAP installation is referred to as EAP_HOME.
  • Sufficient user permissions to complete the installation are granted.

Procedure

  1. Navigate to the Software Downloads page in the Red Hat Customer Portal (login required), and select the product and version from the drop-down options:

    • Product: Process Automation Manager
    • Version: 7.1
  2. Download Red Hat Process Automation Manager 7.1.0 Add Ons (the rhpam-7.1.0-add-ons.zip file).
  3. Unzip the rhpam-7.1.0-add-ons.zip file. The rhpam-7.1-controller-ee7.zip file is in the unzipped directory.
  4. Extract the rhpam-7.1-controller-ee7 archive to a temporary directory. In the following examples this directory is called TEMP_DIR.
  5. Copy the TEMP_DIR/rhpam-7.1-controller-ee7/controller.war directory to EAP_HOME/standalone/deployments/.

    Warning

    Ensure that the names of the headless Process Automation Manager controller deployments you are copying do not conflict with your existing deployments in the Red Hat JBoss EAP instance.

  6. Copy the contents of the TEMP_DIR/rhpam-7.1-controller-ee7/SecurityPolicy/ directory to EAP_HOME/bin. When asked to overwrite files, select Yes.
  7. In the EAP_HOME/standalone/deployments/ directory, create an empty file named controller.war.dodeploy. This file ensures that the headless Process Automation Manager controller is automatically deployed when the server starts.

9.1.1. Creating a headless Process Automation Manager controller user

Before you can use the headless Process Automation Manager controller, you must create a user that has the kie-server role.

Prerequisite

The headless Process Automation Manager controller is installed in the base directory of the Red Hat JBoss EAP installation (EAP_HOME).

Procedure

  1. In a terminal application, navigate to the EAP_HOME/bin directory.
  2. Enter the following command and replace <USER_NAME> and <PASSWORD> with the user name and password of your choice.

    $ ./add-user.sh -a --user <USER_NAME> --password <PASSWORD> --role kie-server
    Note

    Make sure that the specified user name is not the same as an existing user, role, or group. For example, do not create a user with the user name admin.

    The password must have at least eight characters and must contain at least one number and one non-alphanumeric character, but not & (ampersand).

  3. Make a note of your user name and password.

9.1.2. Configuring Process Server and the headless Process Automation Manager controller

If Process Server will be managed by the headless Process Automation Manager controller, you must edit the standalone-full.xml file in Process Server installation and the standalone.xml file in the headless Process Automation Manager controller installation, as described in this section.

Prerequisites

  • Process Server is installed in the base directory of the Red Hat JBoss EAP installation (EAP_HOME) as described in Chapter 5, Installing Red Hat Process Automation Manager from ZIP files section.
  • The headless Process Automation Manager controller is installed in an EAP_HOME.

    Note

    You should install Process Server and the headless Process Automation Manager controller on different servers in production environments. However, if you install Process Server and the headless Process Automation Manager controller on the same server, for example in a development environment, make these changes in the shared standalone-full.xml file.

  • On Process Server nodes, a user with the kie-server role exists.
  • On the server nodes, a user with the kie-server role exists.

    For more information, see Section 5.4, “Creating users”.

Procedure

  1. In the EAP_HOME/standalone/configuration/standalone-full.xml file, add the following properties to the <system-properties> section and replace <USERNAME> and <USER_PWD> with the credentials of a user with the kie-server role:

       <property name="org.kie.server.user" value="<USERNAME>"/>
       <property name="org.kie.server.pwd" value="<USER_PWD>"/>
  2. In the Process Server EAP_HOME/standalone/configuration/standalone-full.xml file, add the following properties to the <system-properties> section:

      <property name="org.kie.server.controller.user" value="<CONTROLLER_USER>"/>
      <property name="org.kie.server.controller.pwd" value="<CONTROLLER_PWD>"/>
      <property name="org.kie.server.id" value="<KIE_SERVER_ID>"/>
      <property name="org.kie.server.location" value="http://<HOST>:<PORT>/kie-server/services/rest/server"/>
      <property name="org.kie.server.controller" value="<CONTROLLER_URL>"/>
  3. In this file, replace the following values:

    • Replace <CONTROLLER_USER> and <CONTROLLER_PWD> with the credentials of a user with the kie-server role.
    • Replace <KIE_SERVER_ID> with the ID or name of the Process Server installation, for example, rhpam-7.1.0-process_server-1.
    • Replace <HOST> with the ID or name of the Process Server host, for example, localhost or 192.7.8.9.
    • Replace <PORT> with the port of the Process Server host, for example, 8080.

      Note

      The org.kie.server.location property specifies the location of Process Server.

    • Replace <CONTROLLER_URL> with the URL of the headless Process Automation Manager controller.
  4. Process Server connects to this URL during startup.

9.2. Running the headless Process Automation Manager controller

After you have installed the headless Process Automation Manager controller on Red Hat JBoss EAP, use this procedure to run the headless Process Automation Manager controller.

Prerequisite

The headless Process Automation Manager controller is installed and configured in the base directory of the Red Hat JBoss EAP installation (EAP_HOME).

Procedure

  1. In a terminal application, navigate to EAP_HOME/bin.
  2. Enter the following command:

    • On Linux or UNIX-based systems:

      $ ./standalone.sh
    • On Windows:

      standalone.bat
  3. To verify that the headless Process Automation Manager controller is working on Red Hat JBoss EAP, enter the following command where <CONTROLLER> and <CONTROLLER_PWD> is the user name and password combination that you created in Section 9.1.1, “Creating a headless Process Automation Manager controller user”. The output of this command provides information about the Process Server instance.

    curl -X GET "http://<HOST>:<PORT>/controller/rest/controller/management/servers" -H  "accept: application/xml" -u '<CONTROLLER>:<CONTROLLER_PWD>'
Note

Alternatively, you can use the Process Server Java API Client to access the headless Process Automation Manager controller.

Chapter 10. Running standalone Business Central

You can use the Business Central standalone JAR file to run Business Central without needing to deploy it to an application server such as Red Hat JBoss EAP.

Note

Red Hat supports this installation type only when it is installed on Red Hat Enterprise Linux.

Procedure

  1. Navigate to the Software Downloads page in the Red Hat Customer Portal (login required), and select the product and version from the drop-down options:

    • Product: Process Automation Manager
    • Version: 7.1
  2. Download Red Hat Process Automation Manager 7.1 Business Central Standalone (rhpam-7.1.0-business-central-standalone.jar).
  3. Create a directory and move the rhpam-7.1.0-business-central-standalone.jar file to this directory.
  4. In a terminal window, navigate to the directory that contains the standalone JAR file.
  5. Create the application-users.properties file. Include an administrative user and if this Business Central instance will be a Process Automation Manager controller for Process Server, include a Process Automation Manager controller user, for example:

    rhpamAdmin=password1
    controllerUser=controllerUser1234
  6. Create the application-roles.properties file to assign roles to the users that you included in the application-users.properties file, for example:

    rhpamAdmin=admin
    controllerUser=kie-server
  7. Create the application-config.yaml configuration file with the following contents, where <APPLICATION_USERS> is the path to the application-users.properties file and <APPLICATION_ROLES> is the path to the application-roles.properties file:

    swarm:
      security:
        security-domains:
          other:
            classic-authentication:
              login-modules:
                myloginmodule:
                  code: org.kie.security.jaas.KieLoginModule
                  flag: optional
                  module: deployment.kie-wb-webapp.war
      management:
        security-realms:
          ApplicationRealm:
            local-authentication:
              default-user: local
              allowed-users: local
              skip-group-loading: true
            properties-authentication:
              path: <APPLICATION_USERS>
              plain-text: true
            properties-authorization:
              path: <APPLICATION_ROLES>
    datasource:
      management:
        wildfly:
          admin: admin
  8. Enter the following command:

    java -jar rhpam-7.1.0-business-central-standalone.jar -s application-config.yaml

    In addition, you can set any properties supported by Business Central by including the -D<property>=<value> parameter in this command, for example:

    java -jar rhpam-7.1.0-business-central-standalone.jar -s application-config.yaml -D<property>=<value> -D<property>=<value>

    See Section 10.1, “Supported properties” for more information.

10.1. Supported properties

The Business Central system properties listed in this section are passed to standalone*.xml files or when you install standalone Business Central, you can use the properties listed in this section in the following command:

java -jar rhpam-7.1.0-business-central-standalone.jar -s application-config.yaml -D<property>=<value> -D<property>=<value>

In this command, <property> is a property from the following list and <value> is a value that you assign to that property:

  • org.uberfire.nio.git.dir: Location of the Process Server Git directory.
  • org.uberfire.nio.git.dirname: Name of the Process Server Git directory. Default value: .niogit.
  • org.uberfire.nio.git.proxy.ssh.over.http: Specifies whether SSH should use an HTTP proxy. Default: false
  • http.proxyHost: Defines the host name of the HTTP proxy. Default: null
  • http.proxyPort: Defines the host port (integer value) of the HTTP proxy. Default: null
  • org.uberfire.nio.git.proxy.ssh.over.https: Specifies whether SSH should use an HTTPS proxy. Default: false
  • https.proxyHost: Defines the host name of the HTTPS proxy. Default: null
  • https.proxyPort: Defines the host port (integer value) of the HTTPS proxy. Default: null
  • org.uberfire.nio.git.daemon.enabled: Enables or disables the Git daemon. Default value: true.
  • org.uberfire.nio.git.daemon.host: If the Git daemon is enabled, it uses this property as the local host identifier. Default value: localhost.
  • org.uberfire.nio.git.daemon.port: If the Git daemon is enabled, it uses this property as the port number. Default value: 9418.
  • org.uberfire.nio.git.ssh.enabled: Enables or disables the SSH daemon. Default value: true.
  • org.uberfire.nio.git.ssh.host: If the SSH daemon enabled, it uses this property as the local host identifier. Default value: localhost.
  • org.uberfire.nio.git.ssh.port: If the SSH daemon is enabled, it uses this property as the port number. Default value: 8001.
  • org.uberfire.nio.git.ssh.cert.dir: Location of the .security directory where local certificates are stored. Default: the working directory.
  • org.uberfire.nio.git.ssh.passphrase: Pass phrase used to access the public key store of your operating system when cloning git repositories with SCP style URLs. Example: git@github.com:user/repository.git.
  • org.uberfire.nio.git.ssh.algorithm: Algorithm used by SSH. Default value: RSA.

    Note

    If you plan to use RSA or any algorithm other than DSA, make sure you set up your application server to use the Bouncy Castle JCE library.

  • org.uberfire.metadata.index.dir: Place where the Lucene .index directory is stored. Default: the working directory
  • org.uberfire.ldap.regex.role_mapper: Regex pattern used to map LDAP principal names to the application role name. Note that the variable role must be part of the pattern because it is substituted by the application role name when matching a principal value to a role name. Default: Not used.
  • org.uberfire.sys.repo.monitor.disabled: Disables the configuration monitor. Do not disable unless you are sure. Default value: false
  • org.uberfire.secure.key: Password used by password encryption. Default value: org.uberfire.admin
  • org.uberfire.secure.alg: Crypto algorithm used by password encryption. Default value: PBEWithMD5AndDES
  • org.uberfire.domain: Security-domain name used by uberfire. Default value: ApplicationRealm
  • org.guvnor.m2repo.dir: Place where the Maven repository folder is stored. Default value: <working-directory>/repositories/kie
  • org.guvnor.project.gav.check.disabled: Disables group ID, artifact ID, and version (GAV) checks. Default value: false
  • org.kie.build.disable-project-explorer: Disables automatic build of a selected project in Project Explorer. Default value: false
  • org.kie.verification.disable-dtable-realtime-verification: Disables the real-time validation and verification of decision tables. Default value: false
  • org.kie.server.controller: URL for connecting with a Process Automation Manager controller, for example: ws://localhost:8080/business-central/websocket/controller
  • org.kie.server.user: User name used to connect with the Process Server nodes from the Process Automation Manager controller. This property is only required when using this Business Central installation as a Process Automation Manager controller.
  • org.kie.server.pwd: Password used to connect with the Process Server nodes from the Process Automation Manager controller. This property is only required when using this Business Central installation as a Process Automation Manager controller.

    Note

    Use this property for Business Central only. If you share a runtime environment with any other component, isolate the configuration and apply it only to Business Central.

  • org.uberfire.gzip.enable: Enables or disables Gzip compression on GzipFilter. Default: true

Chapter 11. Maven settings and repositories for Red Hat Process Automation Manager

You can use an external Maven repository to deploy a project. When you create a project, Business Central uses the Maven repositories that are configured for Business Central. You can use the Maven global or user settings to direct all Red Hat Process Automation Manager projects to retrieve dependencies from the public Red Hat Process Automation Manager repository by modifying the following files:

  • The Maven settings.xml file.
  • The Maven project object model (POM) file (pom.xml).

For more information, see Packaging and deploying a Red Hat Process Automation Manager project.

11.1. Adding Maven dependencies for Red Hat Process Automation Manager

To use the correct Maven dependencies in your Red Hat Process Automation Manager project, add the Red Hat Business Automation bill of materials (BOM) files to the project’s pom.xml file. The Red Hat Business Automation BOM applies to both Red Hat Decision Manager and Red Hat Process Automation Manager. When you add the BOM files, the correct versions of transitive dependencies from the provided Maven repositories are included in the project.

For more information about the Red Hat Business Automation BOM, see What is the mapping between Red Hat Process Automation Manager and the Maven library version?.

Procedure

  1. Declare the Red Hat Business Automation BOM in the pom.xml file:

    <dependencyManagement>
     <dependencies>
      <dependency>
       <groupId>com.redhat.ba</groupId>
       <artifactId>ba-platform-bom</artifactId>
       <version>7.1.0.GA-redhat-00002</version>
       <type>pom</type>
       <scope>import</scope>
      </dependency>
     </dependencies>
    </dependencyManagement>
    <dependencies>
    <!-- Your dependencies -->
    </dependencies>
  2. Declare dependencies required for your project in the <dependencies> tag. After you import the product BOM into your project, the versions of the user-facing product dependencies are defined so you do not need to specify the <version> sub-element of these <dependency> elements. However, you must use the <dependency> element to declare dependencies which you want to use in your project.
  3. For standalone projects that are not authored in Business Central, specify all dependencies required for your projects. In projects that you author in Business Central, the basic process engine dependencies are provided automatically by Business Central.

    • For a basic Red Hat Process Automation Manager project, declare the following dependencies, depending on the features that you want to use:

      Embedded process engine dependencies

      <!-- Public KIE API -->
      <dependency>
        <groupId>org.kie</groupId>
        <artifactId>kie-api</artifactId>
      </dependency>
      
      <!-- Core dependencies for process engine -->
      <dependency>
        <groupId>org.jbpm</groupId>
        <artifactId>jbpm-flow</artifactId>
      </dependency>
      
      <dependency>
        <artifactId>jbpm-flow-builder</artifactId>
      </dependency>
      
      <dependency>
        <groupId>org.jbpm</groupId>
        <artifactId>jbpm-bpmn2</artifactId>
      </dependency>
      
      <dependency>
        <groupId>org.jbpm</groupId>
        <artifactId>jbpm-runtime-manager</artifactId>
      </dependency>
      
      <dependency>
        <groupId>org.jbpm</groupId>
        <artifactId>jbpm-persistence-jpa</artifactId>
      </dependency>
      
      <dependency>
        <groupId>org.jbpm</groupId>
        <artifactId>jbpm-query-jpa</artifactId>
      </dependency>
      
      <dependency>
        <groupId>org.jbpm</groupId>
        <artifactId>jbpm-audit</artifactId>
      </dependency>
      
      <dependency>
        <groupId>org.jbpm</groupId>
        <artifactId>jbpm-kie-services</artifactId>
      </dependency>
      
      <!-- Dependency needed for default WorkItemHandler implementations. -->
      <dependency>
        <groupId>org.jbpm</groupId>
        <artifactId>jbpm-workitems-core</artifactId>
      </dependency>
      
      <!-- Logging dependency. You can use any logging framework compatible with slf4j. -->
      <dependency>
        <groupId>ch.qos.logback</groupId>
        <artifactId>logback-classic</artifactId>
        <version>${logback.version}</version>
      </dependency>

    • For a Red Hat Process Automation Manager project that uses CDI, you typically declare the following dependencies:

      CDI-enabled process engine dependencies

      <dependency>
        <groupId>org.kie</groupId>
        <artifactId>kie-api</artifactId>
      </dependency>
      
      <dependency>
        <groupId>org.jbpm</groupId>
        <artifactId>jbpm-kie-services</artifactId>
      </dependency>
      
      <dependency>
        <groupId>org.jbpm</groupId>
        <artifactId>jbpm-services-cdi</artifactId>
      </dependency>

    • For a basic Red Hat Process Automation Manager project, declare the following dependencies:

      Embedded process engine dependencies

      <dependency>
        <groupId>org.drools</groupId>
        <artifactId>drools-compiler</artifactId>
      </dependency>
      
      <!-- Dependency for persistence support. -->
      <dependency>
        <groupId>org.drools</groupId>
        <artifactId>drools-persistence-jpa</artifactId>
      </dependency>
      
      <!-- Dependencies for decision tables, templates, and scorecards.
      For other assets, declare org.drools:drools-workbench-models-* dependencies. -->
      <dependency>
        <groupId>org.drools</groupId>
        <artifactId>drools-decisiontables</artifactId>
      </dependency>
      <dependency>
        <groupId>org.drools</groupId>
        <artifactId>drools-templates</artifactId>
      </dependency>
      <dependency>
        <groupId>org.drools</groupId>
        <artifactId>drools-scorecards</artifactId>
      </dependency>
      
      <!-- Dependency for loading KJARs from a Maven repository using KieScanner. -->
      <dependency>
        <groupId>org.kie</groupId>
        <artifactId>kie-ci</artifactId>
      </dependency>

    • To use the Process Server, declare the following dependencies:

      Client application Process Server dependencies

      <dependency>
        <groupId>org.kie.server</groupId>
        <artifactId>kie-server-client</artifactId>
      </dependency>

    • To create a remote client for Red Hat Process Automation Manager, declare the following dependency:

      Client dependency

      <dependency>
        <groupId>org.uberfire</groupId>
      </dependency>

    • When creating a JAR file that includes assets, such as rules and process definitions, specify the packaging type for your Maven project as kjar and use org.kie:kie-maven-plugin to process the kjar packaging type located under the <project> element. In the following example, ${kie.version} is the Maven library version listed in What is the mapping between Red Hat Process Automation Manager and the Maven library version?:

      <packaging>kjar</packaging>
      <build>
       <plugins>
        <plugin>
         <groupId>org.kie</groupId>
         <artifactId>kie-maven-plugin</artifactId>
         <version>${kie.version}</version>
         <extensions>true</extensions>
        </plugin>
       </plugins>
      </build>

11.2. Configuring an external Maven repository for Business Central and Process Server

You can configure Business Central and Process Server to use an external Maven repository, such as Nexus or Artifactory, instead of the built-in repository. This enables Business Central and Process Server to access and download artifacts that are maintained in the external Maven repository.

Important

"Artifacts in the repository do not receive automated security patches as Maven requires that artifacts be immutable. As a result, artifacts that are missing patches for known security flaws will remain in the repository to avoid breaking builds that depend on them. Patched artifacts have their version number incremented". For more information, see JBoss Enterprise Maven Repository.

Note

For information about configuring an external Maven repository for an authoring environment on Red Hat OpenShift Container Platform, see Deploying a Red Hat Process Automation Manager authoring environment on Red Hat OpenShift Container Platform.

Prerequisite

Business Central and Process Server are installed. For installation options, see Planning a Red Hat Process Automation Manager installation.

Procedure

  1. Create a Maven settings.xml file with connection and access details for your external repository. For details about the settings.xml file, see the Maven Settings Reference.
  2. Save the file in a known location, for example, /opt/custom-config/settings.xml.
  3. In your Red Hat Process Automation Manager installation directory, navigate to the standalone-full.xml file. For example, if you use a Red Hat JBoss EAP installation for Red Hat Process Automation Manager, go to $EAP_HOME/standalone/configuration/standalone-full.xml.
  4. Open standalone-full.xml and under the <system-properties> tag, set the kie.maven.settings.custom property to the full path name of the settings.xml file.

    For example:

    <property name="kie.maven.settings.custom" value="/opt/custom-config/settings.xml"/>
  5. Start or restart Business Central and Process Server.

Next steps

For each Business Central project that you want to export or push as a KJAR artifact to the external Maven repository, you must add the repository information in the project pom.xml file. For instructions, see Packaging and deploying a Red Hat Process Automation Manager project.

Chapter 12. Importing projects from Git repositories

Git is a distributed version control system. It implements revisions as commit objects. When you save your changes to a repository, a new commit object in the Git repository is created.

Business Central uses Git to store project data, including assets such as rules and processes. When you create a project in Business Central, it is added to a Git repository that is embedded in Business Central. If you have projects in other Git repositories, you can import those projects into the Business Central Git repository through Business Central spaces.

Prerequisites

  • Red Hat Process Automation Manager projects exist in an external Git repository.
  • Credentials required for read access to that external Git repository are available.

Procedure

  1. In Business Central, click MenuDesignProjects.
  2. Select or create the space into which you want to import the projects. The default space is mySpace.
  3. Click the three vertical dots on the right side of the screen and select Import Project.
  4. In the Import Project window, enter the URL and credentials for the Git repository that contains the projects that you want to import and click Import. The projects are added to the Business Central Git repository and are available from the current space.

Chapter 13. Verifying the Red Hat Process Automation Manager installation

After you have installed Red Hat Process Automation Manager, create an asset to verify that the installation is working.

Procedure

  1. In a terminal window, navigate to the EAP_HOME/bin directory and enter the following command to start Red Hat Process Automation Manager:

    ./standalone.sh -c standalone-full.xml
    Note

    If you deployed Business Central without Process Server, you can start Business Central with the standalone.sh script without specifying the standalone-full.xml file. In this case, ensure that you make any configuration changes to the standalone.xml file before starting Business Central.

  2. In a web browser, enter localhost:8080/business-central.

    • If Red Hat Process Automation Manager has been configured to run from a domain name, replace localhost with the domain name, for example:

      http://www.example.com:8080/business-central

    • If Red Hat Process Automation Manager has been configured to run in a cluster, replace localhost with the IP address of a particular node, for example:

      http://<node_IP_address>:8080/business-central

  3. Enter the admin user credentials that you created during installation. The Business Central home page appears.
  4. Select MenuDeployExecution Servers.
  5. Confirm that default-kieserver is listed under Server Configurations.
  6. Select MenuDesignProjects.
  7. Click Try SamplesMortgagesOK. The Assets window appears.
  8. Click Add AssetData Object.
  9. Enter MyDataObject in the Data Object field and click OK.
  10. Click SpacesMySpaceMortgages and confirm that MyDataObject is in the list of assets.
  11. Delete the Mortgages project.

Chapter 14. Customizing Business Central

You can customize the Business Central login page and application header.

14.1. Customizing the Business Central login page

You can customize the company logo and the project logo on the Business Central login page.

Procedure

  1. Start Red Hat JBoss EAP and open Business Central in a web browser.
  2. Copy a PNG format image to the EAP_HOME/standalone/deployments/business-central.war/img/ directory in your Red Hat Process Automation Manager installation.
  3. In the EAP_HOME/standalone/deployments/business-central.war/img/ directory, either move or rename the existing login-screen-logo.png file.
  4. Rename your PNG file login-screen-logo.png.
  5. To change the project logo that appears above the User name and Password fields, replace the default image RHPAM_Logo.svg with a new SVG file.
  6. Force a full reload of the login page, bypassing the cache, to view the changes. For example, in most Linux and Windows web browsers, press Ctrl+F5.

14.2. Customizing Business Central application header

You can customize the Business Central application header.

Procedure

  1. Start Red Hat JBoss EAP, open Business Central in a web browser, and log in with your user credentials.
  2. Copy your new application header image in the SVG format to the EAP_HOME/standalone/deployments/business-central.war/banner/ directory in your Red Hat Process Automation Manager installation.
  3. Open the EAP_HOME/standalone/deployments/business-central.war/banner/banner.html file in a text editor.
  4. Replace logo.svg in the <img> tag with the file name of your new image:admin-and-config/

    <img src="banner/logo.svg"/>
  5. Force a full reload of the login page, bypassing the cache, to view the changes. For example, in most Linux and Windows web browsers, press Ctrl+F5.

Chapter 15. Integrating LDAP and SSL

With Red Hat Process Automation Manager you can integrate LDAP and SSL through RH-SSO. For more information, see the Red Hat Single Sign-On Server Administration Guide.

Chapter 16. Additional resources

Chapter 17. Next steps

Appendix A. Versioning information

Documentation last updated on Wednesday, July 15, 2020.

Legal Notice

Copyright © 2020 Red Hat, Inc.
The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, the Red Hat logo, JBoss, OpenShift, Fedora, the Infinity logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
Java® is a registered trademark of Oracle and/or its affiliates.
XFS® is a trademark of Silicon Graphics International Corp. or its subsidiaries in the United States and/or other countries.
MySQL® is a registered trademark of MySQL AB in the United States, the European Union and other countries.
Node.js® is an official trademark of Joyent. Red Hat is not formally related to or endorsed by the official Joyent Node.js open source or commercial project.
The OpenStack® Word Mark and OpenStack logo are either registered trademarks/service marks or trademarks/service marks of the OpenStack Foundation, in the United States and other countries and are used with the OpenStack Foundation's permission. We are not affiliated with, endorsed or sponsored by the OpenStack Foundation, or the OpenStack community.
All other trademarks are the property of their respective owners.
Red Hat logoGithubRedditYoutubeTwitter

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

© 2024 Red Hat, Inc.