Hammer CLI ガイド
Satellite の CLI ツール、Hammer の使用ガイド
概要
第1章 Hammer の概要
Hammer は、Red Hat Satellite 6 で提供される強力なコマンドラインツールです。Hammer を使用して、CLI コマンド、またはシェルスクリプトによる自動化により、Red Hat Satellite Server を設定/管理することができます。Hammer は対話式のシェルも提供します。
Hammer と Satellite Web UI の比較
Web UI の操作感と比較すると、Hammer を使用する場合には環境変数やエイリアスなどのシェル機能が自由に使えるため、Satellite Server との対話がはるかに速くなります。また、Hammer のコマンドを再利用可能なスクリプトに組み込み、あらゆるレベルで複雑なタスクを自動化することもできます。Hammer コマンドからの出力を他のツールにリダイレクトして、既存の環境と統合することができます。Hammer コマンドは、Red Hat Satellite を稼働するベースオペレーティングシステムで直接実行できます。
Hammer コマンドを発行するには、Satellite Server のベースのオペレーティングシステムにアクセスする必要があるため、Web UI と比較すると、潜在的なユーザー数が限定されてしまいます。Hammer と Web UI の違いはほぼありませんが、Web UI の開発の優先度は高く、特に新しく導入される機能についてはこちらが優先されることがあります。
Hammer と Satellite API の比較
多くのタスクで、Hammer も Satellite API も同等に利用可能です。Hammer は、スクリプトに適用する前に API の呼び出しの応答をテストするなど、Satellite API よりも使いやすいインターフェイスとして利用できます (hammer -d organization list
など、Hammer で発行した API の呼び出しを検査するには -d
オプションを使用します)。API での変更は自動的に Hammer に適用されますが、API を直接使用するスクリプトは手動で更新する必要があります。
バックグラウンドで、各 Hammer コマンドは最初に API へのバインドを確立し、要求を送信します。この動作は、大量の Hammer コマンドを順に実行する場合に、パフォーマンスに影響を与える可能性があります。反対に、API で直接通信するスクリプトではバインドを確立するのは一度で済みます。詳細は、API ガイド を参照してください。
1.1. ヘルプ
hammer
オプションおよびサブコマンドの完全な一覧を表示するには以下を実行します。
$ hammer --help
以下のように --help
を使用してサブコマンドを確認します。
$ hammer organization --help
以下のように grep
を使用して help の出力を検索するか、テキストビューワーにリダイレクトすることができます。
$ hammer | less
1.2. 認証
hammer コマンドを使用する場合は Red Hat Satellite に ID を証明する必要があります。hammer コマンドは手動または自動で実行できます。いずれの場合も、認証には Satellite 認証情報が必要です。hammer 認証には 3 つの方法があります。
- Hammer 認証セッション
- hammer 設定ファイルに認証情報を保存
- hammer コマンドを使用するたびに認証情報を指定
自動でコマンドを実行する場合は、hammer 設定ファイルを使用することが推奨されます。たとえば、cron ジョブから Satellite メンテナーンスコマンドを実行する場合です。コマンドを手動で実行する場合は、Red Hat は、hammer 認証セッションを使用して、コマンドを実行するたびに認証情報を提供する方法を推奨します。
1.2.1. Hammer 認証セッション
Hammer 認証セッションでは、認証情報をキャッシュで保存するので、セッションの最初に一度だけ認証情報を入力する必要があります。この手法は、複数の Hammer コマンドを含むスクリプトなど、複数の Hammer コマンドを順次実行する場合に適して言います。このようなシナリオでは Satellite の認証情報を一度入力すると、スクリプトは想定通りに実行されます。Hammer の認証セッションを使用する場合は、スクリプト自体に認証情報を保存せず、~/.hammer/cli.modules.d/foreman.yml
の hammer 設定ファイルに保存します。
セッションの使用方法は以下のようになります。
セッションを有効にするには、
:use_sessions: true
を~/.hammer/cli.modules.d/foreman.yml
ファイルに追加します。:foreman: :use_sessions: true
セッションを有効にすると、設定ファイルに保存している認証情報は無視されます。
セッションを開始するには、以下のコマンドを入力します。
# hammer auth login
Satellite 認証情報が求められ、ログインします。その認証情報は、セッションの有効期限が切れるまで持続するため、再要求はされません。
セッションのデフォルトの長さは 60 分ですが、自由に変更できます。ニーズに合わせて時間を変更できます。たとえば、これを 30 分に変更するには、以下のコマンドを入力します。
# hammer settings set --name idle_timeout --value 30 Setting [idle_timeout] updated to [30]
セッションの現在のステータスを表示するには、以下のコマンドを実行します。
# hammer auth status
セッションを終了するには、以下のコマンドを入力します。
# hammer auth logout
1.2.2. Hammer 設定ファイル
--foreman-initial-admin-username
および --foreman-initial-admin-password
オプションを使用して Satellite のインストールを実行すると、入力した認証情報が ~/.hammer/cli.modules.d/foreman.yml
に保存され、hammer により認証情報の入力が求められます。
認証情報は、手動で ~/.hammer/cli.modules.d/foreman.yml
設定ファイルに追加することもできます。
:foreman: :username: 'username' :password: 'password'
hammer 設定ファイルのインデントには、スペースのみを使用するようにしてください。タブは使用しないでください。
1.2.3. コマンドライン
Satellite 認証情報を ~/.hammer/cli.modules.d/foreman.yml
設定ファイルに保存しないと、コマンドを入力するたびに hammer によって認証情報が求められます。以下のように、コマンドの実行時に認証情報を指定できます。
$ hammer -u username -p password subcommands
本ガイドの例は、設定ファイルの認証情報が保存されているか、hammer 認証セッションを使用していることを前提としています。
1.3. スタンドアロンの Hammer の使用
Satellite Server がインストールされていないホストに、hammer
をインストールして、リモートの Satellite への接続に使用できます。
前提条件
- Satellite Server または Capsule Server にホストを登録しておく。詳細は、プロビジョニングガイド の ホストの登録 を参照してください。
Satellite Server または Capsule Server で以下のリポジトリーを同期しておく。詳細は、コンテンツ管理ガイド の Red Hat リポジトリーの同期 を参照してください。
- rhel-7-server-rpms
- rhel-server-rhscl-7-rpms
- rhel-7-server-satellite-tools-6.10-rpms
手順
ホストで、以下の手順を実行して hammer
をインストールします。
Red Hat Enterprise Linux、Red Hat Software Collections および Red Hat Satellite Tools 6.10 リポジトリーを有効にします。
# subscription-manager repos --enable=rhel-7-server-rpms \ --enable=rhel-server-rhscl-7-rpms \ --enable=rhel-7-server-satellite-tools-6.10-rpms
hammer
をインストールします。# yum install tfm-rubygem-hammer_cli_katello
Satellite の IP アドレスまたは FQDN を含めるように、
/etc/hammer/cli.modules.d/foreman.yml
ファイルの:host:
エントリーを編集します。:host: 'https://satellite.example.com'
1.4. デフォルトの組織およびロケーションの設定
hammer
コマンドの多くは、組織固有のものです。--organization
および --location
オプションで毎回指定する必要がないように、hammer
コマンドにデフォルトの組織とロケーションを設定できます。
組織 を 1 つ管理することが多い場合には、入力するコマンドが短くなるので、デフォルトの組織を指定すると便利です。ただし、別の組織に切り替える場合には、hammer
コマンドを使用して、--organization
オプションで切り替える組織を指定します。
手順
デフォルトの組織と場所を設定するには、次の手順を実行します。
デフォルトの組織を設定するには、以下のコマンドを入力します。
# hammer defaults add --param-name organization \ --param-value "Your_Organization"
hammer organization list
コマンドを使用して、組織の名前を検索します。オプション: デフォルトのロケーションを設定するには、以下のコマンドを入力します。
# hammer defaults add --param-name location \ --param-value "Your_Location"
hammer location list
コマンドを使用して、ロケーションの名前を検索します。現在指定しているデフォルトの設定を確認するには、以下のコマンドを実行します。
# hammer defaults list
1.5. Hammer の設定
デフォルトでは、グローバルの hammer
設定は以下の場所に配置されています。
-
一般的な
hammer
の設定: /etc/hammer/cli_config.yml - CLI モジュールの設定ファイル: /etc/hammer/cli.modules.d/
hammer
(~/.hammer/cli_config.yml) または CLI モジュール (~/.hammer/cli.modules.d/ の適切な .yml ファイル) にユーザー固有のディレクティブを設定できます。
設定ファイルの読み込み順と、読み込んだモジュールのバージョンを表示するには、以下を実行します。
$ hammer -d --version
多くの CLI モジュールの設定を読み込むと、hammer
コマンドの実行の速度が遅くなる可能性があります。このような場合に、あまり使用しない CLI モジュールを無効化することを検討してください。
「認証」に記載されているような認証情報を保存する以外に、~/.hammer/ 設定ディレクトリーに他の複数のオプションを設定できます。たとえば、~/.hammer/cli_config.yml でデフォルトのログレベルを変更して、以下のディレクティブを使用してログのローテーションを設定することができます。これらのディレクティブは、現在のユーザーにのみ影響を及ぼし、グローバルには適用されません。
:log_level: 'warning' :log_size: 5 #in MB
同様に、ユーザーインターフェイスの設定を行います。たとえば、Hammer 出力で、要求ごとに表示するエントリー数を設定するには、以下の行を変更します。
:per_page: 30
この設定は、--per-page
Hammer オプションと同等です。
1.6. Hammer ロギングの設定
hammer
を設定して、さまざまな Satellite コンポーネントのデバッグ情報をロギングすることができます。
全 Satellite コンポーネントに対してデバッグまたは通常の設定オプションを設定できます。
hammer のロギング動作を変更したら、Satellite サービスを再起動する必要があります。
# satellite-maintain service restart
全コンポーネントのデバッグレベルを設定するには、以下のコマンドを使用します。
# hammer admin logging --all --level-debug # satellite-maintain service restart
実稼動レベルのロギングを設定するには、以下のコマンドを使用します。
# hammer admin logging --all --level-production # satellite-maintain service restart
ロギングが設定可能なコンポーネントで現在認識されているものを表示するには、以下のコマンドを使用します。
# hammer admin logging --list
利用可能なロギングオプションを一覧表示するには、以下のコマンドを使用します。
# hammer admin logging --help Usage: hammer admin logging [OPTIONS]
1.7. Hammer シェルの呼び出し
対話型シェルで hammer
コマンドを発行することができます。このシェルを呼び出すには、以下のコマンドを発行します。
$ hammer shell
このシェルでは、hammer と入力せずに直接サブコマンドを入力できるので、スクリプトで使用する前にコマンドをテストする際に便利です。このシェルを終了するには、exit
と入力するか、Ctrl + D を押してください。
1.8. フォーマット済みの出力の生成
hammer
コマンドのデフォルトの出力形式を変更して、他のコマンドラインツールやアプリケーションでこの出力結果を処理しやすくすることができます。たとえば、CSV 形式で、カスタムの区切り文字を利用して (ここではセミコロンを使用) 組織を表示するには、以下のコマンドを実行します。
$ hammer --csv --csv-separator ";" organization list
CSV 形式の出力は、ID を解析して for ループで使用する必要がある場合などに便利です。
--output
オプションには、他に複数のフォーマットオプションがあります。
$ hammer --output output_format organization list
output_format を、以下のいずれかに置き換えます。
-
table
: 人間が判読できる表形式 (デフォルト) で出力を生成します。 -
base
: キーと値のペアの形式で出力を生成します。 -
yaml
: YAML 形式で出力を生成します。 -
csv
: コンマ区切りの値形式で出力を生成します。カスタムの区切り文字を定義するには、代わりに--csv
および--csv-separator
オプションを使用してください。 -
json
: JavaScript Object Notation (JSON) 形式の出力を生成します。 -
silent
: 出力を表示しません。
1.9. Hammer コマンドのヘッダー出力の非表示
hammer コマンドの使用時には、出力からヘッダーを隠すオプションがあります。カスタムスクリプトでパイプを使用するまたは出力を使用する場合は、出力の非表示が便利です。
-
ヘッダー出力を隠すには、
--no-headers
オプションを hammer コマンドに追加します。
1.10. 複雑なパラメーターへの JSON の使用
JSON は、複雑なパラメーターを記述するのに推奨される方法です。
JSON 形式のコンテンツの例を以下に示します。
# hammer compute-profile values create --compute-profile-id 22 --compute-resource-id 1 --compute-attributes= '{ "cpus": 2, "corespersocket": 2, "memory_mb": 4096, "firmware": "efi", "resource_pool": "Resources", "cluster": "Example_Cluster", "guest_id": "rhel8", "path": "/Datacenters/EXAMPLE/vm/", "hardware_version": "Default", "memoryHotAddEnabled": 0, "cpuHotAddEnabled": 0, "add_cdrom": 0, "boot_order": [ “disk", "network" ], "scsi_controllers":[ { "type": "ParaVirtualSCSIController", "key":1000 }, { "type": "ParaVirtualSCSIController", "key":1001 }it ] }'
1.11. Hammer でのトラブルシューティング
hammer ping
コマンドを使用して、コアの Satellite サービスのステータスを確認できます。satellite-maintain service status
コマンドと併用すると、Satellite の問題の診断、トラブルシューティングに役立ちます。すべてのサービスが想定どおりに実行されている場合は、出力は以下のようになります。
$ hammer ping candlepin: Status: ok Server Response: Duration: 22ms candlepin_auth: Status: ok Server Response: Duration: 17ms pulp: Status: ok Server Response: Duration: 41ms pulp_auth: Status: ok Server Response: Duration: 23ms foreman_tasks: Status: ok Server Response: Duration: 33ms
第2章 参照資料
本章では、Hammer の使用方法の説明を一覧で紹介します。以下の使用方法は、Hammer の複数バージョンおよび、Satellite 6.10 向けにリリースされた Hammer のコンポーネントに対して最新の説明です。
2.1. Hammer
Usage: hammer [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: activation-key Manipulate activation keys admin Administrative server-side tasks ansible Manage foreman ansible architecture Manipulate architectures arf-report Manipulate compliance reports audit Search audit trails. auth Foreman connection login/logout auth-source Manipulate auth sources bookmark Manage bookmarks bootdisk Download boot disks capsule Manipulate capsule compute-profile Manipulate compute profiles compute-resource Manipulate compute resources config-group Manipulate config groups config-report Browse and read reports content-credentials Manipulate content credentials on the server content-export Prepare content for export to a disconnected Katello content-import Import content from an upstream archive. content-view Manipulate content views deb-package Manipulate deb packages defaults Defaults management discovery Manipulate discovered hosts. discovery-rule Manipulate discovered rules. docker Manipulate docker content domain Manipulate domains environment Manipulate environments erratum Manipulate errata export-templates Export templates to a git repo or a directory on the server fact Search facts file Manipulate files filter Manage permission filters foreign-input-set Manage foreign input sets full-help Print help for all hammer commands global-parameter Manipulate global parameters host Manipulate hosts host-collection Manipulate host collections host-registration Host Registration hostgroup Manipulate hostgroups http-proxy Manipulate http proxies import-templates Import templates from a git repo or a directory on the server job-invocation Manage job invocations job-template Manage job templates lifecycle-environment Manipulate lifecycle_environments on the server location Manipulate locations mail-notification Manage mail notifications medium Manipulate installation media model Manipulate hardware models module-stream View Module Streams organization Manipulate organizations os Manipulate operating system ostree-branch Manipulate ostree branches package Manipulate packages package-group Manipulate package groups partition-table Manipulate partition tables ping Get the status of the server and/or it's subcomponents policy Manipulate policies prebuild-bash-completion Prepare map of options and subcommands for Bash completion product Manipulate products proxy Manipulate smart proxies puppet-class Search puppet modules puppet-environment Manipulate Puppet environments realm Manipulate realms recurring-logic Recurring logic related actions remote-execution-feature Manage remote execution features report Browse and read reports report-template Manipulate report templates repository Manipulate repositories repository-set Manipulate repository sets on the server role Manage user roles sc-param Manipulate smart class parameters scap-content Manipulate SCAP contents scap-content-profile Manipulate Scap Content Profiles settings Change server settings shell Interactive shell simple-content-access Simple content access commands srpm Manipulate source RPMs status Get the complete status of the server and/or it's subcomponents subnet Manipulate subnets subscription Manipulate subscriptions sync-plan Manipulate sync plans tailoring-file Manipulate Tailoring files task Tasks related actions. template Manipulate provisioning templates template-input Manage template inputs user Manipulate users user-group Manage user groups virt-who-config Manage Virt Who configurations webhook Manage webhooks webhook-template Manipulate webhook templates Options: --[no-]use-defaults Enable/disable stored defaults. Enabled by default --autocomplete LINE Get list of possible endings --csv Output as CSV (same as --output=csv) --csv-separator SEPARATOR Character to separate the values --fetch-ca-cert SERVER Fetch CA certificate from server and exit --interactive INTERACTIVE Explicitly turn interactive mode on/off One of true/false, yes/no, 1/0. --no-headers Hide headers from output --output ADAPTER Set output format Possible value(s): 'base', 'table', 'silent', 'csv', 'yaml', 'json' --output-file OUTPUT_FILE Path to custom output file --show-ids Show ids of associated resources --ssl-ca-file CA_FILE Configure the file containing the CA certificates --ssl-ca-path CA_PATH Configure the directory containing the CA certificates --ssl-client-cert CERT_FILE Configure the client's public certificate --ssl-client-key KEY_FILE Configure the client's private key --ssl-with-basic-auth Use standard authentication in addition to client certificate authentication --verify-ssl VERIFY_SSL Configure SSL verification of remote system One of true/false, yes/no, 1/0. --version Show version -c, --config CFG_FILE Path to custom config file -d, --debug Show debugging output -h, --help Print help -p, --password PASSWORD Password to access the remote system -q, --quiet Completely silent -r, --reload-cache Force reload of Apipie cache -s, --server SERVER Remote system address -u, --username USERNAME Username to access the remote system -v, --[no-]verbose Be verbose (or not). True by default
2.2. hammer activation-key
アクティベーションキーを操作します
Usage: hammer activation-key [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-host-collection Associate a resource add-subscription Add subscription content-override Override product content defaults copy Copy an activation key create Create an activation key delete, destroy Destroy an activation key host-collections List associated host collections info, show Show an activation key list, index List activation keys product-content List associated products remove-host-collection Disassociate a resource remove-subscription Remove subscription subscriptions List associated subscriptions update Update an activation key Options: -h, --help Print help
2.2.1. hammer activation-key add-host-collection
リソースを関連付けます。
Usage: hammer activation-key add-host-collection [OPTIONS] Options: --host-collection HOST_COLLECTION_NAME Host collection name to search by --host-collection-id HOST_COLLECTION_ID Id of the host collection --id ID ID of the activation key --name NAME Activation key name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.2.2. hammer activation-key add-subscription
サブスクリプションを追加します。
Usage: hammer activation-key add-subscription [OPTIONS] Options: --id ID ID of the activation key --name NAME Activation key name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --quantity QUANTITY Quantity of this subscription to add --subscription SUBSCRIPTION_NAME Subscription name to search by --subscription-id SUBSCRIPTION_ID Subscription identifier --subscriptions SUBSCRIPTIONS Array of subscriptions to add Comma separated list of values defined by a schema. See Option details section below. JSON is acceptable and preferred way for complex parameters -h, --help Print help Option details: Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value): --subscriptions "id=<string>\,quantity=<numeric>, ... "
2.2.3. hammer activation-key content-override
製品コンテンツのデフォルトを上書きします。
Usage: hammer activation-key content-override [OPTIONS] Options: --content-label CONTENT_LABEL Label of the content --id ID ID of the activation key --name NAME Activation key name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --override-name OVERRIDE_NAME Override parameter key or name. To enable or disable a repo select 'enabled'. Default value: enabled Default: "enabled" --remove Remove a content override --value VALUE Override value. Note for repo enablement you can use a boolean value -h, --help Print help
2.2.4. hammer activation-key copy
アクティベーションキーをコピーします。
Usage: hammer activation-key copy [OPTIONS] Options: --id ID ID of the activation key --name NAME Activation key name to search by --new-name NEW_NAME Name of new activation key --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.2.5. hammer activation-key create
アクティベーションキーを作成します。
Usage: hammer activation-key create [OPTIONS] Options: --auto-attach AUTO_ATTACH Auto attach subscriptions upon registration One of true/false, yes/no, 1/0. --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view id --description DESCRIPTION Description --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --max-hosts MAX_HOSTS Maximum number of registered content hosts --name NAME Name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --purpose-addons PURPOSE_ADDONS Sets the system add-ons Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --purpose-role PURPOSE_ROLE Sets the system purpose usage --purpose-usage PURPOSE_USAGE Sets the system purpose usage --release-version RELEASE_VERSION Content release version --service-level SERVICE_LEVEL Service level --unlimited-hosts Set hosts max to unlimited -h, --help Print help
2.2.6. hammer activation-key delete
アクティベーションキーを破棄します。
Usage: hammer activation-key <delete|destroy> [OPTIONS] Options: --id ID ID of the activation key --name NAME Activation key name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.2.7. hammer activation-key host-collections
関連付けられているホストコレクションを一覧表示します。
Usage: hammer activation-key host-collections [OPTIONS] Options: --available-for AVAILABLE_FOR Interpret specified object to return only Host Collections that can be associated with specified object. The value 'host' is supported. --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --host-id HOST_ID Filter products by host id --id ID ID of activation key --name NAME Name of activation key --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --sort-by SORT_BY Field to sort the results on --sort-order SORT_ORDER How to order the sorted results (e.g. ASC for ascending) -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.2.8. hammer activation-key info
アクティベーションキーを表示します。
Usage: hammer activation-key <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID ID of the activation key --name NAME Activation key name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: ------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------------------------|-----|---------|----- Name | x | x | x Id | x | x | x Description | x | x | Host limit | x | x | Auto attach | x | x | Release version | x | x | Lifecycle environment | x | x | Content view | x | x | Host collections/id | x | x | Host collections/name | x | x | System purpose/service level | x | x | System purpose/purpose usage | x | x | System purpose/purpose role | x | x | System purpose/purpose addons | x | x | ------------------------------|-----|---------|-----
2.2.9. hammer activation-key list
アクティベーションキーを一覧表示します。
Usage: hammer activation-key <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view identifier --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name NAME Activation key name to filter by --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string -h, --help Print help Predefined field sets: ----------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------|-----|---------|----- Id | x | x | x Name | x | x | x Host limit | x | x | Lifecycle environment | x | x | Content view | x | x | ----------------------|-----|---------|----- Search / Order fields: addon string content_view string content_view_id integer description text environment string name string organization_id integer role string subscription_id string subscription_name string usage string
2.2.10. hammer activation-key product-content
関連付けられた製品を一覧表示します。
Usage: hammer activation-key product-content [OPTIONS] Options: --content-access-mode-all CONTENT_ACCESS_MODE_ALL Get all content available, not just that provided by subscriptions One of true/false, yes/no, 1/0. --content-access-mode-env CONTENT_ACCESS_MODE_ENV Limit content to just that available in the activation key's content view version One of true/false, yes/no, 1/0. --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID ID of the activation key --name NAME Activation key name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: -----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------|-----|---------|----- Id | x | x | x Name | x | x | x Type | x | x | Url | x | x | Gpg key | x | x | Label | x | x | Default enabled? | x | x | Override | x | x | -----------------|-----|---------|-----
2.2.11. hammer activation-key remove-host-collection
リソースの関連付けを解除します。
Usage: hammer activation-key remove-host-collection [OPTIONS] Options: --host-collection HOST_COLLECTION_NAME Host collection name to search by --host-collection-id HOST_COLLECTION_ID Id of the host collection --id ID ID of the activation key --name NAME Activation key name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.2.12. hammer activation-key remove-subscription
サブスクリプションを削除します。
Usage: hammer activation-key remove-subscription [OPTIONS] Options: --id ID ID of the activation key --name NAME Activation key name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --subscription-id SUBSCRIPTION_ID ID of subscription -h, --help Print help
2.2.13. hammer activation-key subscriptions
関連付けられたサブスクリプションを一覧表示します。
Usage: hammer activation-key subscriptions [OPTIONS] Options: --activation-key ACTIVATION_KEY_NAME Activation key name to search by --activation-key-id ACTIVATION_KEY_ID Activation key ID --available-for AVAILABLE_FOR Object to show subscriptions available for, either 'host' or 'activation_key' --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID Id of a host --id ACTIVATION_KEY_ID ID of the activation key --match-host MATCH_HOST Ignore subscriptions that are unavailable to the specified host One of true/false, yes/no, 1/0. --match-installed MATCH_INSTALLED Return subscriptions that match installed products of the specified host One of true/false, yes/no, 1/0. --name ACTIVATION_KEY_NAME Activation key name to search by --no-overlap NO_OVERLAP Return subscriptions which do not overlap with a currently-attached subscription One of true/false, yes/no, 1/0. --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string -h, --help Print help Predefined field sets: -----------|-----|-------- FIELDS | ALL | DEFAULT -----------|-----|-------- Id | x | x Name | x | x Attached | x | x Quantity | x | x Start date | x | x End date | x | x Support | x | x Contract | x | x Account | x | x -----------|-----|--------
2.2.14. hammer activation-key update
アクティベーションキーを更新します。
Usage: hammer activation-key update [OPTIONS] Options: --auto-attach AUTO_ATTACH Auto attach subscriptions upon registration One of true/false, yes/no, 1/0. --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view id --description DESCRIPTION Description --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --id ID ID of the activation key --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --max-hosts MAX_HOSTS Maximum number of registered content hosts --name NAME Activation key name to search by --new-name NEW_NAME Name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --purpose-addons PURPOSE_ADDONS Sets the system add-ons Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --purpose-role PURPOSE_ROLE Sets the system purpose usage --purpose-usage PURPOSE_USAGE Sets the system purpose usage --release-version RELEASE_VERSION Content release version --service-level SERVICE_LEVEL Service level --unlimited-hosts Set hosts max to unlimited -h, --help Print help
2.3. hammer admin
サーバー側の管理タスクです。
Usage: hammer admin [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: logging Logging verbosity level setup Options: -h, --help Print help
2.3.1. hammer admin logging
ロギングの詳細レベルを設定します。
Usage: hammer admin logging [OPTIONS] Options: --no-backup Skip configuration backups creation. --prefix PATH Operate on prefixed environment (e.g. chroot). -a, --all Apply to all components. -c, --components COMPONENTS Components to apply, use --list to get them. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -d, --level-debug Increase verbosity level to debug. -h, --help Print help -l, --list List available components. -n, --dry-run Do not apply specified changes. -p, --level-production Decrease verbosity level to standard.
2.4. hammer ansible
foreman ansible を管理します。
Usage: hammer ansible [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: roles Manage ansible roles variables Manage ansible variables Options: -h, --help Print help
2.4.1. hammer ansible roles
Ansible ロールを管理します。
Usage: hammer ansible roles [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: delete, destroy Deletes Ansible role fetch Fetch Ansible roles available to be synced import DEPRECATED: Import Ansible roles info, show Show role list, index List Ansible roles obsolete DEPRECATED: Obsolete Ansible roles play-hostgroups Runs all Ansible roles on hostgroups play-hosts Runs all Ansible roles on hosts sync Sync Ansible roles Options: -h, --help Print help
2.4.1.1. hammer ansible roles delete
Ansible ロールを削除します。
Usage: hammer ansible roles <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.4.1.2. hammer ansible roles fetch
同期可能な Ansible ロールを取得します。
Usage: hammer ansible roles fetch [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --proxy-id PROXY_ID Capsule to fetch from -h, --help Print help
2.4.1.3. hammer ansible roles import
非推奨: Ansible ロールをインポートします。
Usage: hammer ansible roles import [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --proxy-id PROXY_ID Capsule to import from --role-names ROLE_NAMES Ansible role names to be imported Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.4.1.4. hammer ansible roles info
ロールを表示します。
Usage: hammer ansible roles <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Imported at | x | x | ------------|-----|---------|-----
2.4.1.5. hammer ansible roles list
Ansible ロールを一覧表示します。
Usage: hammer ansible roles <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Imported at | x | x | ------------|-----|---------|----- Search / Order fields: host string host_id integer hostgroup string hostgroup_id integer id integer name string updated_at datetime
2.4.1.6. hammer ansible roles obsolete
非推奨: Ansible ロールを使用停止します。
Usage: hammer ansible roles obsolete [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --proxy-id PROXY_ID Capsule to import from -h, --help Print help
2.4.1.7. hammer ansible roles play-hostgroups
ホストグループに対して Ansible ロールを実行します。
Usage: hammer ansible roles play-hostgroups [OPTIONS] Options: --hostgroup-ids HOSTGROUP_IDS IDs of hostgroups to play roles on Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup-titles HOSTGROUP_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroups HOSTGROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.4.1.8. hammer ansible roles play-hosts
ホストに対して Ansible ロールを実行します。
Usage: hammer ansible roles play-hosts [OPTIONS] Options: --host-ids HOST_IDS IDs of hosts to play roles on Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.4.1.9. hammer ansible roles sync
Ansible ロールの同期
Usage: hammer ansible roles sync [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --proxy-id PROXY_ID Capsule to sync from --role-names ROLE_NAMES Ansible role names to be synced Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.4.2. hammer ansible variables
Ansible 変数を管理します。
Usage: hammer ansible variables [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-matcher Create an override value for a specific ansible variable create Create Ansible variable delete, destroy Deletes Ansible variable import DEPRECATED: Import Ansible variables. This will only import variables for already existing roles, it will not import any new roles info, show Show variable list, index List Ansible variables obsolete DEPRECATED: Obsolete Ansible variables. This will only obsolete variables for already existing roles, it will not delete any old roles remove-matcher Destroy an override value update Updates Ansible variable Options: -h, --help Print help
2.4.2.1. hammer ansible variables add-matcher
特定の Ansible 変数のオーバーライド値を作成します。
Usage: hammer ansible variables add-matcher [OPTIONS] Options: --ansible-variable ANSIBLE_VARIABLE_NAME Name to search by --ansible-variable-id ANSIBLE_VARIABLE_ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --match MATCH Override match --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --value VALUE Override value, required if omit is false -h, --help Print help
2.4.2.2. hammer ansible variables create
Ansible 変数を作成します。
Usage: hammer ansible variables create [OPTIONS] Options: --ansible-role ANSIBLE_ROLE_NAME Name to search by --ansible-role-id ANSIBLE_ROLE_ID Role ID --avoid-duplicates AVOID_DUPLICATES Remove duplicate values (only array type) One of true/false, yes/no, 1/0. --default-value DEFAULT_VALUE Default value of variable --description DESCRIPTION Description of variable --hidden-value HIDDEN_VALUE When enabled the parameter is hidden in the UI One of true/false, yes/no, 1/0. --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --merge-default MERGE_DEFAULT Include default value when merging all matching values One of true/false, yes/no, 1/0. --merge-overrides MERGE_OVERRIDES Merge all matching values (only array/hash type) One of true/false, yes/no, 1/0. --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --override OVERRIDE Whether to override variable or not One of true/false, yes/no, 1/0. --override-value-order OVERRIDE_VALUE_ORDER The order in which values are resolved --validator-rule VALIDATOR_RULE Used to enforce certain values for the parameter values --validator-type VALIDATOR_TYPE Types of validation values Possible value(s): 'regexp', 'list' --variable VARIABLE Name of variable --variable-type VARIABLE_TYPE Types of variable values Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json' -h, --help Print help
2.4.2.3. hammer ansible variables delete
Ansible 変数を削除します。
Usage: hammer ansible variables <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.4.2.4. hammer ansible variables import
非推奨: Ansible 変数をインポートします。既存のロールの変数のみをインポートし、新規ロールはインポートしません。
Usage: hammer ansible variables import [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --proxy-id PROXY_ID Capsule to import from -h, --help Print help
2.4.2.5. hammer ansible variables info
変数を表示します。
Usage: hammer ansible variables <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------------------------------------|-----|-------- FIELDS | ALL | DEFAULT ------------------------------------|-----|-------- Id | x | x Variable | x | x Default value | x | x Type | x | x Role | x | x Role id | x | x Description | x | x Hidden value? | x | x Validator/type | x | x Validator/rule | x | x Override values/override | x | x Override values/merge overrides | x | x Override values/merge default value | x | x Override values/avoid duplicates | x | x Override values/order | x | x Override values/values/id | x | x Override values/values/match | x | x Override values/values/value | x | x Created at | x | x Updated at | x | x ------------------------------------|-----|--------
2.4.2.6. hammer ansible variables list
Ansible 変数を一覧表示します。
Usage: hammer ansible variables <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: --------------|-----|-------- FIELDS | ALL | DEFAULT --------------|-----|-------- Id | x | x Variable | x | x Default value | x | x Type | x | x Role | x | x Role id | x | x --------------|-----|-------- Search / Order fields: ansible_role string avoid_duplicates Values: true, false imported Values: true, false key string merge_default Values: true, false merge_overrides Values: true, false name string override Values: true, false parameter string
2.4.2.7. hammer ansible variables obsolete
非推奨: 廃止された Ansible 変数です。既存のロールの変数のみを使用されないようにするだけで、古くなったロールを削除するわけではありません。
Usage: hammer ansible variables obsolete [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --proxy-id PROXY_ID Capsule to import from -h, --help Print help
2.4.2.8. hammer ansible variables remove-matcher
オーバーライド値を破棄します。
Usage: hammer ansible variables remove-matcher [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.4.2.9. hammer ansible variables update
Ansible 変数を更新します。
Usage: hammer ansible variables update [OPTIONS] Options: --ansible-role ANSIBLE_ROLE_NAME Name to search by --ansible-role-id ANSIBLE_ROLE_ID Role ID --avoid-duplicates AVOID_DUPLICATES Remove duplicate values (only array type) One of true/false, yes/no, 1/0. --default-value DEFAULT_VALUE Default value of variable --description DESCRIPTION Description of variable --hidden-value HIDDEN_VALUE When enabled the parameter is hidden in the UI One of true/false, yes/no, 1/0. --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --merge-default MERGE_DEFAULT Include default value when merging all matching values One of true/false, yes/no, 1/0. --merge-overrides MERGE_OVERRIDES Merge all matching values (only array/hash type) One of true/false, yes/no, 1/0. --name NAME Name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --override OVERRIDE Whether to override variable or not One of true/false, yes/no, 1/0. --override-value-order OVERRIDE_VALUE_ORDER The order in which values are resolved Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --validator-rule VALIDATOR_RULE Used to enforce certain values for the parameter values --validator-type VALIDATOR_TYPE Types of validation values Possible value(s): 'regexp', 'list' --variable VARIABLE Name of variable --variable-type VARIABLE_TYPE Types of variable values Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json' -h, --help Print help
2.5. hammer architecture
アーキテクチャーを操作します。
Usage: hammer architecture [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-operatingsystem Associate an operating system create Create an architecture delete, destroy Delete an architecture info, show Show an architecture list, index List all architectures remove-operatingsystem Disassociate an operating system update Update an architecture Options: -h, --help Print help
2.5.1. hammer architecture add-operatingsystem
オペレーティングシステムを関連付けます。
Usage: hammer architecture add-operatingsystem [OPTIONS] Options: --id ID --name NAME Architecture name --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID -h, --help Print help
2.5.2. hammer architecture create
アーキテクチャーを作成します。
Usage: hammer architecture create [OPTIONS] Options: --name NAME --operatingsystem-ids OPERATINGSYSTEM_IDS Operating system IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.5.3. hammer architecture delete
アーキテクチャーを削除します。
Usage: hammer architecture <delete|destroy> [OPTIONS] Options: --id ID --name NAME Architecture name -h, --help Print help
2.5.4. hammer architecture info
アーキテクチャーを表示します。
Usage: hammer architecture <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --name NAME Architecture name -h, --help Print help Predefined field sets: -------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------------|-----|---------|----- Id | x | x | x Name | x | x | x Operating systems/ | x | x | Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | -------------------|-----|---------|-----
2.5.5. hammer architecture list
アーキテクチャーの一覧を表示します。
Usage: hammer architecture <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID ID of operating system --order ORDER Sort field and order, eg. ‘id DESC’ --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: name string
2.5.6. hammer architecture remove-operatingsystem
オペレーティングシステムの関連付けを解除します。
Usage: hammer architecture remove-operatingsystem [OPTIONS] Options: --id ID --name NAME Architecture name --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID -h, --help Print help
2.5.7. hammer architecture update
アーキテクチャーを更新します。
Usage: hammer architecture update [OPTIONS] Options: --id ID --name NAME Architecture name --new-name NEW_NAME --operatingsystem-ids OPERATINGSYSTEM_IDS Operating system IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.6. hammer arf-report
コンプライアンスレポートを操作します。
Usage: hammer arf-report [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: delete, destroy Delete an ARF Report download Download bzipped ARF report download-html Download ARF report in HTML info, show Show an ARF report list, index List ARF reports Options: -h, --help Print help
2.6.1. hammer arf-report delete
ARF レポートを削除します。
Usage: hammer arf-report <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request -h, --help Print help
2.6.2. hammer arf-report download
bzip された ARF レポートをダウンロードします。
Usage: hammer arf-report download [OPTIONS] Options: --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --path PATH Path to directory where downloaded file will be saved -h, --help Print help
2.6.3. hammer arf-report download-html
HTML 形式で ARF レポートをダウンロードします。
Usage: hammer arf-report download-html [OPTIONS] Options: --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --path PATH Path to directory where downloaded file will be saved -h, --help Print help
2.6.4. hammer arf-report info
ARF レポートを表示します。
Usage: hammer arf-report <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request -h, --help Print help Predefined field sets: --------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------|-----|---------|----- Id | x | x | x Reported at | x | x | Host name | x | x | x Openscap proxy name | x | x | Policy name | x | x | Passed | x | x | Failed | x | x | Othered | x | x | Host id | x | x | Openscap proxy id | x | x | Policy id | x | x | Locations/ | x | x | Organizations/ | x | x | --------------------|-----|---------|-----
2.6.5. hammer arf-report list
ARF レポートを一覧表示します。
Usage: hammer arf-report <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: --------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------|-----|---------|----- Id | x | x | x Reported at | x | x | Host name | x | x | x Openscap proxy name | x | x | Policy name | x | x | Passed | x | x | Failed | x | x | Othered | x | x | --------------------|-----|---------|----- Search / Order fields: compliance_policy string compliance_status Values: compliant, incompliant, inconclusive comply_with string environment string eventful Values: true, false host string host_collection string host_id integer hostgroup string hostgroup_fullname string hostgroup_title string inconclusive_with string last_for Values: host, policy last_report datetime lifecycle_environment string location string location_id integer log text not_comply_with string openscap_proxy string organization string organization_id integer origin string policy string reported datetime resource text xccdf_rule_failed string xccdf_rule_name text xccdf_rule_othered string xccdf_rule_passed string
2.7. hammer audit
監査証跡を検索します。
Usage: hammer audit [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show an audit list, index List all audits Options: -h, --help Print help
2.7.1. hammer audit info
監査を表示します。
Usage: hammer audit <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: --------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------------|-----|---------|----- Id | x | x | x At | x | x | Ip | x | x | User | x | x | Action | x | x | Audit type | x | x | Audit record | x | x | Request uuid | x | x | Audited changes/attribute | x | x | Audited changes/value | x | x | Audited changes/old | x | x | Audited changes/new | x | x | --------------------------|-----|---------|-----
2.7.2. hammer audit list
すべての監査を一覧表示します。
Usage: hammer audit <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x At | x | x | Ip | x | x | User | x | x | Action | x | x | Audit type | x | x | Audit record | x | x | Request uuid | x | | -------------|-----|---------|----- Search / Order fields: action string auditable_id integer changes text comment string host string hostgroup string hostgroup_title string id integer interface_fqdn string interface_ip string interface_mac string location string location_id integer organization string organization_id integer os string os_title string parameter string partition_table string provisioning_template string puppetclass string remote_address string request_uuid string setting string time datetime type Values: role, ptable, provisioning_template, user, filter, subnet, remote_execution_feature, hostgroup, http_proxy, katello/repository, smart_proxy, katello/host/content_facet, katello/hostgroup/content_facet, katello/host/subscription_facet, usergroup, katello/content_view, katello/kt_environment, architecture, compute_attribute, domain, medium, environment, puppetclass, model, personal_access_token, ssh_key, compute_profile, bookmark, config_group, host_class, image, key_pair, report_template, realm, job_template, job_invocation, ansible_role, discovery_rule, katello/activation_key, katello/gpg_key, katello/host_collection, katello/product, katello/sync_plan, foreman_virt_who_configure/config, foreman_openscap/policy, foreman_openscap/scap_content, foreman_openscap/tailoring_file, foreman_openscap/oval_content, foreman_openscap/oval_policy, lookup_value, hostgroup_class, katello/root_repository, auth_source, compute_resource, host, interface, location, organization, os, override_value, parameter, partition_table, setting, smart_class_parameter user string username string
2.8. hammer auth
Foreman 接続をログイン/ログアウトします。
Usage: hammer auth [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: login Set credentials logout Wipe your credentials status Information about current connections Options: -h, --help Print help
2.8.1. hammer auth login
資格情報を設定します。
Usage: hammer auth login [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: basic Provide username and password oauth Supports for both with/without 2fa Options: -h, --help Print help
2.8.1.1. hammer auth login basic
ユーザー名とパスワードを指定します。
Usage: hammer auth login basic [OPTIONS] Options: -h, --help Print help -p, --password PASSWORD Password to access the remote system -u, --username USERNAME Username to access the remote system
2.8.1.2. hammer auth login oauth
2fa ある場合、ない場合の両方をサポートします。
Usage: hammer auth login oauth [OPTIONS] Options: -a, --oidc-authorization-endpoint OPENIDC_AUTHORIZATION_ENDPOINT Openidc provider URL which issues authentication code (two factor only) -c, --oidc-client-id OPENIDC_CLIENT_ID Client id used in the Openidc provider -f, --two-factor Authenticate with two factor -h, --help Print help -p, --password PASSWORD Password to access the remote system -r, --oidc-redirect-uri OPENIDC_REDIRECT_URI Redirect URI for the authentication code grant flow -t, --oidc-token-endpoint OPENIDC_TOKEN_ENDPOINT Openidc provider URL which issues access token -u, --username USERNAME Username to access the remote system
2.8.2. hammer auth logout
資格情報を消去します。
Usage: hammer auth logout [OPTIONS] Options: -h, --help Print help
2.8.3. hammer auth status
現在の接続に関する情報
Usage: hammer auth status [OPTIONS] Options: -h, --help Print help
2.9. hammer auth-source
認証ソースを操作します。
Usage: hammer auth-source [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: external Manage external auth sources ldap Manage LDAP auth sources list, index List all auth sources Options: -h, --help Print help
2.9.1. hammer auth-source external
外部認証ソースを管理します。
Usage: hammer auth-source external [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show an external authentication source list, index List external authentication sources update Update organization and location for Auth Source Options: -h, --help Print help
2.9.1.1. hammer auth-source external info
外部認証ソースを表示します。
Usage: hammer auth-source external <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Locations/ | x | x | Organizations/ | x | x | ---------------|-----|---------|-----
2.9.1.2. hammer auth-source external list
外部認証ソースを一覧表示します。
Usage: hammer auth-source external <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: location string location_id integer name string organization string organization_id integer
2.9.1.3. hammer auth-source external update
認証ソースの組織と場所を更新します。
Usage: hammer auth-source external update [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.9.2. hammer auth-source ldap
LDAP 認証ソースを管理します。
Usage: hammer auth-source ldap [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create an LDAP authentication source delete, destroy Delete an LDAP authentication source info, show Show an LDAP authentication source list, index List all LDAP authentication sources update Update an LDAP authentication source Options: -h, --help Print help
2.9.2.1. hammer auth-source ldap create
LDAP 認証ソースを作成します。
Usage: hammer auth-source ldap create [OPTIONS] Options: --account ACCOUNT --account-password ACCOUNT_PASSWORD Required if onthefly_register is true --attr-firstname ATTR_FIRSTNAME Required if onthefly_register is true --attr-lastname ATTR_LASTNAME Required if onthefly_register is true --attr-login ATTR_LOGIN Required if onthefly_register is true --attr-mail ATTR_MAIL Required if onthefly_register is true --attr-photo ATTR_PHOTO --base-dn BASE_DN --groups-base GROUPS_BASE Groups base DN --host HOST The hostname of the LDAP server --ldap-filter LDAP_FILTER LDAP filter --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME --onthefly-register ONTHEFLY_REGISTER One of true/false, yes/no, 1/0. --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --port PORT Defaults to 389 --server-type SERVER_TYPE Type of the LDAP server Possible value(s): 'free_ipa', 'active_directory', 'posix' --tls TLS One of true/false, yes/no, 1/0. --use-netgroups USE_NETGROUPS Use NIS netgroups instead of posix groups, applicable only when server_type is posix or free_ipa One of true/false, yes/no, 1/0. --usergroup-sync USERGROUP_SYNC Sync external user groups on login One of true/false, yes/no, 1/0. -h, --help Print help
2.9.2.2. hammer auth-source ldap delete
LDAP 認証ソースを削除します。
Usage: hammer auth-source ldap <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.9.2.3. hammer auth-source ldap info
LDAP 認証ソースを表示します。
Usage: hammer auth-source ldap <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------------------------------------------|-----|-------- FIELDS | ALL | DEFAULT -------------------------------------------|-----|-------- Server/id | x | x Server/name | x | x Server/server | x | x Server/ldaps | x | x Server/port | x | x Server/server type | x | x Account/account username | x | x Account/base dn | x | x Account/groups base dn | x | x Account/use netgroups | x | x Account/ldap filter | x | x Account/automatically create accounts? | x | x Account/usergroup sync | x | x Attribute mappings/login name attribute | x | x Attribute mappings/first name attribute | x | x Attribute mappings/last name attribute | x | x Attribute mappings/email address attribute | x | x Attribute mappings/photo attribute | x | x Locations/ | x | x Organizations/ | x | x -------------------------------------------|-----|--------
2.9.2.4. hammer auth-source ldap list
LDAP 認証ソースの一覧を表示します。
Usage: hammer auth-source ldap <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x Server | x | x | Port | x | x | Ldaps? | x | x | -------|-----|---------|----- Search / Order fields: location string location_id integer name string organization string organization_id integer
2.9.2.5. hammer auth-source ldap update
LDAP 認証ソースを更新します。
Usage: hammer auth-source ldap update [OPTIONS] Options: --account ACCOUNT --account-password ACCOUNT_PASSWORD Required if onthefly_register is true --attr-firstname ATTR_FIRSTNAME Required if onthefly_register is true --attr-lastname ATTR_LASTNAME Required if onthefly_register is true --attr-login ATTR_LOGIN Required if onthefly_register is true --attr-mail ATTR_MAIL Required if onthefly_register is true --attr-photo ATTR_PHOTO --base-dn BASE_DN --groups-base GROUPS_BASE Groups base DN --host HOST The hostname of the LDAP server --id ID --ldap-filter LDAP_FILTER LDAP filter --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Name to search by --new-name NEW_NAME --onthefly-register ONTHEFLY_REGISTER One of true/false, yes/no, 1/0. --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --port PORT Defaults to 389 --server-type SERVER_TYPE Type of the LDAP server Possible value(s): 'free_ipa', 'active_directory', 'posix' --tls TLS One of true/false, yes/no, 1/0. --use-netgroups USE_NETGROUPS Use NIS netgroups instead of posix groups, applicable only when server_type is posix or free_ipa One of true/false, yes/no, 1/0. --usergroup-sync USERGROUP_SYNC Sync external user groups on login One of true/false, yes/no, 1/0. -h, --help Print help
2.9.3. hammer auth-source list
すべての認証ソースを一覧表示します。
Usage: hammer auth-source <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: --------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------|-----|---------|----- Id | x | x | x Name | x | x | x Type of auth source | x | x | --------------------|-----|---------|----- Search / Order fields: location string location_id integer name string organization string organization_id integer
2.10. hammer bookmark
ブックマークを管理します。
Usage: hammer bookmark [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a bookmark delete, destroy Delete a bookmark info, show Show a bookmark list, index List all bookmarks update Update a bookmark Options: -h, --help Print help
2.10.1. hammer bookmark create
ブックマークを作成します。
Usage: hammer bookmark create [OPTIONS] Options: --controller CONTROLLER --name NAME --public PUBLIC One of true/false, yes/no, 1/0. --query QUERY -h, --help Print help
2.10.2. hammer bookmark delete
ブックマークを削除します。
Usage: hammer bookmark <delete|destroy> [OPTIONS] Options: --id ID --name NAME Name to search by -h, --help Print help
2.10.3. hammer bookmark info
ブックマークを表示します。
Usage: hammer bookmark <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --name NAME Name to search by -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Controller | x | x | Search query | x | x | Public | x | x | Owner id | x | x | Owner type | x | x | -------------|-----|---------|-----
2.10.4. hammer bookmark list
すべてのブックマークを一覧表示します。
Usage: hammer bookmark <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --order ORDER Sort field and order, eg. ‘id DESC’ --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Controller | x | x | Search query | x | x | Public | x | x | Owner id | x | x | Owner type | x | x | -------------|-----|---------|----- Search / Order fields: controller string name string
2.10.5. hammer bookmark update
ブックマークを更新します。
Usage: hammer bookmark update [OPTIONS] Options: --controller CONTROLLER --id ID --name NAME Name to search by --new-name NEW_NAME --public PUBLIC One of true/false, yes/no, 1/0. --query QUERY -h, --help Print help
2.11. hammer bootdisk
ブートディスクをダウンロードします。
Usage: hammer bootdisk [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: generic Download generic image host Download host image subnet Download subnet generic image Options: -h, --help Print help
2.11.1. hammer bootdisk generic
汎用イメージをダウンロードします。
Usage: hammer bootdisk generic [OPTIONS] Options: --file PATH File or device to write image to --force Force writing to existing destination (device etc.) --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --sudo Use sudo to write to device -h, --help Print help
2.11.2. hammer bootdisk host
ホストイメージをダウンロードします。
Usage: hammer bootdisk host [OPTIONS] Options: --file PATH File or device to write image to --force Force writing to existing destination (device etc.) --full FULL True for full, false for basic reusable image One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --sudo Use sudo to write to device -h, --help Print help
2.11.3. hammer bootdisk subnet
サブネット汎用イメージをダウンロードします。
Usage: hammer bootdisk subnet [OPTIONS] Options: --file PATH File or device to write image to --force Force writing to existing destination (device etc.) --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID --sudo Use sudo to write to device -h, --help Print help
2.12. hammer capsule
Capsule を操作します。
Usage: hammer capsule [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: content Manage the capsule content create Create a capsule delete, destroy Delete a capsule import-classes Import puppet classes from puppet Capsule info, show Show a capsule list, index List all capsules refresh-features Refresh capsule features update Update a capsule Options: -h, --help Print help
2.12.1. hammer capsule content
Capsule コンテンツを管理します。
Usage: hammer capsule content [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-lifecycle-environment Add lifecycle environments to the capsule available-lifecycle-environments List the lifecycle environments not attached to the capsule cancel-synchronization Cancel running capsule synchronization info Get current capsule synchronization status lifecycle-environments List the lifecycle environments attached to the capsule remove-lifecycle-environment Remove lifecycle environments from the capsule synchronization-status Get current capsule synchronization status synchronize Synchronize the content to the capsule Options: -h, --help Print help
2.12.1.1. hammer capsule content add-lifecycle-environment
ライフサイクル環境を Capsule に追加します。
Usage: hammer capsule content add-lifecycle-environment [OPTIONS] Options: --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --id ID Id of the capsule --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name NAME Name to search by --organization NAME Organization name --organization-id ID Organization ID -h, --help Print help
2.12.1.2. hammer capsule content available-lifecycle-environments
Capsule に割り当てられていないライフサイクル環境を一覧表示します。
Usage: hammer capsule content available-lifecycle-environments [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the capsule --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Id of the organization to limit environments on --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Organization | x | x | -------------|-----|---------|-----
2.12.1.3. hammer capsule content cancel-synchronization
実行中の Capsule 同期をキャンセルします。
Usage: hammer capsule content cancel-synchronization [OPTIONS] Options: --id ID Id of the capsule --name NAME Name to search by -h, --help Print help
2.12.1.4. hammer capsule content info
現在の Capsule 同期ステータスを取得します。
Usage: hammer capsule content info [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the capsule --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Id of the organization to get the status for --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: -------------------------------------------------------------------|-----|-------- FIELDS | ALL | DEFAULT -------------------------------------------------------------------|-----|-------- Lifecycle environments/name | x | x Lifecycle environments/organization | x | x Lifecycle environments/content views/name | x | x Lifecycle environments/content views/composite | x | x Lifecycle environments/content views/last published | x | x Lifecycle environments/content views/content/hosts | x | x Lifecycle environments/content views/content/products | x | x Lifecycle environments/content views/content/yum repos | x | x Lifecycle environments/content views/content/container image repos | x | x Lifecycle environments/content views/content/packages | x | x Lifecycle environments/content views/content/package groups | x | x Lifecycle environments/content views/content/errata | x | x -------------------------------------------------------------------|-----|--------
2.12.1.5. hammer capsule content lifecycle-environments
Capsule に割り当てられたライフサイクル環境を一覧表示します。
Usage: hammer capsule content lifecycle-environments [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the capsule --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Id of the organization to limit environments on --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Organization | x | x | -------------|-----|---------|-----
2.12.1.6. hammer capsule content remove-lifecycle-environment
ライフサイクル環境を Capsule から削除します。
Usage: hammer capsule content remove-lifecycle-environment [OPTIONS] Options: --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --id ID Id of the capsule --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name NAME Name to search by --organization NAME Organization name --organization-id ID Organization ID -h, --help Print help
2.12.1.7. hammer capsule content synchronization-status
現在の Capsule 同期ステータスを取得します。
Usage: hammer capsule content synchronization-status [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the capsule --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Id of the organization to get the status for --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: --------------------------------------|-----|-------- FIELDS | ALL | DEFAULT --------------------------------------|-----|-------- Last sync | x | x Status | x | x Currently running sync tasks/task id | x | x Currently running sync tasks/progress | x | x Last failure/task id | x | x Last failure/messages | x | x --------------------------------------|-----|--------
2.12.1.8. hammer capsule content synchronize
コンテンツと Capsule を同期します。
Usage: hammer capsule content synchronize [OPTIONS] Options: --async Do not wait for the task --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --id ID Id of the capsule --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name NAME Name to search by --organization NAME Organization name --organization-id ID Organization ID --skip-metadata-check SKIP_METADATA_CHECK Skip metadata check on each repository on the capsule One of true/false, yes/no, 1/0. -h, --help Print help
2.12.2. hammer capsule create
Capsule を作成します。
Usage: hammer capsule create [OPTIONS] Options: --download-policy DOWNLOAD_POLICY Download Policy of the capsule, must be one of on_demand, immediate, inherit --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --url URL -h, --help Print help
2.12.3. hammer capsule delete
Capsule を削除します。
Usage: hammer capsule <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.12.4. hammer capsule import-classes
Puppet Capsule から puppet クラスをインポートします。
Usage: hammer capsule import-classes [OPTIONS] Options: --dryrun Do not run the import --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --except EXCEPT Optional comma-delimited string containing either 'new', 'updated', or 'obsolete' that is used to limit the imported Puppet classes --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID -h, --help Print help
2.12.5. hammer capsule info
Capsule を表示します。
Usage: hammer capsule <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Url | x | x | Features | x | x | Features/ | x | x | Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | ---------------|-----|---------|-----
2.12.6. hammer capsule list
Capsule を一覧表示します。
Usage: hammer capsule <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ---------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------|-----|---------|----- Id | x | x | x Name | x | x | x Url | x | x | Features | x | x | ---------|-----|---------|----- Search / Order fields: feature string location string location_id integer name string organization string organization_id integer url string
2.12.7. hammer capsule refresh-features
Capsule 機能をリフレッシュします。
Usage: hammer capsule refresh-features [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.12.8. hammer capsule update
Capsule を更新します。
Usage: hammer capsule update [OPTIONS] Options: --download-policy DOWNLOAD_POLICY Download Policy of the capsule, must be one of on_demand, immediate, inherit --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --url URL -h, --help Print help
2.13. hammer compute-profile
コンピュートプロファイルを操作します。
Usage: hammer compute-profile [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a compute profile delete, destroy Delete a compute profile info, show Show a compute profile list, index List of compute profiles update Update a compute profile values Create update and delete Compute profile values Options: -h, --help Print help
2.13.1. hammer compute-profile create
コンピュートプロファイルを作成します。
Usage: hammer compute-profile create [OPTIONS] Options: --name NAME -h, --help Print help
2.13.2. hammer compute-profile delete
コンピュートプロファイルを削除します。
Usage: hammer compute-profile <delete|destroy> [OPTIONS] Options: --id ID --name NAME Compute profile name -h, --help Print help
2.13.3. hammer compute-profile info
コンピュートプロファイルを表示します。
Usage: hammer compute-profile <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --name NAME Compute profile name -h, --help Print help Predefined field sets: ------------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | Compute attributes/id | x | x | Compute attributes/name | x | x | Compute attributes/compute resource | x | x | Compute attributes/vm attributes | x | x | ------------------------------------|-----|---------|-----
2.13.4. hammer compute-profile list
コンピュートプロファイルを一覧表示します。
Usage: hammer compute-profile <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --order ORDER Sort field and order, eg. ‘id DESC’ --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: name string
2.13.5. hammer compute-profile update
コンピュートプロファイルを更新します。
Usage: hammer compute-profile update [OPTIONS] Options: --id ID --name NAME Compute profile name --new-name NEW_NAME -h, --help Print help
2.13.6. hammer compute-profile values
コンピュートプロファイルの値を作成、更新、削除します。
Usage: hammer compute-profile values [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-interface Add interface for Compute Profile add-volume Add volume for Compute Profile create Create compute profile set of values remove-interface Remove compute profile interface remove-volume Remove compute profile volume update Update compute profile values update-interface Update compute profile interface update-volume Update compute profile volume Options: -h, --help Print help
2.13.6.1. hammer compute-profile values add-interface
コンピュートプロファイルのインターフェイスを追加します。
Usage: hammer compute-profile values add-interface [OPTIONS] Options: --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --interface SET_VALUES Interface parameters, should be comma separated list of values Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Provider specific options: NOTE: Bold attributes are required. EC2: --interface: GCE: --interface: Libvirt: --interface: compute_type Possible values: bridge, network compute_bridge Name of interface according to type compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000 compute_network Libvirt instance network, e.g. default OpenStack: --interface: oVirt: --interface: compute_name Compute name, e.g. eth0 compute_network Select one of available networks for a cluster, must be an ID or a name compute_interface Interface type compute_vnic_profile Vnic Profile Rackspace: --interface: VMware: --interface: compute_type Type of the network adapter, for example one of: VirtualVmxnet3 VirtualE1000 See documentation center for your version of vSphere to find more details about available adapter types: https://www.vmware.com/support/pubs/ compute_network Network ID or Network Name from VMware AzureRM: --interface: compute_network Select one of available Azure Subnets, must be an ID compute_public_ip Public IP (None, Static, Dynamic) compute_private_ip Static Private IP (expressed as true or false)
2.13.6.2. hammer compute-profile values add-volume
コンピュートプロファイルのボリュームを追加します。
Usage: hammer compute-profile values add-volume [OPTIONS] Options: --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --volume VOLUME Volume parameters, should be comma separated list of values Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters -h, --help Print help Provider specific options: NOTE: Bold attributes are required. EC2: --volume: GCE: --volume: size_gb Volume size in GB, integer value Libvirt: --volume: pool_name One of available storage pools capacity String value, e.g. 10G allocation Initial allocation, e.g. 0G format_type Possible values: raw, qcow2 OpenStack: --volume: oVirt: --volume: size_gb Volume size in GB, integer value storage_domain ID or name of storage domain bootable Boolean, set 1 for bootable, only one volume can be bootable preallocate Boolean, set 1 to preallocate wipe_after_delete Boolean, set 1 to wipe disk after delete interface Disk interface name, must be ide, virto or virto_scsi Rackspace: --volume: VMware: --volume: name storage_pod Storage Pod ID from VMware datastore Datastore ID from VMware mode persistent/independent_persistent/independent_nonpersistent size_gb Integer number, volume size in GB thin true/false eager_zero true/false controller_key Associated SCSI controller key AzureRM: --volume: disk_size_gb Volume Size in GB (integer value) data_disk_caching Data Disk Caching (None, ReadOnly, ReadWrite)
2.13.6.3. hammer compute-profile values create
コンピュートプロファイルの値セットを作成します。
Usage: hammer compute-profile values create [OPTIONS] Options: --compute-attributes COMPUTE_ATTRS Compute resource attributes Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --interface INTERFACE Interface parameters, should be comma separated list of values Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters Can be specified multiple times. --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --volume VOLUME Volume parameters, should be comma separated list of values Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters Can be specified multiple times. -h, --help Print help Provider specific options: NOTE: Bold attributes are required. EC2: --volume: --interface: --compute-attributes: availability_zone flavor_id groups security_group_ids managed_ip GCE: --volume: size_gb Volume size in GB, integer value --interface: --compute-attributes: machine_type network associate_external_ip Libvirt: --volume: pool_name One of available storage pools capacity String value, e.g. 10G allocation Initial allocation, e.g. 0G format_type Possible values: raw, qcow2 --interface: compute_type Possible values: bridge, network compute_bridge Name of interface according to type compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000 compute_network Libvirt instance network, e.g. default --compute-attributes: cpus Number of CPUs memory String, amount of memory, value in bytes cpu_mode Possible values: default, host-model, host-passthrough OpenStack: --volume: --interface: --compute-attributes: availability_zone boot_from_volume flavor_ref image_ref tenant_id security_groups network oVirt: --volume: size_gb Volume size in GB, integer value storage_domain ID or name of storage domain bootable Boolean, set 1 for bootable, only one volume can be bootable preallocate Boolean, set 1 to preallocate wipe_after_delete Boolean, set 1 to wipe disk after delete interface Disk interface name, must be ide, virto or virto_scsi --interface: compute_name Compute name, e.g. eth0 compute_network Select one of available networks for a cluster, must be an ID or a name compute_interface Interface type compute_vnic_profile Vnic Profile --compute-attributes: cluster ID or name of cluster to use template Hardware profile to use cores Integer value, number of cores sockets Integer value, number of sockets memory Amount of memory, integer value in bytes ha Boolean, set 1 to high availability display_type Possible values: VNC, SPICE keyboard_layout Possible values: ar, de-ch, es, fo, fr-ca, hu, ja, mk, no, pt-br, sv, da, en-gb, et, fr, fr-ch, is, lt, nl, pl, ru, th, de, en-us, fi, fr-be, hr, it, lv, nl-be, pt, sl, tr. Not usable if display type is SPICE. Rackspace: --volume: --interface: --compute-attributes: flavor_id VMware: --volume: name storage_pod Storage Pod ID from VMware datastore Datastore ID from VMware mode persistent/independent_persistent/independent_nonpersistent size_gb Integer number, volume size in GB thin true/false eager_zero true/false controller_key Associated SCSI controller key --interface: compute_type Type of the network adapter, for example one of: VirtualVmxnet3 VirtualE1000 See documentation center for your version of vSphere to find more details about available adapter types: https://www.vmware.com/support/pubs/ compute_network Network ID or Network Name from VMware --compute-attributes: cluster Cluster ID from VMware corespersocket Number of cores per socket (applicable to hardware versions < 10 only) cpus CPU count memory_mb Integer number, amount of memory in MB path Path to folder resource_pool Resource Pool ID from VMware firmware automatic/bios/efi guest_id Guest OS ID form VMware hardware_version Hardware version ID from VMware memoryHotAddEnabled Must be a 1 or 0, lets you add memory resources while the machine is on cpuHotAddEnabled Must be a 1 or 0, lets you add CPU resources while the machine is on add_cdrom Must be a 1 or 0, Add a CD-ROM drive to the virtual machine annotation Annotation Notes scsi_controllers List with SCSI controllers definitions type - ID of the controller from VMware key - Key of the controller (e.g. 1000) AzureRM: --volume: disk_size_gb Volume Size in GB (integer value) data_disk_caching Data Disk Caching (None, ReadOnly, ReadWrite) --interface: compute_network Select one of available Azure Subnets, must be an ID compute_public_ip Public IP (None, Static, Dynamic) compute_private_ip Static Private IP (expressed as true or false) --compute-attributes: resource_group Existing Azure Resource Group of user vm_size VM Size, eg. Standard_A0 etc. username The Admin username password The Admin password platform OS type eg. Linux ssh_key_data SSH key for passwordless authentication os_disk_caching OS disk caching premium_os_disk Premium OS Disk, Boolean as 0 or 1 script_command Custom Script Command script_uris Comma seperated file URIs
2.13.6.4. hammer compute-profile values remove-interface
コンピュートプロファイルのインターフェイスを削除します。
Usage: hammer compute-profile values remove-interface [OPTIONS] Options: --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --interface-id INTERFACE ID Interface id --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.13.6.5. hammer compute-profile values remove-volume
コンピュートプロファイルのボリュームを削除します。
Usage: hammer compute-profile values remove-volume [OPTIONS] Options: --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --volume-id VOLUME_ID Volume id -h, --help Print help
2.13.6.6. hammer compute-profile values update
コンピュートプロファイルの値を更新します。
Usage: hammer compute-profile values update [OPTIONS] Options: --compute-attributes COMPUTE_ATTRS Compute resource attributes, should be comma separated list of values Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --interface INTERFACE Interface parameters, should be comma separated list of values Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters Can be specified multiple times. --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --volume VOLUME Volume parameters, should be comma separated list of values Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters Can be specified multiple times. -h, --help Print help Provider specific options: NOTE: Bold attributes are required. EC2: --volume: --interface: --compute-attributes: availability_zone flavor_id groups security_group_ids managed_ip GCE: --volume: size_gb Volume size in GB, integer value --interface: --compute-attributes: machine_type network associate_external_ip Libvirt: --volume: pool_name One of available storage pools capacity String value, e.g. 10G allocation Initial allocation, e.g. 0G format_type Possible values: raw, qcow2 --interface: compute_type Possible values: bridge, network compute_bridge Name of interface according to type compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000 compute_network Libvirt instance network, e.g. default --compute-attributes: cpus Number of CPUs memory String, amount of memory, value in bytes cpu_mode Possible values: default, host-model, host-passthrough OpenStack: --volume: --interface: --compute-attributes: availability_zone boot_from_volume flavor_ref image_ref tenant_id security_groups network oVirt: --volume: size_gb Volume size in GB, integer value storage_domain ID or name of storage domain bootable Boolean, set 1 for bootable, only one volume can be bootable preallocate Boolean, set 1 to preallocate wipe_after_delete Boolean, set 1 to wipe disk after delete interface Disk interface name, must be ide, virto or virto_scsi --interface: compute_name Compute name, e.g. eth0 compute_network Select one of available networks for a cluster, must be an ID or a name compute_interface Interface type compute_vnic_profile Vnic Profile --compute-attributes: cluster ID or name of cluster to use template Hardware profile to use cores Integer value, number of cores sockets Integer value, number of sockets memory Amount of memory, integer value in bytes ha Boolean, set 1 to high availability display_type Possible values: VNC, SPICE keyboard_layout Possible values: ar, de-ch, es, fo, fr-ca, hu, ja, mk, no, pt-br, sv, da, en-gb, et, fr, fr-ch, is, lt, nl, pl, ru, th, de, en-us, fi, fr-be, hr, it, lv, nl-be, pt, sl, tr. Not usable if display type is SPICE. Rackspace: --volume: --interface: --compute-attributes: flavor_id VMware: --volume: name storage_pod Storage Pod ID from VMware datastore Datastore ID from VMware mode persistent/independent_persistent/independent_nonpersistent size_gb Integer number, volume size in GB thin true/false eager_zero true/false controller_key Associated SCSI controller key --interface: compute_type Type of the network adapter, for example one of: VirtualVmxnet3 VirtualE1000 See documentation center for your version of vSphere to find more details about available adapter types: https://www.vmware.com/support/pubs/ compute_network Network ID or Network Name from VMware --compute-attributes: cluster Cluster ID from VMware corespersocket Number of cores per socket (applicable to hardware versions < 10 only) cpus CPU count memory_mb Integer number, amount of memory in MB path Path to folder resource_pool Resource Pool ID from VMware firmware automatic/bios/efi guest_id Guest OS ID form VMware hardware_version Hardware version ID from VMware memoryHotAddEnabled Must be a 1 or 0, lets you add memory resources while the machine is on cpuHotAddEnabled Must be a 1 or 0, lets you add CPU resources while the machine is on add_cdrom Must be a 1 or 0, Add a CD-ROM drive to the virtual machine annotation Annotation Notes scsi_controllers List with SCSI controllers definitions type - ID of the controller from VMware key - Key of the controller (e.g. 1000) AzureRM: --volume: disk_size_gb Volume Size in GB (integer value) data_disk_caching Data Disk Caching (None, ReadOnly, ReadWrite) --interface: compute_network Select one of available Azure Subnets, must be an ID compute_public_ip Public IP (None, Static, Dynamic) compute_private_ip Static Private IP (expressed as true or false) --compute-attributes: resource_group Existing Azure Resource Group of user vm_size VM Size, eg. Standard_A0 etc. username The Admin username password The Admin password platform OS type eg. Linux ssh_key_data SSH key for passwordless authentication os_disk_caching OS disk caching premium_os_disk Premium OS Disk, Boolean as 0 or 1 script_command Custom Script Command script_uris Comma seperated file URIs
2.13.6.7. hammer compute-profile values update-interface
コンピュートプロファイルのインターフェイスを更新します。
Usage: hammer compute-profile values update-interface [OPTIONS] Options: --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --interface SET_VALUES Interface parameters, should be comma separated list of values Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --interface-id INTERFACE_ID Interface id --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Provider specific options: NOTE: Bold attributes are required. EC2: --interface: GCE: --interface: Libvirt: --interface: compute_type Possible values: bridge, network compute_bridge Name of interface according to type compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000 compute_network Libvirt instance network, e.g. default OpenStack: --interface: oVirt: --interface: compute_name Compute name, e.g. eth0 compute_network Select one of available networks for a cluster, must be an ID or a name compute_interface Interface type compute_vnic_profile Vnic Profile Rackspace: --interface: VMware: --interface: compute_type Type of the network adapter, for example one of: VirtualVmxnet3 VirtualE1000 See documentation center for your version of vSphere to find more details about available adapter types: https://www.vmware.com/support/pubs/ compute_network Network ID or Network Name from VMware AzureRM: --interface: compute_network Select one of available Azure Subnets, must be an ID compute_public_ip Public IP (None, Static, Dynamic) compute_private_ip Static Private IP (expressed as true or false)
2.13.6.8. hammer compute-profile values update-volume
コンピュートプロファイルのボリュームを更新します。
Usage: hammer compute-profile values update-volume [OPTIONS] Options: --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --volume VOLUME Volume parameters, should be comma separated list of values Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --volume-id VOLUME_ID Volume id -h, --help Print help Provider specific options: NOTE: Bold attributes are required. EC2: --volume: GCE: --volume: size_gb Volume size in GB, integer value Libvirt: --volume: pool_name One of available storage pools capacity String value, e.g. 10G allocation Initial allocation, e.g. 0G format_type Possible values: raw, qcow2 OpenStack: --volume: oVirt: --volume: size_gb Volume size in GB, integer value storage_domain ID or name of storage domain bootable Boolean, set 1 for bootable, only one volume can be bootable preallocate Boolean, set 1 to preallocate wipe_after_delete Boolean, set 1 to wipe disk after delete interface Disk interface name, must be ide, virto or virto_scsi Rackspace: --volume: VMware: --volume: name storage_pod Storage Pod ID from VMware datastore Datastore ID from VMware mode persistent/independent_persistent/independent_nonpersistent size_gb Integer number, volume size in GB thin true/false eager_zero true/false controller_key Associated SCSI controller key AzureRM: --volume: disk_size_gb Volume Size in GB (integer value) data_disk_caching Data Disk Caching (None, ReadOnly, ReadWrite)
2.14. hammer compute-resource
コンピュートリソースを操作します。
Usage: hammer compute-resource [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: associate-vms Associate VMs to Hosts clusters List available clusters for a compute resource create Create a compute resource delete, destroy Delete a compute resource flavors List available flavors for a compute resource folders List available folders for a compute resource image View and manage compute resource's images images List available images for a compute resource info, show Show a compute resource list, index List all compute resources networks List available networks for a compute resource resource-pools List resource pools for a compute resource cluster security-groups List available security groups for a compute resource storage-domains List storage domains for a compute resource storage-pods List storage pods for a compute resource update Update a compute resource virtual-machine View and manage compute resource's virtual machines virtual-machines List available virtual machines for a compute resource vnic-profiles List available vnic profiles for a compute resource, for RHEV only zones List available zone for a compute resource Options: -h, --help Print help
2.14.1. hammer compute-resource associate-vms
VM のホストへの関連付け
Usage: hammer compute-resource associate-vms [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.14.2. hammer compute-resource clusters
コンピューティングリソースで利用可能なクラスターを一覧表示します。
Usage: hammer compute-resource clusters [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.14.3. hammer compute-resource create
コンピュートリソースを作成します。
Usage: hammer compute-resource create [OPTIONS] Options: --app-ident APP_IDENT Client ID for AzureRm --caching-enabled CACHING_ENABLED Enable caching, for VMware only One of true/false, yes/no, 1/0. --cloud CLOUD Cloud --datacenter DATACENTER For RHEV, VMware Datacenter --description DESCRIPTION --display-type DISPLAY_TYPE For Libvirt and RHEV only Possible value(s): 'VNC', 'SPICE' --domain DOMAIN For RHEL OpenStack Platform (v3) only --email EMAIL Email for GCE only --key-path KEY_PATH Certificate path for GCE only --keyboard-layout KEYBOARD_LAYOUT For RHEV only Possible value(s): 'ar', 'de-ch', 'es', 'fo', 'fr-ca', 'hu', 'ja', 'mk', 'no', 'pt-br', 'sv', 'da', 'en-gb', 'et', 'fr', 'fr-ch', 'is', 'lt', 'nl', 'pl', 'ru', 'th', 'de', 'en-us', 'fi', 'fr-be', 'hr', 'it', 'lv', 'nl-be', 'pt', 'sl', 'tr' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ovirt-quota OVIRT_QUOTA For RHEV only, ID or Name of quota to use --password PASSWORD Password for RHEV, EC2, VMware, RHEL OpenStack Platform. Secret key for EC2 --project PROJECT Project id for GCE only --project-domain-id PROJECT_DOMAIN_ID For RHEL OpenStack Platform (v3) only --project-domain-name PROJECT_DOMAIN_NAME For RHEL OpenStack Platform (v3) only --provider PROVIDER Providers include Libvirt, Ovirt, EC2, Vmware, Openstack, GCE, AzureRm --public-key PUBLIC_KEY For RHEV only --public-key-path PUBLIC_KEY_PATH Path to a file that contains oVirt public key (For oVirt only) --region REGION For AzureRm eg. 'eastus' and for EC2 only. Use 'us-gov-west-1' for EC2 GovCloud region --secret-key SECRET_KEY Client Secret for AzureRm --server SERVER For VMware --set-console-password SET_CONSOLE_PASSWORD For Libvirt and VMware only One of true/false, yes/no, 1/0. --sub-id SUB_ID Subscription ID for AzureRm --tenant TENANT For RHEL OpenStack Platform and AzureRm only --url URL URL for Libvirt, RHEV and RHEL OpenStack Platform --user USER Username for RHEV, EC2, VMware, RHEL OpenStack Platform. Access Key for EC2. --zone ZONE For GCE only -h, --help Print help
2.14.4. hammer compute-resource delete
コンピュートリソースを削除します。
Usage: hammer compute-resource <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.14.5. hammer compute-resource flavors
コンピューティングリソースで利用可能なフレーバーを一覧表示します。
Usage: hammer compute-resource flavors [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.14.6. hammer compute-resource folders
コンピューティングリソースで利用可能なフォルダーを一覧表示します。
Usage: hammer compute-resource folders [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.14.7. hammer compute-resource image
コンピュートリソースのイメージを表示および管理します。
Usage: hammer compute-resource image [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: available Show images available for addition create Create an image delete, destroy Delete an image info, show Show an image list, index List all images for a compute resource update Update an image Options: -h, --help Print help
2.14.7.1. hammer compute-resource image available
追加できるイメージを表示します。
Usage: hammer compute-resource image available [OPTIONS] Options: --compute-resource NAME Compute resource name --compute-resource-id ID --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Name | x | x | x Uuid | x | x | -------|-----|---------|-----
2.14.7.2. hammer compute-resource image create
イメージを作成する
Usage: hammer compute-resource image create [OPTIONS] Options: --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID ID of architecture --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID ID of operating system --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --password PASSWORD --user-data USER_DATA Whether or not the image supports user data One of true/false, yes/no, 1/0. --username USERNAME --uuid UUID Template ID in the compute resource -h, --help Print help
2.14.7.3. hammer compute-resource image delete
イメージを削除します。
Usage: hammer compute-resource image <delete|destroy> [OPTIONS] Options: --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.14.7.4. hammer compute-resource image info
イメージを表示します。
Usage: hammer compute-resource image <info|show> [OPTIONS] Options: --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID ID of architecture --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID ID of compute resource --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID ID of operating system --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------|-----|---------|----- Id | x | x | x Name | x | x | x Operating system | x | x | Username | x | x | Uuid | x | x | User data | x | x | Architecture | x | x | Iam role | x | x | Created at | x | x | Updated at | x | x | -----------------|-----|---------|-----
2.14.7.5. hammer compute-resource image list
コンピュートリソースのイメージを一覧表示します。
Usage: hammer compute-resource image <list|index> [OPTIONS] Options: --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID ID of architecture --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID ID of compute resource --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID ID of operating system --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------|-----|---------|----- Id | x | x | x Name | x | x | x Operating system | x | x | Username | x | x | Uuid | x | x | User data | x | x | -----------------|-----|---------|----- Search / Order fields: architecture integer compute_resource string name string operatingsystem integer user_data Values: true, false username string
2.14.7.6. hammer compute-resource image update
イメージを更新します。
Usage: hammer compute-resource image update [OPTIONS] Options: --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID ID of architecture --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --new-name NEW_NAME --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID ID of operating system --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --password PASSWORD --user-data USER_DATA Whether or not the image supports user data One of true/false, yes/no, 1/0. --username USERNAME --uuid UUID Template ID in the compute resource -h, --help Print help
2.14.8. hammer compute-resource images
コンピューティングリソースで利用可能なイメージを表示します。
Usage: hammer compute-resource images [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Uuid | x | x | Name | x | x | x -------|-----|---------|-----
2.14.9. hammer compute-resource info
コンピュートリソースを表示します。
Usage: hammer compute-resource <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Provider | x | x | Description | x | x | User | x | x | Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | ---------------|-----|---------|-----
2.14.10. hammer compute-resource list
コンピュートリソースの一覧を表示します。
Usage: hammer compute-resource <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ---------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------|-----|---------|----- Id | x | x | x Name | x | x | x Provider | x | x | ---------|-----|---------|----- Search / Order fields: id integer location string location_id integer name string organization string organization_id integer type string
2.14.11. hammer compute-resource networks
コンピューティングリソースで利用可能なネットワークを一覧表示します。
Usage: hammer compute-resource networks [OPTIONS] Options: --cluster-id CLUSTER_ID --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.14.12. hammer compute-resource resource-pools
コンピュートリソースクラスターのリソースプールを一覧表示します。
Usage: hammer compute-resource resource-pools [OPTIONS] Options: --cluster-id CLUSTER_ID --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.14.13. hammer compute-resource security-groups
コンピューティングリソースで利用可能なセキュリティーグループを一覧表示します。
Usage: hammer compute-resource security-groups [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.14.14. hammer compute-resource storage-domains
コンピューティングリソースのストレージドメインを一覧表示します。
Usage: hammer compute-resource storage-domains [OPTIONS] Options: --cluster-id CLUSTER_ID --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --storage-domain STORAGE_DOMAIN -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.14.15. hammer compute-resource storage-pods
コンピューティングリソースのストレージ Pod を一覧表示します。
Usage: hammer compute-resource storage-pods [OPTIONS] Options: --cluster-id CLUSTER_ID --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --storage-pod STORAGE_POD -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.14.16. hammer compute-resource update
コンピュートリソースを更新します。
Usage: hammer compute-resource update [OPTIONS] Options: --app-ident APP_IDENT Client ID for AzureRm --caching-enabled CACHING_ENABLED Enable caching, for VMware only One of true/false, yes/no, 1/0. --cloud CLOUD Cloud --datacenter DATACENTER For RHEV, VMware Datacenter --description DESCRIPTION --display-type DISPLAY_TYPE For Libvirt and RHEV only Possible value(s): 'VNC', 'SPICE' --domain DOMAIN For RHEL OpenStack Platform (v3) only --email EMAIL Email for GCE only --id ID --key-path KEY_PATH Certificate path for GCE only --keyboard-layout KEYBOARD_LAYOUT For RHEV only Possible value(s): 'ar', 'de-ch', 'es', 'fo', 'fr-ca', 'hu', 'ja', 'mk', 'no', 'pt-br', 'sv', 'da', 'en-gb', 'et', 'fr', 'fr-ch', 'is', 'lt', 'nl', 'pl', 'ru', 'th', 'de', 'en-us', 'fi', 'fr-be', 'hr', 'it', 'lv', 'nl-be', 'pt', 'sl', 'tr' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Compute resource name --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ovirt-quota OVIRT_QUOTA For RHEV only, ID or Name of quota to use --password PASSWORD Password for RHEV, EC2, VMware, RHEL OpenStack Platform. Secret key for EC2 --project PROJECT Project id for GCE only --project-domain-id PROJECT_DOMAIN_ID For RHEL OpenStack Platform (v3) only --project-domain-name PROJECT_DOMAIN_NAME For RHEL OpenStack Platform (v3) only --provider PROVIDER Providers include Libvirt, Ovirt, EC2, Vmware, Openstack, GCE, AzureRm --public-key PUBLIC_KEY For RHEV only --public-key-path PUBLIC_KEY_PATH Path to a file that contains oVirt public key (For oVirt only) --region REGION For AzureRm eg. 'eastus' and for EC2 only. Use 'us-gov-west-1' for EC2 GovCloud region --secret-key SECRET_KEY Client Secret for AzureRm --server SERVER For VMware --set-console-password SET_CONSOLE_PASSWORD For Libvirt and VMware only One of true/false, yes/no, 1/0. --sub-id SUB_ID Subscription ID for AzureRm --tenant TENANT For RHEL OpenStack Platform and AzureRm only --url URL URL for Libvirt, RHEV and RHEL OpenStack Platform --user USER Username for RHEV, EC2, VMware, RHEL OpenStack Platform. Access Key for EC2. --zone ZONE For GCE only -h, --help Print help
2.14.17. hammer compute-resource virtual-machine
コンピュートリソースの仮想マシンを表示および管理します。
Usage: hammer compute-resource virtual-machine [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: delete, destroy Delete a Virtual Machine info, show Show a virtual machine power Power a Virtual Machine Options: -h, --help Print help
2.14.17.1. hammer compute-resource virtual-machine delete
仮想マシンを削除します。
Usage: hammer compute-resource virtual-machine <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --vm-id VM-ID Virtual machine id, for gce use virtual machine name -h, --help Print help
2.14.17.2. hammer compute-resource virtual-machine info
仮想マシンを表示します。
Usage: hammer compute-resource virtual-machine <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --vm-id VM-ID Virtual machine id, for gce use virtual machine name -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.14.17.3. hammer compute-resource virtual-machine power
仮想マシンの電源を入れます。
Usage: hammer compute-resource virtual-machine power [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --vm-id VM-ID Virtual machine id, for gce use virtual machine name -h, --help Print help
2.14.18. hammer compute-resource virtual-machines
コンピュートリソースで利用可能な仮想マシンを表示します。
Usage: hammer compute-resource virtual-machines [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.14.19. hammer compute-resource vnic-profiles
コンピューティングリソースに利用可能な vnic プロファイルを一覧表示します (RHEV 専用)。
Usage: hammer compute-resource vnic-profiles [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------|-----|---------|----- Vnic profile id | x | x | x Name | x | x | x Network id | x | x | ----------------|-----|---------|-----
2.14.20. hammer compute-resource zones
コンピューティングリソースで利用可能なゾーンを表示します。
Usage: hammer compute-resource zones [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Compute resource name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|-----
2.15. hammer config-group
設定グループを操作します。
Usage: hammer config-group [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a config group delete, destroy Delete a config group info, show Show a config group list, index List of config groups update Update a config group Options: -h, --help Print help
2.15.1. hammer config-group create
設定グループを作成します。
Usage: hammer config-group create [OPTIONS] Options: --name NAME --puppet-class-ids PUPPET_CLASS_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-classes PUPPET_CLASS_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.15.2. hammer config-group delete
設定グループを削除します。
Usage: hammer config-group <delete|destroy> [OPTIONS] Options: --id ID --name NAME Name to search by -h, --help Print help
2.15.3. hammer config-group info
設定グループを表示します。
Usage: hammer config-group <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --name NAME Name to search by -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Puppetclasses/ | x | x | ---------------|-----|---------|-----
2.15.4. hammer config-group list
設定グループの一覧を表示します。
Usage: hammer config-group <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --order ORDER Sort field and order, eg. ‘id DESC’ --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: class string name string
2.15.5. hammer config-group update
設定グループを更新します。
Usage: hammer config-group update [OPTIONS] Options: --id ID --name NAME Name to search by --new-name NEW_NAME --puppet-class-ids PUPPET_CLASS_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-classes PUPPET_CLASS_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.16. hammer config-report
レポートを参照および読み込みます。
Usage: hammer config-report [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: delete, destroy Delete a report info, show Show a report list, index List all reports Options: -h, --help Print help
2.16.1. hammer config-report delete
レポートを削除します。
Usage: hammer config-report <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.16.2. hammer config-report info
レポートを表示します。
Usage: hammer config-report <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: --------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------------------|-----|---------|----- Id | x | x | x Host | x | x | Reported at | x | x | Origin | x | x | Report status/applied | x | x | Report status/restarted | x | x | Report status/failed | x | x | Report status/restart failures | x | x | Report status/skipped | x | x | Report status/pending | x | x | Report metrics/config_retrieval | x | x | Report metrics/exec | x | x | Report metrics/file | x | x | Report metrics/package | x | x | Report metrics/service | x | x | Report metrics/user | x | x | Report metrics/yumrepo | x | x | Report metrics/filebucket | x | x | Report metrics/cron | x | x | Report metrics/total | x | x | Logs/resource | x | x | Logs/message | x | x | --------------------------------|-----|---------|-----
2.16.3. hammer config-report list
レポートの一覧を表示します。
Usage: hammer config-report <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------|-----|---------|----- Id | x | x | x Host | x | x | Last report | x | x | Origin | x | x | Applied | x | x | Restarted | x | x | Failed | x | x | Restart failures | x | x | Skipped | x | x | Pending | x | x | -----------------|-----|---------|----- Search / Order fields: applied integer environment string eventful Values: true, false failed integer failed_restarts integer host string host_id integer hostgroup string hostgroup_fullname string hostgroup_title string last_report datetime location string log text organization string origin string pending integer reported datetime resource text restarted integer skipped integer
2.17. hammer content-credentials
サーバーでコンテンツの認証情報を操作します。
Usage: hammer content-credentials [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a Content Credential delete, destroy Destroy a Content Credential info, show Show a Content Credential list, index List Content Credentials update Update a Content Credential Options: -h, --help Print help
2.17.1. hammer content-credentials create
コンテンツ認証情報を作成します。
Usage: hammer content-credentials create [OPTIONS] Options: --content-type CONTENT_TYPE Type of content: “cert”, “gpg_key” --name NAME Name of the Content Credential --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --path KEY_FILE Key file -h, --help Print help
2.17.2. hammer content-credentials delete
コンテンツ認証情報を破棄します。
Usage: hammer content-credentials <delete|destroy> [OPTIONS] Options: --id ID Content Credential ID --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.17.3. hammer content-credentials info
コンテンツ認証情報を表示します。
Usage: hammer content-credentials <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Content Credential numeric identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: --------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Organization | x | x | Repositories/id | x | x | Repositories/name | x | x | Repositories/content type | x | x | Repositories/product | x | x | Content | x | x | --------------------------|-----|---------|-----
2.17.4. hammer content-credentials list
コンテンツの認証情報を一覧表示します。
Usage: hammer content-credentials <list|index> [OPTIONS] Options: --content-type CONTENT_TYPE Type of content --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --name NAME Name of the Content Credential --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Content type | x | x | -------------|-----|---------|-----
2.17.5. hammer content-credentials update
コンテンツ認証情報を更新します。
Usage: hammer content-credentials update [OPTIONS] Options: --content-type CONTENT_TYPE Type of content: “cert”, “gpg_key” --id ID Content Credential ID --name NAME Name to search by --new-name NEW_NAME Name of the Content Credential --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --path KEY_FILE Key file -h, --help Print help
2.18. hammer content-export
切断された Katello にエクスポートするコンテンツを準備します。
Usage: hammer content-export [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: complete Prepare content for a full export to a disconnected Katello generate-metadata Writes export metadata to disk for use by the importing Katello. This command only needs to be used if the export was performed asynchronously or if the metadata was lost incremental Prepare content for an incremental export to a disconnected Katello list, index View content view export histories Options: -h, --help Print help
2.18.1. hammer content-export complete
切断された Katello に完全にエクスポートするコンテンツを準備します。
Usage: hammer content-export complete [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: library Performs a full export of the organization's library environment version Performs a full export a content view version Options: -h, --help Print help
2.18.1.1. hammer content-export complete library
組織のライブラリー環境への完全エクスポートを実行します。
Usage: hammer content-export complete library [OPTIONS] Options: --async Do not wait for the task --chunk-size-gb CHUNK_SIZE_GB Split the exported content into archives no greater than the specified size in gigabytes. --destination-server DESTINATION_SERVER Destination Server name --fail-on-missing-content Fails if any of the repositories belonging to this organization are unexportable. --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.18.1.2. hammer content-export complete version
コンテンツビューバージョンを完全にエクスポートします。
Usage: hammer content-export complete version [OPTIONS] Options: --async Do not wait for the task --chunk-size-gb CHUNK_SIZE_GB Split the exported content into archives no greater than the specified size in gigabytes. --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --destination-server DESTINATION_SERVER Destination Server name --fail-on-missing-content Fails if any of the repositories belonging to this version are unexportable. --id ID Content view version identifier --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --version VERSION Filter versions by version number. -h, --help Print help
2.18.2. hammer content-export generate-metadata
Katello のインポートで使用するためにエクスポートメタデータをディスクに書き込みます。このコマンドは、エクスポートが非同期的に実行されたか、メタデータが失われた場合にのみ使用する必要があります。
Usage: hammer content-export generate-metadata [OPTIONS] Options: --id ID Generate metadata based on specified export history --task-id TASK_ID Generate metadata based on output of the specified export task -h, --help Print help
2.18.3. hammer content-export incremental
切断された Katello への増分エクスポート用のコンテンツを準備します。
Usage: hammer content-export incremental [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: library Performs an incremental export of the organization's library environment version Performs an incremental export of a content view version Options: -h, --help Print help
2.18.3.1. hammer content-export incremental library
組織のライブラリー環境の増分エクスポートを実行します。
Usage: hammer content-export incremental library [OPTIONS] Options: --async Do not wait for the task --chunk-size-gb CHUNK_SIZE_GB Split the exported content into archives no greater than the specified size in gigabytes. --destination-server DESTINATION_SERVER Destination Server name --fail-on-missing-content Fails if any of the repositories belonging to this organization are unexportable. --from-history-id FROM_HISTORY_ID Export history identifier used for incremental export. If not provided the most recent export history will be used. --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.18.3.2. hammer content-export incremental version
コンテンツビューバージョンの増分エクスポートを実行します。
Usage: hammer content-export incremental version [OPTIONS] Options: --async Do not wait for the task --chunk-size-gb CHUNK_SIZE_GB Split the exported content into archives no greater than the specified size in gigabytes. --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --destination-server DESTINATION_SERVER Destination Server name --fail-on-missing-content Fails if any of the repositories belonging to this version are unexportable. --from-history-id FROM_HISTORY_ID Export history identifier used for incremental export. If not provided the most recent export history will be used. --id ID Content view version identifier --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --version VERSION Filter versions by version number. -h, --help Print help
2.18.4. hammer content-export list
コンテンツビューのエクスポート履歴を表示します。
Usage: hammer content-export <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier --destination-server DESTINATION_SERVER Destination Server name --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --id ID Content view version export history identifier --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string --type TYPE Export Types Possible value(s): 'complete', 'incremental' -h, --help Print help Predefined field sets: ------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------------------|-----|---------|----- Id | x | x | x Destination server | x | x | Path | x | x | Type | x | x | Content view version | x | x | Content view version id | x | x | Created at | x | x | Updated at | x | x | ------------------------|-----|---------|----- Search / Order fields: content_view_id integer content_view_version_id integer id integer type string
2.19. hammer content-import
アップストリームアーカイブからコンテンツをインポートします。
Usage: hammer content-import [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: library Imports a content archive to an organization's library lifecycle environment list, index View content view import histories version Imports a content archive to a content view version Options: -h, --help Print help
2.19.1. hammer content-import library
コンテンツのライブラリーライフサイクル環境にコンテンツアーカイブをインポートします。
Usage: hammer content-import library [OPTIONS] Options: --async Do not wait for the task --metadata-file METADATA_FILE Location of the metadata.json file. This is not required if the metadata.json file is already in the archive directory. --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --path PATH Directory containing the exported Content View Version -h, --help Print help
2.19.2. hammer content-import list
コンテンツビューのインポート履歴を表示します。
Usage: hammer content-import <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --id ID Content view version import history identifier --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string --type TYPE Import Types Possible value(s): 'complete', 'incremental' -h, --help Print help Predefined field sets: ------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------------------|-----|---------|----- Id | x | x | x Path | x | x | Type | x | x | Content view version | x | x | Content view version id | x | x | Created at | x | x | Updated at | x | x | ------------------------|-----|---------|----- Search / Order fields: content_view_id integer content_view_version_id integer id integer type string
2.19.3. hammer content-import version
コンテンツアーカイブをコンテンツビューバージョンにインポートします。
Usage: hammer content-import version [OPTIONS] Options: --async Do not wait for the task --metadata-file METADATA_FILE Location of the metadata.json file. This is not required if the metadata.json file is already in the archive directory. --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --path PATH Directory containing the exported Content View Version -h, --help Print help
2.20. hammer content-view
コンテンツビューを操作します。
Usage: hammer content-view [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-repository Associate a resource add-version Add a content view version to a composite view component View and manage components copy Copy a content view create Create a content view delete Delete a content view filter View and manage filters info, show Show a content view list, index List content views publish Publish a content view purge Delete old versions of a content view remove Remove versions and/or environments from a content view and reassign systems and keys remove-from-environment Remove a content view from an environment remove-repository Disassociate a resource remove-version Remove a content view version from a composite view update Update a content view version View and manage content view versions Options: -h, --help Print help
2.20.1. hammer content-view add-repository
リソースを関連付けます。
Usage: hammer content-view add-repository [OPTIONS] Options: --id ID Content view numeric identifier --name NAME Content view name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository ID -h, --help Print help
2.20.2. hammer content-view add-version
コンテンツビューバージョンを複合ビューに追加します。
Usage: hammer content-view add-version [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view id to search by --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier --id ID Content view numeric identifier --name NAME Content view name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help
2.20.3. hammer content-view component
コンポーネントを表示および管理します。
Usage: hammer content-view component [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add Add components to the content view list, index List components attached to this content view remove Remove components from the content view update Update a component associated with the content view Options: -h, --help Print help
2.20.3.1. hammer content-view component add
コンポーネントをコンテンツビューに追加します。
Usage: hammer content-view component add [OPTIONS] Options: --component-content-view COMPONENT_CONTENT_VIEW_NAME Content View name of the component who's latest version is desired --component-content-view-id COMPONENT_CONTENT_VIEW_ID Content View identifier of the component who's latest version is desired --component-content-view-version COMPONENT_CONTENT_VIEW_VERSION_VERSION Content View Version number of the component. Either use this or --component-content-view-version-id option --component-content-view-version-id COMPONENT_CONTENT_VIEW_VERSION_ID Content View Version identifier of the component --composite-content-view COMPOSITE_CONTENT_VIEW_NAME Name of the composite content view --composite-content-view-id COMPOSITE_CONTENT_VIEW_ID Composite content view identifier --latest Select the latest version of the components content view is desired --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help
2.20.3.2. hammer content-view component list
このコンテンツビューに割り当てられたコンポーネントの一覧を表示します。
Usage: hammer content-view component <list|index> [OPTIONS] Options: --composite-content-view COMPOSITE_CONTENT_VIEW_NAME Name of the composite content view --composite-content-view-id COMPOSITE_CONTENT_VIEW_ID Composite content view identifier --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help Predefined field sets: ----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------|-----|---------|----- Id | x | x | x Name | x | x | Version | x | x | Current version | x | x | Version id | x | x | ----------------|-----|---------|-----
2.20.3.3. hammer content-view component remove
コンテンツビューからコンポーネントを削除します。
Usage: hammer content-view component remove [OPTIONS] Options: --component-content-view-ids COMPONENT_CONTENT_VIEW_IDs Array of component content view identfiers to remove. Comma separated list of values --component-content-views COMPONENT_CONTENT_VIEW_NAMES Array of component content view names to remove. Comma separated list of values --component-ids COMPONENT_IDS Array of content view component IDs to remove. Identifier of the component association Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --composite-content-view COMPOSITE_CONTENT_VIEW_NAME Name of the composite content view --composite-content-view-id COMPOSITE_CONTENT_VIEW_ID Composite content view identifier --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help
2.20.3.4. hammer content-view component update
コンテンツビューに関連付けられたコンポーネントを更新します。
Usage: hammer content-view component update [OPTIONS] Options: --component-content-view COMPONENT_CONTENT_VIEW_NAME Content View name of the component who's latest version is desired --component-content-view-id COMPONENT_CONTENT_VIEW_ID Content View identifier of the component who's latest version is desired --component-content-view-version COMPONENT_CONTENT_VIEW_VERSION_VERSION Content View Version number of the component. Either use this or --component-content-view-version-id option --component-content-view-version-id COMPONENT_CONTENT_VIEW_VERSION_ID Content View Version identifier of the component --composite-content-view COMPOSITE_CONTENT_VIEW_NAME Name of the composite content view --composite-content-view-id COMPOSITE_CONTENT_VIEW_ID Composite content view identifier --id ID Content view component ID. Identifier of the component association --latest Select the latest version of the components content view is desired --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help
2.20.4. hammer content-view copy
コンテンツビューをコピーします。
Usage: hammer content-view copy [OPTIONS] Options: --id ID Content view numeric identifier --name NAME Content view name to search by --new-name NEW_NAME New content view name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help
2.20.5. hammer content-view create
コンテンツビューを作成します。
Usage: hammer content-view create [OPTIONS] Options: --auto-publish AUTO_PUBLISH Enable/Disable auto publish of composite view One of true/false, yes/no, 1/0. --component-ids COMPONENT_IDS List of component content view version ids for composite views Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --composite Create a composite content view --description DESCRIPTION Description for the content view --import-only Designate this Content View for importing from upstream servers only. --label LABEL Content view label --name NAME Name of the content view --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --repository-ids REPOSITORY_IDS List of repository ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --solve-dependencies SOLVE_DEPENDENCIES Solve RPM dependencies by default on Content View publish, defaults to false One of true/false, yes/no, 1/0. -h, --help Print help
2.20.6. hammer content-view delete
コンテンツビューを削除します。
Usage: hammer content-view delete [OPTIONS] Options: --async Do not wait for the task --id ID Content view numeric identifier --name NAME Content view name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help
2.20.7. hammer content-view filter
フィルターを表示および管理します。
Usage: hammer content-view filter [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-repository Associate a resource create Create a filter for a content view delete, destroy Delete a filter info, show Show filter info list, index List filters remove-repository Disassociate a resource rule View and manage filter rules update Update a filter Options: -h, --help Print help
2.20.7.1. hammer content-view filter add-repository
リソースを関連付けます。
Usage: hammer content-view filter add-repository [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --id ID Filter identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository ID -h, --help Print help
2.20.7.2. hammer content-view filter create
コンテンツビューのフィルターを作成します。
Usage: hammer content-view filter create [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view identifier --description DESCRIPTION Description of the filter --inclusion INCLUSION Specifies if content should be included or excluded, default: inclusion=false One of true/false, yes/no, 1/0. --name NAME Name of the filter --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --original-module-streams ORIGINAL_MODULE_STREAMS Add all module streams without errata to the included/excluded list. (module stream filter only) One of true/false, yes/no, 1/0. --original-packages ORIGINAL_PACKAGES Add all packages without errata to the included/excluded list. (package filter only) One of true/false, yes/no, 1/0. --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repositories REPOSITORY_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --repository-ids REPOSITORY_IDS List of repository ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --type TYPE Type of filter (e.g. rpm, package_group, erratum, docker, modulemd) -h, --help Print help
2.20.7.3. hammer content-view filter delete
フィルターを削除します。
Usage: hammer content-view filter <delete|destroy> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view identifier --id ID Filter identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help
2.20.7.4. hammer content-view filter info
フィルター情報を表示します。
Usage: hammer content-view filter <info|show> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view identifier --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Filter identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help Predefined field sets: ----------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------|-----|---------|----- Filter id | x | x | x Name | x | x | x Type | x | x | Inclusion | x | x | Description | x | x | Repositories/id | x | x | Repositories/name | x | x | Repositories/label | x | x | Rules/id | x | x | Rules/name | x | x | Rules/version | x | x | Rules/minimum version | x | x | Rules/maximum version | x | x | Rules/errata id | x | x | Rules/start date | x | x | Rules/end date | x | x | Rules/types | x | x | Rules/created | x | x | Rules/updated | x | x | ----------------------|-----|---------|-----
2.20.7.5. hammer content-view filter list
フィルターの一覧を表示します。
Usage: hammer content-view filter <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view identifier --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --name NAME Filter content view filters by name --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string --types TYPES Types of filters Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Filter id | x | x | x Name | x | x | x Description | x | x | Type | x | x | Inclusion | x | x | ------------|-----|---------|----- Search / Order fields: content_type Values: rpm, package_group, erratum, docker, modulemd inclusion_type Values: include, exclude name string
2.20.7.6. hammer content-view filter remove-repository
リソースの関連付けを解除します。
Usage: hammer content-view filter remove-repository [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --id ID Filter identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository ID -h, --help Print help
2.20.7.7. hammer content-view filter rule
フィルタールールを表示および管理します。
Usage: hammer content-view filter rule [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a filter rule. The parameters included should be based upon the filter type. delete, destroy Delete a filter rule info, show Show filter rule info list, index List filter rules update Update a filter rule. The parameters included should be based upon the filter type. Options: -h, --help Print help
2.20.7.7.1. hammer content-view filter rule create
フィルタールールを作成します。組み込まれるパラメーターはフィルタータイプに基づくものでなければなりません。
Usage: hammer content-view filter rule create [OPTIONS] Options: --architecture ARCHITECTURE Package: architecture --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier --content-view-id CONTENT_VIEW_ID --date-type DATE_TYPE Erratum: search using the 'Issued On' or 'Updated On' column of the errata. Values are 'issued'/'updated' --end-date END_DATE Erratum: end date (YYYY-MM-DD) --errata-id ERRATA_ID Erratum: id --errata-ids ERRATA_IDS Erratum: IDs or a select all object Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --max-version MAX_VERSION Package: maximum version --min-version MIN_VERSION Package: minimum version --module-stream-ids MODULE_STREAM_IDS Module stream ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Package, package group, or docker tag names Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --names NAMES Package and package group names --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --start-date START_DATE Erratum: start date (YYYY-MM-DD) --types TYPES Erratum: types (enhancement, bugfix, security) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --uuid UUID Package group: uuid --version VERSION Package: version -h, --help Print help
2.20.7.7.2. hammer content-view filter rule delete
フィルタールールを削除します。
Usage: hammer content-view filter rule <delete|destroy> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier --content-view-id CONTENT_VIEW_ID --id ID Rule identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help
2.20.7.7.3. hammer content-view filter rule info
フィルタールール情報を表示します。
Usage: hammer content-view filter rule <info|show> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier --content-view-id CONTENT_VIEW_ID --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Rule identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help Predefined field sets: ----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------|-----|---------|----- Rule id | x | x | x Filter id | x | x | Name | x | x | x Version | x | x | Minimum version | x | x | Maximum version | x | x | Architecture | x | x | Errata id | x | x | Start date | x | x | End date | x | x | Date type | x | x | Types | x | x | Created | x | x | Updated | x | x | ----------------|-----|---------|-----
2.20.7.7.4. hammer content-view filter rule list
フィルタールールを一覧表示します。
Usage: hammer content-view filter rule <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier --content-view-id CONTENT_VIEW_ID --errata-id ERRATA_ID Errata_id of the content view filter rule --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --name NAME Name of the content view filter rule --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string -h, --help Print help Predefined field sets: ----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------|-----|---------|----- Rule id | x | x | x Filter id | x | x | Name | x | x | x Version | x | x | Minimum version | x | x | Maximum version | x | x | Architecture | x | x | Errata id | x | x | Start date | x | x | End date | x | x | ----------------|-----|---------|-----
2.20.7.7.5. hammer content-view filter rule update
フィルタールールを更新します。組み込まれるパラメーターはフィルタータイプに基づくものでなければなりません。
Usage: hammer content-view filter rule update [OPTIONS] Options: --architecture ARCHITECTURE Package: architecture --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier --content-view-id CONTENT_VIEW_ID --end-date END_DATE Erratum: end date (YYYY-MM-DD) --errata-id ERRATA_ID Erratum: id --id ID Rule identifier --max-version MAX_VERSION Package: maximum version --min-version MIN_VERSION Package: minimum version --name NAME Name to search by --new-name NEW_NAME Package, package group, or docker tag: name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --start-date START_DATE Erratum: start date (YYYY-MM-DD) --types TYPES Erratum: types (enhancement, bugfix, security) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --version VERSION Package: version -h, --help Print help
2.20.7.8. hammer content-view filter update
フィルターを更新します。
Usage: hammer content-view filter update [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view identifier --description DESCRIPTION Description of the filter --id ID Filter identifier --inclusion INCLUSION Specifies if content should be included or excluded, default: inclusion=false One of true/false, yes/no, 1/0. --name NAME Name to search by --new-name NEW_NAME New name for the filter --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --original-module-streams ORIGINAL_MODULE_STREAMS Add all module streams without errata to the included/excluded list. (module stream filter only) One of true/false, yes/no, 1/0. --original-packages ORIGINAL_PACKAGES Add all packages without errata to the included/excluded list. (package filter only) One of true/false, yes/no, 1/0. --repositories REPOSITORY_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --repository-ids REPOSITORY_IDS List of repository ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.20.8. hammer content-view info
コンテンツビューを表示します。
Usage: hammer content-view <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Content view numeric identifier --name NAME Content view name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help Predefined field sets: -----------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Label | x | x | Composite | x | x | Description | x | x | Content host count | x | x | Solve dependencies | x | x | Organization | x | x | Yum repositories/id | x | x | Yum repositories/name | x | x | Yum repositories/label | x | x | Container image repositories/id | x | x | Container image repositories/name | x | x | Container image repositories/label | x | x | Ostree repositories/id | x | x | Ostree repositories/name | x | x | Ostree repositories/label | x | x | Lifecycle environments/id | x | x | Lifecycle environments/name | x | x | Versions/id | x | x | Versions/version | x | x | Versions/published | x | x | Components/id | x | x | Components/name | x | x | Activation keys/ | x | x | -----------------------------------|-----|---------|-----
2.20.9. hammer content-view list
コンテンツビューの一覧を表示します。
Usage: hammer content-view <list|index> [OPTIONS] Options: --composite COMPOSITE Filter only composite content views One of true/false, yes/no, 1/0. --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name NAME Name of the content view --noncomposite NONCOMPOSITE Filter out composite content views One of true/false, yes/no, 1/0. --nondefault NONDEFAULT Filter out default content views One of true/false, yes/no, 1/0. --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string --without WITHOUT Do not include this array of content views Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help Predefined field sets: ----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------|-----|---------|----- Content view id | x | x | x Name | x | x | x Label | x | x | Composite | x | x | Last published | x | x | Repository ids | x | x | ----------------|-----|---------|----- Search / Order fields: composite boolean label string name string organization_id integer
2.20.10. hammer content-view publish
コンテンツビューを公開します。
Usage: hammer content-view publish [OPTIONS] Options: --async Do not wait for the task --description DESCRIPTION Description for the new published content view version --id ID Content view identifier --major MAJOR Override the major version number --minor MINOR Override the minor version number --name NAME Content view name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --repos-units REPOS_UNITS Specify the list of units in each repo Comma separated list of values defined by a schema. See Option details section below. JSON is acceptable and preferred way for complex parameters -h, --help Print help Option details: Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value): --repos-units "label=<string>\,rpm_filenames=<array>, ... "
2.20.11. hammer content-view purge
古いバージョンのコンテンツビューを削除します。
Usage: hammer content-view purge [OPTIONS] Options: --async Do not wait for the task --count COUNT Count of unused versions to keep Default: 3 --id ID Content View numeric identifier --name NAME Content View name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help
2.20.12. hammer content-view remove
コンテンツビューからバージョンや環境を削除し、システムおよびキーを再度割り当てます。
Usage: hammer content-view remove [OPTIONS] Options: --async Do not wait for the task --content-view-version-ids CONTENT_VIEW_VERSION_IDS Content view version identifiers to be deleted Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --content-view-versions CONTENT_VIEW_VERSION_VERSIONS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --environment-ids ENVIRONMENT_IDS (--environment-ids is deprecated: Use --lifecycle-environment-ids instead) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --environments ENVIRONMENT_NAMES (--environments is deprecated: Use --lifecycle-environments instead) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Content view numeric identifier --key-content-view-id KEY_CONTENT_VIEW_ID Content view to reassign orphaned activation keys to --key-environment-id KEY_ENVIRONMENT_ID Environment to reassign orphaned activation keys to --lifecycle-environment-ids LIFECYCLE_ENVIRONMENT_IDS Environment numeric identifiers to be removed Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --lifecycle-environments LIFECYCLE_ENVIRONMENT_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Content view name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --system-content-view-id SYSTEM_CONTENT_VIEW_ID Content view to reassign orphaned systems to --system-environment-id SYSTEM_ENVIRONMENT_ID Environment to reassign orphaned systems to -h, --help Print help
2.20.13. hammer content-view remove-from-environment
環境からコンテンツビューを削除します。
Usage: hammer content-view remove-from-environment [OPTIONS] Options: --async Do not wait for the task --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --id ID Content view numeric identifier --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name NAME Content view name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help
2.20.14. hammer content-view remove-repository
リソースの関連付けを解除します。
Usage: hammer content-view remove-repository [OPTIONS] Options: --id ID Content view numeric identifier --name NAME Content view name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository ID -h, --help Print help
2.20.15. hammer content-view remove-version
複合ビューからコンテンツビューのバージョンを削除します。
Usage: hammer content-view remove-version [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier --id ID Content view numeric identifier --name NAME Content view name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by -h, --help Print help
2.20.16. hammer content-view update
コンテンツビューを更新します。
Usage: hammer content-view update [OPTIONS] Options: --auto-publish AUTO_PUBLISH Enable/Disable auto publish of composite view One of true/false, yes/no, 1/0. --component-ids COMPONENT_IDS List of component content view version ids for composite views Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --description DESCRIPTION Description for the content view --id ID Content view identifier --import-only IMPORT_ONLY Designate this Content View for importing from upstream servers only. Defaults to false One of true/false, yes/no, 1/0. --name NAME Content view name to search by --new-name NEW_NAME New name for the content view --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --repository-ids REPOSITORY_IDS List of repository ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --solve-dependencies SOLVE_DEPENDENCIES Solve RPM dependencies by default on Content View publish, defaults to false One of true/false, yes/no, 1/0. -h, --help Print help
2.20.17. hammer content-view version
コンテンツビューのバージョンを表示および管理します。
Usage: hammer content-view version [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: delete Remove content view version incremental-update Perform an Incremental Update on one or more Content View Versions info, show Show content view version list, index List content view versions promote Promote a content view version republish-repositories Forces a republish of the version's repositories' metadata update Update a content view version Options: -h, --help Print help
2.20.17.1. hammer content-view version delete
コンテンツビューバージョンを削除します。
Usage: hammer content-view version delete [OPTIONS] Options: --async Do not wait for the task --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --id ID Content view version identifier --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --version VERSION Content view version number -h, --help Print help
2.20.17.2. hammer content-view version incremental-update
1 つ以上のコンテンツビューバージョンで増分更新を実行します。
Usage: hammer content-view version incremental-update [OPTIONS] Options: --async Do not wait for the task --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content View Version Ids to perform an incremental update on. May contain composites as well as one or more components to update. --deb-ids DEB_IDS Deb Package ids to copy into the new versions Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --debs DEB_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --description DESCRIPTION The description for the new generated Content View Versions --errata-ids ERRATA_IDS Errata ids to copy into the new versions Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host-ids HOST_IDS IDs of hosts to update Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --lifecycle-environment-ids ENVIRONMENT_IDS List of lifecycle environment IDs to update the content view version in Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --lifecycle-environments ENVIRONMENTS List of lifecycle environment names to update the content view version in Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Organization name for resolving lifecycle environment names --organization-id ORGANIZATION_ID Organization id for resolving lifecycle environment names --package-ids PACKAGE_IDS Package ids to copy into the new versions Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --packages PACKAGE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --propagate-all-composites PROPAGATE_ALL_COMPOSITES If true, will publish a new composite version using any specified content_view_version_id that has been promoted to a lifecycle environment One of true/false, yes/no, 1/0. --resolve-dependencies RESOLVE_DEPENDENCIES If true, when adding the specified errata or packages, any needed dependencies will be copied as well. Defaults to true One of true/false, yes/no, 1/0. --update-all-hosts UPDATE Update all editable and applicable hosts within the specified Content View and \ Lifecycle Environments One of true/false, yes/no, 1/0. -h, --help Print help
2.20.17.3. hammer content-view version info
コンテンツビューバージョンを表示します。
Usage: hammer content-view version <info|show> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Content view version identifier --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --version VERSION Content view version number -h, --help Print help Predefined field sets: -----------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------------------|-----|---------|----- Id | x | x | x Name | x | x | Version | x | x | x Description | x | x | Content view id | x | x | Content view name | x | x | Content view label | x | x | Lifecycle environments/id | x | x | Lifecycle environments/name | x | x | Lifecycle environments/label | x | x | Repositories/id | x | x | Repositories/name | x | x | Repositories/label | x | x | -----------------------------|-----|---------|-----
2.20.17.4. hammer content-view version list
コンテンツビューのバージョンを一覧表示します。
Usage: hammer content-view version <list|index> [OPTIONS] Options: --composite-version-id COMPOSITE_VERSION_ID Filter versions that are components in the specified composite version --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view identifier --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string --triggered-by-id TRIGGERED_BY_ID Filter composite versions whose publish was triggered by the specified component version --version VERSION Filter versions by version number -h, --help Print help Predefined field sets: -----------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------------|-----|---------|----- Id | x | x | x Name | x | x | Version | x | x | x Description | x | x | Lifecycle environments | x | x | -----------------------|-----|---------|----- Search / Order fields: content_view_id integer repository string version string
2.20.17.5. hammer content-view version promote
コンテンツビューバージョンをプロモートします。
Usage: hammer content-view version promote [OPTIONS] Options: --async Do not wait for the task --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --description DESCRIPTION The description for the content view version promotion --force Force content view promotion and bypass lifecycle environment restriction --from-lifecycle-environment FROM_ENVIRONMENT_ID Environment name from where to promote its version from (if version is unknown) --from-lifecycle-environment-id FROM_ENVIRONMENT_ID Id of the environment from where to promote its version from (if version is unknown) --id ID Content view version identifier --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --to-lifecycle-environment TO_ENVIRONMENT Name of the target environment --to-lifecycle-environment-id TO_ENVIRONMENT_ID Id of the target environment --version VERSION Content view version number -h, --help Print help
2.20.17.6. hammer content-view version republish-repositories
バージョンのリポジトリーのメタデータを強制的に再公開します。
Usage: hammer content-view version republish-repositories [OPTIONS] Options: --async Do not wait for the task --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --force FORCE Force metadata regeneration to proceed. Dangerous when repositories use mirror on sync. One of true/false, yes/no, 1/0. --id ID Content view version identifier --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --version VERSION Content view version number -h, --help Print help
2.20.17.7. hammer content-view version update
コンテンツビューのバージョンを更新します。
Usage: hammer content-view version update [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --description DESCRIPTION The description for the content view version --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --id ID Content view version identifier --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --new-version NEW_VERSION --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --version VERSION Content view version number -h, --help Print help
2.21. hammer deb-package
deb パッケージを操作します。
Usage: hammer deb-package [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show a deb list, index List debs Options: -h, --help Print help
2.21.1. hammer deb-package info
deb を表示します。
Usage: hammer deb-package <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID A deb identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier -h, --help Print help Predefined field sets: ----------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------|-----|---------|----- Id | x | x | x Pulp id | x | x | Uuid | x | x | Name | x | x | x Version | x | x | Checksum | x | x | Architecture | x | x | Nav | x | x | Nva | x | x | Filename | x | x | Available host count | x | x | Applicable host count | x | x | Description | x | x | ----------------------|-----|---------|-----
2.21.2. hammer deb-package list
deb の一覧を表示します。
Usage: hammer deb-package <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Content view filter identifier --content-view-filter-rule CONTENT_VIEW_FILTER_RULE_NAME Name to search by --content-view-filter-rule-id CONTENT_VIEW_FILTER_RULE_ID Content view filter rule identifier --content-view-id CONTENT_VIEW_ID Content view numeric identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --ids IDS Ids to filter content by Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --include-filter-ids INCLUDE_FILTER_IDS Includes associated content view filter ids in response One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier --search SEARCH Search string -h, --help Print help Predefined field sets: ---------|-----|-------- FIELDS | ALL | DEFAULT ---------|-----|-------- Id | x | x Filename | x | x ---------|-----|--------
2.22. hammer defaults
デフォルト設定を管理します。
Usage: hammer defaults [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add Add a default parameter to config delete Delete a default param list List all the default parameters providers List all the providers Options: -h, --help Print help
2.22.1. hammer defaults add
デフォルトパラメーターを設定に追加します。
Usage: hammer defaults add [OPTIONS] Options: --param-name OPTION_NAME The name of the default option (e.g. organization_id) --param-value OPTION_VALUE The value for the default option --provider OPTION_PROVIDER The name of the provider providing the value. For list available providers see `hammer defaults providers` -h, --help Print help
2.22.2. hammer defaults delete
デフォルトパラメーターを削除します。
Usage: hammer defaults delete [OPTIONS] Options: --param-name OPTION_NAME The name of the default option -h, --help Print help
2.22.3. hammer defaults list
デフォルトパラメーターの一覧を表示します。
Usage: hammer defaults list [OPTIONS] Options: -h, --help Print help
2.22.4. hammer defaults providers
プロバイダーの一覧を表示します。
Usage: hammer defaults providers [OPTIONS] Options: -h, --help Print help
2.23. hammer discovery
検出されたホストを操作します。
Usage: hammer discovery [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: auto-provision Auto provision a host delete, destroy Delete a discovered host facts List all fact values info, show Show a discovered host list, index List all discovered hosts provision Provision a discovered host reboot Reboot a host refresh-facts Refresh the facts of a host Options: -h, --help Print help
2.23.1. hammer discovery auto-provision
ホストの自動プロビジョニングを行います。
Usage: hammer discovery auto-provision [OPTIONS] Options: --all Auto provision all discovered hosts --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.23.2. hammer discovery delete
検出されたホストを削除します。
Usage: hammer discovery <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.23.3. hammer discovery facts
ファクト値の一覧を表示します。
Usage: hammer discovery facts [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|-------- FIELDS | ALL | DEFAULT -------|-----|-------- Fact | x | x Value | x | x -------|-----|-------- Search / Order fields: fact string fact_short_name string facts string host string host.hostgroup string host_id integer location string location_id integer name string organization string organization_id integer origin string reported_at datetime short_name string type string value string
2.23.4. hammer discovery info
検出されたホストを表示します。
Usage: hammer discovery <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Mac | x | x | Cpus | x | x | Memory | x | x | Disk count | x | x | Disks size | x | x | Subnet | x | x | Last report | x | x | Ip | x | x | Model | x | x | Organization | x | x | Location | x | x | -------------|-----|---------|-----
2.23.5. hammer discovery list
検出されたホストの一覧を表示します。
Usage: hammer discovery <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort results --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Paginate results --per-page PER_PAGE Number of entries per request --search SEARCH Filter results -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Mac | x | x | Cpus | x | x | Memory | x | x | Disk count | x | x | Disks size | x | x | Subnet | x | x | Last report | x | x | ------------|-----|---------|-----
2.23.6. hammer discovery provision
検出されたホストをプロビジョニングします。
Usage: hammer discovery provision [OPTIONS] Options: --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID Required if host is managed and value is not inherited from host group --ask-root-password ASK_ROOT_PW One of true/false, yes/no, 1/0. --build BUILD One of true/false, yes/no, 1/0. --capabilities CAPABILITIES --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Required if host is managed and value is not inherited from host group --enabled ENABLED One of true/false, yes/no, 1/0. --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID --hostgroup-title HOSTGROUP_TITLE Hostgroup title --id ID --image IMAGE_NAME Name to search by --image-id IMAGE_ID --interface INTERFACE Interface parameters Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters Can be specified multiple times. --ip IP Not required if using a subnet with DHCP Capsule --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --mac MAC Not required if it's a virtual machine --managed MANAGED One of true/false, yes/no, 1/0. --medium MEDIUM_NAME Medium name --medium-id MEDIUM_ID Required if not imaged based provisioning and host is managed and value is not inherited from host group --model MODEL_NAME Model name --model-id MODEL_ID --name NAME Name to search by --new-name NEW_NAME --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID Required if host is managed and value is not inherited from host group --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --overwrite OVERWRITE One of true/false, yes/no, 1/0. --owner-id OWNER_ID --owner-type OWNER_TYPE Host's owner type Possible value(s): 'User', 'Usergroup' --parameters PARAMS Host parameters Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --partition-table PARTITION_TABLE_NAME Partition table name --partition-table-id PARTITION_TABLE_ID --progress-report-id PROGRESS_REPORT_ID UUID to track orchestration tasks status, GET /api/orchestration/:UUID/tasks --provision-method METHOD Possible value(s): 'build', 'image' --puppet-ca-proxy-id PUPPET_CA_PROXY_ID --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --puppet-proxy-id PUPPET_PROXY_ID --puppetclass-ids PUPPETCLASS_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --pxe-loader PXE_LOADER DHCP filename option (Grub2 or PXELinux by default) Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'Grub2 UEFI HTTP', 'Grub2 UEFI HTTPS', 'Grub2 UEFI HTTPS SecureBoot', 'iPXE Embedded', 'iPXE UEFI HTTP', 'iPXE Chain BIOS', 'iPXE Chain UEFI' --root-password ROOT_PW --sp-subnet-id SP_SUBNET_ID --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID Required if host is managed and value is not inherited from host group -h, --help Print help
2.23.7. hammer discovery reboot
ホストを再起動します。
Usage: hammer discovery reboot [OPTIONS] Options: --all Reboot all discovered hosts --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.23.8. hammer discovery refresh-facts
ホストのファクトをリフレッシュします。
Usage: hammer discovery refresh-facts [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.24. hammer discovery-rule
検出されたルールを操作します。
Usage: hammer discovery-rule [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a discovery rule delete, destroy Delete a rule info, show Show a discovery rule list, index List all discovery rules update Update a rule Options: -h, --help Print help
2.24.1. hammer discovery-rule create
検出ルールを作成します。
Usage: hammer discovery-rule create [OPTIONS] Options: --enabled ENABLED Flag is used for temporary shutdown of rules One of true/false, yes/no, 1/0. --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID The hostgroup that is used to auto provision a host --hostgroup-title HOSTGROUP_TITLE Hostgroup title --hostname HOSTNAME Defines a pattern to assign human-readable hostnames to the matching hosts --hosts-limit HOSTS_LIMIT --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS Location ID for provisioned hosts Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --max-count MAX_COUNT Enables to limit maximum amount of provisioned hosts per rule --name NAME Represents rule name shown to the users --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS Organization ID for provisioned hosts Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --priority PRIORITY Puts the rules in order, low numbers go first. Must be greater then zero --search SEARCH Query to match discovered hosts for the particular rule -h, --help Print help
2.24.2. hammer discovery-rule delete
ルールを削除します。
Usage: hammer discovery-rule <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.24.3. hammer discovery-rule info
検出ルールを表示します。
Usage: hammer discovery-rule <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------------|-----|---------|----- Id | x | x | x Name | x | x | x Priority | x | x | Search | x | x | Host group | x | x | Hosts limit | x | x | Enabled | x | x | Hostname template | x | x | Hosts/ | x | x | Locations/ | x | x | Organizations/ | x | x | ------------------|-----|---------|-----
2.24.4. hammer discovery-rule list
検出ルールの一覧を表示します。
Usage: hammer discovery-rule <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort results --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Paginate results --per-page PER_PAGE Number of entries per request --search SEARCH Filter results -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Priority | x | x | Search | x | x | Host group | x | x | Hosts limit | x | x | Enabled | x | x | ------------|-----|---------|-----
2.24.5. hammer discovery-rule update
ルールを更新します。
Usage: hammer discovery-rule update [OPTIONS] Options: --enabled ENABLED Flag is used for temporary shutdown of rules One of true/false, yes/no, 1/0. --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID The hostgroup that is used to auto provision a host --hostgroup-title HOSTGROUP_TITLE Hostgroup title --hostname HOSTNAME Defines a pattern to assign human-readable hostnames to the matching hosts --hosts-limit HOSTS_LIMIT --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS Location ID for provisioned hosts Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --max-count MAX_COUNT Enables to limit maximum amount of provisioned hosts per rule --name NAME Name to search by --new-name NEW_NAME Represents rule name shown to the users --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS Organization ID for provisioned hosts Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --priority PRIORITY Puts the rules in order, low numbers go first. Must be greater then zero --search SEARCH Query to match discovered hosts for the particular rule -h, --help Print help
2.25. hammer docker
Docker コンテナーを操作します。
Usage: hammer docker [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: manifest Manage docker manifests tag Manage docker tags Options: -h, --help Print help
2.25.1. hammer docker manifest
docker マニフェストを管理します。
Usage: hammer docker manifest [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show a docker manifest list, index List docker_manifests Options: -h, --help Print help
2.25.1.1. hammer docker manifest info
docker マニフェストを表示します。
Usage: hammer docker manifest <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID A docker manifest identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Schema version | x | x | Digest | x | x | Downloaded | x | x | Tags/name | x | x | ---------------|-----|---------|-----
2.25.1.2. hammer docker manifest list
docker マニフェストの一覧を表示します。
Usage: hammer docker manifest <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Content view filter identifier --content-view-filter-rule CONTENT_VIEW_FILTER_RULE_NAME Name to search by --content-view-filter-rule-id CONTENT_VIEW_FILTER_RULE_ID Content view filter rule identifier --content-view-id CONTENT_VIEW_ID Content view numeric identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --ids IDS Ids to filter content by Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --include-filter-ids INCLUDE_FILTER_IDS Includes associated content view filter ids in response One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier --search SEARCH Search string -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Schema version | x | x | Digest | x | x | Downloaded | x | x | Tags | x | x | ---------------|-----|---------|-----
2.25.2. hammer docker tag
Docker Tags を管理します。
Usage: hammer docker tag [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show a docker tag list, index List docker_tags Options: -h, --help Print help
2.25.2.1. hammer docker tag info
docker タグを表示します。
Usage: hammer docker tag <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID A docker tag identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier -h, --help Print help Predefined field sets: ---------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------------|-----|---------|----- Id | x | x | x Tag | x | x | x Repository id | x | x | Docker manifest id | x | x | Docker manifest name | x | x | ---------------------|-----|---------|-----
2.25.2.2. hammer docker tag list
docker タグを一覧表示します。
Usage: hammer docker tag <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Content view filter identifier --content-view-filter-rule CONTENT_VIEW_FILTER_RULE_NAME Name to search by --content-view-filter-rule-id CONTENT_VIEW_FILTER_RULE_ID Content view filter rule identifier --content-view-id CONTENT_VIEW_ID Content view numeric identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --ids IDS Ids to filter content by Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --include-filter-ids INCLUDE_FILTER_IDS Includes associated content view filter ids in response One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier --search SEARCH Search string -h, --help Print help Predefined field sets: --------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------|-----|---------|----- Id | x | x | x Tag | x | x | x Repository id | x | x | --------------|-----|---------|-----
2.26. hammer domain
ドメインを操作します。
Usage: hammer domain [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a domain delete, destroy Delete a domain delete-parameter Delete parameter for a domain info, show Show a domain list, index List of domains set-parameter Create or update parameter for a domain update Update a domain Options: -h, --help Print help
2.26.1. hammer domain create
ドメインを作成します。
Usage: hammer domain create [OPTIONS] Options: --description DESC Full name describing the domain --dns DNS_NAME Name of DNS proxy to use within this domain --dns-id DNS_ID ID of DNS proxy to use within this domain --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME The full DNS domain name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.26.2. hammer domain delete
ドメインを削除します。
Usage: hammer domain <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Domain name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.26.3. hammer domain delete-parameter
ドメインのパラメーターを削除します。
Usage: hammer domain delete-parameter [OPTIONS] Options: --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Numerical ID or domain name --name NAME Parameter name -h, --help Print help
2.26.4. hammer domain info
ドメインを表示します。
Usage: hammer domain <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Numerical ID or domain name --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Domain name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Description | x | x | Dns id | x | x | Subnets/ | x | x | Locations/ | x | x | Organizations/ | x | x | Parameters/ | x | x | Created at | x | x | Updated at | x | x | ---------------|-----|---------|-----
2.26.5. hammer domain list
ドメインを一覧表示します。
Usage: hammer domain <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID ID of subnet -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: fullname string location string location_id integer name string organization string organization_id integer params string
2.26.6. hammer domain set-parameter
ドメインのパラメーターを作成または更新します。
Usage: hammer domain set-parameter [OPTIONS] Options: --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Numerical ID or domain name --hidden-value HIDDEN_VALUE Should the value be hidden One of true/false, yes/no, 1/0. --name NAME Parameter name --parameter-type PARAMETER_TYPE Type of the parameter Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json' Default: "string" --value VALUE Parameter value -h, --help Print help
2.26.7. hammer domain update
ドメインを更新します。
Usage: hammer domain update [OPTIONS] Options: --description DESC Full name describing the domain --dns DNS_NAME Name of DNS proxy to use within this domain --dns-id DNS_ID ID of DNS proxy to use within this domain --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Domain name --new-name NEW_NAME The full DNS domain name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.27. hammer environment
環境を操作します。
Usage: hammer environment [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create an environment delete, destroy Delete an environment info, show Show an environment list, index List all environments sc-params List all smart class parameters update Update an environment Options: -h, --help Print help
2.27.1. hammer environment create
環境を作成します。
Usage: hammer environment create [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.27.2. hammer environment delete
環境を削除します。
Usage: hammer environment <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Puppet environment name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.27.3. hammer environment info
環境を表示します。
Usage: hammer environment <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Puppet environment name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Puppetclasses/ | x | x | Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | ---------------|-----|---------|-----
2.27.4. hammer environment list
環境を一覧表示します。
Usage: hammer environment <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --puppet-class PUPPET_CLASS_NAME Puppet class name --puppet-class-id PUPPET_CLASS_ID --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: location string location_id integer name string organization string organization_id integer
2.27.5. hammer environment sc-params
スマートクラスパラメーターの一覧を表示します。
Usage: hammer environment sc-params [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --search SEARCH Filter results --show-hidden SHOW_HIDDEN Display hidden values One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: --------------|-----|-------- FIELDS | ALL | DEFAULT --------------|-----|-------- Id | x | x Parameter | x | x Default value | x | x Override | x | x Puppet class | x | x Class id | x | x --------------|-----|-------- Search / Order fields: avoid_duplicates Values: true, false environment string key string merge_default Values: true, false merge_overrides Values: true, false override Values: true, false parameter string puppetclass string puppetclass_name string
2.27.6. hammer environment update
環境を更新します。
Usage: hammer environment update [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Puppet environment name --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.28. hammer erratum
エラータを操作します。
Usage: hammer erratum [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info Show an erratum list, index List errata Options: -h, --help Print help
2.28.1. hammer erratum info
エラータを表示します。
Usage: hammer erratum info [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID An erratum identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier -h, --help Print help Predefined field sets: ------------------------|-----|-------- FIELDS | ALL | DEFAULT ------------------------|-----|-------- Title | x | x Version | x | x Description | x | x Status | x | x Id | x | x Errata id | x | x Reboot suggested | x | x Updated | x | x Issued | x | x Release | x | x Solution | x | x Packages | x | x Module streams/name | x | x Module streams/stream | x | x Module streams/packages | x | x ------------------------|-----|--------
2.28.2. hammer erratum list
エラータを一覧表示します。
Usage: hammer erratum <list|index> [OPTIONS] Options: --available-for AVAILABLE_FOR Return errata that can be added to the specified object. The values 'content_view_version' and 'content_view_filter are supported. --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Content View Filter identifier --content-view-id CONTENT_VIEW_ID Content view numeric identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content View Version identifier --cve CVE CVE identifier --errata-restrict-applicable ERRATA_RESTRICT_APPLICABLE Return errata that are applicable to one or more hosts (defaults to true if host_id is specified) One of true/false, yes/no, 1/0. --errata-restrict-installable ERRATA_RESTRICT_INSTALLABLE Return errata that are upgradable on one or more hosts One of true/false, yes/no, 1/0. --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID Host id to list applicable errata for --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier --search SEARCH Search string -h, --help Print help Predefined field sets: ----------|-----|-------- FIELDS | ALL | DEFAULT ----------|-----|-------- Id | x | x Errata id | x | x Type | x | x Title | x | x Issued | x | x Updated | x | x ----------|-----|-------- Search / Order fields: bug string cve string errata_id string errata_type string id string issued date modular Values: true, false package string package_name string reboot_suggested boolean repository string severity string title string type string updated date
2.29. hammer export-templates
テンプレートを git repo またはサーバー上のディレクトリーにエクスポートします。
Usage: hammer export-templates [OPTIONS] Options: --branch BRANCH Branch in Git repo. --commit-msg COMMIT_MSG Custom commit message for templates export --dirname DIRNAME The directory within Git repo containing the templates --filter FILTER Export templates with names matching this regex (case-insensitive; snippets are not filtered). --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --metadata-export-mode METADATA_EXPORT_MODE Specify how to handle metadata Possible value(s): 'refresh', 'keep', 'remove' --negate NEGATE Negate the prefix (for purging). One of true/false, yes/no, 1/0. --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --repo REPO Override the default repo from settings. --verbose BE_VERBOSE Be verbose One of true/false, yes/no, 1/0. -h, --help Print help
2.30. hammer fact
fact を検索します。
Usage: hammer fact [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: list, index List all fact values Options: -h, --help Print help
2.30.1. hammer fact list
ファクト値の一覧を表示します。
Usage: hammer fact <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|-------- FIELDS | ALL | DEFAULT -------|-----|-------- Host | x | x Fact | x | x Value | x | x -------|-----|-------- Search / Order fields: fact string fact_short_name string facts string host string host.hostgroup string host_id integer location string location_id integer name string organization string organization_id integer origin string reported_at datetime short_name string type string value string
2.31. hammer file
ファイルを操作します。
Usage: hammer file [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show a file list, index List files Options: -h, --help Print help
2.31.1. hammer file info
ファイルを表示します。
Usage: hammer file <info|show> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content View Version ID --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID A file identifier --name NAME File name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository ID -h, --help Print help Predefined field sets: ---------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------|-----|---------|----- Id | x | x | Name | x | x | x Path | x | x | Uuid | x | x | Checksum | x | x | ---------|-----|---------|-----
2.31.2. hammer file list
ファイルを一覧表示します。
Usage: hammer file <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Content view filter identifier --content-view-filter-rule CONTENT_VIEW_FILTER_RULE_NAME Name to search by --content-view-filter-rule-id CONTENT_VIEW_FILTER_RULE_ID Content view filter rule identifier --content-view-id CONTENT_VIEW_ID Content view numeric identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --ids IDS Ids to filter content by Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --include-filter-ids INCLUDE_FILTER_IDS Includes associated content view filter ids in response One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier --search SEARCH Search string -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | Name | x | x | x Path | x | x | -------|-----|---------|-----
2.32. hammer filter
パーミッションフィルターを管理します。
Usage: hammer filter [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: available-permissions List all permissions available-resources List available resource types create Create a filter delete, destroy Delete a filter info, show Show a filter list, index List all filters update Update a filter Options: -h, --help Print help
2.32.1. hammer filter available-permissions
パーミッションの一覧を表示します。
Usage: hammer filter available-permissions [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ---------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------|-----|---------|----- Id | x | x | x Name | x | x | x Resource | x | x | ---------|-----|---------|----- Search / Order fields: name string resource_type string
2.32.2. hammer filter available-resources
利用可能なリソースタイプを一覧表示します。
Usage: hammer filter available-resources [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Name | x | x | x -------|-----|---------|-----
2.32.3. hammer filter create
フィルターを作成します。
Usage: hammer filter create [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --override OVERRIDE One of true/false, yes/no, 1/0. --permission-ids PERMISSION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --permissions PERMISSION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --role ROLE_NAME User role name --role-id ROLE_ID --search SEARCH -h, --help Print help Overriding organizations and locations: Filters inherit organizations and locations from its role by default. This behavior can be changed by setting --override=true. Therefore options --organization[s|-ids] and --location[s|-ids] are applicable only when the override flag is set.
2.32.4. hammer filter delete
フィルターを削除します。
Usage: hammer filter <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.32.5. hammer filter info
フィルターを表示します。
Usage: hammer filter <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Resource type | x | x | Search | x | x | Unlimited? | x | x | Override? | x | x | Role | x | x | Permissions | x | x | Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | ---------------|-----|---------|-----
2.32.6. hammer filter list
すべてのフィルターの一覧を表示します。
Usage: hammer filter <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: --------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------|-----|---------|----- Id | x | x | x Resource type | x | x | Search | x | x | Unlimited? | x | x | Override? | x | x | Role | x | x | Permissions | x | x | --------------|-----|---------|----- Search / Order fields: limited Values: true, false location string location_id integer organization string organization_id integer override Values: true, false permission string resource string role string role_id integer search text unlimited Values: true, false
2.32.7. hammer filter update
フィルターを更新します。
Usage: hammer filter update [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --override OVERRIDE One of true/false, yes/no, 1/0. --permission-ids PERMISSION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --permissions PERMISSION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --role ROLE_NAME User role name --role-id ROLE_ID --search SEARCH -h, --help Print help Overriding organizations and locations: Filters inherit organizations and locations from its role by default. This behavior can be changed by setting --override=true. Therefore options --organization[s|-ids] and --location[s|-ids] are applicable only when the override flag is set.
2.33. hammer foreign-input-set
外部入力セットを管理します。
Usage: hammer foreign-input-set [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a foreign input set delete, destroy Delete a foreign input set info, show Show foreign input set details list, index List foreign input sets update Update a foreign input set Options: -h, --help Print help
2.33.1. hammer foreign-input-set create
外部入力セットを作成します。
Usage: hammer foreign-input-set create [OPTIONS] Options: --description DESCRIPTION Input set description --exclude EXCLUDE A comma separated list of input names to be included from the foreign template. --include INCLUDE A comma separated list of input names to be included from the foreign template. --include-all INCLUDE_ALL Include all inputs from the foreign template One of true/false, yes/no, 1/0. --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --target-template-id TARGET_TEMPLATE_ID Target template ID --template-id TEMPLATE_ID -h, --help Print help
2.33.2. hammer foreign-input-set delete
外部入力セットを削除します。
Usage: hammer foreign-input-set <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --template-id TEMPLATE_ID -h, --help Print help
2.33.3. hammer foreign-input-set info
外部入力セット詳細を表示します。
Usage: hammer foreign-input-set <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --template-id TEMPLATE_ID -h, --help Print help Predefined field sets: ---------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------------|-----|---------|----- Id | x | x | x Name | x | x | x Target template id | x | x | Target template name | x | x | Include all | x | x | Include | x | x | Exclude | x | x | ---------------------|-----|---------|-----
2.33.4. hammer foreign-input-set list
外部入力セットを一覧表示します。
Usage: hammer foreign-input-set <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results --template-id TEMPLATE_ID -h, --help Print help Predefined field sets: ---------------------|-----|-------- FIELDS | ALL | DEFAULT ---------------------|-----|-------- Id | x | x Target template id | x | x Target template name | x | x ---------------------|-----|--------
2.33.5. hammer foreign-input-set update
外部入力セットを更新します。
Usage: hammer foreign-input-set update [OPTIONS] Options: --description DESCRIPTION Input set description --exclude EXCLUDE A comma separated list of input names to be included from the foreign template. --id ID --include INCLUDE A comma separated list of input names to be included from the foreign template. --include-all INCLUDE_ALL Include all inputs from the foreign template One of true/false, yes/no, 1/0. --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --target-template-id TARGET_TEMPLATE_ID Target template ID --template-id TEMPLATE_ID -h, --help Print help
2.34. hammer full-help
全 hammer コマンドの help の表示します。
Usage: hammer full-help [OPTIONS] Options: --md Format output in markdown -h, --help Print help
2.35. hammer global-parameter
グローバルパラメーターを操作します。
Usage: hammer global-parameter [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: delete, destroy Delete a global parameter list, index List all global parameters set Set a global parameter Options: -h, --help Print help
2.35.1. hammer global-parameter delete
グローバルパラメーターを削除します。
Usage: hammer global-parameter <delete|destroy> [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Common parameter name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.35.2. hammer global-parameter list
グローバルパラメーターを一覧表示します。
Usage: hammer global-parameter <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results --show-hidden SHOW_HIDDEN Display hidden values One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Name | x | x | x Value | x | x | Type | x | x | -------|-----|---------|----- Search / Order fields: domain_name string host_group_name string host_name string key_type string location_name string name string organization_name string os_name string parameter_type string subnet_name text type string value text
2.35.3. hammer global-parameter set
グローバルパラメーターを設定します。
Usage: hammer global-parameter set [OPTIONS] Options: --hidden-value HIDDEN_VALUE Should the value be hidden One of true/false, yes/no, 1/0. --name NAME Parameter name --parameter-type PARAMETER_TYPE Type of the parameter Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json' Default: "string" --value VALUE Parameter value -h, --help Print help
2.36. hammer host
ホストを操作します。
Usage: hammer host [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: ansible-roles Manage Ansible roles on a host boot Boot host from specified device config-reports List all reports create Create a host deb-package Manage deb packages on your hosts delete, destroy Delete a host delete-parameter Delete parameter for a host disassociate Disassociate a host enc-dump Dump host's ENC YAML errata Manage errata on your hosts facts List all fact values info, show Show a host interface View and manage host's network interfaces list, index List all hosts package Manage packages on your hosts package-group Manage package-groups on your hosts policies-enc View policies ENC for host puppet-classes List all Puppet classes reboot Reboot a host rebuild-config Rebuild orchestration related configurations for host reports List all reports reset Reset a host sc-params List all smart class parameters set-parameter Create or append a parameter for a host start Power a host on status Get status of host stop Power a host off subscription Manage subscription information on your hosts traces List traces on your hosts update Update a host Options: -h, --help Print help
2.36.1. hammer host ansible-roles
ホストで Ansible ロールを実行します。
Usage: hammer host ansible-roles [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: assign Assigns Ansible roles to a host list, index List all Ansible roles for a host play Runs all Ansible roles on a host Options: -h, --help Print help
2.36.1.1. hammer host ansible-roles assign
Ansible ロールをホストに割り当てます。
Usage: hammer host ansible-roles assign [OPTIONS] Options: --ansible-role-ids ANSIBLE_ROLE_IDS Ansible roles to assign to a host Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ansible-roles ANSIBLE_ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.1.2. hammer host ansible-roles list
ホストの Ansible ロールをすべて一覧表示します。
Usage: hammer host ansible-roles <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Imported at | x | x | ------------|-----|---------|-----
2.36.1.3. hammer host ansible-roles play
ホストに対して全 Ansible ロールを実行します。
Usage: hammer host ansible-roles play [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.2. hammer host boot
指定されたデバイスからホストを起動します。
Usage: hammer host boot [OPTIONS] Options: --device DEVICE Boot device, valid devices are disk, cdrom, pxe, bios --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.3. hammer host config-reports
レポートの一覧を表示します。
Usage: hammer host config-reports [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Host id --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------|-----|---------|----- Id | x | x | x Host | x | x | Last report | x | x | Origin | x | x | Applied | x | x | Restarted | x | x | Failed | x | x | Restart failures | x | x | Skipped | x | x | Pending | x | x | -----------------|-----|---------|----- Search / Order fields: applied integer environment string eventful Values: true, false failed integer failed_restarts integer host string host_id integer hostgroup string hostgroup_fullname string hostgroup_title string last_report datetime location string log text organization string origin string pending integer reported datetime resource text restarted integer skipped integer
2.36.4. hammer host create
ホストを作成します。
Usage: hammer host create [OPTIONS] Options: --ansible-role-ids ANSIBLE_ROLE_IDS IDs of associated ansible roles Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ansible-roles ANSIBLE_ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID Required if host is managed and value is not inherited from host group --ask-root-password ASK_ROOT_PW One of true/false, yes/no, 1/0. --autoheal AUTOHEAL Sets whether the Host will autoheal subscriptions upon checkin One of true/false, yes/no, 1/0. --build BUILD One of true/false, yes/no, 1/0. --comment COMMENT Additional information about this host --compute-attributes COMPUTE_ATTRS Compute resource attributes Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID Nil means host is bare metal --config-group-ids CONFIG_GROUP_IDS IDs of associated config groups Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --config-groups CONFIG_GROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --content-source CONTENT_SOURCE_NAME Content Source name --content-source-id CONTENT_SOURCE_ID --content-view CONTENT_VIEW_NAME Name to search by --content-view-id CONTENT_VIEW_ID --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Required if host is managed and value is not inherited from host group --enabled ENABLED Include this host within Satellite reporting One of true/false, yes/no, 1/0. --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID --hostgroup-title HOSTGROUP_TITLE Hostgroup title --hypervisor-guest-uuids HYPERVISOR_GUEST_UUIDS List of hypervisor guest uuids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --image IMAGE_NAME Name to search by --image-id IMAGE_ID --installed-products-attributes INSTALLED_PRODUCTS_ATTRIBUTES List of products installed on the host Comma separated list of values defined by a schema. See Option details section below. JSON is acceptable and preferred way for complex parameters --interface INTERFACE Interface parameters Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters Can be specified multiple times. --ip IP Not required if using a subnet with DHCP Capsule --kickstart-repository REPOSITORY_NAME Kickstart repository name --kickstart-repository-id KICKSTART_REPOSITORY_ID Repository Id associated with the kickstart repo used for provisioning --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --mac MAC Required for managed host that is bare metal, not required if it's a virtual machine --managed MANAGED True/False flag whether a host is managed or unmanaged. Note: this value also determines whether several parameters are required or not One of true/false, yes/no, 1/0. --medium MEDIUM_NAME Medium name --medium-id MEDIUM_ID Required if not imaged based provisioning and host is managed and value is not inherited from host group --model MODEL_NAME Model name --model-id MODEL_ID --name NAME --openscap-proxy-id OPENSCAP_PROXY_ID ID of OpenSCAP Capsule --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID Required if host is managed and value is not inherited from host group --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --overwrite OVERWRITE One of true/false, yes/no, 1/0. Default: "true" --owner OWNER_LOGIN Login of the owner --owner-id OWNER_ID ID of the owner --owner-type OWNER_TYPE Host's owner type Possible value(s): 'User', 'Usergroup' --parameters PARAMS Replaces with new host parameters Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --partition-table PARTITION_TABLE_NAME Partition table name --partition-table-id PARTITION_TABLE_ID --product PRODUCT_NAME Name to search by --product-id PRODUCT_ID Product id as listed from a host's installed products, this is not the same product id as the products api returns --progress-report-id PROGRESS_REPORT_ID UUID to track orchestration tasks status, GET /api/orchestration/:UUID/tasks --provision-method PROVISION_METHOD The method used to provision the host. Possible value(s): 'build', 'image', 'bootdisk' --puppet-ca-proxy PUPPET_CA_PROXY_NAME --puppet-ca-proxy-id PUPPET_CA_PROXY_ID Puppet CA Capsule ID --puppet-class-ids PUPPET_CLASS_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-classes PUPPET_CLASS_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --puppet-proxy PUPPET_PROXY_NAME --puppet-proxy-id PUPPET_PROXY_ID Puppet Capsule ID --purpose-addons PURPOSE_ADDONS Sets the system add-ons Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --purpose-role PURPOSE_ROLE Sets the system purpose usage --purpose-usage PURPOSE_USAGE Sets the system purpose usage --pxe-loader PXE_LOADER DHCP filename option (Grub2/PXELinux by default) Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'Grub2 UEFI HTTP', 'Grub2 UEFI HTTPS', 'Grub2 UEFI HTTPS SecureBoot', 'iPXE Embedded', 'iPXE UEFI HTTP', 'iPXE Chain BIOS', 'iPXE Chain UEFI' --realm REALM_NAME Name to search by --realm-id REALM_ID --release-version RELEASE_VERSION Release version for this Host to use (7Server, 7.1, etc) --root-password ROOT_PW Required if host is managed and value is not inherited from host group or default password in settings --service-level SERVICE_LEVEL Service level to be used for autoheal --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID Required if host is managed and value is not inherited from host group --typed-parameters TYPED_PARAMS Replaces with new host parameters (with type support) Comma separated list of values defined by a schema. See Option details section below. JSON is acceptable and preferred way for complex parameters --volume VOLUME Volume parameters Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters Can be specified multiple times. -h, --help Print help Option details: Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value): --typed-parameters "name=<string>\,value=<string>\,parameter_type=[string|boolean|integer|real|array|hash|yaml|json]\,hidden_value=[true|false|1|0], ... " --installed-products-attributes "product_id=<string>\,product_name=<string>\,arch=<string>\,version=<string>, ... " Available keys for --interface: mac ip type Possible values: interface, bmc, bond, bridge name subnet_id domain_id identifier managed true/false primary true/false, each managed hosts needs to have one primary interface. provision true/false virtual true/false For virtual=true: tag VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for virtual interfaces. attached_to Identifier of the interface to which this interface belongs, e.g. eth1. For type=bond: mode Possible values: balance-rr, active-backup, balance-xor, broadcast, 802.3ad, balance-tlb, balance-alb attached_devices Identifiers of slave interfaces, e.g. [eth1,eth2] bond_options For type=bmc: provider always IPMI username password Provider specific options: NOTE: Bold attributes are required. EC2: --volume: --interface: --compute-attributes: availability_zone flavor_id groups security_group_ids managed_ip GCE: --volume: size_gb Volume size in GB, integer value --interface: --compute-attributes: machine_type network associate_external_ip Libvirt: --volume: pool_name One of available storage pools capacity String value, e.g. 10G allocation Initial allocation, e.g. 0G format_type Possible values: raw, qcow2 --interface: compute_type Possible values: bridge, network compute_bridge Name of interface according to type compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000 compute_network Libvirt instance network, e.g. default --compute-attributes: cpus Number of CPUs memory String, amount of memory, value in bytes cpu_mode Possible values: default, host-model, host-passthrough start Boolean (expressed as 0 or 1), whether to start the machine or not OpenStack: --volume: --interface: --compute-attributes: availability_zone boot_from_volume flavor_ref image_ref tenant_id security_groups network oVirt: --volume: size_gb Volume size in GB, integer value storage_domain ID or name of storage domain bootable Boolean, set 1 for bootable, only one volume can be bootable preallocate Boolean, set 1 to preallocate wipe_after_delete Boolean, set 1 to wipe disk after delete interface Disk interface name, must be ide, virto or virto_scsi --interface: compute_name Compute name, e.g. eth0 compute_network Select one of available networks for a cluster, must be an ID or a name compute_interface Interface type compute_vnic_profile Vnic Profile --compute-attributes: cluster ID or name of cluster to use template Hardware profile to use cores Integer value, number of cores sockets Integer value, number of sockets memory Amount of memory, integer value in bytes ha Boolean, set 1 to high availability display_type Possible values: VNC, SPICE keyboard_layout Possible values: ar, de-ch, es, fo, fr-ca, hu, ja, mk, no, pt-br, sv, da, en-gb, et, fr, fr-ch, is, lt, nl, pl, ru, th, de, en-us, fi, fr-be, hr, it, lv, nl-be, pt, sl, tr. Not usable if display type is SPICE. start Boolean, set 1 to start the vm Rackspace: --volume: --interface: --compute-attributes: flavor_id VMware: --volume: name storage_pod Storage Pod ID from VMware datastore Datastore ID from VMware mode persistent/independent_persistent/independent_nonpersistent size_gb Integer number, volume size in GB thin true/false eager_zero true/false controller_key Associated SCSI controller key --interface: compute_type Type of the network adapter, for example one of: VirtualVmxnet3 VirtualE1000 See documentation center for your version of vSphere to find more details about available adapter types: https://www.vmware.com/support/pubs/ compute_network Network ID or Network Name from VMware --compute-attributes: cluster Cluster ID from VMware corespersocket Number of cores per socket (applicable to hardware versions < 10 only) cpus CPU count memory_mb Integer number, amount of memory in MB path Path to folder resource_pool Resource Pool ID from VMware firmware automatic/bios/efi guest_id Guest OS ID form VMware hardware_version Hardware version ID from VMware memoryHotAddEnabled Must be a 1 or 0, lets you add memory resources while the machine is on cpuHotAddEnabled Must be a 1 or 0, lets you add CPU resources while the machine is on add_cdrom Must be a 1 or 0, Add a CD-ROM drive to the virtual machine annotation Annotation Notes scsi_controllers List with SCSI controllers definitions type - ID of the controller from VMware key - Key of the controller (e.g. 1000) start Must be a 1 or 0, whether to start the machine or not AzureRM: --volume: disk_size_gb Volume Size in GB (integer value) data_disk_caching Data Disk Caching (None, ReadOnly, ReadWrite) --interface: compute_network Select one of available Azure Subnets, must be an ID compute_public_ip Public IP (None, Static, Dynamic) compute_private_ip Static Private IP (expressed as true or false) --compute-attributes: resource_group Existing Azure Resource Group of user vm_size VM Size, eg. Standard_A0 etc. username The Admin username password The Admin password platform OS type eg. Linux ssh_key_data SSH key for passwordless authentication os_disk_caching OS disk caching premium_os_disk Premium OS Disk, Boolean as 0 or 1 script_command Custom Script Command script_uris Comma seperated file URIs
2.36.5. hammer host deb-package
ホストの deb パッケージを管理します。
Usage: hammer host deb-package [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: list, index List deb packages installed on the host Options: -h, --help Print help
2.36.5.1. hammer host deb-package list
ホストにインストールされている deb パッケージの一覧を表示します。
Usage: hammer host deb-package <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID ID of the host --order ORDER Sort field and order, eg. 'id DESC' --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string -h, --help Print help Predefined field sets: --------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------|-----|---------|----- Id | x | x | x Name | x | x | x Version | x | x | Arch | x | x | --------|-----|---------|-----
2.36.6. hammer host delete
ホストを削除します。
Usage: hammer host <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.7. hammer host delete-parameter
ホストのパラメーターを削除します。
Usage: hammer host delete-parameter [OPTIONS] Options: --host HOST_NAME Host name --host-id HOST_ID --name NAME Parameter name -h, --help Print help
2.36.8. hammer host disassociate
ホストの関連付けを解除します。
Usage: hammer host disassociate [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.9. hammer host enc-dump
ホストの ENC YAML をダンプします。
Usage: hammer host enc-dump [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.10. hammer host errata
お使いのホストに関するエラータを管理します。
Usage: hammer host errata [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: apply Schedule errata for installation using katello-agent. NOTE: Katello-agent is deprecated and will be removed in a future release. Consider using remote execution instead. info Retrieve a single errata for a host list List errata available for the content host recalculate Force regenerate applicability. Options: -h, --help Print help
2.36.10.1. hammer host errata apply
katello-agent を使用してインストール用のエラータをスケジュールします。注意: Katello エージェントは非推奨となり、今後のリリースで削除される予定です。代わりにリモート実行の使用を検討してください。
Usage: hammer host errata apply [OPTIONS] Options: --async Do not wait for the task --errata-ids ERRATA_IDS List of Errata ids to install. Will be removed in a future release Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID Host ID --ids IDS List of errata ids to perform an action on, (ex: RHSA-2019:1168) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --search SEARCH Search string for erratum to perform an action on -h, --help Print help
2.36.10.2. hammer host errata info
ホストに関するエラータを 1 つ取得します。
Usage: hammer host errata info [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID Host ID --id ID Errata id of the erratum (RHSA-2012:108) --name NAME Name to search by -h, --help Print help Predefined field sets: ------------------------|-----|-------- FIELDS | ALL | DEFAULT ------------------------|-----|-------- Title | x | x Version | x | x Description | x | x Status | x | x Id | x | x Errata id | x | x Reboot suggested | x | x Updated | x | x Issued | x | x Release | x | x Solution | x | x Packages | x | x Module streams/name | x | x Module streams/stream | x | x Module streams/packages | x | x ------------------------|-----|--------
2.36.10.3. hammer host errata list
コンテンツホストに利用可能なエラータを一覧表示します。
Usage: hammer host errata list [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Calculate Applicable Errata based on a particular Content View --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID UUID of the content host --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string -h, --help Print help Predefined field sets: ------------|-----|-------- FIELDS | ALL | DEFAULT ------------|-----|-------- Id | x | x Erratum id | x | x Type | x | x Title | x | x Installable | x | x ------------|-----|--------
2.36.10.4. hammer host errata recalculate
適用可能なエラータを強制的に再生成します。
Usage: hammer host errata recalculate [OPTIONS] Options: --async Do not wait for the task --host HOST_NAME Host name --host-id HOST_ID Host ID -h, --help Print help
2.36.11. hammer host facts
ファクト値の一覧を表示します。
Usage: hammer host facts [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|-------- FIELDS | ALL | DEFAULT -------|-----|-------- Fact | x | x Value | x | x -------|-----|-------- Search / Order fields: fact string fact_short_name string facts string host string host.hostgroup string host_id integer location string location_id integer name string organization string organization_id integer origin string reported_at datetime short_name string type string value string
2.36.12. hammer host info
ホストを表示します。
Usage: hammer host <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: --------------------------------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------------------------------------------|-----|---------|----- Id | x | x | x Uuid | x | x | Name | x | x | x Organization | x | x | Location | x | x | Host group | x | x | Compute resource | x | x | Compute profile | x | x | Puppet environment | x | x | Puppet ca proxy | x | x | Puppet master proxy | x | x | Cert name | x | x | Managed | x | x | Installed at | x | x | Last report | x | x | Uptime (seconds) | x | x | Status/global status | x | x | Status/build status | x | x | Network/ipv4 address | x | x | Network/ipv6 address | x | x | Network/mac | x | x | Network/subnet ipv4 | x | x | Network/subnet ipv6 | x | x | Network/domain | x | x | Network/service provider/sp name | x | x | Network/service provider/sp ip | x | x | Network/service provider/sp mac | x | x | Network/service provider/sp subnet | x | x | Network interfaces/id | x | x | Network interfaces/identifier | x | x | Network interfaces/type | x | x | Network interfaces/mac address | x | x | Network interfaces/ipv4 address | x | x | Network interfaces/ipv6 address | x | x | Network interfaces/fqdn | x | x | Operating system/architecture | x | x | Operating system/operating system | x | x | Operating system/build | x | x | Operating system/medium | x | x | Operating system/partition table | x | x | Operating system/pxe loader | x | x | Operating system/custom partition table | x | x | Operating system/image | x | x | Operating system/image file | x | x | Operating system/use image | x | x | Parameters/ | x | x | All parameters/ | x | x | Additional info/owner | x | x | Additional info/owner id | x | x | Additional info/owner type | x | x | Additional info/enabled | x | x | Additional info/model | x | x | Additional info/comment | x | x | Openscap proxy | x | x | Content information/content view/id | x | x | Content information/content view/name | x | x | Content information/lifecycle environment/id | x | x | Content information/lifecycle environment/name | x | x | Content information/content source/id | x | x | Content information/content source/name | x | x | Content information/kickstart repository/id | x | x | Content information/kickstart repository/name | x | x | Content information/applicable packages | x | x | Content information/upgradable packages | x | x | Content information/applicable errata/enhancement | x | x | Content information/applicable errata/bug fix | x | x | Content information/applicable errata/security | x | x | Subscription information/uuid | x | x | Subscription information/last checkin | x | x | Subscription information/release version | x | x | Subscription information/autoheal | x | x | Subscription information/registered to | x | x | Subscription information/registered at | x | x | Subscription information/registered by activation keys/ | x | x | Subscription information/system purpose/service level | x | x | Subscription information/system purpose/purpose usage | x | x | Subscription information/system purpose/purpose role | x | x | Subscription information/system purpose/purpose addons | x | x | Trace status | x | x | Host collections/id | x | x | Host collections/name | x | x | --------------------------------------------------------|-----|---------|-----
2.36.13. hammer host interface
ホストのネットワークインターフェイスを表示および管理します。
Usage: hammer host interface [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create an interface on a host delete, destroy Delete a host's interface info, show Show an interface for host list, index List all interfaces for host update Update a host's interface Options: -h, --help Print help
2.36.13.1. hammer host interface create
ホストにインターフェイスを作成します。
Usage: hammer host interface create [OPTIONS] Options: --attached-devices ATTACHED_DEVICES Identifiers of attached interfaces, e.g. `['eth1', 'eth2']`. For bond interfaces those are the slaves. Only for bond and bridges interfaces. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --attached-to ATTACHED_TO Identifier of the interface to which this interface belongs, e.g. eth1. Only for virtual interfaces. --bond-options BOND_OPTIONS Space separated options, e.g. miimon=100. Only for bond interfaces. --compute-attributes COMPUTE_ATTRS Compute resource specific attributes Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Satellite domain ID of interface. Required for primary interfaces on managed hosts. --execution EXECUTION Should this interface be used for remote execution? One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID ID or name of host --identifier IDENTIFIER Device identifier, e.g. eth0 or eth1.1 --ip IP IPv4 address of interface --ip6 IP6 IPv6 address of interface --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --mac MAC MAC address of interface. Required for managed interfaces on bare metal. --managed MANAGED Should this interface be managed via DHCP and DNS capsule and should it be configured during provisioning? One of true/false, yes/no, 1/0. --mode MODE Bond mode of the interface, e.g. balance-rr. Only for bond interfaces. Possible value(s): 'balance-rr', 'active-backup', 'balance-xor', 'broadcast', '802.3ad', 'balance-tlb', 'balance-alb' --mtu MTU MTU, this attribute has precedence over the subnet MTU. --name NAME Interface's DNS name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --password PASSWORD Only for BMC interfaces. --primary Should this interface be used for constructing the FQDN of the host? Each managed hosts needs to have one primary interface --provider PROVIDER Interface provider, e.g. IPMI. Only for BMC interfaces. Possible value(s): 'IPMI', 'Redfish', 'SSH' --provision Should this interface be used for TFTP of PXELinux (or SSH for image-based hosts)? Each managed hosts needs to have one provision interface --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID Satellite subnet ID of IPv4 interface --subnet6-id SUBNET6_ID Satellite subnet ID of IPv6 interface --tag TAG VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for virtual interfaces. --type TYPE Interface type, e.g. bmc. Default is interface Possible value(s): 'interface', 'bmc', 'bond', 'bridge' --username USERNAME Only for BMC interfaces. --virtual VIRTUAL Alias or VLAN device One of true/false, yes/no, 1/0. -h, --help Print help
2.36.13.2. hammer host interface delete
ホストのインターフェイスを削除します。
Usage: hammer host interface <delete|destroy> [OPTIONS] Options: --host HOST_NAME Host name --host-id HOST_ID ID or name of host --id ID ID of interface --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.13.3. hammer host interface info
ホストのインターフェイスを表示します。
Usage: hammer host interface <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID ID or name of host --id ID ID or name of interface --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ----------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------|-----|---------|----- Id | x | x | x Identifier | x | x | Type | x | x | Mac address | x | x | Ip address | x | x | Dns name | x | x | Subnet | x | x | Domain | x | x | Managed | x | x | Primary | x | x | Provision | x | x | Virtual | x | x | Tag | x | x | Attached to | x | x | Bmc/username | x | x | Bmc/provider | x | x | Bond/mode | x | x | Bond/attached devices | x | x | Bond/bond options | x | x | Execution | x | x | ----------------------|-----|---------|-----
2.36.13.4. hammer host interface list
ホストのインターフェイス一覧を表示します。
Usage: hammer host interface <list|index> [OPTIONS] Options: --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID ID or name of domain --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID ID or name of host --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID ID or name of subnet -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Identifier | x | x | Type | x | x | Mac address | x | x | Ip address | x | x | Dns name | x | x | ------------|-----|---------|-----
2.36.13.5. hammer host interface update
ホストのインターフェイスを更新します。
Usage: hammer host interface update [OPTIONS] Options: --attached-devices ATTACHED_DEVICES Identifiers of attached interfaces, e.g. `['eth1', 'eth2']`. For bond interfaces those are the slaves. Only for bond and bridges interfaces. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --attached-to ATTACHED_TO Identifier of the interface to which this interface belongs, e.g. eth1. Only for virtual interfaces. --bond-options BOND_OPTIONS Space separated options, e.g. miimon=100. Only for bond interfaces. --compute-attributes COMPUTE_ATTRS Compute resource specific attributes Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Satellite domain ID of interface. Required for primary interfaces on managed hosts. --execution EXECUTION Should this interface be used for remote execution? One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID ID or name of host --id ID ID of interface --identifier IDENTIFIER Device identifier, e.g. eth0 or eth1.1 --ip IP IPv4 address of interface --ip6 IP6 IPv6 address of interface --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --mac MAC MAC address of interface. Required for managed interfaces on bare metal. --managed MANAGED Should this interface be managed via DHCP and DNS capsule and should it be configured during provisioning? One of true/false, yes/no, 1/0. --mode MODE Bond mode of the interface, e.g. balance-rr. Only for bond interfaces. Possible value(s): 'balance-rr', 'active-backup', 'balance-xor', 'broadcast', '802.3ad', 'balance-tlb', 'balance-alb' --mtu MTU MTU, this attribute has precedence over the subnet MTU. --name NAME Interface's DNS name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --password PASSWORD Only for BMC interfaces. --primary Should this interface be used for constructing the FQDN of the host? Each managed hosts needs to have one primary interface --provider PROVIDER Interface provider, e.g. IPMI. Only for BMC interfaces. Possible value(s): 'IPMI', 'Redfish', 'SSH' --provision Should this interface be used for TFTP of PXELinux (or SSH for image-based hosts)? Each managed hosts needs to have one provision interface --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID Satellite subnet ID of IPv4 interface --subnet6-id SUBNET6_ID Satellite subnet ID of IPv6 interface --tag TAG VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for virtual interfaces. --type TYPE Interface type, e.g. bmc. Default is interface Possible value(s): 'interface', 'bmc', 'bond', 'bridge' --username USERNAME Only for BMC interfaces. --virtual VIRTUAL Alias or VLAN device One of true/false, yes/no, 1/0. -h, --help Print help
2.36.14. hammer host list
ホストを一覧表示します。
Usage: hammer host <list|index> [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID ID of host group --hostgroup-title HOSTGROUP_TITLE Hostgroup title --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID ID of location --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID ID of organization --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --search SEARCH Filter results --thin THIN Only list ID and name of hosts One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: -----------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------------|-----|---------|----- Id | x | x | x Name | x | x | x Operating system | x | x | Host group | x | x | Ip | x | x | Mac | x | x | Global status | x | x | Organization | x | | Location | x | | Additional information | x | | Content view | x | x | Lifecycle environment | x | x | Security | x | | Bugfix | x | | Enhancement | x | | Trace status | x | x | -----------------------|-----|---------|----- Search / Order fields: activation_key string activation_key_id string addon string addons_status Values: mismatched, matched, not_specified ansible_role string applicable_errata string applicable_errata_issued date applicable_rpms string architecture string autoheal boolean boot_time build Values: true, false class string comment text compute_resource string compute_resource_id integer config_group string content_source string content_view string content_view_id integer created_at datetime cve_id integer domain string domain_id integer environment string errata_status Values: security_needed, errata_needed, updated, unknown execution_status Values: ok, error facts string global_status Values: ok, warning, error has_ip string has_mac string hostgroup string hostgroup_fullname string hostgroup_id integer hostgroup_name string hostgroup_title string hypervisor boolean hypervisor_host string id integer image string insights_recommendations_count integer installable_errata string installed_at datetime ip string job_invocation.id string job_invocation.result Values: cancelled, failed, pending, success last_checkin datetime last_report datetime lifecycle_environment string lifecycle_environment_id integer location string location_id integer mac string managed Values: true, false model string name string organization string organization_id integer origin string os string os_description string os_id integer os_major string os_minor string os_title string owner string owner_id integer owner_type string params string params_name string parent_hostgroup string puppet_ca string puppet_proxy_id integer puppetmaster string purpose_status Values: mismatched, matched, not_specified realm string realm_id integer registered_at datetime registered_through string release_version string reported.boot_time reported.cores reported.disks_total reported.ram reported.sockets reported.virtual role text role_status Values: mismatched, matched, not_specified service_level string sla_status Values: mismatched, matched, not_specified smart_proxy string status.applied integer status.enabled Values: true, false status.failed integer status.failed_restarts integer status.interesting Values: true, false status.pending integer status.restarted integer status.skipped integer subnet string subnet.name text subnet6 string subnet6.name text subscription_id string subscription_name string subscription_status Values: valid, partial, invalid, unknown, disabled, unsubscribed_hypervisor subscription_uuid string trace_status Values: reboot_needed, process_restart_needed, updated upgradable_rpms string usage text usage_status Values: mismatched, matched, not_specified user.firstname string user.lastname string user.login string user.mail string usergroup string usergroup.name string uuid string
2.36.15. hammer host package
お使いのホストのパッケージを管理します。
Usage: hammer host package [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: install Install packages remotely using katello-agent. NOTE: Katello-agent is deprecated and will be removed in a future release. Consider using remote execution instead. list, index List packages installed on the host remove Uninstall packages remotely using katello-agent. NOTE: Katello-agent is deprecated and will be removed in a future release. Consider using remote execution instead. upgrade Update packages remotely using katello-agent. NOTE: Katello-agent is deprecated and will be removed in a future release. Consider using remote execution instead. upgrade-all Update packages remotely using katello-agent. NOTE: Katello-agent is deprecated and will be removed in a future release. Consider using remote execution instead. Options: -h, --help Print help
2.36.15.1. hammer host package install
katello-agent を使用して、リモートでパッケージをインストールします。注意: Katello エージェントは非推奨となり、今後のリリースで削除される予定です。代わりにリモート実行の使用を検討してください。
Usage: hammer host package install [OPTIONS] Options: --async Do not wait for the task --host HOST_NAME Host name --host-id HOST_ID ID of the host --packages PACKAGES List of package names Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.36.15.2. hammer host package list
ホストにインストールされているパッケージの一覧を表示します。
Usage: hammer host package <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID ID of the host --order ORDER Sort field and order, eg. 'id DESC' --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string -h, --help Print help Predefined field sets: -------|-----|-------- FIELDS | ALL | DEFAULT -------|-----|-------- Nvra | x | x -------|-----|-------- Search / Order fields: arch string epoch string name string nvra string nvrea string release string version string
2.36.15.3. hammer host package remove
katello-agent を使用してリモートでパッケージをアンインストールします。注意: Katello エージェントは非推奨となり、今後のリリースで削除される予定です。代わりにリモート実行の使用を検討してください。
Usage: hammer host package remove [OPTIONS] Options: --async Do not wait for the task --host HOST_NAME Host name --host-id HOST_ID ID of the host --packages PACKAGES List of package names Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.36.15.4. hammer host package upgrade
katello-agent を使用してリモートでパッケージを更新します。注意: Katello エージェントは非推奨となり、今後のリリースで削除される予定です。代わりにリモート実行の使用を検討してください。
Usage: hammer host package upgrade [OPTIONS] Options: --async Do not wait for the task --host HOST_NAME Host name --host-id HOST_ID ID of the host --packages PACKAGES List of packages names Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.36.15.5. hammer host package upgrade-all
katello-agent を使用してリモートでパッケージを更新します。注意: Katello エージェントは非推奨となり、今後のリリースで削除される予定です。代わりにリモート実行の使用を検討してください。
Usage: hammer host package upgrade-all [OPTIONS] Options: --async Do not wait for the task --host HOST_NAME Host name --host-id HOST_ID ID of the host -h, --help Print help
2.36.16. hammer host package-group
お使いのホストのパッケージグループを管理します。
Usage: hammer host package-group [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: install Install packages remotely using katello-agent. NOTE: Katello-agent is deprecated and will be removed in a future release. Consider using remote execution instead. remove Uninstall packages remotely using katello-agent. NOTE: Katello-agent is deprecated and will be removed in a future release. Consider using remote execution instead. Options: -h, --help Print help
2.36.16.1. hammer host package-group install
katello-agent を使用して、リモートでパッケージをインストールします。注意: Katello エージェントは非推奨となり、今後のリリースで削除される予定です。代わりにリモート実行の使用を検討してください。
Usage: hammer host package-group install [OPTIONS] Options: --async Do not wait for the task --groups GROUPS List of package group names (Deprecated) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID ID of the host -h, --help Print help
2.36.16.2. hammer host package-group remove
katello-agent を使用してリモートでパッケージをアンインストールします。注意: Katello エージェントは非推奨となり、今後のリリースで削除される予定です。代わりにリモート実行の使用を検討してください。
Usage: hammer host package-group remove [OPTIONS] Options: --async Do not wait for the task --groups GROUPS List of package group names (Deprecated) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID ID of the host -h, --help Print help
2.36.17. hammer host policies-enc
ホストのポリシー ENC を表示します。
Usage: hammer host policies-enc [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID The identifier of the host --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------------------------|-----|-------- FIELDS | ALL | DEFAULT ------------------------|-----|-------- Id | x | x Profile id | x | x Content path | x | x Content download path | x | x Tailoring path | x | x Tailoring download path | x | x Day of month | x | x Hour | x | x Minute | x | x Month | x | x Week | x | x ------------------------|-----|--------
2.36.18. hammer host puppet-classes
Puppet クラスの一覧を表示します。
Usage: hammer host puppet-classes [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID ID of host --location-id LOCATION_ID Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization-id ORGANIZATION_ID Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: config_group string environment string host string hostgroup string key string location string name string organization string
2.36.19. hammer host reboot
ホストを再起動します。
Usage: hammer host reboot [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.20. hammer host rebuild-config
ホスト向けオーケストレーション関連設定を再ビルドします。
Usage: hammer host rebuild-config [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --only ONLY Limit rebuild steps, valid steps are DHCP, DNS, TFTP, Content_Host_Status, Refresh_Content_Host_Status Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.21. hammer host reports
レポートの一覧を表示します。
Usage: hammer host reports [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Host id --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------|-----|---------|----- Id | x | x | x Host | x | x | Last report | x | x | Origin | x | x | Applied | x | x | Restarted | x | x | Failed | x | x | Restart failures | x | x | Skipped | x | x | Pending | x | x | -----------------|-----|---------|----- Search / Order fields: applied integer environment string eventful Values: true, false failed integer failed_restarts integer host string host_id integer hostgroup string hostgroup_fullname string hostgroup_title string last_report datetime location string log text organization string origin string pending integer reported datetime resource text restarted integer skipped integer
2.36.22. hammer host reset
ホストをリセットします。
Usage: hammer host reset [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.23. hammer host sc-params
スマートクラスパラメーターの一覧を表示します。
Usage: hammer host sc-params [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results --show-hidden SHOW_HIDDEN Display hidden values One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: --------------|-----|-------- FIELDS | ALL | DEFAULT --------------|-----|-------- Id | x | x Parameter | x | x Default value | x | x Override | x | x Puppet class | x | x Class id | x | x --------------|-----|-------- Search / Order fields: avoid_duplicates Values: true, false environment string key string merge_default Values: true, false merge_overrides Values: true, false override Values: true, false parameter string puppetclass string puppetclass_name string
2.36.24. hammer host set-parameter
ホストのパラメーターを作成または追加します。
Usage: hammer host set-parameter [OPTIONS] Options: --hidden-value HIDDEN_VALUE Should the value be hidden One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID --name NAME Parameter name --parameter-type PARAMETER_TYPE Type of the parameter Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json' Default: "string" --value VALUE Parameter value -h, --help Print help
2.36.25. hammer host start
ホストのパワーをオンにします。
Usage: hammer host start [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.26. hammer host status
ホストのステータスを取得します。
Usage: hammer host status [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --type TYPE Status type, can be one of Global Configuration Build Possible value(s): 'HostStatus::Global', 'configuration', 'build' -h, --help Print help
2.36.27. hammer host stop
ホストのパワーをオフにします。
Usage: hammer host stop [OPTIONS] Options: --force Force turning off a host --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Host name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.36.28. hammer host subscription
お使いのホストのサブスクリプション情報を管理します。
Usage: hammer host subscription [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: attach Add a subscription to a host auto-attach Trigger an auto-attach of subscriptions content-override Override product content defaults product-content List associated products register Register a host with subscription and information remove unregister Unregister the host as a subscription consumer Options: -h, --help Print help
2.36.28.1. hammer host subscription attach
ホストにサブスクリプションを追加します。
Usage: hammer host subscription attach [OPTIONS] Options: --host HOST_NAME Host name --host-id HOST_ID Id of the host --quantity Quantity Quantity of this subscriptions to add. Defaults to 1 --subscription-id SUBSCRIPTION_ID ID of subscription -h, --help Print help
2.36.28.2. hammer host subscription auto-attach
サブスクリプションの自動割り当てをトリガーします。
Usage: hammer host subscription auto-attach [OPTIONS] Options: --host HOST_NAME Host name --host-id HOST_ID Id of the host -h, --help Print help
2.36.28.3. hammer host subscription content-override
製品コンテンツのデフォルトを上書きします。
Usage: hammer host subscription content-override [OPTIONS] Options: --content-label CONTENT_LABEL Label of the content --host HOST_NAME Host name --host-id HOST_ID Id of the content host --override-name OVERRIDE_NAME Override parameter key or name. To enable or disable a repo select 'enabled'. Default value: enabled Default: "enabled" --remove Remove a content override --value VALUE Override value. Note for repo enablement you can use a boolean value -h, --help Print help
2.36.28.4. hammer host subscription product-content
関連付けられた製品を一覧表示します。
Usage: hammer host subscription product-content [OPTIONS] Options: --content-access-mode-all CONTENT_ACCESS_MODE_ALL Get all content available, not just that provided by subscriptions One of true/false, yes/no, 1/0. --content-access-mode-env CONTENT_ACCESS_MODE_ENV Limit content to just that available in the host's content view version One of true/false, yes/no, 1/0. --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID Id of the host -h, --help Print help Predefined field sets: -----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------|-----|---------|----- Id | x | x | x Name | x | x | x Type | x | x | Url | x | x | Gpg key | x | x | Label | x | x | Default enabled? | x | x | Override | x | x | -----------------|-----|---------|-----
2.36.28.5. hammer host subscription register
サブスクリプションと情報を使用してホストを登録します。
Usage: hammer host subscription register [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content View ID --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --hypervisor-guest-uuids HYPERVISOR_GUEST_UUIDS UUIDs of the virtual guests from the host's hypervisor Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID Lifecycle Environment ID --name NAME Name of the host --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --release-version RELEASE_VERSION Release version of the content host --service-level SERVICE_LEVEL A service level for auto-healing process, e.g. SELF-SUPPORT --uuid UUID UUID to use for registered host, random uuid is generated if not provided -h, --help Print help
2.36.28.6. hammer host subscription remove
Usage: hammer host subscription remove [OPTIONS] Options: --host HOST_NAME Host name --host-id HOST_ID Id of the host --quantity Quantity Remove the first instance of a subscription with matching id and quantity --subscription-id SUBSCRIPTION_ID ID of subscription -h, --help Print help
2.36.28.7. hammer host subscription unregister
ホストからサブスクリプションの登録を解除します。
Usage: hammer host subscription unregister [OPTIONS] Options: --host HOST_NAME Host name --host-id HOST_ID Id of the host -h, --help Print help
2.36.29. hammer host traces
ホストのトレースを一覧表示します。
Usage: hammer host traces [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: list List services that need restarting on the host resolve Resolve Traces Options: -h, --help Print help
2.36.29.1. hammer host traces list
ホストで再起動が必要なサービスを一覧表示します。
Usage: hammer host traces list [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID ID of the host -h, --help Print help Predefined field sets: ------------|-----|-------- FIELDS | ALL | DEFAULT ------------|-----|-------- Trace id | x | x Application | x | x Helper | x | x Type | x | x ------------|-----|--------
2.36.29.2. hammer host traces resolve
トレースの解決
Usage: hammer host traces resolve [OPTIONS] Options: --async Do not wait for the task --host HOST_NAME Host name --host-id HOST_ID ID of the host --trace-ids TRACE_IDS Array of Trace IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.36.30. hammer host update
ホストを更新します。
Usage: hammer host update [OPTIONS] Options: --ansible-role-ids ANSIBLE_ROLE_IDS IDs of associated ansible roles Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ansible-roles ANSIBLE_ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID Required if host is managed and value is not inherited from host group --ask-root-password ASK_ROOT_PW One of true/false, yes/no, 1/0. --autoheal AUTOHEAL Sets whether the Host will autoheal subscriptions upon checkin One of true/false, yes/no, 1/0. --build BUILD One of true/false, yes/no, 1/0. --comment COMMENT Additional information about this host --compute-attributes COMPUTE_ATTRS Compute resource attributes Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID Nil means host is bare metal --config-group-ids CONFIG_GROUP_IDS IDs of associated config groups Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --config-groups CONFIG_GROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --content-source CONTENT_SOURCE_NAME Content Source name --content-source-id CONTENT_SOURCE_ID --content-view CONTENT_VIEW_NAME Name to search by --content-view-id CONTENT_VIEW_ID --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Required if host is managed and value is not inherited from host group --enabled ENABLED Include this host within Satellite reporting One of true/false, yes/no, 1/0. --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID --hostgroup-title HOSTGROUP_TITLE Hostgroup title --hypervisor-guest-uuids HYPERVISOR_GUEST_UUIDS List of hypervisor guest uuids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --image IMAGE_NAME Name to search by --image-id IMAGE_ID --installed-products-attributes INSTALLED_PRODUCTS_ATTRIBUTES List of products installed on the host Comma separated list of values defined by a schema. See Option details section below. JSON is acceptable and preferred way for complex parameters --interface INTERFACE Interface parameters Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters Can be specified multiple times. --ip IP Not required if using a subnet with DHCP Capsule --kickstart-repository REPOSITORY_NAME Kickstart repository name --kickstart-repository-id KICKSTART_REPOSITORY_ID Repository Id associated with the kickstart repo used for provisioning --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --mac MAC Required for managed host that is bare metal, not required if it's a virtual machine --managed MANAGED True/False flag whether a host is managed or unmanaged. Note: this value also determines whether several parameters are required or not One of true/false, yes/no, 1/0. --medium MEDIUM_NAME Medium name --medium-id MEDIUM_ID Required if not imaged based provisioning and host is managed and value is not inherited from host group --model MODEL_NAME Model name --model-id MODEL_ID --name NAME Host name --new-location NEW_LOCATION_NAME Use to update --new-location-id NEW_LOCATION_ID Use to update --new-location-title NEW_LOCATION_TITLE Use to update --new-name NEW_NAME --new-organization NEW_ORGANIZATION_NAME Use to update --new-organization-id NEW_ORGANIZATION_ID Use to update --new-organization-title NEW_ORGANIZATION_TITLE Use to update --openscap-proxy-id OPENSCAP_PROXY_ID ID of OpenSCAP Capsule --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID Required if host is managed and value is not inherited from host group --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --overwrite OVERWRITE One of true/false, yes/no, 1/0. --owner OWNER_LOGIN Login of the owner --owner-id OWNER_ID ID of the owner --owner-type OWNER_TYPE Host's owner type Possible value(s): 'User', 'Usergroup' --parameters PARAMS Replaces with new host parameters Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --partition-table PARTITION_TABLE_NAME Partition table name --partition-table-id PARTITION_TABLE_ID --product PRODUCT_NAME Name to search by --product-id PRODUCT_ID Product id as listed from a host's installed products, this is not the same product id as the products api returns --progress-report-id PROGRESS_REPORT_ID UUID to track orchestration tasks status, GET /api/orchestration/:UUID/tasks --provision-method PROVISION_METHOD The method used to provision the host. Possible value(s): 'build', 'image', 'bootdisk' --puppet-ca-proxy PUPPET_CA_PROXY_NAME --puppet-ca-proxy-id PUPPET_CA_PROXY_ID Puppet CA Capsule ID --puppet-class-ids PUPPET_CLASS_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-classes PUPPET_CLASS_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --puppet-proxy PUPPET_PROXY_NAME --puppet-proxy-id PUPPET_PROXY_ID Puppet Capsule ID --purpose-addons PURPOSE_ADDONS Sets the system add-ons Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --purpose-role PURPOSE_ROLE Sets the system purpose usage --purpose-usage PURPOSE_USAGE Sets the system purpose usage --pxe-loader PXE_LOADER DHCP filename option (Grub2/PXELinux by default) Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'Grub2 UEFI HTTP', 'Grub2 UEFI HTTPS', 'Grub2 UEFI HTTPS SecureBoot', 'iPXE Embedded', 'iPXE UEFI HTTP', 'iPXE Chain BIOS', 'iPXE Chain UEFI' --realm REALM_NAME Name to search by --realm-id REALM_ID --release-version RELEASE_VERSION Release version for this Host to use (7Server, 7.1, etc) --root-password ROOT_PW Required if host is managed and value is not inherited from host group or default password in settings --service-level SERVICE_LEVEL Service level to be used for autoheal --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID Required if host is managed and value is not inherited from host group --typed-parameters TYPED_PARAMS Replaces with new host parameters (with type support) Comma separated list of values defined by a schema. See Option details section below. JSON is acceptable and preferred way for complex parameters --volume VOLUME Volume parameters Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters Can be specified multiple times. -h, --help Print help Option details: Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value): --typed-parameters "name=<string>\,value=<string>\,parameter_type=[string|boolean|integer|real|array|hash|yaml|json]\,hidden_value=[true|false|1|0], ... " --installed-products-attributes "product_id=<string>\,product_name=<string>\,arch=<string>\,version=<string>, ... " Available keys for --interface: mac ip type Possible values: interface, bmc, bond, bridge name subnet_id domain_id identifier managed true/false primary true/false, each managed hosts needs to have one primary interface. provision true/false virtual true/false For virtual=true: tag VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for virtual interfaces. attached_to Identifier of the interface to which this interface belongs, e.g. eth1. For type=bond: mode Possible values: balance-rr, active-backup, balance-xor, broadcast, 802.3ad, balance-tlb, balance-alb attached_devices Identifiers of slave interfaces, e.g. [eth1,eth2] bond_options For type=bmc: provider always IPMI username password Provider specific options: NOTE: Bold attributes are required. EC2: --volume: --interface: --compute-attributes: availability_zone flavor_id groups security_group_ids managed_ip GCE: --volume: size_gb Volume size in GB, integer value --interface: --compute-attributes: machine_type network associate_external_ip Libvirt: --volume: pool_name One of available storage pools capacity String value, e.g. 10G allocation Initial allocation, e.g. 0G format_type Possible values: raw, qcow2 --interface: compute_type Possible values: bridge, network compute_bridge Name of interface according to type compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000 compute_network Libvirt instance network, e.g. default --compute-attributes: cpus Number of CPUs memory String, amount of memory, value in bytes cpu_mode Possible values: default, host-model, host-passthrough start Boolean (expressed as 0 or 1), whether to start the machine or not OpenStack: --volume: --interface: --compute-attributes: availability_zone boot_from_volume flavor_ref image_ref tenant_id security_groups network oVirt: --volume: size_gb Volume size in GB, integer value storage_domain ID or name of storage domain bootable Boolean, set 1 for bootable, only one volume can be bootable preallocate Boolean, set 1 to preallocate wipe_after_delete Boolean, set 1 to wipe disk after delete interface Disk interface name, must be ide, virto or virto_scsi --interface: compute_name Compute name, e.g. eth0 compute_network Select one of available networks for a cluster, must be an ID or a name compute_interface Interface type compute_vnic_profile Vnic Profile --compute-attributes: cluster ID or name of cluster to use template Hardware profile to use cores Integer value, number of cores sockets Integer value, number of sockets memory Amount of memory, integer value in bytes ha Boolean, set 1 to high availability display_type Possible values: VNC, SPICE keyboard_layout Possible values: ar, de-ch, es, fo, fr-ca, hu, ja, mk, no, pt-br, sv, da, en-gb, et, fr, fr-ch, is, lt, nl, pl, ru, th, de, en-us, fi, fr-be, hr, it, lv, nl-be, pt, sl, tr. Not usable if display type is SPICE. start Boolean, set 1 to start the vm Rackspace: --volume: --interface: --compute-attributes: flavor_id VMware: --volume: name storage_pod Storage Pod ID from VMware datastore Datastore ID from VMware mode persistent/independent_persistent/independent_nonpersistent size_gb Integer number, volume size in GB thin true/false eager_zero true/false controller_key Associated SCSI controller key --interface: compute_type Type of the network adapter, for example one of: VirtualVmxnet3 VirtualE1000 See documentation center for your version of vSphere to find more details about available adapter types: https://www.vmware.com/support/pubs/ compute_network Network ID or Network Name from VMware --compute-attributes: cluster Cluster ID from VMware corespersocket Number of cores per socket (applicable to hardware versions < 10 only) cpus CPU count memory_mb Integer number, amount of memory in MB path Path to folder resource_pool Resource Pool ID from VMware firmware automatic/bios/efi guest_id Guest OS ID form VMware hardware_version Hardware version ID from VMware memoryHotAddEnabled Must be a 1 or 0, lets you add memory resources while the machine is on cpuHotAddEnabled Must be a 1 or 0, lets you add CPU resources while the machine is on add_cdrom Must be a 1 or 0, Add a CD-ROM drive to the virtual machine annotation Annotation Notes scsi_controllers List with SCSI controllers definitions type - ID of the controller from VMware key - Key of the controller (e.g. 1000) start Must be a 1 or 0, whether to start the machine or not AzureRM: --volume: disk_size_gb Volume Size in GB (integer value) data_disk_caching Data Disk Caching (None, ReadOnly, ReadWrite) --interface: compute_network Select one of available Azure Subnets, must be an ID compute_public_ip Public IP (None, Static, Dynamic) compute_private_ip Static Private IP (expressed as true or false) --compute-attributes: resource_group Existing Azure Resource Group of user vm_size VM Size, eg. Standard_A0 etc. username The Admin username password The Admin password platform OS type eg. Linux ssh_key_data SSH key for passwordless authentication os_disk_caching OS disk caching premium_os_disk Premium OS Disk, Boolean as 0 or 1 script_command Custom Script Command script_uris Comma seperated file URIs
2.37. hammer host-collection
ホストコレクションを操作します。
Usage: hammer host-collection [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-host Add host to the host collection copy Copy a host collection create Create a host collection delete, destroy Destroy a host collection erratum Manipulate errata for a host collection hosts List all hosts info, show Show a host collection list, index List host collections package Manipulate packages for a host collection package-group Manipulate package-groups for a host collection remove-host Remove hosts from the host collection update Update a host collection Options: -h, --help Print help
2.37.1. hammer host-collection add-host
ホストをホストコレクションに追加します。
Usage: hammer host-collection add-host [OPTIONS] Options: --host-ids HOST_IDS Array of host ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the host collection --name NAME Host collection name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.37.2. hammer host-collection copy
ホストコレクションをコピーします。
Usage: hammer host-collection copy [OPTIONS] Options: --id ID ID of the host collection --name NAME Host collection name to search by --new-name NEW_NAME New host collection name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.37.3. hammer host-collection create
ホストコレクションを作成します。
Usage: hammer host-collection create [OPTIONS] Options: --description DESCRIPTION --host-ids HOST_IDS List of host ids to replace the hosts in host collection Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --max-hosts MAX_HOSTS Maximum number of hosts in the host collection --name NAME Host Collection name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --unlimited-hosts UNLIMITED_HOSTS Whether or not the host collection may have unlimited hosts One of true/false, yes/no, 1/0. -h, --help Print help
2.37.4. hammer host-collection delete
ホストコレクションを破棄します。
Usage: hammer host-collection <delete|destroy> [OPTIONS] Options: --id ID Id of the host collection --name NAME Host collection name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.37.5. hammer host-collection erratum
ホストコレクションのエラータを操作します。
Usage: hammer host-collection erratum [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: install Install errata on content hosts contained within a host collection Options: -h, --help Print help
2.37.5.1. hammer host-collection erratum install
ホストコレクション内に含まれるコンテンツホストにエラータをインストールします。
Usage: hammer host-collection erratum install [OPTIONS] Options: --errata ERRATA List of Errata to install Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id HOST_COLLECTION_ID Host Collection ID --name HOST_COLLECTION_NAME Host Collection Name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.37.6. hammer host-collection hosts
ホストを一覧表示します。
Usage: hammer host-collection hosts [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID ID of host group --hostgroup-title HOSTGROUP_TITLE Hostgroup title --id HOST_COLLECTION_ID Host Collection ID --include INCLUDE Array of extra information types to include Possible value(s): 'parameters', 'all_parameters' --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID ID of location --location-title LOCATION_TITLE Set the current location context for the request --name HOST_COLLECTION_NAME Host Collection Name --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID ID of organization --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results --thin THIN Only list ID and name of hosts One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Security | x | | Bugfix | x | | Enhancement | x | | ------------|-----|---------|----- Search / Order fields: activation_key string activation_key_id string addon string addons_status Values: mismatched, matched, not_specified ansible_role string applicable_errata string applicable_errata_issued date applicable_rpms string architecture string autoheal boolean boot_time build Values: true, false class string comment text compute_resource string compute_resource_id integer config_group string content_source string content_view string content_view_id integer created_at datetime cve_id integer domain string domain_id integer environment string errata_status Values: security_needed, errata_needed, updated, unknown execution_status Values: ok, error facts string global_status Values: ok, warning, error has_ip string has_mac string hostgroup string hostgroup_fullname string hostgroup_id integer hostgroup_name string hostgroup_title string hypervisor boolean hypervisor_host string id integer image string insights_recommendations_count integer installable_errata string installed_at datetime ip string job_invocation.id string job_invocation.result Values: cancelled, failed, pending, success last_checkin datetime last_report datetime lifecycle_environment string lifecycle_environment_id integer location string location_id integer mac string managed Values: true, false model string name string organization string organization_id integer origin string os string os_description string os_id integer os_major string os_minor string os_title string owner string owner_id integer owner_type string params string params_name string parent_hostgroup string puppet_ca string puppet_proxy_id integer puppetmaster string purpose_status Values: mismatched, matched, not_specified realm string realm_id integer registered_at datetime registered_through string release_version string reported.boot_time reported.cores reported.disks_total reported.ram reported.sockets reported.virtual role text role_status Values: mismatched, matched, not_specified service_level string sla_status Values: mismatched, matched, not_specified smart_proxy string status.applied integer status.enabled Values: true, false status.failed integer status.failed_restarts integer status.interesting Values: true, false status.pending integer status.restarted integer status.skipped integer subnet string subnet.name text subnet6 string subnet6.name text subscription_id string subscription_name string subscription_status Values: valid, partial, invalid, unknown, disabled, unsubscribed_hypervisor subscription_uuid string trace_status Values: reboot_needed, process_restart_needed, updated upgradable_rpms string usage text usage_status Values: mismatched, matched, not_specified user.firstname string user.lastname string user.login string user.mail string usergroup string usergroup.name string uuid string
2.37.7. hammer host-collection info
ホストコレクションを表示します。
Usage: hammer host-collection <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the host collection --name NAME Host collection name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Limit | x | x | Description | x | x | Total hosts | x | x | ------------|-----|---------|-----
2.37.8. hammer host-collection list
ホストコレクションの一覧を表示します。
Usage: hammer host-collection <list|index> [OPTIONS] Options: --activation-key ACTIVATION_KEY_NAME Activation key name to search by --activation-key-id ACTIVATION_KEY_ID Activation key identifier --available-for AVAILABLE_FOR Interpret specified object to return only Host Collections that can be associated with specified object. The value 'host' is supported. --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID Filter products by host id --name NAME Host collection name to filter by --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Limit | x | x | Description | x | x | ------------|-----|---------|----- Search / Order fields: host string name string organization_id integer
2.37.9. hammer host-collection package
ホストコレクションのパッケージを操作します。
Usage: hammer host-collection package [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: install Install packages on content hosts contained within a host collection remove Remove packages on content hosts contained within a host collection update Update packages on content hosts contained within a host collection Options: -h, --help Print help
2.37.9.1. hammer host-collection package install
ホストコレクションに含まれるコンテンツホストにパッケージをインストールします。
Usage: hammer host-collection package install [OPTIONS] Options: --id HOST_COLLECTION_ID Host Collection ID --name HOST_COLLECTION_NAME Host Collection Name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --packages PACKAGES Comma-separated list of packages to install Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.37.9.2. hammer host-collection package remove
ホストコレクションに含まれるコンテンツホストでパッケージを削除します。
Usage: hammer host-collection package remove [OPTIONS] Options: --id HOST_COLLECTION_ID Host Collection ID --name HOST_COLLECTION_NAME Host Collection Name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --packages PACKAGES Comma-separated list of packages to install Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.37.9.3. hammer host-collection package update
ホストコレクションに含まれるコンテンツホストでパッケージを更新します。
Usage: hammer host-collection package update [OPTIONS] Options: --id HOST_COLLECTION_ID Host Collection ID --name HOST_COLLECTION_NAME Host Collection Name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --packages PACKAGES Comma-separated list of packages to install Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.37.10. hammer host-collection package-group
ホストコレクションのパッケージグループを操作します。
Usage: hammer host-collection package-group [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: install Install package-groups on content hosts contained within a host collection remove Remove package-groups on content hosts contained within a host collection update Update package-groups on content hosts contained within a host collection Options: -h, --help Print help
2.37.10.1. hammer host-collection package-group install
ホストコレクションに含まれるコンテンツホストにパッケージグループをインストールします。
Usage: hammer host-collection package-group install [OPTIONS] Options: --id HOST_COLLECTION_ID Host Collection ID --name HOST_COLLECTION_NAME Host Collection Name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --package-groups PACKAGE-GROUPS Comma-separated list of package-groups to install Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.37.10.2. hammer host-collection package-group remove
ホストコレクションに含まれるコンテンツホストでパッケージグループを削除します。
Usage: hammer host-collection package-group remove [OPTIONS] Options: --id HOST_COLLECTION_ID Host Collection ID --name HOST_COLLECTION_NAME Host Collection Name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --package-groups PACKAGE-GROUPS Comma-separated list of package-groups to install Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.37.10.3. hammer host-collection package-group update
ホストコレクションに含まれるコンテンツホストでパッケージグループを更新します。
Usage: hammer host-collection package-group update [OPTIONS] Options: --id HOST_COLLECTION_ID Host Collection ID --name HOST_COLLECTION_NAME Host Collection Name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --package-groups PACKAGE-GROUPS Comma-separated list of package-groups to install Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.37.11. hammer host-collection remove-host
ホストコレクションからホストを削除します。
Usage: hammer host-collection remove-host [OPTIONS] Options: --host-ids HOST_IDS Array of host ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the host collection --name NAME Host collection name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.37.12. hammer host-collection update
ホストコレクションを更新します。
Usage: hammer host-collection update [OPTIONS] Options: --description DESCRIPTION --host-ids HOST_IDS List of host ids to replace the hosts in host collection Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the host collection --max-hosts MAX_HOSTS Maximum number of hosts in the host collection --name NAME Host collection name to search by --new-name NEW_NAME Host Collection name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --unlimited-hosts UNLIMITED_HOSTS Whether or not the host collection may have unlimited hosts One of true/false, yes/no, 1/0. -h, --help Print help
2.38. hammer host-registration
ホストの登録
Usage: hammer host-registration [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: generate-command Generate global registration command Options: -h, --help Print help
2.38.1. hammer host-registration generate-command
グローバル登録コマンドを生成します。
Usage: hammer host-registration generate-command [OPTIONS] Options: --activation-key ACTIVATION_KEY Activation key for subscription-manager client, required for CentOS and Red Hat Enterprise Linux. For multiple keys use `activation_keys` param instead. --activation-keys ACTIVATION_KEYS Activation keys for subscription-manager client, required for CentOS and Red Hat Enterprise Linux. Required only if host group has no activation keys. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --force FORCE Clear any previous registration and run subscription-manager with –force. One of true/false, yes/no, 1/0. --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID ID of the Host group to register the host in --hostgroup-title HOSTGROUP_TITLE Hostgroup title --ignore-subman-errors IGNORE_SUBMAN_ERRORS Ignore subscription-manager errors for `subscription-manager register` command One of true/false, yes/no, 1/0. --insecure INSECURE Enable insecure argument for the initial curl One of true/false, yes/no, 1/0. --jwt-expiration JWT_EXPIRATION Expiration of the authorization token (in hours) --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID Lifecycle environment for the host. --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID ID of the Operating System to register the host in --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --packages PACKAGES Packages to install on the host when registered. Can be set by `host_packages` parameter. Example: `pkg1 pkg2` --remote-execution-interface REMOTE_EXECUTION_INTERFACE Identifier of the Host interface for Remote execution --repo REPO Repository URL / details, for example for Debian OS family: 'deb deb.example.com/ buster 1.0', for Red Hat OS family: 'yum.theforeman.org/client/latest/el8/x86_64/' --repo-gpg-key-url REPO_GPG_KEY_URL URL of the GPG key for the repository --setup-insights SETUP_INSIGHTS Set 'host_registration_insights' parameter for the host. If it is set to true, insights client will be installed and registered on Red Hat family operating systems One of true/false, yes/no, 1/0. --setup-remote-execution SETUP_REMOTE_EXECUTION Set 'host_registration_remote_execution' parameter for the host. If it is set to true, SSH keys will be installed on the host One of true/false, yes/no, 1/0. --smart-proxy SMART_PROXY_NAME Name to search by --smart-proxy-id SMART_PROXY_ID ID of the Capsule --update-packages UPDATE_PACKAGES Update all packages on the host One of true/false, yes/no, 1/0. -h, --help Print help
2.39. hammer hostgroup
ホストグループを操作します。
Usage: hammer hostgroup [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: ansible-roles Manage Ansible roles on a hostgroup create Create a host group delete, destroy Delete a host group delete-parameter Delete parameter for a hostgroup info, show Show a host group list, index List all host groups puppet-classes List all Puppet classes rebuild-config Rebuild orchestration config sc-params List all smart class parameters set-parameter Create or update parameter for a hostgroup update Update a host group Options: -h, --help Print help
2.39.1. hammer hostgroup ansible-roles
ホストグループで Ansible ロールを実行します。
Usage: hammer hostgroup ansible-roles [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: assign Assigns Ansible roles to a hostgroup list, index List all Ansible roles for a hostgroup play Runs all Ansible roles on a hostgroup Options: -h, --help Print help
2.39.1.1. hammer hostgroup ansible-roles assign
Ansible ロールをホストグループに割り当てます。
Usage: hammer hostgroup ansible-roles assign [OPTIONS] Options: --ansible-role-ids ANSIBLE_ROLE_IDS Ansible roles to assign to a hostgroup Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ansible-roles ANSIBLE_ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Hostgroup name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --title TITLE Hostgroup title -h, --help Print help
2.39.1.2. hammer hostgroup ansible-roles list
ホストグループの Ansible ロールをすべて一覧表示します。
Usage: hammer hostgroup ansible-roles <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Hostgroup name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --title TITLE Hostgroup title -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Imported at | x | x | ------------|-----|---------|-----
2.39.1.3. hammer hostgroup ansible-roles play
ホストグループに対して全 Ansible ロールを実行します。
Usage: hammer hostgroup ansible-roles play [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Hostgroup name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --title TITLE Hostgroup title -h, --help Print help
2.39.2. hammer hostgroup create
ホストグループを作成します。
Usage: hammer hostgroup create [OPTIONS] Options: --ansible-role-ids ANSIBLE_ROLE_IDS IDs of associated ansible roles Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ansible-roles ANSIBLE_ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID Architecture ID --ask-root-password, --ask-root-pass ASK_ROOT_PW (--ask-root-pass is deprecated: Use --ask-root-password instead) One of true/false, yes/no, 1/0. --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID Compute profile ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID Compute resource ID --config-group-ids CONFIG_GROUP_IDS IDs of associated config groups Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --config-groups CONFIG_GROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --content-source CONTENT_SOURCE_NAME Content Source name --content-source-id CONTENT_SOURCE_ID Content source ID --content-view CONTENT_VIEW_NAME Name to search by --content-view-id CONTENT_VIEW_ID Content view ID --description DESCRIPTION Host group description --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Domain ID --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --group-parameters-attributes GROUP_PARAMETERS_ATTRIBUTES Array of parameters Comma separated list of values defined by a schema. See Option details section below. JSON is acceptable and preferred way for complex parameters --kickstart-repository REPOSITORY_NAME Kickstart repository name --kickstart-repository-id KICKSTART_REPOSITORY_ID Kickstart repository ID --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID Lifecycle environment ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --medium MEDIUM_NAME Medium name --medium-id MEDIUM_ID Media ID --name NAME Name of the host group --openscap-proxy-id OPENSCAP_PROXY_ID ID of OpenSCAP Capsule --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID Operating system ID --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --parent PARENT_NAME Name of parent hostgroup --parent-id PARENT_ID Parent ID of the host group --partition-table PARTITION_TABLE_NAME Partition table name --partition-table-id PARTITION_TABLE_ID --puppet-ca-proxy PUPPET_CA_PROXY_NAME Name of puppet CA proxy --puppet-ca-proxy-id PUPPET_CA_PROXY_ID Puppet CA Capsule ID --puppet-class-ids PUPPETCLASS_IDS List of puppetclass ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-classes PUPPET_CLASS_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --puppet-proxy PUPPET_PROXY_NAME Name of puppet proxy --puppet-proxy-id PUPPET_PROXY_ID Puppet Capsule ID --pxe-loader PXE_LOADER DHCP filename option (Grub2/PXELinux by default) Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'Grub2 UEFI HTTP', 'Grub2 UEFI HTTPS', 'Grub2 UEFI HTTPS SecureBoot', 'iPXE Embedded', 'iPXE UEFI HTTP', 'iPXE Chain BIOS', 'iPXE Chain UEFI' --query-organization ORGANIZATION_NAME Organization name to search by --query-organization-id ORGANIZATION_ID Organization ID to search by --query-organization-label ORGANIZATION_LABEL Organization label to search by --realm REALM_NAME Name to search by --realm-id REALM_ID Realm ID --root-password, --root-pass ROOT_PASSWORD Root password (--root-pass is deprecated: Use --root-password instead) --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID Subnet ID --subnet6 SUBNET6_NAME Subnet IPv6 name --subnet6-id SUBNET6_ID Subnet IPv6 ID -h, --help Print help Option details: Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value): --group-parameters-attributes "name=<string>\,value=<string>\,parameter_type=[string|boolean|integer|real|array|hash|yaml|json]\,hidden_value=[true|false|1|0], ... "
2.39.3. hammer hostgroup delete
ホストグループを削除します。
Usage: hammer hostgroup <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Hostgroup name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --title TITLE Hostgroup title -h, --help Print help
2.39.4. hammer hostgroup delete-parameter
ホストグループのパラメーターを削除します。
Usage: hammer hostgroup delete-parameter [OPTIONS] Options: --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID --hostgroup-title HOSTGROUP_TITLE Hostgroup title --name NAME Parameter name -h, --help Print help
2.39.5. hammer hostgroup info
ホストグループを表示します。
Usage: hammer hostgroup <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Hostgroup name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values One of true/false, yes/no, 1/0. --title TITLE Hostgroup title -h, --help Print help Predefined field sets: ----------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Title | x | x | x Puppet environment | x | x | Model | x | x | Description | x | x | Parent | x | x | Puppet ca proxy | x | x | Puppet master proxy | x | x | Compute profile | x | x | Compute resource | x | x | Network/subnet ipv4 | x | x | Network/subnet ipv6 | x | x | Network/realm | x | x | Network/domain | x | x | Operating system/architecture | x | x | Operating system/operating system | x | x | Operating system/medium | x | x | Operating system/partition table | x | x | Operating system/pxe loader | x | x | Puppetclasses/ | x | x | Parameters/ | x | x | Locations/ | x | x | Organizations/ | x | x | Openscap proxy | x | x | Content view/id | x | x | Content view/name | x | x | Lifecycle environment/id | x | x | Lifecycle environment/name | x | x | Content source/id | x | x | Content source/name | x | x | Kickstart repository/id | x | x | Kickstart repository/name | x | x | ----------------------------------|-----|---------|-----
2.39.6. hammer hostgroup list
すべてのホストグループを一覧表示します。
Usage: hammer hostgroup <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --puppet-class PUPPET_CLASS_NAME Puppet class name --puppet-class-id PUPPET_CLASS_ID --search SEARCH Filter results -h, --help Print help Predefined field sets: -------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------------|-----|---------|----- Id | x | x | x Name | x | x | x Title | x | x | x Operating system | x | x | Puppet environment | x | x | Model | x | x | -------------------|-----|---------|----- Search / Order fields: architecture string class string config_group string environment string host string id integer label string location string location_id integer medium string name string organization string organization_id integer os string os_description string os_id integer os_major string os_minor string os_title string params string template string title string
2.39.7. hammer hostgroup puppet-classes
Puppet クラスの一覧を表示します。
Usage: hammer hostgroup puppet-classes [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID ID of host group --hostgroup-title HOSTGROUP_TITLE Hostgroup title --location-id LOCATION_ID Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization-id ORGANIZATION_ID Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: config_group string environment string host string hostgroup string key string location string name string organization string
2.39.8. hammer hostgroup rebuild-config
オーケストレーション設定を再構築します。
Usage: hammer hostgroup rebuild-config [OPTIONS] Options: --children-hosts CHILDREN_HOSTS Operate on child hostgroup hosts One of true/false, yes/no, 1/0. --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Hostgroup name --only ONLY Limit rebuild steps, valid steps are DHCP, DNS, TFTP, Content_Host_Status, Refresh_Content_Host_Status Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --title TITLE Hostgroup title -h, --help Print help
2.39.9. hammer hostgroup sc-params
スマートクラスパラメーターの一覧を表示します。
Usage: hammer hostgroup sc-params [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID --hostgroup-title HOSTGROUP_TITLE Hostgroup title --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results --show-hidden SHOW_HIDDEN Display hidden values One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: --------------|-----|-------- FIELDS | ALL | DEFAULT --------------|-----|-------- Id | x | x Parameter | x | x Default value | x | x Override | x | x Puppet class | x | x Class id | x | x --------------|-----|-------- Search / Order fields: avoid_duplicates Values: true, false environment string key string merge_default Values: true, false merge_overrides Values: true, false override Values: true, false parameter string puppetclass string puppetclass_name string
2.39.10. hammer hostgroup set-parameter
ホストグループのパラメーターを作成または更新します。
Usage: hammer hostgroup set-parameter [OPTIONS] Options: --hidden-value HIDDEN_VALUE Should the value be hidden One of true/false, yes/no, 1/0. --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID --hostgroup-title HOSTGROUP_TITLE Hostgroup title --name NAME Parameter name --parameter-type PARAMETER_TYPE Type of the parameter Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json' Default: "string" --value VALUE Parameter value -h, --help Print help
2.39.11. hammer hostgroup update
ホストグループを更新します。
Usage: hammer hostgroup update [OPTIONS] Options: --ansible-role-ids ANSIBLE_ROLE_IDS IDs of associated ansible roles Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ansible-roles ANSIBLE_ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID Architecture ID --ask-root-password, --ask-root-pass ASK_ROOT_PW (--ask-root-pass is deprecated: Use --ask-root-password instead) One of true/false, yes/no, 1/0. --compute-profile COMPUTE_PROFILE_NAME Compute profile name --compute-profile-id COMPUTE_PROFILE_ID Compute profile ID --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID Compute resource ID --config-group-ids CONFIG_GROUP_IDS IDs of associated config groups Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --config-groups CONFIG_GROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --content-source CONTENT_SOURCE_NAME Content Source name --content-source-id CONTENT_SOURCE_ID Content source ID --content-view CONTENT_VIEW_NAME Name to search by --content-view-id CONTENT_VIEW_ID Content view ID --description DESCRIPTION Host group description --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Domain ID --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --group-parameters-attributes GROUP_PARAMETERS_ATTRIBUTES Array of parameters Comma separated list of values defined by a schema. See Option details section below. JSON is acceptable and preferred way for complex parameters --id ID --kickstart-repository REPOSITORY_NAME Kickstart repository name --kickstart-repository-id KICKSTART_REPOSITORY_ID Kickstart repository ID --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID Lifecycle environment ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --medium MEDIUM_NAME Medium name --medium-id MEDIUM_ID Media ID --name NAME Hostgroup name --new-name NEW_NAME Name of the host group --openscap-proxy-id OPENSCAP_PROXY_ID ID of OpenSCAP Capsule --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID Operating system ID --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --parent PARENT_NAME Name of parent hostgroup --parent-id PARENT_ID Parent ID of the host group --partition-table PARTITION_TABLE_NAME Partition table name --partition-table-id PARTITION_TABLE_ID --puppet-ca-proxy PUPPET_CA_PROXY_NAME Name of puppet CA proxy --puppet-ca-proxy-id PUPPET_CA_PROXY_ID Puppet CA Capsule ID --puppet-class-ids PUPPETCLASS_IDS List of puppetclass ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-classes PUPPET_CLASS_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --puppet-proxy PUPPET_PROXY_NAME Name of puppet proxy --puppet-proxy-id PUPPET_PROXY_ID Puppet Capsule ID --pxe-loader PXE_LOADER DHCP filename option (Grub2/PXELinux by default) Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'Grub2 UEFI HTTP', 'Grub2 UEFI HTTPS', 'Grub2 UEFI HTTPS SecureBoot', 'iPXE Embedded', 'iPXE UEFI HTTP', 'iPXE Chain BIOS', 'iPXE Chain UEFI' --query-organization ORGANIZATION_NAME Organization name to search by --query-organization-id ORGANIZATION_ID Organization ID to search by --query-organization-label ORGANIZATION_LABEL Organization label to search by --realm REALM_NAME Name to search by --realm-id REALM_ID Realm ID --root-password, --root-pass ROOT_PASSWORD Root password (--root-pass is deprecated: Use --root-password instead) --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID Subnet ID --subnet6 SUBNET6_NAME Subnet IPv6 name --subnet6-id SUBNET6_ID Subnet IPv6 ID --title TITLE Hostgroup title -h, --help Print help Option details: Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value): --group-parameters-attributes "name=<string>\,value=<string>\,parameter_type=[string|boolean|integer|real|array|hash|yaml|json]\,hidden_value=[true|false|1|0], ... "
2.40. hammer http-proxy
HTTP プロキシーを操作します。
Usage: hammer http-proxy [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create an HTTP Proxy delete, destroy Delete an HTTP Proxy info, show Show an HTTP Proxy list, index List of HTTP Proxies update Update an HTTP Proxy Options: -h, --help Print help
2.40.1. hammer http-proxy create
HTTP プロキシーを作成します。
Usage: hammer http-proxy create [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME The HTTP Proxy name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --password PASSWORD Password used to authenticate with the HTTP Proxy --url URL URL of the HTTP Proxy --username USERNAME Username used to authenticate with the HTTP Proxy -h, --help Print help
2.40.2. hammer http-proxy delete
HTTP プロキシーを削除します。
Usage: hammer http-proxy <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.40.3. hammer http-proxy info
HTTP プロキシーを表示します。
Usage: hammer http-proxy <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Identifier of the HTTP Proxy --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Username | x | x | Url | x | x | Locations/ | x | x | Organizations/ | x | x | ---------------|-----|---------|-----
2.40.4. hammer http-proxy list
HTTP プロキシーを一覧表示します。
Usage: hammer http-proxy <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: location string location_id integer name string organization string organization_id integer url string
2.40.5. hammer http-proxy update
HTTP プロキシーを更新します。
Usage: hammer http-proxy update [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Name to search by --new-name NEW_NAME The HTTP Proxy name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --password PASSWORD Password used to authenticate with the HTTP Proxy --url URL URL of the HTTP Proxy --username USERNAME Username used to authenticate with the HTTP Proxy -h, --help Print help
2.41. hammer import-templates
テンプレートを git repo またはサーバー上のディレクトリーからインポートします。
Usage: hammer import-templates [OPTIONS] Options: --associate ASSOCIATE Associate to OS's, Locations & Organizations. Options are: always, new or never. Possible value(s): 'always', 'new', 'never' --branch BRANCH Branch in Git repo. --dirname DIRNAME The directory within Git repo containing the templates --filter FILTER Export templates with names matching this regex (case-insensitive; snippets are not filtered). --force FORCE Update templates that are locked One of true/false, yes/no, 1/0. --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --lock LOCK Lock imported templates Possible value(s): 'lock', 'keep_lock_new', 'keep', 'unlock', 'true', 'false', '0', '1' --negate NEGATE Negate the prefix (for purging). One of true/false, yes/no, 1/0. --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --prefix PREFIX The string all imported templates should begin with. --repo REPO Override the default repo from settings. --verbose VERBOSE Show template diff in response One of true/false, yes/no, 1/0. -h, --help Print help
2.42. hammer job-invocation
ジョブ呼び出しを管理します。
Usage: hammer job-invocation [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: cancel Cancel the job create Create a job invocation info, show Show job invocation list, index List job invocations output View the output for a host rerun Rerun the job Options: -h, --help Print help
2.42.1. hammer job-invocation cancel
ジョブをキャンセルします。
Usage: hammer job-invocation cancel [OPTIONS] Options: --force FORCE One of true/false, yes/no, 1/0. --id ID --location-id LOCATION_ID Set the current location context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request -h, --help Print help
2.42.2. hammer job-invocation create
ジョブ呼び出しを作成します。
Usage: hammer job-invocation create [OPTIONS] Options: --async Do not wait for the task --bookmark BOOKMARK_NAME Name to search by --bookmark-id BOOKMARK_ID --concurrency-level CONCURRENCY_LEVEL Run at most N tasks at a time --cron-line CRONLINE Create a recurring execution Cron line format 'a b c d e', where: a. is minute (range: 0-59) b. is hour (range: 0-23) c. is day of month (range: 1-31) d. is month (range: 1-12) e. is day of week (range: 0-6) --description-format DESCRIPTION_FORMAT Override the description format from the template for this invocation only --dynamic Dynamic search queries are evaluated at run time --effective-user EFFECTIVE_USER What user should be used to run the script (using sudo-like mechanisms). Defaults to a template parameter or global setting. --end-time DATETIME Perform no more executions after this time, used with --cron-line Date and time in YYYY-MM-DD HH:MM:SS or ISO 8601 format --execution-timeout-interval EXECUTION_TIMEOUT_INTERVAL Override the timeout interval from the template for this invocation only --feature FEATURE Remote execution feature label that should be triggered, job template assigned to this feature will be used --input-files INPUT FILES Read input values from files Comma-separated list of key=file, where file is a path to a text file to be read --inputs INPUTS Specify inputs from command line Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --job-template JOB_TEMPLATE_NAME Name to search by --job-template-id JOB_TEMPLATE_ID The job template to use, parameter is required unless feature was specified --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --max-iteration MAX_ITERATION Repeat a maximum of N times --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --randomized-ordering RANDOMIZED_ORDERING Execute the jobs on hosts in randomized order One of true/false, yes/no, 1/0. --search-query SEARCH_QUERY --start-at DATETIME Schedule the execution for a later time Date and time in YYYY-MM-DD HH:MM:SS or ISO 8601 format --start-before DATETIME Execution should be cancelled if it cannot be started before --start-at Date and time in YYYY-MM-DD HH:MM:SS or ISO 8601 format --time-span TIME_SPAN Distribute tasks over N seconds -h, --help Print help
2.42.3. hammer job-invocation info
ジョブ呼び出しを表示します。
Usage: hammer job-invocation <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location-id LOCATION_ID Set the current location context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --show-host-status Show job status for the hosts --show-inputs Show the complete input of the job -h, --help Print help Predefined field sets: --------------------|-----|-------- FIELDS | ALL | DEFAULT --------------------|-----|-------- Id | x | x Description | x | x Status | x | x Success | x | x Failed | x | x Pending | x | x Missing | x | x Total | x | x Start | x | x Randomized ordering | x | x Inputs | x | x Job category | x | x Mode | x | x Cron line | x | x Recurring logic id | x | x Hosts | x | x --------------------|-----|--------
2.42.4. hammer job-invocation list
ジョブ呼び出しの一覧を表示します。
Usage: hammer job-invocation <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: --------------------|-----|-------- FIELDS | ALL | DEFAULT --------------------|-----|-------- Id | x | x Description | x | x Status | x | x Success | x | x Failed | x | x Pending | x | x Total | x | x Start | x | x Randomized ordering | x | x Inputs | x | x --------------------|-----|--------
2.42.5. hammer job-invocation output
ホストの出力を表示します。
Usage: hammer job-invocation output [OPTIONS] Options: --async Do not wait for job to complete, shows current output only --host HOST_NAME Host name --host-id HOST_ID --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.42.6. hammer job-invocation rerun
ジョブを再実行します。
Usage: hammer job-invocation rerun [OPTIONS] Options: --failed-only FAILED_ONLY One of true/false, yes/no, 1/0. --id ID --location-id LOCATION_ID Set the current location context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request -h, --help Print help
2.43. hammer job-template
ジョブテンプレートを管理します。
Usage: hammer job-template [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a job template delete, destroy Delete a job template dump View job template content export Export a template including all metadata import Import a job template from ERB info, show Show job template details list, index List job templates update Update a job template Options: -h, --help Print help
2.43.1. hammer job-template create
ジョブテンプレートを作成します。
Usage: hammer job-template create [OPTIONS] Options: --audit-comment AUDIT_COMMENT --current-user CURRENT_USER Whether the current user login should be used as the effective user One of true/false, yes/no, 1/0. --description DESCRIPTION --description-format DESCRIPTION_FORMAT This template is used to generate the description. Input values can be used using the syntax %{package}. You may also include the job category and template name using %{job_category} and %{template_name}. --file TEMPLATE Path to a file that contains the template --job-category JOB_CATEGORY Job category --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locked LOCKED Whether or not the template is locked for editing One of true/false, yes/no, 1/0. --name NAME Template name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --overridable OVERRIDABLE Whether it should be allowed to override the effective user from the invocation form. One of true/false, yes/no, 1/0. --provider-type PROVIDER_TYPE Provider type Possible value(s): 'SSH', 'Ansible' --snippet SNIPPET One of true/false, yes/no, 1/0. --value VALUE What user should be used to run the script (using sudo-like mechanisms) -h, --help Print help
2.43.2. hammer job-template delete
ジョブテンプレートを削除します。
Usage: hammer job-template <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.43.3. hammer job-template dump
ジョブテンプレートコンテンツを表示します。
Usage: hammer job-template dump [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------ FIELDS ------
2.43.4. hammer job-template export
すべてのメターデータを含むテンプレートをエクスポートします。
Usage: hammer job-template export [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------ FIELDS ------
2.43.5. hammer job-template import
ERB からジョブテンプレートをインポートします。
Usage: hammer job-template import [OPTIONS] Options: --file TEMPLATE Path to a file that contains the template - must include ERB metadata --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --overwrite OVERWRITE Overwrite template if it already exists One of true/false, yes/no, 1/0. -h, --help Print help
2.43.6. hammer job-template info
ジョブテンプレートの詳細を表示します。
Usage: hammer job-template <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Job category | x | x | Provider | x | x | Type | x | x | Description | x | x | Inputs | x | x | Locations/ | x | x | Organizations/ | x | x | ---------------|-----|---------|-----
2.43.7. hammer job-template list
ジョブテンプレートの一覧を表示します。
Usage: hammer job-template <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Job category | x | x | Provider | x | x | Type | x | x | -------------|-----|---------|-----
2.43.8. hammer job-template update
ジョブテンプレートを更新します。
Usage: hammer job-template update [OPTIONS] Options: --audit-comment AUDIT_COMMENT --current-user CURRENT_USER Whether the current user login should be used as the effective user One of true/false, yes/no, 1/0. --description DESCRIPTION --description-format DESCRIPTION_FORMAT This template is used to generate the description. Input values can be used using the syntax %{package}. You may also include the job category and template name using %{job_category} and %{template_name}. --file TEMPLATE Path to a file that contains the template --id ID --job-category JOB_CATEGORY Job category --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locked LOCKED Whether or not the template is locked for editing One of true/false, yes/no, 1/0. --name NAME Name to search by --new-name NEW_NAME Template name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --overridable OVERRIDABLE Whether it should be allowed to override the effective user from the invocation form. One of true/false, yes/no, 1/0. --provider-type PROVIDER_TYPE Provider type Possible value(s): 'SSH', 'Ansible' --snippet SNIPPET One of true/false, yes/no, 1/0. --value VALUE What user should be used to run the script (using sudo-like mechanisms) -h, --help Print help
2.44. hammer lifecycle-environment
サーバーで lifecycle_environments を操作します。
Usage: hammer lifecycle-environment [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create an environment delete, destroy Destroy an environment info, show Show an environment list, index List environments in an organization paths List environment paths update Update an environment Options: -h, --help Print help
2.44.1. hammer lifecycle-environment create
環境を作成します。
Usage: hammer lifecycle-environment create [OPTIONS] Options: --description DESCRIPTION Description of the environment --label LABEL Label of the environment --name NAME Name of the environment --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Name of organization --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --prior PRIOR Name of the prior environment --prior-id PRIOR_ID ID of an environment that is prior to the new environment in the chain. It has to be either the ID of Library or the ID of an environment at the end of a chain. --registry-name-pattern REGISTRY_NAME_PATTERN Pattern for container image names --registry-unauthenticated-pull REGISTRY_UNAUTHENTICATED_PULL Allow unauthenticed pull of container images One of true/false, yes/no, 1/0. -h, --help Print help
2.44.2. hammer lifecycle-environment delete
環境を破棄します。
Usage: hammer lifecycle-environment <delete|destroy> [OPTIONS] Options: --id ID ID of the environment --name NAME Lifecycle environment name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.44.3. hammer lifecycle-environment info
環境を表示します。
Usage: hammer lifecycle-environment <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID ID of the environment --name NAME Lifecycle environment name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID ID of the organization --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: ----------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Label | x | x | Description | x | x | Organization | x | x | Library | x | x | Prior lifecycle environment | x | x | Unauthenticated pull | x | x | Registry name pattern | x | x | ----------------------------|-----|---------|-----
2.44.4. hammer lifecycle-environment list
組織の環境の一覧を表示します。
Usage: hammer lifecycle-environment <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --library LIBRARY Set true if you want to see only library environments Possible value(s): 'true', 'false' --name NAME Filter only environments containing this name --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x Prior | x | x | -------|-----|---------|----- Search / Order fields: id integer name string organization_id integer
2.44.5. hammer lifecycle-environment paths
環境パスの一覧を表示します。
Usage: hammer lifecycle-environment paths [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --permission-type PERMISSION_TYPE The associated permission type. One of (readable | promotable) Default: readable -h, --help Print help Predefined field sets: ---------------|-----|-------- FIELDS | ALL | DEFAULT ---------------|-----|-------- Lifecycle path | x | x ---------------|-----|--------
2.44.6. hammer lifecycle-environment update
環境を更新します。
Usage: hammer lifecycle-environment update [OPTIONS] Options: --async ASYNC Do not wait for the update action to finish. Default: true One of true/false, yes/no, 1/0. --description DESCRIPTION Description of the environment --id ID ID of the environment --name NAME Lifecycle environment name to search by --new-name NEW_NAME New name to be given to the environment --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Name of the organization --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --registry-name-pattern REGISTRY_NAME_PATTERN Pattern for container image names --registry-unauthenticated-pull REGISTRY_UNAUTHENTICATED_PULL Allow unauthenticed pull of container images One of true/false, yes/no, 1/0. -h, --help Print help
2.45. hammer location
ロケーションを操作します。
Usage: hammer location [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-compute-resource Associate a compute resource add-domain Associate a domain add-environment Associate a Puppet environment add-hostgroup Associate a hostgroup add-medium Associate a medium add-organization Associate an organization add-provisioning-template Associate provisioning templates add-smart-proxy Associate a smart proxy add-subnet Associate a subnet add-user Associate an user create Create a location delete, destroy Delete a location delete-parameter Delete parameter for a location info, show Show a location list, index List all locations remove-compute-resource Disassociate a compute resource remove-domain Disassociate a domain remove-environment Disassociate a Puppet environment remove-hostgroup Disassociate a hostgroup remove-medium Disassociate a medium remove-organization Disassociate an organization remove-provisioning-template Disassociate provisioning templates remove-smart-proxy Disassociate a smart proxy remove-subnet Disassociate a subnet remove-user Disassociate an user set-parameter Create or update parameter for a location update Update a location Options: -h, --help Print help
2.45.1. hammer location add-compute-resource
コンピュートリソースを関連付けます。
Usage: hammer location add-compute-resource [OPTIONS] Options: --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --id ID --name NAME Set the current location context for the request --title TITLE Set the current location context for the request -h, --help Print help
2.45.2. hammer location add-domain
ドメインを関連付けます。
Usage: hammer location add-domain [OPTIONS] Options: --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Numerical ID or domain name --id ID --name NAME Set the current location context for the request --title TITLE Set the current location context for the request -h, --help Print help
2.45.3. hammer location add-environment
Puppet 環境を関連付けます。
Usage: hammer location add-environment [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --id ID --name NAME Set the current location context for the request --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --title TITLE Set the current location context for the request -h, --help Print help
2.45.4. hammer location add-hostgroup
ホストグループを関連付けます。
Usage: hammer location add-hostgroup [OPTIONS] Options: --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID --hostgroup-title HOSTGROUP_TITLE Hostgroup title --id ID --name NAME Set the current location context for the request --title TITLE Set the current location context for the request -h, --help Print help
2.45.5. hammer location add-medium
メディアを関連付けます。
Usage: hammer location add-medium [OPTIONS] Options: --id ID --medium MEDIUM_NAME Medium name --medium-id MEDIUM_ID --name NAME Set the current location context for the request --title TITLE Set the current location context for the request -h, --help Print help
2.45.6. hammer location add-organization
組織を関連付けます。
Usage: hammer location add-organization [OPTIONS] Options: --id ID --name NAME Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Organization ID --organization-title ORGANIZATION_TITLE Set the current organization context for the request --title TITLE Set the current location context for the request -h, --help Print help
2.45.7. hammer location add-provisioning-template
プロビジョニングテンプレートを関連付けます。
Usage: hammer location add-provisioning-template [OPTIONS] Options: --id ID --name NAME Set the current location context for the request --provisioning-template PROVISIONING_TEMPLATE_NAME Name to search by --provisioning-template-id PROVISIONING_TEMPLATE_ID --provisioning-template-ids PROVISIONING_TEMPLATE_IDS List of provisioning template ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-template-search PROVISIONING_TEMPLATE_SEARCH Provisioning template name regex to search, all matching templates will be associated --provisioning-templates PROVISIONING_TEMPLATE_NAMES List of provisioning template names Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --title TITLE Set the current location context for the request -h, --help Print help
2.45.8. hammer location add-smart-proxy
スマートプロキシーを関連付けます。
Usage: hammer location add-smart-proxy [OPTIONS] Options: --id ID --name NAME Set the current location context for the request --smart-proxy SMART_PROXY_NAME Name to search by --smart-proxy-id SMART_PROXY_ID --title TITLE Set the current location context for the request -h, --help Print help
2.45.9. hammer location add-subnet
サブネットを関連付けます。
Usage: hammer location add-subnet [OPTIONS] Options: --id ID --name NAME Set the current location context for the request --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID --title TITLE Set the current location context for the request -h, --help Print help
2.45.10. hammer location add-user
ユーザーを関連付けます。
Usage: hammer location add-user [OPTIONS] Options: --id ID --name NAME Set the current location context for the request --title TITLE Set the current location context for the request --user USER_LOGIN User's login to search by --user-id USER_ID -h, --help Print help
2.45.11. hammer location create
ロケーションを作成します。
Usage: hammer location create [OPTIONS] Options: --compute-resource-ids COMPUTE_RESOURCE_IDS Compute resource IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --compute-resources COMPUTE_RESOURCE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --description DESCRIPTION --domain-ids DOMAIN_IDS Domain IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --domains DOMAIN_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --environment-ids ENVIRONMENT_IDS Environment IDs (--environment-ids is deprecated: Use --puppet-environment[s|-ids] instead) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --environments ENVIRONMENT_NAMES (--environments is deprecated: Use --puppet-environment[s|-ids] instead) --hostgroup-ids HOSTGROUP_IDS Host group IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup-titles HOSTGROUP_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroups HOSTGROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ignore-types IGNORE_TYPES List of resources types that will be automatically associated Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --media MEDIUM_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --medium-ids MEDIUM_IDS Medium IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS Associated organization IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --parent-id PARENT_ID Parent ID --partition-table-ids PARTITION_TABLE_IDS Partition template IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --partition-tables PARTITION_TABLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-template-ids PROVISIONING_TEMPLATE_IDS Provisioning template IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-templates PROVISIONING_TEMPLATE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environment-ids PUPPET_ENVIRONMENT_IDS Environment IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environments PUPPET_ENVIRONMENT_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --realm-ids REALM_IDS Realm IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --realms REALM_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --smart-proxies SMART_PROXY_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --smart-proxy-ids SMART_PROXY_IDS Capsule IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --subnet-ids SUBNET_IDS Subnet IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --subnets SUBNET_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --user-ids USER_IDS User IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --users USER_LOGINS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.45.12. hammer location delete
ロケーションを削除します。
Usage: hammer location <delete|destroy> [OPTIONS] Options: --id ID Location numeric id to search by --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Set the current organization context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.45.13. hammer location delete-parameter
ロケーションのパラメーターを削除します。
Usage: hammer location delete-parameter [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID --location-title LOCATION_TITLE Set the current location context for the request --name NAME Parameter name -h, --help Print help
2.45.14. hammer location info
ロケーションを表示します。
Usage: hammer location <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Location numeric id to search by --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Set the current organization context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values One of true/false, yes/no, 1/0. --title TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: --------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------|-----|---------|----- Id | x | x | x Title | x | x | x Name | x | x | x Description | x | x | Parent | x | x | Users/ | x | x | Smart proxies/ | x | x | Subnets/ | x | x | Compute resources/ | x | x | Installation media/ | x | x | Templates/ | x | x | Partition tables/ | x | x | Domains/ | x | x | Realms/ | x | x | Environments/ | x | x | Hostgroups/ | x | x | Parameters/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | --------------------|-----|---------|-----
2.45.15. hammer location list
ロケーションの一覧を表示します。
Usage: hammer location <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Title | x | x | x Name | x | x | x Description | x | x | ------------|-----|---------|----- Search / Order fields: description text id integer location_id integer name string title string
2.45.16. hammer location remove-compute-resource
コンピュートリソースの関連付けを解除します。
Usage: hammer location remove-compute-resource [OPTIONS] Options: --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --id ID --name NAME Set the current location context for the request --title TITLE Set the current location context for the request -h, --help Print help
2.45.17. hammer location remove-domain
ドメインの関連付けを解除します。
Usage: hammer location remove-domain [OPTIONS] Options: --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Numerical ID or domain name --id ID --name NAME Set the current location context for the request --title TITLE Set the current location context for the request -h, --help Print help
2.45.18. hammer location remove-environment
Puppet 環境を関連付けを解除します。
Usage: hammer location remove-environment [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --id ID --name NAME Set the current location context for the request --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --title TITLE Set the current location context for the request -h, --help Print help
2.45.19. hammer location remove-hostgroup
ホストグループの関連付けを解除します。
Usage: hammer location remove-hostgroup [OPTIONS] Options: --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID --hostgroup-title HOSTGROUP_TITLE Hostgroup title --id ID --name NAME Set the current location context for the request --title TITLE Set the current location context for the request -h, --help Print help
2.45.20. hammer location remove-medium
メディアの関連付けを解除します。
Usage: hammer location remove-medium [OPTIONS] Options: --id ID --medium MEDIUM_NAME Medium name --medium-id MEDIUM_ID --name NAME Set the current location context for the request --title TITLE Set the current location context for the request -h, --help Print help
2.45.21. hammer location remove-organization
組織の関連付けを解除します。
Usage: hammer location remove-organization [OPTIONS] Options: --id ID --name NAME Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Organization ID --organization-title ORGANIZATION_TITLE Set the current organization context for the request --title TITLE Set the current location context for the request -h, --help Print help
2.45.22. hammer location remove-provisioning-template
プロビジョニングテンプレートの関連付けを解除します。
Usage: hammer location remove-provisioning-template [OPTIONS] Options: --id ID --name NAME Set the current location context for the request --provisioning-template PROVISIONING_TEMPLATE_NAME Name to search by --provisioning-template-id PROVISIONING_TEMPLATE_ID --provisioning-template-ids PROVISIONING_TEMPLATE_IDS List of provisioning template ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-template-search PROVISIONING_TEMPLATE_SEARCH Provisioning template name regex to search, all matching templates will be disassociated --provisioning-templates PROVISIONING_TEMPLATE_NAMES List of provisioning template names Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --title TITLE Set the current location context for the request -h, --help Print help
2.45.23. hammer location remove-smart-proxy
スマートプロキシーの関連付けを解除します。
Usage: hammer location remove-smart-proxy [OPTIONS] Options: --id ID --name NAME Set the current location context for the request --smart-proxy SMART_PROXY_NAME Name to search by --smart-proxy-id SMART_PROXY_ID --title TITLE Set the current location context for the request -h, --help Print help
2.45.24. hammer location remove-subnet
サブネットの関連付けを解除します。
Usage: hammer location remove-subnet [OPTIONS] Options: --id ID --name NAME Set the current location context for the request --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID --title TITLE Set the current location context for the request -h, --help Print help
2.45.25. hammer location remove-user
ユーザーの関連付けを解除します。
Usage: hammer location remove-user [OPTIONS] Options: --id ID --name NAME Set the current location context for the request --title TITLE Set the current location context for the request --user USER_LOGIN User's login to search by --user-id USER_ID -h, --help Print help
2.45.26. hammer location set-parameter
ロケーションのパラメーターを作成または更新します。
Usage: hammer location set-parameter [OPTIONS] Options: --hidden-value HIDDEN_VALUE Should the value be hidden One of true/false, yes/no, 1/0. --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID --location-title LOCATION_TITLE Set the current location context for the request --name NAME Parameter name --parameter-type PARAMETER_TYPE Type of the parameter Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json' Default: "string" --value VALUE Parameter value -h, --help Print help
2.45.27. hammer location update
ロケーションを更新します。
Usage: hammer location update [OPTIONS] Options: --compute-resource-ids COMPUTE_RESOURCE_IDS Compute resource IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --compute-resources COMPUTE_RESOURCE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --description DESCRIPTION --domain-ids DOMAIN_IDS Domain IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --domains DOMAIN_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --environment-ids ENVIRONMENT_IDS Environment IDs (--environment-ids is deprecated: Use --puppet-environment[s|-ids] instead) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --environments ENVIRONMENT_NAMES (--environments is deprecated: Use --puppet-environment[s|-ids] instead) --hostgroup-ids HOSTGROUP_IDS Host group IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup-titles HOSTGROUP_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroups HOSTGROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Location numeric id to search by --ignore-types IGNORE_TYPES List of resources types that will be automatically associated Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --media MEDIUM_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --medium-ids MEDIUM_IDS Medium IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Set the current location context for the request --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS Associated organization IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --parent-id PARENT_ID Parent ID --partition-table-ids PARTITION_TABLE_IDS Partition template IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --partition-tables PARTITION_TABLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-template-ids PROVISIONING_TEMPLATE_IDS Provisioning template IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-templates PROVISIONING_TEMPLATE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environment-ids PUPPET_ENVIRONMENT_IDS Environment IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environments PUPPET_ENVIRONMENT_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --realm-ids REALM_IDS Realm IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --realms REALM_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --smart-proxies SMART_PROXY_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --smart-proxy-ids SMART_PROXY_IDS Capsule IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --subnet-ids SUBNET_IDS Subnet IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --subnets SUBNET_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --title TITLE Set the current location context for the request --user-ids USER_IDS User IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --users USER_LOGINS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.46. hammer mail-notification
メールの通知を管理します。
Usage: hammer mail-notification [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show an email notification list, index List of email notifications Options: -h, --help Print help
2.46.1. hammer mail-notification info
メールの通知を表示します。
Usage: hammer mail-notification <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Numerical ID or email notification name --name NAME Name to search by -h, --help Print help Predefined field sets: ------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------------|-----|---------|----- Id | x | x | x Name | x | x | x Description | x | x | Subscription type | x | x | ------------------|-----|---------|-----
2.46.2. hammer mail-notification list
メール通知を一覧表示します。
Usage: hammer mail-notification <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --order ORDER Sort field and order, eg. ‘id DESC’ --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: description text name string user string
2.47. hammer medium
インストールメディアを操作します。
Usage: hammer medium [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-operatingsystem Associate an operating system create Create a medium delete, destroy Delete a medium info, show Show a medium list, index List all installation media remove-operatingsystem Disassociate an operating system update Update a medium Options: -h, --help Print help
2.47.1. hammer medium add-operatingsystem
オペレーティングシステムを関連付けます。
Usage: hammer medium add-operatingsystem [OPTIONS] Options: --id ID --name NAME Medium name --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID -h, --help Print help
2.47.2. hammer medium create
メディアを作成します。
Usage: hammer medium create [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Name of media --operatingsystem-ids OPERATINGSYSTEM_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --os-family OS_FAMILY Operating system family, available values: AIX, Altlinux, Archlinux, Coreos, Debian, Freebsd, Gentoo, Junos, NXOS, Rancheros, Redhat, Solaris, Suse, VRP, Windows, Xenserver --path PATH The path to the medium, can be a URL or a valid NFS server (exclusive of the architecture). For example mirror.centos.org/centos/$version/os/$arch where $arch will be substituted for the host's actual OS architecture and $version, $major and $minor will be substituted for the version of the operating system. Solaris and Debian media may also use $release. -h, --help Print help
2.47.3. hammer medium delete
メディアを削除します。
Usage: hammer medium <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Medium name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.47.4. hammer medium info
メディアを表示します。
Usage: hammer medium <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Medium name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------------|-----|---------|----- Id | x | x | x Name | x | x | x Path | x | x | Os family | x | x | Operating systems/ | x | x | Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | -------------------|-----|---------|-----
2.47.5. hammer medium list
インストールメディアの一覧を表示します。
Usage: hammer medium <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID ID of operating system --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x Path | x | x | -------|-----|---------|----- Search / Order fields: family string location string location_id integer name string organization string organization_id integer path string
2.47.6. hammer medium remove-operatingsystem
オペレーティングシステムの関連付けを解除します。
Usage: hammer medium remove-operatingsystem [OPTIONS] Options: --id ID --name NAME Medium name --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID -h, --help Print help
2.47.7. hammer medium update
メディアを更新します。
Usage: hammer medium update [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Medium name --new-name NEW_NAME Name of media --operatingsystem-ids OPERATINGSYSTEM_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --os-family OS_FAMILY Operating system family, available values: AIX, Altlinux, Archlinux, Coreos, Debian, Freebsd, Gentoo, Junos, NXOS, Rancheros, Redhat, Solaris, Suse, VRP, Windows, Xenserver --path PATH The path to the medium, can be a URL or a valid NFS server (exclusive of the architecture). For example mirror.centos.org/centos/$version/os/$arch where $arch will be substituted for the host's actual OS architecture and $version, $major and $minor will be substituted for the version of the operating system. Solaris and Debian media may also use $release. -h, --help Print help
2.48. hammer model
ハードウェアモデルを操作します。
Usage: hammer model [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a hardware model delete, destroy Delete a hardware model info, show Show a hardware model list, index List all hardware models update Update a hardware model Options: -h, --help Print help
2.48.1. hammer model create
ハードウェアモデルを作成します。
Usage: hammer model create [OPTIONS] Options: --hardware-model HARDWARE_MODEL --info INFO --name NAME --vendor-class VENDOR_CLASS -h, --help Print help
2.48.2. hammer model delete
ハードウェアモデルを削除します。
Usage: hammer model <delete|destroy> [OPTIONS] Options: --id ID --name NAME Model name -h, --help Print help
2.48.3. hammer model info
ハードウェアモデルを表示します。
Usage: hammer model <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --name NAME Model name -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Vendor class | x | x | Hw model | x | x | Info | x | x | Created at | x | x | Updated at | x | x | -------------|-----|---------|-----
2.48.4. hammer model list
ハードウェアモデルの一覧を表示します。
Usage: hammer model <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --order ORDER Sort field and order, eg. ‘id DESC’ --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Vendor class | x | x | Hw model | x | x | -------------|-----|---------|----- Search / Order fields: hardware_model string info text name string vendor_class string
2.48.5. hammer model update
ハードウェアモデルを更新します。
Usage: hammer model update [OPTIONS] Options: --hardware-model HARDWARE_MODEL --id ID --info INFO --name NAME Model name --new-name NEW_NAME --vendor-class VENDOR_CLASS -h, --help Print help
2.49. hammer module-stream
モジュールストリームを表示します。
Usage: hammer module-stream [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show a module stream list, index List module streams Options: -h, --help Print help
2.49.1. hammer module-stream info
モジュールストリームを表示します。
Usage: hammer module-stream <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID A module stream identifier --name NAME Module stream name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository ID -h, --help Print help Predefined field sets: -------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------------|-----|---------|----- Id | x | x | Module stream name | x | x | x Stream | x | x | Uuid | x | x | Version | x | x | Architecture | x | x | Context | x | x | Repositories/id | x | x | Repositories/name | x | x | Repositories/label | x | x | Artifacts/id | x | x | Artifacts/name | x | x | Profiles/id | x | x | Profiles/name | x | x | Profiles/rpms/id | x | x | Profiles/rpms/name | x | x | -------------------|-----|---------|-----
2.49.2. hammer module-stream list
モジュールストリームを一覧で表示します。
Usage: hammer module-stream <list|index> [OPTIONS] Options: --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Content view filter identifier --content-view-filter-rule CONTENT_VIEW_FILTER_RULE_NAME Name to search by --content-view-filter-rule-id CONTENT_VIEW_FILTER_RULE_ID Content view filter rule identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --host-ids HOST_IDS List of host id to list available module streams for Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ids IDS Ids to filter content by Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --include-filter-ids INCLUDE_FILTER_IDS Includes associated content view filter ids in response One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name-stream-only NAME_STREAM_ONLY Return name and stream information only) One of true/false, yes/no, 1/0. --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier --search SEARCH Search string -h, --help Print help Predefined field sets: -------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------------|-----|---------|----- Id | x | x | Module stream name | x | x | x Stream | x | x | Uuid | x | x | Version | x | x | Architecture | x | x | Context | x | x | -------------------|-----|---------|-----
2.50. hammer organization
組織を操作します。
Usage: hammer organization [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-compute-resource Associate a compute resource add-domain Associate a domain add-environment Associate a Puppet environment add-hostgroup Associate a hostgroup add-location Associate a location add-medium Associate a medium add-provisioning-template Associate provisioning templates add-smart-proxy Associate a smart proxy add-subnet Associate a subnet add-user Associate an user create Create organization delete, destroy Delete an organization delete-parameter Delete parameter for an organization info, show Show organization list, index List all organizations remove-compute-resource Disassociate a compute resource remove-domain Disassociate a domain remove-environment Disassociate a Puppet environment remove-hostgroup Disassociate a hostgroup remove-location Disassociate a location remove-medium Disassociate a medium remove-provisioning-template Disassociate provisioning templates remove-smart-proxy Disassociate a smart proxy remove-subnet Disassociate a subnet remove-user Disassociate an user set-parameter Create or update parameter for an organization update Update organization Options: -h, --help Print help
2.50.1. hammer organization add-compute-resource
コンピュートリソースを関連付けます。
Usage: hammer organization add-compute-resource [OPTIONS] Options: --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --id ID Organization ID --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.50.2. hammer organization add-domain
ドメインを関連付けます。
Usage: hammer organization add-domain [OPTIONS] Options: --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Numerical ID or domain name --id ID Organization ID --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.50.3. hammer organization add-environment
Puppet 環境を関連付けます。
Usage: hammer organization add-environment [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --id ID Organization ID --name NAME Set the current organization context for the request --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --title TITLE Set the current organization context for the request -h, --help Print help
2.50.4. hammer organization add-hostgroup
ホストグループを関連付けます。
Usage: hammer organization add-hostgroup [OPTIONS] Options: --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID --hostgroup-title HOSTGROUP_TITLE Hostgroup title --id ID Organization ID --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.50.5. hammer organization add-location
ロケーションを関連付けます。
Usage: hammer organization add-location [OPTIONS] Options: --id ID Organization ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID --location-title LOCATION_TITLE Set the current location context for the request --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.50.6. hammer organization add-medium
メディアを関連付けます。
Usage: hammer organization add-medium [OPTIONS] Options: --id ID Organization ID --medium MEDIUM_NAME Medium name --medium-id MEDIUM_ID --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.50.7. hammer organization add-provisioning-template
プロビジョニングテンプレートを関連付けます。
Usage: hammer organization add-provisioning-template [OPTIONS] Options: --id ID Organization ID --name NAME Set the current organization context for the request --provisioning-template PROVISIONING_TEMPLATE_NAME Name to search by --provisioning-template-id PROVISIONING_TEMPLATE_ID --provisioning-template-ids PROVISIONING_TEMPLATE_IDS List of provisioning template ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-template-search PROVISIONING_TEMPLATE_SEARCH Provisioning template name regex to search, all matching templates will be associated --provisioning-templates PROVISIONING_TEMPLATE_NAMES List of provisioning template names Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --title TITLE Set the current organization context for the request -h, --help Print help
2.50.8. hammer organization add-smart-proxy
スマートプロキシーを関連付けます。
Usage: hammer organization add-smart-proxy [OPTIONS] Options: --id ID Organization ID --name NAME Set the current organization context for the request --smart-proxy SMART_PROXY_NAME Name to search by --smart-proxy-id SMART_PROXY_ID --title TITLE Set the current organization context for the request -h, --help Print help
2.50.9. hammer organization add-subnet
サブネットを関連付けます。
Usage: hammer organization add-subnet [OPTIONS] Options: --id ID Organization ID --name NAME Set the current organization context for the request --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID --title TITLE Set the current organization context for the request -h, --help Print help
2.50.10. hammer organization add-user
ユーザーを関連付けます。
Usage: hammer organization add-user [OPTIONS] Options: --id ID Organization ID --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request --user USER_LOGIN User's login to search by --user-id USER_ID -h, --help Print help
2.50.11. hammer organization create
組織を作成します。
Usage: hammer organization create [OPTIONS] Options: --compute-resource-ids COMPUTE_RESOURCE_IDS Compute resource IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --compute-resources COMPUTE_RESOURCE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --description DESCRIPTION --domain-ids DOMAIN_IDS Domain IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --domains DOMAIN_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --environment-ids ENVIRONMENT_IDS Environment IDs (--environment-ids is deprecated: Use --puppet-environment[s|-ids] instead) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --environments ENVIRONMENT_NAMES (--environments is deprecated: Use --puppet-environment[s|-ids] instead) --hostgroup-ids HOSTGROUP_IDS Host group IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup-titles HOSTGROUP_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroups HOSTGROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --label LABEL --lifecycle-environment-ids LIFECYCLE_ENVIRONMENT_IDS Environment IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --lifecycle-environments LIFECYCLE_ENVIRONMENT_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS Associated location IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --media MEDIUM_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --medium-ids MEDIUM_IDS Medium IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Set the current organization context for the request --partition-table-ids PARTITION_TABLE_IDS Partition template IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --partition-tables PARTITION_TABLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-template-ids PROVISIONING_TEMPLATE_IDS Provisioning template IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-templates PROVISIONING_TEMPLATE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ptable-ids PTABLE_IDS Partition template IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ptables PTABLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environment-ids PUPPET_ENVIRONMENT_IDS Environment IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environments PUPPET_ENVIRONMENT_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --realm-ids REALM_IDS Realm IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --realms REALM_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --smart-proxies SMART_PROXY_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --smart-proxy-ids SMART_PROXY_IDS Capsule IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --subnet-ids SUBNET_IDS Subnet IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --subnets SUBNET_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --user-ids USER_IDS User IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --users USER_LOGINS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.50.12. hammer organization delete
組織を削除します。
Usage: hammer organization <delete|destroy> [OPTIONS] Options: --async Do not wait for the task --id ID --label LABEL Organization label to search by --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Set the current organization context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.50.13. hammer organization delete-parameter
組織のパラメーターを削除します。
Usage: hammer organization delete-parameter [OPTIONS] Options: --name NAME Parameter name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Organization ID --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.50.14. hammer organization info
組織を表示します。
Usage: hammer organization <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --label LABEL Organization label to search by --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Set the current organization context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -----------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------------|-----|---------|----- Id | x | x | x Title | x | x | x Name | x | x | x Description | x | x | Parent | x | x | Users/ | x | x | Smart proxies/ | x | x | Subnets/ | x | x | Compute resources/ | x | x | Installation media/ | x | x | Templates/ | x | x | Partition tables/ | x | x | Domains/ | x | x | Realms/ | x | x | Environments/ | x | x | Hostgroups/ | x | x | Parameters/ | x | x | Locations/ | x | x | Created at | x | x | Updated at | x | x | Label | x | x | x Description | x | x | Red hat repository url | x | x | Simple content access | x | x | Service levels | x | x | -----------------------|-----|---------|-----
2.50.15. hammer organization list
組織の一覧を表示します。
Usage: hammer organization <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string --sort-by SORT_BY Field to sort the results on --sort-order SORT_ORDER How to order the sorted results (e.g. ASC for ascending) -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Title | x | x | x Name | x | x | x Description | x | x | Label | x | x | x ------------|-----|---------|----- Search / Order fields: description text id integer label string name string organization_id integer title string
2.50.16. hammer organization remove-compute-resource
コンピュートリソースの関連付けを解除します。
Usage: hammer organization remove-compute-resource [OPTIONS] Options: --compute-resource COMPUTE_RESOURCE_NAME Compute resource name --compute-resource-id COMPUTE_RESOURCE_ID --id ID Organization ID --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.50.17. hammer organization remove-domain
ドメインの関連付けを解除します。
Usage: hammer organization remove-domain [OPTIONS] Options: --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID Numerical ID or domain name --id ID Organization ID --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.50.18. hammer organization remove-environment
Puppet 環境を関連付けを解除します。
Usage: hammer organization remove-environment [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --id ID Organization ID --name NAME Set the current organization context for the request --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --title TITLE Set the current organization context for the request -h, --help Print help
2.50.19. hammer organization remove-hostgroup
ホストグループの関連付けを解除します。
Usage: hammer organization remove-hostgroup [OPTIONS] Options: --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID --hostgroup-title HOSTGROUP_TITLE Hostgroup title --id ID Organization ID --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.50.20. hammer organization remove-location
ロケーションの関連付けを解除します。
Usage: hammer organization remove-location [OPTIONS] Options: --id ID Organization ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID --location-title LOCATION_TITLE Set the current location context for the request --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.50.21. hammer organization remove-medium
メディアの関連付けを解除します。
Usage: hammer organization remove-medium [OPTIONS] Options: --id ID Organization ID --medium MEDIUM_NAME Medium name --medium-id MEDIUM_ID --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request -h, --help Print help
2.50.22. hammer organization remove-provisioning-template
プロビジョニングテンプレートの関連付けを解除します。
Usage: hammer organization remove-provisioning-template [OPTIONS] Options: --id ID Organization ID --name NAME Set the current organization context for the request --provisioning-template PROVISIONING_TEMPLATE_NAME Name to search by --provisioning-template-id PROVISIONING_TEMPLATE_ID --provisioning-template-ids PROVISIONING_TEMPLATE_IDS List of provisioning template ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-template-search PROVISIONING_TEMPLATE_SEARCH Provisioning template name regex to search, all matching templates will be disassociated --provisioning-templates PROVISIONING_TEMPLATE_NAMES List of provisioning template names Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --title TITLE Set the current organization context for the request -h, --help Print help
2.50.23. hammer organization remove-smart-proxy
スマートプロキシーの関連付けを解除します。
Usage: hammer organization remove-smart-proxy [OPTIONS] Options: --id ID Organization ID --name NAME Set the current organization context for the request --smart-proxy SMART_PROXY_NAME Name to search by --smart-proxy-id SMART_PROXY_ID --title TITLE Set the current organization context for the request -h, --help Print help
2.50.24. hammer organization remove-subnet
サブネットの関連付けを解除します。
Usage: hammer organization remove-subnet [OPTIONS] Options: --id ID Organization ID --name NAME Set the current organization context for the request --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID --title TITLE Set the current organization context for the request -h, --help Print help
2.50.25. hammer organization remove-user
ユーザーの関連付けを解除します。
Usage: hammer organization remove-user [OPTIONS] Options: --id ID Organization ID --name NAME Set the current organization context for the request --title TITLE Set the current organization context for the request --user USER_LOGIN User's login to search by --user-id USER_ID -h, --help Print help
2.50.26. hammer organization set-parameter
組織のパラメーターを作成または更新します。
Usage: hammer organization set-parameter [OPTIONS] Options: --hidden-value HIDDEN_VALUE Should the value be hidden One of true/false, yes/no, 1/0. --name NAME Parameter name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Organization ID --organization-title ORGANIZATION_TITLE Set the current organization context for the request --parameter-type PARAMETER_TYPE Type of the parameter Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json' Default: "string" --value VALUE Parameter value -h, --help Print help
2.50.27. hammer organization update
組織を更新します。
Usage: hammer organization update [OPTIONS] Options: --compute-resource-ids COMPUTE_RESOURCE_IDS Compute resource IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --compute-resources COMPUTE_RESOURCE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --description DESCRIPTION --domain-ids DOMAIN_IDS Domain IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --domains DOMAIN_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --environment-ids ENVIRONMENT_IDS Environment IDs (--environment-ids is deprecated: Use --puppet-environment[s|-ids] instead) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --environments ENVIRONMENT_NAMES (--environments is deprecated: Use --puppet-environment[s|-ids] instead) --hostgroup-ids HOSTGROUP_IDS Host group IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup-titles HOSTGROUP_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroups HOSTGROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --label LABEL --lifecycle-environment-ids LIFECYCLE_ENVIRONMENT_IDS Environment IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --lifecycle-environments LIFECYCLE_ENVIRONMENT_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS Associated location IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --media MEDIUM_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --medium-ids MEDIUM_IDS Medium IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Set the current organization context for the request --new-name NEW_NAME --new-title NEW_TITLE --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Set the current organization context for the request --partition-table-ids PARTITION_TABLE_IDS Partition template IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --partition-tables PARTITION_TABLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-template-ids PROVISIONING_TEMPLATE_IDS Provisioning template IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-templates PROVISIONING_TEMPLATE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ptable-ids PTABLE_IDS Partition template IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ptables PTABLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environment-ids PUPPET_ENVIRONMENT_IDS Environment IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --puppet-environments PUPPET_ENVIRONMENT_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --realm-ids REALM_IDS Realm IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --realms REALM_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --redhat-repository-url REDHAT_REPOSITORY_URL Red Hat CDN URL --smart-proxies SMART_PROXY_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --smart-proxy-ids SMART_PROXY_IDS Capsule IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --subnet-ids SUBNET_IDS Subnet IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --subnets SUBNET_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --title TITLE Set the current organization context for the request --user-ids USER_IDS User IDs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --users USER_LOGINS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.51. hammer os
オペレーティングシステムを操作します。
Usage: hammer os [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-architecture Associate an architecture add-provisioning-template Associate provisioning templates add-ptable Associate a partition table create Create an operating system delete, destroy Delete an operating system delete-default-template delete-parameter Delete parameter for an operating system info, show Show an operating system list, index List all operating systems remove-architecture Disassociate an architecture remove-provisioning-template Disassociate provisioning templates remove-ptable Disassociate a partition table set-default-template set-parameter Create or update parameter for an operating system update Update an operating system Options: -h, --help Print help
2.51.1. hammer os add-architecture
アーキテクチャーを関連付けます。
Usage: hammer os add-architecture [OPTIONS] Options: --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID --id ID --title TITLE Operating system title -h, --help Print help
2.51.2. hammer os add-provisioning-template
プロビジョニングテンプレートを関連付けます。
Usage: hammer os add-provisioning-template [OPTIONS] Options: --id ID --provisioning-template PROVISIONING_TEMPLATE_NAME Name to search by --provisioning-template-id PROVISIONING_TEMPLATE_ID --provisioning-template-ids PROVISIONING_TEMPLATE_IDS List of provisioning template ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-template-search PROVISIONING_TEMPLATE_SEARCH Provisioning template name regex to search, all matching templates will be associated --provisioning-templates PROVISIONING_TEMPLATE_NAMES List of provisioning template names Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --title TITLE Operating system title -h, --help Print help
2.51.3. hammer os add-ptable
パーティションテーブルを関連付けます。
Usage: hammer os add-ptable [OPTIONS] Options: --id ID --partition-table PARTITION_TABLE_NAME Partition table name --partition-table-id PARTITION_TABLE_ID --title TITLE Operating system title -h, --help Print help
2.51.4. hammer os create
オペレーティングシステムを作成します。
Usage: hammer os create [OPTIONS] Options: --architecture-ids ARCHITECTURE_IDS IDs of associated architectures Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --architectures ARCHITECTURE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --description DESCRIPTION --family FAMILY --major MAJOR --media MEDIUM_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --medium-ids MEDIUM_IDS IDs of associated media Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --minor MINOR --name NAME --os-parameters-attributes OS_PARAMETERS_ATTRIBUTES Array of parameters Comma separated list of values defined by a schema. See Option details section below. JSON is acceptable and preferred way for complex parameters --partition-table-ids PARTITION_TABLE_IDS IDs of associated partition tables Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --partition-tables PARTITION_TABLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --password-hash PASSWORD_HASH Root password hash function to use Possible value(s): 'SHA256', 'SHA512', 'Base64', 'Base64-Windows', 'MD5' --provisioning-template-ids PROVISIONING_TEMPLATE_IDS IDs of associated provisioning templates Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-templates PROVISIONING_TEMPLATE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --release-name RELEASE_NAME -h, --help Print help Option details: Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value): --os-parameters-attributes "name=<string>\,value=<string>, ... "
2.51.5. hammer os delete
オペレーティングシステムを削除します。
Usage: hammer os <delete|destroy> [OPTIONS] Options: --id ID --title TITLE Operating system title -h, --help Print help
2.51.6. hammer os delete-default-template
Usage: hammer os delete-default-template [OPTIONS] Options: --id OS ID Operatingsystem id --type TPL TYPE Type of the provisioning template -h, --help Print help
2.51.7. hammer os delete-parameter
オペレーティングシステムのパラメーターを削除します。
Usage: hammer os delete-parameter [OPTIONS] Options: --name NAME Parameter name --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID -h, --help Print help
2.51.8. hammer os info
オペレーティングシステムを表示します。
Usage: hammer os <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values One of true/false, yes/no, 1/0. --title TITLE Operating system title -h, --help Print help Predefined field sets: --------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------|-----|---------|----- Id | x | x | x Title | x | x | x Release name | x | x | Family | x | x | Name | x | x | Major version | x | x | Minor version | x | x | Partition tables/ | x | x | Default templates/ | x | x | Architectures/ | x | x | Installation media/ | x | x | Templates/ | x | x | Parameters/ | x | x | --------------------|-----|---------|-----
2.51.9. hammer os list
すべてのオペレーティングシステムの一覧を表示します。
Usage: hammer os <list|index> [OPTIONS] Options: --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID ID of architecture --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --medium MEDIUM_NAME Medium name --medium-id MEDIUM_ID ID of medium --order ORDER Sort field and order, eg. ‘id DESC’ --os-parameters-attributes OS_PARAMETERS_ATTRIBUTES Array of parameters Comma separated list of values defined by a schema. See Option details section below. JSON is acceptable and preferred way for complex parameters --page PAGE Page number, starting at 1 --partition-table PARTITION_TABLE_NAME Partition table name --partition-table-id PARTITION_TABLE_ID --per-page PER_PAGE Number of results per page to return, 'all' to return all results --provisioning-template PROVISIONING_TEMPLATE_NAME Name to search by --provisioning-template-id PROVISIONING_TEMPLATE_ID ID of template --search SEARCH Filter results -h, --help Print help Option details: Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value): --os-parameters-attributes "name=<string>\,value=<string>, ... " Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Title | x | x | x Release name | x | x | Family | x | x | -------------|-----|---------|----- Search / Order fields: architecture string description string family string major string medium string minor string name string params string template string title string
2.51.10. hammer os remove-architecture
アーキテクチャーの関連付けを解除します。
Usage: hammer os remove-architecture [OPTIONS] Options: --architecture ARCHITECTURE_NAME Architecture name --architecture-id ARCHITECTURE_ID --id ID --title TITLE Operating system title -h, --help Print help
2.51.11. hammer os remove-provisioning-template
プロビジョニングテンプレートの関連付けを解除します。
Usage: hammer os remove-provisioning-template [OPTIONS] Options: --id ID --provisioning-template PROVISIONING_TEMPLATE_NAME Name to search by --provisioning-template-id PROVISIONING_TEMPLATE_ID --provisioning-template-ids PROVISIONING_TEMPLATE_IDS List of provisioning template ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-template-search PROVISIONING_TEMPLATE_SEARCH Provisioning template name regex to search, all matching templates will be disassociated --provisioning-templates PROVISIONING_TEMPLATE_NAMES List of provisioning template names Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --title TITLE Operating system title -h, --help Print help
2.51.12. hammer os remove-ptable
パーティションテーブルの関連付けを解除します。
Usage: hammer os remove-ptable [OPTIONS] Options: --id ID --partition-table PARTITION_TABLE_NAME Partition table name --partition-table-id PARTITION_TABLE_ID --title TITLE Operating system title -h, --help Print help
2.51.13. hammer os set-default-template
Usage: hammer os set-default-template [OPTIONS] Options: --id OS ID Operatingsystem id --provisioning-template-id TPL ID Provisioning template id to be set -h, --help Print help
2.51.14. hammer os set-parameter
オペレーティングシステムのパラメーターを作成または更新します。
Usage: hammer os set-parameter [OPTIONS] Options: --hidden-value HIDDEN_VALUE Should the value be hidden One of true/false, yes/no, 1/0. --name NAME Parameter name --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID --parameter-type PARAMETER_TYPE Type of the parameter Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json' Default: "string" --value VALUE Parameter value -h, --help Print help
2.51.15. hammer os update
オペレーティングシステムを更新します。
Usage: hammer os update [OPTIONS] Options: --architecture-ids ARCHITECTURE_IDS IDs of associated architectures Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --architectures ARCHITECTURE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --description DESCRIPTION --family FAMILY --id ID --major MAJOR --media MEDIUM_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --medium-ids MEDIUM_IDS IDs of associated media Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --minor MINOR --name NAME --os-parameters-attributes OS_PARAMETERS_ATTRIBUTES Array of parameters Comma separated list of values defined by a schema. See Option details section below. JSON is acceptable and preferred way for complex parameters --partition-table-ids PARTITION_TABLE_IDS IDs of associated partition tables Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --partition-tables PARTITION_TABLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --password-hash PASSWORD_HASH Root password hash function to use Possible value(s): 'SHA256', 'SHA512', 'Base64', 'Base64-Windows', 'MD5' --provisioning-template-ids PROVISIONING_TEMPLATE_IDS IDs of associated provisioning templates Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --provisioning-templates PROVISIONING_TEMPLATE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --release-name RELEASE_NAME --title TITLE Operating system title -h, --help Print help Option details: Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value): --os-parameters-attributes "name=<string>\,value=<string>, ... "
2.52. hammer ostree-branch
OSTree ブランチを操作します。
Usage: hammer ostree-branch [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show an ostree branch list, index List ostree_branches Options: -h, --help Print help
2.52.1. hammer ostree-branch info
ostree ブランチを表示します。
Usage: hammer ostree-branch <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID An ostree branch identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier -h, --help Print help Predefined field sets: --------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------|-----|---------|----- Id | x | x | x Name | x | x | x Version | x | x | Commit | x | x | --------|-----|---------|-----
2.52.2. hammer ostree-branch list
ostree ブランチの一覧を表示します。
Usage: hammer ostree-branch <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Content view filter identifier --content-view-filter-rule CONTENT_VIEW_FILTER_RULE_NAME Name to search by --content-view-filter-rule-id CONTENT_VIEW_FILTER_RULE_ID Content view filter rule identifier --content-view-id CONTENT_VIEW_ID Content view numeric identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --ids IDS Ids to filter content by Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --include-filter-ids INCLUDE_FILTER_IDS Includes associated content view filter ids in response One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier --search SEARCH Search string -h, --help Print help Predefined field sets: --------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------|-----|---------|----- Id | x | x | x Name | x | x | x Version | x | x | --------|-----|---------|-----
2.53. hammer package
パッケージを操作します。
Usage: hammer package [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show a package list, index List packages Options: -h, --help Print help
2.53.1. hammer package info
パッケージを表示します。
Usage: hammer package <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID A package identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier -h, --help Print help Predefined field sets: ----------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------|-----|---------|----- Id | x | x | x Pulp id | x | x | Uuid | x | x | Name | x | x | x Version | x | x | Architecture | x | x | Epoch | x | x | Release | x | x | Author | x | x | Filename | x | x | Source rpm | x | x | Nvrea | x | x | Build host | x | x | Available host count | x | x | Applicable host count | x | x | Children | x | x | Vendor | x | x | License | x | x | Relative path | x | x | Description | x | x | Summary | x | x | Url | x | x | Build time | x | x | Group | x | x | Requires | x | x | Provides | x | x | Files | x | x | Size | x | x | Modular | x | x | ----------------------|-----|---------|-----
2.53.2. hammer package list
パッケージの一覧を表示します。
Usage: hammer package <list|index> [OPTIONS] Options: --available-for AVAILABLE_FOR Return packages that can be added to the specified object. Only the value 'content_view_version' is supported. --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Content View Filter identifier --content-view-id CONTENT_VIEW_ID Content view numeric identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content View Version identifier --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID Host id to list applicable packages for --ids IDS Package identifiers to filter content by Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --packages-restrict-applicable PACKAGES_RESTRICT_APPLICABLE Return packages that are applicable to one or more hosts (defaults to true if host_id is specified) One of true/false, yes/no, 1/0. --packages-restrict-latest PACKAGES_RESTRICT_LATEST Return only the latest version of each package One of true/false, yes/no, 1/0. --packages-restrict-upgradable PACKAGES_RESTRICT_UPGRADABLE Return packages that are upgradable on one or more hosts One of true/false, yes/no, 1/0. --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier --search SEARCH Search string -h, --help Print help Predefined field sets: -----------|-----|-------- FIELDS | ALL | DEFAULT -----------|-----|-------- Id | x | x Filename | x | x Source rpm | x | x -----------|-----|--------
2.54. hammer package-group
パッケージグループを操作します。
Usage: hammer package-group [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show a package group list, index List package_groups Options: -h, --help Print help
2.54.1. hammer package-group info
パッケージグループを表示します。
Usage: hammer package-group <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID A package group identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier -h, --help Print help Predefined field sets: ---------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------------|-----|---------|----- Id | x | x | x Package group name | x | x | x Repository name | x | x | Uuid | x | x | Description | x | x | Default packages | x | x | Mandatory packages | x | x | Conditional packages | x | x | Optional packages | x | x | ---------------------|-----|---------|-----
2.54.2. hammer package-group list
パッケージグループの一覧を表示します。
Usage: hammer package-group <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by --content-view-filter-id CONTENT_VIEW_FILTER_ID Content view filter identifier --content-view-filter-rule CONTENT_VIEW_FILTER_RULE_NAME Name to search by --content-view-filter-rule-id CONTENT_VIEW_FILTER_RULE_ID Content view filter rule identifier --content-view-id CONTENT_VIEW_ID Content view numeric identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --ids IDS Ids to filter content by Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --include-filter-ids INCLUDE_FILTER_IDS Includes associated content view filter ids in response One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier --search SEARCH Search string -h, --help Print help Predefined field sets: -------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------------|-----|---------|----- Id | x | x | x Package group name | x | x | x Repository name | x | x | Uuid | x | x | -------------------|-----|---------|-----
2.55. hammer partition-table
パーティションテーブルを操作します。
Usage: hammer partition-table [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-operatingsystem Associate an operating system create Create a partition table delete, destroy Delete a partition table dump View partition table content info, show Show a partition table list, index List all partition tables remove-operatingsystem Disassociate an operating system update Update a partition table Options: -h, --help Print help
2.55.1. hammer partition-table add-operatingsystem
オペレーティングシステムを関連付けます。
Usage: hammer partition-table add-operatingsystem [OPTIONS] Options: --id ID --name NAME Partition table name --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID -h, --help Print help
2.55.2. hammer partition-table create
パーティションテーブルを作成します。
Usage: hammer partition-table create [OPTIONS] Options: --audit-comment AUDIT_COMMENT --description DESCRIPTION --file LAYOUT Path to a file that contains the partition layout --host-ids HOST_IDS Array of host IDs to associate with the partition table Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup-ids HOSTGROUP_IDS Array of host group IDs to associate with the partition table Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup-titles HOSTGROUP_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroups HOSTGROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locked LOCKED Whether or not the template is locked for editing One of true/false, yes/no, 1/0. --name NAME --operatingsystem-ids OPERATINGSYSTEM_IDS Array of operating system IDs to associate with the partition table Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --os-family OS_FAMILY --snippet SNIPPET One of true/false, yes/no, 1/0. -h, --help Print help
2.55.3. hammer partition-table delete
パーティションテーブルを解除します。
Usage: hammer partition-table <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Partition table name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.55.4. hammer partition-table dump
パーティションテーブルのコンテンツを表示します。
Usage: hammer partition-table dump [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Partition table name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------ FIELDS ------
2.55.5. hammer partition-table info
パーティションテーブルを表示します。
Usage: hammer partition-table <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Partition table name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------------|-----|---------|----- Id | x | x | x Name | x | x | x Os family | x | x | Description | x | x | Locked | x | x | Operating systems/ | x | x | Created at | x | x | Updated at | x | x | Locations/ | x | x | Organizations/ | x | x | -------------------|-----|---------|-----
2.55.6. hammer partition-table list
パーティションテーブルの一覧を表示します。
Usage: hammer partition-table <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID ID of operating system --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ----------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------|-----|---------|----- Id | x | x | x Name | x | x | x Os family | x | x | ----------|-----|---------|----- Search / Order fields: default Values: true, false family string layout text location string location_id integer locked Values: true, false name string organization string organization_id integer snippet Values: true, false template text vendor string
2.55.7. hammer partition-table remove-operatingsystem
オペレーティングシステムの関連付けを解除します。
Usage: hammer partition-table remove-operatingsystem [OPTIONS] Options: --id ID --name NAME Partition table name --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID -h, --help Print help
2.55.8. hammer partition-table update
パーティションテーブルを更新します。
Usage: hammer partition-table update [OPTIONS] Options: --audit-comment AUDIT_COMMENT --description DESCRIPTION --file LAYOUT Path to a file that contains the partition layout --host-ids HOST_IDS Array of host IDs to associate with the partition table Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup-ids HOSTGROUP_IDS Array of host group IDs to associate with the partition table Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup-titles HOSTGROUP_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroups HOSTGROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locked LOCKED Whether or not the template is locked for editing One of true/false, yes/no, 1/0. --name NAME Partition table name --new-name NEW_NAME --operatingsystem-ids OPERATINGSYSTEM_IDS Array of operating system IDs to associate with the partition table Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --os-family OS_FAMILY --snippet SNIPPET One of true/false, yes/no, 1/0. -h, --help Print help
2.56. hammer ping
サーバーやそのサブコンポーネントのステータスを取得します。
Usage: hammer ping [OPTIONS] [SUBCOMMAND] [ARG] ... Parameters: [ARG] ... Subcommand arguments [SUBCOMMAND] Subcommand (default: "foreman") Subcommands: foreman Shows status of Satellite system and it's subcomponents katello Shows status of Katello system and it's subcomponents Options: -h, --help Print help
2.56.1. hammer ping foreman
Satellite システムとそのサブコンポーネントのステータスを表示します。
Usage: hammer ping foreman [OPTIONS] Options: -h, --help Print help
2.56.2. hammer ping katello
Katello システムとそのサブコンポーネントのステータスを表示します。
Usage: hammer ping katello [OPTIONS] Options: -h, --help Print help
2.57. hammer policy
ポリシーを操作します。
Usage: hammer policy [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a Policy delete, destroy Delete a Policy hosts List all hosts info, show Show a Policy list, index List Policies update Update a Policy Options: -h, --help Print help
2.57.1. hammer policy create
ポリシーを作成します。
Usage: hammer policy create [OPTIONS] Options: --cron-line CRON_LINE Policy schedule cron line (only if period == “custom”) --day-of-month DAY_OF_MONTH Policy schedule day of month (only if period == “monthly”) --deploy-by DEPLOY_BY How the policy should be deployed Possible value(s): 'puppet', 'ansible', 'manual' --description DESCRIPTION Policy description --host-ids HOST_IDS Apply policy to hosts Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup-ids HOSTGROUP_IDS Apply policy to host groups Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroups HOSTGROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Policy name --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --period PERIOD Policy schedule period (weekly, monthly, custom) --scap-content SCAP_CONTENT_TITLE SCAP content title --scap-content-id SCAP_CONTENT_ID Policy SCAP content ID --scap-content-profile SCAP_CONTENT_PROFILE_NAME Name to search by --scap-content-profile-id SCAP_CONTENT_PROFILE_ID Policy SCAP content profile ID --tailoring-file TAILORING_FILE_NAME Tailoring file name --tailoring-file-id TAILORING_FILE_ID Tailoring file ID --tailoring-file-profile-id TAILORING_FILE_PROFILE_ID Tailoring file profile ID --weekday WEEKDAY Policy schedule weekday (only if period == “weekly”) -h, --help Print help
2.57.2. hammer policy delete
ポリシーを削除します。
Usage: hammer policy <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.57.3. hammer policy hosts
ホストを一覧表示します。
Usage: hammer policy hosts [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID ID of host group --hostgroup-title HOSTGROUP_TITLE Hostgroup title --id ID Policy Id --include INCLUDE Array of extra information types to include Possible value(s): 'parameters', 'all_parameters' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID ID of location --location-title LOCATION_TITLE Set the current location context for the request --name NAME Policy name --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID ID of organization --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --search SEARCH Filter results --thin THIN Only list ID and name of hosts One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: -----------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------------|-----|---------|----- Id | x | x | x Name | x | x | x Operating system | x | x | Host group | x | x | Ip | x | x | Mac | x | x | Global status | x | x | Organization | x | | Location | x | | Additional information | x | | Content view | x | x | Lifecycle environment | x | x | Security | x | | Bugfix | x | | Enhancement | x | | Trace status | x | x | -----------------------|-----|---------|----- Search / Order fields: activation_key string activation_key_id string addon string addons_status Values: mismatched, matched, not_specified ansible_role string applicable_errata string applicable_errata_issued date applicable_rpms string architecture string autoheal boolean boot_time build Values: true, false class string comment text compute_resource string compute_resource_id integer config_group string content_source string content_view string content_view_id integer created_at datetime cve_id integer domain string domain_id integer environment string errata_status Values: security_needed, errata_needed, updated, unknown execution_status Values: ok, error facts string global_status Values: ok, warning, error has_ip string has_mac string hostgroup string hostgroup_fullname string hostgroup_id integer hostgroup_name string hostgroup_title string hypervisor boolean hypervisor_host string id integer image string insights_recommendations_count integer installable_errata string installed_at datetime ip string job_invocation.id string job_invocation.result Values: cancelled, failed, pending, success last_checkin datetime last_report datetime lifecycle_environment string lifecycle_environment_id integer location string location_id integer mac string managed Values: true, false model string name string organization string organization_id integer origin string os string os_description string os_id integer os_major string os_minor string os_title string owner string owner_id integer owner_type string params string params_name string parent_hostgroup string puppet_ca string puppet_proxy_id integer puppetmaster string purpose_status Values: mismatched, matched, not_specified realm string realm_id integer registered_at datetime registered_through string release_version string reported.boot_time reported.cores reported.disks_total reported.ram reported.sockets reported.virtual role text role_status Values: mismatched, matched, not_specified service_level string sla_status Values: mismatched, matched, not_specified smart_proxy string status.applied integer status.enabled Values: true, false status.failed integer status.failed_restarts integer status.interesting Values: true, false status.pending integer status.restarted integer status.skipped integer subnet string subnet.name text subnet6 string subnet6.name text subscription_id string subscription_name string subscription_status Values: valid, partial, invalid, unknown, disabled, unsubscribed_hypervisor subscription_uuid string trace_status Values: reboot_needed, process_restart_needed, updated upgradable_rpms string usage text usage_status Values: mismatched, matched, not_specified user.firstname string user.lastname string user.login string user.mail string usergroup string usergroup.name string uuid string
2.57.4. hammer policy info
ポリシーを表示します。
Usage: hammer policy <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: --------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Created at | x | x | Period | x | x | Weekday | x | x | Day of month | x | x | Cron line | x | x | Scap content id | x | x | Scap content profile id | x | x | Tailoring file id | x | x | Tailoring file profile id | x | x | Deployment option | x | x | Locations/ | x | x | Organizations/ | x | x | Hostgroups/ | x | x | --------------------------|-----|---------|-----
2.57.5. hammer policy list
ポリシーの一覧を表示します。
Usage: hammer policy <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -----------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------|-----|---------|----- Id | x | x | x Name | x | x | x Created at | x | x | -----------|-----|---------|----- Search / Order fields: content string location string location_id integer name string organization string organization_id integer profile string tailoring_file string tailoring_file_profile string
2.57.6. hammer policy update
ポリシーを更新します。
Usage: hammer policy update [OPTIONS] Options: --cron-line CRON_LINE Policy schedule cron line (only if period == “custom”) --day-of-month DAY_OF_MONTH Policy schedule day of month (only if period == “monthly”) --deploy-by DEPLOY_BY How the policy should be deployed Possible value(s): 'puppet', 'ansible', 'manual' --description DESCRIPTION Policy description --host-ids HOST_IDS Apply policy to hosts Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup-ids HOSTGROUP_IDS Apply policy to host groups Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroups HOSTGROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Policy name --new-name NEW_NAME Policy name --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --period PERIOD Policy schedule period (weekly, monthly, custom) --scap-content SCAP_CONTENT_TITLE SCAP content title --scap-content-id SCAP_CONTENT_ID Policy SCAP content ID --scap-content-profile SCAP_CONTENT_PROFILE_NAME Name to search by --scap-content-profile-id SCAP_CONTENT_PROFILE_ID Policy SCAP content profile ID --tailoring-file TAILORING_FILE_NAME Tailoring file name --tailoring-file-id TAILORING_FILE_ID Tailoring file ID --tailoring-file-profile-id TAILORING_FILE_PROFILE_ID Tailoring file profile ID --weekday WEEKDAY Policy schedule weekday (only if period == “weekly”) -h, --help Print help
2.58. hammer prebuild-bash-completion
Bash 補完向けのオプションやサブコマンドのマップを作成します。
Usage: hammer prebuild-bash-completion [OPTIONS] Options: -h, --help Print help
2.59. hammer product
製品を操作します。
Usage: hammer product [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a product delete, destroy Destroy a product info, show Show a product list, index List products remove-sync-plan Delete assignment sync plan and product set-sync-plan Assign sync plan to product synchronize Sync all repositories for a product update Updates a product update-proxy Updates an HTTP Proxy for a product Options: -h, --help Print help
2.59.1. hammer product create
製品を作成します。
Usage: hammer product create [OPTIONS] Options: --description DESCRIPTION Product description --gpg-key-id GPG_KEY_ID Identifier of the GPG key --label LABEL --name NAME Product name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID ID of the organization --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --ssl-ca-cert-id SSL_CA_CERT_ID Idenifier of the SSL CA Cert --ssl-client-cert-id SSL_CLIENT_CERT_ID Identifier of the SSL Client Cert --ssl-client-key-id SSL_CLIENT_KEY_ID Identifier of the SSL Client Key --sync-plan SYNC_PLAN_NAME Sync plan name to search by --sync-plan-id SYNC_PLAN_ID Plan numeric identifier -h, --help Print help
2.59.2. hammer product delete
製品を破棄します。
Usage: hammer product <delete|destroy> [OPTIONS] Options: --id ID Product numeric identifier --name NAME Product name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.59.3. hammer product info
製品を表示します。
Usage: hammer product <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Product numeric identifier --name NAME Product name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: ---------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------------|-----|---------|----- Id | x | x | x Name | x | x | x Label | x | x | Description | x | x | Sync state (all) | x | x | Sync state (last) | x | x | Sync plan id | x | x | Gpg/gpg key id | x | x | Gpg/gpg key | x | x | Organization | x | x | Readonly | x | x | Deletable | x | x | Content/repo name | x | x | Content/url | x | x | Content/content type | x | x | ---------------------|-----|---------|-----
2.59.4. hammer product list
製品の一覧を表示します。
Usage: hammer product <list|index> [OPTIONS] Options: --available-for AVAILABLE_FOR Interpret specified object to return only Products that can be associated with specified object. Only 'sync_plan' is supported. --custom CUSTOM Return custom products only One of true/false, yes/no, 1/0. --enabled ENABLED Return enabled products only One of true/false, yes/no, 1/0. --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --include-available-content INCLUDE_AVAILABLE_CONTENT Whether to include available content attribute in results One of true/false, yes/no, 1/0. --name NAME Filter products by name --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Filter products by organization --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --redhat-only REDHAT_ONLY Return Red Hat (non-custom) products only One of true/false, yes/no, 1/0. --search SEARCH Search string --subscription SUBSCRIPTION_NAME Subscription name to search by --subscription-id SUBSCRIPTION_ID Filter products by subscription --sync-plan SYNC_PLAN_NAME Sync plan name to search by --sync-plan-id SYNC_PLAN_ID Filter products by sync plan id -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Description | x | x | Organization | x | x | Repositories | x | x | Sync state | x | x | -------------|-----|---------|----- Search / Order fields: description text label string name string organization_id integer redhat Values: true, false
2.59.5. hammer product remove-sync-plan
割り当て同期プランおよび製品を削除します。
Usage: hammer product remove-sync-plan [OPTIONS] Options: --description DESCRIPTION Product description --gpg-key-id GPG_KEY_ID Identifier of the GPG key --id ID Product numeric identifier --name NAME Product name to search by --new-name NEW_NAME Product name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --ssl-ca-cert-id SSL_CA_CERT_ID Idenifier of the SSL CA Cert --ssl-client-cert-id SSL_CLIENT_CERT_ID Identifier of the SSL Client Cert --ssl-client-key-id SSL_CLIENT_KEY_ID Identifier of the SSL Client Key -h, --help Print help
2.59.6. hammer product set-sync-plan
同期プランを製品に割り当てます。
Usage: hammer product set-sync-plan [OPTIONS] Options: --id ID Product numeric identifier --name NAME Product name to search by --new-name NEW_NAME Product name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --ssl-ca-cert-id SSL_CA_CERT_ID Idenifier of the SSL CA Cert --ssl-client-cert-id SSL_CLIENT_CERT_ID Identifier of the SSL Client Cert --ssl-client-key-id SSL_CLIENT_KEY_ID Identifier of the SSL Client Key --sync-plan SYNC_PLAN_NAME Sync plan name to search by --sync-plan-id SYNC_PLAN_ID Plan numeric identifier -h, --help Print help
2.59.7. hammer product synchronize
製品のすべてのリポジトリーを同期します。
Usage: hammer product synchronize [OPTIONS] Options: --async Do not wait for the task --id ID Product ID --name NAME Product name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.59.8. hammer product update
製品を更新します。
Usage: hammer product update [OPTIONS] Options: --description DESCRIPTION Product description --gpg-key-id GPG_KEY_ID Identifier of the GPG key --id ID Product numeric identifier --name NAME Product name to search by --new-name NEW_NAME Product name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --ssl-ca-cert-id SSL_CA_CERT_ID Idenifier of the SSL CA Cert --ssl-client-cert-id SSL_CLIENT_CERT_ID Identifier of the SSL Client Cert --ssl-client-key-id SSL_CLIENT_KEY_ID Identifier of the SSL Client Key --sync-plan SYNC_PLAN_NAME Sync plan name to search by --sync-plan-id SYNC_PLAN_ID Plan numeric identifier -h, --help Print help
2.59.9. hammer product update-proxy
製品の HTTP プロキシーを更新します。
Usage: hammer product update-proxy [OPTIONS] Options: --http-proxy HTTP_PROXY_NAME Name to search by --http-proxy-id HTTP_PROXY_ID HTTP Proxy identifier to associated --http-proxy-policy HTTP_PROXY_POLICY Policy for HTTP Proxy for content sync Possible value(s): 'global_default_http_proxy', 'none', 'use_selected_http_proxy' --ids IDS List of product ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.60. hammer proxy
スマートプロキシーを操作します。
Usage: hammer proxy [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: content Manage the capsule content create Create a capsule delete, destroy Delete a capsule import-classes Import puppet classes from puppet Capsule info, show Show a capsule list, index List all capsules refresh-features Refresh capsule features update Update a capsule Options: -h, --help Print help
2.60.1. hammer proxy content
Capsule コンテンツを管理します。
Usage: hammer proxy content [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-lifecycle-environment Add lifecycle environments to the capsule available-lifecycle-environments List the lifecycle environments not attached to the capsule cancel-synchronization Cancel running capsule synchronization info Get current capsule synchronization status lifecycle-environments List the lifecycle environments attached to the capsule remove-lifecycle-environment Remove lifecycle environments from the capsule synchronization-status Get current capsule synchronization status synchronize Synchronize the content to the capsule Options: -h, --help Print help
2.60.1.1. hammer proxy content add-lifecycle-environment
ライフサイクル環境を Capsule に追加します。
Usage: hammer proxy content add-lifecycle-environment [OPTIONS] Options: --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --id ID Id of the capsule --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name NAME Name to search by --organization NAME Organization name --organization-id ID Organization ID -h, --help Print help
2.60.1.2. hammer proxy content available-lifecycle-environments
Capsule に割り当てられていないライフサイクル環境を一覧表示します。
Usage: hammer proxy content available-lifecycle-environments [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the capsule --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Id of the organization to limit environments on --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Organization | x | x | -------------|-----|---------|-----
2.60.1.3. hammer proxy content cancel-synchronization
実行中の Capsule 同期をキャンセルします。
Usage: hammer proxy content cancel-synchronization [OPTIONS] Options: --id ID Id of the capsule --name NAME Name to search by -h, --help Print help
2.60.1.4. hammer proxy content info
現在の Capsule 同期ステータスを取得します。
Usage: hammer proxy content info [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the capsule --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Id of the organization to get the status for --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: -------------------------------------------------------------------|-----|-------- FIELDS | ALL | DEFAULT -------------------------------------------------------------------|-----|-------- Lifecycle environments/name | x | x Lifecycle environments/organization | x | x Lifecycle environments/content views/name | x | x Lifecycle environments/content views/composite | x | x Lifecycle environments/content views/last published | x | x Lifecycle environments/content views/content/hosts | x | x Lifecycle environments/content views/content/products | x | x Lifecycle environments/content views/content/yum repos | x | x Lifecycle environments/content views/content/container image repos | x | x Lifecycle environments/content views/content/packages | x | x Lifecycle environments/content views/content/package groups | x | x Lifecycle environments/content views/content/errata | x | x -------------------------------------------------------------------|-----|--------
2.60.1.5. hammer proxy content lifecycle-environments
Capsule に割り当てられたライフサイクル環境を一覧表示します。
Usage: hammer proxy content lifecycle-environments [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the capsule --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Id of the organization to limit environments on --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Organization | x | x | -------------|-----|---------|-----
2.60.1.6. hammer proxy content remove-lifecycle-environment
ライフサイクル環境を Capsule から削除します。
Usage: hammer proxy content remove-lifecycle-environment [OPTIONS] Options: --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --id ID Id of the capsule --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name NAME Name to search by --organization NAME Organization name --organization-id ID Organization ID -h, --help Print help
2.60.1.7. hammer proxy content synchronization-status
現在の Capsule 同期ステータスを取得します。
Usage: hammer proxy content synchronization-status [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Id of the capsule --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Id of the organization to get the status for --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: --------------------------------------|-----|-------- FIELDS | ALL | DEFAULT --------------------------------------|-----|-------- Last sync | x | x Status | x | x Currently running sync tasks/task id | x | x Currently running sync tasks/progress | x | x Last failure/task id | x | x Last failure/messages | x | x --------------------------------------|-----|--------
2.60.1.8. hammer proxy content synchronize
コンテンツと Capsule を同期します。
Usage: hammer proxy content synchronize [OPTIONS] Options: --async Do not wait for the task --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --id ID Id of the capsule --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name NAME Name to search by --organization NAME Organization name --organization-id ID Organization ID --skip-metadata-check SKIP_METADATA_CHECK Skip metadata check on each repository on the capsule One of true/false, yes/no, 1/0. -h, --help Print help
2.60.2. hammer proxy create
Capsule を作成します。
Usage: hammer proxy create [OPTIONS] Options: --download-policy DOWNLOAD_POLICY Download Policy of the capsule, must be one of on_demand, immediate, inherit --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --url URL -h, --help Print help
2.60.3. hammer proxy delete
Capsule を削除します。
Usage: hammer proxy <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.60.4. hammer proxy import-classes
Puppet Capsule から puppet クラスをインポートします。
Usage: hammer proxy import-classes [OPTIONS] Options: --dryrun Do not run the import --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --except EXCEPT Optional comma-delimited string containing either 'new', 'updated', or 'obsolete' that is used to limit the imported Puppet classes --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID -h, --help Print help
2.60.5. hammer proxy info
Capsule を表示します。
Usage: hammer proxy <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Url | x | x | Features | x | x | Features/ | x | x | Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | ---------------|-----|---------|-----
2.60.6. hammer proxy list
Capsule を一覧表示します。
Usage: hammer proxy <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ---------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------|-----|---------|----- Id | x | x | x Name | x | x | x Url | x | x | Features | x | x | ---------|-----|---------|----- Search / Order fields: feature string location string location_id integer name string organization string organization_id integer url string Search / Order fields: feature string location string location_id integer name string organization string organization_id integer url string
2.60.7. hammer proxy refresh-features
Capsule 機能をリフレッシュします。
Usage: hammer proxy refresh-features [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.60.8. hammer proxy update
Capsule を更新します。
Usage: hammer proxy update [OPTIONS] Options: --download-policy DOWNLOAD_POLICY Download Policy of the capsule, must be one of on_demand, immediate, inherit --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --url URL -h, --help Print help
2.61. hammer puppet-class
Puppet モジュールを検索します。
Usage: hammer puppet-class [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show a Puppet class list, index List all Puppet classes sc-params List all smart class parameters Options: -h, --help Print help
2.61.1. hammer puppet-class info
Puppet クラスを表示します。
Usage: hammer puppet-class <info|show> [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID ID of host --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID ID of host group --hostgroup-title HOSTGROUP_TITLE Hostgroup title --id ID ID of Puppet class --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Puppet class name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID -h, --help Print help Predefined field sets: ------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Smart class parameters/ | x | x | Hostgroups/ | x | x | Environments/ | x | x | Parameters/ | x | x | ------------------------|-----|---------|-----
2.61.2. hammer puppet-class list
Puppet クラスの一覧を表示します。
Usage: hammer puppet-class <list|index> [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID ID of host --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID ID of host group --hostgroup-title HOSTGROUP_TITLE Hostgroup title --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: config_group string environment string host string hostgroup string key string location string name string organization string
2.61.3. hammer puppet-class sc-params
スマートクラスパラメーターの一覧を表示します。
Usage: hammer puppet-class sc-params [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --puppet-class PUPPET_CLASS_NAME Puppet class name --puppet-class-id PUPPET_CLASS_ID --search SEARCH Filter results --show-hidden SHOW_HIDDEN Display hidden values One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: --------------|-----|-------- FIELDS | ALL | DEFAULT --------------|-----|-------- Id | x | x Parameter | x | x Default value | x | x Override | x | x --------------|-----|-------- Search / Order fields: avoid_duplicates Values: true, false environment string key string merge_default Values: true, false merge_overrides Values: true, false override Values: true, false parameter string puppetclass string puppetclass_name string
2.62. hammer puppet-environment
Puppet 環境を操作します。
Usage: hammer puppet-environment [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create an environment delete, destroy Delete an environment info, show Show an environment list, index List all environments sc-params List all smart class parameters update Update an environment Options: -h, --help Print help
2.62.1. hammer puppet-environment create
環境を作成します。
Usage: hammer puppet-environment create [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.62.2. hammer puppet-environment delete
環境を削除します。
Usage: hammer puppet-environment <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Puppet environment name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.62.3. hammer puppet-environment info
環境を表示します。
Usage: hammer puppet-environment <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Puppet environment name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Puppetclasses/ | x | x | Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | ---------------|-----|---------|-----
2.62.4. hammer puppet-environment list
環境を一覧表示します。
Usage: hammer puppet-environment <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --puppet-class PUPPET_CLASS_NAME Puppet class name --puppet-class-id PUPPET_CLASS_ID --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: location string location_id integer name string organization string organization_id integer Search / Order fields: location string location_id integer name string organization string organization_id integer
2.62.5. hammer puppet-environment sc-params
スマートクラスパラメーターの一覧を表示します。
Usage: hammer puppet-environment sc-params [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --search SEARCH Filter results --show-hidden SHOW_HIDDEN Display hidden values One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: --------------|-----|-------- FIELDS | ALL | DEFAULT --------------|-----|-------- Id | x | x Parameter | x | x Default value | x | x Override | x | x Puppet class | x | x Class id | x | x --------------|-----|-------- Search / Order fields: avoid_duplicates Values: true, false environment string key string merge_default Values: true, false merge_overrides Values: true, false override Values: true, false parameter string puppetclass string puppetclass_name string Search / Order fields: avoid_duplicates Values: true, false environment string key string merge_default Values: true, false merge_overrides Values: true, false override Values: true, false parameter string puppetclass string puppetclass_name string
2.62.6. hammer puppet-environment update
環境を更新します。
Usage: hammer puppet-environment update [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Puppet environment name --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.63. hammer realm
レルムを操作します。
Usage: hammer realm [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a realm delete, destroy Delete a realm info, show Show a realm list, index List of realms update Update a realm Options: -h, --help Print help
2.63.1. hammer realm create
レルムを作成します。
Usage: hammer realm create [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME The realm name, e.g. EXAMPLE.COM --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --realm-proxy-id REALM_PROXY_ID Capsule ID to use within this realm --realm-type REALM_TYPE Realm type, e.g. Red Hat Identity Management or Active Directory -h, --help Print help
2.63.2. hammer realm delete
レルムを削除します。
Usage: hammer realm <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.63.3. hammer realm info
レルムを表示します。
Usage: hammer realm <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Numerical ID or realm name --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Realm proxy id | x | x | Realm type | x | x | Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | ---------------|-----|---------|-----
2.63.4. hammer realm list
レルム一覧を表示します。
Usage: hammer realm <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: location string location_id integer name string organization string organization_id integer type string
2.63.5. hammer realm update
レルムを更新します。
Usage: hammer realm update [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Name to search by --new-name NEW_NAME The realm name, e.g. EXAMPLE.COM --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --realm-proxy-id REALM_PROXY_ID Capsule ID to use within this realm --realm-type REALM_TYPE Realm type, e.g. Red Hat Identity Management or Active Directory -h, --help Print help
2.64. hammer recurring-logic
再帰論理に関連したアクション
Usage: hammer recurring-logic [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: cancel Cancel recurring logic delete Delete all recuring logics filtered by the arguments info, show Show recurring logic details list, index List recurring logics Options: -h, --help Print help
2.64.1. hammer recurring-logic cancel
再帰論理をキャンセルします。
Usage: hammer recurring-logic cancel [OPTIONS] Options: --id ID ID of the recurring logic --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.64.2. hammer recurring-logic delete
引数でフィルターされたすべての再帰ロジックを削除します。
Usage: hammer recurring-logic delete [OPTIONS] Options: --cancelled Only delete cancelled recurring logics --finished Only delete finished recurring logics -h, --help Print help
2.64.3. hammer recurring-logic info
再帰論理の詳細を表示します。
Usage: hammer recurring-logic <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID ID of the recurring logic --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ----------------|-----|-------- FIELDS | ALL | DEFAULT ----------------|-----|-------- Id | x | x Cron line | x | x Action | x | x Last occurrence | x | x Next occurrence | x | x Iteration | x | x Iteration limit | x | x Repeat until | x | x State | x | x ----------------|-----|--------
2.64.4. hammer recurring-logic list
再帰論理の一覧を表示します。
Usage: hammer recurring-logic <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ----------|-----|-------- FIELDS | ALL | DEFAULT ----------|-----|-------- Id | x | x Cron line | x | x Iteration | x | x End time | x | x State | x | x ----------|-----|--------
2.65. hammer remote-execution-feature
リモート実行機能を管理します。
Usage: hammer remote-execution-feature [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show remote execution feature list, index List remote execution features update Update a job template Options: -h, --help Print help
2.65.1. hammer remote-execution-feature info
リモート実行機能を表示します。
Usage: hammer remote-execution-feature <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------------|-----|---------|----- Id | x | x | x Label | x | x | Name | x | x | x Description | x | x | Job template name | x | x | Job template id | x | x | ------------------|-----|---------|-----
2.65.2. hammer remote-execution-feature list
リモート実行機能を一覧表示します。
Usage: hammer remote-execution-feature <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------------|-----|---------|----- Id | x | x | x Name | x | x | x Description | x | x | Job template name | x | x | ------------------|-----|---------|-----
2.65.3. hammer remote-execution-feature update
ジョブテンプレートを更新します。
Usage: hammer remote-execution-feature update [OPTIONS] Options: --id ID --job-template JOB_TEMPLATE_NAME Name to search by --job-template-id JOB_TEMPLATE_ID Job template ID to be used for the feature --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.66. hammer report
レポートを参照および読み込みます。
Usage: hammer report [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: delete, destroy Delete a report info, show Show a report list, index List all reports Options: -h, --help Print help
2.66.1. hammer report delete
レポートを削除します。
Usage: hammer report <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.66.2. hammer report info
レポートを表示します。
Usage: hammer report <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: --------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------------------|-----|---------|----- Id | x | x | x Host | x | x | Reported at | x | x | Origin | x | x | Report status/applied | x | x | Report status/restarted | x | x | Report status/failed | x | x | Report status/restart failures | x | x | Report status/skipped | x | x | Report status/pending | x | x | Report metrics/config_retrieval | x | x | Report metrics/exec | x | x | Report metrics/file | x | x | Report metrics/package | x | x | Report metrics/service | x | x | Report metrics/user | x | x | Report metrics/yumrepo | x | x | Report metrics/filebucket | x | x | Report metrics/cron | x | x | Report metrics/total | x | x | Logs/resource | x | x | Logs/message | x | x | --------------------------------|-----|---------|-----
2.66.3. hammer report list
レポートの一覧を表示します。
Usage: hammer report <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------|-----|---------|----- Id | x | x | x Host | x | x | Last report | x | x | Origin | x | x | Applied | x | x | Restarted | x | x | Failed | x | x | Restart failures | x | x | Skipped | x | x | Pending | x | x | -----------------|-----|---------|----- Search / Order fields: applied integer environment string eventful Values: true, false failed integer failed_restarts integer host string host_id integer hostgroup string hostgroup_fullname string hostgroup_title string last_report datetime location string log text organization string origin string pending integer reported datetime resource text restarted integer skipped integer Search / Order fields: applied integer environment string eventful Values: true, false failed integer failed_restarts integer host string host_id integer hostgroup string hostgroup_fullname string hostgroup_title string last_report datetime location string log text organization string origin string pending integer reported datetime resource text restarted integer skipped integer
2.67. hammer report-template
レポートテンプレートを操作します。
Usage: hammer report-template [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: clone Clone a template create Create a report template delete, destroy Delete a report template dump View report content generate Generate report import Import a report template info, show Show a report template list, index List all report templates report-data Downloads a generated report schedule Schedule generating of a report update Update a report template Options: -h, --help Print help
2.67.1. hammer report-template clone
テンプレートのクローンを作成します。
Usage: hammer report-template clone [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.67.2. hammer report-template create
レポートテンプレートを作成します。
Usage: hammer report-template create [OPTIONS] Options: --audit-comment AUDIT_COMMENT --default DEFAULT Whether or not the template is added automatically to new organizations and locations One of true/false, yes/no, 1/0. --description DESCRIPTION --file LAYOUT Path to a file that contains the report template content --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locked LOCKED Whether or not the template is locked for editing One of true/false, yes/no, 1/0. --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --snippet SNIPPET One of true/false, yes/no, 1/0. -h, --help Print help -i, --interactive Open empty template in an $EDITOR. Upload the result
2.67.3. hammer report-template delete
レポートテンプレートを削除します。
Usage: hammer report-template <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.67.4. hammer report-template dump
レポートコンテンツを表示します。
Usage: hammer report-template dump [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------ FIELDS ------
2.67.5. hammer report-template generate
レポートを生成します。
Usage: hammer report-template generate [OPTIONS] Options: --gzip GZIP Compress the report uzing gzip One of true/false, yes/no, 1/0. --id ID --inputs INPUTS Specify inputs Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --path PATH Path to directory where downloaded content will be saved --report-format REPORT_FORMAT Report format, defaults to 'csv' Possible value(s): 'csv', 'json', 'yaml', 'html' -h, --help Print help
2.67.6. hammer report-template import
レポートテンプレートをインポートします。
Usage: hammer report-template import [OPTIONS] Options: --associate ASSOCIATE Determines when the template should associate objects based on metadata, new means only when new template is being created, always means both for new and existing template which is only being updated, never ignores metadata Possible value(s): 'new', 'always', 'never' --default DEFAULT Makes the template default meaning it will be automatically associated with newly created organizations and locations (false by default) One of true/false, yes/no, 1/0. --file PATH Path to a file that contains the report template content including metadata --force FORCE Use if you want update locked templates One of true/false, yes/no, 1/0. --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --lock LOCK Lock imported templates (false by default) One of true/false, yes/no, 1/0. --name NAME Template name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.67.7. hammer report-template info
レポートテンプレートを表示します。
Usage: hammer report-template <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ----------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Description | x | x | Locked | x | x | Default | x | x | Created at | x | x | Updated at | x | x | Locations/ | x | x | Organizations/ | x | x | Template inputs/id | x | x | Template inputs/name | x | x | Template inputs/description | x | x | Template inputs/required | x | x | Template inputs/options | x | x | ----------------------------|-----|---------|-----
2.67.8. hammer report-template list
全レポートテンプレートを一覧で表示します。
Usage: hammer report-template <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: default Values: true, false location string location_id integer locked Values: true, false name string organization string organization_id integer snippet Values: true, false template text
2.67.9. hammer report-template report-data
生成したレポートをダウンロードします。
Usage: hammer report-template report-data [OPTIONS] Options: --id ID --job-id JOB_ID ID assigned to generating job by the schedule command --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --path PATH Path to directory where downloaded content will be saved -h, --help Print help
2.67.10. hammer report-template schedule
レポートの生成をスケジュールします。
Usage: hammer report-template schedule [OPTIONS] Options: --generate-at GENERATE_AT UTC time to generate report at --gzip GZIP Compress the report using gzip One of true/false, yes/no, 1/0. --id ID --inputs INPUTS Specify inputs Comma-separated list of key=value. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --mail-to MAIL_TO If set, scheduled report will be delivered via e-mail. Use ',' to separate multiple email addresses. --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --path PATH Path to directory where downloaded content will be saved. Only usable if wait is specified --report-format REPORT_FORMAT Report format, defaults to 'csv' Possible value(s): 'csv', 'json', 'yaml', 'html' --wait Turns a command to be active, wait for the result and download it right away -h, --help Print help
2.67.11. hammer report-template update
レポートテンプレートを更新します。
Usage: hammer report-template update [OPTIONS] Options: --audit-comment AUDIT_COMMENT --default DEFAULT Whether or not the template is added automatically to new organizations and locations One of true/false, yes/no, 1/0. --description DESCRIPTION --file REPORT Path to a file that contains the report template content --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locked LOCKED Whether or not the template is locked for editing One of true/false, yes/no, 1/0. --name NAME Name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --snippet SNIPPET One of true/false, yes/no, 1/0. -h, --help Print help -i, --interactive Dump existing template and open it in an $EDITOR. Update with the result
2.68. hammer repository
リポジトリーを操作します。
Usage: hammer repository [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a custom repository delete, destroy Destroy a custom repository info, show Show a repository list, index List of enabled repositories remove-content Remove content from a repository synchronize Sync a repository update Update a repository upload-content Upload content into the repository Options: -h, --help Print help
2.68.1. hammer repository create
カスタムリポジトリーを作成します。
Usage: hammer repository create [OPTIONS] Options: --ansible-collection-auth-token ANSIBLE_COLLECTION_AUTH_TOKEN The token key to use for authentication. --ansible-collection-auth-url ANSIBLE_COLLECTION_AUTH_URL The URL to receive a session token from, e.g. used with Automation Hub. --ansible-collection-requirements ANSIBLE_COLLECTION_REQUIREMENTS Contents of requirement yaml file to sync from URL --ansible-collection-requirements-file REQUIREMENTS_FILE Location of the ansible collections requirements.yml file. --arch ARCH Architecture of content in the repository --checksum-type CHECKSUM_TYPE Checksum of the repository, currently 'sha1' & 'sha256' are supported --content-type CONTENT_TYPE Type of repo Possible value(s): 'ansible_collection', 'docker', 'file', 'yum' --deb-architectures DEB_ARCHITECTURES Whitespace-separated list of architectures to be synced from deb-archive --deb-components DEB_COMPONENTS Whitespace-separated list of repo components to be synced from deb-archive --deb-releases DEB_RELEASES Whitespace-separated list of releases to be synced from deb-archive --description DESCRIPTION Description of the repository --docker-tags-whitelist DOCKER_TAGS_WHITELIST Comma-separated list of tags to sync for Container Image repository Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --docker-upstream-name DOCKER_UPSTREAM_NAME Name of the upstream docker repository --download-concurrency DOWNLOAD_CONCURRENCY Used to determine download concurrency of the repository in pulp3. Use value less than 20. Defaults to 10 --download-policy DOWNLOAD_POLICY Download policy for yum repos (either 'immediate' or 'on_demand') Possible value(s): 'immediate', 'on_demand' --gpg-key-id GPG_KEY_ID Id of the gpg key that will be assigned to the new repository --http-proxy HTTP_PROXY_NAME Name to search by --http-proxy-id HTTP_PROXY_ID ID of a HTTP Proxy --http-proxy-policy HTTP_PROXY_POLICY Policies for HTTP Proxy for content sync Possible value(s): 'global_default_http_proxy', 'none', 'use_selected_http_proxy' --ignorable-content IGNORABLE_CONTENT List of content units to ignore while syncing a yum repository. Must be subset of srpm Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --label LABEL --mirror-on-sync MIRROR_ON_SYNC True if this repository when synced has to be mirrored from the source and stale rpms removed One of true/false, yes/no, 1/0. --name NAME Name of the repository --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --os-versions OS_VERSIONS Identifies whether the repository should be disabled on a client with a non-matching OS version. Pass [] to enable regardless of OS version. Maximum length 1; allowed tags are: rhel-6, rhel-7, rhel-8 Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ostree-upstream-sync-depth OSTREE_UPSTREAM_SYNC_DEPTH If a custom sync policy is chosen for ostree repositories then a 'depth' value must be provided --ostree-upstream-sync-policy OSTREE_UPSTREAM_SYNC_POLICY Policies for syncing upstream ostree repositories Possible value(s): 'latest', 'all', 'custom' --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product the repository belongs to --publish-via-http ENABLE Publish Via HTTP One of true/false, yes/no, 1/0. --ssl-ca-cert-id SSL_CA_CERT_ID Identifier of the content credential containing the SSL CA Cert --ssl-client-cert-id SSL_CLIENT_CERT_ID Identifier of the content credential containing the SSL Client Cert --ssl-client-key-id SSL_CLIENT_KEY_ID Identifier of the content credential containing the SSL Client Key --upstream-authentication-token UPSTREAM_AUTHENTICATION_TOKEN Password of the upstream authentication token. --upstream-password UPSTREAM_PASSWORD Password of the upstream repository user used for authentication --upstream-username UPSTREAM_USERNAME Username of the upstream repository user used for authentication --url URL Repository source url --verify-ssl-on-sync VERIFY_SSL_ON_SYNC If true, Katello will verify the upstream url's SSL certifcates are signed by a trusted CA One of true/false, yes/no, 1/0. -h, --help Print help
2.68.2. hammer repository delete
カスタムリポジトリーを破棄します。
Usage: hammer repository <delete|destroy> [OPTIONS] Options: --id ID --name NAME Repository name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier -h, --help Print help
2.68.3. hammer repository info
リポジトリーを表示します。
Usage: hammer repository <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Repository ID --name NAME Repository name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier -h, --help Print help Predefined field sets: ----------------------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Label | x | x | Description | x | x | Organization | x | x | Red hat repository | x | x | Content type | x | x | Checksum type | x | x | Mirror on sync | x | x | Url | x | x | Publish via http | x | x | Published at | x | x | Relative path | x | x | Download policy | x | x | Ostree upstream sync policy | x | x | Ostree upstream sync depth | x | x | Upstream repository name | x | x | Container image tags filter | x | x | Container repository name | x | x | Ignorable content units | x | x | Http proxy/id | x | x | Http proxy/name | x | x | Http proxy/http proxy policy | x | x | Product/id | x | x | Product/name | x | x | Gpg key/id | x | x | Gpg key/name | x | x | Sync/status | x | x | Sync/last sync date | x | x | Created | x | x | Updated | x | x | Content counts/packages | x | x | Content counts/source rpms | x | x | Content counts/package groups | x | x | Content counts/errata | x | x | Content counts/container image manifest lists | x | x | Content counts/container image manifests | x | x | Content counts/container image tags | x | x | Content counts/ostree branches | x | x | Content counts/files | x | x | Content counts/module streams | x | x | ----------------------------------------------|-----|---------|-----
2.68.4. hammer repository list
有効なリポジトリーの一覧を表示します。
Usage: hammer repository <list|index> [OPTIONS] Options: --ansible-collection ANSIBLE_COLLECTION_NAME Name to search by --ansible-collection-id ANSIBLE_COLLECTION_ID Id of an ansible collection to find repositories that contain the ansible collection --archived ARCHIVED Show archived repositories One of true/false, yes/no, 1/0. --available-for AVAILABLE_FOR Interpret specified object to return only Repositories that can be associated with specified object. Only 'content_view' & 'content_view_version' are supported. --content-type CONTENT_TYPE Limit to only repositories of this type Possible value(s): 'ansible_collection', 'docker', 'file', 'yum' --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID ID of a content view to show repositories in --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID ID of a content view version to show repositories in --deb DEB_NAME Name to search by --deb-id DEB_ID Id of a deb package to find repositories that contain the deb --description DESCRIPTION Description of the repository --download-policy DOWNLOAD_POLICY Limit to only repositories with this download policy Possible value(s): 'immediate', 'on_demand' --environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead) --erratum-id ERRATUM_ID Id of an erratum to find repositories that contain the erratum --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --file-id FILE_ID Id of a file to find repositories that contain the file --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --label LABEL Label of the repository --library LIBRARY Show repositories in Library and the default content view One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --name NAME Name of the repository --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID ID of an organization to show repositories in --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --ostree-branch OSTREE_BRANCH_NAME Name to search by --ostree-branch-id OSTREE_BRANCH_ID Id of an ostree branch to find repositories that contain that branch --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID ID of a product to show repositories of --rpm-id RPM_ID Id of a rpm package to find repositories that contain the rpm --search SEARCH Search string --username USERNAME Only show the repositories readable by this user with this username --with-content WITH_CONTENT Only repositories having at least one of the specified content type ex: rpm , erratum Possible value(s): 'ansible collection', 'docker_manifest', 'docker_manifest_list', 'docker_tag', 'docker_blob', 'file', 'rpm', 'modulemd', 'erratum', 'distribution', 'package_category', 'package_group', 'yum_repo_metadata_file', 'srpm' -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Product | x | x | Content type | x | x | Url | x | x | -------------|-----|---------|----- Search / Order fields: container_repository_name string content_label string content_type string content_view_id integer description text distribution_arch string distribution_bootable boolean distribution_family string distribution_variant string distribution_version string download_policy string label string name string product string product_id integer product_name string redhat Values: true, false
2.68.5. hammer repository remove-content
リポジトリーからコンテンツを削除します。
Usage: hammer repository remove-content [OPTIONS] Options: --content-type CONTENT_TYPE Content type ('deb', 'docker_manifest', 'file', 'ostree', 'rpm', 'srpm') Possible value(s): 'docker_manifest', 'file', 'rpm', 'srpm' --id ID Repository ID --ids IDS Array of content ids to remove Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Repository name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --sync-capsule SYNC_CAPSULE Whether or not to sync an external capsule after upload. Default: true One of true/false, yes/no, 1/0. -h, --help Print help
2.68.6. hammer repository synchronize
リポジトリーを同期します。
Usage: hammer repository synchronize [OPTIONS] Options: --async Do not wait for the task --id ID Repository ID --incremental INCREMENTAL Perform an incremental import One of true/false, yes/no, 1/0. --name NAME Repository name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --skip-metadata-check SKIP_METADATA_CHECK Force sync even if no upstream changes are detected. Only used with yum repositories. One of true/false, yes/no, 1/0. --source-url SOURCE_URL Temporarily override feed URL for sync --validate-contents VALIDATE_CONTENTS Force a sync and validate the checksums of all content. Only used with yum repositories. One of true/false, yes/no, 1/0. -h, --help Print help
2.68.7. hammer repository update
リポジトリーを更新します。
Usage: hammer repository update [OPTIONS] Options: --ansible-collection-auth-token ANSIBLE_COLLECTION_AUTH_TOKEN The token key to use for authentication. --ansible-collection-auth-url ANSIBLE_COLLECTION_AUTH_URL The URL to receive a session token from, e.g. used with Automation Hub. --ansible-collection-requirements ANSIBLE_COLLECTION_REQUIREMENTS Contents of requirement yaml file to sync from URL --ansible-collection-requirements-file REQUIREMENTS_FILE Location of the ansible collections requirements.yml file. --arch ARCH Architecture of content in the repository --checksum-type CHECKSUM_TYPE Checksum of the repository, currently 'sha1' & 'sha256' are supported --deb-architectures DEB_ARCHITECTURES Whitespace-separated list of architectures to be synced from deb-archive --deb-components DEB_COMPONENTS Whitespace-separated list of repo components to be synced from deb-archive --deb-releases DEB_RELEASES Whitespace-separated list of releases to be synced from deb-archive --description DESCRIPTION Description of the repository --docker-digest DIGEST Container Image manifest digest --docker-tag TAG Container Image tag --docker-tags-whitelist DOCKER_TAGS_WHITELIST Comma-separated list of tags to sync for Container Image repository Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --docker-upstream-name DOCKER_UPSTREAM_NAME Name of the upstream docker repository --download-concurrency DOWNLOAD_CONCURRENCY Used to determine download concurrency of the repository in pulp3. Use value less than 20. Defaults to 10 --download-policy DOWNLOAD_POLICY Download policy for yum repos (either 'immediate' or 'on_demand') Possible value(s): 'immediate', 'on_demand' --gpg-key-id GPG_KEY_ID Id of the gpg key that will be assigned to the new repository --http-proxy HTTP_PROXY_NAME Name to search by --http-proxy-id HTTP_PROXY_ID ID of a HTTP Proxy --http-proxy-policy HTTP_PROXY_POLICY Policies for HTTP Proxy for content sync Possible value(s): 'global_default_http_proxy', 'none', 'use_selected_http_proxy' --id ID Repository ID --ignorable-content IGNORABLE_CONTENT List of content units to ignore while syncing a yum repository. Must be subset of srpm Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --mirror-on-sync MIRROR_ON_SYNC True if this repository when synced has to be mirrored from the source and stale rpms removed One of true/false, yes/no, 1/0. --name NAME Repository name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID to search by --organization-label ORGANIZATION_LABEL Organization label to search by --os-versions OS_VERSIONS Identifies whether the repository should be disabled on a client with a non-matching OS version. Pass [] to enable regardless of OS version. Maximum length 1; allowed tags are: rhel-6, rhel-7, rhel-8 Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --ostree-upstream-sync-depth OSTREE_UPSTREAM_SYNC_DEPTH If a custom sync policy is chosen for ostree repositories then a 'depth' value must be provided --ostree-upstream-sync-policy OSTREE_UPSTREAM_SYNC_POLICY Policies for syncing upstream ostree repositories Possible value(s): 'latest', 'all', 'custom' --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --publish-via-http ENABLE Publish Via HTTP One of true/false, yes/no, 1/0. --ssl-ca-cert-id SSL_CA_CERT_ID Identifier of the content credential containing the SSL CA Cert --ssl-client-cert-id SSL_CLIENT_CERT_ID Identifier of the content credential containing the SSL Client Cert --ssl-client-key-id SSL_CLIENT_KEY_ID Identifier of the content credential containing the SSL Client Key --upstream-authentication-token UPSTREAM_AUTHENTICATION_TOKEN Password of the upstream authentication token. --upstream-password UPSTREAM_PASSWORD Password of the upstream repository user used for authentication --upstream-username UPSTREAM_USERNAME Username of the upstream repository user used for authentication --url URL Repository source url --verify-ssl-on-sync VERIFY_SSL_ON_SYNC If true, Katello will verify the upstream url's SSL certifcates are signed by a trusted CA One of true/false, yes/no, 1/0. -h, --help Print help
2.68.8. hammer repository upload-content
コンテンツをリポジトリーにアップロードします
Usage: hammer repository upload-content [OPTIONS] Options: --content-type CONTENT_TYPE Content type ('deb', 'docker_manifest', 'file', 'ostree', 'rpm', 'srpm') Possible value(s): 'docker_manifest', 'file', 'rpm', 'srpm' --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Repository ID --name NAME Repository name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --path PATH Upload file, directory of files, or glob of files as content for a repository. Globs must be escaped by single or double quotes --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier -h, --help Print help Predefined field sets: ------ FIELDS ------
2.69. hammer repository-set
サーバーでリポジトリーセットを操作します。
Usage: hammer repository-set [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: available-repositories Get list of available repositories for the repository set disable Disable a repository from the set enable Enable a repository from the set info, show Get info about a repository set list, index List repository sets. Options: -h, --help Print help
2.69.1. hammer repository-set available-repositories
リポジトリーセットの利用可能なリポジトリーの一覧を取得します。
Usage: hammer repository-set available-repositories [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID ID of the repository set --name NAME Repository set name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID ID of a product to list repository sets from -h, --help Print help Predefined field sets: --------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------|-----|---------|----- Name | x | x | x Arch | x | x | Release | x | x | Registry name | x | x | Enabled | x | x | --------------|-----|---------|-----
2.69.2. hammer repository-set disable
セットのリポジトリーを無効にします
Usage: hammer repository-set disable [OPTIONS] Options: --basearch BASEARCH Basearch to disable --id ID ID of the repository set to disable --name NAME Repository set name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID ID of the product containing the repository set --releasever RELEASEVER Releasever to disable -h, --help Print help
2.69.3. hammer repository-set enable
セットのリポジトリーを有効にします
Usage: hammer repository-set enable [OPTIONS] Options: --basearch BASEARCH Basearch to enable --id ID ID of the repository set to enable --name NAME Repository set name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID ID of the product containing the repository set --releasever RELEASEVER Releasever to enable -h, --help Print help
2.69.4. hammer repository-set info
リポジトリーセットの情報を取得します。
Usage: hammer repository-set <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID ID of the repository set --name NAME Repository set name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID ID of a product to list repository sets from -h, --help Print help Predefined field sets: --------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Type | x | x | Url | x | x | Gpg key | x | x | Label | x | x | Enabled repositories/id | x | x | Enabled repositories/name | x | x | --------------------------|-----|---------|-----
2.69.5. hammer repository-set list
リポジトリーセットを一覧で表示します。
Usage: hammer repository-set <list|index> [OPTIONS] Options: --activation-key ACTIVATION_KEY_NAME Activation key name to search by --activation-key-id ACTIVATION_KEY_ID Activation key identifier --content-access-mode-all CONTENT_ACCESS_MODE_ALL Get all content available, not just that provided by subscriptions. Relevant for Activation Keys only One of true/false, yes/no, 1/0. --content-access-mode-env CONTENT_ACCESS_MODE_ENV Limit content to just that available in the activation key's content view version. Relevant for Activation Keys only One of true/false, yes/no, 1/0. --enabled ENABLED If true, only return repository sets that have been enabled. Defaults to false One of true/false, yes/no, 1/0. --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID Id of the host --name NAME Repository set name to search on --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID ID of a product to list repository sets from --search SEARCH Search string --with-active-subscription WITH_ACTIVE_SUBSCRIPTION If true, only return repository sets that are associated with an active subscriptions One of true/false, yes/no, 1/0. --with-custom WITH_CUSTOM If true, return custom repository sets along with redhat repos One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Type | x | x | Name | x | x | x -------|-----|---------|----- Search / Order fields: content_label string content_type string enabled_by_default Values: true, false label string name string path string product_id integer product_name string
2.70. hammer role
ユーザーロールを操作します。
Usage: hammer role [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: clone Clone a role create Create a role delete, destroy Delete a role filters List all filters info, show Show a role list, index List all roles update Update a role Options: -h, --help Print help
2.70.1. hammer role clone
ロールのクローンを作成します。
Usage: hammer role clone [OPTIONS] Options: --description DESCRIPTION Role description --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME User role name --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.70.2. hammer role create
ロールを作成します。
Usage: hammer role create [OPTIONS] Options: --description DESCRIPTION Role description --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.70.3. hammer role delete
ロールの削除
Usage: hammer role <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME User role name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.70.4. hammer role filters
すべてのフィルターの一覧を表示します。
Usage: hammer role filters [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID User role id --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME User role name --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results -h, --help Print help Predefined field sets: --------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------|-----|---------|----- Id | x | x | x Resource type | x | x | Search | x | x | Unlimited? | x | x | Override? | x | x | Role | x | x | Permissions | x | x | --------------|-----|---------|-----
2.70.5. hammer role info
ロールを表示します。
Usage: hammer role <info|show> [OPTIONS] Options: --description DESCRIPTION --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME User role name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Builtin | x | x | Description | x | x | Locations/ | x | x | Organizations/ | x | x | ---------------|-----|---------|-----
2.70.6. hammer role list
ロールの一覧を表示します。
Usage: hammer role <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: --------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------|-----|---------|----- Id | x | x | x Name | x | x | x Builtin | x | x | --------|-----|---------|----- Search / Order fields: builtin Values: true, false description text name string permission string
2.70.7. hammer role update
ロールを更新します。
Usage: hammer role update [OPTIONS] Options: --description DESCRIPTION Role description --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME User role name --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.71. hammer sc-param
スマートクラスパラメーターを操作します。
Usage: hammer sc-param [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-matcher Create an override value for a specific smart class parameter info, show Show a smart class parameter list, index List all smart class parameters remove-matcher Delete an override value for a specific smart class parameter update Update a smart class parameter Options: -h, --help Print help
2.71.1. hammer sc-param add-matcher
特定のスマートクラスパラメーターの上書き値を作成します。
Usage: hammer sc-param add-matcher [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --match MATCH Override match --omit OMIT Satellite will not send this parameter in classification output One of true/false, yes/no, 1/0. --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --puppet-class PUPPET_CLASS_NAME Puppet class name --puppet-class-id PUPPET_CLASS_ID ID of Puppet class --smart-class-parameter SMART_CLASS_PARAMETER_NAME Smart class parameter name --smart-class-parameter-id SMART_CLASS_PARAMETER_ID --value VALUE Override value, required if omit is false -h, --help Print help
2.71.2. hammer sc-param info
スマートクラスパラメーターを表示します。
Usage: hammer sc-param <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Smart class parameter name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --puppet-class PUPPET_CLASS_NAME Puppet class name --puppet-class-id PUPPET_CLASS_ID ID of Puppet class --show-hidden SHOW_HIDDEN Display hidden values One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: ------------------------------------|-----|-------- FIELDS | ALL | DEFAULT ------------------------------------|-----|-------- Id | x | x Parameter | x | x Default value | x | x Override | x | x Puppet class | x | x Class id | x | x Description | x | x Type | x | x Hidden value? | x | x Omit | x | x Required | x | x Validator/type | x | x Validator/rule | x | x Override values/merge overrides | x | x Override values/merge default value | x | x Override values/avoid duplicates | x | x Override values/order | x | x Override values/values/id | x | x Override values/values/match | x | x Override values/values/value | x | x Override values/values/omit | x | x Environments/ | x | x Created at | x | x Updated at | x | x ------------------------------------|-----|--------
2.71.3. hammer sc-param list
スマートクラスパラメーターの一覧を表示します。
Usage: hammer sc-param <list|index> [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --host HOST_NAME Host name --host-id HOST_ID --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID --hostgroup-title HOSTGROUP_TITLE Hostgroup title --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --puppet-class PUPPET_CLASS_NAME Puppet class name --puppet-class-id PUPPET_CLASS_ID --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID --search SEARCH Filter results --show-hidden SHOW_HIDDEN Display hidden values One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: --------------|-----|-------- FIELDS | ALL | DEFAULT --------------|-----|-------- Id | x | x Parameter | x | x Default value | x | x Override | x | x Puppet class | x | x Class id | x | x --------------|-----|-------- Search / Order fields: avoid_duplicates Values: true, false environment string key string merge_default Values: true, false merge_overrides Values: true, false override Values: true, false parameter string puppetclass string puppetclass_name string
2.71.4. hammer sc-param remove-matcher
特定のスマートクラスパラメーターの上書き値を削除します。
Usage: hammer sc-param remove-matcher [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --puppet-class PUPPET_CLASS_NAME Puppet class name --puppet-class-id PUPPET_CLASS_ID ID of Puppet class --smart-class-parameter SMART_CLASS_PARAMETER_NAME Smart class parameter name --smart-class-parameter-id SMART_CLASS_PARAMETER_ID -h, --help Print help
2.71.5. hammer sc-param update
スマートクラスパラメーターを更新します。
Usage: hammer sc-param update [OPTIONS] Options: --avoid-duplicates AVOID_DUPLICATES Remove duplicate values (only array type) One of true/false, yes/no, 1/0. --default-value VALUE Value to use when there is no match --description DESCRIPTION Description of smart class --hidden-value HIDDEN_VALUE When enabled the parameter is hidden in the UI One of true/false, yes/no, 1/0. --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --merge-default MERGE_DEFAULT Include default value when merging all matching values One of true/false, yes/no, 1/0. --merge-overrides MERGE_OVERRIDES Merge all matching values (only array/hash type) One of true/false, yes/no, 1/0. --name NAME Smart class parameter name --omit OMIT Satellite will not send this parameter in classification output. Puppet will use the value defined in the Puppet manifest for this parameter One of true/false, yes/no, 1/0. --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --override OVERRIDE Override this parameter One of true/false, yes/no, 1/0. --override-value-order OVERRIDE_VALUE_ORDER The order in which values are resolved Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --parameter-type PARAMETER_TYPE Type of the parameter Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json' --path PATH The order in which values are resolved --puppet-class PUPPET_CLASS_NAME Puppet class name --puppet-class-id PUPPET_CLASS_ID ID of Puppet class --required REQUIRED This parameter is required One of true/false, yes/no, 1/0. --validator-rule VALIDATOR_RULE Used to enforce certain values for the parameter values --validator-type VALIDATOR_TYPE Type of the validator Possible value(s): 'regexp', 'list', '' -h, --help Print help
2.72. hammer scap-content
SCAP コンテンツを操作します。
Usage: hammer scap-content [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: bulk-upload Upload scap contents in bulk create Create SCAP content delete, destroy Deletes an SCAP content download Download an SCAP content as XML info, show Show an SCAP content list, index List SCAP contents update Update an SCAP content Options: -h, --help Print help
2.72.1. hammer scap-content bulk-upload
SCAP コンテンツを一括でアップロードします。
Usage: hammer scap-content bulk-upload [OPTIONS] Options: --directory DIRECTORY Directory to upload when using “directory” upload type --files FILES File paths to upload when using “files” upload type Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --type TYPE Type of the upload Possible value(s): 'files', 'directory', 'default' -h, --help Print help
2.72.2. hammer scap-content create
SCAP コンテンツを作成します。
Usage: hammer scap-content create [OPTIONS] Options: --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --original-filename ORIGINAL_FILENAME Original file name of the XML file --scap-file SCAP_FILE SCAP content file --title TITLE SCAP content name -h, --help Print help
2.72.3. hammer scap-content delete
SCAP コンテンツを削除します。
Usage: hammer scap-content <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --title TITLE SCAP content title -h, --help Print help
2.72.4. hammer scap-content download
XML で SCAP コンテンツをダウンロードします。
Usage: hammer scap-content download [OPTIONS] Options: --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --path PATH Path to directory where downloaded file will be saved --title TITLE SCAP content title -h, --help Print help
2.72.5. hammer scap-content info
SCAP コンテンツを表示します。
Usage: hammer scap-content <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --title TITLE SCAP content title -h, --help Print help Predefined field sets: ---------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------------------------|-----|---------|----- Id | x | x | x Title | x | x | x Digest | x | x | Created at | x | x | Original filename | x | x | Scap content profiles/id | x | x | Scap content profiles/profile id | x | x | Scap content profiles/title | x | x | Locations/ | x | x | Organizations/ | x | x | ---------------------------------|-----|---------|-----
2.72.6. hammer scap-content list
SCAP コンテンツの一覧を表示します。
Usage: hammer scap-content <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Title | x | x | x Digest | x | x | -------|-----|---------|----- Search / Order fields: created_at datetime filename string location string location_id integer organization string organization_id integer title string
2.72.7. hammer scap-content update
SCAP コンテンツを更新します。
Usage: hammer scap-content update [OPTIONS] Options: --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --new-title NEW_TITLE SCAP content name --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --original-filename ORIGINAL_FILENAME Original file name of the XML file --scap-file SCAP_FILE SCAP content file --title TITLE SCAP content title -h, --help Print help
2.73. hammer scap-content-profile
SCAP コンテンツプロファイルを操作します。
Usage: hammer scap-content-profile [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: list, index List SCAP content profiles Options: -h, --help Print help
2.73.1. hammer scap-content-profile list
SCAP コンテンツのプロファイルの一覧を表示します。
Usage: hammer scap-content-profile <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: --------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------|-----|---------|----- Id | x | x | x Title | x | x | Profile id | x | x | Scap content id | x | x | Scap content title | x | x | Tailoring file id | x | x | Tailoring file name | x | x | x --------------------|-----|---------|----- Search / Order fields: profile_id string title string
2.74. hammer settings
サーバー設定を変更します。
Usage: hammer settings [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show a setting list, index List all settings set Update a setting Options: -h, --help Print help
2.74.1. hammer settings info
設定を表示します。
Usage: hammer settings <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --name NAME Setting name -h, --help Print help Predefined field sets: --------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------|-----|---------|----- Id | x | x | x Name | x | x | x Description | x | x | Category | x | x | Settings type | x | x | Value | x | x | --------------|-----|---------|-----
2.74.2. hammer settings list
設定を一覧表示します。
Usage: hammer settings <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --order ORDER Sort field and order, eg. ‘id DESC’ --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Full name | x | x | Value | x | x | Description | x | x | ------------|-----|---------|----- Search / Order fields: description text name string
2.74.3. hammer settings set
設定を更新します。
Usage: hammer settings set [OPTIONS] Options: --id ID --name NAME Setting name --value VALUE -h, --help Print help
2.75. hammer shell
インタラクティブシェル
Usage: hammer shell [OPTIONS] Options: -h, --help Print help
2.76. hammer simple-content-access
シンプルコンテンツアクセスコマンド
Usage: hammer simple-content-access [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: disable Disable simple content access for a manifest enable Enable simple content access for a manifest Options: -h, --help Print help Unfortunately the server does not support such operation.
2.76.1. hammer simple-content-access disable
マニフェストの単純なコンテンツアクセスを無効化にします。
Usage: hammer simple-content-access disable [OPTIONS] Options: --async Do not wait for the task --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.76.2. hammer simple-content-access enable
マニフェストの単純なコンテンツアクセスを有効化にします。
Usage: hammer simple-content-access enable [OPTIONS] Options: --async Do not wait for the task --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.77. hammer srpm
ソース RPM を操作します。
Usage: hammer srpm [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show SRPM details list, index List srpms Options: -h, --help Print help
2.77.1. hammer srpm info
SRPM の詳細を表示します。
Usage: hammer srpm <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID SRPM details identifier --name NAME Name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Version | x | x | Architecture | x | x | Epoch | x | x | Release | x | x | Filename | x | x | Description | x | x | -------------|-----|---------|-----
2.77.2. hammer srpm list
srpm を一覧表示します。
Usage: hammer srpm <list|index> [OPTIONS] Options: --content-view CONTENT_VIEW_NAME Content view name to search by --content-view-id CONTENT_VIEW_ID Content view numeric identifier --content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number --content-view-version-id CONTENT_VIEW_VERSION_ID Content View Version identifier --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by --lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization identifier --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --product PRODUCT_NAME Product name to search by --product-id PRODUCT_ID Product numeric identifier --repository REPOSITORY_NAME Repository name to search by --repository-id REPOSITORY_ID Repository identifier --search SEARCH Search string -h, --help Print help Predefined field sets: ---------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------|-----|---------|----- Id | x | x | x Name | x | x | x Filename | x | x | ---------|-----|---------|-----
2.78. hammer status
サーバーやそのサブコンポーネントの完全なステータスを取得します。
Usage: hammer status [OPTIONS] [SUBCOMMAND] [ARG] ... Parameters: [ARG] ... Subcommand arguments [SUBCOMMAND] Subcommand (default: "foreman") Subcommands: foreman Shows status and version information of Satellite system and it's subcomponents katello Shows version information Options: -h, --help Print help
2.78.1. hammer status foreman
Satellite システムとそのサブコンポーネントのステータスとバージョン情報を表示します。
Usage: hammer status foreman [OPTIONS] Options: -h, --help Print help
2.78.2. hammer status katello
バージョン情報を表示します。
Usage: hammer status katello [OPTIONS] Options: -h, --help Print help
2.79. hammer subnet
サブネットを操作します。
Usage: hammer subnet [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a subnet delete, destroy Delete a subnet delete-parameter Delete parameter for a subnet info, show Show a subnet list, index List of subnets set-parameter Create or update parameter for a subnet update Update a subnet Options: -h, --help Print help
2.79.1. hammer subnet create
サブネットを作成します。
Usage: hammer subnet create [OPTIONS] Options: --bmc-id BMC_ID BMC Capsule ID to use within this subnet --boot-mode BOOT_MODE Default boot mode for interfaces assigned to this subnet. Possible value(s): 'Static', 'DHCP' --description DESCRIPTION Subnet description --dhcp DHCP_NAME DHCP Proxy to use within this subnet --dhcp-id DHCP_ID DHCP Capsule ID to use within this subnet --discovery-id DISCOVERY_ID ID of Discovery Capsule to use within this subnet for managing connection to discovered hosts --dns DNS_NAME DNS Proxy to use within this subnet --dns-id DNS_ID DNS Capsule ID to use within this subnet --dns-primary DNS_PRIMARY Primary DNS for this subnet --dns-secondary DNS_SECONDARY Secondary DNS for this subnet --domain-ids DOMAIN_IDS Domains in which this subnet is part Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --domains DOMAIN_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --externalipam-group EXTERNALIPAM_GROUP External IPAM group - only relevant when IPAM is set to external --externalipam-id EXTERNALIPAM_ID External IPAM Capsule ID to use within this subnet --from FROM Starting IP Address for IP auto suggestion --gateway GATEWAY Subnet gateway --httpboot-id HTTPBOOT_ID HTTPBoot Capsule ID to use within this subnet --ipam IPAM IP Address auto suggestion mode for this subnet. Possible value(s): 'DHCP', 'Internal DB', 'Random DB', 'EUI-64', 'External IPAM', 'None' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --mask MASK Netmask for this subnet --mtu MTU MTU for this subnet --name NAME Subnet name --network NETWORK Subnet network --network-type NETWORK_TYPE Type or protocol, IPv4 or IPv6, defaults to IPv4 Possible value(s): 'IPv4', 'IPv6' --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --prefix PREFIX Network prefix in CIDR notation (e.g. 64) for this subnet --remote-execution-proxy-ids REMOTE_EXECUTION_PROXY_IDS List of Capsule IDs to be used for remote execution Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --template-id TEMPLATE_ID Template HTTP(S) Capsule ID to use within this subnet --tftp TFTP_NAME TFTP Proxy to use within this subnet --tftp-id TFTP_ID TFTP Capsule ID to use within this subnet --to TO Ending IP Address for IP auto suggestion --vlanid VLANID VLAN ID for this subnet -h, --help Print help
2.79.2. hammer subnet delete
サブネットを削除します。
Usage: hammer subnet <delete|destroy> [OPTIONS] Options: --id ID Subnet numeric identifier --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Subnet name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.79.3. hammer subnet delete-parameter
サブネットのパラメーターを削除します。
Usage: hammer subnet delete-parameter [OPTIONS] Options: --name NAME Parameter name --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID -h, --help Print help
2.79.4. hammer subnet info
サブネットを表示します。
Usage: hammer subnet <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Subnet name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values One of true/false, yes/no, 1/0. -h, --help Print help Predefined field sets: ------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Description | x | x | Protocol | x | x | Priority | x | x | Network addr | x | x | Network prefix | x | x | Network mask | x | x | Gateway addr | x | x | Primary dns | x | x | Secondary dns | x | x | Smart proxies/dns | x | x | Smart proxies/tftp | x | x | Smart proxies/dhcp | x | x | Remote execution proxies/id | x | x | Remote execution proxies/name | x | x | Ipam | x | x | Start of ip range | x | x | End of ip range | x | x | Vlan id | x | x | Mtu | x | x | Boot mode | x | x | Domains/ | x | x | Locations/ | x | x | Organizations/ | x | x | Parameters/ | x | x | ------------------------------|-----|---------|-----
2.79.5. hammer subnet list
サブネットの一覧を表示します。
Usage: hammer subnet <list|index> [OPTIONS] Options: --domain DOMAIN_NAME Domain name --domain-id DOMAIN_ID ID of domain --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ----------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------|-----|---------|----- Id | x | x | x Name | x | x | x Network addr | x | x | Network prefix | x | x | Network mask | x | x | Vlan id | x | x | Boot mode | x | x | Gateway address | x | x | ----------------|-----|---------|----- Search / Order fields: boot_mode string dns_primary string dns_secondary string domain string gateway string ipam string location string location_id integer mask string mtu integer name text network string nic_delay integer organization string organization_id integer params string type string vlanid integer
2.79.6. hammer subnet set-parameter
サブネットのパラメーターを作成または更新します。
Usage: hammer subnet set-parameter [OPTIONS] Options: --hidden-value HIDDEN_VALUE Should the value be hidden One of true/false, yes/no, 1/0. --name NAME Parameter name --parameter-type PARAMETER_TYPE Type of the parameter Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json' Default: "string" --subnet SUBNET_NAME Subnet name --subnet-id SUBNET_ID --value VALUE Parameter value -h, --help Print help
2.79.7. hammer subnet update
サブネットを更新します。
Usage: hammer subnet update [OPTIONS] Options: --bmc-id BMC_ID BMC Capsule ID to use within this subnet --boot-mode BOOT_MODE Default boot mode for interfaces assigned to this subnet. Possible value(s): 'Static', 'DHCP' --description DESCRIPTION Subnet description --dhcp DHCP_NAME DHCP Proxy to use within this subnet --dhcp-id DHCP_ID DHCP Capsule ID to use within this subnet --discovery-id DISCOVERY_ID ID of Discovery Capsule to use within this subnet for managing connection to discovered hosts --dns DNS_NAME DNS Proxy to use within this subnet --dns-id DNS_ID DNS Capsule ID to use within this subnet --dns-primary DNS_PRIMARY Primary DNS for this subnet --dns-secondary DNS_SECONDARY Secondary DNS for this subnet --domain-ids DOMAIN_IDS Domains in which this subnet is part Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --domains DOMAIN_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --externalipam-group EXTERNALIPAM_GROUP External IPAM group - only relevant when IPAM is set to external --externalipam-id EXTERNALIPAM_ID External IPAM Capsule ID to use within this subnet --from FROM Starting IP Address for IP auto suggestion --gateway GATEWAY Subnet gateway --httpboot-id HTTPBOOT_ID HTTPBoot Capsule ID to use within this subnet --id ID Subnet numeric identifier --ipam IPAM IP Address auto suggestion mode for this subnet. Possible value(s): 'DHCP', 'Internal DB', 'Random DB', 'EUI-64', 'External IPAM', 'None' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --mask MASK Netmask for this subnet --mtu MTU MTU for this subnet --name NAME Subnet name --network NETWORK Subnet network --network-type NETWORK_TYPE Type or protocol, IPv4 or IPv6, defaults to IPv4 Possible value(s): 'IPv4', 'IPv6' --new-name NEW_NAME Subnet name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --prefix PREFIX Network prefix in CIDR notation (e.g. 64) for this subnet --remote-execution-proxy-ids REMOTE_EXECUTION_PROXY_IDS List of Capsule IDs to be used for remote execution Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --template-id TEMPLATE_ID Template HTTP(S) Capsule ID to use within this subnet --tftp TFTP_NAME TFTP Proxy to use within this subnet --tftp-id TFTP_ID TFTP Capsule ID to use within this subnet --to TO Ending IP Address for IP auto suggestion --vlanid VLANID VLAN ID for this subnet -h, --help Print help
2.80. hammer subscription
サブスクリプションを操作します。
Usage: hammer subscription [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: delete-manifest Delete manifest from Red Hat provider list, index List organization subscriptions manifest-history Obtain manifest history for subscriptions refresh-manifest Refresh previously imported manifest for Red Hat provider upload Upload a subscription manifest Options: -h, --help Print help
2.80.1. hammer subscription delete-manifest
Red Hat プロバイダーからマニフェストを削除します。
Usage: hammer subscription delete-manifest [OPTIONS] Options: --async Do not wait for the task --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization id --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.80.2. hammer subscription list
組織サブスクリプションの一覧を表示します。
Usage: hammer subscription <list|index> [OPTIONS] Options: --activation-key ACTIVATION_KEY_NAME Activation key name to search by --activation-key-id ACTIVATION_KEY_ID Activation key ID --available-for AVAILABLE_FOR Object to show subscriptions available for, either 'host' or 'activation_key' --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --host HOST_NAME Host name --host-id HOST_ID Id of a host --match-host MATCH_HOST Ignore subscriptions that are unavailable to the specified host One of true/false, yes/no, 1/0. --match-installed MATCH_INSTALLED Return subscriptions that match installed products of the specified host One of true/false, yes/no, 1/0. --name NAME Name of the subscription --no-overlap NO_OVERLAP Return subscriptions which do not overlap with a currently-attached subscription One of true/false, yes/no, 1/0. --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string -h, --help Print help Predefined field sets: -----------|-----|-------- FIELDS | ALL | DEFAULT -----------|-----|-------- Id | x | x Uuid | x | x Name | x | x Type | x | x Contract | x | x Account | x | x Support | x | x Start date | x | x End date | x | x Quantity | x | x Consumed | x | x -----------|-----|--------
2.80.3. hammer subscription manifest-history
サブスクリプションのマニフェスト履歴を取得します。
Usage: hammer subscription manifest-history [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: ---------------|-----|-------- FIELDS | ALL | DEFAULT ---------------|-----|-------- Status | x | x Status message | x | x Time | x | x ---------------|-----|--------
2.80.4. hammer subscription refresh-manifest
Red Hat プロバイダーに以前インポートしたマニフェストをリフレッシュします。
Usage: hammer subscription refresh-manifest [OPTIONS] Options: --async Do not wait for the task --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization id --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.80.5. hammer subscription upload
サブスクリプションマニフェストをアップロードします
Usage: hammer subscription upload [OPTIONS] Options: --async Do not wait for the task --file MANIFEST Subscription manifest file --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization id --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --repository-url REPOSITORY_URL Repository url -h, --help Print help
2.81. hammer sync-plan
同期プランを操作します。
Usage: hammer sync-plan [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a sync plan delete, destroy Destroy a sync plan info, show Show a sync plan list, index List sync plans update Update a sync plan Options: -h, --help Print help
2.81.1. hammer sync-plan create
同期プランを作成します。
Usage: hammer sync-plan create [OPTIONS] Options: --cron-expression CRON EXPRESSION Set this when interval is custom cron --description DESCRIPTION Sync plan description --enabled ENABLED Enables or disables synchronization One of true/false, yes/no, 1/0. --interval INTERVAL How often synchronization should run --name NAME Sync plan name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --sync-date SYNC_DATE Start date and time for the sync plan.Time is optional, if kept blank current system time will be considered Date and time in YYYY-MM-DD HH:MM:SS or ISO 8601 format -h, --help Print help
2.81.2. hammer sync-plan delete
同期プランを破棄します。
Usage: hammer sync-plan <delete|destroy> [OPTIONS] Options: --id ID Sync plan numeric identifier --name NAME Sync plan name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help
2.81.3. hammer sync-plan info
同期プランを表示します。
Usage: hammer sync-plan <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID Sync plan numeric identifier --name NAME Sync plan name to search by --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title -h, --help Print help Predefined field sets: -------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------------|-----|---------|----- Id | x | x | x Name | x | x | x Start date | x | x | Interval | x | x | Enabled | x | x | Cron expression | x | x | Recurring logic id | x | x | Description | x | x | Created at | x | x | Updated at | x | x | Next sync | x | x | Products/id | x | x | Products/name | x | x | -------------------|-----|---------|-----
2.81.4. hammer sync-plan list
同期プランの一覧を表示します。
Usage: hammer sync-plan <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --full-result FULL_RESULT Whether or not to show all results One of true/false, yes/no, 1/0. --interval INTERVAL Filter by interval Possible value(s): 'hourly', 'daily', 'weekly', 'custom cron' --name NAME Filter by name --order ORDER Sort field and order, eg. 'id DESC' --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return --search SEARCH Search string --sync-date SYNC_DATE Filter by sync date -h, --help Print help Predefined field sets: -------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------------|-----|---------|----- Id | x | x | x Name | x | x | x Start date | x | x | Interval | x | x | Enabled | x | x | Cron expression | x | x | Recurring logic id | x | x | -------------------|-----|---------|----- Search / Order fields: enabled Values: true, false interval string name string organization_id integer
2.81.5. hammer sync-plan update
同期プランを更新します。
Usage: hammer sync-plan update [OPTIONS] Options: --cron-expression CRON_EXPRESSION Add custom cron logic for sync plan --description DESCRIPTION Sync plan description --enabled ENABLED Enables or disables synchronization One of true/false, yes/no, 1/0. --id ID Sync plan numeric identifier --interval INTERVAL How often synchronization should run --name NAME Sync plan name to search by --new-name NEW_NAME Sync plan name --organization ORGANIZATION_NAME Organization name to search by --organization-id ORGANIZATION_ID Organization ID --organization-label ORGANIZATION_LABEL Organization label to search by --organization-title ORGANIZATION_TITLE Organization title --sync-date SYNC_DATE Start date and time of the synchronization Date and time in YYYY-MM-DD HH:MM:SS or ISO 8601 format -h, --help Print help
2.82. hammer tailoring-file
テーラリングファイルを操作します。
Usage: hammer tailoring-file [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a Tailoring file delete, destroy Deletes a Tailoring file download Download a Tailoring file as XML info, show Show a Tailoring file list, index List Tailoring files update Update a Tailoring file Options: -h, --help Print help
2.82.1. hammer tailoring-file create
テーラリングファイルを作成します。
Usage: hammer tailoring-file create [OPTIONS] Options: --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Tailoring file name --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --original-filename ORIGINAL_FILENAME Original file name of the XML file --scap-file SCAP_FILE Tailoring file content -h, --help Print help
2.82.2. hammer tailoring-file delete
テーラリングファイルを削除します。
Usage: hammer tailoring-file <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.82.3. hammer tailoring-file download
XML としてテーラリングファイルをダウンロードします。
Usage: hammer tailoring-file download [OPTIONS] Options: --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --name NAME Tailoring file name --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --path PATH Path to directory where downloaded file will be saved -h, --help Print help
2.82.4. hammer tailoring-file info
テーラリングファイルを表示します。
Usage: hammer tailoring-file <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --name NAME Tailoring file name --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request -h, --help Print help Predefined field sets: -----------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Created at | x | x | Original filename | x | x | Tailoring file profiles/id | x | x | Tailoring file profiles/profile id | x | x | Tailoring file profiles/title | x | x | Locations/ | x | x | Organizations/ | x | x | -----------------------------------|-----|---------|-----
2.82.5. hammer tailoring-file list
テーラリングファイルの一覧を表示します。
Usage: hammer tailoring-file <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: created_at datetime filename string location string location_id integer name string organization string organization_id integer
2.82.6. hammer tailoring-file update
テーラリングファイルを更新します。
Usage: hammer tailoring-file update [OPTIONS] Options: --id ID --location LOCATION_NAME Name to search by --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --name NAME Tailoring file name --new-name NEW_NAME Tailoring file name --organization ORGANIZATION_NAME Name to search by --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --original-filename ORIGINAL_FILENAME Original file name of the XML file --scap-file SCAP_FILE Tailoring file content -h, --help Print help
2.83. hammer task
タスクに関連するアクションを実行します。
Usage: hammer task [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: info, show Show task details list, index List tasks progress Show the progress of the task resume Resume all tasks paused in error state Options: -h, --help Print help
2.83.1. hammer task info
タスクの詳細を表示します。
Usage: hammer task <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID UUID of the task --location-id LOCATION_ID Set the current location context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request -h, --help Print help Predefined field sets: ------------|-----|-------- FIELDS | ALL | DEFAULT ------------|-----|-------- Id | x | x Action | x | x State | x | x Result | x | x Started at | x | x Ended at | x | x Owner | x | x Task errors | x | x ------------|-----|--------
2.83.2. hammer task list
タスクの一覧を表示します。
Usage: hammer task <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-id LOCATION_ID Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization-id ORGANIZATION_ID Set the current organization context for the request --page PAGE Page number, starting at 1 --parent-task-id PARENT_TASK_ID UUID of the task --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ------------|-----|-------- FIELDS | ALL | DEFAULT ------------|-----|-------- Id | x | x Action | x | x State | x | x Result | x | x Started at | x | x Ended at | x | x Owner | x | x Task errors | x | x ------------|-----|--------
2.83.3. hammer task progress
タスクの進捗状況を表示します。
Usage: hammer task progress [OPTIONS] Options: --id ID UUID of the task --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.83.4. hammer task resume
エラー状態で一時停止しているタスクをすべて再開します。
Usage: hammer task resume [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --search SEARCH Resume tasks matching search string --task-ids TASK_IDS Resume specific tasks by ID Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --tasks TASK_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help Predefined field sets: ----------------------------------------|-----|-------- FIELDS | ALL | DEFAULT ----------------------------------------|-----|-------- Total tasks found paused in error state | x | x Total tasks resumed | x | x Resumed tasks/task identifier | x | x Resumed tasks/task action | x | x Resumed tasks/task errors | x | x Total tasks failed to resume | x | x Failed tasks/task identifier | x | x Failed tasks/task action | x | x Failed tasks/task errors | x | x Total tasks skipped | x | x Skipped tasks/task identifier | x | x Skipped tasks/task action | x | x Skipped tasks/task errors | x | x ----------------------------------------|-----|--------
2.84. hammer template
プロビジョニングテンプレートを操作します。
Usage: hammer template [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-operatingsystem Associate an operating system build-pxe-default Update the default PXE menu on all configured TFTP servers clone Clone a provision template combination Manage template combinations create Create a provisioning template delete, destroy Delete a provisioning template dump View provisioning template content info, show Show provisioning template details kinds List available provisioning template kinds list, index List provisioning templates remove-operatingsystem Disassociate an operating system update Update a provisioning template Options: -h, --help Print help
2.84.1. hammer template add-operatingsystem
オペレーティングシステムを関連付けます。
Usage: hammer template add-operatingsystem [OPTIONS] Options: --id ID --name NAME Name to search by --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID -h, --help Print help
2.84.2. hammer template build-pxe-default
すべての設定済み TFTP サーバーでのデフォルト PXE メニューを更新します。
Usage: hammer template build-pxe-default [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.84.3. hammer template clone
プロビジョニングテンプレートのクローンを作成します。
Usage: hammer template clone [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --new-name NEW_NAME Template name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.84.4. hammer template combination
テンプレートの組み合わせを管理します。
Usage: hammer template combination [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Add a template combination delete, destroy Delete a template combination info, show Show template combination list, index List template combination update Update template combination Options: -h, --help Print help
2.84.4.1. hammer template combination create
テンプレートの組み合わせを追加します。
Usage: hammer template combination create [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID ID of host group --hostgroup-title HOSTGROUP_TITLE Hostgroup title --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --provisioning-template PROVISIONING_TEMPLATE_NAME Name to search by --provisioning-template-id PROVISIONING_TEMPLATE_ID ID of config template --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID -h, --help Print help
2.84.4.2. hammer template combination delete
テンプレートの組み合わせを削除します。
Usage: hammer template combination <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.84.4.3. hammer template combination info
テンプレートの組み合わせを表示します。
Usage: hammer template combination <info|show> [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID ID of host group --hostgroup-title HOSTGROUP_TITLE Hostgroup title --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --provisioning-template PROVISIONING_TEMPLATE_NAME Name to search by --provisioning-template-id PROVISIONING_TEMPLATE_ID ID of config template --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID -h, --help Print help Predefined field sets: ---------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------------------|-----|---------|----- Id | x | x | x Provisioning template id | x | x | Provisioning template name | x | x | Hostgroup id | x | x | Hostgroup name | x | x | Environment id | x | x | Environment name | x | x | Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | ---------------------------|-----|---------|-----
2.84.4.4. hammer template combination list
テンプレートの組み合わせを一覧で表示します。
Usage: hammer template combination <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --provisioning-template PROVISIONING_TEMPLATE_NAME Name to search by --provisioning-template-id PROVISIONING_TEMPLATE_ID ID of config template -h, --help Print help Predefined field sets: ----------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------|-----|---------|----- Id | x | x | x Provisioning template | x | x | Hostgroup | x | x | Environment | x | x | ----------------------|-----|---------|-----
2.84.4.5. hammer template combination update
テンプレートの組み合わせを更新します。
Usage: hammer template combination update [OPTIONS] Options: --environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment[-id] instead) --environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment[-id] instead) --hostgroup HOSTGROUP_NAME Hostgroup name --hostgroup-id HOSTGROUP_ID ID of host group --hostgroup-title HOSTGROUP_TITLE Hostgroup title --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --provisioning-template PROVISIONING_TEMPLATE_NAME Name to search by --provisioning-template-id PROVISIONING_TEMPLATE_ID ID of config template --puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name --puppet-environment-id PUPPET_ENVIRONMENT_ID -h, --help Print help
2.84.5. hammer template create
プロビジョニングテンプレートを作成します。
Usage: hammer template create [OPTIONS] Options: --audit-comment AUDIT_COMMENT --description DESCRIPTION --file TEMPLATE Path to a file that contains the template --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locked LOCKED Whether or not the template is locked for editing One of true/false, yes/no, 1/0. --name NAME Template name --operatingsystem-ids OPERATINGSYSTEM_IDS Array of operating system IDs to associate with the template Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --type TYPE Template type. Eg. snippet, script, provision -h, --help Print help
2.84.6. hammer template delete
プロビジョニングテンプレートを削除します。
Usage: hammer template <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.84.7. hammer template dump
プロビジョニングテンプレートコンテンツを表示します。
Usage: hammer template dump [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------ FIELDS ------
2.84.8. hammer template info
プロビジョニングテンプレートの詳細を表示します。
Usage: hammer template <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ---------------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Type | x | x | Description | x | x | Locked | x | x | Operating systems/ | x | x | Locations/ | x | x | Organizations/ | x | x | Template combinations/hostgroup name | x | x | Template combinations/environment name | x | x | ---------------------------------------|-----|---------|-----
2.84.9. hammer template kinds
利用可能なプロビジョニングテンプレートの種類を一覧表示します。
Usage: hammer template kinds [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Name | x | x | x -------|-----|---------|-----
2.84.10. hammer template list
プロビジョニングテンプレートの一覧を表示します。
Usage: hammer template <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID ID of operating system --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x Type | x | x | -------|-----|---------|----- Search / Order fields: default_template Values: true, false environment string hostgroup string kind string location string location_id integer locked Values: true, false name string operatingsystem string organization string organization_id integer snippet Values: true, false template text vendor string
2.84.11. hammer template remove-operatingsystem
オペレーティングシステムの関連付けを解除します。
Usage: hammer template remove-operatingsystem [OPTIONS] Options: --id ID --name NAME Name to search by --operatingsystem OPERATINGSYSTEM_TITLE Operating system title --operatingsystem-id OPERATINGSYSTEM_ID -h, --help Print help
2.84.12. hammer template update
プロビジョニングテンプレートを更新します。
Usage: hammer template update [OPTIONS] Options: --audit-comment AUDIT_COMMENT --description DESCRIPTION --file TEMPLATE Path to a file that contains the template --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locked LOCKED Whether or not the template is locked for editing One of true/false, yes/no, 1/0. --name NAME Name to search by --new-name NEW_NAME Template name --operatingsystem-ids OPERATINGSYSTEM_IDS Array of operating system IDs to associate with the template Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --type TYPE Template type. Eg. snippet, script, provision -h, --help Print help
2.85. hammer template-input
テンプレート入力を管理します。
Usage: hammer template-input [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a template input delete, destroy Delete a template input info, show Show template input details list, index List template inputs update Update a template input Options: -h, --help Print help
2.85.1. hammer template-input create
テンプレート入力を作成します。
Usage: hammer template-input create [OPTIONS] Options: --advanced ADVANCED Input is advanced One of true/false, yes/no, 1/0. --default DEFAULT Default value for user input --description DESCRIPTION Input description --fact-name FACT_NAME Fact name, used when input type is Fact value --hidden-value HIDDEN_VALUE The value contains sensitive information and shouldn not be normally visible, useful e.g. for passwords One of true/false, yes/no, 1/0. --input-type INPUT_TYPE Input type Possible value(s): 'user', 'fact', 'variable', 'puppet_parameter' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Input name --options OPTIONS Selectable values for user inputs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --puppet-class-name PUPPET_CLASS_NAME Puppet class name, used when input type is Puppet parameter --puppet-parameter-name PUPPET_PARAMETER_NAME Puppet parameter name, used when input type is Puppet parameter --required REQUIRED Input is required One of true/false, yes/no, 1/0. --resource-type RESOURCE_TYPE For values of type search, this is the resource the value searches in Possible value(s): 'AnsibleRole', 'AnsibleVariable', 'Architecture', 'Audit', 'AuthSource', 'Bookmark', 'ComputeProfile', 'ComputeResource', 'ConfigGroup', 'ConfigReport', 'DiscoveryRule', 'Domain', 'Environment', 'ExternalUsergroup', 'FactValue', 'Filter', 'ForemanOpenscap::ArfReport', 'ForemanOpenscap::OvalContent', 'ForemanOpenscap::OvalPolicy', 'ForemanOpenscap::Policy', 'ForemanOpenscap::ScapContent', 'ForemanOpenscap::TailoringFile', 'ForemanTasks::RecurringLogic', 'ForemanTasks::Task', 'ForemanVirtWhoConfigure::Config', 'Host', 'HostClass', 'Hostgroup', 'HttpProxy', 'Image', 'InsightsHit', 'JobInvocation', 'JobTemplate', 'Katello::ActivationKey', 'Katello::ContentView', 'Katello::GpgKey', 'Katello::HostCollection', 'Katello::KTEnvironment', 'Katello::Product', 'Katello::Subscription', 'Katello::SyncPlan', 'KeyPair', 'Location', 'MailNotification', 'Medium', 'Model', 'Operatingsystem', 'Organization', 'Parameter', 'PersonalAccessToken', 'ProvisioningTemplate', 'Ptable', 'Puppetclass', 'PuppetclassLookupKey', 'Realm', 'RemoteExecutionFeature', 'Report', 'ReportTemplate', 'Role', 'Setting', 'SmartProxy', 'SshKey', 'Subnet', 'Template', 'TemplateInvocation', 'User', 'Usergroup', 'Webhook', 'WebhookTemplate' --template-id TEMPLATE_ID --value-type VALUE_TYPE Value type, defaults to plain Possible value(s): 'plain', 'search', 'date' --variable-name VARIABLE_NAME Variable name, used when input type is Variable -h, --help Print help
2.85.2. hammer template-input delete
テンプレート入力を削除します。
Usage: hammer template-input <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --template-id TEMPLATE_ID -h, --help Print help
2.85.3. hammer template-input info
テンプレート入力詳細を表示します。
Usage: hammer template-input <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --template-id TEMPLATE_ID -h, --help Print help Predefined field sets: ----------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------|-----|---------|----- Id | x | x | x Name | x | x | x Input type | x | x | Fact name | x | x | Variable name | x | x | Puppet parameter name | x | x | Options | x | x | Default value | x | x | ----------------------|-----|---------|-----
2.85.4. hammer template-input list
テンプレート入力の一覧を表示します。
Usage: hammer template-input <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results --template-id TEMPLATE_ID -h, --help Print help Predefined field sets: -----------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------|-----|---------|----- Id | x | x | x Name | x | x | x Input type | x | x | -----------|-----|---------|----- Search / Order fields: input_type string name string
2.85.5. hammer template-input update
テンプレート入力を更新します。
Usage: hammer template-input update [OPTIONS] Options: --advanced ADVANCED Input is advanced One of true/false, yes/no, 1/0. --default DEFAULT Default value for user input --description DESCRIPTION Input description --fact-name FACT_NAME Fact name, used when input type is Fact value --hidden-value HIDDEN_VALUE The value contains sensitive information and shouldn not be normally visible, useful e.g. for passwords One of true/false, yes/no, 1/0. --id ID --input-type INPUT_TYPE Input type Possible value(s): 'user', 'fact', 'variable', 'puppet_parameter' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --new-name NEW_NAME Input name --options OPTIONS Selectable values for user inputs Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --puppet-class-name PUPPET_CLASS_NAME Puppet class name, used when input type is Puppet parameter --puppet-parameter-name PUPPET_PARAMETER_NAME Puppet parameter name, used when input type is Puppet parameter --required REQUIRED Input is required One of true/false, yes/no, 1/0. --resource-type RESOURCE_TYPE For values of type search, this is the resource the value searches in Possible value(s): 'AnsibleRole', 'AnsibleVariable', 'Architecture', 'Audit', 'AuthSource', 'Bookmark', 'ComputeProfile', 'ComputeResource', 'ConfigGroup', 'ConfigReport', 'DiscoveryRule', 'Domain', 'Environment', 'ExternalUsergroup', 'FactValue', 'Filter', 'ForemanOpenscap::ArfReport', 'ForemanOpenscap::OvalContent', 'ForemanOpenscap::OvalPolicy', 'ForemanOpenscap::Policy', 'ForemanOpenscap::ScapContent', 'ForemanOpenscap::TailoringFile', 'ForemanTasks::RecurringLogic', 'ForemanTasks::Task', 'ForemanVirtWhoConfigure::Config', 'Host', 'HostClass', 'Hostgroup', 'HttpProxy', 'Image', 'InsightsHit', 'JobInvocation', 'JobTemplate', 'Katello::ActivationKey', 'Katello::ContentView', 'Katello::GpgKey', 'Katello::HostCollection', 'Katello::KTEnvironment', 'Katello::Product', 'Katello::Subscription', 'Katello::SyncPlan', 'KeyPair', 'Location', 'MailNotification', 'Medium', 'Model', 'Operatingsystem', 'Organization', 'Parameter', 'PersonalAccessToken', 'ProvisioningTemplate', 'Ptable', 'Puppetclass', 'PuppetclassLookupKey', 'Realm', 'RemoteExecutionFeature', 'Report', 'ReportTemplate', 'Role', 'Setting', 'SmartProxy', 'SshKey', 'Subnet', 'Template', 'TemplateInvocation', 'User', 'Usergroup', 'Webhook', 'WebhookTemplate' --template-id TEMPLATE_ID --value-type VALUE_TYPE Value type, defaults to plain Possible value(s): 'plain', 'search', 'date' --variable-name VARIABLE_NAME Variable name, used when input type is Variable -h, --help Print help
2.86. hammer user
ユーザーを操作します。
Usage: hammer user [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: access-token Managing personal access tokens add-role Assign a user role create Create a user delete, destroy Delete a user info, show Show a user list, index List all users mail-notification Managing personal mail notifications remove-role Remove a user role ssh-keys Managing User SSH Keys. update Update a user Options: -h, --help Print help
2.86.1. hammer user access-token
パーソナルアクセストークンを管理します。
Usage: hammer user access-token [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a Personal Access Token for a user info, show Show a Personal Access Token for a user list, index List all Personal Access Tokens for a user revoke Revoke a Personal Access Token for a user Options: -h, --help Print help
2.86.1.1. hammer user access-token create
ユーザーのパーソナルアクセストークンを作成します。
Usage: hammer user access-token create [OPTIONS] Options: --expires-at EXPIRES_AT Expiry Date --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user USER_LOGIN User's login to search by --user-id USER_ID ID of the user -h, --help Print help
2.86.1.2. hammer user access-token info
ユーザーのパーソナルアクセストークンを表示します。
Usage: hammer user access-token <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user USER_LOGIN User's login to search by --user-id USER_ID ID of the user -h, --help Print help Predefined field sets: -------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------------|-----|---------|----- Id | x | x | x Name | x | x | x Active | x | x | Expires at | x | x | Created at | x | x | Last used at | x | x | -------------|-----|---------|-----
2.86.1.3. hammer user access-token list
ユーザーのパーソナルアクセストークンすべてを一覧表示します。
Usage: hammer user access-token <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results --user USER_LOGIN User's login to search by --user-id USER_ID ID of the user -h, --help Print help Predefined field sets: -----------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------|-----|---------|----- Id | x | x | x Name | x | x | x Active | x | x | Expires at | x | x | -----------|-----|---------|----- Search / Order fields: name string user_id integer
2.86.1.4. hammer user access-token revoke
ユーザーのパーソナルアクセストークンを取り消します。
Usage: hammer user access-token revoke [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user USER_LOGIN User's login to search by --user-id USER_ID ID of the user -h, --help Print help
2.86.2. hammer user add-role
ユーザーロールを割り当てます。
Usage: hammer user add-role [OPTIONS] Options: --id ID --login LOGIN User's login to search by --role ROLE_NAME User role name --role-id ROLE_ID -h, --help Print help
2.86.3. hammer user create
ユーザーを作成します。
Usage: hammer user create [OPTIONS] Options: --admin ADMIN Is an admin account One of true/false, yes/no, 1/0. --ask-password ASK_PW One of true/false, yes/no, 1/0. --auth-source AUTH_SOURCE_NAME Name to search by --auth-source-id AUTH_SOURCE_ID --default-location DEFAULT_LOCATION_NAME Default location name --default-location-id DEFAULT_LOCATION_ID --default-organization DEFAULT_ORGANIZATION_NAME Default organization name --default-organization-id DEFAULT_ORGANIZATION_ID --description DESCRIPTION --disabled DISABLED One of true/false, yes/no, 1/0. --firstname FIRSTNAME --lastname LASTNAME --locale LOCALE User's preferred locale Possible value(s): 'ca', 'cs_CZ', 'de', 'en', 'en_GB', 'es', 'fr', 'gl', 'it', 'ja', 'ko', 'nl_NL', 'pl', 'pt_BR', 'ru', 'sv_SE', 'zh_CN', 'zh_TW' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --login LOGIN --mail MAIL --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --password PASSWORD Required unless user is in an external authentication source --role-ids ROLE_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --roles ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --timezone TIMEZONE User's timezone Possible value(s): 'International Date Line West', 'American Samoa', 'Midway Island', 'Hawaii', 'Alaska', 'Pacific Time (US & Canada)', 'Tijuana', 'Arizona', 'Chihuahua', 'Mazatlan', 'Mountain Time (US & Canada)', 'Central America', 'Central Time (US & Canada)', 'Guadalajara', 'Mexico City', 'Monterrey', 'Saskatchewan', 'Bogota', 'Eastern Time (US & Canada)', 'Indiana (East)', 'Lima', 'Quito', 'Atlantic Time (Canada)', 'Caracas', 'Georgetown', 'La Paz', 'Puerto Rico', 'Santiago', 'Newfoundland', 'Brasilia', 'Buenos Aires', 'Greenland', 'Montevideo', 'Mid-Atlantic', 'Azores', 'Cape Verde Is.', 'Casablanca', 'Dublin', 'Edinburgh', 'Lisbon', 'London', 'Monrovia', 'UTC', 'Amsterdam', 'Belgrade', 'Berlin', 'Bern', 'Bratislava', 'Brussels', 'Budapest', 'Copenhagen', 'Ljubljana', 'Madrid', 'Paris', 'Prague', 'Rome', 'Sarajevo', 'Skopje', 'Stockholm', 'Vienna', 'Warsaw', 'West Central Africa', 'Zagreb', 'Zurich', 'Athens', 'Bucharest', 'Cairo', 'Harare', 'Helsinki', 'Jerusalem', 'Kaliningrad', 'Kyiv', 'Pretoria', 'Riga', 'Sofia', 'Tallinn', 'Vilnius', 'Baghdad', 'Istanbul', 'Kuwait', 'Minsk', 'Moscow', 'Nairobi', 'Riyadh', 'St. Petersburg', 'Volgograd', 'Tehran', 'Abu Dhabi', 'Baku', 'Muscat', 'Samara', 'Tbilisi', 'Yerevan', 'Kabul', 'Ekaterinburg', 'Islamabad', 'Karachi', 'Tashkent', 'Chennai', 'Kolkata', 'Mumbai', 'New Delhi', 'Sri Jayawardenepura', 'Kathmandu', 'Almaty', 'Astana', 'Dhaka', 'Urumqi', 'Rangoon', 'Bangkok', 'Hanoi', 'Jakarta', 'Krasnoyarsk', 'Novosibirsk', 'Beijing', 'Chongqing', 'Hong Kong', 'Irkutsk', 'Kuala Lumpur', 'Perth', 'Singapore', 'Taipei', 'Ulaanbaatar', 'Osaka', 'Sapporo', 'Seoul', 'Tokyo', 'Yakutsk', 'Adelaide', 'Darwin', 'Brisbane', 'Canberra', 'Guam', 'Hobart', 'Melbourne', 'Port Moresby', 'Sydney', 'Vladivostok', 'Magadan', 'New Caledonia', 'Solomon Is.', 'Srednekolymsk', 'Auckland', 'Fiji', 'Kamchatka', 'Marshall Is.', 'Wellington', 'Chatham Is.', 'Nuku'alofa', 'Samoa', 'Tokelau Is.' -h, --help Print help
2.86.4. hammer user delete
ユーザーを削除します。
Usage: hammer user <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --login LOGIN User's login to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.86.5. hammer user info
ユーザーを表示します。
Usage: hammer user <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --login LOGIN User's login to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: --------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------------------|-----|---------|----- Id | x | x | x Login | x | x | x Name | x | x | Email | x | x | Admin | x | x | Disabled | x | x | Last login | x | x | Authorized by | x | x | Effective admin | x | x | Locale | x | x | Timezone | x | x | Description | x | x | Default organization | x | x | Default location | x | x | Roles/ | x | x | User groups/usergroup | x | x | User groups/id | x | x | User groups/roles/ | x | x | Inherited user groups/usergroup | x | x | Inherited user groups/id | x | x | Inherited user groups/roles/ | x | x | Locations/ | x | x | Organizations/ | x | x | Created at | x | x | Updated at | x | x | --------------------------------|-----|---------|-----
2.86.6. hammer user list
ユーザーの一覧を表示します。
Usage: hammer user <list|index> [OPTIONS] Options: --auth-source-ldap AUTH_SOURCE_LDAP_NAME Name to search by --auth-source-ldap-id AUTH_SOURCE_LDAP_ID ID of LDAP authentication source --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Scope by locations --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Scope by organizations --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --role ROLE_NAME User role name --role-id ROLE_ID ID of role --search SEARCH Filter results --user-group USER_GROUP_NAME Name to search by --user-group-id USER_GROUP_ID -h, --help Print help Predefined field sets: --------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------|-----|---------|----- Id | x | x | x Login | x | x | x Name | x | x | Email | x | x | Admin | x | x | Disabled | x | x | Last login | x | x | Authorized by | x | x | --------------|-----|---------|----- Search / Order fields: admin Values: true, false auth_source string auth_source_type string description text disabled Values: true, false firstname string last_login_on datetime lastname string location string location_id integer login string mail string organization string organization_id integer role string role_id integer usergroup string
2.86.7. hammer user mail-notification
個人メールの通知を管理します。
Usage: hammer user mail-notification [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add Add an email notification for a user list, index List all email notifications for a user remove Remove an email notification for a user update Update an email notification for a user Options: -h, --help Print help
2.86.7.1. hammer user mail-notification add
ユーザーのメール通知を追加します。
Usage: hammer user mail-notification add [OPTIONS] Options: --interval INTERVAL Mail notification interval option, e.g. Daily, Weekly or Monthly. Required for summary notification --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --mail-notification MAIL_NOTIFICATION_NAME Name to search by --mail-notification-id MAIL_NOTIFICATION_ID --mail-query MAIL_QUERY Relevant only for audit summary notification --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --subscription SUBSCRIPTION Mail notification subscription option, e.g. Subscribe, Subscribe to my hosts or Subscribe to all hosts. Required for host built and config error state --user USER_LOGIN User's login to search by --user-id USER_ID -h, --help Print help
2.86.7.2. hammer user mail-notification list
ユーザーの全メール通知を一覧表示します。
Usage: hammer user mail-notification <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user USER_LOGIN User's login to search by --user-id USER_ID -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | Name | x | x | x Description | x | x | Interval | x | x | Mail query | x | x | ------------|-----|---------|-----
2.86.7.3. hammer user mail-notification remove
ユーザーのメール通知を削除します。
Usage: hammer user mail-notification remove [OPTIONS] Options: --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --mail-notification MAIL_NOTIFICATION_NAME Name to search by --mail-notification-id MAIL_NOTIFICATION_ID --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user USER_LOGIN User's login to search by --user-id USER_ID -h, --help Print help
2.86.7.4. hammer user mail-notification update
ユーザーのメール通知を更新します。
Usage: hammer user mail-notification update [OPTIONS] Options: --interval INTERVAL Mail notification interval option, e.g. Daily, Weekly or Monthly. Required for summary notification --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --mail-notification MAIL_NOTIFICATION_NAME Name to search by --mail-notification-id MAIL_NOTIFICATION_ID --mail-query MAIL_QUERY Relevant only for audit summary notification --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --subscription SUBSCRIPTION Mail notification subscription option, e.g. Subscribe, Subscribe to my hosts or Subscribe to all hosts. Required for host built and config error state --user USER_LOGIN User's login to search by --user-id USER_ID -h, --help Print help
2.86.8. hammer user remove-role
ユーザーロールを削除します。
Usage: hammer user remove-role [OPTIONS] Options: --id ID --login LOGIN User's login to search by --role ROLE_NAME User role name --role-id ROLE_ID -h, --help Print help
2.86.9. hammer user ssh-keys
ユーザーの SSH キーを操作します。
Usage: hammer user ssh-keys [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add Add an SSH key for a user delete, destroy Delete an SSH key for a user info, show Show an SSH key from a user list, index List all SSH keys for a user Options: -h, --help Print help
2.86.9.1. hammer user ssh-keys add
ユーザーの SSH キーを追加します。
Usage: hammer user ssh-keys add [OPTIONS] Options: --key KEY Public SSH key --key-file KEY_FILE Path to a SSH public key --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user USER_LOGIN User's login to search by --user-id USER_ID ID of the user -h, --help Print help
2.86.9.2. hammer user ssh-keys delete
ユーザーから SSH キーを削除します。
Usage: hammer user ssh-keys <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user USER_LOGIN User's login to search by --user-id USER_ID ID of the user -h, --help Print help
2.86.9.3. hammer user ssh-keys info
ユーザーの SSH キーを表示します。
Usage: hammer user ssh-keys <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user USER_LOGIN User's login to search by --user-id USER_ID ID of the user -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Fingerprint | x | x | Length | x | x | Created at | x | x | Public key | x | x | ------------|-----|---------|-----
2.86.9.4. hammer user ssh-keys list
ユーザーの SSH キーを一覧表示します。
Usage: hammer user ssh-keys <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results --user USER_LOGIN User's login to search by --user-id USER_ID ID of the user -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Fingerprint | x | x | Length | x | x | Created at | x | x | ------------|-----|---------|----- Search / Order fields: name string user_id integer
2.86.10. hammer user update
ユーザーを更新します。
Usage: hammer user update [OPTIONS] Options: --admin ADMIN Is an admin account One of true/false, yes/no, 1/0. --ask-password ASK_PW One of true/false, yes/no, 1/0. --auth-source AUTH_SOURCE_NAME Name to search by --auth-source-id AUTH_SOURCE_ID --current-password CURRENT_PASSWORD Required when user want to change own password --default-location DEFAULT_LOCATION_NAME Default location name --default-location-id DEFAULT_LOCATION_ID --default-organization DEFAULT_ORGANIZATION_NAME Default organization name --default-organization-id DEFAULT_ORGANIZATION_ID --description DESCRIPTION --disabled DISABLED One of true/false, yes/no, 1/0. --firstname FIRSTNAME --id ID --lastname LASTNAME --locale LOCALE User's preferred locale Possible value(s): 'ca', 'cs_CZ', 'de', 'en', 'en_GB', 'es', 'fr', 'gl', 'it', 'ja', 'ko', 'nl_NL', 'pl', 'pt_BR', 'ru', 'sv_SE', 'zh_CN', 'zh_TW' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --login LOGIN User's login to search by --mail MAIL --new-login NEW_LOGIN --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --password PASSWORD Required unless user is in an external authentication source --role-ids ROLE_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --roles ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --timezone TIMEZONE User's timezone Possible value(s): 'International Date Line West', 'American Samoa', 'Midway Island', 'Hawaii', 'Alaska', 'Pacific Time (US & Canada)', 'Tijuana', 'Arizona', 'Chihuahua', 'Mazatlan', 'Mountain Time (US & Canada)', 'Central America', 'Central Time (US & Canada)', 'Guadalajara', 'Mexico City', 'Monterrey', 'Saskatchewan', 'Bogota', 'Eastern Time (US & Canada)', 'Indiana (East)', 'Lima', 'Quito', 'Atlantic Time (Canada)', 'Caracas', 'Georgetown', 'La Paz', 'Puerto Rico', 'Santiago', 'Newfoundland', 'Brasilia', 'Buenos Aires', 'Greenland', 'Montevideo', 'Mid-Atlantic', 'Azores', 'Cape Verde Is.', 'Casablanca', 'Dublin', 'Edinburgh', 'Lisbon', 'London', 'Monrovia', 'UTC', 'Amsterdam', 'Belgrade', 'Berlin', 'Bern', 'Bratislava', 'Brussels', 'Budapest', 'Copenhagen', 'Ljubljana', 'Madrid', 'Paris', 'Prague', 'Rome', 'Sarajevo', 'Skopje', 'Stockholm', 'Vienna', 'Warsaw', 'West Central Africa', 'Zagreb', 'Zurich', 'Athens', 'Bucharest', 'Cairo', 'Harare', 'Helsinki', 'Jerusalem', 'Kaliningrad', 'Kyiv', 'Pretoria', 'Riga', 'Sofia', 'Tallinn', 'Vilnius', 'Baghdad', 'Istanbul', 'Kuwait', 'Minsk', 'Moscow', 'Nairobi', 'Riyadh', 'St. Petersburg', 'Volgograd', 'Tehran', 'Abu Dhabi', 'Baku', 'Muscat', 'Samara', 'Tbilisi', 'Yerevan', 'Kabul', 'Ekaterinburg', 'Islamabad', 'Karachi', 'Tashkent', 'Chennai', 'Kolkata', 'Mumbai', 'New Delhi', 'Sri Jayawardenepura', 'Kathmandu', 'Almaty', 'Astana', 'Dhaka', 'Urumqi', 'Rangoon', 'Bangkok', 'Hanoi', 'Jakarta', 'Krasnoyarsk', 'Novosibirsk', 'Beijing', 'Chongqing', 'Hong Kong', 'Irkutsk', 'Kuala Lumpur', 'Perth', 'Singapore', 'Taipei', 'Ulaanbaatar', 'Osaka', 'Sapporo', 'Seoul', 'Tokyo', 'Yakutsk', 'Adelaide', 'Darwin', 'Brisbane', 'Canberra', 'Guam', 'Hobart', 'Melbourne', 'Port Moresby', 'Sydney', 'Vladivostok', 'Magadan', 'New Caledonia', 'Solomon Is.', 'Srednekolymsk', 'Auckland', 'Fiji', 'Kamchatka', 'Marshall Is.', 'Wellington', 'Chatham Is.', 'Nuku'alofa', 'Samoa', 'Tokelau Is.' -h, --help Print help
2.87. hammer user-group
ユーザーグループを管理します。
Usage: hammer user-group [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: add-role Assign a user role add-user Associate an user add-user-group Associate an user group create Create a user group delete, destroy Delete a user group external View and manage user group's external user groups info, show Show a user group list, index List all user groups remove-role Remove a user role remove-user Disassociate an user remove-user-group Disassociate an user group update Update a user group Options: -h, --help Print help
2.87.1. hammer user-group add-role
ユーザーロールを割り当てます。
Usage: hammer user-group add-role [OPTIONS] Options: --id ID --name NAME Name to search by --role ROLE_NAME User role name --role-id ROLE_ID -h, --help Print help
2.87.2. hammer user-group add-user
ユーザーを関連付けます。
Usage: hammer user-group add-user [OPTIONS] Options: --id ID --name NAME Name to search by --user USER_LOGIN User's login to search by --user-id USER_ID -h, --help Print help
2.87.3. hammer user-group add-user-group
ユーザーグループを関連付けます。
Usage: hammer user-group add-user-group [OPTIONS] Options: --id ID --name NAME Name to search by --user-group USER_GROUP_NAME Name to search by --user-group-id USER_GROUP_ID -h, --help Print help
2.87.4. hammer user-group create
ユーザーグループを作成します。
Usage: hammer user-group create [OPTIONS] Options: --admin ADMIN Is an admin user group, can be modified by admins only One of true/false, yes/no, 1/0. --name NAME --role-ids ROLE_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --roles ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --user-group-ids USER_GROUP_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --user-groups USER_GROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --user-ids USER_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --users USER_LOGINS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.87.5. hammer user-group delete
ユーザーグループを削除します。
Usage: hammer user-group <delete|destroy> [OPTIONS] Options: --id ID --name NAME Name to search by -h, --help Print help
2.87.6. hammer user-group external
ユーザーグループの外部ユーザーグループを表示および管理します。
Usage: hammer user-group external [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create an external user group linked to a user group delete, destroy Delete an external user group info, show Show an external user group for user group list, index List all external user groups for user group refresh Refresh external user group update Update external user group Options: -h, --help Print help
2.87.6.1. hammer user-group external create
ユーザーグループにリンクされた外部ユーザーグループを作成します。
Usage: hammer user-group external create [OPTIONS] Options: --auth-source AUTH_SOURCE_NAME Name to search by --auth-source-id AUTH_SOURCE_ID ID of linked authentication source --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME External user group name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user-group USER_GROUP_NAME Name to search by --user-group-id USER_GROUP_ID -h, --help Print help
2.87.6.2. hammer user-group external delete
外部ユーザーグループを削除します。
Usage: hammer user-group external <delete|destroy> [OPTIONS] Options: --id ID ID or name external user group --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user-group USER_GROUP_NAME Name to search by --user-group-id USER_GROUP_ID -h, --help Print help
2.87.6.3. hammer user-group external info
ユーザーグループの外部ユーザーグループを表示します。
Usage: hammer user-group external <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID ID or name of external user group --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user-group USER_GROUP_NAME Name to search by --user-group-id USER_GROUP_ID -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Auth source | x | x | ------------|-----|---------|-----
2.87.6.4. hammer user-group external list
ユーザーグループの外部ユーザーグループの一覧を表示します。
Usage: hammer user-group external <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user-group USER_GROUP_NAME Name to search by --user-group-id USER_GROUP_ID -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Id | x | x | x Name | x | x | x Auth source | x | x | ------------|-----|---------|-----
2.87.6.5. hammer user-group external refresh
外部ユーザーグループをリフレッシュします。
Usage: hammer user-group external refresh [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID ID or name of external user group --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user-group USER_GROUP_NAME Name to search by --user-group-id USER_GROUP_ID -h, --help Print help Predefined field sets: ------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ------------|-----|---------|----- Name | x | x | x Auth source | x | x | ------------|-----|---------|-----
2.87.6.6. hammer user-group external update
外部ユーザーグループを更新します。
Usage: hammer user-group external update [OPTIONS] Options: --auth-source AUTH_SOURCE_NAME Name to search by --auth-source-id AUTH_SOURCE_ID ID of linked authentication source --id ID ID or name of external user group --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --new-name NEW_NAME External user group name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --user-group USER_GROUP_NAME Name to search by --user-group-id USER_GROUP_ID -h, --help Print help
2.87.7. hammer user-group info
ユーザーグループを表示します。
Usage: hammer user-group <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --name NAME Name to search by -h, --help Print help Predefined field sets: --------------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN --------------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Admin | x | x | Users/ | x | x | User groups/usergroup | x | x | User groups/id | x | x | User groups/roles/ | x | x | Inherited user groups/usergroup | x | x | Inherited user groups/id | x | x | Inherited user groups/roles/ | x | x | External user groups/ | x | x | Roles/ | x | x | Created at | x | x | Updated at | x | x | --------------------------------|-----|---------|-----
2.87.8. hammer user-group list
ユーザーグループの一覧を表示します。
Usage: hammer user-group <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --order ORDER Sort field and order, eg. ‘id DESC’ --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x Admin | x | x | -------|-----|---------|----- Search / Order fields: name string role string role_id integer
2.87.9. hammer user-group remove-role
ユーザーロールを削除します。
Usage: hammer user-group remove-role [OPTIONS] Options: --id ID --name NAME Name to search by --role ROLE_NAME User role name --role-id ROLE_ID -h, --help Print help
2.87.10. hammer user-group remove-user
ユーザーの関連付けを解除します。
Usage: hammer user-group remove-user [OPTIONS] Options: --id ID --name NAME Name to search by --user USER_LOGIN User's login to search by --user-id USER_ID -h, --help Print help
2.87.11. hammer user-group remove-user-group
ユーザーグループの関連付けを解除します。
Usage: hammer user-group remove-user-group [OPTIONS] Options: --id ID --name NAME Name to search by --user-group USER_GROUP_NAME Name to search by --user-group-id USER_GROUP_ID -h, --help Print help
2.87.12. hammer user-group update
ユーザーグループを更新します。
Usage: hammer user-group update [OPTIONS] Options: --admin ADMIN Is an admin user group, can be modified by admins only One of true/false, yes/no, 1/0. --id ID --name NAME Name to search by --new-name NEW_NAME --role-ids ROLE_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --roles ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --user-group-ids USER_GROUP_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --user-groups USER_GROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --user-ids USER_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --users USER_LOGINS Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.88. hammer virt-who-config
Virt Who 設定を管理します。
Usage: hammer virt-who-config [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a virt-who configuration delete, destroy Delete a virt-who configuration deploy Download and execute script for the specified virt-who configuration fetch Renders a deploy script for the specified virt-who configuration info, show Show a virt-who configuration list, index List of virt-who configurations update Update a virt-who configuration Options: -h, --help Print help
2.88.1. hammer virt-who-config create
virt-who 設定を作成します。
Usage: hammer virt-who-config create [OPTIONS] Options: --blacklist BLACKLIST Hypervisor blacklist, applicable only when filtering mode is set to 2. Wildcards and regular expressions are supported, multiple records must be separated by comma. --debug DEBUG Enable debugging output One of true/false, yes/no, 1/0. --exclude-host-parents EXCLUDE_HOST_PARENTS Applicable only for esx provider type. Hosts which parent (usually ComputeResource) name is specified in comma-separated list in this option will NOT be reported. Wildcards and regular expressions are supported, multiple records must be separated by comma. Put the value into the double-quotes if it contains special characters like comma. All new line characters will be removed in resulting configuration file, white spaces are removed from beginning and end. --filter-host-parents FILTER_HOST_PARENTS Applicable only for esx provider type. Only hosts which parent (usually ComputeResource) name is specified in comma-separated list in this option will be reported. Wildcards and regular expressions are supported, multiple records must be separated by comma. Put the value into the double-quotes if it contains special characters like comma. All new line characters will be removed in resulting configuration file, white spaces are removed from beginning and end. --filtering-mode MODE Hypervisor filtering mode Possible value(s): 'none', 'whitelist', 'blacklist' --http-proxy HTTP_PROXY_NAME Name to search by --http-proxy-id HTTP_PROXY_ID HTTP Proxy that should be used for communication between the server on which virt-who is running and the hypervisors and virtualization managers. --hypervisor-id HYPERVISOR_ID Specifies how the hypervisor will be identified. Possible value(s): 'hostname', 'uuid', 'hwuuid' --hypervisor-password HYPERVISOR_PASSWORD Hypervisor password, required for all hypervisor types except for libvirt --hypervisor-server HYPERVISOR_SERVER Fully qualified host name or IP address of the hypervisor --hypervisor-type HYPERVISOR_TYPE Hypervisor type Possible value(s): 'esx', 'hyperv', 'libvirt', 'kubevirt' --hypervisor-username HYPERVISOR_USERNAME Account name by which virt-who is to connect to the hypervisor. --interval INTERVAL Configuration interval in minutes Possible value(s): '60', '120', '240', '480', '720', '1440', '2880', '4320' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Configuration name --no-proxy NO_PROXY Ignore Proxy. A comma-separated list of hostnames or domains or ip addresses to ignore Capsule settings for. Optionally this may be set to * to bypass proxy settings for all hostnames domains or ip addresses. --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --satellite-url SATELLITE_URL Satellite server FQDN --whitelist WHITELIST Hypervisor whitelist, applicable only when filtering mode is set to 1. Wildcards and regular expressions are supported, multiple records must be separated by comma. -h, --help Print help
2.88.2. hammer virt-who-config delete
virt-who 設定を削除します。
Usage: hammer virt-who-config <delete|destroy> [OPTIONS] Options: --id ID Configuration numeric identifier --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.88.3. hammer virt-who-config deploy
指定した virt-who 設定のスクリプトをダウンロードおよび実行します。
Usage: hammer virt-who-config deploy [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.88.4. hammer virt-who-config fetch
指定した virt-who 設定の deploy スクリプトのレンダリングを行います。
Usage: hammer virt-who-config fetch [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help -o, --output FILE File where the script will be written
2.88.5. hammer virt-who-config info
virt-who 設定を表示します。
Usage: hammer virt-who-config <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ----------------------------------------|-----|-------- FIELDS | ALL | DEFAULT ----------------------------------------|-----|-------- General information/id | x | x General information/name | x | x General information/hypervisor type | x | x General information/hypervisor server | x | x General information/hypervisor username | x | x General information/configuration file | x | x General information/status | x | x Schedule/interval | x | x Schedule/last report at | x | x Connection/satellite server | x | x Connection/hypervisor id | x | x Connection/filtering | x | x Connection/excluded hosts | x | x Connection/filtered hosts | x | x Connection/filter host parents | x | x Connection/exclude host parents | x | x Connection/debug mode | x | x Connection/ignore proxy | x | x Http proxy/http proxy id | x | x Http proxy/http proxy name | x | x Http proxy/http proxy url | x | x Locations/ | x | x Organizations/ | x | x ----------------------------------------|-----|--------
2.88.6. hammer virt-who-config list
virt-who 設定一覧を表示します。
Usage: hammer virt-who-config <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: ---------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ---------------|-----|---------|----- Id | x | x | x Name | x | x | x Interval | x | x | Status | x | x | Last report at | x | x | ---------------|-----|---------|-----
2.88.7. hammer virt-who-config update
virt-who 設定を更新します。
Usage: hammer virt-who-config update [OPTIONS] Options: --blacklist BLACKLIST Hypervisor blacklist, applicable only when filtering mode is set to 2. Wildcards and regular expressions are supported, multiple records must be separated by comma. --debug DEBUG Enable debugging output One of true/false, yes/no, 1/0. --exclude-host-parents EXCLUDE_HOST_PARENTS Applicable only for esx provider type. Hosts which parent (usually ComputeResource) name is specified in comma-separated list in this option will NOT be reported. Wildcards and regular expressions are supported, multiple records must be separated by comma. Put the value into the double-quotes if it contains special characters like comma. All new line characters will be removed in resulting configuration file, white spaces are removed from beginning and end. --filter-host-parents FILTER_HOST_PARENTS Applicable only for esx provider type. Only hosts which parent (usually ComputeResource) name is specified in comma-separated list in this option will be reported. Wildcards and regular expressions are supported, multiple records must be separated by comma. Put the value into the double-quotes if it contains special characters like comma. All new line characters will be removed in resulting configuration file, white spaces are removed from beginning and end. --filtering-mode MODE Hypervisor filtering mode Possible value(s): 'none', 'whitelist', 'blacklist' --http-proxy HTTP_PROXY_NAME Name to search by --http-proxy-id HTTP_PROXY_ID HTTP Proxy that should be used for communication between the server on which virt-who is running and the hypervisors and virtualization managers. --hypervisor-id HYPERVISOR_ID Specifies how the hypervisor will be identified. Possible value(s): 'hostname', 'uuid', 'hwuuid' --hypervisor-password HYPERVISOR_PASSWORD Hypervisor password, required for all hypervisor types except for libvirt --hypervisor-server HYPERVISOR_SERVER Fully qualified host name or IP address of the hypervisor --hypervisor-type HYPERVISOR_TYPE Hypervisor type Possible value(s): 'esx', 'hyperv', 'libvirt', 'kubevirt' --hypervisor-username HYPERVISOR_USERNAME Account name by which virt-who is to connect to the hypervisor. --id ID Configuration numeric identifier --interval INTERVAL Configuration interval in minutes Possible value(s): '60', '120', '240', '480', '720', '1440', '2880', '4320' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --new-name NEW_NAME Configuration name --no-proxy NO_PROXY Ignore Proxy. A comma-separated list of hostnames or domains or ip addresses to ignore Capsule settings for. Optionally this may be set to * to bypass proxy settings for all hostnames domains or ip addresses. --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --satellite-url SATELLITE_URL Satellite server FQDN --whitelist WHITELIST Hypervisor whitelist, applicable only when filtering mode is set to 1. Wildcards and regular expressions are supported, multiple records must be separated by comma. -h, --help Print help
2.89. hammer webhook
Webhook を管理します。
Usage: hammer webhook [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: create Create a Webhook delete, destroy Delete a Webhook info, show Show Webhook details list, index List Webhooks update Update a Webhook Options: -h, --help Print help
2.89.1. hammer webhook create
Webhook を作成します。
Usage: hammer webhook create [OPTIONS] Options: --enabled ENABLED One of true/false, yes/no, 1/0. --event EVENT Possible value(s): 'actions.katello.content_view.promote_succeeded', 'actions.katello.content_view.publish_succeeded', 'actions.katello.repository.sync_succeeded', 'actions.remote_execution.run_host_job_ansible_configure_cloud_connector_succeeded', 'actions.remote_execution.run_host_job_ansible_enable_web_console_succeeded', 'actions.remote_execution.run_host_job_ansible_run_capsule_upgrade_succeeded', 'actions.remote_execution.run_host_job_ansible_run_host_succeeded', 'actions.remote_execution.run_host_job_ansible_run_insights_plan_succeeded', 'actions.remote_execution.run_host_job_ansible_run_playbook_succeeded', 'actions.remote_execution.run_host_job_foreman_openscap_run_oval_scans_succeeded', 'actions.remote_execution.run_host_job_foreman_openscap_run_scans_succeeded', 'actions.remote_execution.run_host_job_katello_errata_install_succeeded', 'actions.remote_execution.run_host_job_katello_group_install_succeeded', 'actions.remote_execution.run_host_job_katello_group_remove_succeeded', 'actions.remote_execution.run_host_job_katello_group_update_succeeded', 'actions.remote_execution.run_host_job_katello_module_stream_action_succeeded', 'actions.remote_execution.run_host_job_katello_package_install_succeeded', 'actions.remote_execution.run_host_job_katello_package_remove_succeeded', 'actions.remote_execution.run_host_job_katello_package_update_succeeded', 'actions.remote_execution.run_host_job_katello_service_restart_succeeded', 'actions.remote_execution.run_host_job_puppet_run_host_succeeded', 'actions.remote_execution.run_host_job_rh_cloud_remediate_hosts_succeeded', 'actions.remote_execution.run_host_job_succeeded', 'build_entered', 'build_exited', 'content_view_created', 'content_view_destroyed', 'content_view_updated', 'domain_created', 'domain_destroyed', 'domain_updated', 'host_created', 'host_destroyed', 'host_updated', 'hostgroup_created', 'hostgroup_destroyed', 'hostgroup_updated', 'model_created', 'model_destroyed', 'model_updated', 'status_changed', 'subnet_created', 'subnet_destroyed', 'subnet_updated', 'user_created', 'user_destroyed', 'user_updated' --http-content-type HTTP_CONTENT_TYPE --http-method HTTP_METHOD Possible value(s): 'POST', 'GET', 'PUT', 'DELETE', 'PATCH' --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --password PASSWORD --proxy-authorization PROXY_AUTHORIZATION Authorize with Satellite client certificate and validate capsule CA from Settings One of true/false, yes/no, 1/0. --target-url TARGET_URL --user USER --verify-ssl VERIFY_SSL One of true/false, yes/no, 1/0. --webhook-template WEBHOOK_TEMPLATE_NAME Name to search by --webhook-template-id WEBHOOK_TEMPLATE_ID -h, --help Print help
2.89.2. hammer webhook delete
Webhook を削除します。
Usage: hammer webhook <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.89.3. hammer webhook info
Webhook の詳細を表示します。
Usage: hammer webhook <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: -------------------------------|------------|-----|---------|----- FIELDS | ADDITIONAL | ALL | DEFAULT | THIN -------------------------------|------------|-----|---------|----- Id | | x | x | x Name | | x | x | x Target url | | x | x | Enabled | | x | x | Event | | x | x | Http method | | x | x | Http content type | | x | x | Webhook template | | x | x | User | x | x | | Verify ssl | x | x | | X509 certification authorities | x | x | | Http headers/ | x | x | | Created at | | x | x | Updated at | | x | x | -------------------------------|------------|-----|---------|-----
2.89.4. hammer webhook list
Webhook を一覧表示します。
Usage: hammer webhook <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -----------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -----------|-----|---------|----- Id | x | x | x Name | x | x | x Target url | x | x | Enabled | x | x | -----------|-----|---------|----- Search / Order fields: enabled Values: true, false name string target_url string
2.89.5. hammer webhook update
Webhook を更新します。
Usage: hammer webhook update [OPTIONS] Options: --enabled ENABLED One of true/false, yes/no, 1/0. --event EVENT Possible value(s): 'actions.katello.content_view.promote_succeeded', 'actions.katello.content_view.publish_succeeded', 'actions.katello.repository.sync_succeeded', 'actions.remote_execution.run_host_job_ansible_configure_cloud_connector_succeeded', 'actions.remote_execution.run_host_job_ansible_enable_web_console_succeeded', 'actions.remote_execution.run_host_job_ansible_run_capsule_upgrade_succeeded', 'actions.remote_execution.run_host_job_ansible_run_host_succeeded', 'actions.remote_execution.run_host_job_ansible_run_insights_plan_succeeded', 'actions.remote_execution.run_host_job_ansible_run_playbook_succeeded', 'actions.remote_execution.run_host_job_foreman_openscap_run_oval_scans_succeeded', 'actions.remote_execution.run_host_job_foreman_openscap_run_scans_succeeded', 'actions.remote_execution.run_host_job_katello_errata_install_succeeded', 'actions.remote_execution.run_host_job_katello_group_install_succeeded', 'actions.remote_execution.run_host_job_katello_group_remove_succeeded', 'actions.remote_execution.run_host_job_katello_group_update_succeeded', 'actions.remote_execution.run_host_job_katello_module_stream_action_succeeded', 'actions.remote_execution.run_host_job_katello_package_install_succeeded', 'actions.remote_execution.run_host_job_katello_package_remove_succeeded', 'actions.remote_execution.run_host_job_katello_package_update_succeeded', 'actions.remote_execution.run_host_job_katello_service_restart_succeeded', 'actions.remote_execution.run_host_job_puppet_run_host_succeeded', 'actions.remote_execution.run_host_job_rh_cloud_remediate_hosts_succeeded', 'actions.remote_execution.run_host_job_succeeded', 'build_entered', 'build_exited', 'content_view_created', 'content_view_destroyed', 'content_view_updated', 'domain_created', 'domain_destroyed', 'domain_updated', 'host_created', 'host_destroyed', 'host_updated', 'hostgroup_created', 'hostgroup_destroyed', 'hostgroup_updated', 'model_created', 'model_destroyed', 'model_updated', 'status_changed', 'subnet_created', 'subnet_destroyed', 'subnet_updated', 'user_created', 'user_destroyed', 'user_updated' --http-content-type HTTP_CONTENT_TYPE --http-method HTTP_METHOD Possible value(s): 'POST', 'GET', 'PUT', 'DELETE', 'PATCH' --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --password PASSWORD --proxy-authorization PROXY_AUTHORIZATION Authorize with Satellite client certificate and validate capsule CA from Settings One of true/false, yes/no, 1/0. --target-url TARGET_URL --user USER --verify-ssl VERIFY_SSL One of true/false, yes/no, 1/0. --webhook-template WEBHOOK_TEMPLATE_NAME Name to search by --webhook-template-id WEBHOOK_TEMPLATE_ID -h, --help Print help
2.90. hammer webhook-template
Webhook テンプレートを操作します。
Usage: hammer webhook-template [OPTIONS] SUBCOMMAND [ARG] ... Parameters: SUBCOMMAND Subcommand [ARG] ... Subcommand arguments Subcommands: clone Clone a template create Create a webhook template delete, destroy Delete a webhook template dump View webhook template content import Import a webhook template info, show Show webhook template details list, index List webhook templates update Update a webhook template Options: -h, --help Print help
2.90.1. hammer webhook-template clone
テンプレートのクローンを作成します。
Usage: hammer webhook-template clone [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.90.2. hammer webhook-template create
Webhook テンプレートを作成します。
Usage: hammer webhook-template create [OPTIONS] Options: --audit-comment AUDIT_COMMENT --default DEFAULT Whether or not the template is added automatically to new organizations and locations One of true/false, yes/no, 1/0. --description DESCRIPTION --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locked LOCKED Whether or not the template is locked for editing One of true/false, yes/no, 1/0. --name NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --snippet SNIPPET One of true/false, yes/no, 1/0. --template TEMPLATE -h, --help Print help
2.90.3. hammer webhook-template delete
Webhook テンプレートを削除します。
Usage: hammer webhook-template <delete|destroy> [OPTIONS] Options: --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help
2.90.4. hammer webhook-template dump
Webhook テンプレートコンテンツを表示します。
Usage: hammer webhook-template dump [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ------ FIELDS ------
2.90.5. hammer webhook-template import
Webhook テンプレートをインポートします。
Usage: hammer webhook-template import [OPTIONS] Options: --associate ASSOCIATE Determines when the template should associate objects based on metadata, new means only when new template is being created, always means both for new and existing template which is only being updated, never ignores metadata Possible value(s): 'new', 'always', 'never' --default DEFAULT Makes the template default meaning it will be automatically associated with newly created organizations and locations (false by default) One of true/false, yes/no, 1/0. --file PATH Path to a file that contains the webhook template content including metadata --force FORCE Use if you want update locked templates One of true/false, yes/no, 1/0. --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --lock LOCK Lock imported templates (false by default) One of true/false, yes/no, 1/0. --name NAME Template name --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters -h, --help Print help
2.90.6. hammer webhook-template info
Webhook テンプレートの詳細を表示します。
Usage: hammer webhook-template <info|show> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --name NAME Name to search by --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request -h, --help Print help Predefined field sets: ----------------------------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN ----------------------------|-----|---------|----- Id | x | x | x Name | x | x | x Description | x | x | Locked | x | x | Default | x | x | Created at | x | x | Updated at | x | x | Locations/ | x | x | Organizations/ | x | x | Template inputs/id | x | x | Template inputs/name | x | x | Template inputs/description | x | x | Template inputs/required | x | x | Template inputs/options | x | x | ----------------------------|-----|---------|-----
2.90.7. hammer webhook-template list
Webhook テンプレートの一覧を表示します。
Usage: hammer webhook-template <list|index> [OPTIONS] Options: --fields FIELDS Show specified fields or predefined field sets only. (See below) Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-title LOCATION_TITLE Set the current location context for the request --order ORDER Sort field and order, eg. ‘id DESC’ --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-title ORGANIZATION_TITLE Set the current organization context for the request --page PAGE Page number, starting at 1 --per-page PER_PAGE Number of results per page to return, 'all' to return all results --search SEARCH Filter results -h, --help Print help Predefined field sets: -------|-----|---------|----- FIELDS | ALL | DEFAULT | THIN -------|-----|---------|----- Id | x | x | x Name | x | x | x -------|-----|---------|----- Search / Order fields: default Values: true, false location string location_id integer locked Values: true, false name string organization string organization_id integer snippet Values: true, false template text
2.90.8. hammer webhook-template update
Webhook テンプレートを更新します。
Usage: hammer webhook-template update [OPTIONS] Options: --audit-comment AUDIT_COMMENT --default DEFAULT Whether or not the template is added automatically to new organizations and locations One of true/false, yes/no, 1/0. --description DESCRIPTION --id ID --location LOCATION_NAME Set the current location context for the request --location-id LOCATION_ID Set the current location context for the request --location-ids LOCATION_IDS REPLACE locations with given ids Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --location-title LOCATION_TITLE Set the current location context for the request --location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --locked LOCKED Whether or not the template is locked for editing One of true/false, yes/no, 1/0. --name NAME Name to search by --new-name NEW_NAME --organization ORGANIZATION_NAME Set the current organization context for the request --organization-id ORGANIZATION_ID Set the current organization context for the request --organization-ids ORGANIZATION_IDS REPLACE organizations with given ids. Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organization-title ORGANIZATION_TITLE Set the current organization context for the request --organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash. JSON is acceptable and preferred way for complex parameters --snippet SNIPPET One of true/false, yes/no, 1/0. --template TEMPLATE -h, --help Print help