Hammer CLI ガイド
Red Hat Satellite 6.7
Satellite の CLI ツール、Hammer の使用
概要
本ガイドは、Hammer CLI ツールを使用して Red Hat Satellite を設定/管理する方法を説明します。
第1章 Hammer の概要
Hammer は、Red Hat Satellite 6 で提供される強力なコマンドラインツールです。Hammer を使用して、CLI コマンド、またはシェルスクリプトによる自動化により、Red Hat Satellite Server を設定/管理することができます。Hammer は対話式のシェルも提供します。
Hammer と Satellite Web UI の比較
Web UI の操作感と比較すると、Hammer を使用する場合には環境変数やエイリアスなどのシェル機能が自由に使えるため、Satellite Server との対話がはるかに速くなります。また、Hammer のコマンドを再利用可能なスクリプトに組み込み、あらゆるレベルで複雑なタスクを自動化することもできます。Hammer コマンドからの出力を他のツールにリダイレクトして、既存の環境と統合することができます。Hammer コマンドは、Red Hat Satellite を稼働するベースオペレーティングシステムで直接実行できます。
Hammer コマンドを発行するには、Satellite Server のベースのオペレーティングシステムにアクセスする必要があるため、Web UI と比較すると、潜在的なユーザー数が限定されてしまいます。Hammer と Web UI の違いはほぼありませんが、Web UI の開発の優先度は高く、特に新しく導入される機能についてはこちらが優先されることがあります。
Hammer と Satellite API の比較
多くのタスクで、Hammer も Satellite API も同等に利用可能です。Hammer は、スクリプトに適用する前に API の呼び出しの応答をテストするなど、Satellite API よりも使いやすいインターフェースとして利用できます (hammer -d organization list など、Hammer で発行した API の呼び出しを検査するには -d オプションを使用します)。API での変更は自動的に Hammer に適用されますが、API を直接使用するスクリプトは手動で更新する必要があります。
バックグラウンドで、各 Hammer コマンドは最初に API へのバインドを確立し、要求を送信します。この動作は、大量の Hammer コマンドを順に実行する場合に、パフォーマンスに影響を与える可能性があります。反対に、API で直接通信するスクリプトではバインドを確立するのは一度で済みます。詳細は、『API ガイド』 を参照してください。
1.1. ヘルプ
hammer オプションおよびサブコマンドの完全な一覧を表示するには以下を実行します。
$ hammer --help
以下のように --help を使用してサブコマンドを確認します。
$ hammer organization --help
以下のように grep を使用して help の出力を検索するか、テキストビューワーにリダイレクトすることができます。
$ hammer | less
1.2. 認証
hammer コマンドを使用する場合は Red Hat Satellite に ID を証明する必要があります。hammer コマンドは手動または自動で実行できます。いずれの場合も、認証には Satellite 認証情報が必要です。hammer 認証には 3 つの方法があります。
- Hammer 認証セッション
- hammer 設定ファイルに認証情報を保存
- hammer コマンドを使用するたびに認証情報を指定
自動でコマンドを実行する場合は、hammer 設定ファイルを使用することが推奨されます。たとえば、cron ジョブから Satellite メンテナンスコマンドを実行する場合です。コマンドを手動で実行する場合は、hammer 認証セッションを使用して、コマンドを実行するたびに認証情報を提供する方法が推奨されます。
1.2.1. Hammer 認証セッション
Hammer 認証セッションでは、認証情報をキャッシュで保存するので、セッションの最初に一度だけ認証情報を入力する必要があります。この手法は、複数の Hammer コマンドを含むスクリプトなど、複数の Hammer コマンドを順次実行する場合に適して言います。このようなシナリオでは Satellite の認証情報を一度入力すると、スクリプトは想定通りに実行されます。Hammer の認証セッションを使用する場合は、スクリプト自体に認証情報を保存せず、~/.hammer/cli.modules.d/foreman.yml の hammer 設定ファイルに保存します。
セッションの使用方法は以下のようになります。
セッションを有効にするには、
:use_sessions: trueを~/.hammer/cli.modules.d/foreman.ymlファイルに追加します。:foreman: :use_sessions: true
セッションを有効にすると、設定ファイルに保存している認証情報は無視されます。
セッションを開始するには、以下のコマンドを入力します。
# hammer auth login
Satellite 認証情報が求められ、ログインします。その認証情報は、セッションの有効期限が切れるまで持続するため、再要求はされません。
セッションのデフォルトの長さは 60 分ですが、自由に変更できます。ニーズに合わせて時間を変更できます。たとえば、これを 30 分に変更するには、以下のコマンドを入力します。
# hammer settings set --name idle_timeout --value 30 Setting [idle_timeout] updated to [30]
セッションの現在のステータスを表示するには、以下のコマンドを実行します。
# hammer auth status
セッションを終了するには、以下のコマンドを入力します。
# hammer auth logout
1.2.2. Hammer 設定ファイル
--foreman-initial-admin-username および --foreman-initial-admin-password オプションを使用して Satellite のインストールを実行すると、入力した認証情報が ~/.hammer/cli.modules.d/foreman.yml に保存され、hammer により認証情報の入力が求められます。
認証情報は、手動で ~/.hammer/cli.modules.d/foreman.yml 設定ファイルに追加することもできます。
:foreman: :username: 'username' :password: 'password'
重要
hammer 設定ファイルのインデントには、スペースのみを使用するようにしてください。タブは使用しないでください。
1.2.3. コマンドライン
Satellite 認証情報を ~/.hammer/cli.modules.d/foreman.yml 設定ファイルに保存しないと、コマンドを入力するたびに hammer によって認証情報が求められます。以下のように、コマンドの実行時に認証情報を指定できます。
$ hammer -u username -p password subcommands
注記
本ガイドの例は、設定ファイルの認証情報が保存されているか、hammer 認証セッションを使用していることを前提としています。
1.3. スタンドアロンの Hammer の使用
Satellite Server がインストールされていないホストに、hammer をインストールして、リモートの Satellite への接続に使用できます。
前提条件
- Satellite Server または Capsule Server にホストを登録しておく。詳細は、『 プロビジョニングガイド』 の「 ホストの登録 」を参照してください。
Satellite Server または Capsule Server で以下のリポジトリーを同期しておく。詳細は、『 コンテンツ管理ガイド』 の「 Red Hat リポジトリーの同期 」を参照してください。
- rhel-7-server-rpms
- rhel-server-rhscl-7-rpms
- rhel-7-server-satellite-tools-6.7-rpms
手順
ホストで、以下の手順を実行して hammer をインストールします。
Red Hat Enterprise Linux、Red Hat Software Collections および Red Hat Satellite Tools 6.7 の各リポジトリーを有効にします。
# subscription-manager repos --enable=rhel-7-server-rpms \ --enable=rhel-server-rhscl-7-rpms \ --enable=rhel-7-server-satellite-tools-6.7-rpms
hammerをインストールします。# yum install tfm-rubygem-hammer_cli_katello
Satellite の IP アドレスまたは FQDN を含めるように、
/etc/hammer/cli.modules.d/foreman.ymlファイルの:host:エントリーを編集します。:host: 'https://satellite.example.com'
1.4. デフォルトの組織およびロケーションの設定
hammer コマンドの多くは、組織固有のものです。--organization および --location オプションで毎回指定する必要がないように、hammer コマンドにデフォルトの組織とロケーションを設定できます。
組織 を 1 つ管理することが多い場合には、入力するコマンドが短くなるので、デフォルトの組織を指定すると便利です。ただし、別の組織に切り替える場合には、hammer コマンドを使用して、--organization オプションで切り替える組織を指定します。
手順
デフォルトの組織と場所を設定するには、次の手順を実行します。
デフォルトの組織を設定するには、以下のコマンドを入力します。
# hammer defaults add --param-name organization \ --param-value "Your_Organization"hammer organization listコマンドを使用して、組織の名前を検索します。オプション: デフォルトのロケーションを設定するには、以下のコマンドを入力します。
# hammer defaults add --param-name location \ --param-value 'Your_Location"hammer location listコマンドを使用して、ロケーションの名前を検索します。現在指定しているデフォルトの設定を確認するには、以下のコマンドを実行します。
# hammer defaults list
1.5. Hammer の設定
デフォルトでは、グローバルの hammer 設定は以下の場所に配置されています。
-
一般的な
hammerの設定: /etc/hammer/cli_config.yml - CLI モジュールの設定ファイル: /etc/hammer/cli.modules.d/
hammer (~/.hammer/cli_config.yml) または CLI モジュール (~/.hammer/cli.modules.d/ の適切な .yml ファイル) にユーザー固有のディレクティブを設定できます。
設定ファイルの読み込み順と、読み込んだモジュールのバージョンを表示するには、以下を実行します。
$ hammer -d --version
注記
多くの CLI モジュールの設定を読み込むと、hammer コマンドの実行の速度が遅くなる可能性があります。このような場合に、あまり使用しない CLI モジュールを無効化することを検討してください。
「認証」に記載されているような認証情報を保存する以外に、~/.hammer/ 設定ディレクトリーに他の複数のオプションを設定できます。たとえば、~/.hammer/cli_config.yml でデフォルトのログレベルを変更して、以下のディレクティブを使用してログのローテーションを設定することができます。これらのディレクティブは、現在のユーザーにのみ影響を及ぼし、グローバルには適用されない点に注意してください。
:log_level: 'warning' :log_size: 5 #in MB
同様に、ユーザーインターフェースの設定を行います。たとえば、Hammer 出力で、要求ごとに表示するエントリー数を設定するには、以下の行を変更します。
:per_page: 30
この設定は、--per-page Hammer オプションと同等です。
1.6. Hammer ロギングの設定
hammer を設定して、さまざまな Satellite コンポーネントのデバッグ情報をロギングすることができます。
全 Satellite コンポーネントに対してデバッグまたは通常の設定オプションを設定できます。
注記
hammer のロギング動作を変更したら、Satellite サービスを再起動する必要があります。
# satellite-maintain service restart
全コンポーネントのデバッグレベルを設定するには、以下のコマンドを使用します。
# hammer admin logging --all --level-debug # satellite-maintain service restart
実稼動レベルのロギングを設定するには、以下のコマンドを使用します。
# hammer admin logging --all --level-production # satellite-maintain service restart
ロギングが設定可能なコンポーネントで現在認識されているものを表示するには、以下のコマンドを使用します。
# hammer admin logging --list
利用可能なロギングオプションを一覧表示するには、以下のコマンドを使用します。
# hammer admin logging --help Usage: hammer admin logging [OPTIONS]
1.7. Hammer シェルの呼び出し
対話型シェルで hammer コマンドを発行することができます。このシェルを呼び出すには、以下のコマンドを発行します。
$ hammer shell
このシェルでは、「hammer」と入力せずに直接サブコマンドを入力できるので、スクリプトで使用する前にコマンドをテストする際に便利です。このシェルを終了するには、exit と入力するか、[Ctrl + D] を押してください。
1.8. フォーマット済みの出力の生成
hammer コマンドのデフォルトの出力形式を変更して、他のコマンドラインツールやアプリケーションでこの出力結果を処理しやすくすることができます。たとえば、CSV 形式で、カスタムの区切り文字を利用して (ここではセミコロンを使用) 組織を表示するには、以下のコマンドを実行します。
$ hammer --csv --csv-separator ";" organization list
CSV 形式の出力は、ID を解析して for ループで使用する必要がある場合などに便利です。
--output オプションには、他に複数のフォーマットオプションがあります。
$ hammer --output output_format organization listoutput_format を、以下のいずれかに置き換えます。
-
table: 人間が判読できる表形式 (デフォルト) で出力を生成します。 -
base: キーと値のペアの形式で出力を生成します。 -
yaml: YAML 形式で出力を生成します。 -
csv: コンマ区切りの値形式で出力を生成します。カスタムの区切り文字を定義するには、代わりに--csvおよび--csv-separatorオプションを使用してください。 -
json: JavaScript Object Notation (JSON) 形式の出力を生成します。 -
silent: 出力を表示しません。
1.9. Hammer コマンドのヘッダー出力の非表示
hammer コマンドの使用時には、出力からヘッダーを隠すオプションがあります。カスタムスクリプトでパイプを使用するまたは出力を使用する場合は、出力の非表示が便利です。
-
ヘッダー出力を隠すには、
--no-headersオプションを hammer コマンドに追加します。
1.10. Hammer でのトラブルシューティング
hammer ping コマンドを使用して、コアの Satellite サービスのステータスを確認できます。satellite-maintain service status コマンドと併用すると、Satellite の問題の診断、トラブルシューティングに役立ちます。すべてのサービスが想定どおりに実行されている場合は、出力は以下のようになります。
$ hammer ping
candlepin:
Status: ok
Server Response: Duration: 22ms
candlepin_auth:
Status: ok
Server Response: Duration: 17ms
pulp:
Status: ok
Server Response: Duration: 41ms
pulp_auth:
Status: ok
Server Response: Duration: 23ms
foreman_tasks:
Status: ok
Server Response: Duration: 33ms第2章 参照
本章では、Hammer の使用方法の説明を一覧で紹介します。以下の使用方法は、Hammer の複数バージョンおよび、Satellite 6.7 向けにリリースされた Hammer のコンポーネントに対して最新の説明です。
2.1. Hammer
Usage:
hammer [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
activation-key Manipulate activation keys
admin Administrative server-side tasks
ansible Manage foreman ansible
architecture Manipulate architectures
arf-report Manipulate compliance reports
audit Search audit trails.
auth Foreman connection login/logout
auth-source Manipulate auth sources
bootdisk Download boot disks
capsule Manipulate capsule
compute-profile Manipulate compute profiles
compute-resource Manipulate compute resources
config-group Manipulate config groups
config-report Browse and read reports
content-view Manipulate content views
defaults Defaults management
discovery Manipulate discovered hosts.
discovery-rule Manipulate discovered rules.
docker Manipulate docker content
domain Manipulate domains
environment Manipulate environments
erratum Manipulate errata
export-templates Export templates to a git repo or a directory on the server
fact Search facts
file Manipulate files
filter Manage permission filters
foreign-input-set Manage foreign input sets
full-help Print help for all hammer commands
global-parameter Manipulate global parameters
gpg Manipulate GPG Key actions on the server
host Manipulate hosts
host-collection Manipulate host collections
hostgroup Manipulate hostgroups
http-proxy Manipulate http proxies
import-templates Import templates from a git repo or a directory on the server
job-invocation Manage job invocations
job-template Manage job templates
lifecycle-environment Manipulate lifecycle_environments on the server
location Manipulate locations
medium Manipulate installation media
model Manipulate hardware models
module-stream View Module Streams
organization Manipulate organizations
os Manipulate operating system
ostree-branch Manipulate ostree branches
package Manipulate packages
package-group Manipulate package groups
partition-table Manipulate partition tables
ping Get the status of the server and/or it's subcomponents
policy Manipulate policies
product Manipulate products
proxy Manipulate smart proxies
puppet-class Search puppet modules
puppet-environment Manipulate Puppet environments
puppet-module View Puppet Module details
realm Manipulate realms
recurring-logic Recurring logic related actions
remote-execution-feature Manage remote execution features
report Browse and read reports
report-template Manipulate report templates
repository Manipulate repositories
repository-set Manipulate repository sets on the server
role Manage user roles
sc-param Manipulate smart class parameters
scap-content Manipulate SCAP contents
settings Change server settings
shell Interactive shell
smart-variable Manipulate smart variables
srpm Manipulate source RPMs
status Get the complete status of the server and/or it's subcomponents
subnet Manipulate subnets
subscription Manipulate subscriptions
sync-plan Manipulate sync plans
tailoring-file Manipulate Tailoring files
task Tasks related actions.
template Manipulate config templates
template-input Manage template inputs
user Manipulate users
user-group Manage user groups
virt-who-config Manage Virt Who configurations
Options:
--[no-]use-defaults Enable/disable stored defaults. Enabled by default
--autocomplete LINE Get list of possible endings
--csv Output as CSV (same as --output=csv)
--csv-separator SEPARATOR Character to separate the values
--fetch-ca-cert SERVER Fetch CA certificate from server and exit
--interactive INTERACTIVE Explicitly turn interactive mode on/off
One of true/false, yes/no, 1/0.
--no-headers Hide headers from output
--output ADAPTER Set output format
Possible value(s): 'base', 'table', 'silent', 'csv', 'yaml', 'json'
--output-file OUTPUT_FILE Path to custom output file
--show-ids Show ids of associated resources
--ssl-ca-file CA_FILE Configure the file containing the CA certificates
--ssl-ca-path CA_PATH Configure the directory containing the CA certificates
--ssl-client-cert CERT_FILE Configure the client's public certificate
--ssl-client-key KEY_FILE Configure the client's private key
--ssl-with-basic-auth Use standard authentication in addition to client certificate authentication
--verify-ssl VERIFY_SSL Configure SSL verification of remote system
One of true/false, yes/no, 1/0.
--version Show version
-c, --config CFG_FILE Path to custom config file
-d, --debug Show debugging output
-h, --help Print help
-p, --password PASSWORD Password to access the remote system
-q, --quiet Completely silent
-r, --reload-cache Force reload of Apipie cache
-s, --server SERVER Remote system address
-u, --username USERNAME Username to access the remote system
-v, --[no-]verbose Be verbose (or not). True by default2.2. hammer activation-key
アクティベーションキーを操作します
Usage:
hammer activation-key [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
add-host-collection Associate a resource
add-subscription Add subscription
content-override Override product content defaults
copy Copy an activation key
create Create an activation key
delete Destroy an activation key
host-collections List associated host collections
info Show an activation key
list List activation keys
product-content List associated products
remove-host-collection Disassociate a resource
remove-subscription Remove subscription
subscriptions List associated subscriptions
update Update an activation key
Options:
-h, --help Print help2.2.1. hammer activation-key add-host-collection
リソースを関連付けます。
Usage:
hammer activation-key add-host-collection [OPTIONS]
Options:
--host-collection HOST_COLLECTION_NAME Host collection name to search by
--host-collection-id HOST_COLLECTION_ID Id of the host collection
--id ID ID of the activation key
--name NAME Activation key name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.2.2. hammer activation-key add-subscription
サブスクリプションを追加します。
Usage:
hammer activation-key add-subscription [OPTIONS]
Options:
--id ID ID of the activation key
--name NAME Activation key name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--quantity QUANTITY Quantity of this subscription to add
--subscription SUBSCRIPTION_NAME Subscription name to search by
--subscription-id SUBSCRIPTION_ID Subscription identifier
--subscriptions SUBSCRIPTIONS Array of subscriptions to add
Comma separated list of values defined by a schema. See Option details section below.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help
Option details:
Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value):
--subscriptions "id=<string>\,quantity=<numeric>, ... "2.2.3. hammer activation-key content-override
製品コンテンツのデフォルトを上書きします。
Usage:
hammer activation-key content-override [OPTIONS]
Options:
--content-label CONTENT_LABEL Label of the content
--id ID ID of the activation key
--name NAME Activation key name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--override-name OVERRIDE_NAME Override parameter key or name.
To enable or disable a repo select 'enabled'.
Default value: enabled
Default: "enabled"
--remove Remove a content override
--value VALUE Override value. Note for repo enablement you can use a boolean value
-h, --help Print help2.2.4. hammer activation-key copy
アクティベーションキーをコピーします。
Usage:
hammer activation-key copy [OPTIONS]
Options:
--id ID ID of the activation key
--name NAME Activation key name to search by
--new-name NEW_NAME Name of new activation key
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.2.5. hammer activation-key create
アクティベーションキーを作成します。
Usage:
hammer activation-key create [OPTIONS]
Options:
--auto-attach AUTO_ATTACH Auto attach subscriptions upon registration
One of true/false, yes/no, 1/0.
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--description DESCRIPTION Description
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--max-hosts MAX_HOSTS Maximum number of registered content hosts
--name NAME Name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--purpose-addons PURPOSE_ADDONS Sets the system add-ons
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--purpose-role PURPOSE_ROLE Sets the system purpose usage
--purpose-usage PURPOSE_USAGE Sets the system purpose usage
--release-version RELEASE_VERSION Content release version
--service-level SERVICE_LEVEL Service level
--unlimited-hosts Set hosts max to unlimited
-h, --help Print help2.2.6. hammer activation-key delete
アクティベーションキーを破棄します。
Usage:
hammer activation-key delete [OPTIONS]
Options:
--id ID ID of the activation key
--name NAME Activation key name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.2.7. hammer activation-key host-collections
関連付けられているホストコレクションを一覧表示します。
Usage:
hammer activation-key host-collections [OPTIONS]
Options:
--available-for AVAILABLE_FOR Interpret specified object to return only Host Collections that can be
Associated with specified object. The value 'host' is supported.
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--host-id HOST_ID Filter products by host id
--id ID ID of activation key
--name NAME Name of activation key
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--sort-by SORT_BY Field to sort the results on
--sort-order SORT_ORDER How to order the sorted results (e.g. ASC for ascending)
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
ID | x | x | x
Name | x | x | x
-------|-----|---------|-----2.2.8. hammer activation-key info
アクティベーションキーを表示します。
Usage:
hammer activation-key info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID ID of the activation key
--name NAME Activation key name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
------------------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------------------------|-----|---------|-----
Name | x | x | x
ID | x | x | x
Description | x | x |
Host Limit | x | x |
Auto Attach | x | x |
Release Version | x | x |
Lifecycle Environment | x | x |
Content View | x | x |
Host Collections/ID | x | x |
Host Collections/Name | x | x |
System Purpose/Service Level | x | x |
System Purpose/Purpose Usage | x | x |
System Purpose/Purpose Role | x | x |
System Purpose/Purpose Addons | x | x |
------------------------------|-----|---------|-----2.2.9. hammer activation-key list
アクティベーションキーを一覧表示します。
Usage:
hammer activation-key list [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--name NAME Activation key name to filter by
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Search string
-h, --help Print help
Predefined field sets:
----------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
----------------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Host Limit | x | x |
Lifecycle Environment | x | x |
Content View | x | x |
----------------------|-----|---------|-----
Search / Order fields:
addon string
content_view string
content_view_id integer
description text
environment string
name string
organization_id integer
role string
subscription_id string
subscription_name string
usage string2.2.10. hammer activation-key product-content
関連付けられた製品を一覧表示します。
Usage:
hammer activation-key product-content [OPTIONS]
Options:
--content-access-mode-all CONTENT_ACCESS_MODE_ALL Get all content available, not just that provided by subscriptions
One of true/false, yes/no, 1/0.
--content-access-mode-env CONTENT_ACCESS_MODE_ENV Limit content to just that available in the activation key's content
View version
One of true/false, yes/no, 1/0.
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID ID of the activation key
--name NAME Activation key name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
-----------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-----------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Type | x | x |
URL | x | x |
GPG Key | x | x |
Label | x | x |
Default Enabled? | x | x |
Override | x | x |
-----------------|-----|---------|-----2.2.11. hammer activation-key remove-host-collection
リソースの関連付けを解除します。
Usage:
hammer activation-key remove-host-collection [OPTIONS]
Options:
--host-collection HOST_COLLECTION_NAME Host collection name to search by
--host-collection-id HOST_COLLECTION_ID Id of the host collection
--id ID ID of the activation key
--name NAME Activation key name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.2.12. hammer activation-key remove-subscription
サブスクリプションを削除します。
Usage:
hammer activation-key remove-subscription [OPTIONS]
Options:
--id ID ID of the activation key
--name NAME Activation key name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--subscription-id SUBSCRIPTION_ID ID of subscription
-h, --help Print help2.2.13. hammer activation-key subscriptions
関連付けられたサブスクリプションを一覧表示します。
Usage:
hammer activation-key subscriptions [OPTIONS]
Options:
--activation-key ACTIVATION_KEY_NAME Activation key name to search by
--activation-key-id ACTIVATION_KEY_ID ID of the activation key
--available-for AVAILABLE_FOR Object to show subscriptions available for, either 'host' or
'activation_key'
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--host HOST_NAME Host name
--host-id HOST_ID
--id ACTIVATION_KEY_ID ID of the activation key
--match-host MATCH_HOST Ignore subscriptions that are unavailable to the specified host
One of true/false, yes/no, 1/0.
--match-installed MATCH_INSTALLED Return subscriptions that match installed products of the specified host
One of true/false, yes/no, 1/0.
--name ACTIVATION_KEY_NAME Activation key name to search by
--no-overlap NO_OVERLAP Return subscriptions which do not overlap with a currently-attached
Subscription
One of true/false, yes/no, 1/0.
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Search string
-h, --help Print help
Predefined field sets:
-----------|-----|--------
FIELDS | ALL | DEFAULT
-----------|-----|--------
ID | x | x
Name | x | x
Attached | x | x
Quantity | x | x
Start Date | x | x
End Date | x | x
Support | x | x
Contract | x | x
Account | x | x
-----------|-----|--------2.2.14. hammer activation-key update
アクティベーションキーを更新します。
Usage:
hammer activation-key update [OPTIONS]
Options:
--auto-attach AUTO_ATTACH Auto attach subscriptions upon registration
One of true/false, yes/no, 1/0.
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--description DESCRIPTION Description
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--id ID ID of the activation key
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--max-hosts MAX_HOSTS Maximum number of registered content hosts
--name NAME Activation key name to search by
--new-name NEW_NAME Name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--purpose-addons PURPOSE_ADDONS Sets the system add-ons
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--purpose-role PURPOSE_ROLE Sets the system purpose usage
--purpose-usage PURPOSE_USAGE Sets the system purpose usage
--release-version RELEASE_VERSION Content release version
--service-level SERVICE_LEVEL Service level
--unlimited-hosts Set hosts max to unlimited
-h, --help Print help2.3. hammer admin
サーバー側の管理タスクです。
Usage:
hammer admin [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
logging Logging verbosity level setup
Options:
-h, --help Print help2.3.1. hammer admin logging
ロギングの詳細レベルを設定します。
Usage:
hammer admin logging [OPTIONS]
Options:
--no-backup Skip configuration backups creation.
--prefix PATH Operate on prefixed environment (e.g. chroot).
-a, --all Apply to all components.
-c, --components COMPONENTS Components to apply, use --list to get them.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-d, --level-debug Increase verbosity level to debug.
-h, --help Print help
-l, --list List available components.
-n, --dry-run Do not apply specified changes.
-p, --level-production Decrease verbosity level to standard.2.4. hammer ansible
foreman ansible を管理します。
Usage:
hammer ansible [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
roles Manage ansible roles
variables Manage ansible variables
Options:
-h, --help Print help2.4.1. hammer ansible roles
Ansible ロールを管理します。
Usage:
hammer ansible roles [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
delete Deletes Ansible role
fetch Fetch Ansible roles available to be imported
import Import Ansible roles
info Show role
list List Ansible roles
obsolete Obsolete Ansible roles
play-hostgroups Runs all Ansible roles on hostgroups
play-hosts Runs all Ansible roles on hosts
Options:
-h, --help Print help2.4.1.1. hammer ansible roles delete
Ansible ロールを削除します。
Usage:
hammer ansible roles delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.4.1.2. hammer ansible roles fetch
インポート可能な Ansible ロールを取得します。
Usage:
hammer ansible roles fetch [OPTIONS]
Options:
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--proxy-id PROXY_ID Capsule to fetch from
-h, --help Print help2.4.1.3. hammer ansible roles import
Ansible ロールをインポートします。
Usage:
hammer ansible roles import [OPTIONS]
Options:
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--proxy-id PROXY_ID Capsule to import from
--role-names ROLE_NAMES Ansible role names to import
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.4.1.4. hammer ansible roles info
ロールを表示します。
Usage:
hammer ansible roles info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Imported at | x | x |
------------|-----|---------|-----2.4.1.5. hammer ansible roles list
Ansible ロールを一覧表示します。
Usage:
hammer ansible roles list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Imported at | x | x |
------------|-----|---------|-----
Search / Order fields:
host string
host_id integer
hostgroup string
hostgroup_id integer
id integer
name string
updated_at datetime2.4.1.6. hammer ansible roles obsolete
Ansible ロールを使用停止します。
Usage:
hammer ansible roles obsolete [OPTIONS]
Options:
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--proxy-id PROXY_ID Capsule to import from
-h, --help Print help2.4.1.7. hammer ansible roles play-hostgroups
ホストグループに対して Ansible ロールを実行します。
Usage:
hammer ansible roles play-hostgroups [OPTIONS]
Options:
--hostgroup-ids HOSTGROUP_IDS IDs of hostgroups to play roles on
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--hostgroup-titles HOSTGROUP_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--hostgroups HOSTGROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.4.1.8. hammer ansible roles play-hosts
ホストに対して Ansible ロールを実行します。
Usage:
hammer ansible roles play-hosts [OPTIONS]
Options:
--host-ids HOST_IDS IDs of hosts to play roles on
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.4.2. hammer ansible variables
Ansible 変数を管理します。
Usage:
hammer ansible variables [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
add-matcher Create an override value for a specific ansible variable
create Create Ansible variable
delete Deletes Ansible variable
import Import Ansible variables. This will only import variables for already existing roles, it will not import any new roles
info Show variable
list List Ansible variables
obsolete Obsolete Ansible variables. This will only obsolete variables for already existing roles, it will not delete any old roles
remove-matcher Destroy an override value
update Updates Ansible variable
Options:
-h, --help Print help2.4.2.1. hammer ansible variables add-matcher
特定の Ansible 変数のオーバーライド値を作成します。
Usage:
hammer ansible variables add-matcher [OPTIONS]
Options:
--ansible-variable ANSIBLE_VARIABLE_NAME Name to search by
--ansible-variable-id ANSIBLE_VARIABLE_ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--match MATCH Override match
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--value VALUE Override value, required if omit is false
-h, --help Print help2.4.2.2. hammer ansible variables create
Ansible 変数を作成します。
Usage:
hammer ansible variables create [OPTIONS]
Options:
--ansible-role ANSIBLE_ROLE_NAME Name to search by
--ansible-role-id ANSIBLE_ROLE_ID
--avoid-duplicates AVOID_DUPLICATES Remove duplicate values (only array type)
One of true/false, yes/no, 1/0.
--default-value DEFAULT_VALUE Default value of variable
--description DESCRIPTION Description of variable
--hidden-value HIDDEN_VALUE When enabled the parameter is hidden in the UI
One of true/false, yes/no, 1/0.
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--merge-default MERGE_DEFAULT Include default value when merging all matching values
One of true/false, yes/no, 1/0.
--merge-overrides MERGE_OVERRIDES Merge all matching values (only array/hash type)
One of true/false, yes/no, 1/0.
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--override OVERRIDE Whether to override variable or not
One of true/false, yes/no, 1/0.
--override-value-order OVERRIDE_VALUE_ORDER The order in which values are resolved
--validator-rule VALIDATOR_RULE Used to enforce certain values for the parameter values
--validator-type VALIDATOR_TYPE Types of validation values
Possible value(s): 'regexp', 'list'
--variable VARIABLE Name of variable
--variable-type VARIABLE_TYPE Types of variable values
Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
-h, --help Print help2.4.2.3. hammer ansible variables delete
Ansible 変数を削除します。
Usage:
hammer ansible variables delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.4.2.4. hammer ansible variables import
Ansible 変数をインポートします。既存のロールの変数のみをインポートし、新規ロールはインポートしません。
Usage:
hammer ansible variables import [OPTIONS]
Options:
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--proxy-id PROXY_ID Capsule to import from
-h, --help Print help2.4.2.5. hammer ansible variables info
変数を表示します。
Usage:
hammer ansible variables info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
------------------------------------|-----|--------
FIELDS | ALL | DEFAULT
------------------------------------|-----|--------
Id | x | x
Variable | x | x
Default Value | x | x
Type | x | x
Role | x | x
Role Id | x | x
Description | x | x
Hidden Value? | x | x
Validator/Type | x | x
Validator/Rule | x | x
Override values/Override | x | x
Override values/Merge overrides | x | x
Override values/Merge default value | x | x
Override values/Avoid duplicates | x | x
Override values/Order | x | x
Override values/Values/Id | x | x
Override values/Values/Match | x | x
Override values/Values/Value | x | x
Created at | x | x
Updated at | x | x
------------------------------------|-----|--------2.4.2.6. hammer ansible variables list
Ansible 変数を一覧表示します。
Usage:
hammer ansible variables list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
--------------|-----|--------
FIELDS | ALL | DEFAULT
--------------|-----|--------
Id | x | x
Variable | x | x
Default Value | x | x
Type | x | x
Role | x | x
Role Id | x | x
--------------|-----|--------
Search / Order fields:
ansible_role string
avoid_duplicates Values: true, false
imported Values: true, false
key string
merge_default Values: true, false
merge_overrides Values: true, false
name string
override Values: true, false
parameter string2.4.2.7. hammer ansible variables obsolete
Ansible 変数が使用されなようにします。既存のロールの変数のみを使用されないようにするだけで、古くなったロールを削除するわけではありません。
Usage:
hammer ansible variables obsolete [OPTIONS]
Options:
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--proxy-id PROXY_ID Capsule to import from
-h, --help Print help2.4.2.8. hammer ansible variables remove-matcher
オーバーライド値を破棄します。
Usage:
hammer ansible variables remove-matcher [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.4.2.9. hammer ansible variables update
Ansible 変数を更新します。
Usage:
hammer ansible variables update [OPTIONS]
Options:
--ansible-role ANSIBLE_ROLE_NAME Name to search by
--ansible-role-id ANSIBLE_ROLE_ID
--avoid-duplicates AVOID_DUPLICATES Remove duplicate values (only array type)
One of true/false, yes/no, 1/0.
--default-value DEFAULT_VALUE Default value of variable
--description DESCRIPTION Description of variable
--hidden-value HIDDEN_VALUE When enabled the parameter is hidden in the UI
One of true/false, yes/no, 1/0.
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--merge-default MERGE_DEFAULT Include default value when merging all matching values
One of true/false, yes/no, 1/0.
--merge-overrides MERGE_OVERRIDES Merge all matching values (only array/hash type)
One of true/false, yes/no, 1/0.
--name NAME Name to search by
--new-name NEW_NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--override OVERRIDE Whether to override variable or not
One of true/false, yes/no, 1/0.
--override-value-order OVERRIDE_VALUE_ORDER The order in which values are resolved
--validator-rule VALIDATOR_RULE Used to enforce certain values for the parameter values
--validator-type VALIDATOR_TYPE Types of validation values
Possible value(s): 'regexp', 'list'
--variable VARIABLE Name of variable
--variable-type VARIABLE_TYPE Types of variable values
Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
-h, --help Print help2.5. hammer architecture
アーキテクチャーを操作します。
Usage:
hammer architecture [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
add-operatingsystem Associate an operating system
create Create an architecture
delete Delete an architecture
info Show an architecture
list List all architectures
remove-operatingsystem Disassociate an operating system
update Update an architecture
Options:
-h, --help Print help2.5.1. hammer architecture add-operatingsystem
オペレーティングシステムを関連付けます。
Usage:
hammer architecture add-operatingsystem [OPTIONS]
Options:
--id ID
--name NAME Architecture name
--operatingsystem OPERATINGSYSTEM_TITLE Operating system title
--operatingsystem-id OPERATINGSYSTEM_ID
-h, --help Print help2.5.2. hammer architecture create
アーキテクチャーを作成します。
Usage:
hammer architecture create [OPTIONS]
Options:
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME
--operatingsystem-ids OPERATINGSYSTEM_IDS Operating system IDs
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.5.3. hammer architecture delete
アーキテクチャーを削除します。
Usage:
hammer architecture delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Architecture name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.5.4. hammer architecture info
アーキテクチャーを表示します。
Usage:
hammer architecture info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Architecture name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Operating systems/ | x | x |
Locations/ | x | x |
Organizations/ | x | x |
Created at | x | x |
Updated at | x | x |
-------------------|-----|---------|-----2.5.5. hammer architecture list
アーキテクチャーの一覧を表示します。
Usage:
hammer architecture list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--operatingsystem OPERATINGSYSTEM_TITLE Operating system title
--operatingsystem-id OPERATINGSYSTEM_ID
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----
Search / Order fields:
name string2.5.6. hammer architecture remove-operatingsystem
オペレーティングシステムの関連付けを解除します。
Usage:
hammer architecture remove-operatingsystem [OPTIONS]
Options:
--id ID
--name NAME Architecture name
--operatingsystem OPERATINGSYSTEM_TITLE Operating system title
--operatingsystem-id OPERATINGSYSTEM_ID
-h, --help Print help2.5.7. hammer architecture update
アーキテクチャーを更新します。
Usage:
hammer architecture update [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Architecture name
--new-name NEW_NAME
--operatingsystem-ids OPERATINGSYSTEM_IDS Operating system IDs
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--operatingsystems OPERATINGSYSTEM_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.6. hammer arf-report
コンプライアンスレポートを操作します。
Usage:
hammer arf-report [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
delete Delete an ARF Report
download Download bzipped ARF report
download-html Download ARF report in HTML
info Show an ARF report
list List ARF reports
Options:
-h, --help Print help2.6.1. hammer arf-report delete
ARF レポートを削除します。
Usage:
hammer arf-report delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Name to search by
--location-id LOCATION_ID
--organization ORGANIZATION_NAME Name to search by
--organization-id ORGANIZATION_ID Organization ID
-h, --help Print help2.6.2. hammer arf-report download
bzip された ARF レポートをダウンロードします。
Usage:
hammer arf-report download [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Name to search by
--location-id LOCATION_ID
--organization ORGANIZATION_NAME Name to search by
--organization-id ORGANIZATION_ID Organization ID
--path PATH Path to directory where downloaded file will be saved
-h, --help Print help2.6.3. hammer arf-report download-html
HTML 形式で ARF レポートをダウンロードします。
Usage:
hammer arf-report download-html [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Name to search by
--location-id LOCATION_ID
--organization ORGANIZATION_NAME Name to search by
--organization-id ORGANIZATION_ID Organization ID
--path PATH Path to directory where downloaded file will be saved
-h, --help Print help2.6.4. hammer arf-report info
ARF レポートを表示します。
Usage:
hammer arf-report info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Name to search by
--location-id LOCATION_ID
--organization ORGANIZATION_NAME Name to search by
--organization-id ORGANIZATION_ID Organization ID
-h, --help Print help
Predefined field sets:
--------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
--------------------|-----|---------|-----
Id | x | x | x
Reported at | x | x |
Host name | x | x | x
OpenSCAP proxy name | x | x |
Policy name | x | x |
Passed | x | x |
Failed | x | x |
Othered | x | x |
Host Id | x | x |
OpenSCAP proxy Id | x | x |
Policy Id | x | x |
Locations/ | x | x |
Organizations/ | x | x |
--------------------|-----|---------|-----2.6.5. hammer arf-report list
ARF レポートを一覧表示します。
Usage:
hammer arf-report list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
--------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
--------------------|-----|---------|-----
Id | x | x | x
Reported at | x | x |
Host name | x | x | x
OpenSCAP proxy name | x | x |
Policy name | x | x |
Passed | x | x |
Failed | x | x |
Othered | x | x |
--------------------|-----|---------|-----
Search / Order fields:
compliance_policy string
compliance_status Values: compliant, incompliant, inconclusive
comply_with string
environment string
eventful Values: true, false
host string
host_collection string
host_id integer
hostgroup string
hostgroup_fullname string
hostgroup_title string
inconclusive_with string
last_for Values: host, policy
last_report datetime
lifecycle_environment string
location string
location_id integer
log text
not_comply_with string
openscap_proxy string
organization string
organization_id integer
origin string
policy string
reported datetime
resource text
xccdf_rule_failed string
xccdf_rule_name text
xccdf_rule_othered string
xccdf_rule_passed string2.7. hammer audit
監査証跡を検索します。
Usage:
hammer audit [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
info Show an audit
list List all audits
Options:
-h, --help Print help2.7.1. hammer audit info
監査を表示します。
Usage:
hammer audit info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
--------------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
--------------------------|-----|---------|-----
Id | x | x | x
At | x | x |
IP | x | x |
User | x | x |
Action | x | x |
Audit type | x | x |
Audit record | x | x |
Audited changes/Attribute | x | x |
Audited changes/Value | x | x |
Audited changes/Old | x | x |
Audited changes/New | x | x |
--------------------------|-----|---------|-----2.7.2. hammer audit list
すべての監査を一覧表示します。
Usage:
hammer audit list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------------|-----|---------|-----
Id | x | x | x
At | x | x |
IP | x | x |
User | x | x |
Action | x | x |
Audit type | x | x |
Audit record | x | x |
-------------|-----|---------|-----
Search / Order fields:
action Values: create, update, delete
auditable_id integer
changes text
comment string
host string
hostgroup string
hostgroup_title string
id integer
interface_fqdn string
interface_ip string
interface_mac string
location string
location_id integer
organization string
organization_id integer
os string
os_title string
parameter string
partition_table string
provisioning_template string
puppetclass string
remote_address string
setting string
time datetime
type Values: role, ptable, provisioning_template, user, filter, subnet, hostgroup, smart_proxy, katello/host/content_facet, katello/host/subscription_facet, remote_execution_feature, usergroup, katello/content_view, katello/kt_environment, realm, job_template, bookmark, lookup_value, model, domain, environment, architecture, image, ansible_role, hostgroup_class, puppetclass, medium, http_proxy, auth_source, compute_resource, host, interface, location, organization, os, override_value, parameter, partition_table, setting, smart_class_parameter, smart_variable
user string
username string2.8. hammer auth
Foreman 接続をログイン/ログアウトします。
Usage:
hammer auth [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
login Set credentials
logout Wipe your credentials
status Information about current connections
Options:
-h, --help Print help2.8.1. hammer auth login
資格情報を設定します。
Usage:
hammer auth login [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
basic Provide username and password
oauth Supports for both with/without 2fa
Options:
-h, --help Print help2.8.1.1. hammer auth login basic
ユーザー名とパスワードを指定します。
Usage:
hammer auth login basic [OPTIONS]
Options:
-h, --help Print help
-p, --password PASSWORD Password to access the remote system
-u, --username USERNAME Username to access the remote system2.8.1.2. hammer auth login oauth
2fa ある場合、ない場合の両方をサポートします。
Usage:
hammer auth login oauth [OPTIONS]
Options:
-a, --oidc-authorization-endpoint OPENIDC-AUTHORIZATION-ENDPOINT Openidc provider URL which issues authentication code (two factor only)
-c, --oidc-client-id OPENIDC-CLIENT-ID Client id used in the Openidc provider
-f, --two-factor Authenticate with two factor
-h, --help Print help
-p, --password PASSWORD Password to access the remote system
-r, --oidc-redirect-uri OPENIDC-REDIRECT-URI Redirect URI for the authentication code grant flow
-t, --oidc-token-endpoint OPENIDC-TOKEN-ENDPOINT Openidc provider URL which issues access token
-u, --username USERNAME Username to access the remote system2.8.2. hammer auth logout
資格情報を消去します。
Usage:
hammer auth logout [OPTIONS]
Options:
-h, --help Print help2.8.3. hammer auth status
現在の接続に関する情報
Usage:
hammer auth status [OPTIONS]
Options:
-h, --help Print help2.9. hammer auth-source
認証ソースを操作します。
Usage:
hammer auth-source [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
external Manage external auth sources
ldap Manage LDAP auth sources
list List all auth sources
Options:
-h, --help Print help2.9.1. hammer auth-source external
外部認証ソースを管理します。
Usage:
hammer auth-source external [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
info Show an external authentication source
list List external authentication sources
update Update organization and location for Auth Source
Options:
-h, --help Print help2.9.1.1. hammer auth-source external info
外部認証ソースを表示します。
Usage:
hammer auth-source external info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
---------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Locations/ | x | x |
Organizations/ | x | x |
---------------|-----|---------|-----2.9.1.2. hammer auth-source external list
外部認証ソースを一覧表示します。
Usage:
hammer auth-source external list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----2.9.1.3. hammer auth-source external update
認証ソースの組織と場所を更新します。
Usage:
hammer auth-source external update [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME Name to search by
--new-name NEW_NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.9.2. hammer auth-source ldap
LDAP 認証ソースを管理します。
Usage:
hammer auth-source ldap [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
create Create an LDAP authentication source
delete Delete an LDAP authentication source
info Show an LDAP authentication source
list List all LDAP authentication sources
update Update an LDAP authentication source
Options:
-h, --help Print help2.9.2.1. hammer auth-source ldap create
LDAP 認証ソースを作成します。
Usage:
hammer auth-source ldap create [OPTIONS]
Options:
--account ACCOUNT
--account-password ACCOUNT_PASSWORD Required if onthefly_register is true
--attr-firstname ATTR_FIRSTNAME Required if onthefly_register is true
--attr-lastname ATTR_LASTNAME Required if onthefly_register is true
--attr-login ATTR_LOGIN Required if onthefly_register is true
--attr-mail ATTR_MAIL Required if onthefly_register is true
--attr-photo ATTR_PHOTO
--base-dn BASE_DN
--groups-base GROUPS_BASE Groups base DN
--host HOST
--ldap-filter LDAP_FILTER LDAP filter
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME
--onthefly-register ONTHEFLY_REGISTER One of true/false, yes/no, 1/0.
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--port PORT Defaults to 389
--server-type SERVER_TYPE Type of the LDAP server
Possible value(s): 'free_ipa', 'active_directory', 'posix'
--tls TLS One of true/false, yes/no, 1/0.
--use-netgroups USE_NETGROUPS Use NIS netgroups instead of posix groups, applicable only when server_type
Is posix or free_ipa
One of true/false, yes/no, 1/0.
--usergroup-sync USERGROUP_SYNC Sync external user groups on login
One of true/false, yes/no, 1/0.
-h, --help Print help2.9.2.2. hammer auth-source ldap delete
LDAP 認証ソースを削除します。
Usage:
hammer auth-source ldap delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.9.2.3. hammer auth-source ldap info
LDAP 認証ソースを表示します。
Usage:
hammer auth-source ldap info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------------------------------------------|-----|--------
FIELDS | ALL | DEFAULT
-------------------------------------------|-----|--------
Server/Id | x | x
Server/Name | x | x
Server/Server | x | x
Server/LDAPS | x | x
Server/Port | x | x
Server/Server Type | x | x
Account/Account Username | x | x
Account/Base DN | x | x
Account/Groups base DN | x | x
Account/Use Netgroups | x | x
Account/LDAP filter | x | x
Account/Automatically Create Accounts? | x | x
Account/Usergroup sync | x | x
Attribute mappings/Login Name Attribute | x | x
Attribute mappings/First Name Attribute | x | x
Attribute mappings/Last Name Attribute | x | x
Attribute mappings/Email Address Attribute | x | x
Attribute mappings/Photo Attribute | x | x
Locations/ | x | x
Organizations/ | x | x
-------------------------------------------|-----|--------2.9.2.4. hammer auth-source ldap list
LDAP 認証ソースの一覧を表示します。
Usage:
hammer auth-source ldap list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Server | x | x |
Port | x | x |
LDAPS? | x | x |
-------|-----|---------|-----
Search / Order fields:
location string
location_id integer
name string
organization string
organization_id integer2.9.2.5. hammer auth-source ldap update
LDAP 認証ソースを更新します。
Usage:
hammer auth-source ldap update [OPTIONS]
Options:
--account ACCOUNT
--account-password ACCOUNT_PASSWORD Required if onthefly_register is true
--attr-firstname ATTR_FIRSTNAME Required if onthefly_register is true
--attr-lastname ATTR_LASTNAME Required if onthefly_register is true
--attr-login ATTR_LOGIN Required if onthefly_register is true
--attr-mail ATTR_MAIL Required if onthefly_register is true
--attr-photo ATTR_PHOTO
--base-dn BASE_DN
--groups-base GROUPS_BASE Groups base DN
--host HOST
--id ID
--ldap-filter LDAP_FILTER LDAP filter
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME Name to search by
--new-name NEW_NAME
--onthefly-register ONTHEFLY_REGISTER One of true/false, yes/no, 1/0.
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--port PORT Defaults to 389
--server-type SERVER_TYPE Type of the LDAP server
Possible value(s): 'free_ipa', 'active_directory', 'posix'
--tls TLS One of true/false, yes/no, 1/0.
--use-netgroups USE_NETGROUPS Use NIS netgroups instead of posix groups, applicable only when server_type
Is posix or free_ipa
One of true/false, yes/no, 1/0.
--usergroup-sync USERGROUP_SYNC Sync external user groups on login
One of true/false, yes/no, 1/0.
-h, --help Print help2.9.3. hammer auth-source list
すべての認証ソースを一覧表示します。
Usage:
hammer auth-source list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
--------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
--------------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Type of auth source | x | x |
--------------------|-----|---------|-----2.10. hammer bootdisk
ブートディスクをダウンロードします。
Usage:
hammer bootdisk [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
generic Download generic image
host Download host image
subnet Download subnet generic image
Options:
-h, --help Print help2.10.1. hammer bootdisk generic
汎用イメージをダウンロードします。
Usage:
hammer bootdisk generic [OPTIONS]
Options:
--file PATH File or device to write image to
--force Force writing to existing destination (device etc.)
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--sudo Use sudo to write to device
-h, --help Print help2.10.2. hammer bootdisk host
ホストイメージをダウンロードします。
Usage:
hammer bootdisk host [OPTIONS]
Options:
--file PATH File or device to write image to
--force Force writing to existing destination (device etc.)
--full FULL True for full, false for basic reusable image
One of true/false, yes/no, 1/0.
--host HOST_NAME Host name
--host-id HOST_ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--sudo Use sudo to write to device
-h, --help Print help2.10.3. hammer bootdisk subnet
サブネット汎用イメージをダウンロードします。
Usage:
hammer bootdisk subnet [OPTIONS]
Options:
--file PATH File or device to write image to
--force Force writing to existing destination (device etc.)
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--subnet SUBNET_NAME Subnet name
--subnet-id SUBNET_ID
--sudo Use sudo to write to device
-h, --help Print help2.11. hammer capsule
Capsule を操作します。
Usage:
hammer capsule [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
content Manage the capsule content
create Create a capsule
delete Delete a capsule
import-classes Import puppet classes from puppet Capsule
info Show a capsule
list List all capsules
refresh-features Refresh capsule features
update Update a capsule
Options:
-h, --help Print help2.11.1. hammer capsule content
Capsule コンテンツを管理します。
Usage:
hammer capsule content [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
add-lifecycle-environment Add lifecycle environments to the capsule
available-lifecycle-environments List the lifecycle environments not attached to the capsule
cancel-synchronization Cancel running capsule synchronization
info Get current capsule synchronization status
lifecycle-environments List the lifecycle environments attached to the capsule
remove-lifecycle-environment Remove lifecycle environments from the capsule
synchronization-status Get current capsule synchronization status
synchronize Synchronize the content to the capsule
Options:
-h, --help Print help2.11.1.1. hammer capsule content add-lifecycle-environment
ライフサイクル環境を Capsule に追加します。
Usage:
hammer capsule content add-lifecycle-environment [OPTIONS]
Options:
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--id ID Id of the capsule
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--name NAME Name to search by
--organization NAME Organization name
--organization-id ID Organization ID
-h, --help Print help2.11.1.2. hammer capsule content available-lifecycle-environments
Capsule に割り当てられていないライフサイクル環境を一覧表示します。
Usage:
hammer capsule content available-lifecycle-environments [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Id of the capsule
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
-------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Organization | x | x |
-------------|-----|---------|-----2.11.1.3. hammer capsule content cancel-synchronization
実行中の Capsule 同期をキャンセルします。
Usage:
hammer capsule content cancel-synchronization [OPTIONS]
Options:
--id ID Id of the capsule
--name NAME Name to search by
-h, --help Print help2.11.1.4. hammer capsule content info
現在の Capsule 同期ステータスを取得します。
Usage:
hammer capsule content info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Id of the capsule
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
-------------------------------------------------------------------|-----|--------
FIELDS | ALL | DEFAULT
-------------------------------------------------------------------|-----|--------
Lifecycle Environments/Name | x | x
Lifecycle Environments/Organization | x | x
Lifecycle Environments/Content Views/Name | x | x
Lifecycle Environments/Content Views/Composite | x | x
Lifecycle Environments/Content Views/Last Published | x | x
Lifecycle Environments/Content Views/Content/Hosts | x | x
Lifecycle Environments/Content Views/Content/Products | x | x
Lifecycle Environments/Content Views/Content/Yum repos | x | x
Lifecycle Environments/Content Views/Content/Container Image repos | x | x
Lifecycle Environments/Content Views/Content/Packages | x | x
Lifecycle Environments/Content Views/Content/Package groups | x | x
Lifecycle Environments/Content Views/Content/Errata | x | x
Lifecycle Environments/Content Views/Content/Puppet modules | x | x
-------------------------------------------------------------------|-----|--------2.11.1.5. hammer capsule content lifecycle-environments
Capsule に割り当てられたライフサイクル環境を一覧表示します。
Usage:
hammer capsule content lifecycle-environments [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Id of the capsule
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
-------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Organization | x | x |
-------------|-----|---------|-----2.11.1.6. hammer capsule content remove-lifecycle-environment
ライフサイクル環境を Capsule から削除します。
Usage:
hammer capsule content remove-lifecycle-environment [OPTIONS]
Options:
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--id ID Id of the capsule
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--name NAME Name to search by
--organization NAME Organization name
--organization-id ID Organization ID
-h, --help Print help2.11.1.7. hammer capsule content synchronization-status
現在の Capsule 同期ステータスを取得します。
Usage:
hammer capsule content synchronization-status [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Id of the capsule
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
--------------------------------------|-----|--------
FIELDS | ALL | DEFAULT
--------------------------------------|-----|--------
Last sync | x | x
Status | x | x
Currently running sync tasks/Task id | x | x
Currently running sync tasks/Progress | x | x
Last failure/Task id | x | x
Last failure/Messages | x | x
--------------------------------------|-----|--------2.11.1.8. hammer capsule content synchronize
コンテンツと Capsule を同期します。
Usage:
hammer capsule content synchronize [OPTIONS]
Options:
--async Do not wait for the task
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--id ID Id of the capsule
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--name NAME Name to search by
--organization NAME Organization name
--organization-id ID Organization ID
--skip-metadata-check SKIP_METADATA_CHECK Skip metadata check on each repository on the capsule
One of true/false, yes/no, 1/0.
-h, --help Print help2.11.2. hammer capsule create
Capsule を作成します。
Usage:
hammer capsule create [OPTIONS]
Options:
--download-policy DOWNLOAD_POLICY Download Policy of the capsule, must be one of immediate, on_demand,
Background, inherit
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--url URL
-h, --help Print help2.11.3. hammer capsule delete
Capsule を削除します。
Usage:
hammer capsule delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.11.4. hammer capsule import-classes
Puppet Capsule から puppet クラスをインポートします。
Usage:
hammer capsule import-classes [OPTIONS]
Options:
--dryrun Do not run the import
--environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment-id instead)
--except EXCEPT Optional comma-delimited string containing either 'new',
'updated', or 'obsolete' that is used to limit the imported
Puppet classes
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name
--puppet-environment-id PUPPET_ENVIRONMENT_ID
-h, --help Print help2.11.5. hammer capsule info
Capsule を表示します。
Usage:
hammer capsule info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
---------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
URL | x | x |
Features | x | x |
Features/ | x | x |
Locations/ | x | x |
Organizations/ | x | x |
Created at | x | x |
Updated at | x | x |
---------------|-----|---------|-----2.11.6. hammer capsule list
Capsule を一覧表示します。
Usage:
hammer capsule list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
---------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------|-----|---------|-----
Id | x | x | x
Name | x | x | x
URL | x | x |
Features | x | x |
---------|-----|---------|-----
Search / Order fields:
feature string
location string
location_id integer
name string
organization string
organization_id integer
url string2.11.7. hammer capsule refresh-features
Capsule 機能をリフレッシュします。
Usage:
hammer capsule refresh-features [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.11.8. hammer capsule update
Capsule を更新します。
Usage:
hammer capsule update [OPTIONS]
Options:
--download-policy DOWNLOAD_POLICY Download Policy of the capsule, must be one of immediate, on_demand,
Background, inherit
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME Name to search by
--new-name NEW_NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--url URL
-h, --help Print help2.12. hammer compute-profile
コンピュートプロファイルを操作します。
Usage:
hammer compute-profile [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
create Create a compute profile
delete Delete a compute profile
info Show a compute profile
list List of compute profiles
update Update a compute profile
values Create update and delete Compute profile values
Options:
-h, --help Print help2.12.1. hammer compute-profile create
コンピュートプロファイルを作成します。
Usage:
hammer compute-profile create [OPTIONS]
Options:
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.12.2. hammer compute-profile delete
コンピュートプロファイルを削除します。
Usage:
hammer compute-profile delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute profile name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.12.3. hammer compute-profile info
コンピュートプロファイルを表示します。
Usage:
hammer compute-profile info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute profile name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
------------------------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------------------------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Locations/ | x | x |
Organizations/ | x | x |
Created at | x | x |
Updated at | x | x |
Compute attributes/Id | x | x |
Compute attributes/Name | x | x |
Compute attributes/Compute Resource | x | x |
Compute attributes/VM attributes | x | x |
------------------------------------|-----|---------|-----2.12.4. hammer compute-profile list
コンピュートプロファイルを一覧表示します。
Usage:
hammer compute-profile list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----
Search / Order fields:
name string2.12.5. hammer compute-profile update
コンピュートプロファイルを更新します。
Usage:
hammer compute-profile update [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute profile name
--new-name NEW_NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.12.6. hammer compute-profile values
コンピュートプロファイルの値を作成、更新、削除します。
Usage:
hammer compute-profile values [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
add-interface Add interface for Compute Profile
add-volume Add volume for Compute Profile
create Create compute profile set of values
remove-interface Remove compute profile interface
remove-volume Remove compute profile volume
update Update compute profile values
update-interface Update compute profile interface
update-volume Update compute profile volume
Options:
-h, --help Print help2.12.6.1. hammer compute-profile values add-interface
コンピュートプロファイルのインターフェースを追加します。
Usage:
hammer compute-profile values add-interface [OPTIONS]
Options:
--compute-profile COMPUTE_PROFILE_NAME Compute profile name
--compute-profile-id COMPUTE_PROFILE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--interface SET_VALUES Interface parameters, should be comma separated list of values
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Provider specific options:
NOTE: Bold attributes are required.
EC2:
--interface:
GCE:
--interface:
Libvirt:
--interface:
compute_type Possible values: bridge, network
compute_bridge Name of interface according to type
compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000
compute_network
Libvirt instance network, e.g. default
OpenStack:
--interface:
oVirt:
--interface:
compute_name Compute name, e.g. eth0
compute_network Select one of available networks for a cluster, must be an ID
compute_interface Interface type
Rackspace:
--interface:
VMware:
--interface:
compute_type Type of the network adapter, for example one of:
VirtualVmxnet3
VirtualE1000
See documentation center for your version of vSphere to find more details about available adapter types:
https://www.vmware.com/support/pubs/
compute_network Network ID from VMware
AzureRM:
--interface:
compute_network Select one of available Azure Subnets, must be an ID
compute_public_ip Public IP (None, Static, Dynamic)
compute_private_ip Static Private IP (expressed as true or false)2.12.6.2. hammer compute-profile values add-volume
コンピュートプロファイルのボリュームを追加します。
Usage:
hammer compute-profile values add-volume [OPTIONS]
Options:
--compute-profile COMPUTE_PROFILE_NAME Compute profile name
--compute-profile-id COMPUTE_PROFILE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--volume VOLUME Volume parameters, should be comma separated list of values
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help
Provider specific options:
NOTE: Bold attributes are required.
EC2:
--volume:
GCE:
--volume:
size_gb Volume size in GB, integer value
Libvirt:
--volume:
pool_name One of available storage pools
capacity String value, e.g. 10G
allocation
Initial allocation, e.g. 0G
format_type Possible values: raw, qcow2
OpenStack:
--volume:
oVirt:
--volume:
size_gb Volume size in GB, integer value
storage_domain ID or name of storage domain
bootable Boolean, set 1 for bootable, only one volume can be bootable
preallocate Boolean, set 1 to preallocate
wipe_after_delete Boolean, set 1 to wipe disk after delete
interface Disk interface name, must be ide, virto or virto_scsi
Rackspace:
--volume:
VMware:
--volume:
name
storage_pod Storage Pod ID from VMware
datastore Datastore ID from VMware
mode persistent/independent_persistent/independent_nonpersistent
size_gb Integer number, volume size in GB
thin true/false
eager_zero true/false
controller_key Associated SCSI controller key
AzureRM:
--volume:2.12.6.3. hammer compute-profile values create
コンピュートプロファイルの値セットを作成します。
Usage:
hammer compute-profile values create [OPTIONS]
Options:
--compute-attributes COMPUTE_ATTRS Compute resource attributes
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--compute-profile COMPUTE_PROFILE_NAME Compute profile name
--compute-profile-id COMPUTE_PROFILE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--interface INTERFACE Interface parameters, should be comma separated list of values
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
Can be specified multiple times.
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--volume VOLUME Volume parameters, should be comma separated list of values
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
Can be specified multiple times.
-h, --help Print help
Provider specific options:
NOTE: Bold attributes are required.
EC2:
--volume:
--interface:
--compute-attributes:
availability_zone
flavor_id
groups
security_group_ids
managed_ip
GCE:
--volume:
size_gb Volume size in GB, integer value
--interface:
--compute-attributes:
machine_type
network
associate_external_ip
Libvirt:
--volume:
pool_name One of available storage pools
capacity String value, e.g. 10G
allocation
Initial allocation, e.g. 0G
format_type Possible values: raw, qcow2
--interface:
compute_type Possible values: bridge, network
compute_bridge Name of interface according to type
compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000
compute_network
Libvirt instance network, e.g. default
--compute-attributes:
cpus Number of CPUs
memory String, amount of memory, value in bytes
cpu_mode Possible values: default, host-model, host-passthrough
OpenStack:
--volume:
--interface:
--compute-attributes:
availability_zone
boot_from_volume
flavor_ref
image_ref
tenant_id
security_groups
network
oVirt:
--volume:
size_gb Volume size in GB, integer value
storage_domain ID or name of storage domain
bootable Boolean, set 1 for bootable, only one volume can be bootable
preallocate Boolean, set 1 to preallocate
wipe_after_delete Boolean, set 1 to wipe disk after delete
interface Disk interface name, must be ide, virto or virto_scsi
--interface:
compute_name Compute name, e.g. eth0
compute_network Select one of available networks for a cluster, must be an ID
compute_interface Interface type
--compute-attributes:
cluster ID of cluster to use
template Hardware profile to use
cores Integer value, number of cores
sockets Integer value, number of sockets
memory Amount of memory, integer value in bytes
Rackspace:
--volume:
--interface:
--compute-attributes:
flavor_id
VMware:
--volume:
name
storage_pod Storage Pod ID from VMware
datastore Datastore ID from VMware
mode persistent/independent_persistent/independent_nonpersistent
size_gb Integer number, volume size in GB
thin true/false
eager_zero true/false
controller_key Associated SCSI controller key
--interface:
compute_type Type of the network adapter, for example one of:
VirtualVmxnet3
VirtualE1000
See documentation center for your version of vSphere to find more details about available adapter types:
https://www.vmware.com/support/pubs/
compute_network Network ID from VMware
--compute-attributes:
cluster Cluster ID from VMware
corespersocket Number of cores per socket (applicable to hardware versions < 10 only)
cpus CPU count
memory_mb Integer number, amount of memory in MB
path Path to folder
resource_pool Resource Pool ID from VMware
firmware automatic/bios/efi
guest_id Guest OS ID form VMware
hardware_version Hardware version ID from VMware
memoryHotAddEnabled Must be a 1 or 0, lets you add CPU resources while the machine is on
cpuHotAddEnabled Must be a 1 or 0, lets you add memory resources while the machine is on
add_cdrom Must be a 1 or 0, Add a CD-ROM drive to the virtual machine
annotation Annotation Notes
scsi_controllers List with SCSI controllers definitions
type - ID of the controller from VMware
key - Key of the controller (e.g. 1000)
AzureRM:
--volume:
--interface:
compute_network Select one of available Azure Subnets, must be an ID
compute_public_ip Public IP (None, Static, Dynamic)
compute_private_ip Static Private IP (expressed as true or false)
--compute-attributes:
resource_group Existing Azure Resource Group of user
vm_size VM Size, eg. Standard_A0 etc.
username The Admin username
password The Admin password
platform OS type eg. Linux
ssh_key_data SSH key for passwordless authentication
os_disk_caching OS disk caching
premium_os_disk Premium OS Disk, Boolean as 0 or 1
script_command Custom Script Command
script_uris Comma seperated file URIs2.12.6.4. hammer compute-profile values remove-interface
コンピュートプロファイルのインターフェースを削除します。
Usage:
hammer compute-profile values remove-interface [OPTIONS]
Options:
--compute-profile COMPUTE_PROFILE_NAME Compute profile name
--compute-profile-id COMPUTE_PROFILE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--interface-id INTERFACE ID Interface id
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.12.6.5. hammer compute-profile values remove-volume
コンピュートプロファイルのボリュームを削除します。
Usage:
hammer compute-profile values remove-volume [OPTIONS]
Options:
--compute-profile COMPUTE_PROFILE_NAME Compute profile name
--compute-profile-id COMPUTE_PROFILE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--volume-id VOLUME_ID Volume id
-h, --help Print help2.12.6.6. hammer compute-profile values update
コンピュートプロファイルの値を更新します。
Usage:
hammer compute-profile values update [OPTIONS]
Options:
--compute-attributes COMPUTE_ATTRS Compute resource attributes, should be comma separated list of values
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--compute-profile COMPUTE_PROFILE_NAME Compute profile name
--compute-profile-id COMPUTE_PROFILE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--interface INTERFACE Interface parameters, should be comma separated list of values
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
Can be specified multiple times.
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--volume VOLUME Volume parameters, should be comma separated list of values
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
Can be specified multiple times.
-h, --help Print help
Provider specific options:
NOTE: Bold attributes are required.
EC2:
--volume:
--interface:
--compute-attributes:
availability_zone
flavor_id
groups
security_group_ids
managed_ip
GCE:
--volume:
size_gb Volume size in GB, integer value
--interface:
--compute-attributes:
machine_type
network
associate_external_ip
Libvirt:
--volume:
pool_name One of available storage pools
capacity String value, e.g. 10G
allocation
Initial allocation, e.g. 0G
format_type Possible values: raw, qcow2
--interface:
compute_type Possible values: bridge, network
compute_bridge Name of interface according to type
compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000
compute_network
Libvirt instance network, e.g. default
--compute-attributes:
cpus Number of CPUs
memory String, amount of memory, value in bytes
cpu_mode Possible values: default, host-model, host-passthrough
OpenStack:
--volume:
--interface:
--compute-attributes:
availability_zone
boot_from_volume
flavor_ref
image_ref
tenant_id
security_groups
network
oVirt:
--volume:
size_gb Volume size in GB, integer value
storage_domain ID or name of storage domain
bootable Boolean, set 1 for bootable, only one volume can be bootable
preallocate Boolean, set 1 to preallocate
wipe_after_delete Boolean, set 1 to wipe disk after delete
interface Disk interface name, must be ide, virto or virto_scsi
--interface:
compute_name Compute name, e.g. eth0
compute_network Select one of available networks for a cluster, must be an ID
compute_interface Interface type
--compute-attributes:
cluster ID of cluster to use
template Hardware profile to use
cores Integer value, number of cores
sockets Integer value, number of sockets
memory Amount of memory, integer value in bytes
Rackspace:
--volume:
--interface:
--compute-attributes:
flavor_id
VMware:
--volume:
name
storage_pod Storage Pod ID from VMware
datastore Datastore ID from VMware
mode persistent/independent_persistent/independent_nonpersistent
size_gb Integer number, volume size in GB
thin true/false
eager_zero true/false
controller_key Associated SCSI controller key
--interface:
compute_type Type of the network adapter, for example one of:
VirtualVmxnet3
VirtualE1000
See documentation center for your version of vSphere to find more details about available adapter types:
https://www.vmware.com/support/pubs/
compute_network Network ID from VMware
--compute-attributes:
cluster Cluster ID from VMware
corespersocket Number of cores per socket (applicable to hardware versions < 10 only)
cpus CPU count
memory_mb Integer number, amount of memory in MB
path Path to folder
resource_pool Resource Pool ID from VMware
firmware automatic/bios/efi
guest_id Guest OS ID form VMware
hardware_version Hardware version ID from VMware
memoryHotAddEnabled Must be a 1 or 0, lets you add CPU resources while the machine is on
cpuHotAddEnabled Must be a 1 or 0, lets you add memory resources while the machine is on
add_cdrom Must be a 1 or 0, Add a CD-ROM drive to the virtual machine
annotation Annotation Notes
scsi_controllers List with SCSI controllers definitions
type - ID of the controller from VMware
key - Key of the controller (e.g. 1000)
AzureRM:
--volume:
--interface:
compute_network Select one of available Azure Subnets, must be an ID
compute_public_ip Public IP (None, Static, Dynamic)
compute_private_ip Static Private IP (expressed as true or false)
--compute-attributes:
resource_group Existing Azure Resource Group of user
vm_size VM Size, eg. Standard_A0 etc.
username The Admin username
password The Admin password
platform OS type eg. Linux
ssh_key_data SSH key for passwordless authentication
os_disk_caching OS disk caching
premium_os_disk Premium OS Disk, Boolean as 0 or 1
script_command Custom Script Command
script_uris Comma seperated file URIs2.12.6.7. hammer compute-profile values update-interface
コンピュートプロファイルのインターフェースを更新します。
Usage:
hammer compute-profile values update-interface [OPTIONS]
Options:
--compute-profile COMPUTE_PROFILE_NAME Compute profile name
--compute-profile-id COMPUTE_PROFILE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--interface SET_VALUES Interface parameters, should be comma separated list of values
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--interface-id INTERFACE_ID Interface id
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Provider specific options:
NOTE: Bold attributes are required.
EC2:
--interface:
GCE:
--interface:
Libvirt:
--interface:
compute_type Possible values: bridge, network
compute_bridge Name of interface according to type
compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000
compute_network
Libvirt instance network, e.g. default
OpenStack:
--interface:
oVirt:
--interface:
compute_name Compute name, e.g. eth0
compute_network Select one of available networks for a cluster, must be an ID
compute_interface Interface type
Rackspace:
--interface:
VMware:
--interface:
compute_type Type of the network adapter, for example one of:
VirtualVmxnet3
VirtualE1000
See documentation center for your version of vSphere to find more details about available adapter types:
https://www.vmware.com/support/pubs/
compute_network Network ID from VMware
AzureRM:
--interface:
compute_network Select one of available Azure Subnets, must be an ID
compute_public_ip Public IP (None, Static, Dynamic)
compute_private_ip Static Private IP (expressed as true or false)2.12.6.8. hammer compute-profile values update-volume
コンピュートプロファイルのボリュームを更新します。
Usage:
hammer compute-profile values update-volume [OPTIONS]
Options:
--compute-profile COMPUTE_PROFILE_NAME Compute profile name
--compute-profile-id COMPUTE_PROFILE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--volume VOLUME Volume parameters, should be comma separated list of values
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--volume-id VOLUME_ID Volume id
-h, --help Print help
Provider specific options:
NOTE: Bold attributes are required.
EC2:
--volume:
GCE:
--volume:
size_gb Volume size in GB, integer value
Libvirt:
--volume:
pool_name One of available storage pools
capacity String value, e.g. 10G
allocation
Initial allocation, e.g. 0G
format_type Possible values: raw, qcow2
OpenStack:
--volume:
oVirt:
--volume:
size_gb Volume size in GB, integer value
storage_domain ID or name of storage domain
bootable Boolean, set 1 for bootable, only one volume can be bootable
preallocate Boolean, set 1 to preallocate
wipe_after_delete Boolean, set 1 to wipe disk after delete
interface Disk interface name, must be ide, virto or virto_scsi
Rackspace:
--volume:
VMware:
--volume:
name
storage_pod Storage Pod ID from VMware
datastore Datastore ID from VMware
mode persistent/independent_persistent/independent_nonpersistent
size_gb Integer number, volume size in GB
thin true/false
eager_zero true/false
controller_key Associated SCSI controller key
AzureRM:
--volume:2.13. hammer compute-resource
コンピュートリソースを操作します。
Usage:
hammer compute-resource [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
clusters List available clusters for a compute resource
create Create a compute resource
delete Delete a compute resource
flavors List available flavors for a compute resource
folders List available folders for a compute resource
image View and manage compute resource's images
images List available images for a compute resource
info Show a compute resource
list List all compute resources
networks List available networks for a compute resource
resource-pools List resource pools for a compute resource cluster
security-groups List available security groups for a compute resource
storage-domains List storage domains for a compute resource
storage-pods List storage pods for a compute resource
update Update a compute resource
zones List available zone for a compute resource
Options:
-h, --help Print help2.13.1. hammer compute-resource clusters
コンピューティングリソースで利用可能なクラスターを一覧表示します。
Usage:
hammer compute-resource clusters [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----2.13.2. hammer compute-resource create
コンピュートリソースを作成します。
Usage:
hammer compute-resource create [OPTIONS]
Options:
--app-ident APP_IDENT Client ID for AzureRm
--caching-enabled CACHING_ENABLED Enable caching, for VMware only
One of true/false, yes/no, 1/0.
--datacenter DATACENTER For RHEV, VMware Datacenter
--description DESCRIPTION
--display-type DISPLAY_TYPE For Libvirt and RHEV only
Possible value(s): 'VNC', 'SPICE'
--domain DOMAIN For RHEL OpenStack Platform (v3) only
--email EMAIL Email for GCE only
--key-path KEY_PATH Certificate path for GCE only
--keyboard KEYBOARD For RHEV only
Possible value(s): 'ar', 'de-ch', 'es', 'fo', 'fr-ca', 'hu', 'ja', 'mk', 'no', 'pt-br', 'sv', 'da', 'en-gb', 'et', 'fr', 'fr-ch', 'is', 'lt', 'nl', 'pl', 'ru', 'th', 'de', 'en-us', 'fi', 'fr-be', 'hr', 'it', 'lv', 'nl-be', 'pt', 'sl', 'tr'
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--ovirt-quota OVIRT_QUOTA For RHEV only, ID of quota to use
--password PASSWORD Password for RHEV, EC2, VMware, RHEL OpenStack Platform. Secret key for EC2
--project PROJECT Project id for GCE only
--project-domain-id PROJECT_DOMAIN_ID For RHEL OpenStack Platform (v3) only
--project-domain-name PROJECT_DOMAIN_NAME For RHEL OpenStack Platform (v3) only
--provider PROVIDER Providers include Libvirt, Ovirt, EC2, Vmware, Openstack, GCE, AzureRm
--public-key PUBLIC_KEY For RHEV only
--public-key-path PUBLIC_KEY_PATH Path to a file that contains oVirt public key (For oVirt only)
--region REGION For AzureRm eg. 'eastus' and for EC2 only. Use
'us-gov-west-1' for EC2 GovCloud region
--secret-key SECRET_KEY Client Secret for AzureRm
--server SERVER For VMware
--set-console-password SET_CONSOLE_PASSWORD For Libvirt and VMware only
One of true/false, yes/no, 1/0.
--sub-id SUB_ID Subscription ID for AzureRm
--tenant TENANT For RHEL OpenStack Platform and AzureRm only
--url URL URL for Libvirt, RHEV and RHEL OpenStack Platform
--use-v4 USE_V4 For RHEV only
One of true/false, yes/no, 1/0.
--user USER Username for RHEV, EC2, VMware, RHEL OpenStack Platform. Access Key for
EC2.
--uuid UUID Deprecated, please use datacenter
--zone ZONE For GCE only
-h, --help Print help2.13.3. hammer compute-resource delete
コンピュートリソースを削除します。
Usage:
hammer compute-resource delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.13.4. hammer compute-resource flavors
コンピューティングリソースで利用可能なフレーバーを一覧表示します。
Usage:
hammer compute-resource flavors [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----2.13.5. hammer compute-resource folders
コンピューティングリソースで利用可能なフォルダーを一覧表示します。
Usage:
hammer compute-resource folders [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----2.13.6. hammer compute-resource image
コンピュートリソースのイメージを表示および管理します。
Usage:
hammer compute-resource image [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
available Show images available for addition
create Create an image
delete Delete an image
info Show an image
list List all images for a compute resource
update Update an image
Options:
-h, --help Print help2.13.6.1. hammer compute-resource image available
追加できるイメージを表示します。
Usage:
hammer compute-resource image available [OPTIONS]
Options:
--compute-resource NAME Compute resource name
--compute-resource-id ID
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Name | x | x | x
UUID | x | x |
-------|-----|---------|-----2.13.6.2. hammer compute-resource image create
イメージを作成する
Usage:
hammer compute-resource image create [OPTIONS]
Options:
--architecture ARCHITECTURE_NAME Architecture name
--architecture-id ARCHITECTURE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME
--operatingsystem OPERATINGSYSTEM_TITLE Operating system title
--operatingsystem-id OPERATINGSYSTEM_ID
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--password PASSWORD
--user-data USER_DATA Whether or not the image supports user data
One of true/false, yes/no, 1/0.
--username USERNAME
--uuid UUID Template ID in the compute resource
-h, --help Print help2.13.6.3. hammer compute-resource image delete
イメージを削除します。
Usage:
hammer compute-resource image delete [OPTIONS]
Options:
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.13.6.4. hammer compute-resource image info
イメージを表示します。
Usage:
hammer compute-resource image info [OPTIONS]
Options:
--architecture ARCHITECTURE_NAME Architecture name
--architecture-id ARCHITECTURE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--operatingsystem OPERATINGSYSTEM_TITLE Operating system title
--operatingsystem-id OPERATINGSYSTEM_ID
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-----------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-----------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Operating System | x | x |
Username | x | x |
UUID | x | x |
User Data | x | x |
Architecture | x | x |
IAM role | x | x |
Created at | x | x |
Updated at | x | x |
-----------------|-----|---------|-----2.13.6.5. hammer compute-resource image list
コンピュートリソースのイメージを一覧表示します。
Usage:
hammer compute-resource image list [OPTIONS]
Options:
--architecture ARCHITECTURE_NAME Architecture name
--architecture-id ARCHITECTURE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--operatingsystem OPERATINGSYSTEM_TITLE Operating system title
--operatingsystem-id OPERATINGSYSTEM_ID
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-----------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-----------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Operating System | x | x |
Username | x | x |
UUID | x | x |
User Data | x | x |
-----------------|-----|---------|-----
Search / Order fields:
architecture integer
compute_resource string
name string
operatingsystem integer
user_data Values: true, false
username string2.13.6.6. hammer compute-resource image update
イメージを更新します。
Usage:
hammer compute-resource image update [OPTIONS]
Options:
--architecture ARCHITECTURE_NAME Architecture name
--architecture-id ARCHITECTURE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--new-name NEW_NAME
--operatingsystem OPERATINGSYSTEM_TITLE Operating system title
--operatingsystem-id OPERATINGSYSTEM_ID
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--password PASSWORD
--user-data USER_DATA Whether or not the image supports user data
One of true/false, yes/no, 1/0.
--username USERNAME
--uuid UUID Template ID in the compute resource
-h, --help Print help2.13.7. hammer compute-resource images
コンピューティングリソースで利用可能なイメージを表示します。
Usage:
hammer compute-resource images [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Uuid | x | x |
Name | x | x | x
-------|-----|---------|-----2.13.8. hammer compute-resource info
コンピュートリソースを表示します。
Usage:
hammer compute-resource info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
---------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Provider | x | x |
Description | x | x |
User | x | x |
Locations/ | x | x |
Organizations/ | x | x |
Created at | x | x |
Updated at | x | x |
---------------|-----|---------|-----2.13.9. hammer compute-resource list
コンピュートリソースの一覧を表示します。
Usage:
hammer compute-resource list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
---------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Provider | x | x |
---------|-----|---------|-----
Search / Order fields:
id integer
location string
location_id integer
name string
organization string
organization_id integer
type string2.13.10. hammer compute-resource networks
コンピューティングリソースで利用可能なネットワークを一覧表示します。
Usage:
hammer compute-resource networks [OPTIONS]
Options:
--cluster-id CLUSTER_ID
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----2.13.11. hammer compute-resource resource-pools
コンピュートリソースクラスターのリソースプールを一覧表示します。
Usage:
hammer compute-resource resource-pools [OPTIONS]
Options:
--cluster-id CLUSTER_ID
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----2.13.12. hammer compute-resource security-groups
コンピューティングリソースで利用可能なセキュリティーグループを一覧表示します。
Usage:
hammer compute-resource security-groups [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----2.13.13. hammer compute-resource storage-domains
コンピューティングリソースのストレージドメインを一覧表示します。
Usage:
hammer compute-resource storage-domains [OPTIONS]
Options:
--cluster-id CLUSTER_ID
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--storage-domain STORAGE_DOMAIN
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----2.13.14. hammer compute-resource storage-pods
コンピューティングリソースのストレージ Pod を一覧表示します。
Usage:
hammer compute-resource storage-pods [OPTIONS]
Options:
--cluster-id CLUSTER_ID
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--storage-pod STORAGE_POD
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----2.13.15. hammer compute-resource update
コンピュートリソースを更新します。
Usage:
hammer compute-resource update [OPTIONS]
Options:
--app-ident APP_IDENT Client ID for AzureRm
--caching-enabled CACHING_ENABLED Enable caching, for VMware only
One of true/false, yes/no, 1/0.
--datacenter DATACENTER For RHEV, VMware Datacenter
--description DESCRIPTION
--display-type DISPLAY_TYPE For Libvirt and RHEV only
Possible value(s): 'VNC', 'SPICE'
--domain DOMAIN For RHEL OpenStack Platform (v3) only
--email EMAIL Email for GCE only
--id ID
--key-path KEY_PATH Certificate path for GCE only
--keyboard KEYBOARD For RHEV only
Possible value(s): 'ar', 'de-ch', 'es', 'fo', 'fr-ca', 'hu', 'ja', 'mk', 'no', 'pt-br', 'sv', 'da', 'en-gb', 'et', 'fr', 'fr-ch', 'is', 'lt', 'nl', 'pl', 'ru', 'th', 'de', 'en-us', 'fi', 'fr-be', 'hr', 'it', 'lv', 'nl-be', 'pt', 'sl', 'tr'
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME Compute resource name
--new-name NEW_NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--ovirt-quota OVIRT_QUOTA For RHEV only, ID of quota to use
--password PASSWORD Password for RHEV, EC2, VMware, RHEL OpenStack Platform. Secret key for EC2
--project PROJECT Project id for GCE only
--project-domain-id PROJECT_DOMAIN_ID For RHEL OpenStack Platform (v3) only
--project-domain-name PROJECT_DOMAIN_NAME For RHEL OpenStack Platform (v3) only
--provider PROVIDER Providers include Libvirt, Ovirt, EC2, Vmware, Openstack, GCE, AzureRm
--public-key PUBLIC_KEY For RHEV only
--public-key-path PUBLIC_KEY_PATH Path to a file that contains oVirt public key (For oVirt only)
--region REGION For AzureRm eg. 'eastus' and for EC2 only. Use
'us-gov-west-1' for EC2 GovCloud region
--secret-key SECRET_KEY Client Secret for AzureRm
--server SERVER For VMware
--set-console-password SET_CONSOLE_PASSWORD For Libvirt and VMware only
One of true/false, yes/no, 1/0.
--sub-id SUB_ID Subscription ID for AzureRm
--tenant TENANT For RHEL OpenStack Platform and AzureRm only
--url URL URL for Libvirt, RHEV and RHEL OpenStack Platform
--use-v4 USE_V4 For RHEV only
One of true/false, yes/no, 1/0.
--user USER Username for RHEV, EC2, VMware, RHEL OpenStack Platform. Access Key for
EC2.
--uuid UUID Deprecated, please use datacenter
--zone ZONE For GCE only
-h, --help Print help2.13.16. hammer compute-resource zones
コンピューティングリソースで利用可能なゾーンを表示します。
Usage:
hammer compute-resource zones [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Compute resource name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----2.14. hammer config-group
設定グループを操作します。
Usage:
hammer config-group [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
create Create a config group
delete Delete a config group
info Show a config group
list List of config groups
update Update a config group
Options:
-h, --help Print help2.14.1. hammer config-group create
設定グループを作成します。
Usage:
hammer config-group create [OPTIONS]
Options:
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--puppet-class-ids PUPPET_CLASS_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--puppet-classes PUPPET_CLASS_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.14.2. hammer config-group delete
設定グループを削除します。
Usage:
hammer config-group delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.14.3. hammer config-group info
設定グループを表示します。
Usage:
hammer config-group info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
---------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Puppetclasses/ | x | x |
---------------|-----|---------|-----2.14.4. hammer config-group list
設定グループの一覧を表示します。
Usage:
hammer config-group list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
ID | x | x | x
Name | x | x | x
-------|-----|---------|-----
Search / Order fields:
class string
name string2.14.5. hammer config-group update
設定グループを更新します。
Usage:
hammer config-group update [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--new-name NEW_NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--puppet-class-ids PUPPET_CLASS_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--puppet-classes PUPPET_CLASS_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.15. hammer config-report
レポートを参照および読み込みます。
Usage:
hammer config-report [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
delete Delete a report
info Show a report
list List all reports
Options:
-h, --help Print help2.15.1. hammer config-report delete
レポートを削除します。
Usage:
hammer config-report delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.15.2. hammer config-report info
レポートを表示します。
Usage:
hammer config-report info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
--------------------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
--------------------------------|-----|---------|-----
Id | x | x | x
Host | x | x |
Reported at | x | x |
Report status/Applied | x | x |
Report status/Restarted | x | x |
Report status/Failed | x | x |
Report status/Restart Failures | x | x |
Report status/Skipped | x | x |
Report status/Pending | x | x |
Report metrics/config_retrieval | x | x |
Report metrics/exec | x | x |
Report metrics/file | x | x |
Report metrics/package | x | x |
Report metrics/service | x | x |
Report metrics/user | x | x |
Report metrics/yumrepo | x | x |
Report metrics/filebucket | x | x |
Report metrics/cron | x | x |
Report metrics/total | x | x |
Logs/Resource | x | x |
Logs/Message | x | x |
--------------------------------|-----|---------|-----2.15.3. hammer config-report list
レポートの一覧を表示します。
Usage:
hammer config-report list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-----------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-----------------|-----|---------|-----
Id | x | x | x
Host | x | x |
Last report | x | x |
Applied | x | x |
Restarted | x | x |
Failed | x | x |
Restart Failures | x | x |
Skipped | x | x |
Pending | x | x |
-----------------|-----|---------|-----
Search / Order fields:
applied integer
environment string
eventful Values: true, false
failed integer
failed_restarts integer
host string
host_id integer
hostgroup string
hostgroup_fullname string
hostgroup_title string
last_report datetime
location string
log text
organization string
origin string
pending integer
reported datetime
resource text
restarted integer
skipped integer2.16. hammer content-view
コンテンツビューを操作します。
Usage:
hammer content-view [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
add-repository Associate a resource
add-version Add a content view version to a composite view
component View and manage components
copy Copy a content view
create Create a content view
delete Delete a content view
filter View and manage filters
info Show a content view
list List content views
publish Publish a content view
puppet-module View and manage puppet modules
purge Delete old versions of a content view
remove Remove versions and/or environments from a content view and reassign systems and keys
remove-from-environment Remove a content view from an environment
remove-repository Disassociate a resource
remove-version Remove a content view version from a composite view
update Update a content view
version View and manage content view versions
Options:
-h, --help Print help2.16.1. hammer content-view add-repository
リソースを関連付けます。
Usage:
hammer content-view add-repository [OPTIONS]
Options:
--id ID Content view numeric identifier
--name NAME Content view name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--product PRODUCT_NAME Product name to search by
--product-id PRODUCT_ID Product numeric identifier
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
-h, --help Print help2.16.2. hammer content-view add-version
コンテンツビューバージョンを複合ビューに追加します。
Usage:
hammer content-view add-version [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier to search by
--content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
--content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier
--id ID Content view numeric identifier
--name NAME Content view name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.16.3. hammer content-view component
コンポーネントを表示および管理します。
Usage:
hammer content-view component [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
add Add components to the content view
list List components attached to this content view
remove Remove components from the content view
update Update a component associated with the content view
Options:
-h, --help Print help2.16.3.1. hammer content-view component add
コンポーネントをコンテンツビューに追加します。
Usage:
hammer content-view component add [OPTIONS]
Options:
--component-content-view COMPONENT_CONTENT_VIEW_NAME Content View name of the component who's latest version is desired
--component-content-view-id COMPONENT_CONTENT_VIEW_ID Content View identifier of the component who's latest version is desired
--component-content-view-version COMPONENT_CONTENT_VIEW_VERSION_VERSION Content View Version number of the component. Either use this or --component-content-view-version-id option
--component-content-view-version-id COMPONENT_CONTENT_VIEW_VERSION_ID Content View Version identifier of the component
--composite-content-view COMPOSITE_CONTENT_VIEW_NAME Name of the composite content view
--composite-content-view-id COMPOSITE_CONTENT_VIEW_ID Composite content view identifier
--latest Select the latest version of the components content view is desired
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.16.3.2. hammer content-view component list
このコンテンツビューに割り当てられたコンポーネントの一覧を表示します。
Usage:
hammer content-view component list [OPTIONS]
Options:
--composite-content-view COMPOSITE_CONTENT_VIEW_NAME Name of the composite content view
--composite-content-view-id COMPOSITE_CONTENT_VIEW_ID Composite content view identifier
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
----------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
----------------|-----|---------|-----
Id | x | x | x
Name | x | x |
Version | x | x |
Current Version | x | x |
Version Id | x | x |
----------------|-----|---------|-----2.16.3.3. hammer content-view component remove
コンテンツビューからコンポーネントを削除します。
Usage:
hammer content-view component remove [OPTIONS]
Options:
--component-content-view-ids COMPONENT_CONTENT_VIEW_IDs Array of component content view identfiers to remove. Comma separated list of values
--component-content-views COMPONENT_CONTENT_VIEW_NAMES Array of component content view names to remove. Comma separated list of values
--component-ids COMPONENT_IDS Array of content view component IDs to remove. Identifier of the component
Association
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--composite-content-view COMPOSITE_CONTENT_VIEW_NAME Name of the composite content view
--composite-content-view-id COMPOSITE_CONTENT_VIEW_ID Composite content view identifier
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.16.3.4. hammer content-view component update
コンテンツビューに関連付けられたコンポーネントを更新します。
Usage:
hammer content-view component update [OPTIONS]
Options:
--component-content-view COMPONENT_CONTENT_VIEW_NAME Content View name of the component who's latest version is desired
--component-content-view-id COMPONENT_CONTENT_VIEW_ID Content View identifier of the component who's latest version is desired
--component-content-view-version COMPONENT_CONTENT_VIEW_VERSION_VERSION Content View Version number of the component. Either use this or --component-content-view-version-id option
--component-content-view-version-id COMPONENT_CONTENT_VIEW_VERSION_ID Content View Version identifier of the component
--composite-content-view COMPOSITE_CONTENT_VIEW_NAME Name of the composite content view
--composite-content-view-id COMPOSITE_CONTENT_VIEW_ID Composite content view identifier
--id ID Content view component ID. Identifier of the component association
--latest Select the latest version of the components content view is desired
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.16.4. hammer content-view copy
コンテンツビューをコピーします。
Usage:
hammer content-view copy [OPTIONS]
Options:
--id ID Content view numeric identifier
--name NAME Content view name to search by
--new-name NEW_NAME New content view name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.16.5. hammer content-view create
コンテンツビューを作成します。
Usage:
hammer content-view create [OPTIONS]
Options:
--auto-publish AUTO_PUBLISH Enable/Disable auto publish of composite view
One of true/false, yes/no, 1/0.
--component-ids COMPONENT_IDS List of component content view version ids for composite views
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--composite Create a composite content view
--description DESCRIPTION Description for the content view
--label LABEL Content view label
--name NAME Name of the content view
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--repository-ids REPOSITORY_IDS List of repository ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--solve-dependencies SOLVE_DEPENDENCIES Solve RPM dependencies by default on Content View publish, defaults to
False
One of true/false, yes/no, 1/0.
-h, --help Print help2.16.6. hammer content-view delete
コンテンツビューを削除します。
Usage:
hammer content-view delete [OPTIONS]
Options:
--async Do not wait for the task
--id ID Content view numeric identifier
--name NAME Content view name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.16.7. hammer content-view filter
フィルターを表示および管理します。
Usage:
hammer content-view filter [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
add-repository Associate a resource
create Create a filter for a content view
delete Delete a filter
info Show filter info
list List filters
remove-repository Disassociate a resource
rule View and manage filter rules
update Update a filter
Options:
-h, --help Print help2.16.7.1. hammer content-view filter add-repository
リソースを関連付けます。
Usage:
hammer content-view filter add-repository [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--id ID Filter identifier
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--product PRODUCT_NAME Product name to search by
--product-id PRODUCT_ID Product numeric identifier
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
-h, --help Print help2.16.7.2. hammer content-view filter create
コンテンツビューのフィルターを作成します。
Usage:
hammer content-view filter create [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--description DESCRIPTION Description of the filter
--inclusion INCLUSION Specifies if content should be included or excluded, default:
Inclusion=false
One of true/false, yes/no, 1/0.
--name NAME Name of the filter
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--original-packages ORIGINAL_PACKAGES Add all packages without errata to the included/excluded list. (package
Filter only)
One of true/false, yes/no, 1/0.
--product PRODUCT_NAME Product name to search by
--product-id PRODUCT_ID Product numeric identifier
--repositories REPOSITORY_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--repository-ids REPOSITORY_IDS List of repository ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--type TYPE Type of filter (e.g. rpm, package_group, erratum, docker, modulemd)
-h, --help Print help2.16.7.3. hammer content-view filter delete
フィルターを削除します。
Usage:
hammer content-view filter delete [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--id ID Filter identifier
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.16.7.4. hammer content-view filter info
フィルター情報を表示します。
Usage:
hammer content-view filter info [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Filter identifier
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
----------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
----------------------|-----|---------|-----
Filter ID | x | x | x
Name | x | x | x
Type | x | x |
Inclusion | x | x |
Description | x | x |
Repositories/ID | x | x |
Repositories/Name | x | x |
Repositories/Label | x | x |
Rules/ID | x | x |
Rules/Name | x | x |
Rules/Version | x | x |
Rules/Minimum Version | x | x |
Rules/Maximum Version | x | x |
Rules/Errata ID | x | x |
Rules/Start Date | x | x |
Rules/End Date | x | x |
Rules/Types | x | x |
Rules/Created | x | x |
Rules/Updated | x | x |
----------------------|-----|---------|-----2.16.7.5. hammer content-view filter list
フィルターの一覧を表示します。
Usage:
hammer content-view filter list [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--name NAME Filter content view filters by name
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Search string
--types TYPES Types of filters
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help
Predefined field sets:
------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------|-----|---------|-----
Filter ID | x | x | x
Name | x | x | x
Description | x | x |
Type | x | x |
Inclusion | x | x |
------------|-----|---------|-----
Search / Order fields:
content_type Values: rpm, package_group, erratum, docker, modulemd
inclusion_type Values: include, exclude
name string2.16.7.6. hammer content-view filter remove-repository
リソースの関連付けを解除します。
Usage:
hammer content-view filter remove-repository [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--id ID Filter identifier
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--product PRODUCT_NAME Product name to search by
--product-id PRODUCT_ID Product numeric identifier
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
-h, --help Print help2.16.7.7. hammer content-view filter rule
フィルタールールを表示および管理します。
Usage:
hammer content-view filter rule [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
create Create a filter rule. The parameters included should be based upon the filter type.
delete Delete a filter rule
info Show filter rule info
list List filter rules
update Update a filter rule. The parameters included should be based upon the filter type.
Options:
-h, --help Print help2.16.7.7.1. hammer content-view filter rule create
フィルタールールを作成します。組み込まれるパラメーターはフィルタータイプに基づくものでなければなりません。
Usage:
hammer content-view filter rule create [OPTIONS]
Options:
--architecture ARCHITECTURE Package: architecture
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by
--content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--date-type DATE_TYPE Erratum: search using the 'Issued On' or 'Updated On'
Column of the errata. Values are 'issued'/'updated'
--end-date END_DATE Erratum: end date (YYYY-MM-DD)
--errata-id ERRATA_ID Erratum: id
--errata-ids ERRATA_IDS Erratum: IDs or a select all object
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--max-version MAX_VERSION Package: maximum version
--min-version MIN_VERSION Package: minimum version
--module-stream-ids MODULE_STREAM_IDS Module stream ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME Package, package group, or docker tag names
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--names NAMES Package and package group names
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--start-date START_DATE Erratum: start date (YYYY-MM-DD)
--types TYPES Erratum: types (enhancement, bugfix, security)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--uuid UUID Package group: uuid
--version VERSION Package: version
-h, --help Print help2.16.7.7.2. hammer content-view filter rule delete
フィルタールールを削除します。
Usage:
hammer content-view filter rule delete [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by
--content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--id ID Rule identifier
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.16.7.7.3. hammer content-view filter rule info
フィルタールール情報を表示します。
Usage:
hammer content-view filter rule info [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by
--content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Rule identifier
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
----------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
----------------|-----|---------|-----
Rule ID | x | x | x
Filter ID | x | x |
Name | x | x | x
Version | x | x |
Minimum Version | x | x |
Maximum Version | x | x |
Architecture | x | x |
Errata ID | x | x |
Start Date | x | x |
End Date | x | x |
Date Type | x | x |
Types | x | x |
Created | x | x |
Updated | x | x |
----------------|-----|---------|-----2.16.7.7.4. hammer content-view filter rule list
フィルタールールを一覧表示します。
Usage:
hammer content-view filter rule list [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by
--content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--errata-id ERRATA_ID Errata_id of the content view filter rule
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--name NAME Name of the content view filter rule
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Search string
-h, --help Print help
Predefined field sets:
----------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
----------------|-----|---------|-----
Rule ID | x | x | x
Filter ID | x | x |
Name | x | x | x
Version | x | x |
Minimum Version | x | x |
Maximum Version | x | x |
Architecture | x | x |
Errata ID | x | x |
Start Date | x | x |
End Date | x | x |
----------------|-----|---------|-----2.16.7.7.5. hammer content-view filter rule update
フィルタールールを更新します。組み込まれるパラメーターはフィルタータイプに基づくものでなければなりません。
Usage:
hammer content-view filter rule update [OPTIONS]
Options:
--architecture ARCHITECTURE Package: architecture
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by
--content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--end-date END_DATE Erratum: end date (YYYY-MM-DD)
--errata-id ERRATA_ID Erratum: id
--id ID Rule identifier
--max-version MAX_VERSION Package: maximum version
--min-version MIN_VERSION Package: minimum version
--name NAME Name to search by
--new-name NEW_NAME Package, package group, or docker tag: name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--start-date START_DATE Erratum: start date (YYYY-MM-DD)
--types TYPES Erratum: types (enhancement, bugfix, security)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--version VERSION Package: version
-h, --help Print help2.16.7.8. hammer content-view filter update
フィルターを更新します。
Usage:
hammer content-view filter update [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--description DESCRIPTION Description of the filter
--id ID Filter identifier
--inclusion INCLUSION Specifies if content should be included or excluded, default:
Inclusion=false
One of true/false, yes/no, 1/0.
--name NAME Name to search by
--new-name NEW_NAME New name for the filter
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--original-packages ORIGINAL_PACKAGES Add all packages without errata to the included/excluded list. (package
Filter only)
One of true/false, yes/no, 1/0.
--repositories REPOSITORY_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--repository-ids REPOSITORY_IDS List of repository ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.16.8. hammer content-view info
コンテンツビューを表示します。
Usage:
hammer content-view info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Content view numeric identifier
--name NAME Content view name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
-----------------------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-----------------------------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Label | x | x |
Composite | x | x |
Description | x | x |
Content Host Count | x | x |
Force Puppet | x | x |
Solve Dependencies | x | x |
Organization | x | x |
Yum Repositories/ID | x | x |
Yum Repositories/Name | x | x |
Yum Repositories/Label | x | x |
Container Image Repositories/ID | x | x |
Container Image Repositories/Name | x | x |
Container Image Repositories/Label | x | x |
OSTree Repositories/ID | x | x |
OSTree Repositories/Name | x | x |
OSTree Repositories/Label | x | x |
Puppet Modules/ID | x | x |
Puppet Modules/UUID | x | x |
Puppet Modules/Name | x | x |
Puppet Modules/Author | x | x |
Lifecycle Environments/ID | x | x |
Lifecycle Environments/Name | x | x |
Versions/ID | x | x |
Versions/Version | x | x |
Versions/Published | x | x |
Components/ID | x | x |
Components/Name | x | x |
Activation Keys/ | x | x |
-----------------------------------|-----|---------|-----2.16.9. hammer content-view list
コンテンツビューの一覧を表示します。
Usage:
hammer content-view list [OPTIONS]
Options:
--composite COMPOSITE Filter only composite content views
One of true/false, yes/no, 1/0.
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--name NAME Name of the content view
--noncomposite NONCOMPOSITE Filter out composite content views
One of true/false, yes/no, 1/0.
--nondefault NONDEFAULT Filter out default content views
One of true/false, yes/no, 1/0.
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Search string
--without WITHOUT Do not include this array of content views
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help
Predefined field sets:
----------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
----------------|-----|---------|-----
Content View ID | x | x | x
Name | x | x | x
Label | x | x |
Composite | x | x |
Last Published | x | x |
Repository IDs | x | x |
----------------|-----|---------|-----
Search / Order fields:
composite Values: true, false
label string
name string
organization_id integer2.16.10. hammer content-view publish
コンテンツビューを公開します。
Usage:
hammer content-view publish [OPTIONS]
Options:
--async Do not wait for the task
--description DESCRIPTION Description for the new published content view version
--id ID Content view identifier
--major MAJOR Override the major version number
--minor MINOR Override the minor version number
--name NAME Content view name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--repos-units REPOS_UNITS Specify the list of units in each repo
Comma separated list of values defined by a schema. See Option details section below.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help
Option details:
Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value):
--repos-units "label=<string>\,rpm_filenames=<array>, ... "2.16.11. hammer content-view puppet-module
puppet モジュールを表示および管理します。
Usage:
hammer content-view puppet-module [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
add Add a puppet module to the content view
list List content view puppet modules
remove Remove a puppet module from the content view
Options:
-h, --help Print help2.16.11.1. hammer content-view puppet-module add
Puppet モジュールをコンテンツビューに追加します。
Usage:
hammer content-view puppet-module add [OPTIONS]
Options:
--author AUTHOR Puppet module's author to search by
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--id ID The id of the puppet module to associate
--name NAME Puppet module name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--uuid UUID Puppet module's UUID to search by
-h, --help Print help2.16.11.2. hammer content-view puppet-module list
コンテンツビューの Puppet モジュールを一覧表示します。
Usage:
hammer content-view puppet-module list [OPTIONS]
Options:
--author AUTHOR Author of the puppet module
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--name NAME Name of the puppet module
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Search string
--uuid UUID Uuid of the puppet module
-h, --help Print help
Predefined field sets:
--------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
--------|-----|---------|-----
UUID | x | x | x
Name | x | x | x
Author | x | x | x
Version | x | x |
--------|-----|---------|-----
Search / Order fields:
author string
content_view_name string
name string
uuid string2.16.11.3. hammer content-view puppet-module remove
コンテンツビューから Puppet モジュールを削除します。
Usage:
hammer content-view puppet-module remove [OPTIONS]
Options:
--author AUTHOR Puppet module's author to search by
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--id ID Puppet module ID
--name NAME Puppet module name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--uuid UUID Puppet module's UUID to search by
-h, --help Print help2.16.12. hammer content-view purge
古いバージョンのコンテンツビューを削除します。
Usage:
hammer content-view purge [OPTIONS]
Options:
--async Do not wait for the task
--count COUNT Count of unused versions to keep
Default: 3
--id ID Content View numeric identifier
--name NAME Content View name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.16.13. hammer content-view remove
コンテンツビューからバージョンや環境を削除し、システムおよびキーを再度割り当てます。
Usage:
hammer content-view remove [OPTIONS]
Options:
--async Do not wait for the task
--content-view-version-ids VERSION_IDS Version ids to remove
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--content-view-versions CONTENT_VIEW_VERSION_VERSIONS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--environment-ids ENVIRONMENT_IDS (--environment-ids is deprecated: Use --lifecycle-environment-ids instead)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--environments ENVIRONMENT_NAMES (--environments is deprecated: Use --lifecycle-environments instead)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Content view numeric identifier
--key-content-view-id KEY_CONTENT_VIEW_ID Content view to reassign orphaned activation keys to
--key-environment-id KEY_ENVIRONMENT_ID Environment to reassign orphaned activation keys to
--lifecycle-environment-ids LIFECYCLE_ENVIRONMENT_IDS Environment ids to remove
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--lifecycle-environments LIFECYCLE_ENVIRONMENT_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME Content view name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--system-content-view-id SYSTEM_CONTENT_VIEW_ID Content view to reassign orphaned systems to
--system-environment-id SYSTEM_ENVIRONMENT_ID Environment to reassign orphaned systems to
-h, --help Print help2.16.14. hammer content-view remove-from-environment
環境からコンテンツビューを削除します。
Usage:
hammer content-view remove-from-environment [OPTIONS]
Options:
--async Do not wait for the task
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--id ID Content view numeric identifier
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--name NAME Content view name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.16.15. hammer content-view remove-repository
リソースの関連付けを解除します。
Usage:
hammer content-view remove-repository [OPTIONS]
Options:
--id ID Content view numeric identifier
--name NAME Content view name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--product PRODUCT_NAME Product name to search by
--product-id PRODUCT_ID Product numeric identifier
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
-h, --help Print help2.16.16. hammer content-view remove-version
複合ビューからコンテンツビューのバージョンを削除します。
Usage:
hammer content-view remove-version [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
--content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier
--id ID Content view numeric identifier
--name NAME Content view name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.16.17. hammer content-view update
コンテンツビューを更新します。
Usage:
hammer content-view update [OPTIONS]
Options:
--auto-publish AUTO_PUBLISH Enable/Disable auto publish of composite view
One of true/false, yes/no, 1/0.
--component-ids COMPONENT_IDS List of component content view version ids for composite views
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--description DESCRIPTION Description for the content view
--id ID Content view identifier
--name NAME Content view name to search by
--new-name NEW_NAME New name for the content view
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--repository-ids REPOSITORY_IDS List of repository ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--solve-dependencies SOLVE_DEPENDENCIES Solve RPM dependencies by default on Content View publish, defaults to
False
One of true/false, yes/no, 1/0.
-h, --help Print help2.16.18. hammer content-view version
コンテンツビューのバージョンを表示および管理します。
Usage:
hammer content-view version [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
delete Remove content view version
export Export a content view version
export-default Export the library default content view
export-legacy Export a content view (legacy method)
import Import a content view version
incremental-update Perform an Incremental Update on one or more Content View Versions
info Show content view version
list List content view versions
promote Promote a content view version
republish-repositories Forces a republish of the version's repositories' metadata
update Update a content view version
Options:
-h, --help Print help2.16.18.1. hammer content-view version delete
コンテンツビューバージョンを削除します。
Usage:
hammer content-view version delete [OPTIONS]
Options:
--async Do not wait for the task
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--id ID Content view version identifier
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--version VERSION Content view version number
-h, --help Print help2.16.18.2. hammer content-view version export
コンテンツビューバージョンをエクスポートします。
Usage:
hammer content-view version export [OPTIONS]
Options:
--export-dir EXPORT_DIR Directory to put content view version export into.
--id ID Content View Version numeric identifier
-h, --help Print help2.16.18.3. hammer content-view version export-default
ライブラリーのデフォルトコンテンツビューをエクスポートします。
Usage:
hammer content-view version export-default [OPTIONS]
Options:
--export-dir EXPORT_DIR Directory to put content view version export into.
-h, --help Print help2.16.18.4. hammer content-view version export-legacy
コンテンツビューをエクスポートします (従来の方法)。
Usage:
hammer content-view version export-legacy [OPTIONS]
Options:
--async Do not wait for the task
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--export-to-iso EXPORT_TO_ISO Export to ISO format
One of true/false, yes/no, 1/0.
--id ID Content view version identifier
--iso-mb-size ISO_MB_SIZE Maximum size of each ISO in MB
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--since SINCE Optional date of last export (ex: 2010-01-01T12:00:00Z)
--version VERSION Content view version number
-h, --help Print help2.16.18.5. hammer content-view version import
コンテンツビューバージョンをインポートします。
Usage:
hammer content-view version import [OPTIONS]
Options:
--async Do not wait for the task
--export-tar EXPORT_TAR Location of export tar on disk
--organization-id ORGANIZATION_ID Organization numeric identifier
-h, --help Print help2.16.18.6. hammer content-view version incremental-update
1 つ以上のコンテンツビューバージョンで増分更新を実行します。
Usage:
hammer content-view version incremental-update [OPTIONS]
Options:
--async Do not wait for the task
--content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
--content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier
--deb-ids DEB_IDS Deb Package ids to copy into the new versions
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--debs DEB_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--description DESCRIPTION The description for the new generated Content View Versions
--errata-ids ERRATA_IDS Errata ids to copy into the new versions
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--host-ids HOST_IDS IDs of hosts to update
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--lifecycle-environment-ids ENVIRONMENT_IDS List of lifecycle environment IDs to update the content view version in
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--lifecycle-environments ENVIRONMENTS List of lifecycle environment names to update the content view version in
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization ORGANIZATION_NAME Organization name for resolving lifecycle environment names
--organization-id ORGANIZATION_ID Organization id for resolving lifecycle environment names
--package-ids PACKAGE_IDS Package ids to copy into the new versions
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--packages PACKAGE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--propagate-all-composites PROPAGATE_ALL_COMPOSITES If true, will publish a new composite version using any specified
Content_view_version_id that has been promoted to a lifecycle environment
One of true/false, yes/no, 1/0.
--puppet-module-ids PUPPET_MODULE_IDS Puppet Module ids to copy into the new versions
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--puppet-modules PUPPET_MODULE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--resolve-dependencies RESOLVE_DEPENDENCIES If true, when adding the specified errata or packages, any needed
Dependencies will be copied as well. Defaults to true
One of true/false, yes/no, 1/0.
--update-all-hosts UPDATE Update all editable and applicable hosts within the specified Content View and \
Lifecycle Environments
One of true/false, yes/no, 1/0.
-h, --help Print help2.16.18.7. hammer content-view version info
コンテンツビューバージョンを表示します。
Usage:
hammer content-view version info [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Content view version identifier
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--version VERSION Content view version number
-h, --help Print help
Predefined field sets:
-----------------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-----------------------------|-----|---------|-----
ID | x | x | x
Name | x | x |
Version | x | x | x
Description | x | x |
Content View ID | x | x |
Content View Name | x | x |
Content View Label | x | x |
Lifecycle Environments/ID | x | x |
Lifecycle Environments/Name | x | x |
Lifecycle Environments/Label | x | x |
Repositories/ID | x | x |
Repositories/Name | x | x |
Repositories/Label | x | x |
Puppet Modules/ID | x | x |
Puppet Modules/Name | x | x |
Puppet Modules/Author | x | x |
Puppet Modules/Version | x | x |
-----------------------------|-----|---------|-----2.16.18.8. hammer content-view version list
コンテンツビューのバージョンを一覧表示します。
Usage:
hammer content-view version list [OPTIONS]
Options:
--composite-version-id COMPOSITE_VERSION_ID Filter versions that are components in the specified composite version
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--puppet-module PUPPET_MODULE_NAME Name to search by
--puppet-module-id PUPPET_MODULE_ID A puppet module identifier
--search SEARCH Search string
--triggered-by-id TRIGGERED_BY_ID Filter composite versions whose publish was triggered by the specified
Component version
--version VERSION Filter versions by version number
-h, --help Print help
Predefined field sets:
-----------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-----------------------|-----|---------|-----
ID | x | x | x
Name | x | x |
Version | x | x | x
Description | x | x |
Lifecycle Environments | x | x |
-----------------------|-----|---------|-----
Search / Order fields:
content_view_id integer
repository string
version string2.16.18.9. hammer content-view version promote
コンテンツビューバージョンをプロモートします。
Usage:
hammer content-view version promote [OPTIONS]
Options:
--async Do not wait for the task
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--description DESCRIPTION The description for the content view version promotion
--environment-ids ENVIRONMENT_IDS Identifiers for Lifecycle Environment (--environment-ids is deprecated: Use --lifecycle-environment-ids instead)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--force Force content view promotion and bypass lifecycle environment restriction
--from-lifecycle-environment FROM_ENVIRONMENT_ID Environment name from where to promote its version from (if version is unknown)
--from-lifecycle-environment-id FROM_ENVIRONMENT_ID Id of the environment from where to promote its version from (if version is unknown)
--id ID Content view version identifier
--lifecycle-environment-ids LIFECYCLE_ENVIRONMENT_IDS Identifiers for Lifecycle Environment
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--to-lifecycle-environment TO_ENVIRONMENT Name of the target environment
--to-lifecycle-environment-id TO_ENVIRONMENT_ID Id of the target environment
--version VERSION Content view version number
-h, --help Print help2.16.18.10. hammer content-view version republish-repositories
バージョンのリポジトリーのメタデータを強制的に再公開します。
Usage:
hammer content-view version republish-repositories [OPTIONS]
Options:
--async Do not wait for the task
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--id ID Content view version identifier
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--version VERSION Content view version number
-h, --help Print help2.16.18.11. hammer content-view version update
コンテンツビューのバージョンを更新します。
Usage:
hammer content-view version update [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--description DESCRIPTION The description for the content view version
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--id ID Content view version identifier
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--new-version NEW_VERSION
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--version VERSION Content view version number
-h, --help Print help2.17. hammer defaults
デフォルト設定を管理します。
Usage:
hammer defaults [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
add Add a default parameter to config
delete Delete a default param
list List all the default parameters
providers List all the providers
Options:
-h, --help Print help2.17.1. hammer defaults add
デフォルトパラメーターを設定に追加します。
Usage:
hammer defaults add [OPTIONS]
Options:
--param-name OPTION_NAME The name of the default option (e.g. organization_id)
--param-value OPTION_VALUE The value for the default option
--provider OPTION_PROVIDER The name of the provider providing the value. For list available providers see `hammer defaults providers`
-h, --help Print help2.17.2. hammer defaults delete
デフォルトパラメーターを削除します。
Usage:
hammer defaults delete [OPTIONS]
Options:
--param-name OPTION_NAME The name of the default option
-h, --help Print help2.17.3. hammer defaults list
デフォルトパラメーターの一覧を表示します。
Usage:
hammer defaults list [OPTIONS]
Options:
-h, --help Print help2.17.4. hammer defaults providers
プロバイダーの一覧を表示します。
Usage:
hammer defaults providers [OPTIONS]
Options:
-h, --help Print help2.18. hammer discovery
検出されたホストを操作します。
Usage:
hammer discovery [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
auto-provision Auto provision a host
delete Delete a discovered host
facts List all fact values
info Show a discovered host
list List all discovered hosts
provision Provision a discovered host
reboot Reboot a host
refresh-facts Refresh the facts of a host
Options:
-h, --help Print help2.18.1. hammer discovery auto-provision
ホストの自動プロビジョニングを行います。
Usage:
hammer discovery auto-provision [OPTIONS]
Options:
--all Auto provision all discovered hosts
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.18.2. hammer discovery delete
検出されたホストを削除します。
Usage:
hammer discovery delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.18.3. hammer discovery facts
ファクト値の一覧を表示します。
Usage:
hammer discovery facts [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-------|-----|--------
FIELDS | ALL | DEFAULT
-------|-----|--------
Fact | x | x
Value | x | x
-------|-----|--------
Search / Order fields:
fact string
fact_short_name string
facts string
host string
host.hostgroup string
host_id integer
location string
location_id integer
name string
organization string
organization_id integer
origin string
reported_at datetime
short_name string
type string
value string2.18.4. hammer discovery info
検出されたホストを表示します。
Usage:
hammer discovery info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
MAC | x | x |
CPUs | x | x |
Memory | x | x |
Disk count | x | x |
Disks size | x | x |
Subnet | x | x |
Last report | x | x |
IP | x | x |
Model | x | x |
Organization | x | x |
Location | x | x |
-------------|-----|---------|-----2.18.5. hammer discovery list
検出されたホストの一覧を表示します。
Usage:
hammer discovery list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort results
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Paginate results
--per-page PER_PAGE Number of entries per request
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
MAC | x | x |
CPUs | x | x |
Memory | x | x |
Disk count | x | x |
Disks size | x | x |
Subnet | x | x |
Last report | x | x |
------------|-----|---------|-----2.18.6. hammer discovery provision
検出されたホストをプロビジョニングします。
Usage:
hammer discovery provision [OPTIONS]
Options:
--architecture ARCHITECTURE_NAME Architecture name
--architecture-id ARCHITECTURE_ID
--ask-root-password ASK_ROOT_PW One of true/false, yes/no, 1/0.
--build BUILD One of true/false, yes/no, 1/0.
--capabilities CAPABILITIES
--domain DOMAIN_NAME Domain name
--domain-id DOMAIN_ID Numerical ID or domain name
--enabled ENABLED One of true/false, yes/no, 1/0.
--environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment-id instead)
--hostgroup HOSTGROUP_NAME Hostgroup name
--hostgroup-id HOSTGROUP_ID
--hostgroup-title HOSTGROUP_TITLE Hostgroup title
--id ID
--image IMAGE_NAME Name to search by
--image-id IMAGE_ID
--interface INTERFACE Interface parameters
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
Can be specified multiple times.
--ip IP Not required if using a subnet with DHCP Capsule
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--mac MAC Not required if it's a virtual machine
--managed MANAGED One of true/false, yes/no, 1/0.
--medium MEDIUM_NAME Medium name
--medium-id MEDIUM_ID
--model MODEL_NAME Model name
--model-id MODEL_ID
--name NAME Name to search by
--new-name NEW_NAME
--operatingsystem OPERATINGSYSTEM_TITLE Operating system title
--operatingsystem-id OPERATINGSYSTEM_ID
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--overwrite OVERWRITE One of true/false, yes/no, 1/0.
--owner-id OWNER_ID
--parameters PARAMS Host parameters
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--partition-table PARTITION_TABLE_NAME Partition table name
--partition-table-id PARTITION_TABLE_ID
--progress-report-id PROGRESS_REPORT_ID UUID to track orchestration tasks status, GET
/api/orchestration/:UUID/tasks
--provision-method METHOD Possible value(s): 'build', 'image'
--puppet-ca-proxy-id PUPPET_CA_PROXY_ID
--puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name
--puppet-environment-id PUPPET_ENVIRONMENT_ID
--puppet-proxy-id PUPPET_PROXY_ID
--puppetclass-ids PUPPETCLASS_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--pxe-loader PXE_LOADER DHCP filename option (Grub2 or PXELinux by default)
Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'Grub2 UEFI HTTP', 'Grub2 UEFI HTTPS', 'Grub2 UEFI HTTPS SecureBoot', 'iPXE Embedded', 'iPXE UEFI HTTP', 'iPXE Chain BIOS', 'iPXE Chain UEFI'
--root-password ROOT_PW
--sp-subnet-id SP_SUBNET_ID
--subnet SUBNET_NAME Subnet name
--subnet-id SUBNET_ID
-h, --help Print help2.18.7. hammer discovery reboot
ホストを再起動します。
Usage:
hammer discovery reboot [OPTIONS]
Options:
--all Reboot all discovered hosts
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.18.8. hammer discovery refresh-facts
ホストのファクトをリフレッシュします。
Usage:
hammer discovery refresh-facts [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.19. hammer discovery-rule
検出されたルールを操作します。
Usage:
hammer discovery-rule [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
create Create a discovery rule
delete Delete a rule
info Show a discovery rule
list List all discovery rules
update Update a rule
Options:
-h, --help Print help2.19.1. hammer discovery-rule create
検出ルールを作成します。
Usage:
hammer discovery-rule create [OPTIONS]
Options:
--enabled ENABLED Flag is used for temporary shutdown of rules
One of true/false, yes/no, 1/0.
--hostgroup HOSTGROUP_NAME Hostgroup name
--hostgroup-id HOSTGROUP_ID
--hostgroup-title HOSTGROUP_TITLE Hostgroup title
--hostname HOSTNAME Defines a pattern to assign human-readable hostnames to the matching hosts
--hosts-limit HOSTS_LIMIT
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS Location ID for provisioned hosts
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--max-count MAX_COUNT Enables to limit maximum amount of provisioned hosts per rule
--name NAME Represents rule name shown to the users
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS Organization ID for provisioned hosts
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--priority PRIORITY Puts the rules in order, low numbers go first. Must be greater then zero
--search SEARCH Query to match discovered hosts for the particular rule
-h, --help Print help2.19.2. hammer discovery-rule delete
ルールを削除します。
Usage:
hammer discovery-rule delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.19.3. hammer discovery-rule info
検出ルールを表示します。
Usage:
hammer discovery-rule info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Priority | x | x |
Search | x | x |
Host Group | x | x |
Hosts Limit | x | x |
Enabled | x | x |
Hostname template | x | x |
Hosts/ | x | x |
Locations/ | x | x |
Organizations/ | x | x |
------------------|-----|---------|-----2.19.4. hammer discovery-rule list
検出ルールの一覧を表示します。
Usage:
hammer discovery-rule list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort results
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Paginate results
--per-page PER_PAGE Number of entries per request
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Priority | x | x |
Search | x | x |
Host Group | x | x |
Hosts Limit | x | x |
Enabled | x | x |
------------|-----|---------|-----2.19.5. hammer discovery-rule update
ルールを更新します。
Usage:
hammer discovery-rule update [OPTIONS]
Options:
--enabled ENABLED Flag is used for temporary shutdown of rules
One of true/false, yes/no, 1/0.
--hostgroup HOSTGROUP_NAME Hostgroup name
--hostgroup-id HOSTGROUP_ID
--hostgroup-title HOSTGROUP_TITLE Hostgroup title
--hostname HOSTNAME Defines a pattern to assign human-readable hostnames to the matching hosts
--hosts-limit HOSTS_LIMIT
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS Location ID for provisioned hosts
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--max-count MAX_COUNT Enables to limit maximum amount of provisioned hosts per rule
--name NAME Name to search by
--new-name NEW_NAME Represents rule name shown to the users
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS Organization ID for provisioned hosts
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--priority PRIORITY Puts the rules in order, low numbers go first. Must be greater then zero
--search SEARCH Query to match discovered hosts for the particular rule
-h, --help Print help2.20. hammer docker
Docker コンテナを操作します。
Usage:
hammer docker [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
manifest Manage docker manifests
tag Manage docker tags
Options:
-h, --help Print help2.20.1. hammer docker manifest
docker マニフェストを管理します。
Usage:
hammer docker manifest [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
info Show a docker manifest
list List docker_manifests
Options:
-h, --help Print help2.20.1.1. hammer docker manifest info
docker マニフェストを表示します。
Usage:
hammer docker manifest info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID A docker manifest identifier
--name NAME Name to search by
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
-h, --help Print help
Predefined field sets:
---------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Schema Version | x | x |
Digest | x | x |
Downloaded | x | x |
Tags/Name | x | x |
---------------|-----|---------|-----2.20.1.2. hammer docker manifest list
docker マニフェストの一覧を表示します。
Usage:
hammer docker manifest list [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by
--content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
--content-view-filter-rule CONTENT_VIEW_FILTER_RULE_NAME Name to search by
--content-view-filter-rule-id CONTENT_VIEW_FILTER_RULE_ID Rule identifier
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
--content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--ids IDS Ids to filter content by
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--product PRODUCT_NAME Product name to search by
--product-id PRODUCT_ID Product numeric identifier
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
--search SEARCH Search string
-h, --help Print help
Predefined field sets:
---------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Schema Version | x | x |
Digest | x | x |
Downloaded | x | x |
Tags | x | x |
---------------|-----|---------|-----2.20.2. hammer docker tag
Docker Tags を管理します。
Usage:
hammer docker tag [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
info Show a docker tag
list List docker_tags
Options:
-h, --help Print help2.20.2.1. hammer docker tag info
docker タグを表示します。
Usage:
hammer docker tag info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID A docker tag identifier
--name NAME Name to search by
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
-h, --help Print help
Predefined field sets:
---------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------------------|-----|---------|-----
ID | x | x | x
Tag | x | x | x
Repository ID | x | x |
Docker Manifest ID | x | x |
Docker Manifest Name | x | x |
---------------------|-----|---------|-----2.20.2.2. hammer docker tag list
docker タグを一覧表示します。
Usage:
hammer docker tag list [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by
--content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
--content-view-filter-rule CONTENT_VIEW_FILTER_RULE_NAME Name to search by
--content-view-filter-rule-id CONTENT_VIEW_FILTER_RULE_ID Rule identifier
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
--content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--ids IDS Ids to filter content by
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--product PRODUCT_NAME Product name to search by
--product-id PRODUCT_ID Product numeric identifier
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
--search SEARCH Search string
-h, --help Print help
Predefined field sets:
--------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
--------------|-----|---------|-----
ID | x | x | x
Tag | x | x | x
Repository ID | x | x |
--------------|-----|---------|-----2.21. hammer domain
ドメインを操作します。
Usage:
hammer domain [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
create Create a domain
delete Delete a domain
delete-parameter Delete parameter for a domain
info Show a domain
list List of domains
set-parameter Create or update parameter for a domain
update Update a domain
Options:
-h, --help Print help2.21.1. hammer domain create
ドメインを作成します。
Usage:
hammer domain create [OPTIONS]
Options:
--description DESC Full name describing the domain
--dns DNS_NAME Name of DNS proxy to use within this domain
--dns-id DNS_ID ID of DNS proxy to use within this domain
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME The full DNS domain name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.21.2. hammer domain delete
ドメインを削除します。
Usage:
hammer domain delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Domain name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.21.3. hammer domain delete-parameter
ドメインのパラメーターを削除します。
Usage:
hammer domain delete-parameter [OPTIONS]
Options:
--domain DOMAIN_NAME Domain name
--domain-id DOMAIN_ID Numerical ID or domain name
--name NAME Parameter name
-h, --help Print help2.21.4. hammer domain info
ドメインを表示します。
Usage:
hammer domain info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Numerical ID or domain name
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Domain name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values
One of true/false, yes/no, 1/0.
-h, --help Print help
Predefined field sets:
---------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Description | x | x |
DNS Id | x | x |
Subnets/ | x | x |
Locations/ | x | x |
Organizations/ | x | x |
Parameters/ | x | x |
Created at | x | x |
Updated at | x | x |
---------------|-----|---------|-----2.21.5. hammer domain list
ドメインを一覧表示します。
Usage:
hammer domain list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
--subnet SUBNET_NAME Subnet name
--subnet-id SUBNET_ID
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----
Search / Order fields:
fullname string
location string
location_id integer
name string
organization string
organization_id integer
params text2.21.6. hammer domain set-parameter
ドメインのパラメーターを作成または更新します。
Usage:
hammer domain set-parameter [OPTIONS]
Options:
--domain DOMAIN_NAME Domain name
--domain-id DOMAIN_ID Numerical ID or domain name
--hidden-value HIDDEN_VALUE Should the value be hidden
One of true/false, yes/no, 1/0.
--name NAME Parameter name
--parameter-type PARAMETER_TYPE Type of the parameter
Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
Default: "string"
--value VALUE Parameter value
-h, --help Print help2.21.7. hammer domain update
ドメインを更新します。
Usage:
hammer domain update [OPTIONS]
Options:
--description DESC Full name describing the domain
--dns DNS_NAME Name of DNS proxy to use within this domain
--dns-id DNS_ID ID of DNS proxy to use within this domain
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME Domain name
--new-name NEW_NAME The full DNS domain name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.22. hammer environment
環境を操作します。
Usage:
hammer environment [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
create Create an environment
delete Delete an environment
info Show an environment
list List all environments
sc-params List all smart class parameters
update Update an environment
Options:
-h, --help Print help2.22.1. hammer environment create
環境を作成します。
Usage:
hammer environment create [OPTIONS]
Options:
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.22.2. hammer environment delete
環境を削除します。
Usage:
hammer environment delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Puppet environment name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.22.3. hammer environment info
環境を表示します。
Usage:
hammer environment info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Puppet environment name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
---------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Puppetclasses/ | x | x |
Locations/ | x | x |
Organizations/ | x | x |
Created at | x | x |
Updated at | x | x |
---------------|-----|---------|-----2.22.4. hammer environment list
環境を一覧表示します。
Usage:
hammer environment list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--puppet-class PUPPET_CLASS_NAME Puppet class name
--puppet-class-id PUPPET_CLASS_ID ID of Puppet class
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----
Search / Order fields:
content_view string
lifecycle_environment string
location string
location_id integer
name string
organization string
organization_id integer2.22.5. hammer environment sc-params
スマートクラスパラメーターの一覧を表示します。
Usage:
hammer environment sc-params [OPTIONS]
Options:
--environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment-id instead)
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name
--puppet-environment-id PUPPET_ENVIRONMENT_ID
--search SEARCH Filter results
--show-hidden SHOW_HIDDEN Display hidden values
One of true/false, yes/no, 1/0.
-h, --help Print help
Predefined field sets:
--------------|-----|--------
FIELDS | ALL | DEFAULT
--------------|-----|--------
Id | x | x
Parameter | x | x
Default Value | x | x
Override | x | x
Puppet class | x | x
Class Id | x | x
--------------|-----|--------
Search / Order fields:
avoid_duplicates Values: true, false
environment string
key string
merge_default Values: true, false
merge_overrides Values: true, false
override Values: true, false
parameter string
puppetclass string
puppetclass_name string2.22.6. hammer environment update
環境を更新します。
Usage:
hammer environment update [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--name NAME Puppet environment name
--new-name NEW_NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.23. hammer erratum
エラータを操作します。
Usage:
hammer erratum [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
info Show an erratum
list List errata
Options:
-h, --help Print help2.23.1. hammer erratum info
エラータを表示します。
Usage:
hammer erratum info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID An erratum identifier
--name NAME Name to search by
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
-h, --help Print help
Predefined field sets:
------------------------|-----|--------
FIELDS | ALL | DEFAULT
------------------------|-----|--------
Title | x | x
Version | x | x
Description | x | x
Status | x | x
ID | x | x
Errata ID | x | x
Reboot Suggested | x | x
Updated | x | x
Issued | x | x
Release | x | x
Solution | x | x
Packages | x | x
Module Streams/Name | x | x
Module Streams/Stream | x | x
Module Streams/Packages | x | x
------------------------|-----|--------2.23.2. hammer erratum list
エラータを一覧表示します。
Usage:
hammer erratum list [OPTIONS]
Options:
--available-for AVAILABLE_FOR Return errata that can be added to the specified object. The values
'content_view_version' and 'content_view_filter are supported.
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by
--content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
--content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier
--cve CVE CVE identifier
--errata-restrict-applicable ERRATA_RESTRICT_APPLICABLE Return errata that are applicable to one or more hosts (defaults to true if
Host_id is specified)
One of true/false, yes/no, 1/0.
--errata-restrict-installable ERRATA_RESTRICT_INSTALLABLE Return errata that are upgradable on one or more hosts
One of true/false, yes/no, 1/0.
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--host HOST_NAME Host name
--host-id HOST_ID
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--product PRODUCT_NAME Product name to search by
--product-id PRODUCT_ID Product numeric identifier
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
--search SEARCH Search string
-h, --help Print help
Predefined field sets:
----------|-----|--------
FIELDS | ALL | DEFAULT
----------|-----|--------
ID | x | x
Errata ID | x | x
Type | x | x
Title | x | x
Issued | x | x
Updated | x | x
----------|-----|--------
Search / Order fields:
bug string
cve string
errata_id string
errata_type string
id string
issued date
modular Values: true, false
package string
package_name string
reboot_suggested boolean
repository string
severity string
title string
type string
updated date2.24. hammer export-templates
テンプレートを git repo またはサーバー上のディレクトリーにエクスポートします。
Usage:
hammer export-templates [OPTIONS]
Options:
--branch BRANCH Branch in Git repo.
--dirname DIRNAME The directory within Git repo containing the templates
--filter FILTER Export templates with names matching this regex (case-insensitive; snippets
Are not filtered).
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS REPLACE locations with given ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--metadata-export-mode METADATA_EXPORT_MODE Specify how to handle metadata
Possible value(s): 'refresh', 'keep', 'remove'
--negate NEGATE Negate the prefix (for purging).
One of true/false, yes/no, 1/0.
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS REPLACE organizations with given ids.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--repo REPO Override the default repo from settings.
--verbose BE_VERBOSE Be verbose
One of true/false, yes/no, 1/0.
-h, --help Print help2.25. hammer fact
fact を検索します。
Usage:
hammer fact [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
list List all fact values
Options:
-h, --help Print help2.25.1. hammer fact list
ファクト値の一覧を表示します。
Usage:
hammer fact list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-------|-----|--------
FIELDS | ALL | DEFAULT
-------|-----|--------
Host | x | x
Fact | x | x
Value | x | x
-------|-----|--------
Search / Order fields:
fact string
fact_short_name string
facts string
host string
host.hostgroup string
host_id integer
location string
location_id integer
name string
organization string
organization_id integer
origin string
reported_at datetime
short_name string
type string
value string2.26. hammer file
ファイルを操作します。
Usage:
hammer file [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
info Show a file
list List files
Options:
-h, --help Print help2.26.1. hammer file info
ファイルを表示します。
Usage:
hammer file info [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
--content-view-version-id CONTENT_VIEW_VERSION_ID Content View Version ID
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID A file identifier
--name NAME File name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--product PRODUCT_NAME Product name to search by
--product-id PRODUCT_ID Product numeric identifier
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
-h, --help Print help
Predefined field sets:
---------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------|-----|---------|-----
ID | x | x |
Name | x | x | x
Path | x | x |
UUID | x | x |
Checksum | x | x |
---------|-----|---------|-----2.26.2. hammer file list
ファイルを一覧表示します。
Usage:
hammer file list [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-filter CONTENT_VIEW_FILTER_NAME Name to search by
--content-view-filter-id CONTENT_VIEW_FILTER_ID Filter identifier
--content-view-filter-rule CONTENT_VIEW_FILTER_RULE_NAME Name to search by
--content-view-filter-rule-id CONTENT_VIEW_FILTER_RULE_ID Rule identifier
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--content-view-version CONTENT_VIEW_VERSION_VERSION Content view version number
--content-view-version-id CONTENT_VIEW_VERSION_ID Content view version identifier
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--ids IDS Ids to filter content by
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--product PRODUCT_NAME Product name to search by
--product-id PRODUCT_ID Product numeric identifier
--repository REPOSITORY_NAME Repository name to search by
--repository-id REPOSITORY_ID Repository ID
--search SEARCH Search string
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
ID | x | x |
Name | x | x | x
Path | x | x |
-------|-----|---------|-----2.27. hammer filter
パーミッションフィルターを管理します。
Usage:
hammer filter [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
available-permissions List all permissions
available-resources List available resource types
create Create a filter
delete Delete a filter
info Show a filter
list List all filters
update Update a filter
Options:
-h, --help Print help2.27.1. hammer filter available-permissions
パーミッションの一覧を表示します。
Usage:
hammer filter available-permissions [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--resource-type RESOURCE_TYPE
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
---------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Resource | x | x |
---------|-----|---------|-----
Search / Order fields:
name string
resource_type string2.27.2. hammer filter available-resources
利用可能なリソースタイプを一覧表示します。
Usage:
hammer filter available-resources [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Name | x | x | x
-------|-----|---------|-----2.27.3. hammer filter create
フィルターを作成します。
Usage:
hammer filter create [OPTIONS]
Options:
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--override OVERRIDE One of true/false, yes/no, 1/0.
--permission-ids PERMISSION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--permissions PERMISSION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--role ROLE_NAME User role name
--role-id ROLE_ID
--search SEARCH
-h, --help Print help
Filters inherit organizations and locations from its role by default. This behavior can be changed by setting --override=true.
Therefore options --organization[s|-ids] and --location[s|-ids] are applicable only when the override flag is set.
Overriding organizations and locations:2.27.4. hammer filter delete
フィルターを削除します。
Usage:
hammer filter delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.27.5. hammer filter info
フィルターを表示します。
Usage:
hammer filter info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
---------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------------|-----|---------|-----
Id | x | x | x
Resource type | x | x |
Search | x | x |
Unlimited? | x | x |
Override? | x | x |
Role | x | x |
Permissions | x | x |
Locations/ | x | x |
Organizations/ | x | x |
Created at | x | x |
Updated at | x | x |
---------------|-----|---------|-----2.27.6. hammer filter list
すべてのフィルターの一覧を表示します。
Usage:
hammer filter list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
--------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
--------------|-----|---------|-----
Id | x | x | x
Resource type | x | x |
Search | x | x |
Unlimited? | x | x |
Override? | x | x |
Role | x | x |
Permissions | x | x |
--------------|-----|---------|-----
Search / Order fields:
limited Values: true, false
location string
location_id integer
organization string
organization_id integer
override Values: true, false
permission string
resource string
role string
role_id integer
search text
unlimited Values: true, false2.27.7. hammer filter update
フィルターを更新します。
Usage:
hammer filter update [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-ids LOCATION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location-title LOCATION_TITLE Location title
--location-titles LOCATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--locations LOCATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-ids ORGANIZATION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization-title ORGANIZATION_TITLE Organization title
--organization-titles ORGANIZATION_TITLES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organizations ORGANIZATION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--override OVERRIDE One of true/false, yes/no, 1/0.
--permission-ids PERMISSION_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--permissions PERMISSION_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--role ROLE_NAME User role name
--role-id ROLE_ID
--search SEARCH
-h, --help Print help
Filters inherit organizations and locations from its role by default. This behavior can be changed by setting --override=true.
Therefore options --organization[s|-ids] and --location[s|-ids] are applicable only when the override flag is set.
Overriding organizations and locations:2.28. hammer foreign-input-set
外部入力セットを管理します。
Usage:
hammer foreign-input-set [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
create Create a foreign input set
delete Delete a foreign input set
info Show foreign input set details
list List foreign input sets
update Update a foreign input set
Options:
-h, --help Print help2.28.1. hammer foreign-input-set create
外部入力セットを作成します。
Usage:
hammer foreign-input-set create [OPTIONS]
Options:
--description DESCRIPTION Input set description
--exclude EXCLUDE A comma separated list of input names to be included from the foreign
Template.
--include INCLUDE A comma separated list of input names to be included from the foreign
Template.
--include-all INCLUDE_ALL Include all inputs from the foreign template
One of true/false, yes/no, 1/0.
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--target-template-id TARGET_TEMPLATE_ID Target template ID
--template-id TEMPLATE_ID
-h, --help Print help2.28.2. hammer foreign-input-set delete
外部入力セットを削除します。
Usage:
hammer foreign-input-set delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--template-id TEMPLATE_ID
-h, --help Print help2.28.3. hammer foreign-input-set info
外部入力セット詳細を表示します。
Usage:
hammer foreign-input-set info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--template-id TEMPLATE_ID
-h, --help Print help
Predefined field sets:
---------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
---------------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Target template ID | x | x |
Target template name | x | x |
Include all | x | x |
Include | x | x |
Exclude | x | x |
---------------------|-----|---------|-----2.28.4. hammer foreign-input-set list
外部入力セットを一覧表示します。
Usage:
hammer foreign-input-set list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
--template-id TEMPLATE_ID
-h, --help Print help
Predefined field sets:
---------------------|-----|--------
FIELDS | ALL | DEFAULT
---------------------|-----|--------
ID | x | x
Target template ID | x | x
Target template name | x | x
---------------------|-----|--------2.28.5. hammer foreign-input-set update
外部入力セットを更新します。
Usage:
hammer foreign-input-set update [OPTIONS]
Options:
--description DESCRIPTION Input set description
--exclude EXCLUDE A comma separated list of input names to be included from the foreign
Template.
--id ID
--include INCLUDE A comma separated list of input names to be included from the foreign
Template.
--include-all INCLUDE_ALL Include all inputs from the foreign template
One of true/false, yes/no, 1/0.
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--new-name NEW_NAME
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--target-template-id TARGET_TEMPLATE_ID Target template ID
--template-id TEMPLATE_ID
-h, --help Print help2.29. hammer full-help
全 hammer コマンドの help の表示します。
Usage:
hammer full-help [OPTIONS]
Options:
--md Format output in markdown
-h, --help Print help2.30. hammer global-parameter
グローバルパラメーターを操作します。
Usage:
hammer global-parameter [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
delete Delete a global parameter
list List all global parameters
set Set a global parameter
Options:
-h, --help Print help2.30.1. hammer global-parameter delete
グローバルパラメーターを削除します。
Usage:
hammer global-parameter delete [OPTIONS]
Options:
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Common parameter name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.30.2. hammer global-parameter list
グローバルパラメーターを一覧表示します。
Usage:
hammer global-parameter list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
--show-hidden SHOW_HIDDEN Display hidden values
One of true/false, yes/no, 1/0.
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Name | x | x | x
Value | x | x |
Type | x | x |
-------|-----|---------|-----
Search / Order fields:
domain_name string
host_group_name string
host_name string
key_type string
location_name string
name string
organization_name string
os_name string
parameter_type string
subnet_name text
type string
value text2.30.3. hammer global-parameter set
グローバルパラメーターを設定します。
Usage:
hammer global-parameter set [OPTIONS]
Options:
--hidden-value HIDDEN_VALUE Should the value be hidden
One of true/false, yes/no, 1/0.
--name NAME Parameter name
--parameter-type PARAMETER_TYPE Type of the parameter
Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
Default: "string"
--value VALUE Parameter value
-h, --help Print help2.31. hammer gpg
サーバー上で GPG キーアクションを操作します。
Usage:
hammer gpg [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
create Create a gpg key
delete Destroy a gpg key
info Show a gpg key
list List gpg keys
update Update a repository
Options:
-h, --help Print help2.31.1. hammer gpg create
GPG キーを作成します。
Usage:
hammer gpg create [OPTIONS]
Options:
--key GPG_KEY_FILE GPG Key file
--name NAME Identifier of the gpg key
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.31.2. hammer gpg delete
GPG キーを破棄します。
Usage:
hammer gpg delete [OPTIONS]
Options:
--id ID Gpg key numeric identifier
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.31.3. hammer gpg info
GPG キーを表示します。
Usage:
hammer gpg info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Gpg key numeric identifier
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
--------------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
--------------------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Organization | x | x |
Repositories/ID | x | x |
Repositories/Name | x | x |
Repositories/Content Type | x | x |
Repositories/Product | x | x |
Content | x | x |
--------------------------|-----|---------|-----2.31.4. hammer gpg list
GPG キーを一覧表示します。
Usage:
hammer gpg list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--name NAME Name of the GPG key
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Search string
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
ID | x | x | x
Name | x | x | x
-------|-----|---------|-----
Search / Order fields:
name string
organization_id integer2.31.5. hammer gpg update
リポジトリーを更新します。
Usage:
hammer gpg update [OPTIONS]
Options:
--id ID Gpg key numeric identifier
--key GPG_KEY_FILE GPG Key file
--name NAME Name to search by
--new-name NEW_NAME Identifier of the gpg key
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.32. hammer host
ホストを操作します。
Usage:
hammer host [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
ansible-roles Manage Ansible roles on a host
boot Boot host from specified device
config-reports List all reports
create Create a host
delete Delete a host
delete-parameter Delete parameter for a host
disassociate Disassociate a host
enc-dump Dump host's ENC YAML
errata Manage errata on your hosts
facts List all fact values
info Show a host
interface View and manage host's network interfaces
list List all hosts
package Manage packages on your hosts
package-group Manage package-groups on your hosts
policies-enc View policies ENC for host
puppet-classes List all Puppet classes
puppetrun Force a Puppet agent run on the host
reboot Reboot a host
rebuild-config Rebuild orchestration related configurations for host
reports List all reports
reset Reset a host
sc-params List all smart class parameters
set-parameter Create or append a parameter for a host
smart-variables List all smart variables
start Power a host on
status Get configuration status of host
stop Power a host off
subscription Manage subscription information on your hosts
update Update a host
Options:
-h, --help Print help2.32.1. hammer host ansible-roles
ホストで Ansible ロールを実行します。
Usage:
hammer host ansible-roles [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
assign Assigns Ansible roles to a host
list List all Ansible roles for a host
play Runs all Ansible roles on a host
Options:
-h, --help Print help2.32.1.1. hammer host ansible-roles assign
Ansible ロールをホストに割り当てます。
Usage:
hammer host ansible-roles assign [OPTIONS]
Options:
--ansible-role-ids ANSIBLE_ROLE_IDS Ansible roles to assign to a host
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--ansible-roles ANSIBLE_ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.1.2. hammer host ansible-roles list
ホストの Ansible ロールをすべて一覧表示します。
Usage:
hammer host ansible-roles list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Imported at | x | x |
------------|-----|---------|-----2.32.1.3. hammer host ansible-roles play
ホストに対して全 Ansible ロールを実行します。
Usage:
hammer host ansible-roles play [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.2. hammer host boot
指定されたデバイスからホストを起動します。
Usage:
hammer host boot [OPTIONS]
Options:
--device DEVICE Boot device, valid devices are disk, cdrom, pxe, bios
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.3. hammer host config-reports
レポートの一覧を表示します。
Usage:
hammer host config-reports [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Host id
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-----------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-----------------|-----|---------|-----
Id | x | x | x
Host | x | x |
Last report | x | x |
Applied | x | x |
Restarted | x | x |
Failed | x | x |
Restart Failures | x | x |
Skipped | x | x |
Pending | x | x |
-----------------|-----|---------|-----
Search / Order fields:
applied integer
environment string
eventful Values: true, false
failed integer
failed_restarts integer
host string
host_id integer
hostgroup string
hostgroup_fullname string
hostgroup_title string
last_report datetime
location string
log text
organization string
origin string
pending integer
reported datetime
resource text
restarted integer
skipped integer2.32.4. hammer host create
ホストを作成します。
Usage:
hammer host create [OPTIONS]
Options:
--ansible-role-ids ANSIBLE_ROLE_IDS IDs of associated ansible roles
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--ansible-roles ANSIBLE_ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--architecture ARCHITECTURE_NAME Architecture name
--architecture-id ARCHITECTURE_ID
--ask-root-password ASK_ROOT_PW One of true/false, yes/no, 1/0.
--autoheal AUTOHEAL Sets whether the Host will autoheal subscriptions upon checkin
One of true/false, yes/no, 1/0.
--build BUILD One of true/false, yes/no, 1/0.
--comment COMMENT Additional information about this host
--compute-attributes COMPUTE_ATTRS Compute resource attributes
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--compute-profile COMPUTE_PROFILE_NAME Compute profile name
--compute-profile-id COMPUTE_PROFILE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--config-group-ids CONFIG_GROUP_IDS IDs of associated config groups
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--config-groups CONFIG_GROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--content-source CONTENT_SOURCE_NAME Content Source name
--content-source-id CONTENT_SOURCE_ID
--content-view CONTENT_VIEW_NAME Name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--domain DOMAIN_NAME Domain name
--domain-id DOMAIN_ID Numerical ID or domain name
--enabled ENABLED Include this host within Satellite reporting
One of true/false, yes/no, 1/0.
--environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment-id instead)
--hostgroup HOSTGROUP_NAME Hostgroup name
--hostgroup-id HOSTGROUP_ID
--hostgroup-title HOSTGROUP_TITLE Hostgroup title
--hypervisor-guest-uuids HYPERVISOR_GUEST_UUIDS List of hypervisor guest uuids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--image IMAGE_NAME Name to search by
--image-id IMAGE_ID
--installed-products-attributes INSTALLED_PRODUCTS_ATTRIBUTES List of products installed on the host
Comma separated list of values defined by a schema. See Option details section below.
JSON is acceptable and preferred way for complex parameters
--interface INTERFACE Interface parameters
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
Can be specified multiple times.
--ip IP Not required if using a subnet with DHCP Capsule
--kickstart-repository REPOSITORY_NAME Kickstart repository name
--kickstart-repository-id KICKSTART_REPOSITORY_ID Repository Id associated with the kickstart repo used for provisioning
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID ID of the environment
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--mac MAC Required for managed host that is bare metal, not required if it's a
Virtual machine
--managed MANAGED True/False flag whether a host is managed or unmanaged. Note: this value
Also determines whether several parameters are required or not
One of true/false, yes/no, 1/0.
--medium MEDIUM_NAME Medium name
--medium-id MEDIUM_ID
--model MODEL_NAME Model name
--model-id MODEL_ID
--name NAME
--openscap-proxy-id OPENSCAP_PROXY_ID ID of OpenSCAP Capsule
--operatingsystem OPERATINGSYSTEM_TITLE Operating system title
--operatingsystem-id OPERATINGSYSTEM_ID
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--overwrite OVERWRITE One of true/false, yes/no, 1/0.
Default: "true"
--owner OWNER_LOGIN Login of the owner
--owner-id OWNER_ID ID of the owner
--owner-type OWNER_TYPE Host's owner type
Possible value(s): 'User', 'Usergroup'
--parameters PARAMS Replaces with new host parameters
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--partition-table PARTITION_TABLE_NAME Partition table name
--partition-table-id PARTITION_TABLE_ID
--product PRODUCT_NAME Name to search by
--product-id PRODUCT_ID Product numeric identifier
--progress-report-id PROGRESS_REPORT_ID UUID to track orchestration tasks status, GET
/api/orchestration/:UUID/tasks
--provision-method PROVISION_METHOD The method used to provision the host.
Possible value(s): 'build', 'image', 'bootdisk'
--puppet-ca-proxy PUPPET_CA_PROXY_NAME
--puppet-ca-proxy-id PUPPET_CA_PROXY_ID Puppet CA Capsule ID
--puppet-class-ids PUPPET_CLASS_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--puppet-classes PUPPET_CLASS_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name
--puppet-environment-id PUPPET_ENVIRONMENT_ID
--puppet-proxy PUPPET_PROXY_NAME
--puppet-proxy-id PUPPET_PROXY_ID Puppet Capsule ID
--purpose-addons PURPOSE_ADDONS Sets the system add-ons
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--purpose-role PURPOSE_ROLE Sets the system purpose usage
--purpose-usage PURPOSE_USAGE Sets the system purpose usage
--pxe-loader PXE_LOADER DHCP filename option (Grub2/PXELinux by default)
Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'Grub2 UEFI HTTP', 'Grub2 UEFI HTTPS', 'Grub2 UEFI HTTPS SecureBoot', 'iPXE Embedded', 'iPXE UEFI HTTP', 'iPXE Chain BIOS', 'iPXE Chain UEFI'
--realm REALM_NAME Name to search by
--realm-id REALM_ID Numerical ID or realm name
--release-version RELEASE_VERSION Release version for this Host to use (7Server, 7.1, etc)
--root-password ROOT_PW Required if host is managed and value is not inherited from host group or default password in settings
--service-level SERVICE_LEVEL Service level to be used for autoheal
--subnet SUBNET_NAME Subnet name
--subnet-id SUBNET_ID
--typed-parameters TYPED_PARAMS Replaces with new host parameters (with type support)
Comma separated list of values defined by a schema. See Option details section below.
JSON is acceptable and preferred way for complex parameters
--volume VOLUME Volume parameters
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
Can be specified multiple times.
-h, --help Print help
Option details:
Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value):
--typed-parameters "name=<string>\,value=<string>\,parameter_type=[string|boolean|integer|real|array|hash|yaml|json]\,hidden_value=[true|false|1|0], ... "
--installed-products-attributes "product_id=<string>\,product_name=<string>\,arch=<string>\,version=<string>, ... "
Available keys for --interface:
mac
ip
type Possible values: interface, bmc, bond, bridge
name
subnet_id
domain_id
identifier
managed true/false
primary true/false, each managed hosts needs to have one primary interface.
provision true/false
virtual true/false
For virtual=true:
tag VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for virtual interfaces.
attached_to Identifier of the interface to which this interface belongs, e.g. eth1.
For type=bond:
mode Possible values: balance-rr, active-backup, balance-xor, broadcast, 802.3ad, balance-tlb, balance-alb
attached_devices Identifiers of slave interfaces, e.g. [eth1,eth2]
bond_options
For type=bmc:
provider always IPMI
username
password
Provider specific options:
NOTE: Bold attributes are required.
EC2:
--volume:
--interface:
--compute-attributes:
availability_zone
flavor_id
groups
security_group_ids
managed_ip
GCE:
--volume:
size_gb Volume size in GB, integer value
--interface:
--compute-attributes:
machine_type
network
associate_external_ip
Libvirt:
--volume:
pool_name One of available storage pools
capacity String value, e.g. 10G
allocation
Initial allocation, e.g. 0G
format_type Possible values: raw, qcow2
--interface:
compute_type Possible values: bridge, network
compute_bridge Name of interface according to type
compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000
compute_network
Libvirt instance network, e.g. default
--compute-attributes:
cpus Number of CPUs
memory String, amount of memory, value in bytes
cpu_mode Possible values: default, host-model, host-passthrough
start Boolean (expressed as 0 or 1), whether to start the machine or not
OpenStack:
--volume:
--interface:
--compute-attributes:
availability_zone
boot_from_volume
flavor_ref
image_ref
tenant_id
security_groups
network
oVirt:
--volume:
size_gb Volume size in GB, integer value
storage_domain ID or name of storage domain
bootable Boolean, set 1 for bootable, only one volume can be bootable
preallocate Boolean, set 1 to preallocate
wipe_after_delete Boolean, set 1 to wipe disk after delete
interface Disk interface name, must be ide, virto or virto_scsi
--interface:
compute_name Compute name, e.g. eth0
compute_network Select one of available networks for a cluster, must be an ID
compute_interface Interface type
--compute-attributes:
cluster ID of cluster to use
template Hardware profile to use
cores Integer value, number of cores
sockets Integer value, number of sockets
memory Amount of memory, integer value in bytes
start Boolean, set 1 to start the vm
Rackspace:
--volume:
--interface:
--compute-attributes:
flavor_id
VMware:
--volume:
name
storage_pod Storage Pod ID from VMware
datastore Datastore ID from VMware
mode persistent/independent_persistent/independent_nonpersistent
size_gb Integer number, volume size in GB
thin true/false
eager_zero true/false
controller_key Associated SCSI controller key
--interface:
compute_type Type of the network adapter, for example one of:
VirtualVmxnet3
VirtualE1000
See documentation center for your version of vSphere to find more details about available adapter types:
https://www.vmware.com/support/pubs/
compute_network Network ID from VMware
--compute-attributes:
cluster Cluster ID from VMware
corespersocket Number of cores per socket (applicable to hardware versions < 10 only)
cpus CPU count
memory_mb Integer number, amount of memory in MB
path Path to folder
resource_pool Resource Pool ID from VMware
firmware automatic/bios/efi
guest_id Guest OS ID form VMware
hardware_version Hardware version ID from VMware
memoryHotAddEnabled Must be a 1 or 0, lets you add CPU resources while the machine is on
cpuHotAddEnabled Must be a 1 or 0, lets you add memory resources while the machine is on
add_cdrom Must be a 1 or 0, Add a CD-ROM drive to the virtual machine
annotation Annotation Notes
scsi_controllers List with SCSI controllers definitions
type - ID of the controller from VMware
key - Key of the controller (e.g. 1000)
start Must be a 1 or 0, whether to start the machine or not
AzureRM:
--volume:
--interface:
compute_network Select one of available Azure Subnets, must be an ID
compute_public_ip Public IP (None, Static, Dynamic)
compute_private_ip Static Private IP (expressed as true or false)
--compute-attributes:
resource_group Existing Azure Resource Group of user
vm_size VM Size, eg. Standard_A0 etc.
username The Admin username
password The Admin password
platform OS type eg. Linux
ssh_key_data SSH key for passwordless authentication
os_disk_caching OS disk caching
premium_os_disk Premium OS Disk, Boolean as 0 or 1
script_command Custom Script Command
script_uris Comma seperated file URIs2.32.5. hammer host delete
ホストを削除します。
Usage:
hammer host delete [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.6. hammer host delete-parameter
ホストのパラメーターを削除します。
Usage:
hammer host delete-parameter [OPTIONS]
Options:
--host HOST_NAME Host name
--host-id HOST_ID
--name NAME Parameter name
-h, --help Print help2.32.7. hammer host disassociate
ホストの関連付けを解除します。
Usage:
hammer host disassociate [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.8. hammer host enc-dump
ホストの ENC YAML をダンプします。
Usage:
hammer host enc-dump [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.9. hammer host errata
お使いのホストに関するエラータを管理します。
Usage:
hammer host errata [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
apply Schedule errata for installation
info Retrieve a single errata for a host
list List errata available for the content host
recalculate Force regenerate applicability.
Options:
-h, --help Print help2.32.9.1. hammer host errata apply
エラータのインストールをスケジュールします。
Usage:
hammer host errata apply [OPTIONS]
Options:
--async Do not wait for the task
--errata-ids ERRATA_IDS List of Errata ids to install
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--host HOST_NAME Host name
--host-id HOST_ID
--ids IDS List of errata ids to perform an action on, (ex: RHSA-2019:1168)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--search SEARCH Search string for erratum to perform an action on
-h, --help Print help2.32.9.2. hammer host errata info
ホストに関するエラータを 1 つ取得します。
Usage:
hammer host errata info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--host HOST_NAME Host name
--host-id HOST_ID
--id ID Errata id of the erratum (RHSA-2012:108)
--name NAME Name to search by
-h, --help Print help
Predefined field sets:
------------------------|-----|--------
FIELDS | ALL | DEFAULT
------------------------|-----|--------
Title | x | x
Version | x | x
Description | x | x
Status | x | x
ID | x | x
Errata ID | x | x
Reboot Suggested | x | x
Updated | x | x
Issued | x | x
Release | x | x
Solution | x | x
Packages | x | x
Module Streams/Name | x | x
Module Streams/Stream | x | x
Module Streams/Packages | x | x
------------------------|-----|--------2.32.9.3. hammer host errata list
コンテンツホストに利用可能なエラータを一覧表示します。
Usage:
hammer host errata list [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--host HOST_NAME Host name
--host-id HOST_ID
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Search string
-h, --help Print help
Predefined field sets:
------------|-----|--------
FIELDS | ALL | DEFAULT
------------|-----|--------
ID | x | x
Erratum ID | x | x
Type | x | x
Title | x | x
Installable | x | x
------------|-----|--------2.32.9.4. hammer host errata recalculate
適用可能なエラータを強制的に再生成します。
Usage:
hammer host errata recalculate [OPTIONS]
Options:
--async Do not wait for the task
--host HOST_NAME Host name
--host-id HOST_ID
-h, --help Print help2.32.10. hammer host facts
ファクト値の一覧を表示します。
Usage:
hammer host facts [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-------|-----|--------
FIELDS | ALL | DEFAULT
-------|-----|--------
Fact | x | x
Value | x | x
-------|-----|--------
Search / Order fields:
fact string
fact_short_name string
facts string
host string
host.hostgroup string
host_id integer
location string
location_id integer
name string
organization string
organization_id integer
origin string
reported_at datetime
short_name string
type string
value string2.32.11. hammer host info
ホストを表示します。
Usage:
hammer host info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--show-hidden-parameters SHOW_HIDDEN_PARAMETERS Display hidden parameter values
One of true/false, yes/no, 1/0.
-h, --help Print help
Predefined field sets:
--------------------------------------------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
--------------------------------------------------------|-----|---------|-----
Id | x | x | x
UUID | x | x |
Name | x | x | x
Organization | x | x |
Location | x | x |
Host Group | x | x |
Compute Resource | x | x |
Compute Profile | x | x |
Puppet Environment | x | x |
Puppet CA Proxy | x | x |
Puppet Master Proxy | x | x |
Cert name | x | x |
Managed | x | x |
Installed at | x | x |
Last report | x | x |
Uptime (seconds) | x | x |
Status/Global Status | x | x |
Status/Build Status | x | x |
Network/IPv4 address | x | x |
Network/IPv6 address | x | x |
Network/MAC | x | x |
Network/Subnet ipv4 | x | x |
Network/Subnet ipv6 | x | x |
Network/Domain | x | x |
Network/Service provider/SP Name | x | x |
Network/Service provider/SP IP | x | x |
Network/Service provider/SP MAC | x | x |
Network/Service provider/SP Subnet | x | x |
Network interfaces/Id | x | x |
Network interfaces/Identifier | x | x |
Network interfaces/Type | x | x |
Network interfaces/MAC address | x | x |
Network interfaces/IPv4 address | x | x |
Network interfaces/IPv6 address | x | x |
Network interfaces/FQDN | x | x |
Operating system/Architecture | x | x |
Operating system/Operating System | x | x |
Operating system/Build | x | x |
Operating system/Medium | x | x |
Operating system/Partition Table | x | x |
Operating system/PXE Loader | x | x |
Operating system/Custom partition table | x | x |
Operating system/Image | x | x |
Operating system/Image file | x | x |
Operating system/Use image | x | x |
Parameters/ | x | x |
All parameters/ | x | x |
Additional info/Owner | x | x |
Additional info/Owner Id | x | x |
Additional info/Owner Type | x | x |
Additional info/Enabled | x | x |
Additional info/Model | x | x |
Additional info/Comment | x | x |
OpenSCAP Proxy | x | x |
Content Information/Content View/ID | x | x |
Content Information/Content View/Name | x | x |
Content Information/Lifecycle Environment/ID | x | x |
Content Information/Lifecycle Environment/Name | x | x |
Content Information/Content Source/ID | x | x |
Content Information/Content Source/Name | x | x |
Content Information/Kickstart Repository/ID | x | x |
Content Information/Kickstart Repository/Name | x | x |
Content Information/Applicable Packages | x | x |
Content Information/Upgradable Packages | x | x |
Content Information/Applicable Errata/Enhancement | x | x |
Content Information/Applicable Errata/Bug Fix | x | x |
Content Information/Applicable Errata/Security | x | x |
Subscription Information/UUID | x | x |
Subscription Information/Last Checkin | x | x |
Subscription Information/Release Version | x | x |
Subscription Information/Autoheal | x | x |
Subscription Information/Registered To | x | x |
Subscription Information/Registered At | x | x |
Subscription Information/Registered by Activation Keys/ | x | x |
Subscription Information/System Purpose/Service Level | x | x |
Subscription Information/System Purpose/Purpose Usage | x | x |
Subscription Information/System Purpose/Purpose Role | x | x |
Subscription Information/System Purpose/Purpose Addons | x | x |
Host Collections/Id | x | x |
Host Collections/Name | x | x |
--------------------------------------------------------|-----|---------|-----2.32.12. hammer host interface
ホストのネットワークインターフェースを表示および管理します。
Usage:
hammer host interface [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
create Create an interface on a host
delete Delete a host's interface
info Show an interface for host
list List all interfaces for host
update Update a host's interface
Options:
-h, --help Print help2.32.12.1. hammer host interface create
ホストにインターフェースを作成します。
Usage:
hammer host interface create [OPTIONS]
Options:
--attached-devices ATTACHED_DEVICES Identifiers of attached interfaces, e.g. `['eth1',
'eth2']`. For bond interfaces those are the slaves. Only for bond
And bridges interfaces.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--attached-to ATTACHED_TO Identifier of the interface to which this interface belongs, e.g. eth1.
Only for virtual interfaces.
--bond-options BOND_OPTIONS Space separated options, e.g. miimon=100. Only for bond interfaces.
--compute-attributes COMPUTE_ATTRS Compute resource specific attributes
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--domain DOMAIN_NAME Domain name
--domain-id DOMAIN_ID Numerical ID or domain name
--host HOST_NAME Host name
--host-id HOST_ID
--identifier IDENTIFIER Device identifier, e.g. eth0 or eth1.1
--ip IP IPv4 address of interface
--ip6 IP6 IPv6 address of interface
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--mac MAC MAC address of interface. Required for managed interfaces on bare metal.
--managed MANAGED Should this interface be managed via DHCP and DNS capsule and should it be
Configured during provisioning?
One of true/false, yes/no, 1/0.
--mode MODE Bond mode of the interface, e.g. balance-rr. Only for bond interfaces.
Possible value(s): 'balance-rr', 'active-backup', 'balance-xor', 'broadcast', '802.3ad', 'balance-tlb', 'balance-alb'
--mtu MTU MTU, this attribute has precedence over the subnet MTU.
--name NAME Interface's DNS name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--password PASSWORD Only for BMC interfaces.
--primary Should this interface be used for constructing the FQDN of the host? Each managed hosts needs to have one primary interface
--provider PROVIDER Interface provider, e.g. IPMI. Only for BMC interfaces.
Possible value(s): 'IPMI', 'SSH'
--provision Should this interface be used for TFTP of PXELinux (or SSH for image-based hosts)? Each managed hosts needs to have one provision interface
--subnet SUBNET_NAME Subnet name
--subnet-id SUBNET_ID
--subnet6-id SUBNET6_ID Satellite subnet ID of IPv6 interface
--tag TAG VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for
Virtual interfaces.
--type TYPE Interface type, e.g. bmc. Default is interface
Possible value(s): 'interface', 'bmc', 'bond', 'bridge'
--username USERNAME Only for BMC interfaces.
--virtual VIRTUAL Alias or VLAN device
One of true/false, yes/no, 1/0.
-h, --help Print help2.32.12.2. hammer host interface delete
ホストのインターフェースを削除します。
Usage:
hammer host interface delete [OPTIONS]
Options:
--host HOST_NAME Host name
--host-id HOST_ID
--id ID ID of interface
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.12.3. hammer host interface info
ホストのインターフェースを表示します。
Usage:
hammer host interface info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--host HOST_NAME Host name
--host-id HOST_ID
--id ID ID or name of interface
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
----------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
----------------------|-----|---------|-----
Id | x | x | x
Identifier | x | x |
Type | x | x |
MAC address | x | x |
IP address | x | x |
DNS name | x | x |
Subnet | x | x |
Domain | x | x |
Managed | x | x |
Primary | x | x |
Provision | x | x |
Virtual | x | x |
Tag | x | x |
Attached to | x | x |
BMC/Username | x | x |
BMC/Provider | x | x |
Bond/Mode | x | x |
Bond/Attached devices | x | x |
Bond/Bond options | x | x |
----------------------|-----|---------|-----2.32.12.4. hammer host interface list
ホストのインターフェース一覧を表示します。
Usage:
hammer host interface list [OPTIONS]
Options:
--domain DOMAIN_NAME Domain name
--domain-id DOMAIN_ID Numerical ID or domain name
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--host HOST_NAME Host name
--host-id HOST_ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--subnet SUBNET_NAME Subnet name
--subnet-id SUBNET_ID
-h, --help Print help
Predefined field sets:
------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------|-----|---------|-----
Id | x | x | x
Identifier | x | x |
Type | x | x |
MAC address | x | x |
IP address | x | x |
DNS name | x | x |
------------|-----|---------|-----2.32.12.5. hammer host interface update
ホストのインターフェースを更新します。
Usage:
hammer host interface update [OPTIONS]
Options:
--attached-devices ATTACHED_DEVICES Identifiers of attached interfaces, e.g. `['eth1',
'eth2']`. For bond interfaces those are the slaves. Only for bond
And bridges interfaces.
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--attached-to ATTACHED_TO Identifier of the interface to which this interface belongs, e.g. eth1.
Only for virtual interfaces.
--bond-options BOND_OPTIONS Space separated options, e.g. miimon=100. Only for bond interfaces.
--compute-attributes COMPUTE_ATTRS Compute resource specific attributes
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--domain DOMAIN_NAME Domain name
--domain-id DOMAIN_ID Numerical ID or domain name
--host HOST_NAME Host name
--host-id HOST_ID
--id ID ID of interface
--identifier IDENTIFIER Device identifier, e.g. eth0 or eth1.1
--ip IP IPv4 address of interface
--ip6 IP6 IPv6 address of interface
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--mac MAC MAC address of interface. Required for managed interfaces on bare metal.
--managed MANAGED Should this interface be managed via DHCP and DNS capsule and should it be
Configured during provisioning?
One of true/false, yes/no, 1/0.
--mode MODE Bond mode of the interface, e.g. balance-rr. Only for bond interfaces.
Possible value(s): 'balance-rr', 'active-backup', 'balance-xor', 'broadcast', '802.3ad', 'balance-tlb', 'balance-alb'
--mtu MTU MTU, this attribute has precedence over the subnet MTU.
--name NAME Interface's DNS name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--password PASSWORD Only for BMC interfaces.
--primary Should this interface be used for constructing the FQDN of the host? Each managed hosts needs to have one primary interface
--provider PROVIDER Interface provider, e.g. IPMI. Only for BMC interfaces.
Possible value(s): 'IPMI', 'SSH'
--provision Should this interface be used for TFTP of PXELinux (or SSH for image-based hosts)? Each managed hosts needs to have one provision interface
--subnet SUBNET_NAME Subnet name
--subnet-id SUBNET_ID
--subnet6-id SUBNET6_ID Satellite subnet ID of IPv6 interface
--tag TAG VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for
Virtual interfaces.
--type TYPE Interface type, e.g. bmc. Default is interface
Possible value(s): 'interface', 'bmc', 'bond', 'bridge'
--username USERNAME Only for BMC interfaces.
--virtual VIRTUAL Alias or VLAN device
One of true/false, yes/no, 1/0.
-h, --help Print help2.32.13. hammer host list
ホストを一覧表示します。
Usage:
hammer host list [OPTIONS]
Options:
--environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment-id instead)
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--hostgroup HOSTGROUP_NAME Hostgroup name
--hostgroup-id HOSTGROUP_ID
--hostgroup-title HOSTGROUP_TITLE Hostgroup title
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name
--puppet-environment-id PUPPET_ENVIRONMENT_ID
--search SEARCH Filter results
--thin THIN Only list ID and name of hosts
One of true/false, yes/no, 1/0.
-h, --help Print help
Predefined field sets:
-----------------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-----------------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Operating System | x | x |
Host Group | x | x |
IP | x | x |
MAC | x | x |
Global Status | x | x |
Organization | x | |
Location | x | |
Additional Information | x | |
Content View | x | x |
Lifecycle Environment | x | x |
Security | x | |
Bugfix | x | |
Enhancement | x | |
-----------------------|-----|---------|-----
Search / Order fields:
activation_key string
activation_key_id string
addon string
addons_status Values: mismatched, matched, not_specified
ansible_role string
applicable_errata string
applicable_rpms string
architecture string
autoheal boolean
boot_time
build Values: true, false
class string
comment text
compute_resource string
compute_resource_id integer
config_group string
content_source string
content_view string
content_view_id integer
created_at datetime
domain string
domain_id integer
environment string
errata_status Values: security_needed, errata_needed, updated, unknown
execution_status Values: ok, error
facts string
global_status Values: ok, warning, error
has_ip string
has_mac string
hostgroup string
hostgroup_fullname string
hostgroup_id integer
hostgroup_name string
hostgroup_title string
hypervisor Values: true, false
hypervisor_host string
image string
installable_errata string
installed_at datetime
ip string
job_invocation.id string
job_invocation.result Values: cancelled, failed, pending, success
last_checkin datetime
last_report datetime
lifecycle_environment string
lifecycle_environment_id integer
location string
location_id integer
mac string
managed Values: true, false
model string
name string
organization string
organization_id integer
origin string
os string
os_description string
os_id integer
os_major string
os_minor string
os_title string
owner string
owner_id integer
owner_type string
params string
params_name string
parent_hostgroup string
puppet_ca string
puppet_proxy_id integer
puppetmaster string
purpose_status Values: mismatched, matched, not_specified
realm string
realm_id integer
registered_at datetime
registered_through string
release_version string
role text
role_status Values: mismatched, matched, not_specified
service_level string
sla_status Values: mismatched, matched, not_specified
smart_proxy string
status.applied integer
status.enabled Values: true, false
status.failed integer
status.failed_restarts integer
status.interesting Values: true, false
status.pending integer
status.restarted integer
status.skipped integer
subnet string
subnet.name text
subnet6 string
subnet6.name text
subscription_id string
subscription_name string
subscription_status Values: valid, partial, invalid, unknown, unsubscribed_hypervisor
subscription_uuid string
trace_status Values: reboot_needed, process_restart_needed, updated
upgradable_rpms string
usage text
usage_status Values: mismatched, matched, not_specified
user.firstname string
user.lastname string
user.login string
user.mail string
usergroup string
usergroup.name string
uuid string2.32.14. hammer host package
お使いのホストのパッケージを管理します。
Usage:
hammer host package [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
install Install packages remotely
list List packages installed on the host
remove Uninstall packages remotely
upgrade Update packages remotely
upgrade-all Update packages remotely
Options:
-h, --help Print help2.32.14.1. hammer host package install
パッケージをリモートからインストールします。
Usage:
hammer host package install [OPTIONS]
Options:
--async Do not wait for the task
--host HOST_NAME Host name
--host-id HOST_ID
--packages PACKAGES List of package names
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.32.14.2. hammer host package list
ホストにインストールされているパッケージの一覧を表示します。
Usage:
hammer host package list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--host HOST_NAME Host name
--host-id HOST_ID
--order ORDER Sort field and order, eg. 'id DESC'
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Search string
-h, --help Print help
Predefined field sets:
-------|-----|--------
FIELDS | ALL | DEFAULT
-------|-----|--------
NVRA | x | x
-------|-----|--------
Search / Order fields:
name string
nvra string2.32.14.3. hammer host package remove
パッケージをリモートからアンインストールします。
Usage:
hammer host package remove [OPTIONS]
Options:
--async Do not wait for the task
--host HOST_NAME Host name
--host-id HOST_ID
--packages PACKAGES List of package names
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.32.14.4. hammer host package upgrade
パッケージをリモートから更新します。
Usage:
hammer host package upgrade [OPTIONS]
Options:
--async Do not wait for the task
--host HOST_NAME Host name
--host-id HOST_ID
--packages PACKAGES List of packages names
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.32.14.5. hammer host package upgrade-all
パッケージをリモートから更新します。
Usage:
hammer host package upgrade-all [OPTIONS]
Options:
--async Do not wait for the task
--host HOST_NAME Host name
--host-id HOST_ID
-h, --help Print help2.32.15. hammer host package-group
お使いのホストのパッケージグループを管理します。
Usage:
hammer host package-group [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
install Install packages remotely
remove Uninstall packages remotely
Options:
-h, --help Print help2.32.15.1. hammer host package-group install
パッケージをリモートからインストールします。
Usage:
hammer host package-group install [OPTIONS]
Options:
--async Do not wait for the task
--groups GROUPS List of package group names
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--host HOST_NAME Host name
--host-id HOST_ID
-h, --help Print help2.32.15.2. hammer host package-group remove
パッケージをリモートからアンインストールします。
Usage:
hammer host package-group remove [OPTIONS]
Options:
--async Do not wait for the task
--groups GROUPS List of package group names
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--host HOST_NAME Host name
--host-id HOST_ID
-h, --help Print help2.32.16. hammer host policies-enc
ホストのポリシー ENC を表示します。
Usage:
hammer host policies-enc [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID The identifier of the host
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help
Predefined field sets:
------------------------|-----|--------
FIELDS | ALL | DEFAULT
------------------------|-----|--------
Id | x | x
Profile Id | x | x
Content path | x | x
Content download path | x | x
Tailoring path | x | x
Tailoring download path | x | x
Day of month | x | x
Hour | x | x
Minute | x | x
Month | x | x
Week | x | x
------------------------|-----|--------2.32.17. hammer host puppet-classes
Puppet クラスの一覧を表示します。
Usage:
hammer host puppet-classes [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--host HOST_NAME Host name
--host-id HOST_ID
--location-id LOCATION_ID Set the current location context for the request
--order ORDER Sort field and order, eg. ‘id DESC’
--organization-id ORGANIZATION_ID Set the current organization context for the request
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-------|-----|---------|-----
Id | x | x | x
Name | x | x | x
-------|-----|---------|-----
Search / Order fields:
config_group string
environment string
host string
hostgroup string
key string
location string
name string
organization string2.32.18. hammer host puppetrun
ホストで Puppet エージェントを強制的に実行します。
Usage:
hammer host puppetrun [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Name to search by
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.19. hammer host reboot
ホストを再起動します。
Usage:
hammer host reboot [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.20. hammer host rebuild-config
ホスト向けオーケストレーション関連設定を再ビルドします。
Usage:
hammer host rebuild-config [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--only ONLY Limit rebuild steps, valid steps are DHCP, DNS, TFTP
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.21. hammer host reports
レポートの一覧を表示します。
Usage:
hammer host reports [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Host id
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
-h, --help Print help
Predefined field sets:
-----------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-----------------|-----|---------|-----
Id | x | x | x
Host | x | x |
Last report | x | x |
Applied | x | x |
Restarted | x | x |
Failed | x | x |
Restart Failures | x | x |
Skipped | x | x |
Pending | x | x |
-----------------|-----|---------|-----
Search / Order fields:
applied integer
environment string
eventful Values: true, false
failed integer
failed_restarts integer
host string
host_id integer
hostgroup string
hostgroup_fullname string
hostgroup_title string
last_report datetime
location string
log text
organization string
origin string
pending integer
reported datetime
resource text
restarted integer
skipped integer2.32.22. hammer host reset
ホストをリセットします。
Usage:
hammer host reset [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.23. hammer host sc-params
スマートクラスパラメーターの一覧を表示します。
Usage:
hammer host sc-params [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--host HOST_NAME Host name
--host-id HOST_ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
--show-hidden SHOW_HIDDEN Display hidden values
One of true/false, yes/no, 1/0.
-h, --help Print help
Predefined field sets:
--------------|-----|--------
FIELDS | ALL | DEFAULT
--------------|-----|--------
Id | x | x
Parameter | x | x
Default Value | x | x
Override | x | x
Puppet class | x | x
Class Id | x | x
--------------|-----|--------
Search / Order fields:
avoid_duplicates Values: true, false
environment string
key string
merge_default Values: true, false
merge_overrides Values: true, false
override Values: true, false
parameter string
puppetclass string
puppetclass_name string2.32.24. hammer host set-parameter
ホストのパラメーターを作成または追加します。
Usage:
hammer host set-parameter [OPTIONS]
Options:
--hidden-value HIDDEN_VALUE Should the value be hidden
One of true/false, yes/no, 1/0.
--host HOST_NAME Host name
--host-id HOST_ID
--name NAME Parameter name
--parameter-type PARAMETER_TYPE Type of the parameter
Possible value(s): 'string', 'boolean', 'integer', 'real', 'array', 'hash', 'yaml', 'json'
Default: "string"
--value VALUE Parameter value
-h, --help Print help2.32.25. hammer host smart-variables
スマート変数の一覧を表示します。
Usage:
hammer host smart-variables [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--host HOST_NAME Host name
--host-id HOST_ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
--show-hidden SHOW_HIDDEN Display hidden values
One of true/false, yes/no, 1/0.
-h, --help Print help
Predefined field sets:
--------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
--------------|-----|---------|-----
Id | x | x | x
Variable | x | x | x
Default Value | x | x |
Type | x | x |
Puppet class | x | x |
Class Id | x | x |
--------------|-----|---------|-----
Search / Order fields:
avoid_duplicates Values: true, false
key string
merge_default Values: true, false
merge_overrides Values: true, false
override Values: true, false
parameter string
puppetclass string2.32.26. hammer host start
ホストのパワーをオンにします。
Usage:
hammer host start [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.27. hammer host status
ホストの設定ステータスを取得します。
Usage:
hammer host status [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.28. hammer host stop
ホストのパワーをオフにします。
Usage:
hammer host stop [OPTIONS]
Options:
--force Force turning off a host
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Host name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
-h, --help Print help2.32.29. hammer host subscription
お使いのホストのサブスクリプション情報を管理します。
Usage:
hammer host subscription [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
attach Add a subscription to a host
auto-attach Trigger an auto-attach of subscriptions
content-override Override product content defaults
product-content List associated products
register Register a host with subscription and information
remove
unregister Unregister the host as a subscription consumer
Options:
-h, --help Print help2.32.29.1. hammer host subscription attach
ホストにサブスクリプションを追加します。
Usage:
hammer host subscription attach [OPTIONS]
Options:
--host HOST_NAME Host name
--host-id HOST_ID
--quantity Quantity Quantity of this subscriptions to add. Defaults to 1
--subscription-id SUBSCRIPTION_ID ID of subscription
-h, --help Print help2.32.29.2. hammer host subscription auto-attach
サブスクリプションの自動割り当てをトリガーします。
Usage:
hammer host subscription auto-attach [OPTIONS]
Options:
--host HOST_NAME Host name
--host-id HOST_ID
-h, --help Print help2.32.29.3. hammer host subscription content-override
製品コンテンツのデフォルトを上書きします。
Usage:
hammer host subscription content-override [OPTIONS]
Options:
--content-label CONTENT_LABEL Label of the content
--host HOST_NAME Host name
--host-id HOST_ID
--override-name OVERRIDE_NAME Override parameter key or name.
To enable or disable a repo select 'enabled'.
Default value: enabled
Default: "enabled"
--remove Remove a content override
--value VALUE Override value. Note for repo enablement you can use a boolean value
-h, --help Print help2.32.29.4. hammer host subscription product-content
関連付けられた製品を一覧表示します。
Usage:
hammer host subscription product-content [OPTIONS]
Options:
--content-access-mode-all CONTENT_ACCESS_MODE_ALL Get all content available, not just that provided by subscriptions
One of true/false, yes/no, 1/0.
--content-access-mode-env CONTENT_ACCESS_MODE_ENV Limit content to just that available in the host's content view version
One of true/false, yes/no, 1/0.
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--host HOST_NAME Host name
--host-id HOST_ID
-h, --help Print help
Predefined field sets:
-----------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
-----------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Type | x | x |
URL | x | x |
GPG Key | x | x |
Label | x | x |
Default Enabled? | x | x |
Override | x | x |
-----------------|-----|---------|-----2.32.29.5. hammer host subscription register
サブスクリプションと情報を使用してホストを登録します。
Usage:
hammer host subscription register [OPTIONS]
Options:
--content-view CONTENT_VIEW_NAME Content view name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--environment ENVIRONMENT_NAME Lifecycle environment name to search by (--environment is deprecated: Use --lifecycle-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --lifecycle-environment-id instead)
--hypervisor-guest-uuids HYPERVISOR_GUEST_UUIDS UUIDs of the virtual guests from the host's hypervisor
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID ID of the environment
--name NAME Name of the host
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID to search by
--organization-label ORGANIZATION_LABEL Organization label to search by
--release-version RELEASE_VERSION Release version of the content host
--service-level SERVICE_LEVEL A service level for auto-healing process, e.g. SELF-SUPPORT
--uuid UUID UUID to use for registered host, random uuid is generated if not provided
-h, --help Print help2.32.29.6. hammer host subscription remove
Usage:
hammer host subscription remove [OPTIONS]
Options:
--host HOST_NAME Host name
--host-id HOST_ID
--quantity Quantity Remove the first instance of a subscription with matching id and quantity
--subscription-id SUBSCRIPTION_ID ID of subscription
-h, --help Print help2.32.29.7. hammer host subscription unregister
ホストからサブスクリプションの登録を解除します。
Usage:
hammer host subscription unregister [OPTIONS]
Options:
--host HOST_NAME Host name
--host-id HOST_ID
-h, --help Print help2.32.30. hammer host update
ホストを更新します。
Usage:
hammer host update [OPTIONS]
Options:
--ansible-role-ids ANSIBLE_ROLE_IDS IDs of associated ansible roles
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--ansible-roles ANSIBLE_ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--architecture ARCHITECTURE_NAME Architecture name
--architecture-id ARCHITECTURE_ID
--ask-root-password ASK_ROOT_PW One of true/false, yes/no, 1/0.
--autoheal AUTOHEAL Sets whether the Host will autoheal subscriptions upon checkin
One of true/false, yes/no, 1/0.
--build BUILD One of true/false, yes/no, 1/0.
--comment COMMENT Additional information about this host
--compute-attributes COMPUTE_ATTRS Compute resource attributes
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--compute-profile COMPUTE_PROFILE_NAME Compute profile name
--compute-profile-id COMPUTE_PROFILE_ID
--compute-resource COMPUTE_RESOURCE_NAME Compute resource name
--compute-resource-id COMPUTE_RESOURCE_ID
--config-group-ids CONFIG_GROUP_IDS IDs of associated config groups
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--config-groups CONFIG_GROUP_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--content-source CONTENT_SOURCE_NAME Content Source name
--content-source-id CONTENT_SOURCE_ID
--content-view CONTENT_VIEW_NAME Name to search by
--content-view-id CONTENT_VIEW_ID Content view numeric identifier
--domain DOMAIN_NAME Domain name
--domain-id DOMAIN_ID Numerical ID or domain name
--enabled ENABLED Include this host within Satellite reporting
One of true/false, yes/no, 1/0.
--environment ENVIRONMENT_NAME Environment name (--environment is deprecated: Use --puppet-environment instead)
--environment-id ENVIRONMENT_ID (--environment-id is deprecated: Use --puppet-environment-id instead)
--hostgroup HOSTGROUP_NAME Hostgroup name
--hostgroup-id HOSTGROUP_ID
--hostgroup-title HOSTGROUP_TITLE Hostgroup title
--hypervisor-guest-uuids HYPERVISOR_GUEST_UUIDS List of hypervisor guest uuids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--image IMAGE_NAME Name to search by
--image-id IMAGE_ID
--installed-products-attributes INSTALLED_PRODUCTS_ATTRIBUTES List of products installed on the host
Comma separated list of values defined by a schema. See Option details section below.
JSON is acceptable and preferred way for complex parameters
--interface INTERFACE Interface parameters
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
Can be specified multiple times.
--ip IP Not required if using a subnet with DHCP Capsule
--kickstart-repository REPOSITORY_NAME Kickstart repository name
--kickstart-repository-id KICKSTART_REPOSITORY_ID Repository Id associated with the kickstart repo used for provisioning
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID ID of the environment
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--mac MAC Required for managed host that is bare metal, not required if it's a
Virtual machine
--managed MANAGED True/False flag whether a host is managed or unmanaged. Note: this value
Also determines whether several parameters are required or not
One of true/false, yes/no, 1/0.
--medium MEDIUM_NAME Medium name
--medium-id MEDIUM_ID
--model MODEL_NAME Model name
--model-id MODEL_ID
--name NAME Host name
--new-location NEW_LOCATION_NAME Location name
--new-location-id NEW_LOCATION_ID
--new-location-title NEW_LOCATION_TITLE Location title
--new-name NEW_NAME
--new-organization NEW_ORGANIZATION_NAME Organization name
--new-organization-id NEW_ORGANIZATION_ID Organization ID
--new-organization-title NEW_ORGANIZATION_TITLE Organization title
--openscap-proxy-id OPENSCAP_PROXY_ID ID of OpenSCAP Capsule
--operatingsystem OPERATINGSYSTEM_TITLE Operating system title
--operatingsystem-id OPERATINGSYSTEM_ID
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--overwrite OVERWRITE One of true/false, yes/no, 1/0.
--owner OWNER_LOGIN Login of the owner
--owner-id OWNER_ID ID of the owner
--owner-type OWNER_TYPE Host's owner type
Possible value(s): 'User', 'Usergroup'
--parameters PARAMS Replaces with new host parameters
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
--partition-table PARTITION_TABLE_NAME Partition table name
--partition-table-id PARTITION_TABLE_ID
--product PRODUCT_NAME Name to search by
--product-id PRODUCT_ID Product numeric identifier
--progress-report-id PROGRESS_REPORT_ID UUID to track orchestration tasks status, GET
/api/orchestration/:UUID/tasks
--provision-method PROVISION_METHOD The method used to provision the host.
Possible value(s): 'build', 'image', 'bootdisk'
--puppet-ca-proxy PUPPET_CA_PROXY_NAME
--puppet-ca-proxy-id PUPPET_CA_PROXY_ID Puppet CA Capsule ID
--puppet-class-ids PUPPET_CLASS_IDS Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--puppet-classes PUPPET_CLASS_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--puppet-environment PUPPET_ENVIRONMENT_NAME Puppet environment name
--puppet-environment-id PUPPET_ENVIRONMENT_ID
--puppet-proxy PUPPET_PROXY_NAME
--puppet-proxy-id PUPPET_PROXY_ID Puppet Capsule ID
--purpose-addons PURPOSE_ADDONS Sets the system add-ons
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--purpose-role PURPOSE_ROLE Sets the system purpose usage
--purpose-usage PURPOSE_USAGE Sets the system purpose usage
--pxe-loader PXE_LOADER DHCP filename option (Grub2/PXELinux by default)
Possible value(s): 'None', 'PXELinux BIOS', 'PXELinux UEFI', 'Grub UEFI', 'Grub2 BIOS', 'Grub2 ELF', 'Grub2 UEFI', 'Grub2 UEFI SecureBoot', 'Grub2 UEFI HTTP', 'Grub2 UEFI HTTPS', 'Grub2 UEFI HTTPS SecureBoot', 'iPXE Embedded', 'iPXE UEFI HTTP', 'iPXE Chain BIOS', 'iPXE Chain UEFI'
--realm REALM_NAME Name to search by
--realm-id REALM_ID Numerical ID or realm name
--release-version RELEASE_VERSION Release version for this Host to use (7Server, 7.1, etc)
--root-password ROOT_PW Required if host is managed and value is not inherited from host group or default password in settings
--service-level SERVICE_LEVEL Service level to be used for autoheal
--subnet SUBNET_NAME Subnet name
--subnet-id SUBNET_ID
--typed-parameters TYPED_PARAMS Replaces with new host parameters (with type support)
Comma separated list of values defined by a schema. See Option details section below.
JSON is acceptable and preferred way for complex parameters
--volume VOLUME Volume parameters
Comma-separated list of key=value.
JSON is acceptable and preferred way for complex parameters
Can be specified multiple times.
-h, --help Print help
Option details:
Following parameters accept format defined by its schema (bold are required; <> contain acceptable type; [] contain acceptable value):
--typed-parameters "name=<string>\,value=<string>\,parameter_type=[string|boolean|integer|real|array|hash|yaml|json]\,hidden_value=[true|false|1|0], ... "
--installed-products-attributes "product_id=<string>\,product_name=<string>\,arch=<string>\,version=<string>, ... "
Available keys for --interface:
mac
ip
type Possible values: interface, bmc, bond, bridge
name
subnet_id
domain_id
identifier
managed true/false
primary true/false, each managed hosts needs to have one primary interface.
provision true/false
virtual true/false
For virtual=true:
tag VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for virtual interfaces.
attached_to Identifier of the interface to which this interface belongs, e.g. eth1.
For type=bond:
mode Possible values: balance-rr, active-backup, balance-xor, broadcast, 802.3ad, balance-tlb, balance-alb
attached_devices Identifiers of slave interfaces, e.g. [eth1,eth2]
bond_options
For type=bmc:
provider always IPMI
username
password
Provider specific options:
NOTE: Bold attributes are required.
EC2:
--volume:
--interface:
--compute-attributes:
availability_zone
flavor_id
groups
security_group_ids
managed_ip
GCE:
--volume:
size_gb Volume size in GB, integer value
--interface:
--compute-attributes:
machine_type
network
associate_external_ip
Libvirt:
--volume:
pool_name One of available storage pools
capacity String value, e.g. 10G
allocation
Initial allocation, e.g. 0G
format_type Possible values: raw, qcow2
--interface:
compute_type Possible values: bridge, network
compute_bridge Name of interface according to type
compute_model Possible values: virtio, rtl8139, ne2k_pci, pcnet, e1000
compute_network
Libvirt instance network, e.g. default
--compute-attributes:
cpus Number of CPUs
memory String, amount of memory, value in bytes
cpu_mode Possible values: default, host-model, host-passthrough
start Boolean (expressed as 0 or 1), whether to start the machine or not
OpenStack:
--volume:
--interface:
--compute-attributes:
availability_zone
boot_from_volume
flavor_ref
image_ref
tenant_id
security_groups
network
oVirt:
--volume:
size_gb Volume size in GB, integer value
storage_domain ID or name of storage domain
bootable Boolean, set 1 for bootable, only one volume can be bootable
preallocate Boolean, set 1 to preallocate
wipe_after_delete Boolean, set 1 to wipe disk after delete
interface Disk interface name, must be ide, virto or virto_scsi
--interface:
compute_name Compute name, e.g. eth0
compute_network Select one of available networks for a cluster, must be an ID
compute_interface Interface type
--compute-attributes:
cluster ID of cluster to use
template Hardware profile to use
cores Integer value, number of cores
sockets Integer value, number of sockets
memory Amount of memory, integer value in bytes
start Boolean, set 1 to start the vm
Rackspace:
--volume:
--interface:
--compute-attributes:
flavor_id
VMware:
--volume:
name
storage_pod Storage Pod ID from VMware
datastore Datastore ID from VMware
mode persistent/independent_persistent/independent_nonpersistent
size_gb Integer number, volume size in GB
thin true/false
eager_zero true/false
controller_key Associated SCSI controller key
--interface:
compute_type Type of the network adapter, for example one of:
VirtualVmxnet3
VirtualE1000
See documentation center for your version of vSphere to find more details about available adapter types:
https://www.vmware.com/support/pubs/
compute_network Network ID from VMware
--compute-attributes:
cluster Cluster ID from VMware
corespersocket Number of cores per socket (applicable to hardware versions < 10 only)
cpus CPU count
memory_mb Integer number, amount of memory in MB
path Path to folder
resource_pool Resource Pool ID from VMware
firmware automatic/bios/efi
guest_id Guest OS ID form VMware
hardware_version Hardware version ID from VMware
memoryHotAddEnabled Must be a 1 or 0, lets you add CPU resources while the machine is on
cpuHotAddEnabled Must be a 1 or 0, lets you add memory resources while the machine is on
add_cdrom Must be a 1 or 0, Add a CD-ROM drive to the virtual machine
annotation Annotation Notes
scsi_controllers List with SCSI controllers definitions
type - ID of the controller from VMware
key - Key of the controller (e.g. 1000)
start Must be a 1 or 0, whether to start the machine or not
AzureRM:
--volume:
--interface:
compute_network Select one of available Azure Subnets, must be an ID
compute_public_ip Public IP (None, Static, Dynamic)
compute_private_ip Static Private IP (expressed as true or false)
--compute-attributes:
resource_group Existing Azure Resource Group of user
vm_size VM Size, eg. Standard_A0 etc.
username The Admin username
password The Admin password
platform OS type eg. Linux
ssh_key_data SSH key for passwordless authentication
os_disk_caching OS disk caching
premium_os_disk Premium OS Disk, Boolean as 0 or 1
script_command Custom Script Command
script_uris Comma seperated file URIs2.33. hammer host-collection
ホストコレクションを操作します。
Usage:
hammer host-collection [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
add-host Add host to the host collection
copy Copy a host collection
create Create a host collection
delete Destroy a host collection
erratum Manipulate errata for a host collection
hosts List all hosts
info Show a host collection
list List host collections
package Manipulate packages for a host collection
package-group Manipulate package-groups for a host collection
remove-host Remove hosts from the host collection
update Update a host collection
Options:
-h, --help Print help2.33.1. hammer host-collection add-host
ホストをホストコレクションに追加します。
Usage:
hammer host-collection add-host [OPTIONS]
Options:
--host-ids HOST_IDS Array of host ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Id of the host collection
--name NAME Host collection name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.33.2. hammer host-collection copy
ホストコレクションをコピーします。
Usage:
hammer host-collection copy [OPTIONS]
Options:
--id ID ID of the host collection
--name NAME Host collection name to search by
--new-name NEW_NAME New host collection name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.33.3. hammer host-collection create
ホストコレクションを作成します。
Usage:
hammer host-collection create [OPTIONS]
Options:
--description DESCRIPTION
--host-ids HOST_IDS List of host ids to replace the hosts in host collection
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--max-hosts MAX_HOSTS Maximum number of hosts in the host collection
--name NAME Host Collection name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--unlimited-hosts UNLIMITED_HOSTS Whether or not the host collection may have unlimited hosts
One of true/false, yes/no, 1/0.
-h, --help Print help2.33.4. hammer host-collection delete
ホストコレクションを破棄します。
Usage:
hammer host-collection delete [OPTIONS]
Options:
--id ID Id of the host collection
--name NAME Host collection name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.33.5. hammer host-collection erratum
ホストコレクションのエラータを操作します。
Usage:
hammer host-collection erratum [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
install Install errata on content hosts contained within a host collection
Options:
-h, --help Print help2.33.5.1. hammer host-collection erratum install
ホストコレクション内に含まれるコンテンツホストにエラータをインストールします。
Usage:
hammer host-collection erratum install [OPTIONS]
Options:
--errata ERRATA List of Errata to install
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id HOST_COLLECTION_ID Host Collection ID
--name HOST_COLLECTION_NAME Host Collection Name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.33.6. hammer host-collection hosts
ホストを一覧表示します。
Usage:
hammer host-collection hosts [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--hostgroup HOSTGROUP_NAME Hostgroup name
--hostgroup-id HOSTGROUP_ID
--hostgroup-title HOSTGROUP_TITLE Hostgroup title
--id HOST_COLLECTION_ID Host Collection ID
--include INCLUDE Array of extra information types to include
Possible value(s): 'parameters', 'all_parameters'
--lifecycle-environment LIFECYCLE_ENVIRONMENT_NAME Lifecycle environment name to search by
--lifecycle-environment-id LIFECYCLE_ENVIRONMENT_ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name HOST_COLLECTION_NAME Host Collection Name
--order ORDER Sort field and order, eg. ‘id DESC’
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Filter results
--thin THIN Only list ID and name of hosts
One of true/false, yes/no, 1/0.
-h, --help Print help
Predefined field sets:
------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Security | x | |
Bugfix | x | |
Enhancement | x | |
------------|-----|---------|-----
Search / Order fields:
activation_key string
activation_key_id string
addon string
addons_status Values: mismatched, matched, not_specified
ansible_role string
applicable_errata string
applicable_rpms string
architecture string
autoheal boolean
boot_time
build Values: true, false
class string
comment text
compute_resource string
compute_resource_id integer
config_group string
content_source string
content_view string
content_view_id integer
created_at datetime
domain string
domain_id integer
environment string
errata_status Values: security_needed, errata_needed, updated, unknown
execution_status Values: ok, error
facts string
global_status Values: ok, warning, error
has_ip string
has_mac string
hostgroup string
hostgroup_fullname string
hostgroup_id integer
hostgroup_name string
hostgroup_title string
hypervisor Values: true, false
hypervisor_host string
image string
installable_errata string
installed_at datetime
ip string
job_invocation.id string
job_invocation.result Values: cancelled, failed, pending, success
last_checkin datetime
last_report datetime
lifecycle_environment string
lifecycle_environment_id integer
location string
location_id integer
mac string
managed Values: true, false
model string
name string
organization string
organization_id integer
origin string
os string
os_description string
os_id integer
os_major string
os_minor string
os_title string
owner string
owner_id integer
owner_type string
params string
params_name string
parent_hostgroup string
puppet_ca string
puppet_proxy_id integer
puppetmaster string
purpose_status Values: mismatched, matched, not_specified
realm string
realm_id integer
registered_at datetime
registered_through string
release_version string
role text
role_status Values: mismatched, matched, not_specified
service_level string
sla_status Values: mismatched, matched, not_specified
smart_proxy string
status.applied integer
status.enabled Values: true, false
status.failed integer
status.failed_restarts integer
status.interesting Values: true, false
status.pending integer
status.restarted integer
status.skipped integer
subnet string
subnet.name text
subnet6 string
subnet6.name text
subscription_id string
subscription_name string
subscription_status Values: valid, partial, invalid, unknown, unsubscribed_hypervisor
subscription_uuid string
trace_status Values: reboot_needed, process_restart_needed, updated
upgradable_rpms string
usage text
usage_status Values: mismatched, matched, not_specified
user.firstname string
user.lastname string
user.login string
user.mail string
usergroup string
usergroup.name string
uuid string2.33.7. hammer host-collection info
ホストコレクションを表示します。
Usage:
hammer host-collection info [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Id of the host collection
--name NAME Host collection name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help
Predefined field sets:
------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Limit | x | x |
Description | x | x |
Total Hosts | x | x |
------------|-----|---------|-----2.33.8. hammer host-collection list
ホストコレクションの一覧を表示します。
Usage:
hammer host-collection list [OPTIONS]
Options:
--activation-key ACTIVATION_KEY_NAME Activation key name to search by
--activation-key-id ACTIVATION_KEY_ID ID of the activation key
--available-for AVAILABLE_FOR Interpret specified object to return only Host Collections that can be
Associated with specified object. The value 'host' is supported.
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--full-result FULL_RESULT Whether or not to show all results
One of true/false, yes/no, 1/0.
--host HOST_NAME Host name
--host-id HOST_ID
--name NAME Host collection name to filter by
--order ORDER Sort field and order, eg. 'id DESC'
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--page PAGE Page number, starting at 1
--per-page PER_PAGE Number of results per page to return
--search SEARCH Search string
-h, --help Print help
Predefined field sets:
------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------|-----|---------|-----
ID | x | x | x
Name | x | x | x
Limit | x | x |
Description | x | x |
------------|-----|---------|-----
Search / Order fields:
host string
name string
organization_id integer2.33.9. hammer host-collection package
ホストコレクションのパッケージを操作します。
Usage:
hammer host-collection package [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
install Install packages on content hosts contained within a host collection
remove Remove packages on content hosts contained within a host collection
update Update packages on content hosts contained within a host collection
Options:
-h, --help Print help2.33.9.1. hammer host-collection package install
ホストコレクションに含まれるコンテンツホストにパッケージをインストールします。
Usage:
hammer host-collection package install [OPTIONS]
Options:
--id HOST_COLLECTION_ID Host Collection ID
--name HOST_COLLECTION_NAME Host Collection Name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--packages PACKAGES Comma-separated list of packages to install
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.33.9.2. hammer host-collection package remove
ホストコレクションに含まれるコンテンツホストでパッケージを削除します。
Usage:
hammer host-collection package remove [OPTIONS]
Options:
--id HOST_COLLECTION_ID Host Collection ID
--name HOST_COLLECTION_NAME Host Collection Name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--packages PACKAGES Comma-separated list of packages to install
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.33.9.3. hammer host-collection package update
ホストコレクションに含まれるコンテンツホストでパッケージを更新します。
Usage:
hammer host-collection package update [OPTIONS]
Options:
--id HOST_COLLECTION_ID Host Collection ID
--name HOST_COLLECTION_NAME Host Collection Name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--packages PACKAGES Comma-separated list of packages to install
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.33.10. hammer host-collection package-group
ホストコレクションのパッケージグループを操作します。
Usage:
hammer host-collection package-group [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
install Install package-groups on content hosts contained within a host collection
remove Remove package-groups on content hosts contained within a host collection
update Update package-groups on content hosts contained within a host collection
Options:
-h, --help Print help2.33.10.1. hammer host-collection package-group install
ホストコレクションに含まれるコンテンツホストにパッケージグループをインストールします。
Usage:
hammer host-collection package-group install [OPTIONS]
Options:
--id HOST_COLLECTION_ID Host Collection ID
--name HOST_COLLECTION_NAME Host Collection Name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--package-groups PACKAGE-GROUPS Comma-separated list of package-groups to install
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.33.10.2. hammer host-collection package-group remove
ホストコレクションに含まれるコンテンツホストでパッケージグループを削除します。
Usage:
hammer host-collection package-group remove [OPTIONS]
Options:
--id HOST_COLLECTION_ID Host Collection ID
--name HOST_COLLECTION_NAME Host Collection Name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--package-groups PACKAGE-GROUPS Comma-separated list of package-groups to install
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.33.10.3. hammer host-collection package-group update
ホストコレクションに含まれるコンテンツホストでパッケージグループを更新します。
Usage:
hammer host-collection package-group update [OPTIONS]
Options:
--id HOST_COLLECTION_ID Host Collection ID
--name HOST_COLLECTION_NAME Host Collection Name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--package-groups PACKAGE-GROUPS Comma-separated list of package-groups to install
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
-h, --help Print help2.33.11. hammer host-collection remove-host
ホストコレクションからホストを削除します。
Usage:
hammer host-collection remove-host [OPTIONS]
Options:
--host-ids HOST_IDS Array of host ids
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Id of the host collection
--name NAME Host collection name to search by
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
-h, --help Print help2.33.12. hammer host-collection update
ホストコレクションを更新します。
Usage:
hammer host-collection update [OPTIONS]
Options:
--description DESCRIPTION
--host-ids HOST_IDS List of host ids to replace the hosts in host collection
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--hosts HOST_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID Id of the host collection
--max-hosts MAX_HOSTS Maximum number of hosts in the host collection
--name NAME Host collection name to search by
--new-name NEW_NAME Host Collection name
--organization ORGANIZATION_NAME Organization name to search by
--organization-id ORGANIZATION_ID Organization ID
--organization-label ORGANIZATION_LABEL Organization label to search by
--unlimited-hosts UNLIMITED_HOSTS Whether or not the host collection may have unlimited hosts
One of true/false, yes/no, 1/0.
-h, --help Print help2.34. hammer hostgroup
ホストグループを操作します。
Usage:
hammer hostgroup [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
ansible-roles Manage Ansible roles on a hostgroup
create Create a host group
delete Delete a host group
delete-parameter Delete parameter for a hostgroup
info Show a host group
list List all host groups
puppet-classes List all Puppet classes
rebuild-config Rebuild orchestration config
sc-params List all smart class parameters
set-parameter Create or update parameter for a hostgroup
smart-variables List all smart variables
update Update a host group
Options:
-h, --help Print help2.34.1. hammer hostgroup ansible-roles
ホストグループで Ansible ロールを実行します。
Usage:
hammer hostgroup ansible-roles [OPTIONS] SUBCOMMAND [ARG] ...
Parameters:
SUBCOMMAND Subcommand
[ARG] ... Subcommand arguments
Subcommands:
assign Assigns Ansible roles to a hostgroup
list List all Ansible roles for a hostgroup
play Runs all Ansible roles on a hostgroup
Options:
-h, --help Print help2.34.1.1. hammer hostgroup ansible-roles assign
Ansible ロールをホストグループに割り当てます。
Usage:
hammer hostgroup ansible-roles assign [OPTIONS]
Options:
--ansible-role-ids ANSIBLE_ROLE_IDS Ansible roles to assign to a hostgroup
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--ansible-roles ANSIBLE_ROLE_NAMES Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Hostgroup name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--title TITLE Hostgroup title
-h, --help Print help2.34.1.2. hammer hostgroup ansible-roles list
ホストグループの Ansible ロールをすべて一覧表示します。
Usage:
hammer hostgroup ansible-roles list [OPTIONS]
Options:
--fields FIELDS Show specified fileds or predefined filed sets only. (See below)
Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
JSON is acceptable and preferred way for complex parameters
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Hostgroup name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--title TITLE Hostgroup title
-h, --help Print help
Predefined field sets:
------------|-----|---------|-----
FIELDS | ALL | DEFAULT | THIN
------------|-----|---------|-----
Id | x | x | x
Name | x | x | x
Imported at | x | x |
------------|-----|---------|-----2.34.1.3. hammer hostgroup ansible-roles play
ホストグループに対して全 Ansible ロールを実行します。
Usage:
hammer hostgroup ansible-roles play [OPTIONS]
Options:
--id ID
--location LOCATION_NAME Location name
--location-id LOCATION_ID
--location-title LOCATION_TITLE Location title
--name NAME Hostgroup name
--organization ORGANIZATION_NAME Organization name
--organization-id ORGANIZATION_ID Organization ID
--organization-title ORGANIZATION_TITLE Organization title
--title TITLE Hostgroup title
-h, --help Print help2.34.2. hammer hostgroup create
ホストグループを作成します。
Usage:
hammer hostgroup create [OPTIONS]
Optio