Red Hat Summit이 콘텐츠는 선택한 언어로 제공되지 않습니다.
Chapter 3. Preparing for your AMQ Streams deployment
This section shows how you prepare for a AMQ Streams deployment, describing:
- The prerequisites you need before you can deploy AMQ Streams
- How to download the AMQ Streams release artifacts to use in your deployment
- How to push the AMQ Streams container images into you own registry (if required)
- How to set up admin roles for configuration of custom resources used in deployment
To run the commands in this guide, your cluster user must have the rights to manage role-based access control (RBAC) and CRDs.
3.1. Deployment prerequisites
To deploy AMQ Streams, make sure that:
An OpenShift 3.11 and later cluster is available.
AMQ Streams is based on Strimzi 0.20.x.
-
The
occommand-line tool is installed and configured to connect to the running cluster.
AMQ Streams supports some features that are specific to OpenShift, where such integration benefits OpenShift users and there is no equivalent implementation using standard Kubernetes.
3.2. Downloading AMQ Streams release artifacts
To install AMQ Streams, download and extract the release artifacts from the amq-streams-<version>-ocp-install-examples.zip file from the AMQ Streams download site.
AMQ Streams release artifacts include sample YAML files to help you deploy the components of AMQ Streams to OpenShift, perform common operations, and configure your Kafka cluster.
Use oc to deploy the Cluster Operator from the install/cluster-operator folder of the downloaded ZIP file. For more information about deploying and configuring the Cluster Operator, see Section 4.1.1, “Deploying the Cluster Operator”.
In addition, if you want to use standalone installations of the Topic and User Operators with a Kafka cluster that is not managed by the AMQ Streams Cluster Operator, you can deploy them from the install/topic-operator and install/user-operator folders.
Additionally, AMQ Streams container images are available through the Red Hat Ecosystem Catalog. However, we recommend that you use the YAML files provided to deploy AMQ Streams.
3.3. Pushing container images to your own registry
Container images for AMQ Streams are available in the Red Hat Ecosystem Catalog. The installation YAML files provided by AMQ Streams will pull the images directly from the Red Hat Ecosystem Catalog.
If you do not have access to the Red Hat Ecosystem Catalog or want to use your own container repository:
- Pull all container images listed here
- Push them into your own registry
- Update the image names in the installation YAML files
Each Kafka version supported for the release has a separate image.
| Container image | Namespace/Repository | Description |
|---|---|---|
| Kafka |
| AMQ Streams image for running Kafka, including:
|
| Operator |
| AMQ Streams image for running the operators:
|
| Kafka Bridge |
| AMQ Streams image for running the AMQ Streams Kafka Bridge |
3.4. Designating AMQ Streams administrators
AMQ Streams provides custom resources for configuration of your deployment. By default, permission to view, create, edit, and delete these resources is limited to OpenShift cluster administrators. AMQ Streams provides two cluster roles that you can use to assign these rights to other users:
-
strimzi-viewallows users to view and list AMQ Streams resources. -
strimzi-adminallows users to also create, edit or delete AMQ Streams resources.
When you install these roles, they will automatically aggregate (add) these rights to the default OpenShift cluster roles. strimzi-view aggregates to the view role, and strimzi-admin aggregates to the edit and admin roles. Because of the aggregation, you might not need to assign these roles to users who already have similar rights.
The following procedure shows how to assign a strimzi-admin role that allows non-cluster administrators to manage AMQ Streams resources.
A system administrator can designate AMQ Streams administrators after the Cluster Operator is deployed.
Prerequisites
- The AMQ Streams Custom Resource Definitions (CRDs) and role-based access control (RBAC) resources to manage the CRDs have been deployed with the Cluster Operator.
Procedure
Create the
strimzi-viewandstrimzi-admincluster roles in OpenShift.oc apply -f install/strimzi-admin
oc apply -f install/strimzi-adminCopy to Clipboard Copied! If needed, assign the roles that provide access rights to users that require them.
oc create clusterrolebinding strimzi-admin --clusterrole=strimzi-admin --user=user1 --user=user2
oc create clusterrolebinding strimzi-admin --clusterrole=strimzi-admin --user=user1 --user=user2Copy to Clipboard Copied!
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}