홈
제품
Red Hat build of Apache Camel
4.10
Red Hat build of Apache Camel for Spring Boot Reference
Chapter 12. AWS Secrets Manager

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 12. AWS Secrets Manager

Only producer is supported

The AWS Secrets Manager component supports AWS Secrets Manager service.

Prerequisites

You must have a valid Amazon Web Services developer account, and be signed up to use Amazon Secrets Manager. More information is available at AWS Secrets Manager.

12.3. Configuring Options
링크 복사

Camel components are configured on two separate levels:

component level
endpoint level

12.3.1. Configuring Component Options
링크 복사

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level. For example, a component may have security settings, credentials for authentication, urls for network connection and so forth. Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

the Component DSL.
in a configuration file (application.properties, *.yaml files, etc).
directly in the Java code.

12.3.2. Configuring Endpoint Options
링크 복사

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.
They allow externalizing the configuration from the code.
They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

12.4. Component Options
링크 복사

The AWS Secrets Manager component supports 23 options, which are listed below.

Expand

Name	Description	Default	Type
binaryPayload (producer)	Set if the secret is binary or not.	false	boolean
configuration (producer)	Component configuration.		SecretsManagerConfiguration
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
operation (producer)	Required The operation to perform. Enum values: listSecrets createSecret getSecret describeSecret deleteSecret rotateSecret updateSecret restoreSecret replicateSecretToRegions		SecretsManagerOperations
overrideEndpoint (producer)	Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.	false	boolean
pojoRequest (producer)	If we want to use a POJO request as body or not.	false	boolean
profileCredentialsName (producer)	If using a profile credentials provider, this parameter will set the profile name.		String
region (producer)	The region in which a Secrets Manager client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id(). Enum values: ap-south-2 ap-south-1 eu-south-1 eu-south-2 us-gov-east-1 me-central-1 il-central-1 ca-central-1 eu-central-1 us-iso-west-1 eu-central-2 eu-isoe-west-1 us-west-1 us-west-2 af-south-1 eu-north-1 eu-west-3 eu-west-2 eu-west-1 ap-northeast-3 ap-northeast-2 ap-northeast-1 me-south-1 sa-east-1 ap-east-1 cn-north-1 ca-west-1 us-gov-west-1 ap-southeast-1 ap-southeast-2 us-iso-east-1 ap-southeast-3 ap-southeast-4 us-east-1 us-east-2 cn-northwest-1 us-isob-east-1 aws-global aws-cn-global aws-us-gov-global aws-iso-global aws-iso-b-global		String
uriEndpointOverride (producer)	Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.		String
useProfileCredentialsProvider (producer)	Set whether the Secrets Manager client should expect to load credentials through a profile credentials provider.	false	boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
secretsManagerClient (advanced)	Autowired To use an existing configured AWS Secrets Manager client.		SecretsManagerClient
healthCheckConsumerEnabled (health)	Used for enabling or disabling all consumer based health checks from this component.	true	boolean
healthCheckProducerEnabled (health)	Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.	true	boolean
proxyHost (proxy)	To define a proxy host when instantiating the Secrets Manager client.		String
proxyPort (proxy)	To define a proxy port when instantiating the Secrets Manager client.		Integer
proxyProtocol (proxy)	To define a proxy protocol when instantiating the Secrets Manager client. Enum values: HTTP HTTPS	HTTPS	Protocol
accessKey (security)	Amazon AWS Access Key.		String
secretKey (security)	Amazon AWS Secret Key.		String
sessionToken (security)	Amazon AWS Session Token used when the user needs to assume an IAM role.		String
trustAllCertificates (security)	If we want to trust all certificates in case of overriding the endpoint.	false	boolean
useDefaultCredentialsProvider (security)	Set whether the Translate client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.	false	boolean
useSessionCredentials (security)	Set whether the Secrets Manager client should expect to use Session Credentials. This is useful in a situation in which the user needs to assume an IAM role for doing operations in Secrets Manager.	false	boolean

12.5. Endpoint Options
링크 복사

The AWS Secrets Manager endpoint is configured using URI syntax:

aws-secrets-manager:label

aws-secrets-manager:label

Copy to Clipboard

Toggle word wrap

With the following path and query parameters:

12.5.1. Path Parameters (1 parameters)
링크 복사

Expand

Name	Description	Default	Type
label (producer)	Required Logical name.		String

12.5.2. Query Parameters (19 parameters)
링크 복사

Expand

Name	Description	Default	Type
binaryPayload (producer)	Set if the secret is binary or not.	false	boolean
operation (producer)	Required The operation to perform. Enum values: listSecrets createSecret getSecret describeSecret deleteSecret rotateSecret updateSecret restoreSecret replicateSecretToRegions		SecretsManagerOperations
overrideEndpoint (producer)	Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.	false	boolean
pojoRequest (producer)	If we want to use a POJO request as body or not.	false	boolean
profileCredentialsName (producer)	If using a profile credentials provider, this parameter will set the profile name.		String
region (producer)	The region in which a Secrets Manager client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id(). Enum values: ap-south-2 ap-south-1 eu-south-1 eu-south-2 us-gov-east-1 me-central-1 il-central-1 ca-central-1 eu-central-1 us-iso-west-1 eu-central-2 eu-isoe-west-1 us-west-1 us-west-2 af-south-1 eu-north-1 eu-west-3 eu-west-2 eu-west-1 ap-northeast-3 ap-northeast-2 ap-northeast-1 me-south-1 sa-east-1 ap-east-1 cn-north-1 ca-west-1 us-gov-west-1 ap-southeast-1 ap-southeast-2 us-iso-east-1 ap-southeast-3 ap-southeast-4 us-east-1 us-east-2 cn-northwest-1 us-isob-east-1 aws-global aws-cn-global aws-us-gov-global aws-iso-global aws-iso-b-global		String
uriEndpointOverride (producer)	Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.		String
useProfileCredentialsProvider (producer)	Set whether the Secrets Manager client should expect to load credentials through a profile credentials provider.	false	boolean
lazyStartProducer (producer (advanced))	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
secretsManagerClient (advanced)	Autowired To use an existing configured AWS Secrets Manager client.		SecretsManagerClient
proxyHost (proxy)	To define a proxy host when instantiating the Secrets Manager client.		String
proxyPort (proxy)	To define a proxy port when instantiating the Secrets Manager client.		Integer
proxyProtocol (proxy)	To define a proxy protocol when instantiating the Secrets Manager client. Enum values: HTTP HTTPS	HTTPS	Protocol
accessKey (security)	Amazon AWS Access Key.		String
secretKey (security)	Amazon AWS Secret Key.		String
sessionToken (security)	Amazon AWS Session Token used when the user needs to assume an IAM role.		String
trustAllCertificates (security)	If we want to trust all certificates in case of overriding the endpoint.	false	boolean
useDefaultCredentialsProvider (security)	Set whether the Translate client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.	false	boolean
useSessionCredentials (security)	Set whether the Secrets Manager client should expect to use Session Credentials. This is useful in a situation in which the user needs to assume an IAM role for doing operations in Secrets Manager.	false	boolean

12.5.3. Static credentials, Default Credential Provider and Profile Credentials Provider
링크 복사

You can avoid the usage of explicit static credentials by specifying the useDefaultCredentialsProvider option and setting it to true.

The order of evaluation for Default Credentials Provider is as per the following:

Java system properties - aws.accessKeyId and aws.secretKey.
Environment variables - AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.
Web Identity Token from AWS STS.
The shared credentials and config files.
Amazon ECS container credentials - loaded from the Amazon ECS if the environment variable AWS_CONTAINER_CREDENTIALS_RELATIVE_URI is set.
Amazon EC2 Instance profile credentials.

You can use the Profile Credentials Provider, by specifying the useProfileCredentialsProvider option to true and profileCredentialsName to the profile name.

Only one of static, default and profile credentials could be used at the same time. For more information about this, see AWS credentials documentation.

12.5.4. Using AWS Secrets Manager Property Function
링크 복사

To use this function, you need to provide credentials to AWS Secrets Manager Service as environment variables:

export CAMEL_VAULT_AWS_ACCESS_KEY=accessKey
export CAMEL_VAULT_AWS_SECRET_KEY=secretKey
export CAMEL_VAULT_AWS_REGION=region

export CAMEL_VAULT_AWS_ACCESS_KEY=accessKey
export CAMEL_VAULT_AWS_SECRET_KEY=secretKey
export CAMEL_VAULT_AWS_REGION=region

Copy to Clipboard

Toggle word wrap

You can also configure the credentials in the application.properties file such as:

camel.vault.aws.accessKey = accessKey
camel.vault.aws.secretKey = secretKey
camel.vault.aws.region = region

camel.vault.aws.accessKey = accessKey
camel.vault.aws.secretKey = secretKey
camel.vault.aws.region = region

Copy to Clipboard

Toggle word wrap

If you want to use the AWS default credentials provider instead, you need to provide the following env variables:

export CAMEL_VAULT_AWS_USE_DEFAULT_CREDENTIALS_PROVIDER=true
export CAMEL_VAULT_AWS_REGION=region

export CAMEL_VAULT_AWS_USE_DEFAULT_CREDENTIALS_PROVIDER=true
export CAMEL_VAULT_AWS_REGION=region

Copy to Clipboard

Toggle word wrap

You can also configure the credentials in the application.properties file such as:

camel.vault.aws.defaultCredentialsProvider = true
camel.vault.aws.region = region

camel.vault.aws.defaultCredentialsProvider = true
camel.vault.aws.region = region

Copy to Clipboard

Toggle word wrap

It is also possible to specify a particular profile name for accessing AWS Secrets Manager as follows:

export CAMEL_VAULT_AWS_USE_PROFILE_CREDENTIALS_PROVIDER=true
export CAMEL_VAULT_AWS_PROFILE_NAME=test-account
export CAMEL_VAULT_AWS_REGION=region

export CAMEL_VAULT_AWS_USE_PROFILE_CREDENTIALS_PROVIDER=true
export CAMEL_VAULT_AWS_PROFILE_NAME=test-account
export CAMEL_VAULT_AWS_REGION=region

Copy to Clipboard

Toggle word wrap

You can also configure the credentials in the application.properties file such as:

camel.vault.aws.profileCredentialsProvider = true
camel.vault.aws.profileName = test-account
camel.vault.aws.region = region

camel.vault.aws.profileCredentialsProvider = true
camel.vault.aws.profileName = test-account
camel.vault.aws.region = region

Copy to Clipboard

Toggle word wrap

Note

camel.vault.aws configuration only applies to the AWS Secrets Manager properties function (for example, when resolving properties). When using the operation option to create, get, list secrets etc., provide the usual options for connecting to AWS Services.

At this point, you can reference a property in the following way:

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route}}"/>
    </route>
</camelContext>

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route}}"/>
    </route>
</camelContext>

Copy to Clipboard

Toggle word wrap

Where the route will be the name of the secret stored in the AWS Secrets Manager Service.

You could specify a default value in case the secret is not present on AWS Secret Manager:

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route:default}}"/>
    </route>
</camelContext>

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route:default}}"/>
    </route>
</camelContext>

Copy to Clipboard

Toggle word wrap

In this case, if the secret doesn’t exist, the property will fall back to "default" as value.

Also, you are able to get a particular field of the secret, if you have, for example, a secret named database of this form:

{
  "username": "admin",
  "password": "password123",
  "engine": "postgres",
  "host": "127.0.0.1",
  "port": "3128",
  "dbname": "db"
}

{
  "username": "admin",
  "password": "password123",
  "engine": "postgres",
  "host": "127.0.0.1",
  "port": "3128",
  "dbname": "db"
}

Copy to Clipboard

Toggle word wrap

You can get a single secret value in your route as follows:

<camelContext>
    <route>
        <from uri="direct:start"/>
        <log message="Username is {{aws:database/username}}"/>
    </route>
</camelContext>

<camelContext>
    <route>
        <from uri="direct:start"/>
        <log message="Username is {{aws:database/username}}"/>
    </route>
</camelContext>

Copy to Clipboard

Toggle word wrap

Or re-use the property as part of an endpoint.

You can specify a default value in case the particular field of secret is not present on AWS Secret Manager:

<camelContext>
    <route>
        <from uri="direct:start"/>
        <log message="Username is {{aws:database/username:admin}}"/>
    </route>
</camelContext>

<camelContext>
    <route>
        <from uri="direct:start"/>
        <log message="Username is {{aws:database/username:admin}}"/>
    </route>
</camelContext>

Copy to Clipboard

Toggle word wrap

In this case, if the secret does not exist or the secret exists, but the username field is not part of the secret, the property will fall back to "admin" as its value.

There is also the syntax to get a particular version of the secret for both the approach, with field/default value specified or only with secret:

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route@bf9b4f4b-8e63-43fd-a73c-3e2d3748b451}}"/>
    </route>
</camelContext>

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route@bf9b4f4b-8e63-43fd-a73c-3e2d3748b451}}"/>
    </route>
</camelContext>

Copy to Clipboard

Toggle word wrap

This approach will return the RAW route secret with the version 'bf9b4f4b-8e63-43fd-a73c-3e2d3748b451'.

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route:default@bf9b4f4b-8e63-43fd-a73c-3e2d3748b451}}"/>
    </route>
</camelContext>

<camelContext>
    <route>
        <from uri="direct:start"/>
        <to uri="{{aws:route:default@bf9b4f4b-8e63-43fd-a73c-3e2d3748b451}}"/>
    </route>
</camelContext>

Copy to Clipboard

Toggle word wrap

This approach will return the route secret value with version 'bf9b4f4b-8e63-43fd-a73c-3e2d3748b451' or default value in case the secret doesn’t exist or the version doesn’t exist.

<camelContext>
    <route>
        <from uri="direct:start"/>
        <log message="Username is {{aws:database/username:admin@bf9b4f4b-8e63-43fd-a73c-3e2d3748b451}}"/>
    </route>
</camelContext>

<camelContext>
    <route>
        <from uri="direct:start"/>
        <log message="Username is {{aws:database/username:admin@bf9b4f4b-8e63-43fd-a73c-3e2d3748b451}}"/>
    </route>
</camelContext>

Copy to Clipboard

Toggle word wrap

This approach will return the username field of the database secret with version 'bf9b4f4b-8e63-43fd-a73c-3e2d3748b451' or admin in case the secret doesn’t exist or the version doesn’t exist.

The only requirement is adding the camel-aws-secrets-manager jar to your Camel application.

12.5.5. Automatic Camel context reloading on Secret Refresh
링크 복사

Being able to reload Camel context on a Secret Refresh could be done by specifying the usual credentials (the same used for AWS Secret Manager Property Function).

With Environment variables:

export CAMEL_VAULT_AWS_USE_DEFAULT_CREDENTIALS_PROVIDER=accessKey
export CAMEL_VAULT_AWS_REGION=region

export CAMEL_VAULT_AWS_USE_DEFAULT_CREDENTIALS_PROVIDER=accessKey
export CAMEL_VAULT_AWS_REGION=region

Copy to Clipboard

Toggle word wrap

or as plain Camel main properties:

camel.vault.aws.useDefaultCredentialProvider = true
camel.vault.aws.region = region

camel.vault.aws.useDefaultCredentialProvider = true
camel.vault.aws.region = region

Copy to Clipboard

Toggle word wrap

Or by specifying accessKey/SecretKey and region, instead of using the default credentials provider chain.

To enable the automatic refresh, set the additional properties as follows:

camel.vault.aws.refreshEnabled=true
camel.vault.aws.refreshPeriod=60000
camel.vault.aws.secrets=Secret
camel.main.context-reload-enabled = true

camel.vault.aws.refreshEnabled=true
camel.vault.aws.refreshPeriod=60000
camel.vault.aws.secrets=Secret
camel.main.context-reload-enabled = true

Copy to Clipboard

Toggle word wrap

where camel.vault.aws.refreshEnabled will enable the automatic context reload, camel.vault.aws.refreshPeriod is the interval of time between two different checks for update events and camel.vault.aws.secrets is a regex representing the secrets we want to track for updates.

Note that camel.vault.aws.secrets is not mandatory. If it is not specified, the task responsible for checking updates events will take it into accounts or the properties with an aws: prefix.

12.5.6. Automatic Camel context reloading on Secret Refresh with Eventbridge and AWS SQS Services
링크 복사

Another option is to use AWS EventBridge in conjunction with the AWS SQS service.

On the AWS side, the following resources need to be created:

an AWS Couldtrail trail
an AWS SQS Queue
an Eventbridge rule of the following kind

{
  "source": ["aws.secretsmanager"],
  "detail-type": ["AWS API Call via CloudTrail"],
  "detail": {
    "eventSource": ["secretsmanager.amazonaws.com"]
  }
}

{
  "source": ["aws.secretsmanager"],
  "detail-type": ["AWS API Call via CloudTrail"],
  "detail": {
    "eventSource": ["secretsmanager.amazonaws.com"]
  }
}

Copy to Clipboard

Toggle word wrap

This rule will make the event related to AWS Secrets Manager filtered

You need to set the a Rule target to the AWS SQS Queue for Eventbridge rule
You need to give permission to the Eventbrige rule, to write on the above SQS Queue. For doing this you’ll need to define a json file like this:

{
    "Policy": "{\"Version\":\"2012-10-17\",\"Id\":\"<queue_arn>/SQSDefaultPolicy\",\"Statement\":[{\"Sid\": \"EventsToMyQueue\", \"Effect\": \"Allow\", \"Principal\": {\"Service\": \"events.amazonaws.com\"}, \"Action\": \"sqs:SendMessage\", \"Resource\": \"<queue_arn>\", \"Condition\": {\"ArnEquals\": {\"aws:SourceArn\": \"<eventbridge_rule_arn>\"}}}]}"
}

{
    "Policy": "{\"Version\":\"2012-10-17\",\"Id\":\"<queue_arn>/SQSDefaultPolicy\",\"Statement\":[{\"Sid\": \"EventsToMyQueue\", \"Effect\": \"Allow\", \"Principal\": {\"Service\": \"events.amazonaws.com\"}, \"Action\": \"sqs:SendMessage\", \"Resource\": \"<queue_arn>\", \"Condition\": {\"ArnEquals\": {\"aws:SourceArn\": \"<eventbridge_rule_arn>\"}}}]}"
}

Copy to Clipboard

Toggle word wrap

Change the values for queue_arn and eventbridge_rule_arn and save the file with policy.json name and run the following command with AWS CLI:

aws sqs set-queue-attributes --queue-url <queue_url> --attributes file://policy.json

aws sqs set-queue-attributes --queue-url <queue_url> --attributes file://policy.json

Copy to Clipboard

Toggle word wrap

where queue_url is the AWS SQS Queue URL of the just created Queue.

Now you should be able to set up the configuration on the Camel side. To enable the SQS notification add the following properties:

camel.vault.aws.refreshEnabled=true
camel.vault.aws.refreshPeriod=60000
camel.vault.aws.secrets=Secret
camel.main.context-reload-enabled = true
camel.vault.aws.useSqsNotification=true
camel.vault.aws.sqsQueueUrl=<queue_url>

camel.vault.aws.refreshEnabled=true
camel.vault.aws.refreshPeriod=60000
camel.vault.aws.secrets=Secret
camel.main.context-reload-enabled = true
camel.vault.aws.useSqsNotification=true
camel.vault.aws.sqsQueueUrl=<queue_url>

Copy to Clipboard

Toggle word wrap

where queue_url is the AWS SQS Queue URL of the just created Queue.

Whenever an event of PutSecretValue for the Secret named Secret happens, a message will be enqueued in the AWS SQS Queue and consumed on the Camel side and a context reload will be triggered.

12.6. Message Headers
링크 복사

The AWS Secrets Manager component supports 8 message header(s), which is/are listed below:

Expand

Name	Description	Type
CamelAwsSecretsManagerOperation (producer) Constant: OPERATION	The operation we want to perform.	String
CamelAwsSecretsManagerMaxResults (producer) Constant: MAX_RESULTS	The number of results to include in the response.	Integer
CamelAwsSecretsManagerSecretName (producer) Constant: SECRET_NAME	The name of the secret.	String
CamelAwsSecretsManagerSecretDescription (producer) Constant: SECRET_DESCRIPTION	The description of the secret.	String
CamelAwsSecretsManagerSecretId (producer) Constant: SECRET_ID	The ARN or name of the secret.	String
CamelAwsSecretsManagerLambdaRotationFunctionArn (producer) Constant: LAMBDA_ROTATION_FUNCTION_ARN	The ARN of the Lambda rotation function that can rotate the secret.	String
CamelAwsSecretsManagerSecretVersionId (producer) Constant: SECRET_VERSION_ID	The unique identifier of the version of the secret.	String
CamelAwsSecretsManagerSecretReplicationRegions (producer) Constant: SECRET_REPLICATION_REGIONS	A comma separated list of Regions in which to replicate the secret.	String

12.6.1. Secrets Manager Producer operations
링크 복사

Camel-AWS-Secrets-manager component provides the following operation on the producer side:

listSecrets
createSecret
deleteSecret
describeSecret
rotateSecret
getSecret
updateSecret
replicateSecretToRegions

12.7. Spring Boot Auto-Configuration
링크 복사

The component supports 24 options, which are listed below.

Expand

Name	Description	Default	Type
camel.component.aws-secrets-manager.access-key	Amazon AWS Access Key.		String
camel.component.aws-secrets-manager.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.aws-secrets-manager.binary-payload	Set if the secret is binary or not.	false	Boolean
camel.component.aws-secrets-manager.configuration	Component configuration. The option is a org.apache.camel.component.aws.secretsmanager.SecretsManagerConfiguration type.		SecretsManagerConfiguration
camel.component.aws-secrets-manager.enabled	Whether to enable auto configuration of the aws-secrets-manager component. This is enabled by default.		Boolean
camel.component.aws-secrets-manager.health-check-consumer-enabled	Used for enabling or disabling all consumer based health checks from this component.	true	Boolean
camel.component.aws-secrets-manager.health-check-producer-enabled	Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.	true	Boolean
camel.component.aws-secrets-manager.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.aws-secrets-manager.operation	The operation to perform.		SecretsManagerOperations
camel.component.aws-secrets-manager.override-endpoint	Set the need for overriding the endpoint. This option needs to be used in combination with the uriEndpointOverride option.	false	Boolean
camel.component.aws-secrets-manager.pojo-request	If we want to use a POJO request as body or not.	false	Boolean
camel.component.aws-secrets-manager.profile-credentials-name	If using a profile credentials provider, this parameter will set the profile name.		String
camel.component.aws-secrets-manager.proxy-host	To define a proxy host when instantiating the Secrets Manager client.		String
camel.component.aws-secrets-manager.proxy-port	To define a proxy port when instantiating the Secrets Manager client.		Integer
camel.component.aws-secrets-manager.proxy-protocol	To define a proxy protocol when instantiating the Secrets Manager client.		Protocol
camel.component.aws-secrets-manager.region	The region in which a Secrets Manager client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example, ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().		String
camel.component.aws-secrets-manager.secret-key	Amazon AWS Secret Key.		String
camel.component.aws-secrets-manager.secrets-manager-client	To use an existing configured AWS Secrets Manager client. The option is a software.amazon.awssdk.services.secretsmanager.SecretsManagerClient type.		SecretsManagerClient
camel.component.aws-secrets-manager.session-token	Amazon AWS Session Token used when the user needs to assume an IAM role.		String
camel.component.aws-secrets-manager.trust-all-certificates	If we want to trust all certificates in case of overriding the endpoint.	false	Boolean
camel.component.aws-secrets-manager.uri-endpoint-override	Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.		String
camel.component.aws-secrets-manager.use-default-credentials-provider	Set whether the Translate client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.	false	Boolean
camel.component.aws-secrets-manager.use-profile-credentials-provider	Set whether the Secrets Manager client should expect to load credentials through a profile credentials provider.	false	Boolean
camel.component.aws-secrets-manager.use-session-credentials	Set whether the Secrets Manager client should expect to use Session Credentials. This is useful in a situation in which the user needs to assume an IAM role for doing operations in Secrets Manager.	false	Boolean

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 12. AWS Secrets Manager

12.1. Dependencies
링크 복사

12.2. URI Format
링크 복사

12.3. Configuring Options
링크 복사

12.3.1. Configuring Component Options
링크 복사

12.3.2. Configuring Endpoint Options
링크 복사

12.4. Component Options
링크 복사

12.5. Endpoint Options
링크 복사

12.5.1. Path Parameters (1 parameters)
링크 복사

12.5.2. Query Parameters (19 parameters)
링크 복사

12.5.3. Static credentials, Default Credential Provider and Profile Credentials Provider
링크 복사

12.5.4. Using AWS Secrets Manager Property Function
링크 복사

12.5.5. Automatic Camel context reloading on Secret Refresh
링크 복사

12.5.6. Automatic Camel context reloading on Secret Refresh with Eventbridge and AWS SQS Services
링크 복사

12.6. Message Headers
링크 복사

12.6.1. Secrets Manager Producer operations
링크 복사

12.7. Spring Boot Auto-Configuration
링크 복사

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat 소개

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 12. AWS Secrets Manager

12.1. Dependencies링크 복사링크가 클립보드에 복사되었습니다!

12.2. URI Format링크 복사링크가 클립보드에 복사되었습니다!

12.3. Configuring Options링크 복사링크가 클립보드에 복사되었습니다!

12.3.1. Configuring Component Options링크 복사링크가 클립보드에 복사되었습니다!

12.3.2. Configuring Endpoint Options링크 복사링크가 클립보드에 복사되었습니다!

12.4. Component Options링크 복사링크가 클립보드에 복사되었습니다!

12.5. Endpoint Options링크 복사링크가 클립보드에 복사되었습니다!

12.5.1. Path Parameters (1 parameters)링크 복사링크가 클립보드에 복사되었습니다!

12.5.2. Query Parameters (19 parameters)링크 복사링크가 클립보드에 복사되었습니다!

12.5.3. Static credentials, Default Credential Provider and Profile Credentials Provider링크 복사링크가 클립보드에 복사되었습니다!

12.5.4. Using AWS Secrets Manager Property Function링크 복사링크가 클립보드에 복사되었습니다!

12.5.5. Automatic Camel context reloading on Secret Refresh링크 복사링크가 클립보드에 복사되었습니다!

12.5.6. Automatic Camel context reloading on Secret Refresh with Eventbridge and AWS SQS Services링크 복사링크가 클립보드에 복사되었습니다!

12.6. Message Headers링크 복사링크가 클립보드에 복사되었습니다!

12.6.1. Secrets Manager Producer operations링크 복사링크가 클립보드에 복사되었습니다!

12.7. Spring Boot Auto-Configuration링크 복사링크가 클립보드에 복사되었습니다!

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat 소개

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links

12.1. Dependencies
링크 복사

12.2. URI Format
링크 복사

12.3. Configuring Options
링크 복사

12.3.1. Configuring Component Options
링크 복사

12.3.2. Configuring Endpoint Options
링크 복사

12.4. Component Options
링크 복사

12.5. Endpoint Options
링크 복사

12.5.1. Path Parameters (1 parameters)
링크 복사

12.5.2. Query Parameters (19 parameters)
링크 복사

12.5.3. Static credentials, Default Credential Provider and Profile Credentials Provider
링크 복사

12.5.4. Using AWS Secrets Manager Property Function
링크 복사

12.5.5. Automatic Camel context reloading on Secret Refresh
링크 복사

12.5.6. Automatic Camel context reloading on Secret Refresh with Eventbridge and AWS SQS Services
링크 복사

12.6. Message Headers
링크 복사

12.6.1. Secrets Manager Producer operations
링크 복사

12.7. Spring Boot Auto-Configuration
링크 복사