Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

4.3. IPMI Fence Device Configuration Procedure

This section provides the procedure for adding an IPMI fence device to each node of cluster ipmiclust. Each node of ipmiclust is managed by its own IPMI management board.
Use the following procedure to configure the IPMI management board as the fence device for node clusternode1.example.com using Conga:
  1. As an administrator of luci Select the cluster tab. This displays the Choose a cluster to administer screen.
  2. From the Choose a cluster to administer screen, you should see the previously configured cluster ipmiclust displayed, along with the nodes that make up the cluster. Click on clusternode1.example.com. This displays the configuration screen for node clusternode1.example.com.
  3. At the Main Fencing Method display, click Add a fence device to this level. This causes a dropdown manu to display.
  4. From the dropdown menu, under Create a new Fence Device, select IPMI Lan. This displays a fence device configuration menu, as shown in Figure 4.2, “Creating an IPMI Fence Device”.
    Creating an IPMI Fence Device

    Figure 4.2. Creating an IPMI Fence Device

  5. For Name, enter ipmifence1.
  6. For IP Address, enter 10.15.86.96.
  7. For Login, enter ipmilogin.
  8. For Password, enter ipmipword.
  9. For Password Script, leave the field blank.
  10. For Authentication type, enterpassword. This field specifies the IPMI authentication type. Possible values for this field are none, password, md2, or md5.
  11. Leave the Use Lanplus field blank. You would check this field if your fence device is a Lanplus-capable interface such as iLO2.
  12. Click Update main fence properties. This causes a confirmation screen to be displayed.
  13. On the confirmation screen, click OK. After the fence device has been added, a progress page is displayed after which the display returns to the configuration page for clusternode1.example.com in cluster ipmiclust.
After configuring an IPMI fence device for clusternode1.example.com, use the following procedure to configure an IPMI fence device for clusternode2.example.com.
  1. From the configuration page for clusternode1.example.com, a menu appears on the left of the screen for cluster ipmiclust. Select the node clusternode2.example.com. The configuration page for clusternode2.example.com appears, with no fence device configured.
  2. At the Main Fencing Method display, click Add a fence device to this level. This causes a dropdown manu to display.
  3. From the dropdown menu, under Create a new Fence Device, select IPMI Lan. This displays a fence device configuration menu.
  4. For Name, enter ipmifence2.
  5. For IP Address, enter 10.15.86.97.
  6. For Login, enter ipmilogin.
  7. For Password, enter ipmipword.
  8. For Password Script, leave the field blank.
  9. For Authentication type, enterpassword. This field specifies the IPMI authentication type. Possible values for this field are none, password, md2, or md5.
  10. Leave the Use Lanplus field blank.
  11. Click Update main fence properties. This causes a confirmation screen to be displayed.
  12. On the confirmation screen, click OK. After the fence device has been added, a progress page is displayed after which the display returns to the configuration page for clusternode1.example.com in cluster ipmiclust.
After configuring ipmifence2 as the fencing device for clusternode2.example.com, select node clusternode3.example.com from the menu on the left side of the page and configure an IPMI fence device for that node using the same procedure as you did to configure the fence devices for clusternode2.example.com and clusternode3.example.com. For clusternode3.example.com , use ipmifence3 as the name of the fencing method and 10.15.86.98 as the IP address. Otherwise, use the same values for the fence device parameters.
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

Legal Notice

Theme

© 2026 Red Hat맨 위로 이동