8.4.6. Configuration Overview: Remote Node

This section provides a high-level summary overview of the steps to perform to configure a Pacemaker remote node and to integrate that node into an existing Pacemaker cluster environment.

On the node that you will be configuring as a remote node, allow cluster-related services through the local firewall.
```
firewall-cmd --permanent --add-service=high-availability
success
firewall-cmd --reload
success
```
```
# firewall-cmd --permanent --add-service=high-availability
success
# firewall-cmd --reload
success
```
Copy to Clipboard Toggle word wrap
Note
If you are using iptables directly, or some other firewall solution besides firewalld, simply open the following ports, which can be used by various clustering components: TCP ports 2224, 3121, and 21064, and UDP port 5405.
Install the pacemaker_remote daemon on the remote node.
```
yum install -y pacemaker-remote resource-agents pcs
```
```
# yum install -y pacemaker-remote resource-agents pcs
```
Copy to Clipboard Toggle word wrap
All nodes (both cluster nodes and remote nodes) must have the same authentication key installed for the communication to work correctly. If you already have a key on an existing node, use that key and copy it to the remote node. Otherwise, create a new key on the remote node.
Run the following set of commands on the remote node to create a directory for the authentication key with secure permissions.
```
mkdir -p --mode=0750 /etc/pacemaker
chgrp haclient /etc/pacemaker
```
```
# mkdir -p --mode=0750 /etc/pacemaker
# chgrp haclient /etc/pacemaker
```
Copy to Clipboard Toggle word wrap
The following command shows one method to create an encryption key on the remote node.
```
dd if=/dev/urandom of=/etc/pacemaker/authkey bs=4096 count=1
```
```
# dd if=/dev/urandom of=/etc/pacemaker/authkey bs=4096 count=1
```
Copy to Clipboard Toggle word wrap

Start and enable the pacemaker_remote daemon on the remote node.

systemctl enable pacemaker_remote.service
systemctl start pacemaker_remote.service

# systemctl enable pacemaker_remote.service
# systemctl start pacemaker_remote.service

Copy to Clipboard

Toggle word wrap

On the cluster node, create a location for the shared authentication key with the same path as the authentication key on the remote node and copy the key into that directory. In this example, the key is copied from the remote node where the key was created.
```
mkdir -p --mode=0750 /etc/pacemaker
chgrp haclient /etc/pacemaker
scp remote1:/etc/pacemaker/authkey /etc/pacemaker/authkey
```
```
# mkdir -p --mode=0750 /etc/pacemaker
# chgrp haclient /etc/pacemaker
# scp remote1:/etc/pacemaker/authkey /etc/pacemaker/authkey
```
Copy to Clipboard Toggle word wrap
Run the following command from a cluster node to create a remote resource. In this case the remote node is remote1.
```
pcs resource create remote1 ocf:pacemaker:remote
```
```
# pcs resource create remote1 ocf:pacemaker:remote
```
Copy to Clipboard Toggle word wrap
After creating the remote resource, you can treat the remote node just as you would treat any other node in the cluster. For example, you can create a resource and place a resource constraint on the resource to run on the remote node as in the following commands, which are run from a cluster node.
```
pcs resource create webserver apache configfile=/etc/httpd/conf/httpd.conf op monitor interval=30s
pcs constraint location webserver prefers remote1
```
```
# pcs resource create webserver apache configfile=/etc/httpd/conf/httpd.conf op monitor interval=30s
# pcs constraint location webserver prefers remote1
```
Copy to Clipboard Toggle word wrap
Warning
Never involve a remote node connection resource in a resource group, colocation constraint, or order constraint.
Configure fencing resources for the remote node. Remote nodes are fenced the same way as cluster nodes. Configure fencing resources for use with remote nodes the same as you would with cluster nodes. Note, however, that remote nodes can never initiate a fencing action. Only cluster nodes are capable of actually executing a fencing operation against another node.

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

8.4.6. Configuration Overview: Remote Node

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat 소개

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links