Chapter 15. Network Booting with libvirt

Procedure 15.1. Configuring the PXE boot server

1. Place the PXE boot images and configuration in /var/lib/tftp.
2. Run the following commands:

   # virsh net-destroy default
   # virsh net-edit default

   Copy to Clipboard Toggle word wrap
3. Edit the <ip> element in the configuration file for the default network to include the appropriate address, network mask, DHCP address range, and boot file, where BOOT_FILENAME represents the file name you are using to boot the guest virtual machine.

   <ip address='192.168.122.1' netmask='255.255.255.0'>
      <tftp root='/var/lib/tftp' />
      <dhcp>
         <range start='192.168.122.2' end='192.168.122.254' />
         <bootp file='BOOT_FILENAME' />
      </dhcp>
   </ip>

   Copy to Clipboard Toggle word wrap
4. Boot the guest using PXE (refer to Section 15.2, “Booting a Guest Using PXE”).