홈
제품
Red Hat OpenStack Platform
10
Manual Installation Procedures
18.3. Extend the Tenant Network for the Benchmarking Service

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

18.3. Extend the Tenant Network for the Benchmarking Service

The following procedure is optional and required only if the Benchmarking service scenario being run requires a direct access (ssh) to the guest. When running the NovaServers.boot_server scenario, extending the tenant network is not required as this is specific scenario does not ssh into the guests but simple launches the guests.

Perform the following steps on your Controller node, unless otherwise specified.

If your Red Hat OpenStack Platform deployment does not have any floating point IPs available, extend the Tenant network to the rally host. Run the following command to install the OpenStack Networking OpenvSwitch agent package:
```
yum install openstack-neutron-openvswitch
```
```
# yum install openstack-neutron-openvswitch
```
Copy to Clipboard Toggle word wrap
Copy the OpenStack Networking configuration files from the Compute node to the Controller node:
```
scp COMPUTE_NODE_IP:/etc/neutron/* /etc/neutron
```
```
# scp COMPUTE_NODE_IP:/etc/neutron/* /etc/neutron
```
Copy to Clipboard Toggle word wrap
Set an IP address to the interface that would have been associated with the Tenant network had it been part of the OpenStack cluster.

Edit the ovs_neutron_plugin.ini file and change the local_ip to the IP address that resides on the Tenant network:

[OVS]
vxlan_udp_port=4789
network_vlan_ranges=
tunnel_type=vxlan
tunnel_id_ranges=1:1000
tenant_network_type=vxlan
local_ip=IP_WITHIN_TENANT_NETWORK
enable_tunneling=True
integration_bridge=br-int
tunnel_bridge=br-tu

[OVS]
vxlan_udp_port=4789
network_vlan_ranges=
tunnel_type=vxlan
tunnel_id_ranges=1:1000
tenant_network_type=vxlan
local_ip=IP_WITHIN_TENANT_NETWORK
enable_tunneling=True
integration_bridge=br-int
tunnel_bridge=br-tu

Copy to Clipboard

Toggle word wrap

Edit the /etc/neutron/plugin.ini file and change the local_ip to the IP address that resides on the Tenant network:

[OVS]
vxlan_udp_port=4789
network_vlan_ranges=
tunnel_type=vxlan
tunnel_id_ranges=1:1000
tenant_network_type=vxlan
local_ip=IP_WITHIN_TENANT_NETWORK
enable_tunneling=True
integration_bridge=br-int
tunnel_bridge=br-tun

[OVS]
vxlan_udp_port=4789
network_vlan_ranges=
tunnel_type=vxlan
tunnel_id_ranges=1:1000
tenant_network_type=vxlan
local_ip=IP_WITHIN_TENANT_NETWORK
enable_tunneling=True
integration_bridge=br-int
tunnel_bridge=br-tun

Copy to Clipboard

Toggle word wrap

Restart the neutron-openvswitch-agent:

systemctl restart openvswitch
systemctl restart neutron-openvswitch-agent

# systemctl restart openvswitch
# systemctl restart neutron-openvswitch-agent

Copy to Clipboard

Toggle word wrap

On the Controller node, verify the agent is properly setup by using the neutron agent-list command:

neutron agent-list

# neutron agent-list
... Output Abbreviated ... ]
| 8578499b-0873-47a9-9cae-9884d4abf768 | Open vSwitch agent | Controller_Host | :-) | True | neutron-openvswitch-agent

Copy to Clipboard

Toggle word wrap

On the Controller node, create the variables netid and hostid with the following information:

netid=PRIVATE_NETWORK_ID
echo $netid
hostid=CONTROLLER_NODE_HOSTNAME
echo $hostid

# netid=PRIVATE_NETWORK_ID
# echo $netid
# hostid=CONTROLLER_NODE_HOSTNAME
# echo $hostid

Copy to Clipboard

Toggle word wrap

On the Controller node, create a neutron port labelled rally-port that binds to the host_id and creates the port within the network of the associated netid.

neutron port-create --name rally-port --binding:host_id=$hostid $netid

# neutron port-create --name rally-port --binding:host_id=$hostid $netid
Created a new port:
+-----------------------
+---------------------------------------------------------------------------------+
| Field                 | Value
|
+-----------------------
+---------------------------------------------------------------------------------+
| admin_state_up        | True
|
| allowed_address_pairs |
|
| binding:host_id       | VISIONING_HOST                                          |
| binding:profile       | {}
|
| binding:vif_details   | {"port_filter": true, "ovs_hybrid_plug": true}
|
| binding:vif_type      | ovs
|
| binding:vnic_type     | normal
|
| device_id             |
|
| device_owner          |
|
| extra_dhcp_opts       |
|
| fixed_ips             | {"subnet_id": "5279a66d-a5f5-4639-b664-163c39f26838", "ip_address": "10.1.0.2"}
|
| id                    | 0a9e54da-6588-42ce-9011-d637c3387670
|
| mac_address           | fa:16:3e:44:c3:d9
|
| name                  | rally-port                                                                  |
| network_id            | 1cd7ae4f-d057-41bd-8c56-557771bf9f73
|
| security_groups       | 76fe37c7-debb-46b4-a57a-d7dbb9dfd0ed
|
| status                | DOWN
|
| tenant_id             | 6f98906137a2421da579d4e70714cac6
|
+-----------------------
+---------------------------------------------------------------------------------+

Copy to Clipboard

Toggle word wrap

Within the Controller node, modify the rally virtual machine XML with the following:

virsh edit rally

# virsh edit rally
...
   <interface type='bridge'>
     <mac address='fa:16:3e:1a:3b:f1'/>
     <source bridge='br-int'/>
     <virtualport type='openvswitch'>
       <parameters interfaceid='neutron-port-id'/>
     </virtualport>
     <target dev='vnet4'/>
     <model type='virtio'/>
     <alias name='net1'/>
     <address type='pci' domain='0x0000' bus='0x00' slot='0x0f' function='0x0'/>
   </interface>
...

Copy to Clipboard

Toggle word wrap

Note

Make sure you update the neutron-port-id with the id located in the previous step when creating the rally-port.

After the XML file changes have been applied to the rally guest, reboot the guest.

맨 위로 이동

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

18.3. Extend the Tenant Network for the Benchmarking Service

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat 소개

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links