Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 7. Performance

Red Hat OpenStack Platform 10 director configures the Compute nodes to enforce resource partitioning and fine tuning to achieve line rate performance for the guest VNFs. The key performance factors in the NFV use case are throughput, latency and jitter.

DPDK-accelerated OVS enables high performance packet switching between physical NICs and virtual machines. OVS 2.5 with DPDK 2.2 adds support for vhost-user multiqueue allowing scalable performance. OVS-DPDK provides line rate performance for guest VNFs.

SR-IOV networking provides enhanced performance characteristics, including improved throughput for specific networks and virtual machines.

Other important features for performance tuning include huge pages, NUMA alignment, host isolation and CPU pinning. VNF flavors require huge pages for better performance. Host isolation and CPU pinning improve NFV performance and prevent spurious packet loss.

For more details on these features and performance tuning for NFV, see NFV Tuning for Performance.

7.1. Configuring RX/TX queue size
링크 복사

You can experience packet loss at high packet rates above 3.5mpps for many reasons, such as:

  • a network interrupt
  • a SMI
  • packet processing latency in the Virtual Network Function

To prevent packet loss, increase the queue size from the default of 256 to a maximum of 1024.

Prerequisites

  • To configure RX, ensure that you have libvirt v2.3 and QEMU v2.7.
  • To configure TX, ensure that you have libvirt v3.7 and QEMU v2.10.

Procedure

  • To increase the RX and TX queue size, include the following lines in the parameter_defaults: section of a relevant director role. Here is an example with ComputeOvsDpdk role: 

    parameter_defaults:
  ComputeOvsDpdkParameters:
    -NovaLibvirtRxQueueSize: 1024
    -NovaLibvirtTxQueueSize: 1024

Testing

  • You can observe the values for RX queue size and TX queue size in the nova.conf file: 

    [libvirt]
rx_queue_size=1024
tx_queue_size=1024

  • You can check the values for RX queue size and TX queue size in the VM instance XML file generated by libvirt on the compute host. 

    <devices>
   <interface type='vhostuser'>
     <mac address='56:48:4f:4d:5e:6f'/>
     <source type='unix' path='/tmp/vhost-user1' mode='server'/>
     <model type='virtio'/>
     <driver name='vhost' rx_queue_size='1024'   tx_queue_size='1024' />
     <address type='pci' domain='0x0000' bus='0x00' slot='0x10' function='0x0'/>
   </interface>
</devices>

    To verify the values for RX queue size and TX queue size, use the following command on a KVM host: 

    $ virsh dumpxml <vm name> | grep queue_size
  • You can check for improved performance, such as 3.8 mpps/core at 0 frame loss.
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

Legal Notice

Theme

© 2026 Red Hat맨 위로 이동