이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 6. Addressing volume size discrepancies with Dell EqualLogic back ends


When Dell EqualLogic (EQL) back ends report volume sizes, they also assess the additional storage that they require for internal volume metadata. This total size is slightly larger than the volume size that the Block Storage services report. However, the volume size that EQL back ends report is the same size that the Image service uses.

As a result, when you create an image-backed volume on an EQL back end, first check the size of the image. If the image was originally volume-backed, then EQL and the Image service report a volume size slightly larger than the Block Storage service reports.

If the image size reported by EQL is slightly larger, then you must accommodate the size discrepancy when you create volumes backed by this image.

6.1. Example Dell EqualLogic volume size discrepancy

To illustrate, when you create a 1GB volume:

# cinder create --display-name vol1 1

+---------------------+--------------------------------------+
|       Property      |                Value                 |
+---------------------+--------------------------------------+
|     attachments     |                  []                  |
|  availability_zone  |                 nova                 |
|       bootable      |                false                 |
|      created_at     |      2014-12-19T03:57:47.730359      |
| display_description |                 None                 |
|     display_name    |                 vol1                 |
|      encrypted      |                False                 |
|          id         | 6bdace69-bd41-42fc-a63a-f834fb65a2e4 |
|       metadata      |                  {}                  |
|         size        |                  1                   |
|     snapshot_id     |                 None                 |
|     source_volid    |                 None                 |
|        status       |               creating               |
|     volume_type     |                 None                 |
+---------------------+--------------------------------------+

The Block Storage service reports a volume size of 1GB, but on the EQL array the size (VolReserve) is slightly bigger:

eql> volume select volume-6bdace69-bd41-42fc-a63a-f834fb65a2e4

eql (volume-6bdace69-bd41-42fc-a63a-f834fb65a2e4)> show

_______________________________ Volume Information ______...
Name: volume-6bdace69-bd41-42fc-a63a-f834fb65a2e4
Size: 1GB
VolReserve: 1.01GB
...

When you create a new image from this volume, the Block Storage service reports the correct volume size of 1GB:

# cinder upload-to-image --disk-format raw --container-format bare vol1 image_vol1

+---------------------+--------------------------------------+
|       Property      |                Value                 |
+---------------------+--------------------------------------+
|   container_format  |                 bare                 |
|     disk_format     |                 raw                  |
| display_description |                 None                 |
|          id         | 6bdace69-bd41-42fc-a63a-f834fb65a2e4 |
|       image_id      | c65f7eae-e2c1-44ba-8af1-e33695897559 |
|      image_name     |              image_vol1              |
|         size        |                  1                   |
|        status       |              uploading               |
|      updated_at     |      2014-12-19T03:57:48.000000      |
|     volume_type     |                 None                 |
+---------------------+--------------------------------------+

However, the Image service reports a slightly larger size:

# glance image-list

...+------------+-------------+------------------+------------+--------+
...| Name       | Disk Format | Container Format | Size       | Status |
...+------------+-------------+------------------+------------+--------+
...| image_vol1 | raw         | bare             | 1085276160 | active |
...+------------+-------------+------------------+------------+--------+

The glance tool reports an image size of approximately 1.01GB. As a result, you cannot create a new 1GB volume backed by this image:

# cinder create --display-name vol2 --image-id c65f7eae-e2c1-44ba-8af1-e33695897559 1

ERROR: Invalid input received: Size of specified image 2 is larger than volume size 1

6.2. Workaround for Dell EqualLogic volume size discrepancy

You must consider the discrepancy between the volume sizes reported by the Image and the Block Storage services when you specify the size of image-backed volumes. This means that when you specify the size of the image-backed volume, you must use the next whole number after the image size reported by the Image service (glance).

In Section 6.1, “Example Dell EqualLogic volume size discrepancy”, the Image service reports an image size of 1.01GB. This means that when you create a volume, you must specify a volume size of 2GB instead of 1GB:

# cinder create --display-name vol2 --image-id c65f7eae-e2c1-44ba-8af1-e33695897559 2

+---------------------+--------------------------------------+
|       Property      |                Value                 |
+---------------------+--------------------------------------+
|     attachments     |                  []                  |
|  availability_zone  |                 nova                 |
|       bootable      |                false                 |
|      created_at     |      2014-12-19T04:54:07.036260      |
| display_description |                 None                 |
|     display_name    |                 vol2                 |
|      encrypted      |                False                 |
|          id         | fcf49715-094d-4bba-9f05-8b7fa6deffce |
|       image_id      | c65f7eae-e2c1-44ba-8af1-e33695897559 |
|       metadata      |                  {}                  |
|         size        |                  2                   |
|     snapshot_id     |                 None                 |
|     source_volid    |                 None                 |
|        status       |               creating               |
|     volume_type     |                 None                 |
+---------------------+--------------------------------------+
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2026 Red Hat
맨 위로 이동