이 콘텐츠는 선택한 언어로 제공되지 않습니다.

8.4. Creating the Overcloud Provider Network


A provider network is a network attached physically to a network existing outside of the deployed Overcloud. This can be an existing infrastructure network or a network that provides external access directly to instances through routing instead of floating IPs.
When creating a provider network, you associate it with a physical network, which uses a bridge mapping. This is similar to floating IP network creation. You add the provider network to both the Controller and the Compute nodes because the Compute nodes attach VM virtual network interfaces directly to the attached network interface.
For example, if the desired provider network is a VLAN on the br-ex bridge, use the following command to add a provider network on VLAN 201:
$ neutron net-create --provider:physical_network datacentre --provider:network_type vlan --provider:segmentation_id 201 --shared provider_network
This command creates a shared network. It is also possible to specify a tenant instead of specifying --shared. That network will only be available to the specified tenant. If you mark a provider network as external, only the operator may create ports on that network.
Add a subnet to a provider network if you want neutron to provide DHCP services to the tenant instances:
$ neutron subnet-create --name provider-subnet --enable_dhcp=True --allocation-pool start=10.9.101.50,end=10.9.101.100 --gateway 10.9.101.254 provider_network 10.9.101.0/24
Red Hat logoGithubRedditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

© 2024 Red Hat, Inc.