이 콘텐츠는 선택한 언어로 제공되지 않습니다.

B.4. Fujitsu Integrated Remote Management Controller (iRMC)


Fujitsu's iRMC is a Baseboard Management Controller (BMC) with integrated LAN connection and extended functionality. This driver focuses on the power management for bare metal systems connected to the iRMC.

Important

iRMC S4 or higher is required.
pm_type
Set this option to pxe_irmc.
pm_user, pm_password
The username and password for the iRMC interface.
pm_addr
The IP address of the iRMC interface.
pm_port (Optional)
The port to use for iRMC operations. The default is 443.
pm_auth_method (Optional)
The authentication method for iRMC operations. Use either basic or digest. The default is basic
pm_client_timeout (Optional)
Timeout (in seconds) for iRMC operations. The default is 60 seconds.
pm_sensor_method (Optional)
Sensor data retrieval method. Use either ipmitool or scci. The default is ipmitool.

Additional Notes

  • Edit the /etc/ironic/ironic.conf file and add pxe_irmc to the enabled_drivers option to enable this driver.
  • The director also requires an additional set of utilities if you enabled SCCI as the sensor method. Install the python-scciclient package and restart the openstack-ironic-conductor service:
    $ yum install python-scciclient
    $ sudo systemctl restart openstack-ironic-conductor.service
    
Red Hat logoGithubRedditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

© 2024 Red Hat, Inc.